Attachment 30029 Details for Bug 23212 – dmesg with patch1

dmesg with patch1

dmesg-patch1 (text/plain), 23.96 KB, created by prg on 2009-10-03 17:10:31 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: prg

Created: 2009-10-03 17:10:31 UTC

Size: 23.96 KB

patch

obsolete

>Linux version 2.6.31-rc9-00614-g4e9caac-dirty (prg@carbon) (gcc version 4.3.3 (Gentoo 4.3.3-r2 p1.2, pie-10.1.5) ) #12 Sun Oct 4 01:41:47 CEST 2009
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  NSC Geode by NSC
>  Cyrix CyrixInstead
>  Centaur CentaurHauls
>  Transmeta GenuineTMx86
>  Transmeta TransmetaCPU
>  UMC UMC UMC UMC
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001fdf0000 (usable)
> BIOS-e820: 000000001fdf0000 - 000000001fdfb000 (ACPI data)
> BIOS-e820: 000000001fdfb000 - 000000001fe00000 (ACPI NVS)
> BIOS-e820: 000000001fe00000 - 0000000020000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>DMI present.
>Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>last_pfn = 0x1fdf0 max_arch_pfn = 0x100000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-C7FFF write-protect
>  C8000-EFFFF uncachable
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask FE0000000 write-back
>  1 base 01FE00000 mask FFFE00000 uncachable
>  2 disabled
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>initial memory mapped : 0 - 01800000
>init_memory_mapping: 0000000000000000-000000001fdf0000
> 0000000000 - 0000400000 page 4k
> 0000400000 - 001fc00000 page 2M
> 001fc00000 - 001fdf0000 page 4k
>kernel direct mapping tables up to 1fdf0000 @ 10000-15000
>ACPI: RSDP 000f7ae0 00014 (v00 SONY  )
>ACPI: RSDT 1fdf6d58 0002C (v01   SONY       F0 20040119 PTL  00000000)
>ACPI: FACP 1fdfaf3c 00074 (v01   SONY       F0 20040119 PTL  01000000)
>ACPI: DSDT 1fdf6d84 041B8 (v01   SONY       F0 20040119 PTL  0100000E)
>ACPI: FACS 1fdfbfc0 00040
>ACPI: APIC 1fdfafb0 00050 (v01   SONY       F0 20040119 PTL  00000000)
>509MB LOWMEM available.
>  mapped low ram: 0 - 1fdf0000
>  low ram: 0 - 1fdf0000
>  node 0 low ram: 00000000 - 1fdf0000
>  node 0 bootmap 00011000 - 00014fc0
>(6 early reservations) ==> bootmem [0000000000 - 001fdf0000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0001000000 - 000140d3f8]    TEXT DATA BSS ==> [0001000000 - 000140d3f8]
>  #2 [000009f400 - 0000100000]    BIOS reserved ==> [000009f400 - 0000100000]
>  #3 [000140e000 - 00014140f0]              BRK ==> [000140e000 - 00014140f0]
>  #4 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
>  #5 [0000011000 - 0000015000]          BOOTMAP ==> [0000011000 - 0000015000]
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  Normal   0x00001000 -> 0x0001fdf0
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x0001fdf0
>On node 0 totalpages: 130431
>free_area_init_node: node 0, pgdat c1365c00, node_mem_map c1415200
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3951 pages, LIFO batch:0
>  Normal zone: 988 pages used for memmap
>  Normal zone: 125460 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x8008
>Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129411
>Kernel command line: root=/dev/hda3 ro
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>Memory: 512952k/522176k available (2637k kernel code, 8680k reserved, 850k data, 256k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xfffe5000 - 0xfffff000   ( 104 kB)
>    vmalloc : 0xe05f0000 - 0xfffe3000   ( 505 MB)
>    lowmem  : 0xc0000000 - 0xdfdf0000   ( 509 MB)
>      .init : 0xc1368000 - 0xc13a8000   ( 256 kB)
>      .data : 0xc12935a1 - 0xc1367de8   ( 850 kB)
>      .text : 0xc1000000 - 0xc12935a1   (2637 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>NR_IRQS:16
>Fast TSC calibration using PIT
>Detected 2806.443 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Calibrating delay loop (skipped), value calculated using timer frequency.. 5612.88 BogoMIPS (lpj=2806443)
>Mount-cache hash table entries: 512
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>mce: CPU supports 4 MCE banks
>Performance Counters: no PMU driver, software counters only.
>CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20090521
>ACPI: setting ELCR to 0200 (from 0e00)
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd996, last bus=1
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: EC: GPE = 0x15, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in interrupt mode
>ACPI: ACPI Dock Station Driver: 1 docks/bays found
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd3ffffff]
>pci 0000:00:02.0: Enabling SiS 96x SMBus
>pci 0000:00:02.1: reg 20 io port: [0x8100-0x811f]
>pci 0000:00:02.5: reg 20 io port: [0x1000-0x100f]
>pci 0000:00:02.6: reg 10 io port: [0x1800-0x18ff]
>pci 0000:00:02.6: reg 14 io port: [0x1400-0x147f]
>pci 0000:00:02.6: supports D1 D2
>pci 0000:00:02.6: PME# supported from D3hot D3cold
>pci 0000:00:02.6: PME# disabled
>pci 0000:00:02.7: reg 10 io port: [0x1c00-0x1cff]
>pci 0000:00:02.7: reg 14 io port: [0x1480-0x14ff]
>pci 0000:00:02.7: supports D1 D2
>pci 0000:00:02.7: PME# supported from D3hot D3cold
>pci 0000:00:02.7: PME# disabled
>pci 0000:00:03.0: reg 10 32bit mmio: [0xd4000000-0xd4000fff]
>pci 0000:00:03.1: reg 10 32bit mmio: [0xd4001000-0xd4001fff]
>pci 0000:00:03.2: reg 10 32bit mmio: [0xd4002000-0xd4002fff]
>pci 0000:00:03.3: reg 10 32bit mmio: [0xd4003000-0xd4003fff]
>pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:03.3: PME# disabled
>pci 0000:00:04.0: reg 10 io port: [0x2000-0x20ff]
>pci 0000:00:04.0: reg 14 32bit mmio: [0xd4004000-0xd4004fff]
>pci 0000:00:04.0: reg 30 32bit mmio: [0x000000-0x01ffff]
>pci 0000:00:04.0: supports D1 D2
>pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:04.0: PME# disabled
>pci 0000:00:0a.0: reg 10 32bit mmio: [0x000000-0x000fff]
>pci 0000:00:0a.0: supports D1 D2
>pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0a.0: PME# disabled
>pci 0000:00:0a.1: reg 10 32bit mmio: [0x000000-0x000fff]
>pci 0000:00:0a.1: supports D1 D2
>pci 0000:00:0a.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0a.1: PME# disabled
>pci 0000:00:0a.2: reg 10 32bit mmio: [0xd4005000-0xd40057ff]
>pci 0000:00:0a.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:0a.2: PME# disabled
>pci 0000:01:00.0: reg 10 32bit mmio: [0xd5000000-0xd5ffffff]
>pci 0000:01:00.0: reg 14 32bit mmio: [0xe0000000-0xefffffff]
>pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
>pci 0000:00:01.0: bridge 32bit mmio: [0xd5000000-0xd5ffffff]
>pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xefffffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11) *0, disabled.
>SCSI subsystem initialized
>libata version 3.00 loaded.
>PCI: Using ACPI for IRQ routing
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:04: ioport range 0x8000-0x808f has been reserved
>system 00:04: ioport range 0x8090-0x80ff has been reserved
>system 00:04: ioport range 0x8100-0x811f has been reserved
>system 00:04: ioport range 0x4d0-0x4d1 has been reserved
>system 00:04: ioport range 0xfe00-0xfe00 has been reserved
>system 00:04: ioport range 0x600-0x60f has been reserved
>system 00:04: iomem range 0xfec00000-0xfecfffff could not be reserved
>system 00:04: iomem range 0xfee00000-0xfeefffff could not be reserved
>system 00:04: iomem range 0xffc00000-0xffc00fff has been reserved
>system 00:04: iomem range 0xffe00000-0xffe00fff has been reserved
>system 00:04: iomem range 0xffe80000-0xffefffff has been reserved
>pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xf0000000-0xefffffff]
>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:01.0:   IO window: disabled
>pci 0000:00:01.0:   MEM window: 0xd5000000-0xd5ffffff
>pci 0000:00:01.0:   PREFETCH window: 0xe0000000-0xefffffff
>pci 0000:00:0a.0: CardBus bridge, secondary bus 0000:02
>pci 0000:00:0a.0:   IO window: 0x002400-0x0024ff
>pci 0000:00:0a.0:   IO window: 0x002800-0x0028ff
>pci 0000:00:0a.0:   PREFETCH window: 0x20000000-0x23ffffff
>pci 0000:00:0a.0:   MEM window: 0x24000000-0x27ffffff
>pci 0000:00:0a.1: CardBus bridge, secondary bus 0000:06
>pci 0000:00:0a.1:   IO window: 0x002c00-0x002cff
>pci 0000:00:0a.1:   IO window: 0x003000-0x0030ff
>pci 0000:00:0a.1:   PREFETCH window: 0x28000000-0x2bffffff
