Linux version 2.6.31-rc9-27054-g6cf8a3f (root@honk) (gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #6 SMP PREEMPT Fri Sep 11 08:59:00 CEST 2009 Command line: root=/dev/md12 quiet fastboot ro KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 0000000000097c00 (usable) BIOS-e820: 0000000000097c00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bffb0000 (usable) BIOS-e820: 00000000bffb0000 - 00000000bffbe000 (ACPI data) BIOS-e820: 00000000bffbe000 - 00000000bffe0000 (ACPI NVS) BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000240000000 (usable) DMI present. AMI BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0x240000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000000 mask FFFF80000000 write-back 1 base 000080000000 mask FFFFC0000000 write-back 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled TOM2: 0000000240000000 aka 9216M e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xbffb0 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 Using GB pages for direct mapping init_memory_mapping: 0000000000000000-00000000bffb0000 0000000000 - 0080000000 page 1G 0080000000 - 00bfe00000 page 2M 00bfe00000 - 00bffb0000 page 4k kernel direct mapping tables up to bffb0000 @ 10000-13000 init_memory_mapping: 0000000100000000-0000000240000000 0100000000 - 0240000000 page 1G kernel direct mapping tables up to 240000000 @ 12000-13000 ACPI: RSDP 00000000000fac40 00024 (v02 ACPIAM) ACPI: XSDT 00000000bffb0100 00054 (v01 032008 OEMXSDT 20080320 MSFT 00000097) ACPI: FACP 00000000bffb0290 000F4 (v03 032008 OEMFACP 20080320 MSFT 00000097) ACPI: DSDT 00000000bffb0440 09470 (v01 P0001 P0001000 00000000 INTL 20051117) ACPI: FACS 00000000bffbe000 00040 ACPI: APIC 00000000bffb0390 0006C (v01 032008 OEMAPIC 20080320 MSFT 00000097) ACPI: MCFG 00000000bffb0400 0003C (v01 032008 OEMMCFG 20080320 MSFT 00000097) ACPI: OEMB 00000000bffbe040 00071 (v01 032008 AMI_OEM 20080320 MSFT 00000097) ACPI: HPET 00000000bffb98b0 00038 (v01 032008 OEMHPET 20080320 MSFT 00000097) ACPI: SSDT 00000000bffb98f0 00544 (v01 A M I POWERNOW 00000001 AMD 00000001) ACPI: Local APIC address 0xfee00000 (6 early reservations) ==> bootmem [0000000000 - 0240000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 0001a061d4] TEXT DATA BSS ==> [0001000000 - 0001a061d4] #3 [0000097c00 - 0000100000] BIOS reserved ==> [0000097c00 - 0000100000] #4 [0001a07000 - 0001a0719d] BRK ==> [0001a07000 - 0001a0719d] #5 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] found SMP MP-table at [ffff8800000ff780] ff780 [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880028600000-ffff88002f5fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00240000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x00000097 0: 0x00000100 -> 0x000bffb0 0: 0x00100000 -> 0x00240000 On node 0 totalpages: 2096951 DMA zone: 56 pages used for memmap DMA zone: 109 pages reserved DMA zone: 3810 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 767976 pages, LIFO batch:31 Normal zone: 17920 pages used for memmap Normal zone: 1292800 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8300 base: 0xfed00000 SMP: Allowing 4 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 0000000000097000 - 0000000000098000 PM: Registered nosave memory: 0000000000098000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 PM: Registered nosave memory: 00000000bffb0000 - 00000000bffbe000 PM: Registered nosave memory: 00000000bffbe000 - 00000000bffe0000 PM: Registered nosave memory: 00000000bffe0000 - 00000000c0000000 PM: Registered nosave memory: 00000000c0000000 - 00000000fff00000 PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 Allocating PCI resources starting at c0000000 (gap: c0000000:3ff00000) NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 26 pages at ffff880028034000, static data 77472 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2064586 Kernel command line: root=/dev/md12 quiet fastboot ro PID hash table entries: 4096 (order: 12, 32768 bytes) Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found Node 0: aperture @ 20000000 size 32 MB Aperture pointing to e820 RAM. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 20000000 PM: Registered nosave memory: 0000000020000000 - 0000000024000000 Memory: 8183416k/9437184k available (6358k kernel code, 1049380k absent, 203484k reserved, 2035k data, 492k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. NR_IRQS:384 Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 2507.635 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered HPET: 4 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 5015.26 BogoMIPS (lpj=2507632) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks using C1E aware idle routine Performance Counters: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic counters: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose counters: 0 ... counter mask: 000000000000000f ACPI: Core revision 20090521 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5015.02 BogoMIPS (lpj=2507513) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 mce: CPU supports 6 MCE banks CPU1: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Booting processor 2 APIC 0x2 ip 0x6000 Initializing CPU#2 Calibrating delay using timer specific routine.. 