[ 0.000000] Using PowerMac machine description [ 0.000000] Total memory = 1024MB; using 2048kB for hash table (at cfe00000) [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 2.6.32.3-powerpc (root@imac-Linux) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #1 Sat Jan 9 17:02:42 CET 2010 [ 0.000000] Found initrd at 0xc1b00000:0xc1e16000 [ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2 [ 0.000000] Mapped at 0xff7c0000 [ 0.000000] Found a Intrepid mac-io controller, rev: 0, mapped at 0xff740000 [ 0.000000] Processor NAP mode on idle enabled. [ 0.000000] PowerMac motherboard: Flat panel iMac [ 0.000000] bootconsole [udbg0] enabled [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /pci@f0000000 ranges: [ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 [ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000 [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /pci@f2000000 (primary) ranges: [ 0.000000] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000 [ 0.000000] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000 [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /pci@f4000000 ranges: [ 0.000000] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000 [ 0.000000] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000 [ 0.000000] via-pmu: Server Mode is disabled [ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c [ 0.000000] nvram: Checking bank 0... [ 0.000000] nvram: gen0=546, gen1=545 [ 0.000000] nvram: Active bank is: 0 [ 0.000000] nvram: OF partition at 0x410 [ 0.000000] nvram: XP partition at 0x1020 [ 0.000000] nvram: NR partition at 0x1120 [ 0.000000] Top of RAM: 0x40000000, Total RAM: 0x40000000 [ 0.000000] Memory hole size: 0MB [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00030000 [ 0.000000] Normal 0x00030000 -> 0x00030000 [ 0.000000] HighMem 0x00030000 -> 0x00040000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00040000 [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] free_area_init_node: node 0, pgdat c0573114, node_mem_map c0609000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 195072 pages, LIFO batch:31 [ 0.000000] HighMem zone: 512 pages used for memmap [ 0.000000] HighMem zone: 65024 pages, LIFO batch:15 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096 [ 0.000000] Kernel command line: root=/dev/hda2 ro video=offb:off video=TV-1:d [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] High memory: 262144k [ 0.000000] Memory: 1027024k/1048576k available (5388k kernel code, 20708k reserved, 260k data, 477k bss, 216k init) [ 0.000000] Kernel virtual memory layout: [ 0.000000] * 0xfffef000..0xfffff000 : fixmap [ 0.000000] * 0xff800000..0xffc00000 : highmem PTEs [ 0.000000] * 0xfdf32000..0xff800000 : early ioremap [ 0.000000] * 0xf1000000..0xfdf32000 : vmalloc & ioremap [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:512 [ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs [ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f [ 0.000000] mpic: Initializing for 64 sources [ 0.000000] GMT Delta read from XPRAM: 0 minutes, DST: off [ 0.000000] time_init: decrementer frequency = 41.600571 MHz [ 0.000000] time_init: processor frequency = 999.999996 MHz [ 0.000000] clocksource: timebase mult[60270bf] shift[22] registered [ 0.000000] clockevent: decrementer mult[aa655c3] shift[32] cpu[0] [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled, bootconsole disabled [ 0.000141] Security Framework initialized [ 0.000167] SELinux: Disabled at boot. [ 0.000184] Mount-cache hash table entries: 512 [ 0.000542] device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1" [ 