Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32.2-15.fc13.x86_64 (mockbuild@x86-04.phx2.fedoraproject.org) (gcc version 4.4.2 20091222 (Red Hat 4.4.2-20) (GCC) ) #1 SMP Thu Dec 24 17:12:56 UTC 2009 Command line: ro root=/dev/mapper/vg_localhost_00-lv00 LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us io_delay=0xed KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000b7f00000 (usable) BIOS-e820: 00000000b7f00000 - 00000000b7f0a000 (ACPI data) BIOS-e820: 00000000b7f0a000 - 00000000b7f80000 (ACPI NVS) BIOS-e820: 00000000b7f80000 - 00000000c0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) DMI present. last_pfn = 0x140000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-D3FFF write-protect D4000-E3FFF uncachable E4000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0000000000 mask FF80000000 write-back 1 base 0080000000 mask FFE0000000 write-back 2 base 00A0000000 mask FFF0000000 write-back 3 base 00B0000000 mask FFF8000000 write-back 4 disabled 5 disabled 6 disabled 7 disabled TOM2: 0000000140000000 aka 5120M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000b8000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xb7f00 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000b7f00000 0000000000 - 00b7e00000 page 2M 00b7e00000 - 00b7f00000 page 4k kernel direct mapping tables up to b7f00000 @ 8000-d000 init_memory_mapping: 0000000100000000-0000000140000000 0100000000 - 0140000000 page 2M kernel direct mapping tables up to 140000000 @ b000-11000 RAMDISK: 3747a000 - 37fef9cf ACPI: RSDP 00000000000f8920 00014 (v00 HP ) ACPI: RSDT 00000000b7f00968 00040 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000) ACPI: FACP 00000000b7f09b16 00074 (v01 HP MCP51M 06040000 PTL_ 000F4240) ACPI: DSDT 00000000b7f009a8 0916E (v01 HP MCP51M 06040000 MSFT 03000000) ACPI: FACS 00000000b7f0afc0 00040 ACPI: SSDT 00000000b7f09b8a 00206 (v01 HP POWERNOW 06040000 LTP 00000001) ACPI: MCFG 00000000b7f09d90 0003C (v01 HP MCFG 06040000 LTP 00000000) ACPI: HPET 00000000b7f09dcc 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001) ACPI: APIC 00000000b7f09e04 0005E (v01 HP ? APIC 06040000 LTP 00000000) ACPI: BOOT 00000000b7f09e62 00028 (v01 HP $SBFTBL$ 06040000 LTP 00000001) ACPI: SLIC 00000000b7f09e8a 00176 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001) ACPI: Local APIC address 0xfee00000 Scanning NUMA topology in Northbridge 24 No NUMA configuration found Faking a node at 0000000000000000-0000000140000000 Bootmem setup node 0 0000000000000000-0000000140000000 NODE_DATA [000000000000c000 - 0000000000023fff] bootmap [0000000000024000 - 000000000004bfff] pages 28 (8 early reservations) ==> bootmem [0000000000 - 0140000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 00026736b8] TEXT DATA BSS ==> [0001000000 - 00026736b8] #3 [003747a000 - 0037fef9cf] RAMDISK ==> [003747a000 - 0037fef9cf] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000] #5 [0002674000 - 00026741a4] BRK ==> [0002674000 - 00026741a4] #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] #7 [000000b000 - 000000c000] PGTABLE ==> [000000b000 - 000000c000] found SMP MP-table at [ffff8800000f89e0] f89e0 [ffffea0000000000-ffffea00081fffff] PMD -> [ffff880002800000-ffff880008dfffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00140000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x0000009d 0: 0x00000100 -> 0x000b7f00 0: 0x00100000 -> 0x00140000 On node 0 totalpages: 1015453 DMA zone: 104 pages used for memmap DMA zone: 105 pages reserved DMA zone: 3788 pages, LIFO batch:0 DMA32 zone: 26520 pages used for memmap DMA32 zone: 722792 pages, LIFO batch:31 Normal zone: 6656 pages used for memmap Normal zone: 255488 pages, LIFO batch:31 Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x10de8201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009d000 - 000000000009e000 PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 PM: Registered nosave memory: 00000000000d2000 - 