Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.27.7-4-pae (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2008-11-25 00:02:37 +0100 PAT WC disabled due to known CPU erratum. BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fde0000 (usable) BIOS-e820: 000000003fde0000 - 000000003fde3000 (ACPI NVS) BIOS-e820: 000000003fde3000 - 000000003fdf0000 (ACPI data) BIOS-e820: 000000003fdf0000 - 000000003fe00000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) DMI 2.4 present. Phoenix BIOS detected: BIOS may corrupt low RAM, working it around. last_pfn = 0x3fde0 max_arch_pfn = 0x1000000 kernel direct mapping tables up to 38000000 @ 10000-15000 NX (Execute Disable) protection: active RAMDISK: 37ac7000 - 37fefc17 ACPI: RSDP 000F7CE0, 0014 (r0 IBM___) ACPI: RSDT 3FDE3000, 003C (r1 IBM___ RSS_____ 42302E31 AWRD 0) ACPI: FACP 3FDE3080, 0074 (r1 IBM___ RSS_____ 42302E31 AWRD 0) ACPI: DSDT 3FDE3100, 41E4 (r1 IBM___ AWRDACPI 1000 MSFT 3000000) ACPI: FACS 3FDE0000, 0040 ACPI: HPET 3FDE7380, 0038 (r1 IBM___ RSS_____ 42302E31 AWRD 98) ACPI: MCFG 3FDE73C0, 003C (r1 IBM___ RSS_____ 42302E31 AWRD 0) ACPI: APIC 3FDE7300, 005A (r1 IBM___ RSS_____ 42302E31 AWRD 0) ACPI: BOOT 3FDE7400, 0028 (r1 IBM___ RSS_____ 42302E31 AWRD 0) ACPI: SLIC 3FDE7440, 0176 (r1 IBM___ RSS_____ 42302E31 AWRD 0) ACPI: Local APIC address 0xfee00000 NUMA - single node, flat memory mode Node: 0, start_pfn: 0, end_pfn: 3fde0 Setting physnode_map array to node 0 for pfns: 0 4000 8000 c000 10000 14000 18000 1c000 20000 24000 28000 2c000 30000 34000 38000 3c000 node 0 pfn: [0 - 3fde0] Reserving 2560 pages of KVA for lmem_map of node 0 at 3f200 remove_active_range (0, 258560, 261120) Reserving total of a00 pages for numa KVA remap kva_start_pfn ~ 37000 max_low_pfn ~ 38000 max_pfn = 3fde0 125MB HIGHMEM available. 896MB LOWMEM available. max_low_pfn = 38000, highstart_pfn = 38000 Low memory ends at vaddr f8000000 node 0 will remap to vaddr f7000000 - f7a00000 allocate_pgdat: node 0 NODE_DATA f7000000 remap_numa_kva: node 0 remap_numa_kva: f7000000 to pfn 0003f200 remap_numa_kva: f7200000 to pfn 0003f400 remap_numa_kva: f7400000 to pfn 0003f600 remap_numa_kva: f7600000 to pfn 0003f800 remap_numa_kva: f7800000 to pfn 0003fa00 High memory starts at vaddr f8000000 mapped low ram: 0 - 38000000 low ram: 00000000 - 38000000 bootmap 00014000 - 0001b000 (11 early reservations) ==> bootmem [0000000000 - 0038000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 00006764dc] TEXT DATA BSS ==> [0000100000 - 00006764dc] #4 [0037ac7000 - 0037fefc17] RAMDISK ==> [0037ac7000 - 0037fefc17] #5 [0000677000 - 000067f000] INIT_PG_TABLE ==> [0000677000 - 000067f000] #6 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #7 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000] #8 [003f200000 - 003fc00000] KVA RAM #9 [0037000000 - 0037a00000] KVA PG ==> [0037000000 - 0037a00000] #10 [0000014000 - 000001b000] BOOTMAP ==> [0000014000 - 000001b000] found SMP MP-table at [c00f3950] 000f3950 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x00038000 HighMem 0x00038000 -> 0x0003fde0 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0003f200 0: 0x0003fc00 -> 0x0003fde0 On node 0 totalpages: 258927 free_area_init_node: node 0, pgdat f7000000, node_mem_map f7002240 DMA zone: 3947 pages, LIFO batch:0 Normal zone: 223300 pages, LIFO batch:31 HighMem zone: 29380 pages, LIFO batch:7 Using APIC driver default ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 1 CPUs, 0 hotplug CPUs mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 40000000 (gap: 3fe00000:a0200000) PERCPU: Allocating 40092 bytes of per cpu data NR_CPUS: 128, nr_cpu_ids: 1, nr_node_ids 8 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256627 Policy zone: HighMem Kernel command line: root=/dev/disk/by-id/ata-WD1601ABYS-23C0A0_39M4507_42C0462IBM_WD-WCAS29473740-part3 resume=/dev/disk/by-id/ata-WD1601ABYS-23C0A0_39M4507_42C0462IBM_WD-WCAS29473740-part1 splash=silent vga=0x303 bootsplash: silent mode. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) TSC: PIT calibration confirmed by PMTIMER. TSC: using PIT calibration value Detected 997.492 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Initializing HighMem for node 0 (00038000:0003fde0) Memory: 1013672k/1046400k available (2423k kernel code, 22036k reserved, 1969k data, 328k init, 118656k highmem) virtual kernel memory layout: fixmap : 0xff8b6000 - 0xfffff000 (7460 kB) pkmap : 0xff400000 - 0xff600000 (2048 kB) vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0552000 - 0xc05a4000 ( 328 kB) .data : 0xc035ddbb - 0xc054a200 (1969 kB) .text : 0xc0100000 - 0xc035ddbb (2423 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated hpet clockevent registered Calibrating delay loop (skipped), value calculated using timer frequency.. 