Linux version 2.6.32.3-laxy (root@Valinor) (gcc version 4.2.2) #187 SMP Sun Jan 10 19:57:32 EET 2010 Command line: root=/dev/sda1 vga=791 splash=silent KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fee0000 (usable) BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS) BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data) BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) DMI 2.4 present. last_pfn = 0x7fee0 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CEFFF write-protect CF000-EFFFF uncachable F0000-FFFFF write-through MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 07FF00000 mask FFFF00000 write-through 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-000000007fee0000 0000000000 - 007fe00000 page 2M 007fe00000 - 007fee0000 page 4k kernel direct mapping tables up to 7fee0000 @ 8000-c000 RAMDISK: 37fce000 - 37fefb75 ACPI: RSDP 00000000000f6b40 00014 (v00 GBT ) ACPI: RSDT 000000007fee3040 00034 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: FACP 000000007fee30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: DSDT 000000007fee3180 04B25 (v01 GBT GBTUACPI 00001000 MSFT 0100000C) ACPI: FACS 000000007fee0000 00040 ACPI: HPET 000000007fee7e00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) ACPI: MCFG 000000007fee7e80 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: APIC 000000007fee7d00 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: Local APIC address 0xfee00000 (7 early reservations) ==> bootmem [0000000000 - 007fee0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 000163d724] TEXT DATA BSS ==> [0001000000 - 000163d724] #3 [0037fce000 - 0037fefb75] RAMDISK ==> [0037fce000 - 0037fefb75] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #5 [000163e000 - 000163e0f6] BRK ==> [000163e000 - 000163e0f6] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001c00000-ffff8800037fffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0007fee0 On node 0 totalpages: 523903 DMA zone: 56 pages used for memmap DMA zone: 101 pages reserved DMA zone: 3842 pages, LIFO batch:0 DMA32 zone: 7109 pages used for memmap DMA32 zone: 512795 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 4 CPUs, 2 hotplug CPUs nr_irqs_gsi: 24 Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:70100000) NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 25 pages/cpu @ffff880001800000 s71448 r8192 d22760 u524288 pcpu-alloc: s71448 r8192 d22760 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 516637 Kernel command line: root=/dev/sda1 vga=791 splash=silent bootsplash: silent mode. PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found Memory: 2056132k/2096000k available (3553k kernel code, 388k absent, 38832k reserved, 2056k data, 404k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. NR_IRQS:384 Console: colour dummy device 80x25 console [tty0] enabled hpet clockevent registered HPET: 4 timers in total, 0 timers will be used for per-cpu timer Fast TSC calibration using PIT Detected 2997.452 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5994.90 BogoMIPS (lpj=2997452) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20090903 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz stepping 0d Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5993.89 BogoMIPS (lpj=2996948) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) CPU1: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz stepping 0d checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (11988.80 BogoMIPS). NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 PCI: MCFG area at f0000000 reserved in E820 PCI: Using MMCONFIG at f0000000 - f3ffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0xd100-0xd11f] pci 0000:00:1a.1: reg 20 io port: [0xd200-0xd21f] pci 0000:00:1a.2: reg 20 io port: [0xd000-0xd01f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf9004000-0xf90043ff] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf9000000-0xf9003fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0xd300-0xd31f] pci 0000:00:1d.1: reg 20 io port: [0xd400-0xd41f] pci 0000:00:1d.2: reg 20 io port: [0xd500-0xd51f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf9005000-0xf90053ff] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f) pci 0000:00:1f.2: reg 10 io port: [0xd600-0xd607] pci 0000:00:1f.2: reg 14 io port: [0xd700-0xd703] pci 0000:00:1f.2: reg 18 io port: [0xd800-0xd807] pci 0000:00:1f.2: reg 1c io port: [0xd900-0xd903] pci 0000:00:1f.2: reg 20 io port: [0xda00-0xda0f] pci 0000:00:1f.2: reg 24 io port: [0xdb00-0xdb0f] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf9006000-0xf90060ff] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] pci 0000:00:1f.5: reg 10 io port: [0xdd00-0xdd07] pci 0000:00:1f.5: reg 14 io port: [0xde00-0xde03] pci 0000:00:1f.5: reg 18 io port: [0xdf00-0xdf07] pci 0000:00:1f.5: reg 1c io port: [0xe000-0xe003] pci 0000:00:1f.5: reg 20 io port: [0xe100-0xe10f] pci 0000:00:1f.5: reg 24 io port: [0xe200-0xe20f] pci 0000:01:00.0: reg 10 64bit mmio pref: [0xe0000000-0xefffffff] pci 0000:01:00.0: reg 18 64bit mmio: [0xf5000000-0xf500ffff] pci 0000:01:00.0: reg 20 io port: [0xa000-0xa0ff] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: reg 10 64bit mmio: [0xf5010000-0xf501ffff] pci 0000:01:00.1: supports D1 D2 pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:01.0: bridge io port: [0xa000-0xafff] pci 0000:00:01.0: bridge 32bit mmio: [0xf4000000-0xf5ffffff] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] pci 0000:00:1c.0: bridge io port: [0x8000-0x8fff] pci 0000:03:00.0: reg 10 io port: [0xb000-0xb007] pci 0000:03:00.0: reg 14 io port: [0xb100-0xb103] pci 0000:03:00.0: reg 18 io port: [0xb200-0xb207] pci 0000:03:00.0: reg 1c io port: [0xb300-0xb303] pci 0000:03:00.0: reg 20 io port: [0xb400-0xb40f] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1c.3: bridge io port: [0xb000-0xbfff] pci 0000:00:1c.3: bridge 32bit mmio: [0xf6000000-0xf6ffffff] pci 0000:04:00.0: reg 10 io port: [0xc000-0xc0ff] pci 0000:04:00.0: reg 18 64bit mmio: [0xf8000000-0xf8000fff] pci 0000:04:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] pci 0000:04:00.0: supports D1 D2 pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff] pci 0000:00:1c.4: bridge 32bit mmio: [0xf7000000-0xf8ffffff] pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0x9000-0x9fff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 *14 15) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 64-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x290-0x29f has been reserved system 00:01: ioport range 0x800-0x87f has been reserved system 00:01: ioport range 0x290-0x294 has been reserved system 00:01: ioport range 0x880-0x88f has been reserved system 00:0a: ioport range 0x400-0x4bf could not be reserved system 00:0b: iomem range 0xf0000000-0xf3ffffff has been reserved system 00:0c: iomem range 0xcf200-0xcffff has been reserved system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved system 00:0c: iomem range 0xfc000-0xfffff could not be reserved system 00:0c: iomem range 0x7fee0000-0x7fefffff could not be reserved system 00:0c: iomem range 0x0-0x9ffff could not be reserved system 00:0c: iomem range 0x100000-0x7fedffff could not be reserved system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0c: iomem range 0xfed10000-0xfed1dfff has been reserved system 00:0c: iomem range 0xfed20000-0xfed8ffff has been reserved system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0c: iomem range 0xffb00000-0xffb7ffff has been reserved system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved system 00:0c: iomem range 0xe0000-0xeffff has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0xa000-0xafff pci 0000:00:01.0: MEM window: 0xf4000000-0xf5ffffff pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: 0x8000-0x8fff pci 0000:00:1c.0: MEM window: 0x80000000-0x801fffff pci 0000:00:1c.0: PREFETCH window: 0x00000080200000-0x000000803fffff pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.3: IO window: 0xb000-0xbfff pci 0000:00:1c.3: MEM window: 0xf6000000-0xf6ffffff pci 0000:00:1c.3: PREFETCH window: 0x00000080400000-0x000000805fffff pci 0000:00:1c.4: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.4: IO window: 0xc000-0xcfff pci 0000:00:1c.4: MEM window: 0xf7000000-0xf8ffffff pci 0000:00:1c.4: PREFETCH window: 0x80600000-0x807fffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 pci 0000:00:1e.0: IO window: 0x9000-0x9fff pci 0000:00:1e.0: MEM window: disabled pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0xa000-0xafff] pci_bus 0000:01: resource 1 mem: [0xf4000000-0xf5ffffff] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff] pci_bus 0000:02: resource 0 io: [0x8000-0x8fff] pci_bus 0000:02: resource 1 mem: [0x80000000-0x801fffff] pci_bus 0000:02: resource 2 pref mem [0x80200000-0x803fffff] pci_bus 0000:03: resource 0 io: [0xb000-0xbfff] pci_bus 0000:03: resource 1 mem: [0xf6000000-0xf6ffffff] pci_bus 0000:03: resource 2 pref mem [0x80400000-0x805fffff] pci_bus 0000:04: resource 0 io: [0xc000-0xcfff] pci_bus 0000:04: resource 1 mem: [0xf7000000-0xf8ffffff] pci_bus 0000:04: resource 2 pref mem [0x80600000-0x807fffff] pci_bus 0000:05: resource 0 io: [0x9000-0x9fff] pci_bus 0000:05: resource 3 io: [0x00-0xffff] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:01:00.0: Boot video device Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (junk in compressed archive); looks like an initrd Freeing initrd memory: 134k freed microcode: CPU0 sig=0x6fd, pf=0x1, revision=0xa1 microcode: CPU1 sig=0x6fd, pf=0x1, revision=0xa1 Microcode Update Driver: v2.00 , Peter Oruba squashfs: version 4.0 (2009/01/31) Phillip Lougher Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Slow work thread pool: Starting up Slow work thread pool: Ready JFS: nTxBlock = 8192, nTxLock = 65536 msgmni has been set to 4017 alg: No test for cipher_null (cipher_null-generic) alg: No test for ecb(cipher_null) (ecb-cipher_null) alg: No test for digest_null (digest_null-generic) alg: No test for compress_null (compress_null-generic) alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler cfq registered (default) pcieport 0000:00:01.0: irq 24 for MSI/MSI-X pcieport 0000:00:01.0: setting latency timer to 64 pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X pcieport 0000:00:1c.3: setting