Attachment 35854 Details for Bug 28238 – dmesg output

dmesg output

dmesg (text/plain), 40.13 KB, created by Jason Wigg on 2010-05-25 13:37:33 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jason Wigg

Created: 2010-05-25 13:37:33 UTC

Size: 40.13 KB

patch

obsolete

>Linux version 2.6.33-zen2 (root@Andornor) (gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #1 ZEN SMP Sat May 1 14:32:33 EST 2010
>Command line: root=/dev/sda2 quiet data=ordered
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
> BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000ce000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000077e70000 (usable)
> BIOS-e820: 0000000077e70000 - 0000000077e80000 (ACPI data)
> BIOS-e820: 0000000077e80000 - 0000000077f00000 (ACPI NVS)
> BIOS-e820: 0000000077f00000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>NX (Execute Disable) protection: active
>DMI present.
>No AGP bridge found
>last_pfn = 0x77e70 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-CFFFF write-protect
>  D0000-E3FFF uncachable
>  E4000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 0000000000 mask FF80000000 write-back
>  1 base 0078000000 mask FFF8000000 uncachable
>  2 disabled
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>initial memory mapped : 0 - 20000000
>found SMP MP-table at [ffff8800000f8530] f8530
>init_memory_mapping: 0000000000000000-0000000077e70000
> 0000000000 - 0077e00000 page 2M
> 0077e00000 - 0077e70000 page 4k
>kernel direct mapping tables up to 77e70000 @ 8000-c000
>ACPI: RSDP 00000000000f8500 00014 (v00 PTLTD )
>ACPI: RSDT 0000000077e7957b 00040 (v01 DELL    M08     06040000  LTP 00000000)
>ACPI: FACP 0000000077e7fb9a 00074 (v01 ATI    Bowfin   06040000 ATI  000F4240)
>ACPI: DSDT 0000000077e795bb 065DF (v01    ATI    SB600 06040000 MSFT 03000000)
>ACPI: FACS 0000000077e90fc0 00040
>ACPI: TCPA 0000000077e7fc0e 00032 (v02 AMD             06040000 PTEC 00000000)
>ACPI: SSDT 0000000077e7fc40 00182 (v01 PTLTD  POWERNOW 06040000  LTP 00000001)
>ACPI: APIC 0000000077e7fdc2 00054 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
>ACPI: MCFG 0000000077e7fe16 0003C (v01 PTLTD    MCFG   06040000  LTP 00000000)
>ACPI: HPET 0000000077e7fe52 00038 (v01 PTLTD  HPETTBL  06040000  LTP 00000001)
>ACPI: SLIC 0000000077e7fe8a 00176 (v01 DELL    M08     06040000  LTP 00000000)
>ACPI: Local APIC address 0xfee00000
>Scanning NUMA topology in Northbridge 24
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000077e70000
>Bootmem setup node 0 0000000000000000-0000000077e70000
>  NODE_DATA [000000000000a000 - 000000000000efff]
>  bootmap [000000000000f000 -  000000000001dfcf] pages f
>(11 early reservations) ==> bootmem [0000000000 - 0077e70000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0001000000 - 0001c9d964]    TEXT DATA BSS ==> [0001000000 - 0001c9d964]
>  #2 [0001c9e000 - 0001c9e18c]              BRK ==> [0001c9e000 - 0001c9e18c]
>  #3 [00000f8540 - 0000100000]    BIOS reserved ==> [00000f8540 - 0000100000]
>  #4 [00000f8530 - 00000f8540]     MP-table mpf ==> [00000f8530 - 00000f8540]
>  #5 [000009dc00 - 000009e171]    BIOS reserved ==> [000009dc00 - 000009e171]
>  #6 [000009e2cd - 00000f8530]    BIOS reserved ==> [000009e2cd - 00000f8530]
>  #7 [000009e171 - 000009e2cd]     MP-table mpc ==> [000009e171 - 000009e2cd]
>  #8 [0000001000 - 0000003000]       TRAMPOLINE ==> [0000001000 - 0000003000]
>  #9 [0000003000 - 0000007000]      ACPI WAKEUP ==> [0000003000 - 0000007000]
>  #10 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
> [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002200000-ffff880003dfffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00100000
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009d
>    0: 0x00000100 -> 0x00077e70
>On node 0 totalpages: 491021
>  DMA zone: 56 pages used for memmap
>  DMA zone: 106 pages reserved
>  DMA zone: 3835 pages, LIFO batch:0
>  DMA32 zone: 6659 pages used for memmap
>  DMA32 zone: 480365 pages, LIFO batch:31
>Detected use of extended apic ids on hypertransport bus
>ACPI: PM-Timer IO Port: 0x8008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x43538301 base: 0xfed00000
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 000000000009d000 - 000000000009e000
>PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
>PM: Registered nosave memory: 00000000000ce000 - 0000000000100000
>Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
>setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 27 pages/cpu @ffff880001e00000 s78488 r8192 d23912 u1048576
>pcpu-alloc: s78488 r8192 d23912 u1048576 alloc=1*2097152
>pcpu-alloc: [0] 0 1 
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 484200
>Policy zone: DMA32
>Kernel command line: root=/dev/sda2 quiet data=ordered
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>Checking aperture...
