Attachment 31690 Details for Bug 25408 – Kernel logs

[patch] Kernel logs

dmesg (text/plain), 29.99 KB, created by Dariem Pérez Herrera on 2009-12-02 15:48:41 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Dariem Pérez Herrera

Created: 2009-12-02 15:48:41 UTC

Size: 29.99 KB

patch

obsolete

>6.2, id: 0x25a0b1, caps: 0xa04713/0x200000
>PM: Adding info for No Bus:input2
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input2
>PM: Adding info for No Bus:mouse1
>PM: Adding info for No Bus:event2
>ahci 0000:00:12.0: version 3.0
>ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
>ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc 
>scsi2 : ahci
>PM: Adding info for scsi:host2
>PM: Adding info for No Bus:host2
>scsi3 : ahci
>PM: Adding info for scsi:host3
>PM: Adding info for No Bus:host3
>scsi4 : ahci
>PM: Adding info for scsi:host4
>PM: Adding info for No Bus:host4
>scsi5 : ahci
>PM: Adding info for scsi:host5
>PM: Adding info for No Bus:host5
>ata3: SATA max UDMA/133 abar m1024@0xd0004000 port 0xd0004100 irq 22
>ata4: SATA max UDMA/133 abar m1024@0xd0004000 port 0xd0004180 irq 22
>ata5: SATA max UDMA/133 abar m1024@0xd0004000 port 0xd0004200 irq 22
>ata6: SATA max UDMA/133 abar m1024@0xd0004000 port 0xd0004280 irq 22
>ata4: SATA link down (SStatus 0 SControl 300)
>ata5: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>ata3: softreset failed (device not ready)
>ata3: applying SB600 PMP SRST workaround and retrying
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: ATA-7: SAMSUNG HM120JI, YF100-13, max UDMA7
>ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
>ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
>ata3.00: configured for UDMA/133
>scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HM120JI  YF10 PQ: 0 ANSI: 5
>PM: Adding info for scsi:target2:0:0
>PM: Adding info for scsi:2:0:0:0
>PM: Adding info for No Bus:2:0:0:0
>PM: Adding info for No Bus:2:0:0:0
>PM: Adding info for No Bus:sg1
>sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>PM: Adding info for No Bus:sda
> sda:
>sd 2:0:0:0: Attached scsi generic sg1 type 0
> sda1 sda3 < sda5 sda6 sda7 sda8 sda9 >
>PM: Adding info for No Bus:sda1
>PM: Adding info for No Bus:sda3
>PM: Adding info for No Bus:sda5
>PM: Adding info for No Bus:sda6
>PM: Adding info for No Bus:sda7
>PM: Adding info for No Bus:sda8
>PM: Adding info for No Bus:sda9
>PM: Adding info for No Bus:8:0
>sd 2:0:0:0: [sda] Attached SCSI disk
>scsi: <fdomain> Detection failed (no card)
>GDT-HA: Storage RAID Controller Driver. Version: 3.05
>imm: Version 2.05 (for Linux 2.4.0)
>Fusion MPT base driver 3.04.12
>Copyright (c) 1999-2008 LSI Corporation
>Fusion MPT SPI Host driver 3.04.12
>Fusion MPT FC Host driver 3.04.12
>Fusion MPT SAS Host driver 3.04.12
>3ware Storage Controller device driver for Linux v1.26.02.002.
>3ware 9000 Storage Controller device driver for Linux v2.26.02.012.
>Compaq SMART2 Driver (v 2.6.0)
>HP CISS Driver (v 3.6.20)
>PM: Adding info for No Bus:dac960_gam
>Adaptec aacraid driver 1.1-5[2461]-ms
>megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
>PM: Adding info for No Bus:megadev0
>megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
>megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
>QLogic Fibre Channel HBA Driver: 8.03.01-k6
>Emulex LightPulse Fibre Channel SCSI driver 8.3.4
>Copyright(c) 2004-2009 Emulex.  All rights reserved.
>aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96
>ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:13.5: EHCI Host Controller
>drivers/usb/core/inode.c: creating file 'devices'
>drivers/usb/core/inode.c: creating file '001'
>ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:13.5: reset hcs_params 0x10520a dbg=1 cc=5 pcc=2 ordered !ppc ports=10
>ehci_hcd 0000:00:13.5: reset hcc_params a072 thresh 7 uframes 256/512/1024
>ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
>ehci_hcd 0000:00:13.5: debug port 1
>ehci_hcd 0000:00:13.5: reset command 080032 (park)=0 ithresh=8 Async Periodic period=1024 Reset HALT
>ehci_hcd 0000:00:13.5: MWI active
>ehci_hcd 0000:00:13.5: supports USB remote wakeup
>ehci_hcd 0000:00:13.5: irq 19, io mem 0xd0004400
>ehci_hcd 0000:00:13.5: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:13.5: init command 010009 (park)=0 ithresh=1 period=256 RUN
>ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
>usb usb1: default language 0x0409
>usb usb1: udev 1, busnum 1, minor = 0
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.32-rc8 ehci_hcd
>usb usb1: SerialNumber: 0000:00:13.5
>PM: Adding info for usb:usb1
>usb usb1: uevent
>usb usb1: usb_probe_device
>usb usb1: configuration #1 chosen from 1 choice
>usb usb1: adding 1-0:1.0 (config #1, interface 0)
>PM: Adding info for usb:1-0:1.0
>usb 1-0:1.0: uevent
>hub 1-0:1.0: usb_probe_interface
>hub 1-0:1.0: usb_probe_interface - got id
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>hub 1-0:1.0: standalone hub
>hub 1-0:1.0: no power switching (usb 1.0)
>hub 1-0:1.0: individual port over-current protection
>hub 1-0:1.0: power on to power good time: 20ms
>hub 1-0:1.0: local power source is good
>hub 1-0:1.0: trying to enable port power on non-switchable hub
>PM: Adding info for No Bus:ep_81
>PM: Adding info for No Bus:usbdev1.1
>drivers/usb/core/inode.c: creating file '001'
>PM: Adding info for No Bus:ep_00
>usbcore: registered new interface driver libusual
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>ehci_hcd 0000:00:13.5: GetStatus port 2 status 001403 POWER sig=k CSC CONNECT
>hub 1-0:1.0: port 2: status 0501 change 0001
>uhci_hcd: USB Universal Host Controller Interface driver
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd: block sizes: ed 64 td 64
>ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>drivers/usb/core/inode.c: creating file '002'
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.0: created debug files
>ohci_hcd 0000:00:13.0: irq 16, io mem 0xd0005000
>hub 1-0:1.0: state 7 ports 10 chg 0004 evt 0000
>hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
>ehci_hcd 0000:00:13.5: port 2 low speed --> companion
>ohci_hcd 0000:00:13.0: OHCI controller state
>ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers
>ohci_hcd 0000:00:13.0: control 0x083 HCFS=operational CBSR=3
>ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0
>ohci_hcd 0000:00:13.0: intrstatus 0x00000000
>ohci_hcd 0000:00:13.0: intrenable 0x8000001a MIE UE RD WDH
>ohci_hcd 0000:00:13.0: hcca frame #0000
>ohci_hcd 0000:00:13.0: roothub.a 00000202 POTPGT=0 NPS NDP=2(2)
>ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000
>ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE
>ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS
>ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00010301 CSC LSDA PPS CCS
>usb usb2: default language 0x0409
>usb usb2: udev 1, busnum 2, minor = 128
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.32-rc8 ohci_hcd
>usb usb2: SerialNumber: 0000:00:13.0
>PM: Adding info for usb:usb2
>usb usb2: uevent
>usb usb2: usb_probe_device
>usb usb2: configuration #1 chosen from 1 choice
>usb usb2: adding 2-0:1.0 (config #1, interface 0)