0.002519] Initializing cgroup subsys ns [ 0.002532] Initializing cgroup subsys devices [ 0.002542] Initializing cgroup subsys freezer [ 0.002550] Initializing cgroup subsys net_cls [ 0.003859] regulator: core version 0.5 [ 0.003992] NET: Registered protocol family 16 [ 0.004354] MPC7450 family performance monitor hardware support registered [ 0.004412] irq: irq 42 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 42 [ 0.004449] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000 [ 0.004462] channel 0 bus [ 0.004470] channel 1 bus [ 0.004499] irq: irq 26 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 26 [ 0.004516] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000 [ 0.004529] channel 0 bus [ 0.004550] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c [ 0.004560] channel 1 bus [ 0.004567] channel 2 bus [ 0.004613] irq: irq 25 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 25 [ 0.004637] irq: irq 47 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 47 [ 0.004752] PCI: Probing PCI hardware [ 0.004925] pci 0000:00:10.0: reg 10 32bit mmio: [0x91000000-0x91ffffff] [ 0.004934] pci 0000:00:10.0: reg 14 32bit mmio pref: [0x98000000-0x9fffffff] [ 0.004953] pci 0000:00:10.0: reg 30 32bit mmio pref: [0x90000000-0x9001ffff] [ 0.005022] irq: irq 48 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 48 [ 0.005251] pci 0001:10:12.0: reg 10 32bit mmio: [0x80084000-0x80085fff] [ 0.005290] pci 0001:10:12.0: supports D1 D2 [ 0.005295] pci 0001:10:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.005309] pci 0001:10:12.0: PME# disabled [ 0.005342] pci 0001:10:17.0: reg 10 32bit mmio: [0x80000000-0x8007ffff] [ 0.005391] pci 0001:10:18.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.005442] pci 0001:10:19.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.005497] pci 0001:10:1a.0: reg 10 32bit mmio: [0x80083000-0x80083fff] [ 0.005556] pci 0001:10:1b.0: reg 10 32bit mmio: [0x80082000-0x80082fff] [ 0.005594] pci 0001:10:1b.0: supports D1 D2 [ 0.005599] pci 0001:10:1b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.005621] pci 0001:10:1b.0: PME# disabled [ 0.005662] pci 0001:10:1b.1: reg 10 32bit mmio: [0x80081000-0x80081fff] [ 0.005700] pci 0001:10:1b.1: supports D1 D2 [ 0.005705] pci 0001:10:1b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.005720] pci 0001:10:1b.1: PME# disabled [ 0.005761] pci 0001:10:1b.2: reg 10 32bit mmio: [0x80080000-0x800800ff] [ 0.005799] pci 0001:10:1b.2: supports D1 D2 [ 0.005804] pci 0001:10:1b.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.005819] pci 0001:10:1b.2: PME# disabled [ 0.005873] irq: irq 52 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 52 [ 0.005899] irq: irq 27 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 27 [ 0.005923] irq: irq 28 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 28 [ 0.005946] irq: irq 29 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 29 [ 0.005967] irq: irq 63 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 63 [ 0.006459] pci 0002:20:0d.0: reg 10 32bit mmio: [0xf5004000-0xf5007fff] [ 0.006506] pci 0002:20:0e.0: reg 10 32bit mmio: [0xf5000000-0xf5000fff] [ 0.006537] pci 0002:20:0e.0: supports D1 D2 [ 0.006542] pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.006559] pci 0002:20:0e.0: PME# disabled [ 0.006587] pci 0002:20:0f.0: reg 10 32bit mmio: [0xf5200000-0xf53fffff] [ 0.006607] pci 0002:20:0f.0: reg 30 32bit mmio pref: [0xf5100000-0xf51fffff] [ 0.006658] irq: irq 39 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 39 [ 0.006680] irq: irq 40 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 40 [ 0.006702] irq: irq 41 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 41 [ 0.006978] pci_bus 0000:00: resource 0 io: [0x802000-0x1001fff] [ 0.006985] pci_bus 0000:00: resource 1 mem: [0xf1000000-0xf1ffffff] [ 0.006991] pci_bus 0000:00: resource 2 mem: [0x90000000-0x9fffffff] [ 0.006997] pci_bus 0001:10: resource 0 io: [0x00-0x7fffff] [ 0.007002] pci_bus 0001:10: resource 1 mem: [0xf3000000-0xf3ffffff] [ 0.007008] pci_bus 0001:10: resource 2 mem: [0x80000000-0x8fffffff] [ 0.007014] pci_bus 0002:20: resource 0 io: [0xff7fe000-0xffffdfff] [ 0.007020] pci_bus 0002:20: resource 1 mem: [0xf5000000-0xf5ffffff] [ 0.008393] bio: create slab at 0 [ 0.008761] vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=mem,locks=none [ 0.008803] vgaarb: loaded [ 0.009093] SCSI subsystem initialized [ 0.009230] libata version 3.00 loaded. [ 0.009421] usbcore: registered new interface driver usbfs [ 0.009461] usbcore: registered new interface driver hub [ 0.009544] usbcore: registered new device driver usb [ 0.009860] Switching to clocksource timebase [ 0.013703] NET: Registered protocol family 2 [ 0.013972] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.014673] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.016296] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [ 0.016720] TCP: Hash tables configured (established 131072 bind 65536) [ 0.016741] TCP reno registered [ 0.016930] NET: Registered protocol family 1 [ 0.017156] Trying to unpack rootfs image as initramfs... [ 0.156500] Freeing initrd memory: 3160k freed [ 0.156913] Thermal assist unit not available [ 0.157383] audit: initializing netlink socket (disabled) [ 0.157428] type=2000 audit(1263376390.152:1): initialized [ 0.170934] highmem bounce pool size: 64 pages [ 0.174293] VFS: Disk quotas dquot_6.5.2 [ 0.174465] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.175271] fuse init (API version 7.13) [ 0.175476] msgmni has been set to 1501 [ 0.175999] alg: No test for stdrng (krng) [ 0.176041] io scheduler noop registered [ 0.176052] io scheduler anticipatory registered [ 0.176063] io scheduler deadline registered [ 0.176216] io scheduler cfq registered (default) [ 0.179192] Generic non-volatile memory driver v1.1 [ 0.181159] brd: module loaded [ 0.181248] MacIO PCI driver attached to Intrepid chipset [ 0.181576] irq: irq 32 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 32 [ 0.181798] irq: irq 24 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 24 [ 0.181813] irq: irq 12 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 16 [ 0.181944] irq: irq 22 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 22 [ 0.181960] irq: irq 5 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 17 [ 0.181974] irq: irq 6 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 18 [ 0.182102] irq: irq 23 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 23 [ 0.182117] irq: irq 7 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 19 [ 0.182131] irq: irq 8 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 20 [ 0.182463] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 0.182786] Uniform Multi-Platform E-IDE driver [ 0.183001] ide-pmac 0002:20:0d.0: enabling device (0000 -> 0002) [ 0.183138] adb: starting probe task... [ 0.183154] adb: finished probe task... [ 1.201903] ide-pmac: Found Apple UniNorth ATA-6 controller (PCI), bus ID 3, irq 39 [ 1.201942] Probing IDE interface ide0... [ 1.490073] hda: ST380011A, ATA DISK drive [ 2.161964] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 2.162165] hda: UDMA/100 mode selected [ 2.162443] ide0 at 0xf102a000-0xf102a070,0xf102a160 on irq 39 [ 3.181900] ide-pmac: Found Apple KeyLargo ATA-3 controller (macio), bus ID 0, irq 24 [ 3.181938] Probing IDE interface ide1... [ 3.582071] hdc: HL-DT-STDVD-RAM GSA-H55L, ATAPI CD/DVD-ROM drive [ 3.917963] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 4.123947] hdc: MWDMA2 mode selected [ 4.124212] ide1 at 0xf1026000-0xf1026070,0xf1026160 on irq 24 [ 4.124317] ide-gd driver 1.18 [ 4.124367] hda: max request size: 512KiB [ 4.134125] hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63 [ 4.134293] hda: cache flushes supported [ 4.134395] hda: [mac] hda1 hda2 hda3 hda4 hda5 hda6 hda7 [ 4.153606] ide-cd driver 5.00 [ 4.155792] ide-cd: hdc: ATAPI 48X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache [ 4.155823] Uniform CD-ROM driver Revision: 3.20 [ 10.310643] Fixed MDIO Bus: probed [ 10.310792] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 10.310850] ehci_hcd 0001:10:1b.2: enabling device (0004 -> 0006) [ 10.310883] ehci_hcd 0001:10:1b.2: EHCI Host Controller [ 10.310986] ehci_hcd 0001:10:1b.2: new USB bus registered, assigned bus number 1 [ 10.333941] ehci_hcd 0001:10:1b.2: irq 63, io mem 0x80080000 [ 10.345897] ehci_hcd 0001:10:1b.2: USB 2.0 started, EHCI 1.00 [ 10.346079] usb usb1: configuration #1 chosen from 1 choice [ 10.346157] hub 1-0:1.0: USB hub found [ 10.346186] hub 1-0:1.0: 5 ports detected [ 10.346343] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 10.346399] Apple USB OHCI 0001:10:18.0 disabled by firmware [ 10.346429] Apple USB OHCI 0001:10:19.0 disabled by firmware [ 10.346456] ohci_hcd 0001:10:1a.0: enabling device (0000 -> 0002) [ 10.346483] ohci_hcd 0001:10:1a.0: OHCI Host Controller [ 10.346582] ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus number 2 [ 10.346631] ohci_hcd 0001:10:1a.0: irq 29, io mem 0x80083000 [ 10.421791] usb usb2: configuration #1 chosen from 1 choice [ 10.421864] hub 2-0:1.0: USB hub found [ 10.421913] hub 2-0:1.0: 2 ports detected [ 10.422010] ohci_hcd 0001:10:1b.0: enabling device (0000 -> 0002) [ 10.422038] ohci_hcd 0001:10:1b.0: OHCI Host Controller [ 10.422142] ohci_hcd 0001:10:1b.0: new USB bus registered, assigned bus number 3 [ 10.422183] ohci_hcd 0001:10:1b.0: irq 63, io mem 0x80082000 [ 10.497755] usb usb3: configuration #1 chosen from 1 choice [ 10.497824] hub 3-0:1.0: USB hub found [ 10.497852] hub 3-0:1.0: 3 ports detected [ 10.497965] ohci_hcd 0001:10:1b.1: enabling device (0000 -> 0002) [ 10.497993] ohci_hcd 0001:10:1b.1: OHCI Host Controller [ 10.498087] ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 4 [ 10.498128] ohci_hcd 0001:10:1b.1: irq 63, io mem 0x80081000 [ 10.573760] usb usb4: configuration #1 chosen from 1 choice [ 10.573833] hub 4-0:1.0: USB hub found [ 10.573860] hub 4-0:1.0: 2 ports detected [ 10.573976] uhci_hcd: USB Universal Host Controller Interface driver [ 10.574236] mice: PS/2 mouse device common for all mice [ 10.574360] PowerMac i2c bus pmu 2 registered [ 10.574408] PowerMac i2c bus pmu 1 registered [ 10.574453] PowerMac i2c bus mac-io 0 registered [ 10.574498] PowerMac i2c bus uni-n 1 registered [ 10.574586] PowerMac i2c bus uni-n 0 registered [ 10.575274] TCP cubic registered [ 10.575291] NET: Registered protocol family 17 [ 10.575527] registered taskstats version 1 [ 10.575961] input: PMU as /devices/virtual/input/input1 [ 10.575994] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 10.576035] Freeing unused kernel memory: 216k init [ 10.986022] usb 2-1: new full speed USB device using ohci_hcd and address 2 [ 11.082115] Linux agpgart interface v0.103 [ 11.151226] agpgart-uninorth 0000:00:0b.0: Apple UniNorth 2 chipset [ 