[ 0.147974] pci 0000:00:1f.2: reg 0x10: [io 0x1c00-0x1c07] [ 0.147986] pci 0000:00:1f.2: reg 0x14: [io 0x18d4-0x18d7] [ 0.147998] pci 0000:00:1f.2: reg 0x18: [io 0x18d8-0x18df] [ 0.148011] pci 0000:00:1f.2: reg 0x1c: [io 0x18d0-0x18d3] [ 0.148023] pci 0000:00:1f.2: reg 0x20: [io 0x18e0-0x18ff] [ 0.148036] pci 0000:00:1f.2: reg 0x24: [mem 0xf0604000-0xf06047ff] [ 0.148102] pci 0000:00:1f.2: PME# supported from D3hot [ 0.148202] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500 [ 0.148220] pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff] [ 0.148261] pci 0000:00:1f.3: reg 0x20: [io 0x1c20-0x1c3f] [ 0.148469] acpiphp: Slot [1] registered [ 0.148475] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.148481] pci 0000:00:1c.0: bridge window [io 0x0000-0x0fff] [ 0.148486] pci 0000:00:1c.0: bridge window [mem 0x00000000-0x000fffff] [ 0.148494] pci 0000:00:1c.0: bridge window [mem 0x00000000-0x000fffff 64bit pref] [ 0.148574] pci 0000:00:1c.3: PCI bridge to [bus 06] [ 0.148579] pci 0000:00:1c.3: bridge window [io 0x0000-0x0fff] [ 0.148585] pci 0000:00:1c.3: bridge window [mem 0x00000000-0x000fffff] [ 0.148593] pci 0000:00:1c.3: bridge window [mem 0x00000000-0x000fffff 64bit pref] [ 0.148716] pci 0000:08:00.0: [8086:4229] type 00 class 0x028000 [ 0.148759] pci 0000:08:00.0: reg 0x10: [mem 0xf0200000-0xf0201fff 64bit] [ 0.148977] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.149035] pci 0000:08:00.0: System wakeup disabled by ACPI [ 0.156024] pci 0000:00:1c.5: PCI bridge to [bus 08] [ 0.156030] pci 0000:00:1c.5: bridge window [io 0x0000-0x0fff] [ 0.156035] pci 0000:00:1c.5: bridge window [mem 0x00000000-0x000fffff] [ 0.156043] pci 0000:00:1c.5: bridge window [mem 0x00000000-0x000fffff 64bit pref] [ 0.156128] pci 0000:0a:01.0: [1217:00f7] type 00 class 0x0c0010 [ 0.156151] pci 0000:0a:01.0: reg 0x10: [mem 0xf0301000-0xf0301fff] [ 0.156163] pci 0000:0a:01.0: reg 0x14: [mem 0xf0300000-0xf03007ff] [ 0.156249] pci 0000:0a:01.0: supports D1 D2 [ 0.156251] pci 0000:0a:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.156328] pci 0000:0a:01.2: [1217:7120] type 00 class 0x080501 [ 0.156354] pci 0000:0a:01.2: reg 0x10: [mem 0xf0300800-0xf03008ff] [ 0.156471] pci 0000:0a:01.2: supports D1 D2 [ 0.156473] pci 0000:0a:01.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.156548] pci 0000:0a:01.3: [1217:7130] type 00 class 0x018000 [ 0.156575] pci 0000:0a:01.3: reg 0x10: [mem 0xf0302000-0xf0302fff] [ 0.156692] pci 0000:0a:01.3: supports D1 D2 [ 0.156694] pci 0000:0a:01.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.156819] pci 0000:00:1e.0: PCI bridge to [bus 0a] (subtractive decode) [ 0.156827] pci 0000:00:1e.0: bridge window [mem 0xf0300000-0xf03fffff] [ 0.156835] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.156837] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.156839] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.156841] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) [ 0.156844] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.156846] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.156848] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode) [ 0.156850] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) [ 0.156882] pci_bus 0000:00: on NUMA node 0 [ 0.157008] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.157071] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.157132] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 0.157192] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15) [ 0.157251] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.157312] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15) [ 0.157372] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 0.157432] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.157531] ACPI: Enabled 8 GPEs in block 00 to 1F [ 0.157531] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 [ 0.157531] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.157531] vgaarb: loaded [ 0.157531] vgaarb: bridge control possible 0000:00:02.0 [ 0.157531] SCSI subsystem initialized [ 0.157531] libata version 3.00 loaded. [ 0.157531] ACPI: bus type USB registered [ 0.157531] usbcore: registered new interface driver usbfs [ 0.157531] usbcore: registered new interface driver hub [ 0.157531] usbcore: registered new device driver usb [ 0.157531] PCI: Using ACPI for IRQ routing [ 0.169678] PCI: pci_cache_line_size set to 64 bytes [ 0.169699] pci 0000:08:00.0: can't claim BAR 0 [mem 0xf0200000-0xf0201fff 64bit]: no compatible bridge window [ 0.169760] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.169762] e820: reserve RAM buffer [mem 0xbf6d0000-0xbfffffff] [ 0.169882] NetLabel: Initializing [ 0.169883] NetLabel: domain hash size = 128 [ 0.169885] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.169897] NetLabel: unlabeled traffic allowed by default [ 0.169913] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.169913] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.169913] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.172018] Switched to clocksource hpet [ 0.181452] AppArmor: AppArmor Filesystem Enabled [ 0.181499] pnp: PnP ACPI init [ 0.181522] ACPI: bus type PNP registered [ 0.181811] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.181814] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved [ 0.181821] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.181823] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.181826] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.181829] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.181831] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.181834] system 00:00: [mem 0x0ff80000-0x0ff8ffff] could not be reserved [ 0.181838] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.182076] pnp 00:01: [dma 4] [ 0.182118] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.182235] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.182239] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.182297] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.182373] system 00:04: [io 0x0800-0x080f] has been reserved [ 0.182376] system 00:04: [io 0x1000-0x107f] could not be reserved [ 0.182378] system 00:04: [io 0x1180-0x11bf] has been reserved [ 0.182381] system 00:04: [io 0xfe00] has been reserved [ 0.182384] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.182431] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.183069] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.183117] pnp 00:07: Plug and Play ACPI device, IDs SYN1021 SYN1000 SYN0002 PNP0f13 (active) [ 0.183173] pnp: PnP ACPI: found 8 devices [ 0.183175] ACPI: bus type PNP unregistered [ 0.183178] PnPBIOS: Disabled by ACPI PNP [ 0.220632] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.220637] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 [ 0.220640] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 [ 0.220656] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000 [ 0.220659] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 [ 0.220661] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 200000 [ 0.220677] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000 [ 0.220680] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000 [ 0.220683] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x001fffff] to [bus 08] add_size 200000 [ 0.220698] pci 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment [ 0.220705] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.220708] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.220710] pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.220713] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.220715] pci 0000:00:1c.5: res[14]=[mem 0x00100000-0x001fffff] get_res_add_size add_size 200000 [ 0.220718] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.220720] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.220722] pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.220725] pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.220733] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff] [ 0.220740] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref] [ 0.220744] pci 0000:00:1c.3: BAR 14: assigned [mem 0xc0400000-0xc05fffff] [ 0.220750] pci 0000:00:1c.3: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref] [ 0.220754] pci 0000:00:1c.5: BAR 14: assigned [mem 0xc0800000-0xc0afffff] [ 0.220760] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0b00000-0xc0cfffff 64bit pref] [ 0.220764] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.220768] pci 0000:00:1c.3: BAR 13: assigned [io 0x3000-0x3fff] [ 0.220771] pci 0000:00:1c.5: BAR 13: assigned [io 0x4000-0x4fff] [ 0.220775] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0d00000-0xc0d000ff] [ 0.220782] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.220786] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.220793] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff] [ 0.220798] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref] [ 0.220806] pci 0000:00:1c.3: PCI bridge to [bus 06] [ 0.220809] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff] [ 0.220815] pci 0000:00:1c.3: bridge window [mem 0xc0400000-0xc05fffff] [ 0.220821] pci 0000:00:1c.3: bridge window [mem 0xc0600000-0xc07fffff 64bit pref] [ 0.220830] pci 0000:08:00.0: BAR 0: assigned [mem 0xc0800000-0xc0801fff 64bit] [ 0.220852] pci 0000:00:1c.5: PCI bridge to [bus 08] [ 0.220855] pci 0000:00:1c.5: bridge window [io 0x4000-0x4fff] [ 0.220862] pci 0000:00:1c.5: bridge window [mem 0xc0800000-0xc0afffff] [ 0.220867] pci 0000:00:1c.5: bridge window [mem 0xc0b00000-0xc0cfffff 64bit pref] [ 0.220875] pci 0000:00:1e.0: PCI bridge to [bus 0a] [ 0.220882] pci 0000:00:1e.0: bridge window [mem 0xf0300000-0xf03fffff] [ 0.220893] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.220895] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.220897] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.220899] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff] [ 0.220901] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff] [ 0.220903] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff] [ 0.220905] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xdfffffff] [ 0.220907] pci_bus 0000:00: resource 11 [mem 0xf0000000-0xfebfffff] [ 0.220910] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.220912] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff] [ 0.220914] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref] [ 0.220916] pci_bus 0000:06: resource 0 [io 0x3000-0x3fff] [ 0.220918] pci_bus 0000:06: resource 1 [mem 0xc0400000-0xc05fffff] [ 0.220921] pci_bus 0000:06: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref] [ 0.220923] pci_bus 0000:08: resource 0 [io 0x4000-0x4fff] [ 0.220925] pci_bus 0000:08: resource 1 [mem 0xc0800000-0xc0afffff] [ 0.220927] pci_bus 0000:08: resource 2 [mem 0xc0b00000-0xc0cfffff 64bit pref] [ 0.220929] pci_bus 0000:0a: resource 1 [mem 0xf0300000-0xf03fffff] [ 0.220932] pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7] [ 0.220934] pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff] [ 0.220936] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff] [ 0.220938] pci_bus 0000:0a: resource 7 [mem 0x000d0000-0x000d3fff] [ 0.220940] pci_bus 0000:0a: resource 8 [mem 0x000d4000-0x000d7fff] [ 0.220942] pci_bus 0000:0a: resource 9 [mem 0x000d8000-0x000dbfff] [ 0.220944] pci_bus 0000:0a: resource 10 [mem 0xc0000000-0xdfffffff] [ 0.220946] pci_bus 0000:0a: resource 11 [mem 0xf0000000-0xfebfffff] [ 0.220977] NET: Registered protocol family 2 [ 0.221144] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.221163] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.221195] TCP: Hash tables configured (established 8192 bind 8192) [ 0.221230] TCP: reno registered [ 0.221233] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.221243] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.221292] NET: Registered protocol family 1 [ 0.221309] pci 0000:00:02.0: Boot video device [ 0.223035] PCI: CLS 64 bytes, default 64 [ 0.223083] Trying to unpack rootfs image as initramfs... [ 0.733303] Freeing initrd memory: 24332K (f506a000 - f682d000) [ 0.733454] Simple Boot Flag at 0x36 set to 0x1 [ 0.733625] Scanning for low memory corruption every 60 seconds [ 0.733959] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.733985] Initialise system trusted keyring [ 0.734008] audit: initializing netlink subsys (disabled) [ 0.734033] audit: type=2000 audit(1402342842.732:1): initialized [ 0.756533] bounce pool size: 64 pages [ 0.756545] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.758711] zbud: loaded [ 0.758780] VFS: Disk quotas dquot_6.5.2 [ 0.758833] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.759485] fuse