>pci 0000:00:0a.1:   MEM window: 0x2c000000-0x2fffffff
>pci 0000:00:0a.0: enabling device (0000 -> 0003)
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>pci 0000:00:0a.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
>pci 0000:00:0a.1: enabling device (0000 -> 0003)
>pci 0000:00:0a.1: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
>pci_bus 0000:01: resource 1 mem: [0xd5000000-0xd5ffffff]
>pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
>pci_bus 0000:02: resource 0 io:  [0x2400-0x24ff]
>pci_bus 0000:02: resource 1 io:  [0x2800-0x28ff]
>pci_bus 0000:02: resource 2 pref mem [0x20000000-0x23ffffff]
>pci_bus 0000:02: resource 3 mem: [0x24000000-0x27ffffff]
>pci_bus 0000:06: resource 0 io:  [0x2c00-0x2cff]
>pci_bus 0000:06: resource 1 io:  [0x3000-0x30ff]
>pci_bus 0000:06: resource 2 pref mem [0x28000000-0x2bffffff]
>pci_bus 0000:06: resource 3 mem: [0x2c000000-0x2fffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>NET: Registered protocol family 1
>JFS: nTxBlock = 4008, nTxLock = 32065
>SGI XFS with security attributes, large block/inode numbers, no debug enabled
>msgmni has been set to 1002
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:01:00.0: Boot video device
>ACPI: AC Adapter [ACAD] (on-line)
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
>ACPI: Lid Switch [LID]
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>ACPI: Power Button [PWRB]
>Marking TSC unstable due to TSC halts in idle
>ACPI: CPU0 (power states: C1[C1] C2[C2]
>Switched to high resolution mode on CPU 0
> C3[C2])
>processor LNXCPU:00: registered as cooling_device0
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [ATF0] (73 C)
>ACPI: Battery Slot [BAT1] (battery present)
>ACPI: Battery Slot [BAT2] (battery absent)
>Real Time Clock Driver v1.12b
>Linux agpgart interface v0.103
>loop: module loaded
>Uniform Multi-Platform E-IDE driver
>sis5513 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller
>sis5513 0000:00:02.5: IDE controller (0x1039:0x5513 rev 0x00)
>sis5513 0000:00:02.5: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x1000-0x1007
>    ide1: BM-DMA at 0x1008-0x100f
>Probing IDE interface ide0...
>hda: IC25N060ATMR04-0, ATA DISK drive
>hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>hda: UDMA/100 mode selected
>Probing IDE interface ide1...
>hdc: SONY DVD RW DW-U50A, ATAPI CD/DVD-ROM drive
>hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>hdc: UDMA/33 mode selected
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide1 at 0x170-0x177,0x376 on irq 15
>ide-gd driver 1.18
>hda: max request size: 512KiB
>hda: 117210240 sectors (60011 MB) w/7884KiB Cache, CHS=16383/255/63
>hda: cache flushes supported
> hda: hda1 hda2 hda3
>ide-cd driver 5.00
>ide-cd: hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache
>Uniform CD-ROM driver Revision: 3.20
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>NET: Registered protocol family 17
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
>input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input3
>input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input4
>XFS mounting filesystem hda3
>Starting XFS recovery on filesystem: hda3 (logdev: internal)
>Ending XFS recovery on filesystem: hda3 (logdev: internal)
>VFS: Mounted root (xfs filesystem) readonly on device 3:3.
>Freeing unused kernel memory: 256k freed
>Write protecting the kernel text: 2640k
>Write protecting the kernel read-only data: 708k
>udev: starting version 141
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>agpgart-sis 0000:00:00.0: SiS chipset [1039/0648]
>agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xd0000000
>sis900.c: v1.08.10 Apr. 2 2006
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>sis900 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
>0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
>0000:00:04.0: Using transceiver found at address 1 as default
>eth0: SiS 900 PCI Fast Ethernet at 0x2000, IRQ 11, 08:00:46:aa:97:85
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9
>PCI: setting IRQ 9 as level-triggered
