Section "ServerLayout" Option "AllowMouseOpenFail" "True" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" RgbPath "/etc/X11/rgb" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" EndSection Section "Module" Load "GLcore" Load "dbe" Load "record" Load "xtrap" Load "extmod" Load "glx" Load "dri" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "SHP" ModelName "LL-T17A4-B" ### Comment all HorizSync and VertRefresh values to use DDC: HorizSync 24.0 - 82.0 VertRefresh 55.0 - 77.0 ### ### ### ADDED WITH CORRECTIONS FROM /var/log/xorg.0.log ### THE "DisplaySize" VALUES **MUST** BE GIVEN IN MILLIMETERS!!! ### IT WAS DETECTED BY X -configure BUT WAS ORIGINALLY COMMENTED OUT ### (II) RADEON(0): Max H-Image Size [cm]: horiz.: 34 vert.: 27 DisplaySize 340 270 # mm ### ### ### ADDED WITH CORRECTIONS FROM /var/log/xorg.0.log ### NOT SURE HOW THESE MAP TO THE "Modeline" ENTRIES BELOW ### IF I KNEW THAT, I COULD SPECIFY THE EXACT "Modes" IN THE "SubSection Display" ENTRIES ###(II) RADEON ###(0): Supported VESA Video Modes: ###(II) RADEON ###(0): 720x400@70Hz ###(II) RADEON ###(0): 640x480@60Hz ###(II) RADEON ###(0): 640x480@67Hz ###(II) RADEON ###(0): 640x480@72Hz ###(II) RADEON ###(0): 640x480@75Hz ###(II) RADEON ###(0): 800x600@56Hz ###(II) RADEON ###(0): 800x600@60Hz ###(II) RADEON ###(0): 800x600@72Hz ###(II) RADEON ###(0): 800x600@75Hz ###(II) RADEON ###(0): 832x624@75Hz ###(II) RADEON ###(0): 1024x768@60Hz ###(II) RADEON ###(0): 1024x768@70Hz ###(II) RADEON ###(0): 1024x768@75Hz ###(II) RADEON ###(0): 1280x1024@75Hz ###(II) RADEON ###(0): 1152x870@75Hz ### ### ### ADDED WITH CORRECTIONS FROM /var/log/xorg.0.log ### ### ### NOTICE THE DIFFERENCE BETWEEN THE "xorg.0.log" OUTPUT LINE, AND THE "Active" "Modeline" BELOW IT ###(II) RADEON(0): Printing DDC gathered Modelines: ###(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync # (64.0 kHz) Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync # (37.9 kHz) Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync # (35.2 kHz) Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync # (37.5 kHz) Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync # (37.9 kHz) Modeline "640x480" 30.24 640 704 768 864 480 483 486 525 -hsync -vsync # (35.0 kHz) Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync # (31.5 kHz) Modeline "720x400" 28.32 720 738 846 900 400 412 414 449 -hsync +vsync # (31.5 kHz) Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync # (80.0 kHz) Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync # (60.1 kHz) Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync # (56.5 kHz) Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync # (48.4 kHz) Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync # (49.7 kHz) Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync # (46.9 kHz) Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync # (48.1 kHz) Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync # (67.5 kHz) Modeline "1280x1024" 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync # (63.7 kHz) Modeline "1280x960" 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync # (59.7 kHz) Modeline "1280x1024" 122.25 1280 1368 1496 1712 1024 1027 1034 1067 -hsync +vsync # (71.4 kHz) Modeline "1280x1024" 140.75 1280 1368 1504 1728 1024 1027 1034 1072 -hsync +vsync # (81.5 kHz) Modeline "1152x864" 104.00 1152 1224 1344 1536 864 