latency timer to 64 pcieport 0000:00:1c.4: irq 27 for MSI/MSI-X pcieport 0000:00:1c.4: setting latency timer to 64 vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004700000, using 6144k, total 16384k vesafb: mode is 1024x768x16, linelength=2048, pages=9 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture... bootsplash: silentjpeg size 89844 bytes bootsplash: ...found (1024x768, 48219 bytes, v3). Console: switching to colour frame buffer device 123x43 fb0: VESA VGA frame buffer device input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] processor LNXCPU:00: registered as cooling_device0 processor LNXCPU:01: registered as cooling_device1 lp: driver loaded but no devices found [drm] Initialized drm 1.1.0 20060810 Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A parport_pc 00:08: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] lp0: using parport0 (interrupt-driven). brd: module loaded loop: loaded (max 8 devices) ata_piix 0000:00:1f.2: version 2.13 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0xd600 ctl 0xd700 bmdma 0xda00 irq 19 ata2: SATA max UDMA/133 cmd 0xd800 ctl 0xd900 bmdma 0xda08 irq 19 ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] ata_piix 0000:00:1f.5: setting latency timer to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0xdd00 ctl 0xde00 bmdma 0xe100 irq 19 ata4: SATA max UDMA/133 cmd 0xdf00 ctl 0xe000 bmdma 0xe108 irq 19 pata_jmicron 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 pata_jmicron 0000:03:00.0: setting latency timer to 64 scsi4 : pata_jmicron scsi5 : pata_jmicron ata5: PATA max UDMA/100 cmd 0xb000 ctl 0xb100 bmdma 0xb400 irq 19 ata6: PATA max UDMA/100 cmd 0xb200 ctl 0xb300 bmdma 0xb408 irq 19 PPP generic driver version 2.4.2 PPP Deflate Compression module registered r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 r8169 0000:04:00.0: setting latency timer to 64 r8169 0000:04:00.0: irq 28 for MSI/MSI-X eth0: RTL8168b/8111b at 0xffffc9000007e000, 00:1d:7d:ad:4e:95, XID 18000000 IRQ 28 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9004000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9005000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d100 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d200 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000d000 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d300 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d400 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d500 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice Driver 'rtc_cmos' needs updating - please use bus_type methods rtc_cmos 00:04: RTC can wake from S4 rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, 242 bytes nvram, hpet irqs i2c /dev entries driver i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 coretemp coretemp.0: Using relative temperature scale! coretemp coretemp.1: Using relative temperature scale! it87: Found IT8718F chip at 0x290, revision 4 it87: in3 is VCC (+5V) cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.21. HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 ALSA device list: ata5.00: HPA detected: current 312579695, native 312581808 ata5.00: ATA-7: WDC WD1600AVBB-63SYA0, 00.07H00, max UDMA/100 ata5.00: 312579695 sectors, multi 16: LBA48 #0: HDA Intel at 0xf9000000 irq 22 nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ip_tables: (C) 2000-2006 Netfilter Core Team ata5.00: configured for UDMA/100 TCP cubic registered NET: Registered protocol family 17 NET: Registered protocol family 15 ata1: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATAPI: TSSTcorp CDDVDW SH-S223Q, SB01, max UDMA/100 ata2.00: configured for UDMA/100 scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223Q SB01 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg0 type 5 scsi 4:0:0:0: Direct-Access ATA WDC WD1600AVBB-6 00.0 PQ: 0 ANSI: 5 sd 4:0:0:0: [sda] 312579695 512-byte logical blocks: (160 GB/149 GiB) sd 4:0:0:0: [sda] Write Protect is off sd 4:0:0:0: Attached scsi generic sg1 type 0 sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 4:0:0:0: [sda] Attached SCSI disk usb 4-1: new low speed USB device using uhci_hcd and address 2 RAMDISK: Couldn't find valid RAM disk image starting at 0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with writeback data mode. VFS: Mounted root (ext3 filesystem) readonly on device 8:1. Freeing unused kernel memory: 404k freed usb 4-1: configuration #1 chosen from 1 choice input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input3 generic-usb 0003:04F3:0214.0001: input: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:1a.1-1/input0 EXT3 FS on sda1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with writeback data mode. Adding 971924k swap on /dev/sda3. Priority:1 extents:1 across:971924k microcode: CPU0 updated to revision 0xa3, date = 2007-08-13 microcode: CPU1 updated to revision 0xa3, date = 2007-08-13 r8169: eth0: link up r8169: eth0: link up pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [drm] radeon defaulting to userspace modesetting. pci 0000:01:00.0: setting latency timer to 64 [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0