Linux version 2.6.32-desktop-1mnb (herton@n2.mandriva.com) (gcc version 4.4.2 (GCC) ) #1 SMP Sat Dec 12 23:14:00 EST 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000009ff30000 (usable) BIOS-e820: 000000009ff30000 - 000000009ff40000 (ACPI data) BIOS-e820: 000000009ff40000 - 000000009fff0000 (ACPI NVS) BIOS-e820: 000000009fff0000 - 00000000a0000000 (reserved) BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved) BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) DMI 2.3 present. last_pfn = 0x9ff30 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 080000000 mask FE0000000 write-back 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 00c00000 init_memory_mapping: 0000000000000000-00000000373fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037000000 page 2M 0037000000 - 00373fe000 page 4k kernel direct mapping tables up to 373fe000 @ 7000-d000 RAMDISK: 37b2f000 - 37fefe14 Allocated new RAMDISK: 0077b000 - 00c3be14 Move RAMDISK from 0000000037b2f000 - 0000000037fefe13 to 0077b000 - 00c3be13 ACPI: RSDP 000f59f0 00014 (v00 ACPIAM) ACPI: RSDT 9ff30000 00030 (v01 INTEL D865PERL 20030502 MSFT 00000097) ACPI: FACP 9ff30200 00081 (v02 INTEL D865PERL 20030502 MSFT 00000097) ACPI: DSDT 9ff30370 040FA (v01 INTEL D865PERL 00000006 MSFT 0100000D) ACPI: FACS 9ff40000 00040 ACPI: APIC 9ff30300 00068 (v01 INTEL D865PERL 20030502 MSFT 00000097) ACPI: WDDT 9ff34470 00040 (v01 INTEL OEMWDDT 00000001 MSFT 0100000D) ACPI: Local APIC address 0xfee00000 1675MB HIGHMEM available. 883MB LOWMEM available. mapped low ram: 0 - 373fe000 low ram: 0 - 373fe000 node 0 low ram: 00000000 - 373fe000 node 0 bootmap 00009000 - 0000fe80 (9 early reservations) ==> bootmem [0000000000 - 00373fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 00007764c4] TEXT DATA BSS ==> [0000100000 - 00007764c4] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #5 [0000777000 - 000077a143] BRK ==> [0000777000 - 000077a143] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] #7 [000077b000 - 0000c3be14] NEW RAMDISK ==> [000077b000 - 0000c3be14] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000] found SMP MP-table at [c00ff780] ff780 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000373fe HighMem 0x000373fe -> 0x0009ff30 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0009ff30 On node 0 totalpages: 655055 free_area_init_node: node 0, pgdat c061fba0, node_mem_map c1001000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3967 pages, LIFO batch:0 Normal zone: 1736 pages used for memmap Normal zone: 220470 pages, LIFO batch:31 HighMem zone: 3351 pages used for memmap HighMem zone: 425499 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000 PM: Registered nosave memory: 00000000000e6000 - 0000000000100000 Allocating PCI resources starting at a0000000 (gap: a0000000:5ecf0000) Booting paravirtualized kernel on bare hardware NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 14 pages/cpu @c2800000 s35416 r0 d21928 u2097152 pcpu-alloc: s35416 r0 d21928 u2097152 alloc=1*4194304 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 649936 Kernel command line: BOOT_IMAGE=desktop_2.6.32-1mnb root=UUID=0377c044-4829-11db-add1-67eccbf7a7bb resume=/dev/hdb5 splash=silent vga=788 PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Initializing HighMem for node 0 (000373fe:0009ff30) Memory: 2586200k/2620608k available (3306k kernel code, 32968k reserved, 2053k data, 520k init, 1715400k highmem) virtual kernel memory layout: fixmap : 0xffd55000 - 0xfffff000 (2728 kB) pkmap : 0xff400000 - 0xff800000 (4096 kB) vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) .init : 0xc063d000 - 0xc06bf000 ( 520 kB) .data : 0xc043a9ff - 0xc063c068 (2053 kB) .text : 0xc0100000 - 0xc043a9ff (3306 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. NR_IRQS:1280 Console: colour dummy device 80x25 console [tty0] enabled Fast TSC calibration using PIT Detected 2394.068 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.13 BogoMIPS (lpj=2394068) Security Framework initialized TOMOYO Linux initialized Mount-cache hash table entries: 512 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 