5015.02 BogoMIPS (lpj=2507514) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 mce: CPU supports 6 MCE banks CPU2: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03 checking TSC synchronization [CPU#0 -> CPU#2]: passed. Booting processor 3 APIC 0x3 ip 0x6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 5015.02 BogoMIPS (lpj=2507514) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 mce: CPU supports 6 MCE banks CPU3: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03 checking TSC synchronization [CPU#0 -> CPU#3]: passed. Brought up 4 CPUs Total of 4 processors activated (20060.34 BogoMIPS). xor: automatically using best checksumming function: generic_sse generic_sse: 10200.000 MB/sec xor: using function: generic_sse (10200.000 MB/sec) NET: Registered protocol family 16 node 0 link 0: io port [1000, ffffff] TOM: 00000000c0000000 aka 3072M Fam 10h mmconf [e0000000, e00fffff] node 0 link 0: mmio [e0000000, efffffff] ==> [e0100000, efffffff] node 0 link 0: mmio [f0000000, ffffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [c0000000, dfffffff] TOM2: 0000000240000000 aka 9216M bus: [00,07] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [e0100000, ffffffff] bus: 00 index 2 mmio: [a0000, bffff] bus: 00 index 3 mmio: [c0000000, dfffffff] bus: 00 index 4 mmio: [240000000, fcffffffff] ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access PCI: Using configuration type 1 for extended access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG at e0000000 - efffffff ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:07.0: PME# supported from D0 D3hot D3cold pci 0000:00:07.0: PME# disabled pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold pci 0000:00:0b.0: PME# disabled pci 0000:00:0c.0: PME# supported from D0 D3hot D3cold pci 0000:00:0c.0: PME# disabled pci 0000:00:12.0: reg 10 io port: [0x5000-0x5007] pci 0000:00:12.0: reg 14 io port: [0x4000-0x4003] pci 0000:00:12.0: reg 18 io port: [0x3000-0x3007] pci 0000:00:12.0: reg 1c io port: [0x2000-0x2003] pci 0000:00:12.0: reg 20 io port: [0x1000-0x100f] pci 0000:00:12.0: reg 24 32bit mmio: [0xfe2ff800-0xfe2ffbff] pci 0000:00:13.0: reg 10 32bit mmio: [0xfe2fe000-0xfe2fefff] pci 0000:00:13.1: reg 10 32bit mmio: [0xfe2fd000-0xfe2fdfff] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe2fc000-0xfe2fcfff] pci 0000:00:13.3: reg 10 32bit mmio: [0xfe2fb000-0xfe2fbfff] pci 0000:00:13.4: reg 10 32bit mmio: [0xfe2fa000-0xfe2fafff] pci 0000:00:13.5: reg 10 32bit mmio: [0xfe2ff000-0xfe2ff0ff] pci 0000:00:13.5: supports D1 D2 pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.5: PME# disabled pci 0000:00:14.0: reg 10 io port: [0xb00-0xb0f] pci 0000:00:14.1: reg 10 io port: [0x00-0x07] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f] pci 0000:01:00.0: reg 10 64bit mmio: [0xc0000000-0xcfffffff] pci 0000:01:00.0: reg 18 64bit mmio: [0xfe3f0000-0xfe3fffff] pci 0000:01:00.0: reg 20 io port: [0x6000-0x60ff] pci 0000:01:00.0: reg 30 32bit mmio: [0xfe3c0000-0xfe3dffff] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: reg 10 64bit mmio: [0xfe3ec000-0xfe3effff] pci 0000:01:00.1: supports D1 D2 pci 0000:00:02.0: bridge io port: [0x6000-0x6fff] pci 0000:00:02.0: bridge 32bit mmio: [0xfe300000-0xfe3fffff] pci 0000:00:02.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff] pci 0000:02:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff] pci 0000:02:00.0: reg 18 64bit mmio: [0xfe4f0000-0xfe4fffff] pci 0000:02:00.0: reg 20 io port: [0x7000-0x70ff] pci 0000:02:00.0: reg 30 32bit mmio: [0xfe4c0000-0xfe4dffff] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.1: reg 10 64bit mmio: [0xfe4ec000-0xfe4effff] pci 0000:02:00.1: supports D1 D2 pci 0000:00:03.0: bridge io port: [0x7000-0x7fff] pci 0000:00:03.0: bridge 32bit mmio: [0xfe400000-0xfe4fffff] pci 0000:00:03.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:03:00.0: reg 10 io port: [0x9800-0x9807] pci 0000:03:00.0: reg 14 io port: [0x9400-0x9403] pci 0000:03:00.0: reg 18 io port: [0x9000-0x9007] pci 0000:03:00.0: reg 1c io port: [0x8800-0x8803] pci 0000:03:00.0: reg 20 io port: [0x8400-0x840f] pci 0000:03:00.0: reg 24 32bit mmio: [0xfe5ffc00-0xfe5fffff] pci 0000:03:00.0: supports D1 pci 0000:03:00.0: PME# supported from D0 D1 D3hot pci 0000:03:00.0: PME# disabled pci 0000:00:04.0: bridge io port: [0x8000-0x9fff] pci 0000:00:04.0: bridge 32bit mmio: [0xfe500000-0xfe5fffff] pci 0000:04:00.0: reg 10 64bit mmio: [0xfe6fc000-0xfe6fffff] pci 0000:04:00.0: reg 18 io port: [0xa800-0xa8ff] pci 0000:04:00.0: reg 30 32bit mmio: [0xfe6c0000-0xfe6dffff] pci 0000:04:00.0: supports D1 D2 pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:00:06.0: bridge io port: [0xa000-0xafff] pci 0000:00:06.0: bridge 32bit mmio: [0xfe600000-0xfe6fffff] pci 0000:05:00.0: reg 10 io port: [0xc800-0xc807] pci 0000:05:00.0: reg 14 io port: [0xc400-0xc403] pci 0000:05:00.0: reg 18 io port: [0xc000-0xc007] pci 0000:05:00.0: reg 1c io port: [0xb800-0xb803] pci 0000:05:00.0: reg 20 io port: [0xb400-0xb40f] pci 0000:05:00.0: reg 24 32bit mmio: [0xfe7ffc00-0xfe7fffff] pci 0000:05:00.0: supports D1 pci 0000:05:00.0: PME# supported from D0 D1 D3hot pci 0000:05:00.0: PME# disabled pci 0000:00:07.0: bridge io port: [0xb000-0xcfff] pci 0000:00:07.0: bridge 32bit mmio: [0xfe700000-0xfe7fffff] pci 0000:00:0b.0: bridge io port: [0xd000-0xdfff] pci 0000:07:04.0: reg 10 io port: [0xd800-0xd8ff] pci 0000:07:04.0: supports D1 D2 pci 0000:06:00.0: bridge io port: [0xd000-0xdfff] pci 0000:08:00.0: reg 10 64bit mmio: [0xfea00000-0xfeafffff] pci 0000:08:00.0: reg 18 io port: [0xe800-0xe8ff] pci 0000:08:00.0: reg 1c 64bit mmio: [0xfe900000-0xfe9fffff] pci 0000:08:00.0: reg 30 32bit mmio: [0xfe880000-0xfe8fffff] pci 0000:00:0c.0: bridge io port: [0xe000-0xefff] pci 0000:00:0c.0: bridge 32bit mmio: [0xfe800000-0xfeafffff] pci 0000:09:08.0: reg 10 32bit mmio: [0xfebff000-0xfebfffff] pci 0000:09:08.0: supports D1 D2 pci 0000:09:08.0: PME# supported from D0 D1 D2 D3hot pci 0000:09:08.0: PME# disabled pci 0000:00:14.4: transparent bridge pci 0000:00:14.4: bridge 32bit mmio: [0xfeb00000-0xfebfffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEC._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb raid6: int64x1 2156 MB/s raid6: int64x2 3074 MB/s raid6: int64x4 2312 MB/s raid6: int64x8 2160 MB/s raid6: sse2x1 3562 MB/s raid6: sse2x2 5722 MB/s raid6: sse2x4 7109 MB/s raid6: using algorithm sse2x4 (7109 MB/s) PCI: Using ACPI for IRQ routing pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff] pci 