0000000000100000 PM: Registered nosave memory: 00000000b7f00000 - 00000000b7f0a000 PM: Registered nosave memory: 00000000b7f0a000 - 00000000b7f80000 PM: Registered nosave memory: 00000000b7f80000 - 00000000c0000000 PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 PM: Registered nosave memory: 00000000fee01000 - 00000000fff80000 PM: Registered nosave memory: 00000000fff80000 - 0000000100000000 Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) Booting paravirtualized kernel on bare hardware NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 478 pages/cpu @ffff880009000000 s1927192 r8192 d22504 u2097152 pcpu-alloc: s1927192 r8192 d22504 u2097152 alloc=1*2097152 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Node order, mobility grouping on. Total pages: 982068 Policy zone: Normal Kernel command line: ro root=/dev/mapper/vg_localhost_00-lv00 LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us io_delay=0xed PID hash table entries: 4096 (order: 3, 32768 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found Node 0: aperture @ 2844000000 size 32 MB Aperture beyond 4GB. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 20000000 PM: Registered nosave memory: 0000000020000000 - 0000000024000000 Memory: 3852096k/5242880k available (4645k kernel code, 1181068k absent, 209716k reserved, 3967k data, 2756k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:424 spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 ... CHAINHASH_SIZE: 16384 memory used by lock dependency info: 6367 kB per task-struct memory footprint: 2688 bytes allocated 40632320 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups ODEBUG: 10 of 10 active objects replaced hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Fast TSC calibration using PIT Detected 1994.398 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 3988.79 BogoMIPS (lpj=1994398) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0/0x0 -> Node 0 tseg: 00b7f80000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 5 MCE banks using C1E aware idle routine Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f ACPI: Core revision 20090903 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 23987 entries in 95 pages Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02 lockdep: fixing up alternatives. Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3988.86 BogoMIPS (lpj=1994433) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: System has AMD C1E enabled Switch to broadcast mode on CPU1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02 Brought up 2 CPUs Total of 2 processors activated (7977.66 BogoMIPS). sizeof(vma)=176 bytes sizeof(page)=104 bytes sizeof(inode)=1168 bytes sizeof(dentry)=256 bytes sizeof(ext3inode)=1592 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=9256 bytes CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 Switch to broadcast mode on CPU0 devtmpfs: initialized regulator: core version 0.5 Time: 18:58:46 Date: 12/29/09 NET: Registered protocol family 16 node 0 link 0: io port [1000, fffff] TOM: 00000000c0000000 aka 3072M node 0 link 0: mmio [e0000000, efffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [c0000000, fe0bffff] TOM2: 0000000140000000 aka 5120M bus: [00,ff] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [c0000000, ffffffff] bus: 00 index 2 mmio: [a0000, bffff] bus: 00 index 3 mmio: [140000000, fcffffffff] ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 6 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - e06fffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62 ACPI: ACPI Dock Station Driver: 1 docks/bays found ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:05.0: reg 10 32bit mmio: [0xc2000000-0xc2ffffff] pci 0000:00:05.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:00:05.0: reg 1c 64bit mmio: [0xc1000000-0xc1ffffff] pci 0000:00:05.