>No AGP bridge found
>Node 0: aperture @ 1800000000 size 32 MB
>Aperture beyond 4GB. Ignoring.
>Memory: 1922096k/1964480k available (7033k kernel code, 396k absent, 41988k reserved, 4173k data, 652k init)
>Hierarchical RCU implementation.
>NR_IRQS:1280
>Console: colour VGA+ 80x25
>console [tty0] enabled
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 1595.717 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.43 BogoMIPS (lpj=1595717)
>Security Framework initialized
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>tseg: 0077f00000
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 5 MCE banks
>using C1E aware idle routine
>Performance Events: AMD PMU driver.
>... version:                0
>... bit width:              48
>... generic registers:      4
>... value mask:             0000ffffffffffff
>... max period:             00007fffffffffff
>... fixed-purpose events:   0
>... event mask:             000000000000000f
>ACPI: Core revision 20091214
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
>..MP-BIOS bug: 8254 timer not connected to IO-APIC
>...trying to set up timer (IRQ0) through the 8259A ...
>..... (found apic 0 pin 0) ...
>....... works.
>CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-50 stepping 02
>Booting Node   0, Processors  #1
>Brought up 2 CPUs
>Total of 2 processors activated (6383.30 BogoMIPS).
>System has AMD C1E enabled
>Switch to broadcast mode on CPU1
>Switch to broadcast mode on CPU0
>NET: Registered protocol family 16
>node 0 link 0: io port [1000, fffff]
>TOM: 0000000080000000 aka 2048M
>node 0 link 0: mmio [d0000000, dfffffff]
>node 0 link 0: mmio [c8000000, cfffffff]
>node 0 link 0: mmio [a0000, bffff]
>node 0 link 0: mmio [f0000000, ffffffff]
>node 0 link 0: mmio [e0000000, efffffff]
>node 0 link 0: mmio [80000000, c7ffffff]
>bus: [00, ff] on node 0 link 0
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [80000000, efffffff]
>bus: 00 index 2 mmio: [a0000, bffff]
>bus: 00 index 3 mmio: [f0000000, fcffffffff]
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-09] at [mem 0xe0000000-0xe09fffff] (base 0xe0000000)
>PCI: MMCONFIG at [mem 0xe0000000-0xe09fffff] reserved in E820
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: BIOS _OSI(Linux) query ignored
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>[Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
>ACPI: EC: GPE = 0x14, I/O: command/status = 0x66, data = 0x62
>ACPI: No dock devices found.
>ACPI Error: Needed type [Reference], found [Device] ffff880077b734c0 (20091214/exresop-104)
>ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20091214/dswexec-445)
>ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff880077b7c760), AE_AML_OPERAND_TYPE
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
>pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d1fff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000d2000-0x000d3fff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d5fff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000d6000-0x000d7fff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000d9fff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000da000-0x000dbfff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000ddfff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000de000-0x000dffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e1fff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000e2000-0x000e3fff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xffffffff] (ignored)
>pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
>pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:05.0: PME# disabled
>pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:06.0: PME# disabled
>pci 0000:00:12.0: reg 10: [io  0x8438-0x843f]
>pci 0000:00:12.0: reg 14: [io  0x8454-0x8457]
>pci 0000:00:12.0: reg 18: [io  0x8430-0x8437]
>pci 0000:00:12.0: reg 1c: [io  0x8450-0x8453]
>pci 0000:00:12.0: reg 20: [io  0x8400-0x840f]
>pci 0000:00:12.0: reg 24: [mem 0xc0004000-0xc00043ff]
>pci 0000:00:12.0: set SATA to AHCI mode
>pci 0000:00:13.0: reg 10: [mem 0xc0005000-0xc0005fff]
>pci 0000:00:13.1: reg 10: [mem 0xc0006000-0xc0006fff]
>pci 0000:00:13.2: reg 10: [mem 0xc0007000-0xc0007fff]
>pci 0000:00:13.3: reg 10: [mem 0xc0008000-0xc0008fff]
>pci 0000:00:13.4: reg 10: [mem 0xc0009000-0xc0009fff]
>pci 0000:00:13.5: reg 10: [mem 0xc0004400-0xc00044ff]
>pci 0000:00:13.5: supports D1 D2
>pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