0000:00:00.0: BAR 3: can't allocate resource PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 20000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 32-bit 14.318180 MHz counter pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:0a: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling pnp 00:0a: mem resource (0xc0000-0xcffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling pnp 00:0a: mem resource (0xe0000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling pnp 00:0a: mem resource (0x100000-0xbfffffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered system 00:06: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:06: iomem range 0xfee00000-0xfee00fff has been reserved system 00:07: ioport range 0x4d0-0x4d1 has been reserved system 00:07: ioport range 0x40b-0x40b has been reserved system 00:07: ioport range 0x4d6-0x4d6 has been reserved system 00:07: ioport range 0xc00-0xc01 has been reserved system 00:07: ioport range 0xc14-0xc14 has been reserved system 00:07: ioport range 0xc50-0xc51 has been reserved system 00:07: ioport range 0xc52-0xc52 has been reserved system 00:07: ioport range 0xc6c-0xc6c has been reserved system 00:07: ioport range 0xc6f-0xc6f has been reserved system 00:07: ioport range 0xcd0-0xcd1 has been reserved system 00:07: ioport range 0xcd2-0xcd3 has been reserved system 00:07: ioport range 0xcd4-0xcd5 has been reserved system 00:07: ioport range 0xcd6-0xcd7 has been reserved system 00:07: ioport range 0xcd8-0xcdf has been reserved system 00:07: ioport range 0x800-0x89f has been reserved system 00:07: ioport range 0xb10-0xb1f has been reserved system 00:07: ioport range 0x900-0x90f has been reserved system 00:07: ioport range 0x910-0x91f has been reserved system 00:07: ioport range 0xfe00-0xfefe has been reserved system 00:07: iomem range 0xffb80000-0xffbfffff has been reserved system 00:07: iomem range 0xfff00000-0xffffffff has been reserved system 00:08: ioport range 0xe00-0xe0f has been reserved system 00:08: ioport range 0xe80-0xe8f has been reserved system 00:08: ioport range 0xf40-0xf4f has been reserved system 00:08: ioport range 0xa30-0xa3f has been reserved system 00:09: iomem range 0xe0000000-0xefffffff has been reserved system 00:0a: iomem range 0xfec00000-0xffffffff could not be reserved pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 pci 0000:00:02.0: IO window: 0x6000-0x6fff pci 0000:00:02.0: MEM window: 0xfe300000-0xfe3fffff pci 0000:00:02.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff pci 0000:00:03.0: PCI bridge, secondary bus 0000:02 pci 0000:00:03.0: IO window: 0x7000-0x7fff pci 0000:00:03.0: MEM window: 0xfe400000-0xfe4fffff pci 0000:00:03.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff pci 0000:00:04.0: PCI bridge, secondary bus 0000:03 pci 0000:00:04.0: IO window: 0x8000-0x9fff pci 0000:00:04.0: MEM window: 0xfe500000-0xfe5fffff pci 0000:00:04.0: PREFETCH window: disabled pci 0000:00:06.0: PCI bridge, secondary bus 0000:04 pci 0000:00:06.0: IO window: 0xa000-0xafff pci 0000:00:06.0: MEM window: 0xfe600000-0xfe6fffff pci 0000:00:06.0: PREFETCH window: disabled pci 0000:00:07.0: PCI bridge, secondary bus 0000:05 pci 0000:00:07.0: IO window: 0xb000-0xcfff pci 0000:00:07.0: MEM window: 0xfe700000-0xfe7fffff pci 0000:00:07.0: PREFETCH window: disabled pci 0000:06:00.0: PCI bridge, secondary bus 0000:07 pci 0000:06:00.0: IO window: 0xd000-0xdfff pci 0000:06:00.0: MEM window: disabled pci 0000:06:00.0: PREFETCH window: disabled pci 0000:00:0b.0: PCI bridge, secondary bus 0000:06 pci 0000:00:0b.0: IO window: 0xd000-0xdfff pci 0000:00:0b.0: MEM window: disabled pci 0000:00:0b.0: PREFETCH window: disabled pci 0000:00:0c.0: PCI bridge, secondary bus 0000:08 pci 0000:00:0c.0: IO window: 0xe000-0xefff pci 0000:00:0c.0: MEM window: 0xfe800000-0xfeafffff pci 0000:00:0c.0: PREFETCH window: disabled pci 0000:00:14.4: PCI bridge, secondary bus 0000:09 pci 0000:00:14.4: IO window: disabled pci 0000:00:14.4: MEM window: 0xfeb00000-0xfebfffff pci 0000:00:14.4: PREFETCH window: disabled pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:03.0: setting latency timer to 64 pci 0000:00:04.0: setting latency timer to 64 pci 0000:00:06.0: setting latency timer to 64 pci 0000:00:07.0: setting latency timer to 64 pci 0000:00:0b.0: setting latency timer to 64 pci 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 pci 0000:06:00.0: setting latency timer to 64 pci 0000:00:0c.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0x6000-0x6fff] pci_bus 0000:01: resource 1 mem: [0xfe300000-0xfe3fffff] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff] pci_bus 0000:02: resource 0 io: [0x7000-0x7fff] pci_bus 0000:02: resource 1 mem: [0xfe400000-0xfe4fffff] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff] pci_bus 0000:03: resource 0 io: [0x8000-0x9fff] pci_bus 0000:03: resource 1 mem: [0xfe500000-0xfe5fffff] pci_bus 0000:04: resource 0 io: [0xa000-0xafff] pci_bus 0000:04: resource 1 mem: [0xfe600000-0xfe6fffff] pci_bus 0000:05: resource 0 io: [0xb000-0xcfff] pci_bus 0000:05: resource 1 mem: [0xfe700000-0xfe7fffff] pci_bus 0000:06: resource 0 io: [0xd000-0xdfff] pci_bus 0000:07: resource 0 io: [0xd000-0xdfff] pci_bus 0000:08: resource 0 io: [0xe000-0xefff] pci_bus 0000:08: resource 1 mem: [0xfe800000-0xfeafffff] pci_bus 0000:09: resource 1 mem: [0xfeb00000-0xfebfffff] pci_bus 0000:09: resource 3 io: [0x00-0xffff] pci_bus 0000:09: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). fuse init (API version 7.12) SGI XFS with security attributes, large block/inode numbers, no debug enabled Btrfs loaded msgmni has been set to 15985 alg: No test for stdrng (krng) async_tx: api initialized (sync-only) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device pcieport-driver 0000:00:02.