Attachment 21582 Details for Bug 18879 – dmesg after oops

dmesg after oops

dmesg (text/plain), 34.53 KB, created by liuhaien on 2008-12-30 23:09:17 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: liuhaien

Created: 2008-12-30 23:09:17 UTC

Size: 34.53 KB

patch

obsolete

>BIOS EBDA/lowmem at: 0009fc00/0009fc00
>Linux version 2.6.28release (root@x-q965) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #3 SMP Wed Dec 31 09:21:08 CST 2008
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  NSC Geode by NSC
>  Cyrix CyrixInstead
>  Centaur CentaurHauls
>  Transmeta GenuineTMx86
>  Transmeta TransmetaCPU
>  UMC UMC UMC UMC
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003f5ffc00 (usable)
> BIOS-e820: 000000003f5ffc00 - 000000003f601c00 (ACPI NVS)
> BIOS-e820: 000000003f603c00 - 000000003f653c00 (reserved)
> BIOS-e820: 000000003f653c00 - 000000003f655c00 (ACPI data)
> BIOS-e820: 000000003f655c00 - 0000000040000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>DMI 2.3 present.
>last_pfn = 0x3f5ff max_arch_pfn = 0x100000
>kernel direct mapping tables up to 373fe000 @ 7000-d000
>RAMDISK: 37c88000 - 37fef673
>Allocated new RAMDISK: 008e7000 - 00c4e673
>Move RAMDISK from 0000000037c88000 - 0000000037fef672 to 008e7000 - 00c4e672
>ACPI: RSDP 000FEBF0, 0024 (r2 DELL  )
>ACPI: XSDT 000FCE8E, 006C (r1 DELL    B8K           14 ASL        61)
>ACPI: FACP 000FCFB6, 00F4 (r3 DELL    B8K           14 ASL        61)
>ACPI: DSDT FFF69AB8, 4337 (r1   DELL    dt_ex     1000 INTL 20050624)
>ACPI: FACS 3F5FFC00, 0040
>ACPI: SSDT FFF6DF0E, 00AA (r1   DELL    st_ex     1000 INTL 20050624)
>ACPI: APIC 000FD0AA, 0092 (r1 DELL    B8K           14 ASL        61)
>ACPI: BOOT 000FD13C, 0028 (r1 DELL    B8K           14 ASL        61)
>ACPI: ASF! 000FD164, 0092 (r32 DELL    B8K           14 ASL        61)
>ACPI: MCFG 000FD1F6, 003E (r1 DELL    B8K           14 ASL        61)
>ACPI: HPET 000FD234, 0038 (r1 DELL    B8K           14 ASL        61)
>ACPI: TCPA 000FD490, 0032 (r1 DELL    B8K           14 ASL        61)
>ACPI: SLIC 000FD26C, 0176 (r1 DELL    B8K           14 ASL        61)
>ACPI: Local APIC address 0xfee00000
>130MB HIGHMEM available.
>883MB LOWMEM available.
>  mapped low ram: 0 - 373fe000
>  low ram: 00000000 - 373fe000
>  bootmap 00009000 - 0000fe80
>(9 early reservations) ==> bootmem [0000000000 - 00373fe000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>  #3 [0000400000 - 00008e2840]    TEXT DATA BSS ==> [0000400000 - 00008e2840]
>  #4 [00008e3000 - 00008e7000]    INIT_PG_TABLE ==> [00008e3000 - 00008e7000]
>  #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
>  #6 [0000007000 - 0000009000]          PGTABLE ==> [0000007000 - 0000009000]
>  #7 [00008e7000 - 0000c4e673]      NEW RAMDISK ==> [00008e7000 - 0000c4e673]
>  #8 [0000009000 - 0000010000]          BOOTMAP ==> [0000009000 - 0000010000]
>found SMP MP-table at [c00fe710] 000fe710
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  Normal   0x00001000 -> 0x000373fe
>  HighMem  0x000373fe -> 0x0003f5ff
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0003f5ff
>On node 0 totalpages: 259486
>free_area_init_node: node 0, pgdat c0792e00, node_mem_map c1000000
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3967 pages, LIFO batch:0
>  Normal zone: 1736 pages used for memmap
>  Normal zone: 220470 pages, LIFO batch:31
>  HighMem zone: 261 pages used for memmap
>  HighMem zone: 33020 pages, LIFO batch:7
>  Movable zone: 0 pages used for memmap
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
>ACPI: Skipping IOAPIC probe due to 'noapic' option.