init (API version 7.23) [ 0.759600] msgmni has been set to 1657 [ 0.760100] Key type asymmetric registered [ 0.760102] Asymmetric key parser 'x509' registered [ 0.760117] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.760154] io scheduler noop registered [ 0.760156] io scheduler deadline registered (default) [ 0.760200] io scheduler cfq registered [ 0.760295] pcieport 0000:00:1c.0: enabling device (0000 -> 0003) [ 0.760480] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.760578] pcieport 0000:00:1c.3: enabling device (0000 -> 0003) [ 0.760715] pcieport 0000:00:1c.3: irq 41 for MSI/MSI-X [ 0.760811] pcieport 0000:00:1c.5: enabling device (0000 -> 0003) [ 0.760950] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X [ 0.761076] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.761097] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.761190] intel_idle: does not run on family 6 model 23 [ 0.762165] ACPI: AC Adapter [ACAD] (off-line) [ 0.762285] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.762711] ACPI: Lid Switch [LID] [ 0.762769] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.762773] ACPI: Power Button [PWRB] [ 0.762840] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.762842] ACPI: Power Button [PWRF] [ 0.764328] Monitor-Mwait will be used to enter C-1 state [ 0.764333] Monitor-Mwait will be used to enter C-2 state [ 0.764337] Monitor-Mwait will be used to enter C-3 state [ 0.764341] tsc: Marking TSC unstable due to TSC halts in idle [ 0.764351] ACPI: acpi_idle registered with cpuidle [ 0.768970] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.768975] ACPI: Thermal Zone [THRM] (54 C) [ 0.769030] GHES: HEST is not enabled! [ 0.769048] isapnp: Scanning for PnP cards... [ 0.769053] ACPI: Battery Slot [BAT1] (battery absent) [ 1.123120] isapnp: No Plug & Play device found [ 1.123251] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.125916] Linux agpgart interface v0.103 [ 1.126012] agpgart-intel 0000:00:00.0: Intel 965GM Chipset [ 1.126056] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [ 1.126830] agpgart-intel 0000:00:00.0: detected 8192K stolen memory [ 1.126984] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 1.129108] brd: module loaded [ 1.130110] loop: module loaded [ 1.130260] ata_piix 0000:00:1f.1: version 2.13 [ 1.131219] scsi0 : ata_piix [ 1.131364] scsi1 : ata_piix [ 1.131430] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 [ 1.131432] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 [ 1.131873] libphy: Fixed MDIO Bus: probed [ 1.132036] tun: Universal TUN/TAP device driver, 1.6 [ 1.132038] tun: (C) 1999-2004 Max Krasnyansky [ 1.132072] ata2: port disabled--ignoring [ 1.132099] PPP generic driver version 2.4.2 [ 1.132174] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.132179] ehci-pci: EHCI PCI platform driver [ 1.132336] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 1.132343] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.132358] ehci-pci 0000:00:1a.7: debug port 1 [ 1.136265] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 1.136283] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf0604800 [ 1.148046] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.148128] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.148133] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.148138] usb usb1: Product: EHCI Host Controller [ 1.148142] usb usb1: Manufacturer: Linux 3.15.0-rc8-intelfix ehci_hcd [ 1.148146] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.148359] hub 1-0:1.0: USB hub found [ 1.148367] hub 1-0:1.0: 4 ports detected [ 1.148689] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.148695] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.148708] ehci-pci 0000:00:1d.7: debug port 1 [ 1.152621] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 1.152638] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf0604c00 [ 1.164040] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.164113] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.164118] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.164122] usb usb2: Product: EHCI Host Controller [ 1.164126] usb usb2: Manufacturer: Linux 3.15.0-rc8-intelfix ehci_hcd [ 1.164130] usb usb2: SerialNumber: 0000:00:1d.7 [ 1.164325] hub 2-0:1.0: USB hub found [ 1.164332] hub 2-0:1.0: 6 ports detected [ 1.164604] ehci-platform: EHCI generic platform driver [ 1.164616] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.164624] ohci-pci: OHCI PCI platform driver [ 1.164638] ohci-platform: OHCI generic platform driver [ 1.164647] uhci_hcd: USB Universal Host Controller Interface driver [ 1.164789] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.164794] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.164802] uhci_hcd 0000:00:1a.0: detected 2 ports [ 1.164834] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820 [ 1.164884] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.164887] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.164889] usb usb3: Product: UHCI Host Controller [ 1.164891] usb usb3: Manufacturer: Linux 3.15.0-rc8-intelfix uhci_hcd [ 1.164893] usb usb3: SerialNumber: 0000:00:1a.0 [ 1.165055] hub 3-0:1.0: USB hub found [ 1.165063] hub 3-0:1.0: 2 ports detected [ 1.165310] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.165315] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.165323] uhci_hcd 0000:00:1a.1: detected 2 ports [ 1.165353] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840 [ 1.165401] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.165403] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.165406] usb usb4: Product: UHCI Host Controller [ 1.165408] usb usb4: Manufacturer: Linux 3.15.0-rc8-intelfix uhci_hcd [ 1.165409] usb usb4: SerialNumber: 0000:00:1a.1 [ 1.165575] hub 4-0:1.0: USB hub found [ 1.165582] hub 4-0:1.0: 2 ports detected [ 1.165826] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.165832] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 1.165840] uhci_hcd 0000:00:1d.0: detected 2 ports [ 1.165861] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860 [ 1.165913] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.165915] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.165917] usb usb5: Product: UHCI Host Controller [ 1.165919] usb usb5: Manufacturer: Linux 3.15.0-rc8-intelfix uhci_hcd [ 1.165921] usb usb5: SerialNumber: 0000:00:1d.0 [ 1.166079] hub 5-0:1.0: USB hub found [ 1.166086] hub 5-0:1.0: 2 ports detected [ 1.166325] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.166331] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 1.166339] uhci_hcd 0000:00:1d.1: detected 2 ports [ 1.166373] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880 [ 1.166421] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.166423] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.166425] usb usb6: Product: UHCI Host Controller [ 1.166427] usb usb6: Manufacturer: Linux 3.15.0-rc8-intelfix uhci_hcd [ 1.166429] usb usb6: SerialNumber: 0000:00:1d.1 [ 1.166586] hub 6-0:1.0: USB hub found [ 1.166593] hub 6-0:1.0: 2 ports detected [ 1.166833] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.166838] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 1.166848] uhci_hcd 0000:00:1d.2: detected 2 ports [ 1.166869] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0 [ 1.166916] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.166919] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.166921] usb usb7: Product: UHCI Host Controller [ 1.166923] usb usb7: Manufacturer: Linux 3.15.0-rc8-intelfix uhci_hcd [ 1.166925] usb usb7: SerialNumber: 0000:00:1d.2 [ 1.167059] hub 7-0:1.0: USB hub found [ 1.167067] hub 7-0:1.0: 2 ports detected [ 1.167261] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.169521] i8042: Detected active multiplexing controller, rev 1.1 [ 1.173231] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.173236] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.173274] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.173305] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.173343] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.173538] mousedev: PS/2 mouse device common for all mice [ 1.173855] rtc_cmos 00:05: RTC can wake from S4 [ 1.174025] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.174057] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.174112] device-mapper: uevent: version 1.0.3 [ 1.174199] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 1.174226] platform eisa.0: Probing EISA bus 0 [ 1.174229] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 1.174231] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 1.174234] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 1.174236] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 1.174238] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 1.174240] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 1.174242] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 1.174244] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 1.174246] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 1.174248] platform eisa.0: EISA: Detected 0 cards [ 1.174255] cpufreq-nforce2: No nForce2 chipset. [ 1.174261] ledtrig-cpu: registered to indicate activity on CPUs [ 1.174328] TCP: cubic registered [ 1.174466] NET: Registered protocol family 10 [ 1.174703] NET: Registered protocol family 17 [ 1.174717] Key type dns_resolver registered [ 1.174950] Using IPI No-Shortcut mode [ 1.175097] Loading compiled-in X.509 certificates [ 1.178576] Loaded X.509 cert 'Magrathea: Glacier signing key: b9b026238409cc295a7308d5388dda039b2d1930' [ 1.178589] registered taskstats version 1 [ 1.180908] Key type trusted registered [ 1.182787] Key type encrypted registered [ 1.184702] AppArmor: AppArmor sha1 policy hashing enabled [ 1.185102] Magic number: 2:823:697 [ 1.185202] rtc_cmos 00:05: setting system clock to 2014-06-09 19:40:43 UTC (1402342843) [ 1.185711] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.185713] EDD information not available. [ 1.185785] PM: Hibernation image not present or could not be loaded. [ 1.208504] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.292605] ata1.00: ATAPI: MATSHITADVD-RAM UJ-852S, 1.80, max UDMA/33 [ 1.308503] ata1.00: configured for UDMA/33 [ 1.311264] scsi 0:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-852S 1.80 PQ: 0 ANSI: 5 [ 1.326124] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.326129] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.326348] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.326491] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.327044] Freeing unused kernel memory: 888K (c19ee000 - c1acc000) [ 1.327094] Write protecting the kernel text: 6624k [ 1.327185] Write protecting the kernel read-only data: 2884k [ 1.327186] NX-protecting the kernel data: 5664k [ 1.341861] systemd-udevd[105]: starting version 204 [ 1.361430] drm: module verification failed: signature and/or required key missing - tainting kernel [ 1.362639] [drm] Initialized drm 1.1.0 20060810 [ 1.368153] wmi: Mapper loaded [ 1.371183] [drm:i915_dump_device_info] i915 device info: gen=4, pciid=0x2a02 flags=is_mobile,is_crestline,has_fbc,has_hotplug,has_overlay,supports_tv, [ 1.371236] [drm:intel_detect_pch] No PCH found. [ 1.371239] [drm] Memory usable by graphics device = 512M [ 1.371241] [drm:i915_gem_gtt_init] GMADR size = 256M [ 1.371243] [drm:i915_gem_gtt_init] GTT stolen size = 8M [ 1.371244] [drm:i915_gem_gtt_init] ppgtt mode: 0 [ 1.371552] [drm:intel_opregion_setup] graphic opregion physical addr: 0xbf6e0b0d [ 1.371561] [drm:intel_opregion_setup] Public ACPI methods supported [ 1.371562] [drm:intel_opregion_setup] SWSCI supported [ 1.379097] sdhci: Secure Digital Host Controller Interface driver [ 1.379100] sdhci: Copyright(c) Pierre Ossman [ 1.379374] sdhci-pci 0000:0a:01.2: SDHCI controller found [1217:7120] (rev 2) [ 1.379485] mmc0: no vqmmc regulator found [ 1.379487] mmc0: no vmmc regulator found [ 1.379578] mmc0: SDHCI controller on PCI [0000:0a:01.2] using DMA [ 1.406632] [drm:swsci_setup] SWSCI GBDA callbacks 000004f3, SBCB callbacks 00000241 [ 1.406636] [drm:intel_opregion_setup] ASLE supported [ 1.406688] i915 0000:00:02.0: irq 43 for MSI/MSI-X [ 1.406698] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.406699] [drm] Driver supports precise vblank timestamp query. [ 1.406702] [drm:init_vbt_defaults] Set default to SSC at 100000 kHz [ 1.406705] [drm:intel_parse_bios] Using VBT from OpRegion: $VBT CRESTLINE d [ 1.406708] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 96000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 1.406710] [drm:parse_general_definitions] crt_ddc_bus_pin: 2 [ 1.406714] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [ 1.406717] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x800" 0 71000 1280 1328 1360 1440 800 803 809 823 0x8 0xa [ 1.406720] [drm:parse_lfp_panel_data] VBT initial LVDS value 42300300 [ 1.406722] [drm:parse_lfp_backlight] PWM backlight not present in VBT (type 0) [ 1.406724] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables: [ 1.406727] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 1.406729] [drm:parse_sdvo_device_mapping] the SDVO device with slave addr 70 is found on SDVOB port [ 1.406731] [drm:parse_sdvo_device_mapping] SDVO device: dvo=1, addr=70, wiring=1, ddc_pin=29, i2c_pin=5 [ 1.406734] [drm:parse_mipi] No MIPI BDB found [ 1.406749] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 1.406760] [drm:i915_gem_init_stolen] found 8388608 bytes of stolen memory at bf800000 [ 1.406763] [drm:intel_display_power_get] enabling always-on [ 1.406797] [drm:intel_modeset_init] 2 display pipes available. [ 1.406803] [drm:intel_modeset_init] pipe A sprite A init failed: -19 [ 1.406808] [drm:intel_modeset_init] pipe B sprite B init failed: -19 [ 1.406812] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.436289] firewire_ohci 0000:0a:01.