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:02.0: setting latency timer to 64 pcieport-driver 0000:00:03.0: irq 25 for MSI/MSI-X pcieport-driver 0000:00:03.0: setting latency timer to 64 pcieport-driver 0000:00:04.0: irq 26 for MSI/MSI-X pcieport-driver 0000:00:04.0: setting latency timer to 64 pcieport-driver 0000:00:06.0: irq 27 for MSI/MSI-X pcieport-driver 0000:00:06.0: setting latency timer to 64 pcieport-driver 0000:00:07.0: irq 28 for MSI/MSI-X pcieport-driver 0000:00:07.0: setting latency timer to 64 pcieport-driver 0000:00:0b.0: irq 29 for MSI/MSI-X pcieport-driver 0000:00:0b.0: setting latency timer to 64 pcieport-driver 0000:00:0c.0: irq 30 for MSI/MSI-X pcieport-driver 0000:00:0c.0: setting latency timer to 64 input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] ACPI: duty_cycle spans bit 4 processor LNXCPU:00: registered as cooling_device0 processor LNXCPU:01: registered as cooling_device1 processor LNXCPU:02: registered as cooling_device2 processor LNXCPU:03: registered as cooling_device3 Switched to high resolution mode on CPU 2 Switched to high resolution mode on CPU 3 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 lp: driver loaded but no devices found Real Time Clock Driver v1.12b Linux agpgart interface v0.103 Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled brd: module loaded loop: module loaded Uniform Multi-Platform E-IDE driver atiixp 0000:00:14.1: IDE controller (0x1002:0x438c rev 0x00) pci 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 atiixp 0000:00:14.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xff00-0xff07 Probing IDE interface ide0... ide0: no devices on the port ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-gd driver 1.18 ide-cd driver 5.00 ahci 0000:00:12.0: version 3.0 ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:12.0: flags: 64bit ncq sntf ilck led clo pmp pio scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 irq_stat 0x00400000 iPHY RDY changed ata2: SATA max UDMA/133 abar m1024@0xfe2ff800 port 0xfe2ff980 irq 22 ata3: SATA max UDMA/133 abar m1024@0xfe2ff800 port 0xfe2ffa00 irq 22 ata4: SATA max UDMA/133 abar m1024@0xfe2ff800 port 0xfe2ffa80 irq 22 ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ahci 0000:03:00.0: controller can't do NCQ, turning off CAP_NCQ ahci 0000:03:00.0: controller can't do PMP, turning off CAP_PMP ahci 0000:03:00.0: MV_AHCI HACK: port_map 7 -> 3 ahci 0000:03:00.0: Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this. ahci: SSS flag set, parallel bus scan disabled ahci 0000:03:00.0: AHCI 0001.0000 32 slots 3 ports 3 Gbps 0x3 impl RAID mode ahci 0000:03:00.0: flags: 64bit stag led slum part ahci 0000:03:00.0: setting latency timer to 64 scsi4 : ahci scsi5 : ahci scsi6 : ahci ata5: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffd00 irq 16 ata6: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffd80 irq 16 ata7: DUMMY ahci 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ahci 0000:05:00.0: controller can't do NCQ, turning off CAP_NCQ ahci 0000:05:00.0: controller can't do PMP, turning off CAP_PMP ahci 0000:05:00.0: MV_AHCI HACK: port_map 7 -> 3 ahci 0000:05:00.0: Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this. ahci: SSS flag set, parallel bus scan disabled ahci 0000:05:00.0: AHCI 0001.0000 32 slots 3 ports 3 Gbps 0x3 impl RAID mode ahci 0000:05:00.0: flags: 64bit stag led slum part ahci 0000:05:00.0: setting latency timer to 64 scsi7 : ahci scsi8 : ahci scsi9 : ahci ata8: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd00 irq 19 ata9: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd80 irq 19 ata10: DUMMY PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered firewire_ohci 0000:09:08.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 firewire_ohci: Added fw-ohci device 0000:09:08.0, OHCI version 1.0 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.5: EHCI Host Controller ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:13.5: debug port 1 ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe2ff000 ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.31-rc9-27054-g6cf8a3f ehci_hcd usb usb1: SerialNumber: 0000:00:13.5 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe2fe000 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.31-rc9-27054-g6cf8a3f ohci_hcd usb usb2: SerialNumber: 0000:00:13.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe2fd000 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.31-rc9-27054-g6cf8a3f ohci_hcd usb usb3: SerialNumber: 0000:00:13.1 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.2: OHCI Host Controller ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe2fc000 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: OHCI Host Controller usb usb4: Manufacturer: Linux 2.6.31-rc9-27054-g6cf8a3f ohci_hcd usb usb4: SerialNumber: 0000:00:13.2 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.3: OHCI Host Controller ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe2fb000 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: OHCI Host Controller usb usb5: Manufacturer: Linux 2.6.31-rc9-27054-g6cf8a3f ohci_hcd usb usb5: SerialNumber: 0000:00:13.3 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.4: OHCI Host Controller ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe2fa000 ata8: SATA link down (SStatus 0 SControl 300) ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7 ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32) ata5.00: configured for UDMA/133 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: OHCI Host Controller usb usb6: Manufacturer: Linux 2.6.31-rc9-27054-g6cf8a3f ohci_hcd usb usb6: SerialNumber: 0000:00:13.4 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice i2c /dev entries driver it87: Found IT8716F chip at 0xe80, revision 3 it87: in3 is VCC (+5V) ACPI: I/O resource it87 [0xe85-0xe86] conflicts with ACPI region HWRE [0xe85-0xe86] ACPI: Device needs an ACPI driver