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI for processor (LAPIC) configuration information
>Intel MultiProcessor Specification v1.4
>    Virtual Wire compatibility mode.
>MPTABLE: OEM ID: DELL    
>MPTABLE: Product ID: Opti 745    
>MPTABLE: APIC at: 0xFEE00000
>I/O APIC #8 Version 32 at 0xFEC00000.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Processors: 2
>SMP: Allowing 8 CPUs, 6 hotplug CPUs
>PM: Registered nosave memory: 000000000009f000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
>PERCPU: Allocating 40960 bytes of per cpu data
>NR_CPUS: 32, nr_cpu_ids: 8, nr_node_ids 1
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257457
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb  nosmp                          
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0844000 soft=c0824000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Fast TSC calibration using PIT
>Detected 2791.131 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1019780k/1038332k available (2268k kernel code, 17868k reserved, 1627k data, 308k init, 133124k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc58000 - 0xfffff000   (3740 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
>      .init : 0xc07d4000 - 0xc0821000   ( 308 kB)
>      .data : 0xc0637218 - 0xc07cdebc   (1627 kB)
>      .text : 0xc0400000 - 0xc0637218   (2268 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>hpet clockevent registered
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>Calibrating delay loop (skipped), value calculated using timer frequency.. 5582.26 BogoMIPS (lpj=2791131)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Mount-cache hash table entries: 512
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU0: Thermal monitoring enabled
>using mwait in idle threads.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20080926
>ACPI: setting ELCR to 0200 (from 0e28)
>SMP mode deactivated.
>SMP disabled
>Brought up 1 CPUs
>Total of 1 processors activated (5582.26 BogoMIPS).
>CPU0 attaching NULL sched-domain.
>net_namespace: 776 bytes
>Dell OptiPlex 745 series board detected. Selecting BIOS-method for reboots.
>NET: Registered protocol family 16
>ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in E820
>PCI: Using MMCONFIG for extended config space
>PCI: Using configuration type 1 for base access
>ACPI: EC: Look up EC in DSDT
>ACPI: BIOS _OSI(Linux) query ignored
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: ACPI Dock Station Driver: 1 docks/bays found
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:01.0: PME# disabled
>pci 0000:00:02.0: reg 10 32bit mmio: [0xdfe00000-0xdfefffff]
>pci 0000:00:02.0: reg 18 64bit mmio: [0xc0000000-0xcfffffff]
>pci 0000:00:02.0: reg 20 io port: [0xecb8-0xecbf]
>pci 0000:00:02.1: reg 10 32bit mmio: [0xdff00000-0xdfffffff]
>pci 0000:00:1a.0: reg 20 io port: [0xff20-0xff3f]
>pci 0000:00:1a.1: reg 20 io port: [0xff00-0xff1f]
>pci 0000:00:1a.7: reg 10 32bit mmio: [0xdfdfbc00-0xdfdfbfff]
>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.7: PME# disabled
>pci 0000:00:1b.0: reg 10 64bit mmio: [0xdfdfc000-0xdfdfffff]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.4: PME# disabled
>pci 0000:00:1d.0: reg 20 io port: [0xff80-0xff9f]
>pci 0000:00:1d.1: reg 20 io port: [0xff60-0xff7f]
>pci 0000:00:1d.2: reg 20 io port: [0xff40-0xff5f]
>pci 0000:00:1d.7: reg 10 32bit mmio: [0xff980800-0xff980bff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
>pci 0000:00:1f.2: reg 10 io port: [0x1f0-0x1f7]
>pci 0000:00:1f.2: reg 14 io port: [0x3f4-0x3f7]
>pci 0000:00:1f.2: reg 18 io port: [0x170-0x177]
>pci 0000:00:1f.2: reg 1c io port: [0x374-0x377]
>pci 0000:00:1f.2: reg 20 io port: [0xfec0-0xfecf]
>pci 0000:00:1f.2: reg 24 io port: [0xecc0-0xeccf]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 10 32bit mmio: [0xdfdfbb00-0xdfdfbbff]
