Attachment 18304 Details for Bug 17085 – dmesg output with debugging enabled

dmesg output with debugging enabled

dmesg-output (text/plain), 37.88 KB, created by Tomas Carnecky on 2008-08-15 14:45:39 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Tomas Carnecky

Created: 2008-08-15 14:45:39 UTC

Size: 37.88 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.27-rc3-00227-g54b288f (tomc@fu) (gcc version 4.2.4 (Gentoo 4.2.4 p1.0)) #22 SMP PREEMPT Fri Aug 15 23:30:39 CEST 2008
>Command line: BOOT_IMAGE=linux-2.6.git ro root=802 resume=/dev/sda4 acpi_sleep=s3_bios,s3_mode thinkpad_acpi.fan_control=1
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
> BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007d6b0000 (usable)
> BIOS-e820: 000000007d6b0000 - 000000007d6cc000 (ACPI data)
> BIOS-e820: 000000007d6cc000 - 000000007d700000 (ACPI NVS)
> BIOS-e820: 000000007d700000 - 000000007e000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>last_pfn = 0x7d6b0 max_arch_pfn = 0x3ffffffff
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>init_memory_mapping
> 0000000000 - 007d600000 page 2M
> 007d600000 - 007d6b0000 page 4k
>kernel direct mapping tables up to 7d6b0000 @ 8000-c000
>last_map_addr: 7d6b0000 end: 7d6b0000
>DMI present.
>ACPI: RSDP 000F6950, 0024 (r2 LENOVO)
>ACPI: XSDT 7D6BCE48, 0094 (r1 LENOVO TP-7S        1100  LTP        0)
>ACPI: FACP 7D6BCF00, 00F4 (r3 LENOVO TP-7S        1100 LNVO        1)
>ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20080609]
>ACPI: DSDT 7D6BD2DB, E84A (r1 LENOVO TP-7S        1100 MSFT  3000000)
>ACPI: FACS 7D6E4000, 0040
>ACPI: SSDT 7D6BD0B4, 0227 (r1 LENOVO TP-7S        1100 MSFT  3000000)
>ACPI: ECDT 7D6CBB25, 0052 (r1 LENOVO TP-7S        1100 LNVO        1)
>ACPI: TCPA 7D6CBB77, 0032 (r2 LENOVO TP-7S        1100 LNVO        1)
>ACPI: APIC 7D6CBBA9, 0068 (r1 LENOVO TP-7S        1100 LNVO        1)
>ACPI: MCFG 7D6CBC11, 003C (r1 LENOVO TP-7S        1100 LNVO        1)
>ACPI: HPET 7D6CBC4D, 0038 (r1 LENOVO TP-7S        1100 LNVO        1)
>ACPI: SLIC 7D6CBDF0, 0176 (r1 LENOVO TP-7S        1100  LTP        0)
>ACPI: BOOT 7D6CBF66, 0028 (r1 LENOVO TP-7S        1100  LTP        1)
>ACPI: ASF! 7D6CBF8E, 0072 (r16 LENOVO TP-7S        1100 PTL         1)
>ACPI: SSDT 7D6E2697, 025F (r1 LENOVO TP-7S        1100 INTL 20050513)
>ACPI: SSDT 7D6E28F6, 00A6 (r1 LENOVO TP-7S        1100 INTL 20050513)
>ACPI: SSDT 7D6E299C, 04F7 (r1 LENOVO TP-7S        1100 INTL 20050513)
>ACPI: SSDT 7D6E2E93, 01D8 (r1 LENOVO TP-7S        1100 INTL 20050513)
>ACPI: DMI detected: Lenovo ThinkPad X61
>ACPI: Added _OSI(Linux)
>(5 early reservations) ==> bootmem [0000000000 - 007d6b0000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0000200000 - 00009df094]    TEXT DATA BSS ==> [0000200000 - 00009df094]
>  #3 [000009d800 - 0000100000]    BIOS reserved ==> [000009d800 - 0000100000]
>  #4 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
>found SMP MP-table at [ffff8800000f6980] 000f6980
> [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00100000
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009d
>    0: 0x00000100 -> 0x0007d6b0
>On node 0 totalpages: 513613
>  DMA zone: 1821 pages, LIFO batch:0
>  DMA32 zone: 502648 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PM: Registered nosave memory: 000000000009d000 - 000000000009e000
>PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at 80000000 (gap: 7e000000:72000000)
>PERCPU: Allocating 47044 bytes of per cpu data
>NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 504469
>Kernel command line: BOOT_IMAGE=linux-2.6.git ro root=802 resume=/dev/sda4 acpi_sleep=s3_bios,s3_mode thinkpad_acpi.fan_control=1
>Initializing CPU#0
>Preemptible RCU implementation.