4 MCE banks CPU0: Thermal monitoring enabled (TM1) Performance Events: no PMU driver, software events only. Checking 'hlt' instruction... OK. ACPI: Checking initramfs for custom DSDT ACPI: Core revision 20090903 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 16776 entries in 33 pages ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4787.00 BogoMIPS (lpj=2393503) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU1: Thermal monitoring enabled (TM1) CPU1: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (9575.14 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level SIBLING groups: 0 (cpu_power = 589) 1 (cpu_power = 589) domain 1: span 0-1 level MC groups: 0-1 (cpu_power = 1178) CPU1 attaching sched-domain: domain 0: span 0-1 level SIBLING groups: 1 (cpu_power = 589) 0 (cpu_power = 589) domain 1: span 0-1 level MC groups: 0-1 (cpu_power = 1178) devtmpfs: initialized Time: 8:42:54 Date: 12/16/09 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Executed 2 blocks of module-level executable AML code ACPI: Interpreter enabled ACPI: (supports S0 S1 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: Power Resource [URP1] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: Enabling MCH 'Overflow' Device pci 0000:00:00.0: reg 10 32bit mmio pref: [0xf8000000-0xfbffffff] pci 0000:00:06.0: reg 10 32bit mmio: [0xfecf0000-0xfecf0fff] pci 0000:00:1d.0: reg 20 io port: [0xcc00-0xcc1f] pci 0000:00:1d.1: reg 20 io port: [0xd000-0xd01f] pci 0000:00:1d.2: reg 20 io port: [0xd400-0xd41f] pci 0000:00:1d.3: reg 20 io port: [0xd800-0xd81f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xffaffc00-0xffafffff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH4 GPIO pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] pci 0000:00:1f.2: reg 10 io port: [0xec00-0xec07] pci 0000:00:1f.2: reg 14 io port: [0xe800-0xe803] pci 0000:00:1f.2: reg 18 io port: [0xe400-0xe407] pci 0000:00:1f.2: reg 1c io port: [0xe000-0xe003] pci 0000:00:1f.2: reg 20 io port: [0xdc00-0xdc0f] pci 0000:00:1f.3: reg 20 io port: [0xc800-0xc81f] pci 0000:00:1f.5: reg 18 32bit mmio: [0xffaff800-0xffaff9ff] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xffaff400-0xffaff4ff] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold pci 0000:00:1f.5: PME# disabled pci 0000:01:00.0: reg 10 32bit mmio pref: [0xe0000000-0xefffffff] pci 0000:01:00.0: reg 14 io port: [0xa800-0xa8ff] pci 0000:01:00.0: reg 18 32bit mmio: [0xff5f0000-0xff5fffff] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xff5c0000-0xff5dffff] pci 0000:01:00.0: supports D1 D2 pci 0000:00:01.0: bridge io port: [0xa000-0xafff] pci 0000:00:01.0: bridge 32bit mmio: [0xff500000-0xff5fffff] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd6a00000-0xf69fffff] pci 0000:02:04.0: reg 10 32bit mmio pref: [0xf6aff000-0xf6afffff] pci 0000:02:04.0: reg 14 io port: [0xbc00-0xbc1f] pci 0000:02:04.0: reg 18 32bit mmio: [0xff900000-0xff9fffff] pci 0000:02:04.0: reg 30 32bit mmio pref: [0xff800000-0xff8fffff] pci 0000:02:04.0: supports D1 D2 pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot pci 0000:02:04.0: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0xb000-0xbfff] pci 0000:00:1e.0: bridge 32bit mmio: [0xff600000-0xff9fffff] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xf6a00000-0xf6afffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled system 00:0a: ioport range 0x4d0-0x4d1 has been reserved system 00:0c: ioport range 0x400-0x47f has been reserved system 00:0c: ioport range 0x680-0x6ff has been reserved system 00:0c: ioport range 0x500-0x53f has been reserved system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0c: iomem range 0xfed20000-0xfed9ffff has been reserved system 00:0d: iomem range 0x0-0x9ffff could not be reserved system 00:0d: iomem range 0xc0000-0xdffff could not be reserved system 00:0d: iomem range 0xe0000-0xfffff could not be reserved system 00:0d: iomem range 0x100000-0x9fffffff could not be reserved pci 0000:02:04.0: BAR 6: address space collision on of device [0xff800000-0xff8fffff] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0xa000-0xafff pci 0000:00:01.0: MEM window: 0xff500000-0xff5fffff pci 0000:00:01.0: PREFETCH window: 0xd6a00000-0xf69fffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1e.0: IO window: 0xb000-0xbfff pci 0000:00:1e.0: MEM window: 0xff600000-0xff9fffff pci 0000:00:1e.0: PREFETCH window: 0xf6a00000-0xf6afffff pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:01: resource 0 io: [0xa000-0xafff] pci_bus 0000:01: resource 1 mem: [0xff500000-0xff5fffff] pci_bus 0000:01: resource 2 pref mem [0xd6a00000-0xf69fffff] pci_bus 0000:02: resource 0 io: [0xb000-0xbfff] pci_bus 0000:02: resource 1 mem: [0xff600000-0xff9fffff] pci_bus 0000:02: resource 2 pref mem [0xf6a00000-0xf6afffff] pci_bus 0000:02: resource 3 io: [0x00-0xffff] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:01:00.0: Boot video device pci 0000:02:04.0: Firmware left e100 interrupts enabled; disabling Trying to unpack rootfs image as initramfs... Freeing initrd memory: 4867k freed apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. audit: initializing netlink socket (disabled) type=2000 audit(1260952974.464:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1712 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) vesafb: framebuffer at 0xe0000000, mapped to 0xf7c80000, using 1875k, total 16384k vesafb: mode is 800x600x16, linelength=1600, pages=16 vesafb: protected mode interface info at c000:9ec0 vesafb: pmi: set display start = c00c9f62, set palette = c00ca020 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 100x37 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 865 Chipset agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice Driver 'rtc_cmos' needs updating - please use bus_type methods rtc_cmos 00:02: RTC can wake from S4 rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, 114 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered Using IPI No-Shortcut mode input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 PM: Checking image partition /dev/hdb5 PM: Resume from disk failed. registered taskstats version 1 Magic number: 5:769:725 pci 0000:01:00.0: hash matches rtc_cmos 00:02: setting system clock to 2009-12-16 08:42:55 UTC (1260952975) BIOS EDD facility v0.16 2004-Jun-25, 3 devices found Freeing unused kernel memory: 520k freed psmouse serio1: ID: 10 00 64 logips2pp: Detected unknown logitech mouse model 89 input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input1 SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem SCSI subsystem initialized libata version 3.00 loaded. ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe800 bmdma 0xdc00 irq 18 ata4: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xdc08 irq 18 ata3.00: ATA-7: WDC WD1600JS-55NCB1, 10.02E01, max UDMA/133 ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: ATA-6: WDC WD800JB-00ETA0, 77.07W77, max UDMA/100 ata1.00: 156301488 sectors, multi 16: LBA48 ata1.01: ATA-6: WDC WD800JB-00ETA0, 77.07W77, max UDMA/100 ata1.01: 156301488 sectors, multi 16: LBA48 ata3.00: configured for UDMA/133 ata1.00: configured for UDMA/100 ata1.01: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA WDC WD800JB-00ET 77.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 scsi 0:0:1:0: Direct-Access ATA WDC WD800JB-00ET 77.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sd 0:0:1:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) sda1 sda2 < sda5 > sd 0:0:1:0: [sdb] Write Protect is off sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] Attached SCSI disk sdb: sdb1 sdb2 < sdb5 > sdb3 sd 0:0:1:0: [sdb] Attached SCSI disk ata2.00: ATAPI: _NEC DVD_RW ND-2500A, 1.07, max UDMA/33 ata2.01: ATAPI: SONY CD-RW CRX300E, KYS1, max UDMA/33 ata2.00: configured for UDMA/33 ata2.01: configured for UDMA/33 scsi 1:0:0:0: CD-ROM _NEC DVD_RW ND-2500A 1.07 PQ: 0 ANSI: 5 scsi 1:0:1:0: CD-ROM SONY CD-RW CRX300E KYS1 PQ: 0 ANSI: 5 scsi 2:0:0:0: Direct-Access ATA WDC WD1600JS-55N 10.0 PQ: 0 ANSI: 5 sd 2:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sdc2 sdc3 < sdc5 sdc6 > sd 2:0:0:0: [sdc] Attached SCSI disk Uniform Multi-Platform E-IDE driver ide-gd driver 1.18 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports XFS mounting filesystem sdc1 Ending clean XFS mount for filesystem: sdc1 Tomoyo security MAC extension available but disabled by default. If you want to enable and use it, ccs-tools package must be installed. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb udev: starting version 147 uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000cc00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32-desktop-1mnb uhci_hcd usb usb1: SerialNumber: 0000:00:1d.0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d000 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32-desktop-1mnb uhci_hcd usb usb2: SerialNumber: 0000:00:1d.1 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d400 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.32-desktop-1mnb uhci_hcd usb usb3: SerialNumber: 0000:00:1d.2 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d800 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.32-desktop-1mnb uhci_hcd usb usb4: SerialNumber: 0000:00:1d.3 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:1:0: Attached scsi generic sg1 type 0 scsi 1:0:0:0: Attached scsi generic sg2 type 5 scsi 1:0:1:0: Attached scsi generic sg3 type 5 sd 2:0:0:0: Attached scsi generic sg4 type 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported sr1: scsi3-mmc drive: 0x/48x writer cd/rw xa/form2 cdda tray sr 1:0:1:0: Attached scsi CD-ROM sr1 input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button [PWRF] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffaffc00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: EHCI Host Controller usb usb5: Manufacturer: Linux 2.6.32-desktop-1mnb ehci_hcd usb usb5: SerialNumber: 0000:00:1d.7 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected iTCO_vendor_support: vendor-support=0 input: PC Speaker as /devices/platform/pcspkr/input/input4 processor LNXCPU:00: registered as cooling_device0 processor LNXCPU:01: registered as cooling_device1 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1) e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation e100 0000:02:04.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 e100 0000:02:04.0: PME# disabled e100: eth0: e100_probe: addr 0xf6aff000, irq 18, MAC addr 00:90:27:4f:06:1b Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Intel 82802 RNG detected i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 parport_pc 00:09: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] ppdev: user-space parallel port driver Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Intel ICH 0000:00:1f.5: setting latency timer to 64 intel8x0_measure_ac97_clock: measured 50031 usecs (2411 samples) intel8x0: clocking to 48000 p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com XFS mounting filesystem sdc2 Ending clean XFS mount for filesystem: sdc2 XFS mounting filesystem sdb3 Ending clean XFS mount for filesystem: sdb3 XFS mounting filesystem sdb1 Ending clean XFS mount for filesystem: sdb1 loop: module loaded Adding 1044184k swap on /dev/sdb5. Priority:-1 extents:1 across:1044184k vboxdrv: Trying to deactivate the NMI watchdog permanently... vboxdrv: Successfully done. vboxdrv: Found 2 processor cores. vboxdrv: fAsync=0 offMin=0x480 offMax=0x1164 vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. vboxdrv: Successfully loaded version 3.0.12_OSE (interface 0x00110000). NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready e100: eth0 NIC Link is Up 100 Mbps Full Duplex ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready NET: Registered protocol family 17 martian source 255.255.255.255 from 192.168.1.1, on dev eth0 ll header: ff:ff:ff:ff:ff:ff:00:14:a5:5f:47:8c:08:00 xfs[2129]: segfault at 0 ip b76d2340 sp bfe536e8 error 4 in libc-2.11.so[b765f000+15e000] eth0: no IPv6 routers present pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to userspace modesetting. [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0 agpgart-intel 0000:00:00.0: AGP 3.0 bridge agpgart: X tried to set rate=x12. Setting to AGP3 x8 mode. agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode pci 0000:01:00.0: putting AGP V3 device into 8x mode [drm] Setting GART location based on new memory map [drm] Loading RV630 CP Microcode platform r600_cp.0: firmware: requesting radeon/RV630_pfp.bin platform r600_cp.0: firmware: requesting radeon/RV630_me.bin [drm] Resetting GPU [drm] writeback test succeeded in 1 usecs imwheel[3144]: segfault at 11a ip 0804c932 sp bfc57bb0 error 4 in imwheel[8048000+e000] fuse init (API version 7.13) X:3023 freeing invalid memtype f8102000-f8112000 X:3023 freeing invalid memtype f8112000-f8122000 X:3023 freeing invalid memtype f8122000-f8132000 X:3023 freeing invalid memtype f8132000-f8142000 X:3023 freeing invalid memtype f8142000-f8152000 X:3023 freeing invalid memtype f8152000-f8162000 X:3023 freeing invalid memtype f8162000-f8172000 X:3023 freeing invalid memtype f8172000-f8182000 X:3023 freeing invalid memtype f8182000-f8192000 X:3023 freeing invalid memtype f8192000-f81a2000 X:3023 freeing invalid memtype f81a2000-f81b2000 X:3023 freeing invalid memtype f81b2000-f81c2000 X:3023 freeing invalid memtype f81c2000-f81d2000 X:3023 freeing invalid memtype f81d2000-f81e2000 X:3023 freeing invalid memtype f81e2000-f81f2000 X:3023 freeing invalid memtype f81f2000-f8202000 X:3023 freeing invalid memtype f8202000-f8212000 X:3023 freeing invalid memtype f8212000-f8222000 X:3023 freeing invalid memtype f8222000-f8232000 X:3023 freeing invalid memtype f8232000-f8242000 X:3023 freeing invalid memtype f8242000-f8252000 X:3023 freeing invalid memtype f8252000-f8262000 X:3023 freeing invalid memtype f8262000-f8272000 X:3023 freeing invalid memtype f8272000-f8282000 X:3023 freeing invalid memtype f8282000-f8292000 X:3023 freeing invalid memtype f8292000-f82a2000 X:3023 freeing invalid memtype f82a2000-f82b2000 X:3023 freeing invalid memtype f82b2000-f82c2000 X:3023 freeing invalid memtype f82c2000-f82d2000 X:3023 freeing invalid memtype f82d2000-f82e2000 X:3023 freeing invalid memtype f82e2000-f82f2000 X:3023 freeing invalid memtype f82f2000-f8302000 [drm] Resetting GPU X:3023 freeing invalid memtype f8102000-f8112000 X:3023 freeing invalid memtype f8112000-f8122000 X:3023 freeing invalid memtype f8122000-f8132000 X:3023 freeing invalid memtype f8132000-f8142000 X:3023 freeing invalid memtype f8142000-f8152000 X:3023 freeing invalid memtype f8152000-f8162000 X:3023 freeing invalid memtype f8162000-f8172000 X:3023 freeing invalid memtype f8172000-f8182000 X:3023 freeing invalid memtype f8182000-f8192000 X:3023 freeing invalid memtype f8192000-f81a2000 X:3023 freeing invalid memtype f81a2000-f81b2000 X:3023 freeing invalid memtype f81b2000-f81c2000 X:3023 freeing invalid memtype f81c2000-f81d2000 X:3023 freeing invalid memtype f81d2000-f81e2000 X:3023 freeing invalid memtype f81e2000-f81f2000 X:3023 freeing invalid memtype f81f2000-f8202000 X:3023 freeing invalid memtype f8202000-f8212000 X:3023 freeing invalid memtype f8212000-f8222000 X:3023 freeing invalid memtype f8222000-f8232000 X:3023 freeing invalid memtype f8232000-f8242000 X:3023 freeing invalid memtype f8242000-f8252000 X:3023 freeing invalid memtype f8252000-f8262000 X:3023 freeing invalid memtype f8262000-f8272000 X:3023 freeing invalid memtype f8272000-f8282000 X:3023 freeing invalid memtype f8282000-f8292000 X:3023 freeing invalid memtype f8292000-f82a2000 X:3023 freeing invalid memtype f82a2000-f82b2000 X:3023 freeing invalid memtype f82b2000-f82c2000 X:3023 freeing invalid memtype f82c2000-f82d2000 X:3023 freeing invalid memtype f82d2000-f82e2000 X:3023 freeing invalid memtype f82e2000-f82f2000 X:3023 freeing invalid memtype f82f2000-f8302000 agpgart-intel 0000:00:00.0: AGP 3.0 bridge agpgart: X tried to set rate=x12. Setting to AGP3 x8 mode. agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode pci 0000:01:00.0: putting AGP V3 device into 8x mode [drm] Setting GART location based on new memory map [drm] Loading RV630 CP Microcode platform r600_cp.0: firmware: requesting radeon/RV630_pfp.bin platform r600_cp.0: firmware: requesting radeon/RV630_me.bin [drm] Resetting GPU [drm] writeback test succeeded in 1 usecs imwheel[15802]: segfault at 11a ip 0804c932 sp bfc111c0 error 4 in imwheel[8048000+e000] [drm] Resetting GPU