Attachment 28331 Details for Bug 23126 – Xorg log w/ 2.2.2

Xorg log w/ 2.2.2

Xorg.0.log (text/plain), 21.69 KB, created by Elias Pipping on 2009-08-03 21:50:03 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Elias Pipping

Created: 2009-08-03 21:50:03 UTC

Size: 21.69 KB

patch

obsolete

>
>X.Org X Server 1.6.3
>Release Date: 2009-7-31
>X Protocol Version 11, Revision 0
>Build Operating System: Linux 2.6.30.4 x86_64 
>Current Operating System: Linux bogus 2.6.31-rc5 #1 SMP Sun Aug 2 01:52:16 CEST 2009 x86_64
>Build Date: 03 August 2009  02:16:47AM
> 
>	Before reporting problems, check http://wiki.x.org
>	to make sure that you have the latest version.
>Markers: (--) probed, (**) from config file, (==) default setting,
>	(++) from command line, (!!) notice, (II) informational,
>	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>(==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug  4 06:48:43 2009
>(II) Loader magic: 0x1720
>(II) Module ABI versions:
>	X.Org ANSI C Emulation: 0.4
>	X.Org Video Driver: 5.0
>	X.Org XInput driver : 4.0
>	X.Org Server Extension : 2.0
>(II) Loader running on linux
>(--) using VT number 7
>
>(--) PCI:*(0:0:2:0) 8086:2a42:17aa:20e4 Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf0000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
>(--) PCI: (0:0:2:1) 8086:2a43:17aa:20e4 Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf0400000/1048576
>(==) Using default built-in configuration (39 lines)
>(==) --- Start of built-in configuration ---
>	Section "Device"
>		Identifier	"Builtin Default intel Device 0"
>		Driver	"intel"
>	EndSection
>	Section "Screen"
>		Identifier	"Builtin Default intel Screen 0"
>		Device	"Builtin Default intel Device 0"
>	EndSection
>	Section "Device"
>		Identifier	"Builtin Default i810 Device 0"
>		Driver	"i810"
>	EndSection
>	Section "Screen"
>		Identifier	"Builtin Default i810 Screen 0"
>		Device	"Builtin Default i810 Device 0"
>	EndSection
>	Section "Device"
>		Identifier	"Builtin Default vesa Device 0"
>		Driver	"vesa"
>	EndSection
>	Section "Screen"
>		Identifier	"Builtin Default vesa Screen 0"
>		Device	"Builtin Default vesa Device 0"
>	EndSection
>	Section "Device"
>		Identifier	"Builtin Default fbdev Device 0"
>		Driver	"fbdev"
>	EndSection
>	Section "Screen"
>		Identifier	"Builtin Default fbdev Screen 0"
>		Device	"Builtin Default fbdev Device 0"
>	EndSection
>	Section "ServerLayout"
>		Identifier	"Builtin Default Layout"
>		Screen	"Builtin Default intel Screen 0"
>		Screen	"Builtin Default i810 Screen 0"
>		Screen	"Builtin Default vesa Screen 0"
>		Screen	"Builtin Default fbdev Screen 0"
>	EndSection
>(==) --- End of built-in configuration ---
>(==) ServerLayout "Builtin Default Layout"
>(**) |-->Screen "Builtin Default intel Screen 0" (0)
>(**) |   |-->Monitor "<default monitor>"
>(**) |   |-->Device "Builtin Default intel Device 0"
>(==) No monitor specified for screen "Builtin Default intel Screen 0".
>	Using a default monitor configuration.
>(**) |-->Screen "Builtin Default i810 Screen 0" (1)
>(**) |   |-->Monitor "<default monitor>"
>(**) |   |-->Device "Builtin Default i810 Device 0"
>(==) No monitor specified for screen "Builtin Default i810 Screen 0".
>	Using a default monitor configuration.
>(**) |-->Screen "Builtin Default vesa Screen 0" (2)
>(**) |   |-->Monitor "<default monitor>"
>(**) |   |-->Device "Builtin Default vesa Device 0"
>(==) No monitor specified for screen "Builtin Default vesa Screen 0".
>	Using a default monitor configuration.
>(**) |-->Screen "Builtin Default fbdev Screen 0" (3)
>(**) |   |-->Monitor "<default monitor>"
>(**) |   |-->Device "Builtin Default fbdev Device 0"
>(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
>	Using a default monitor configuration.
>(==) Automatically adding devices
>(==) Automatically enabling devices
>(WW) The directory "/usr/lib64/X11/fonts/OTF" does not exist.
>	Entry deleted from font path.
>(WW) The directory "/usr/lib64/X11/fonts/Type1/" does not exist.
>	Entry deleted from font path.
>(==) FontPath set to:
>	/usr/lib64/X11/fonts/misc/,
>	/usr/lib64/X11/fonts/TTF/,
>	/usr/lib64/X11/fonts/100dpi/,
