Attachment 29647 Details for Bug 23712 – kernel log with highmem disabled

kernel log with highmem disabled

oops (text/plain), 52.64 KB, created by Peter Sääf on 2009-09-17 11:35:22 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Peter Sääf

Created: 2009-09-17 11:35:22 UTC

Size: 52.64 KB

patch

obsolete

>Sep 17 18:19:54 [kernel] Linux version 2.6.31-rc8-ge3ac207 (root@darwin) (gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #39 SMP PREEMPT Thu Sep 17 18:18:39 CEST 2009
>Sep 17 18:19:54 [kernel] KERNEL supported cpus:
>Sep 17 18:19:54 [kernel]   Intel GenuineIntel
>Sep 17 18:19:54 [kernel]   AMD AuthenticAMD
>Sep 17 18:19:54 [kernel]   NSC Geode by NSC
>Sep 17 18:19:54 [kernel]   Cyrix CyrixInstead
>Sep 17 18:19:54 [kernel]   Centaur CentaurHauls
>Sep 17 18:19:54 [kernel]   Transmeta GenuineTMx86
>Sep 17 18:19:54 [kernel]   Transmeta TransmetaCPU
>Sep 17 18:19:54 [kernel]   UMC UMC UMC UMC
>Sep 17 18:19:54 [kernel] BIOS-provided physical RAM map:
>Sep 17 18:19:54 [kernel]  BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
>Sep 17 18:19:54 [kernel]  BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
>Sep 17 18:19:54 [kernel]  BIOS-e820: 00000000000e5000 - 0000000000100000 (reserved)
>Sep 17 18:19:54 [kernel]  BIOS-e820: 0000000000100000 - 000000007ff40000 (usable)
>Sep 17 18:19:54 [kernel]  BIOS-e820: 000000007ff40000 - 000000007ff4e000 (ACPI data)
>Sep 17 18:19:54 [kernel]  BIOS-e820: 000000007ff4e000 - 000000007ffe0000 (ACPI NVS)
>Sep 17 18:19:54 [kernel]  BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
>Sep 17 18:19:54 [kernel]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>Sep 17 18:19:54 [kernel]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
>Sep 17 18:19:54 [kernel] DMI 2.4 present.
>Sep 17 18:19:54 [kernel] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
>Sep 17 18:19:54 [kernel] last_pfn = 0x7ff40 max_arch_pfn = 0x100000
>Sep 17 18:19:54 [kernel] Warning only 895MB will be used.
>Sep 17 18:19:54 [kernel] Use a HIGHMEM enabled kernel.
>Sep 17 18:19:54 [kernel] init_memory_mapping: 0000000000000000-0000000037f1d000
>Sep 17 18:19:54 [kernel] ACPI: RSDP 000faff0 00024 (v02 ACPIAM)
>Sep 17 18:19:54 [kernel] ACPI: XSDT 7ff40100 00054 (v01 A_M_I_ OEMXSDT  12000810 MSFT 00000097)
>Sep 17 18:19:54 [acpid] starting up with proc fs_
>Sep 17 18:19:54 [kernel] ACPI: DSDT 7ff40440 09516 (v01  A0963 A0963031 00000031 INTL 20060113)
>Sep 17 18:19:54 [kernel] ACPI: FACS 7ff4e000 00040
>Sep 17 18:19:54 [kernel] ACPI: APIC 7ff40390 0006C (v01 A_M_I_ OEMAPIC  12000810 MSFT 00000097)
>Sep 17 18:19:54 [kernel] ACPI: MCFG 7ff40400 0003C (v01 A_M_I_ OEMMCFG  12000810 MSFT 00000097)
>Sep 17 18:19:54 [kernel] ACPI: OEMB 7ff4e040 00081 (v01 A_M_I_ AMI_OEM  12000810 MSFT 00000097)
>Sep 17 18:19:54 [kernel] ACPI: HPET 7ff49960 00038 (v01 A_M_I_ OEMHPET  12000810 MSFT 00000097)
>Sep 17 18:19:54 [kernel] ACPI: OSFR 7ff499a0 000B0 (v01 A_M_I_ OEMOSFR  12000810 MSFT 00000097)
>Sep 17 18:19:54 [kernel] 895MB LOWMEM available.
>Sep 17 18:19:54 [kernel]   mapped low ram: 0 - 37f1d000
>Sep 17 18:19:54 [kernel]   low ram: 0 - 37f1d000
>Sep 17 18:19:54 [kernel]   node 0 low ram: 00000000 - 37f1d000
>Sep 17 18:19:54 [kernel]   node 0 bootmap 00011000 - 00017fe4
>Sep 17 18:19:54 [kernel] (8 early reservations) ==> bootmem [0000000000 - 0037f1d000]
>Sep 17 18:19:54 [kernel]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>Sep 17 18:19:54 [kernel]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>Sep 17 18:19:54 [kernel]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>Sep 17 18:19:54 [kernel]   #3 [0001000000 - 00015167bc]    TEXT DATA BSS ==> [0001000000 - 00015167bc]
>Sep 17 18:19:54 [kernel]   #4 [000009ec00 - 0000100000]    BIOS reserved ==> [000009ec00 - 0000100000]
>Sep 17 18:19:54 [kernel]   #5 [0001517000 - 000151d234]              BRK ==> [0001517000 - 000151d234]
>Sep 17 18:19:54 [kernel]   #6 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
>Sep 17 18:19:54 [kernel]   #7 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
>Sep 17 18:19:54 [kernel] found SMP MP-table at [c00ff780] ff780
>Sep 17 18:19:54 [kernel] Zone PFN ranges:
>Sep 17 18:19:54 [kernel]   DMA      0x00000010 -> 0x00001000
>Sep 17 18:19:54 [kernel]   Normal   0x00001000 -> 0x00037f1d
>Sep 17 18:19:54 [kernel] Movable zone start PFN for each node
>Sep 17 18:19:54 [kernel] early_node_map[2] active PFN ranges
>Sep 17 18:19:54 [kernel]     0: 0x00000010 -> 0x0000009e
>Sep 17 18:19:54 [kernel]     0: 0x00000100 -> 0x00037f1d
>Sep 17 18:19:54 [kernel] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Sep 17 18:19:54 [kernel] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Sep 17 18:19:54 [kernel] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
>Sep 17 18:19:54 [kernel] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>Sep 17 18:19:54 [kernel] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>Sep 17 18:19:54 [kernel] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
>Sep 17 18:19:54 [kernel] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>Sep 17 18:19:54 [kernel] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>Sep 17 18:19:54 [kernel] Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Sep 17 18:19:54 [kernel] Using ACPI (MADT) for SMP configuration information
>Sep 17 18:19:54 [kernel] ACPI: HPET id: 0x8086a301 base: 0xfed00000
>Sep 17 18:19:54 [kernel] SMP: Allowing 4 CPUs, 0 hotplug CPUs
>Sep 17 18:19:54 [kernel] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
>Sep 17 18:19:54 [kernel] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
>Sep 17 18:19:54 [kernel] PERCPU: Embedded 11 pages at c1c22000, static data 22748 bytes
>Sep 17 18:19:54 [kernel] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 227244
>Sep 17 18:19:54 [kernel] Kernel command line: root=/dev/md3
>Sep 17 18:19:54 [kernel] PID hash table entries: 4096 (order: 12, 16384 bytes)
>Sep 17 18:19:54 [kernel] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Sep 17 18:19:54 [kernel] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Sep 17 18:19:54 [kernel] Enabling fast FPU save and restore... done.
>Sep 17 18:19:54 [kernel] Enabling unmasked SIMD FPU exception support... done.