867 871 905 -hsync +vsync # (67.7 kHz) Modeline "1024x768" 70.75 1024 1080 1184 1344 768 771 775 801 -hsync +vsync # (52.6 kHz) Option "DPMS" EndSection Section "Device" ### Available Driver options are:- ### Values: : integer, : float, : "True"/"False", ### : "String", : " Hz/kHz/MHz" ### [arg]: arg optional #Option "NoAccel" # [] #Option "SWcursor" # [] #Option "Dac6Bit" # [] #Option "Dac8Bit" # [] #Option "BusType" # [] #Option "CPPIOMode" # [] #Option "CPusecTimeout" # #Option "AGPMode" # #Option "AGPFastWrite" # [] #Option "AGPSize" # #Option "GARTSize" # #Option "RingSize" # #Option "BufferSize" # #Option "EnableDepthMoves" # [] #Option "EnablePageFlip" # [] #Option "NoBackBuffer" # [] #Option "DMAForXv" # [] #Option "FBTexPercent" # #Option "DepthBits" # #Option "PCIAPERSize" # #Option "AccelDFS" # [] #Option "DDCMode" # [] #Option "IgnoreEDID" # [] #Option "DisplayPriority" # [] #Option "PanelSize" # [] #Option "ForceMinDotClock" # #Option "ColorTiling" # [] #Option "VideoKey" # #Option "RageTheatreCrystal" # #Option "RageTheatreTunerPort" # #Option "RageTheatreCompositePort" # #Option "RageTheatreSVideoPort" # #Option "TunerType" # #Option "RageTheatreMicrocPath" # #Option "RageTheatreMicrocType" # #Option "ScalerWidth" # #Option "RenderAccel" # [] #Option "SubPixelOrder" # [] #Option "ShowCache" # [] #Option "DynamicClocks" # [] #Option "VGAAccess" # [] #Option "ReverseDDC" # [] #Option "LVDSProbePLL" # [] #Option "AccelMethod" # #Option "DRI" # [] #Option "ConnectorTable" # #Option "DefaultConnectorTable" # [] #Option "DefaultTMDSPLL" # [] #Option "TVDACLoadDetect" # [] #Option "ForceTVOut" # [] #Option "TVStandard" # #Option "IgnoreLidStatus" # [] #Option "DefaultTVDACAdj" # [] #Option "Int10" # [] Identifier "Card0" Driver "radeon" VendorName "ATI Technologies Inc" BoardName "RC410 [Radeon Xpress 200M]" BusID "PCI:1:5:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" ### ### ### ADDED "Modes" ENTRY FROM MODELINE VALUES ### ADDED "DefaultDepth" WITH MODELINE VALUES ### FROM: http://www.x.org/archive/X11R6.8.0/doc/xorg.conf.5.html#sect9 ### The first valid mode in this list will be the default display mode for startup. ### Switch to the next mode with Ctrl+Alt+Keypad-Plus, or previous with Ctrl+Alt+Keypad-Minus. ### If ... no modes, then the selection will be taken from the built-in VESA standard modes. ### DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 8 Modes "1280x1024" "1152x870" "1028x768" "832x624" "800x600" "720x400" "640x480 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 Modes "1280x1024" "1152x870" "1028x768" "832x624" "800x600" "720x400" "640x480 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 Modes "1280x1024" "1152x870" "1028x768" "832x624" "800x600" "720x400" "640x480 EndSubSection ### ### ### NOT SURE IF THESE DEPTHS WORK WITH ALL MODES ### COMMENTING THEM OUT SO I DON'T DAMAGE MY DISPLAY!!! ###SubSection "Display" ### Viewport 0 0 ### Depth 1 ### Modes "1280x1024" "1152x870" "1028x768" "832x624" "800x600" "720x400" "640x480 ###EndSubSection ###SubSection "Display" ### Viewport 0 0 ### Depth 4 ### Modes "1280x1024" "1152x870" "1028x768" "832x624" "800x600" "720x400" "640x480 ###EndSubSection ###SubSection "Display" ### Viewport 0 0 ### Depth 15 ### Modes "1280x1024" "1152x870" "1028x768" "832x624" "800x600" "720x400" "640x480 ###EndSubSection EndSection