>pci 0000:00:13.5: PME# disabled
>pci 0000:00:14.0: reg 10: [io  0x8410-0x841f]
>pci 0000:00:14.0: reg 14: [mem 0xfed00000-0xfed003ff]
>pci 0000:00:14.1: reg 10: [io  0x01f0-0x01f7]
>pci 0000:00:14.1: reg 14: [io  0x03f4-0x03f7]
>pci 0000:00:14.1: reg 18: [io  0x0000-0x0007]
>pci 0000:00:14.1: reg 1c: [io  0x0000-0x0003]
>pci 0000:00:14.1: reg 20: [io  0x8420-0x842f]
>pci 0000:00:14.2: reg 10: [mem 0xc0000000-0xc0003fff 64bit]
>pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:14.2: PME# disabled
>pci 0000:01:05.0: reg 10: [mem 0xc8000000-0xcfffffff pref]
>pci 0000:01:05.0: reg 14: [io  0x9000-0x90ff]
>pci 0000:01:05.0: reg 18: [mem 0xc0100000-0xc010ffff]
>pci 0000:01:05.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>pci 0000:01:05.0: supports D1 D2
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]
>pci 0000:00:01.0:   bridge window [mem 0xc0100000-0xc01fffff]
>pci 0000:00:01.0:   bridge window [mem 0xc8000000-0xcfffffff 64bit pref]
>pci 0000:00:05.0: PCI bridge to [bus 02-04]
>pci 0000:00:05.0:   bridge window [io  0x0000-0x0fff]
>pci 0000:00:05.0:   bridge window [mem 0x00000000-0x000fffff]
>pci 0000:05:00.0: reg 10: [mem 0xc0200000-0xc0203fff]
>pci 0000:05:00.0: supports D1 D2
>pci 0000:00:06.0: PCI bridge to [bus 05-07]
>pci 0000:00:06.0:   bridge window [mem 0xc0200000-0xc02fffff]
>pci 0000:08:00.0: reg 10: [mem 0xc0300000-0xc0301fff]
>pci 0000:08:00.0: supports D1 D2
>pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:08:00.0: PME# disabled
>pci 0000:08:01.0: reg 10: [mem 0xc0302000-0xc03020ff]
>pci 0000:08:01.0: supports D1 D2
>pci 0000:08:01.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:08:01.0: PME# disabled
>pci 0000:08:01.1: reg 10: [mem 0xc0302400-0xc03024ff]
>pci 0000:08:01.1: supports D1 D2
>pci 0000:08:01.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:08:01.1: PME# disabled
>pci 0000:00:14.4: PCI bridge to [bus 08-0a] (subtractive decode)
>pci 0000:00:14.4:   bridge window [mem 0xc0300000-0xc03fffff]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI Error: Needed type [Reference], found [Device] ffff880077b734c0 (20091214/exresop-104)
>ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20091214/dswexec-445)
>ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff880077b7c760), AE_AML_OPERAND_TYPE
>ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled.
>vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>Advanced Linux Sound Architecture Driver Version 1.0.21.
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>pci 0000:00:05.0: can't reserve window [io  0x0000-0x0fff]
>pci 0000:00:05.0: can't reserve window [mem 0x00000000-0x000fffff]
>Bluetooth: Core ver 2.15
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 comparators, 32-bit 14.318180 MHz counter
>Switching to clocksource hpet
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:09: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:01:05.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
>system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
>system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
>system 00:08: [io  0x1080] has been reserved
>system 00:08: [io  0x0220-0x022f] has been reserved
>system 00:08: [io  0x040b] has been reserved
>system 00:08: [io  0x04d0-0x04d1] has been reserved
>system 00:08: [io  0x04d6] has been reserved
>system 00:08: [io  0x0530-0x0537] has been reserved
>system 00:08: [io  0x0c00-0x0c01] has been reserved
>system 00:08: [io  0x0c14] has been reserved
>system 00:08: [io  0x0c50-0x0c52] has been reserved
>system 00:08: [io  0x0c6c] has been reserved
>system 00:08: [io  0x0c6f] has been reserved
>system 00:08: [io  0x0cd0-0x0cd3] has been reserved
>system 00:08: [io  0x0cd4-0x0cd5] has been reserved
>system 00:08: [io  0x0cd6-0x0cd7] has been reserved
>system 00:08: [io  0x0cd8-0x0cdf] has been reserved
>system 00:08: [io  0x8000-0x805f] has been reserved
>system 00:08: [io  0x0f40-0x0f47] has been reserved
>system 00:08: [io  0x087f] has been reserved
>system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
>system 00:09: [mem 0xfff00000-0xffffffff] could not be reserved
>system 00:09: [mem 0xc0004800-0xc0004bff] has been reserved
>system 00:09: [mem 0xfed00000-0xfed003ff] has been reserved
>pci 0000:00:05.0: BAR 8: assigned [mem 0x80000000-0x801fffff]
>pci 0000:00:05.0: BAR 9: assigned [mem 0x80200000-0x803fffff 64bit pref]
>pci 0000:00:06.0: BAR 9: assigned [mem 0x80400000-0x805fffff 64bit pref]