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x10 [ 1.488237] [drm:intel_lvds_init] using preferred mode from EDID: [ 1.488245] [drm:drm_mode_debug_printmodeline] Modeline 11:"1280x800" 60 71000 1280 1328 1360 1440 800 803 809 823 0x48 0xa [ 1.488252] [drm:intel_lvds_init] detected single-link lvds configuration [ 1.488334] [drm:intel_panel_setup_backlight] native backlight control not available per VBT [ 1.488406] [drm:intel_setup_outputs] probing SDVOB [ 1.488410] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 1.546394] [drm:intel_sdvo_debug_write] SDVOB: W: 02 (SDVO_CMD_GET_DEVICE_CAPS) [ 1.556099] [drm:intel_sdvo_read_response] SDVOB: R: (Success) 04 AE 00 02 01 01 01 00 [ 1.556102] [drm:intel_sdvo_get_capabilities] SDVO capabilities: [ 1.556102] vendor_id: 4 [ 1.556102] device_id: 174 [ 1.556102] device_rev_id: 0 [ 1.556102] sdvo_version_major: 2 [ 1.556102] sdvo_version_minor: 1 [ 1.556102] sdvo_inputs_mask: 1 [ 1.556102] smooth_scaling: 0 [ 1.556102] sharp_scaling: 0 [ 1.556102] up_scaling: 0 [ 1.556102] down_scaling: 0 [ 1.556102] stall_support: 0 [ 1.556102] output_flags: 1 [ 1.556109] [drm:intel_sdvo_dvi_init] initialising DVI device 0 [ 1.556112] [drm:intel_sdvo_debug_write] SDVOB: W: 0C (SDVO_CMD_GET_HOT_PLUG_SUPPORT) [ 1.560375] [drm:intel_sdvo_read_response] SDVOB: R: (Success) 01 00 [ 1.560377] [drm:intel_sdvo_debug_write] SDVOB: W: 0D 01 00 (SDVO_CMD_SET_ACTIVE_HOT_PLUG) [ 1.563215] [drm:intel_sdvo_debug_write] SDVOB: W: 9D (SDVO_CMD_GET_SUPP_ENCODE) [ 1.567459] [drm:intel_sdvo_read_response] SDVOB: R: (Success) 10 12 [ 1.567511] [drm:intel_sdvo_debug_write] SDVOB: W: 10 00 (SDVO_CMD_SET_TARGET_INPUT) [ 1.570602] [drm:intel_sdvo_read_response] SDVOB: R: (Success) [ 1.570604] [drm:intel_sdvo_debug_write] SDVOB: W: 1D (SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE) [ 1.576636] [drm:intel_sdvo_read_response] SDVOB: R: (Success) C4 09 74 40 [ 1.576639] [drm:intel_sdvo_init] SDVOB device VID/DID: 04:AE.00, clock range 25MHz - 165MHz, input 1: Y, input 2: N, output 1: Y, output 2: N [ 1.576641] [drm:intel_setup_outputs] probing SDVOC [ 1.576643] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 2 [ 1.576963] [drm:intel_sdvo_read_byte] i2c transfer returned -6 [ 1.576965] [drm:intel_sdvo_init] No SDVO device found on SDVOC [ 1.576991] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 1 [ 1.576994] [drm:intel_tv_init] Integrated TV is not present. [ 1.577019] [drm:intel_modeset_readout_hw_state] [CRTC:5] hw state readout: enabled [ 1.577021] [drm:intel_modeset_readout_hw_state] [CRTC:7] hw state readout: disabled [ 1.577025] [drm:intel_modeset_readout_hw_state] [ENCODER:9:LVDS-9] hw state readout: enabled, pipe A [ 1.577028] [drm:intel_modeset_readout_hw_state] [ENCODER:15:DAC-15] hw state readout: enabled, pipe A [ 1.577031] [drm:intel_sdvo_debug_write] SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS) [ 1.581273] [drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00 [ 1.581276] [drm:intel_modeset_readout_hw_state] [ENCODER:16:TMDS-16] hw state readout: disabled, pipe A [ 1.581278] [drm:intel_modeset_readout_hw_state] [CONNECTOR:8:LVDS-1] hw state readout: enabled [ 1.581280] [drm:intel_modeset_readout_hw_state] [CONNECTOR:14:VGA-1] hw state readout: enabled [ 1.581283] [drm:intel_sdvo_debug_write] SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS) [ 1.585513] [drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00 [ 1.585515] [drm:intel_modeset_readout_hw_state] [CONNECTOR:17:HDMI-A-1] hw state readout: disabled [ 1.585519] [drm:intel_dump_pipe_config] [CRTC:5][setup_hw_state] config for pipe A [ 1.585520] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 1.585522] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 1.585524] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.585525] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.585527] [drm:intel_dump_pipe_config] requested mode: [ 1.585529] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 1024 0 0 0 768 0 0 0 0x0 0x0 [ 1.585531] [drm:intel_dump_pipe_config] adjusted mode: [ 1.585533] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa [ 1.585535] [drm:intel_dump_crtc_timings] crtc timings: 70857 1280 1328 1360 1440 800 803 809 823, type: 0x0 flags: 0xa [ 1.585537] [drm:intel_dump_pipe_config] port clock: 70857 [ 1.585538] [drm:intel_dump_pipe_config] pipe src size: 1024x768 [ 1.585540] [drm:intel_dump_pipe_config] gmch pfit: control: 0x80000000, ratios: 0x0f5c0ccd, lvds border: 0x00008000 [ 1.585542] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.585543] [drm:intel_dump_pipe_config] ips: 0 [ 1.585545] [drm:intel_dump_pipe_config] double wide: 0 [ 1.585547] [drm:intel_dump_pipe_config] [CRTC:7][setup_hw_state] config for pipe B [ 1.585548] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 1.585549] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 1.585551] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.585553] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.585554] [drm:intel_dump_pipe_config] requested mode: [ 1.585557] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.585558] [drm:intel_dump_pipe_config] adjusted mode: [ 1.585560] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.585562] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.585564] [drm:intel_dump_pipe_config] port clock: 0 [ 1.585565] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 1.585567] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.585568] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.585570] [drm:intel_dump_pipe_config] ips: 0 [ 1.585571] [drm:intel_dump_pipe_config] double wide: 0 [ 1.585574] [drm:intel_connector_check_state] [CONNECTOR:8:LVDS-1] [ 1.585576] [drm:intel_connector_check_state] [CONNECTOR:14:VGA-1] [ 1.585579] [drm:intel_sdvo_debug_write] SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS) [ 1.589815] [drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00 [ 1.589817] [drm:check_encoder_state] [ENCODER:9:LVDS-9] [ 1.589819] [drm:check_encoder_state] [ENCODER:15:DAC-15] [ 1.589821] [drm:check_encoder_state] [ENCODER:16:TMDS-16] [ 1.589824] [drm:intel_sdvo_debug_write] SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS) [ 1.594057] [drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00 [ 1.594059] [drm:check_crtc_state] [CRTC:5] [ 1.594066] [drm:check_crtc_state] [CRTC:7] [ 1.594071] [drm:i9xx_get_plane_config] pipe/plane 0/0 with fb: size=1024x768@32, offset=0, pitch 4096, size 0x300000 [ 1.594074] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=300000 [ 1.594077] [drm:i915_pages_create_for_stolen] offset=0x0, size=3145728 [ 1.594081] [drm:intel_alloc_plane_obj] plane fb obj f6265100 [ 1.594083] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 300000 [ 1.594085] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [300000, 1ffff000] [ 1.594865] [drm:i915_gem_context_init] fake context support initialized [ 1.594872] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000 [ 1.594874] [drm:i915_pages_create_for_stolen] offset=0x300000, size=131072 [ 1.594911] [drm:i915_gem_object_create_stolen] creating stolen object: size=1000 [ 1.594913] [drm:i915_pages_create_for_stolen] offset=0x320000, size=4096 [ 1.594921] [drm] initialized overlay support [ 1.594930] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] [ 1.594932] [drm:intel_lvds_detect] [CONNECTOR:8:LVDS-1] [ 1.594938] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] probed modes : [ 1.594942] [drm:drm_mode_debug_printmodeline] Modeline 11:"1280x800" 60 71000 1280 1328 1360 1440 800 803 809 823 0x48 0xa [ 1.594944] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] [ 1.594946] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=1 [ 1.608225] [drm:intel_crt_detect] CRT not detected via hotplug [ 1.612220] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 1.612224] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 1.612227] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 1.612231] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 1.612503] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 1.612505] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 1.612506] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 1.612508] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] disconnected [ 1.612510] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:17:HDMI-A-1] [ 1.612512] [drm:intel_sdvo_detect] [CONNECTOR:17:HDMI-A-1] [ 1.612515] [drm:intel_sdvo_debug_write] SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS) [ 1.616751] [drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00 [ 1.616752] [drm:intel_sdvo_detect] SDVO response 0 0 [1] [ 1.616754] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:17:HDMI-A-1] disconnected [ 1.616756] [drm:drm_setup_crtcs] [ 1.616758] [drm:drm_enable_connectors] connector 8 enabled? yes [ 1.616759] [drm:drm_enable_connectors] connector 14 enabled? no [ 1.616761] [drm:drm_enable_connectors] connector 17 enabled? no [ 1.616763] [drm:intel_fb_initial_config] looking for cmdline mode on connector 8 [ 1.616765] [drm:intel_fb_initial_config] looking for preferred mode on connector 8 [ 1.616767] [drm:intel_fb_initial_config] connector LVDS-1 on crtc 5: 1280x800 [ 1.616768] [drm:intel_fb_initial_config] connector 14 not enabled, skipping [ 1.616770] [drm:intel_fb_initial_config] connector 17 not enabled, skipping [ 1.616772] [drm:drm_setup_crtcs] desired mode 1280x800 set on crtc 5 [ 1.616774] [drm:intelfb_create] no BIOS fb, allocating a new one [ 1.616775] [drm:i915_gem_object_create_stolen] creating stolen object: size=3e8000 [ 1.616777] [drm:i915_pages_create_for_stolen] offset=0x321000, size=4096000 [ 1.618055] [drm:intelfb_create] allocated 1280x800 fb: 0x00340000, bo f6265300 [ 1.618168] fbcon: inteldrmfb (fb0) is primary device [ 1.618213] [drm:intel_crtc_cursor_set] cursor off [ 1.618215] [drm:intel_crtc_set_config] [CRTC:5] [FB:22] #connectors=1 (x y) (0 0) [ 1.618217] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set [ 1.618219] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.618221] [drm:drm_mode_debug_printmodeline] Modeline 21:"1280x800" 60 71000 1280 1328 1360 1440 800 803 809 823 0x48 0xa [ 1.618222] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=1 [ 1.618224] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:VGA-1] to [NOCRTC] [ 1.618225] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch [ 1.618226] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:5] [ 1.618227] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch [ 1.618228] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 1.618231] [drm:connected_sink_compute_bpp] [CONNECTOR:8:LVDS-1] checking for sink bpp constrains [ 1.618232] [drm:intel_lvds_compute_config] forcing display bpp (was 24) to LVDS (18) [ 1.618235] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1 [ 1.618236] [drm:intel_dump_pipe_config] [CRTC:5][modeset] config for pipe A [ 1.618236] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 1.618237] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 1.618238] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.618240] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.618240] [drm:intel_dump_pipe_config] requested mode: [ 1.618242] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x800" 60 71000 1280 1328 1360 1440 800 803 809 823 0x48 0xa [ 1.618243] [drm:intel_dump_pipe_config] adjusted mode: [ 