>PM: Adding info for usb:2-0:1.0
>usb 2-0:1.0: uevent
>hub 2-0:1.0: usb_probe_interface
>hub 2-0:1.0: usb_probe_interface - got id
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>hub 2-0:1.0: standalone hub
>hub 2-0:1.0: no power switching (usb 1.0)
>hub 2-0:1.0: global over-current protection
>hub 2-0:1.0: power on to power good time: 0ms
>hub 2-0:1.0: local power source is good
>hub 2-0:1.0: no over-current condition exists
>hub 2-0:1.0: trying to enable port power on non-switchable hub
>PM: Adding info for No Bus:ep_81
>PM: Adding info for No Bus:usbdev2.1
>drivers/usb/core/inode.c: creating file '001'
>PM: Adding info for No Bus:ep_00
>ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>drivers/usb/core/inode.c: creating file '003'
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:13.1: created debug files
>ohci_hcd 0000:00:13.1: irq 17, io mem 0xd0006000
>ehci_hcd 0000:00:13.5: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
>hub 1-0:1.0: state 7 ports 10 chg 0000 evt 0004
>ohci_hcd 0000:00:13.1: OHCI controller state
>ohci_hcd 0000:00:13.1: OHCI 1.0, NO legacy support registers
>ohci_hcd 0000:00:13.1: control 0x083 HCFS=operational CBSR=3
>ohci_hcd 0000:00:13.1: cmdstatus 0x00000 SOC=0
>ohci_hcd 0000:00:13.1: intrstatus 0x00000000
>ohci_hcd 0000:00:13.1: intrenable 0x8000001a MIE UE RD WDH
>ohci_hcd 0000:00:13.1: hcca frame #0000
>ohci_hcd 0000:00:13.1: roothub.a 00000202 POTPGT=0 NPS NDP=2(2)
>ohci_hcd 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000
>ohci_hcd 0000:00:13.1: roothub.status 00008000 DRWE
>ohci_hcd 0000:00:13.1: roothub.portstatus [0] 0x00000100 PPS
>ohci_hcd 0000:00:13.1: roothub.portstatus [1] 0x00000100 PPS
>usb usb3: default language 0x0409
>usb usb3: udev 1, busnum 3, minor = 256
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: OHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.32-rc8 ohci_hcd
>usb usb3: SerialNumber: 0000:00:13.1
>PM: Adding info for usb:usb3
>usb usb3: uevent
>usb usb3: usb_probe_device
>usb usb3: configuration #1 chosen from 1 choice
>usb usb3: adding 3-0:1.0 (config #1, interface 0)
>PM: Adding info for usb:3-0:1.0
>usb 3-0:1.0: uevent
>hub 3-0:1.0: usb_probe_interface
>hub 3-0:1.0: usb_probe_interface - got id
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>hub 3-0:1.0: standalone hub
>hub 3-0:1.0: no power switching (usb 1.0)
>hub 3-0:1.0: global over-current protection
>hub 3-0:1.0: power on to power good time: 0ms
>hub 3-0:1.0: local power source is good
>hub 3-0:1.0: no over-current condition exists
>hub 3-0:1.0: trying to enable port power on non-switchable hub
>PM: Adding info for No Bus:ep_81
>PM: Adding info for No Bus:usbdev3.1
>drivers/usb/core/inode.c: creating file '001'
>PM: Adding info for No Bus:ep_00
>ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.2: OHCI Host Controller
>drivers/usb/core/inode.c: creating file '004'
>ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:13.2: created debug files
>ohci_hcd 0000:00:13.2: irq 18, io mem 0xd0007000
>ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00010301 CSC LSDA PPS CCS
>hub 2-0:1.0: port 2: status 0301 change 0001
>ohci_hcd 0000:00:13.2: OHCI controller state
>ohci_hcd 0000:00:13.2: OHCI 1.0, NO legacy support registers
>ohci_hcd 0000:00:13.2: control 0x083 HCFS=operational CBSR=3
>ohci_hcd 0000:00:13.2: cmdstatus 0x00000 SOC=0
>ohci_hcd 0000:00:13.2: intrstatus 0x00000000
>ohci_hcd 0000:00:13.2: intrenable 0x8000001a MIE UE RD WDH
>ohci_hcd 0000:00:13.2: hcca frame #0000
>ohci_hcd 0000:00:13.2: roothub.a 00000202 POTPGT=0 NPS NDP=2(2)
>ohci_hcd 0000:00:13.2: roothub.b 00000000 PPCM=0000 DR=0000
>ohci_hcd 0000:00:13.2: roothub.status 00008000 DRWE
>ohci_hcd 0000:00:13.2: roothub.portstatus [0] 0x00000100 PPS