md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.20. AV200 0000:07:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 usb 1-3: new high speed USB device using ehci_hcd and address 2 ata4: softreset failed (device not ready) ata2: softreset failed (device not ready) ata2: applying SB600 PMP SRST workaround and retrying ata3: softreset failed (device not ready) ata3: applying SB600 PMP SRST workaround and retrying ata4: applying SB600 PMP SRST workaround and retrying usb 1-3: New USB device found, idVendor=05e3, idProduct=0608 usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 1-3: Product: USB2.0 Hub usb 1-3: configuration #1 chosen from 1 choice hub 1-3:1.0: USB hub found hub 1-3:1.0: 4 ports detected firewire_core: created device fw0: GUID 001e8c0001058edd, S400 firewire_core: phy config: card 0, new root=ffc1, gap_count=5 ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133 ata4.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133 ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133 ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: configured for UDMA/133 ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: configured for UDMA/133 ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: configured for UDMA/133 usb 4-1: new low speed USB device using ohci_hcd and address 2 ata1: softreset failed (device not ready) ata1: applying SB600 PMP SRST workaround and retrying usb 4-1: New USB device found, idVendor=09da, idProduct=000e usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-1: Product: PS/2+USB Mouse usb 4-1: Manufacturer: A4Tech usb 4-1: configuration #1 chosen from 1 choice input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:13.2/usb4/4-1/4-1:1.0/input/input2 generic-usb 0003:09DA:000E.0001: input: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:13.2-1/input0 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133 ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA scsi 1:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5 sda: sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sd 1:0:0:0: Attached scsi generic sg1 type 0 scsi 2:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5 sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: Attached scsi generic sg2 type 0 scsi 3:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5 sdc: sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 3:0:0:0: [sdd] Write Protect is off sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdd: sd 3:0:0:0: Attached scsi generic sg3 type 0 scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 sd 4:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 4:0:0:0: [sde] Write Protect is off sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sde: sd 4:0:0:0: Attached scsi generic sg4 type 0 sda1 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk sdd1 sdd2 sdd3 sdd4 sd 3:0:0:0: [sdd] Attached SCSI disk sdc1 sdc2 sdc3 sdc4 sd 2:0:0:0: [sdc] Attached SCSI disk sdb1 sdb3 sdb4 sd 1:0:0:0: [sdb] Attached SCSI disk sde1 sde2 sde3 sd 4:0:0:0: [sde] Attached SCSI disk usb 4-2: new low speed USB device using ohci_hcd and address 3 ALSA device list: #0: Asus Virtuoso 100 (rev 2) at 0xd800, irq 19 ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. powernow-k8: Found 1 AMD Phenom(tm) 9850 Quad-Core Processor processors (4 cpu cores) (version 2.20.00) powernow-k8: 0 : pstate 0 (2500 MHz) powernow-k8: 1 : pstate 1 (1250 MHz) registered taskstats version 1 usb 4-2: New USB device found, idVendor=046a, idProduct=0801 usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-2: Product: Wired Keyboard usb 4-2: Manufacturer: NOVATEK usb 4-2: configuration #1 chosen from 1 choice input: NOVATEK Wired Keyboard as /devices/pci0000:00/0000:00:13.2/usb4/4-2/4-2:1.0/input/input3 generic-usb 0003:046A:0801.0002: input: USB HID v1.10 Keyboard [NOVATEK Wired Keyboard] on usb-0000:00:13.2-2/input0 input: NOVATEK Wired Keyboard as /devices/pci0000:00/0000:00:13.2/usb4/4-2/4-2:1.1/input/input4 generic-usb 0003:046A:0801.0003: input: USB HID v1.10 Device [NOVATEK Wired Keyboard] on usb-0000:00:13.2-2/input1 ata6: SATA link down (SStatus 0 SControl 300) usb 1-3.1: new high speed USB device using ehci_hcd and address 5 usb 1-3.1: New USB device found, idVendor=05e3, idProduct=0608 usb 1-3.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 1-3.1: Product: USB2.0 Hub usb 1-3.1: configuration #1 chosen from 1 choice hub 1-3.1:1.0: USB hub found hub 1-3.1:1.0: 4 ports detected ata9: SATA link down (SStatus 0 SControl 300) md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 12 and added 12 devices. md: autorun ... md: considering sdb4 ... md: adding sdb4 ... md: sdb3 has different UUID to sdb4 md: sdb1 has different UUID to sdb4 md: adding sdc4 ... md: sdc3 has different UUID to sdb4 md: sdc1 has different UUID to sdb4 md: adding sdd4 ... md: sdd3 has different UUID to sdb4 md: sdd1 has different UUID to sdb4 md: adding sda4 ... md: sda3 has different UUID to sdb4 md: sda1 has different UUID to sdb4 md: created md13 md: bind md: bind md: bind md: bind md: running: raid5: device sdb4 operational as raid disk 2 raid5: device sdc4 operational as raid disk 0 raid5: device sdd4 operational as raid disk 1 raid5: device sda4 operational as raid disk 3 raid5: allocated 4270kB for md13 raid5: raid level 5 set md13 active with 4 out of 4 devices, algorithm 2 RAID5 conf printout: --- rd:4 wd:4 disk 0, o:1, dev:sdc4 disk 1, o:1, dev:sdd4 disk 2, o:1, dev:sdb4 disk 3, o:1, dev:sda4 md13: detected capacity change from 0 to 2968379719680 md: considering sdb3 ... md: adding sdb3 ... md: sdb1 has different UUID to sdb3 md: adding sdc3 ... md: sdc1 has different UUID to sdb3 md: adding sdd3 ... md: sdd1 has different UUID to sdb3 md: adding sda3 ... md: sda1 has different UUID to sdb3 md: created md12 md: bind md: bind md: bind md: bind md: running: raid5: device sdb3 operational