1.618245] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x800" 60 71000 1280 1328 1360 1440 800 803 809 823 0x48 0xa [ 1.618246] [drm:intel_dump_crtc_timings] crtc timings: 71000 1280 1328 1360 1440 800 803 809 823, type: 0x48 flags: 0xa [ 1.618247] [drm:intel_dump_pipe_config] port clock: 71000 [ 1.618248] [drm:intel_dump_pipe_config] pipe src size: 1280x800 [ 1.618249] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.618250] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.618251] [drm:intel_dump_pipe_config] ips: 0 [ 1.618251] [drm:intel_dump_pipe_config] double wide: 0 [ 1.740260] usb 2-4: new high-speed USB device number 3 using ehci-pci [ 1.848227] [drm:i9xx_pfit_disable] disabling pfit, current: 0x80000000 [ 1.848232] [drm:i965_update_wm] Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 1 [ 1.848235] [drm:intel_update_fbc] no output, disabling [ 1.848240] [drm:i9xx_get_refclk] using SSC reference clock of 96000 kHz [ 1.848405] [drm:i9xx_update_primary_plane] Writing base 00340000 00000000 0 0 5120 [ 1.848408] [drm:intel_crtc_mode_set] [ENCODER:9:LVDS-9] set [MODE:0:1280x800] [ 1.849040] [drm:i965_update_wm] self-refresh entries: 80, wm: 432 [ 1.849041] [drm:i965_update_wm] self-refresh watermark: display plane 432 cursor 32 [ 1.849042] [drm:i965_update_wm] Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 432 [ 1.872017] [drm:intel_update_fbc] disabled per chip default [ 1.889963] usb 2-4: New USB device found, idVendor=04f2, idProduct=b008 [ 1.889966] usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 1.889969] usb 2-4: Product: Chicony USB 2.0 Camera [ 1.889971] usb 2-4: Manufacturer: Chicony Electronics Co., Ltd. [ 1.889974] usb 2-4: SerialNumber: SN0001 [ 1.936243] firewire_core 0000:0a:01.0: created device fw0: GUID 001b240000ea72fa, S400 [ 2.136233] usb 5-2: new full-speed USB device number 2 using uhci_hcd [ 2.152238] [drm:intel_connector_check_state] [CONNECTOR:8:LVDS-1] [ 2.152244] [drm:intel_sdvo_debug_write] SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS) [ 2.156521] [drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00 [ 2.156522] [drm:check_encoder_state] [ENCODER:9:LVDS-9] [ 2.156523] [drm:check_encoder_state] [ENCODER:15:DAC-15] [ 2.156525] [drm:check_encoder_state] [ENCODER:16:TMDS-16] [ 2.156527] [drm:intel_sdvo_debug_write] SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS) [ 2.160793] [drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00 [ 2.160794] [drm:check_crtc_state] [CRTC:5] [ 2.160800] [drm:check_crtc_state] [CRTC:7] [ 2.160801] [drm:intel_crtc_cursor_set] cursor off [ 2.160802] [drm:intel_crtc_set_config] [CRTC:7] [NOFB] [ 2.160804] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0 [ 2.160805] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:5] [ 2.160809] Console: switching to colour frame buffer device 160x50 [ 2.160817] [drm:intel_crtc_set_config] [CRTC:5] [FB:22] #connectors=1 (x y) (0 0) [ 2.160819] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 2.160820] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:5] [ 2.164976] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.164978] i915 0000:00:02.0: registered panic notifier [ 2.197801] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.248962] acpi device:06: registered as cooling_device2 [ 2.277055] acpi device:07: registered as cooling_device3 [ 2.297948] usb 5-2: New USB device found, idVendor=08ff, idProduct=1600 [ 2.297954] usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.297958] usb 5-2: Product: Fingerprint Sensor [ 2.324834] acpi device:08: registered as cooling_device4 [ 2.340828] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.0, id: 0x1e0b1, caps: 0xd04711/0xa00000/0x20000, board id: 3655, fw id: 470335 [ 2.340836] psmouse serio4: synaptics: Toshiba Satellite U400 detected, limiting rate to 40pps. [ 2.385889] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11 [ 2.393096] acpi device:09: registered as cooling_device5 [ 2.405105] acpi device:0a: registered as cooling_device6 [ 2.405202] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input12 [ 2.405274] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 2.405307] ahci 0000:00:1f.2: version 3.0 [ 2.405494] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X [ 2.405556] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 2.405559] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc [ 2.406234] scsi2 : ahci [ 2.406359] scsi3 : ahci [ 2.406478] scsi4 : ahci [ 2.406551] ata3: SATA max UDMA/133 abar m2048@0xf0604000 port 0xf0604100 irq 44 [ 2.406554] ata4: SATA max UDMA/133 abar m2048@0xf0604000 port 0xf0604180 irq 44 [ 2.406557] ata5: SATA max UDMA/133 abar m2048@0xf0604000 port 0xf0604200 irq 44 [ 2.724236] ata4: SATA link down (SStatus 0 SControl 300) [ 2.724269] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.724298] ata5: SATA link down (SStatus 0 SControl 300) [ 2.724860] ata3.00: unexpected _GTF length (8) [ 2.783053] ata3.00: ATA-8: TOSHIBA MK3252GSX, LV010M, max UDMA/100 [ 2.783058] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.783992] ata3.00: unexpected _GTF length (8) [ 2.784240] ata3.00: configured for UDMA/100 [ 2.784487] scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK3252GS LV01 PQ: 0 ANSI: 5 [ 2.784825] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2.784874] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 2.784900] sd 2:0:0:0: [sda] Write Protect is off [ 2.784904] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.784933] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.882787] sda: sda1 sda2 < sda5 sda6 sda7 sda8 > [ 2.883514] sd 2:0:0:0: [sda] Attached SCSI disk [ 3.469751] [drm:intel_crtc_set_config] [CRTC:5] [FB:22] #connectors=1 (x y) (0 0) [ 3.469755] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 3.469757] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:5] [ 3.529028] [drm:i915_gem_open] [ 3.529052] [drm:intel_crtc_cursor_set] cursor off [ 3.529056] [drm:intel_crtc_set_config] [CRTC:5] [FB:22] #connectors=1 (x y) (0 0) [ 3.529060] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 3.529063] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:5] [ 3.529065] [drm:intel_crtc_cursor_set] cursor off [ 3.529067] [drm:intel_crtc_set_config] [CRTC:7] [NOFB] [ 3.529068] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0 [ 3.529070] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:5] [ 3.529079] [drm:i915_gem_open] [ 3.529088] [drm:intel_crtc_cursor_set] cursor off [ 3.529090] [drm:intel_crtc_set_config] [CRTC:5] [FB:22] #connectors=1 (x y) (0 0) [ 3.529092] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 3.529094] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:5] [ 3.529096] [drm:intel_crtc_cursor_set] cursor off [ 3.529097] [drm:intel_crtc_set_config] [CRTC:7] [NOFB] [ 3.529099] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0 [ 3.529101] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:5] [ 3.529108] [drm:i915_gem_open] [ 3.529142] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3] [ 3.529144] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3] [ 3.529148] [drm:drm_mode_getconnector] [CONNECTOR:8:?] [ 3.529151] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] [ 3.529154] [drm:intel_lvds_detect] [CONNECTOR:8:LVDS-1] [ 3.529163] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] probed modes : [ 3.529167] [drm:drm_mode_debug_printmodeline] Modeline 11:"1280x800" 60 71000 1280 1328 1360 1440 800 803 809 823 0x48 0xa [ 3.529169] [drm:drm_mode_getconnector] [CONNECTOR:8:?] [ 3.534296] [drm:drm_mode_getconnector] [CONNECTOR:14:?] [ 3.534303] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] [ 3.534307] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=1 [ 3.548229] [drm:intel_crt_detect] CRT not detected via hotplug [ 3.552224] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 3.552229] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 3.552232] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 3.552236] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 3.552513] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 3.552515] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 3.552516] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 3.552519] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] disconnected [ 3.552525] [drm:drm_mode_getconnector] [CONNECTOR:14:?] [ 3.552527] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] [ 3.552529] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=1 [ 3.560224] [drm:intel_crt_detect] CRT not detected via hotplug [ 3.564221] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 3.564225] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 3.564228] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 3.564232] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 3.564502] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 3.564503] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 3.564504] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 3.564506] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] disconnected [ 3.564513] [drm:drm_mode_getconnector] [CONNECTOR:17:?] [ 3.564516] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:17:HDMI-A-1] [ 3.564518] [drm:intel_sdvo_detect] [CONNECTOR:17:HDMI-A-1] [ 3.564523] [drm:intel_sdvo_debug_write] SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS) [ 3.568763] [drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00 [ 3.568765] [drm:intel_sdvo_detect] SDVO response 0 0 [1] [ 3.568767] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:17:HDMI-A-1] disconnected [ 3.568769] [drm:drm_mode_getconnector] [CONNECTOR:17:?] [ 3.568771] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:17:HDMI-A-1] [ 3.568773] [drm:intel_sdvo_detect] [CONNECTOR:17:HDMI-A-1] [ 3.568775] [drm:intel_sdvo_debug_write] SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS) [ 3.573007] [drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00 [ 3.573009] [drm:intel_sdvo_detect] SDVO response 0 0 [1] [ 3.573011] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:17:HDMI-A-1] disconnected [ 3.573040] [drm:drm_mode_addfb] [FB:23] [ 3.625050] [drm:drm_mode_addfb] [FB:23] [ 3.629121] [drm:drm_mode_setcrtc] [CRTC:5] [ 3.629126] [drm:drm_mode_setcrtc] [CONNECTOR:8:LVDS-1] [ 3.629129] [drm:intel_crtc_set_config] [CRTC:5] [FB:23] #connectors=1 (x y) (0 0) [ 3.629133] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=1 [ 3.629136] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:5] [ 3.633927] [drm:i9xx_update_primary_plane] Writing base 00740000 00000000 0 0 5120 [ 3.651787] [drm:drm_mode_setcrtc] [CRTC:5] [ 3.651797] [drm:drm_mode_setcrtc] [CONNECTOR:8:LVDS-1] [ 3.651800] [drm:intel_crtc_set_config] [CRTC:5] [FB:23] #connectors=1 (x y) (0 0) [ 3.651803] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 3.651806] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:5] [ 3.739952] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null) [ 4.388263] random: nonblocking pool is initialized [ 6.061879] init: ureadahead main process (202) terminated with status 5 [ 7.298284] Adding 4882428k swap on /dev/sda5. Priority:-1 extents:1 across:4882428k FS [ 8.562853] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro [ 8.601644] systemd-udevd[315]: starting version 204 [ 10.116888] lp: driver loaded but no devices found [ 10.169101] ppdev: user-space parallel port driver [ 13.519029] toshiba_bluetooth: Detected Toshiba ACPI Bluetooth device - installing RFKill handler [ 13.519980] toshiba_bluetooth: Re-enabling Toshiba Bluetooth [ 13.558666] ACPI Warning: SystemIO range 0x00001028-0x0000102f conflicts with OpRegion 0x00001000-0x0000107f (\PMIO) (20140214/utaddress-258) [ 13.558674] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.558679] ACPI Warning: SystemIO range 0x000011b0-0x000011bf conflicts with OpRegion 0x00001180-0x000011bb (\GPIO) (20140214/utaddress-258) [ 13.558683] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.558684] ACPI Warning: SystemIO range 0x00001180-0x000011af conflicts with OpRegion 0x00001180-0x000011bb (\GPIO) (20140214/utaddress-258) [ 13.558688] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.558689] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 13.770220] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.20 [ 13.770765] input: Toshiba input device as /devices/virtual/input/input13 [ 13.778315] toshiba_acpi: Accelerometer not supported [ 14.099229] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c [ 14.152074] usb 6-1: new full-speed USB device number 2 using uhci_hcd [ 14.276778] cfg80211: Calling CRDA to update world regulatory domain [ 14.319098] usb 6-1: New USB device found, idVendor=0930, idProduct=0508 [ 