>pci 0000:00:05.0: BAR 7: assigned [io  0x2000-0x2fff]
>pci 0000:00:06.0: BAR 7: assigned [io  0x3000-0x3fff]
>pci 0000:01:05.0: BAR 6: assigned [mem 0xc0120000-0xc013ffff pref]
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]
>pci 0000:00:01.0:   bridge window [mem 0xc0100000-0xc01fffff]
>pci 0000:00:01.0:   bridge window [mem 0xc8000000-0xcfffffff 64bit pref]
>pci 0000:00:05.0: PCI bridge to [bus 02-04]
>pci 0000:00:05.0:   bridge window [io  0x2000-0x2fff]
>pci 0000:00:05.0:   bridge window [mem 0x80000000-0x801fffff]
>pci 0000:00:05.0:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
>pci 0000:00:06.0: PCI bridge to [bus 05-07]
>pci 0000:00:06.0:   bridge window [io  0x3000-0x3fff]
>pci 0000:00:06.0:   bridge window [mem 0xc0200000-0xc02fffff]
>pci 0000:00:06.0:   bridge window [mem 0x80400000-0x805fffff 64bit pref]
>pci 0000:00:14.4: PCI bridge to [bus 08-0a]
>pci 0000:00:14.4:   bridge window [io  disabled]
>pci 0000:00:14.4:   bridge window [mem 0xc0300000-0xc03fffff]
>pci 0000:00:14.4:   bridge window [mem pref disabled]
>pci 0000:00:05.0: enabling device (0000 -> 0003)
>pci 0000:00:05.0: setting latency timer to 64
>pci 0000:00:06.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
>pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
>pci_bus 0000:01: resource 0 [io  0x9000-0x9fff]
>pci_bus 0000:01: resource 1 [mem 0xc0100000-0xc01fffff]
>pci_bus 0000:01: resource 2 [mem 0xc8000000-0xcfffffff 64bit pref]
>pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
>pci_bus 0000:02: resource 1 [mem 0x80000000-0x801fffff]
>pci_bus 0000:02: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
>pci_bus 0000:05: resource 0 [io  0x3000-0x3fff]
>pci_bus 0000:05: resource 1 [mem 0xc0200000-0xc02fffff]
>pci_bus 0000:05: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
>pci_bus 0000:08: resource 1 [mem 0xc0300000-0xc03fffff]
>pci_bus 0000:08: resource 3 [io  0x0000-0xffff]
>pci_bus 0000:08: resource 4 [mem 0x00000000-0xffffffffffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>UDP hash table entries: 1024 (order: 3, 32768 bytes)
>UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
>NET: Registered protocol family 1
>pci 0000:00:00.0: MSI quirk detected; MSI disabled
>pci 0000:01:05.0: Boot video device
>PCI: CLS 32 bytes, default 64
>kvm: Nested Virtualization enabled
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>squashfs: version 4.0 (2009/01/31) Phillip Lougher
>Slow work thread pool: Starting up
>Slow work thread pool: Ready
>NTFS driver 2.1.29 [Flags: R/W].
>fuse init (API version 7.13)
>msgmni has been set to 3754
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>io scheduler sio registered
>pcieport 0000:00:05.0: setting latency timer to 64
>pcieport 0000:00:06.0: setting latency timer to 64
>Real Time Clock Driver v1.12b
>Linux agpgart interface v0.103
>ALI M7101 PMU not found.
>radeonfb 0000:01:05.0: power state changed by ACPI to D0
>radeonfb 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>radeonfb: Retrieved PLL infos from BIOS
>radeonfb: Reference=14.32 MHz (RefDiv=6) Memory=400.00 Mhz, System=200.00 MHz
>radeonfb: PLL min 20000 max 40000
>Non-DDC laptop panel detected
>i2c i2c-2: unable to read EDID block.
>i2c i2c-2: unable to read EDID block.
>i2c i2c-2: unable to read EDID block.
>radeonfb: Monitor 1 type LCD found
>radeonfb: Monitor 2 type no found
>radeonfb: panel ID string: LPL                     
>radeonfb: detected LVDS panel size from BIOS: 1280x800
>radeondb: BIOS provided dividers will be used
>Console: switching to colour frame buffer device 160x50
>radeonfb (0000:01:05.0): ATI Radeon 5975 "Yu"
>ACPI: AC Adapter [ACAD] (on-line)
>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
>ACPI: Power Button [PWRB]
>input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
>ACPI: Sleep Button [SLPB]
>input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
>ACPI: Lid Switch [LID]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>ACPI: Power Button [PWRF]
>[Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
>acpi device:1c: registered as cooling_device0
>input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1a/LNXVIDEO:00/input/input4
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>ACPI: processor limited to max C-state 1
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (55 C)
>[drm] Initialized drm 1.1.0 20060810
>[drm] radeon defaulting to userspace modesetting.
