Attachment 11589 Details for Bug 12444 – xorg.conf that results in black screen

xorg.conf that results in black screen

xorg.conf (text/plain), 6.91 KB, created by Asbjørn Sannes on 2007-09-16 07:56:38 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Asbjørn Sannes

Created: 2007-09-16 07:56:38 UTC

Size: 6.91 KB

patch

obsolete

>Section "Files"
>    RgbPath	"/usr/share/X11/rgb"
>    # FontPath	"unix/:-1"
>    FontPath	"/usr/share/fonts/local/"
>    FontPath	"/usr/share/fonts/misc/"
>    FontPath	"/usr/share/fonts/75dpi/:unscaled"
>    FontPath	"/usr/share/fonts/100dpi/:unscaled"
>    FontPath	"/usr/share/fonts/Type1/"
>    FontPath    "/usr/share/fonts/TTF/"
>    FontPath	"/usr/share/fonts/CID/"
>    FontPath	"/usr/share/fonts/Speedo/"
>    FontPath	"/usr/share/fonts/75dpi/"
>    FontPath	"/usr/share/fonts/100dpi/"
>EndSection
>
>Section "Module"
>
># This loads the DBE extension module.
>
>    Load	"dbe"
>
># This loads the miscellaneous extensions module, and disables
># initialisation of the XFree86-DGA extension within that module.
>
>    SubSection	"extmod"
>	Option	"omit xfree86-dga"
>    EndSubSection
>
>
>
># This loads the Type1 and FreeType font modules
>
>    Load	"type1"
>    Load	"freetype"
>    Load	"dri"
>    Load	"glx"
>    Load	"extmod"
>EndSection
>
>#Section "Extensions"
>#	Option "Composite" "Enable"
>#EndSection
>
>
># **********************************************************************
># Server flags section.  This contains various server-wide Options.
># **********************************************************************
>
>Section "ServerFlags"
>
># Uncomment this to cause a core dump at the spot where a signal is 
># received.  This may leave the console in an unusable state, but may
># provide a better stack trace in the core dump to aid in debugging
>
>#    Option	"NoTrapSignals"
>
># Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
># (where n is 1 through 12).  This allows clients to receive these key
># events.
>
>#    Option	"DontVTSwitch"
>
># Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
># This allows clients to receive this key event.
>
>#    Option	"DontZap"
>
># Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
># sequences.  This allows clients to receive these key events.
>
>#    Option	"DontZoom"
>
># Uncomment this to disable tuning with the xvidtune client. With
># it the client can still run and fetch card and monitor attributes,
># but it will not be allowed to change them. If it tries it will
># receive a protocol error.
>
>#    Option	"DisableVidModeExtension"
>
># Uncomment this to enable the use of a non-local xvidtune client.
>
>#    Option	"AllowNonLocalXvidtune"
>
># Uncomment this to disable dynamically modifying the input device
># (mouse and keyboard) settings.
>
>#    Option	"DisableModInDev"
>
># Uncomment this to enable the use of a non-local client to
># change the keyboard or mouse settings (currently only xset).
>
>#    Option	"AllowNonLocalModInDev"
>
># Set the basic blanking screen saver timeout.
>
>    Option	"blank time"	"10"	# 10 minutes
>
># Set the DPMS timeouts.  These are set here because they are global
># rather than screen-specific.  These settings alone don't enable DPMS.
># It is enabled per-screen (or per-monitor), and even then only when
># the driver supports it.
>
>    Option	"standby time"	"20"
>    Option	"suspend time"	"30"
>    Option	"off time"	"60"
>
># On some platform the server needs to estimate the sizes of PCI
># memory and pio ranges. This is done by assuming that PCI ranges
># don't overlap. Some broken BIOSes tend to set ranges of inactive
># devices wrong. Here one can adjust how aggressive the assumptions
># should be. Default is 0.
>
># Option   "EstimateSizesAggresively" "0"
>
>EndSection
>
># **********************************************************************