1994.98 BogoMIPS (lpj=3989968) kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved Security Framework initialized SELinux: Disabled at boot. AppArmor: AppArmor initialized Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 12k freed ACPI: Core revision 20080609 ACPI: Checking initramfs for custom DSDT Parsing all Control Methods: Table [DSDT](id 0001) - 630 Objects with 60 Devices 170 Methods 36 Regions tbxface-0596 [00] tb_load_namespace : ACPI Tables successfully acquired evxfevnt-0091 [00] enable : Transition to ACPI mode successful Mapping cpu 0 to node 0 ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Celeron(R) M processor 1.00GHz stepping 08 Brought up 1 CPUs Total of 1 processors activated (1994.98 BogoMIPS). CPU0 attaching NULL sched-domain. net_namespace: 1044 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access perfmon: version 2.82 perfmon: CPU hotplug support enabled evgpeblk-0957 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 ACPI: EC: Look up EC in DSDT Completing Region/Field/Buffer/Package initialization:......................................................................................... Initialized 32/36 Regions 9/9 Fields 22/22 Buffers 26/26 Packages (639 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:... Executed 3 _INI methods requiring 1 _STA executions (examined 67 objects) evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 9 Wake, Enabled 1 Runtime GPEs in this block ACPI: Interpreter enabled ACPI: (supports S0 S1 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: 0000:00:02.0 reg 10 32bit mmio: [fde80000, fdefffff] PCI: 0000:00:02.0 reg 14 io port: [ff00, ff07] PCI: 0000:00:02.0 reg 18 32bit mmio: [d0000000, dfffffff] PCI: 0000:00:02.0 reg 1c 32bit mmio: [fdf80000, fdfbffff] PCI: 0000:00:02.1 reg 10 32bit mmio: [fdf00000, fdf7ffff] PCI: 0000:00:1b.0 reg 10 64bit mmio: [fdff8000, fdffbfff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled PCI: 0000:00:1d.0 reg 20 io port: [fe00, fe1f] PCI: 0000:00:1d.1 reg 20 io port: [fd00, fd1f] PCI: 0000:00:1d.2 reg 20 io port: [fc00, fc1f] PCI: 0000:00:1d.3 reg 20 io port: [fb00, fb1f] PCI: 0000:00:1d.7 reg 10 32bit mmio: [fdfff000, fdfff3ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO PCI: 0000:00:1f.2 reg 10 io port: [0, 7] PCI: 0000:00:1f.2 reg 14 io port: [0, 3] PCI: 0000:00:1f.2 reg 18 io port: [0, 7] PCI: 0000:00:1f.2 reg 1c io port: [0, 3] PCI: 0000:00:1f.2 reg 20 io port: [fa00, fa0f] PCI: 0000:00:1f.2 reg 24 32bit mmio: [fdffe000, fdffe3ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled PCI: 0000:00:1f.3 reg 20 io port: [500, 51f] PCI: 0000:01:00.0 reg 10 64bit mmio: [fddf0000, fddfffff] pci 0000:01:00.0: PME# supported from D3hot D3cold pci 0000:01:00.0: PME# disabled PCI: bridge 0000:00:1c.0 io port: [d000, dfff] PCI: bridge 0000:00:1c.0 32bit mmio: [fdd00000, fddfffff] PCI: bridge 0000:00:1c.0 64bit mmio pref: [fda00000, fdafffff] PCI: 0000:02:02.0 reg 10 io port: [ef00, ef0f] PCI: 0000:02:02.0 reg 14 32bit mmio: [fdcff000, fdcff3ff] PCI: 0000:02:02.1 reg 10 io port: [ee00, ee07] PCI: 0000:02:02.1 reg 14 io port: [ed00, ed07] PCI: 0000:02:02.1 reg 18 io port: [ec00, ec07] PCI: 0000:02:02.1 reg 1c io port: [eb00, eb07] PCI: 0000:02:02.1 reg 20 io port: [ea00, ea07] PCI: 0000:02:02.1 reg 24 io port: [e900, e907] pci 0000:00:1e.0: transparent bridge PCI: bridge 0000:00:1e.0 io port: [e000, efff] PCI: bridge 0000:00:1e.0 32bit mmio: [fdc00000, fdcfffff] PCI: bridge 0000:00:1e.0 64bit mmio pref: [fdb00000, fdbfffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz AppArmor: AppArmor Filesystem Enabled ACPI: RTC can wake from S4 system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x280-0x2df has been reserved system 00:01: ioport range 0x880-0x88f has been reserved system 00:0a: ioport range 0x400-0x4bf could not be reserved system 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved system 00:0d: iomem range 0xf0000-0xfffff could not be reserved system 00:0d: iomem range 