>[drm] Initialized radeon 1.32.0 20080528 for 0000:01:05.0 on minor 0
>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>ACPI: Battery Slot [BAT1] (battery present)
>floppy0: no floppy controllers found
>brd: module loaded
>loop: module loaded
>Uniform Multi-Platform E-IDE driver
>atiixp 0000:00:14.1: IDE controller (0x1002:0x438c rev 0x00)
>ATIIXP_IDE 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>atiixp 0000:00:14.1: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x8420-0x8427
>Probing IDE interface ide0...
>hda: HL-DT-STCD-RW/DVD-ROM GCC-4244N, ATAPI CD/DVD-ROM drive
>hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>hda: UDMA/33 mode selected
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
>ide-gd driver 1.18
>ide-cd driver 5.00
>ide-cd: hda: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
>Uniform CD-ROM driver Revision: 3.20
>ahci 0000:00:12.0: version 3.0
>ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
>ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc 
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 abar m1024@0xc0004000 port 0xc0004100 irq 22
>ata2: SATA max UDMA/133 abar m1024@0xc0004000 port 0xc0004180 irq 22
>ata3: SATA max UDMA/133 abar m1024@0xc0004000 port 0xc0004200 irq 22
>ata4: SATA max UDMA/133 abar m1024@0xc0004000 port 0xc0004280 irq 22
>b44 0000:08:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
>ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
>ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
>ssb: SPROM revision 16 detected.
>ssb: Sonics Silicon Backplane found on PCI device 0000:08:00.0
>b44.c:v2.0
>eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:19:b9:74:16:af
>PPP generic driver version 2.4.2
>PPP Deflate Compression module registered
>PPP BSD Compression module registered
>NET: Registered protocol family 24
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>hso: drivers/net/usb/hso.c: 1.2 Option Wireless
>usbcore: registered new interface driver hso
>console [netcon0] enabled
>netconsole: network logging started
>Fusion MPT base driver 3.04.13
>Copyright (c) 1999-2008 LSI Corporation
>Fusion MPT SPI Host driver 3.04.13
>ieee1394: raw1394: /dev/raw1394 device initialized
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:13.5: EHCI Host Controller
>ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
>ehci_hcd 0000:00:13.5: debug port 1
>ehci_hcd 0000:00:13.5: irq 19, io mem 0xc0004400
>ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.0: irq 16, io mem 0xc0005000
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:13.1: irq 17, io mem 0xc0006000
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.2: OHCI Host Controller
>ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:13.2: irq 18, io mem 0xc0007000
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ohci_hcd 0000:00:13.3: OHCI Host Controller
>ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
>ohci_hcd 0000:00:13.3: irq 17, io mem 0xc0008000
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.4: OHCI Host Controller
>ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
>ohci_hcd 0000:00:13.4: irq 18, io mem 0xc0009000
>ata2: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>ata3: SATA link down (SStatus 0 SControl 300)
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>uhci_hcd: USB Universal Host Controller Interface driver
>usbcore: registered new interface driver usblp
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usbcore: registered new interface driver ums-cypress
>usbcore: registered new interface driver ums-onetouch
>usbcore: registered new interface driver usbserial
>USB Serial support registered for generic
>usb 1-1: new high speed USB device using ehci_hcd and address 2
>scsi4 : usb-storage 1-1:1.0
>usb 1-5: new high speed USB device using ehci_hcd and address 3
>scsi5 : usb-storage 1-5:1.0
>ata1: softreset failed (device not ready)
>ata1: applying SB600 PMP SRST workaround and retrying
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: Hitachi HTS541612J9SA00, SBDOC74P, max UDMA/100
>ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
>ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54161 SBDO PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: Attached scsi generic sg0 type 0
