Attachment 31601 Details for Bug 25366 – Kernel log from init to first errors...

Kernel log from init to first errors...

kernel-first-errors.log (text/plain), 37.65 KB, created by Pawel Moll on 2009-11-30 09:06:21 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Pawel Moll

Created: 2009-11-30 09:06:21 UTC

Size: 37.65 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.31.5-127.fc12.i686.PAE (mockbuild@x86-3.fedora.phx.redhat.com) (gcc version 4.4.2 20091027 (Red Hat 4.4.2-7) (GCC) ) #1 SMP Sat Nov 7 21:25:57 EST 2009
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  NSC Geode by NSC
>  Cyrix CyrixInstead
>  Centaur CentaurHauls
>  Transmeta GenuineTMx86
>  Transmeta TransmetaCPU
>  UMC UMC UMC UMC
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ff75000 (usable)
> BIOS-e820: 000000007ff75000 - 000000007ff77000 (ACPI NVS)
> BIOS-e820: 000000007ff77000 - 000000007ff98000 (ACPI data)
> BIOS-e820: 000000007ff98000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>DMI 2.3 present.
>last_pfn = 0x7ff75 max_arch_pfn = 0x1000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-CFFFF write-protect
>  D0000-DFFFF uncachable
>  E0000-E3FFF write-protect
>  E4000-EFFFF uncachable
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask F80000000 write-back
>  1 disabled
>  2 disabled
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>initial memory mapped : 0 - 01000000
>init_memory_mapping: 0000000000000000-00000000375fe000
>Using x86 segment limits to approximate NX protection
> 0000000000 - 0000200000 page 4k
> 0000200000 - 0037400000 page 2M
> 0037400000 - 00375fe000 page 4k
>kernel direct mapping tables up to 375fe000 @ 7000-f000
>RAMDISK: 37587000 - 37fefe01
>Allocated new RAMDISK: 00afb000 - 01563e01
>Move RAMDISK from 0000000037587000 - 0000000037fefe00 to 00afb000 - 01563e00
>ACPI: RSDP 000febc0 00014 (v00 DELL  )
>ACPI: RSDT 000fd4d4 00038 (v01 DELL    WS 650  00000008 ASL  00000061)
>ACPI: FACP 000fd50c 00074 (v01 DELL    WS 650  00000008 ASL  00000061)
>ACPI: DSDT ffff0db4 02989 (v01   DELL    dt_ex 00001000 MSFT 0100000D)
>ACPI: FACS 7ff75000 00040
>ACPI: SSDT ffff387a 000BA (v01   DELL    st_ex 00001000 MSFT 0100000D)
>ACPI: APIC 000fd580 00084 (v01 DELL    WS 650  00000008 ASL  00000061)
>ACPI: BOOT 000fd604 00028 (v01 DELL    WS 650  00000008 ASL  00000061)
>ACPI: ASF! 000fd62c 00067 (v16 DELL    WS 650  00000008 ASL  00000061)
>ACPI: Local APIC address 0xfee00000
>1161MB HIGHMEM available.
>885MB LOWMEM available.