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] pci 0000:00:0a.1: reg 20 io port: [0x3040-0x307f] pci 0000:00:0a.1: reg 24 io port: [0x3000-0x303f] pci 0000:00:0a.1: PME# supported from D3hot D3cold pci 0000:00:0a.1: PME# disabled pci 0000:00:0a.3: reg 10 32bit mmio: [0xc0040000-0xc007ffff] pci 0000:00:0b.0: reg 10 32bit mmio: [0xc0004000-0xc0004fff] pci 0000:00:0b.0: supports D1 D2 pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.0: PME# disabled pci 0000:00:0b.1: reg 10 32bit mmio: [0xc0005000-0xc00050ff] pci 0000:00:0b.1: supports D1 D2 pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.1: PME# disabled pci 0000:00:0d.0: reg 20 io port: [0x3080-0x308f] pci 0000:00:0e.0: reg 10 io port: [0x30b0-0x30b7] pci 0000:00:0e.0: reg 14 io port: [0x30a4-0x30a7] pci 0000:00:0e.0: reg 18 io port: [0x30a8-0x30af] pci 0000:00:0e.0: reg 1c io port: [0x30a0-0x30a3] pci 0000:00:0e.0: reg 20 io port: [0x3090-0x309f] pci 0000:00:0e.0: reg 24 32bit mmio: [0xc0006000-0xc0006fff] pci 0000:00:10.1: reg 10 32bit mmio: [0x000000-0x003fff] pci 0000:00:10.1: PME# supported from D3hot D3cold pci 0000:00:10.1: PME# disabled pci 0000:00:14.0: reg 10 32bit mmio: [0xc0007000-0xc0007fff] pci 0000:00:14.0: reg 14 io port: [0x30b8-0x30bf] pci 0000:00:14.0: supports D1 D2 pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:14.0: PME# disabled pci 0000:00:02.0: bridge io port: [0x4000-0x4fff] pci 0000:00:02.0: bridge 32bit mmio: [0xc4000000-0xc7ffffff] pci 0000:00:02.0: bridge 64bit mmio pref: [0xc9000000-0xc91fffff] pci 0000:03:00.0: reg 10 64bit mmio: [0xc8000000-0xc8003fff] pci 0000:03:00.0: supports D1 D2 pci 0000:00:03.0: bridge 32bit mmio: [0xc8000000-0xc8ffffff] pci 0000:00:10.0: transparent bridge ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LK1E] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [LK2E] (IRQs 16 17 20 22 23) *0, disabled. ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *10 ACPI: PCI Interrupt Link [LK4E] (IRQs 16 17 20 22 23) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 20 22 23) *10 ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 20 22 23) *11 ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 20 22 23) *11 ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 20 22 23) *7 ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 20 22 23) *11 ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 20 22 23) *0, disabled. ACPI: PCI Interrupt Link [LACI] (IRQs 16 17 20 22 23) *0, disabled. ACPI: PCI Interrupt Link [LMCI] (IRQs 16 17 20 22 23) *0, disabled. ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 20 22 23) *0, disabled. ACPI: PCI Interrupt Link [LTID] (IRQs 21) *5 ACPI: PCI Interrupt Link [LSI1] (IRQs 21) *0 vgaarb: device added: PCI:0000:00:05.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 hpet0: 3 comparators, 32-bit 25.000000 MHz counter Switching to clocksource hpet kstop/0 used greatest stack depth: 6424 bytes left pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered system 00:00: iomem range 0xe0000000-0xefffffff has been reserved system 00:01: iomem range 0xffc00000-0xffffffff could not be reserved system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved system 00:01: iomem range 0xfed00000-0xfed00fff has been reserved system 00:03: iomem range 0xe0000000-0xefffffff has been reserved system 00:04: ioport range 0x1000-0x107f has been reserved system 00:04: ioport range 0x1080-0x10ff has been reserved system 00:04: ioport range 0x1400-0x147f has been reserved system 00:04: ioport range 0x1480-0x14ff has been reserved system 00:04: ioport range 0x1800-0x187f has been reserved system 00:04: ioport range 0x1880-0x18ff has been reserved system 00:04: ioport range 0x2000-0x203f has been reserved system 00:05: ioport range 0x360-0x361 has been reserved system 00:05: ioport range 0x380-0x383 has been reserved system 00:05: ioport range 0x4d0-0x4d1 has been reserved pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 pci 0000:00:02.0: IO window: 0x4000-0x4fff pci 0000:00:02.0: MEM window: 0xc4000000-0xc7ffffff pci 0000:00:02.0: PREFETCH window: 0x000000c9000000-0x000000c91fffff pci 0000:00:03.0: PCI bridge, secondary bus 0000:03 pci 0000:00:03.0: IO window: disabled pci 0000:00:03.0: MEM window: 0xc8000000-0xc8ffffff pci 0000:00:03.0: PREFETCH window: disabled pci 0000:00:10.0: PCI bridge, secondary bus 0000:07 pci 0000:00:10.0: IO window: disabled pci 0000:00:10.0: MEM window: disabled pci 0000:00:10.0: PREFETCH window: disabled pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:03.0: setting latency timer to 64 pci 0000:00:10.