"JMicron JMB363 IDE/SATA" rev 0x02
ahci0 at jmb0: apic 2 int 16 (irq 11), AHCI 1.0
scsibus0 at ahci0: 32 targets
jmb1 at pci3 dev 0 function 1 "JMicron JMB363 IDE/SATA" rev 0x02
pciide0 at jmb1: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 2 int 17 (irq 0) for native-PCI interrupt
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 23 (irq 14)
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 19 (irq 15)
uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x02: apic 2 int 18 (irq 5)
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 23 (irq 14)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xf2
pci4 at ppb3 bus 4
re0 at pci4 dev 4 function 0 "D-Link Systems DGE-528T" rev 0x10: RTL8169/8110SB (0x1000), apic 2 int 17 (irq 10), address 00:1c:f0:ba:bf:40
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 3
ichpcib0 at pci0 dev 31 function 0 "Intel 82801H LPC" rev 0x02: PM disabled
pciide1 at pci0 dev 31 function 2 "Intel 82801H SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 19 (irq 15) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD800JD-75MSA3>
wd0: 16-sector PIO, LBA48, 76293MB, 156250000 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x02: apic 2 int 18 (irq 15)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-4200CL3
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-4200CL3
pciide2 at pci0 dev 31 function 5 "Intel 82801H SATA" rev 0x02: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide2: using apic 2 int 19 (irq 15) for native-PCI interrupt
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x23
lm1 at wbsio0 port 0x290/8: W83627DHG
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
mtrr: Pentium Pro MTRR support
uhidev0 at uhub5 port 2 configuration 1 interface 0 "MouseCenter LASER Gamer Mouse" rev 1.10/51.04 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 8 buttons and Z dir.
wsmouse0 at ums0 mux 0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
cloning vnode
clone of vnode 0xd9d31144 is vnode 0xd9d311d8
OpenBSD 4.3-beta (GENERIC.DRM) #0: Wed Feb 27 19:15:54 GMT 2008
    oga@jessica.cybernetseraph.org:/home/oga/trees/scatter_dma/arch/i386/compile/GENERIC.DRM
cpu0: Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz ("GenuineIntel" 686-class) 1.87 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem  = 2129817600 (2031MB)
avail mem = 2051375104 (1956MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 07/25/07, BIOS32 rev. 0 @ 0xf0010, SMBIOS rev. 2.4 @ 0xf0690 (70 entries)
bios0: vendor American Megatrends Inc. version "1001" date 07/25/2007
bios0: ASUSTeK Computer INC. P5B-VM
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC MCFG OEMB HPET GSCI
acpi0: wakeup devices P0P2(S0) P0P1(S0) UAR1(S0) PS2K(S0) PS2M(S0) EUSB(S0) USBE(S0) P0P5(S0) P0P6(S0) P0P7(S0) P0P8(S0) P0P9(S0) USB0(S0) USB1(S0) USB2(S0) USB3(S0) USB4(S0) USB5(S0) P0P4(S0)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 266MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz ("GenuineIntel" 686-class) 1.87 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P2)
acpiprt2 at acpi0: bus 4 (P0P1)
acpiprt3 at acpi0: bus -1 (P0P5)
acpiprt4 at acpi0: bus -1 (P0P6)
acpiprt5 at acpi0: bus -1 (P0P7)
acpiprt6 at acpi0: bus 2 (P0P8)
acpiprt7 at acpi0: bus -1 (P0P9)
acpiprt8 at acpi0: bus 3 (P0P4)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xe200 0xce800/0x3000!
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82G965 Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82G965 PCIE" rev 0x02: apic 2 int 16 (irq 11)
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "ATI", unknown product 0x554b rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: no integrated graphics
direct rendering for vga1 unsupported
vendor "ATI", unknown product 0x556b (class display subclass miscellaneous, rev 0x00) at pci1 dev 0 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 16 (irq 11)
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 17 (irq 10)
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 18 (irq 5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x02: apic 2 int 22 (irq 3)
azalia0: codec[s]: Analog Devices/0x1988
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x02: apic 2 int 17 (irq 10)
pci2 at ppb1 bus 3
ppb2 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x02: apic 2 int 17 (irq 10)
pci3 at ppb2 bus 2
jmb0 at pci3 dev 0 function 0 "JMicron JMB363 IDE/SATA" rev 0x02
ahci0 at jmb0: apic 2 int 16 (irq 11), AHCI 1.0
scsibus0 at ahci0: 32 targets
jmb1 at pci3 dev 0 function 1 "JMicron JMB363 IDE/SATA" rev 0x02
pciide0 at jmb1: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 2 int 17 (irq 0) for native-PCI interrupt
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 23 (irq 14)
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 19 (irq 15)
uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x02: apic 2 int 18 (irq 5)
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 23 (irq 14)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xf2
pci4 at ppb3 bus 4
re0 at pci4 dev 4 function 0 "D-Link Systems DGE-528T" rev 0x10: RTL8169/8110SB (0x1000), apic 2 int 17 (irq 10), address 00:1c:f0:ba:bf:40
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 3
ichpcib0 at pci0 dev 31 function 0 "Intel 82801H LPC" rev 0x02: PM disabled
pciide1 at pci0 dev 31 function 2 "Intel 82801H SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 19 (irq 15) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD800JD-75MSA3>
wd0: 16-sector PIO, LBA48, 76293MB, 156250000 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x02: apic 2 int 18 (irq 15)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-4200CL3
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-4200CL3
pciide2 at pci0 dev 31 function 5 "Intel 82801H SATA" rev 0x02: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide2: using apic 2 int 19 (irq 15) for native-PCI interrupt
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x23
lm1 at wbsio0 port 0x290/8: W83627DHG
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
mtrr: Pentium Pro MTRR support
uhidev0 at uhub5 port 2 configuration 1 interface 0 "MouseCenter LASER Gamer Mouse" rev 1.10/51.04 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 8 buttons and Z dir.