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Extended CMOS year: 2000
>TSC calibrated against PM_TIMER
>Detected 1596.009 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Checking aperture...
>No AGP bridge found
>Memory: 2013648k/2054848k available (4728k kernel code, 40116k reserved, 2331k data, 336k init)
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>hpet clockevent registered
>Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.01 BogoMIPS (lpj=1596009)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys debug
>Initializing cgroup subsys ns
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>ACPI: Core revision 20080609
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 Duo CPU     L7500  @ 1.60GHz stepping 0b
>Using local APIC timer interrupts.
>APIC timer calibration result 12468819
>Detected 12.468 MHz APIC timer.
>Booting processor 1/1 ip 6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3191.86 BogoMIPS (lpj=1595934)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: Intel(R) Core(TM)2 Duo CPU     L7500  @ 1.60GHz stepping 0b
>checking TSC synchronization [CPU#0 -> CPU#1]:
>Measured 261392 cycles TSC warp between CPUs, turning off TSC clock.
>Marking TSC unstable due to check_tsc_sync_source failed
>Brought up 2 CPUs
>Total of 2 processors activated (6383.88 BogoMIPS).
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 0 1
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 1 0
>net_namespace: 584 bytes
>NET: Registered protocol family 16
>ACPI: ACPI Dock Station Driver
>ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay
>ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler
>ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Is dependent on dock
>
>ACPI: Bay [\_SB_.PCI0.IDE0.PRIM.MSTR] Added
>ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
>PCI: MCFG area at f0000000 reserved in E820
>PCI: Using MMCONFIG at f0000000 - f3ffffff
>PCI: Using configuration type 1 for base access
>ACPI: EC: EC description table is found, configuring boot EC
>ACPI: BIOS _OSI(Linux) query honored via DMI
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in interrupt mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:19.0: PME# disabled
>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.7: PME# disabled
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:03:00.0: PME# disabled
>pci 0000:05:00.0: supports D1
>pci 0000:05:00.0: supports D2
>pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:05:00.0: PME# disabled
>pci 0000:05:00.1: supports D1
>pci 0000:05:00.1: supports D2
>pci 0000:05:00.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:05:00.1: PME# disabled
>pci 0000:05:00.2: supports D1
>pci 0000:05:00.2: supports D2
>pci 0000:05:00.2: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:05:00.2: PME# disabled
>pci 0000:00:1e.0: transparent bridge
>bus 00 -> node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: Power Resource [PUBS] (on)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:00: parse allocated resources
>pnp 00:00:   add mem 0x0-0x9ffff flags 0x1
>pnp 00:00:   add mem 0xc0000-0xc3fff flags 0x0
>pnp 00:00:   add mem 0xc4000-0xc7fff flags 0x0
>pnp 00:00:   add mem 0xc8000-0xcbfff flags 0x0
>pnp 00:00:   add mem 0xcc000-0xcffff flags 0x0
>pnp 00:00:   add mem 0xd0000-0xcffff flags 0x10000000
>pnp 00:00:   add mem 0xd4000-0xd3fff flags 0x10000000