>ohci_hcd 0000:00:13.2: roothub.portstatus [1] 0x00000100 PPS
>usb usb4: default language 0x0409
>usb usb4: udev 1, busnum 4, minor = 384
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: OHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.32-rc8 ohci_hcd
>usb usb4: SerialNumber: 0000:00:13.2
>PM: Adding info for usb:usb4
>usb usb4: uevent
>usb usb4: usb_probe_device
>usb usb4: configuration #1 chosen from 1 choice
>usb usb4: adding 4-0:1.0 (config #1, interface 0)
>PM: Adding info for usb:4-0:1.0
>usb 4-0:1.0: uevent
>hub 4-0:1.0: usb_probe_interface
>hub 4-0:1.0: usb_probe_interface - got id
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>hub 4-0:1.0: standalone hub
>hub 4-0:1.0: no power switching (usb 1.0)
>hub 4-0:1.0: global over-current protection
>hub 4-0:1.0: power on to power good time: 0ms
>hub 4-0:1.0: local power source is good
>hub 4-0:1.0: no over-current condition exists
>hub 4-0:1.0: trying to enable port power on non-switchable hub
>PM: Adding info for No Bus:ep_81
>PM: Adding info for No Bus:usbdev4.1
>drivers/usb/core/inode.c: creating file '001'
>PM: Adding info for No Bus:ep_00
>ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ohci_hcd 0000:00:13.3: OHCI Host Controller
>drivers/usb/core/inode.c: creating file '005'
>ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
>ohci_hcd 0000:00:13.3: created debug files
>ohci_hcd 0000:00:13.3: irq 17, io mem 0xd0008000
>hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
>ohci_hcd 0000:00:13.3: OHCI controller state
>ohci_hcd 0000:00:13.3: OHCI 1.0, NO legacy support registers
>ohci_hcd 0000:00:13.3: control 0x083 HCFS=operational CBSR=3
>ohci_hcd 0000:00:13.3: cmdstatus 0x00000 SOC=0
>ohci_hcd 0000:00:13.3: intrstatus 0x00000000
>ohci_hcd 0000:00:13.3: intrenable 0x8000001a MIE UE RD WDH
>ohci_hcd 0000:00:13.3: hcca frame #0000
>ohci_hcd 0000:00:13.3: roothub.a 00000202 POTPGT=0 NPS NDP=2(2)
>ohci_hcd 0000:00:13.3: roothub.b 00000000 PPCM=0000 DR=0000
>ohci_hcd 0000:00:13.3: roothub.status 00008000 DRWE
>ohci_hcd 0000:00:13.3: roothub.portstatus [0] 0x00000100 PPS
>ohci_hcd 0000:00:13.3: roothub.portstatus [1] 0x00000100 PPS
>usb usb5: default language 0x0409
>usb usb5: udev 1, busnum 5, minor = 512
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: OHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.32-rc8 ohci_hcd
>usb usb5: SerialNumber: 0000:00:13.3
>PM: Adding info for usb:usb5
>usb usb5: uevent
>usb usb5: usb_probe_device
>usb usb5: configuration #1 chosen from 1 choice
>usb usb5: adding 5-0:1.0 (config #1, interface 0)
>PM: Adding info for usb:5-0:1.0
>usb 5-0:1.0: uevent
>hub 5-0:1.0: usb_probe_interface
>hub 5-0:1.0: usb_probe_interface - got id
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>hub 5-0:1.0: standalone hub
>hub 5-0:1.0: no power switching (usb 1.0)
>hub 5-0:1.0: global over-current protection
>hub 5-0:1.0: power on to power good time: 0ms
>hub 5-0:1.0: local power source is good
>hub 5-0:1.0: no over-current condition exists
>hub 5-0:1.0: trying to enable port power on non-switchable hub
>PM: Adding info for No Bus:ep_81
>PM: Adding info for No Bus:usbdev5.1
>drivers/usb/core/inode.c: creating file '001'
>PM: Adding info for No Bus:ep_00
>ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.4: OHCI Host Controller
>drivers/usb/core/inode.c: creating file '006'
>ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
>ohci_hcd 0000:00:13.4: created debug files
>ohci_hcd 0000:00:13.4: irq 18, io mem 0xd0009000
>hub 2-0:1.0: state 7 ports 2 chg 0004 evt 0000
>hub 2-0:1.0: port 2, status 0301, change 0000, 1.5 Mb/s
>ohci_hcd 0000:00:13.4: OHCI controller state
>ohci_hcd 0000:00:13.4: OHCI 1.0, NO legacy support registers
