Attachment 22360 Details for Bug 19731 – dmesg output taken after a suspend/resume cycle

dmesg output taken after a suspend/resume cycle

dmesg_dri2_after_suspend.output (text/plain), 65.11 KB, created by Khashayar Naderehvandi on 2009-01-29 10:04:23 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Khashayar Naderehvandi

Created: 2009-01-29 10:04:23 UTC

Size: 65.11 KB

patch

obsolete

>[    0.000000] BIOS EBDA/lowmem at: 0009ec00/0009ec00
>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Linux version 2.6.28-5-generic (buildd@crested) (gcc version 4.3.3 20090119 (prerelease) (Ubuntu 4.3.2-2ubuntu14) ) #15-Ubuntu SMP Fri Jan 23 01:16:33 UTC 2009 (Ubuntu 2.6.28-5.15-generic)
>[    0.000000] Command line: root=UUID=a19dea3a-7f24-4c67-a935-fc53b3ef9f6d ro quiet splash 
>[    0.000000] KERNEL supported cpus:
>[    0.000000]   Intel GenuineIntel
>[    0.000000]   AMD AuthenticAMD
>[    0.000000]   Centaur CentaurHauls
>[    0.000000] BIOS-provided physical RAM map:
>[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
>[    0.000000]  BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
>[    0.000000]  BIOS-e820: 00000000000e1000 - 0000000000100000 (reserved)
>[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bdd80000 (usable)
>[    0.000000]  BIOS-e820: 00000000bdd80000 - 00000000bdd8f000 (ACPI data)
>[    0.000000]  BIOS-e820: 00000000bdd8f000 - 00000000bdde0000 (ACPI NVS)
>[    0.000000]  BIOS-e820: 00000000bdde0000 - 00000000bde00000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fed20000 - 00000000fed40000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>[    0.000000]  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>[    0.000000] DMI 2.5 present.
>[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around.
>[    0.000000] last_pfn = 0xbdd80 max_arch_pfn = 0x3ffffffff
>[    0.000000] Scanning 0 areas for low memory corruption
>[    0.000000] modified physical RAM map:
>[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
>[    0.000000]  modified: 0000000000010000 - 000000000009ec00 (usable)
>[    0.000000]  modified: 000000000009ec00 - 00000000000a0000 (reserved)
>[    0.000000]  modified: 00000000000e1000 - 0000000000100000 (reserved)
>[    0.000000]  modified: 0000000000100000 - 00000000bdd80000 (usable)
>[    0.000000]  modified: 00000000bdd80000 - 00000000bdd8f000 (ACPI data)
>[    0.000000]  modified: 00000000bdd8f000 - 00000000bdde0000 (ACPI NVS)
>[    0.000000]  modified: 00000000bdde0000 - 00000000bde00000 (reserved)
>[    0.000000]  modified: 00000000fed20000 - 00000000fed40000 (reserved)
>[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
>[    0.000000]  modified: 00000000ffb00000 - 0000000100000000 (reserved)
>[    0.000000] init_memory_mapping: 0000000000000000-00000000bdd80000
>[    0.000000]  0000000000 - 00bdc00000 page 2M
>[    0.000000]  00bdc00000 - 00bdd80000 page 4k
>[    0.000000] kernel direct mapping tables up to bdd80000 @ 10000-15000
>[    0.000000] last_map_addr: bdd80000 end: bdd80000
>[    0.000000] RAMDISK: 37851000 - 37feff1b
>[    0.000000] ACPI: RSDP 000F9350, 0024 (r2 ACPIAM)
>[    0.000000] ACPI: XSDT BDD80100, 0084 (r1 _ASUS_ Notebook 20081226 MSFT       97)
>[    0.000000] ACPI: FACP BDD80290, 00F4 (r3 122608 FACP0931 20081226 MSFT       97)
>[    0.000000] ACPI: DSDT BDD80680, CB4C (r1  N20V0 N20V0207      207 INTL 20051117)
>[    0.000000] ACPI: FACS BDD8F000, 0040
>[    0.000000] ACPI: APIC BDD80390, 005C (r1 122608 APIC0931 20081226 MSFT       97)
>[    0.000000] ACPI: MCFG BDD80430, 003C (r1 122608 OEMMCFG  20081226 MSFT       97)
>[    0.000000] ACPI: SLIC BDD80470, 0176 (r1 _ASUS_ Notebook 20081226 MSFT       97)
>[    0.000000] ACPI: ECDT BDD80620, 0054 (r1 122608 OEMECDT  20081226 MSFT       97)
>[    0.000000] ACPI: DBGP BDD803F0, 0034 (r1 122608 DBGP0931 20081226 MSFT       97)
>[    0.000000] ACPI: BOOT BDD805F0, 0028 (r1 122608 BOOT0931 20081226 MSFT       97)
>[    0.000000] ACPI: OEMB BDD8F040, 0071 (r1 122608 OEMB0931 20081226 MSFT       97)
>[    0.000000] ACPI: HPET BDD8D1D0, 0038 (r1 122608 OEMHPET  20081226 MSFT       97)
>[    0.000000] ACPI: GSCI BDD8F0C0, 2024 (r1 122608 GMCHSCI  20081226 MSFT       97)
>[    0.000000] ACPI: ATKG BDD912F0, 8024 (r1 022008  OEMATKG 20080220 MSFT       97)
>[    0.000000] ACPI: SSDT BDD99D60, 04F0 (r1  PmRef    CpuPm     3000 INTL 20051117)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] (6 early reservations) ==> bootmem [0000000000 - 00bdd80000]
>[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>[    0.000000]   #2 [0000200000 - 0000b5d3b0]    TEXT DATA BSS ==> [0000200000 - 0000b5d3b0]
>[    0.000000]   #3 [0037851000 - 0037feff1b]          RAMDISK ==> [0037851000 - 0037feff1b]
>[    0.000000]   #4 [000009ec00 - 0000100000]    BIOS reserved ==> [000009ec00 - 0000100000]
>[    0.000000]   #5 [0000010000 - 0000013000]          PGTABLE ==> [0000010000 - 0000013000]
>[    0.000000] found SMP MP-table at [ffff8800000ff780] 000ff780
>[    0.000000]  [ffffe20000000000-ffffe200029fffff] PMD -> [ffff880001200000-ffff880003bfffff] on node 0
>[    0.000000] Zone PFN ranges:
>[    0.000000]   DMA      0x00000010 -> 0x00001000
>[    0.000000]   DMA32    0x00001000 -> 0x00100000
>[    0.000000]   Normal   0x00100000 -> 0x00100000
>[    0.000000] Movable zone start PFN for each node
>[    0.000000] early_node_map[2] active PFN ranges
>[    0.000000]     0: 0x00000010 -> 0x0000009e
>[    0.000000]     0: 0x00000100 -> 0x000bdd80
>[    0.000000] On node 0 totalpages: 777486
>[    0.000000]   DMA zone: 56 pages used for memmap
>[    0.000000]   DMA zone: 2502 pages reserved
>[    0.000000]   DMA zone: 1424 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 10576 pages used for memmap
>[    0.000000]   DMA32 zone: 762928 pages, LIFO batch:31
>[    0.000000]   Normal zone: 0 pages used for memmap
>[    0.000000]   Movable zone: 0 pages used for memmap
>[    0.000000] ACPI: PM-Timer IO Port: 0x808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
>[    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
>[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e1000
>[    0.000000] PM: Registered nosave memory: 00000000000e1000 - 0000000000100000
>[    0.000000] Allocating PCI resources starting at c0000000 (gap: bde00000:40f20000)
>[    0.000000] PERCPU: Allocating 69632 bytes of per cpu data
>[    0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 764352
>[    0.000000] Kernel command line: root=UUID=a19dea3a-7f24-4c67-a935-fc53b3ef9f6d ro quiet splash 
>[    0.000000] Initializing CPU#0
>[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
>[    0.000000] Extended CMOS year: 2000
>[    0.000000] TSC: PIT calibration matches PMTIMER. 1 loops
>[    0.000000] Detected 1995.046 MHz processor.
>[    0.004000] Console: colour VGA+ 80x25
>[    0.004000] console [tty0] enabled
>[    0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.004000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>[    0.004000] allocated 31457280 bytes of page_cgroup
>[    0.004000] please try cgroup_disable=memory option if you don't want
>[    0.004000] Scanning for low memory corruption every 60 seconds
>[    0.004000] Checking aperture...
