sdb: sdb1 sdb2 sdb3
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Attached SCSI disk
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
[drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
[drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 1)
[drm] nouveau 0000:01:00.0: Calling LVDS script 6:
[drm] nouveau 0000:01:00.0: 0xD202: Parsing digital output script table
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
[drm] nouveau 0000:01:00.0: vpll: n 22 m 5 log2p 0
[drm] DAC-7: set mode 1680x1050 31
[drm] nouveau 0000:01:00.0: nv04_dac_mode_set called for encoder 0
[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
[drm] nouveau 0000:01:00.0: vpll: n 21 m 4 log2p 1
[drm] LVDS-8: set mode 1280x800 34
[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 1
[drm] nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 1
[drm] nouveau 0000:01:00.0: Calling LVDS script 2:
[drm] nouveau 0000:01:00.0: 0xD262: Parsing digital output script table
[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 1)
[drm] nouveau 0000:01:00.0: Calling LVDS script 5:
[drm] nouveau 0000:01:00.0: 0xD1DE: Parsing digital output script table
[drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 1 using output A
eth1: no IPv6 routers present
usb 1-1.2.1: new high speed USB device using ehci_hcd and address 7
usb 1-1.2.1: New USB device found, idVendor=046d, idProduct=09a1
usb 1-1.2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=2
usb 1-1.2.1: SerialNumber: 59E69D20
usb 1-1.2.1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver snd-usb-audio
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device <unnamed> (046d:09a1)
input: UVC Camera (046d:09a1) as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/input/input10
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
ACPI: EC: non-query interrupt received, switching to interrupt mode
lib80211_crypt: registered algorithm 'WEP'
spurious 8259A interrupt: IRQ7.
hub 1-1.2:1.0: port 4 disabled by hub (EMI?), re-enabling...
usb 1-1.2.4: USB disconnect, address 5
usb 1-1.2.4: new low speed USB device using ehci_hcd and address 8
usb 1-1.2.4: New USB device found, idVendor=1267, idProduct=0103
usb 1-1.2.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1.2.4: configuration #1 chosen from 1 choice
input: HID 1267:0103 as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4:1.0/input/input11
generic-usb 0003:1267:0103.0004: input,hidraw1: USB HID v1.10 Keyboard [HID 1267:0103] on usb-0000:00:1d.7-1.2.4/input0
input: HID 1267:0103 as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4:1.1/input/input12
generic-usb 0003:1267:0103.0005: input,hidraw2: USB HID v1.10 Device [HID 1267:0103] on usb-0000:00:1d.7-1.2.4/input1
npviewer.bin[2549] general protection ip:129d04c sp:bf9f5b50 error:0 in libflashplayer.so[f2d000+990000]
SELinux: 8192 avtab hash slots, 149515 rules.
SELinux: 8192 avtab hash slots, 149515 rules.
SELinux:  8 users, 12 roles, 3057 types, 139 bools, 1 sens, 1024 cats
SELinux:  75 classes, 149515 rules
[TTM] Failed moving buffer. Proposed placement 0x00070004
[TTM] Out of aperture space or DRM memory quota.
[TTM] Failed moving buffer. Proposed placement 0x00070004
[TTM] Out of aperture space or DRM memory quota.
[TTM] Failed moving buffer. Proposed placement 0x00070004
[TTM] Out of aperture space or DRM memory quota.
[TTM] Failed moving buffer. Proposed placement 0x00070004
[TTM] Out of aperture space or DRM memory quota.
[drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1
[drm:edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 16
[drm:edid_is_valid] *ERROR* Raw EDID:
<3>00 ff ff ff ff ff ff 00 4c 2d e4 03 32 32 57 54  ........L-..22WT
<3>18 12 01 03 0e 2f 1e 78 2a ee 91 b3 54 4c 99 26  ...../.x*...TL.&
<3>0f 50 54 bf ef 80 b3 00 81 80 81 40 71 4f 01 01  .PT........@qO..
<3>01 01 01 01 01 01 7c 2e 90 a0 60 1a 1e 40 30 20  ......|...`..@0 
<3>36 00 da 28 11 00 00 1a 00 00 00 fd 00 38 4b 1e  6..(.........8K.
<3>51 0e 00 0a 20 20 20 20 20 20 00 00 00 fc 00 53  Q...      .....S
<3>79 6e 63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff  yncMaster.  ....
<3>00 48 56 42 51 36 30 39 34 38 37 0a 20 20 00 96  .HVBQ609487.  ..

nouveau 0000:01:00.0: VGA-1: EDID invalid.
[drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
[drm:edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 1
[drm:edid_is_valid] *ERROR* Raw EDID:
<3>00 ff ff ff ff ff ff 00 4c 2d e4 03 32 32 57 54  ........L-..22WT
<3>18 12 01 03 0f 2f 1e 78 2a ee 91 a3 54 4c 99 26  ...../.x*...TL.&
<3>0f 50 54 bf ef 80 b3 00 81 80 81 40 71 4f 01 01  .PT........@qO..
<3>01 01 01 01 01 01 7c 2e 90 a0 60 1a 1e 40 30 20  ......|...`..@0 
<3>36 00 da 28 11 00 00 1a 00 00 00 fd 00 38 4b 1e  6..(.........8K.
<3>51 0e 00 0a 20 20 20 20 20 20 00 00 00 fc 00 53  Q...      .....S
<3>79 6e 63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff  yncMaster.  ....
<3>00 48 56 42 51 36 30 39 34 38 37 0a 20 20 00 96  .HVBQ609487.  ..

nouveau 0000:01:00.0: VGA-1: EDID invalid.
[drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
[drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 1)
[drm] nouveau 0000:01:00.0: Calling LVDS script 6:
[drm] nouveau 0000:01:00.0: 0xD202: Parsing digital output script table
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
[drm] nouveau 0000:01:00.0: vpll: n 21 m 4 log2p 1
[drm] LVDS-8: set mode 1280x800 11
[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
[drm] nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 1
[drm] nouveau 0000:01:00.0: Calling LVDS script 2:
[drm] nouveau 0000:01:00.0: 0xD262: Parsing digital output script table
[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 1)
[drm] nouveau 0000:01:00.0: Calling LVDS script 5:
[drm] nouveau 0000:01:00.0: 0xD1DE: Parsing digital output script table
[drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 0 using output A
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 1)
[drm] nouveau 0000:01:00.0: Calling LVDS script 6:
[drm] nouveau 0000:01:00.0: 0xD202: Parsing digital output script table
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
[drm] nouveau 0000:01:00.0: vpll: n 22 m 5 log2p 0
[drm] DAC-7: set mode 1680x1050 2d
[drm] nouveau 0000:01:00.0: nv04_dac_mode_set called for encoder 0
[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
[drm] nouveau 0000:01:00.0: vpll: n 21 m 4 log2p 1
[drm] LVDS-8: set mode 1280x800 2e
[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 1
[drm] nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 1
[drm] nouveau 0000:01:00.0: Calling LVDS script 6:
[drm] nouveau 0000:01:00.0: 0xD202: Parsing digital output script table
[drm] nouveau 0000:01:00.0: Calling LVDS script 2:
[drm] nouveau 0000:01:00.0: 0xD262: Parsing digital output script table
[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 1)
[drm] nouveau 0000:01:00.0: Calling LVDS script 5:
[drm] nouveau 0000:01:00.0: 0xD1DE: Parsing digital output script table
[drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 1 using output A
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0