>pnp 00:00:   add mem 0xd8000-0xd7fff flags 0x10000000
>pnp 00:00:   add mem 0xdc000-0xdbfff flags 0x10000000
>pnp 00:00:   add mem 0xe0000-0xe3fff flags 0x0
>pnp 00:00:   add mem 0xe4000-0xe7fff flags 0x0
>pnp 00:00:   add mem 0xe8000-0xebfff flags 0x0
>pnp 00:00:   add mem 0xec000-0xeffff flags 0x0
>pnp 00:00:   add mem 0xf0000-0xfffff flags 0x0
>pnp 00:00:   add mem 0x100000-0x7dffffff flags 0x1
>pnp 00:00:   add mem 0xfec00000-0xffffffff flags 0x0
>pnp 00:00:   add mem 0xfed4c000-0xfed4bfff flags 0x10000000
>pnp 00:00: PNP0c01: calling quirk_system_pci_resources+0x0/0x1a0
>pnp 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp 00:01: parse allocated resources
>pnp 00:01:   add io  0xcf8-0xcff flags 0x1
>pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
>pnp 00:02: parse allocated resources
>pnp 00:02:   add io  0x10-0x1f flags 0x1
>pnp 00:02:   add io  0x90-0x9f flags 0x1
>pnp 00:02:   add io  0x24-0x25 flags 0x1
>pnp 00:02:   add io  0x28-0x29 flags 0x1
>pnp 00:02:   add io  0x2c-0x2d flags 0x1
>pnp 00:02:   add io  0x30-0x31 flags 0x1
>pnp 00:02:   add io  0x34-0x35 flags 0x1
>pnp 00:02:   add io  0x38-0x39 flags 0x1
>pnp 00:02:   add io  0x3c-0x3d flags 0x1
>pnp 00:02:   add io  0xa4-0xa5 flags 0x1
>pnp 00:02:   add io  0xa8-0xa9 flags 0x1
>pnp 00:02:   add io  0xac-0xad flags 0x1
>pnp 00:02:   add io  0xb0-0xb5 flags 0x1
>pnp 00:02:   add io  0xb8-0xb9 flags 0x1
>pnp 00:02:   add io  0xbc-0xbd flags 0x1
>pnp 00:02:   add io  0x50-0x53 flags 0x1
>pnp 00:02:   add io  0x72-0x77 flags 0x1
>pnp 00:02:   add io  0x164e-0x164f flags 0x1
>pnp 00:02:   add io  0x2e-0x2f flags 0x1
>pnp 00:02:   add io  0x1000-0x107f flags 0x1
>pnp 00:02:   add io  0x1180-0x11bf flags 0x1
>pnp 00:02:   add io  0x800-0x80f flags 0x1
>pnp 00:02:   add io  0x15e0-0x15ef flags 0x1
>pnp 00:02:   add io  0x1600-0x165f flags 0x1
>pnp 00:02:   add mem 0xf0000000-0xf3ffffff flags 0x1
>pnp 00:02:   add mem 0xfed1c000-0xfed1ffff flags 0x1
>pnp 00:02:   add mem 0xfed14000-0xfed17fff flags 0x1
>pnp 00:02:   add mem 0xfed18000-0xfed18fff flags 0x1
>pnp 00:02:   add mem 0xfed19000-0xfed19fff flags 0x1
>pnp 00:02:   add mem 0xfed45000-0xfed4bfff flags 0x1
>pnp 00:02:   add mem 0xfed40000-0xfed44fff flags 0x1
>pnp 00:02: PNP0c02: calling quirk_system_pci_resources+0x0/0x1a0
>pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:03: parse allocated resources
>pnp 00:03:   add mem 0xfed00000-0xfed003ff flags 0x0
>pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
>pnp 00:04: parse allocated resources
>pnp 00:04:   add io  0x0-0xf flags 0x1
>pnp 00:04:   add io  0x80-0x8f flags 0x1
>pnp 00:04:   add io  0xc0-0xdf flags 0x1
>pnp 00:04:   add dma 4 flags 0x5
>pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:05: parse allocated resources
>pnp 00:05:   add io  0x61-0x61 flags 0x1
>pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
>pnp 00:06: parse allocated resources
>pnp 00:06:   add io  0xf0-0xf0 flags 0x1
>pnp 00:06:   add irq 13 flags 0x1
>pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:07: parse allocated resources
>pnp 00:07:   add io  0x70-0x71 flags 0x1
>pnp 00:07:   add irq 8 flags 0x1
>pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:08: parse allocated resources
>pnp 00:08:   add io  0x60-0x60 flags 0x1
>pnp 00:08:   add io  0x64-0x64 flags 0x1
>pnp 00:08:   add irq 1 flags 0x1
>pnp 00:08: Plug and Play ACPI device, IDs LEN0003 PNP0303 (active)