wsmouse0 at ums0 mux 0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
cloning vnode
clone of vnode 0xd9d07550 is vnode 0xd9d075e4
OpenBSD 4.3-beta (GENERIC.DRM) #0: Wed Feb 27 19:15:54 GMT 2008
    oga@jessica.cybernetseraph.org:/home/oga/trees/scatter_dma/arch/i386/compile/GENERIC.DRM
cpu0: Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz ("GenuineIntel" 686-class) 1.87 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem  = 2129817600 (2031MB)
avail mem = 2051375104 (1956MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 07/25/07, BIOS32 rev. 0 @ 0xf0010, SMBIOS rev. 2.4 @ 0xf0690 (70 entries)
bios0: vendor American Megatrends Inc. version "1001" date 07/25/2007
bios0: ASUSTeK Computer INC. P5B-VM
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC MCFG OEMB HPET GSCI
acpi0: wakeup devices P0P2(S0) P0P1(S0) UAR1(S0) PS2K(S0) PS2M(S0) EUSB(S0) USBE(S0) P0P5(S0) P0P6(S0) P0P7(S0) P0P8(S0) P0P9(S0) USB0(S0) USB1(S0) USB2(S0) USB3(S0) USB4(S0) USB5(S0) P0P4(S0)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 266MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz ("GenuineIntel" 686-class) 1.87 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P2)
acpiprt2 at acpi0: bus 4 (P0P1)
acpiprt3 at acpi0: bus -1 (P0P5)
acpiprt4 at acpi0: bus -1 (P0P6)
acpiprt5 at acpi0: bus -1 (P0P7)
acpiprt6 at acpi0: bus 2 (P0P8)
acpiprt7 at acpi0: bus -1 (P0P9)
acpiprt8 at acpi0: bus 3 (P0P4)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xe200 0xce800/0x3000!
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82G965 Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82G965 PCIE" rev 0x02: apic 2 int 16 (irq 11)
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "ATI", unknown product 0x554b rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: no integrated graphics
direct rendering for vga1 unsupported
vendor "ATI", unknown product 0x556b (class display subclass miscellaneous, rev 0x00) at pci1 dev 0 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 16 (irq 11)
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 17 (irq 10)
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 18 (irq 5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x02: apic 2 int 22 (irq 3)
azalia0: codec[s]: Analog Devices/0x1988
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x02: apic 2 int 17 (irq 10)
pci2 at ppb1 bus 3
ppb2 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x02: apic 2 int 17 (irq 10)
pci3 at ppb2 bus 2
jmb0 at pci3 dev 0 function 0 "JMicron JMB363 IDE/SATA" rev 0x02
ahci0 at jmb0: apic 2 int 16 (irq 11), AHCI 1.0
scsibus0 at ahci0: 32 targets
jmb1 at pci3 dev 0 function 1 "JMicron JMB363 IDE/SATA" rev 0x02
pciide0 at jmb1: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 2 int 17 (irq 0) for native-PCI interrupt
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 23 (irq 14)
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 19 (irq 15)
uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x02: apic 2 int 18 (irq 5)
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 23 (irq 14)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xf2
pci4 at ppb3 bus 4
re0 at pci4 dev 4 function 0 "D-Link Systems DGE-528T" rev 0x10: RTL8169/8110SB (0x1000), apic 2 int 17 (irq 10), address 00:1c:f0:ba:bf:40
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 3
ichpcib0 at pci0 dev 31 function 0 "Intel 82801H LPC" rev 0x02: PM disabled
pciide1 at pci0 dev 31 function 2 "Intel 82801H SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 19 (irq 15) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD800JD-75MSA3>
wd0: 16-sector PIO, LBA48, 76293MB, 156250000 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x02: apic 2 int 18 (irq 15)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-4200CL3
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-4200CL3
pciide2 at pci0 dev 31 function 5 "Intel 82801H SATA" rev 0x02: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide2: using apic 2 int 19 (irq 15) for native-PCI interrupt
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x23
lm1 at wbsio0 port 0x290/8: W83627DHG
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
mtrr: Pentium Pro MTRR support
uhidev0 at uhub5 port 2 configuration 1 interface 0 "MouseCenter LASER Gamer Mouse" rev 1.10/51.04 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 8 buttons and Z dir.
wsmouse0 at ums0 mux 0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
cloning vnode
clone of vnode 0xd9d31144 is vnode 0xd9d311d8