Attachment 17911 Details for Bug 16850 – dmesg

dmesg

kernel (text/plain), 20.76 KB, created by Nikos Chantziaras on 2008-07-27 03:05:16 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Nikos Chantziaras

Created: 2008-07-27 03:05:16 UTC

Size: 20.76 KB

patch

obsolete

>Linux version 2.6.26-gentoo (root@gentoo) (gcc version 4.3.1 (Gentoo 4.3.1-r1 p1.1) ) #7 SMP Sun Jul 27 12:45:16 EEST 2008
>Command line: root=/dev/sdc1 vga=0x031b video=vesafb:mtrr:0,ywrap splash=silent,fadein,fadeout,theme:livecd-2007.0 console=tty1 softlevel=native
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
> BIOS-e820: 000000007ffb0000 - 000000007ffc0000 (ACPI data)
> BIOS-e820: 000000007ffc0000 - 000000007fff0000 (ACPI NVS)
> BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 256 used
>Entering add_active_range(0, 256, 524208) 1 entries of 256 used
>max_pfn_mapped = 1048576
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>init_memory_mapping
>DMI present.
>ACPI: RSDP 000F7E10, 0014 (r0 ACPIAM)
>ACPI: RSDT 7FFB0000, 0034 (r1 A_M_I  OEMRSDT   8000702 MSFT       97)
>ACPI: FACP 7FFB0200, 0084 (r2 A_M_I  OEMFACP   8000702 MSFT       97)
>ACPI: DSDT 7FFB0450, 4AED (r1  4CDVT 4CDVT200      200 INTL  2002026)
>ACPI: FACS 7FFC0000, 0040
>ACPI: APIC 7FFB0390, 0078 (r1 A_M_I  OEMAPIC   8000702 MSFT       97)
>ACPI: MCFG 7FFB0410, 003C (r1 A_M_I  OEMMCFG   8000702 MSFT       97)
>ACPI: OEMB 7FFC0040, 0051 (r1 A_M_I  AMI_OEM   8000702 MSFT       97)
>Entering add_active_range(0, 0, 159) 0 entries of 256 used
>Entering add_active_range(0, 256, 524208) 1 entries of 256 used
>  early res: 0 [0-fff] BIOS data page
>  early res: 1 [6000-7fff] TRAMPOLINE
>  early res: 2 [200000-6ee9cb] TEXT DATA BSS
>  early res: 3 [37f5f000-37fef274] RAMDISK
>  early res: 4 [9d400-fffff] BIOS reserved
>  early res: 5 [8000-bfff] PGTABLE
> [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff810001200000-ffff810002dfffff] on node 0
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   524208
>On node 0 totalpages: 524111
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1369 pages reserved
>  DMA zone: 2574 pages, LIFO batch:0
>  DMA32 zone: 7111 pages used for memmap
>  DMA32 zone: 513001 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
>IOAPIC[1]: apic_id 3, version 0, address 0xfecc0000, GSI 24-47
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
>PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 33712 bytes of per cpu data
>NR_CPUS: 2, nr_cpu_ids: 2
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 515575
>Kernel command line: root=/dev/sdc1 vga=0x031b video=vesafb:mtrr:0,ywrap splash=silent,fadein,fadeout,theme:livecd-2007.0 console=tty1 softlevel=native
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC calibrated against PM_TIMER
>time.c: Detected 2440.927 MHz processor.
>Console: colour dummy device 80x25
>console [tty1] enabled
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Checking aperture...
>Memory: 2058108k/2096832k available (3207k kernel code, 37636k reserved, 1212k data, 260k init)
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 4883.40 BogoMIPS (lpj=2441702)
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>ACPI: Core revision 20080321
>CPU0: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz stepping 06
>Using local APIC timer interrupts.
>APIC timer calibration result 16950892
>Detected 16.950 MHz APIC timer.
>Booting processor 1/1 ip 6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4881.65 BogoMIPS (lpj=2440826)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz stepping 06
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>Total of 2 processors activated (9765.05 BogoMIPS).
>net_namespace: 360 bytes
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1 for base access
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
>PCI: Using MMCONFIG at e0000000 - efffffff
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
>ACPI: PCI Root Bridge [PCI1] (0000:80)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI-GART: No AMD northbridge found.
>ACPI: RTC can wake from S4
>system 00:05: ioport range 0x295-0x296 has been reserved
>system 00:05: ioport range 0x3e0-0x3e7 has been reserved
>system 00:05: ioport range 0x4d0-0x4d1 has been reserved
>system 00:05: ioport range 0x800-0x87f has been reserved
>system 00:05: ioport range 0x400-0x41f has been reserved
>system 00:05: iomem range 0xfffffff0-0xffffffff could not be reserved
>system 00:05: iomem range 0xffb80000-0xffbfffff could not be reserved
>system 00:06: iomem range 0xfec00000-0xfec00fff has been reserved
>system 00:06: iomem range 0xfee00000-0xfee00fff could not be reserved
>system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:0a: iomem range 0x0-0x9ffff could not be reserved
>system 00:0a: iomem range 0xc0000-0xcffff has been reserved
>system 00:0a: iomem range 0xe0000-0xfffff could not be reserved