14.319105] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 14.372800] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c [ 14.372987] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 14.636765] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree: [ 14.636769] iwl4965: Copyright(c) 2003-2011 Intel Corporation [ 14.636827] iwl4965 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM control [ 14.636934] iwl4965 0000:08:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4 [ 14.675269] iwl4965 0000:08:00.0: device EEPROM VER=0x36, CALIB=0x5 [ 14.675284] iwl4965 0000:08:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels [ 14.675323] iwl4965 0000:08:00.0: irq 45 for MSI/MSI-X [ 14.699995] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X [ 14.786494] iwl4965 0000:08:00.0: loaded firmware version 228.61.2.24 [ 14.805163] sound hdaudioC0D0: CX20561 (Hermosa): BIOS auto-probing. [ 14.805672] sound hdaudioC0D0: autoconfig: line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:speaker [ 14.805675] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 14.805677] sound hdaudioC0D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0) [ 14.805679] sound hdaudioC0D0: mono: mono_out=0x0 [ 14.805681] sound hdaudioC0D0: dig-out=0x1c/0x0 [ 14.805683] sound hdaudioC0D0: inputs: [ 14.805685] sound hdaudioC0D0: Internal Mic=0x1d [ 14.805688] sound hdaudioC0D0: Mic=0x17 [ 14.806419] sound hdaudioC0D0: Enable sync_write for stable communication [ 14.816453] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 14.821545] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 14.821652] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 15.026183] ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs' [ 15.038288] Linux video capture interface: v2.00 [ 15.381379] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008) [ 15.384931] input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input17 [ 15.385427] usbcore: registered new interface driver uvcvideo [ 15.385429] USB Video Class driver (1.1.1) [ 15.933615] Bluetooth: Core ver 2.19 [ 15.933640] NET: Registered protocol family 31 [ 15.933642] Bluetooth: HCI device and connection manager initialized [ 15.933870] Bluetooth: HCI socket layer initialized [ 15.933874] Bluetooth: L2CAP socket layer initialized [ 15.933882] Bluetooth: SCO socket layer initialized [ 16.208783] audit: type=1400 audit(1402306858.520:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=509 comm="apparmor_parser" [ 16.208791] audit: type=1400 audit(1402306858.520:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=509 comm="apparmor_parser" [ 16.208795] audit: type=1400 audit(1402306858.520:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=509 comm="apparmor_parser" [ 16.208805] audit: type=1400 audit(1402306858.520:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=481 comm="apparmor_parser" [ 16.208811] audit: type=1400 audit(1402306858.520:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=481 comm="apparmor_parser" [ 16.208815] audit: type=1400 audit(1402306858.520:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=481 comm="apparmor_parser" [ 16.209255] audit: type=1400 audit(1402306858.520:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=509 comm="apparmor_parser" [ 16.209259] audit: type=1400 audit(1402306858.520:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=509 comm="apparmor_parser" [ 16.209281] audit: type=1400 audit(1402306858.520:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=481 comm="apparmor_parser" [ 16.209285] audit: type=1400 audit(1402306858.520:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=481 comm="apparmor_parser" [ 16.528756] cfg80211: World regulatory domain updated: [ 16.528762] cfg80211: DFS Master region: unset [ 16.528764] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 16.528767] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 16.528769] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 16.528771] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 16.528773] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 16.528775] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 16.580135] usbcore: registered new interface driver btusb [ 17.241733] init: failsafe main process (535) killed by TERM signal [ 18.589359] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 18.589364] Bluetooth: BNEP filters: protocol multicast [ 18.589372] Bluetooth: BNEP socket layer initialized [ 18.649107] Bluetooth: RFCOMM TTY layer initialized [ 18.649119] Bluetooth: RFCOMM socket layer initialized [ 18.649125] Bluetooth: RFCOMM ver 1.11 [ 19.408311] init: cups main process (682) killed by HUP signal [ 19.408325] init: cups main process ended, respawning [ 22.089229] [drm:i915_gem_open] [ 22.089248] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3] [ 22.089251] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3] [ 22.089255] [drm:drm_mode_getconnector] [CONNECTOR:8:?] [ 22.089259] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] [ 22.089261] [drm:intel_lvds_detect] [CONNECTOR:8:LVDS-1] [ 22.089272] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] probed modes : [ 22.089275] [drm:drm_mode_debug_printmodeline] Modeline 11:"1280x800" 60 71000 1280 1328 1360 1440 800 803 809 823 0x48 0xa [ 22.089278] [drm:drm_mode_getconnector] [CONNECTOR:8:?] [ 22.089285] [drm:drm_mode_getconnector] [CONNECTOR:14:?] [ 22.089287] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] [ 22.089290] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=1 [ 22.096029] [drm:intel_crt_detect] CRT not detected via hotplug [ 22.100088] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 22.100091] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 22.100093] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 22.100095] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 22.100396] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 22.100398] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 22.100400] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 22.100402] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] disconnected [ 22.100407] [drm:drm_mode_getconnector] [CONNECTOR:14:?] [ 22.100409] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] [ 22.100411] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=1 [ 22.108029] [drm:intel_crt_detect] CRT not detected via hotplug [ 22.112132] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 22.112137] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 22.112139] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 22.112141] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 22.112440] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 22.112442] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 22.112444] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 22.112447] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] disconnected [ 22.112460] [drm:drm_mode_getconnector] [CONNECTOR:17:?] [ 22.112463] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:17:HDMI-A-1] [ 22.112466] [drm:intel_sdvo_detect] [CONNECTOR:17:HDMI-A-1] [ 22.112470] [drm:intel_sdvo_debug_write] SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS) [ 22.117455] [drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00 [ 22.117457] [drm:intel_sdvo_detect] SDVO response 0 0 [1] [ 22.117460] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:17:HDMI-A-1] disconnected [ 22.117557] [drm:drm_mode_getconnector] [CONNECTOR:17:?] [ 22.117559] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:17:HDMI-A-1] [ 22.117561] [drm:intel_sdvo_detect] [CONNECTOR:17:HDMI-A-1] [ 22.117564] [drm:intel_sdvo_debug_write] SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS) [ 22.122640] [drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00 [ 22.122643] [drm:intel_sdvo_detect] SDVO response 0 0 [1] [ 22.122645] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:17:HDMI-A-1] disconnected [ 22.483499] audit_printk_skb: 192 callbacks suppressed [ 22.483503] audit: type=1400 audit(1402306864.792:76): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cups-browsed" pid=911 comm="apparmor_parser" [ 22.848724] init: kdm main process (832) killed by TERM signal [ 26.580245] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 27.916225] [drm:i915_gem_open] [ 29.031041] [drm:i915_gem_open] [ 29.031057] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3] [ 29.054856] [drm:i915_gem_open] [ 29.054865] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3] [ 29.054868] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3] [ 29.079941] [drm:drm_mode_addfb] [FB:24] [ 29.080403] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3] [ 29.080407] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3] [ 29.080433] [drm:drm_mode_getconnector] [CONNECTOR:8:?] [ 29.080438] [drm:drm_mode_getconnector] [CONNECTOR:8:?] [ 29.081374] [drm:drm_mode_getconnector] [CONNECTOR:14:?] [ 29.081383] [drm:drm_mode_getconnector] [CONNECTOR:14:?] [ 29.081422] [drm:drm_mode_getconnector] [CONNECTOR:17:?] [ 29.081429] [drm:drm_mode_getconnector] [CONNECTOR:17:?] [ 29.342709] [drm:drm_mode_addfb] [FB:24] [ 29.342720] [drm:drm_mode_setcrtc] [CRTC:5] [ 29.342726] [drm:drm_mode_setcrtc] [CONNECTOR:8:LVDS-1] [ 29.342729] [drm:intel_crtc_set_config] [CRTC:5] [FB:24] #connectors=1 (x y) (0 0) [ 29.342733] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=1 [ 29.342735] [drm:intel_modeset_stage_output_state] [CONNECTOR:8:LVDS-1] to [CRTC:5] [ 29.343190] wlan0: authenticate with 00:04:ed:d6:76:40 [ 29.344838] [drm:i965_irq_handler] *ERROR* pipe B underrun [ 29.344878] [drm:i9xx_update_primary_plane] Writing base 00B48000 00000000 0 0 5120 [ 29.360642] wlan0: send auth to 00:04:ed:d6:76:40 (try 1/3) [ 29.361734] wlan0: authenticated [ 29.361861] wlan0: waiting for beacon from 00:04:ed:d6:76:40 [ 29.408050] wlan0: associate with 00:04:ed:d6:76:40 (try 1/3) [ 29.422531] wlan0: RX AssocResp from 00:04:ed:d6:76:40 (capab=0x411 status=0 aid=11) [ 29.448289] wlan0: associated [ 29.448331] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 29.813681] init: plymouth-upstart-bridge main process ended, respawning [ 29.821909] init: plymouth-upstart-bridge main process (1191) terminated with status 1 [ 29.821925] init: plymouth-upstart-bridge main process ended, respawning [ 35.370093] [drm:i965_update_wm] self-refresh entries: 80, wm: 432 [ 35.370097] [drm:i965_update_wm] self-refresh watermark: display plane 432 cursor 32 [ 35.370099] [drm:i965_update_wm] Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 432 [ 41.154424] [drm:drm_mode_getconnector] [CONNECTOR:8:?] [ 41.154431] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] [ 41.154434] [drm:intel_lvds_detect] [CONNECTOR:8:LVDS-1] [ 41.154445] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] probed modes : [ 41.154448] [drm:drm_mode_debug_printmodeline] Modeline 11:"1280x800" 60 71000 1280 1328 1360 1440 800 803 809 823 0x48 0xa [ 41.154452] [drm:drm_mode_getconnector] [CONNECTOR:8:?] [ 41.154723] [drm:drm_mode_getconnector] [CONNECTOR:14:?] [ 41.154726] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] [ 41.154730] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=1 [ 41.168040] [drm:intel_crt_detect] CRT not detected via hotplug [ 41.172028] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 41.172032] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 41.172033] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 41.172035] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 41.172305] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 41.172306] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 41.172308] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 41.172312] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] disconnected [ 41.172336] [drm:drm_mode_getconnector] [CONNECTOR:17:?] [ 41.172340] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:17:HDMI-A-1] [ 41.172342] [drm:intel_sdvo_detect] [CONNECTOR:17:HDMI-A-1] [ 41.172346] [drm:intel_sdvo_debug_write] SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS) [ 41.176620] [drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00 [ 41.176622] [drm:intel_sdvo_detect] SDVO response 0 0 [1] [ 41.176624] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:17:HDMI-A-1] disconnected [ 42.541766] [drm:intel_sdvo_detect] [CONNECTOR:17:HDMI-A-1] [ 42.541775] [drm:intel_sdvo_debug_write] SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS) [ 42.547064] [drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00 [ 42.547069] [drm:intel_sdvo_detect] SDVO response 0 0 [1] [ 42.547127] [drm:intel_lvds_detect] [CONNECTOR:8:LVDS-1] [ 42.547157] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=1 [ 42.560060] [drm:intel_crt_detect] CRT not detected via hotplug [ 42.564056] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 42.564061] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 42.564064] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 42.564068] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 42.564346] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 42.564348] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 42.564349] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 43.472572] [drm:intel_crtc_cursor_set] cursor off [ 43.707095] [drm:intel_crtc_cursor_set] cursor off [ 44.730156] [drm:drm_mode_getconnector] [CONNECTOR:8:?] [ 44.730163] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] [ 44.730166] [drm:intel_lvds_detect] [CONNECTOR:8:LVDS-1] [ 44.730176] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] probed modes : [ 44.730180] [drm:drm_mode_debug_printmodeline] Modeline 11:"1280x800" 60 71000 1280 1328 1360 1440 800 803 809 823 0x48 0xa [ 44.730183] [drm:drm_mode_getconnector] [CONNECTOR:8:?] [ 44.730362] [drm:drm_mode_getconnector] [CONNECTOR:14:?] [ 44.730365] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] [ 44.730368] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=1 [ 44.744106] [drm:intel_crt_detect] CRT not detected via hotplug [ 44.748131] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 44.748136] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 44.748140] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 44.748144] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 44.748433] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 44.748435] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 44.748436] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 44.748439] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] disconnected [ 44.748463] [drm:drm_mode_getconnector] [CONNECTOR:17:?] [ 44.748465] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:17:HDMI-A-1] [ 44.748467] [drm:intel_sdvo_detect] [CONNECTOR:17:HDMI-A-1] [ 44.748471] [drm:intel_sdvo_debug_write] SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS) [ 44.752723] [drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00 [ 44.752725] [drm:intel_sdvo_detect] SDVO response 0 0 [1] [ 44.752727] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:17:HDMI-A-1] disconnected [ 48.664081] audit: type=1400 audit(1402306890.976:77): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1926 comm="apparmor_parser" [ 48.664089] audit: type=1400 audit(1402306890.976:78): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1926 comm="apparmor_parser" [ 48.664564] audit: type=1400 audit(1402306890.976:79): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1926 comm="apparmor_parser" [ 48.765339] [drm:i915_gem_open] [ 53.009191] [drm:drm_mode_getconnector] [CONNECTOR:8:?] [ 53.009198] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] [ 53.009201] [drm:intel_lvds_detect] [CONNECTOR:8:LVDS-1] [ 53.009212] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] probed modes : [ 53.009216] [drm:drm_mode_debug_printmodeline] Modeline 11:"1280x800" 60 71000 1280 1328 1360 1440 800 803 809 823 0x48 0xa [ 53.009219] [drm:drm_mode_getconnector] [CONNECTOR:8:?] [ 53.009394] [drm:drm_mode_getconnector] [CONNECTOR:14:?] [ 53.009397] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] [ 53.009400] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=1 [ 53.016037] [drm:intel_crt_detect] CRT not detected via hotplug [ 53.020058] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 53.020066] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 53.020069] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 53.020077] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 53.020351] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 53.020353] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 53.020354] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 53.020357] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] disconnected [ 53.020372] [drm:drm_mode_getconnector] [CONNECTOR:17:?] [ 53.020374] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:17:HDMI-A-1] [ 53.020377] [drm:intel_sdvo_detect] [CONNECTOR:17:HDMI-A-1] [ 53.020381] [drm:intel_sdvo_debug_write] SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS) [ 53.024659] [drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00 [ 53.024661] [drm:intel_sdvo_detect] SDVO response 0 0 [1] [ 53.024663] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:17:HDMI-A-1] disconnected [ 53.581606] [drm:i915_gem_open] [ 53.720774] [drm:i915_gem_open] [ 53.794566] [drm:intel_crtc_cursor_set] cursor off [ 54.896632] [drm:intel_crtc_cursor_set] cursor off [ 56.172691] [drm:drm_mode_getconnector] [CONNECTOR:8:?] [ 56.172698] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] [ 56.172700] [drm:intel_lvds_detect] [CONNECTOR:8:LVDS-1] [ 56.172711] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] probed modes : [ 56.172714] [drm:drm_mode_debug_printmodeline] Modeline 11:"1280x800" 60 71000 1280 1328 1360 1440 800 803 809 823 0x48 0xa [ 56.172717] [drm:drm_mode_getconnector] [CONNECTOR:8:?] [ 56.172889] [drm:drm_mode_getconnector] [CONNECTOR:14:?] [ 56.172893] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] [ 56.172896] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=1 [ 56.180034] [drm:intel_crt_detect] CRT not detected via hotplug [ 56.184056] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 56.184062] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 56.184066] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 56.184075] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 56.184346] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 56.184347] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 56.184349] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 56.184352] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] disconnected [ 56.184368] [drm:drm_mode_getconnector] [CONNECTOR:17:?] [ 56.184371] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:17:HDMI-A-1] [ 56.184373] [drm:intel_sdvo_detect] [CONNECTOR:17:HDMI-A-1] [ 56.184377] [drm:intel_sdvo_debug_write] SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS) [ 56.188693] [drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00 [ 56.188696] [drm:intel_sdvo_detect] SDVO response 0 0 [1] [ 56.188698] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:17:HDMI-A-1] disconnected [ 59.739330] [drm:drm_mode_getconnector] [CONNECTOR:8:?] [ 59.739337] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] [ 59.739339] [drm:intel_lvds_detect] [CONNECTOR:8:LVDS-1] [ 59.739359] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] probed modes : [ 59.739363] [drm:drm_mode_debug_printmodeline] Modeline 11:"1280x800" 60 71000 1280 1328 1360 1440 800 803 809 823 0x48 0xa [ 59.739367] [drm:drm_mode_getconnector] [CONNECTOR:8:?] [ 59.739530] [drm:drm_mode_getconnector] [CONNECTOR:14:?] [ 59.739533] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] [ 59.739536] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=1 [ 59.752037] [drm:intel_crt_detect] CRT not detected via hotplug [ 59.756143] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 59.756149] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 59.756151] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 59.756154] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 59.756424] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 59.756426] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 59.756428] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 59.756432] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] disconnected [ 59.756458] [drm:drm_mode_getconnector] [CONNECTOR:17:?] [ 59.756461] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:17:HDMI-A-1] [ 59.756464] [drm:intel_sdvo_detect] [CONNECTOR:17:HDMI-A-1] [ 59.756468] [drm:intel_sdvo_debug_write] SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS) [ 59.760742] [drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00 [ 59.760744] [drm:intel_sdvo_detect] SDVO response 0 0 [1] [ 59.760746] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:17:HDMI-A-1] disconnected [ 61.305710] [drm:drm_mode_getconnector] [CONNECTOR:8:?] [ 61.305718] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] [ 61.305721] [drm:intel_lvds_detect] [CONNECTOR:8:LVDS-1] [ 61.305737] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] probed modes : [ 61.305742] [drm:drm_mode_debug_printmodeline] Modeline 11:"1280x800" 60 71000 1280 1328 1360 1440 800 803 809 823 0x48 0xa [ 61.305745] [drm:drm_mode_getconnector] [CONNECTOR:8:?] [ 61.305920] [drm:drm_mode_getconnector] [CONNECTOR:14:?] [ 61.305923] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] [ 61.305926] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=1 [ 61.313098] [drm:intel_crt_detect] CRT not detected via hotplug [ 61.316169] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 61.316173] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 61.316176] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 61.316178] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 61.316449] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 61.316451] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 61.316453] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 61.316457] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] disconnected [ 61.316486] [drm:drm_mode_getconnector] [CONNECTOR:17:?] [ 61.316489] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:17:HDMI-A-1] [ 61.316492] [drm:intel_sdvo_detect] [CONNECTOR:17:HDMI-A-1] [ 61.316496] [drm:intel_sdvo_debug_write] SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS) [ 61.320778] [drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00 [ 61.320780] [drm:intel_sdvo_detect] SDVO response 0 0 [1] [ 61.320782] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:17:HDMI-A-1] disconnected [ 61.494313] [drm:i915_gem_open] [ 62.309108] [drm:drm_mode_getconnector] [CONNECTOR:8:?] [ 62.309115] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] [ 62.309118] [drm:intel_lvds_detect] [CONNECTOR:8:LVDS-1] [ 62.309129] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] probed modes : [ 62.309133] [drm:drm_mode_debug_printmodeline] Modeline 11:"1280x800" 60 71000 1280 1328 1360 1440 800 803 809 823 0x48 0xa [ 62.309136] [drm:drm_mode_getconnector] [CONNECTOR:8:?] [ 62.309294] [drm:drm_mode_getconnector] [CONNECTOR:14:?] [ 62.309297] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] [ 62.309300] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=1 [ 62.316053] [drm:intel_crt_detect] CRT not detected via hotplug [ 62.320095] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 62.320101] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 62.320104] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 62.320108] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 62.320386] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 62.320388] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 62.320389] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 62.320392] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] disconnected [ 62.320408] [drm:drm_mode_getconnector] [CONNECTOR:17:?] [ 62.320410] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:17:HDMI-A-1] [ 62.320413] [drm:intel_sdvo_detect] [CONNECTOR:17:HDMI-A-1] [ 62.320418] [drm:intel_sdvo_debug_write] SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS) [ 62.324693] [drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00 [ 62.324695] [drm:intel_sdvo_detect] SDVO response 0 0 [1] [ 62.324697] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:17:HDMI-A-1] disconnected [ 76.045248] [drm:drm_mode_addfb] [FB:23] [ 78.661741] [drm:drm_mode_getconnector] [CONNECTOR:8:?] [ 78.661748] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] [ 78.661750] [drm:intel_lvds_detect] [CONNECTOR:8:LVDS-1] [ 78.661761] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] probed modes : [ 78.661765] [drm:drm_mode_debug_printmodeline] Modeline 11:"1280x800" 60 71000 1280 1328 1360 1440 800 803 809 823 0x48 0xa [ 78.661768] [drm:drm_mode_getconnector] [CONNECTOR:8:?] [ 78.661926] [drm:drm_mode_getconnector] [CONNECTOR:14:?] [ 78.661929] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] [ 78.661932] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=1 [ 78.676050] [drm:intel_crt_detect] CRT not detected via hotplug [ 78.680052] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 78.680057] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 78.680065] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 