> sda:
>usb 5-1: new full speed USB device using ohci_hcd and address 2
>hub 5-1:1.0: USB hub found
>hub 5-1:1.0: 4 ports detected
>usbcore: registered new interface driver usbserial_generic
>usbserial: USB Serial Driver core
>USB Serial support registered for ark3116
>usbcore: registered new interface driver ark3116
>ark3116:v0.5:USB ARK3116 serial/IrDA driver
>USB Serial support registered for DeLorme Earthmate USB
>USB Serial support registered for HID->COM RS232 Adapter
>USB Serial support registered for Nokia CA-42 V2 Adapter
>usbcore: registered new interface driver cypress
>cypress_m8: v1.09:Cypress USB to Serial Driver
>USB Serial support registered for Digi 2 port USB adapter
>USB Serial support registered for Digi 4 port USB adapter
>usbcore: registered new interface driver digi_acceleport
>digi_acceleport: v1.80.1.2:Digi AccelePort USB-2/USB-4 Serial Converter driver
>USB Serial support registered for Garmin GPS usb/tty
>usbcore: registered new interface driver garmin_gps
>garmin_gps: v0.33:garmin gps driver
>USB Serial support registered for Moschip 7840/7820 USB Serial Driver
>mos7840: 1.3.2:Moschip 7840/7820 USB Serial Driver
>usbcore: registered new interface driver mos7840
>USB Serial support registered for navman
>usbcore: registered new interface driver navman
>USB Serial support registered for oti6858
>usbcore: registered new interface driver oti6858
>USB Serial support registered for SPCP8x5
>usbcore: registered new interface driver spcp8x5
>spcp8x5: v0.04:SPCP8x5 USB to serial adaptor driver
>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>usbcore: registered new interface driver xpad
>xpad: X-Box pad driver
>lirc_dev: IR Remote Control driver registered, major 251 
>i2c /dev entries driver
>Linux video capture interface: v2.00
>gspca: main v2.8.0 registered
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (v0.1.0)
>k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
>Linux telephony interface: v1.00
>device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
>Bluetooth: Broadcom Blutonium firmware driver ver 1.2
>usbcore: registered new interface driver bcm203x
>Bluetooth: Digianswer Bluetooth USB driver ver 0.10
>usbcore: registered new interface driver bpa10x
>Bluetooth: BlueFRITZ! USB driver ver 1.2
>usbcore: registered new interface driver bfusb
>Bluetooth: Generic Bluetooth USB driver ver 0.6
>usbcore: registered new interface driver btusb
>cpuidle: using governor ladder
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci-pci 0000:08:01.0: SDHCI controller found [1180:0822] (rev 19)
>sdhci-pci 0000:08:01.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
>mmc0: SDHCI controller on PCI [0000:08:01.0] using PIO
>ricoh-mmc: Ricoh MMC Controller disabling driver
>ricoh-mmc: Copyright(c) Philip Langdale
>ricoh-mmc: Ricoh MMC controller found at 0000:08:01.1 [1180:0843] (rev 1)
>ricoh-mmc: Main Ricoh function not found. Cannot disable controller.
>dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>wacom driver registered
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
>ALSA device list:
>  #0: HDA ATI SB at 0xc0000000 irq 16
>oprofile: using NMI interrupt.
>TCP cubic registered
>NET: Registered protocol family 17
>Bluetooth: L2CAP ver 2.14
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: SCO (Voice Link) ver 0.6
>Bluetooth: SCO socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM ver 1.11
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-50 processors (2 cpu cores) (version 2.20.00)
>powernow-k8:    0 : fid 0x8 (1600 MHz), vid 0x12
>powernow-k8:    1 : fid 0x0 (800 MHz), vid 0x1e
>powernow-k8: limiting to cpu 0 failed
>TuxOnIce 3.1 (http://tuxonice.net)
> sda1 sda2 sda3 < sda5 sda6 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>TuxOnIce: Unable to find a signature. Could you have moved a swap file?
>TuxOnIce: Block I/O: No signature found at /dev/sda5:0xd6048.
>registered taskstats version 1
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda2): mounted filesystem with writeback data mode
>VFS: Mounted root (ext3 filesystem) readonly on device 8:2.
>Freeing unused kernel memory: 652k freed
>BFS CPU scheduler v0.316 by Con Kolivas.