># Input devices
># **********************************************************************
>
># **********************************************************************
># Core keyboard's InputDevice section
># **********************************************************************
>
>Section "InputDevice"
>    Identifier	"Keyboard1"
>    Driver	"kbd"
>    Option	"XkbLayout"	"no"
>    Option	"AutoRepeat"	"200 50"
>    Option	"XkbModel"	"pc105"
>    Option	"XkbVariant"	"dvorak"
>EndSection
>
>
># **********************************************************************
># Core Pointer's InputDevice section
># **********************************************************************
>
>Section "InputDevice"
>    Identifier	"Mouse1"
>    Driver	"mouse"
>    Option "Resolution" "400"
>    Option	"Device"	"/dev/input/mice"
>#    Option	"Protocol"	"Auto"
>    Option "Protocol"	"IMPS/2"
>EndSection
>
># **********************************************************************
># Monitor section
># **********************************************************************
>
># Any number of monitor sections may be present
>
>
>Section "Device"
>	Identifier	"open"
>	Driver		"radeon"
>#	VideoRam	131072
>#	Option          "AGPMode"       "4"
>#	Option		"EnablePageFlip" "on"
>#	Option          "DynamicClocks"    "on"
>#	Option		"DMAForXv" "on"
>#	Option		"ColorTiling" "on"
>#	Option          "BIOSHotkeys"       "on" 
>#	Option             "XaaNoScanlineImageWriteRect"
>#	Option             "XaaNoScanlineCPUToScreenColorExpandFill"
>
>#        BusID                    "PCI:1:0:0" 
>EndSection
>
># **********************************************************************
># Screen sections.
># **********************************************************************
>
># Any number of screen sections may be present.  Each describes
># the configuration of a single screen.  A single specific screen section
># may be specified from the X server command line with the "-screen"
># option.
>
>Section "Monitor"
>	Identifier	"Monitor LCD"
>	#Option	"DPMS"
>	#Modeline "1400x1050"  108.00  1400 1448 1560 1688  1050 1051 1054 1066
>	#Modeline "1280x960"  108.00  1280 1448 1560 1688  960 1051 1054 1066
>EndSection
>
>#Section "Monitor"
>#	Identifier "Monitor CRT"
>#	#Modeline "1400x1050"  108.00  1400 1448 1560 1688  1050 1051 1054 1066
>#	Option "DPMS"
>#	HorizSync    30.0 - 83.0
>#	VertRefresh  56.0 - 63.0
>#EndSection
>
>Section "Screen"
>    Identifier	"Screen LCD"
>    Device "open"
>    Monitor	"Monitor LCD"
>
>    DefaultDepth 24
>EndSection
>
>#Section "Screen"
>#    Identifier	"Screen CRT"
>#    Device "open"
>#    Monitor	"Monitor CRT"
>#
>#    DefaultDepth 24
>#EndSection
>
># section may be specified from the X server command line with the
># "-layout" option.  In the absence of this, the first section is used.
># When now ServerLayout section is present, the first Screen section
># is used alone.
>
>Section "ServerLayout"
>    Identifier	"another layout"
>    Screen 0	"Screen LCD"
>    #Screen 1    "Screen CRT" Above "Screen LCD"
>    InputDevice	"Mouse1" "CorePointer"
>    InputDevice "Keyboard1" "CoreKeyboard"
>EndSection
>
># **********************************************************************
># Refer to the XF86Config(4/5) man page for details about the format of 
># this file.
># **********************************************************************
>
># **********************************************************************
># DRI Section
># **********************************************************************
>Section "dri"
># Access to OpenGL ICD is allowed for all users:
>#    Mode 0666
># Access to OpenGL ICD is restricted to a specific user group:
>    Group 27    # video
>    Mode 0660
>EndSection

Actions: View

Attachments on bug 12444: 11588 | 11589

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.