[ 0.000000] BIOS EBDA/lowmem at: 0009f000/0009f000 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 2.6.28.drazzib (root@gauloise) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Sat Jan 3 15:16:01 CET 2009 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.28.drazzib root=/dev/mapper/gauloise-root ro quiet [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfef0000 (usable) [ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cfef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfef3000 - 00000000cff00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f2000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around. [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x3ffffffff [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xcfef0 max_arch_pfn = 0x3ffffffff [ 0.000000] init_memory_mapping: 0000000000000000-00000000cfef0000 [ 0.000000] 0000000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cfef0000 page 4k [ 0.000000] kernel direct mapping tables up to cfef0000 @ 10000-16000 [ 0.000000] last_map_addr: cfef0000 end: cfef0000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000 [ 0.000000] 0100000000 - 0130000000 page 2M [ 0.000000] kernel direct mapping tables up to 130000000 @ 14000-1a000 [ 0.000000] last_map_addr: 130000000 end: 130000000 [ 0.000000] RAMDISK: 377bb000 - 37fefbdb [ 0.000000] ACPI: RSDP 000F7630, 0024 (r2 Nvidia) [ 0.000000] ACPI: XSDT CFEF30C0, 004C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP CFEF9A40, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (8) does not match PM1_EVT_LEN (4) [ 0.000000] ACPI: DSDT CFEF3240, 67BC (r1 NVIDIA ASUSACPI 1000 MSFT 3000000) [ 0.000000] ACPI: FACS CFEF0000, 0040 [ 0.000000] ACPI: HPET CFEF9C80, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD 98) [ 0.000000] ACPI: MCFG CFEF9D00, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: APIC CFEF9B80, 0098 (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: SSDT CFEFA580, 087B (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000130000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000 [ 0.000000] NODE_DATA [0000000000015000 - 0000000000019fff] [ 0.000000] bootmap [000000000001a000 - 000000000003ffff] pages 26 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0130000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 0000728e28] TEXT DATA BSS ==> [0000200000 - 0000728e28] [ 0.000000] #3 [00377bb000 - 0037fefbdb] RAMDISK ==> [00377bb000 - 0037fefbdb] [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #5 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000] [ 0.000000] #6 [0000014000 - 0000015000] PGTABLE ==> [0000014000 - 0000015000] [ 0.000000] found SMP MP-table at [ffff8800000f5af0] 000f5af0 [ 0.000000] [ffffe20000000000-ffffe200043fffff] PMD -> [ffff880028200000-ffff88002bbfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00130000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cfef0 [ 0.000000] 0: 0x00100000 -> 0x00130000 [ 0.000000] On node 0 totalpages: 1048191 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1427 pages reserved [ 0.000000] DMA zone: 2500 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833320 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cfef3000 [ 0.000000] PM: Registered nosave memory: 00000000cfef3000 - 00000000cff00000 [ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f2000000 [ 0.000000] PM: Registered nosave memory: 00000000f2000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: cff00000:20100000) [ 0.000000] PERCPU: Allocating 49152 bytes of per cpu data [ 0.000000] per cpu data for cpu0 on node0 at 0000000028022000 [ 0.000000] per cpu data for cpu1 on node0 at 000000002802e000 [ 0.000000] per cpu data for cpu2 on node0 at 000000002803a000 [ 0.000000] per cpu data for cpu3 on node0 at 0000000028046000 [ 0.000000] NR_CPUS: 32, nr_cpu_ids: 4, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1029740 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.28.drazzib root=/dev/mapper/gauloise-root ro quiet [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2500.211 MHz processor. [ 0.004000] spurious 8259A interrupt: IRQ7. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Checking aperture... [ 0.004000] No AGP bridge found [ 0.004000] Calgary: detecting Calgary via BIOS EBDA area [ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.004000] Placing software IO TLB between 0x20000000 - 0x24000000 [ 0.004000] Memory: 4053296k/4980736k available (2535k kernel code, 787972k absent, 139468k reserved, 1287k data, 524k init) [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5000.42 BogoMIPS (lpj=10000844) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.004000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.004055] Mount-cache hash table entries: 256 [ 0.004183] Initializing cgroup subsys ns [ 0.004186] Initializing cgroup subsys cpuacct [ 0.004188] Initializing cgroup subsys freezer [ 0.004207] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004208] CPU: L2 cache: 3072K [ 0.004210] CPU 0/0x0 -> Node 0 [ 0.004212] CPU: Physical Processor ID: 0 [ 0.004213] CPU: Processor Core