>ohci_hcd 0000:00:03.0: PCI INT A -> Link[LNKE] -> GSI 9 (level, low) -> IRQ 9
>ohci_hcd 0000:00:03.0: OHCI Host Controller
>ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:03.0: irq 9, io mem 0xd4000000
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: OHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.31-rc9-00614-g4e9caac-dirty ohci_hcd
>usb usb1: SerialNumber: 0000:00:03.0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ehci_hcd 0000:00:03.3: enabling device (0000 -> 0002)
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ehci_hcd 0000:00:03.3: PCI INT D -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10
>ehci_hcd 0000:00:03.3: EHCI Host Controller
>ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:03.3: cache line size of 128 is not supported
>ehci_hcd 0000:00:03.3: irq 10, io mem 0xd4003000
>ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.31-rc9-00614-g4e9caac-dirty ehci_hcd
>usb usb2: SerialNumber: 0000:00:03.3
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
>ohci_hcd 0000:00:03.1: PCI INT B -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11
>ohci_hcd 0000:00:03.1: OHCI Host Controller
>ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:03.1: irq 11, io mem 0xd4001000
>parport_pc 00:09: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)]
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: OHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.31-rc9-00614-g4e9caac-dirty ohci_hcd
>usb usb3: SerialNumber: 0000:00:03.1
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ohci_hcd 0000:00:03.2: enabling device (0010 -> 0012)
>ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
>ohci_hcd 0000:00:03.2: PCI INT C -> Link[LNKG] -> GSI 10 (level, low) -> IRQ 10
>ohci_hcd 0000:00:03.2: OHCI Host Controller
>ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:03.2: irq 10, io mem 0xd4002000
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: OHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.31-rc9-00614-g4e9caac-dirty ohci_hcd
>usb usb4: SerialNumber: 0000:00:03.2
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>yenta_cardbus 0000:00:0a.0: CardBus bridge found [104d:814e]
>yenta_cardbus 0000:00:0a.0: ISA IRQ mask 0x0038, PCI irq 11
>yenta_cardbus 0000:00:0a.0: Socket status: 30000820
>Intel ICH Modem 0000:00:02.6: enabling device (0000 -> 0001)
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
>Intel ICH Modem 0000:00:02.6: PCI INT C -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9
>MC'97 1 converters and GPIO not ready (0xff00)
>yenta_cardbus 0000:00:0a.1: CardBus bridge found [104d:814e]
>yenta_cardbus 0000:00:0a.1: ISA IRQ mask 0x0038, PCI irq 11
>yenta_cardbus 0000:00:0a.1: Socket status: 30000006
>Intel ICH 0000:00:02.7: PCI INT C -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9
>usb 4-2: new full speed USB device using ohci_hcd and address 2
>usb 4-2: New USB device found, idVendor=054c, idProduct=0069
>usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 4-2: Product: USB Memory Stick Slot
>usb 4-2: Manufacturer: Sony
>usb 4-2: configuration #1 chosen from 1 choice
>Initializing USB Mass Storage driver...
>scsi0 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
>pci 0000:02:00.0: reg 10 32bit mmio: [0xffffe000-0xffffffff]
>cfg80211: Calling CRDA to update world regulatory domain
>rt2500pci 0000:02:00.0: enabling device (0000 -> 0002)
>rt2500pci 0000:02:00.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
>rt2500pci 0000:02:00.0: setting latency timer to 64
>phy0: Selected rate control algorithm 'minstrel'
>intel8x0_measure_ac97_clock: measured 50518 usecs (2430 samples)
>intel8x0: clocking to 48000
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda2, internal journal
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with writeback data mode.
>Adding 524280k swap on /mnt/u/var/swap.  Priority:-1 extents:2303 across:1095292k 
>Adding 524280k swap on /mnt/u/var/swap2.  Priority:-2 extents:1009 across:1898268k 
>scsi 0:0:0:0: Direct-Access     Sony     MSC-U03          2.00 PQ: 0 ANSI: 0 CCS