as raid disk 2 raid5: device sdc3 operational as raid disk 0 raid5: device sdd3 operational as raid disk 1 raid5: device sda3 operational as raid disk 3 raid5: allocated 4270kB for md12 raid5: raid level 5 set md12 active with 4 out of 4 devices, algorithm 2 RAID5 conf printout: --- rd:4 wd:4 disk 0, o:1, dev:sdc3 disk 1, o:1, dev:sdd3 disk 2, o:1, dev:sdb3 disk 3, o:1, dev:sda3 md12: detected capacity change from 0 to 25761349632 md: considering sdb1 ... md: adding sdb1 ... md: sdc1 has different UUID to sdb1 md: sdd1 has different UUID to sdb1 md: adding sda1 ... md: created md11 md: bind md: bind md: running: raid0: looking at sdb1 raid0: comparing sdb1(4208768) with sdb1(4208768) raid0: END raid0: ==> UNIQUE raid0: 1 zones raid0: looking at sda1 raid0: comparing sda1(4208768) with sdb1(4208768) raid0: EQUAL raid0: FINAL 1 zones raid0: done. raid0 : md_size is 8417536 sectors. ******* md11 configuration ********* zone0=[sdb1/sda1/] zone offset=0kb device offset=0kb size=4208768kb ********************************** md11: detected capacity change from 0 to 4309778432 md: considering sdc1 ... md: adding sdc1 ... md: adding sdd1 ... md: created md10 md: bind md: bind md: running: raid1: raid set md10 active with 2 out of 2 mirrors md10: detected capacity change from 0 to 1077411840 md: ... autorun DONE. md12: unknown partition table EXT3-fs: md12: couldn't mount because of unsupported optional features (240). EXT2-fs: md12: couldn't mount because of unsupported optional features (240). EXT4-fs (md12): barriers enabled kjournald2 starting: pid 937, dev md12:8, commit interval 5 seconds EXT4-fs (md12): delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs (md12): mounted filesystem with ordered data mode VFS: Mounted root (ext4 filesystem) readonly on device 9:12. Freeing unused kernel memory: 492k freed udev: starting version 145 sata_mv 0000:08:00.0: version 1.28 sata_mv 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 sata_mv 0000:08:00.0: Gen-IIE 32 slots 4 ports ? mode IRQ via INTx sata_mv 0000:08:00.0: setting latency timer to 64 scsi10 : sata_mv scsi11 : sata_mv scsi12 : sata_mv scsi13 : sata_mv ata11: SATA max UDMA/133 mmio m1048576@0xfea00000 port 0xfea22000 irq 16 ata12: SATA max UDMA/133 mmio m1048576@0xfea00000 port 0xfea24000 irq 16 ata13: SATA max UDMA/133 mmio m1048576@0xfea00000 port 0xfea26000 irq 16 ata14: SATA max UDMA/133 mmio m1048576@0xfea00000 port 0xfea28000 irq 16 sky2 driver version 1.23 sky2 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 sky2 0000:04:00.0: setting latency timer to 64 sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3 sky2 0000:04:00.0: irq 31 for MSI/MSI-X sky2 eth0: addr 00:1e:8c:c0:f2:1d md10: md11: md13: unknown partition table unknown partition table unknown partition table ata11: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata11.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7 ata11.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata11.00: configured for UDMA/133 scsi 10:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 sd 10:0:0:0: Attached scsi generic sg5 type 0 sd 10:0:0:0: [sdf] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 10:0:0:0: [sdf] Write Protect is off sd 10:0:0:0: [sdf] Mode Sense: 00 3a 00 00 sd 10:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdf: unknown partition table sd 10:0:0:0: [sdf] Attached SCSI disk ata12: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata12.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7 ata12.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata12.00: configured for UDMA/133 scsi 11:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 sd 11:0:0:0: [sdg] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 11:0:0:0: Attached scsi generic sg6 type 0 sd 11:0:0:0: [sdg] Write Protect is off sd 11:0:0:0: [sdg] Mode Sense: 00 3a 00 00 sd 11:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdg: unknown partition table sd 11:0:0:0: [sdg] Attached SCSI disk ata13: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata13.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7 ata13.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata13.00: configured for UDMA/133 scsi 12:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 sd 12:0:0:0: [sdh] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 12:0:0:0: Attached scsi generic sg7 type 0 sd 12:0:0:0: [sdh] Write Protect is off sd 12:0:0:0: [sdh] Mode Sense: 00 3a 00 00 sd 12:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdh: unknown partition table sd 12:0:0:0: [sdh] Attached SCSI disk ata14: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata14.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7 ata14.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata14.00: configured for UDMA/133 scsi 13:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 sd 13:0:0:0: [sdi] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 13:0:0:0: Attached scsi generic sg8 type 0 sd 13:0:0:0: [sdi] Write Protect is off sd 13:0:0:0: [sdi] Mode Sense: 00 3a 00 00 sd 13:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdi: unknown partition table sd 13:0:0:0: [sdi] Attached SCSI disk [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. [drm:drm_init], [drm:drm_get_dev], radeon 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 radeon 0000:01:00.0: setting latency timer to 64 [drm:drm_get_minor], [drm:drm_get_minor], new minor assigned 64 [drm:drm_get_minor], [drm:drm_get_minor], new minor assigned 0 [drm] radeon: Initializing kernel modesetting. [drm] register mmio base: 0xFE3F0000 [drm] register mmio size: 65536 [drm:radeon_get_bios], ATOMBIOS detected ATOM BIOS: RV770PRO [drm] Clocks initialized ! [TTM] Zone kernel: Available graphics memory: 4092406 kiB. [TTM] Zone dma32: Available graphics memory: 2097152 kiB. [drm] radeon: 