>ohci_hcd 0000:00:13.4: control 0x083 HCFS=operational CBSR=3
>ohci_hcd 0000:00:13.4: cmdstatus 0x00000 SOC=0
>ohci_hcd 0000:00:13.4: intrstatus 0x00000000
>ohci_hcd 0000:00:13.4: intrenable 0x8000001a MIE UE RD WDH
>ohci_hcd 0000:00:13.4: hcca frame #0000
>ohci_hcd 0000:00:13.4: roothub.a 00000202 POTPGT=0 NPS NDP=2(2)
>ohci_hcd 0000:00:13.4: roothub.b 00000000 PPCM=0000 DR=0000
>ohci_hcd 0000:00:13.4: roothub.status 00008000 DRWE
>ohci_hcd 0000:00:13.4: roothub.portstatus [0] 0x00000100 PPS
>ohci_hcd 0000:00:13.4: roothub.portstatus [1] 0x00000100 PPS
>usb usb6: default language 0x0409
>usb usb6: udev 1, busnum 6, minor = 640
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: OHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.32-rc8 ohci_hcd
>usb usb6: SerialNumber: 0000:00:13.4
>PM: Adding info for usb:usb6
>usb usb6: uevent
>usb usb6: usb_probe_device
>usb usb6: configuration #1 chosen from 1 choice
>usb usb6: adding 6-0:1.0 (config #1, interface 0)
>PM: Adding info for usb:6-0:1.0
>usb 6-0:1.0: uevent
>hub 6-0:1.0: usb_probe_interface
>hub 6-0:1.0: usb_probe_interface - got id
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>hub 6-0:1.0: standalone hub
>hub 6-0:1.0: no power switching (usb 1.0)
>hub 6-0:1.0: global over-current protection
>hub 6-0:1.0: power on to power good time: 0ms
>hub 6-0:1.0: local power source is good
>hub 6-0:1.0: no over-current condition exists
>hub 6-0:1.0: trying to enable port power on non-switchable hub
>PM: Adding info for No Bus:ep_81
>PM: Adding info for No Bus:usbdev6.1
>drivers/usb/core/inode.c: creating file '001'
>PM: Adding info for No Bus:ep_00
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
>sl811: driver sl811-hcd, 19 May 2005
>usb 2-2: new low speed USB device using ohci_hcd and address 2
>ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
>usb 2-2: skipped 1 descriptor after interface
>usb 2-2: default language 0x0409
>usb 2-2: udev 2, busnum 2, minor = 129
>usb 2-2: New USB device found, idVendor=15d9, idProduct=0a37
>usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>usb 2-2: Product: USB Mouse
>PM: Adding info for usb:2-2
>usb 2-2: uevent
>usb 2-2: usb_probe_device
>usb 2-2: configuration #1 chosen from 1 choice
>usb 2-2: adding 2-2:1.0 (config #1, interface 0)
>PM: Adding info for usb:2-2:1.0
>usb 2-2:1.0: uevent
>usbhid 2-2:1.0: usb_probe_interface
>usbhid 2-2:1.0: usb_probe_interface - got id
>PM: Adding info for hid:0003:15D9:0A37.0001
>PM: Adding info for No Bus:input3
>input: USB Mouse as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/input/input3
>PM: Adding info for No Bus:mouse2
>PM: Adding info for No Bus:event3
>PM: Adding info for No Bus:hidraw0
>generic-usb 0003:15D9:0A37.0001: input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:13.0-2/input0
>PM: Adding info for No Bus:ep_81
>PM: Adding info for No Bus:usbdev2.2
>drivers/usb/core/inode.c: creating file '002'
>PM: Adding info for No Bus:ep_00
>hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0004
>hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
>device-mapper: uevent: version 1.0.3
>PM: Adding info for No Bus:device-mapper
>device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
>md: raid10 personality registered for level 10
>JFS: nTxBlock = 7010, nTxLock = 56085
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
>SGI XFS Quota Management subsystem
>fuse init (API version 7.13)
>PM: Adding info for No Bus:fuse
>Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>ohci_hcd 0000:00:13.1: auto-stop root hub
>ohci_hcd 0000:00:13.2: auto-stop root hub
>ohci_hcd 0000:00:13.3: auto-stop root hub
>ohci_hcd 0000:00:13.4: auto-stop root hub
>EXT3-fs: sda7: couldn't mount because of unsupported optional features (40).