78.680069] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 78.680345] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 78.680347] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 78.680348] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 78.680351] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] disconnected [ 78.680366] [drm:drm_mode_getconnector] [CONNECTOR:17:?] [ 78.680369] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:17:HDMI-A-1] [ 78.680371] [drm:intel_sdvo_detect] [CONNECTOR:17:HDMI-A-1] [ 78.680375] [drm:intel_sdvo_debug_write] SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS) [ 78.684655] [drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00 [ 78.684657] [drm:intel_sdvo_detect] SDVO response 0 0 [1] [ 78.684659] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:17:HDMI-A-1] disconnected [ 78.684942] [drm:drm_mode_getconnector] [CONNECTOR:8:?] [ 78.684945] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] [ 78.684947] [drm:intel_lvds_detect] [CONNECTOR:8:LVDS-1] [ 78.684955] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] probed modes : [ 78.684958] [drm:drm_mode_debug_printmodeline] Modeline 11:"1280x800" 60 71000 1280 1328 1360 1440 800 803 809 823 0x48 0xa [ 78.684961] [drm:drm_mode_getconnector] [CONNECTOR:8:?] [ 78.685110] [drm:drm_mode_getconnector] [CONNECTOR:14:?] [ 78.685113] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] [ 78.685115] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=1 [ 78.692016] [drm:intel_crt_detect] CRT not detected via hotplug [ 78.696051] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 78.696056] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 78.696063] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 78.696067] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 78.696341] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 78.696343] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 78.696344] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 78.696347] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] disconnected [ 78.696383] [drm:drm_mode_getconnector] [CONNECTOR:17:?] [ 78.696386] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:17:HDMI-A-1] [ 78.696388] [drm:intel_sdvo_detect] [CONNECTOR:17:HDMI-A-1] [ 78.696392] [drm:intel_sdvo_debug_write] SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS) [ 78.700684] [drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00 [ 78.700686] [drm:intel_sdvo_detect] SDVO response 0 0 [1] [ 78.700688] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:17:HDMI-A-1] disconnected [ 97.657785] [drm:intel_crtc_cursor_set] cursor off [ 103.426316] [drm:intel_crtc_cursor_set] cursor off [ 156.667136] PM: Syncing filesystems ... done. [ 156.791858] PM: Preparing system for mem sleep [ 156.792219] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 156.793888] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 156.795164] PM: Entering mem sleep [ 156.795187] Suspending console(s) (use no_console_suspend to debug) [ 156.795522] wlan0: deauthenticating from 00:04:ed:d6:76:40 by local choice (Reason: 3=DEAUTH_LEAVING) [ 156.832412] cfg80211: Calling CRDA to update world regulatory domain [ 156.832498] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 156.832621] sd 2:0:0:0: [sda] Stopping disk [ 156.883445] [drm:i915_get_vblank_counter] trying to get vblank count for disabled pipe B [ 157.104062] [drm:i965_update_wm] Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 1 [ 157.104065] [drm:intel_update_fbc] no output, disabling [ 157.324265] PM: suspend of devices complete after 528.798 msecs [ 157.340133] PM: late suspend of devices complete after 15.861 msecs [ 157.340725] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI [ 157.340781] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI [ 157.340902] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI [ 157.340976] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI [ 157.356136] PM: noirq suspend of devices complete after 15.999 msecs [ 157.356500] ACPI: Preparing to enter system sleep state S3 [ 157.372041] PM: Saving platform NVS memory [ 157.372123] Disabling non-boot CPUs ... [ 157.373449] kvm: disabling virtualization on CPU1 [ 157.476046] smpboot: CPU 1 is now offline [ 157.476245] ACPI: Low-level resume complete [ 157.476245] PM: Restoring platform NVS memory [ 157.476245] CPU0: Thermal monitoring handled by SMI [ 157.476245] Enabling non-boot CPUs ... [ 157.476245] x86: Booting SMP configuration: [ 157.476245] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 157.373452] Initializing CPU#1 [ 157.373452] CPU1: Thermal monitoring handled by SMI [ 157.373452] kvm: enabling virtualization on CPU1 [ 157.487893] CPU1 is up [ 157.489671] ACPI: Waking up from system sleep state S3 [ 157.489885] ACPI: \_SB_.PCI0: Unknown event type 0x8 [ 157.489899] ACPI: \_SB_.PCI0.RP01: ACPI_NOTIFY_BUS_CHECK event [ 157.489933] ACPI: \_SB_.PCI0.RP04: ACPI_NOTIFY_BUS_CHECK event [ 157.582855] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI [ 157.583655] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI [ 157.583690] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI [ 157.596185] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI [ 157.596543] PM: noirq resume of devices complete after 13.802 msecs [ 157.596777] PM: early resume of devices complete after 0.198 msecs [ 157.600209] usb usb3: root hub lost power or was reset [ 157.600367] usb usb4: root hub lost power or was reset [ 157.600655] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X [ 157.600866] usb usb5: root hub lost power or was reset [ 157.601021] usb usb6: root hub lost power or was reset [ 157.601175] usb usb7: root hub lost power or was reset [ 157.602194] ata2: port disabled--ignoring [ 157.602882] sd 2:0:0:0: [sda] Starting disk [ 157.634067] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it [ 157.634375] [drm:intel_opregion_setup] graphic opregion physical addr: 0xbf6e0b0d [ 157.634389] [drm:intel_opregion_setup] Public ACPI methods supported [ 157.634390] [drm:intel_opregion_setup] SWSCI supported [ 157.660035] [drm:swsci_setup] SWSCI GBDA callbacks 000004f3, SBCB callbacks 00000241 [ 157.660037] [drm:intel_opregion_setup] ASLE supported [ 157.660047] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000 [ 157.660051] [drm:i915_pages_create_for_stolen] offset=0x300000, size=131072 [ 157.660121] [drm:intel_modeset_readout_hw_state] [CRTC:5] hw state readout: disabled [ 157.660123] [drm:intel_modeset_readout_hw_state] [CRTC:7] hw state readout: disabled [ 157.660128] [drm:intel_modeset_readout_hw_state] [ENCODER:9:LVDS-9] hw state readout: disabled, pipe A [ 157.660131] [drm:intel_modeset_readout_hw_state] [ENCODER:15:DAC-15] hw state readout: disabled, pipe A [ 157.660143] [drm:intel_sdvo_debug_write] SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS) [ 157.664398] [drm:intel_sdvo_read_response] SDVOB: R: (Success) 01 00 [ 157.664399] ------------[ cut here ]------------ [ 157.664437] WARNING: CPU: 0 PID: 57 at drivers/gpu/drm/i915/intel_sdvo.c:1331 intel_sdvo_get_hw_state+0x62/0xb0 [i915]() [ 157.664462] Modules linked in: ctr(E) ccm(E) rfcomm(E) bnep(E) dm_crypt(E) btusb(E) bluetooth(E) uvcvideo(E) videobuf2_vmalloc(E) videobuf2_memops(E) videobuf2_core(E) videodev(E) arc4(E) coretemp(E) snd_hda_codec_hdmi(E) snd_hda_codec_conexant(E) snd_hda_codec_generic(E) snd_hda_intel(E) iwl4965(E) iwlegacy(E) mac80211(E) kvm_intel(E) snd_hda_controller(E) kvm(E) snd_hda_codec(E) cfg80211(E) snd_hwdep(E) snd_pcm(E) microcode(E) snd_seq_midi(E) snd_seq_midi_event(E) snd_rawmidi(E) snd_seq(E) joydev(E) toshiba_acpi(E) snd_seq_device(E) serio_raw(E) lpc_ich(E) sparse_keymap(E) toshiba_bluetooth(E) snd_timer(E) snd(E) soundcore(E) mac_hid(E) parport_pc(E) ppdev(E) lp(E) parport(E) firewire_ohci(E) psmouse(E) firewire_core(E) crc_itu_t(E) sdhci_pci(E) ahci(E) sdhci(E) libahci(E) wmi(E) i915(E) video(E) i2c_algo_bit(E) drm_kms_helper(E) drm(E) [ 157.664468] CPU: 0 PID: 57 Comm: kworker/u4:3 Tainted: G E 3.15.0-rc8-intelfix #15 [ 157.664468] Hardware name: TOSHIBA Satellite U400/Satellite U400, BIOS V4.70 10/25/2010 [ 157.664473] Workqueue: events_unbound async_run_entry_fn [ 157.664477] 00000000 00000000 f6161d68 c16676b6 00000000 f6161d98 c105554e c18664d8 [ 157.664480] 00000000 00000039 f877bdbc 00000533 f875ab12 f875ab12 f62b1c00 0000001c [ 157.664483] f615b400 f6161da8 c1055612 00000009 00000000 f6161dc8 f875ab12 00000002 [ 157.664483] Call Trace: [ 157.664488] [] dump_stack+0x41/0x52 [ 157.664491] [] warn_slowpath_common+0x7e/0xa0 [ 157.664513] [] ? intel_sdvo_get_hw_state+0x62/0xb0 [i915] [ 157.664534] [] ? intel_sdvo_get_hw_state+0x62/0xb0 [i915] [ 157.664536] [] warn_slowpath_null+0x22/0x30 [ 157.664557] [] intel_sdvo_get_hw_state+0x62/0xb0 [i915] [ 157.664577] [] intel_modeset_setup_hw_state+0x1fa/0xb50 [i915] [ 157.664592] [] __i915_drm_thaw+0xfa/0x1b0 [i915] [ 157.664604] [] i915_resume+0x23/0x40 [i915] [ 157.664616] [] i915_pm_resume+0x12/0x20 [i915] [ 157.664619] [] pci_pm_resume+0x4f/0x90 [ 157.664620] [] ? pci_pm_thaw+0x80/0x80 [ 157.664623] [] dpm_run_callback+0x3a/0x90 [ 157.664625] [] ? __wake_up_locked+0x1f/0x30 [ 157.664627] [] device_resume+0x9d/0x190 [ 157.664629] [] async_resume+0x1e/0x50 [ 157.664631] [] ? try_to_wake_up+0x150/0x240 [ 157.664633] [] async_run_entry_fn+0x35/0x140 [ 157.664634] [] ? wake_up_process+0x1f/0x40 [ 157.664636] [] process_one_work+0x11b/0x3b0 [ 157.664639] [] ? start_worker+0x25/0x30 [ 157.664640] [] ? manage_workers.isra.28+0x1ad/0x290 [ 157.664642] [] worker_thread+0xf9/0x380 [ 157.664643] [] ? rescuer_thread+0x380/0x380 [ 157.664646] [] kthread+0xa1/0xc0 [ 157.664648] [] ret_from_kernel_thread+0x21/0x30 [ 157.664650] [] ? kthread_create_on_node+0x110/0x110 [ 157.664651] ---[ end trace 91d5e1ca0749b19f ]--- [ 157.664654] [drm:intel_sdvo_debug_write] SDVOB: W: 12 (SDVO_CMD_GET_INPUT_TIMINGS_PART1) [ 157.853141] [drm:intel_sdvo_read_response] SDVOB: R: ... failed [ 157.853142] [drm:intel_sdvo_get_config] failed to retrieve SDVO DTD [ 157.853145] [drm:intel_sdvo_debug_write] SDVOB: W: 20 (SDVO_CMD_GET_CLOCK_RATE_MULT) [ 157.924257] ata5: SATA link down (SStatus 0 SControl 300) [ 157.924290] ata4: SATA link down (SStatus 0 SControl 300) [ 157.932624] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 157.932626] ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out [ 157.936238] usb 2-4: reset high-speed USB device number 3 using ehci-pci [ 157.948362] ata1.00: configured for UDMA/33 [ 157.996802] toshiba_bluetooth: Re-enabling Toshiba Bluetooth [ 158.048954] [drm:intel_sdvo_read_response] SDVOB: R: ... failed [ 158.048954] ------------[ cut here ]------------ [ 158.048978] WARNING: CPU: 0 PID: 57 at drivers/gpu/drm/i915/intel_sdvo.c:1413 intel_sdvo_get_config+0x190/0x1b0 [i915]() [ 158.048979] SDVO pixel multiplier mismatch, port: 1, encoder: 0 [ 158.049000] Modules linked in: ctr(E) ccm(E) rfcomm(E) bnep(E) dm_crypt(E) btusb(E) bluetooth(E) uvcvideo(E) videobuf2_vmalloc(E) videobuf2_memops(E) videobuf2_core(E) videodev(E) arc4(E) coretemp(E) snd_hda_codec_hdmi(E) snd_hda_codec_conexant(E) snd_hda_codec_generic(E) snd_hda_intel(E) iwl4965(E) iwlegacy(E) mac80211(E) kvm_intel(E) snd_hda_controller(E) kvm(E) snd_hda_codec(E) cfg80211(E) snd_hwdep(E) snd_pcm(E) microcode(E) snd_seq_midi(E) snd_seq_midi_event(E) snd_rawmidi(E) snd_seq(E) joydev(E) toshiba_acpi(E) snd_seq_device(E) serio_raw(E) lpc_ich(E) sparse_keymap(E) toshiba_bluetooth(E) snd_timer(E) snd(E) soundcore(E) mac_hid(E) parport_pc(E) ppdev(E) lp(E) parport(E) firewire_ohci(E) psmouse(E) firewire_core(E) crc_itu_t(E) sdhci_pci(E) ahci(E) sdhci(E) libahci(E) wmi(E) i915(E) video(E) i2c_algo_bit(E) drm_kms_helper(E) drm(E) [ 158.049003] CPU: 0 PID: 57 Comm: kworker/u4:3 Tainted: G W E 3.15.0-rc8-intelfix #15 [ 158.049004] Hardware name: TOSHIBA Satellite U400/Satellite U400, BIOS V4.70 10/25/2010 [ 158.049006] Workqueue: events_unbound async_run_entry_fn [ 158.049010] 00000000 00000000 f6161d40 c16676b6 f6161d80 f6161d70 c105554e f877c064 [ 158.049012] f6161d9c 00000039 f877bdbc 00000585 f875c030 f875c030 f612d654 f62b4000 [ 158.049015] f62b1c00 f6161d88 c10555a3 00000009 f6161d80 f877c064 f6161d9c f6161dc8 [ 158.049016] Call Trace: [ 158.049018] [] dump_stack+0x41/0x52 [ 158.049020] [] warn_slowpath_common+0x7e/0xa0 [ 158.049042] [] ? intel_sdvo_get_config+0x190/0x1b0 [i915] [ 158.049063] [] ? intel_sdvo_get_config+0x190/0x1b0 [i915] [ 158.049065] [] warn_slowpath_fmt+0x33/0x40 [ 158.049087] [] intel_sdvo_get_config+0x190/0x1b0 [i915] [ 158.049109] [] ? intel_sdvo_get_hw_state+0x62/0xb0 [i915] [ 158.049129] [] intel_modeset_setup_hw_state+0x219/0xb50 [i915] [ 