>[    0.004000] No AGP bridge found
>[    0.004000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.004000] Memory: 3011612k/3110400k available (4641k kernel code, 456k absent, 97600k reserved, 2513k data, 528k init)
>[    0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>[    0.004000] hpet clockevent registered
>[    0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
>[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.09 BogoMIPS (lpj=7980184)
>[    0.004000] Security Framework initialized
>[    0.004000] SELinux:  Disabled at boot.
>[    0.004000] AppArmor: AppArmor initialized
>[    0.004000] Mount-cache hash table entries: 256
>[    0.004000] Initializing cgroup subsys ns
>[    0.004000] Initializing cgroup subsys cpuacct
>[    0.004000] Initializing cgroup subsys memory
>[    0.004000] Initializing cgroup subsys freezer
>[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
>[    0.004000] CPU: L2 cache: 3072K
>[    0.004000] CPU: Physical Processor ID: 0
>[    0.004000] CPU: Processor Core ID: 0
>[    0.004000] using mwait in idle threads.
>[    0.004000] ACPI: Core revision 20080926
>[    0.007092] ACPI: Checking initramfs for custom DSDT
>[    0.388045] Setting APIC routing to flat
>[    0.388441] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.431256] CPU0: Intel(R) Core(TM)2 Duo CPU     P7350  @ 2.00GHz stepping 06
>[    0.432001] Booting processor 1 APIC 0x1 ip 0x6000
>[    0.004000] Initializing CPU#1
>[    0.004000] Calibrating delay using timer specific routine.. 3989.98 BogoMIPS (lpj=7979968)
>[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
>[    0.004000] CPU: L2 cache: 3072K
>[    0.004000] CPU: Physical Processor ID: 0
>[    0.004000] CPU: Processor Core ID: 1
>[    0.516669] CPU1: Intel(R) Core(TM)2 Duo CPU     P7350  @ 2.00GHz stepping 06
>[    0.516693] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>[    0.520039] Brought up 2 CPUs
>[    0.520041] Total of 2 processors activated (7980.07 BogoMIPS).
>[    0.520090] CPU0 attaching sched-domain:
>[    0.520092]  domain 0: span 0-1 level MC
>[    0.520094]   groups: 0 1
>[    0.520100] CPU1 attaching sched-domain:
>[    0.520101]  domain 0: span 0-1 level MC
>[    0.520103]   groups: 1 0
>[    0.520167] net_namespace: 1400 bytes
>[    0.520167] Booting paravirtualized kernel on bare hardware
>[    0.520233] Time: 18:18:55  Date: 01/29/09
>[    0.520233] regulator: core version 0.5
>[    0.520233] NET: Registered protocol family 16
>[    0.520233] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.520233] ACPI: bus type pci registered
>[    0.520233] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>[    0.520233] PCI: Not using MMCONFIG.
>[    0.520233] PCI: Using configuration type 1 for base access
>[    0.525496] ACPI: EC: EC description table is found, configuring boot EC
>[    0.524031] ACPI: EC: non-query interrupt received, switching to interrupt mode
>[    0.542061] ACPI: BIOS _OSI(Linux) query ignored
>[    0.547130] ACPI: Interpreter enabled
>[    0.547133] ACPI: (supports S0 S1 S3 S4 S5)
>[    0.547158] ACPI: Using IOAPIC for interrupt routing
>[    0.547300] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>[    0.551965] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
>[    0.562484] PCI: Using MMCONFIG at e0000000 - efffffff
>[    0.576184] ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
>[    0.576187] ACPI: EC: driver started in interrupt mode
>[    0.576273] ACPI: No dock devices found.
>[    0.576392] ACPI: PCI Root Bridge [PCI0] (0000:00)
>[    0.576419] pci 0000:00:02.0: reg 10 64bit mmio: [0xfd800000-0xfdbfffff]
>[    0.576419] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
>[    0.576419] pci 0000:00:02.0: reg 20 io port: [0xcc00-0xcc07]
>[    0.576419] pci 0000:00:02.1: reg 10 64bit mmio: [0xfdd00000-0xfddfffff]
>[    0.576419] pci 0000:00:1a.0: reg 20 io port: [0xc880-0xc89f]
>[    0.576419] pci 0000:00:1a.1: reg 20 io port: [0xc800-0xc81f]
>[    0.576419] pci 0000:00:1a.2: reg 20 io port: [0xc480-0xc49f]
>[    0.576483] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfdefbc00-0xfdefbfff]
>[    0.576532] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>[    0.576537] pci 0000:00:1a.7: PME# disabled
>[    0.576596] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdef4000-0xfdef7fff]
>[    0.576638] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.576642] pci 0000:00:1b.0: PME# disabled
>[    0.576709] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.576714] pci 0000:00:1c.0: PME# disabled
>[    0.576784] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>[    0.576788] pci 0000:00:1c.1: PME# disabled
>[    0.576858] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>[    0.576863] pci 0000:00:1c.2: PME# disabled
>[    0.576933] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>[    0.576937] pci 0000:00:1c.3: PME# disabled
>[    0.577008] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>[    0.577012] pci 0000:00:1c.4: PME# disabled
>[    0.577084] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
>[    0.577088] pci 0000:00:1c.5: PME# disabled
>[    0.577166] pci 0000:00:1d.0: reg 20 io port: [0xc400-0xc41f]
>[    0.577254] pci 0000:00:1d.1: reg 20 io port: [0xc080-0xc09f]
>[    0.577342] pci 0000:00:1d.2: reg 20 io port: [0xc000-0xc01f]
>[    0.577431] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdefb800-0xfdefbbff]
>[    0.577479] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>[    0.577484] pci 0000:00:1d.7: PME# disabled
>[    0.577713] pci 0000:00:1f.2: reg 10 io port: [0xbc00-0xbc07]
>[    0.577721] pci 0000:00:1f.2: reg 14 io port: [0xb880-0xb883]
>[    0.577728] pci 0000:00:1f.2: reg 18 io port: [0xb800-0xb807]
>[    0.577736] pci 0000:00:1f.2: reg 1c io port: [0xb480-0xb483]
>[    0.577743] pci 0000:00:1f.2: reg 20 io port: [0xb400-0xb41f]
>[    0.577751] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfdefb000-0xfdefb7ff]
>[    0.577771] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.577775] pci 0000:00:1f.2: PME# disabled
>[    0.577976] pci 0000:02:00.0: reg 10 64bit mmio: [0xfdffe000-0xfdffffff]
>[    0.578092] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>[    0.578113] pci 0000:02:00.0: PME# disabled
>[    0.578214] pci 0000:00:1c.1: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
>[    0.578321] pci 0000:03:00.0: supports D1 D2
>[    0.578397] pci 0000:00:1c.2: bridge io port: [0xd000-0xdfff]
>[    0.578402] pci 0000:00:1c.2: bridge 32bit mmio: [0xfe000000-0xfeafffff]
>[    0.578410] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xfa000000-0xfcefffff]
>[    0.578472] pci 0000:04:00.0: reg 10 32bit mmio: [0xfeaff800-0xfeafffff]
>[    0.578484] pci 0000:04:00.0: reg 14 32bit mmio: [0xfeaf8000-0xfeafbfff]
>[    0.578550] pci 0000:04:00.0: supports D1 D2
>[    0.578551] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot
>[    0.578558] pci 0000:04:00.0: PME# disabled
>[    0.578658] pci 0000:03:00.0: bridge 32bit mmio: [0xfea00000-0xfeafffff]
>[    0.580176] pci 0000:08:00.0: reg 10 io port: [0xe800-0xe8ff]
>[    0.580249] pci 0000:08:00.0: reg 18 64bit mmio: [0xfcfff000-0xfcffffff]
>[    0.580296] pci 0000:08:00.0: reg 20 64bit mmio: [0xfcfe0000-0xfcfeffff]
>[    0.580323] pci 0000:08:00.0: reg 30 32bit mmio: [0xfebf0000-0xfebfffff]
>[    0.580363] pci 0000:08:00.0: supports D1 D2
>[    0.580364] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.580378] pci 0000:08:00.0: PME# disabled
>[    0.580516] pci 0000:00:1c.5: bridge io port: [0xe000-0xefff]
>[    0.580521] pci 0000:00:1c.5: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
>[    0.580529] pci 0000:00:1c.5: bridge 64bit mmio pref: [0xfcf00000-0xfcffffff]
>[    0.580588] pci 0000:00:1e.0: transparent bridge
>[    0.580645] bus 00 -> node 0
>[    0.580654] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>[    0.581024] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
>[    0.581176] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>[    0.581357] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
>[    0.581507] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
>[    0.617146] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12)
>[    0.617146] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 10 12)
>[    0.617146] ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
>[    0.617146] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 12)
>[    0.617146] ACPI: PCI Interrupt Link [LNKE] (IRQs 6) *0, disabled.