>EXT2-fs: sda7: couldn't mount because of unsupported optional features (40).
>EXT4-fs (sda7): mounted filesystem with ordered data mode
>udev: starting version 146
>usb usb2: uevent
>usb 2-0:1.0: uevent
>usb 2-2: uevent
>usb 2-2:1.0: uevent
>usb usb3: uevent
>usb 3-0:1.0: uevent
>usb usb4: uevent
>usb 4-0:1.0: uevent
>usb usb5: uevent
>usb 5-0:1.0: uevent
>usb usb6: uevent
>usb 6-0:1.0: uevent
>usb usb1: uevent
>usb 1-0:1.0: uevent
>PM: Adding info for No Bus:input4
>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
>PM: Adding info for No Bus:event4
>ACPI: Power Button [PWRB]
>PM: Adding info for No Bus:input5
>input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
>PM: Adding info for No Bus:event5
>ACPI: Lid Switch [LID0]
>PM: Adding info for No Bus:input6
>input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6
>PM: Adding info for No Bus:event6
>ACPI: Sleep Button [SLPB]
>PM: Adding info for No Bus:input7
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
>PM: Adding info for No Bus:event7
>ACPI: Power Button [PWRF]
>PM: Adding info for No Bus:BAT1
>ACPI: Battery Slot [BAT1] (battery present)
>usb usb1: uevent
>usb usb6: uevent
>usb usb5: uevent
>usb usb2: uevent
>usb usb3: uevent
>usb usb4: uevent
>PM: Adding info for No Bus:ADP1
>ACPI: AC Adapter [ADP1] (on-line)
>PM: Adding info for No Bus:input8
>input: PC Speaker as /devices/platform/pcspkr/input/input8
>PM: Adding info for No Bus:event8
>PM: Adding info for No Bus:thermal_zone0
>PM: Adding info for No Bus:hwmon0
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [TZ00] (54 C)
>PM: Adding info for No Bus:thermal_zone1
>thermal LNXTHERM:02: registered as thermal_zone1
>ACPI: Thermal Zone [TZ01] (54 C)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>usb 2-2: uevent
>usb usb1: uevent
>usb usb4: uevent
>usb usb2: uevent
>usb usb3: uevent
>usb usb6: uevent
>usb usb5: uevent
>usb 2-2:1.0: uevent
>usb 2-2: uevent
>usb 2-2:1.0: uevent
>usb 2-2: uevent
>usb 2-2: uevent
>usb 2-2:1.0: uevent
>usb 2-2:1.0: uevent
>ricoh-mmc: Ricoh MMC Controller disabling driver
>ricoh-mmc: Copyright(c) Philip Langdale
>ricoh-mmc: Ricoh MMC controller found at 0000:02:09.2 [1180:0843] (rev 0)
>ricoh-mmc: Controller is now disabled.
