Linux version 2.6.31-ARCH (root@architect) (gcc version 4.4.1 (GCC) ) #1 SMP PREEMPT Fri Oct 23 11:12:58 CEST 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000005ff30000 (usable) BIOS-e820: 000000005ff30000 - 000000005ff40000 (ACPI data) BIOS-e820: 000000005ff40000 - 000000005fff0000 (ACPI NVS) BIOS-e820: 000000005fff0000 - 0000000060000000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) DMI 2.3 present. AMI BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0x5ff30 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0000000000 mask FFC0000000 write-back 1 base 00F0000000 mask FFF8000000 write-combining 2 base 0040000000 mask FFE0000000 write-back 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Scanning 0 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000010000 (reserved) modified: 0000000000010000 - 000000000009fc00 (usable) modified: 000000000009fc00 - 00000000000a0000 (reserved) modified: 00000000000e4000 - 0000000000100000 (reserved) modified: 0000000000100000 - 000000005ff30000 (usable) modified: 000000005ff30000 - 000000005ff40000 (ACPI data) modified: 000000005ff40000 - 000000005fff0000 (ACPI NVS) modified: 000000005fff0000 - 0000000060000000 (reserved) modified: 00000000fff80000 - 0000000100000000 (reserved) initial memory mapped : 0 - 01800000 init_memory_mapping: 0000000000000000-00000000377fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037400000 page 2M 0037400000 - 00377fe000 page 4k kernel direct mapping tables up to 377fe000 @ 10000-15000 RAMDISK: 5fdf7000 - 5ff1fbf1 Allocated new RAMDISK: 00100000 - 00228bf1 Move RAMDISK from 000000005fdf7000 - 000000005ff1fbf0 to 00100000 - 00228bf0 ACPI: RSDP 000faac0 00014 (v00 ACPIAM) ACPI: RSDT 5ff30000 00030 (v01 A M I OEMRSDT 01000428 MSFT 00000097) ACPI: FACP 5ff30200 00081 (v01 A M I OEMFACP 01000428 MSFT 00000097) ACPI: DSDT 5ff303e0 035C1 (v01 A0043 A0043006 00000006 MSFT 0100000D) ACPI: FACS 5ff40000 00040 ACPI: APIC 5ff30390 0004A (v01 A M I OEMAPIC 01000428 MSFT 00000097) ACPI: OEMB 5ff40040 0003F (v01 A M I OEMBIOS 01000428 MSFT 00000097) ACPI: Local APIC address 0xfee00000 647MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 node 0 low ram: 00000000 - 377fe000 node 0 bootmap 00011000 - 00017f00 (9 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0001000000 - 000156da44] TEXT DATA BSS ==> [0001000000 - 000156da44] #4 [000009d800 - 0000100000] BIOS reserved ==> [000009d800 - 0000100000] #5 [000156e000 - 000157421c] BRK ==> [000156e000 - 000157421c] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] #7 [0000100000 - 0000228bf1] NEW RAMDISK ==> [0000100000 - 0000228bf1] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] found SMP MP-table at [c00ff780] ff780 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x0005ff30 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0005ff30 On node 0 totalpages: 392895 free_area_init_node: node 0, pgdat c141b720, node_mem_map c1575200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3951 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 1295 pages used for memmap HighMem zone: 164387 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information SMP: Allowing 1 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 Allocating PCI resources starting at 60000000 (gap: 60000000:9ff80000) NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 PERCPU: Embedded 14 pages at c217c000, static data 34332 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 389824 Kernel command line: root=/dev/disk/by-uuid/1a779746-237d-4a45-a208-c3247078a152 ro radeon.agpmode=-1 Unknown boot option `radeon.agpmode=-1': ignoring PID hash table entries: 4096 (order: 12, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Initializing HighMem for node 0 (000377fe:0005ff30) Memory: 1550732k/1572032k available (3110k kernel code, 19968k reserved, 1121k data, 416k init, 662728k highmem) virtual kernel memory layout: fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc1422000 - 0xc148a000 ( 416 kB) .data : 0xc1309a2d - 0xc1421e68 (1121 kB) .text : 0xc1000000 - 0xc1309a2d (3110 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 NR_IRQS:512 Fast TSC calibration using PIT Detected 2002.526 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Calibrating delay loop (skipped), value calculated using timer frequency.. 4006.92 BogoMIPS (lpj=6675086) Security Framework initialized Mount-cache hash table entries: 512 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) mce: CPU supports 5 MCE banks Performance Counters: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic counters: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose counters: 0 ... counter mask: 000000000000000f Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 11k freed ACPI: Core revision 20090521 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 00 Brought up 1 CPUs Total of 1 processors activated (4006.92 BogoMIPS). CPU0 attaching NULL sched-domain. Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff] pci 0000:00:01.0: supports D1 pci 0000:00:08.0: reg 10 io port: [0xcc00-0xcc3f] pci 0000:00:08.0: reg 14 io port: [0xbc00-0xbc0f] pci 0000:00:08.0: reg 18 io port: [0xac00-0xac7f] pci 0000:00:08.0: reg 1c 32bit mmio: [0xfda00000-0xfda00fff] pci 0000:00:08.0: reg 20 32bit mmio: [0xfd900000-0xfd91ffff] pci 0000:00:08.0: supports D1 pci 0000:00:0a.0: reg 10 32bit mmio: [0xfdc00000-0xfdc03fff] pci 0000:00:0a.0: reg 14 io port: [0xdc00-0xdcff] pci 0000:00:0a.0: reg 30 32bit mmio: [0xfdb00000-0xfdb1ffff] pci 0000:00:0a.0: supports D1 D2 pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:0e.0: reg 10 io port: [0xb000-0xb007] pci 0000:00:0e.0: reg 14 io port: [0xa800-0xa803] pci 0000:00:0e.0: reg 18 io port: [0xa400-0xa407] pci 0000:00:0e.0: reg 1c io port: [0xa000-0xa003] pci 0000:00:0e.0: reg 20 io port: [0xec00-0xec0f] pci 0000:00:0e.0: reg 24 32bit mmio: [0xfde00000-0xfde003ff] pci 0000:00:0e.0: reg 30 32bit mmio: [0xfdd00000-0xfdd7ffff] pci 0000:00:0e.0: supports D1 D2 pci 0000:00:0f.0: reg 10 io port: [0xe800-0xe807] pci 0000:00:0f.0: reg 14 io port: [0xe400-0xe403] pci 0000:00:0f.0: reg 18 io port: [0xe000-0xe007] pci 0000:00:0f.0: reg 1c io port: [0xd800-0xd803] pci 0000:00:0f.0: reg 20 io port: [0xd400-0xd40f] pci 0000:00:0f.0: reg 24 io port: [0xd000-0xd0ff] pci 0000:00:0f.1: reg 20 io port: [0xfc00-0xfc0f] pci 0000:00:10.0: reg 20 io port: [0xb400-0xb41f] pci 0000:00:10.0: supports D1 D2 pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.0: PME# disabled pci 0000:00:10.1: reg 20 io port: [0xb800-0xb81f] pci 0000:00:10.1: supports D1 D2 pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.1: PME# disabled pci 0000:00:10.2: reg 20 io port: [0xc000-0xc01f] pci 0000:00:10.2: supports D1 D2 pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.2: PME# disabled pci 0000:00:10.3: reg 20 io port: [0xc400-0xc41f] pci 0000:00:10.3: supports D1 D2 pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.3: PME# disabled pci 0000:00:10.4: reg 10 32bit mmio: [0xfdf00000-0xfdf000ff] pci 0000:00:10.4: supports D1 D2 pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.4: PME# disabled HPET not enabled in BIOS. You might try hpet=force boot option pci 0000:00:11.0: Enabled onboard AC97/MC97 devices pci 0000:00:11.5: reg 10 io port: [0xc800-0xc8ff] pci 0000:00:11.5: supports D1 D2 pci 0000:00:11.6: reg 10 io port: [0x00-0xff] pci 0000:01:00.0: reg 10 32bit mmio: [0xe0000000-0xe7ffffff] pci 0000:01:00.0: reg 14 io port: [0x9000-0x90ff] pci 0000:01:00.0: reg 18 32bit mmio: [0xfd000000-0xfd00ffff] pci 0000:01:00.0: reg 30 32bit mmio: [0xfcf00000-0xfcf1ffff] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: reg 10 32bit mmio: [0xd8000000-0xdfffffff] pci 0000:01:00.1: reg 14 32bit mmio: [0xfce00000-0xfce0ffff] pci 0000:01:00.1: supports D1 D2 pci 0000:00:01.0: bridge io port: [0x9000-0x9fff] pci 0000:00:01.0: bridge 32bit mmio: [0xfcb00000-0xfd0fffff] pci 0000:00:01.0: bridge 32bit mmio pref: [0xcff00000-0xefefffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:09: io resource (0x10-0x1f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:09: io resource (0x22-0x3f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:09: io resource (0x44-0x5f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:09: io resource (0x62-0x63) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:09: io resource (0x65-0x6f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:09: io resource (0x72-0x7f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:09: io resource (0x80-0x80) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:09: io resource (0x84-0x86) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:09: io resource (0x88-0x88) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:09: io resource (0x8c-0x8e) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:09: io resource (0x90-0x9f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:09: io resource (0xa2-0xbf) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:09: io resource (0xe0-0xef) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered system 00:09: ioport range 0x295-0x296 has been reserved system 00:09: ioport range 0x3e1-0x3e7 has been reserved system 00:09: ioport range 0x4d0-0x4d1 has been reserved system 00:09: ioport range 0x800-0x87f has been reserved system 00:09: ioport range 0x400-0x41f has been reserved system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0a: iomem range 0xfff80000-0xffffffff has been reserved system 00:0c: iomem range 0x0-0x9ffff could not be reserved system 00:0c: iomem range 0xc0000-0xdffff could not be reserved system 00:0c: iomem range 0xe0000-0xfffff could not be reserved system 00:0c: iomem range 0x100000-0x5ffeffff could not be reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x9000-0x9fff pci 0000:00:01.0: MEM window: 0xfcb00000-0xfd0fffff pci 0000:00:01.0: PREFETCH window: 0xcff00000-0xefefffff pci 0000:00:01.