>usb 5-1.1: new low speed USB device using ohci_hcd and address 3
>input: HOLTEK Wireless 2.4GHz Trackball Keyboard as /devices/pci0000:00/0000:00:13.3/usb5/5-1/5-1.1/5-1.1:1.0/input/input6
>generic-usb 0003:1241:F767.0001: input: USB HID v1.10 Keyboard [HOLTEK Wireless 2.4GHz Trackball Keyboard] on usb-0000:00:13.3-1.1/input0
>input: HOLTEK Wireless 2.4GHz Trackball Keyboard as /devices/pci0000:00/0000:00:13.3/usb5/5-1/5-1.1/5-1.1:1.1/input/input7
>generic-usb 0003:1241:F767.0002: input: USB HID v1.10 Mouse [HOLTEK Wireless 2.4GHz Trackball Keyboard] on usb-0000:00:13.3-1.1/input1
>usb 5-1.2: new low speed USB device using ohci_hcd and address 4
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.3/usb5/5-1/5-1.2/5-1.2:1.0/input/input8
>generic-usb 0003:046D:C518.0003: input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.3-1.2/input0
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.3/usb5/5-1/5-1.2/5-1.2:1.1/input/input9
>generic-usb 0003:046D:C518.0004: input: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.3-1.2/input1
>usb 5-1.3: new full speed USB device using ohci_hcd and address 5
>usb 5-1.4: new full speed USB device using ohci_hcd and address 6
>usb 5-1.4: not running at top speed; connect to a high speed hub
>uvcvideo: Found UVC 1.00 device <unnamed> (046d:0802)
>input: UVC Camera (046d:0802) as /devices/pci0000:00/0000:00:13.3/usb5/5-1/5-1.4/5-1.4:1.0/input/input10
>udev: starting version 149
>scsi 4:0:0:0: Direct-Access     Initio   INIC-1610P       1.03 PQ: 0 ANSI: 4
>sd 4:0:0:0: Attached scsi generic sg1 type 0
>scsi 5:0:0:0: Direct-Access     ST310005 28AS                  PQ: 0 ANSI: 2 CCS
>sd 5:0:0:0: Attached scsi generic sg2 type 0
>sd 5:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
>sd 5:0:0:0: [sdc] Write Protect is off
>sd 5:0:0:0: [sdc] Mode Sense: 34 00 00 00
>sd 5:0:0:0: [sdc] Assuming drive cache: write through
>sd 5:0:0:0: [sdc] Assuming drive cache: write through
> sdc: sdc1
>sd 5:0:0:0: [sdc] Assuming drive cache: write through
>sd 5:0:0:0: [sdc] Attached SCSI disk
>Synaptics Touchpad, model: 1, fw: 6.3, id: 0x180b1, caps: 0xa04713/0x200000
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
>sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
>sd 4:0:0:0: [sdb] Write Protect is off
>sd 4:0:0:0: [sdb] Mode Sense: 00 26 00 00
>sd 4:0:0:0: [sdb] Assuming drive cache: write through
>sd 4:0:0:0: [sdb] Assuming drive cache: write through
> sdb: sdb1
>sd 4:0:0:0: [sdb] Assuming drive cache: write through
>sd 4:0:0:0: [sdb] Attached SCSI disk
>EXT3-fs (sda2): using internal journal
>vboxdrv: Trying to deactivate the NMI watchdog permanently...
>vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
>vboxdrv: counter framework which can generate NMIs is active. You have to prevent
>vboxdrv: the usage of hardware performance counters by
>vboxdrv:   echo 2 > /proc/sys/kernel/perf_counter_paranoid
>vboxdrv: Found 2 processor cores.
>VBoxDrv: dbg - g_abExecMemory=ffffffffa002b480
>vboxdrv: fAsync=1 offMin=0x81e51 offMax=0x81e51
>vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
>vboxdrv: Successfully loaded version 3.2.0 (interface 0x00140001).
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda5): using internal journal
>EXT3-fs (sda5): mounted filesystem with writeback data mode
>Adding 2096440k swap on /dev/sda6.  Priority:-1 extents:1 across:2096440k 
>[drm] Setting GART location based on new memory map
>[drm] Loading R300 Microcode
>platform radeon_cp.0: firmware: using built-in firmware radeon/R300_cp.bin
>[drm] Num pipes: 4
>[drm] writeback test succeeded in 1 usecs
>b44: eth0: Link is up at 100 Mbps, full duplex.
>b44: eth0: Flow control is off for TX and off for RX.
>b44: eth0: powering down PHY
>b44: eth0: powering down PHY
>[drm] Num pipes: 4
>b44: eth0: Link is up at 100 Mbps, full duplex.
>b44: eth0: Flow control is off for TX and off for RX.
>[drm] Setting GART location based on new memory map
>[drm] Loading R300 Microcode
>platform radeon_cp.0: firmware: using built-in firmware radeon/R300_cp.bin
>[drm] Num pipes: 4
>[drm] writeback test succeeded in 1 usecs
>CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
>UDF-fs: No anchor found
>UDF-fs: Rescanning with blocksize 2048
>UDF-fs: No anchor found
>UDF-fs: No partition found (1)
>UDF-fs: No anchor found
>UDF-fs: Rescanning with blocksize 2048
>UDF-fs: No anchor found
>UDF-fs: No partition found (1)
>ISOFS: Unable to identify CD-ROM format.
>ISOFS: Unable to identify CD-ROM format.
>FAT: bogus number of reserved sectors
>VFS: Can't find a valid FAT filesystem on dev sdc1.
>FAT: bogus number of reserved sectors
>VFS: Can't find a valid FAT filesystem on dev sdc1.
>hfs: unable to find HFS+ superblock
>hfs: unable to find HFS+ superblock
>EXT4-fs (sdc1): mounted filesystem with ordered data mode
>xfce4-places-pl[8232]: segfault at 9c7 ip 00000000000009c7 sp 00007fff28a80f68 error 14 in xfce4-places-plugin[400000+d000]
>CE: hpet increasing min_delta_ns to 15000 nsec
>cdrom: This disc doesn't have any tracks I recognize!