11.152305] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64 [ 11.152427] agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0 [ 11.269434] [drm] Initialized drm 1.1.0 20060810 [ 11.279216] ohci1394 0002:20:0e.0: enabling device (0000 -> 0002) [ 11.342775] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[2048] IR/IT contexts=[8/8] [ 11.351210] sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com) [ 11.430882] [drm] nouveau 0000:00:10.0: Detected an NV10 generation card (0x018900a3) [ 11.431041] [drm] nouveau 0000:00:10.0: OF bios successfully copied (4027 bytes) [ 11.431151] [drm] nouveau 0000:00:10.0: Attempting to load BIOS image from PROM [ 11.431177] [drm] nouveau 0000:00:10.0: ... BIOS signature not found [ 11.431191] [drm] nouveau 0000:00:10.0: Attempting to load BIOS image from PRAMIN [ 11.463344] [drm] nouveau 0000:00:10.0: ... BIOS checksum invalid [ 11.463367] [drm] nouveau 0000:00:10.0: Attempting to load BIOS image from PCIROM [ 11.463863] PHY ID: 4061e4, addr: 0 [ 11.465472] eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0a:95:ba:d4:9a [ 11.465504] eth0: Found BCM5221 PHY [ 11.467068] [drm] nouveau 0000:00:10.0: ... BIOS signature not found [ 11.467100] [drm] nouveau 0000:00:10.0: Using BIOS image from PRAMIN [ 11.499648] [drm] nouveau 0000:00:10.0: BMP BIOS found [ 11.499672] [drm] nouveau 0000:00:10.0: BMP version 5.38 [ 11.499687] [drm] nouveau 0000:00:10.0: Bios version 04.18.20.19 [ 11.499704] [drm] nouveau 0000:00:10.0: Found Display Configuration Block version 2.2 [ 11.499726] [drm] nouveau 0000:00:10.0: Raw DCB entry 0: 01000123 00000004 [ 11.499743] [drm] nouveau 0000:00:10.0: Raw DCB entry 1: 02010200 11b088b8 [ 11.499757] [drm] nouveau 0000:00:10.0: Raw DCB entry 2: 02010201 11b00703 [ 11.499815] [drm] nouveau 0000:00:10.0: Loading NV17 power sequencing microcode [ 11.499835] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 0 at offset 0x030E [ 11.499904] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 1 at offset 0x0454 [ 11.499938] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 2 at offset 0x077A [ 11.500774] usb 2-1: configuration #1 chosen from 1 choice [ 11.524904] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 3 at offset 0x0959 [ 11.524952] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 4 at offset 0x0976 [ 11.524974] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 5 at offset 0x0993 [ 11.545901] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 6 at offset 0x0AB9 [ 11.554648] [TTM] Zone kernel: Available graphics memory: 384550 kiB. [ 11.554699] [TTM] Zone highmem: Available graphics memory: 515622 kiB. [ 11.554893] [drm] nouveau 0000:00:10.0: 32 MiB VRAM [ 11.557384] [drm] nouveau 0000:00:10.0: 64 MiB GART (aperture) [ 11.557536] [drm] nouveau 0000:00:10.0: Allocating FIFO number 0 [ 11.557976] [drm] nouveau 0000:00:10.0: nouveau_channel_alloc: initialised FIFO 0 [ 11.558015] [drm] nouveau 0000:00:10.0: Initial CRTC_OWNER is 0 [ 11.558136] [drm] nouveau 0000:00:10.0: Detected a LVDS connector [ 11.656859] [drm] nouveau 0000:00:10.0: Detected a VGA connector [ 11.657439] [drm] nouveau 0000:00:10.0: Detected a TV connector [ 11.659058] [drm] nouveau 0000:00:10.0: Setting dpms mode 3 on lvds encoder (output 0) [ 11.659091] [drm] nouveau 0000:00:10.0: Calling LVDS script 1: [ 11.659106] [drm] nouveau 0000:00:10.0: Calling LVDS script 6: [ 11.659120] [drm] nouveau 0000:00:10.0: 0x0EA6: Parsing digital output script table [ 11.709967] usb 3-1: new low speed USB device using ohci_hcd and address 2 [ 11.922517] usb 3-1: configuration #1 chosen from 1 choice [ 11.965457] usbcore: registered new interface driver hiddev [ 11.973251] input: Logitech USB Optical Mouse as /devices/pci0001:10/0001:10:1b.0/usb3/3-1/3-1:1.0/input/input2 [ 11.973701] generic-usb 0003:046D:C018.