Initializing cgroup subsys cpu Linux version 2.6.31.1 (root@kumiko) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu4) ) #1 PREEMPT Wed Sep 30 10:54:42 CEST 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 0000000000100000 - 000000003ffaa800 (usable) BIOS-e820: 000000003ffaa800 - 0000000040000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) BIOS-e820: 00000000feda0000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) DMI 2.3 present. last_pfn = 0x3ffaa max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask FC0000000 write-back 1 base 0FEDA0000 mask FFFFE0000 write-combining 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 01800000 init_memory_mapping: 0000000000000000-00000000377fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037400000 page 2M 0037400000 - 00377fe000 page 4k kernel direct mapping tables up to 377fe000 @ 7000-c000 RAMDISK: 2fdbb000 - 2ffffd0c ACPI: RSDP 000fde90 00014 (v00 DELL ) ACPI: RSDT 3ffefbcd 00030 (v01 DELL CPi R 27D50308 ASL 00000061) ACPI: FACP 3fff0400 00074 (v01 DELL CPi R 27D50308 ASL 00000061) ACPI: DSDT 3fff1000 024E3 (v01 INT430 SYSFexxx 00001001 MSFT 0100000E) ACPI: FACS 3ffff800 00040 ACPI: APIC 3fff0c00 00068 (v01 DELL CPi R 27D50308 ASL 00000047) ACPI: SSDT 3ffefbfd 001FB (v01 PmRef CpuPm 00003000 INTL 20030522) ACPI: Local APIC address 0xfee00000 135MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 node 0 low ram: 00000000 - 377fe000 node 0 bootmap 00008000 - 0000ef00 (7 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0001000000 - 00013bfd04] TEXT DATA BSS ==> [0001000000 - 00013bfd04] #2 [002fdbb000 - 002ffffd0c] RAMDISK ==> [002fdbb000 - 002ffffd0c] #3 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #4 [00013c0000 - 00013c6158] BRK ==> [00013c0000 - 00013c6158] #5 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #6 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x0003ffaa Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0003ffaa On node 0 totalpages: 261961 free_area_init_node: node 0, pgdat c132d1b8, node_mem_map c13c7000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3967 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 272 pages used for memmap HighMem zone: 34460 pages, LIFO batch:7 Using APIC driver default ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored. ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information nr_irqs_gsi: 24 Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259913 Kernel command line: BOOT_IMAGE=/usr/src/linux-2.6.31.1/arch/x86/boot/bzImage root=/dev/sda2 ro gfxpayload=1024x768 quiet PID hash table entries: 4096 (order: 12, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Initializing HighMem for node 0 (000377fe:0003ffaa) Memory: 1032176k/1048232k available (2237k kernel code, 15208k reserved, 1024k data, 296k init, 138928k highmem) virtual kernel memory layout: fixmap : 0xfffa4000 - 0xfffff000 ( 364 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc1330000 - 0xc137a000 ( 296 kB) .data : 0xc122f7d9 - 0xc132fab4 (1024 kB) .text : 0xc1000000 - 0xc122f7d9 (2237 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 NR_IRQS:288 CPU 0 irqstacks, hard=c12fa000 soft=c12fb000 Fast TSC calibration using PIT Detected 3192.122 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Calibrating delay loop (skipped), value calculated using timer frequency.. 6384.24 BogoMIPS (lpj=3192122) Mount-cache hash table entries: 512 Initializing cgroup subsys cpuacct CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K mce: CPU supports 4 MCE banks CPU0: Thermal monitoring enabled (TM1) using mwait in idle threads. CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 04 Checking 'hlt' instruction... OK. ACPI: Core revision 20090521 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfcc7e, last bus=2 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: Enabling MCH 'Overflow' Device pci 0000:00:00.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff] pci 0000:00:06.0: reg 10 32bit mmio: [0xfecf0000-0xfecf0fff] pci 0000:00:1d.0: reg 20 io port: [0xbf80-0xbf9f] pci 0000:00:1d.1: reg 20 io port: [0xbf60-0xbf7f] pci 0000:00:1d.2: reg 20 io port: [0xbf40-0xbf5f] pci 0000:00:1d.3: reg 20 io port: [0xbf20-0xbf3f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf8fffc00-0xf8ffffff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH4 GPIO pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377] pci 0000:00:1f.1: reg 20 io port: [0xbfa0-0xbfaf] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] pci 0000:00:1f.5: reg 10 io port: [0xd800-0xd8ff] pci 0000:00:1f.5: reg 14 io port: [0xdc40-0xdc7f] pci 0000:00:1f.5: reg 18 32bit mmio: [0xf8fff800-0xf8fff9ff] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xf8fff400-0xf8fff4ff] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold pci 0000:00:1f.5: PME# disabled pci 0000:00:1f.6: reg 10 io port: [0xd400-0xd4ff] pci 0000:00:1f.6: reg 14 io port: [0xd080-0xd0ff] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold pci 0000:00:1f.6: PME# disabled pci 0000:01:00.0: reg 10 32bit mmio: [0xe0000000-0xefffffff] pci 0000:01:00.0: reg 14 io port: [0xc000-0xc0ff] pci 0000:01:00.0: reg 18 32bit mmio: [0xfcff0000-0xfcffffff] pci 0000:01:00.0: reg 30 32bit mmio: [0x80000000-0x8001ffff] pci 0000:01:00.0: supports D1 D2 pci 0000:00:01.0: bridge io port: [0xc000-0xcfff] pci 0000:00:01.0: bridge 32bit mmio: [0xfc000000-0xfdffffff] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xefffffff] pci 0000:02:00.0: reg 10 32bit mmio: [0xfaffe000-0xfaffffff] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:02:01.0: reg 10 32bit mmio: [0x000000-0x000fff] pci 0000:02:01.0: supports D1 D2 pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:01.0: PME# disabled pci 0000:02:01.1: reg 10 32bit mmio: [0xfaffd800-0xfaffdfff] pci 0000:02:01.1: reg 14 32bit mmio: [0xfaff8000-0xfaffbfff] pci 0000:02:01.1: supports D1 D2 pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot pci 0000:02:01.1: PME# disabled pci 0000:02:03.0: reg 10 32bit mmio: [0xfaff6000-0xfaff7fff] pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0xe000-0xefff] pci 0000:00:1e.0: bridge 32bit mmio: [0xfa000000-0xfbffffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11 ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing cfg80211: Calling CRDA to update world regulatory domain hpet clockevent registered hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:02: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:02: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:03: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:03: io resource (0x1010-0x105f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:03: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered system 00:00: iomem range 0x0-0x9fbff could not be reserved system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved system 00:00: iomem range 0xc0000-0xcffff could not be reserved system 00:00: iomem range 0xe0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0x3ffeffff could not be reserved system 00:00: iomem range 0x3fff0000-0x3fffffff has been reserved system 00:00: iomem range 0xfeda0000-0xfedfffff has been reserved system 00:00: iomem range 0xffb00000-0xffbfffff has been reserved system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved system 00:00: iomem range 0xfee00000-0xfee0ffff has been reserved system 00:00: iomem range 0xfed20000-0xfed8ffff has been reserved system 00:00: iomem range 0xfecf0000-0xfecf0fff has been reserved system 00:02: ioport range 0x4d0-0x4d1 has been reserved system 00:02: ioport range 0x800-0x80f has been reserved system 00:03: ioport range 0xf400-0xf4fe has been reserved system 00:03: ioport range 0x1080-0x10bf has been reserved system 00:03: ioport range 0x10c0-0x10df has been reserved system 00:03: ioport range 0x10e0-0x10ff has been reserved system 00:08: ioport range 0x900-0x97f has been reserved pci 0000:01:00.0: BAR 6: no parent found for of device [0x80000000-0x8001ffff] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0xc000-0xcfff pci 0000:00:01.0: MEM window: 0xfc000000-0xfdffffff pci 0000:00:01.0: PREFETCH window: 0xe0000000-0xefffffff pci 0000:02:01.0: CardBus bridge, secondary bus 0000:03 pci 0000:02:01.0: IO window: 0x00e000-0x00e0ff pci 0000:02:01.0: IO window: 0x00e400-0x00e4ff pci 0000:02:01.0: PREFETCH window: 0x40000000-0x43ffffff pci 0000:02:01.0: MEM window: 0x48000000-0x4bffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1e.0: IO window: 0xe000-0xefff pci 0000:00:1e.0: MEM window: 0xfa000000-0xfbffffff pci 0000:00:1e.0: PREFETCH window: 0x40000000-0x43ffffff pci 0000:00:1e.0: setting latency timer to 64 pci 0000:02:01.0: enabling device (0000 -> 0003) pci 0000:02:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] pci_bus 0000:01: resource 1 mem: [0xfc000000-0xfdffffff] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff] pci_bus 0000:02: resource 0 io: [0xe000-0xefff] pci_bus 0000:02: resource 1 mem: [0xfa000000-0xfbffffff] pci_bus 0000:02: resource 2 pref mem [0x40000000-0x43ffffff] pci_bus 0000:02: resource 3 io: [0x00-0xffff] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] pci_bus 0000:03: resource 0 io: [0xe000-0xe0ff] pci_bus 0000:03: resource 1 io: [0xe400-0xe4ff] pci_bus 0000:03: resource 2 pref mem [0x40000000-0x43ffffff] pci_bus 0000:03: resource 3 mem: [0x48000000-0x4bffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... Freeing initrd memory: 2323k freed apm: BIOS not found. audit: initializing netlink socket (disabled) type=2000 audit(1254309294.226:1): initialized highmem bounce pool size: 64 pages msgmni has been set to 1750 alg: No test for stdrng (krng) io scheduler noop registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device ACPI: AC Adapter [AC] (on-line) input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button [PBTN] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 ACPI: Sleep Button [SBTN] resource map sanity check conflict: 0x3ffefe54 0x3fff002b 0x3fff0000 0x3fffffff pnp 00:00 ------------[ cut here ]------------ WARNING: at arch/x86/mm/ioremap.c:205 __ioremap_caller+0x65/0x20b() Hardware name: Inspiron 9100 Info: mapping multiple BARs. Your kernel is fine. Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.31.1 #1 Call Trace: [] warn_slowpath_common+0x65/0x7c [] ? __ioremap_caller+0x65/0x20b [] warn_slowpath_fmt+0x24/0x27 [] __ioremap_caller+0x65/0x20b [] ? acpi_ns_search_and_enter+0x8f/0x142 [] ioremap_nocache+0x10/0x12 [] ? acpi_os_map_memory+0x11/0x1a [] acpi_os_map_memory+0x11/0x1a [] acpi_ex_system_memory_space_handler+0xf1/0x1e2 [] acpi_ev_address_space_dispatch+0x13e/0x182 [] ? acpi_ex_system_memory_space_handler+0x0/0x1e2 [] acpi_ex_load_op+0x93/0x265 [] ? acpi_ex_resolve_to_value+0x1ba/0x1c8 [] ? acpi_ex_resolve_operands+0x17b/0x3f4 [] acpi_ex_opcode_1A_1T_0R+0x20/0x44 [] acpi_ds_exec_end_op+0xd0/0x35e [] acpi_ps_parse_loop+0x5d3/0x719 [] acpi_ps_parse_aml+0x89/0x283 [] acpi_ps_execute_method+0x197/0x250 [] acpi_ns_evaluate+0xc6/0x178 [] acpi_evaluate_object+0x102/0x1f1 [] ? arch_acpi_processor_init_pdc+0x74/0x117 [] acpi_processor_start+0x340/0x480 [] ? sysfs_addrm_finish+0x15/0x1d8 [] ? sysfs_do_create_link+0xbf/0x10a [] acpi_start_single_object+0x1e/0x3f [] acpi_device_probe+0x81/0x13a [] driver_probe_device+0x78/0xeb [] __driver_attach+0x43/0x5f [] bus_for_each_dev+0x3d/0x67 [] driver_attach+0x14/0x16 [] ? __driver_attach+0x0/0x5f [] bus_add_driver+0x94/0x1be [] driver_register+0x79/0xe0 [] acpi_bus_register_driver+0x3a/0x3c [] acpi_processor_init+0x63/0x9b [] ? acpi_processor_init+0x0/0x9b [] _stext+0x4b/0x130 [] kernel_init+0x81/0xd2 [] ? kernel_init+0x0/0xd2 [] kernel_thread_helper+0x7/0x10 ---[ end trace a7919e7f17c0a725 ]--- ACPI: SSDT 3ffefe54 001D8 (v01 PmRef Cpu0Cst 00003001 INTL 20030522) processor LNXCPU:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM] (64 C) ACPI: Battery Slot [BAT0] (battery absent) intel_rng: FWH not detected Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial 0000:00:1f.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17 serial 0000:00:1f.6: PCI INT B disabled loop: module loaded nbd: registered device at major 43 ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15 yenta_cardbus 0000:02:01.0: CardBus bridge found [1028:0159] yenta_cardbus 0000:02:01.0: Using CSCINT to route CSC interrupts to PCI yenta_cardbus 0000:02:01.0: Routing CardBus interrupts to PCI yenta_cardbus 0000:02:01.0: TI: mfunc 0x012c1202, devctl 0x64 ata2.00: ATAPI: Samsung CD-RW/DVD-ROM SN-324B, U102, max UDMA/33 ata1.00: ATA-6: HTS548060M9AT00, MGBOA53A, max UDMA/100 ata1.00: 117210240 sectors, multi 8: LBA48 ata2.00: configured for UDMA/33 ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA HTS548060M9AT00 MGBO PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: CD-ROM SAMSUNG CDRW/DVD SN-324B U102 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 0x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0cf8, PCI irq 19 yenta_cardbus 0000:02:01.0: Socket status: 30000086 pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06 yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0xfa000000 - 0xfbffffff yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff usbmon: debugfs is not available ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8fffc00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.31.1 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bf80 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.31.1 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000bf60 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.31.1 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bf40 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.31.1 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bf20 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.31.1 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one day, 114 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered NET: Registered protocol family 17 p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available Using IPI Shortcut mode rtc_cmos 00:06: setting system clock to 2009-09-30 11:14:54 UTC (1254309294) Freeing unused kernel memory: 296k freed input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 Switched to high resolution mode on CPU 0 b44 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 fuse init (API version 7.12) ssb: Sonics Silicon Backplane found on PCI device 0000:02:00.0 b44.c:v2.0 usb 1-4: new high speed USB device using ehci_hcd and address 2 eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:0f:1f:2a:47:6d usb 1-4: New USB device found, idVendor=04cc, idProduct=1521 usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-4: configuration #1 chosen from 1 choice hub 1-4:1.0: USB hub found hub 1-4:1.0: 6 ports detected kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with writeback data mode. input: DualPoint Stick as /devices/platform/i8042/serio1/input/input4 input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input5 usb 1-4.1: new high speed USB device using ehci_hcd and address 4 usb 1-4.1: New USB device found, idVendor=0b95, idProduct=7720 usb 1-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-4.1: Product: AX88772 usb 1-4.1: Manufacturer: ASIX Elec. Corp. usb 1-4.1: SerialNumber: 000001 usb 1-4.1: configuration #1 chosen from 1 choice usb 1-4.6: new full speed USB device using ehci_hcd and address 5 usb 1-4.6: New USB device found, idVendor=0451, idProduct=2046 usb 1-4.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-4.6: configuration #1 chosen from 1 choice hub 1-4.6:1.0: USB hub found hub 1-4.6:1.0: 4 ports detected usb 4-2: new low speed USB device using uhci_hcd and address 2 usb 4-2: New USB device found, idVendor=046d, idProduct=c517 usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-2: Product: USB Receiver usb 4-2: Manufacturer: Logitech usb 4-2: configuration #1 chosen from 1 choice input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input6 logitech 0003:046D:C517.0001: input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.2-2/input0 logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/input/input7 logitech 0003:046D:C517.0002: input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-2/input1 usb 1-4.6.1: new low speed USB device using ehci_hcd and address 6 usb 1-4.6.1: New USB device found, idVendor=0711, idProduct=0260 usb 1-4.6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-4.6.1: Product: USB PS/2 Keyboard - PS/2 Mouse usb 1-4.6.1: Manufacturer: MCT usb 1-4.6.1: configuration #1 chosen from 1 choice input: MCT USB PS/2 Keyboard - PS/2 Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.6/1-4.6.1/1-4.6.1:1.0/input/input8 generic-usb 0003:0711:0260.0003: input: USB HID v1.00 Keyboard [MCT USB PS/2 Keyboard - PS/2 Mouse] on usb-0000:00:1d.7-4.6.1/input0 input: MCT USB PS/2 Keyboard - PS/2 Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.6/1-4.6.1/1-4.6.1:1.1/input/input9 generic-usb 0003:0711:0260.0004: input: USB HID v1.00 Mouse [MCT USB PS/2 Keyboard - PS/2 Mouse] on usb-0000:00:1d.7-4.6.1/input1 usb 1-4.6.2: new full speed USB device using ehci_hcd and address 7 usb 1-4.6.2: New USB device found, idVendor=067b, idProduct=2305 usb 1-4.6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-4.6.2: Product: IEEE-1284 Controller usb 1-4.6.2: Manufacturer: Prolific Technology Inc. usb 1-4.6.2: configuration #1 chosen from 1 choice usblp0: USB Bidirectional printer dev 7 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 usb 1-4.6.3: new full speed USB device using ehci_hcd and address 8 usb 1-4.6.3: New USB device found, idVendor=067b, idProduct=2303 usb 1-4.6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-4.6.3: Product: USB-Serial Controller usb 1-4.6.3: Manufacturer: Prolific Technology Inc. usb 1-4.6.3: configuration #1 chosen from 1 choice usb 1-4.6.4: new full speed USB device using ehci_hcd and address 9 usb 1-4.6.4: New USB device found, idVendor=0d8c, idProduct=000c usb 1-4.6.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 1-4.6.4: Product: C-Media USB Headphone Set usb 1-4.6.4: configuration #1 chosen from 1 choice input: C-Media USB Headphone Set as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.6/1-4.6.4/1-4.6.4:1.3/input/input10 generic-usb 0003:0D8C:000C.0005: input: USB HID v1.00 Device [C-Media USB Headphone Set ] on usb-0000:00:1d.7-4.6.4/input3 udev: starting version 147 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 865 Chipset agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000 dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [drm] Initialized drm 1.1.0 20060810 [drm] radeon default to kernel modesetting. [drm] radeon kernel modesetting enabled. radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [drm] radeon: Initializing kernel modesetting. [drm] register mmio base: 0xFCFF0000 [drm] register mmio size: 65536 [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [drm] Clocks initialized ! [drm] Generation 2 PCI interface, using max accessible memory [drm] Detected VRAM RAM=256M, BAR=256M [drm] RAM width 128bits DDR [drm] radeon: 2 quad pipes, 1 z pipes initialized. agpgart-intel 0000:00:00.0: AGP 3.0 bridge agpgart-intel 0000:00:00.0: putting AGP V3 device into 4x mode radeon 0000:01:00.0: putting AGP V3 device into 4x mode [drm] radeon: VRAM 256M [drm] radeon: VRAM from 0x00000000 to 0x0FFFFFFF [drm] radeon: GTT 128M [drm] radeon: GTT from 0xF0000000 to 0xF7FFFFFF [drm] radeon: irq initialized. [TTM] TTM available graphics memory: 505 MiB [TTM] TTM available object memory: 437 MiB [drm] radeon: 256M of VRAM memory ready [drm] radeon: 128M of GTT memory ready. [drm] radeon: cp idle (0x10000C03) [drm] Loading R400 Microcode [drm] radeon: ring at 0x00000000F0000000 [drm] ring test succeeded in 1 usecs [drm] radeon: ib pool ready. [drm] ib test succeeded in 0 usecs [drm] DFP table revision: 4 [drm] Panel ID String: [drm] Panel Size 0x0 [drm] Radeon Display Connectors [drm] Connector 0: [drm] DVI-I [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [drm] Encoders: [drm] CRT2: INTERNAL_DAC2 [drm] DFP1: INTERNAL_TMDS1 [drm] Connector 1: [drm] VGA [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [drm] Encoders: [drm] CRT1: INTERNAL_DAC1 [drm] Connector 2: [drm] LVDS [drm] Encoders: [drm] LCD1: INTERNAL_LVDS i2c-adapter i2c-0: unable to read EDID block. radeon 0000:01:00.0: DVI-I-1: no EDID data eth1: register 'asix' at usb-0000:00:1d.7-4.1, ASIX AX88772 USB 2.0 Ethernet, 00:05:1b:00:04:40 usbcore: registered new interface driver asix [drm] fb mappable at 0xE0040000 [drm] vram apper at 0xE0000000 [drm] size 3145728 [drm] fb depth is 24 [drm] pitch is 4096 [drm] DAC-8: set mode 1024x768 17 Console: switching to colour frame buffer device 128x48 fb0: radeondrmfb frame buffer device registered panic notifier [drm] radeon: kernel modesetting successfully initialized. [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0 Adding 1959888k swap on /dev/sda1. Priority:-1 extents:1 across:1959888k EXT3 FS on sda2, internal journal b44: eth0: Link is up at 100 Mbps, full duplex. b44: eth0: Flow control is off for TX and off for RX. divide error: 0000 [#1] PREEMPT last sysfs file: /sys/devices/pci0000:00/0000:00:1e.0/0000:02:03.0/resource Modules linked in: cpufreq_powersave radeon ttm drm asix dcdbas i2c_algo_bit intel_agp usbnet agpgart b44 ssb mii fuse Pid: 2220, comm: Xorg Tainted: G W (2.6.31.1 #1) Inspiron 9100 EIP: 0060:[] EFLAGS: 00013246 CPU: 0 EIP is at radeon_crtc_scaling_mode_fixup+0xce/0x171 [radeon] EAX: 00000006 EBX: f6b6e000 ECX: 00000000 EDX: 00000000 ESI: 00000000 EDI: 00000000 EBP: f6b05c7c ESP: f6b05c64 DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 Process Xorg (pid: 2220, ti=f6b05000 task=f6a31880 task.ti=f6b05000) Stack: 00300000 00000000 00000006 f823e23c f73c565c f6b6e0e8 f6b05c84 f81f3a73 <0> f6b05d8c f80aa8b1 00000000 00000000 00000010 00000000 f823e23c f73c5660 <0> efd31e00 f73c5400 efd31400 f6b6e000 efd31300 efd31300 00000017 dededede Call Trace: [] ? radeon_crtc_mode_fixup+0x8/0xa [radeon] [] ? drm_crtc_helper_set_mode+0x149/0x341 [drm] [] ? drm_crtc_helper_set_config+0x446/0x5a9 [drm] [] ? drm_mode_object_find+0x45/0x4d [drm] [] ? drm_mode_setcrtc+0x241/0x262 [drm] [] ? drm_ioctl+0x1ef/0x27c [drm] [] ? drm_mode_setcrtc+0x0/0x262 [drm] [] ? unlock_page+0x3d/0x40 [] ? vfs_ioctl+0x57/0x71 [] ? do_vfs_ioctl+0x46c/0x4aa [] ? handle_mm_fault+0x1fe/0x495 [] ? sys_ioctl+0x2e/0x48 [] ? sysenter_do_call+0x12/0x26 Code: 00 00 c1 e7 0c 89 55 e8 c7 45 ec 00 00 00 00 8b 45 e8 8b 55 ec 0f a4 c2 0d c1 e0 0d 89 55 f0 89 c1 31 f6 85 d2 74 0b 89 d0 31 d2 f7 89 55 f0 89 c6 8b 55 f0 89 c8 f7 f7 89 f2 89 c6 89 d7 83 EIP: [] radeon_crtc_scaling_mode_fixup+0xce/0x171 [radeon] SS:ESP 0068:f6b05c64 ---[ end trace a7919e7f17c0a727 ]---