>	/usr/lib64/X11/fonts/75dpi/,
>	built-ins
>(==) ModulePath set to "/usr/lib64/xorg/modules"
>(II) Cannot locate a core pointer device.
>(II) Cannot locate a core keyboard device.
>(II) The server relies on HAL to provide the list of input devices.
>	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
>(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
>(II) No APM support in BIOS or kernel
>(II) System resource ranges:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>(II) LoadModule: "extmod"
>(II) Loading /usr/lib64/xorg/modules/extensions//libextmod.so
>(II) Module extmod: vendor="X.Org Foundation"
>	compiled for 1.6.3, module version = 1.0.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension MIT-SCREEN-SAVER
>(II) Loading extension XFree86-VidModeExtension
>(II) Loading extension XFree86-DGA
>(II) Loading extension DPMS
>(II) Loading extension XVideo
>(II) Loading extension XVideo-MotionCompensation
>(II) Loading extension X-Resource
>(II) LoadModule: "dbe"
>(II) Loading /usr/lib64/xorg/modules/extensions//libdbe.so
>(II) Module dbe: vendor="X.Org Foundation"
>	compiled for 1.6.3, module version = 1.0.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension DOUBLE-BUFFER
>(II) LoadModule: "glx"
>(II) Loading /usr/lib64/xorg/modules/extensions//libglx.so
>(II) Module glx: vendor="X.Org Foundation"
>	compiled for 1.6.3, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 2.0
>(==) AIGLX enabled
>(II) Loading extension GLX
>(II) LoadModule: "dri"
>(II) Loading /usr/lib64/xorg/modules/extensions//libdri.so
>(II) Module dri: vendor="X.Org Foundation"
>	compiled for 1.6.3, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension XFree86-DRI
>(II) LoadModule: "dri2"
>(II) Loading /usr/lib64/xorg/modules/extensions//libdri2.so
>(II) Module dri2: vendor="X.Org Foundation"
>	compiled for 1.6.3, module version = 1.1.0
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension DRI2
>(II) LoadModule: "intel"
>(II) Loading /usr/lib64/xorg/modules/drivers//intel_drv.so
>(II) Module intel: vendor="X.Org Foundation"
>	compiled for 1.6.2, module version = 2.8.0
>	Module class: X.Org Video Driver
>	ABI class: X.Org Video Driver, version 5.0
>(II) LoadModule: "i810"
>(WW) Warning, couldn't open module i810
>(II) UnloadModule: "i810"
>(EE) Failed to load module "i810" (module does not exist, 0)
>(II) LoadModule: "vesa"
>(WW) Warning, couldn't open module vesa
>(II) UnloadModule: "vesa"
>(EE) Failed to load module "vesa" (module does not exist, 0)
>(II) LoadModule: "fbdev"
>(WW) Warning, couldn't open module fbdev
>(II) UnloadModule: "fbdev"
>(EE) Failed to load module "fbdev" (module does not exist, 0)
>(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
>	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
>	E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
>	965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
>	Mobile IntelÂ® GM45 Express Chipset,
>	Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41, IGDNG_D,
>	IGDNG_M
>(II) Primary Device is: PCI 00@00:02:0
>(II) resource ranges after xf86ClaimFixedResources() call:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>(II) resource ranges after probing:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
>	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
>	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
>	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
>	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
>(II) Loading sub module "vgahw"
>(II) LoadModule: "vgahw"
>(II) Loading /usr/lib64/xorg/modules//libvgahw.so
>(II) Module vgahw: vendor="X.Org Foundation"
>	compiled for 1.6.3, module version = 0.1.0
>	ABI class: X.Org Video Driver, version 5.0
>(II) Loading sub module "ramdac"
>(II) LoadModule: "ramdac"
>(II) Module "ramdac" already built-in
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 7, (OK)
>drmOpenByBusid: Searching for BusID pci:0000:00:02.0
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 7, (OK)
>drmOpenByBusid: drmOpenMinor returns 7
>drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
