Attachment 23376 Details for Bug 20361 – dmesg output

dmesg output

dmesg.log (text/plain), 22.64 KB, created by Alex Kanavin on 2009-02-27 11:06:09 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Alex Kanavin

Created: 2009-02-27 11:06:09 UTC

Size: 22.64 KB

patch

obsolete

>Using PowerMac machine description
>Total memory = 1280MB; using 4096kB for hash table (at cfc00000)
>Initializing cgroup subsys cpu
>Linux version 2.6.27.15-170.2.24.fc10.ppc (mockbuild@ppc3.fedora.redhat.com) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #1 Wed Feb 11 22:56:57 EST 2009
>Found initrd at 0xc1300000:0xc1745400
>Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2
>Mapped at 0xff7c0000
>Found a Intrepid mac-io controller, rev: 0, mapped at 0xff740000
>Processor NAP mode on idle enabled.
>PowerMac motherboard: PowerBook G4 12"
>via-pmu: Server Mode is disabled
>PMU driver v2 initialized for Core99, firmware: 0c
>console [udbg0] enabled
>Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0
>PCI host bridge /pci@f0000000  ranges:
> MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 
>  IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
> MEM 0x0000000090000000..0x00000000afffffff -> 0x0000000090000000 
>Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0
>PCI host bridge /pci@f2000000 (primary) ranges:
> MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000 
>  IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000
> MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000 
>Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0
>PCI host bridge /pci@f4000000  ranges:
> MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000 
>  IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000
>nvram: Checking bank 0...
>nvram: gen0=388, gen1=389
>nvram: Active bank is: 1
>nvram: OF partition at 0x410
>nvram: XP partition at 0x1020
>nvram: NR partition at 0x1120
>Top of RAM: 0x50000000, Total RAM: 0x50000000
>Memory hole size: 0MB
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00030000
>  Normal   0x00030000 -> 0x00030000
>  HighMem  0x00030000 -> 0x00050000
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0: 0x00000000 -> 0x00050000
>On node 0 totalpages: 327680
>free_area_init_node: node 0, pgdat c054a760, node_mem_map c05f5000
>  DMA zone: 195072 pages, LIFO batch:31
>  HighMem zone: 130048 pages, LIFO batch:31
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 325120
>Kernel command line: ro rhgb quiet root=/dev/VolGroup00/LogVol00 video=ofonly
>mpic: Setting up MPIC " MPIC 1   " version 1.2 at 80040000, max 4 CPUs
>mpic: ISU size: 64, shift: 6, mask: 3f
>mpic: Initializing for 64 sources
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>GMT Delta read from XPRAM: 0 minutes, DST: off
>time_init: decrementer frequency = 18.432000 MHz
>time_init: processor frequency   = 1499.999994 MHz
>clocksource: timebase mult[d9038e4] shift[22] registered
>clockevent: decrementer mult[4b7] shift[16] cpu[0]
>Console: colour dummy device 80x25
>console handover: boot [udbg0] -> real [tty0]
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>High memory: 524288k
>Memory: 1283716k/1310720k available (5240k kernel code, 25980k reserved, 192k data, 571k bss, 284k init)
>SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>Calibrating delay loop... 36.73 BogoMIPS (lpj=18368)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Mount-cache hash table entries: 512
>device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1"
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys devices
>net_namespace: 832 bytes
>NET: Registered protocol family 16
>rstcr compatible register does not exist!
>KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
> channel 1 bus /uni-n@f8000000/i2c@f8001000/i2c-bus@1
>KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
> channel 0 bus /pci@f2000000/mac-io@17/i2c@18000/i2c-bus@0
>PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c
> channel 1 bus <multibus>
> channel 2 bus <multibus>
>__ioremap(): phys addr 0x0 is RAM lr c04ef39c
>PCI: Probing PCI hardware
>PCI: 0000:00:10.0 reg 10 32bit mmio: [91000000, 91ffffff]
>PCI: 0000:00:10.0 reg 14 32bit mmio: [a0000000, a7ffffff]
>PCI: 0000:00:10.0 reg 30 32bit mmio: [90000000, 9001ffff]
>PCI: 0001:10:12.0 reg 10 32bit mmio: [80084000, 80085fff]
>pci 0001:10:12.0: supports D1
>pci 0001:10:12.0: supports D2
>pci 0001:10:12.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0001:10:12.0: PME# disabled
>PCI: 0001:10:17.0 reg 10 32bit mmio: [80000000, 8007ffff]
>PCI: 0001:10:18.0 reg 10 32bit mmio: [0, fff]
>PCI: 0001:10:19.0 reg 10 32bit mmio: [0, fff]
>PCI: 0001:10:1a.0 reg 10 32bit mmio: [80083000, 80083fff]
>PCI: 0001:10:1b.0 reg 10 32bit mmio: [80082000, 80082fff]
>pci 0001:10:1b.0: supports D1
>pci 0001:10:1b.0: supports D2
>pci 0001:10:1b.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0001:10:1b.0: PME# disabled
>PCI: 0001:10:1b.1 reg 10 32bit mmio: [80081000, 80081fff]
>pci 0001:10:1b.1: supports D1
>pci 0001:10:1b.1: supports D2
>pci 0001:10:1b.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0001:10:1b.1: PME# disabled
>PCI: 0001:10:1b.2 reg 10 32bit mmio: [80080000, 800800ff]
>pci 0001:10:1b.2: supports D1
>pci 0001:10:1b.2: supports D2
>pci 0001:10:1b.2: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0001:10:1b.2: PME# disabled
>PCI: 0002:20:0d.0 reg 10 32bit mmio: [f5004000, f5007fff]
>PCI: 0002:20:0e.0 reg 10 32bit mmio: [f5000000, f5000fff]
>pci 0002:20:0e.0: supports D1
>pci 0002:20:0e.0: supports D2
>pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot
>pci 0002:20:0e.0: PME# disabled
>PCI: 0002:20:0f.0 reg 10 32bit mmio: [f5200000, f53fffff]
>PCI: 0002:20:0f.0 reg 30 32bit mmio: [f5100000, f51fffff]
>bus: 00 index 0 io port: [802000, 1001fff]
>bus: 00 index 1 mmio: [f1000000, f1ffffff]
>bus: 00 index 2 mmio: [90000000, afffffff]
>bus: 10 index 0 io port: [0, 7fffff]
>bus: 10 index 1 mmio: [f3000000, f3ffffff]
>bus: 10 index 2 mmio: [80000000, 8fffffff]
>bus: 20 index 0 io port: [ff7fe000, ffffdfff]
>bus: 20 index 1 mmio: [f5000000, f5ffffff]
>Registering qe_ic with sysfs...
>Linux Plug and Play Support v0.97 (c) Adam Belay
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Switched to high resolution mode on CPU 0
>tracer: 772 pages allocated for 65536 entries of 48 bytes
>   actual entries 65620
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs... it is
>Freeing initrd memory: 4373k freed
>Thermal assist unit not available
>setup_kcore: restrict size=3fffffff
>Registering PowerMac CPU frequency driver
>Low: 749 Mhz, High: 1499 Mhz, Boot: 749 Mhz
>audit: initializing netlink socket (disabled)
>type=2000 audit(1235760983.964:1): initialized
>highmem bounce pool size: 64 pages
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1493
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:10.0: nv_msi_ht_cap_quirk didn't locate host bridge
>Using unsupported 1920x1200 NVDA,Display-B at a2000000, depth=8, pitch=2048
>Console: switching to colour frame buffer device 240x75
>fb0: Open Firmware frame buffer device on /pci@f0000000/NVDA,Parent@10/NVDA,Display-B@1
>Generic non-volatile memory driver v1.1
>Linux agpgart interface v0.103
>agpgart-uninorth 0000:00:0b.0: Apple UniNorth 2 chipset
>agpgart-uninorth 0000:00:0b.0: configuring for size idx: 8
>agpgart-uninorth 0000:00:0b.0: AGP aperture is 32M @ 0x0
>Serial: 8250/16550 driver4 ports, IRQ sharing enabled
>Serial: MPC52xx PSC UART driver
>brd: module loaded
>loop: module loaded
>Fixed MDIO Bus: probed
>MacIO PCI driver attached to Intrepid chipset