>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>8139cp 0000:02:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
>PM: Adding info for No Bus:cooling_device0
>fan PNP0C0B:00: registered as cooling_device0
>ACPI: Fan [FAN0] (off)
>[Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>PM: Adding info for No Bus:acpi_video0
>PM: Adding info for No Bus:cooling_device1
>acpi device:1c: registered as cooling_device1
>PM: Adding info for No Bus:acpi_video0
>PM: Adding info for No Bus:input9
>input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1a/LNXVIDEO:00/input/input9
>PM: Adding info for No Bus:event9
>ACPI: Video Device [ATIM] (multi-head: yes  rom: no  post: no)
>Marking TSC unstable due to TSC halts in idle
>PM: Adding info for No Bus:cooling_device2
>processor LNXCPU:00: registered as cooling_device2
>Switching to clocksource hpet
>Linux agpgart interface v0.103
>Driver 'rtc_cmos' needs updating - please use bus_type methods
>PM: Adding info for No Bus:rtc0
>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
>PM: Adding info for No Bus:rfkill
>yenta_cardbus 0000:02:09.0: CardBus bridge found [144d:c036]
>yenta_cardbus 0000:02:09.0: ISA IRQ mask 0x0cb8, PCI irq 20
>yenta_cardbus 0000:02:09.0: Socket status: 30000006
>yenta_cardbus 0000:02:09.0: pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
>yenta_cardbus 0000:02:09.0: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
>yenta_cardbus 0000:02:09.0: pcmcia: parent PCI bridge Memory window: 0x38000000 - 0x3bffffff
>PM: Adding info for No Bus:pcmcia_socket0
>PM: Adding info for No Bus:timer
>PM: Adding info for platform:regulatory.0
>cfg80211: Using static regulatory domain info
>cfg80211: Regulatory domain: US
>	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>	(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
>	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
>cfg80211: Calling CRDA for country: US
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>8139too Fast Ethernet driver 0.9.28
>8139too 0000:02:05.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>PM: Adding info for No Bus:eth0
>eth0: RealTek RTL8139 at 0xf9754000, 00:13:77:36:a7:22, IRQ 23
>sdhci-pci 0000:02:09.1: SDHCI controller found [1180:0822] (rev 18)
>sdhci-pci 0000:02:09.1: found 1 slot(s)
>sdhci-pci 0000:02:09.1: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>sdhci-pci 0000:02:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>sdhci: ============== REGISTER DUMP ==============
>sdhci: Sys addr: 0x00000000 | Version:  0x00000200
>sdhci: Blk size: 0x00000000 | Blk cnt:  0x00000000
>sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
>sdhci: Present:  0x01f20000 | Host ctl: 0x00000000
>sdhci: Power:    0x00000000 | Blk gap:  0x00000000
>sdhci: Wake-up:  0x00000000 | Clock:    0x00004000
>sdhci: Timeout:  0x00000000 | Int stat: 0x00000000
>sdhci: Int enab: 0x00ff0003 | Sig enab: 0x00ff0003
>sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
>sdhci: Caps:     0x01c021a1 | Max curr: 0x00000040
>sdhci: ===========================================
>PM: Adding info for No Bus:mmc0::
>Registered led device: mmc0::
>PM: Adding info for No Bus:mmc0
>mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
>mmc0: clock 0Hz busmode 1 powermode 1 cs 0 Vdd 21 width 0 timing 0
>mmc0: SDHCI controller on PCI [0000:02:09.1] using DMA
>mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
>mmc0: clock 400000Hz busmode 1 powermode 2 cs 1 Vdd 21 width 0 timing 0
>mmc0: starting CMD0 arg 00000000 flags 000000c0
>mmc0: req done (CMD0): -123: 00000000 00000000 00000000 00000000
>mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
>mmc0: starting CMD8 arg 000001aa flags 000002f5
>mmc0: req done (CMD8): -123: 00000000 00000000 00000000 00000000
>mmc0: starting CMD5 arg 00000000 flags 000002e1
>mmc0: req failed (CMD5): -123, retrying...
>mmc0: req failed (CMD5): -123, retrying...
>mmc0: req failed (CMD5): -123, retrying...