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff] pci_bus 0000:01: resource 1 mem: [0xfcb00000-0xfd0fffff] pci_bus 0000:01: resource 2 pref mem [0xcff00000-0xefefffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... Freeing initrd memory: 1186k freed apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. Scanning for low memory corruption every 60 seconds audit: initializing netlink socket (disabled) type=2000 audit(1256395887.166:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1738 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:01.0: disabling DAC on VIA PCI bridge pci 0000:01:00.0: Boot video device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A input: Macintosh mouse button emulation as /devices/virtual/input/input0 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 Initalizing network drop monitor service Freeing unused kernel memory: 416k freed Linux agpgart interface v0.103 agpgart-amd64 0000:00:00.0: AGP bridge [1106/3188] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xf0000000 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [drm] Initialized drm 1.1.0 20060810 [drm] radeon default to kernel modesetting. [drm] radeon kernel modesetting enabled. radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [drm] radeon: Initializing kernel modesetting. [drm] Forcing AGP to PCI mode [drm] register mmio base: 0xFD000000 [drm] register mmio size: 65536 [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [drm] Clocks initialized ! [drm] Generation 1 PCI interface in multifunction mode [drm] Limiting VRAM to one aperture [drm] Detected VRAM RAM=128M, BAR=128M [drm] RAM width 128bits DDR [drm] radeon: 2 quad pipes, 1 Z pipes initialized. [drm] radeon: VRAM 128M [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF [drm] radeon: GTT 512M [drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF [drm] radeon: irq initialized. [TTM] TTM available graphics memory: 758 MiB [TTM] TTM available object memory: 434 MiB [drm] radeon: 128M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] radeon: cp idle (0x10000C00) [drm] Loading R300 Microcode [drm] radeon: ring at 0x0000000020000000 [drm] ring test succeeded in 3 usecs [drm] radeon: ib pool ready. [drm] ib test succeeded in 0 usecs [drm] Default TV standard: NTSC [drm] 27.000000000 MHz TV ref clk [drm] DFP table revision: 4 [drm] Radeon Display Connectors [drm] Connector 0: [drm] VGA [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [drm] Encoders: [drm] CRT1: INTERNAL_DAC1 [drm] Connector 1: [drm] DVI-I [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [drm] Encoders: [drm] CRT2: INTERNAL_DAC2 [drm] DFP1: INTERNAL_TMDS1 i2c-adapter i2c-0: unable to read EDID block. radeon 0000:01:00.0: VGA-1: no EDID data Switched to high resolution mode on CPU 0 [drm] fb mappable at 0xE0040000 [drm] vram apper at 0xE0000000 [drm] size 8294400 [drm] fb depth is 24 [drm] pitch is 7680 [drm] TMDS-8: set mode 1920x1080 10 Console: switching to colour frame buffer device 240x67 fb0: radeondrmfb frame buffer device registered panic notifier [drm] radeon: kernel modesetting successfully initialized. [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0 SCSI subsystem initialized libata version 3.00 loaded. sata_sil 0000:00:0e.0: version 2.4 sata_sil 0000:00:0e.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 sata_sil 0000:00:0e.0: Applying R_ERR on DMA activate FIS errata fix scsi0 : sata_sil scsi1 : sata_sil scsi2 : sata_sil scsi3 : sata_sil ata1: SATA max UDMA/100 mmio m1024@0xfde00000 tf 0xfde00080 irq 19 ata2: SATA max UDMA/100 mmio m1024@0xfde00000 tf 0xfde000c0 irq 19 ata3: SATA max UDMA/100 mmio m1024@0xfde00000 tf 0xfde00280 irq 19 ata4: SATA max UDMA/100 mmio m1024@0xfde00000 tf 0xfde002c0 irq 19 sata_promise 0000:00:08.0: version 2.12 sata_promise 0000:00:08.