512M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm:r600_cp_init_microcode], [drm] Loading RV770 CP Microcode platform radeon_cp.0: firmware: requesting radeon/RV770_pfp.bin platform radeon_cp.0: firmware: requesting radeon/RV770_me.bin [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] ring test succeeded in 1 usecs [drm:r600_blit_init], r6xx blit allocated bo @ 0x 140000 00000a00 vs 00000800 ps 00000900 [drm] radeon: ib pool ready. [drm] ib test succeeded in 0 usecs [drm] radeon: kernel modesetting successfully initialized. [drm:drm_sysfs_connector_add], adding "DVI-I-1" to sysfs [drm:drm_sysfs_hotplug_event], generating hotplug event [drm:drm_sysfs_connector_add], adding "DVI-I-2" to sysfs [drm:drm_sysfs_hotplug_event], generating hotplug event [drm] Radeon Display Connectors [drm] Connector 0: [drm] DVI-I [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c [drm] Encoders: [drm] DFP1: INTERNAL_UNIPHY [drm] CRT2: INTERNAL_KLDSCP_DAC2 [drm] Connector 1: [drm] DVI-I [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c [drm] Encoders: [drm] CRT1: INTERNAL_KLDSCP_DAC1 [drm] DFP2: INTERNAL_KLDSCP_LVTMA [drm:drm_helper_probe_single_connector_modes], DVI-I-1 [drm:radeon_atom_dac_detect], Bios 0 scratch 20000 00000010 [drm:radeon_atombios_connected_scratch_regs], DFP1 disconnected [drm:radeon_atombios_connected_scratch_regs], CRT2 disconnected [drm:drm_helper_probe_single_connector_modes], DVI-I-1 is disconnected [drm:drm_helper_probe_single_connector_modes], DVI-I-2 [drm:radeon_atombios_connected_scratch_regs], CRT1 disconnected [drm:radeon_atombios_connected_scratch_regs], DFP2 connected [drm:drm_mode_debug_printmodeline], Modeline 37:"1920x540" 0 74250 1920 2448 2492 2640 540 542 547 562 0x40 0x15 [drm:drm_mode_prune_invalid], Not using 1920x540 mode 7 [drm:drm_mode_debug_printmodeline], Modeline 36:"1920x540" 0 74250 1920 2008 2052 2200 540 542 547 562 0x40 0x15 [drm:drm_mode_prune_invalid], Not using 1920x540 mode 7 [drm:drm_helper_probe_single_connector_modes], Probed modes for DVI-I-2 [drm:drm_mode_debug_printmodeline], Modeline 31:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [drm:drm_mode_debug_printmodeline], Modeline 33:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 32:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 27:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 19:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 28:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 29:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 30:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 35:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 34:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 20:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 21:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [drm:drm_mode_debug_printmodeline], Modeline 22:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [drm:drm_mode_debug_printmodeline], Modeline 23:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [drm:drm_mode_debug_printmodeline], Modeline 25:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 12:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 13:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [drm:drm_mode_debug_printmodeline], Modeline 15:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa [drm:drm_mode_debug_printmodeline], Modeline 14:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [drm:drm_mode_debug_printmodeline], Modeline 16:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [drm:drm_mode_debug_printmodeline], Modeline 17:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [drm:drm_mode_debug_printmodeline], Modeline 18:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [drm:drm_setup_crtcs], [drm:drm_enable_connectors], connector 6 enabled? no [drm:drm_enable_connectors], connector 9 enabled? yes [drm:drm_target_preferred], looking for preferred mode on connector 9 [drm:drm_target_preferred], found mode 1920x1200 [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [drm:drm_setup_crtcs], desired mode 1920x1200 set on crtc 3 [drm] fb mappable at 0xC0141000 [drm] vram apper at 0xC0000000 [drm] size 9216000 [drm] fb depth is 24 [drm] pitch is 7680 fb0: radeondrmfb frame buffer device registered panic notifier [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0 [drm:drm_get_dev], radeon 0000:02:00.0: enabling device (0000 -> 0003) radeon 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 radeon 0000:02:00.0: setting latency timer to 64 [drm:drm_get_minor], [drm:drm_get_minor], new minor assigned 65 [drm:drm_get_minor], [drm:drm_get_minor], new minor assigned 1 [drm] radeon: Initializing kernel modesetting. [drm] register mmio base: 0xFE4F0000 [drm] register mmio size: 65536 [drm:radeon_get_bios], ATOMBIOS detected ATOM BIOS: RV770PRO [drm] GPU not posted. posting now... [drm] Clocks initialized ! [drm] radeon: 512M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm:r600_cp_init_microcode], [drm] Loading RV770 CP Microcode platform radeon_cp.0: firmware: requesting radeon/RV770_pfp.bin platform radeon_cp.0: firmware: requesting radeon/RV770_me.bin [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] ring test succeeded in 1 usecs [drm:r600_blit_init], r6xx blit allocated bo @ 0x 140000 00000a00 vs 00000800 ps 00000900 [drm] radeon: ib pool ready. [drm] ib test succeeded in 0 usecs [drm] radeon: kernel modesetting successfully initialized. [drm:drm_sysfs_connector_add], adding "DVI-I-3" to sysfs [drm:drm_sysfs_hotplug_event], generating hotplug event [drm:drm_sysfs_connector_add], adding "DVI-I-4" to sysfs [drm:drm_sysfs_hotplug_event], generating hotplug event [drm] Radeon Display Connectors [drm] Connector 0: [drm] DVI-I [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c [drm] Encoders: [drm] DFP1: INTERNAL_UNIPHY [drm] CRT2: INTERNAL_KLDSCP_DAC2 [drm] Connector 1: [drm] DVI-I [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c [drm] Encoders: [drm] CRT1: INTERNAL_KLDSCP_DAC1 [drm] DFP2: INTERNAL_KLDSCP_LVTMA [drm:drm_helper_probe_single_connector_modes], DVI-I-3 [drm:radeon_atom_dac_detect], Bios 0 scratch 0 00000010 [drm:radeon_atombios_connected_scratch_regs], DFP1 disconnected [drm:radeon_atombios_connected_scratch_regs], CRT2 disconnected [drm:drm_helper_probe_single_connector_modes], DVI-I-3 is disconnected [drm:drm_helper_probe_single_connector_modes], DVI-I-4 [drm:radeon_atom_dac_detect], Bios 0 scratch 0 00000001 [drm:radeon_atombios_connected_scratch_regs], CRT1 disconnected [drm:radeon_atombios_connected_scratch_regs], DFP2 disconnected [drm:drm_helper_probe_single_connector_modes], DVI-I-4 is disconnected ------------[ cut here ]------------ WARNING: at drivers/gpu/drm/drm_crtc_helper.c:950 drm_helper_initial_config+0x7a/0x80 [drm_kms_helper]() Hardware name: System Product Name Connected connector with 0 modes Modules linked in: radeon(+) ttm drm_kms_helper drm fb sky2 i2c_algo_bit cfbcopyarea cfbimgblt cfbfillrect sata_mv Pid: 1086, comm: modprobe Not tainted 2.6.31-rc9-27054-g6cf8a3f #6 Call Trace: [] ? drm_helper_initial_config+0x7a/0x80 [drm_kms_helper] [] warn_slowpath_common+0x80/0xe0 [] warn_slowpath_fmt+0x76/0xa0 [] ? drm_helper_probe_single_connector_modes+0x1c1/0x300 [drm_kms_helper] [] ? drm_helper_probe_connector_modes+0x4e/0xa0 [drm_kms_helper] [] drm_helper_initial_config+0x7a/0x80 [drm_kms_helper] [] radeon_modeset_init+0x2a9/0x560 [radeon] [] ? radeon_device_init+0x450/0x630 [radeon] [] radeon_driver_load_kms+0xa0/0x130 [radeon] [] drm_get_dev+0x30c/0x4b0 [drm] [] ? kobject_get+0x29/0x50 [] radeon_pci_probe+0x23/0x29c [radeon] [] local_pci_probe+0x25/0x40 [] pci_device_probe+0xa0/0xd0 [] driver_probe_device+0xb2/0x1d0 [] __driver_attach+0xb3/0xc0 [] ? __driver_attach+0x0/0xc0 [] bus_for_each_dev+0x6b/0xb0 [] driver_attach+0x2f/0x50 [] bus_add_driver+0x210/0x280 [] driver_register+0x8c/0x170 [] __pci_register_driver+0x69/0xf0 [] ? radeon_init+0x0/0xf3 [radeon] [] drm_init+0x10f/0x120 [drm] [] ? radeon_init+0x0/0xf3 [radeon] [] radeon_init+0x59/0xf3 [radeon] [] do_one_initcall+0x46/0x1c0 [] sys_init_module+0x102/0x270 [] system_call_fastpath+0x16/0x1b ---[ end trace a002ba32fc02e29b ]--- [drm:drm_setup_crtcs], [drm:drm_enable_connectors], connector 6 enabled? no [drm:drm_enable_connectors], connector 9 enabled? no [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [drm] Initialized radeon 2.0.0 20080528 for 0000:02:00.0 on minor 1 md: md1 stopped. md: bind md: bind md: bind md: bind raid5: device sdi operational as raid disk 0 raid5: device sdg operational as raid disk 3 raid5: device sdf operational as raid disk 2 raid5: device sdh operational as raid disk 1 raid5: allocated 4270kB for md1 raid5: raid level 5 set md1 active with 4 out of 4 devices, algorithm 2 RAID5 conf printout: --- rd:4 wd:4 disk 0, o:1, dev:sdi disk 1, o:1, dev:sdh disk 2, o:1, dev:sdf disk 3, o:1, dev:sdg md1: detected capacity change from 0 to 1500321939456 md1: unknown partition table EXT4-fs (md12): warning: maximal mount count reached, running e2fsck is recommended EXT4-fs (md12): internal journal on md12:8 EXT4-fs (md11): barriers enabled EXT4-fs (md11): warning: maximal mount count reached, running e2fsck is recommended kjournald2 starting: pid 1486, dev md11:8, commit interval 5 seconds EXT4-fs (md11): internal journal on md11:8 EXT4-fs (md11): delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs (md11): mounted filesystem with ordered data mode Filesystem "md13": Disabling barriers, trial barrier write failed XFS mounting filesystem md13 Ending clean XFS mount for filesystem: md13 Filesystem "md1": Disabling barriers, trial barrier write failed XFS mounting filesystem md1 Ending clean XFS mount for filesystem: md1 sky2 eth0: enabling interface ADDRCONF(NETDEV_UP): eth0: link is not ready JBD: barrier-based sync failed on md12:8 - disabling barriers sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], crtc: ffff88023c75c000 3 fb: ffff88023e3bf840 connectors: ffff88023f9a6c80 num_connectors: 1 (x, y) (0, 0) [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [drm:drm_crtc_helper_set_config], modes are different, full mode set [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [drm:drm_mode_debug_printmodeline], Modeline 36:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [drm:drm_crtc_helper_set_config], setting connector 9 crtc to ffff88023c75c000 [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [drm:drm_mode_debug_printmodeline], Modeline 36:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 3, devices 00000080, active_devices 00000000 [drm:radeon_encoder_set_active_device], setting active device to 00000080 from 00000080 00000081 for encoder 2 [drm:radeon_atom_encoder_dpms], encoder dpms 30 to mode 3, devices 00000008, active_devices 00000000 [drm:radeon_atom_encoder_dpms], encoder dpms 22 to mode 3, devices 00000010, active_devices 00000000 [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000 [drm:radeon_compute_pll], PLL freq 154000 2 1023 executing set pll executing set crtc timing [drm] TMDS-10: set mode 1920x1200 24 [drm:avivo_crtc_load_lut], 0 [drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 0, devices 00000080, active_devices 00000080 [drm:radeon_atom_encoder_dpms], encoder dpms 30 to mode 3, devices 00000008, active_devices 00000000 [drm:radeon_atom_encoder_dpms], encoder dpms 22 to mode 3, devices 00000010, active_devices 00000000 [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000 Console: switching to colour frame buffer device 240x75 [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], crtc: ffff88023c75c000 3 fb: ffff88023e3bf840 connectors: ffff88023f9a6c80 num_connectors: 1 (x, y) (0, 0) [drm:drm_crtc_helper_set_config], setting connector 9 crtc to ffff88023c75c000