158.049144] [] __i915_drm_thaw+0xfa/0x1b0 [i915] [ 158.049156] [] i915_resume+0x23/0x40 [i915] [ 158.049167] [] i915_pm_resume+0x12/0x20 [i915] [ 158.049169] [] pci_pm_resume+0x4f/0x90 [ 158.049170] [] ? pci_pm_thaw+0x80/0x80 [ 158.049172] [] dpm_run_callback+0x3a/0x90 [ 158.049174] [] ? __wake_up_locked+0x1f/0x30 [ 158.049176] [] device_resume+0x9d/0x190 [ 158.049177] [] async_resume+0x1e/0x50 [ 158.049179] [] ? try_to_wake_up+0x150/0x240 [ 158.049181] [] async_run_entry_fn+0x35/0x140 [ 158.049182] [] ? wake_up_process+0x1f/0x40 [ 158.049184] [] process_one_work+0x11b/0x3b0 [ 158.049186] [] ? start_worker+0x25/0x30 [ 158.049187] [] ? manage_workers.isra.28+0x1ad/0x290 [ 158.049189] [] worker_thread+0xf9/0x380 [ 158.049190] [] ? rescuer_thread+0x380/0x380 [ 158.049192] [] kthread+0xa1/0xc0 [ 158.049194] [] ret_from_kernel_thread+0x21/0x30 [ 158.049196] [] ? kthread_create_on_node+0x110/0x110 [ 158.049197] ---[ end trace 91d5e1ca0749b1a0 ]--- [ 158.049199] [drm:intel_modeset_readout_hw_state] [ENCODER:16:TMDS-16] hw state readout: enabled, pipe A [ 158.049201] [drm:intel_modeset_readout_hw_state] [CONNECTOR:8:LVDS-1] hw state readout: disabled [ 158.049203] [drm:intel_modeset_readout_hw_state] [CONNECTOR:14:VGA-1] hw state readout: disabled [ 158.049205] [drm:intel_sdvo_debug_write] SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS) [ 158.053477] [drm:intel_sdvo_read_response] SDVOB: R: (Success) 01 00 [ 158.053479] [drm:intel_modeset_readout_hw_state] [CONNECTOR:17:HDMI-A-1] hw state readout: enabled [ 158.053480] [drm:intel_sanitize_encoder] [ENCODER:16:TMDS-16] has active connectors but no active pipe! [ 158.053482] [drm:intel_sanitize_encoder] [ENCODER:16:TMDS-16] manually disabled [ 158.053484] [drm:intel_sdvo_debug_write] SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS) [ 158.057295] [drm:intel_sdvo_read_response] SDVOB: R: (Success) [ 158.057299] [drm:intel_dump_pipe_config] [CRTC:5][setup_hw_state] config for pipe A [ 158.057300] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 158.057301] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 158.057302] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 158.057303] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 158.057304] [drm:intel_dump_pipe_config] requested mode: [ 158.057306] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 158.057306] [drm:intel_dump_pipe_config] adjusted mode: [ 158.057308] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 158.057309] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 158.057310] [drm:intel_dump_pipe_config] port clock: 0 [ 158.057311] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 158.057312] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 158.057313] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 158.057313] [drm:intel_dump_pipe_config] ips: 0 [ 158.057314] [drm:intel_dump_pipe_config] double wide: 0 [ 158.057315] [drm:intel_dump_pipe_config] [CRTC:7][setup_hw_state] config for pipe B [ 158.057316] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 158.057317] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 158.057318] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 158.057319] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 158.057319] [drm:intel_dump_pipe_config] requested mode: [ 158.057321] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 158.057322] [drm:intel_dump_pipe_config] adjusted mode: [ 158.057323] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 158.057324] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 158.057325] [drm:intel_dump_pipe_config] port clock: 0 [ 158.057326] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 158.057327] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 158.057328] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 158.057328] [drm:intel_dump_pipe_config] ips: 0 [ 158.057329] [drm:intel_dump_pipe_config] double wide: 0 [ 158.057331] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 158.057333] [drm:connected_sink_compute_bpp] [CONNECTOR:8:LVDS-1] checking for sink bpp constrains [ 158.057336] [drm:intel_lvds_compute_config] forcing display bpp (was 24) to LVDS (18) [ 158.057337] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1 [ 158.057338] [drm:intel_dump_pipe_config] [CRTC:5][modeset] config for pipe A [ 158.057339] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 158.057340] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 158.057341] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 158.057342] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 158.057342] [drm:intel_dump_pipe_config] requested mode: [ 158.057344] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x800" 60 71000 1280 1328 1360 1440 800 803 809 823 0x48 0xa [ 158.057345] [drm:intel_dump_pipe_config] adjusted mode: [ 158.057347] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x800" 60 71000 1280 1328 1360 1440 800 803 809 823 0x48 0xa [ 158.057348] [drm:intel_dump_crtc_timings] crtc timings: 71000 1280 1328 1360 1440 800 803 809 823, type: 0x48 flags: 0xa [ 158.057349] [drm:intel_dump_pipe_config] port clock: 71000 [ 158.057350] [drm:intel_dump_pipe_config] pipe src size: 1280x800 [ 158.057351] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 158.057352] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 158.057352] [drm:intel_dump_pipe_config] ips: 0 [ 158.057353] [drm:intel_dump_pipe_config] double wide: 0 [ 158.057357] [drm:i9xx_get_refclk] using SSC reference clock of 96000 kHz [ 158.057445] [drm:i9xx_update_primary_plane] Writing base 036E7000 00000000 0 0 5120 [ 158.057450] [drm:intel_crtc_mode_set] [ENCODER:9:LVDS-9] set [MODE:0:1280x800] [ 158.058084] [drm:i965_update_wm] self-refresh entries: 80, wm: 432 [ 158.058084] [drm:i965_update_wm] self-refresh watermark: display plane 432 cursor 32 [ 158.058085] [drm:i965_update_wm] Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 432 [ 158.076049] [drm:intel_update_fbc] disabled per chip default [ 158.088026] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 158.088031] [drm:intel_connector_check_state] [CONNECTOR:8:LVDS-1] [ 158.088037] [drm:intel_sdvo_debug_write] SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS) [ 158.092309] [drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00 [ 158.092310] [drm:check_encoder_state] [ENCODER:9:LVDS-9] [ 158.092312] [drm:check_encoder_state] [ENCODER:15:DAC-15] [ 158.092313] [drm:check_encoder_state] [ENCODER:16:TMDS-16] [ 158.092316] [drm:intel_sdvo_debug_write] SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS) [ 158.096578] [drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00 [ 158.096579] [drm:check_crtc_state] [CRTC:5] [ 158.096585] [drm:check_crtc_state] [CRTC:7] [ 158.096588] [drm:intel_resume_hotplug] running encoder hotplug functions [ 158.096590] [drm:intel_sdvo_debug_write] SDVOB: W: 0D 01 00 (SDVO_CMD_SET_ACTIVE_HOT_PLUG) [ 158.099434] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=0 [ 158.108028] [drm:intel_crt_detect] CRT not detected via hotplug [ 158.116046] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 158.116048] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 158.116050] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 158.116052] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 158.116325] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 158.116326] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 158.116327] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 158.116329] [drm:drm_helper_hpd_irq_event] [CONNECTOR:14:VGA-1] status updated from unknown to disconnected [ 158.116330] [drm:intel_sdvo_detect] [CONNECTOR:17:HDMI-A-1] [ 158.116332] [drm:intel_sdvo_debug_write] SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS) [ 158.120587] [drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00 [ 158.120588] [drm:intel_sdvo_detect] SDVO response 0 0 [1] [ 158.120590] [drm:drm_helper_hpd_irq_event] [CONNECTOR:17:HDMI-A-1] status updated from unknown to disconnected [ 158.156084] firewire_core 0000:0a:01.0: rediscovered device fw0 [ 158.184248] usb 5-2: reset full-speed USB device number 2 using uhci_hcd [ 158.432068] usb 6-1: reset full-speed USB device number 2 using uhci_hcd [ 158.590263] PM: resume of devices complete after 993.482 msecs [ 158.590845] PM: Finishing wakeup. [ 158.590846] Restarting tasks ... [ 158.590854] ACPI: \_SB_.PCI0.RP01: Bus check in hotplug_event() [ 158.590873] ACPI: \_SB_.PCI0.RP04: Bus check in hotplug_event() [ 158.595303] cfg80211: World regulatory domain updated: [ 158.595308] cfg80211: DFS Master region: unset [ 158.595310] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 158.595313] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 158.595315] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 158.595317] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 158.595319] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 158.595321] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 158.601453] [drm:drm_mode_getconnector] [CONNECTOR:8:?] [ 158.601459] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] [ 158.601462] [drm:intel_lvds_detect] [CONNECTOR:8:LVDS-1] [ 158.601474] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:8:LVDS-1] probed modes : [ 158.601478] [drm:drm_mode_debug_printmodeline] Modeline 11:"1280x800" 60 71000 1280 1328 1360 1440 800 803 809 823 0x48 0xa [ 158.601481] [drm:drm_mode_getconnector] [CONNECTOR:8:?] [ 158.601646] [drm:drm_mode_getconnector] [CONNECTOR:14:?] [ 158.601650] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] [ 158.601653] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=1 [ 158.602540] done. [ 158.602725] video LNXVIDEO:01: Restoring backlight state [ 158.608046] [drm:intel_crt_detect] CRT not detected via hotplug [ 158.612176] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 158.612181] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 158.612183] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 158.612186] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 158.612460] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 158.612462] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 158.612464] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 158.612469] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:VGA-1] disconnected [ 158.612482] [drm:intel_sdvo_detect] [CONNECTOR:17:HDMI-A-1] [ 158.612488] [drm:intel_sdvo_debug_write] SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS) [ 158.612492] [drm:drm_mode_getconnector] [CONNECTOR:17:?] [ 158.616789] [drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00 [ 158.616792] [drm:intel_sdvo_detect] SDVO response 0 0 [1] [ 158.616851] [drm:intel_lvds_detect] [CONNECTOR:8:LVDS-1] [ 158.616872] [drm:intel_crt_detect] [CONNECTOR:14:VGA-1] force=1 [ 158.624076] [drm:intel_crt_detect] CRT not detected via hotplug [ 158.628750] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 158.628755] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 158.628757] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 158.628759] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 158.629031] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 158.629033] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 158.629035] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 158.630041] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:17:HDMI-A-1] [ 158.630045] [drm:intel_sdvo_detect] [CONNECTOR:17:HDMI-A-1] [ 158.630049] [drm:intel_sdvo_debug_write] SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS) [ 158.634742] [drm:intel_sdvo_read_response] SDVOB: R: (Success) 00 00 [ 158.634747] [drm:intel_sdvo_detect] SDVO response 0 0 [1] [ 158.634751] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:17:HDMI-A-1] disconnected [ 159.556071] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 159.556908] ata3.00: unexpected _GTF length (8) [ 159.557955] ata3.00: unexpected _GTF length (8) [ 159.558164] ata3.00: configured for UDMA/100 [ 160.293439] wlan0: authenticate with 00:04:ed:d6:76:40 [ 160.302970] wlan0: send auth to 00:04:ed:d6:76:40 (try 1/3) [ 160.305108] wlan0: authenticated [ 160.308086] wlan0: associate with 00:04:ed:d6:76:40 (try 1/3) [ 160.323049] wlan0: RX AssocResp from 00:04:ed:d6:76:40 (capab=0x411 status=0 aid=11) [ 160.337896] wlan0: associated [ 186.162751] [drm:intel_crtc_cursor_set] cursor off [ 323.050569] [drm:i915_gem_open] [ 404.400301] systemd-hostnamed[3741]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 462.148359] [drm:intel_crtc_cursor_set] cursor off [ 636.242880] [drm:intel_crtc_cursor_set] cursor off [ 713.506250] [drm:intel_crtc_cursor_set] cursor off [ 732.988380] [drm:intel_crtc_cursor_set] cursor off