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>apm_emu: PMU APM Emulation initialized.
>Uniform Multi-Platform E-IDE driver
>ide-pmac 0002:20:0d.0: enabling device (0004 -> 0006)
>adb: starting probe task...
>adb devices: [2]: 2 c4 [7]: 7 1f
>ADB keyboard at 2, handler 1
>Detected ADB keyboard, type ISO, swapping keys.
>input: ADB keyboard as /devices/virtual/input/input1
>input: ADB Powerbook buttons as /devices/virtual/input/input2
>adb: finished probe task...
>ide-pmac: Found Apple UniNorth ATA-6 controller (PCI), bus ID 3, irq 39
>Probing IDE interface ide0...
>hda: WDC WD1600BEVE-11UYT0, ATA DISK drive
>hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>hda: UDMA/100 mode selected
>ide0 at 0xf1022000-0xf1022070,0xf1022160 on irq 39
>ide-pmac: Found Apple KeyLargo ATA-3 controller (macio), bus ID 0, irq 24
>Probing IDE interface ide1...
>hdc: MATSHITADVD-R UJ-835E, ATAPI CD/DVD-ROM drive
>hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>hdc: MWDMA2 mode selected
>ide1 at 0xf101a000-0xf101a070,0xf101a160 on irq 24
>hda: max request size: 512KiB
>hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63
>hda: cache flushes supported
> hda: [mac] hda1 hda2 hda3 hda4 hda5 hda6 hda7 hda8 hda9 hda10 hda11
>Driver 'sd' needs updating - please use bus_type methods
>Driver 'sr' needs updating - please use bus_type methods
>ehci_hcd 0001:10:1b.2: enabling device (0004 -> 0006)
>ehci_hcd 0001:10:1b.2: EHCI Host Controller
>ehci_hcd 0001:10:1b.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0001:10:1b.2: irq 63, io mem 0x80080000
>ehci_hcd 0001:10:1b.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 5 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.27.15-170.2.24.fc10.ppc ehci_hcd
>usb usb1: SerialNumber: 0001:10:1b.2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>Apple USB OHCI 0001:10:18.0 disabled by firmware
>Apple USB OHCI 0001:10:19.0 disabled by firmware
>ohci_hcd 0001:10:1a.0: enabling device (0000 -> 0002)
>ohci_hcd 0001:10:1a.0: OHCI Host Controller
>ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0001:10:1a.0: irq 29, io mem 0x80083000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb 1-2: new high speed USB device using ehci_hcd and address 2
>usb 1-2: configuration #1 chosen from 1 choice
>hub 1-2:1.0: USB hub found
>hub 1-2:1.0: 3 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.27.15-170.2.24.fc10.ppc ohci_hcd
>usb usb2: SerialNumber: 0001:10:1a.0
>ohci_hcd 0001:10:1b.0: enabling device (0000 -> 0002)
>ohci_hcd 0001:10:1b.0: OHCI Host Controller
>ohci_hcd 0001:10:1b.0: new USB bus registered, assigned bus number 3
>ohci_hcd 0001:10:1b.0: irq 63, io mem 0x80082000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 3 ports detected
>usb 1-2: New USB device found, idVendor=05ac, idProduct=911c
>usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: OHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.27.15-170.2.24.fc10.ppc ohci_hcd
>usb usb3: SerialNumber: 0001:10:1b.0
>ohci_hcd 0001:10:1b.1: enabling device (0000 -> 0002)
>ohci_hcd 0001:10:1b.1: OHCI Host Controller
>ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 4
>ohci_hcd 0001:10:1b.1: irq 63, io mem 0x80081000
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 2-1: new full speed USB device using ohci_hcd and address 2
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: OHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.27.15-170.2.24.fc10.ppc ohci_hcd
>usb usb4: SerialNumber: 0001:10:1b.1
>USB Universal Host Controller Interface driver v3.0
>mice: PS/2 mouse device common for all mice
>platform ppc-rtc.0: rtc core: registered ppc_md as rtc0
>PowerMac i2c bus pmu 2 registered
>PowerMac i2c bus pmu 1 registered
>PowerMac i2c bus mac-io 0 registered
>PowerMac i2c bus uni-n 1 registered
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>usb 2-1: configuration #1 chosen from 1 choice
>usb 2-1: New USB device found, idVendor=05ac, idProduct=1000
>usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 2-2: new full speed USB device using ohci_hcd and address 3
>usb 2-2: configuration #1 chosen from 1 choice
>usb 2-2: New USB device found, idVendor=05ac, idProduct=030a
>usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-2: Product: Apple Internal Trackpad
>usb 2-2: Manufacturer: Apple Computer
>usb 1-2.1: new low speed USB device using ehci_hcd and address 3
>usb 1-2.1: configuration #1 chosen from 1 choice
>usb 1-2.1: New USB device found, idVendor=046d, idProduct=c00e
>usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-2.1: Product: USB-PS/2 Optical Mouse
>usb 1-2.1: Manufacturer: Logitech
>usb 1-2.2: new full speed USB device using ehci_hcd and address 4
>usb 1-2.2: configuration #1 chosen from 1 choice
>usb 1-2.2: New USB device found, idVendor=05ac, idProduct=921c
>usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-2.2: Product: Apple Cinema HD Display
>usb 1-2.2: Manufacturer: Apple Computer, Inc.
>usb 1-2.3: new full speed USB device using ehci_hcd and address 5
>usb 1-2.3: configuration #1 chosen from 1 choice
>hub 1-2.3:1.0: USB hub found
>hub 1-2.3:1.0: 3 ports detected
>usb 1-2.3: New USB device found, idVendor=05ac, idProduct=1003
>usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-2.3: Product: Hub in Apple Extended USB Keyboard
>usb 1-2.3: Manufacturer: Mitsumi Electric
>usb 1-2.3.3: new full speed USB device using ehci_hcd and address 6
>usb 1-2.3.3: configuration #1 chosen from 1 choice
>usb 1-2.3.3: New USB device found, idVendor=05ac, idProduct=020c
>usb 1-2.3.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0
>usb 1-2.3.3: Product: Apple Extended USB Keyboard
>usb 1-2.3.3: Manufacturer: Mitsumi Electric
>usbcore: registered new interface driver hiddev
>input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb2/2-1/2-1:1.0/input/input3
>input,hidraw0: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0001:10:1a.0-1
>input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb2/2-1/2-1:1.1/input/input4
>input,hidraw1: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0001:10:1a.0-1
>input: Logitech USB-PS/2 Optical Mouse as /devices/pci0001:10/0001:10:1b.2/usb1/1-2/1-2.1/1-2.1:1.0/input/input5
>input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0001:10:1b.2-2.1
>hiddev96hidraw3: USB HID v1.11 Device [Apple Computer, Inc. Apple Cinema HD Display] on usb-0001:10:1b.2-2.2
>input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:10/0001:10:1b.2/usb1/1-2/1-2.3/1-2.3.3/1-2.3.3:1.0/input/input6
>input,hidraw4: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:10:1b.2-2.3.3
>input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:10/0001:10:1b.2/usb1/1-2/1-2.3/1-2.3.3/1-2.3.3:1.1/input/input7
>input,hidraw5: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:10:1b.2-2.3.3
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
>nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>registered taskstats version 1
>input: PMU as /devices/virtual/input/input8
>Registered led device: pmu-front-led
>Freeing unused kernel memory: 284k init
>firewire_ohci 0002:20:0e.0: enabling device (0000 -> 0002)
>firewire_ohci: Added fw-ohci device 0002:20:0e.0, OHCI version 1.10
>firewire_core: created device fw0: GUID 001124fffe871160, S400
>scsi0 : SBP-2 IEEE-1394
>firewire_sbp2: Workarounds for fw1.0: 0x20 (firmware_revision 0x012804, model_id 0x000001)
>firewire_core: created device fw1: GUID 0050770e00071002, S400
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_sbp2: fw1.0: logged in to LUN 0000 (0 retries)
>scsi 0:0:0:0: Direct-Access-RBC WDC WD80 0JB-00JJA0            PQ: 0 ANSI: 4
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 11 00 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 11 00 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: [mac] sda1 sda2 sda3 sda4
>sd 0:0:0:0: [sda] Attached SCSI disk
>sd 0:0:0:0: Attached scsi generic sg0 type 14
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>type=1404 audit(1235761012.214:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>SELinux: 8192 avtab hash slots, 114414 rules.
>SELinux: 8192 avtab hash slots, 114414 rules.
>SELinux:  8 users, 11 roles, 2673 types, 121 bools, 1 sens, 1024 cats
>SELinux:  73 classes, 114414 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>type=1403 audit(1235761013.119:3): policy loaded auid=4294967295 ses=4294967295
>udevd version 127 started
>b43-pci-bridge 0001:10:12.0: enabling device (0004 -> 0006)
>ssb: Sonics Silicon Backplane found on PCI device 0001:10:12.0
>pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
>ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port
>ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port
>hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
>Uniform CD-ROM driver Revision: 3.20
>input: appletouch as /devices/pci0001:10/0001:10:1a.0/usb2/2-2/2-2:1.0/input/input9
>usbcore: registered new interface driver appletouch
>sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com)
>PHY ID: 4061e4, addr: 0
>eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:11:24:87:11:60
>eth0: Found BCM5221 PHY
>b43-phy0: Broadcom 4306 WLAN found
>b43-phy0 debug: Found PHY: Analog 2, Type 2, Revision 2
>b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
>phy0: Selected rate control algorithm 'pid'
>Broadcom 43xx driver loaded [ Features: PMLR, Firmware-ID: FW13 ]
>snd-aoa-fabric-layout: found bus with layout 72
>snd-aoa-fabric-layout: Using PMF GPIOs
>snd-aoa-codec-tas: found tas3004
>snd-aoa-fabric-layout: can use this codec
>snd-aoa-codec-tas: tas found, addr 0x35 on /pci@f2000000/mac-io@17/i2c@18000/i2c-bus@0/codec@6a
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda3, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 2588664k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:2588664k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.13
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.11
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: SCO (Voice Link) ver 0.6
>Bluetooth: SCO socket layer initialized
>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>Bluetooth: BNEP filters: protocol multicast
>Bridge firewalling registered
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>input: b43-phy0 as /devices/virtual/input/input10
>firmware: requesting b43/ucode5.fw
>firmware: requesting b43/pcm5.fw
>firmware: requesting b43/b0g0initvals5.fw
>firmware: requesting b43/b0g0bsinitvals5.fw
>b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
>b43-phy0 debug: Chip initialized
>b43-phy0 debug: 30-bit DMA initialized
>Registered led device: b43-phy0::tx
>Registered led device: b43-phy0::rx
>Registered led device: b43-phy0::radio
>b43-phy0 debug: Wireless interface started
>b43-phy0 debug: Adding Interface type 2
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[drm] Initialized drm 1.1.0 20060810
>[drm] Detected an NV30 generation card (0x034900b1)
>[drm] Initialized nouveau 0.0.11 20060213 on minor 0
>[drm] OF bios successfully copied (2947 bytes)
>[drm] OF bios successfully copied (2947 bytes)
>[drm] OF bios successfully copied (2947 bytes)
>[drm] OF bios successfully copied (2947 bytes)
>[drm] Allocating FIFO number 0
>[drm] nouveau_fifo_alloc: initialised FIFO 0
>[drm] Allocating FIFO number 1
>[drm] nouveau_fifo_alloc: initialised FIFO 1

Actions: View

Attachments on bug 20361: 23375 | 23376 | 23377 | 23378

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.