0xfed00000-0xfed000ff has been reserved system 00:0d: iomem range 0x3fde0000-0x3fdfffff could not be reserved system 00:0d: iomem range 0x0-0x9ffff could not be reserved system 00:0d: iomem range 0x100000-0x3fddffff could not be reserved system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0d: iomem range 0xfed13000-0xfed1dfff has been reserved system 00:0d: iomem range 0xfed20000-0xfed8ffff has been reserved system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved system 00:0d: iomem range 0xffb00000-0xffb7ffff could not be reserved system 00:0d: iomem range 0xfff00000-0xffffffff could not be reserved system 00:0d: iomem range 0xe0000-0xeffff has been reserved Switched to high resolution mode on CPU 0 pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 pci 0000:00:1c.0: IO window: 0xd000-0xdfff pci 0000:00:1c.0: MEM window: 0xfdd00000-0xfddfffff pci 0000:00:1c.0: PREFETCH window: 0x000000fda00000-0x000000fdafffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1e.0: IO window: 0xe000-0xefff pci 0000:00:1e.0: MEM window: 0xfdc00000-0xfdcfffff pci 0000:00:1e.0: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 01 index 0 io port: [d000, dfff] bus: 01 index 1 mmio: [fdd00000, fddfffff] bus: 01 index 2 mmio: [fda00000, fdafffff] bus: 01 index 3 mmio: [0, 0] bus: 02 index 0 io port: [e000, efff] bus: 02 index 1 mmio: [fdc00000, fdcfffff] bus: 02 index 2 mmio: [fdb00000, fdbfffff] bus: 02 index 3 io port: [0, ffff] bus: 02 index 4 mmio: [0, ffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... done Freeing initrd memory: 5283k freed Simple Boot Flag at 0x34 set to 0x1 Machine check exception polling timer started. audit: initializing netlink socket (disabled) type=2000 audit(1228796838.880:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 439 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) perfmon: added sampling format default pci 0000:00:02.0: Boot video device pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pci_express 0000:00:1c.0:pcie03: allocate port service vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 704k, total 704k vesafb: mode is 800x600x8, linelength=832, pages=0 vesafb: scrolling: redraw vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 Console: switching to colour frame buffer device 100x37 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver8 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A vendor=8086 device=2448 serial 0000:02:02.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 0000:02:02.1: ttyS4 at I/O 0xee00 (irq = 17) is a 16550A 0000:02:02.1: ttyS5 at I/O 0xed00 (irq = 17) is a 16550A 0000:02:02.1: ttyS6 at I/O 0xec00 (irq = 17) is a 16550A 0000:02:02.1: ttyS7 at I/O 0xeb00 (irq = 17) is a 16550A 0000:02:02.1: ttyS2 at I/O 0xea00 (irq = 17) is a 16550A 0000:02:02.1: ttyS3 at I/O 0xe900 (irq = 17) is a 16550A PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered Using IPI No-Shortcut mode registered taskstats version 1 Freeing unused kernel memory: 328k freed Write protecting the kernel text: 2424k Write protecting the kernel read-only data: 1788k input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 processor ACPI_CPU:00: registered as cooling_device0 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Unable to turn cooling device [f6c4584c] 'on' ACPI: Thermal Zone [THRM] (50 C) ACPI: No dock devices found. SCSI subsystem initialized libata version 3.00 loaded. ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0x5 impl IDE mode ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 19 ata2: DUMMY ata3: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe200 irq 19 ata4: DUMMY input: PS/2 Logitech Mouse as /devices/platform/i8042/serio1/input/input1 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-8: WD1601ABYS-23C0A0 39M4507 42C0462IBM, 06.06H05, max UDMA/133 ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 ata3: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA WD1601ABYS-23C0A 06.0 PQ: 0 ANSI: 5 Uniform Multi-Platform E-IDE driver fan PNP0C0B:00: registered as cooling_device1 ACPI: Fan [FAN] (on) BIOS EDD facility v0.16 2004-Jun-25, 1 devices found udevd version 128 started usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fe00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160GB/149GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160GB/149GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27.7-4-pae