>pnp 00:09: parse allocated resources
>pnp 00:09:   add irq 12 flags 0x1
>pnp 00:09: Plug and Play ACPI device, IDs IBM3780 PNP0f13 (active)
>pnp 00:0a: parse resource options
>pnp 00:0a:   dependent set 0 (preferred) io  min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
>pnp 00:0a:   dependent set 0 (preferred) irq 4 flags 0x1
>pnp 00:0a:   dependent set 1 (acceptable) io  min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1
>pnp 00:0a:   dependent set 1 (acceptable) irq 3 flags 0x1
>pnp 00:0a:   dependent set 2 (acceptable) io  min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1
>pnp 00:0a:   dependent set 2 (acceptable) irq 4 flags 0x1
>pnp 00:0a:   dependent set 3 (acceptable) io  min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1
>pnp 00:0a:   dependent set 3 (acceptable) irq 3 flags 0x1
>pnp 00:0a:   dependent set 4 (functional) io  min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
>pnp 00:0a:   dependent set 4 (functional) irq 3 5 7 flags 0x1
>pnp 00:0a:   dependent set 5 (functional) io  min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1
>pnp 00:0a:   dependent set 5 (functional) irq 4 5 7 flags 0x1
>pnp 00:0a:   dependent set 6 (functional) io  min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1
>pnp 00:0a:   dependent set 6 (functional) irq 3 5 7 flags 0x1
>pnp 00:0a:   dependent set 7 (functional) io  min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1
>pnp 00:0a:   dependent set 7 (functional) irq 4 5 7 flags 0x1
>pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (disabled)
>pnp 00:0b: parse resource options
>pnp 00:0b:   dependent set 0 (acceptable) io  min 0x3bc max 0x3bc align 1 size 3 flags 0x1
>pnp 00:0b:   dependent set 0 (acceptable) irq 7 flags 0x1
>pnp 00:0b:   dependent set 1 (acceptable) io  min 0x378 max 0x378 align 1 size 8 flags 0x1
>pnp 00:0b:   dependent set 1 (acceptable) irq 7 flags 0x1
>pnp 00:0b:   dependent set 2 (acceptable) io  min 0x278 max 0x278 align 1 size 8 flags 0x1
>pnp 00:0b:   dependent set 2 (acceptable) irq 5 flags 0x1
>pnp 00:0b:   dependent set 3 (acceptable) io  min 0x3bc max 0x3bc align 1 size 3 flags 0x1
>pnp 00:0b:   dependent set 3 (acceptable) irq 5 flags 0x1
>pnp 00:0b:   dependent set 4 (acceptable) io  min 0x378 max 0x378 align 1 size 8 flags 0x1
>pnp 00:0b:   dependent set 4 (acceptable) irq 5 flags 0x1
>pnp 00:0b:   dependent set 5 (acceptable) io  min 0x278 max 0x278 align 1 size 8 flags 0x1
>pnp 00:0b:   dependent set 5 (acceptable) irq 7 flags 0x1
>pnp 00:0b: Plug and Play ACPI device, IDs PNP0400 (disabled)
>pnp 00:0c: parse resource options
>pnp 00:0c:   dependent set 0 (preferred) io  min 0x200 max 0x200 align 1 size 8 flags 0x1
>pnp 00:0c:   dependent set 0 (preferred) irq 5 flags 0x1
>pnp 00:0c:   dependent set 1 (acceptable) io  min 0x208 max 0x208 align 1 size 8 flags 0x1
>pnp 00:0c:   dependent set 1 (acceptable) irq 3 flags 0x1
>pnp 00:0c:   dependent set 2 (functional) io  min 0x200 max 0x200 align 1 size 8 flags 0x1
>pnp 00:0c:   dependent set 2 (functional) irq 3 4 6 7 flags 0x1
>pnp 00:0c:   dependent set 3 (functional) io  min 0x208 max 0x208 align 1 size 8 flags 0x1
>pnp 00:0c:   dependent set 3 (functional) irq 4 5 6 7 flags 0x1
>pnp 00:0c: Plug and Play ACPI device, IDs WACf004 (disabled)
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>DMAR:parse DMAR table failure.