>pci 0000:00:1f.3: reg 20 io port: [0xece0-0xecff]
>pci 0000:00:1f.5: reg 10 io port: [0xfe40-0xfe47]
>pci 0000:00:1f.5: reg 14 io port: [0xfe50-0xfe53]
>pci 0000:00:1f.5: reg 18 io port: [0xfe60-0xfe67]
>pci 0000:00:1f.5: reg 1c io port: [0xfe70-0xfe73]
>pci 0000:00:1f.5: reg 20 io port: [0xfed0-0xfedf]
>pci 0000:00:1f.5: reg 24 io port: [0xecd0-0xecdf]
>pci 0000:00:1f.5: PME# supported from D3hot
>pci 0000:00:1f.5: PME# disabled
>pci 0000:00:01.0: bridge 32bit mmio: [0xdfc00000-0xdfcfffff]
>pci 0000:00:1c.0: bridge 32bit mmio: [0xdfb00000-0xdfbfffff]
>pci 0000:03:00.0: reg 10 64bit mmio: [0xdfaf0000-0xdfafffff]
>pci 0000:03:00.0: PME# supported from D3hot D3cold
>pci 0000:03:00.0: PME# disabled
>pci 0000:00:1c.4: bridge 32bit mmio: [0xdfa00000-0xdfafffff]
>pci 0000:00:1e.0: transparent bridge
>bus 00 -> node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] - 00, should be 89 [20080926]
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>Switched to high resolution mode on CPU 0
>pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
>pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: ioport range 0xc00-0xc7f has been reserved
>system 00:08: iomem range 0x0-0x9ffff could not be reserved
>system 00:08: iomem range 0x100000-0xffffff could not be reserved
>system 00:08: iomem range 0x1000000-0x3f5ffbff could not be reserved
>system 00:08: iomem range 0xf0000-0xfffff could not be reserved
>system 00:08: iomem range 0xc0000-0xcffff could not be reserved
>system 00:08: iomem range 0xfec00000-0xfecfffff has been reserved
>system 00:08: iomem range 0xfee00000-0xfeefffff has been reserved
>system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
>system 00:08: iomem range 0xffc00000-0xffffffff has been reserved
>system 00:09: ioport range 0x100-0x1fe could not be reserved
>system 00:09: ioport range 0x200-0x277 has been reserved
>system 00:09: ioport range 0x280-0x2e7 has been reserved
>system 00:09: ioport range 0x2f0-0x2f7 has been reserved
>system 00:09: ioport range 0x300-0x377 could not be reserved
>system 00:09: ioport range 0x380-0x3bb has been reserved
>system 00:09: ioport range 0x3c0-0x3e7 could not be reserved
>system 00:09: ioport range 0x3f6-0x3f7 could not be reserved
>system 00:09: ioport range 0x400-0x4cf has been reserved
>system 00:09: ioport range 0x4d2-0x57f has been reserved
>system 00:09: ioport range 0x580-0x677 has been reserved
>system 00:09: ioport range 0x680-0x777 has been reserved
>system 00:09: ioport range 0x780-0x7bb has been reserved
>system 00:09: ioport range 0x7c0-0x7ff has been reserved
>system 00:09: ioport range 0x8e0-0x8ff has been reserved
>system 00:09: ioport range 0x900-0x9fe has been reserved
>system 00:09: ioport range 0xa00-0xafe has been reserved
>system 00:09: ioport range 0xb00-0xbfe has been reserved
>system 00:09: ioport range 0xc80-0xcaf has been reserved
>system 00:09: ioport range 0xcc0-0xcf7 has been reserved
>system 00:09: ioport range 0xd00-0xdfe has been reserved
>system 00:09: ioport range 0xe00-0xefe has been reserved
>system 00:09: ioport range 0xf00-0xffe has been reserved
>system 00:09: ioport range 0x2000-0x20fe has been reserved
>system 00:09: ioport range 0x2100-0x21fe has been reserved
>system 00:09: ioport range 0x2200-0x22fe has been reserved
>system 00:09: ioport range 0x2300-0x23fe has been reserved
>system 00:09: ioport range 0x2400-0x24fe has been reserved
>system 00:09: ioport range 0x2500-0x25fe has been reserved
>system 00:09: ioport range 0x2600-0x26fe has been reserved
>system 00:09: ioport range 0x2700-0x27fe has been reserved
>system 00:09: ioport range 0x2800-0x28fe has been reserved
>system 00:09: ioport range 0x2900-0x29fe has been reserved
>system 00:09: ioport range 0x2a00-0x2afe has been reserved
>system 00:09: ioport range 0x2b00-0x2bfe has been reserved
>system 00:09: ioport range 0x2c00-0x2cfe has been reserved
>system 00:09: ioport range 0x2d00-0x2dfe has been reserved
>system 00:09: ioport range 0x2e00-0x2efe has been reserved
>system 00:09: ioport range 0x2f00-0x2ffe has been reserved
>system 00:09: ioport range 0x5000-0x50fe has been reserved
>system 00:09: ioport range 0x5100-0x51fe has been reserved
>system 00:09: ioport range 0x5200-0x52fe has been reserved
>system 00:09: ioport range 0x5300-0x53fe has been reserved
>system 00:09: ioport range 0x5400-0x54fe has been reserved
>system 00:09: ioport range 0x5500-0x55fe has been reserved
>system 00:09: ioport range 0x5600-0x56fe has been reserved
>system 00:09: ioport range 0x5700-0x57fe has been reserved
>system 00:09: ioport range 0x5800-0x58fe has been reserved
>system 00:09: ioport range 0x5900-0x59fe has been reserved
>system 00:09: ioport range 0x5a00-0x5afe has been reserved
>system 00:09: ioport range 0x5b00-0x5bfe has been reserved
>system 00:09: ioport range 0x5c00-0x5cfe has been reserved
>system 00:09: ioport range 0x5d00-0x5dfe has been reserved
>system 00:09: ioport range 0x5e00-0x5efe has been reserved
>system 00:09: ioport range 0x5f00-0x5ffe has been reserved
>system 00:09: ioport range 0x6000-0x60fe has been reserved
>system 00:09: ioport range 0x6100-0x61fe has been reserved
>system 00:09: ioport range 0x6200-0x62fe has been reserved
>system 00:09: ioport range 0x6300-0x63fe has been reserved
>system 00:09: ioport range 0x6400-0x64fe has been reserved
>system 00:09: ioport range 0x6500-0x65fe has been reserved
>system 00:09: ioport range 0x6600-0x66fe has been reserved
>system 00:09: ioport range 0x6700-0x67fe has been reserved
>system 00:09: ioport range 0x6800-0x68fe has been reserved
>system 00:09: ioport range 0x6900-0x69fe has been reserved
>system 00:09: ioport range 0x6a00-0x6afe has been reserved
>system 00:09: ioport range 0x6b00-0x6bfe has been reserved
>system 00:09: ioport range 0x6c00-0x6cfe has been reserved
>system 00:09: ioport range 0x6d00-0x6dfe has been reserved
>system 00:09: ioport range 0x6e00-0x6efe has been reserved
>system 00:09: ioport range 0x6f00-0x6ffe has been reserved
>system 00:09: ioport range 0xa000-0xa0fe has been reserved
>system 00:09: ioport range 0xa100-0xa1fe has been reserved
>system 00:09: ioport range 0xa200-0xa2fe has been reserved
>system 00:09: ioport range 0xa300-0xa3fe has been reserved
>system 00:09: ioport range 0xa400-0xa4fe has been reserved
>system 00:09: ioport range 0xa500-0xa5fe has been reserved
>system 00:09: ioport range 0xa600-0xa6fe has been reserved
>system 00:09: ioport range 0xa700-0xa7fe has been reserved
>system 00:09: ioport range 0xa800-0xa8fe has been reserved
>system 00:09: ioport range 0xa900-0xa9fe has been reserved
>system 00:09: ioport range 0xaa00-0xaafe has been reserved
>system 00:09: ioport range 0xab00-0xabfe has been reserved
>system 00:09: ioport range 0xac00-0xacfe has been reserved
>system 00:09: ioport range 0xad00-0xadfe has been reserved
>system 00:09: ioport range 0xae00-0xaefe has been reserved
>system 00:09: ioport range 0xaf00-0xaffe has been reserved
>system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:09: iomem range 0xfeda0000-0xfedacfff has been reserved
>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:01.0:   IO window: disabled
>pci 0000:00:01.0:   MEM window: 0xdfc00000-0xdfcfffff
>pci 0000:00:01.0:   PREFETCH window: disabled
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:1c.0:   IO window: disabled
>pci 0000:00:1c.0:   MEM window: 0xdfb00000-0xdfbfffff
>pci 0000:00:1c.0:   PREFETCH window: disabled
>pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
>pci 0000:00:1c.4:   IO window: disabled
>pci 0000:00:1c.4:   MEM window: 0xdfa00000-0xdfafffff
>pci 0000:00:1c.4:   PREFETCH window: disabled
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
>pci 0000:00:1e.0:   IO window: disabled