>(II) intel(0): Creating default Display subsection in Screen section
>	"Builtin Default intel Screen 0" for depth/fbbpp 24/32
>(==) intel(0): Depth 24, (--) framebuffer bpp 32
>(==) intel(0): RGB weight 888
>(==) intel(0): Default visual is TrueColor
>(II) intel(0): Integrated Graphics Chipset: Intel(R) Mobile IntelÂ® GM45 Express Chipset
>(--) intel(0): Chipset: "Mobile IntelÂ® GM45 Express Chipset"
>(--) intel(0): Linear framebuffer at 0xD0000000
>(--) intel(0): IO registers at addr 0xF0000000 size 4194304
>(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
>(II) intel(0): No SDVO device is found in VBT
>(II) intel(0): 2 display pipes available.
>(II) Loading sub module "ddc"
>(II) LoadModule: "ddc"
>(II) Module "ddc" already built-in
>(II) Loading sub module "i2c"
>(II) LoadModule: "i2c"
>(II) Module "i2c" already built-in
>(II) intel(0): Output VGA has no monitor section
>(II) intel(0): Output LVDS has no monitor section
>(II) intel(0): I2C bus "LVDSDDC_C" initialized.
>(II) intel(0): Attempting to determine panel fixed mode.
>(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
>(II) intel(0): EDID vendor "LEN", prod id 16500
>(II) intel(0): found backlight control method /sys/class/backlight/acpi_video0
>(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
>(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
>(II) intel(0): No SDVO device found on SDVOB
>(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
>(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
>(II) intel(0): Output HDMI-1 has no monitor section
>(II) intel(0): I2C bus "HDMIDDC_B" initialized.
>(II) intel(0): HDMI output 1 detected
>(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
>(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
>(II) intel(0): No SDVO device found on SDVOC
>(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
>(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
>(II) intel(0): EDID vendor "LEN", prod id 16500
>(II) intel(0): Output VGA disconnected
>(II) intel(0): Output LVDS connected
>(II) intel(0): Output HDMI-1 disconnected
>(II) intel(0): Using exact sizes for initial modes
>(II) intel(0): Output LVDS using initial mode 1440x900
>(II) intel(0): detected 512 kB GTT.
>(II) intel(0): detected 32764 kB stolen memory.
>(==) intel(0): video overlay key set to 0x101fe
>(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
>(==) intel(0): DPI set to (96, 96)
>(II) Loading sub module "fb"
>(II) LoadModule: "fb"
>(II) Loading /usr/lib64/xorg/modules//libfb.so
>(II) Module fb: vendor="X.Org Foundation"
>	compiled for 1.6.3, module version = 1.0.0
>	ABI class: X.Org ANSI C Emulation, version 0.4
>(II) intel(0): Comparing regs from server start up to After PreInit
>(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
>(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
>(WW) intel(0): PP_STATUS after: on, ready, sequencing on
>(WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x00000000 to 0x20000120
>(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000206 to 0x80000246
>(WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
>(WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS LBLC_EVENT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
>(WW) intel(0): Register 0x321b (FBC_FENCE_OFF) changed from 0x0c029900 to 0x0c029000
>(==) Depth 24 pixmap format is 32 bpp
>(II) do I need RAC?  No, I don't.
>(II) resource ranges after preInit:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
>	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
>	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
>	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
>	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
>(II) intel(0): Kernel reported 1248000 total, 1 used
>(II) intel(0): I830CheckAvailableMemory: 4991996 kB available
>(II) intel(0): [DRI2] Setup complete
>(**) intel(0): Framebuffer compression enabled
>(**) intel(0): Tiling enabled
>(**) intel(0): SwapBuffers wait enabled
>(==) intel(0): VideoRam: 262144 KB
>(II) intel(0): Attempting memory allocation with tiled buffers.
>(II) intel(0): Tiled allocation successful.
>(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
>(II) UXA(0): Driver registered support for the following operations:
>(II)         solid
>(II)         copy
>(II)         composite (RENDER acceleration)
>(==) intel(0): Backing store disabled
>(==) intel(0): Silken mouse enabled
>(II) intel(0): Initializing HW Cursor
>(II) intel(0): Fixed memory allocation layout:
>(II) intel(0): 0x00000000-0x00086fff: compressed frame buffer (540 kB, 0x00000000be000000 physical
>)
>(II) intel(0): 0x00087000-0x00087fff: power context (4 kB)
>(II) intel(0): 0x01fff000:            end of stolen memory
>(II) intel(0): 0x01fff000-0x0f9fefff: DRI memory manager (223232 kB)
>(II) intel(0): 0x10000000:            end of aperture
>(II) intel(0): BO memory allocation layout:
>(II) intel(0): 0x01fff000:            start of memory manager
>(II) intel(0): 0x02020000-0x02565fff: front buffer (5400 kB) X tiled
>(II) intel(0): 0x02820000-0x02829fff: HW cursors (40 kB)
>(II) intel(0): 0x0f9ff000:            end of memory manager
>(WW) intel(0): ESR is 0x00000011, page table error
>(WW) intel(0): PGTBL_ER is 0x00100000, CS instruction GTT PTE
>(WW) intel(0): Existing errors found in hardware state.
>(II) intel(0): using SSC reference clock of 100 MHz
>(II) intel(0): Selecting standard 18 bit TMDS pixel format.
>(II) intel(0): Output configuration:
>(II) intel(0):   Pipe A is off
>(II) intel(0):   Display plane A is now disabled and connected to pipe A.
>(II) intel(0):   Pipe B is on
>(II) intel(0):   Display plane B is now enabled and connected to pipe B.
>(II) intel(0):   Output VGA is connected to pipe none
>(II) intel(0):   Output LVDS is connected to pipe B
>(II) intel(0):   Output HDMI-1 is connected to pipe none
>(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
>(II) intel(0): DPMS enabled
>(==) intel(0): Intel XvMC decoder disabled
>(II) intel(0): Set up textured video
>(II) intel(0): direct rendering: DRI2 Enabled
>(--) RandR disabled
>(II) Initializing built-in extension Generic Event Extension
>(II) Initializing built-in extension SHAPE
>(II) Initializing built-in extension MIT-SHM
>(II) Initializing built-in extension XInputExtension
>(II) Initializing built-in extension XTEST
>(II) Initializing built-in extension BIG-REQUESTS
>(II) Initializing built-in extension SYNC
>(II) Initializing built-in extension XKEYBOARD
>(II) Initializing built-in extension XC-MISC
>(II) Initializing built-in extension XFIXES
>(II) Initializing built-in extension RENDER
>(II) Initializing built-in extension RANDR
>(II) Initializing built-in extension COMPOSITE
>(II) Initializing built-in extension DAMAGE
>(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
>(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
>(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
>(II) AIGLX: Loaded and initialized /usr/lib64/dri/i965_dri.so
>(II) GLX: Initialized DRI2 GL provider for screen 0
>(II) intel(0): Setting screen physical size to 287 x 180
>(II) config/hal: Adding input device Video Bus
>(II) LoadModule: "evdev"
>(II) Loading /usr/lib64/xorg/modules/input//evdev_drv.so
>(II) Module evdev: vendor="X.Org Foundation"
>	compiled for 1.6.3, module version = 2.2.2
>	Module class: X.Org XInput Driver
>	ABI class: X.Org XInput driver, version 4.0
>(**) Video Bus: always reports core events
>(**) Video Bus: Device: "/dev/input/event10"
>(II) Video Bus: Found keys
>(II) Video Bus: Configuring as keyboard
>(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
>(**) Option "xkb_rules" "evdev"
>(**) Option "xkb_model" "evdev"
>(**) Option "xkb_layout" "us"
>(II) config/hal: Adding input device AlpsPS/2 ALPS DualPoint TouchPad
>(**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
>(**) AlpsPS/2 ALPS DualPoint TouchPad: Device: "/dev/input/event9"
>(II) AlpsPS/2 ALPS DualPoint TouchPad: Found 3 mouse buttons
>(II) AlpsPS/2 ALPS DualPoint TouchPad: Found x and y relative axes
>(II) AlpsPS/2 ALPS DualPoint TouchPad: Found x and y absolute axes
>(II) AlpsPS/2 ALPS DualPoint TouchPad: Found absolute touchpad
>(II) AlpsPS/2 ALPS DualPoint TouchPad: Configuring as touchpad
