Linux version 2.6.31-rc9-g59e32bc (root@pc2200) (gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #5 Mon Oct 26 17:31:52 CET 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000002fff0000 (usable) BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS) BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) DMI 2.2 present. Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0x2fff0 max_arch_pfn = 0x100000 initial memory mapped : 0 - 01800000 init_memory_mapping: 0000000000000000-000000002fff0000 0000000000 - 0000400000 page 4k 0000400000 - 002fc00000 page 2M 002fc00000 - 002fff0000 page 4k kernel direct mapping tables up to 2fff0000 @ 10000-15000 ACPI: RSDP 000f6c80 00014 (v00 AWARD ) ACPI: RSDT 2fff3000 0002C (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) ACPI: FACP 2fff3040 00074 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) ACPI: DSDT 2fff30c0 03947 (v01 AWARD AWRDACPI 00001000 MSFT 0100000E) ACPI: FACS 2fff0000 00040 ACPI: APIC 2fff6a40 0005A (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) 767MB LOWMEM available. mapped low ram: 0 - 2fff0000 low ram: 0 - 2fff0000 node 0 low ram: 00000000 - 2fff0000 node 0 bootmap 00011000 - 00017000 (6 early reservations) ==> bootmem [0000000000 - 002fff0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0001000000 - 00013a5e24] TEXT DATA BSS ==> [0001000000 - 00013a5e24] #2 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #3 [00013a6000 - 00013ac076] BRK ==> [00013a6000 - 00013ac076] #4 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] #5 [0000011000 - 0000017000] BOOTMAP ==> [0000011000 - 0000017000] Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x0002fff0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0002fff0 On node 0 totalpages: 196479 free_area_init_node: node 0, pgdat c1347a80, node_mem_map c13ad200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3951 pages, LIFO batch:0 Normal zone: 1504 pages used for memmap Normal zone: 190992 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 30000000 (gap: 30000000:cec00000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194943 Kernel command line: root=/dev/sda4 video=VGA-1:1024x768e PID hash table entries: 4096 (order: 12, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Memory: 775080k/786368k available (2460k kernel code, 10724k reserved, 907k data, 232k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffe5000 - 0xfffff000 ( 104 kB) vmalloc : 0xf07f0000 - 0xfffe3000 ( 247 MB) lowmem : 0xc0000000 - 0xefff0000 ( 767 MB) .init : 0xc134a000 - 0xc1384000 ( 232 kB) .data : 0xc1267233 - 0xc1349f28 ( 907 kB) .text : 0xc1000000 - 0xc1267233 (2460 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. NR_IRQS:16 Fast TSC calibration using PIT Detected 1499.806 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Calibrating delay loop (skipped), value calculated using timer frequency.. 2999.61 BogoMIPS (lpj=1499806) Mount-cache hash table entries: 512 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) mce: CPU supports 4 MCE banks CPU: AMD Sempron(tm) 2200+ stepping 00 Checking 'hlt' instruction... OK. ACPI: Core revision 20090521 ACPI: setting ELCR to 0200 (from 0e28) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfb140, last bus=1 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using PIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: reg 10 32bit mmio: [0xe8000000-0xebffffff] pci 0000:00:02.0: Enabling SiS 96x SMBus pci 0000:00:02.1: reg 20 io port: [0x10c0-0x10df] pci 0000:00:02.5: reg 10 io port: [0x1f0-0x1f7] pci 0000:00:02.5: reg 14 io port: [0x3f4-0x3f7] pci 0000:00:02.5: reg 18 io port: [0x170-0x177] pci 0000:00:02.5: reg 1c io port: [0x374-0x377] pci 0000:00:02.5: reg 20 io port: [0x4000-0x400f] pci 0000:00:02.5: supports D2 pci 0000:00:02.5: PME# supported from D3cold pci 0000:00:02.5: PME# disabled pci 0000:00:02.7: reg 10 io port: [0xe000-0xe0ff] pci 0000:00:02.7: reg 14 io port: [0xe400-0xe47f] pci 0000:00:02.7: supports D1 D2 pci 0000:00:02.7: PME# supported from D3hot D3cold pci 0000:00:02.7: PME# disabled pci 0000:00:03.0: reg 10 32bit mmio: [0xee023000-0xee023fff] pci 0000:00:03.1: reg 10 32bit mmio: [0xee020000-0xee020fff] pci 0000:00:03.2: reg 10 32bit mmio: [0xee021000-0xee021fff] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold pci 0000:00:03.2: PME# disabled pci 0000:00:04.0: reg 10 io port: [0xe800-0xe8ff] pci 0000:00:04.0: reg 14 32bit mmio: [0xee022000-0xee022fff] pci 0000:00:04.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:00:04.0: supports D1 D2 pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:01:00.0: reg 10 32bit mmio: [0xec000000-0xecffffff] pci 0000:01:00.0: reg 14 32bit mmio: [0xe0000000-0xe7ffffff] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x00ffff] pci 0000:00:01.0: bridge 32bit mmio: [0xec000000-0xedffffff] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xe7ffffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15) SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered system 00:00: iomem range 0xcc000-0xcffff has been reserved system 00:00: iomem range 0xf0000-0xf7fff could not be reserved system 00:00: iomem range 0xf8000-0xfbfff could not be reserved system 00:00: iomem range 0xfc000-0xfffff could not be reserved system 00:00: iomem range 0x2fff0000-0x2fffffff could not be reserved system 00:00: iomem range 0xffff0000-0xffffffff has been reserved system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0x100000-0x2ffeffff could not be reserved system 00:00: iomem range 0xffee0000-0xffefffff has been reserved system 00:00: iomem range 0xfffe0000-0xfffeffff has been reserved system 00:00: iomem range 0xfec00000-0xfecfffff could not be reserved system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved system 00:02: ioport range 0x4d0-0x4d1 has been reserved system 00:02: ioport range 0x800-0x805 has been reserved system 00:02: ioport range 0x290-0x297 has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: 0xec000000-0xedffffff pci 0000:00:01.0: PREFETCH window: 0xe0000000-0xe7ffffff pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:01: resource 1 mem: [0xec000000-0xedffffff] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xe7ffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 msgmni has been set to 1514 alg: No test for stdrng (krng) io scheduler noop registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 ACPI: Sleep Button [FUTS] fan PNP0C0B:00: registered as cooling_device0 ACPI: Fan [FAN] (on) processor LNXCPU:00: registered as cooling_device1 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (40 C) Real Time Clock Driver v1.12b Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A loop: module loaded pata_sis 0000:00:02.5: version 0.5.2 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered pata_sis 0000:00:02.5: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 scsi0 : pata_sis scsi1 : pata_sis ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4000 irq 14 ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4008 irq 15 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 15 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 ata1.00: ATAPI: YAMAHA CRW-F1E, 1.0g, max UDMA/33 ata1.01: ATA-4: FUJITSU MPD3084AT, DD-03-47, max UDMA/66 ata1.01: 16514064 sectors, multi 16: LBA ata1.01: limited to UDMA/33 due to 40-wire cable ata1.00: configured for UDMA/33 ata1.01: configured for UDMA/33 scsi 0:0:0:0: CD-ROM YAMAHA CRW-F1E 1.0g PQ: 0 ANSI: 2 sr0: scsi3-mmc drive: 44x/44x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 scsi 0:0:1:0: Direct-Access ATA FUJITSU MPD3084A DD-0 PQ: 0 ANSI: 5 sd 0:0:1:0: [sda] 16514064 512-byte logical blocks: (8.45 GB/7.87 GiB) sd 0:0:1:0: [sda] Write Protect is off sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: ata2.00: ATA-3: SAMSUNG SV0844A, JR101, max UDMA/33 ata2.00: 16514064 sectors, multi 16: LBA ata2.01: ATA-4: ST38641A, 3.11, max UDMA/33 ata2.01: 16809660 sectors, multi 32: LBA ata2.00: configured for UDMA/33 ata2.01: configured for UDMA/33 ata2.00: configured for UDMA/33 ata2.01: configured for UDMA/33 ata2: EH complete scsi 1:0:0:0: Direct-Access ATA SAMSUNG SV0844A JR10 PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 16514064 512-byte logical blocks: (8.45 GB/7.87 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 scsi 1:0:1:0: Direct-Access ATA ST38641A 3.11 PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] Attached SCSI disk sd 1:0:1:0: [sdc] 16809660 512-byte logical blocks: (8.60 GB/8.01 GiB) sd 1:0:1:0: [sdc] Write Protect is off sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00 sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sd 1:0:1:0: [sdc] Attached SCSI disk Switched to high resolution mode on CPU 0 sda1 sda2 sda3 sda4 sd 0:0:1:0: [sda] Attached SCSI disk input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with writeback data mode. VFS: Mounted root (ext3 filesystem) readonly on device 8:4. Freeing unused kernel memory: 232k freed udev: starting version 141 Linux agpgart interface v0.103 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ohci_hcd 0000:00:03.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11 ohci_hcd 0000:00:03.0: OHCI Host Controller ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:03.0: irq 11, io mem 0xee023000 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 3 PCI: setting IRQ 3 as level-triggered ehci_hcd 0000:00:03.2: PCI INT D -> Link[LNKH] -> GSI 3 (level, low) -> IRQ 3 ehci_hcd 0000:00:03.2: EHCI Host Controller ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:03.2: cache line size of 64 is not supported ehci_hcd 0000:00:03.2: irq 3, io mem 0xee021000 sis900.c: v1.08.10 Apr. 2 2006 ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 9 PCI: setting IRQ 9 as level-triggered ohci_hcd 0000:00:03.1: PCI INT B -> Link[LNKF] -> GSI 9 (level, low) -> IRQ 9 ohci_hcd 0000:00:03.1: OHCI Host Controller ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:03.1: irq 9, io mem 0xee020000 sr 0:0:0:0: Attached scsi generic sg0 type 5 sd 0:0:1:0: Attached scsi generic sg1 type 0 sd 1:0:0:0: Attached scsi generic sg2 type 0 sd 1:0:1:0: Attached scsi generic sg3 type 0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 sis900 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. 0000:00:04.0: Using transceiver found at address 1 as default eth0: SiS 900 PCI Fast Ethernet at 0xe800, IRQ 11, 00:01:6c:be:f4:21 agpgart-sis 0000:00:00.0: SiS chipset [1039/0741] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xe8000000 sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x10c0 usb 2-6: new high speed USB device using ehci_hcd and address 4 usb 2-6: configuration #1 chosen from 1 choice ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered Intel ICH 0000:00:02.7: PCI INT C -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5 cfg80211: Calling CRDA to update world regulatory domain usb 3-1: new full speed USB device using ohci_hcd and address 2 [drm] Initialized drm 1.1.0 20060810 usb 3-1: configuration #1 chosen from 1 choice intel8x0_measure_ac97_clock: measured 50598 usecs (2435 samples) intel8x0: clocking to 48000 usb 2-6: reset high speed USB device using ehci_hcd and address 4 usb 2-6: firmware: requesting isl3887usb usb 3-2: new full speed USB device using ohci_hcd and address 3 usb 3-2: configuration #1 chosen from 1 choice input: PHILIPS MCE USB RF Receiver as /devices/pci0000:00/0000:00:03.1/usb3/3-2/3-2:1.0/input/input5 generic-usb 0003:0471:0614.0001: input: USB HID v1.00 Device [PHILIPS MCE USB RF Receiver] on usb-0000:00:03.1-2/input0 pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 [drm] nouveau 0000:01:00.0: Detected an NV11 generation card (0x011000a1) [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0 phy0: p54 detected a LM87 firmware p54: rx_mtu reduced from 3240 to 2384 phy0: FW rev 2.13.24.0 - Softmac protocol 5.9 phy0: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:YES phy0: hwaddr 00:30:f1:dd:fd:87, MAC:isl3887 RF:Frisbee phy0: Selected rate control algorithm 'minstrel' usb 2-6: is registered as 'phy0' usbcore: registered new interface driver p54usb EXT3 FS on sda4, internal journal REISERFS (device sda2): found reiserfs format "3.6" with standard journal REISERFS (device sda2): using ordered data mode REISERFS (device sda2): journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sda2): checking transaction log (sda2) REISERFS (device sda2): Using r5 hash to sort names Adding 248996k swap on /dev/sda3. Priority:-1 extents:1 across:248996k eth0: Media Link Off NET: Registered protocol family 17 wlan0: authenticate with AP 00:23:08:03:df:fd wlan0: authenticated wlan0: associate with AP 00:23:08:03:df:fd wlan0: RX AssocResp from 00:23:08:03:df:fd (capab=0x411 status=0 aid=2) wlan0: associated cfg80211: Calling CRDA for country: DE [drm] Module unloaded [drm] Initialized drm 1.1.0 20060810 [drm] nouveau 0000:01:00.0: Detected an NV11 generation card (0x011000a1) [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM [drm] nouveau 0000:01:00.0: ... appears to be valid [drm] nouveau 0000:01:00.0: BMP BIOS found [drm] nouveau 0000:01:00.0: BMP version 5.17 [drm] nouveau 0000:01:00.0: Bios version 03.11.00.18 [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 1.1 [drm] nouveau 0000:01:00.0: No useful information in BIOS output table; adding all possible outputs [drm] nouveau 0000:01:00.0: Probing TV encoders on I2C bus: 1 [drm] nouveau 0000:01:00.0: No TV encoders found. [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x07FE [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x0EA7 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x0819 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x0E4E [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x08AC [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0x09BB [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0x08DA [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 7 at offset 0x0956 [TTM] Zone kernel: Available graphics memory: 387712 kiB. [drm] nouveau 0000:01:00.0: 32 MiB VRAM agpgart-sis 0000:00:00.0: AGP 3.5 bridge agpgart-sis 0000:00:00.0: bridge is in legacy mode, falling back to 2.x agpgart-sis 0000:00:00.0: putting AGP V2 device into 4x mode nouveau 0000:01:00.0: putting AGP V2 device into 4x mode [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture) [drm] nouveau 0000:01:00.0: Allocating FIFO number 0 [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0 [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0 [drm] nouveau 0000:01:00.0: Detected a VGA connector [drm] nouveau 0000:01:00.0: Detected a DVI-D connector [drm] nouveau 0000:01:00.0: Saving VGA fonts [drm] forcing VGA-1 connector ON [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x49000, bo ee58a0c0 fb0: nouveaufb frame buffer device registered panic notifier [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0