>pci 0000:00:1e.0:   MEM window: disabled
>pci 0000:00:1e.0:   PREFETCH window: disabled
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>pci 0000:00:01.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:1c.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.4: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
>pci 0000:00:1c.4: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>bus: 00 index 0 io port: [0x00-0xffff]
>bus: 00 index 1 mmio: [0x000000-0xffffffff]
>bus: 01 index 0 mmio: [0x0-0x0]
>bus: 01 index 1 mmio: [0xdfc00000-0xdfcfffff]
>bus: 01 index 2 mmio: [0x0-0x0]
>bus: 01 index 3 mmio: [0x0-0x0]
>bus: 02 index 0 mmio: [0x0-0x0]
>bus: 02 index 1 mmio: [0xdfb00000-0xdfbfffff]
>bus: 02 index 2 mmio: [0x0-0x0]
>bus: 02 index 3 mmio: [0x0-0x0]
>bus: 03 index 0 mmio: [0x0-0x0]
>bus: 03 index 1 mmio: [0xdfa00000-0xdfafffff]
>bus: 03 index 2 mmio: [0x0-0x0]
>bus: 03 index 3 mmio: [0x0-0x0]
>bus: 04 index 0 mmio: [0x0-0x0]
>bus: 04 index 1 mmio: [0x0-0x0]
>bus: 04 index 2 mmio: [0x0-0x0]
>bus: 04 index 3 io port: [0x00-0xffff]
>bus: 04 index 4 mmio: [0x000000-0xffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs... it is
>Freeing initrd memory: 3485k freed
>Simple Boot Flag at 0x7a set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1230706144.089:1): initialized
>highmem bounce pool size: 64 pages
>HugeTLB registered 4 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1739
>SELinux:  Registering netfilter hooks
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:02.0: Boot video device
>pcieport-driver 0000:00:01.0: setting latency timer to 64
>pcieport-driver 0000:00:01.0: found MSI capability
>pcieport-driver 0000:00:01.0: irq 1279 for MSI/MSI-X
>pci_express 0000:00:01.0:pcie00: allocate port service
>pci_express 0000:00:01.0:pcie03: allocate port service
>pcieport-driver 0000:00:1c.0: setting latency timer to 64
>pcieport-driver 0000:00:1c.0: found MSI capability
>pcieport-driver 0000:00:1c.0: irq 1278 for MSI/MSI-X
>pci_express 0000:00:1c.0:pcie00: allocate port service
>pci_express 0000:00:1c.0:pcie02: allocate port service
>pci_express 0000:00:1c.0:pcie03: allocate port service
>pcieport-driver 0000:00:1c.4: setting latency timer to 64
>pcieport-driver 0000:00:1c.4: found MSI capability
>pcieport-driver 0000:00:1c.4: irq 1277 for MSI/MSI-X
>pci_express 0000:00:1c.4:pcie00: allocate port service
>pci_express 0000:00:1c.4:pcie02: allocate port service
>pci_express 0000:00:1c.4:pcie03: allocate port service
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>processor ACPI_CPU:00: registered as cooling_device0
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel 965Q Chipset
>agpgart-intel 0000:00:00.0: detected 7676K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
>Serial: 8250/16550 driver4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>brd: module loaded
>input: Macintosh mouse button emulation as /class/input/input0
>ata_piix 0000:00:1f.2: version 2.12
>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9
>PCI: setting IRQ 9 as level-triggered
>ata_piix 0000:00:1f.2: PCI INT C -> Link[LNKE] -> GSI 9 (level, low) -> IRQ 9
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ata_piix 0000:00:1f.2: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfec0 irq 14
>ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfec8 irq 15
>ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.01: SATA link down (SStatus 4 SControl 300)
>ata1.00: ATA-7: ST3808110AS, 3.ADH, max UDMA/133
>ata1.00: 156250000 sectors, multi 8: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/133
>ata2.00: SATA link down (SStatus 0 SControl 300)
>ata2.01: SATA link down (SStatus 4 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      ST3808110AS      3.AD PQ: 0 ANSI: 5
>ata_piix 0000:00:1f.5: PCI INT C -> Link[LNKE] -> GSI 9 (level, low) -> IRQ 9
>ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
>ata_piix 0000:00:1f.5: setting latency timer to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0xfe40 ctl 0xfe50 bmdma 0xfed0 irq 9
>ata4: SATA max UDMA/133 cmd 0xfe60 ctl 0xfe70 bmdma 0xfed8 irq 9
>ata3: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>Freeing unused kernel memory: 308k freed
>Write protecting the kernel text: 2272k
>Write protecting the kernel read-only data: 1200k
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 9
>ehci_hcd 0000:00:1a.7: PCI INT C -> Link[LNKG] -> GSI 9 (level, low) -> IRQ 9
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>ehci_hcd 0000:00:1a.7: cache line size of 128 is not supported
>ehci_hcd 0000:00:1a.7: irq 9, io mem 0xdfdfbc00
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ehci_hcd 0000:00:1d.7: PCI INT A -> Link[LNKH] -> GSI 5 (level, low) -> IRQ 5
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
>ehci_hcd 0000:00:1d.7: irq 5, io mem 0xff980800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1a.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 11, io base 0x0000ff20
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>uhci_hcd 0000:00:1a.1: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 10, io base 0x0000ff00
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKH] -> GSI 5 (level, low) -> IRQ 5
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 5, io base 0x0000ff80
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 10, io base 0x0000ff60
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 3
>PCI: setting IRQ 3 as level-triggered
>uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 3 (level, low) -> IRQ 3
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 3, io base 0x0000ff40
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>Driver 'sd' needs updating - please use bus_type methods
>sd 0:0:0:0: [sda] 156250000 512-byte hardware sectors: (80.0 GB/74.5 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 156250000 512-byte hardware sectors: (80.0 GB/74.5 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>usb 7-2: new low speed USB device using uhci_hcd and address 2
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>usb 7-2: configuration #1 chosen from 1 choice
>input: ATEN ATEN  CS-1716/08/04 as /class/input/input1
>generic-usb 0003:0557:2217.0001: input: USB HID v1.10 Keyboard [ATEN ATEN  CS-1716/08/04] on usb-0000:00:1d.2-2/input0
>input: ATEN ATEN  CS-1716/08/04 as /class/input/input2
>generic-usb 0003:0557:2217.0002: input: USB HID v1.10 Mouse [ATEN ATEN  CS-1716/08/04] on usb-0000:00:1d.2-2/input1
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>type=1404 audit(1230706148.539:2): selinux=0 auid=4294967295 ses=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>input: PC Speaker as /class/input/input3
>iTCO_vendor_support: vendor-support=0
>i801_smbus 0000:00:1f.3: PCI INT C -> Link[LNKE] -> GSI 9 (level, low) -> IRQ 9
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [VBTN]
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.04
>iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
>iTCO_wdt: No card detected
>parport_pc 00:06: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>tg3.c:v3.94 (August 14, 2008)
>tg3 0000:03:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
>tg3 0000:03:00.0: setting latency timer to 64
>eth0: Tigon3 [partno(BCM95754) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:18:8b:16:1a:0d
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>HDA Intel 0000:00:1b.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>device-mapper: multipath: version 1.0.5 loaded
>loop: module loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:2031608k
>platform microcode: firmware: requesting intel-ucode/0f-04-07
>Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>Microcode Update Driver: v2.00 removed.