ID: 0 [ 0.004219] CPU0: Thermal monitoring enabled (TM2) [ 0.004220] using mwait in idle threads. [ 0.005971] ACPI: Core revision 20080926 [ 0.014530] Setting APIC routing to flat [ 0.015026] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.054722] CPU0: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07 [ 0.056001] Booting processor 1 APIC 0x3 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 5000.01 BogoMIPS (lpj=10000024) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU 1/0x3 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 3 [ 0.004000] CPU1: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.140965] CPU1: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07 [ 0.140983] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.144089] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.004000] Initializing CPU#2 [ 0.004000] Calibrating delay using timer specific routine.. 4999.99 BogoMIPS (lpj=9999992) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU 2/0x2 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 2 [ 0.004000] CPU2: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.236897] CPU2: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07 [ 0.236914] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.240101] Booting processor 3 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#3 [ 0.004000] Calibrating delay using timer specific routine.. 4999.98 BogoMIPS (lpj=9999960) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU 3/0x1 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] CPU3: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.328868] CPU3: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07 [ 0.328886] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.332027] Brought up 4 CPUs [ 0.332029] Total of 4 processors activated (20000.41 BogoMIPS). [ 0.332111] CPU0 attaching sched-domain: [ 0.332113] domain 0: span 0,3 level MC [ 0.332115] groups: 0 3 [ 0.332117] domain 1: span 0-3 level CPU [ 0.332119] groups: 0,3 1-2 [ 0.332121] domain 2: span 0-3 level NODE [ 0.332123] groups: 0-3 [ 0.332130] CPU1 attaching sched-domain: [ 0.332131] domain 0: span 1-2 level MC [ 0.332133] groups: 1 2 [ 0.332135] domain 1: span 0-3 level CPU [ 0.332136] groups: 1-2 0,3 [ 0.332138] domain 2: span 0-3 level NODE [ 0.332140] groups: 0-3 [ 0.332142] CPU2 attaching sched-domain: [ 0.332143] domain 0: span 1-2 level MC [ 0.332145] groups: 2 1 [ 0.332147] domain 1: span 0-3 level CPU [ 0.332148] groups: 1-2 0,3 [ 0.332150] domain 2: span 0-3 level NODE [ 0.332151] groups: 0-3 [ 0.332154] CPU3 attaching sched-domain: [ 0.332155] domain 0: span 0,3 level MC [ 0.332156] groups: 3 0 [ 0.332158] domain 1: span 0-3 level CPU [ 0.332160] groups: 0,3 1-2 [ 0.332162] domain 2: span 0-3 level NODE [ 0.332163] groups: 0-3 [ 0.332220] net_namespace: 1400 bytes [ 0.332220] Booting paravirtualized kernel on bare hardware [ 0.332220] regulator: core version 0.5 [ 0.332220] NET: Registered protocol family 16 [ 0.332220] ACPI: bus type pci registered [ 0.332220] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 31 [ 0.332220] PCI: MCFG area at f0000000 reserved in E820 [ 0.333541] PCI: Using MMCONFIG at f0000000 - f1ffffff [ 0.333543] PCI: Using configuration type 1 for base access [ 0.336760] ACPI: EC: Look up EC in DSDT [ 0.347262] ACPI: Interpreter enabled [ 0.347264] ACPI: (supports S0 S1 S3 S4 S5) [ 0.347286] ACPI: Using IOAPIC for interrupt routing [ 0.356148] ACPI: No dock devices found. [ 0.356154] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.360271] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.360274] pci 0000:00:03.0: PME# disabled [ 0.360302] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.360304] pci 0000:00:06.0: PME# disabled [ 0.360329] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.360331] pci 0000:00:07.0: PME# disabled [ 0.360537] pci 0000:00:0a.1: reg 20 io port: [0x1c00-0x1c3f] [ 0.360542] pci 0000:00:0a.1: reg 24 io port: [0x1c80-0x1cbf] [ 0.360554] pci 0000:00:0a.1: PME# supported from D3hot D3cold [ 0.360559] pci 0000:00:0a.1: PME# disabled [ 0.360620] pci 0000:00:0b.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff] [ 0.360642] pci 0000:00:0b.0: supports D1 D2 [ 0.360644] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.360647] pci 0000:00:0b.0: PME# disabled [ 0.360671] pci 0000:00:0b.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff] [ 0.360693] pci 0000:00:0b.1: supports D1 D2 [ 0.360694] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.360697] pci 0000:00:0b.1: PME# disabled [ 0.360733] pci 0000:00:0d.0: reg 20 io port: [0xfd00-0xfd0f] [ 0.360768] pci 0000:00:0e.0: reg 10 io port: [0x9f0-0x9f7] [ 0.360772] pci 0000:00:0e.0: reg 14 io port: [0xbf0-0xbf3] [ 0.360776] pci 0000:00:0e.0: reg 18 io port: [0x970-0x977] [ 0.360780] pci 0000:00:0e.0: reg 1c io port: [0xb70-0xb73] [ 0.360784] pci 0000:00:0e.0: reg 20 io port: [0xf800-0xf80f] [ 0.360788] pci 0000:00:0e.0: reg 24 32bit mmio: [0xfe02d000-0xfe02dfff] [ 0.360824] pci 0000:00:0f.0: reg 10 io port: [0x9e0-0x9e7] [ 0.360828] pci 0000:00:0f.0: reg 14 io port: [0xbe0-0xbe3] [ 0.360832] pci 