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>pnp: the driver 'system' has been registered
>system 00:00: iomem range 0x0-0x9ffff could not be reserved
>system 00:00: iomem range 0xc0000-0xc3fff has been reserved
>system 00:00: iomem range 0xc4000-0xc7fff has been reserved
>system 00:00: iomem range 0xc8000-0xcbfff has been reserved
>system 00:00: iomem range 0xcc000-0xcffff has been reserved
>system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
>system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
>system 00:00: iomem range 0xe8000-0xebfff could not be reserved
>system 00:00: iomem range 0xec000-0xeffff could not be reserved
>system 00:00: iomem range 0xf0000-0xfffff could not be reserved
>system 00:00: iomem range 0x100000-0x7dffffff could not be reserved
>system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved
>system 00:00: driver attached
>system 00:02: ioport range 0x164e-0x164f has been reserved
>system 00:02: ioport range 0x1000-0x107f has been reserved
>system 00:02: ioport range 0x1180-0x11bf has been reserved
>system 00:02: ioport range 0x800-0x80f has been reserved
>system 00:02: ioport range 0x15e0-0x15ef has been reserved
>system 00:02: ioport range 0x1600-0x165f could not be reserved
>system 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved
>system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
>system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
>system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
>system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved
>system 00:02: iomem range 0xfed45000-0xfed4bfff could not be reserved
>system 00:02: iomem range 0xfed40000-0xfed44fff could not be reserved
>system 00:02: driver attached
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:1c.0:   IO window: 0x2000-0x2fff
>pci 0000:00:1c.0:   MEM window: 0xf4000000-0xf5ffffff
>pci 0000:00:1c.0:   PREFETCH window: 0x000000f8500000-0x000000f85fffff
>pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
>pci 0000:00:1c.1:   IO window: 0x3000-0x3fff
>pci 0000:00:1c.1:   MEM window: 0xf6000000-0xf7ffffff
>pci 0000:00:1c.1:   PREFETCH window: 0x000000f8600000-0x000000f86fffff
>pci 0000:05:00.0: CardBus bridge, secondary bus 0000:06
>pci 0000:05:00.0:   IO window: 0x004000-0x0040ff
>pci 0000:05:00.0:   IO window: 0x004400-0x0044ff
>pci 0000:05:00.0:   PREFETCH window: 0xd8000000-0xdbffffff
>pci 0000:05:00.0:   MEM window: 0x80000000-0x83ffffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
>pci 0000:00:1e.0:   IO window: 0x4000-0x7fff
>pci 0000:00:1e.0:   MEM window: 0xd4000000-0xd7efffff
>pci 0000:00:1e.0:   PREFETCH window: 0x000000d8000000-0x000000dbffffff
>pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1e.0: enabling device (0005 -> 0007)
>pci 0000:00:1e.0: setting latency timer to 64
>pci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:05:00.0: setting latency timer to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Simple Boot Flag at 0x35 set to 0x1
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
>SGI XFS Quota Management subsystem
>msgmni has been set to 3934
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:02.0: Boot video device
>pcieport-driver 0000:00:1c.0: setting latency timer to 64
>pcieport-driver 0000:00:1c.0: found MSI capability
>pci_express 0000:00:1c.0:pcie00: allocate port service
>pci_express 0000:00:1c.0:pcie02: allocate port service
>pci_express 0000:00:1c.0:pcie03: allocate port service
>pcieport-driver 0000:00:1c.1: setting latency timer to 64
>pcieport-driver 0000:00:1c.1: found MSI capability
>pci_express 0000:00:1c.1:pcie00: allocate port service
>pci_express 0000:00:1c.1:pcie02: allocate port service
>pci_express 0000:00:1c.1:pcie03: allocate port service
>ALI M7101 PMU not found.