>warning: process `kudzu' used the deprecated sysctl system call with 1.23.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>tg3 0000:03:00.0: irq 1276 for MSI/MSI-X
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>tg3: eth0: Link is up at 1000 Mbps, full duplex.
>tg3: eth0: Flow control is on for TX and on for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use)
>Bluetooth: Core ver 2.13
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.11
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.10
>Bridge firewalling registered
>ip_tables: (C) 2000-2006 Netfilter Core Team
>eth0: no IPv6 routers present
>nf_conntrack version 0.5.0 (16223 buckets, 64892 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
>nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>virbr0: no IPv6 routers present
>[drm] Initialized drm 1.1.0 20060810
>pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
>pci 0000:00:02.0: setting latency timer to 64
>pci 0000:00:02.0: irq 1275 for MSI/MSI-X
>[drm] Initialized i915 1.6.0 20080730 on minor 0
>mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
>BUG: unable to handle kernel NULL pointer dereference at 00000004
>IP: [<c04f3dc9>] __list_add+0x7/0x52
>*pde = 3ec1b067 
>Oops: 0000 [#1] SMP 
>last sysfs file: /sys/class/drm/card0/dev
>Modules linked in: i915 drm ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp rfcomm l2cap bluetooth autofs4 sunrpc ipv6 loop dm_multipath snd_hda_intel snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc tg3 snd_hwdep parport_pc snd libphy iTCO_wdt button serio_raw parport i2c_i801 iTCO_vendor_support pcspkr soundcore dcdbas i2c_core sg dm_snapshot dm_zero dm_mirror dm_region_hash dm_log dm_mod ata_generic sd_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: microcode]
>
>Pid: 2627, comm: X Not tainted (2.6.28release #3) OptiPlex 745                 
>EIP: 0060:[<c04f3dc9>] EFLAGS: 00213046 CPU: 0
>EIP is at __list_add+0x7/0x52
>EAX: f6110ee8 EBX: f6110edc ECX: 00000000 EDX: f6104090
>ESI: f6104090 EDI: f6110ee8 EBP: f6076400 ESP: f6110ebc
> DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
>Process X (pid: 2627, ti=f6110000 task=f60679e0 task.ti=f6110000)
>Stack:
> f6110edc f610408c 00203246 c0435763 f6104000 00000001 fffd0651 f805db34
> 00000000 f60679e0 c041f8a0 00000000 00000000 f805da6c f6403e88 40046445
> f6076400 f7e05648 f606bde0 fffffff4 f607642c f8067854 f615b600 bf8b8344
>Call Trace:
> [<c0435763>] add_wait_queue+0x1f/0x2b
> [<f805db34>] i915_irq_wait+0xc8/0x190 [i915]
> [<c041f8a0>] default_wake_function+0x0/0x8
> [<f805da6c>] i915_irq_wait+0x0/0x190 [i915]
> [<f7e05648>] drm_ioctl+0x1a7/0x22f [drm]
> [<c04831bc>] vfs_ioctl+0x47/0x5d
> [<c048366f>] do_vfs_ioctl+0x3c5/0x40f
> [<c0464c45>] handle_mm_fault+0x560/0x5bb
> [<c040440b>] common_interrupt+0x23/0x28
> [<c04836fa>] sys_ioctl+0x41/0x58
> [<c040386d>] sysenter_do_call+0x12/0x21
> [<c0630000>] generic_processor_info+0x83/0x103
>Code: 63 71 c0 e8 b3 24 f3 ff 83 c4 14 8b 13 8b 43 04 89 42 04 89 10 c7 43 04 00 02 20 00 c7 03 00 01 10 00 5b c3 57 89 c7 56 89 d6 53 <8b> 41 04 89 cb 39 d0 74 17 51 50 52 68 7a 63 71 c0 6a 1a 68 2f 
>EIP: [<c04f3dc9>] __list_add+0x7/0x52 SS:ESP 0068:f6110ebc
>---[ end trace a7c344ab6229d38a ]---
>[drm:drm_release] *ERROR* Device busy: 1 0

Actions: View

Attachments on bug 18879: 21423 | 21424 | 21571 | 21582 | 21601 | 21728 | 21774

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.