>usb-storage: device scan complete
>sd 0:0:0:0: [sda] Attached SCSI removable disk
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>eth0: Media Link Off
>hdc: UDMA/33 mode selected
>wlan0: authenticate with AP 00:14:bf:a2:63:f9
>wlan0: authenticated
>wlan0: associate with AP 00:14:bf:a2:63:f9
>wlan0: RX AssocResp from 00:14:bf:a2:63:f9 (capab=0x411 status=0 aid=1)
>wlan0: associated
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>nouveau 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
>[drm] nouveau 0000:01:00.0: failed to evaluate _DSM: 5
>[drm] nouveau 0000:01:00.0: Detected an NV30 generation card (0x031a00a1)
>[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
>[drm] nouveau 0000:01:00.0: ... BIOS signature not found
>[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
>[drm] nouveau 0000:01:00.0: ... BIOS checksum invalid
>[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PCIROM
>[drm] nouveau 0000:01:00.0: ... appears to be valid
>[drm] nouveau 0000:01:00.0: BMP BIOS found
>[drm] nouveau 0000:01:00.0: BMP version 5.39
>[drm] nouveau 0000:01:00.0: Bios version 04.31.20.37
>[drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.2
>[drm] nouveau 0000:01:00.0: Raw DCB entry 0: 03000323 00000005
>[drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01010300 00009c40
>[drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02010321 00000703
>[drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE4A0
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE7F2
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE955
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEAC5
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEAE2
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xEAFF
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xECEB
>[drm] nouveau 0000:01:00.0: BIOS FP mode: 1024x768 (65000kHz pixel clock)
>[TTM] Zone  kernel: Available graphics memory: 256650 kiB.
>agpgart-sis 0000:00:00.0: AGP 3.0 bridge
>agpgart: modprobe tried to set rate=x12. Setting to AGP3 x8 mode.
>agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:00:00.0 into 8x mode
>agpgart-sis 0000:00:00.0: SiS delay workaround: giving bridge time to recover
>agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:01:00.0 into 8x mode
>[drm] nouveau 0000:01:00.0: Allocating FIFO number 0
>[drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0
>[drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0
>[drm] nouveau 0000:01:00.0: Detected a LVDS connector
>[drm] nouveau 0000:01:00.0: Detected a VGA connector
>[drm] nouveau 0000:01:00.0: Saving VGA fonts
>[drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x49000, bo cd511080
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 0)
>[drm] nouveau 0000:01:00.0: Calling LVDS script 1:
>[drm] nouveau 0000:01:00.0: Calling LVDS script 6:
>[drm] nouveau 0000:01:00.0: 0xD8AD: Parsing digital output script table
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 2)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
>[drm] nouveau 0000:01:00.0: vpll: n1 53 n2 4 m1 11 m2 1 log2p 3
>[drm] LVDS-7: set mode 1024x768 22
>[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
>[drm] nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 0
>[drm] nouveau 0000:01:00.0: Calling LVDS script 2:
>[drm] nouveau 0000:01:00.0: 0xD9DB: Parsing digital output script table
>[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 0)
>[drm] nouveau 0000:01:00.0: Calling LVDS script 5:
>[drm] nouveau 0000:01:00.0: 0xD896: Parsing digital output script table
>[drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 0 using output A
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
>Console: switching to colour frame buffer device 128x48
>fb0: nouveaufb frame buffer device
>registered panic notifier
>[drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0

Actions: View

Attachments on bug 23212: 28436 | 29990 | 30013 | 30026 | 30027 | 30029 | 30042 | 30056 | 30057 | 30058

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.