>mmc0: req done (CMD5): -123: 00000000 00000000 00000000 00000000
>mmc0: starting CMD55 arg 00000000 flags 000000f5
>mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
>mmc0: starting CMD55 arg 00000000 flags 000000f5
>mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
>mmc0: starting CMD55 arg 00000000 flags 000000f5
>mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
>mmc0: starting CMD55 arg 00000000 flags 000000f5
>mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
>mmc0: starting CMD1 arg 00000000 flags 000000e1
>mmc0: req done (CMD1): -123: 00000000 00000000 00000000 00000000
>mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
>piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8410, revision 0
>PM: Adding info for i2c:i2c-0
>[drm] Initialized drm 1.1.0 20060810
>ath5k 0000:02:07.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>ath5k 0000:02:07.0: registered as 'phy0'
>PM: Adding info for No Bus:ttm
>HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ath: EEPROM regdomain: 0x65
>ath: EEPROM indicates we should expect a direct regpair map
>ath: Country alpha2 being used: 00
>ath: Regpair used: 0x65
>PM: Adding info for No Bus:phy0
>PM: Adding info for No Bus:rfkill0
>PM: Adding info for No Bus:card0
>PM: Adding info for No Bus:pcmC0D0p
>PM: Adding info for No Bus:pcmC0D0c
>PM: Adding info for No Bus:hwC0D3
>PM: Adding info for No Bus:hwC0D1
>PM: Adding info for No Bus:controlC0
>[drm] radeon defaulting to kernel modesetting.
>[drm] radeon kernel modesetting enabled.
>radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>PM: Adding info for No Bus:controlD64
>PM: Adding info for No Bus:card0
>[drm] radeon: Initializing kernel modesetting.
>[drm] register mmio base: 0xD0100000
>[drm] register mmio size: 65536
>ATOM BIOS: ATI
>[drm] GPU reset succeed (RBBM_STATUS=0x10000140)
>[drm] radeon: VRAM 0M
>[drm] radeon: VRAM from 0x00000000 to 0xFFFFFFFF
>[drm] radeon: GTT 512M
>[drm] radeon: GTT from 0x00000000 to 0x1FFFFFFF
>radeon 0000:01:05.0: irq 24 for MSI/MSI-X
>[drm] radeon: irq initialized.
>mtrr: zero sized request
>[drm] Detected VRAM RAM=0M, BAR=0M
>[drm] RAM width 128bits DDR
>[TTM] Zone  kernel: Available graphics memory: 445316 kiB.
>[TTM] Zone highmem: Available graphics memory: 448680 kiB.
>[TTM] Zero size memory manager type 2
>[TTM] Failed moving buffer. Proposed placement 0x00060004
>[drm:radeon_object_create] *ERROR* Failed to allocate TTM object (262144, 0x00060004, 0)
>[drm:radeon_driver_load_kms] *ERROR* Fatal error while trying to initialize radeon.
>PM: Removing info for No Bus:card0
>PM: Removing info for No Bus:controlD64
>radeon: probe of 0000:01:05.0 failed with error -22
>phy0: Selected rate control algorithm 'minstrel'
>PM: Adding info for No Bus:wlan0
>ath5k phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45)
>PM: Adding info for No Bus:vcs2
>PM: Adding info for No Bus:vcsa2
>PM: Adding info for No Bus:vcs3
>PM: Adding info for No Bus:vcsa3
>PM: Adding info for No Bus:vcs4
>PM: Adding info for No Bus:vcsa4
>PM: Adding info for No Bus:vcs5
>PM: Adding info for No Bus:vcsa5
>PM: Adding info for No Bus:vcs6
>PM: Adding info for No Bus:vcsa6
>PM: Adding info for No Bus:vcs7
>PM: Adding info for No Bus:vcsa7
>PM: Adding info for No Bus:vcs8
>PM: Adding info for No Bus:vcsa8
>PM: Adding info for No Bus:vcs9
>PM: Adding info for No Bus:vcsa9
>PM: Adding info for No Bus:vcs10
>PM: Adding info for No Bus:vcsa10
>PM: Adding info for No Bus:vcs11
>PM: Adding info for No Bus:vcsa11
>PM: Adding info for No Bus:vcs12
>PM: Adding info for No Bus:vcsa12
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>PM: Adding info for No Bus:tun
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda8, internal journal
>EXT3-fs: mounted filesystem with writeback data mode.
>PM: Adding info for No Bus:8:1-fuseblk
>Adding 1068280k swap on /dev/sda5.  Priority:-1 extents:1 across:1068280k

Actions: View | Splinter Review

Attachments on bug 25408: 31688 | 31689 | 31690 | 31713 | 31770 | 31792 | 31793 | 31796 | 31797 | 31798 | 31799 | 35157 | 35202 | 35204

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.