0000:00:0f.0: reg 18 io port: [0x960-0x967] [ 0.360836] pci 0000:00:0f.0: reg 1c io port: [0xb60-0xb63] [ 0.360840] pci 0000:00:0f.0: reg 20 io port: [0xf300-0xf30f] [ 0.360844] pci 0000:00:0f.0: reg 24 32bit mmio: [0xfe02c000-0xfe02cfff] [ 0.360910] pci 0000:00:10.1: reg 10 32bit mmio: [0xfe024000-0xfe027fff] [ 0.360932] pci 0000:00:10.1: PME# supported from D3hot D3cold [ 0.360935] pci 0000:00:10.1: PME# disabled [ 0.360971] pci 0000:00:14.0: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff] [ 0.360980] pci 0000:00:14.0: reg 14 io port: [0xf200-0xf207] [ 0.360997] pci 0000:00:14.0: supports D1 D2 [ 0.360999] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.361001] pci 0000:00:14.0: PME# disabled [ 0.361054] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.361056] pci 0000:01:00.0: PME# disabled [ 0.361096] pci 0000:00:03.0: bridge io port: [0xa000-0xdfff] [ 0.361098] pci 0000:00:03.0: bridge 32bit mmio: [0xfd600000-0xfd9fffff] [ 0.361101] pci 0000:00:03.0: bridge 64bit mmio pref: [0xd0000000-0xefffffff] [ 0.361130] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.361133] pci 0000:02:00.0: PME# disabled [ 0.361164] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold [ 0.361167] pci 0000:02:01.0: PME# disabled [ 0.361196] pci 0000:02:02.0: PME# supported from D0 D3hot D3cold [ 0.361199] pci 0000:02:02.0: PME# disabled [ 0.361229] pci 0000:02:03.0: PME# supported from D0 D3hot D3cold [ 0.361232] pci 0000:02:03.0: PME# disabled [ 0.361259] pci 0000:01:00.0: bridge io port: [0xa000-0xdfff] [ 0.361262] pci 0000:01:00.0: bridge 32bit mmio: [0xfd600000-0xfd9fffff] [ 0.361266] pci 0000:01:00.0: bridge 64bit mmio pref: [0xd0000000-0xefffffff] [ 0.361297] pci 0000:03:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff] [ 0.361307] pci 0000:03:00.0: reg 18 64bit mmio: [0xfd9e0000-0xfd9effff] [ 0.361313] pci 0000:03:00.0: reg 20 io port: [0xde00-0xdeff] [ 0.361322] pci 0000:03:00.0: reg 30 32bit mmio: [0xfd9c0000-0xfd9dffff] [ 0.361330] pci 0000:03:00.0: supports D1 D2 [ 0.361372] pci 0000:03:00.1: reg 10 64bit mmio: [0xfd9fc000-0xfd9fffff] [ 0.361400] pci 0000:03:00.1: supports D1 D2 [ 0.361439] pci 0000:02:00.0: bridge io port: [0xd000-0xdfff] [ 0.361442] pci 0000:02:00.0: bridge 32bit mmio: [0xfd900000-0xfd9fffff] [ 0.361446] pci 0000:02:00.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.361476] pci 0000:02:01.0: bridge io port: [0xc000-0xcfff] [ 0.361479] pci 0000:02:01.0: bridge 32bit mmio: [0xfd800000-0xfd8fffff] [ 0.361483] pci 0000:02:01.0: bridge 64bit mmio pref: [0xeff00000-0xefffffff] [ 0.361513] pci 0000:02:02.0: bridge io port: [0xb000-0xbfff] [ 0.361516] pci 0000:02:02.0: bridge 32bit mmio: [0xfd700000-0xfd7fffff] [ 0.361520] pci 0000:02:02.0: bridge 64bit mmio pref: [0xefe00000-0xefefffff] [ 0.361551] pci 0000:02:03.0: bridge io port: [0xa000-0xafff] [ 0.361553] pci 0000:02:03.0: bridge 32bit mmio: [0xfd600000-0xfd6fffff] [ 0.361558] pci 0000:02:03.0: bridge 64bit mmio pref: [0xefd00000-0xefdfffff] [ 0.361610] pci 0000:00:06.0: bridge io port: [0x8000-0x8fff] [ 0.361613] pci 0000:00:06.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff] [ 0.361616] pci 0000:00:06.0: bridge 64bit mmio pref: [0xfde00000-0xfdefffff] [ 0.361652] pci 0000:00:07.0: bridge io port: [0xe000-0xefff] [ 0.361655] pci 0000:00:07.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff] [ 0.361658] pci 0000:00:07.0: bridge 64bit mmio pref: [0xfda00000-0xfdafffff] [ 0.361691] pci 0000:09:08.0: reg 10 32bit mmio: [0xfdcff000-0xfdcff7ff] [ 0.361697] pci 0000:09:08.0: reg 14 io port: [0x9f00-0x9f7f] [ 0.361723] pci 0000:09:08.0: supports D2 [ 0.361725] pci 0000:09:08.0: PME# supported from D2 D3hot D3cold [ 0.361728] pci 0000:09:08.0: PME# disabled [ 0.361755] pci 0000:00:10.0: transparent bridge [ 0.361758] pci 0000:00:10.0: bridge io port: [0x9000-0x9fff] [ 0.361760] pci 0000:00:10.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff] [ 0.361763] pci 0000:00:10.0: bridge 32bit mmio pref: [0xfdb00000-0xfdbfffff] [ 0.361778] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.362174] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.436912] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.436912] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.436912] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 *11 14 15) [ 0.436912] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.436912] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 *11 14 15) [ 0.436933] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 *10 11 14 15) [ 0.437090] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.437248] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.437408] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15) [ 0.437565] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.440029] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15) [ 0.440193] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.440352] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) [ 0.440510] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.440667] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.440826] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15) [ 