>system 00:0a: iomem range 0x100000-0x7fffffff could not be reserved
>system 00:0a: iomem range 0xfff80000-0xffffffff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: 0xff300000-0xff3fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:02.0
>  IO window: a000-cfff
>  MEM window: 0xff400000-0xff4fffff
>  PREFETCH window: 0x00000000bff00000-0x00000000dfefffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 27
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs... it is
>Freeing initrd memory: 576k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1217162839.236:1): initialized
>fuse init (API version 7.9)
>msgmni has been set to 4022
>io scheduler noop registered
>io scheduler cfq registered (default)
>PCI: VIA PCI bridge detected.Disabling DAC.
>pci 0000:02:00.0: Boot video device
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>Allocate Port Service[0000:00:02.0:pcie01]
>Allocate Port Service[0000:00:02.0:pcie02]
>Allocate Port Service[0000:00:02.0:pcie03]
>Load service driver aer on pcie device 0000:00:02.0:pcie01
>Linux agpgart interface v0.103
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 24 (level, low) -> IRQ 24
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>[drm] Initialized radeon 1.29.0 20080528 on minor 0
>vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20010100000, using 10240k, total 16384k
>vesafb: mode is 1280x1024x32, linelength=5120, pages=2
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
>Console: switching to colour frame buffer device 160x64
>fbcondecor: console 0 using theme 'livecd-2007.0'
>fbcondecor: switched decor state to 'on' on console 0
>fb0: VESA VGA frame buffer device
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>ACPI: Power Button (CM) [PWRB]
>ACPI: SSDT 7FFC00A0, 01D2 (r1    AMI   CPU1PM        1 INTL 20051117)
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: SSDT 7FFC0280, 0143 (r1    AMI   CPU2PM        1 INTL 20051117)
>ACPI: ACPI0007:01 is registered as cooling_device1
>brd: module loaded
>loop: module loaded
>via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23
>eth0: VIA Rhine II at 0x1d800, 00:19:66:17:0a:e9, IRQ 23.
>eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 41e1.
>Driver 'sd' needs updating - please use bus_type methods
>Driver 'sr' needs updating - please use bus_type methods
>sata_via 0000:00:0f.0: version 2.3
>ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 21
>sata_via 0000:00:0f.0: routed to hard irq line 11
>scsi0 : sata_via
>scsi1 : sata_via
>ata1: SATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 21
>ata2: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 21
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>ata1.00: ATA-8: ST3500320AS, SD15, max UDMA/133
>ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/133
>ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
>isa bounce pool size: 16 pages
>scsi 0:0:0:0: Direct-Access     ATA      ST3500320AS      SD15 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1
>sd 0:0:0:0: [sda] Attached SCSI disk
>pata_via 0000:00:0f.1: version 0.3.3
>scsi2 : pata_via
>scsi3 : pata_via
>ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
>ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
>ata3.00: ATA-6: WDC WD2000JB-00GVA0, 08.02D08, max UDMA/100
>ata3.00: 390721968 sectors, multi 16: LBA48 
>ata3.01: ATA-6: ST340014A, 3.06, max UDMA/100
>ata3.01: 78165360 sectors, multi 16: LBA48 
>ata3.00: configured for UDMA/100
>ata3.01: configured for UDMA/100
>ata4.00: ATAPI: _NEC DVD_RW ND-3520AW, 3.07, max UDMA/33
>ata4.00: configured for UDMA/33
>scsi 2:0:0:0: Direct-Access     ATA      WDC WD2000JB-00G 08.0 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdb] 390721968 512-byte hardware sectors (200050 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sdb] 390721968 512-byte hardware sectors (200050 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 2:0:0:0: [sdb] Attached SCSI disk
>scsi 2:0:1:0: Direct-Access     ATA      ST340014A        3.06 PQ: 0 ANSI: 5
>sd 2:0:1:0: [sdc] 78165360 512-byte hardware sectors (40021 MB)
>sd 2:0:1:0: [sdc] Write Protect is off
>sd 2:0:1:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:1:0: [sdc] 78165360 512-byte hardware sectors (40021 MB)
>sd 2:0:1:0: [sdc] Write Protect is off
>sd 2:0:1:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1 sdc2
>sd 2:0:1:0: [sdc] Attached SCSI disk
>scsi 3:0:0:0: CD-ROM            _NEC     DVD_RW ND-3520AW 3.07 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 3:0:0:0: Attached scsi CD-ROM sr0
>ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
>ehci_hcd 0000:00:10.4: EHCI Host Controller
>ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:10.4: irq 21, io mem 0xff6ff800
>ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 20
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:10.0: irq 20, io base 0x0000d080
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 22 (level, low) -> IRQ 22
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:10.1: irq 22, io base 0x0000d400
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.2: UHCI Host Controller
>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d480
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:10.3: UHCI Host Controller
>uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:10.3: irq 23, io base 0x0000dc00
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: PC Speaker as /devices/platform/pcspkr/input/input2
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k
>i2c /dev entries driver
>w83627hf: Found W83697HF chip at 0x290
>input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
>coretemp coretemp.0: Using relative temperature scale!
>coretemp coretemp.1: Using relative temperature scale!
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>NET: Registered protocol family 15
>SCTP: Hash tables configured (established 65536 bind 65536)
>rtc_cmos 00:02: setting system clock to 2008-07-27 12:47:22 UTC (1217162842)
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>VFS: Mounted root (ext3 filesystem) readonly.
>Freeing unused kernel memory: 260k freed
>EXT3 FS on sdc1, internal journal
>Adding 996020k swap on /dev/sdc2.  Priority:-1 extents:1 across:996020k
>fbcondecor: console 1 using theme 'livecd-2007.0'
>fbcondecor: switched decor state to 'on' on console 1
>fbcondecor: console 2 using theme 'livecd-2007.0'
>fbcondecor: switched decor state to 'on' on console 2
>fbcondecor: console 3 using theme 'livecd-2007.0'
>fbcondecor: switched decor state to 'on' on console 3
>fbcondecor: console 4 using theme 'livecd-2007.0'
>fbcondecor: switched decor state to 'on' on console 4
>fbcondecor: console 5 using theme 'livecd-2007.0'
>fbcondecor: switched decor state to 'on' on console 5
>fbcondecor: console 6 using theme 'livecd-2007.0'
>fbcondecor: switched decor state to 'on' on console 6
>fbcondecor: console 7 using theme 'livecd-2007.0'
>fbcondecor: switched decor state to 'on' on console 7
>fbcondecor: console 8 using theme 'livecd-2007.0'
>fbcondecor: switched decor state to 'on' on console 8
>fbcondecor: console 9 using theme 'livecd-2007.0'
>fbcondecor: switched decor state to 'on' on console 9
>fbcondecor: console 10 using theme 'livecd-2007.0'
>fbcondecor: switched decor state to 'on' on console 10
>firmware: requesting intel-ucode/06-0f-06
>firmware: requesting intel-ucode/06-0f-06
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>microcode: CPU0 updated from revision 0xc6 to 0xcb, date = 09162007 
>microcode: CPU1 updated from revision 0xc6 to 0xcb, date = 09162007 
>eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
>fbcondecor: console 0 using theme 'livecd-2007.0'
>fbcondecor: switched decor state to 'on' on console 0
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 19
>[drm] Setting GART location based on new memory map
>[drm] Loading R500 Microcode
>[drm] Num pipes: 4
>[drm] writeback test succeeded in 1 usecs
>[drm] Num pipes: 4
>+------ PCI-Express Device Error ------+
>Error Severity		: Uncorrected (Non-Fatal)
>PCIE Bus Error type	: Transaction Layer
>Flow Control Protocol 	: First
>Receiver ID		: 0010
>VendorID=1106h, DeviceID=a208h, Bus=00h, Device=02h, Function=00h
>Broadcast error_detected message
>Broadcast mmio_enabled message
>Broadcast resume message
>AER driver successfully recovered
>fbcondecor: console 6 using theme 'livecd-2007.0'
>fbcondecor: switched decor state to 'on' on console 6
>[drm] Loading R500 Microcode
>[drm] Num pipes: 4
>[drm] Num pipes: 4
>+------ PCI-Express Device Error ------+
>Error Severity		: Uncorrected (Non-Fatal)
>PCIE Bus Error type	: Transaction Layer
>Flow Control Protocol 	: First
>Receiver ID		: 0010
>VendorID=1106h, DeviceID=a208h, Bus=00h, Device=02h, Function=00h
>Broadcast error_detected message
>Broadcast mmio_enabled message
>Broadcast resume message
>AER driver successfully recovered
>+------ PCI-Express Device Error ------+
>Error Severity		: Uncorrected (Non-Fatal)
>PCIE Bus Error type	: Transaction Layer
>Flow Control Protocol 	: First
>Receiver ID		: 0010
>VendorID=1106h, DeviceID=a208h, Bus=00h, Device=02h, Function=00h
>Broadcast error_detected message
>Broadcast mmio_enabled message
>Broadcast resume message
>AER driver successfully recovered
>[drm] Loading R500 Microcode
>[drm] Num pipes: 4
>+------ PCI-Express Device Error ------+
>Error Severity		: Uncorrected (Non-Fatal)
>PCIE Bus Error type	: Transaction Layer
>Flow Control Protocol 	: Multiple
>Receiver ID		: 0010
>VendorID=1106h, DeviceID=a208h, Bus=00h, Device=02h, Function=00h
>Broadcast error_detected message
>Broadcast mmio_enabled message
>Broadcast resume message
>AER driver successfully recovered

Actions: View

Attachments on bug 16850: 17897 | 17898 | 17911 | 17912

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.