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0x4000-0x4fff] pci_bus 0000:01: resource 1 mem: [0xc4000000-0xc7ffffff] pci_bus 0000:01: resource 2 pref mem [0xc9000000-0xc91fffff] pci_bus 0000:03: resource 1 mem: [0xc8000000-0xc8ffffff] pci_bus 0000:07: resource 3 io: [0x00-0xffff] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 10, 4718592 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:00:00.0: Found disabled HT MSI Mapping pci 0000:00:00.0: Enabling HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:05.0: Boot video device pci 0000:00:09.0: Found enabled HT MSI Mapping pci 0000:00:09.0: Found enabled HT MSI Mapping pci 0000:00:09.0: Found enabled HT MSI Mapping Trying to unpack rootfs image as initramfs... Freeing initrd memory: 11734k freed DMA-API: preallocated 32768 debug entries DMA-API: debugging enabled by kernel config PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 20000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture Simple Boot Flag at 0x36 set to 0x1 audit: initializing netlink socket (disabled) type=2000 audit(1262113126.605:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 7546 SELinux: Registering netfilter hooks cryptomgr_test used greatest stack depth: 5880 bytes left cryptomgr_test used greatest stack depth: 5688 bytes left alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) alloc irq_desc for 24 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:02.0: irq 24 for MSI/MSI-X pcieport 0000:00:02.0: setting latency timer to 64 alloc irq_desc for 25 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:03.0: irq 25 for MSI/MSI-X pcieport 0000:00:03.0: setting latency timer to 64 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp: Slot [1] registered pci-stub: invalid id string "" ACPI: AC Adapter [ACAD] (on-line) input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 ACPI: Sleep Button [SLPB] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 ACPI: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button [PWRF] ACPI: processor limited to max C-state 1 processor LNXCPU:00: registered as cooling_device0 processor LNXCPU:01: registered as cooling_device1 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (65 C) Non-volatile memory driver v1.3 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input4 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 23 alloc irq_desc for 23 on node 0 alloc kstat_irqs on node 0 ehci_hcd 0000:00:0b.1: PCI INT B -> Link[LUS2] -> GSI 23 (level, high) -> IRQ 23 ehci_hcd 0000:00:0b.1: setting latency timer to 64 ehci_hcd 0000:00:0b.1: EHCI Host Controller ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0b.1: debug port 1 ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported ehci_hcd 0000:00:0b.1: irq 23, io mem 0xc0005000 ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32.2-15.fc13.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:0b.1 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected work_for_cpu used greatest stack depth: 4480 bytes left ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22 alloc irq_desc for 22 on node 0 alloc kstat_irqs on node 0 ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LUS0] -> GSI 22 (level, high) -> IRQ 22 ohci_hcd 0000:00:0b.0: setting latency timer to 64 ohci_hcd 0000:00:0b.0: OHCI Host Controller ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:0b.0: irq 22, io mem 0xc0004000 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32.2-15.fc13.x86_64 ohci_hcd usb usb2: SerialNumber: 0000:00:0b.