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
>ACPI: Lid Switch [LID]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
>ACPI: Sleep Button (CM) [SLPB]
>acpi device:03: registered as cooling_device0
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input3
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>acpi device:08: registered as cooling_device1
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/device:07/input/input4
>ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
>ACPI: SSDT 7D6E1D72, 0282 (r1  PmRef  Cpu0Ist      100 INTL 20050513)
>ACPI: SSDT 7D6E2079, 061E (r1  PmRef  Cpu0Cst      100 INTL 20050513)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI0007:00: registered as cooling_device2
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 7D6E1CAA, 00C8 (r1  PmRef  Cpu1Ist      100 INTL 20050513)
>ACPI: SSDT 7D6E1FF4, 0085 (r1  PmRef  Cpu1Cst      100 INTL 20050513)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI0007:01: registered as cooling_device3
>ACPI: Processor [CPU1] (supports 8 throttling states)
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THM0] (67 C)
>thermal LNXTHERM:02: registered as thermal_zone1
>ACPI: Thermal Zone [THM1] (66 C)
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel 965GM Chipset
>agpgart-intel 0000:00:00.0: detected 7676K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
>Serial: 8250/16550 driver4 ports, IRQ sharing disabled
>pnp: the driver 'serial' has been registered
>serial 00:0a: pnp_assign_resources, try dependent set 0
>serial 00:0a:   add io  0x3f8-0x3ff flags 0x40000001
>serial 00:0a:   add irq 4 flags 0x40000001
>serial 00:0a: pnp_assign_resources succeeded: current resources:
>serial 00:0a:   io  0x3f8-0x3ff flags 0x40000101
>serial 00:0a:   irq 4 flags 0x40000401
>serial 00:0a: pnp_start_dev: current resources:
>serial 00:0a:   io  0x3f8-0x3ff flags 0x40000101
>serial 00:0a:   irq 4 flags 0x40000401
>serial 00:0a: set resources
>serial 00:0a: encode 2 resources
>serial 00:0a:   encode io 0x3f8-0x3ff decode 0x1
>serial 00:0a:   encode irq 4 edge high exclusive (2-byte descriptor)
>serial 00:0a: activated
>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial 00:0a: driver attached
>serial 00:0c: pnp_assign_resources, try dependent set 0
>serial 00:0c:   add io  0x200-0x207 flags 0x40000001
>serial 00:0c:   add irq 5 flags 0x40000001
>serial 00:0c: pnp_assign_resources succeeded: current resources:
>serial 00:0c:   io  0x200-0x207 flags 0x40000101
>serial 00:0c:   irq 5 flags 0x40000401
>serial 00:0c: pnp_start_dev: current resources:
>serial 00:0c:   io  0x200-0x207 flags 0x40000101
>serial 00:0c:   irq 5 flags 0x40000401
>serial 00:0c: set resources
>serial 00:0c: encode 2 resources
>serial 00:0c:   encode io 0x200-0x207 decode 0x1
>serial 00:0c:   encode irq 5 edge high exclusive (2-byte descriptor)
>serial 00:0c: activated
>00:0c: ttyS1 at I/O 0x200 (irq = 5) is a NS16550A
>serial 00:0c: driver attached
>loop: module loaded
>nbd: registered device at major 43
>thinkpad_acpi: ThinkPad ACPI Extras v0.21
>thinkpad_acpi: http://ibm-acpi.sf.net/
>thinkpad_acpi: ThinkPad BIOS 7SET24WW (1.10 ), EC 7RHT16WW-1.02
>thinkpad_acpi: Lenovo ThinkPad X61 Tablet, model 776295G
>thinkpad_acpi: radio switch found; radios are enabled
>thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
>thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
>thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
>Registered led device: tpacpi::thinklight
>Registered led device: tpacpi::power
>Registered led device: tpacpi:orange:batt
>Registered led device: tpacpi:green:batt
>Registered led device: tpacpi::dock_active
>Registered led device: tpacpi::bay_active
>Registered led device: tpacpi::dock_batt
>Registered led device: tpacpi::unknown_led
>Registered led device: tpacpi::standby
>thinkpad_acpi: Lenovo BIOS switched to ACPI backlight control mode
>thinkpad_acpi: standard ACPI backlight interface available, not loading native one...
>input: ThinkPad Extra Buttons as /devices/virtual/input/input5
>Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2
>e1000e: Copyright (c) 1999-2008 Intel Corporation.
>e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>e1000e 0000:00:19.0: setting latency timer to 64
>0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:16:d3:ce:57:d9
>0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
>0000:00:19.0: eth0: MAC: 4, PHY: 6, PBA No: ffffff-0ff
>Driver 'sd' needs updating - please use bus_type methods
>Driver 'sr' needs updating - please use bus_type methods
>SCSI Media Changer driver v0.25 
>Driver 'ch' needs updating - please use bus_type methods
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xf8426000 port 0xf8426100 irq 317
>ata2: DUMMY
>ata3: DUMMY
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>ata1.00: ATA-7: HITACHI HTS541680J9SA00, SB2IC7UP, max UDMA/100
>ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>ata1.00: configured for UDMA/100
>ata1.00: configured for UDMA/100
>ata1: EH complete
>scsi 0:0:0:0: Direct-Access     ATA      HITACHI HTS54168 SB2I PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4
>sd 0:0:0:0: [sda] Attached SCSI disk
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>USB Universal Host Controller Interface driver v3.0
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb 1-1: new full speed USB device using uhci_hcd and address 2
>uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-1: configuration #1 chosen from 1 choice
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 1-2: new full speed USB device using uhci_hcd and address 3
>Initializing USB Mass Storage driver...
>usb 1-2: configuration #1 chosen from 1 choice
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>pnp: the driver 'i8042 kbd' has been registered
>i8042 kbd 00:08: driver attached
>pnp: the driver 'i8042 aux' has been registered
>i8042 aux 00:09: driver attached
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6
>usb 2-2: new full speed USB device using uhci_hcd and address 2
>i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>usb 2-2: configuration #1 chosen from 1 choice
>hub 2-2:1.0: USB hub found
>hub 2-2:1.0: 4 ports detected
>usb 2-2.3: new full speed USB device using uhci_hcd and address 3
>IBM TrackPoint firmware: 0x0e, buttons: 3/3
>input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input7
>i2c-parport-light: adapter type unspecified
>usb 2-2.3: configuration #1 chosen from 1 choice
>hub 2-2.3:1.0: USB hub found
>hub 2-2.3:1.0: 3 ports detected
>md: linear personality registered for level -1
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usb 2-2.4: new full speed USB device using uhci_hcd and address 4
>usb 2-2.4: configuration #1 chosen from 1 choice
>usb 2-2.3.2: new full speed USB device using uhci_hcd and address 5
>usb 2-2.3.2: configuration #1 chosen from 1 choice
>usb 2-2.3.3: new full speed USB device using uhci_hcd and address 6
>usb 2-2.3.3: configuration #1 chosen from 1 choice
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2.4/2-2.4:1.0/input/input8
>input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.1-2.4
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2.4/2-2.4:1.1/input/input9
>input,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.1-2.4
>input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2.3/2-2.3.2/2-2.3.2:1.0/input/input10
>input,hidraw2: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1a.1-2.3.2
>input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2.3/2-2.3.3/2-2.3.3:1.0/input/input11
>input,hidraw3: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1a.1-2.3.3
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>Advanced Linux Sound Architecture Driver Version 1.0.17.
>HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>hda_intel: probe_mask set to 0x1 for device 17aa:20ac
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>ALSA device list:
>  #0: HDA Intel at 0xf8220000 irq 17
>oprofile: using NMI interrupt.
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>NET: Registered protocol family 15
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>PM: Resume from partition /dev/sda4
>PM: Checking hibernation image.
>PM: Resume from disk failed.
>md: Autodetecting RAID arrays.
>md: Scanned 0 and added 0 devices.
>md: autorun ...
>md: ... autorun DONE.
>UDF-fs: No VRS found
>XFS mounting filesystem sda2
>Ending clean XFS mount for filesystem: sda2
>VFS: Mounted root (xfs filesystem) readonly.
>Freeing unused kernel memory: 336k freed
>ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1a.7: irq 22, io mem 0xf8426c00
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 4 ports detected
>ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 6
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf8427000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 4 ports detected
>usb 1-1: USB disconnect, address 2
>usb 1-2: USB disconnect, address 3
>usb 2-2: USB disconnect, address 2
>usb 2-2.3: USB disconnect, address 3
>usb 2-2.3.2: USB disconnect, address 5
>usb 2-2.3.3: USB disconnect, address 6
>usb 2-2.4: USB disconnect, address 4
>usb 5-4: new high speed USB device using ehci_hcd and address 4
>usb 5-4: configuration #1 chosen from 1 choice
>hub 5-4:1.0: USB hub found
>hub 5-4:1.0: 4 ports detected
>usb 1-1: new full speed USB device using uhci_hcd and address 4
>usb 1-1: configuration #1 chosen from 1 choice
>usb 1-2: new full speed USB device using uhci_hcd and address 5
>XFS mounting filesystem sda3
>usb 1-2: configuration #1 chosen from 1 choice
>usb 5-4.3: new full speed USB device using ehci_hcd and address 5
>Ending clean XFS mount for filesystem: sda3
>usb 5-4.3: configuration #1 chosen from 1 choice
>hub 5-4.3:1.0: USB hub found
>hub 5-4.3:1.0: 3 ports detected
>usb 5-4.4: new full speed USB device using ehci_hcd and address 6
>usb 5-4.4: configuration #1 chosen from 1 choice
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.7/usb5/5-4/5-4.4/5-4.4:1.0/input/input12
>input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.7-4.4
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.7/usb5/5-4/5-4.4/5-4.4:1.1/input/input13
>input,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.7-4.4
>usb 5-4.3.2: new full speed USB device using ehci_hcd and address 7
>usb 5-4.3.2: configuration #1 chosen from 1 choice
>input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:1a.7/usb5/5-4/5-4.3/5-4.3.2/5-4.3.2:1.0/input/input14
>input,hidraw2: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1a.7-4.3.2
>usb 5-4.3.3: new full speed USB device using ehci_hcd and address 8
>usb 5-4.3.3: configuration #1 chosen from 1 choice
>input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:1a.7/usb5/5-4/5-4.3/5-4.3.3/5-4.3.3:1.0/input/input15
>input,hidraw3: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1a.7-4.3.3
>0000:00:19.0: eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
>Adding 4882396k swap on /dev/sda4.  Priority:1 extents:1 across:4882396k
>[drm] Initialized drm 1.1.0 20060810
>pci 0000:00:02.0: power state changed by ACPI to D0
>pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:02.0: setting latency timer to 64
>[drm] Initialized i915 1.6.0 20080730 on minor 0
>[drm] Set up GEM GTT of 166400kb
>[drm] Creating ringbuffer
>[drm:i915_gem_init_ringbuffer] *ERROR* Failed to map ringbuffer 128kb at 0x        e0000000+0x0077f000 = 0x        e077f000.

Actions: View

Attachments on bug 17085: 18224 | 18225 | 18226 | 18304 | 18396 | 18397

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.