0.440984] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15) [ 0.441146] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.441305] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) [ 0.441470] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15) [ 0.441669] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.441859] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.442049] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 0.442237] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.442426] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0 [ 0.442615] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0 [ 0.442803] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 0.442998] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 0.443188] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 0.443377] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 0.443567] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.443757] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. [ 0.443947] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 0.444146] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 0.444336] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 0.444526] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 0.444716] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 0.444905] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 0.445100] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.445291] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.445481] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 0.445541] usbcore: registered new interface driver usbfs [ 0.445541] usbcore: registered new interface driver hub [ 0.445541] usbcore: registered new device driver usb [ 0.445541] PCI: Using ACPI for IRQ routing [ 0.460044] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 [ 0.460048] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.484009] pnp: PnP ACPI init [ 0.484016] ACPI: bus type pnp registered [ 0.488797] pnp: PnP ACPI: found 12 devices [ 0.488798] ACPI: ACPI bus type pnp unregistered [ 0.488805] system 00:01: ioport range 0x1000-0x107f has been reserved [ 0.488807] system 00:01: ioport range 0x1080-0x10ff has been reserved [ 0.488809] system 00:01: ioport range 0x1400-0x147f has been reserved [ 0.488811] system 00:01: ioport range 0x1480-0x14ff has been reserved [ 0.488813] system 00:01: ioport range 0x1800-0x187f has been reserved [ 0.488815] system 00:01: ioport range 0x1880-0x18ff has been reserved [ 0.488819] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.488821] system 00:02: ioport range 0x800-0x87f has been reserved [ 0.488822] system 00:02: ioport range 0x290-0x297 has been reserved [ 0.488824] system 00:02: ioport range 0x880-0x88f has been reserved [ 0.488830] system 00:0a: iomem range 0xf0000000-0xf1ffffff has been reserved [ 0.488834] system 00:0b: iomem range 0xf0000-0xf3fff could not be reserved [ 0.488836] system 00:0b: iomem range 0xf4000-0xf7fff could not be reserved [ 0.488838] system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved [ 0.488840] system 00:0b: iomem range 0xfc000-0xfffff could not be reserved [ 0.488842] system 00:0b: iomem range 0xfeff0000-0xfeff00ff has been reserved [ 0.488844] system 00:0b: iomem range 0xcfef0000-0xcfefffff could not be reserved [ 0.488846] system 00:0b: iomem range 0xffff0000-0xffffffff has been reserved [ 0.488848] system 00:0b: iomem range 0x0-0x9ffff could not be reserved [ 0.488850] system 00:0b: iomem range 0x100000-0xcfeeffff could not be reserved [ 0.488852] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.488854] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.488856] system 00:0b: iomem range 0xfeff0000-0xfeff03ff could not be reserved [ 0.494294] pci 0000:02:00.0: PCI bridge, secondary bus 0000:03 [ 0.494297] pci 0000:02:00.0: IO window: 0xd000-0xdfff [ 0.494300] pci 0000:02:00.0: MEM window: 0xfd900000-0xfd9fffff [ 0.494304] pci 0000:02:00.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.494308] pci 0000:02:01.0: PCI bridge, secondary bus 0000:04 [ 0.494310] pci 0000:02:01.0: IO window: 0xc000-0xcfff [ 0.494314] pci 0000:02:01.0: MEM window: 0xfd800000-0xfd8fffff [ 0.494317] pci 0000:02:01.0: PREFETCH window: 0x000000eff00000-0x000000efffffff [ 0.494321] pci 0000:02:02.0: PCI bridge, secondary bus 0000:05 [ 0.494323] pci 0000:02:02.0: IO window: 0xb000-0xbfff [ 0.494327] pci 0000:02:02.0: MEM window: 0xfd700000-0xfd7fffff [ 0.494330] pci 0000:02:02.0: PREFETCH window: 0x000000efe00000-0x000000efefffff [ 0.494335] pci 0000:02:03.0: PCI bridge, secondary bus 0000:06 [ 0.494337] pci 0000:02:03.0: IO window: 0xa000-0xafff [ 0.494340] pci 0000:02:03.0: MEM window: 0xfd600000-0xfd6fffff [ 0.494343] pci 0000:02:03.0: PREFETCH window: 0x000000efd00000-0x000000efdfffff [ 0.494348] pci 0000:01:00.0: PCI bridge, secondary bus 0000:02 [ 0.494350] pci 0000:01:00.0: IO window: 0xa000-0xdfff [ 0.494353] pci 0000:01:00.0: MEM window: 0xfd600000-0xfd9fffff [ 0.494356] pci 0000:01:00.0: PREFETCH window: 0x000000d0000000-0x000000efffffff [ 0.494361] pci 0000:00:03.0: PCI bridge, secondary bus 0000:01 [ 0.494363] pci 0000:00:03.0: IO window: 0xa000-0xdfff [ 0.494365] pci 0000:00:03.0: MEM window: 0xfd600000-0xfd9fffff [ 0.494368] pci 0000:00:03.0: PREFETCH window: 0x000000d0000000-0x000000efffffff [ 0.494371] pci 0000:00:06.0: PCI bridge, secondary bus 0000:07 [ 0.494373] pci 0000:00:06.0: IO window: 0x8000-0x8fff [ 0.494375] pci 0000:00:06.0: MEM window: 0xfdf00000-0xfdffffff [ 0.494377] pci 0000:00:06.0: PREFETCH window: 0x000000fde00000-0x000000fdefffff [ 0.494381] pci 0000:00:07.0: PCI bridge, secondary bus 0000:08 [ 0.494382] pci 0000:00:07.0: IO window: 0xe000-0xefff [ 0.494385] pci 0000:00:07.0: MEM window: 0xfdd00000-0xfddfffff [ 0.494387] pci 0000:00:07.0: PREFETCH window: 0x000000fda00000-0x000000fdafffff [ 0.494391] pci 0000:00:10.0: PCI bridge, secondary bus 0000:09 [ 0.494393] pci 0000:00:10.0: IO window: 0x9000-0x9fff [ 0.494396] pci 0000:00:10.0: MEM window: 0xfdc00000-0xfdcfffff [ 0.494399] pci 0000:00:10.0: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff [ 0.494407] pci 0000:00:03.0: setting latency timer to 64 [ 0.494412] pci 0000:01:00.0: setting latency timer to 64 [ 0.494418] pci 0000:02:00.0: setting latency timer to 64 [ 0.494424] pci 0000:02:01.0: setting latency timer to 64 [ 0.494429] pci 0000:02:02.0: setting latency timer to 64 [ 0.494435] pci 0000:02:03.0: setting latency timer to 64 [ 0.494439] pci 0000:00:06.0: setting latency timer to 64 [ 0.494443] pci 0000:00:07.0: setting latency timer to 64 [ 0.494447] pci 0000:00:10.0: setting latency timer to 64 [ 0.494450] bus: 00 index 0 io port: [0x00-0xffff] [ 0.494451] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] [ 0.494453] bus: 01 index 0 io port: [0xa000-0xdfff] [ 0.494454] bus: 01 index 1 mmio: [0xfd600000-0xfd9fffff] [ 0.494456] bus: 01 index 2 mmio: [0xd0000000-0xefffffff] [ 0.494457] bus: 01 index 3 mmio: [0x0-0x0] [ 0.494458] bus: 02 index 0 io port: [0xa000-0xdfff] [ 0.494460] bus: 02 index 1 mmio: [0xfd600000-0xfd9fffff] [ 0.494461] bus: 02 index 2 mmio: [0xd0000000-0xefffffff] [ 0.494462] bus: 02 index 3 mmio: [0x0-0x0] [ 0.494464] bus: 03 index 0 io port: [0xd000-0xdfff] [ 0.494465] bus: 03 index 1 mmio: [0xfd900000-0xfd9fffff] [ 0.494466] bus: 03 index 2 mmio: [0xd0000000-0xdfffffff] [ 0.494468] bus: 03 index 3 mmio: [0x0-0x0] [ 0.494469] bus: 04 index 0 io port: [0xc000-0xcfff] [ 0.494470] bus: 04 index 1 mmio: [0xfd800000-0xfd8fffff] [ 0.494472] bus: 04 index 2 mmio: [0xeff00000-0xefffffff] [ 0.494473] bus: 04 index 3 mmio: [0x0-0x0] [ 0.494474] bus: 05 index 0 io port: [0xb000-0xbfff] [ 0.494476] bus: 05 index 1 mmio: [0xfd700000-0xfd7fffff] [ 0.494477] bus: 05 index 2 mmio: [0xefe00000-0xefefffff] [ 0.494478] bus: 05 index 3 mmio: [0x0-0x0] [ 0.494479] bus: 06 index 0 io port: [0xa000-0xafff] [ 0.494481] bus: 06 index 1 mmio: [0xfd600000-0xfd6fffff] [ 0.494482] bus: 06 index 2 mmio: [0xefd00000-0xefdfffff] [ 0.494483] bus: 06 index 3 mmio: [0x0-0x0] [ 0.494485] bus: 07 index 0 io port: [0x8000-0x8fff] [ 0.494486] bus: 07 index 1 mmio: [0xfdf00000-0xfdffffff] [ 0.494487] bus: 07 index 2 mmio: [0xfde00000-0xfdefffff] [ 0.494489] bus: 07 index 3 mmio: [0x0-0x0] [ 0.494490] bus: 08 index 0 io port: [0xe000-0xefff] [ 0.494491] bus: 08 index 1 mmio: [0xfdd00000-0xfddfffff] [ 0.494493] bus: 08 index 2 mmio: [0xfda00000-0xfdafffff] [ 0.494494] bus: 08 index 3 mmio: [0x0-0x0] [ 0.494495] bus: 09 index 0 io port: [0x9000-0x9fff] [ 0.494497] bus: 09 index 1 mmio: [0xfdc00000-0xfdcfffff] [ 0.494498] bus: 09 index 2 mmio: [0xfdb00000-0xfdbfffff] [ 0.494499] bus: 09 index 3 io port: [0x00-0xffff] [ 0.494501] bus: 09 index 4 mmio: [0x000000-0xffffffffffffffff] [ 0.494558] NET: Registered protocol family 2 [ 0.500919] Switched to high resolution mode on CPU 3 [ 0.501010] Switched to high resolution mode on CPU 2 [ 0.501057] Switched to high resolution mode on CPU 1 [ 0.504009] Switched to high resolution mode on CPU 0 [ 0.536137] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.537070] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.540713] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.541195] TCP: Hash tables configured (established 524288 bind 65536) [ 0.541198] TCP reno registered [ 0.556126] NET: Registered protocol family 1 [ 0.556219] checking if image is initramfs... it is [ 1.103907] Freeing initrd memory: 8402k freed [ 1.109303] audit: initializing netlink socket (disabled) [ 1.109331] type=2000 audit(1234555783.105:1): initialized [ 1.109742] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.110036] VFS: Disk quotas dquot_6.5.1 [ 1.110061] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.110256] msgmni has been set to 7933 [ 1.110438] alg: No test for stdrng (krng) [ 1.110460] io scheduler noop registered [ 1.110462] io scheduler anticipatory registered [ 1.110463] io scheduler deadline registered [ 1.110488] io scheduler cfq registered (default) [ 1.110632] pci 0000:00:03.0: Disabling HT MSI mapping<6>pci 0000:00:06.0: Disabling HT MSI mapping<6>pci 0000:00:07.0: Disabling HT MSI mapping<6>pci 0000:00:09.0: Disabling HT MSI