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 8 ports detected uhci_hcd: USB Universal Host Controller Interface driver PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice Driver 'rtc_cmos' needs updating - please use bus_type methods rtc_cmos 00:09: RTC can wake from S4 rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 PM: Resume from disk failed. registered taskstats version 1 No TPM chip found, activating TPM-bypass! Magic number: 5:569:1000 pnp 00:02: hash matches rtc_cmos 00:09: setting system clock to 2009-12-29 18:58:47 UTC (1262113127) Initalizing network drop monitor service usb 1-2: new high speed USB device using ehci_hcd and address 2 usb 1-2: New USB device found, idVendor=04b4, idProduct=6560 usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-2: configuration #1 chosen from 1 choice hub 1-2:1.0: USB hub found hub 1-2:1.0: 4 ports detected ACPI: Battery Slot [BAT0] (battery present) Freeing unused kernel memory: 2756k freed Write protecting the kernel read-only data: 6916k dracut: dracut-002-13.4.git8f397a9b.fc12 udev: starting version 145 usb 2-7: new full speed USB device using ohci_hcd and address 2 Synaptics Touchpad, model: 1, fw: 6.3, id: 0x180b1, caps: 0xa04711/0xa00000 [drm] Initialized drm 1.1.0 20060810 nouveau 0000:00:05.0: power state changed by ACPI to D0 ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 18 alloc irq_desc for 18 on node 0 alloc kstat_irqs on node 0 nouveau 0000:00:05.0: PCI INT A -> Link[LK3E] -> GSI 18 (level, high) -> IRQ 18 nouveau 0000:00:05.0: setting latency timer to 64 [drm] nouveau 0000:00:05.0: failed to evaluate _DSM: 5 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [drm] nouveau 0000:00:05.0: Detected an NV40 generation card (0x04e000a2) [drm] nouveau 0000:00:05.0: Attempting to load BIOS image from PROM [drm] nouveau 0000:00:05.0: ... BIOS signature not found [drm] nouveau 0000:00:05.0: Attempting to load BIOS image from PRAMIN usb 2-7: New USB device found, idVendor=03f0, idProduct=171d usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-7: Product: HP Integrated Module usb 2-7: Manufacturer: Broadcom Corp usb 2-7: configuration #1 chosen from 1 choice [drm] nouveau 0000:00:05.0: ... appears to be valid [drm] nouveau 0000:00:05.0: BIT BIOS found [drm] nouveau 0000:00:05.0: Bios version 05.51.28.52 [drm] nouveau 0000:00:05.0: TMDS table script pointers not stubbed [drm] nouveau 0000:00:05.0: Found Display Configuration Block version 3.0 [drm] nouveau 0000:00:05.0: Raw DCB entry 0: 030053f3 00000005 [drm] nouveau 0000:00:05.0: Raw DCB entry 1: 02010300 00000023 [drm] nouveau 0000:00:05.0: Raw DCB entry 2: 024123f1 0040c080 [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 0 at offset 0xE225 [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 1 at offset 0xE364 [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 2 at offset 0xE365 [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 3 at offset 0xE4E7 [drm] nouveau 0000:00:05.0: === C51 misaligned reg 0x00001305 not verified === [drm] nouveau 0000:00:05.0: === C51 misaligned reg 0x00001401 not verified === [drm] nouveau 0000:00:05.0: === C51 misaligned reg 0x00001405 not verified === [drm] nouveau 0000:00:05.0: === C51 misaligned reg 0x00001409 not verified === [drm] nouveau 0000:00:05.0: === C51 misaligned reg 0x0000140D not verified === [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 4 at offset 0xE533 [drm] nouveau 0000:00:05.0: BIOS FP mode: 1280x800 (74900kHz pixel clock) [TTM] Zone kernel: Available graphics memory: 1933294 kiB. [drm] nouveau 0000:00:05.0: 128 MiB VRAM [drm] nouveau 0000:00:05.0: 64 MiB GART (aperture) [drm] nouveau 0000:00:05.0: Allocating FIFO number 0 [drm] nouveau 0000:00:05.0: nouveau_channel_alloc: initialised FIFO 0 [drm] nouveau 0000:00:05.0: Initial CRTC_OWNER