>(**) AlpsPS/2 ALPS DualPoint TouchPad: YAxisMapping: buttons 4 and 5
>(**) AlpsPS/2 ALPS DualPoint TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
>(II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD)
>(**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping acceleration scheme 1
>(**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) filter chain progression: 2.00
>(**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) filter stage 0: 20.00 ms
>(**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) set acceleration profile 0
>(II) config/hal: Adding input device DualPoint Stick
>(**) DualPoint Stick: always reports core events
>(**) DualPoint Stick: Device: "/dev/input/event8"
>(II) DualPoint Stick: Found 3 mouse buttons
>(II) DualPoint Stick: Found x and y relative axes
>(II) DualPoint Stick: Configuring as mouse
>(**) DualPoint Stick: YAxisMapping: buttons 4 and 5
>(**) DualPoint Stick: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
>(II) XINPUT: Adding extended input device "DualPoint Stick" (type: MOUSE)
>(**) DualPoint Stick: (accel) keeping acceleration scheme 1
>(**) DualPoint Stick: (accel) filter chain progression: 2.00
>(**) DualPoint Stick: (accel) filter stage 0: 20.00 ms
>(**) DualPoint Stick: (accel) set acceleration profile 0
>(II) config/hal: Adding input device AT Translated Set 2 keyboard
>(**) AT Translated Set 2 keyboard: always reports core events
>(**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
>(II) AT Translated Set 2 keyboard: Found keys
>(II) AT Translated Set 2 keyboard: Configuring as keyboard
>(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
>(**) Option "xkb_rules" "evdev"
>(**) Option "xkb_model" "evdev"
>(**) Option "xkb_layout" "us"
>(II) intel(0): EDID vendor "LEN", prod id 16500
>(II) intel(0): Using EDID range info for horizontal sync
>(II) intel(0): Using EDID range info for vertical refresh
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1440x900"x0.0  102.00  1440 1488 1520 1836  900 903 909 926 -hsync -vsync (55.6 kHz)
>(II) intel(0): Modeline "1440x900"x0.0   85.00  1440 1488 1520 1836  900 903 909 926 -hsync -vsync (46.3 kHz)
>(II) intel(0): EDID vendor "LEN", prod id 16500
>(II) intel(0): EDID vendor "LEN", prod id 16500
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1440x900"x0.0  102.00  1440 1488 1520 1836  900 903 909 926 -hsync -vsync (55.6 kHz)
>(II) intel(0): Modeline "1440x900"x0.0   85.00  1440 1488 1520 1836  900 903 909 926 -hsync -vsync (46.3 kHz)
>(II) intel(0): EDID vendor "LEN", prod id 16500
>(II) intel(0): EDID vendor "LEN", prod id 16500
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1440x900"x0.0  102.00  1440 1488 1520 1836  900 903 909 926 -hsync -vsync (55.6 kHz)
>(II) intel(0): Modeline "1440x900"x0.0   85.00  1440 1488 1520 1836  900 903 909 926 -hsync -vsync (46.3 kHz)
>(II) intel(0): EDID vendor "LEN", prod id 16500
>(II) intel(0): EDID vendor "LEN", prod id 16500
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1440x900"x0.0  102.00  1440 1488 1520 1836  900 903 909 926 -hsync -vsync (55.6 kHz)
>(II) intel(0): Modeline "1440x900"x0.0   85.00  1440 1488 1520 1836  900 903 909 926 -hsync -vsync (46.3 kHz)
>(II) intel(0): EDID vendor "LEN", prod id 16500
>(II) intel(0): EDID vendor "LEN", prod id 16500
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1440x900"x0.0  102.00  1440 1488 1520 1836  900 903 909 926 -hsync -vsync (55.6 kHz)
>(II) intel(0): Modeline "1440x900"x0.0   85.00  1440 1488 1520 1836  900 903 909 926 -hsync -vsync (46.3 kHz)
>(II) intel(0): EDID vendor "LEN", prod id 16500
>(II) intel(0): EDID vendor "LEN", prod id 16500
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1440x900"x0.0  102.00  1440 1488 1520 1836  900 903 909 926 -hsync -vsync (55.6 kHz)
>(II) intel(0): Modeline "1440x900"x0.0   85.00  1440 1488 1520 1836  900 903 909 926 -hsync -vsync (46.3 kHz)
>(II) intel(0): EDID vendor "LEN", prod id 16500

Actions: View

Attachments on bug 23126: 28329 | 28330 | 28331 | 28334 | 28340 | 28341 | 28355 | 28364 | 28388

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.