>Sep 17 18:19:54 [kernel] Initializing CPU#0
>Sep 17 18:19:54 [kernel] Memory: 902580k/916596k available (3284k kernel code, 13392k reserved, 1155k data, 360k init, 0k highmem)
>Sep 17 18:19:54 [kernel] virtual kernel memory layout:
>Sep 17 18:19:54 [kernel]     fixmap  : 0xfff1f000 - 0xfffff000   ( 896 kB)
>Sep 17 18:19:54 [kernel]     vmalloc : 0xf871d000 - 0xfff1d000   ( 120 MB)
>Sep 17 18:19:54 [kernel]     lowmem  : 0xc0000000 - 0xf7f1d000   ( 895 MB)
>Sep 17 18:19:54 [kernel]       .init : 0xc1456000 - 0xc14b0000   ( 360 kB)
>Sep 17 18:19:54 [kernel]       .data : 0xc1335263 - 0xc1455e80   (1155 kB)
>Sep 17 18:19:54 [kernel]       .text : 0xc1000000 - 0xc1335263   (3284 kB)
>Sep 17 18:19:54 [kernel] Checking if this processor honours the WP bit even in supervisor mode...Ok.
>Sep 17 18:19:54 [kernel] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>Sep 17 18:19:54 [kernel] NR_IRQS:512
>Sep 17 18:19:54 [kernel] Extended CMOS year: 2000
>Sep 17 18:19:54 [kernel] Fast TSC calibration using PIT
>Sep 17 18:19:54 [kernel] Detected 2671.490 MHz processor.
>Sep 17 18:19:54 [kernel] Console: colour VGA+ 80x25
>Sep 17 18:19:54 [kernel] console [tty0] enabled
>Sep 17 18:19:54 [kernel] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
>Sep 17 18:19:54 [kernel] Calibrating delay loop (skipped), value calculated using timer frequency.. 5342.98 BogoMIPS (lpj=2671490)
>Sep 17 18:19:54 [kernel] Mount-cache hash table entries: 512
>Sep 17 18:19:54 [kernel] CPU: L1 I cache: 32K, L1 D cache: 32K
>Sep 17 18:19:54 [kernel] CPU: L2 cache: 6144K
>Sep 17 18:19:54 [kernel] CPU: Physical Processor ID: 0
>Sep 17 18:19:54 [kernel] CPU: Processor Core ID: 0
>Sep 17 18:19:54 [kernel] mce: CPU supports 6 MCE banks
>Sep 17 18:19:54 [kernel] CPU0: Thermal monitoring enabled (TM2)
>Sep 17 18:19:54 [kernel] using mwait in idle threads.
>Sep 17 18:19:54 [kernel] Checking 'hlt' instruction... OK.
>Sep 17 18:19:54 [kernel] Freeing SMP alternatives: 14k freed
>Sep 17 18:19:54 [kernel] ACPI: Core revision 20090521
>Sep 17 18:19:54 [kernel] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>Sep 17 18:19:54 [kernel] CPU0: Intel(R) Core(TM)2 Quad  CPU   Q9450  @ 2.66GHz stepping 07
>Sep 17 18:19:54 [kernel] Booting processor 1 APIC 0x1 ip 0x6000
>Sep 17 18:19:54 [kernel] Initializing CPU#1
>Sep 17 18:19:54 [kernel] Calibrating delay using timer specific routine.. 5343.00 BogoMIPS (lpj=2671504)
>Sep 17 18:19:54 [kernel] CPU: L1 I cache: 32K, L1 D cache: 32K
>Sep 17 18:19:54 [kernel] CPU: L2 cache: 6144K
>Sep 17 18:19:54 [kernel] CPU: Physical Processor ID: 0
>Sep 17 18:19:54 [kernel] CPU: Processor Core ID: 1
>Sep 17 18:19:54 [kernel] mce: CPU supports 6 MCE banks
>Sep 17 18:19:54 [kernel] CPU1: Thermal monitoring enabled (TM2)
>Sep 17 18:19:54 [kernel] CPU1: Intel(R) Core(TM)2 Quad  CPU   Q9450  @ 2.66GHz stepping 07
>Sep 17 18:19:54 [kernel] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Sep 17 18:19:54 [kernel] Booting processor 2 APIC 0x2 ip 0x6000
>Sep 17 18:19:54 [kernel] Initializing CPU#2
>Sep 17 18:19:54 [kernel] Calibrating delay using timer specific routine.. 5343.02 BogoMIPS (lpj=2671513)
>Sep 17 18:19:54 [kernel] CPU: L1 I cache: 32K, L1 D cache: 32K
>Sep 17 18:19:54 [kernel] CPU: L2 cache: 6144K
>Sep 17 18:19:54 [kernel] CPU: Physical Processor ID: 0
>Sep 17 18:19:54 [kernel] CPU: Processor Core ID: 2
>Sep 17 18:19:54 [kernel] mce: CPU supports 6 MCE banks
>Sep 17 18:19:54 [kernel] CPU2: Thermal monitoring enabled (TM2)
>Sep 17 18:19:54 [kernel] CPU2: Intel(R) Core(TM)2 Quad  CPU   Q9450  @ 2.66GHz stepping 07
>Sep 17 18:19:54 [kernel] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
>Sep 17 18:19:54 [kernel] Booting processor 3 APIC 0x3 ip 0x6000
>Sep 17 18:19:54 [kernel] Initializing CPU#3
>Sep 17 18:19:54 [kernel] Calibrating delay using timer specific routine.. 5343.02 BogoMIPS (lpj=2671514)
>Sep 17 18:19:54 [kernel] CPU: L2 cache: 6144K
>Sep 17 18:19:54 [kernel] CPU: Processor Core ID: 3
>Sep 17 18:19:54 [kernel] mce: CPU supports 6 MCE banks
>Sep 17 18:19:54 [kernel] CPU3: Thermal monitoring enabled (TM2)
>Sep 17 18:19:54 [kernel] CPU3: Intel(R) Core(TM)2 Quad  CPU   Q9450  @ 2.66GHz stepping 07
>Sep 17 18:19:54 [kernel] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
>Sep 17 18:19:54 [kernel] Brought up 4 CPUs
>Sep 17 18:19:54 [kernel] Total of 4 processors activated (21372.04 BogoMIPS).
>Sep 17 18:19:54 [kernel] NET: Registered protocol family 16
>Sep 17 18:19:54 [kernel] ACPI: bus type pci registered
>Sep 17 18:19:54 [kernel] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>Sep 17 18:19:54 [kernel] PCI: Not using MMCONFIG.
>Sep 17 18:19:54 [kernel] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=10
>Sep 17 18:19:54 [kernel] PCI: Using configuration type 1 for base access
>Sep 17 18:19:54 [kernel] bio: create slab <bio-0> at 0
>Sep 17 18:19:54 [kernel] ACPI: Interpreter enabled
>Sep 17 18:19:54 [kernel] ACPI: (supports S0 S5)
>Sep 17 18:19:54 [kernel] ACPI: Using IOAPIC for interrupt routing
>Sep 17 18:19:54 [kernel] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>Sep 17 18:19:54 [kernel] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
>Sep 17 18:19:54 [kernel] PCI: Using MMCONFIG for extended config space
>Sep 17 18:19:54 [kernel] ACPI: No dock devices found.