>b44: eth0: powering down PHY
>b44: eth0: powering down PHY
>b44: eth0: powering down PHY
>b44: eth0: Link is up at 100 Mbps, full duplex.
>b44: eth0: Flow control is off for TX and off for RX.
>cdrom: This disc doesn't have any tracks I recognize!
>cdrom: This disc doesn't have any tracks I recognize!
>cdrom: This disc doesn't have any tracks I recognize!
>cdrom: This disc doesn't have any tracks I recognize!
>xbmc.bin[2561]: segfault at a ip 00007f4f254258e1 sp 00007fffc3d03f70 error 4 in libc-2.10.1.so[7f4f253b2000+14f000]
>b44: eth0: powering down PHY
>b44: eth0: powering down PHY
>b44: eth0: powering down PHY
>b44: eth0: Link is up at 100 Mbps, full duplex.
>b44: eth0: Flow control is off for TX and off for RX.
>Clocksource tsc unstable (delta = 62502455 ns)
>TCP: Peer 83.255.165.113:56419/6983 unexpectedly shrunk window 477260528:477261550 (repaired)
>TCP: Peer 83.255.165.113:56419/6983 unexpectedly shrunk window 477354078:477354836 (repaired)
>TCP: Peer 83.255.165.113:56419/6983 unexpectedly shrunk window 477354078:477354836 (repaired)
>TCP: Peer 83.255.165.113:56419/6983 unexpectedly shrunk window 477489438:477490854 (repaired)
>TCP: Peer 83.255.165.113:56419/6983 unexpectedly shrunk window 477489438:477490854 (repaired)
>TCP: Peer 83.255.165.113:56419/6983 unexpectedly shrunk window 477489438:477490854 (repaired)
>cdrom: This disc doesn't have any tracks I recognize!
>xbmc.bin[30278]: segfault at a ip 00007f92eb2358e1 sp 00007fff4ed66d10 error 4 in libc-2.10.1.so[7f92eb1c2000+14f000]
>cdrom: This disc doesn't have any tracks I recognize!
>xbmc.bin[24886]: segfault at a ip 00007f9376aa18e1 sp 00007fffd587cfb0 error 4 in libc-2.10.1.so[7f9376a2e000+14f000]
>cdrom: This disc doesn't have any tracks I recognize!
>cdrom: This disc doesn't have any tracks I recognize!
>cdrom: This disc doesn't have any tracks I recognize!
>cdrom: This disc doesn't have any tracks I recognize!
>cdrom: This disc doesn't have any tracks I recognize!
>cdrom: This disc doesn't have any tracks I recognize!
>cdrom: This disc doesn't have any tracks I recognize!
>cdrom: This disc doesn't have any tracks I recognize!
>cdrom: This disc doesn't have any tracks I recognize!
>cdrom: This disc doesn't have any tracks I recognize!
>[drm] Num pipes: 4
>[drm] Setting GART location based on new memory map
>[drm] Loading R300 Microcode
>platform radeon_cp.0: firmware: using built-in firmware radeon/R300_cp.bin
>[drm] Num pipes: 4
>[drm] writeback test succeeded in 1 usecs
>cdrom: This disc doesn't have any tracks I recognize!
>[drm] Num pipes: 4
>[drm] Setting GART location based on new memory map
>[drm] Loading R300 Microcode
>platform radeon_cp.0: firmware: using built-in firmware radeon/R300_cp.bin
>[drm] Num pipes: 4
>[drm] writeback test succeeded in 1 usecs
>cdrom: This disc doesn't have any tracks I recognize!
>cdrom: This disc doesn't have any tracks I recognize!
>[drm] Num pipes: 4
>cdrom: This disc doesn't have any tracks I recognize!
>cdrom: This disc doesn't have any tracks I recognize!
>[drm] Num pipes: 4
>[drm] Num pipes: 4
>[drm] Num pipes: 4
>[drm] Num pipes: 4
>[drm] Num pipes: 4
>[drm] Num pipes: 4
>cdrom: This disc doesn't have any tracks I recognize!
>[drm] Num pipes: 4
>[drm] Num pipes: 4
>cdrom: This disc doesn't have any tracks I recognize!
>[drm] Num pipes: 4
>[drm] Setting GART location based on new memory map
>[drm] Loading R300 Microcode
>platform radeon_cp.0: firmware: using built-in firmware radeon/R300_cp.bin
>[drm] Num pipes: 4
>[drm] writeback test succeeded in 1 usecs
>cdrom: This disc doesn't have any tracks I recognize!
>cdrom: This disc doesn't have any tracks I recognize!
>b44: eth0: powering down PHY
>b44: eth0: powering down PHY
>b44: eth0: powering down PHY
>b44: eth0: Link is up at 100 Mbps, full duplex.
>b44: eth0: Flow control is off for TX and off for RX.

Actions: View

Attachments on bug 28238: 35853 | 35854

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.