uhci_hcd usb usb1: SerialNumber: 0000:00:1d.0 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fd00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27.7-4-pae uhci_hcd usb usb2: SerialNumber: 0000:00:1d.1 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fc00 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb 1-1: new full speed USB device using uhci_hcd and address 2 usb 1-1: configuration #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.27.7-4-pae uhci_hcd usb usb3: SerialNumber: 0000:00:1d.2 uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fb00 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 1-1: New USB device found, idVendor=04b3, idProduct=3016 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1: Product: USB 1.1 2 port downstream low-power hub usb 1-1: Manufacturer: Lite-On Tech usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.27.7-4-pae uhci_hcd usb usb4: SerialNumber: 0000:00:1d.3 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000 usb 3-2: new full speed USB device using uhci_hcd and address 2 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected hub 3-0:1.0: unable to enumerate USB device on port 2 hub 1-1:1.0: hub_port_status failed (err = -71) hub 1-1:1.0: hub_port_status failed (err = -71) usb 1-1: USB disconnect, address 2 usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: EHCI Host Controller usb usb5: Manufacturer: Linux 2.6.27.7-4-pae ehci_hcd usb usb5: SerialNumber: 0000:00:1d.7 PM: Starting manual resume from disk usb 5-6: new high speed USB device using ehci_hcd and address 3 usb 5-6: configuration #1 chosen from 1 choice hub 5-6:1.0: USB hub found hub 5-6:1.0: 4 ports detected usb 5-6: New USB device found, idVendor=0424, idProduct=2514 usb 5-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. usb 5-8: new high speed USB device using ehci_hcd and address 4 usb 5-8: configuration #1 chosen from 1 choice usb 5-8: New USB device found, idVendor=0930, idProduct=6540 usb 5-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 5-8: Product: TransMemory usb 5-8: Manufacturer: TOSHIBA usb 5-8: SerialNumber: 0EC1E17091D3399D usb 1-1: new full speed USB device using uhci_hcd and address 3 usb 1-1: configuration #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected usb 1-1: New USB device found, idVendor=04b3, idProduct=3016 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1: Product: USB 1.1 2 port downstream low-power hub usb 1-1: Manufacturer: Lite-On Tech usb 1-1.3: new low speed USB device using uhci_hcd and address 4 usb 1-1.3: configuration #1 chosen from 1 choice usb 1-1.3: New USB device found, idVendor=04b3, idProduct=3019 usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.3: Product: IBM USB Travel Keyboard with UltraNav usb 1-1.3: Manufacturer: Lite-On Tech usb 1-1.4: new low speed USB device using uhci_hcd and address 5 usb 1-1.4: configuration #1 chosen from 1 choice usb 1-1.4: New USB device found, idVendor=06cb, idProduct=0009 usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.4: Product: Composite TouchPad / TrackPoint usb 1-1.4: Manufacturer: Synaptics Inc. udevd version 128 started Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 915GM Chipset agpgart-intel 0000:00:00.0: detected 764K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 usbcore: registered new interface driver hiddev input: Lite-On Tech IBM USB Travel Keyboard with UltraNav as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input2 input,hidraw0: USB HID v1.00 Keyboard [Lite-On Tech IBM USB Travel Keyboard with UltraNav] on usb-0000:00:1d.0-1.3 tg3.c:v3.94 (August 14, 2008) vendor=8086 device=2660 tg3 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 tg3 0000:01:00.0: setting latency timer to 64 input: Lite-On Tech IBM USB Travel Keyboard with UltraNav as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.3/1-1.3:1.1/input/input3 input,hidraw1: USB HID v1.00 Device [Lite-On Tech IBM USB Travel Keyboard with UltraNav] on usb-0000:00:1d.0-1.3 input: Synaptics Inc. Composite TouchPad / TrackPoint as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input4 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 HDA Intel 0000:00:1b.0: setting latency timer to 64 input,hidraw2: USB HID v1.00 Mouse [Synaptics Inc. Composite TouchPad / TrackPoint] on usb-0000:00:1d.0-1.4 input: Synaptics Inc. Composite