is 0 [drm] nouveau 0000:00:05.0: Enable TV-Out with tv module option [drm] nouveau 0000:00:05.0: Detected a LVDS connector [drm] nouveau 0000:00:05.0: Detected a VGA connector [drm] nouveau 0000:00:05.0: Saving VGA fonts usb 1-2.1: new high speed USB device using ehci_hcd and address 4 [drm] nouveau 0000:00:05.0: allocated 1280x800 fb: 0x49000, bo ffff8801371459e8 [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on lvds encoder (output 0) [drm] nouveau 0000:00:05.0: Calling LVDS script 6: [drm] nouveau 0000:00:05.0: 0xD3CD: Parsing digital output script table usb 1-2.1: New USB device found, idVendor=064e, idProduct=a110 usb 1-2.1: New USB device strings: Mfr=2, Product=1, SerialNumber=3 usb 1-2.1: Product: HP Webcam usb 1-2.1: Manufacturer: SuYin usb 1-2.1: SerialNumber: CN0314-MI01-VH-R03.01.01 usb 1-2.1: configuration #1 chosen from 1 choice usb 1-2.2: new full speed USB device using ehci_hcd and address 5 usb 1-2.2: New USB device found, idVendor=08ff, idProduct=1600 usb 1-2.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 1-2.2: Product: Fingerprint Sensor usb 1-2.2: configuration #1 chosen from 1 choice usb 1-2.3: new full speed USB device using ehci_hcd and address 6 [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 1) [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on CRTC 0 [drm] nouveau 0000:00:05.0: vpll: n 6 m 8 log2p 1 [drm] LVDS-7: set mode 1280x800 14 [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on CRTC 0 [drm] nouveau 0000:00:05.0: nv04_dfp_commit called for encoder 0 [drm] nouveau 0000:00:05.0: Calling LVDS script 2: [drm] nouveau 0000:00:05.0: 0xD439: Parsing digital output script table usb 1-2.3: New USB device found, idVendor=056a, idProduct=0093 usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-2.3: Product: ISD-V4 usb 1-2.3: Manufacturer: Tablet usb 1-2.3: configuration #1 chosen from 1 choice async/0 used greatest stack depth: 3736 bytes left [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on lvds encoder (output 0) [drm] nouveau 0000:00:05.0: Calling LVDS script 5: [drm] nouveau 0000:00:05.0: 0xD3B6: Parsing digital output script table [drm] nouveau 0000:00:05.0: Output LVDS-1 is running on CRTC 0 using output A [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on CRTC 1 Console: switching to colour frame buffer device 160x50 [drm] nouveau 0000:00:05.0: PFIFO_DMA_PUSHER - Ch 0 [drm] nouveau 0000:00:05.0: GPU lockup - switching to software fbcon fb0: nouveaufb frame buffer device registered panic notifier [drm] Initialized nouveau 0.0.15 20090420 for 0000:00:05.0 on minor 0 work_for_cpu used greatest stack depth: 3640 bytes left dracut: Starting plymouth daemon acpi device:2a: registered as cooling_device2 input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no) sata_nv 0000:00:0e.0: version 3.5 ACPI: PCI Interrupt Link [LTID] enabled at IRQ 21 alloc irq_desc for 21 on node 0 alloc kstat_irqs on node 0 sata_nv 0000:00:0e.0: PCI INT A -> Link[LTID] -> GSI 21 (level, high) -> IRQ 21 sata_nv 0000:00:0e.0: Using SWNCQ mode sata_nv 0000:00:0e.0: setting latency timer to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0x30b0 ctl 0x30a4 bmdma 0x3090 irq 21 ata2: SATA max UDMA/133 cmd 0x30a8 ctl 0x30a0 bmdma 0x3098 irq 21 pata_amd 0000:00:0d.0: version 0.4.1 pata_amd 0000:00:0d.0: setting latency timer to 64 scsi2 : pata_amd scsi3 : pata_amd ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3080 irq 14 ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3088 irq 15 ata3.00: ATAPI: Slimtype DVD A DS8A1H, WH66, max MWDMA2 ata3: nv_mode_filter: 0x39f&0x739f->0x39f, BIOS=0x0 (0xc600) ACPI=0x39f (120:600:0x12) ata3.00: configured for MWDMA2 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC32P, max UDMA/100 ata1.00: 488397168 sectors, multi 16: LBA48 ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54252 BBFO PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk ata2: SATA link down (SStatus 0 