>[    0.617245] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 12)
>[    0.617461] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 12)
>[    0.617678] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12)
>[    0.623207] ACPI Warning (tbutils-0217): Incorrect checksum in table [ATKG] - 91, should be E5 [20080926]
>[    0.623240] ACPI: WMI: Mapper loaded
>[    0.623240] SCSI subsystem initialized
>[    0.623240] libata version 3.00 loaded.
>[    0.623240] usbcore: registered new interface driver usbfs
>[    0.623240] usbcore: registered new interface driver hub
>[    0.623240] usbcore: registered new device driver usb
>[    0.624031] PCI: Using ACPI for IRQ routing
>[    0.640016] Bluetooth: Core ver 2.13
>[    0.640028] NET: Registered protocol family 31
>[    0.640028] Bluetooth: HCI device and connection manager initialized
>[    0.640028] Bluetooth: HCI socket layer initialized
>[    0.640028] NET: Registered protocol family 8
>[    0.640028] NET: Registered protocol family 20
>[    0.640037] NetLabel: Initializing
>[    0.640037] NetLabel:  domain hash size = 128
>[    0.640037] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.640037] NetLabel:  unlabeled traffic allowed by default
>[    0.640041] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>[    0.640044] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
>[    0.644058] AppArmor: AppArmor Filesystem Enabled
>[    0.648008] Switched to high resolution mode on CPU 0
>[    0.648723] Switched to high resolution mode on CPU 1
>[    0.660008] pnp: PnP ACPI init
>[    0.660017] ACPI: bus type pnp registered
>[    0.663871] pnp: PnP ACPI: found 15 devices
>[    0.663873] ACPI: ACPI bus type pnp unregistered
>[    0.663882] system 00:01: iomem range 0xfed10000-0xfed19fff has been reserved
>[    0.663890] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
>[    0.663893] system 00:08: ioport range 0x800-0x87f has been reserved
>[    0.663895] system 00:08: ioport range 0x400-0x41f has been reserved
>[    0.663897] system 00:08: ioport range 0x500-0x57f has been reserved
>[    0.663899] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
>[    0.663902] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
>[    0.663904] system 00:08: iomem range 0xfed45000-0xfed89fff has been reserved
>[    0.663906] system 00:08: iomem range 0xfed90000-0xfed90fff has been reserved
>[    0.663909] system 00:08: iomem range 0xfed91000-0xfed91fff has been reserved
>[    0.663911] system 00:08: iomem range 0xfed92000-0xfed92fff has been reserved
>[    0.663913] system 00:08: iomem range 0xfed93000-0xfed93fff has been reserved
>[    0.663916] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
>[    0.663918] system 00:08: iomem range 0xfff00000-0xffffffff has been reserved
>[    0.663924] system 00:0a: iomem range 0xffa00000-0xffbfffff could not be reserved
>[    0.663927] system 00:0a: iomem range 0xffe00000-0xffffffff could not be reserved
>[    0.663931] system 00:0b: iomem range 0xffc00000-0xffdfffff has been reserved
>[    0.663936] system 00:0c: ioport range 0x250-0x253 has been reserved
>[    0.663938] system 00:0c: ioport range 0x256-0x25f has been reserved
>[    0.663941] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
>[    0.663943] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
>[    0.663945] system 00:0c: iomem range 0xfec10000-0xfec17fff has been reserved
>[    0.663947] system 00:0c: iomem range 0xfec18000-0xfec1ffff has been reserved
>[    0.663950] system 00:0c: iomem range 0xfec20000-0xfec27fff has been reserved
>[    0.663952] system 00:0c: iomem range 0xfec38000-0xfec3ffff has been reserved
>[    0.663957] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
>[    0.663962] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
>[    0.663964] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
>[    0.663966] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
>[    0.663968] system 00:0e: iomem range 0x100000-0xbddfffff could not be reserved
>[    0.668988] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
>[    0.668990] pci 0000:00:1c.0:   IO window: disabled
>[    0.668996] pci 0000:00:1c.0:   MEM window: disabled
>[    0.669000] pci 0000:00:1c.0:   PREFETCH window: disabled
>[    0.669008] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
>[    0.669009] pci 0000:00:1c.1:   IO window: disabled
>[    0.669016] pci 0000:00:1c.1:   MEM window: 0xfdf00000-0xfdffffff
>[    0.669020] pci 0000:00:1c.1:   PREFETCH window: disabled
>[    0.669028] pci 0000:03:00.0: PCI bridge, secondary bus 0000:04
>[    0.669030] pci 0000:03:00.0:   IO window: disabled
>[    0.669037] pci 0000:03:00.0:   MEM window: 0xfea00000-0xfeafffff
>[    0.669043] pci 0000:03:00.0:   PREFETCH window: disabled
>[    0.669054] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
>[    0.669057] pci 0000:00:1c.2:   IO window: 0xd000-0xdfff
>[    0.669063] pci 0000:00:1c.2:   MEM window: 0xfe000000-0xfeafffff
>[    0.669068] pci 0000:00:1c.2:   PREFETCH window: 0x000000fa000000-0x000000fcefffff
>[    0.669076] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06
>[    0.669077] pci 0000:00:1c.3:   IO window: disabled
>[    0.669083] pci 0000:00:1c.3:   MEM window: disabled
>[    0.669088] pci 0000:00:1c.3:   PREFETCH window: disabled
>[    0.669095] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:07
>[    0.669097] pci 0000:00:1c.4:   IO window: disabled
>[    0.669102] pci 0000:00:1c.4:   MEM window: disabled
>[    0.669107] pci 0000:00:1c.4:   PREFETCH window: disabled
>[    0.669114] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:08
>[    0.669118] pci 0000:00:1c.5:   IO window: 0xe000-0xefff
>[    0.669124] pci 0000:00:1c.5:   MEM window: 0xfeb00000-0xfebfffff
>[    0.669128] pci 0000:00:1c.5:   PREFETCH window: 0x000000fcf00000-0x000000fcffffff
>[    0.669136] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09
>[    0.669138] pci 0000:00:1e.0:   IO window: disabled
>[    0.669143] pci 0000:00:1e.0:   MEM window: disabled
>[    0.669148] pci 0000:00:1e.0:   PREFETCH window: disabled
>[    0.669165] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[    0.669171] pci 0000:00:1c.0: setting latency timer to 64
>[    0.669180] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>[    0.669185] pci 0000:00:1c.1: setting latency timer to 64
>[    0.669195] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>[    0.669200] pci 0000:00:1c.2: setting latency timer to 64
>[    0.669215] pci 0000:03:00.0: setting latency timer to 64
>[    0.669225] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>[    0.669229] pci 0000:00:1c.3: setting latency timer to 64
>[    0.669238] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[    0.669243] pci 0000:00:1c.4: setting latency timer to 64
>[    0.669251] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>[    0.669256] pci 0000:00:1c.5: setting latency timer to 64
>[    0.669264] pci 0000:00:1e.0: setting latency timer to 64
>[    0.669268] bus: 00 index 0 io port: [0x00-0xffff]
>[    0.669270] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
>[    0.669272] bus: 01 index 0 mmio: [0x0-0x0]
>[    0.669273] bus: 01 index 1 mmio: [0x0-0x0]
>[    0.669275] bus: 01 index 2 mmio: [0x0-0x0]
>[    0.669276] bus: 01 index 3 mmio: [0x0-0x0]
>[    0.669277] bus: 02 index 0 mmio: [0x0-0x0]
>[    0.669279] bus: 02 index 1 mmio: [0xfdf00000-0xfdffffff]
>[    0.669281] bus: 02 index 2 mmio: [0x0-0x0]
>[    0.669282] bus: 02 index 3 mmio: [0x0-0x0]
>[    0.669284] bus: 03 index 0 io port: [0xd000-0xdfff]
>[    0.669285] bus: 03 index 1 mmio: [0xfe000000-0xfeafffff]
>[    0.669287] bus: 03 index 2 mmio: [0xfa000000-0xfcefffff]
>[    0.669289] bus: 03 index 3 mmio: [0x0-0x0]
>[    0.669290] bus: 04 index 0 mmio: [0x0-0x0]
>[    0.669292] bus: 04 index 1 mmio: [0xfea00000-0xfeafffff]
>[    0.669293] bus: 04 index 2 mmio: [0x0-0x0]
>[    0.669295] bus: 04 index 3 mmio: [0x0-0x0]
>[    0.669296] bus: 06 index 0 mmio: [0x0-0x0]
>[    0.669298] bus: 06 index 1 mmio: [0x0-0x0]
>[    0.669299] bus: 06 index 2 mmio: [0x0-0x0]
>[    0.669300] bus: 06 index 3 mmio: [0x0-0x0]
>[    0.669302] bus: 07 index 0 mmio: [0x0-0x0]
>[    0.669303] bus: 07 index 1 mmio: [0x0-0x0]
>[    0.669305] bus: 07 index 2 mmio: [0x0-0x0]
>[    0.669306] bus: 07 index 3 mmio: [0x0-0x0]
>[    0.669308] bus: 08 index 0 io port: [0xe000-0xefff]
>[    0.669309] bus: 08 index 1 mmio: [0xfeb00000-0xfebfffff]
>[    0.669311] bus: 08 index 2 mmio: [0xfcf00000-0xfcffffff]
>[    0.669313] bus: 08 index 3 mmio: [0x0-0x0]
>[    0.669314] bus: 09 index 0 mmio: [0x0-0x0]
>[    0.669316] bus: 09 index 1 mmio: [0x0-0x0]
>[    0.669317] bus: 09 index 2 mmio: [0x0-0x0]
>[    0.669318] bus: 09 index 3 io port: [0x00-0xffff]
>[    0.669320] bus: 09 index 4 mmio: [0x000000-0xffffffffffffffff]
>[    0.669328] NET: Registered protocol family 2
>[    0.712052] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>[    0.712592] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>[    0.714594] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    0.715189] TCP: Hash tables configured (established 262144 bind 65536)
>[    0.715191] TCP reno registered
>[    0.724109] NET: Registered protocol family 1
>[    0.724233] checking if image is initramfs... it is
>[    1.475615] Freeing initrd memory: 7803k freed
>[    1.478646] Simple Boot Flag at 0x51 set to 0x1
>[    1.479384] audit: initializing netlink socket (disabled)
>[    1.479404] type=2000 audit(1233253135.476:1): initialized
>[    1.488094] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    1.490349] VFS: Disk quotas dquot_6.5.1
>[    1.490422] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    1.491301] msgmni has been set to 5898
>[    1.491477] alg: No test for stdrng (krng)
>[    1.491489] io scheduler noop registered
>[    1.491490] io scheduler anticipatory registered
>[    1.491492] io scheduler deadline registered
>[    1.491553] io scheduler cfq registered (default)
>[    1.491565] pci 0000:00:02.0: Boot video device
>[    1.495748] pcieport-driver 0000:00:1c.0: setting latency timer to 64
>[    1.495797] pcieport-driver 0000:00:1c.0: found MSI capability
>[    1.495834] pcieport-driver 0000:00:1c.0: irq 2303 for MSI/MSI-X
>[    1.495849] pci_express 0000:00:1c.0:pcie00: allocate port service
>[    1.495885] pci_express 0000:00:1c.0:pcie03: allocate port service
>[    1.495986] pcieport-driver 0000:00:1c.1: setting latency timer to 64
>[    1.496035] pcieport-driver 0000:00:1c.1: found MSI capability
>[    1.496069] pcieport-driver 0000:00:1c.1: irq 2302 for MSI/MSI-X
>[    1.496085] pci_express 0000:00:1c.1:pcie00: allocate port service
>[    1.496119] pci_express 0000:00:1c.1:pcie03: allocate port service
>[    1.496216] pcieport-driver 0000:00:1c.2: setting latency timer to 64
>[    1.496265] pcieport-driver 0000:00:1c.2: found MSI capability
>[    1.496298] pcieport-driver 0000:00:1c.2: irq 2301 for MSI/MSI-X
>[    1.496314] pci_express 0000:00:1c.2:pcie00: allocate port service
>[    1.496347] pci_express 0000:00:1c.2:pcie02: allocate port service
>[    1.496382] pci_express 0000:00:1c.2:pcie03: allocate port service
>[    1.496479] pcieport-driver 0000:00:1c.3: setting latency timer to 64
>[    1.496527] pcieport-driver 0000:00:1c.3: found MSI capability
>[    1.496560] pcieport-driver 0000:00:1c.3: irq 2300 for MSI/MSI-X
>[    1.496576] pci_express 0000:00:1c.3:pcie00: allocate port service
>[    1.496610] pci_express 0000:00:1c.3:pcie03: allocate port service
>[    1.496707] pcieport-driver 0000:00:1c.4: setting latency timer to 64
>[    1.496754] pcieport-driver 0000:00:1c.4: found MSI capability
>[    1.496787] pcieport-driver 0000:00:1c.4: irq 2299 for MSI/MSI-X
>[    1.496803] pci_express 0000:00:1c.4:pcie00: allocate port service
>[    1.496836] pci_express 0000:00:1c.4:pcie03: allocate port service
>[    1.496934] pcieport-driver 0000:00:1c.5: setting latency timer to 64
>[    1.496981] pcieport-driver 0000:00:1c.5: found MSI capability
>[    1.497021] pcieport-driver 0000:00:1c.5: irq 2298 for MSI/MSI-X
>[    1.497036] pci_express 0000:00:1c.5:pcie00: allocate port service
>[    1.497072] pci_express 0000:00:1c.5:pcie03: allocate port service
>[    1.497250] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    1.497766] pciehp 0000:00:1c.2:pcie02: HPC vendor_id 8086 device_id 2944 ss_vid 0 ss_did 0
>[    1.497830] pciehp 0000:00:1c.2:pcie02: service driver pciehp loaded
>[    1.497860] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>[    1.498133] ACPI: AC Adapter [AC0] (on-line)
>[    1.557674] ACPI: Battery Slot [BAT0] (battery present)
>[    1.557993] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>[    1.557996] ACPI: Power Button (FF) [PWRF]
>[    1.558084] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
>[    1.558093] ACPI: Sleep Button (CM) [SLPB]
>[    1.558217] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
>[    1.565595] ACPI: Lid Switch [LID]
>[    1.566485] ACPI: SSDT BDD993F0, 0206 (r1  PmRef  Cpu0Ist     3000 INTL 20051117)
>[    1.567164] ACPI: SSDT BDD99690, 06C5 (r1  PmRef  Cpu0Cst     3001 INTL 20051117)
>[    1.568077] Monitor-Mwait will be used to enter C-1 state
>[    1.568123] processor ACPI_CPU:00: registered as cooling_device0
>[    1.568127] ACPI: Processor [P001] (supports 8 throttling states)
>[    1.568534] ACPI: SSDT BDD99320, 00CC (r1  PmRef  Cpu1Ist     3000 INTL 20051117)
>[    1.569029] ACPI: SSDT BDD99600, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20051117)
>[    1.570423] processor ACPI_CPU:01: registered as cooling_device1
>[    1.570427] ACPI: Processor [P002] (supports 8 throttling states)
>[    1.581059] thermal LNXTHERM:01: registered as thermal_zone0
>[    1.582407] ACPI: Thermal Zone [THRM] (47 C)
>[    1.613303] Linux agpgart interface v0.103
>[    1.613307] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
>[    1.615139] brd: module loaded
>[    1.615796] loop: module loaded
>[    1.615969] Fixed MDIO Bus: probed
>[    1.615975] PPP generic driver version 2.4.2
>[    1.616106] input: Macintosh mouse button emulation as /devices/virtual/input/input3
>[    1.616154] Driver 'sd' needs updating - please use bus_type methods
>[    1.616185] Driver 'sr' needs updating - please use bus_type methods
>[    1.616273] ahci 0000:00:1f.2: version 3.0
>[    1.616286] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>[    1.616326] ahci 0000:00:1f.2: irq 2297 for MSI/MSI-X
>[    1.616411] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 1.5 Gbps 0x23 impl SATA mode
>[    1.616414] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems 
>[    1.616419] ahci 0000:00:1f.2: setting latency timer to 64
>[    1.616653] scsi0 : ahci
>[    1.616785] scsi1 : ahci
>[    1.616885] scsi2 : ahci
>[    1.616986] scsi3 : ahci
>[    1.617087] scsi4 : ahci
>[    1.617185] scsi5 : ahci
>[    1.617444] ata1: SATA max UDMA/133 abar m2048@0xfdefb000 port 0xfdefb100 irq 2297
>[    1.617447] ata2: SATA max UDMA/133 abar m2048@0xfdefb000 port 0xfdefb180 irq 2297
>[    1.617449] ata3: DUMMY
>[    1.617450] ata4: DUMMY
>[    1.617451] ata5: DUMMY
>[    1.617454] ata6: SATA max UDMA/133 abar m2048@0xfdefb000 port 0xfdefb380 irq 2297
>[    1.936018] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    1.937425] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>[    1.937620] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
>[    1.937623] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>[    1.938438] ata1.00: ATA-8: Hitachi HTS543232L9A300, FB4OC40C, max UDMA/133
>[    1.938440] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
>[    1.940021] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>[    1.940214] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
>[    1.940217] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>[    1.941051] ata1.00: configured for UDMA/133
>[    2.276018] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    2.280980] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
>[    2.280983] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>[    2.284899] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50N, RR07, max UDMA/133
>[    2.291117] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
>[    2.291120] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>[    2.294989] ata2.00: configured for UDMA/133
>[    2.740016] ata6: SATA link down (SStatus 0 SControl 300)
>[    2.756097] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54323 FB4O PQ: 0 ANSI: 5
>[    2.756254] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
>[    2.756270] sd 0:0:0:0: [sda] Write Protect is off
>[    2.756272] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    2.756296] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.756360] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
>[    2.756373] sd 0:0:0:0: [sda] Write Protect is off
>[    2.756375] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    2.756399] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.756402]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 > sda4
>[    2.840290] sd 0:0:0:0: [sda] Attached SCSI disk
>[    2.840376] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    2.843420] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T50N  RR07 PQ: 0 ANSI: 5
>[    3.171041] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>[    3.171044] Uniform CD-ROM driver Revision: 3.20
>[    3.171168] sr 1:0:0:0: Attached scsi CD-ROM sr0
>[    3.171248] sr 1:0:0:0: Attached scsi generic sg1 type 5
>[    3.172991] usbcore: registered new interface driver libusual
>[    3.173078] usbcore: registered new interface driver usbserial
>[    3.173110] USB Serial support registered for generic
>[    3.173145] usbcore: registered new interface driver usbserial_generic
>[    3.173147] usbserial: USB Serial Driver core
>[    3.173244] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>[    3.176278] i8042.c: Detected active multiplexing controller, rev 1.1.
>[    3.177252] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    3.177256] serio: i8042 AUX0 port at 0x60,0x64 irq 12
>[    3.177258] serio: i8042 AUX1 port at 0x60,0x64 irq 12
>[    3.177260] serio: i8042 AUX2 port at 0x60,0x64 irq 12
>[    3.177262] serio: i8042 AUX3 port at 0x60,0x64 irq 12
>[    3.189079] mice: PS/2 mouse device common for all mice
>[    3.237101] rtc_cmos 00:03: RTC can wake from S4
>[    3.237164] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>[    3.237193] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>[    3.237292] device-mapper: uevent: version 1.0.3
>[    3.237407] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>[    3.237473] device-mapper: multipath: version 1.0.5 loaded
>[    3.237475] device-mapper: multipath round-robin: version 1.0.0 loaded
>[    3.237552] cpuidle: using governor ladder
>[    3.237553] cpuidle: using governor menu
>[    3.237971] TCP cubic registered
>[    3.238054] NET: Registered protocol family 10
>[    3.238395] lo: Disabled Privacy Extensions
>[    3.238658] NET: Registered protocol family 17
>[    3.238700] Bluetooth: L2CAP ver 2.11
>[    3.238701] Bluetooth: L2CAP socket layer initialized
>[    3.238704] Bluetooth: SCO (Voice Link) ver 0.6
>[    3.238705] Bluetooth: SCO socket layer initialized
>[    3.238726] Bluetooth: RFCOMM socket layer initialized
>[    3.238732] Bluetooth: RFCOMM TTY layer initialized
>[    3.238733] Bluetooth: RFCOMM ver 1.10
>[    3.238875] registered taskstats version 1
>[    3.238999]   Magic number: 9:329:343
>[    3.239016] tty tty60: hash matches
>[    3.239086] rtc_cmos 00:03: setting system clock to 2009-01-29 18:18:58 UTC (1233253138)
>[    3.239089] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
>[    3.239090] EDD information not available.
>[    3.239126] Freeing unused kernel memory: 528k freed
>[    3.239305] Write protecting the kernel read-only data: 6564k
>[    3.275071] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
>[    3.364092] fuse init (API version 7.10)
>[    3.585847] uhci_hcd: USB Universal Host Controller Interface driver
>[    3.585904] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[    3.586182] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[    3.586187] uhci_hcd 0000:00:1a.0: UHCI Host Controller
>[    3.586263] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>[    3.589358] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c880
>[    3.589445] usb usb1: configuration #1 chosen from 1 choice
>[    3.589471] hub 1-0:1.0: USB hub found
>[    3.589476] hub 1-0:1.0: 2 ports detected
>[    3.589628] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>[    3.589648] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[    3.589654] uhci_hcd 0000:00:1a.1: UHCI Host Controller
>[    3.589694] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>[    3.589736] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c800
>[    3.589855] usb usb2: configuration #1 chosen from 1 choice
>[    3.589878] hub 2-0:1.0: USB hub found
>[    3.589883] hub 2-0:1.0: 2 ports detected
>[    3.589978] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>[    3.589986] uhci_hcd 0000:00:1a.2: setting latency timer to 64
>[    3.589990] uhci_hcd 0000:00:1a.2: UHCI Host Controller
>[    3.590030] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
>[    3.590121] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000c480
>[    3.590212] usb usb3: configuration #1 chosen from 1 choice
>[    3.590236] hub 3-0:1.0: USB hub found
>[    3.590241] hub 3-0:1.0: 2 ports detected
>[    3.590325] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>[    3.590334] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[    3.590386] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>[    3.590431] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
>[    3.590529] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c400
>[    3.590614] usb usb4: configuration #1 chosen from 1 choice
>[    3.590638] hub 4-0:1.0: USB hub found
>[    3.590643] hub 4-0:1.0: 2 ports detected
>[    3.590726] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>[    3.590734] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[    3.590738] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>[    3.590776] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
>[    3.590870] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c080
>[    3.590972] usb usb5: configuration #1 chosen from 1 choice
>[    3.590994] hub 5-0:1.0: USB hub found
>[    3.591000] hub 5-0:1.0: 2 ports detected
>[    3.591088] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>[    3.591096] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[    3.591100] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>[    3.591138] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
>[    3.591191] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c000
>[    3.591317] usb usb6: configuration #1 chosen from 1 choice
>[    3.591342] hub 6-0:1.0: USB hub found
>[    3.591349] hub 6-0:1.0: 2 ports detected
>[    3.599505] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    3.599508] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
>[    3.599538] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>[    3.599569] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[    3.599575] ehci_hcd 0000:00:1a.7: EHCI Host Controller
>[    3.599632] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
>[    3.603547] ehci_hcd 0000:00:1a.7: debug port 1
>[    3.603554] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
>[    3.603560] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdefbc00
>[    3.616013] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>[    3.616096] usb usb7: configuration #1 chosen from 1 choice
>[    3.616122] hub 7-0:1.0: USB hub found
>[    3.616131] hub 7-0:1.0: 6 ports detected
>[    3.616258] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>[    3.616280] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[    3.616284] ehci_hcd 0000:00:1d.7: EHCI Host Controller
>[    3.616333] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
>[    3.620253] ehci_hcd 0000:00:1d.7: debug port 1
>[    3.620265] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>[    3.620271] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdefb800
>[    3.642808] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>[    3.642902] usb usb8: configuration #1 chosen from 1 choice
>[    3.642931] hub 8-0:1.0: USB hub found
>[    3.642938] hub 8-0:1.0: 6 ports detected
>[    3.646372] ohci1394 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>[    3.653994] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>[    3.654023] r8169 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[    3.654062] r8169 0000:08:00.0: setting latency timer to 64
>[    3.654278] r8169 0000:08:00.0: irq 2296 for MSI/MSI-X
>[    3.654852] eth0: RTL8168c/8111c at 0xffffc2001009c000, 00:23:54:8a:6d:41, XID 3c4000c0 IRQ 2296
>[    3.696110] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]  MMIO=[feaff800-feafffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>[    4.209016] usb 8-5: new high speed USB device using ehci_hcd and address 3
>[    4.394639] usb 8-5: configuration #1 chosen from 1 choice
>[    4.436858] EXT4-fs: barriers enabled
>[    4.447337] kjournald2 starting.  Commit interval 5 seconds
>[    4.447345] EXT4-fs: delayed allocation enabled
>[    4.447347] EXT4-fs: file extents enabled
>[    4.447404] EXT4-fs: mballoc enabled
>[    4.447407] EXT4-fs: mounted filesystem with ordered data mode.
>[    4.636011] usb 3-1: new full speed USB device using uhci_hcd and address 2
>[    4.812220] usb 3-1: configuration #1 chosen from 1 choice
>[    5.052010] usb 3-2: new full speed USB device using uhci_hcd and address 3
>[    5.227204] usb 3-2: configuration #1 chosen from 1 choice
>[    5.469012] usb 4-2: new low speed USB device using uhci_hcd and address 2
>[    5.751606] usb 4-2: configuration #1 chosen from 1 choice
>[   10.297123] udev: starting version 137
>[   10.507288] Bluetooth: Generic Bluetooth USB driver ver 0.3
>[   10.507399] usbcore: registered new interface driver btusb
>[   10.549526] agpgart-intel 0000:00:00.0: Intel Mobile Intel? GM45 Express Chipset
>[   10.550571] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
>[   10.554026] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
>[   10.581936] asus-laptop: Asus Laptop Support version 0.42
>[   10.586565] asus-laptop:   N20A model detected
>[   10.587749] asus-laptop: Brightness ignored, must be controlled by ACPI video driver
>[   10.887053] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>[   10.929066] cfg80211: Using static regulatory domain info
>[   10.929069] cfg80211: Regulatory domain: US
>[   10.929071] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[   10.929073] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
>[   10.929075] 	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>[   10.929077] 	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>[   10.929079] 	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>[   10.929081] 	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>[   10.929083] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
>[   10.929085] cfg80211: Calling CRDA for country: US
>[   11.035496] usbcore: registered new interface driver hiddev
>[   11.079137] iTCO_vendor_support: vendor-support=0
>[   11.085759] input: Chicony Saitek Eclipse Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-2/4-2:1.0/input/input5
>[   11.102403] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.04
>[   11.102547] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0860)
>[   11.102647] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[   11.120195] generic-usb 0003:06A3:8020.0001: input,hidraw0: USB HID v1.11 Keyboard [Chicony Saitek Eclipse Keyboard] on usb-0000:00:1d.0-2/input0
>[   11.172933] Linux video capture interface: v2.00
>[   11.227500] input: Chicony Saitek Eclipse Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-2/4-2:1.1/input/input6
>[   11.253207] generic-usb 0003:06A3:8020.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Chicony Saitek Eclipse Keyboard] on usb-0000:00:1d.0-2/input1
>[   11.253228] usbcore: registered new interface driver usbhid
>[   11.253249] usbhid: v2.6:USB HID core driver
>[   11.399149] input: PC Speaker as /devices/platform/pcspkr/input/input7
>[   11.532882] uvcvideo: Found UVC 1.00 device USB2.0 UVC 1.3M WebCam (064e:a116)
>[   11.534298] input: USB2.0 UVC 1.3M WebCam as /devices/pci0000:00/0000:00:1d.7/usb8/8-5/8-5:1.0/input/input8
>[   11.545092] usbcore: registered new interface driver uvcvideo
>[   11.545113] USB Video Class driver (v0.1.0)
>[   12.159336] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
>[   12.159339] iwlagn: Copyright(c) 2003-2008 Intel Corporation
>[   12.159474] iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[   12.159502] iwlagn 0000:02:00.0: setting latency timer to 64
>[   12.159582] iwlagn: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
>[   12.192335] iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels
>[   12.192516] iwlagn 0000:02:00.0: PCI INT A disabled
>[   12.193190] phy0: Selected rate control algorithm 'iwl-agn-rs'
>[   12.286654] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04711/0x200000
>[   12.321596] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
>[   12.390165] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[   12.390220] HDA Intel 0000:00:1b.0: setting latency timer to 64
>[   13.117367] lp: driver loaded but no devices found
>[   13.236080] ppdev: user-space parallel port driver
>[   13.448753] EXT4 FS on sda8, internal journal on sda8:8
>[   13.597029] hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x003b8000
>[  690.029329] kjournald starting.  Commit interval 5 seconds
>[  690.029575] EXT3 FS on sda6, internal journal
>[  690.029579] EXT3-fs: mounted filesystem with ordered data mode.
>[  690.092877] kjournald starting.  Commit interval 5 seconds
>[  690.093259] EXT3 FS on sda4, internal journal
>[  690.093263] EXT3-fs: mounted filesystem with ordered data mode.
>[  690.761441] type=1505 audit(1233250225.837:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=10306
>[  690.913916] type=1505 audit(1233250225.989:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=10311
>[  690.914075] type=1505 audit(1233250225.989:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=10311
>[  694.496563] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
>[  698.240414] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>[  698.240420] Bluetooth: BNEP filters: protocol multicast
>[  698.293250] Bridge firewalling registered
>[  702.209852] [drm] Initialized drm 1.1.0 20060810
>[  702.230235] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[  702.230245] pci 0000:00:02.0: setting latency timer to 64
>[  702.230742] pci 0000:00:02.0: irq 2295 for MSI/MSI-X
>[  702.231001] [drm] Initialized i915 1.6.0 20080730 on minor 0
>[  702.697646] r8169: eth0: link down
>[  702.699255] ADDRCONF(NETDEV_UP): eth0: link is not ready
>[  702.714710] iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[  702.714845] iwlagn 0000:02:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006)
>[  702.715021] iwlagn 0000:02:00.0: irq 2294 for MSI/MSI-X
>[  702.715128] iwlagn 0000:02:00.0: firmware: requesting iwlwifi-5000-1.ucode
>[  704.943480] ohci1394: fw-host0: Waking dma ctx=0 ... processing is probably too slow
>[  704.978858] Registered led device: iwl-phy0:radio
>[  704.980638] Registered led device: iwl-phy0:assoc
>[  704.980662] Registered led device: iwl-phy0:RX
>[  704.980676] Registered led device: iwl-phy0:TX
>[  705.009963] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[  708.661578] wlan0: direct probe to AP 00:02:cf:93:bc:92 try 1
>[  708.860022] wlan0: direct probe to AP 00:02:cf:93:bc:92 try 2
>[  709.060045] wlan0: direct probe to AP 00:02:cf:93:bc:92 try 3
>[  709.264036] wlan0: direct probe to AP 00:02:cf:93:bc:92 timed out
>[  715.483769] wlan0: authenticate with AP 00:1f:9f:6b:05:41
>[  715.485706] wlan0: authenticated
>[  715.485712] wlan0: associate with AP 00:1f:9f:6b:05:41
>[  715.488408] wlan0: RX AssocResp from 00:1f:9f:6b:05:41 (capab=0x411 status=0 aid=2)
>[  715.488413] wlan0: associated
>[  715.493867] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[  726.348021] wlan0: no IPv6 routers present
>[  767.646972] wlan0 direct probe responded
>[  767.646984] wlan0: authenticate with AP 00:1f:9f:6b:05:41
>[  767.648770] wlan0: authenticated
>[  767.648777] wlan0: associate with AP 00:1f:9f:6b:05:41
>[  767.651383] wlan0: RX ReassocResp from 00:1f:9f:6b:05:41 (capab=0x411 status=0 aid=2)
>[  767.651389] wlan0: associated
>[  777.688405] wlan0: disassociating by local choice (reason=3)
>[  777.697025] iwlagn: index 0 not used in uCode key table.
>[  777.723137] wlan0: direct probe to AP 00:1f:9f:6b:05:41 try 1
>[  777.726698] wlan0: direct probe to AP 00:1f:9f:6b:05:41 try 1
>[  777.730437] wlan0 direct probe responded
>[  777.730445] wlan0: authenticate with AP 00:1f:9f:6b:05:41
>[  777.735131] wlan0: authenticated
>[  777.735138] wlan0: associate with AP 00:1f:9f:6b:05:41
>[  777.737840] wlan0: RX ReassocResp from 00:1f:9f:6b:05:41 (capab=0x411 status=0 aid=2)
>[  777.737846] wlan0: associated
>[ 1293.102786] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>[ 1293.105242] input: Bluetooth Laser Travel Mouse as /devices/pci0000:00/0000:00:1a.2/usb3/3-1/3-1:1.0/bluetooth/hci0/hci0:11/input10
>[ 1293.137125] generic-bluetooth 0005:046D:B008.0003: input,hidraw2: BLUETOOTH HID v3.13 Mouse [Bluetooth Laser Travel Mouse] on 00:22:43:C7:8F:AD
>[ 1823.722864] ohci1394: fw-host0: Waking dma ctx=0 ... processing is probably too slow
>[ 1823.805983] iwlagn 0000:02:00.0: PCI INT A disabled
>[ 1823.809770] wlan0: disassociating by local choice (reason=3)
>[ 1826.867784] PM: Syncing filesystems ... done.
>[ 1826.989868] PM: Preparing system for mem sleep
>[ 1826.989872] Freezing user space processes ... (elapsed 0.00 seconds) done.
>[ 1826.996019] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[ 1827.012013] PM: Entering mem sleep
>[ 1827.012031] Suspending console(s) (use no_console_suspend to debug)
>[ 1827.045130] btusb_intr_complete: hci0 urb ffff8800bb846d80 failed to resubmit (2)
>[ 1827.046127] btusb_bulk_complete: hci0 urb ffff88009cc2fb40 failed to resubmit (2)
>[ 1827.046130] btusb_bulk_complete: hci0 urb ffff88009cc2f3c0 failed to resubmit (2)
>[ 1828.089718] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[ 1828.089818] sd 0:0:0:0: [sda] Stopping disk
>[ 1828.581552] pciehp 0000:00:1c.2:pcie02: pciehp_suspend ENTRY
>[ 1828.581866] r8169 0000:08:00.0: PME# enabled
>[ 1828.581872] r8169 0000:08:00.0: wake-up capability enabled by ACPI
>[ 1828.596010] ieee1394: hpsb_bus_reset called while bus reset already in progress
>[ 1828.596096] ACPI handle has no context!
>[ 1828.692145] ehci_hcd 0000:00:1d.7: PCI INT A disabled
>[ 1828.708054] uhci_hcd 0000:00:1d.2: PCI INT C disabled
>[ 1828.708103] uhci_hcd 0000:00:1d.1: PCI INT B disabled
>[ 1828.708152] uhci_hcd 0000:00:1d.0: PCI INT A disabled
>[ 1828.708305] pciehp 0000:00:1c.2:pcie02: pciehp_suspend ENTRY
>[ 1828.740025] HDA Intel 0000:00:1b.0: PCI INT A disabled
>[ 1828.756065] ehci_hcd 0000:00:1a.7: PCI INT C disabled
>[ 1828.772054] uhci_hcd 0000:00:1a.2: PCI INT D disabled
>[ 1828.772104] uhci_hcd 0000:00:1a.1: PCI INT B disabled
>[ 1828.772154] uhci_hcd 0000:00:1a.0: PCI INT A disabled
>[ 1828.772235] PM: suspend devices took 1.764 seconds
>[ 1828.772677] ACPI: Preparing to enter system sleep state S3
>[ 1828.778412] Disabling non-boot CPUs ...
>[ 1828.780737] CPU 1 is now offline
>[ 1828.780739] SMP alternatives: switching to UP code
>[ 1828.909120] CPU0 attaching NULL sched-domain.
>[ 1828.909123] CPU1 attaching NULL sched-domain.
>[ 1828.920194] CPU0 attaching NULL sched-domain.
>[ 1828.920369] CPU1 is down
>[ 1828.920449] Extended CMOS year: 2000
>[ 1828.920449] Back to C!
>[ 1828.920449] Extended CMOS year: 2000
>[ 1828.920449] Enabling non-boot CPUs ...
>[ 1828.920449] SMP alternatives: switching to SMP code
>[ 1829.052388] Booting processor 1 APIC 0x1 ip 0x6000
>[ 1828.908991] Initializing CPU#1
>[ 1828.908991] Calibrating delay using timer specific routine.. 3990.13 BogoMIPS (lpj=7980265)
>[ 1828.908991] CPU: L1 I cache: 32K, L1 D cache: 32K
>[ 1828.908991] CPU: L2 cache: 3072K
>[ 1828.908991] CPU: Physical Processor ID: 0
>[ 1828.908991] CPU: Processor Core ID: 1
>[ 1829.140639] CPU1: Intel(R) Core(TM)2 Duo CPU     P7350  @ 2.00GHz stepping 06
>[ 1829.140661] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>[ 1829.160713] CPU0 attaching NULL sched-domain.
>[ 1829.164009] Switched to high resolution mode on CPU 1
>[ 1829.172010] CPU0 attaching sched-domain:
>[ 1829.172012]  domain 0: span 0-1 level MC
>[ 1829.172014]   groups: 0 1
>[ 1829.172017] CPU1 attaching sched-domain:
>[ 1829.172018]  domain 0: span 0-1 level MC
>[ 1829.172019]   groups: 1 0
>[ 1829.172465] CPU1 is up
>[ 1829.172467] ACPI: Waking up from system sleep state S3
>[ 1829.297645] ACPI: EC: non-query interrupt received, switching to interrupt mode
>[ 1829.352869] pci 0000:00:02.0: restoring config space at offset 0x8 (was 0x1, writing 0xcc01)
>[ 1829.352876] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900403)
>[ 1829.355906] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[ 1829.355913] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[ 1829.355973] usb usb1: root hub lost power or was reset
>[ 1829.355991] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>[ 1829.355996] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[ 1829.356068] usb usb2: root hub lost power or was reset
>[ 1829.356096] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>[ 1829.356101] uhci_hcd 0000:00:1a.2: setting latency timer to 64
>[ 1829.356160] usb usb3: root hub lost power or was reset
>[ 1829.368011] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>[ 1829.368016] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[ 1829.384044] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
>[ 1829.384051] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
>[ 1829.384070] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[ 1829.384076] HDA Intel 0000:00:1b.0: setting latency timer to 64
>[ 1829.489210] pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x20100, writing 0x2010a)
>[ 1829.489227] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0)
>[ 1829.489236] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
>[ 1829.489246] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100504)
>[ 1829.489292] pcieport-driver 0000:00:1c.0: setting latency timer to 64
>[ 1829.489311] pcieport-driver 0000:00:1c.1: restoring config space at offset 0xf (was 0x20200, writing 0x20205)
>[ 1829.489329] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0)
>[ 1829.489338] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
>[ 1829.489344] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100106, writing 0x100506)
>[ 1829.489389] pcieport-driver 0000:00:1c.1: setting latency timer to 64
>[ 1829.489405] pcieport-driver 0000:00:1c.2: restoring config space at offset 0xf (was 0x20300, writing 0x20306)
>[ 1829.489424] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x7 (was 0x2000d0d0, writing 0xd0d0)
>[ 1829.489434] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
>[ 1829.489441] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
>[ 1829.489485] pcieport-driver 0000:00:1c.2: setting latency timer to 64
>[ 1829.489493] pciehp 0000:00:1c.2:pcie02: pciehp_resume ENTRY
>[ 1829.489507] pcieport-driver 0000:00:1c.3: restoring config space at offset 0xf (was 0x20400, writing 0x20403)
>[ 1829.489524] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0)
>[ 1829.489537] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
>[ 1829.489543] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100104, writing 0x100504)
>[ 1829.489588] pcieport-driver 0000:00:1c.3: setting latency timer to 64
>[ 1829.489605] pcieport-driver 0000:00:1c.4: restoring config space at offset 0xf (was 0x20100, writing 0x2010a)
>[ 1829.489623] pcieport-driver 0000:00:1c.4: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0)
>[ 1829.489633] pcieport-driver 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
>[ 1829.489639] pcieport-driver 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100104, writing 0x100504)
>[ 1829.489679] pcieport-driver 0000:00:1c.4: setting latency timer to 64
>[ 1829.489696] pcieport-driver 0000:00:1c.5: restoring config space at offset 0xf (was 0x20200, writing 0x20205)
>[ 1829.489716] pcieport-driver 0000:00:1c.5: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
>[ 1829.489723] pcieport-driver 0000:00:1c.5: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
>[ 1829.489763] pcieport-driver 0000:00:1c.5: setting latency timer to 64
>[ 1829.489771] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>[ 1829.489776] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[ 1829.489835] usb usb4: root hub lost power or was reset
>[ 1829.489861] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>[ 1829.489865] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[ 1829.489923] usb usb5: root hub lost power or was reset
>[ 1829.489940] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>[ 1829.489944] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[ 1829.490003] usb usb6: root hub lost power or was reset
>[ 1829.504007] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>[ 1829.504012] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[ 1829.504107] pci 0000:00:1e.0: setting latency timer to 64
>[ 1829.520042] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
>[ 1829.520082] ahci 0000:00:1f.2: setting latency timer to 64
>[ 1829.536038] pci 0000:03:00.0: restoring config space at offset 0xf (was 0xff, writing 0x300ff)
>[ 1829.536055] pci 0000:03:00.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
>[ 1829.536062] pci 0000:03:00.0: restoring config space at offset 0x8 (was 0x0, writing 0xfea0fea0)
>[ 1829.536068] pci 0000:03:00.0: restoring config space at offset 0x7 (was 0x2a00101, writing 0x22a001f1)
>[ 1829.536074] pci 0000:03:00.0: restoring config space at offset 0x6 (was 0x0, writing 0x40040403)
>[ 1829.536085] pci 0000:03:00.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10008)
>[ 1829.536093] pci 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100116)
>[ 1829.536134] pci 0000:03:00.0: setting latency timer to 64
>[ 1829.552018] ohci1394 0000:04:00.0: restoring config space at offset 0xf (was 0x4020100, writing 0x4020106)
>[ 1829.552047] ohci1394 0000:04:00.0: restoring config space at offset 0x5 (was 0x0, writing 0xfeaf8000)
>[ 1829.552053] ohci1394 0000:04:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xfeaff800)
>[ 1829.552060] ohci1394 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x4008)
>[ 1829.552069] ohci1394 0000:04:00.0: restoring config space at offset 0x1 (was 0x2300000, writing 0x2300016)
>[ 1829.601718] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]  MMIO=[feaff800-feafffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>[ 1829.616086] r8169 0000:08:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x105)
>[ 1829.616113] r8169 0000:08:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfebf0000)
>[ 1829.616146] r8169 0000:08:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xfcfe000c)
>[ 1829.616166] r8169 0000:08:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xfcfff00c)
>[ 1829.616186] r8169 0000:08:00.0: restoring config space at offset 0x4 (was 0x1, writing 0xe801)
>[ 1829.616200] r8169 0000:08:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
>[ 1829.616220] r8169 0000:08:00.0: restoring config space at offset 0x1 (was 0x100001, writing 0x100407)
>[ 1829.616383] r8169 0000:08:00.0: wake-up capability disabled by ACPI
>[ 1829.616396] r8169 0000:08:00.0: PME# disabled
>[ 1829.616428] pciehp 0000:00:1c.2:pcie02: pciehp_resume ENTRY
>[ 1829.616510] sd 0:0:0:0: [sda] Starting disk
>[ 1829.840019] ata6: SATA link down (SStatus 0 SControl 300)
>[ 1829.840044] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[ 1829.844673] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
>[ 1829.844675] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>[ 1829.854254] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
>[ 1829.854256] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>[ 1829.858015] ata2.00: configured for UDMA/133
>[ 1831.464024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[ 1831.465621] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>[ 1831.467686] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
>[ 1831.467688] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>[ 1831.470610] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>[ 1831.470856] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
>[ 1831.470857] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>[ 1831.471940] ata1.00: configured for UDMA/133
>[ 1831.484044] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
>[ 1831.484061] sd 0:0:0:0: [sda] Write Protect is off
>[ 1831.484063] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[ 1831.484084] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[ 1832.448008] usb 3-1: reset full speed USB device using uhci_hcd and address 2
>[ 1832.868007] usb 4-2: reset low speed USB device using uhci_hcd and address 2
>[ 1833.276030] pci 0000:00:02.0: setting latency timer to 64
>[ 1833.278191] PM: resume devices took 3.980 seconds
>[ 1833.278335] PM: Finishing wakeup.
>[ 1833.278337] Restarting tasks ... <6>Core dump to |/usr/share/apport/apport pipe failed
>[ 1833.346237] hub 3-0:1.0: over-current change on port 2
>[ 1833.346553] done.
>[ 1833.580023] usb 3-2: reset full speed USB device using uhci_hcd and address 3
>[ 1833.727000] hub 7-0:1.0: over-current change on port 4
>[ 1833.828018] hub 7-0:1.0: over-current change on port 6
>[ 1833.932032] hub 2-0:1.0: over-current change on port 2
>[ 1834.463976] r8169: eth0: link down
>[ 1834.464650] ADDRCONF(NETDEV_UP): eth0: link is not ready
>[ 1834.465949] iwlagn 0000:02:00.0: enabling device (0000 -> 0002)
>[ 1834.465958] iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[ 1834.465997] iwlagn 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105)
>[ 1834.466042] iwlagn 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfdffe004)
>[ 1834.466057] iwlagn 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
>[ 1834.466095] iwlagn 0000:02:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006)
>[ 1834.466210] iwlagn 0000:02:00.0: irq 2294 for MSI/MSI-X
>[ 1834.503186] Registered led device: iwl-phy0:radio
>[ 1834.503231] Registered led device: iwl-phy0:assoc
>[ 1834.503269] Registered led device: iwl-phy0:RX
>[ 1834.503304] Registered led device: iwl-phy0:TX
>[ 1834.531483] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[ 1834.537028] wlan0: direct probe to AP 00:02:cf:93:bc:92 try 1
>[ 1834.537900] wlan0: direct probe to AP 00:02:cf:93:bc:92 try 1
>[ 1834.736024] wlan0: direct probe to AP 00:02:cf:93:bc:92 try 2
>[ 1834.936008] wlan0: direct probe to AP 00:02:cf:93:bc:92 try 3
>[ 1835.136018] wlan0: direct probe to AP 00:02:cf:93:bc:92 timed out
>[ 1843.919181] wlan0: authenticate with AP 00:1f:9f:6b:05:41
>[ 1843.921114] wlan0: authenticated
>[ 1843.921122] wlan0: associate with AP 00:1f:9f:6b:05:41
>[ 1843.923736] wlan0: RX AssocResp from 00:1f:9f:6b:05:41 (capab=0x411 status=0 aid=2)
>[ 1843.923741] wlan0: associated
>[ 1843.927472] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[ 1854.392017] wlan0: no IPv6 routers present
>[ 1856.912728] wlan0 direct probe responded
>[ 1856.912738] wlan0: authenticate with AP 00:1f:9f:6b:05:41
>[ 1856.914519] wlan0: authenticated
>[ 1856.914525] wlan0: associate with AP 00:1f:9f:6b:05:41
>[ 1856.917378] wlan0: RX ReassocResp from 00:1f:9f:6b:05:41 (capab=0x411 status=0 aid=2)
>[ 1856.917383] wlan0: associated
>[ 1867.012642] wlan0: disassociating by local choice (reason=3)
>[ 1867.025047] iwlagn: index 0 not used in uCode key table.
>[ 1867.061966] wlan0: direct probe to AP 00:1f:9f:6b:05:41 try 1
>[ 1867.066055] wlan0: direct probe to AP 00:1f:9f:6b:05:41 try 1
>[ 1867.066110] wlan0 direct probe responded
>[ 1867.066117] wlan0: authenticate with AP 00:1f:9f:6b:05:41
>[ 1867.072348] wlan0: authenticated
>[ 1867.072356] wlan0: associate with AP 00:1f:9f:6b:05:41
>[ 1867.074982] wlan0: RX ReassocResp from 00:1f:9f:6b:05:41 (capab=0x411 status=0 aid=2)
>[ 1867.074988] wlan0: associated

Actions: View

Attachments on bug 19731: 22303 | 22359 | 22360 | 23078 | 23998

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.