>  mapped low ram: 0 - 375fe000
>  low ram: 0 - 375fe000
>  node 0 low ram: 00000000 - 375fe000
>  node 0 bootmap 0000b000 - 00011ec0
>(9 early reservations) ==> bootmem [0000000000 - 00375fe000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>  #3 [0000400000 - 0000af1210]    TEXT DATA BSS ==> [0000400000 - 0000af1210]
>  #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
>  #5 [0000af2000 - 0000afa1b0]              BRK ==> [0000af2000 - 0000afa1b0]
>  #6 [0000007000 - 000000b000]          PGTABLE ==> [0000007000 - 000000b000]
>  #7 [0000afb000 - 0001563e01]      NEW RAMDISK ==> [0000afb000 - 0001563e01]
>  #8 [000000b000 - 0000012000]          BOOTMAP ==> [000000b000 - 0000012000]
>found SMP MP-table at [c00fe710] fe710
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  Normal   0x00001000 -> 0x000375fe
>  HighMem  0x000375fe -> 0x0007ff75
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x000000a0
>    0: 0x00000100 -> 0x0007ff75
>On node 0 totalpages: 524053
>free_area_init_node: node 0, pgdat c0995ba0, node_mem_map c1564000
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3968 pages, LIFO batch:0
>  Normal zone: 1740 pages used for memmap
>  Normal zone: 220978 pages, LIFO batch:31
>  HighMem zone: 2323 pages used for memmap
>  HighMem zone: 295012 pages, LIFO batch:31
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled)
>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
>IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
>ACPI: IOAPIC (id[0x0a] address[0xfec80800] gsi_base[48])
>IOAPIC[2]: apic_id 10, version 32, address 0xfec80800, GSI 48-71
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 3 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 4 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 72
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
>NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
>PERCPU: Embedded 15 pages at c256e000, static data 37788 bytes
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519958
>Kernel command line: ro root=LABEL=/ rhgb quiet SYSFONT=latarcyrheb-sun16 LANG=en_GB.UTF-8 KEYTABLE=pl2
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>allocated 10482980 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>Initializing HighMem for node 0 (000375fe:0007ff75)
>Memory: 2049796k/2096596k available (3569k kernel code, 45552k reserved, 2214k data, 448k init, 1189340k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffad5000 - 0xfffff000   (5288 kB)
>    pkmap   : 0xff600000 - 0xff800000   (2048 kB)
>    vmalloc : 0xf7dfe000 - 0xff5fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf75fe000   ( 885 MB)
>      .init : 0xc09a7000 - 0xc0a17000   ( 448 kB)
>      .data : 0xc077c76f - 0xc09a6028   (2214 kB)
>      .text : 0xc0400000 - 0xc077c76f   (3569 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>Hierarchical RCU implementation.
>NR_IRQS:1280
>Fast TSC calibration using PIT
>Detected 2657.839 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Calibrating delay loop (skipped), value calculated using timer frequency.. 5315.67 BogoMIPS (lpj=2657839)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 4 MCE banks
>CPU0: Thermal monitoring enabled (TM1)
>Performance Counters: no PMU driver, software counters only.
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20090521
>ftrace: converting mcount calls to 0f 1f 44 00 00
>ftrace: allocating 20611 entries in 41 pages
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Xeon(TM) CPU 2.66GHz stepping 07
>Booting processor 1 APIC 0x6 ip 0x6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5314.72 BogoMIPS (lpj=2657360)
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 3
>CPU: Processor Core ID: 0
>mce: CPU supports 4 MCE banks
>CPU1: Thermal monitoring enabled (TM1)
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: Intel(R) Xeon(TM) CPU 2.66GHz stepping 09
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Booting processor 2 APIC 0x1 ip 0x6000
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 5314.68 BogoMIPS (lpj=2657342)
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 4 MCE banks
>CPU2: Thermal monitoring enabled (TM1)
>x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
>CPU2: Intel(R) Xeon(TM) CPU 2.66GHz stepping 07
>checking TSC synchronization [CPU#0 -> CPU#2]: passed.
>Booting processor 3 APIC 0x7 ip 0x6000
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 5314.74 BogoMIPS (lpj=2657373)
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 3
>CPU: Processor Core ID: 0
>mce: CPU supports 4 MCE banks
>CPU3: Thermal monitoring enabled (TM1)
>x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
>CPU3: Intel(R) Xeon(TM) CPU 2.66GHz stepping 09
>checking TSC synchronization [CPU#0 -> CPU#3]: passed.
>Brought up 4 CPUs
>Total of 4 processors activated (21259.82 BogoMIPS).
>sizeof(vma)=88 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=352 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=500 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=192 bytes
>sizeof(task_struct)=3256 bytes
>CPU0 attaching sched-domain:
> domain 0: span 0,2 level SIBLING
>  groups: 0 2
>  domain 1: span 0-3 level CPU
>   groups: 0,2 1,3
>CPU1 attaching sched-domain:
> domain 0: span 1,3 level SIBLING
>  groups: 1 3
>  domain 1: span 0-3 level CPU
>   groups: 1,3 0,2
>CPU2 attaching sched-domain:
> domain 0: span 0,2 level SIBLING
>  groups: 2 0
>  domain 1: span 0-3 level CPU
>   groups: 0,2 1,3
>CPU3 attaching sched-domain:
> domain 0: span 1,3 level SIBLING
>  groups: 3 1
>  domain 1: span 0-3 level CPU
>   groups: 1,3 0,2
>Booting paravirtualized kernel on bare hardware
>regulator: core version 0.5
>Time: 11:15:46  Date: 11/30/09
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfbdd5, last bus=5
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:00.0: reg 10 32bit mmio: [0xe8000000-0xefffffff]
>pci 0000:00:01.0: reg 10 32bit mmio: [0xe0000000-0xe7ffffff]
>pci 0000:00:1d.0: reg 20 io port: [0xff80-0xff9f]
>pci 0000:00:1d.1: reg 20 io port: [0xff60-0xff7f]
>pci 0000:00:1d.2: reg 20 io port: [0xff40-0xff5f]
>pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe700800-0xfe700bff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>* The chipset may have PM-Timer Bug. Due to workarounds for a bug,
>* this clock source is slow. If you are sure your timer does not have
>* this bug, please use "acpi_pm_good" to disable the workaround
>pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH4 GPIO
>pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
>pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
>pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
>pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
>pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
>pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
>pci 0000:00:1f.3: reg 20 io port: [0xdc80-0xdc9f]
>pci 0000:00:1f.5: reg 10 io port: [0xd800-0xd8ff]
>pci 0000:00:1f.5: reg 14 io port: [0xdc40-0xdc7f]
>pci 0000:00:1f.5: reg 18 32bit mmio: [0xfe700400-0xfe7005ff]
>pci 0000:00:1f.5: reg 1c 32bit mmio: [0xfe700000-0xfe7000ff]
>pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
>pci 0000:00:1f.5: PME# disabled
>pci 0000:01:00.0: reg 10 32bit mmio: [0xfc000000-0xfcffffff]
>pci 0000:01:00.0: reg 14 32bit mmio: [0xf0000000-0xf7ffffff]
>pci 0000:01:00.0: reg 30 32bit mmio: [0xc1000000-0xc101ffff]
>pci 0000:00:01.0: bridge 32bit mmio: [0xfc000000-0xfdffffff]
>pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff]
>pci 0000:02:1c.0: reg 10 32bit mmio: [0xfe3ff000-0xfe3fffff]
>pci 0000:02:1e.0: reg 10 32bit mmio: [0xfe3fe000-0xfe3fefff]
>pci 0000:00:02.0: bridge io port: [0xe000-0xefff]
>pci 0000:00:02.0: bridge 32bit mmio: [0xfe300000-0xfe6fffff]
>pci 0000:03:0e.0: reg 10 64bit mmio: [0xfe5e0000-0xfe5fffff]
>pci 0000:03:0e.0: reg 20 io port: [0xecc0-0xecff]
>pci 0000:03:0e.0: PME# supported from D0 D3hot D3cold
>pci 0000:03:0e.0: PME# disabled
>pci 0000:02:1d.0: bridge io port: [0xe000-0xefff]
>pci 0000:02:1d.0: bridge 32bit mmio: [0xfe500000-0xfe6fffff]
>pci 0000:05:0c.0: reg 10 32bit mmio: [0xfe1ff800-0xfe1fffff]
>pci 0000:05:0c.0: reg 14 32bit mmio: [0xfe1f8000-0xfe1fbfff]
>pci 0000:05:0c.0: supports D1 D2
>pci 0000:05:0c.0: PME# supported from D0 D1 D2 D3hot
>pci 0000:05:0c.0: PME# disabled
>pci 0000:00:1e.0: transparent bridge
>pci 0000:00:1e.0: bridge 32bit mmio: [0xfe100000-0xfe2fffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1.PCI2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1.PCI3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: old code would have set cacheline size to 128 bytes, but clflush_size = 64
>PCI: pci_cache_line_size set to 64 bytes
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:0b: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling
>pnp 00:0b: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:00: iomem range 0x0-0x9ffff could not be reserved
>system 00:00: iomem range 0x100000-0xffffff could not be reserved
>system 00:00: iomem range 0x1000000-0x7ff74fff could not be reserved
>system 00:00: iomem range 0xf0000-0xfffff could not be reserved
>system 00:00: iomem range 0xfec00000-0xfec8ffff could not be reserved
>system 00:00: iomem range 0xfee00000-0xfee0ffff has been reserved
>system 00:00: iomem range 0xffb00000-0xffbfffff has been reserved
>system 00:00: iomem range 0xffc00000-0xffffffff has been reserved
>system 00:0b: ioport range 0xc00-0xc7f has been reserved
>pci 0000:01:00.0: BAR 6: no parent found for of device [0xc1000000-0xc101ffff]
>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:01.0:   IO window: disabled
>pci 0000:00:01.0:   MEM window: 0xfc000000-0xfdffffff
>pci 0000:00:01.0:   PREFETCH window: 0xf0000000-0xf7ffffff
>pci 0000:02:1d.0: PCI bridge, secondary bus 0000:03
>pci 0000:02:1d.0:   IO window: 0xe000-0xefff
>pci 0000:02:1d.0:   MEM window: 0xfe500000-0xfe6fffff
>pci 0000:02:1d.0:   PREFETCH window: disabled
>pci 0000:02:1f.0: PCI bridge, secondary bus 0000:04
>pci 0000:02:1f.0:   IO window: disabled
>pci 0000:02:1f.0:   MEM window: disabled
>pci 0000:02:1f.0:   PREFETCH window: disabled
>pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:02.0:   IO window: 0xe000-0xefff
>pci 0000:00:02.0:   MEM window: 0xfe300000-0xfe6fffff
>pci 0000:00:02.0:   PREFETCH window: disabled
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
>pci 0000:00:1e.0:   IO window: disabled
>pci 0000:00:1e.0:   MEM window: 0xfe100000-0xfe2fffff
>pci 0000:00:1e.0:   PREFETCH window: disabled
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:01: resource 1 mem: [0xfc000000-0xfdffffff]
>pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf7ffffff]
>pci_bus 0000:02: resource 0 io:  [0xe000-0xefff]
>pci_bus 0000:02: resource 1 mem: [0xfe300000-0xfe6fffff]
>pci_bus 0000:03: resource 0 io:  [0xe000-0xefff]
>pci_bus 0000:03: resource 1 mem: [0xfe500000-0xfe6fffff]
>pci_bus 0000:05: resource 1 mem: [0xfe100000-0xfe2fffff]
>pci_bus 0000:05: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 10659k freed
>Simple Boot Flag value 0x87 read from CMOS RAM was invalid
>Simple Boot Flag at 0x7a set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1259579746.074:1): initialized
>highmem bounce pool size: 64 pages
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1703
>SELinux:  Registering netfilter hooks
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:01:00.0: Boot video device
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>acpiphp_glue: can't get bus number, assuming 0
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button [PWRF]
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>ACPI: Power Button [VBTN]
>processor LNXCPU:00: registered as cooling_device0
>processor LNXCPU:01: registered as cooling_device1
>processor LNXCPU:02: registered as cooling_device2
>processor LNXCPU:03: registered as cooling_device3
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 3
>Switched to high resolution mode on CPU 2
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel E7505 Chipset
>agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>brd: module loaded
>loop: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input2
>ata_piix 0000:00:1f.1: version 2.13
>ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
>ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ata_piix 0000:00:1f.1: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
>Fixed MDIO Bus: probed
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe700800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.31.5-127.fc12.i686.PAE ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ff80
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.31.5-127.fc12.i686.PAE uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ff60
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.31.5-127.fc12.i686.PAE uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.31.5-127.fc12.i686.PAE uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>PNP: PS/2 Controller [PNP0f13:MOU] at 0x60,0x64 irq 12
>PNP: PS/2 controller doesn't have KBD irq; using default 1
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:05: RTC can wake from S4
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one day, 242 bytes nvram
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
>nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>PM: Resume from disk failed.
>registered taskstats version 1
>No TPM chip found, activating TPM-bypass!
>  Magic number: 1:172:278
>tty tty15: hash matches
>rtc_cmos 00:05: setting system clock to 2009-11-30 11:15:48 UTC (1259579748)
>Initalizing network drop monitor service
>ata2.00: ATAPI: JLMS DVD-ROM XJ-HD166, DD05, max UDMA/33
>ata2.00: configured for UDMA/33
>ata1.00: ATA-7: WDC WD1600AAJB-00PVA0, 00.07H00, max UDMA/100
>ata1.00: 312581808 sectors, multi 8: LBA48 
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600AAJB-0 00.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
>scsi 1:0:0:0: CD-ROM            JLMS     DVD-ROM XJ-HD166 DD05 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
> sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>Freeing unused kernel memory: 448k freed
>Write protecting the kernel text: 3572k
>Write protecting the kernel read-only data: 1716k
>psmouse serio1: ID: 10 00 64
>dracut: dracut-002-13.4.git8f397a9b.fc12
>udev: starting version 145
>[drm] Initialized drm 1.1.0 20060810
>usb 1-4: new high speed USB device using ehci_hcd and address 3
>nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[drm] nouveau 0000:01:00.0: Detected an NV17 generation card (0x018a00a3)
>[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
>usb 1-4: New USB device found, idVendor=0424, idProduct=2502
>usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 1-4: configuration #1 chosen from 1 choice
>hub 1-4:1.0: USB hub found
>hub 1-4:1.0: 2 ports detected
>[drm] nouveau 0000:01:00.0: ... appears to be valid
>[drm] nouveau 0000:01:00.0: BMP BIOS found
>[drm] nouveau 0000:01:00.0: BMP version 5.38
>[drm] nouveau 0000:01:00.0: Bios version 04.18.20.21
>[drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.2
>[drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 000088b8
>[drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00000000
>[drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02010310 000088b8
>[drm] nouveau 0000:01:00.0: Raw DCB entry 3: 04010312 00000000
>[drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x71CA
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x76D4
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x733F
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x79FA
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x7A17
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0x751E
>usb 2-2: new low speed USB device using uhci_hcd and address 2
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0x766F
>[TTM] Zone  kernel: Available graphics memory: 436212 kiB.
>[TTM] Zone highmem: Available graphics memory: 1030882 kiB.
>[drm] nouveau 0000:01:00.0: 64 MiB VRAM
>agpgart-intel 0000:00:00.0: AGP 3.0 bridge
>agpgart: modprobe tried to set rate=x12. Setting to AGP3 x8 mode.
>agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
>nouveau 0000:01:00.0: putting AGP V3 device into 8x mode
>[drm] nouveau 0000:01:00.0: 128 MiB GART (aperture)
>[drm] nouveau 0000:01:00.0: Allocating FIFO number 0
>[drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0
>[drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0
>[drm] nouveau 0000:01:00.0: Detected a DVI-I connector
>[drm] nouveau 0000:01:00.0: Detected a DVI-I connector
>[drm] nouveau 0000:01:00.0: Saving VGA fonts
>input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
>[drm] nouveau 0000:01:00.0: allocated 1920x1200 fb: 0x49000, bo f647ca00
>fbcon: nouveaufb (fb0) is primary device
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 3)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
>usb 2-2: New USB device found, idVendor=413c, idProduct=2105
>usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-2: Product: Dell USB Keyboard
>usb 2-2: Manufacturer: Dell
>usb 2-2: configuration #1 chosen from 1 choice
>[drm] nouveau 0000:01:00.0: vpll: n 43 m 1 log2p 2
>[drm] TMDS-8: set mode 1920x1200 1f
>input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input4
>generic-usb 0003:413C:2105.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-2/input0
>usb 1-4.1: new high speed USB device using ehci_hcd and address 4
>usb 1-4.1: New USB device found, idVendor=0424, idProduct=2602
>usb 1-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 1-4.1: configuration #1 chosen from 1 choice
>hub 1-4.1:1.0: USB hub found
>hub 1-4.1:1.0: 4 ports detected
>usb 1-4.1.1: new high speed USB device using ehci_hcd and address 5
>[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
>[drm] nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 1
>[drm] nouveau 0000:01:00.0: 0xDD81: Parsing digital output script table
>[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
>[drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
>usb 1-4.1.1: New USB device found, idVendor=0424, idProduct=2228
>usb 1-4.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-4.1.1: Product: Flash Card Reader
>usb 1-4.1.1: Manufacturer: Generic
>usb 1-4.1.1: SerialNumber: 26020128B005
>usb 1-4.1.1: configuration #1 chosen from 1 choice
>Console: switching to colour frame buffer device 240x75
>Initializing USB Mass Storage driver...
>scsi2 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 5
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>fb0: nouveaufb frame buffer device
>registered panic notifier
>[drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
>dracut: Starting plymouth daemon
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>dracut: Mounted root filesystem /dev/sda2
>dracut: Switching root
>udev: starting version 145
>i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>intel_rng: FWH not detected
>dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
>iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
>iTCO_wdt: No card detected
>usb-storage: device scan complete
>scsi 2:0:0:0: Direct-Access     Generic  Flash HS-CF      4.44 PQ: 0 ANSI: 0
>scsi 2:0:0:1: Direct-Access     Generic  Flash HS-COMBO   4.44 PQ: 0 ANSI: 0
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>sd 2:0:0:1: Attached scsi generic sg3 type 0
>sd 2:0:0:1: [sdc] Attached SCSI removable disk
>sd 2:0:0:0: [sdb] Attached SCSI removable disk
>parport_pc 00:0a: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>ppdev: user-space parallel port driver
>Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>Intel ICH 0000:00:1f.5: setting latency timer to 64
>firewire_ohci 0000:05:0c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>e1000 0000:03:0e.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
>firewire_ohci: Added fw-ohci device 0000:05:0c.0, OHCI version 1.10
>e1000: 0000:03:0e.0: e1000_probe: (PCI-X:100MHz:64-bit) 00:0d:56:c0:41:d0
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>intel8x0_measure_ac97_clock: measured 51228 usecs (2469 samples)
>intel8x0: clocking to 48000
>firewire_core: created device fw0: GUID 89ffffffffffff00, S400
>device-mapper: multipath: version 1.1.0 loaded
>EXT3 FS on sda2, internal journal
>microcode: CPU0 sig=0xf27, pf=0x2, revision=0x34
>platform microcode: firmware: requesting intel-ucode/0f-02-07
>microcode: CPU1 sig=0xf29, pf=0x2, revision=0xf
>platform microcode: firmware: requesting intel-ucode/0f-02-09
>microcode: CPU2 sig=0xf27, pf=0x2, revision=0x34
>platform microcode: firmware: requesting intel-ucode/0f-02-07
>microcode: CPU3 sig=0xf29, pf=0x2, revision=0xf
>platform microcode: firmware: requesting intel-ucode/0f-02-09
>Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>microcode: CPU0 updated to revision 0x38, date = 2003-06-04 
>microcode: CPU1 updated to revision 0x2d, date = 2004-08-11 
>microcode: CPU2 updated to revision 0x38, date = 2003-06-04 
>microcode: CPU3 updated to revision 0x2d, date = 2004-08-11 
>Microcode Update Driver: v2.00 removed.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>eth0: no IPv6 routers present
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>[drm] nouveau 0000:01:00.0: Allocating FIFO number 1
>[drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU2 attaching NULL sched-domain.
>CPU3 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 0,2 level SIBLING
>  groups: 0 2
>  domain 1: span 0-3 level CPU
>   groups: 0,2 1,3
>CPU1 attaching sched-domain:
> domain 0: span 1,3 level SIBLING
>  groups: 1 3
>  domain 1: span 0-3 level CPU
>   groups: 1,3 0,2
>CPU2 attaching sched-domain:
> domain 0: span 0,2 level SIBLING
>  groups: 2 0
>  domain 1: span 0-3 level CPU
>   groups: 0,2 1,3
>CPU3 attaching sched-domain:
> domain 0: span 1,3 level SIBLING
>  groups: 3 1
>  domain 1: span 0-3 level CPU
>   groups: 1,3 0,2
>type=1305 audit(1259579801.658:22868): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 subj=kernel res=1
>Slow work thread pool: Starting up
>Slow work thread pool: Ready
>FS-Cache: Loaded
>FS-Cache: Netfs 'nfs' registered for caching
>fuse init (API version 7.12)
>Bluetooth: Core ver 2.15
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.13
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM ver 1.11
>i2c /dev entries driver
>[drm] nouveau 0000:01:00.0: PGRAPH_ERROR - nSource: PROTECTION_ERROR, nStatus: INVALID_STATE
>[drm] nouveau 0000:01:00.0: PGRAPH_ERROR - Ch 1/0 Class 0x0039 Mthd 0x0184 Data 0x000011ce:0x000011ce
>[drm] nouveau 0000:01:00.0: PGRAPH_ERROR - nSource: ILLEGAL_MTHD, nStatus: INVALID_STATE PROTECTION_FAULT
>[drm] nouveau 0000:01:00.0: PGRAPH_ERROR - Ch 1/0 Class 0x0039 Mthd 0x0310 Data 0x00001000:0x02a91000
>[drm] nouveau 0000:01:00.0: PGRAPH_ERROR - nSource: ILLEGAL_MTHD, nStatus: INVALID_STATE PROTECTION_FAULT
>[drm] nouveau 0000:01:00.0: PGRAPH_ERROR - Ch 1/0 Class 0x0039 Mthd 0x0314 Data 0x00001000:0x00001000
>[drm] nouveau 0000:01:00.0: PGRAPH_ERROR - nSource: ILLEGAL_MTHD, nStatus: INVALID_STATE PROTECTION_FAULT
>[drm] nouveau 0000:01:00.0: PGRAPH_ERROR - Ch 1/0 Class 0x0039 Mthd 0x0318 Data 0x00001000:0x00001000
>[drm] nouveau 0000:01:00.0: PGRAPH_ERROR - nSource: ILLEGAL_MTHD, nStatus: INVALID_STATE PROTECTION_FAULT
>[drm] nouveau 0000:01:00.0: PGRAPH_ERROR - Ch 1/0 Class 0x0039 Mthd 0x031c Data 0x00001000:0x00001000
>[drm] nouveau 0000:01:00.0: PGRAPH_ERROR - nSource: ILLEGAL_MTHD, nStatus: INVALID_STATE PROTECTION_FAULT
>[drm] nouveau 0000:01:00.0: PGRAPH_ERROR - Ch 1/0 Class 0x0039 Mthd 0x0320 Data 0x00000101:0x000007ff
>[drm] nouveau 0000:01:00.0: PGRAPH_ERROR - nSource: ILLEGAL_MTHD, nStatus: INVALID_STATE PROTECTION_FAULT
>[drm] nouveau 0000:01:00.0: PGRAPH_ERROR - Ch 1/0 Class 0x0039 Mthd 0x0324 Data 0x00000101:0x00000101
>[drm] nouveau 0000:01:00.0: PGRAPH_ERROR - nSource: ILLEGAL_MTHD, nStatus: INVALID_STATE PROTECTION_FAULT
>[drm] nouveau 0000:01:00.0: PGRAPH_ERROR - Ch 1/0 Class 0x0039 Mthd 0x0328 Data 0x00000000:0x00000000
>[drm] nouveau 0000:01:00.0: PGRAPH_ERROR - nSource: ILLEGAL_MTHD, nStatus: INVALID_STATE PROTECTION_FAULT
>[drm] nouveau 0000:01:00.0: PGRAPH_ERROR - Ch 1/0 Class 0x0039 Mthd 0x0310 Data 0x00001000:0x03290000
>[drm] nouveau 0000:01:00.0: PGRAPH_ERROR - nSource: ILLEGAL_MTHD, nStatus: INVALID_STATE PROTECTION_FAULT
>[drm] nouveau 0000:01:00.0: PGRAPH_ERROR - Ch 1/0 Class 0x0039 Mthd 0x0314 Data 0x00001000:0x00001000
>[drm] nouveau 0000:01:00.0: PGRAPH_ERROR - nSource: ILLEGAL_MTHD, nStatus: INVALID_STATE PROTECTION_FAULT
>[drm] nouveau 0000:01:00.0: PGRAPH_ERROR - Ch 1/0 Class 0x0039 Mthd 0x0318 Data 0x00001000:0x00001000
>[drm] nouveau 0000:01:00.0: PGRAPH_ERROR - nSource: ILLEGAL_MTHD, nStatus: INVALID_STATE PROTECTION_FAULT
>[drm] nouveau 0000:01:00.0: PGRAPH_ERROR - Ch 1/0 Class 0x0039 Mthd 0x031c Data 0x00001000:0x00001000
>[drm] nouveau 0000:01:00.0: PGRAPH_ERROR - nSource: ILLEGAL_MTHD, nStatus: INVALID_STATE PROTECTION_FAULT
>[drm] nouveau 0000:01:00.0: PGRAPH_ERROR - Ch 1/0 Class 0x0039 Mthd 0x0320 Data 0x00000101:0x000000cb
>[drm] nouveau 0000:01:00.0: PGRAPH_ERROR - nSource: ILLEGAL_MTHD, nStatus: INVALID_STATE PROTECTION_FAULT
>[drm] nouveau 0000:01:00.0: PGRAPH_ERROR - Ch 1/0 Class 0x0039 Mthd 0x0324 Data 0x00000000:0x00000101
>[drm] nouveau 0000:01:00.0: PGRAPH_ERROR - nSource: ILLEGAL_MTHD, nStatus: INVALID_STATE PROTECTION_FAULT
>[drm] nouveau 0000:01:00.0: PGRAPH_ERROR - Ch 1/0 Class 0x0039 Mthd 0x0328 Data 0x00000000:0x00000000

Actions: View

Attachments on bug 25366: 31600 | 31601

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.