SControl 310) scsi 2:0:0:0: CD-ROM Slimtype DVD A DS8A1H WH66 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 2:0:0:0: Attached scsi CD-ROM sr0 sr 2:0:0:0: Attached scsi generic sg1 type 5 ata4: port disabled. ignoring. dracut: Scanning devices sda4 for LVM volume groups dracut: Reading all physical volumes. This may take a while... dracut: Found volume group "vg_localhost_00" using metadata type lvm2 dracut: 6 logical volume(s) in volume group "vg_localhost_00" now active dracut: luksOpen /dev/dm-0 luks-0b4f3979-b8f8-4aeb-a889-60133cbff447 Intel AES-NI instructions are not detected. padlock: VIA PadLock not detected. device-mapper: ioctl: unable to remove open device temporary-cryptsetup-377 EXT4-fs (dm-5): mounted filesystem with ordered data mode dracut: Mounted root filesystem /dev/mapper/vg_localhost_00-lv00 dracut: Loading SELinux policy type=1404 audit(1262113145.308:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 SELinux: 8192 avtab hash slots, 144829 rules. SELinux: 8192 avtab hash slots, 144829 rules. SELinux: 8 users, 12 roles, 3005 types, 142 bools, 1 sens, 1024 cats SELinux: 75 classes, 144829 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-5, type ext4), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts type=1403 audit(1262113146.540:3): policy loaded auid=4294967295 ses=4294967295 dracut: Switching root udev: starting version 145 ACPI: WMI: Mapper loaded ACPI: PCI Interrupt Link [LK1E] enabled at IRQ 19 alloc irq_desc for 19 on node 0 alloc kstat_irqs on node 0 b43-pci-bridge 0000:03:00.0: PCI INT A -> Link[LK1E] -> GSI 19 (level, high) -> IRQ 19 b43-pci-bridge 0000:03:00.0: setting latency timer to 64 ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0 i2c i2c-1: nForce2 SMBus adapter at 0x3040 i2c i2c-2: nForce2 SMBus adapter at 0x3000 input: HP WMI hotkeys as /devices/virtual/input/input8 cfg80211: Calling CRDA to update world regulatory domain b43-phy0: Broadcom 4312 WLAN found (core revision 15) b43-phy0 debug: Found PHY: Analog 6, Type 5, Revision 1 b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2062, Revision 2 name_count maxed, losing inode data: dev=00:07, inode=9794 name_count maxed, losing inode data: dev=00:07, inode=9794 name_count maxed, losing inode data: dev=00:07, inode=9794 name_count maxed, losing inode data: dev=00:07, inode=9794 name_count maxed, losing inode data: dev=00:07, inode=9794 name_count maxed, losing inode data: dev=00:07, inode=9794 name_count maxed, losing inode data: dev=00:07, inode=9794 name_count maxed, losing inode data: dev=00:07, inode=9794 name_count maxed, losing inode data: dev=00:07, inode=9794 name_count maxed, losing inode data: dev=00:07, inode=9794 name_count maxed, losing inode data: dev=00:07, inode=9794 name_count maxed, losing inode data: dev=00:07, inode=9794 name_count maxed, losing inode data: dev=00:07, inode=9730 name_count maxed, losing inode data: dev=00:07, inode=9815 name_count maxed, losing inode data: dev=00:07, inode=9815 name_count maxed, losing inode data: dev=00:07, inode=9815 name_count maxed, losing inode data: dev=00:07, inode=9815 name_count maxed, losing inode data: dev=00:07, inode=9815 name_count maxed, losing inode data: dev=00:07, inode=9815 name_count maxed, losing inode data: dev=00:07, inode=9815 name_count maxed, losing inode data: dev=00:07, inode=9815 name_count maxed, losing inode data: dev=00:07, inode=9815 name_count maxed, losing inode data: dev=00:07, inode=9815 name_count maxed, losing inode data: dev=00:07, inode=9815 name_count maxed, losing inode data: dev=00:07, inode=9815 name_count maxed, losing inode data: dev=00:07, inode=9815 name_count maxed, losing inode data: dev=00:07, inode=9815 name_count maxed, losing inode data: dev=00:07, inode=9815 name_count maxed, losing inode data: dev=00:07, inode=9830 name_count maxed, losing inode data: dev=00:07, inode=9830 name_count maxed, losing inode data: dev=00:07, inode=9830 name_count maxed, losing