Linux version 2.6.32-rc4-next-20091013 (root@symphony) (gcc version 4.3.3 (Gentoo 4.3.3-r2 p1.2, pie-10.1.5) ) #5 SMP PREEMPT Tue Oct 13 23:17:51 BST 2009 Command line: root=/dev/sdb6 splash=silent,fadein,theme:default console=tty1 quiet video=uvesafb:1280x1024-32,mtrr:3,ywrap KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cfef0000 (usable) BIOS-e820: 00000000cfef0000 - 00000000cfef3000 (ACPI NVS) BIOS-e820: 00000000cfef3000 - 00000000cff00000 (ACPI data) BIOS-e820: 00000000f0000000 - 00000000f2000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000130000000 (usable) DMI 2.4 present. Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0x130000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CEFFF write-protect CF000-EFFFF uncachable F0000-FFFFF write-through MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 080000000 mask FC0000000 write-back 2 base 0C0000000 mask FF0000000 write-back 3 base 100000000 mask FE0000000 write-back 4 base 120000000 mask FF0000000 write-back 5 base 0CFF00000 mask FFFF00000 uncachable 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xcfef0 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000cfef0000 0000000000 - 00cfe00000 page 2M 00cfe00000 - 00cfef0000 page 4k kernel direct mapping tables up to cfef0000 @ 10000-16000 init_memory_mapping: 0000000100000000-0000000130000000 0100000000 - 0130000000 page 2M kernel direct mapping tables up to 130000000 @ 14000-1a000 RAMDISK: 37f51000 - 37fef610 ACPI: RSDP 00000000000f7c40 00024 (v02 Nvidia) ACPI: XSDT 00000000cfef30c0 0004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) ACPI: FACP 00000000cfefb780 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000) ACPI: DSDT 00000000cfef3240 084C3 (v01 NVIDIA AWRDACPI 00001000 MSFT 03000000) ACPI: FACS 00000000cfef0000 00040 ACPI: HPET 00000000cfefb9c0 00038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098) ACPI: MCFG 00000000cfefba40 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) ACPI: APIC 00000000cfefb8c0 00098 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) ACPI: SSDT 00000000cfefc140 00304 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) ACPI: Local APIC address 0xfee00000 (8 early reservations) ==> bootmem [0000000000 - 0130000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 0001706424] TEXT DATA BSS ==> [0001000000 - 0001706424] #3 [0037f51000 - 0037fef610] RAMDISK ==> [0037f51000 - 0037fef610] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #5 [0001707000 - 0001707159] BRK ==> [0001707000 - 0001707159] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000] #7 [0000014000 - 0000015000] PGTABLE ==> [0000014000 - 0000015000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00130000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x000cfef0 0: 0x00100000 -> 0x00130000 On node 0 totalpages: 1048191 DMA zone: 56 pages used for memmap DMA zone: 105 pages reserved DMA zone: 3822 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 833320 pages, LIFO batch:31 Normal zone: 2688 pages used for memmap Normal zone: 193920 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x10de8201 base: 0xfeff0000 SMP: Allowing 4 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 Allocating PCI resources starting at d0000000 (gap: cff00000:20100000) NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 24 pages/cpu @ffff880028200000 s68632 r8192 d21480 u524288 pcpu-alloc: s68632 r8192 d21480 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1031062 Kernel command line: root=/dev/sdb6 splash=silent,fadein,theme:default console=tty1 quiet video=uvesafb:1280x1024-32,mtrr:3,ywrap PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 software IO TLB at phys 0x20000000 - 0x24000000 Memory: 4051852k/4980736k available (3947k kernel code, 787972k absent, 139920k reserved, 1831k data, 536k init) Hierarchical RCU implementation. NR_IRQS:384 Extended CMOS year: 2000 spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty1] enabled hpet clockevent registered Fast TSC calibration using PIT Detected 2400.269 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.53 BogoMIPS (lpj=2400269) Security Framework initialized Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM1) using mwait in idle threads. Freeing SMP alternatives: 25k freed ACPI: Core revision 20090903 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4799.56 BogoMIPS (lpj=2399784) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 mce: CPU supports 6 MCE banks CPU1: Thermal monitoring enabled (TM1) CPU1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#1]: passed. Booting processor 2 APIC 0x3 ip 0x6000 Initializing CPU#2 Calibrating delay using timer specific routine.. 4799.60 BogoMIPS (lpj=2399803) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 mce: CPU supports 6 MCE banks CPU2: Thermal monitoring enabled (TM1) CPU2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#2]: passed. Booting processor 3 APIC 0x2 ip 0x6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 4799.57 BogoMIPS (lpj=2399788) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 mce: CPU supports 6 MCE banks CPU3: Thermal monitoring enabled (TM1) CPU3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#3]: passed. Brought up 4 CPUs Total of 4 processors activated (19199.28 BogoMIPS). NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 31 PCI: MCFG area at f0000000 reserved in E820 PCI: Using MMCONFIG at f0000000 - f1ffffff PCI: Using configuration type 1 for base access mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:07.0: PME# disabled pci 0000:00:0a.1: reg 10 io port: [0xff00-0xff3f] pci 0000:00:0a.1: reg 20 io port: [0x1c00-0x1c3f] pci 0000:00:0a.1: reg 24 io port: [0x1c80-0x1cbf] pci 0000:00:0a.1: PME# supported from D3hot D3cold pci 0000:00:0a.1: PME# disabled pci 0000:00:0b.0: reg 10 32bit mmio: [0xeffff000-0xefffffff] pci 0000:00:0b.0: supports D1 D2 pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.0: PME# disabled pci 0000:00:0b.1: reg 10 32bit mmio: [0xefffe000-0xefffe0ff] pci 0000:00:0b.1: supports D1 D2 pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.1: PME# disabled pci 0000:00:0d.0: reg 20 io port: [0xfc00-0xfc0f] pci 0000:00:0e.0: reg 10 io port: [0x9f0-0x9f7] pci 0000:00:0e.0: reg 14 io port: [0xbf0-0xbf3] pci 0000:00:0e.0: reg 18 io port: [0x970-0x977] pci 0000:00:0e.0: reg 1c io port: [0xb70-0xb73] pci 0000:00:0e.0: reg 20 io port: [0xf700-0xf70f] pci 0000:00:0e.0: reg 24 32bit mmio: [0xefffd000-0xefffdfff] pci 0000:00:0e.1: reg 10 io port: [0x9e0-0x9e7] pci 0000:00:0e.1: reg 14 io port: [0xbe0-0xbe3] pci 0000:00:0e.1: reg 18 io port: [0x960-0x967] pci 0000:00:0e.1: reg 1c io port: [0xb60-0xb63] pci 0000:00:0e.1: reg 20 io port: [0xf200-0xf20f] pci 0000:00:0e.1: reg 24 32bit mmio: [0xefffc000-0xefffcfff] pci 0000:00:0e.2: reg 10 io port: [0xf100-0xf107] pci 0000:00:0e.2: reg 14 io port: [0xf000-0xf003] pci 0000:00:0e.2: reg 18 io port: [0xef00-0xef07] pci 0000:00:0e.2: reg 1c io port: [0xee00-0xee03] pci 0000:00:0e.2: reg 20 io port: [0xed00-0xed0f] pci 0000:00:0e.2: reg 24 32bit mmio: [0xefffb000-0xefffbfff] pci 0000:00:11.0: reg 10 32bit mmio: [0xefffa000-0xefffafff] pci 0000:00:11.0: reg 14 io port: [0xec00-0xec07] pci 0000:00:11.0: reg 18 32bit mmio: [0xefff9000-0xefff90ff] pci 0000:00:11.0: reg 1c 32bit mmio: [0xefff8000-0xefff800f] pci 0000:00:11.0: supports D1 D2 pci 0000:00:11.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:11.0: PME# disabled pci 0000:00:12.0: reg 10 32bit mmio: [0xefff7000-0xefff7fff] pci 0000:00:12.0: reg 14 io port: [0xeb00-0xeb07] pci 0000:00:12.0: reg 18 32bit mmio: [0xefff6000-0xefff60ff] pci 0000:00:12.0: reg 1c 32bit mmio: [0xefff5000-0xefff500f] pci 0000:00:12.0: supports D1 D2 pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:12.0: PME# disabled pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:13.0: PME# disabled pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:14.0: PME# disabled pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:15.0: PME# disabled pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:16.0: PME# disabled pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:17.0: PME# disabled pci 0000:00:18.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:18.0: PME# disabled pci 0000:01:00.0: reg 10 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:01:00.0: reg 18 64bit mmio: [0xefde0000-0xefdeffff] pci 0000:01:00.0: reg 20 io port: [0xde00-0xdeff] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xefdc0000-0xefddffff] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: reg 10 64bit mmio: [0xefdfc000-0xefdfffff] pci 0000:01:00.1: supports D1 D2 pci 0000:00:03.0: bridge io port: [0xd000-0xdfff] pci 0000:00:03.0: bridge 32bit mmio: [0xefd00000-0xefdfffff] pci 0000:00:03.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:00:06.0: bridge io port: [0xb000-0xbfff] pci 0000:00:06.0: bridge 32bit mmio: [0xefc00000-0xefcfffff] pci 0000:00:06.0: bridge 64bit mmio pref: [0xefb00000-0xefbfffff] pci 0000:00:07.0: bridge io port: [0xa000-0xafff] pci 0000:00:07.0: bridge 32bit mmio: [0xefa00000-0xefafffff] pci 0000:00:07.0: bridge 64bit mmio pref: [0xef900000-0xef9fffff] pci 0000:04:06.0: reg 10 io port: [0xcf00-0xcf1f] pci 0000:04:06.0: supports D1 D2 pci 0000:04:06.1: reg 10 io port: [0xce00-0xce07] pci 0000:04:06.1: supports D1 D2 pci 0000:04:06.2: reg 10 32bit mmio: [0xef8ff000-0xef8ff7ff] pci 0000:04:06.2: reg 14 32bit mmio: [0xef8f8000-0xef8fbfff] pci 0000:04:06.2: supports D1 D2 pci 0000:04:06.2: PME# supported from D0 D1 D2 D3hot pci 0000:04:06.2: PME# disabled pci 0000:04:07.0: reg 10 32bit mmio: [0xef8fe000-0xef8fe3ff] pci 0000:04:07.0: supports D1 D2 pci 0000:04:0b.0: reg 10 32bit mmio: [0xef8fd000-0xef8fd7ff] pci 0000:04:0b.0: reg 14 io port: [0xcd00-0xcd7f] pci 0000:04:0b.0: supports D2 pci 0000:04:0b.0: PME# supported from D2 D3hot D3cold pci 0000:04:0b.0: PME# disabled pci 0000:00:0f.0: transparent bridge pci 0000:00:0f.0: bridge io port: [0xc000-0xcfff] pci 0000:00:0f.0: bridge 32bit mmio: [0xef800000-0xef8fffff] pci 0000:00:0f.0: bridge 32bit mmio pref: [0xefe00000-0xefefffff] pci 0000:00:13.0: bridge io port: [0x9000-0x9fff] pci 0000:00:13.0: bridge 32bit mmio: [0xef700000-0xef7fffff] pci 0000:00:13.0: bridge 64bit mmio pref: [0xef600000-0xef6fffff] pci 0000:00:14.0: bridge io port: [0x8000-0x8fff] pci 0000:00:14.0: bridge 32bit mmio: [0xef500000-0xef5fffff] pci 0000:00:14.0: bridge 64bit mmio pref: [0xef400000-0xef4fffff] pci 0000:00:15.0: bridge io port: [0x7000-0x7fff] pci 0000:00:15.0: bridge 32bit mmio: [0xef300000-0xef3fffff] pci 0000:00:15.0: bridge 64bit mmio pref: [0xef200000-0xef2fffff] pci 0000:08:00.0: reg 10 64bit mmio: [0xef1ff000-0xef1ff07f] pci 0000:08:00.0: reg 18 64bit mmio: [0xef1f8000-0xef1fbfff] pci 0000:08:00.0: reg 20 io port: [0x6f00-0x6f7f] pci 0000:08:00.0: reg 30 32bit mmio pref: [0xef100000-0xef17ffff] pci 0000:08:00.0: supports D1 D2 pci 0000:00:16.0: bridge io port: [0x6000-0x6fff] pci 0000:00:16.0: bridge 32bit mmio: [0xef100000-0xef1fffff] pci 0000:00:16.0: bridge 64bit mmio pref: [0xef000000-0xef0fffff] pci 0000:00:17.0: bridge io port: [0x5000-0x5fff] pci 0000:00:17.0: bridge 32bit mmio: [0xeef00000-0xeeffffff] pci 0000:00:17.0: bridge 64bit mmio pref: [0xeee00000-0xeeefffff] pci 0000:00:18.0: bridge io port: [0x4000-0x4fff] pci 0000:00:18.0: bridge 32bit mmio: [0xeed00000-0xeedfffff] pci 0000:00:18.0: bridge 64bit mmio pref: [0xeec00000-0xeecfffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs 5 *7 9 10 11 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LNK7] (IRQs 5 *7 9 10 11 14 15) ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 5 *7 9 10 11 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0 ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0 ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0 ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0 vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 hpet0: 3 comparators, 32-bit 25.000000 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered system 00:01: ioport range 0x1000-0x107f has been reserved system 00:01: ioport range 0x1080-0x10ff has been reserved system 00:01: ioport range 0x1400-0x147f has been reserved system 00:01: ioport range 0x1480-0x14ff has been reserved system 00:01: ioport range 0x1800-0x187f has been reserved system 00:01: ioport range 0x1880-0x18ff has been reserved system 00:02: ioport range 0x4d0-0x4d1 has been reserved system 00:02: ioport range 0x800-0x87f has been reserved system 00:02: ioport range 0x290-0x297 has been reserved system 00:02: ioport range 0x880-0x88f has been reserved system 00:09: iomem range 0xf0000000-0xf1ffffff has been reserved system 00:0a: iomem range 0xd0000-0xd3fff has been reserved system 00:0a: iomem range 0xf0000-0xf7fff could not be reserved system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved system 00:0a: iomem range 0xfc000-0xfffff could not be reserved system 00:0a: iomem range 0xfeff0000-0xfeff00ff has been reserved system 00:0a: iomem range 0xcfef0000-0xcfefffff could not be reserved system 00:0a: iomem range 0xffff0000-0xffffffff has been reserved system 00:0a: iomem range 0x0-0x9ffff could not be reserved system 00:0a: iomem range 0x100000-0xcfeeffff could not be reserved system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0a: iomem range 0xfeff0000-0xfeff03ff could not be reserved pci 0000:00:03.0: PCI bridge, secondary bus 0000:01 pci 0000:00:03.0: IO window: 0xd000-0xdfff pci 0000:00:03.0: MEM window: 0xefd00000-0xefdfffff pci 0000:00:03.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff pci 0000:00:06.0: PCI bridge, secondary bus 0000:02 pci 0000:00:06.0: IO window: disabled pci 0000:00:06.0: MEM window: disabled pci 0000:00:06.0: PREFETCH window: disabled pci 0000:00:07.0: PCI bridge, secondary bus 0000:03 pci 0000:00:07.0: IO window: disabled pci 0000:00:07.0: MEM window: disabled pci 0000:00:07.0: PREFETCH window: disabled pci 0000:00:0f.0: PCI bridge, secondary bus 0000:04 pci 0000:00:0f.0: IO window: 0xc000-0xcfff pci 0000:00:0f.0: MEM window: 0xef800000-0xef8fffff pci 0000:00:0f.0: PREFETCH window: disabled pci 0000:00:13.0: PCI bridge, secondary bus 0000:05 pci 0000:00:13.0: IO window: disabled pci 0000:00:13.0: MEM window: disabled pci 0000:00:13.0: PREFETCH window: disabled pci 0000:00:14.0: PCI bridge, secondary bus 0000:06 pci 0000:00:14.0: IO window: disabled pci 0000:00:14.0: MEM window: disabled pci 0000:00:14.0: PREFETCH window: disabled pci 0000:00:15.0: PCI bridge, secondary bus 0000:07 pci 0000:00:15.0: IO window: disabled pci 0000:00:15.0: MEM window: disabled pci 0000:00:15.0: PREFETCH window: disabled pci 0000:00:16.0: PCI bridge, secondary bus 0000:08 pci 0000:00:16.0: IO window: 0x6000-0x6fff pci 0000:00:16.0: MEM window: 0xef100000-0xef1fffff pci 0000:00:16.0: PREFETCH window: disabled pci 0000:00:17.0: PCI bridge, secondary bus 0000:09 pci 0000:00:17.0: IO window: disabled pci 0000:00:17.0: MEM window: disabled pci 0000:00:17.0: PREFETCH window: disabled pci 0000:00:18.0: PCI bridge, secondary bus 0000:0a pci 0000:00:18.0: IO window: disabled pci 0000:00:18.0: MEM window: disabled pci 0000:00:18.0: PREFETCH window: disabled pci 0000:00:03.0: setting latency timer to 64 pci 0000:00:06.0: setting latency timer to 64 pci 0000:00:07.0: setting latency timer to 64 pci 0000:00:0f.0: setting latency timer to 64 pci 0000:00:13.0: setting latency timer to 64 pci 0000:00:14.0: setting latency timer to 64 pci 0000:00:15.0: setting latency timer to 64 pci 0000:00:16.0: setting latency timer to 64 pci 0000:00:17.0: setting latency timer to 64 pci 0000:00:18.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] pci_bus 0000:01: resource 1 mem: [0xefd00000-0xefdfffff] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] pci_bus 0000:02: resource 0 mem: [0xb000-0xbfff] pci_bus 0000:02: resource 1 mem: [0xefc00000-0xefcfffff] pci_bus 0000:02: resource 2 mem: [0xefb00000-0xefbfffff] pci_bus 0000:03: resource 0 mem: [0xa000-0xafff] pci_bus 0000:03: resource 1 mem: [0xefa00000-0xefafffff] pci_bus 0000:03: resource 2 mem: [0xef900000-0xef9fffff] pci_bus 0000:04: resource 0 io: [0xc000-0xcfff] pci_bus 0000:04: resource 1 mem: [0xef800000-0xef8fffff] pci_bus 0000:04: resource 2 mem: [0xefe00000-0xefefffff] pci_bus 0000:04: resource 3 io: [0x00-0xffff] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:05: resource 0 mem: [0x9000-0x9fff] pci_bus 0000:05: resource 1 mem: [0xef700000-0xef7fffff] pci_bus 0000:05: resource 2 mem: [0xef600000-0xef6fffff] pci_bus 0000:06: resource 0 mem: [0x8000-0x8fff] pci_bus 0000:06: resource 1 mem: [0xef500000-0xef5fffff] pci_bus 0000:06: resource 2 mem: [0xef400000-0xef4fffff] pci_bus 0000:07: resource 0 mem: [0x7000-0x7fff] pci_bus 0000:07: resource 1 mem: [0xef300000-0xef3fffff] pci_bus 0000:07: resource 2 mem: [0xef200000-0xef2fffff] pci_bus 0000:08: resource 0 io: [0x6000-0x6fff] pci_bus 0000:08: resource 1 mem: [0xef100000-0xef1fffff] pci_bus 0000:08: resource 2 mem: [0xef000000-0xef0fffff] pci_bus 0000:09: resource 0 mem: [0x5000-0x5fff] pci_bus 0000:09: resource 1 mem: [0xeef00000-0xeeffffff] pci_bus 0000:09: resource 2 mem: [0xeee00000-0xeeefffff] pci_bus 0000:0a: resource 0 mem: [0x4000-0x4fff] pci_bus 0000:0a: resource 1 mem: [0xeed00000-0xeedfffff] pci_bus 0000:0a: resource 2 mem: [0xeec00000-0xeecfffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 3, 32768 bytes) UDP-Lite hash table entries: 2048 (order: 3, 32768 bytes) NET: Registered protocol family 1 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 633k freed microcode: CPU0 sig=0x6fb, pf=0x10, revision=0xb3 microcode: CPU1 sig=0x6fb, pf=0x10, revision=0xb3 microcode: CPU2 sig=0x6fb, pf=0x10, revision=0xb3 microcode: CPU3 sig=0x6fb, pf=0x10, revision=0xb3 Microcode Update Driver: v2.00 , Peter Oruba msgmni has been set to 7917 alg: No test for stdrng (krng) io scheduler noop registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device PCI: CLS 32 bytes, default 32 pcieport 0000:00:03.0: irq 24 for MSI/MSI-X pcieport 0000:00:03.0: setting latency timer to 64 pcieport 0000:00:06.0: irq 25 for MSI/MSI-X pcieport 0000:00:06.0: setting latency timer to 64 pcieport 0000:00:07.0: irq 26 for MSI/MSI-X pcieport 0000:00:07.0: setting latency timer to 64 pcieport 0000:00:13.0: irq 27 for MSI/MSI-X pcieport 0000:00:13.0: setting latency timer to 64 pcieport 0000:00:14.0: irq 28 for MSI/MSI-X pcieport 0000:00:14.0: setting latency timer to 64 pcieport 0000:00:15.0: irq 29 for MSI/MSI-X pcieport 0000:00:15.0: setting latency timer to 64 pcieport 0000:00:16.0: irq 30 for MSI/MSI-X pcieport 0000:00:16.0: setting latency timer to 64 pcieport 0000:00:17.0: irq 31 for MSI/MSI-X pcieport 0000:00:17.0: setting latency timer to 64 pcieport 0000:00:18.0: irq 32 for MSI/MSI-X pcieport 0000:00:18.0: setting latency timer to 64 input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] fan PNP0C0B:00: registered as cooling_device0 ACPI: Fan [FAN] (on) ACPI: SSDT 00000000cfefbac0 00175 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) processor LNXCPU:00: registered as cooling_device1 ACPI: SSDT 00000000cfefbed0 000CE (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) processor LNXCPU:01: registered as cooling_device2 ACPI: SSDT 00000000cfefbfa0 000CE (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) processor LNXCPU:02: registered as cooling_device3 ACPI: SSDT 00000000cfefc070 000CE (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) processor LNXCPU:03: registered as cooling_device4 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (40 C) [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16 radeon 0000:01:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16 radeon 0000:01:00.0: setting latency timer to 64 [drm] radeon: Initializing kernel modesetting. [drm] register mmio base: 0xEFDE0000 [drm] register mmio size: 65536 ATOM BIOS: [drm] Clocks initialized ! [drm] Detected VRAM RAM=256M, BAR=256M [drm] RAM width 128bits DDR [TTM] Zone kernel: Available graphics memory: 2026754 kiB. [drm] radeon: 256M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] Loading RV730 CP Microcode platform radeon_cp.0: firmware: using built-in firmware radeon/RV730_pfp.bin platform radeon_cp.0: firmware: using built-in firmware radeon/RV730_me.bin [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] ring test succeeded in 1 usecs [drm] radeon: ib pool ready. [drm] ib test succeeded in 0 usecs [drm] Radeon Display Connectors [drm] Connector 0: [drm] DVI-I [drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c [drm] Encoders: [drm] CRT2: INTERNAL_KLDSCP_DAC2 [drm] DFP2: INTERNAL_UNIPHY1 [drm] Connector 1: [drm] DIN [drm] Encoders: [drm] TV1: INTERNAL_KLDSCP_DAC2 [drm] Connector 2: [drm] DVI-I [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c [drm] Encoders: [drm] CRT1: INTERNAL_KLDSCP_DAC1 [drm] DFP1: INTERNAL_UNIPHY [drm] fb mappable at 0xD0141000 [drm] vram apper at 0xD0000000 [drm] size 8294400 [drm] fb depth is 24 [drm] pitch is 7680 executing set pll executing set crtc timing [drm] TMDS-11: set mode 1280x1024 24 executing set pll executing set crtc timing [drm] TMDS-15: set mode 1920x1080 30 Console: switching to colour frame buffer device 160x64 fb0: radeondrmfb frame buffer device registered panic notifier [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0 brd: module loaded Uniform Multi-Platform E-IDE driver amd74xx 0000:00:0d.0: UDMA133 controller amd74xx 0000:00:0d.0: IDE controller (0x10de:0x036e rev 0xa1) amd74xx 0000:00:0d.0: IDE port disabled amd74xx 0000:00:0d.0: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfc00-0xfc07 Probing IDE interface ide0... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide-gd driver 1.18 sata_sil24 0000:08:00.0: version 1.1 ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16 sata_sil24 0000:08:00.0: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16 sata_sil24 0000:08:00.0: setting latency timer to 64 scsi0 : sata_sil24 scsi1 : sata_sil24 ata1: SATA max UDMA/100 host m128@0xef1ff000 port 0xef1f8000 irq 16 ata2: SATA max UDMA/100 host m128@0xef1ff000 port 0xef1fa000 irq 16 sata_nv 0000:00:0e.0: version 3.5 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 sata_nv 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 sata_nv 0000:00:0e.0: Using SWNCQ mode sata_nv 0000:00:0e.0: setting latency timer to 64 scsi2 : sata_nv scsi3 : sata_nv ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xf700 irq 23 ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xf708 irq 23 ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 sata_nv 0000:00:0e.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 sata_nv 0000:00:0e.1: Using SWNCQ mode sata_nv 0000:00:0e.1: setting latency timer to 64 scsi4 : sata_nv scsi5 : sata_nv ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xf200 irq 22 ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xf208 irq 22 ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21 sata_nv 0000:00:0e.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21 sata_nv 0000:00:0e.2: Using SWNCQ mode sata_nv 0000:00:0e.2: setting latency timer to 64 scsi6 : sata_nv scsi7 : sata_nv ata5: SATA link down (SStatus 0 SControl 300) ata7: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xed00 irq 21 ata8: SATA max UDMA/133 cmd 0xef00 ctl 0xee00 bmdma 0xed08 irq 21 forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20 forcedeth 0000:00:11.0: PCI INT A -> Link[APCH] -> GSI 20 (level, low) -> IRQ 20 forcedeth 0000:00:11.0: setting latency timer to 64 nv_probe: set workaround bit for reversed mac addr ata7: SATA link down (SStatus 0 SControl 300) ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: ATA-7: WDC WD400BD-75LRA0, 09.01D09, max UDMA/133 ata3.00: 78125000 sectors, multi 1: LBA48 ata3.00: configured for UDMA/133 forcedeth 0000:00:11.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1b:fc:d2:69:13 forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3 ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 23 forcedeth 0000:00:12.0: PCI INT A -> Link[AMC1] -> GSI 23 (level, low) -> IRQ 23 forcedeth 0000:00:12.0: setting latency timer to 64 nv_probe: set workaround bit for reversed mac addr forcedeth 0000:00:12.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:1b:fc:d2:69:a1 forcedeth 0000:00:12.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 ehci_hcd 0000:00:0b.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22 ehci_hcd 0000:00:0b.1: setting latency timer to 64 ehci_hcd 0000:00:0b.1: EHCI Host Controller ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0b.1: debug port 1 ehci_hcd 0000:00:0b.1: cache line size of 32 is not supported ehci_hcd 0000:00:0b.1: irq 22, io mem 0xefffe000 ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 ohci_hcd 0000:00:0b.0: PCI INT A -> Link[APCF] -> GSI 21 (level, low) -> IRQ 21 ohci_hcd 0000:00:0b.0: setting latency timer to 64 ohci_hcd 0000:00:0b.0: OHCI Host Controller ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:0b.0: irq 21, io mem 0xeffff000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected usbcore: registered new interface driver libusual PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: PC Speaker as /devices/platform/pcspkr/input/input2 Driver 'rtc_cmos' needs updating - please use bus_type methods rtc_cmos 00:05: RTC can wake from S4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs i2c /dev entries driver i2c i2c-2: nForce2 SMBus adapter at 0x1c00 ACPI: I/O resource nForce2_smbus [0x1c80-0x1cbf] conflicts with ACPI region SM00 [0x1c80-0x1c85] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver nForce2_smbus 0000:00:0a.1: Error probing SMB2. coretemp coretemp.0: Using relative temperature scale! coretemp coretemp.1: Using relative temperature scale! coretemp coretemp.2: Using relative temperature scale! coretemp coretemp.3: Using relative temperature scale! it87: Found IT8718F chip at 0x290, revision 2 it87: in3 is VCC (+5V) it87: in7 is VCCH (+5V Stand-By) ACPI: I/O resource it87 [0x295-0x296] conflicts with ACPI region HWRE [0x295-0x296] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 NET: Registered protocol family 15 Bridge firewalling registered rtc_cmos 00:05: setting system clock to 2009-10-13 23:36:40 UTC (1255477000) gameport: EMU10K1 is pci0000:04:06.1/gameport0, io 0xce00, speed 1197kHz usb 1-1: new high speed USB device using ehci_hcd and address 2 usb 2-4: new full speed USB device using ohci_hcd and address 2 ata1: SATA link down (SStatus 0 SControl 0) usb 2-7: new low speed USB device using ohci_hcd and address 3 usb 2-7: device descriptor read/64, error -62 usb 2-8: new low speed USB device using ohci_hcd and address 4 ata2: SATA link down (SStatus 0 SControl 0) scsi 2:0:0:0: Direct-Access ATA WDC WD400BD-75LR 09.0 PQ: 0 ANSI: 5 sd 2:0:0:0: [sda] 78125000 512-byte logical blocks: (40.0 GB/37.2 GiB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: Attached scsi generic sg0 type 0 sda: sda1 sd 2:0:0:0: [sda] Attached SCSI disk ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7 ata4.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32) ata4.00: configured for UDMA/133 scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5 sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: Attached scsi generic sg1 type 0 sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 > sd 3:0:0:0: [sdb] Attached SCSI disk ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata6.00: ATAPI: Optiarc DVD RW AD-7173S, 1-00, max UDMA/66 ata6.00: configured for UDMA/66 scsi 5:0:0:0: CD-ROM Optiarc DVD RW AD-7173S 1-00 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 5:0:0:0: Attached scsi CD-ROM sr0 sr 5:0:0:0: Attached scsi generic sg2 type 5 ata8: SATA link down (SStatus 0 SControl 300) EXT4-fs (sdb6): mounted filesystem with ordered data mode VFS: Mounted root (ext4 filesystem) readonly on device 8:22. Freeing unused kernel memory: 536k freed udev: starting version 146 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 usbcore: registered new interface driver hiddev input: USB OpticalWheel Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-7/2-7:1.0/input/input3 generic-usb 0003:04FC:0003.0001: input: USB HID v1.10 Mouse [USB OpticalWheel Mouse] on usb-0000:00:0b.0-7/input0 pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver usbcore: registered new interface driver pegasus input: USB Keyboard as /devices/pci0000:00/0000:00:0b.0/usb2/2-8/2-8:1.0/input/input4 generic-usb 0003:1241:1503.0002: input: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:0b.0-8/input0 cfg80211: Using static regulatory domain info cfg80211: Regulatory domain: US (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) cfg80211: Calling CRDA for country: US input: USB Keyboard as /devices/pci0000:00/0000:00:0b.0/usb2/2-8/2-8:1.1/input/input5 generic-usb 0003:1241:1503.0003: input: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:0b.0-8/input1 usbcore: registered new interface driver usbhid usbhid: USB HID core driver Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: Generic Bluetooth USB driver ver 0.6 usbcore: registered new interface driver btusb Linux video capture interface: v2.00 ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 EMU10K1_Audigy 0000:04:06.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16 saa7130/34: v4l2 driver version 0.2.15 loaded ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 saa7134 0000:04:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17 saa7134[0]: found at 0000:04:07.0, rev: 1, irq: 17, latency: 32, mmio: 0xef8fe000 saa7134[0]: subsystem: 5168:0300, board: LifeView FlyDVB-S /Acorp TV134DS [card=97,autodetected] saa7134[0]: board init: gpio is 10000 input: saa7134 IR (LifeView FlyDVB-S / as /devices/pci0000:00/0000:00:0f.0/0000:04:07.0/input/input6 IRQ 17/saa7134[0]: IRQF_DISABLED is not guaranteed on shared IRQs usb 1-1: reset high speed USB device using ehci_hcd and address 2 saa7134[0]: i2c eeprom 00: 68 51 00 03 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 saa7134[0]: i2c eeprom 10: 20 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 20: 01 40 01 03 03 ff 01 03 08 ff 01 28 ff ff ff ff saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 40: ff 1d 00 c0 ff 1c 01 f0 ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom f0: 00 0c 45 00 29 3a ff ff ff ff ff ff ff ff ff ff i2c i2c-3: Invalid 7-bit address 0x7a saa7134[0]: registered device video0 [v4l2] saa7134[0]: registered device vbi0 usb 1-1: firmware: requesting isl3887usb dvb_init() allocating 1 frontend DVB: registering new adapter (saa7134[0]) DVB: registering adapter 0 frontend 0 (Philips TDA10086 DVB-S)... phy0: p54 detected a LM87 firmware p54: rx_mtu reduced from 3240 to 2384 phy0: FW rev 2.13.24.0 - Softmac protocol 5.9 phy0: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:YES saa7134 ALSA driver for DMA sound loaded IRQ 17/saa7134[0]: IRQF_DISABLED is not guaranteed on shared IRQs saa7134[0]/alsa: saa7134[0] at 0xef8fe000 irq 17 registered as card -1 phy0: hwaddr 00:0f:b5:72:06:b6, MAC:isl3887 RF:Frisbee phy0: Selected rate control algorithm 'minstrel' Registered led device: p54-phy0::assoc Registered led device: p54-phy0::tx Registered led device: p54-phy0::rx Registered led device: p54-phy0::radio usb 1-1: is registered as 'phy0' usbcore: registered new interface driver p54usb loop: module loaded PPP generic driver version 2.4.2 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com EXT4-fs (dm-1): barriers disabled EXT4-fs (dm-1): mounted filesystem with ordered data mode EXT4-fs (dm-3): barriers disabled EXT4-fs (dm-3): mounted filesystem with ordered data mode EXT4-fs (dm-2): barriers disabled EXT4-fs (dm-2): mounted filesystem with ordered data mode EXT4-fs (dm-5): barriers disabled EXT4-fs (dm-5): mounted filesystem with writeback data mode Adding 5242872k swap on /dev/mapper/symphony-swap. Priority:-1 extents:1 across:5242872k microcode: CPU0 updated to revision 0xb6, date = 2007-07-13 microcode: CPU1 updated to revision 0xb6, date = 2007-07-13 microcode: CPU2 updated to revision 0xb6, date = 2007-07-13 microcode: CPU3 updated to revision 0xb6, date = 2007-07-13 forcedeth 0000:00:11.0: irq 33 for MSI/MSI-X forcedeth 0000:00:12.0: irq 34 for MSI/MSI-X tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky fuse init (API version 7.13) device eth1 entered promiscuous mode device qemu entered promiscuous mode device wlan0 entered promiscuous mode br0: port 2(qemu) entering learning state br0: port 1(eth1) entering learning state br0: port 3(wlan0) entering disabled state br0: port 3(wlan0) entering learning state cfg80211: Calling CRDA for country: GB RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Installing knfsd (copyright (C) 1996 okir@monad.swb.de). ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) br0: port 2(qemu) entering forwarding state br0: port 1(eth1) entering forwarding state br0: port 3(wlan0) entering forwarding state usb 2-4: USB disconnect, address 2 usb 2-4: new full speed USB device using ohci_hcd and address 5 Bluetooth: L2CAP ver 2.14 Bluetooth: L2CAP socket layer initialized Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 input: Nintendo Wiimote as /devices/virtual/input/input7 executing set pll executing set crtc timing [drm] TMDS-11: set mode 32 xfce4-panel[25842]: segfault at 0 ip 00007fcd93b2ed98 sp 00007fffd9fb99c0 error 4 in libgdk-x11-2.0.so.0.1600.6[7fcd93ada000+94000] executing set pll executing set crtc timing [drm] TMDS-11: set mode 35 input: Nintendo Wiimote as /devices/virtual/input/input8 executing set pll executing set crtc timing [drm] TMDS-15: set mode 1920x1080 30 Intel AES-NI instructions are not detected. Unpin not necessary for ffff880115264800 ! executing set pll executing set crtc timing [drm] TMDS-11: set mode 36 xfce4-panel[26245]: segfault at 0 ip 00007fe9018bbd98 sp 00007fffd138e950 error 4 in libgdk-x11-2.0.so.0.1600.6[7fe901867000+94000] Unpin not necessary for ffff88010cad5c00 ! executing set pll executing set crtc timing [drm] TMDS-15: set mode 39 Unpin not necessary for ffff8801215d8400 !