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 Floppy drive(s): fd0 is 1.44M scsi4 : sata_promise scsi5 : sata_promise scsi6 : sata_promise ata5: SATA max UDMA/133 mmio m4096@0xfda00000 ata 0xfda00200 irq 18 ata6: SATA max UDMA/133 mmio m4096@0xfda00000 ata 0xfda00280 irq 18 ata7: PATA max UDMA/133 mmio m4096@0xfda00000 ata 0xfda00300 irq 18 sata_via 0000:00:0f.0: version 2.4 sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20 sata_via 0000:00:0f.0: routed to hard irq line 10 scsi7 : sata_via scsi8 : sata_via ata8: SATA max UDMA/133 cmd 0xe800 ctl 0xe400 bmdma 0xd400 irq 20 ata9: SATA max UDMA/133 cmd 0xe000 ctl 0xd800 bmdma 0xd408 irq 20 pata_via 0000:00:0f.1: version 0.3.4 pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20 FDC 0 is a post-1991 82077 scsi9 : pata_via scsi10 : pata_via ata10: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 ata11: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 ata8: SATA link down 1.5 Gbps (SStatus 0 SControl 300) ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-13, max UDMA7 ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 ata5.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133 ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 0/32) ata5.00: configured for UDMA/133 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata2.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133 ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata2.00: configured for UDMA/100 scsi 1:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5 ata3: SATA link down (SStatus 0 SControl 310) ata4: SATA link down (SStatus 0 SControl 310) scsi 4:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5 ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata6.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133 ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 0/32) ata6.00: configured for UDMA/133 scsi 5:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5 ata9: SATA link down 1.5 Gbps (SStatus 0 SControl 300) sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 4:0:0:0: [sdc] Write Protect is off sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sd 5:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 5:0:0:0: [sdd] Write Protect is off sda: sdb: sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 sda1 sda2 unknown partition table sd 0:0:0:0: [sda] Attached SCSI disk unknown partition table sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 4:0:0:0: [sdc] Attached SCSI disk sd 1:0:0:0: [sdb] Attached SCSI disk sdd: unknown partition table sd 5:0:0:0: [sdd] Attached SCSI disk REISERFS (device sda1): found reiserfs format "3.6" with standard journal REISERFS (device sda1): using ordered data mode REISERFS (device sda1): journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sda1): checking transaction log (sda1) REISERFS (device sda1): Using r5 hash to sort names rtc_cmos 00:02: RTC can wake from S4 rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 114 bytes nvram udev: starting version 146 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 sd 4:0:0:0: Attached scsi generic sg2 type 0 sd 5:0:0:0: Attached scsi generic sg3 type 0 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 lp: driver loaded but no devices found skge 0000:00:0a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 skge 0000:00:0a.0: PCI: Disallowing DAC for device skge 1.13 addr 0xfdc00000 irq 17 chip Yukon-Lite rev 7 skge eth0: addr 00:0e:a6:80:44:65 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:10.4: EHCI Host Controller ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.4: irq 21, io mem 0xfdf00000 ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.0: irq 21, io base 0x0000b400 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.1: irq 21, io base 0x0000b800 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.3: UHCI Host Controller uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:10.3: irq 21, io base 0x0000c400 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ppdev: user-space parallel port driver input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 ACPI: Power Button [PWRB] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4 ACPI: Sleep Button [SLPB] processor LNXCPU:00: registered as cooling_device0 parport_pc 00:08: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP] lp0: using parport0 (interrupt-driven). VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22 VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 psmouse serio1: ID: 00 00 3c codec_read: codec 0 is not valid [0xfe0000] codec_read: codec 0 is not valid [0xfe0000] codec_read: codec 0 is not valid [0xfe0000] codec_read: codec 0 is not valid [0xfe0000] VIA 82xx Modem 0000:00:11.6: enabling device (0000 -> 0001) VIA 82xx Modem 0000:00:11.6: PCI INT C -> GSI 22 (level, low) -> IRQ 22 input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input5 VIA 82xx Modem 0000:00:11.6: setting latency timer to 64 VIA 82xx Modem 0000:00:11.6: PCI INT C disabled VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13 Adding 2056312k swap on /dev/sda2. Priority:-1 extents:1 across:2056312k