TouchPad / TrackPoint as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.4/1-1.4:1.1/input/input5 ACPI: Unable to turn cooling device [f6c4584c] 'on' input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 input,hidraw3: USB HID v1.00 Mouse [Synaptics Inc. Composite TouchPad / TrackPoint] on usb-0000:00:1d.0-1.4 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input7 ACPI: Power Button (CM) [PWRB] eth0: Tigon3 [partno(BCM95906) rev c002 PHY(5906)] (PCI Express) 10/100Base-TX Ethernet 00:1e:37:81:df:18 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] Initializing USB Mass Storage driver... scsi4 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning intel_rng: Firmware space is locked read-only. If you can't or intel_rng: don't want to disable this in firmware setup, and if intel_rng: you are certain that your system has a functional intel_rng: RNG, try using the 'no_fwh_detect' option. iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) sd 0:0:0:0: Attached scsi generic sg0 type 0 i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 input: PC Speaker as /devices/platform/pcspkr/input/input8 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, hpet irqs scsi 4:0:0:0: Direct-Access TOSHIBA TransMemory 6.50 PQ: 0 ANSI: 0 CCS sd 4:0:0:0: [sdb] 3903487 512-byte hardware sectors: (1.99GB/1.86GiB) sd 4:0:0:0: [sdb] Write Protect is off sd 4:0:0:0: [sdb] Mode Sense: 45 00 00 08 sd 4:0:0:0: [sdb] Assuming drive cache: write through sd 4:0:0:0: [sdb] 3903487 512-byte hardware sectors: (1.99GB/1.86GiB) sd 4:0:0:0: [sdb] Write Protect is off sd 4:0:0:0: [sdb] Mode Sense: 45 00 00 08 sd 4:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 sd 4:0:0:0: [sdb] Attached SCSI removable disk sd 4:0:0:0: Attached scsi generic sg1 type 0 usb-storage: device scan complete hda_codec: num_steps = 0 for NID=0x1f (ctl = Digital Mic Boost) Adding 2096472k swap on /dev/sda1. Priority:-1 extents:1 across:2096472k device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com loop: module loaded kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. fuse init (API version 7.9) type=1505 audit(1228796850.748:2): operation="profile_load" name="/bin/ping" name2="default" pid=1457 type=1505 audit(1228796850.900:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=1483 type=1505 audit(1228796851.148:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=1495 type=1505 audit(1228796851.372:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=1506 ACPI: Unable to turn cooling device [f6c4584c] 'on' type=1505 audit(1228796851.652:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=1522 type=1505 audit(1228796851.868:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=1541 type=1505 audit(1228796852.080:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=1552 type=1505 audit(1228796852.280:9): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=1558 type=1505 audit(1228796852.728:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=1559 type=1505 audit(1228796852.896:11): operation="profile_load" name="/usr/sbin/traceroute" name2="default" pid=1603 IA-32 Microcode Update Driver: v1.14a firmware: requesting intel-ucode/06-0d-08 NET: Registered protocol family 10 lo: Disabled Privacy Extensions powernow: This module only works with AMD K7 CPUs [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 [drm] Initialized i915 1.6.0 20060119 on minor 0 [drm:i915_getparam] *ERROR* Unknown parameter 5 [drm:i915_getparam] *ERROR* Unknown parameter 5 ADDRCONF(NETDEV_UP): eth0: link is not ready tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is off for TX and off for RX. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready NET: Registered protocol family 17 eth0: no IPv6 routers present [drm:i915_getparam] *ERROR* Unknown parameter 5 hda_codec: num_steps = 0 for NID=0x1f (ctl = Digital Mic Boost) [drm:i915_getparam] *ERROR* Unknown parameter 5 hda_codec: num_steps = 0 for NID=0x1f (ctl = Digital Mic Boost) hda_codec: num_steps = 0 for NID=0x1f (ctl = Digital Mic Boost) hda_codec: num_steps = 0 for NID=0x1f (ctl = Digital Mic Boost) Bluetooth: Core ver 2.13 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.11 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.10 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bridge firewalling registered pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized