Linux version 2.6.31-gentoo-r6-nyx (root@nyx) (gcc version 4.4.2 (Gentoo 4.4.2 p1.0) ) #4 SMP PREEMPT Wed Dec 2 20:58:57 CET 2009 Command line: root=/dev/sda3 hpet=force iommu=force nouveau.modeset=1 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cffd0000 (usable) BIOS-e820: 00000000cffd0000 - 00000000cffde000 (ACPI data) BIOS-e820: 00000000cffde000 - 00000000d0000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000130000000 (usable) DMI present. AMI BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0x130000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0000000000 mask FF80000000 write-back 1 base 0080000000 mask FFC0000000 write-back 2 base 00C0000000 mask FFF0000000 write-back 3 base 0100000000 mask FFE0000000 write-back 4 base 0120000000 mask FFF0000000 write-back 5 base 00000DC000 mask 0FFFFFE000 write-back 6 disabled 7 disabled TOM2: 0000000130000000 aka 4864M ------------[ cut here ]------------ WARNING: at arch/x86/kernel/cpu/mtrr/generic.c:456 generic_get_mtrr+0xd1/0x136() Hardware name: MS-7310 mtrr: your BIOS has set up an incorrect mask, fixing it up. Modules linked in: Pid: 0, comm: swapper Not tainted 2.6.31-gentoo-r6-nyx #4 Call Trace: [] warn_slowpath_common+0x77/0x8f [] warn_slowpath_fmt+0x3c/0x3e [] generic_get_mtrr+0xd1/0x136 [] mtrr_trim_uncached_memory+0x87/0x52d [] setup_arch+0x3c1/0x7cb [] ? printk+0x3c/0x3e [] ? clockevents_register_notifier+0x3e/0x48 [] start_kernel+0x7c/0x351 [] x86_64_start_reservations+0xac/0xb0 [] x86_64_start_kernel+0xe4/0xeb ---[ end trace 4eaa2a86a8e2da22 ]--- e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xcffd0 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000cffd0000 0000000000 - 00cfe00000 page 2M 00cfe00000 - 00cffd0000 page 4k kernel direct mapping tables up to cffd0000 @ 10000-16000 init_memory_mapping: 0000000100000000-0000000130000000 0100000000 - 0130000000 page 2M kernel direct mapping tables up to 130000000 @ 14000-1a000 ACPI: RSDP 00000000000f91a0 00014 (v00 ACPIAM) ACPI: RSDT 00000000cffd0000 00038 (v01 A M I OEMRSDT 10000722 MSFT 00000097) ACPI: FACP 00000000cffd0200 00084 (v02 A M I OEMFACP 10000722 MSFT 00000097) ACPI: DSDT 00000000cffd0440 04512 (v01 1ADJT 1ADJT007 00000007 INTL 20051117) ACPI: FACS 00000000cffde000 00040 ACPI: APIC 00000000cffd0390 00070 (v01 A M I OEMAPIC 10000722 MSFT 00000097) ACPI: MCFG 00000000cffd0400 0003C (v01 A M I OEMMCFG 10000722 MSFT 00000097) ACPI: OEMB 00000000cffde040 00060 (v01 A M I AMI_OEM 10000722 MSFT 00000097) ACPI: SSDT 00000000cffd4960 0030E (v01 A M I POWERNOW 00000001 AMD 00000001) ACPI: Local APIC address 0xfee00000 (7 early reservations) ==> bootmem [0000000000 - 0130000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 00015a57f4] TEXT DATA BSS ==> [0001000000 - 00015a57f4] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #4 [00015a6000 - 00015a6180] BRK ==> [00015a6000 - 00015a6180] #5 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000] #6 [0000014000 - 0000015000] PGTABLE ==> [0000014000 - 0000015000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00130000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x000cffd0 0: 0x00100000 -> 0x00130000 On node 0 totalpages: 1048415 DMA zone: 56 pages used for memmap DMA zone: 104 pages reserved DMA zone: 3823 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 833544 pages, LIFO batch:31 Normal zone: 2688 pages used for memmap Normal zone: 193920 pages, LIFO batch:31 Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ0 used by override. ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000) NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 24 pages at ffff880028022000, static data 68000 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1031287 Kernel command line: root=/dev/sda3 hpet=force iommu=force nouveau.modeset=1 Unknown boot option `nouveau.modeset=1': ignoring PID hash table entries: 4096 (order: 12, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found Node 0: aperture @ 20000000 size 32 MB Aperture pointing to e820 RAM. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 20000000 Memory: 4055576k/4980736k available (3347k kernel code, 787076k absent, 137272k reserved, 1554k data, 376k init) NR_IRQS:320 Fast TSC calibration using PIT Detected 3015.277 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled Calibrating delay loop (skipped), value calculated using timer frequency.. 6030.55 BogoMIPS (lpj=3015277) Security Framework initialized Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 5 MCE banks using C1E aware idle routine ACPI: Core revision 20090521 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 6029.84 BogoMIPS (lpj=3014921) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 mce: CPU supports 5 MCE banks CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03 Brought up 2 CPUs Total of 2 processors activated (12060.39 BogoMIPS). NET: Registered protocol family 16 node 0 link 0: io port [1000, ffffff] TOM: 00000000d0000000 aka 3328M node 0 link 0: mmio [e0000000, efffffff] node 0 link 0: mmio [f9ff0000, f9ffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [d0000000, fe0bffff] TOM2: 0000000130000000 aka 4864M bus: [00,ff] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [d0000000, ffffffff] bus: 00 index 2 mmio: [f9ff0000, f9ffffff] bus: 00 index 3 mmio: [a0000, bffff] bus: 00 index 4 mmio: [130000000, fcffffffff] ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG at e0000000 - efffffff ACPI Warning: Incorrect checksum in table [OEMB] - E9, should be E8 20090521 tbutils-246 ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: Force enabled HPET at 0xfed00000 pci 0000:00:01.1: reg 10 io port: [0xcc00-0xcc1f] pci 0000:00:01.1: reg 20 io port: [0x5000-0x503f] pci 0000:00:01.1: reg 24 io port: [0x6000-0x603f] pci 0000:00:01.1: PME# supported from D3hot D3cold pci 0000:00:01.1: PME# disabled pci 0000:00:02.0: reg 10 32bit mmio: [0xf9fff000-0xf9ffffff] pci 0000:00:02.0: supports D1 D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:02.1: reg 10 32bit mmio: [0xf9ffec00-0xf9ffecff] pci 0000:00:02.1: supports D1 D2 pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.1: PME# disabled pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf] pci 0000:00:07.0: reg 10 io port: [0xc480-0xc487] pci 0000:00:07.0: reg 14 io port: [0xc400-0xc403] pci 0000:00:07.0: reg 18 io port: [0xc080-0xc087] pci 0000:00:07.0: reg 1c io port: [0xc000-0xc003] pci 0000:00:07.0: reg 20 io port: [0xbc00-0xbc0f] pci 0000:00:07.0: reg 24 32bit mmio: [0xf9ffd000-0xf9ffdfff] pci 0000:00:0a.0: reg 10 32bit mmio: [0xf9ffc000-0xf9ffcfff] pci 0000:00:0a.0: reg 14 io port: [0xb880-0xb887] pci 0000:00:0a.0: supports D1 D2 pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.0: PME# disabled pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0c.0: PME# disabled pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0d.0: PME# disabled pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0e.0: PME# disabled pci 0000:01:09.0: reg 10 io port: [0xdc00-0xdc1f] pci 0000:01:09.0: supports D1 D2 pci 0000:01:09.1: reg 10 io port: [0xd880-0xd887] pci 0000:01:09.1: supports D1 D2 pci 0000:00:09.0: transparent bridge pci 0000:00:09.0: bridge io port: [0xd000-0xdfff] pci 0000:05:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff] pci 0000:05:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff] pci 0000:05:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff] pci 0000:05:00.0: reg 24 io port: [0xec00-0xec7f] pci 0000:05:00.0: reg 30 32bit mmio: [0xfeb80000-0xfebfffff] pci 0000:00:0e.0: bridge io port: [0xe000-0xefff] pci 0000:00:0e.0: bridge 32bit mmio: [0xfa000000-0xfebfffff] pci 0000:00:0e.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *10 ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *6 ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5 ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *15 ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *7 ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *3 ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 20000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 hpet0: 3 comparators, 32-bit 25.000000 MHz counter Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered system 00:06: ioport range 0x4d0-0x4d1 has been reserved system 00:06: ioport range 0x800-0x80f has been reserved system 00:06: ioport range 0x4000-0x407f has been reserved system 00:06: ioport range 0x4080-0x40ff has been reserved system 00:06: ioport range 0x4400-0x447f has been reserved system 00:06: ioport range 0x4480-0x44ff has been reserved system 00:06: ioport range 0x4800-0x487f has been reserved system 00:06: ioport range 0x4880-0x48ff has been reserved system 00:06: iomem range 0xfee01000-0xfeefffff has been reserved system 00:06: iomem range 0xfefff000-0xfeffffff has been reserved system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:07: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0a: ioport range 0xa00-0xa0f has been reserved system 00:0a: ioport range 0xa10-0xa1f has been reserved system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved system 00:0c: iomem range 0x0-0x9ffff could not be reserved system 00:0c: iomem range 0xc0000-0xcffff has been reserved system 00:0c: iomem range 0xe0000-0xfffff could not be reserved system 00:0c: iomem range 0x100000-0xcfffffff could not be reserved system 00:0c: iomem range 0xff780000-0xffffffff has been reserved pci 0000:00:09.0: PCI bridge, secondary bus 0000:01 pci 0000:00:09.0: IO window: 0xd000-0xdfff pci 0000:00:09.0: MEM window: disabled pci 0000:00:09.0: PREFETCH window: disabled pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02 pci 0000:00:0b.0: IO window: disabled pci 0000:00:0b.0: MEM window: disabled pci 0000:00:0b.0: PREFETCH window: disabled pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03 pci 0000:00:0c.0: IO window: disabled pci 0000:00:0c.0: MEM window: disabled pci 0000:00:0c.0: PREFETCH window: disabled pci 0000:00:0d.0: PCI bridge, secondary bus 0000:04 pci 0000:00:0d.0: IO window: disabled pci 0000:00:0d.0: MEM window: disabled pci 0000:00:0d.0: PREFETCH window: disabled pci 0000:00:0e.0: PCI bridge, secondary bus 0000:05 pci 0000:00:0e.0: IO window: 0xe000-0xefff pci 0000:00:0e.0: MEM window: 0xfa000000-0xfebfffff pci 0000:00:0e.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff pci 0000:00:09.0: setting latency timer to 64 pci 0000:00:0b.0: setting latency timer to 64 pci 0000:00:0c.0: setting latency timer to 64 pci 0000:00:0d.0: setting latency timer to 64 pci 0000:00:0e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] pci_bus 0000:01: resource 3 io: [0x00-0xffff] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:05: resource 0 io: [0xe000-0xefff] pci_bus 0000:05: resource 1 mem: [0xfa000000-0xfebfffff] pci_bus 0000:05: resource 2 pref mem [0xd0000000-0xdfffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 audit: initializing netlink socket (disabled) type=2000 audit(1259789484.170:1): initialized msgmni has been set to 7922 alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:0b.0: Found disabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:0b.0: Linking AER extended capability pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:0c.0: Found disabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:0c.0: Linking AER extended capability pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:0d.0: Found disabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:0d.0: Linking AER extended capability pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:0e.0: Found disabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:0e.0: Linking AER extended capability pci 0000:05:00.0: Boot video device pcieport-driver 0000:00:0b.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:0b.0: setting latency timer to 64 pcieport-driver 0000:00:0c.0: irq 25 for MSI/MSI-X pcieport-driver 0000:00:0c.0: setting latency timer to 64 pcieport-driver 0000:00:0d.0: irq 26 for MSI/MSI-X pcieport-driver 0000:00:0d.0: setting latency timer to 64 pcieport-driver 0000:00:0e.0: irq 27 for MSI/MSI-X pcieport-driver 0000:00:0e.0: setting latency timer to 64 Real Time Clock Driver v1.12b Non-volatile memory driver v1.3 Linux agpgart interface v0.103 Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Uniform Multi-Platform E-IDE driver amd74xx 0000:00:06.0: UDMA133 controller amd74xx 0000:00:06.0: IDE controller (0x10de:0x0053 rev 0xf3) amd74xx 0000:00:06.0: IDE port disabled amd74xx 0000:00:06.0: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7 Probing IDE interface ide0... hda: ST3250824A, ATA DISK drive hdb: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/100 mode selected hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hdb: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide-gd driver 1.18 hda: max request size: 512KiB hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63 hda: cache flushes supported hda: hda1 hda2 < hda5 hda6 > sata_nv 0000:00:07.0: version 3.5 ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 sata_nv 0000:00:07.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 sata_nv 0000:00:07.0: setting latency timer to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0xc480 ctl 0xc400 bmdma 0xbc00 irq 23 ata2: SATA max UDMA/133 cmd 0xc080 ctl 0xc000 bmdma 0xbc08 irq 23 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice i2c /dev entries driver device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu Advanced Linux Sound Architecture Driver Version 1.0.20. ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 19 EMU10K1_Audigy 0000:01:09.0: PCI INT A -> Link[LNKD] -> GSI 19 (level, low) -> IRQ 19 ALSA device list: #0: SB Live! 5.1 Dell OEM [SB0228] (rev.10, serial:0x80661102) at 0xdc00, irq 19 TCP cubic registered NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. registered taskstats version 1 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 ata1: SATA link down (SStatus 0 SControl 300) ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5CA, max UDMA/133 ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata2.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA Hitachi HDP72505 GM4O PQ: 0 ANSI: 5 sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 > sd 1:0:0:0: [sda] Attached SCSI disk kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with writeback data mode. VFS: Mounted root (ext3 filesystem) readonly on device 8:3. Freeing unused kernel memory: 376k freed udev: starting version 147 i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000 i2c-adapter i2c-1: nForce2 SMBus adapter at 0x6000 k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 processor LNXCPU:00: registered as cooling_device0 processor LNXCPU:01: registered as cooling_device1 gameport: EMU10K1 is pci0000:01:09.1/gameport0, io 0xd880, speed 1202kHz forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22 forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22 forcedeth 0000:00:0a.0: setting latency timer to 64 nv_probe: set workaround bit for reversed mac addr usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ide-cd driver 5.00 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 18 nvidiafb 0000:05:00.0: PCI INT A -> Link[LNKC] -> GSI 18 (level, low) -> IRQ 18 nvidiafb: Device ID: 10de0641 nvidiafb: unknown NV_ARCH ide-cd: hdb: ATAPI 40X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x1c1 @ 1, addr 00:16:17:70:8b:50 forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3 ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21 ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:02.1: setting latency timer to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 ehci_hcd 0000:00:02.1: cache line size of 64 is not supported ehci_hcd 0000:00:02.1: irq 21, io mem 0xf9ffec00 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20 ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20 ohci_hcd 0000:00:02.0: setting latency timer to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 20, io mem 0xf9fff000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 8 ports detected usb 2-1: new low speed USB device using ohci_hcd and address 2 nvidia: module license 'NVIDIA' taints kernel. Disabling lock debugging due to kernel taint usb 2-1: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: Logitech USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input1 generic-usb 0003:046D:C00C.0001: input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:02.0-1/input0 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nvidia 0000:05:00.0: setting latency timer to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 190.42 Tue Oct 20 20:25:42 PDT 2009 [drm] Initialized drm 1.1.0 20060810 powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0x16 (3000 MHz), vid 0x8 powernow-k8: 1 : fid 0x14 (2800 MHz), vid 0xa powernow-k8: 2 : fid 0x12 (2600 MHz), vid 0xc powernow-k8: 3 : fid 0x10 (2400 MHz), vid 0xe powernow-k8: 4 : fid 0xe (2200 MHz), vid 0x10 powernow-k8: 5 : fid 0xc (2000 MHz), vid 0x10 powernow-k8: 6 : fid 0xa (1800 MHz), vid 0x10 powernow-k8: 7 : fid 0x2 (1000 MHz), vid 0x12 vboxdrv: Trying to deactivate the NMI watchdog permanently... vboxdrv: Successfully done. vboxdrv: Found 2 processor cores. VBoxDrv: dbg - g_abExecMemory=ffffffffa0ae8e40 vboxdrv: fAsync=1 offMin=0x14140 offMax=0x14140 vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'. vboxdrv: Successfully loaded version 3.0.12 (interface 0x00110000). VBoxNetFlt: dbg - g_abExecMemory=ffffffffa0c85a20 VBoxNetAdp: dbg - g_abExecMemory=ffffffffa0c9e5e0 EXT3 FS on sda3, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with writeback data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with writeback data mode. REISERFS (device sda5): found reiserfs format "3.6" with standard journal REISERFS (device sda5): using ordered data mode REISERFS (device sda5): journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sda5): checking transaction log (sda5) REISERFS (device sda5): Using r5 hash to sort names kjournald starting. Commit interval 5 seconds EXT3 FS on sda7, internal journal EXT3-fs: mounted filesystem with writeback data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with writeback data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda9, internal journal EXT3-fs: mounted filesystem with writeback data mode. fuse init (API version 7.12) Adding 1959920k swap on /dev/sda2. Priority:-1 extents:1 across:1959920k NET: Registered protocol family 10 hdb: command error: status=0x51 { DriveReady SeekComplete Error } hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } hdb: possibly failed opcode: 0xa0 end_request: I/O error, dev hdb, sector 237072 Buffer I/O error on device hdb, logical block 29634 hdb: command error: status=0x51 { DriveReady SeekComplete Error } hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } hdb: possibly failed opcode: 0xa0 end_request: I/O error, dev hdb, sector 237072 Buffer I/O error on device hdb, logical block 29634 hdb: command error: status=0x51 { DriveReady SeekComplete Error } hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } hdb: possibly failed opcode: 0xa0 end_request: I/O error, dev hdb, sector 237072 Buffer I/O error on device hdb, logical block 29634 hdb: command error: status=0x51 { DriveReady SeekComplete Error } hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } hdb: possibly failed opcode: 0xa0 end_request: I/O error, dev hdb, sector 237072 Buffer I/O error on device hdb, logical block 29634 hdb: command error: status=0x51 { DriveReady SeekComplete Error } hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } hdb: possibly failed opcode: 0xa0 end_request: I/O error, dev hdb, sector 237072 Buffer I/O error on device hdb, logical block 29634 hdb: command error: status=0x51 { DriveReady SeekComplete Error } hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } hdb: possibly failed opcode: 0xa0 end_request: I/O error, dev hdb, sector 237072 Buffer I/O error on device hdb, logical block 29634 hdb: command error: status=0x51 { DriveReady SeekComplete Error } hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } hdb: possibly failed opcode: 0xa0 end_request: I/O error, dev hdb, sector 237072 Buffer I/O error on device hdb, logical block 29634 hdb: command error: status=0x51 { DriveReady SeekComplete Error } hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } hdb: possibly failed opcode: 0xa0 end_request: I/O error, dev hdb, sector 237072 Buffer I/O error on device hdb, logical block 29634 hdb: command error: status=0x51 { DriveReady SeekComplete Error } hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } hdb: possibly failed opcode: 0xa0 end_request: I/O error, dev hdb, sector 237072 Buffer I/O error on device hdb, logical block 29634 w83627ehf: Found W83627EHG chip at 0xa10 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period Clocksource tsc unstable (delta = -114894004 ns) ACPI: 'PS2M' and 'PS2K' have the same GPE, can't disable/enable one seperately ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [drm] Module unloaded [drm] Initialized drm 1.1.0 20060810 [drm] Module unloaded nvidiafb: Device ID: 10de0641 nvidiafb: unknown NV_ARCH [drm] Initialized drm 1.1.0 20060810 nouveau 0000:05:00.0: setting latency timer to 64 [drm] nouveau 0000:05:00.0: Detected an NV50 generation card (0x096080c1) [drm] nouveau 0000:05:00.0: Attempting to load BIOS image from PRAMIN [drm] nouveau 0000:05:00.0: ... appears to be valid [drm] nouveau 0000:05:00.0: BIT BIOS found [drm] nouveau 0000:05:00.0: Bios version 62.94.28.00 [drm] nouveau 0000:05:00.0: TMDS table revision 2.0 not currently supported [drm] nouveau 0000:05:00.0: Found Display Configuration Block version 4.0 [drm] nouveau 0000:05:00.0: DCB connector table: VHER 0x40 5 16 4 [drm] nouveau 0000:05:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07 [drm] nouveau 0000:05:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08 [drm] nouveau 0000:05:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff [drm] nouveau 0000:05:00.0: 3: 0x00000211: type 0x11 idx 2 tag 0xff [drm] nouveau 0000:05:00.0: 4: 0x00000213: type 0x13 idx 2 tag 0xff [drm] nouveau 0000:05:00.0: Raw DCB entry 0: 02000300 00000028 [drm] nouveau 0000:05:00.0: Raw DCB entry 1: 01000302 00020030 [drm] nouveau 0000:05:00.0: Raw DCB entry 2: 04011310 00000028 [drm] nouveau 0000:05:00.0: Raw DCB entry 3: 02011312 00020030 [drm] nouveau 0000:05:00.0: Raw DCB entry 4: 010223f1 00c0c080 [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 0 at offset 0xD0BE [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 1 at offset 0xD4D3 [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 2 at offset 0xE4C4 [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 3 at offset 0xE60D [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 4 at offset 0xE849 [drm] nouveau 0000:05:00.0: Parsing VBIOS init table at offset 0xE8AE [drm] nouveau 0000:05:00.0: 0xE8AE: Condition still not met after 20ms, skipping following opcodes [drm] nouveau 0000:05:00.0: 0xC090: parsing output script 0 [drm] nouveau 0000:05:00.0: 0xC090: parsing output script 0 [drm] nouveau 0000:05:00.0: 0xAB1C: parsing output script 0 [TTM] Zone kernel: Available graphics memory: 2028382 kiB. [drm] nouveau 0000:05:00.0: 512 MiB VRAM [drm] nouveau 0000:05:00.0: 512 MiB GART (aperture) [drm] nouveau 0000:05:00.0: Allocating FIFO number 1 [drm] nouveau 0000:05:00.0: nouveau_channel_alloc: initialised FIFO 1 [drm] nouveau 0000:05:00.0: Detected a DAC output [drm] nouveau 0000:05:00.0: Detected a TMDS output [drm] nouveau 0000:05:00.0: Detected a DAC output [drm] nouveau 0000:05:00.0: Detected a TMDS output [drm] nouveau 0000:05:00.0: DCB encoder 1 unknown [drm] nouveau 0000:05:00.0: Detected a DVI-I connector [drm] nouveau 0000:05:00.0: Detected a DVI-I connector [drm] nouveau 0000:05:00.0: allocated 1680x1050 fb: 0x40250000, bo ffff88012a018000 [drm] TMDS-8: set mode 1680x1050 25 [drm] nouveau 0000:05:00.0: 0xC0AE: parsing output script 1 [drm] nouveau 0000:05:00.0: 0xC0AF: parsing output script 2 [drm] nouveau 0000:05:00.0: 0xBDA1: parsing clock script 0 [drm] nouveau 0000:05:00.0: 0xB6D6: parsing clock script 1 Console: switching to colour frame buffer device 210x131 fb0: nouveaufb frame buffer device registered panic notifier [drm] Initialized nouveau 0.0.15 91f44d691472ce505bec75cc26e3b185b1556cc7 for 0000:05:00.0 on minor 0 [drm] nouveau 0000:05:00.0: Allocating FIFO number 2 [drm] nouveau 0000:05:00.0: nouveau_channel_alloc: initialised FIFO 2 [drm] nouveau 0000:05:00.0: PGRAPH_ERROR - nSource: PROTECTION_ERROR DMA_R_PROTECTION, nStatus: [drm] nouveau 0000:05:00.0: PGRAPH_ERROR - Ch 2/4 Class 0x8297 Mthd 0x15e0 Data 0x00000000:0x00000000 [drm] nouveau 0000:05:00.0: magic set 1: [drm] nouveau 0000:05:00.0: 0x00408900: 0x80000000 [drm] nouveau 0000:05:00.0: 0x00408904: 0xd87b3f69 [drm] nouveau 0000:05:00.0: 0x00408908: 0x7bf38fee [drm] nouveau 0000:05:00.0: 0x0040890c: 0x0000f58a [drm] nouveau 0000:05:00.0: 0x00408910: 0xfff436eb [drm] nouveau 0000:05:00.0: 0x00408e08: 0x80000000 [drm] nouveau 0000:05:00.0: 0x00408e0c: 0x00000000 [drm] nouveau 0000:05:00.0: 0x00408e10: 0x00000000 [drm] nouveau 0000:05:00.0: 0x00408e14: 0x00000000 [drm] nouveau 0000:05:00.0: 0x00408e18: 0x00000000 [drm] nouveau 0000:05:00.0: 0x00408e1c: 0x00000000 [drm] nouveau 0000:05:00.0: 0x00408e20: 0x00000000 [drm] nouveau 0000:05:00.0: 0x00408e24: 0x00000000 [drm] nouveau 0000:05:00.0: magic set 2: [drm] nouveau 0000:05:00.0: 0x00409900: 0x00000000 [drm] nouveau 0000:05:00.0: 0x00409904: 0x00000000 [drm] nouveau 0000:05:00.0: 0x00409908: 0x00000000 [drm] nouveau 0000:05:00.0: 0x0040990c: 0x00000000 [drm] nouveau 0000:05:00.0: 0x00409910: 0x00000000 [drm] nouveau 0000:05:00.0: 0x00409e08: 0x00000000 [drm] nouveau 0000:05:00.0: 0x00409e0c: 0x00000000 [drm] nouveau 0000:05:00.0: 0x00409e10: 0x00000000 [drm] nouveau 0000:05:00.0: 0x00409e14: 0x00000000 [drm] nouveau 0000:05:00.0: 0x00409e18: 0x00000000 [drm] nouveau 0000:05:00.0: 0x00409e1c: 0x00000000 [drm] nouveau 0000:05:00.0: 0x00409e20: 0x00000000 [drm] nouveau 0000:05:00.0: 0x00409e24: 0x00000000 [drm] nouveau 0000:05:00.0: Allocating FIFO number 3 [drm] nouveau 0000:05:00.0: nouveau_channel_alloc: initialised FIFO 3 hdb: command error: status=0x51 { DriveReady SeekComplete Error } hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } hdb: possibly failed opcode: 0xa0 end_request: I/O error, dev hdb, sector 237072 Buffer I/O error on device hdb, logical block 29634 hdb: command error: status=0x51 { DriveReady SeekComplete Error } hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } hdb: possibly failed opcode: 0xa0 end_request: I/O error, dev hdb, sector 237072 Buffer I/O error on device hdb, logical block 29634 hdb: command error: status=0x51 { DriveReady SeekComplete Error } hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } hdb: possibly failed opcode: 0xa0 end_request: I/O error, dev hdb, sector 237072 Buffer I/O error on device hdb, logical block 29634 hdb: command error: status=0x51 { DriveReady SeekComplete Error } hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } hdb: possibly failed opcode: 0xa0 end_request: I/O error, dev hdb, sector 237072 Buffer I/O error on device hdb, logical block 29634 hdb: command error: status=0x51 { DriveReady SeekComplete Error } hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } hdb: possibly failed opcode: 0xa0 end_request: I/O error, dev hdb, sector 237072 Buffer I/O error on device hdb, logical block 29634 hdb: command error: status=0x51 { DriveReady SeekComplete Error } hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } hdb: possibly failed opcode: 0xa0 end_request: I/O error, dev hdb, sector 237072 Buffer I/O error on device hdb, logical block 29634 hdb: command error: status=0x51 { DriveReady SeekComplete Error } hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } hdb: possibly failed opcode: 0xa0 end_request: I/O error, dev hdb, sector 237072 Buffer I/O error on device hdb, logical block 29634 hdb: command error: status=0x51 { DriveReady SeekComplete Error } hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } hdb: possibly failed opcode: 0xa0 end_request: I/O error, dev hdb, sector 237072 Buffer I/O error on device hdb, logical block 29634 hdb: command error: status=0x51 { DriveReady SeekComplete Error } hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } hdb: possibly failed opcode: 0xa0 end_request: I/O error, dev hdb, sector 237072 Buffer I/O error on device hdb, logical block 29634 hdb: command error: status=0x51 { DriveReady SeekComplete Error } hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } hdb: possibly failed opcode: 0xa0 end_request: I/O error, dev hdb, sector 237072 Buffer I/O error on device hdb, logical block 29634 hdb: command error: status=0x51 { DriveReady SeekComplete Error } hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } hdb: possibly failed opcode: 0xa0 end_request: I/O error, dev hdb, sector 237072 Buffer I/O error on device hdb, logical block 29634 hdb: command error: status=0x51 { DriveReady SeekComplete Error } hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } hdb: possibly failed opcode: 0xa0 end_request: I/O error, dev hdb, sector 237072 Buffer I/O error on device hdb, logical block 29634 hdb: command error: status=0x51 { DriveReady SeekComplete Error } hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } hdb: possibly failed opcode: 0xa0 end_request: I/O error, dev hdb, sector 237072 Buffer I/O error on device hdb, logical block 29634 hdb: command error: status=0x51 { DriveReady SeekComplete Error } hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } hdb: possibly failed opcode: 0xa0 end_request: I/O error, dev hdb, sector 237072 Buffer I/O error on device hdb, logical block 29634 hdb: command error: status=0x51 { DriveReady SeekComplete Error } hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } hdb: possibly failed opcode: 0xa0 end_request: I/O error, dev hdb, sector 237072 Buffer I/O error on device hdb, logical block 29634 hdb: command error: status=0x51 { DriveReady SeekComplete Error } hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } hdb: possibly failed opcode: 0xa0 end_request: I/O error, dev hdb, sector 237072 Buffer I/O error on device hdb, logical block 29634 hdb: command error: status=0x51 { DriveReady SeekComplete Error } hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } hdb: possibly failed opcode: 0xa0 end_request: I/O error, dev hdb, sector 237072 Buffer I/O error on device hdb, logical block 29634 hdb: command error: status=0x51 { DriveReady SeekComplete Error } hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } hdb: possibly failed opcode: 0xa0 end_request: I/O error, dev hdb, sector 237072 Buffer I/O error on device hdb, logical block 29634 CPU 1 is now offline SMP alternatives: switching to UP code usbcore: deregistering interface driver usbhid usbcore: deregistering interface driver hiddev PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.03 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. Suspending console(s) (use no_console_suspend to debug) sd 1:0:0:0: [sda] Synchronizing SCSI cache sd 1:0:0:0: [sda] Stopping disk ACPI handle has no context! serial 00:05: disabled [drm] nouveau 0000:05:00.0: Evicting buffers... [drm] nouveau 0000:05:00.0: Idling channels... [drm] nouveau 0000:05:00.0: Suspending GPU objects... [drm] nouveau 0000:05:00.0: And we're gone! EMU10K1_Audigy 0000:01:09.0: PCI INT A disabled ACPI handle has no context! forcedeth 0000:00:0a.0: PME# enabled forcedeth 0000:00:0a.0: wake-up capability enabled by ACPI forcedeth 0000:00:0a.0: PCI INT A disabled sata_nv 0000:00:07.0: PCI INT A disabled ehci_hcd 0000:00:02.1: PCI INT B disabled ohci_hcd 0000:00:02.0: PCI INT A disabled ehci_hcd 0000:00:02.1: PME# disabled ohci_hcd 0000:00:02.0: PME# disabled ACPI: Preparing to enter system sleep state S3 Disabling non-boot CPUs ... Back to C! PCI-DMA: Resuming GART IOMMU PCI-DMA: Restoring GART aperture settings Force enabled HPET at resume ACPI: Waking up from system sleep state S3 nForce2_smbus 0000:00:01.1: restoring config space at offset 0xb (was 0xcb8410de, writing 0x73101462) ohci_hcd 0000:00:02.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003) ohci_hcd 0000:00:02.0: PME# disabled ehci_hcd 0000:00:02.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002) ehci_hcd 0000:00:02.1: PME# disabled forcedeth 0000:00:0a.0: restoring config space at offset 0xf (was 0x14010100, writing 0x14010107) forcedeth 0000:00:0a.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb80007) pcieport-driver 0000:00:0b.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404) pci 0000:00:00.0: Found enabled HT MSI Mapping pcieport-driver 0000:00:0b.0: Linking AER extended capability pcieport-driver 0000:00:0c.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404) pci 0000:00:00.0: Found enabled HT MSI Mapping pcieport-driver 0000:00:0c.0: Linking AER extended capability pcieport-driver 0000:00:0d.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404) pci 0000:00:00.0: Found enabled HT MSI Mapping pcieport-driver 0000:00:0d.0: Linking AER extended capability pcieport-driver 0000:00:0e.0: restoring config space at offset 0x7 (was 0x2000e1e1, writing 0xe1e1) pcieport-driver 0000:00:0e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) pci 0000:00:00.0: Found enabled HT MSI Mapping pcieport-driver 0000:00:0e.0: Linking AER extended capability EMU10K1_Audigy 0000:01:09.0: restoring config space at offset 0x1 (was 0x2900105, writing 0x2900101) Emu10k1_gameport 0000:01:09.1: restoring config space at offset 0x1 (was 0x2900105, writing 0x2900101) nouveau 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) nForce2_smbus 0000:00:01.1: PME# disabled ohci_hcd 0000:00:02.0: PME# disabled ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20 ohci_hcd 0000:00:02.0: setting latency timer to 64 ehci_hcd 0000:00:02.1: PME# disabled ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:02.1: setting latency timer to 64 AMD_IDE 0000:00:06.0: setting latency timer to 64 sata_nv 0000:00:07.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 sata_nv 0000:00:07.0: setting latency timer to 64 pci 0000:00:09.0: setting latency timer to 64 forcedeth 0000:00:0a.0: wake-up capability disabled by ACPI forcedeth 0000:00:0a.0: PME# disabled eth0: no link during initialization. EMU10K1_Audigy 0000:01:09.0: PCI INT A -> Link[LNKD] -> GSI 19 (level, low) -> IRQ 19 Emu10k1_gameport 0000:01:09.1: PME# disabled [drm] nouveau 0000:05:00.0: We're back, enabling device... nouveau 0000:05:00.0: setting latency timer to 64 [drm] nouveau 0000:05:00.0: POSTing device... [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 0 at offset 0xD0BE [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 1 at offset 0xD4D3 [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 2 at offset 0xE4C4 [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 3 at offset 0xE60D [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 4 at offset 0xE849 [drm] nouveau 0000:05:00.0: Parsing VBIOS init table at offset 0xE8AE [drm] nouveau 0000:05:00.0: 0xC090: parsing output script 0 [drm] nouveau 0000:05:00.0: 0xC090: parsing output script 0 [drm] nouveau 0000:05:00.0: 0xAB1C: parsing output script 0 [drm] nouveau 0000:05:00.0: Reinitialising engines... [drm] nouveau 0000:05:00.0: Restoring GPU objects... [drm] nouveau 0000:05:00.0: Restoring mode... [drm] TMDS-8: set mode 1680x1050 25 [drm] nouveau 0000:05:00.0: 0xC0AE: parsing output script 1 [drm] nouveau 0000:05:00.0: 0xC0AF: parsing output script 2 [drm] nouveau 0000:05:00.0: 0xBDA1: parsing clock script 0 [drm] nouveau 0000:05:00.0: 0xB6D6: parsing clock script 1 serial 00:05: activated ata1: SATA link down (SStatus 0 SControl 300) eth0: link up. hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/100 mode selected hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hdb: UDMA/33 mode selected sd 1:0:0:0: [sda] Starting disk ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ACPI cmd ef/03:46:00:00:00:a0 filtered out ata2.00: ACPI cmd f5/00:00:00:00:00:00 filtered out ata2.00: configured for UDMA/133 sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:08:43:bf:91/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:00:00:00/00:00:00:00:00/e0 Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:08:43:bf:91/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:08:43:bf:91/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:08:43:bf:91/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:08:43:bf:91/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:08:43:bf:91/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 sd 1:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08 sd 1:0:0:0: [sda] Sense Key : 0xb [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 0a 38 60 2f sd 1:0:0:0: [sda] ASC=0x0 ASCQ=0x0 end_request: I/O error, dev sda, sector 9551683 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 8192 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:10:4b:bf:91/00:00:00:00:00/e0 tag 0 dma 8192 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 8192 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:10:4b:bf:91/00:00:00:00:00/e0 tag 0 dma 8192 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 8192 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:10:4b:bf:91/00:00:00:00:00/e0 tag 0 dma 8192 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 8192 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:10:4b:bf:91/00:00:00:00:00/e0 tag 0 dma 8192 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } Restarting tasks ... done. SMP alternatives: switching to SMP code ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 8192 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:10:4b:bf:91/00:00:00:00:00/e0 tag 0 dma 8192 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 8192 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:10:4b:bf:91/00:00:00:00:00/e0 tag 0 dma 8192 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } Booting processor 1 APIC 0x1 ip 0x6000 ata2.00: configured for UDMA/133 sd 1:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08 sd 1:0:0:0: [sda] Sense Key : 0xb [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 0a 38 60 2f sd 1:0:0:0: [sda] ASC=0x0 ASCQ=0x0 end_request: I/O error, dev sda, sector 9551691 ata2: EH complete Aborting journal on device sda3. sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:08:3b:97:91/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } EXT3-fs error (device sda3) in ext3_reserve_inode_write: Journal has aborted Initializing CPU#1 ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:08:3b:97:91/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:08:3b:97:91/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:08:3b:97:91/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:08:3b:97:91/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:08:3b:97:91/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } Calibrating delay using timer specific routine.. 6000.22 BogoMIPS (lpj=3000111) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 mce: CPU supports 5 MCE banks CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03 ata2.00: configured for UDMA/133 sd 1:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08 sd 1:0:0:0: [sda] Sense Key : 0xb [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 0a 38 60 2f sd 1:0:0:0: [sda] ASC=0x0 ASCQ=0x0 end_request: I/O error, dev sda, sector 9541435 Buffer I/O error on device sda3, logical block 688640 lost page write due to I/O error on sda3 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:08:3b:87:3d/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } Switched to high resolution mode on CPU 1 ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:08:3b:87:3d/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } usbcore: registered new interface driver hiddev ohci_hcd 0000:00:02.0: PCI-DMA: Out of IOMMU space for 8 bytes ohci_hcd 0000:00:02.0: PCI-DMA: Out of IOMMU space for 8 bytes ohci_hcd 0000:00:02.0: PCI-DMA: Out of IOMMU space for 68 bytes ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:08:3b:87:3d/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ohci_hcd 0000:00:02.0: PCI-DMA: Out of IOMMU space for 8 bytes ohci_hcd 0000:00:02.0: PCI-DMA: Out of IOMMU space for 68 bytes ohci_hcd 0000:00:02.0: PCI-DMA: Out of IOMMU space for 8 bytes ohci_hcd 0000:00:02.0: PCI-DMA: Out of IOMMU space for 68 bytes ohci_hcd 0000:00:02.0: PCI-DMA: Out of IOMMU space for 8 bytes ohci_hcd 0000:00:02.0: PCI-DMA: Out of IOMMU space for 68 bytes generic-usb: probe of 0003:046D:C00C.0002 failed with error -32 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:08:3b:87:3d/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ext3_abort called. EXT3-fs error (device sda3): ext3_journal_start_sb: Detected aborted journal Remounting filesystem read-only ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:08:3b:87:3d/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:08:3b:87:3d/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 sd 1:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08 sd 1:0:0:0: [sda] Sense Key : 0xb [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 0a 38 60 2f sd 1:0:0:0: [sda] ASC=0x0 ASCQ=0x0 end_request: I/O error, dev sda, sector 4032315 Buffer I/O error on device sda3, logical block 0 lost page write due to I/O error on sda3 ata2: EH complete i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000 i2c-adapter i2c-1: nForce2 SMBus adapter at 0x6000 w83627ehf: Found W83627EHG chip at 0xa10 k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 8192 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:10:b4:cb:f0/00:00:00:00:00/e0 tag 0 dma 8192 out res 50/00:00:1a:8b:a3/00:00:00:00:00/e0 Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 8192 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:10:b4:cb:f0/00:00:00:00:00/e0 tag 0 dma 8192 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 8192 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:10:b4:cb:f0/00:00:00:00:00/e0 tag 0 dma 8192 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 8192 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:10:b4:cb:f0/00:00:00:00:00/e0 tag 0 dma 8192 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 8192 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:10:b4:cb:f0/00:00:00:00:00/e0 tag 0 dma 8192 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 8192 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:10:b4:cb:f0/00:00:00:00:00/e0 tag 0 dma 8192 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 sd 1:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08 sd 1:0:0:0: [sda] Sense Key : 0xb [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 0a 38 60 2f sd 1:0:0:0: [sda] ASC=0x0 ASCQ=0x0 end_request: I/O error, dev sda, sector 15780788 Buffer I/O error on device sda5, logical block 2620 lost page write due to I/O error on sda5 Buffer I/O error on device sda5, logical block 2621 lost page write due to I/O error on sda5 ata2: EH complete REISERFS abort (device sda5): Journal write error in flush_commit_list AMD_IDE 0000:00:06.0: PCI-DMA: Out of IOMMU space for 32 bytes AMD_IDE 0000:00:06.0: PCI-DMA: Out of IOMMU space for 4096 bytes AMD_IDE 0000:00:06.0: PCI-DMA: Out of IOMMU space for 32 bytes AMD_IDE 0000:00:06.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:08:b3:9b:83/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:08:b3:9b:83/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:08:b3:9b:83/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:08:b3:9b:83/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:08:b3:9b:83/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:08:b3:9b:83/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 sd 1:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08 sd 1:0:0:0: [sda] Sense Key : 0xb [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 0a 38 60 2f sd 1:0:0:0: [sda] ASC=0x0 ASCQ=0x0 end_request: I/O error, dev sda, sector 8625075 Buffer I/O error on device sda3, logical block 574095 lost page write due to I/O error on sda3 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:08:1b:ce:83/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:08:1b:ce:83/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:08:1b:ce:83/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:08:1b:ce:83/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:08:1b:ce:83/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:08:1b:ce:83/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 sd 1:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08 sd 1:0:0:0: [sda] Sense Key : 0xb [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 0a 38 60 2f sd 1:0:0:0: [sda] ASC=0x0 ASCQ=0x0 end_request: I/O error, dev sda, sector 8637979 Buffer I/O error on device sda3, logical block 575708 lost page write due to I/O error on sda3 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:08:eb:55:84/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:08:eb:55:84/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:08:eb:55:84/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:08:eb:55:84/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:08:eb:55:84/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:08:eb:55:84/00:00:00:00:00/e0 tag 0 dma 4096 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 sd 1:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08 sd 1:0:0:0: [sda] Sense Key : 0xb [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 0a 38 60 2f sd 1:0:0:0: [sda] ASC=0x0 ASCQ=0x0 end_request: I/O error, dev sda, sector 8672747 Buffer I/O error on device sda3, logical block 580054 lost page write due to I/O error on sda3 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 20480 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:28:f4:31:c3/00:00:00:00:00/e6 tag 0 dma 20480 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 20480 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:28:f4:31:c3/00:00:00:00:00/e6 tag 0 dma 20480 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 20480 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:28:f4:31:c3/00:00:00:00:00/e6 tag 0 dma 20480 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 20480 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:28:f4:31:c3/00:00:00:00:00/e6 tag 0 dma 20480 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 20480 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:28:f4:31:c3/00:00:00:00:00/e6 tag 0 dma 20480 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 20480 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd ca/00:28:f4:31:c3/00:00:00:00:00/e6 tag 0 dma 20480 out res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 sd 1:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08 sd 1:0:0:0: [sda] Sense Key : 0xb [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 0a 38 60 2f sd 1:0:0:0: [sda] ASC=0x0 ASCQ=0x0 end_request: I/O error, dev sda, sector 113455604 Aborting journal on device sda6. ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 16384 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd c8/00:20:b3:89:8e/00:00:00:00:00/e0 tag 0 dma 16384 in res 50/00:00:49:1f:c0/00:00:00:00:00/ed Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 16384 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd c8/00:20:b3:89:8e/00:00:00:00:00/e0 tag 0 dma 16384 in res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 16384 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd c8/00:20:b3:89:8e/00:00:00:00:00/e0 tag 0 dma 16384 in res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 16384 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd c8/00:20:b3:89:8e/00:00:00:00:00/e0 tag 0 dma 16384 in res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 16384 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd c8/00:20:b3:89:8e/00:00:00:00:00/e0 tag 0 dma 16384 in res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 16384 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd c8/00:20:b3:89:8e/00:00:00:00:00/e0 tag 0 dma 16384 in res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 sd 1:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08 sd 1:0:0:0: [sda] Sense Key : 0xb [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 0a 38 60 2f sd 1:0:0:0: [sda] ASC=0x0 ASCQ=0x0 end_request: I/O error, dev sda, sector 9341363 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 24576 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd c8/00:30:e3:89:8e/00:00:00:00:00/e0 tag 0 dma 24576 in res 50/00:00:ba:89:8e/00:00:00:00:00/e0 Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 24576 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd c8/00:30:e3:89:8e/00:00:00:00:00/e0 tag 0 dma 24576 in res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 24576 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd c8/00:30:e3:89:8e/00:00:00:00:00/e0 tag 0 dma 24576 in res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 24576 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd c8/00:30:e3:89:8e/00:00:00:00:00/e0 tag 0 dma 24576 in res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 24576 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd c8/00:30:e3:89:8e/00:00:00:00:00/e0 tag 0 dma 24576 in res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 24576 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd c8/00:30:e3:89:8e/00:00:00:00:00/e0 tag 0 dma 24576 in res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 sd 1:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08 sd 1:0:0:0: [sda] Sense Key : 0xb [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 0a 38 60 2f sd 1:0:0:0: [sda] ASC=0x0 ASCQ=0x0 end_request: I/O error, dev sda, sector 9341411 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 45056 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd c8/00:58:1b:8a:8e/00:00:00:00:00/e0 tag 0 dma 45056 in res 50/00:00:1a:8a:8e/00:00:00:00:00/e0 Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 45056 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd c8/00:58:1b:8a:8e/00:00:00:00:00/e0 tag 0 dma 45056 in res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 45056 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd c8/00:58:1b:8a:8e/00:00:00:00:00/e0 tag 0 dma 45056 in res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 45056 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd c8/00:58:1b:8a:8e/00:00:00:00:00/e0 tag 0 dma 45056 in res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 45056 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd c8/00:58:1b:8a:8e/00:00:00:00:00/e0 tag 0 dma 45056 in res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 ata2: EH complete sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 4096 bytes sata_nv 0000:00:07.0: PCI-DMA: Out of IOMMU space for 45056 bytes ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: cmd c8/00:58:1b:8a:8e/00:00:00:00:00/e0 tag 0 dma 45056 in res 50/00:00:2f:60:38/00:00:00:00:00/ea Emask 0x40 (internal error) ata2.00: status: { DRDY } ata2.00: configured for UDMA/133 sd 1:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08 sd 1:0:0:0: [sda] Sense Key : 0xb [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 0a 38 60 2f sd 1:0:0:0: [sda] ASC=0x0 ASCQ=0x0 end_request: I/O error, dev sda, sector 9341467 ata2: EH complete Hangcheck: hangcheck value past margin! ext3_abort called. EXT3-fs error (device sda6): ext3_journal_start_sb: Detected aborted journal Remounting filesystem read-only [drm] nouveau 0000:05:00.0: nouveau_channel_free: freeing fifo 3 ------------[ cut here ]------------ WARNING: at fs/notify/inotify/inotify_fsnotify.c:129 idr_callback+0x3e/0x62() Hardware name: MS-7310 inotify closing but id=0 for entry=ffff880113731a58 in group=ffff88012e93a0c0 still in idr. Probably leaking memory Modules linked in: k8temp w83627ehf i2c_nforce2 usbhid nouveau ttm drm_kms_helper drm nvidiafb cfbcopyarea vgastate cfbimgblt cfbfillrect xt_tcpudp iptable_filter ipt_addrtype xt_dscp xt_string xt_multiport xt_mark xt_hashlimit xt_conntrack xt_connmark xt_NFQUEUE xt_MARK xt_CONNMARK nf_conntrack ip_tables x_tables cpufreq_ondemand nfsd exportfs hwmon_vid ipv6 fuse nls_iso8859_1 nls_cp437 vboxnetadp vboxnetflt vboxdrv powernow_k8 freq_table ohci_hcd ide_cd_mod ehci_hcd forcedeth cdrom emu10k1_gp usbcore gameport processor thermal [last unloaded: i2c_nforce2] Pid: 4365, comm: gam_server Tainted: P W 2.6.31-gentoo-r6-nyx #4 Call Trace: [] warn_slowpath_common+0x77/0x8f [] warn_slowpath_fmt+0x3c/0x3e [] ? wait_for_common+0x118/0x133 [] idr_callback+0x3e/0x62 [] idr_for_each+0x69/0xad [] ? idr_callback+0x0/0x62 [] ? fsnotify_put_event+0x51/0x55 [] inotify_free_group_priv+0x22/0x36 [] fsnotify_final_destroy_group+0x23/0x2f [] fsnotify_put_group+0x8c/0x90 [] inotify_release+0x25/0x32 [] __fput+0xf9/0x1b8 [] fput+0x15/0x17 [] filp_close+0x63/0x6d [] put_files_struct+0x65/0xb3 [] exit_files+0x46/0x4f [] do_exit+0x1a9/0x622 [] ? up_read+0x9/0xb [] ? do_page_fault+0x2c7/0x2f4 [] do_group_exit+0x73/0xa0 [] sys_exit_group+0x12/0x16 [] system_call_fastpath+0x16/0x1b ---[ end trace 4eaa2a86a8e2da24 ]--- entry->group=(null) inode=(null) wd=4096