inode data: dev=00:07, inode=9830 name_count maxed, losing inode data: dev=00:07, inode=9830 name_count maxed, losing inode data: dev=00:07, inode=9830 name_count maxed, losing inode data: dev=00:07, inode=9830 name_count maxed, losing inode data: dev=00:07, inode=9830 name_count maxed, losing inode data: dev=00:07, inode=9830 name_count maxed, losing inode data: dev=00:07, inode=9830 name_count maxed, losing inode data: dev=00:07, inode=9830 name_count maxed, losing inode data: dev=00:07, inode=9830 name_count maxed, losing inode data: dev=00:07, inode=9830 EDAC MC: Ver: 2.1.0 Dec 24 2009 EDAC amd64_edac: Ver: 3.2.0 Dec 24 2009 EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). EDAC amd64: WARNING: ECC is disabled by BIOS. Module will NOT be loaded. Either Enable ECC in the BIOS, or set 'ecc_enable_override'. Also, use of the override can cause unknown side effects. amd64_edac: probe of 0000:00:18.2 failed with error -22 k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 alloc irq_desc for 20 on node 0 alloc kstat_irqs on node 0 forcedeth 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, high) -> IRQ 20 forcedeth 0000:00:14.0: setting latency timer to 64 nv_probe: set workaround bit for reversed mac addr Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1e:68:76:ab:3c forcedeth 0000:00:14.0: highdma pwrctl gbit lnktim desc-v3 Bluetooth: Generic Bluetooth USB driver ver 0.6 usbcore: registered new interface driver btusb name_count maxed, losing inode data: dev=00:07, inode=9815 name_count maxed, losing inode data: dev=00:07, inode=10195 phy0: Selected rate control algorithm 'minstrel' name_count maxed, losing inode data: dev=00:07, inode=9815 name_count maxed, losing inode data: dev=00:07, inode=10197 name_count maxed, losing inode data: dev=00:07, inode=10197 name_count maxed, losing inode data: dev=00:07, inode=10197 name_count maxed, losing inode data: dev=00:07, inode=10197 name_count maxed, losing inode data: dev=00:07, inode=10197 name_count maxed, losing inode data: dev=00:07, inode=10197 Registered led device: b43-phy0::tx Registered led device: b43-phy0::rx Registered led device: b43-phy0::radio name_count maxed, losing inode data: dev=00:05, inode=4 name_count maxed, losing inode data: dev=00:05, inode=4 Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ] input: Wacom ISDv4 93 as /devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2.3/1-2.3:1.0/input/input9 input: Wacom ISDv4 93 as /devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2.3/1-2.3:1.1/input/input10 usbcore: registered new interface driver wacom wacom: v1.51:USB Wacom Graphire and Wacom Intuos tablet driver Linux video capture interface: v2.00 uvcvideo: Found UVC 1.00 device HP Webcam (064e:a110) input: HP Webcam as /devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2.1/1-2.1:1.0/input/input11 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) HDA Intel 0000:00:10.1: enabling device (0000 -> 0002) ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 17 alloc irq_desc for 17 on node 0 alloc kstat_irqs on node 0 HDA Intel 0000:00:10.1: PCI INT B -> Link[LAZA] -> GSI 17 (level, high) -> IRQ 17 HDA Intel 0000:00:10.1: setting latency timer to 64 ALSA sound/pci/hda/hda_codec.c:3056: hda_codec: model 'hp' is selected input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:10.1/input/input12 ip used greatest stack depth: 3592 bytes left device-mapper: multipath: version 1.1.0 loaded EXT4-fs (sda1): mounted filesystem with ordered data mode SELinux: initialized (dev sda1, type ext4), uses xattr EXT4-fs (dm-4): mounted filesystem with ordered data mode SELinux: initialized (dev dm-4, type ext4), uses xattr EXT4-fs (dm-3): mounted filesystem with ordered data mode SELinux: initialized (dev dm-3, type ext4), uses xattr Adding 4194296k swap on /dev/mapper/vg_localhost_00-lv02. Priority:-1 extents:1 across:4194296k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts