Attachment 31654 Details for Bug 25393 – dmesg | tail -n 150

dmesg | tail -n 150

dmesg.log (text/plain), 8.72 KB, created by Tomas M on 2009-12-02 05:08:42 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Tomas M

Created: 2009-12-02 05:08:42 UTC

Size: 8.72 KB

patch

obsolete

> sdb: sdb1 sdb2 sdb3
>sd 2:0:0:0: [sdb] Assuming drive cache: write through
>sd 2:0:0:0: [sdb] Attached SCSI disk
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>sky2 eth0: enabling interface
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
>[drm] nouveau 0000:01:00.0: Allocating FIFO number 1
>[drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
>[drm:drm_mode_getfb] *ERROR* invalid framebuffer id
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 1)
>[drm] nouveau 0000:01:00.0: Calling LVDS script 6:
>[drm] nouveau 0000:01:00.0: 0xD202: Parsing digital output script table
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
>[drm] nouveau 0000:01:00.0: vpll: n 22 m 5 log2p 0
>[drm] DAC-7: set mode 1680x1050 31
>[drm] nouveau 0000:01:00.0: nv04_dac_mode_set called for encoder 0
>[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
>[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
>[drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
>[drm] nouveau 0000:01:00.0: vpll: n 21 m 4 log2p 1
>[drm] LVDS-8: set mode 1280x800 34
>[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 1
>[drm] nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 1
>[drm] nouveau 0000:01:00.0: Calling LVDS script 2:
>[drm] nouveau 0000:01:00.0: 0xD262: Parsing digital output script table
>[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 1)
>[drm] nouveau 0000:01:00.0: Calling LVDS script 5:
>[drm] nouveau 0000:01:00.0: 0xD1DE: Parsing digital output script table
>[drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 1 using output A
>eth1: no IPv6 routers present
>usb 1-1.2.1: new high speed USB device using ehci_hcd and address 7
>usb 1-1.2.1: New USB device found, idVendor=046d, idProduct=09a1
>usb 1-1.2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=2
>usb 1-1.2.1: SerialNumber: 59E69D20
>usb 1-1.2.1: configuration #1 chosen from 1 choice
>usbcore: registered new interface driver snd-usb-audio
>Linux video capture interface: v2.00
>uvcvideo: Found UVC 1.00 device <unnamed> (046d:09a1)
>input: UVC Camera (046d:09a1) as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/input/input10
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (v0.1.0)
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>lib80211_crypt: registered algorithm 'WEP'
>spurious 8259A interrupt: IRQ7.
>hub 1-1.2:1.0: port 4 disabled by hub (EMI?), re-enabling...
>usb 1-1.2.4: USB disconnect, address 5
>usb 1-1.2.4: new low speed USB device using ehci_hcd and address 8
>usb 1-1.2.4: New USB device found, idVendor=1267, idProduct=0103
>usb 1-1.2.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 1-1.2.4: configuration #1 chosen from 1 choice
>input: HID 1267:0103 as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4:1.0/input/input11
>generic-usb 0003:1267:0103.0004: input,hidraw1: USB HID v1.10 Keyboard [HID 1267:0103] on usb-0000:00:1d.7-1.2.4/input0
>input: HID 1267:0103 as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4:1.1/input/input12
>generic-usb 0003:1267:0103.0005: input,hidraw2: USB HID v1.10 Device [HID 1267:0103] on usb-0000:00:1d.7-1.2.4/input1
>npviewer.bin[2549] general protection ip:129d04c sp:bf9f5b50 error:0 in libflashplayer.so[f2d000+990000]
>SELinux: 8192 avtab hash slots, 149515 rules.
>SELinux: 8192 avtab hash slots, 149515 rules.
>SELinux:  8 users, 12 roles, 3057 types, 139 bools, 1 sens, 1024 cats
>SELinux:  75 classes, 149515 rules
>[TTM] Failed moving buffer. Proposed placement 0x00070004
>[TTM] Out of aperture space or DRM memory quota.
>[TTM] Failed moving buffer. Proposed placement 0x00070004
>[TTM] Out of aperture space or DRM memory quota.
>[TTM] Failed moving buffer. Proposed placement 0x00070004
>[TTM] Out of aperture space or DRM memory quota.