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0001:10:1b.0-1/input0 [ 11.973803] usbcore: registered new interface driver usbhid [ 11.974202] usbhid: v2.6:USB HID core driver [ 12.161912] [drm] nouveau 0000:00:10.0: Setting dpms mode 3 on vga encoder (output 1) [ 12.161952] [drm] nouveau 0000:00:10.0: Setting dpms mode 3 on TV encoder (output 2) [ 12.181710] [drm] forcing TV-1 connector OFF [ 12.214100] [drm] nouveau 0000:00:10.0: allocated 1024x768 fb: 0x9000, bo c18a0c00 [ 12.214925] Console: switching to colour frame buffer device 128x48 [ 12.215018] [drm] LVDS-7: set mode 1024x768 26 [ 12.405159] [drm] nouveau 0000:00:10.0: Output LVDS-1 is running on CRTC 0 using output A [ 12.405166] [drm] nouveau 0000:00:10.0: Calling LVDS script 2: [ 12.405172] [drm] nouveau 0000:00:10.0: 0x0C5F: Parsing digital output script table [ 12.405786] usb 3-2: new full speed USB device using ohci_hcd and address 3 [ 12.421948] [drm] nouveau 0000:00:10.0: Setting dpms mode 0 on lvds encoder (output 0) [ 12.421957] [drm] nouveau 0000:00:10.0: Calling LVDS script 5: [ 12.421962] [drm] nouveau 0000:00:10.0: 0x0D14: Parsing digital output script table [ 12.421984] [drm] nouveau 0000:00:10.0: Output LVDS-1 is running on CRTC 0 using output A [ 12.423539] fb0: nouveaufb frame buffer device [ 12.423543] registered panic notifier [ 12.423600] [drm] Initialized nouveau 0.0.15 20090420 for 0000:00:10.0 on minor 0 [ 12.618804] usb 3-2: configuration #1 chosen from 1 choice [ 12.621749] hub 3-2:1.0: USB hub found [ 12.624608] hub 3-2:1.0: 3 ports detected [ 12.678145] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000a95fffebad49a] [ 12.923843] usb 3-2.3: new full speed USB device using ohci_hcd and address 4 [ 13.033794] PM: Starting manual resume from disk [ 13.038789] usb 3-2.3: configuration #1 chosen from 1 choice [ 13.050904] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:10/0001:10:1b.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input3 [ 13.053703] generic-usb 0003:05AC:020C.0002: input,hidraw1: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:10:1b.0-2.3/input0 [ 13.066860] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:10/0001:10:1b.0/usb3/3-2/3-2.3/3-2.3:1.1/input/input4 [ 13.068819] generic-usb 0003:05AC:020C.0003: input,hidraw2: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:10:1b.0-2.3/input1 [ 13.103962] EXT4-fs (hda2): mounted filesystem with ordered data mode [ 13.862069] eth0: Link is up at 100 Mbps, full-duplex. [ 15.019034] Adding 1074208k swap on /dev/hda4. Priority:-1 extents:1 across:1074208k [ 15.211296] udev: starting version 147 [ 15.919361] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0 [ 15.919507] b43-pci-bridge 0001:10:12.0: enabling device (0004 -> 0006) [ 15.977256] ssb: Sonics Silicon Backplane found on PCI device 0001:10:12.0 [ 16.183565] Bluetooth: Core ver 2.15 [ 16.197758] NET: Registered protocol family 31 [ 16.197767] Bluetooth: HCI device and connection manager initialized [ 16.197775] Bluetooth: HCI socket layer initialized [ 16.203069] pmac_zilog: 0.6 (Benjamin Herrenschmidt ) [ 16.203234] ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port [ 16.208615] ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port [ 16.316152] cfg80211: Calling CRDA to update world regulatory domain [ 16.333413] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 16.335499] usbcore: registered new interface driver btusb [ 16.917082] apm_emu: PMU