>Sep 17 18:19:54 [kernel] ACPI: PCI Root Bridge [PCI0] (0000:00)
>Sep 17 18:19:54 [kernel] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>Sep 17 18:19:54 [kernel] pci 0000:00:01.0: PME# disabled
>Sep 17 18:19:54 [kernel] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>Sep 17 18:19:54 [kernel] pci 0000:00:1a.7: PME# disabled
>Sep 17 18:19:54 [kernel] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>Sep 17 18:19:54 [kernel] pci 0000:00:1c.0: PME# disabled
>Sep 17 18:19:54 [kernel] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>Sep 17 18:19:54 [kernel] pci 0000:00:1c.4: PME# disabled
>Sep 17 18:19:54 [kernel] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
>Sep 17 18:19:54 [kernel] pci 0000:00:1c.5: PME# disabled
>Sep 17 18:19:54 [kernel] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>Sep 17 18:19:54 [kernel] pci 0000:00:1d.7: PME# disabled
>Sep 17 18:19:54 [kernel] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>Sep 17 18:19:54 [kernel] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
>Sep 17 18:19:54 [kernel] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
>Sep 17 18:19:54 [kernel] pci 0000:00:1f.2: PME# supported from D3hot
>Sep 17 18:19:54 [kernel] pci 0000:00:1f.2: PME# disabled
>Sep 17 18:19:54 [kernel] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
>Sep 17 18:19:54 [kernel] pci 0000:04:00.0: PME# disabled
>Sep 17 18:19:54 [kernel] pci 0000:05:01.0: PME# supported from D0 D3hot D3cold
>Sep 17 18:19:54 [kernel] pci 0000:05:01.0: PME# disabled
>Sep 17 18:19:54 [kernel] pci 0000:05:02.0: PME# supported from D0 D3hot D3cold
>Sep 17 18:19:54 [kernel] pci 0000:05:02.0: PME# disabled
>Sep 17 18:19:54 [kernel] pci 0000:05:03.0: PME# supported from D0 D3hot D3cold
>Sep 17 18:19:54 [kernel] pci 0000:05:03.0: PME# disabled
>Sep 17 18:19:54 [kernel] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
>Sep 17 18:19:54 [kernel] pci 0000:03:00.0: PME# disabled
>Sep 17 18:19:54 [kernel] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>Sep 17 18:19:54 [kernel] pci 0000:02:00.0: PME# disabled
>Sep 17 18:19:54 [kernel] pci 0000:0a:04.0: PME# supported from D0 D1 D2 D3hot D3cold
>Sep 17 18:19:54 [kernel] pci 0000:0a:04.0: PME# disabled
>Sep 17 18:19:54 [kernel] pci 0000:00:1e.0: transparent bridge
>Sep 17 18:19:54 [kernel] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>Sep 17 18:19:54 [kernel] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>Sep 17 18:19:54 [kernel] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>Sep 17 18:19:54 [kernel] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
>Sep 17 18:19:54 [kernel] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>Sep 17 18:19:54 [kernel] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
>Sep 17 18:19:54 [kernel] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
>Sep 17 18:19:54 [kernel] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>Sep 17 18:19:54 [kernel] SCSI subsystem initialized
>Sep 17 18:19:54 [kernel] usbcore: registered new interface driver usbfs
>Sep 17 18:19:54 [kernel] usbcore: registered new interface driver hub
>Sep 17 18:19:54 [kernel] usbcore: registered new device driver usb
>Sep 17 18:19:54 [kernel] PCI: Using ACPI for IRQ routing
>Sep 17 18:19:54 [kernel] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>Sep 17 18:19:54 [kernel] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
>Sep 17 18:19:54 [kernel] pnp: PnP ACPI init
>Sep 17 18:19:54 [kernel] ACPI: bus type pnp registered
>Sep 17 18:19:54 [kernel] pnp: PnP ACPI: found 15 devices
>Sep 17 18:19:54 [kernel] ACPI: ACPI bus type pnp unregistered
>Sep 17 18:19:54 [kernel] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
>Sep 17 18:19:54 [kernel] system 00:06: ioport range 0x290-0x297 has been reserved
>Sep 17 18:19:54 [kernel] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
>Sep 17 18:19:54 [kernel] system 00:07: ioport range 0x800-0x87f has been reserved
>Sep 17 18:19:54 [kernel] system 00:07: ioport range 0x480-0x4bf has been reserved
>Sep 17 18:19:54 [kernel] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
>Sep 17 18:19:54 [kernel] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
>Sep 17 18:19:54 [kernel] system 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved
>Sep 17 18:19:54 [kernel] system 00:07: iomem range 0xffa00000-0xffafffff has been reserved
>Sep 17 18:19:54 [kernel] system 00:07: iomem range 0xffb00000-0xffbfffff has been reserved
>Sep 17 18:19:54 [kernel] system 00:07: iomem range 0xffe00000-0xffefffff has been reserved
>Sep 17 18:19:54 [kernel] system 00:07: iomem range 0xfff00000-0xfffffffe has been reserved
>Sep 17 18:19:54 [kernel] system 00:0a: iomem range 0xffc00000-0xffdfffff has been reserved
>Sep 17 18:19:54 [kernel] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
>Sep 17 18:19:54 [kernel] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
>Sep 17 18:19:54 [kernel] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
>Sep 17 18:19:54 [kernel] system 00:0e: iomem range 0xc0000-0xcffff could not be reserved
>Sep 17 18:19:54 [kernel] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
>Sep 17 18:19:54 [kernel] system 00:0e: iomem range 0x100000-0x7fffffff could not be reserved
>Sep 17 18:19:54 [kernel] pci 0000:0a:04.0: BAR 6: address space collision on of device [0xfebc0000-0xfebdffff]
>Sep 17 18:19:54 [kernel] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>Sep 17 18:19:54 [kernel] pci 0000:00:01.0:   IO window: 0xa000-0xafff
>Sep 17 18:19:54 [kernel] pci 0000:00:01.0:   MEM window: 0xfa000000-0xfe7fffff
>Sep 17 18:19:54 [kernel] pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
>Sep 17 18:19:54 [kernel] pci 0000:08:00.0: PCI bridge, secondary bus 0000:09
>Sep 17 18:19:54 [kernel] pci 0000:08:00.0:   IO window: 0xd000-0xdfff
>Sep 17 18:19:54 [kernel] pci 0000:08:00.0:   MEM window: disabled
>Sep 17 18:19:54 [kernel] pci 0000:08:00.0:   PREFETCH window: disabled
>Sep 17 18:19:54 [kernel] pci 0000:05:01.0: PCI bridge, secondary bus 0000:08
>Sep 17 18:19:54 [kernel] pci 0000:05:01.0:   IO window: 0xd000-0xdfff
>Sep 17 18:19:54 [kernel] pci 0000:05:01.0:   MEM window: disabled
>Sep 17 18:19:54 [kernel] pci 0000:05:01.0:   PREFETCH window: disabled
>Sep 17 18:19:54 [kernel] pci 0000:05:02.0: PCI bridge, secondary bus 0000:07
>Sep 17 18:19:54 [kernel] pci 0000:05:02.0:   IO window: disabled
>Sep 17 18:19:54 [kernel] pci 0000:05:02.0:   MEM window: disabled
>Sep 17 18:19:54 [kernel] pci 0000:05:02.0:   PREFETCH window: 0x000000f8f00000-0x000000f8ffffff