>[TTM] Failed moving buffer. Proposed placement 0x00070004
>[TTM] Out of aperture space or DRM memory quota.
>[drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1
>[drm:edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 16
>[drm:edid_is_valid] *ERROR* Raw EDID:
><3>00 ff ff ff ff ff ff 00 4c 2d e4 03 32 32 57 54  ........L-..22WT
><3>18 12 01 03 0e 2f 1e 78 2a ee 91 b3 54 4c 99 26  ...../.x*...TL.&
><3>0f 50 54 bf ef 80 b3 00 81 80 81 40 71 4f 01 01  .PT........@qO..
><3>01 01 01 01 01 01 7c 2e 90 a0 60 1a 1e 40 30 20  ......|...`..@0 
><3>36 00 da 28 11 00 00 1a 00 00 00 fd 00 38 4b 1e  6..(.........8K.
><3>51 0e 00 0a 20 20 20 20 20 20 00 00 00 fc 00 53  Q...      .....S
><3>79 6e 63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff  yncMaster.  ....
><3>00 48 56 42 51 36 30 39 34 38 37 0a 20 20 00 96  .HVBQ609487.  ..
>
>nouveau 0000:01:00.0: VGA-1: EDID invalid.
>[drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
>[drm:edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 1
>[drm:edid_is_valid] *ERROR* Raw EDID:
><3>00 ff ff ff ff ff ff 00 4c 2d e4 03 32 32 57 54  ........L-..22WT
><3>18 12 01 03 0f 2f 1e 78 2a ee 91 a3 54 4c 99 26  ...../.x*...TL.&
><3>0f 50 54 bf ef 80 b3 00 81 80 81 40 71 4f 01 01  .PT........@qO..
><3>01 01 01 01 01 01 7c 2e 90 a0 60 1a 1e 40 30 20  ......|...`..@0 
><3>36 00 da 28 11 00 00 1a 00 00 00 fd 00 38 4b 1e  6..(.........8K.
><3>51 0e 00 0a 20 20 20 20 20 20 00 00 00 fc 00 53  Q...      .....S
><3>79 6e 63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff  yncMaster.  ....
><3>00 48 56 42 51 36 30 39 34 38 37 0a 20 20 00 96  .HVBQ609487.  ..
>
>nouveau 0000:01:00.0: VGA-1: EDID invalid.
>[drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
>[drm] nouveau 0000:01:00.0: Allocating FIFO number 1
>[drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 1)
>[drm] nouveau 0000:01:00.0: Calling LVDS script 6:
>[drm] nouveau 0000:01:00.0: 0xD202: Parsing digital output script table
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
>[drm] nouveau 0000:01:00.0: vpll: n 21 m 4 log2p 1
>[drm] LVDS-8: set mode 1280x800 11
>[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
>[drm] nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 1
>[drm] nouveau 0000:01:00.0: Calling LVDS script 2:
>[drm] nouveau 0000:01:00.0: 0xD262: Parsing digital output script table
>[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 1)
>[drm] nouveau 0000:01:00.0: Calling LVDS script 5:
>[drm] nouveau 0000:01:00.0: 0xD1DE: Parsing digital output script table
>[drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 0 using output A
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 1)
>[drm] nouveau 0000:01:00.0: Calling LVDS script 6:
>[drm] nouveau 0000:01:00.0: 0xD202: Parsing digital output script table
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
>[drm] nouveau 0000:01:00.0: vpll: n 22 m 5 log2p 0
>[drm] DAC-7: set mode 1680x1050 2d
>[drm] nouveau 0000:01:00.0: nv04_dac_mode_set called for encoder 0
>[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
>[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
>[drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
>[drm] nouveau 0000:01:00.0: vpll: n 21 m 4 log2p 1
>[drm] LVDS-8: set mode 1280x800 2e
>[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 1
>[drm] nouveau 0000:01:00.0: nv04_dfp_commit called for encoder 1
>[drm] nouveau 0000:01:00.0: Calling LVDS script 6:
>[drm] nouveau 0000:01:00.0: 0xD202: Parsing digital output script table
>[drm] nouveau 0000:01:00.0: Calling LVDS script 2:
>[drm] nouveau 0000:01:00.0: 0xD262: Parsing digital output script table
>[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 1)
>[drm] nouveau 0000:01:00.0: Calling LVDS script 5:
>[drm] nouveau 0000:01:00.0: 0xD1DE: Parsing digital output script table
>[drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 1 using output A
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0

Actions: View

Attachments on bug 25393: 31654 | 31655 | 31656 | 39099

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.