mapping<6>pci 0000:00:0e.0: Disabling HT MSI mapping<6>pci 0000:00:0f.0: Disabling HT MSI mapping<6>pci 0000:00:10.0: Disabling HT MSI mapping<6>pci 0000:00:10.1: Disabling HT MSI mapping<7>pci 0000:03:00.0: Boot video device [ 1.131475] pcieport-driver 0000:00:03.0: setting latency timer to 64 [ 1.131500] pcieport-driver 0000:00:03.0: found MSI capability [ 1.131516] pcieport-driver 0000:00:03.0: irq 1279 for MSI/MSI-X [ 1.131523] pci_express 0000:00:03.0:pcie00: allocate port service [ 1.131577] pci_express 0000:00:03.0:pcie03: allocate port service [ 1.131661] pcieport-driver 0000:00:06.0: setting latency timer to 64 [ 1.131685] pcieport-driver 0000:00:06.0: found MSI capability [ 1.131699] pcieport-driver 0000:00:06.0: irq 1278 for MSI/MSI-X [ 1.131705] pci_express 0000:00:06.0:pcie00: allocate port service [ 1.131758] pci_express 0000:00:06.0:pcie03: allocate port service [ 1.131834] pcieport-driver 0000:00:07.0: setting latency timer to 64 [ 1.131859] pcieport-driver 0000:00:07.0: found MSI capability [ 1.131872] pcieport-driver 0000:00:07.0: irq 1277 for MSI/MSI-X [ 1.131878] pci_express 0000:00:07.0:pcie00: allocate port service [ 1.131930] pci_express 0000:00:07.0:pcie03: allocate port service [ 1.132009] pcieport-driver 0000:01:00.0: setting latency timer to 64 [ 1.132070] pcieport-driver 0000:02:00.0: setting latency timer to 64 [ 1.132126] pcieport-driver 0000:02:01.0: setting latency timer to 64 [ 1.132187] pcieport-driver 0000:02:02.0: setting latency timer to 64 [ 1.132242] pcieport-driver 0000:02:03.0: setting latency timer to 64 [ 1.136492] Linux agpgart interface v0.103 [ 1.136494] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.136626] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.137151] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.139201] brd: module loaded [ 1.139275] input: Macintosh mouse button emulation as /class/input/input0 [ 1.139590] PNP: No PS/2 controller found. Probing ports directly. [ 1.139975] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.139980] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.156150] mice: PS/2 mouse device common for all mice [ 1.156229] cpuidle: using governor ladder [ 1.156235] cpuidle: using governor menu [ 1.156324] TCP cubic registered [ 1.156326] NET: Registered protocol family 17 [ 1.156550] registered taskstats version 1 [ 1.156698] Freeing unused kernel memory: 524k freed [ 1.218590] fan PNP0C0B:00: registered as cooling_device0 [ 1.218594] ACPI: Fan [FAN] (on) [ 1.222844] ACPI: SSDT CFEF9D80, 01D6 (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 1.223144] processor ACPI_CPU:00: registered as cooling_device1 [ 1.223439] ACPI: SSDT CFEFA1F0, 012F (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 1.223720] processor ACPI_CPU:01: registered as cooling_device2 [ 1.224019] ACPI: SSDT CFEFA320, 012F (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 1.224297] processor ACPI_CPU:02: registered as cooling_device3 [ 1.224597] ACPI: SSDT CFEFA450, 012F (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 1.224878] processor ACPI_CPU:03: registered as cooling_device4 [ 1.226496] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.226841] ACPI: Thermal Zone [THRM] (40 C) [ 1.432181] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.432612] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 1.432619] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23 [ 1.432643] ohci_hcd 0000:00:0b.0: setting latency timer to 64 [ 1.432645] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 1.432729] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1 [ 1.432753] ohci_hcd 0000:00:0b.0: irq 23, io mem 0xfe02f000 [ 1.433973] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.433974] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 1.443882] Uniform Multi-Platform E-IDE driver [ 1.452807] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 1.452814] firewire_ohci 0000:09:08.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 1.490577] usb usb1: configuration #1 chosen from 1 choice [ 1.490600] hub 1-0:1.0: USB hub found [ 1.490608] hub 1-0:1.0: 8 ports detected [ 1.490687] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.490689] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.490691] usb usb1: Product: OHCI Host Controller [ 1.490692] usb usb1: Manufacturer: Linux 2.6.28.drazzib ohci_hcd [ 1.490693] usb usb1: SerialNumber: 0000:00:0b.0 [ 1.491254] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 1.491260] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22 [ 1.491286] ehci_hcd 0000:00:0b.1: setting latency timer to 64 [ 1.491288] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 1.491329] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2 [ 1.491351] ehci_hcd 0000:00:0b.1: debug port 1 [ 1.491355] ehci_hcd 0000:00:0b.1: cache line size of 32 is not supported [ 1.491370] ehci_hcd 0000:00:0b.1: irq 22, io mem 0xfe02e000 [ 1.504518] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00 [ 1.504580] usb usb2: configuration #1 chosen from 1 choice [ 1.504602] hub 2-0:1.0: USB hub found [ 1.504608] hub 2-0:1.0: 8 ports detected [ 1.504688] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.504690] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.504692] usb usb2: Product: EHCI Host Controller [ 1.504693] usb usb2: Manufacturer: Linux 2.6.28.drazzib ehci_hcd [ 1.504694] usb usb2: SerialNumber: 0000:00:0b.1 [ 1.504791] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 1.505122] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21 [ 1.505127] forcedeth 0000:00:14.0: PCI INT A -> Link[APCH] -> GSI 21 (level, low) -> IRQ 21 [ 1.505131] forcedeth 0000:00:14.0: setting latency timer to 64 [ 1.505161] nv_probe: set workaround bit for reversed mac addr [ 1.540511] firewire_ohci: Added fw-ohci device 0000:09:08.0, OHCI version 1.10 [ 2.024282] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x1374 @ 1, addr 00:1e:8c:ce:93:dd [ 2.024285] forcedeth 0000:00:14.0: highdma pwrctl timirq gbit lnktim desc-v3 [ 2.025394] amd74xx 0000:00:0d.0: UDMA133 controller [ 2.025397] amd74xx 0000:00:0d.0: IDE controller (0x10de:0x0265 rev 0xa1) [ 2.025424] amd74xx 0000:00:0d.0: not 100% native mode: will probe irqs later [ 2.025428] ide0: BM-DMA at 0xfd00-0xfd07 [ 2.025435] ide1: BM-DMA at 0xfd08-0xfd0f [ 2.025438] Probing IDE interface ide0... [ 2.040061] firewire_core: created device fw0: GUID 001e8c00010ab448, S400 [ 2.042033] SCSI subsystem initialized [ 2.050789] libata version 3.00 loaded. [ 2.061013] usb 1-3: new low speed USB device using ohci_hcd and address 2 [ 2.275510] usb 1-3: configuration #1 chosen from 1 choice [ 2.278581] usb 1-3: New USB device found, idVendor=045e, idProduct=00f9 [ 2.278582] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.278584] usb 1-3: Product: Microsoft Wireless Desktop Receiver 3.1 [ 2.278585] usb 1-3: Manufacturer: Microsft [ 2.291977] usbcore: registered new interface driver hiddev [ 2.292052] usbcore: registered new interface driver usbhid [ 2.292054] usbhid: v2.6:USB HID core driver [ 2.313611] hda: ST3200822A, ATA DISK drive [ 2.984040] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 2.984257] hda: UDMA/100 mode selected [ 2.984559] Probing IDE interface ide1... [ 3.548041] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 3.552325] ide1 at 0x170-0x177,0x376 on irq 15 [ 3.552384] sata_nv 0000:00:0e.0: version 3.5 [ 3.552697] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20 [ 3.552701] sata_nv 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20 [ 3.552703] sata_nv 0000:00:0e.0: Using SWNCQ mode [ 3.552764] sata_nv 0000:00:0e.0: setting latency timer to 64 [ 3.554217] scsi0 : sata_nv [ 3.554422] scsi1 : sata_nv [ 3.554552] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xf800 irq 20 [ 3.554555] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xf808 irq 20 [ 4.020031] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.028844] ata1.00: ATA-7: WDC WD1500ADFD-00NLR5, 21.07QR5, max UDMA/133 [ 4.028846] ata1.00: 293046768 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 4.044849] ata1.00: configured for UDMA/133 [ 4.512030] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.520152] ata2.00: ATAPI: PIONEER DVD-RW DVR-215, 1.13, max UDMA/66 [ 4.536171] ata2.00: configured for UDMA/66 [ 4.536443] scsi 0:0:0:0: Direct-Access ATA WDC WD1500ADFD-0 21.0 PQ: 0 ANSI: 5 [ 4.547783] scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-215 1.13 PQ: 0 ANSI: 5 [ 4.548141] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23 [ 4.548144] sata_nv 0000:00:0f.0: PCI INT A -> Link[APSJ] -> GSI 23 (level, low) -> IRQ 23 [ 4.548146] sata_nv 0000:00:0f.0: Using SWNCQ mode [ 4.548191] sata_nv 0000:00:0f.0: setting latency timer to 64 [ 4.548297] scsi2 : sata_nv [ 4.548363] scsi3 : sata_nv [ 4.548496] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xf300 irq 23 [ 4.548499] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xf308 irq 23 [ 5.181660] ide-gd driver 1.18 [ 5.181680] hda: max request size: 512KiB [ 5.182058] hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63 [ 5.182200] hda: cache flushes supported [ 5.182232] hda:<4>Driver 'sd' needs updating - please use bus_type methods [ 5.185792] sd 0:0:0:0: [sda] 293046768 512-byte hardware sectors: (150 GB/139 GiB) [ 5.185805] sd 0:0:0:0: [sda] Write Protect is off [ 5.185806] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.185825] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.185879] sd 0:0:0:0: [sda] 293046768 512-byte hardware sectors: (150 GB/139 GiB) [ 5.185889] sd 0:0:0:0: [sda] Write Protect is off [ 5.185891] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.185907] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.185911] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 5.190257] hda1 hda2 [ 5.193903] sda1 sda2 < sda5 > [ 5.198097] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.233848] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.233852] Uniform CD-ROM driver Revision: 3.20 [ 5.233938] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 5.240280] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.240301] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 5.418048] device-mapper: uevent: version 1.0.3 [ 5.418147] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 5.530640] PM: Starting manual resume from disk [ 5.564705] kjournald starting. Commit interval 5 seconds [ 5.564714] EXT3-fs: mounted filesystem with ordered data mode. [ 6.613371] udevd version 125 started [ 7.029136] input: Power Button (FF) as /class/input/input1 [ 7.064057] ACPI: Power Button (FF) [PWRF] [ 7.064102] input: Power Button (CM) as /class/input/input2 [ 7.100049] ACPI: Power Button (CM) [PWRB] [ 7.120951] parport_pc 00:09: reported by Plug and Play ACPI [ 7.120976] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 7.259326] ACPI: I/O resource nForce2_smbus [0x1c00-0x1c3f] conflicts with ACPI region SM00 [0x1c00-0x1c05] [ 7.259328] ACPI: Device needs an ACPI driver [ 7.259348] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 [ 7.259351] ACPI: I/O resource nForce2_smbus [0x1c80-0x1cbf] conflicts with ACPI region SM01 [0x1c80-0x1c85] [ 7.259352] ACPI: Device needs an ACPI driver [ 7.259365] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c80 [ 7.266535] input: PC Speaker as /class/input/input3 [ 7.298236] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /class/input/input4 [ 7.354017] microsoft 0003:045E:00F9.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:0b.0-3/input0 [ 7.371033] microsoft 0003:045E:00F9.0002: fixing up Microsoft Wireless Receiver Model 1028 report descriptor [ 7.385098] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /class/input/input5 [ 7.432056] microsoft 0003:045E:00F9.0002: input,hidraw1: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:0b.0-3/input1 [ 7.545564] rtc_cmos 00:05: RTC can wake from S4 [ 7.545609] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 7.545639] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 7.634479] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22 [ 7.634484] HDA Intel 0000:00:10.1: PCI INT B -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22 [ 7.634650] HDA Intel 0000:00:10.1: setting latency timer to 64 [ 8.024006] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 8.472434] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16 [ 8.472440] HDA Intel 0000:03:00.1: PCI INT B -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16 [ 8.472491] HDA Intel 0000:03:00.1: setting latency timer to 64 [ 10.772437] EXT3 FS on dm-1, internal journal [ 10.849256] loop: module loaded [ 11.340645] kjournald starting. Commit interval 5 seconds [ 11.341197] EXT3 FS on sda1, internal journal [ 11.341201] EXT3-fs: mounted filesystem with ordered data mode. [ 11.350453] EXT4-fs: barriers enabled [ 11.356928] kjournald2 starting. Commit interval 5 seconds [ 11.357752] EXT4 FS on dm-5, internal journal on dm-5:8 [ 11.357754] EXT4-fs: delayed allocation enabled [ 11.357755] EXT4-fs: file extents enabled [ 11.357963] EXT4-fs: mballoc enabled [ 11.357966] EXT4-fs: mounted filesystem with ordered data mode. [ 11.399209] Adding 4095992k swap on /dev/mapper/gauloise-swap_1. Priority:-1 extents:1 across:4095992k [ 11.604896] fuse init (API version 7.10) [ 16.210007] NET: Registered protocol family 10 [ 16.210165] lo: Disabled Privacy Extensions [ 16.430587] CIFS: Unknown mount option _netdev [ 22.110954] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 22.110957] vboxdrv: Successfully done. [ 22.110958] vboxdrv: Found 4 processor cores. [ 22.110995] VBoxDrv: dbg - g_abExecMemory=ffffffffa03cc9e0 [ 22.111080] vboxdrv: fAsync=0 offMin=0x186 offMax=0x5774 [ 22.111111] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 22.111113] vboxdrv: Successfully loaded version 2.1.2 (interface 0x000a0009). [ 22.350398] VBoxNetFlt: dbg - g_abExecMemory=ffffffffa05679e0 [ 22.440046] CIFS VFS: Error connecting to socket. Aborting operation [ 22.440098] CIFS VFS: cifs_mount failed w/return code = -113 [ 22.441057] CIFS: Unknown mount option _netdev [ 23.815071] lp0: using parport0 (interrupt-driven). [ 23.845183] ppdev: user-space parallel port driver [ 25.161822] [drm] Initialized drm 1.1.0 20060810 [ 25.212725] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16 [ 25.212729] radeon 0000:03:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16 [ 25.212733] radeon 0000:03:00.0: setting latency timer to 64 [ 25.212843] [drm] Initialized radeon 1.29.0 20080613 on minor 0 [ 25.390151] [drm] Setting GART location based on new memory map [ 25.394702] [drm] Loading RV630 CP Microcode [ 25.394992] [drm] Loading RV630 PFP Microcode [ 25.409932] [drm] Resetting GPU [ 25.409988] [drm] writeback test succeeded in 1 usecs [ 28.449546] CIFS VFS: Error connecting to socket. Aborting operation [ 28.449551] CIFS VFS: cifs_mount failed w/return code = -113 [ 28.451778] CIFS: Unknown mount option _netdev [ 31.831431] JBD: barrier-based sync failed on dm-5:8 - disabling barriers [ 34.456043] CIFS VFS: Error connecting to socket. Aborting operation [ 34.456048] CIFS VFS: cifs_mount failed w/return code = -113 [ 34.456943] CIFS: Unknown mount option _netdev [ 40.481161] CIFS VFS: Error connecting to socket. Aborting operation [ 40.481170] CIFS VFS: cifs_mount failed w/return code = -113