Linux version 2.6.31-ARCH (root@architect) (gcc version 4.4.2 (GCC) ) #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable) BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data) BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS) BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) DMI 2.3 present. AMI BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0x3ffb0 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0000000000 mask FFC0000000 write-back 1 base 00DC000000 mask FFFC000000 write-combining 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Scanning 0 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000010000 (reserved) modified: 0000000000010000 - 000000000009fc00 (usable) modified: 000000000009fc00 - 00000000000a0000 (reserved) modified: 00000000000e4000 - 0000000000100000 (reserved) modified: 0000000000100000 - 000000003ffb0000 (usable) modified: 000000003ffb0000 - 000000003ffc0000 (ACPI data) modified: 000000003ffc0000 - 000000003fff0000 (ACPI NVS) modified: 000000003fff0000 - 0000000040000000 (reserved) modified: 00000000ff780000 - 0000000100000000 (reserved) initial memory mapped : 0 - 01800000 init_memory_mapping: 0000000000000000-00000000377fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037400000 page 2M 0037400000 - 00377fe000 page 4k kernel direct mapping tables up to 377fe000 @ 10000-15000 RAMDISK: 3fef4000 - 3ff9fcd2 Allocated new RAMDISK: 00100000 - 001abcd2 Move RAMDISK from 000000003fef4000 - 000000003ff9fcd1 to 00100000 - 001abcd1 ACPI: RSDP 000fa7c0 00014 (v00 ACPIAM) ACPI: RSDT 3ffb0000 00030 (v01 A M I OEMRSDT 10000506 MSFT 00000097) ACPI: FACP 3ffb0200 00081 (v01 A M I OEMFACP 10000506 MSFT 00000097) ACPI: DSDT 3ffb03f0 03A3E (v01 A0036 A0036001 00000001 MSFT 0100000D) ACPI: FACS 3ffc0000 00040 ACPI: APIC 3ffb0390 00052 (v01 A M I OEMAPIC 10000506 MSFT 00000097) ACPI: OEMB 3ffc0040 0003F (v01 A M I OEMBIOS 10000506 MSFT 00000097) ACPI: Local APIC address 0xfee00000 135MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 node 0 low ram: 00000000 - 377fe000 node 0 bootmap 00011000 - 00017f00 (9 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0001000000 - 000156da44] TEXT DATA BSS ==> [0001000000 - 000156da44] #4 [000009d800 - 0000100000] BIOS reserved ==> [000009d800 - 0000100000] #5 [000156e000 - 0001574234] BRK ==> [000156e000 - 0001574234] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] #7 [0000100000 - 00001abcd2] NEW RAMDISK ==> [0000100000 - 00001abcd2] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] found SMP MP-table at [c00ff780] ff780 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x0003ffb0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0003ffb0 On node 0 totalpages: 261951 free_area_init_node: node 0, pgdat c141b740, node_mem_map c1575200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3951 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 272 pages used for memmap HighMem zone: 34466 pages, LIFO batch:7 Using APIC driver default Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 1 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 Allocating PCI resources starting at 40000000 (gap: 40000000:bf780000) NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 14 pages at c1d7a000, static data 34332 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259903 Kernel command line: root=/dev/sda1 ro nouveau.modeset=1 Unknown boot option `nouveau.modeset=1': ignoring PID hash table entries: 4096 (order: 12, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Initializing HighMem for node 0 (000377fe:0003ffb0) Memory: 1032088k/1048256k available (3111k kernel code, 15420k reserved, 1120k data, 416k init, 138952k highmem) virtual kernel memory layout: fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc1422000 - 0xc148a000 ( 416 kB) .data : 0xc1309ddd - 0xc1421ea8 (1120 kB) .text : 0xc1000000 - 0xc1309ddd (3111 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 NR_IRQS:512 Fast TSC calibration using PIT Detected 2002.426 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Calibrating delay loop (skipped), value calculated using timer frequency.. 4006.72 BogoMIPS (lpj=6674753) Security Framework initialized Mount-cache hash table entries: 512 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) mce: CPU supports 5 MCE banks Performance Counters: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic counters: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose counters: 0 ... counter mask: 000000000000000f Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20090521 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 00 Brought up 1 CPUs Total of 1 processors activated (4006.72 BogoMIPS). CPU0 attaching NULL sched-domain. Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI Warning: Incorrect checksum in table [OEMB] - 07, should be F8 20090521 tbutils-246 ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: reg 10 32bit mmio: [0xdc000000-0xdfffffff] pci 0000:00:01.0: supports D1 pci 0000:00:07.0: reg 10 32bit mmio: [0xf9a00000-0xf9a007ff] pci 0000:00:07.0: reg 14 io port: [0xa800-0xa87f] pci 0000:00:07.0: supports D2 pci 0000:00:07.0: PME# supported from D2 D3hot D3cold pci 0000:00:07.0: PME# disabled pci 0000:00:0a.0: reg 10 32bit mmio: [0xf9c00000-0xf9c03fff] pci 0000:00:0a.0: reg 14 io port: [0xb000-0xb0ff] pci 0000:00:0a.0: reg 30 32bit mmio: [0xf9b00000-0xf9b1ffff] pci 0000:00:0a.0: supports D1 D2 pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:0f.0: reg 10 io port: [0xd000-0xd007] pci 0000:00:0f.0: reg 14 io port: [0xc800-0xc803] pci 0000:00:0f.0: reg 18 io port: [0xc400-0xc407] pci 0000:00:0f.0: reg 1c io port: [0xc000-0xc003] pci 0000:00:0f.0: reg 20 io port: [0xb800-0xb80f] pci 0000:00:0f.0: reg 24 io port: [0xb400-0xb4ff] pci 0000:00:0f.1: reg 20 io port: [0xfc00-0xfc0f] pci 0000:00:10.0: reg 20 io port: [0xd400-0xd41f] pci 0000:00:10.0: supports D1 D2 pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.0: PME# disabled pci 0000:00:10.1: reg 20 io port: [0xd800-0xd81f] pci 0000:00:10.1: supports D1 D2 pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.1: PME# disabled pci 0000:00:10.2: reg 20 io port: [0xe000-0xe01f] pci 0000:00:10.2: supports D1 D2 pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.2: PME# disabled pci 0000:00:10.3: reg 20 io port: [0xe400-0xe41f] pci 0000:00:10.3: supports D1 D2 pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.3: PME# disabled pci 0000:00:10.4: reg 10 32bit mmio: [0xf9e00000-0xf9e000ff] pci 0000:00:10.4: supports D1 D2 pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.4: PME# disabled HPET not enabled in BIOS. You might try hpet=force boot option pci 0000:00:11.0: Enabled onboard AC97/MC97 devices pci 0000:00:11.5: reg 10 io port: [0xe800-0xe8ff] pci 0000:00:11.5: supports D1 D2 pci 0000:00:11.6: reg 10 io port: [0x00-0xff] pci 0000:01:00.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff] pci 0000:01:00.0: reg 14 32bit mmio: [0xe0000000-0xefffffff] pci 0000:01:00.0: reg 18 32bit mmio: [0xfa000000-0xfaffffff] pci 0000:01:00.0: reg 30 32bit mmio: [0xf9f00000-0xf9f1ffff] pci 0000:00:01.0: bridge 32bit mmio: [0xf9f00000-0xfbffffff] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xf8ffffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:09: io resource (0x10-0x1f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:09: io resource (0x22-0x3f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:09: io resource (0x44-0x5f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:09: io resource (0x62-0x63) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:09: io resource (0x65-0x6f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:09: io resource (0x72-0x7f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:09: io resource (0x80-0x80) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:09: io resource (0x84-0x86) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:09: io resource (0x88-0x88) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:09: io resource (0x8c-0x8e) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:09: io resource (0x90-0x9f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:09: io resource (0xa2-0xbf) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:09: io resource (0xe0-0xef) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered system 00:08: ioport range 0x680-0x6ff has been reserved system 00:08: ioport range 0x290-0x297 has been reserved system 00:09: ioport range 0x3e1-0x3e7 has been reserved system 00:09: ioport range 0x4d0-0x4d1 has been reserved system 00:09: ioport range 0x800-0x87f has been reserved system 00:09: ioport range 0x400-0x41f has been reserved system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0a: iomem range 0xfff80000-0xffffffff has been reserved system 00:0d: iomem range 0x0-0x9ffff could not be reserved system 00:0d: iomem range 0xc0000-0xdffff could not be reserved system 00:0d: iomem range 0xe0000-0xfffff could not be reserved system 00:0d: iomem range 0x100000-0x3ffeffff could not be reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: 0xf9f00000-0xfbffffff pci 0000:00:01.0: PREFETCH window: 0xe0000000-0xf8ffffff pci 0000:00:01.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:01: resource 1 mem: [0xf9f00000-0xfbffffff] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xf8ffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) Switched to high resolution mode on CPU 0 TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... Freeing initrd memory: 687k freed apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. Scanning for low memory corruption every 60 seconds audit: initializing netlink socket (disabled) type=2000 audit(1258641462.156:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1746 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:01.0: disabling DAC on VIA PCI bridge pci 0000:01:00.0: Boot video device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A input: Macintosh mouse button emulation as /devices/virtual/input/input0 PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 Initalizing network drop monitor service Freeing unused kernel memory: 416k freed input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 SCSI subsystem initialized libata version 3.00 loaded. pata_via 0000:00:0f.1: version 0.3.4 pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20 scsi0 : pata_via scsi1 : pata_via ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 ata1.00: ATA-7: ST3802110A, 2AAA, max UDMA/100 ata1.00: 156301488 sectors, multi 16: LBA48 ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA ST3802110A 2AAA PQ: 0 ANSI: 5 ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-H42N, RL00, max UDMA/66 ata2.00: configured for UDMA/66 scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H42N RL00 PQ: 0 ANSI: 5 sata_via 0000:00:0f.0: version 2.4 sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20 sata_via 0000:00:0f.0: routed to hard irq line 10 scsi2 : sata_via scsi3 : sata_via ata3: SATA max UDMA/133 cmd 0xd000 ctl 0xc800 bmdma 0xb800 irq 20 ata4: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb808 irq 20 ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATA-8: WDC WD5000AAKS-00YGA0, 12.01C02, max UDMA/133 ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata3.00: configured for UDMA/133 scsi 2:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5 ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300) Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 sda1 sda2 < sd 2:0:0:0: [sdb] Attached SCSI disk sda5 > sd 0:0:0:0: [sda] Attached SCSI disk sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with writeback data mode. rtc_cmos 00:02: RTC can wake from S4 rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 114 bytes nvram udev: starting version 146 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb cfg80211: Using static regulatory domain info cfg80211: Regulatory domain: US (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) cfg80211: Calling CRDA for country: US input: PC Speaker as /devices/platform/pcspkr/input/input2 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 sd 2:0:0:0: Attached scsi generic sg2 type 0 lp: driver loaded but no devices found skge 0000:00:0a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 skge 0000:00:0a.0: PCI: Disallowing DAC for device skge 1.13 addr 0xf9c00000 irq 17 chip Yukon-Lite rev 9 skge eth0: addr 00:11:d8:bf:7f:fc ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:10.4: EHCI Host Controller ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.4: irq 21, io mem 0xf9e00000 uhci_hcd: USB Universal Host Controller Interface driver ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d400 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d800 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.3: UHCI Host Controller uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e400 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ppdev: user-space parallel port driver ohci1394 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[f9a00000-f9a007ff] Max Packet=[2048] IR/IT contexts=[4/8] usb 1-1: new high speed USB device using ehci_hcd and address 2 usb 1-1: configuration #1 chosen from 1 choice VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22 VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 Linux agpgart interface v0.103 usb 1-2: new high speed USB device using ehci_hcd and address 3 input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button [PWRF] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 ACPI: Power Button [PWRB] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5 ACPI: Sleep Button [SLPB] processor LNXCPU:00: registered as cooling_device0 phy0: Selected rate control algorithm 'minstrel' Registered led device: rt2500usb-phy0::radio Registered led device: rt2500usb-phy0::quality usbcore: registered new interface driver rt2500usb parport_pc 00:07: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP] lp0: using parport0 (interrupt-driven). cfg80211: Regulatory domain changed to country: US (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) agpgart-amd64 0000:00:00.0: AGP bridge [1106/0282] agpgart-amd64 0000:00:00.0: AGP aperture is 64M @ 0xdc000000 VIA 82xx Modem 0000:00:11.6: enabling device (0000 -> 0001) VIA 82xx Modem 0000:00:11.6: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [drm] Initialized drm 1.1.0 20060810 ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d8000020a272] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x043000a4) [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM [drm] nouveau 0000:01:00.0: ... BIOS signature not found [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN VIA 82xx Modem 0000:00:11.6: setting latency timer to 64 VIA 82xx Modem 0000:00:11.6: PCI INT C disabled VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13 [drm] nouveau 0000:01:00.0: ... appears to be valid [drm] nouveau 0000:01:00.0: BIT BIOS found [drm] nouveau 0000:01:00.0: Bios version 05.43.02.92 [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0 [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00000028 [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 04011312 00000000 [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028 [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 020223f1 00c0c083 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE15B [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE597 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xEA11 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEB9C [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEC7C [TTM] Zone kernel: Available graphics memory: 447268 kiB. [TTM] Zone highmem: Available graphics memory: 516744 kiB. [drm] nouveau 0000:01:00.0: 128 MiB VRAM agpgart-amd64 0000:00:00.0: AGP 3.0 bridge agpgart: modprobe tried to set rate=x12. Setting to AGP3 x8 mode. agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode nouveau 0000:01:00.0: putting AGP V3 device into 8x mode [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture) [drm] nouveau 0000:01:00.0: Allocating FIFO number 0 [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0 [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0 [drm] nouveau 0000:01:00.0: Detected a VGA connector [drm] nouveau 0000:01:00.0: Detected a DVI-I connector [drm] nouveau 0000:01:00.0: Detected a TV connector [drm] nouveau 0000:01:00.0: Saving VGA fonts [drm] nouveau 0000:01:00.0: Load detected on output B [drm] nouveau 0000:01:00.0: allocated 1680x1050 fb: 0x49000, bo f6829700 [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0 [drm] nouveau 0000:01:00.0: vpll: n 22 m 5 log2p 0 [drm] TMDS-8: set mode 1680x1050 38 [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0 [drm] nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 1 [drm] nouveau 0000:01:00.0: 0xD5B3: Parsing digital output script table [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1) [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output C [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3) [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1 [drm] nouveau 0000:01:00.0: vpll: n 20 m 3 log2p 1 [drm] TV-10: set mode 720x576 39 [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 1 [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on TV encoder (output 3) [drm] nouveau 0000:01:00.0: Output TV-1 is running on CRTC 1 using output B Console: switching to colour frame buffer device 90x36 fb0: nouveaufb frame buffer device registered panic notifier [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0 EXT3 FS on sda1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with writeback data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sdb1, internal journal EXT3-fs: mounted filesystem with writeback data mode. Adding 1044216k swap on /dev/sdb2. Priority:-1 extents:1 across:1044216k usb 1-2: configuration #1 chosen from 1 choice Initializing USB Mass Storage driver... scsi4 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning usb 3-2: new low speed USB device using uhci_hcd and address 2 usb 3-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: HID 1241:1166 as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/input/input6 generic-usb 0003:1241:1166.0001: input,hidraw0: USB HID v1.10 Mouse [HID 1241:1166] on usb-0000:00:10.1-2/input0 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver scsi 4:0:0:0: Direct-Access WD 2500JB External 0108 PQ: 0 ANSI: 0 sd 4:0:0:0: Attached scsi generic sg3 type 0 usb-storage: device scan complete sd 4:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB) sd 4:0:0:0: [sdc] Write Protect is off sd 4:0:0:0: [sdc] Mode Sense: 03 00 00 00 sd 4:0:0:0: [sdc] Assuming drive cache: write through sd 4:0:0:0: [sdc] Assuming drive cache: write through sdc: sdc1 sd 4:0:0:0: [sdc] Assuming drive cache: write through sd 4:0:0:0: [sdc] Attached SCSI disk NET: Registered protocol family 10 lo: Disabled Privacy Extensions skge eth0: enabling interface ADDRCONF(NETDEV_UP): eth0: link is not ready ADDRCONF(NETDEV_UP): wlan0: link is not ready [drm] nouveau 0000:01:00.0: Load detected on output B [drm] nouveau 0000:01:00.0: Load detected on output B [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3) [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1 [drm] nouveau 0000:01:00.0: vpll: n 20 m 3 log2p 1 [drm] TV-10: set mode 1024x768 3b [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 1 [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on TV encoder (output 3) [drm] nouveau 0000:01:00.0: Output TV-1 is running on CRTC 1 using output B wlan0: authenticate with AP 00:14:bf:3c:ca:b3 wlan0: authenticated wlan0: associate with AP 00:14:bf:3c:ca:b3 wlan0: RX AssocResp from 00:14:bf:3c:ca:b3 (capab=0x431 status=0 aid=2) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: no IPv6 routers present [drm] nouveau 0000:01:00.0: Load detected on output B [drm] nouveau 0000:01:00.0: Load detected on output B