APM Emulation initialized. [ 16.994761] b43legacy-phy0: Broadcom 4306 WLAN found [ 17.017922] b43legacy-phy0 debug: Found PHY: Analog 1, Type 2, Revision 1 [ 17.017952] b43legacy-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2 [ 17.041924] b43legacy-phy0 debug: Radio initialized [ 17.053781] cfg80211: World regulatory domain updated: [ 17.053795] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 17.053802] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 17.053808] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 17.053815] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 17.053821] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 17.053827] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 17.158143] phy0: Selected rate control algorithm 'minstrel' [ 17.158850] Broadcom 43xx-legacy driver loaded [ Features: PLID, Firmware-ID: FW10 ] [ 17.700104] ip_tables: (C) 2000-2006 Netfilter Core Team [ 18.099767] irq: irq 30 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 30 [ 18.099809] irq: irq 1 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 21 [ 18.099830] irq: irq 2 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 31 [ 18.849467] snd-aoa-fabric-layout: Using direct GPIOs [ 18.849594] irq: irq 61 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 61 [ 18.849611] irq: irq 50 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 50 [ 18.888202] snd-aoa-codec-tas: found 'deq' node [ 18.889224] snd-aoa-fabric-layout: can use this codec [ 18.953287] snd-aoa-codec-tas: tas found, addr 0x35 on /pci@f2000000/mac-io@17/i2c@18000/deq@6a [ 22.233985] b43legacy ssb0:0: firmware: requesting b43legacy/ucode4.fw [ 22.519292] b43legacy ssb0:0: firmware: requesting b43legacy/pcm4.fw [ 22.735594] b43legacy ssb0:0: firmware: requesting b43legacy/b0g0initvals2.fw [ 23.009946] b43legacy-phy0: Loading firmware version 0x127, patch level 14 (2005-04-18 02:36:27) [ 23.074453] b43legacy-phy0 debug: Chip initialized [ 23.074976] b43legacy-phy0 debug: 30-bit DMA initialized [ 23.081700] Registered led device: b43legacy-phy0::tx [ 23.084501] Registered led device: b43legacy-phy0::rx [ 23.084805] Registered led device: b43legacy-phy0::radio [ 23.084862] b43legacy-phy0 debug: Wireless interface started [ 23.090243] b43legacy-phy0 debug: Adding Interface type 2 [ 23.138326] eth0: Link is up at 100 Mbps, full-duplex. [ 23.138337] eth0: Pause is disabled [ 24.337979] [drm] nouveau 0000:00:10.0: Allocating FIFO number 1 [ 24.338823] [drm] nouveau 0000:00:10.0: nouveau_channel_alloc: initialised FIFO 1 [ 25.448358] NET: Registered protocol family 10 [ 25.449199] lo: Disabled Privacy Extensions [ 25.455729] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 26.180167] hda: host max PIO4 wanted PIO0 selected PIO0 [ 26.839440] hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } [ 26.839458] hda: task_no_data_intr: error=0x04 { DriveStatusError } [ 26.839466] hda: possibly failed opcode: 0xef [ 36.205904] eth0: no IPv6 routers present [ 121.408959] Bluetooth: L2CAP ver 2.14 [ 121.408972] Bluetooth: L2CAP socket layer initialized [ 121.507767] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 121.507780] Bluetooth: BNEP filters: protocol multicast [ 121.601255] Bridge firewalling registered [ 121.643911] lp: driver loaded but no devices found [ 121.696515] Bluetooth: SCO (Voice Link) ver 0.6 [ 121.696527] Bluetooth: SCO socket layer initialized [ 121.703126] ppdev: user-space parallel port driver [ 121.947444] Bluetooth: RFCOMM TTY layer initialized [ 121.947460] Bluetooth: RFCOMM socket layer initialized [ 121.947465] Bluetooth: RFCOMM ver 1.11