>Sep 17 18:19:54 [kernel] pci 0000:05:03.0: PCI bridge, secondary bus 0000:06
>Sep 17 18:19:54 [kernel] pci 0000:05:03.0:   IO window: disabled
>Sep 17 18:19:54 [kernel] pci 0000:05:03.0:   MEM window: disabled
>Sep 17 18:19:54 [kernel] pci 0000:05:03.0:   PREFETCH window: 0x000000f8e00000-0x000000f8efffff
>Sep 17 18:19:54 [kernel] pci 0000:04:00.0: PCI bridge, secondary bus 0000:05
>Sep 17 18:19:54 [kernel] pci 0000:04:00.0:   IO window: 0xd000-0xdfff
>Sep 17 18:19:54 [kernel] pci 0000:04:00.0:   MEM window: disabled
>Sep 17 18:19:54 [kernel] pci 0000:04:00.0:   PREFETCH window: 0x000000f8e00000-0x000000f8ffffff
>Sep 17 18:19:54 [kernel] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
>Sep 17 18:19:54 [kernel] pci 0000:00:1c.0:   IO window: 0xd000-0xdfff
>Sep 17 18:19:54 [kernel] pci 0000:00:1c.0:   MEM window: 0xfea00000-0xfeafffff
>Sep 17 18:19:54 [kernel] pci 0000:00:1c.0:   PREFETCH window: 0x000000f8e00000-0x000000f8ffffff
>Sep 17 18:19:54 [kernel] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
>Sep 17 18:19:54 [kernel] pci 0000:00:1c.4:   IO window: 0xc000-0xcfff
>Sep 17 18:19:54 [kernel] pci 0000:00:1c.4:   MEM window: 0xfe900000-0xfe9fffff
>Sep 17 18:19:54 [kernel] pci 0000:00:1c.4:   PREFETCH window: disabled
>Sep 17 18:19:54 [kernel] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02
>Sep 17 18:19:54 [kernel] pci 0000:00:1c.5:   IO window: 0xb000-0xbfff
>Sep 17 18:19:54 [kernel] pci 0000:00:1c.5:   MEM window: 0xfe800000-0xfe8fffff
>Sep 17 18:19:54 [kernel] pci 0000:00:1c.5:   PREFETCH window: disabled
>Sep 17 18:19:54 [kernel] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a
>Sep 17 18:19:54 [kernel] pci 0000:00:1e.0:   IO window: 0xe000-0xefff
>Sep 17 18:19:54 [kernel] pci 0000:00:1e.0:   MEM window: 0xfeb00000-0xfebfffff
>Sep 17 18:19:54 [kernel] pci 0000:00:1e.0:   PREFETCH window: 0x80000000-0x800fffff
>Sep 17 18:19:54 [kernel] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>Sep 17 18:19:54 [kernel] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>Sep 17 18:19:54 [kernel] pci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>Sep 17 18:19:54 [kernel] pci 0000:05:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>Sep 17 18:19:54 [kernel] pci 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>Sep 17 18:19:54 [kernel] pci 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>Sep 17 18:19:54 [kernel] pci 0000:05:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>Sep 17 18:19:54 [kernel] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>Sep 17 18:19:54 [kernel] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
>Sep 17 18:19:54 [kernel] NET: Registered protocol family 2
>Sep 17 18:19:54 [kernel] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>Sep 17 18:19:54 [kernel] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>Sep 17 18:19:54 [kernel] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>Sep 17 18:19:54 [kernel] TCP: Hash tables configured (established 131072 bind 65536)
>Sep 17 18:19:54 [kernel] TCP reno registered
>Sep 17 18:19:54 [kernel] NET: Registered protocol family 1
>Sep 17 18:19:54 [kernel] microcode: CPU0 sig=0x10677, pf=0x10, revision=0x703
>Sep 17 18:19:54 [kernel] microcode: CPU1 sig=0x10677, pf=0x10, revision=0x703
>Sep 17 18:19:54 [kernel] microcode: CPU2 sig=0x10677, pf=0x10, revision=0x703
>Sep 17 18:19:54 [kernel] microcode: CPU3 sig=0x10677, pf=0x10, revision=0x703
>Sep 17 18:19:54 [kernel] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>Sep 17 18:19:54 [kernel] fuse init (API version 7.12)
>Sep 17 18:19:54 [kernel] msgmni has been set to 1763
>Sep 17 18:19:54 [kernel] alg: No test for stdrng (krng)
>Sep 17 18:19:54 [kernel] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>Sep 17 18:19:54 [kernel] io scheduler noop registered
>Sep 17 18:19:54 [kernel] io scheduler deadline registered (default)
>Sep 17 18:19:54 [kernel] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>Sep 17 18:19:54 [kernel] ACPI: Power Button [PWRF]
>Sep 17 18:19:54 [kernel] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>Sep 17 18:19:54 [kernel] ACPI: Power Button [PWRB]
>Sep 17 18:19:54 [kernel] ACPI: SSDT 7ff4e0d0 001D2 (v01    AMI   CPU1PM 00000001 INTL 20060113)
>Sep 17 18:19:54 [kernel] processor LNXCPU:00: registered as cooling_device0
>Sep 17 18:19:54 [kernel] ACPI: SSDT 7ff4e2b0 00143 (v01    AMI   CPU2PM 00000001 INTL 20060113)
>Sep 17 18:19:54 [kernel] processor LNXCPU:01: registered as cooling_device1
>Sep 17 18:19:54 [kernel] processor LNXCPU:02: registered as cooling_device2
>Sep 17 18:19:54 [kernel] ACPI: SSDT 7ff4e550 00143 (v01    AMI   CPU4PM 00000001 INTL 20060113)
>Sep 17 18:19:54 [kernel] processor LNXCPU:03: registered as cooling_device3
>Sep 17 18:19:54 [kernel] Real Time Clock Driver v1.12b
>Sep 17 18:19:54 [kernel] Linux agpgart interface v0.103
>Sep 17 18:19:54 [kernel] [drm] Initialized drm 1.1.0 20060810
>Sep 17 18:19:54 [kernel] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>Sep 17 18:19:54 [kernel] loop: module loaded
>Sep 17 18:19:54 [kernel] ahci 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
>Sep 17 18:19:54 [kernel] ahci: SSS flag set, parallel bus scan disabled
>Sep 17 18:19:54 [kernel] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
>Sep 17 18:19:54 [kernel] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems 
>Sep 17 18:19:54 [kernel] scsi0 : ahci
>Sep 17 18:19:54 [kernel] scsi1 : ahci
>Sep 17 18:19:54 [kernel] scsi2 : ahci
>Sep 17 18:19:54 [kernel] scsi3 : ahci
>Sep 17 18:19:54 [kernel] scsi4 : ahci
>Sep 17 18:19:54 [kernel] scsi5 : ahci
>Sep 17 18:19:54 [kernel] ata1: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffe900 irq 32
>Sep 17 18:19:54 [kernel] ata2: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffe980 irq 32
>Sep 17 18:19:54 [kernel] ata3: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffea00 irq 32
>Sep 17 18:19:54 [kernel] ata4: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffea80 irq 32
>Sep 17 18:19:54 [kernel] ata5: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffeb00 irq 32
>Sep 17 18:19:54 [kernel] ata6: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffeb80 irq 32
>Sep 17 18:19:54 [kernel] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>Sep 17 18:19:54 [kernel] ahci 0000:03:00.0: controller can't do NCQ, turning off CAP_NCQ
>Sep 17 18:19:54 [kernel] ahci 0000:03:00.0: controller can't do PMP, turning off CAP_PMP
>Sep 17 18:19:54 [kernel] ahci 0000:03:00.0: MV_AHCI HACK: port_map 1f -> f
>Sep 17 18:19:54 [kernel] ahci 0000:03:00.0: Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.
>Sep 17 18:19:54 [kernel] ahci: SSS flag set, parallel bus scan disabled
>Sep 17 18:19:54 [kernel] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 5 ports 3 Gbps 0xf impl IDE mode
>Sep 17 18:19:54 [kernel] ahci 0000:03:00.0: flags: 64bit stag slum part 
>Sep 17 18:19:54 [kernel] scsi6 : ahci
>Sep 17 18:19:54 [kernel] scsi7 : ahci
>Sep 17 18:19:54 [kernel] scsi8 : ahci
>Sep 17 18:19:54 [kernel] scsi9 : ahci
>Sep 17 18:19:54 [kernel] scsi10 : ahci
>Sep 17 18:19:54 [kernel] ata7: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd00 irq 16
>Sep 17 18:19:54 [kernel] ata8: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd80 irq 16
>Sep 17 18:19:54 [kernel] ata9: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe00 irq 16
>Sep 17 18:19:54 [kernel] ata10: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe80 irq 16
>Sep 17 18:19:54 [kernel] ata11: DUMMY
>Sep 17 18:19:54 [kernel] skge 0000:0a:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>Sep 17 18:19:54 [kernel] skge 1.13 addr 0xfebfc000 irq 19 chip Yukon-Lite rev 9
>Sep 17 18:19:54 [kernel] skge eth0: addr 00:1f:c6:5c:93:38
>Sep 17 18:19:54 [kernel] sky2 driver version 1.23
>Sep 17 18:19:54 [kernel] sky2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>Sep 17 18:19:54 [kernel] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 3
>Sep 17 18:19:54 [kernel] sky2 eth1: addr 00:1f:c6:5c:94:1f
>Sep 17 18:19:54 [kernel] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>Sep 17 18:19:54 [kernel] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>Sep 17 18:19:54 [kernel] ehci_hcd 0000:00:1a.7: EHCI Host Controller
>Sep 17 18:19:54 [kernel] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>Sep 17 18:19:54 [kernel] ehci_hcd 0000:00:1a.7: debug port 1
>Sep 17 18:19:54 [kernel] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
>Sep 17 18:19:54 [kernel] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>Sep 17 18:19:54 [kernel] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>Sep 17 18:19:54 [kernel] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>Sep 17 18:19:54 [kernel] usb usb1: Product: EHCI Host Controller
>Sep 17 18:19:54 [kernel] usb usb1: configuration #1 chosen from 1 choice
>Sep 17 18:19:54 [kernel] hub 1-0:1.0: USB hub found
>Sep 17 18:19:54 [kernel] hub 1-0:1.0: 6 ports detected
>Sep 17 18:19:54 [kernel] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>Sep 17 18:19:54 [kernel] ehci_hcd 0000:00:1d.7: EHCI Host Controller
>Sep 17 18:19:54 [kernel] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>Sep 17 18:19:54 [kernel] ehci_hcd 0000:00:1d.7: debug port 1
>Sep 17 18:19:54 [kernel] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
>Sep 17 18:19:54 [kernel] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>Sep 17 18:19:54 [kernel] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>Sep 17 18:19:54 [kernel] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>Sep 17 18:19:54 [kernel] usb usb2: Product: EHCI Host Controller
>Sep 17 18:19:54 [kernel] usb usb2: Manufacturer: Linux 2.6.31-rc8-ge3ac207 ehci_hcd
>Sep 17 18:19:54 [kernel] usb usb2: SerialNumber: 0000:00:1d.7
>Sep 17 18:19:54 [kernel] usb usb2: configuration #1 chosen from 1 choice
>Sep 17 18:19:54 [kernel] hub 2-0:1.0: USB hub found
>Sep 17 18:19:54 [kernel] hub 2-0:1.0: 6 ports detected
>Sep 17 18:19:54 [kernel] uhci_hcd: USB Universal Host Controller Interface driver
>Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1a.0: UHCI Host Controller
>Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1a.0: detected 2 ports
>Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800
>Sep 17 18:19:54 [kernel] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>Sep 17 18:19:54 [kernel] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>Sep 17 18:19:54 [kernel] usb usb3: Product: UHCI Host Controller
>Sep 17 18:19:54 [kernel] usb usb3: Manufacturer: Linux 2.6.31-rc8-ge3ac207 uhci_hcd
>Sep 17 18:19:54 [kernel] usb usb3: SerialNumber: 0000:00:1a.0
>Sep 17 18:19:54 [kernel] usb usb3: configuration #1 chosen from 1 choice
>Sep 17 18:19:54 [kernel] hub 3-0:1.0: USB hub found
>Sep 17 18:19:54 [kernel] hub 3-0:1.0: 2 ports detected
>Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1a.1: UHCI Host Controller
>Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1a.1: detected 2 ports
>Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
>Sep 17 18:19:54 [kernel] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>Sep 17 18:19:54 [kernel] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>Sep 17 18:19:54 [kernel] usb usb4: Product: UHCI Host Controller
>Sep 17 18:19:54 [kernel] usb usb4: Manufacturer: Linux 2.6.31-rc8-ge3ac207 uhci_hcd
>Sep 17 18:19:54 [kernel] usb usb4: SerialNumber: 0000:00:1a.1
>Sep 17 18:19:54 [kernel] usb usb4: configuration #1 chosen from 1 choice
>Sep 17 18:19:54 [kernel] hub 4-0:1.0: USB hub found
>Sep 17 18:19:54 [kernel] hub 4-0:1.0: 2 ports detected
>Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1a.2: UHCI Host Controller
>Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
>Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1a.2: detected 2 ports
>Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00009c00
>Sep 17 18:19:54 [kernel] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>Sep 17 18:19:54 [kernel] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>Sep 17 18:19:54 [kernel] usb usb5: Product: UHCI Host Controller
>Sep 17 18:19:54 [kernel] usb usb5: Manufacturer: Linux 2.6.31-rc8-ge3ac207 uhci_hcd
>Sep 17 18:19:54 [kernel] usb usb5: SerialNumber: 0000:00:1a.2
>Sep 17 18:19:54 [kernel] usb usb5: configuration #1 chosen from 1 choice
>Sep 17 18:19:54 [kernel] hub 5-0:1.0: USB hub found
>Sep 17 18:19:54 [kernel] hub 5-0:1.0: 2 ports detected
>Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
>Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1d.0: detected 2 ports
>Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080
>Sep 17 18:19:54 [kernel] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>Sep 17 18:19:54 [kernel] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>Sep 17 18:19:54 [kernel] usb usb6: Product: UHCI Host Controller
>Sep 17 18:19:54 [kernel] usb usb6: Manufacturer: Linux 2.6.31-rc8-ge3ac207 uhci_hcd
>Sep 17 18:19:54 [kernel] usb usb6: SerialNumber: 0000:00:1d.0
>Sep 17 18:19:54 [kernel] usb usb6: configuration #1 chosen from 1 choice
>Sep 17 18:19:54 [kernel] hub 6-0:1.0: USB hub found
>Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
>Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1d.1: detected 2 ports
>Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
>Sep 17 18:19:54 [kernel] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>Sep 17 18:19:54 [kernel] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>Sep 17 18:19:54 [kernel] usb usb7: Product: UHCI Host Controller
>Sep 17 18:19:54 [kernel] usb usb7: Manufacturer: Linux 2.6.31-rc8-ge3ac207 uhci_hcd
>Sep 17 18:19:54 [kernel] usb usb7: SerialNumber: 0000:00:1d.1
>Sep 17 18:19:54 [kernel] usb usb7: configuration #1 chosen from 1 choice
>Sep 17 18:19:54 [kernel] hub 7-0:1.0: USB hub found
>Sep 17 18:19:54 [kernel] hub 7-0:1.0: 2 ports detected
>Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
>Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1d.2: detected 2 ports
>Sep 17 18:19:54 [kernel] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480
>Sep 17 18:19:54 [kernel] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
>Sep 17 18:19:54 [kernel] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>Sep 17 18:19:54 [kernel] usb usb8: Product: UHCI Host Controller
>Sep 17 18:19:54 [kernel] usb usb8: Manufacturer: Linux 2.6.31-rc8-ge3ac207 uhci_hcd
>Sep 17 18:19:54 [kernel] usb usb8: SerialNumber: 0000:00:1d.2
>Sep 17 18:19:54 [kernel] usb usb8: configuration #1 chosen from 1 choice
>Sep 17 18:19:54 [kernel] hub 8-0:1.0: USB hub found
>Sep 17 18:19:54 [kernel] hub 8-0:1.0: 2 ports detected
>Sep 17 18:19:54 [kernel] Initializing USB Mass Storage driver...
>Sep 17 18:19:54 [kernel] usbcore: registered new interface driver usb-storage
>Sep 17 18:19:54 [kernel] USB Mass Storage support registered.
>Sep 17 18:19:54 [kernel] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>Sep 17 18:19:54 [kernel] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>Sep 17 18:19:54 [kernel] serio: i8042 KBD port at 0x60,0x64 irq 1
>Sep 17 18:19:54 [kernel] mice: PS/2 mouse device common for all mice
>Sep 17 18:19:54 [kernel] coretemp coretemp.0: Using relative temperature scale!
>Sep 17 18:19:54 [kernel] coretemp coretemp.1: Using relative temperature scale!
>Sep 17 18:19:54 [kernel] coretemp coretemp.2: Using relative temperature scale!
>Sep 17 18:19:54 [kernel] coretemp coretemp.3: Using relative temperature scale!
>Sep 17 18:19:54 [kernel] md: raid0 personality registered for level 0
>Sep 17 18:19:54 [kernel] md: raid1 personality registered for level 1
>Sep 17 18:19:54 [kernel] cpuidle: using governor ladder
>Sep 17 18:19:54 [kernel] usbcore: registered new interface driver usbhid
>Sep 17 18:19:54 [kernel] usbhid: v2.6:USB HID core driver
>Sep 17 18:19:54 [kernel] AV200 0000:09:04.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>Sep 17 18:19:54 [kernel] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>Sep 17 18:19:54 [kernel] ata1.00: ATA-8: WDC WD3000GLFS-01F8U0, 03.03V01, max UDMA/133
>Sep 17 18:19:54 [kernel] ata1.00: 586072368 sectors, multi 0: LBA48 NCQ (depth 31/32)
>Sep 17 18:19:54 [kernel] ata7: SATA link down (SStatus 0 SControl 300)
>Sep 17 18:19:54 [kernel] ata1.00: configured for UDMA/133
>Sep 17 18:19:54 [kernel] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3000GLFS-0 03.0 PQ: 0 ANSI: 5
>Sep 17 18:19:54 [kernel] sd 0:0:0:0: [sda] 586072368 512-byte logical blocks: (300 GB/279 GiB)
>Sep 17 18:19:54 [kernel] sd 0:0:0:0: Attached scsi generic sg0 type 0
>Sep 17 18:19:54 [kernel] sd 0:0:0:0: [sda] Write Protect is off
>Sep 17 18:19:54 [kernel] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Sep 17 18:19:54 [kernel]  sda:
>Sep 17 18:19:54 [kernel]  sda1 sda2 sda3
>Sep 17 18:19:54 [kernel] sd 0:0:0:0: [sda] Attached SCSI disk
>Sep 17 18:19:54 [kernel] usb 2-2: new high speed USB device using ehci_hcd and address 3
>Sep 17 18:19:54 [kernel] usb 2-2: New USB device found, idVendor=0424, idProduct=2504
>Sep 17 18:19:54 [kernel] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>Sep 17 18:19:54 [kernel] usb 2-2: configuration #1 chosen from 1 choice
>Sep 17 18:19:54 [kernel] hub 2-2:1.0: USB hub found
>Sep 17 18:19:54 [kernel] hub 2-2:1.0: 4 ports detected
>Sep 17 18:19:54 [kernel] usb 6-1: new low speed USB device using uhci_hcd and address 2
>Sep 17 18:19:54 [kernel] ALSA device list:
>Sep 17 18:19:54 [kernel] NET: Registered protocol family 10
>Sep 17 18:19:54 [kernel] IPv6 over IPv4 tunneling driver
>Sep 17 18:19:54 [kernel] NET: Registered protocol family 17
>Sep 17 18:19:54 [kernel] Using IPI Shortcut mode
>Sep 17 18:19:54 [kernel] usb 6-1: New USB device found, idVendor=045e, idProduct=00db
>Sep 17 18:19:54 [kernel] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>Sep 17 18:19:54 [kernel] usb 6-1: Product: NaturalÂ® Ergonomic Keyboard 4000
>Sep 17 18:19:54 [kernel] usb 6-1: Manufacturer: Microsoft
>Sep 17 18:19:54 [kernel] usb 6-1: configuration #1 chosen from 1 choice
>Sep 17 18:19:54 [kernel] input: Microsoft NaturalÂ® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input2
>Sep 17 18:19:54 [kernel] microsoft 0003:045E:00DB.0001: input: USB HID v1.11 Keyboard [Microsoft NaturalÂ® Ergonomic Keyboard 4000] on usb-0000:00:1d.0-1/input0
>Sep 17 18:19:54 [kernel] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>Sep 17 18:19:54 [kernel] ata2.00: ATA-8: WDC WD3000GLFS-01F8U0, 03.03V01, max UDMA/133
>Sep 17 18:19:54 [kernel] ata2.00: 586072368 sectors, multi 0: LBA48 NCQ (depth 31/32)
>Sep 17 18:19:54 [kernel] ata2.00: configured for UDMA/133
>Sep 17 18:19:54 [kernel] input: Microsoft NaturalÂ® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.1/input/input3
>Sep 17 18:19:54 [kernel] microsoft 0003:045E:00DB.0002: input: USB HID v1.11 Device [Microsoft NaturalÂ® Ergonomic Keyboard 4000] on usb-0000:00:1d.0-1/input1
>Sep 17 18:19:54 [kernel] scsi 1:0:0:0: Direct-Access     ATA      WDC WD3000GLFS-0 03.0 PQ: 0 ANSI: 5
>Sep 17 18:19:54 [kernel] sd 1:0:0:0: [sdb] 586072368 512-byte logical blocks: (300 GB/279 GiB)
>Sep 17 18:19:54 [kernel] sd 1:0:0:0: Attached scsi generic sg1 type 0
>Sep 17 18:19:54 [kernel] sd 1:0:0:0: [sdb] Write Protect is off
>Sep 17 18:19:54 [kernel] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Sep 17 18:19:54 [kernel]  sdb:
>Sep 17 18:19:54 [kernel]  sdb1 sdb2 sdb3
>Sep 17 18:19:54 [kernel] sd 1:0:0:0: [sdb] Attached SCSI disk
>Sep 17 18:19:54 [kernel] usb 7-2: new full speed USB device using uhci_hcd and address 2
>Sep 17 18:19:54 [kernel] ata3: SATA link down (SStatus 0 SControl 300)
>Sep 17 18:19:54 [kernel] usb 7-2: New USB device found, idVendor=046d, idProduct=c041
>Sep 17 18:19:54 [kernel] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>Sep 17 18:19:54 [kernel] usb 7-2: Product: USB Gaming Mouse
>Sep 17 18:19:54 [kernel] usb 7-2: Manufacturer: Logitech
>Sep 17 18:19:54 [kernel] usb 7-2: configuration #1 chosen from 1 choice
>Sep 17 18:19:54 [kernel] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input4
>Sep 17 18:19:54 [kernel] generic-usb 0003:046D:C041.0003: input: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:1d.1-2/input0
>Sep 17 18:19:54 [kernel] generic-usb 0003:046D:C041.0004: claimed by neither input, hiddev nor hidraw
>Sep 17 18:19:54 [kernel] ata4.00: ATAPI: HL-DT-ST BD-RE  GGW-H20L, YL01, max UDMA/133
>Sep 17 18:19:54 [kernel] ata4.00: configured for UDMA/133
>Sep 17 18:19:54 [kernel] scsi 3:0:0:0: CD-ROM            HL-DT-ST BD-RE  GGW-H20L  YL01 PQ: 0 ANSI: 5
>Sep 17 18:19:54 [kernel] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
>Sep 17 18:19:54 [kernel] Uniform CD-ROM driver Revision: 3.20
>Sep 17 18:19:54 [kernel] sr 3:0:0:0: Attached scsi generic sg2 type 5
>Sep 17 18:19:54 [kernel] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>Sep 17 18:19:54 [kernel] ata5.00: ATA-8: WDC WD10EACS-00ZJB0, 01.01B01, max UDMA/133
>Sep 17 18:19:54 [kernel] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>Sep 17 18:19:54 [kernel] ata5.00: configured for UDMA/133
>Sep 17 18:19:54 [kernel] scsi 4:0:0:0: Direct-Access     ATA      WDC WD10EACS-00Z 01.0 PQ: 0 ANSI: 5
>Sep 17 18:19:54 [kernel] sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
>Sep 17 18:19:54 [kernel] sd 4:0:0:0: [sdc] Write Protect is off
>Sep 17 18:19:54 [kernel] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Sep 17 18:19:54 [kernel]  sdc:
>Sep 17 18:19:54 [kernel] sd 4:0:0:0: Attached scsi generic sg3 type 0
>Sep 17 18:19:54 [kernel]  sdc1
>Sep 17 18:19:54 [kernel] sd 4:0:0:0: [sdc] Attached SCSI disk
>Sep 17 18:19:54 [kernel] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>Sep 17 18:19:54 [kernel] ata6.00: ATA-8: WDC WD10EACS-00ZJB0, 01.01B01, max UDMA/133
>Sep 17 18:19:54 [kernel] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>Sep 17 18:19:54 [kernel] ata6.00: configured for UDMA/133
>Sep 17 18:19:54 [kernel] scsi 5:0:0:0: Direct-Access     ATA      WDC WD10EACS-00Z 01.0 PQ: 0 ANSI: 5
>Sep 17 18:19:54 [kernel] sd 5:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
>Sep 17 18:19:54 [kernel] sd 5:0:0:0: Attached scsi generic sg4 type 0
>Sep 17 18:19:54 [kernel] sd 5:0:0:0: [sdd] Write Protect is off
>Sep 17 18:19:54 [kernel] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Sep 17 18:19:54 [kernel]  sdd: sdd1
>Sep 17 18:19:54 [kernel] sd 5:0:0:0: [sdd] Attached SCSI disk
>Sep 17 18:19:54 [kernel] ata8: SATA link down (SStatus 0 SControl 300)
>Sep 17 18:19:54 [kernel] ata9: SATA link down (SStatus 0 SControl 300)
>Sep 17 18:19:54 [kernel] ata10: SATA link down (SStatus 0 SControl 300)
>Sep 17 18:19:54 [kernel] md: Waiting for all devices to be available before autodetect
>Sep 17 18:19:54 [kernel] md: If you don't use raid, use raid=noautodetect
>Sep 17 18:19:54 [kernel] md: Autodetecting RAID arrays.
>Sep 17 18:19:54 [kernel] md: Scanned 6 and added 6 devices.
>Sep 17 18:19:54 [kernel] md: autorun ...
>Sep 17 18:19:54 [kernel] md: considering sdd1 ...
>Sep 17 18:19:54 [kernel] md:  adding sdd1 ...
>Sep 17 18:19:54 [kernel] md:  adding sdc1 ...
>Sep 17 18:19:54 [kernel] md: sdb3 has different UUID to sdd1
>Sep 17 18:19:54 [kernel] md: sdb1 has different UUID to sdd1
>Sep 17 18:19:54 [kernel] md: sda3 has different UUID to sdd1
>Sep 17 18:19:54 [kernel] md: sda1 has different UUID to sdd1
>Sep 17 18:19:54 [kernel] md: created md4
>Sep 17 18:19:54 [kernel] md: bind<sdc1>
>Sep 17 18:19:54 [kernel] md: bind<sdd1>
>Sep 17 18:19:54 [kernel] md: running: <sdd1><sdc1>
>Sep 17 18:19:54 [kernel] raid0: looking at sdd1
>Sep 17 18:19:54 [kernel] raid0:   comparing sdd1(1953519872)
>Sep 17 18:19:54 [kernel]  with sdd1(1953519872)
>Sep 17 18:19:54 [kernel] raid0:   END
>Sep 17 18:19:54 [kernel] raid0:   ==> UNIQUE
>Sep 17 18:19:54 [kernel] raid0: 1 zones
>Sep 17 18:19:54 [kernel] raid0: looking at sdc1
>Sep 17 18:19:54 [kernel] raid0:   comparing sdc1(1953519872)
>Sep 17 18:19:54 [kernel]  with sdd1(1953519872)
>Sep 17 18:19:54 [kernel] raid0:   EQUAL
>Sep 17 18:19:54 [kernel] raid0: FINAL 1 zones
>Sep 17 18:19:54 [kernel] raid0: done.
>Sep 17 18:19:54 [kernel] raid0 : md_size is 3907039744 sectors.
>Sep 17 18:19:54 [kernel] ******* md4 configuration *********
>Sep 17 18:19:54 [kernel] zone0=[sdc1/sdd1/]
>Sep 17 18:19:54 [kernel]         zone offset=0kb device offset=0kb size=1953519872kb
>Sep 17 18:19:54 [kernel] **********************************
>Sep 17 18:19:54 [kernel] md4: detected capacity change from 0 to 2000404348928
>Sep 17 18:19:54 [kernel] md: considering sdb3 ...
>Sep 17 18:19:54 [kernel] md:  adding sdb3 ...
>Sep 17 18:19:54 [kernel] md: sdb1 has different UUID to sdb3
>Sep 17 18:19:54 [kernel] md:  adding sda3 ...
>Sep 17 18:19:54 [kernel] md: sda1 has different UUID to sdb3
>Sep 17 18:19:54 [kernel] md: created md3
>Sep 17 18:19:54 [kernel] md: bind<sda3>
>Sep 17 18:19:54 [kernel] md: bind<sdb3>
>Sep 17 18:19:54 [kernel] md: running: <sdb3><sda3>
>Sep 17 18:19:54 [kernel] raid0: looking at sdb3
>Sep 17 18:19:54 [kernel] raid0:   comparing sdb3(584781824)
>Sep 17 18:19:54 [kernel]  with sdb3(584781824)
>Sep 17 18:19:54 [kernel] raid0:   END
>Sep 17 18:19:54 [kernel] raid0:   ==> UNIQUE
>Sep 17 18:19:54 [kernel] raid0: 1 zones
>Sep 17 18:19:54 [kernel] raid0: looking at sda3
>Sep 17 18:19:54 [kernel] raid0:   comparing sda3(584781824)
>Sep 17 18:19:54 [kernel]  with sdb3(584781824)
>Sep 17 18:19:54 [kernel] raid0:   EQUAL
>Sep 17 18:19:54 [kernel] raid0: FINAL 1 zones
>Sep 17 18:19:54 [kernel] raid0: done.
>Sep 17 18:19:54 [kernel] raid0 : md_size is 1169563648 sectors.
>Sep 17 18:19:54 [kernel] ******* md3 configuration *********
>Sep 17 18:19:54 [kernel] zone0=[sda3/sdb3/]
>Sep 17 18:19:54 [kernel]         zone offset=0kb device offset=0kb size=584781824kb
>Sep 17 18:19:54 [kernel] **********************************
>Sep 17 18:19:54 [kernel] md3: detected capacity change from 0 to 598816587776
>Sep 17 18:19:54 [kernel] md: considering sdb1 ...
>Sep 17 18:19:54 [kernel] md:  adding sdb1 ...
>Sep 17 18:19:54 [kernel] md:  adding sda1 ...
>Sep 17 18:19:54 [kernel] md: created md1
>Sep 17 18:19:54 [kernel] md: bind<sda1>
>Sep 17 18:19:54 [kernel] md: bind<sdb1>
>Sep 17 18:19:54 [kernel] md: running: <sdb1><sda1>
>Sep 17 18:19:54 [kernel] raid1: raid set md1 active with 2 out of 2 mirrors
>Sep 17 18:19:54 [kernel] md1: detected capacity change from 0 to 139722752
>Sep 17 18:19:54 [kernel] md: ... autorun DONE.
>Sep 17 18:19:54 [kernel] REISERFS (device md3): using ordered data mode
>Sep 17 18:19:54 [kernel] REISERFS (device md3): journal params: device md3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>Sep 17 18:19:54 [kernel] REISERFS (device md3): checking transaction log (md3)
>Sep 17 18:19:54 [kernel] REISERFS (device md3): Using r5 hash to sort names
>Sep 17 18:19:54 [kernel] VFS: Mounted root (reiserfs filesystem) readonly on device 9:3.
>Sep 17 18:19:54 [kernel] Freeing unused kernel memory: 360k freed
>Sep 17 18:19:54 [kernel] udev: starting version 145
>Sep 17 18:19:54 [kernel]  md4: unknown partition table
>Sep 17 18:19:54 [kernel]  md1:
>Sep 17 18:19:54 [kernel] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>Sep 17 18:19:54 [kernel] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a0300b1)
>Sep 17 18:19:54 [kernel] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
>Sep 17 18:19:54 [kernel]  unknown partition table
>Sep 17 18:19:54 [kernel] REISERFS (device md4): found reiserfs format "3.6" with standard journal
>Sep 17 18:19:54 [kernel] REISERFS (device md4): using ordered data mode
>Sep 17 18:19:54 [kernel] REISERFS (device md4): journal params: device md4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>Sep 17 18:19:54 [kernel] REISERFS (device md4): checking transaction log (md4)
>Sep 17 18:19:54 [kernel] REISERFS (device md4): Using r5 hash to sort names
>Sep 17 18:19:54 [kernel] Adding 506036k swap on /dev/sda2.  Priority:-1 extents:1 across:506036k 
>Sep 17 18:19:54 [kernel] Adding 506036k swap on /dev/sdb2.  Priority:-2 extents:1 across:506036k 
>Sep 17 18:19:54 [acpid] 1 rule loaded_
>Sep 17 18:19:54 [acpid] waiting for events: event logging is off_
>Sep 17 18:19:55 [acpid] client connected from 1695[103:409]_
>Sep 17 18:19:55 [acpid] 1 client rule loaded_
>Sep 17 18:19:55 [kernel] skge eth0: enabling interface
>Sep 17 18:19:55 [kernel] ADDRCONF(NETDEV_UP): eth0: link is not ready
>Sep 17 18:19:58 [kernel] skge eth0: Link is up at 1000 Mbps, full duplex, flow control both
>Sep 17 18:19:58 [kernel] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>Sep 17 18:20:10 [ntpdate] step time server 85.17.207.62 offset -0.027568 sec
>Sep 17 18:20:11 [sshd] Server listening on 0.0.0.0 port 22.
>Sep 17 18:20:11 [sshd] Server listening on :: port 22.
>Sep 17 18:20:18 [login] pam_unix(login:session): session opened for user root by LOGIN(uid=0)
>Sep 17 18:20:18 [login] ROOT LOGIN  on '/dev/tty1'
>Sep 17 18:20:45 [kernel] [drm] Module unloaded
>Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a0300b1)
>Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
>Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: ... appears to be valid
>Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: BIT BIOS found
>Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: Bios version 62.00.59.00
>Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported
>Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
>Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: Raw DCB entry 0: 04000320 00000028
>Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: Raw DCB entry 1: 01000322 00020030
>Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: Raw DCB entry 2: 02011310 00000028
>Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: Raw DCB entry 3: 02011312 00020030
>Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: Raw DCB entry 4: 010223f1 00c1c023
>Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD113
>Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: 0xEA39: Init table command not found: 0x87
>Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: 0xEA5C: Init table command not found: 0x87
>Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: 0xEA16: Init table command not found: 0x87
>Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: 0xEA7F: Init table command not found: 0x87
>Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD53E
>Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE9DB
>Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEAB8
>Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEB8A
>Sep 17 18:20:52 [kernel] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEBEF
>Sep 17 18:20:54 [kernel] nouveau 0000:01:00.0: 0xEBEF: Condition still not met after 0ms, skiping following opcodes
>Sep 17 18:20:54 [kernel] nouveau 0000:01:00.0: 0xC0A4: parsing output script 0
>                - Last output repeated twice -
>Sep 17 18:20:54 [kernel] nouveau 0000:01:00.0: 0xA642: parsing output script 0
>Sep 17 18:20:54 [kernel] [TTM] Zone  kernel: Available graphics memory: 451562 kiB.
>Sep 17 18:20:54 [kernel] nouveau 0000:01:00.0: Allocating FIFO number 1
>Sep 17 18:20:54 [kernel] BUG: unable to handle kernel NULL pointer dereference at 00000003
>Sep 17 18:20:54 [kernel] IP: [<c107dbf1>] kmem_cache_alloc+0x41/0xb0
>Sep 17 18:20:54 [kernel] *pde = 00000000 
>Sep 17 18:20:54 [kernel] Modules linked in: nouveau(+) ttm drm_kms_helper cfbcopyarea cfbimgblt cfbfillrect [last unloaded: nouveau]
>Sep 17 18:20:54 [kernel] Pid: 1845, comm: modprobe Not tainted (2.6.31-rc8-ge3ac207 #39) P5E64 WS EVOLUTION
>Sep 17 18:20:54 [kernel] EIP: 0060:[<c107dbf1>] EFLAGS: 00010006 CPU: 3
>Sep 17 18:20:54 [kernel] EIP is at kmem_cache_alloc+0x41/0xb0
>Sep 17 18:20:54 [kernel] EAX: 00000000 EBX: 00000003 ECX: c11b68f5 EDX: c1c547d0
>Sep 17 18:20:54 [kernel] ESI: 00000202 EDI: 000080d0 EBP: c1424be4 ESP: f545dd30
>Sep 17 18:20:54 [kernel]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
>Sep 17 18:20:54 [kernel]  00000000 00010000 00000060 00000000 00010000 f7276000 f545ddb4 c11b68f5
>Sep 17 18:20:54 [kernel] <0> 00000000 00000000 f56ef800 f7276000 fb6883d5 00000000 00000004 00000000
>Sep 17 18:20:54 [kernel] <0> 00000000 00000000 00000001 f545ddb4 00001000 00000000 f56eff00 f7276000
>Sep 17 18:20:54 [kernel]  [<c11b68f5>] ? drm_gem_object_alloc+0x25/0xc0
>Sep 17 18:20:54 [kernel]  [<fb6883d5>] ? nouveau_gem_new+0x85/0xd0 [nouveau]
>Sep 17 18:20:54 [kernel]  [<fb684410>] ? nouveau_notifier_init_channel+0x60/0x100 [nouveau]
>Sep 17 18:20:54 [kernel]  [<fb67e761>] ? nouveau_channel_alloc+0x1e1/0x7d0 [nouveau]
>Sep 17 18:20:54 [kernel]  [<c107e295>] ? __kmalloc+0x25/0x100
>Sep 17 18:20:54 [kernel]  [<fb67d55b>] ? nouveau_card_init+0x4eb/0xb80 [nouveau]
>Sep 17 18:20:54 [kernel]  [<c11b9531>] ? drm_get_dev+0x2a1/0x440
>Sep 17 18:20:54 [kernel]  [<c115474b>] ? local_pci_probe+0xb/0x10
>Sep 17 18:20:54 [kernel]  [<c1154989>] ? pci_device_probe+0x69/0x90
>Sep 17 18:20:54 [kernel]  [<c11cd22d>] ? driver_probe_device+0x7d/0x180
>Sep 17 18:20:54 [kernel]  [<c1154860>] ? pci_match_device+0xb0/0xd0
>Sep 17 18:20:54 [kernel]  [<c11cd3a9>] ? __driver_attach+0x79/0x80
>Sep 17 18:20:54 [kernel]  [<c11548c0>] ? pci_device_remove+0x0/0x40
>Sep 17 18:20:54 [kernel]  [<c11ccb99>] ? bus_for_each_dev+0x49/0x70
>Sep 17 18:20:54 [kernel]  [<c11548c0>] ? pci_device_remove+0x0/0x40
>Sep 17 18:20:54 [kernel]  [<c11cd0c6>] ? driver_attach+0x16/0x20
>Sep 17 18:20:54 [kernel]  [<c11cd330>] ? __driver_attach+0x0/0x80
>Sep 17 18:20:54 [kernel]  [<c11cc4af>] ? bus_add_driver+0xaf/0x220
>Sep 17 18:20:54 [kernel]  [<c11548c0>] ? pci_device_remove+0x0/0x40
>Sep 17 18:20:54 [kernel]  [<c11cd627>] ? driver_register+0x67/0x150
>Sep 17 18:20:54 [kernel]  [<c11b51fd>] ? drm_init+0x2d/0xe0
>Sep 17 18:20:54 [kernel]  [<c1154d4d>] ? __pci_register_driver+0x3d/0xb0
>Sep 17 18:20:54 [kernel]  [<f882e000>] ? nouveau_init+0x0/0x3c [nouveau]
>Sep 17 18:20:54 [kernel]  [<c100103e>] ? do_one_initcall+0x2e/0x190
>Sep 17 18:20:54 [kernel]  [<c1052743>] ? sys_init_module+0xb3/0x1f0
>Sep 17 18:20:54 [kernel]  [<c1083161>] ? sys_read+0x41/0x80
>Sep 17 18:20:54 [kernel]  [<c1002df4>] ? sysenter_do_call+0x12/0x26
>Sep 17 18:20:54 [kernel] ---[ end trace 9df2d5b9d9112ef2 ]---
>Sep 17 18:21:05 [shutdown] shutting down for system reboot

Actions: View

Attachments on bug 23712: 29219 | 29647 | 29648

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.