[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.15.1 (root@cbdev) (gcc version 4.8.3 (Gentoo 4.8.3 p1.1, pie-0.5.9) ) #7 SMP Tue Jun 17 09:21:39 CEST 2014 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.15.1 root=/dev/sda2 ro init=/usr/lib/systemd/systemd drm.debug=0xe [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bab7efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bab7f000-0x00000000bbe7efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bbe7f000-0x00000000bbf7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bbf7f000-0x00000000bbffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bbfff000-0x00000000bbffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bc000000-0x00000000bf1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043edfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Hewlett-Packard HP EliteBook 840 G1/198F, BIOS L71 Ver. 01.11 04/29/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x43ee00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00FF800000 mask 7FFF800000 write-protect [ 0.000000] 1 base 0000000000 mask 7F80000000 write-back [ 0.000000] 2 base 0080000000 mask 7FC0000000 write-back [ 0.000000] 3 base 00BE000000 mask 7FFE000000 uncachable [ 0.000000] 4 base 00BD000000 mask 7FFF000000 uncachable [ 0.000000] 5 base 0100000000 mask 7F00000000 write-back [ 0.000000] 6 base 0200000000 mask 7E00000000 write-back [ 0.000000] 7 base 0400000000 mask 7FC0000000 write-back [ 0.000000] 8 base 043F000000 mask 7FFF000000 uncachable [ 0.000000] 9 base 043EE00000 mask 7FFFE00000 uncachable [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xbc000 max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01b6a000, 0x01b6afff] PGTABLE [ 0.000000] BRK [0x01b6b000, 0x01b6bfff] PGTABLE [ 0.000000] BRK [0x01b6c000, 0x01b6cfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x43ec00000-0x43edfffff] [ 0.000000] [mem 0x43ec00000-0x43edfffff] page 2M [ 0.000000] BRK [0x01b6d000, 0x01b6dfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x43c000000-0x43ebfffff] [ 0.000000] [mem 0x43c000000-0x43ebfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x400000000-0x43bffffff] [ 0.000000] [mem 0x400000000-0x43bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbab7efff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G [ 0.000000] [mem 0x80000000-0xba9fffff] page 2M [ 0.000000] [mem 0xbaa00000-0xbab7efff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbbfff000-0xbbffffff] [ 0.000000] [mem 0xbbfff000-0xbbffffff] page 4k [ 0.000000] BRK [0x01b6e000, 0x01b6efff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff] [ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G [ 0.000000] ACPI: RSDP 0x00000000000F2FE0 000024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 0x00000000BBFFE120 00009C (v01 HPQOEM SLIC-MPC 00000001 01000013) [ 0.000000] ACPI: FACP 0x00000000BBFFC000 00010C (v05 HPQOEM 198F 00000001 HP 00000001) [ 0.000000] ACPI: DSDT 0x00000000BBFD1000 0253E9 (v02 HPQOEM 198F 00000001 INTL 20110112) [ 0.000000] ACPI: FACS 0x00000000BBDE4000 000040 [ 0.000000] ACPI: HPET 0x00000000BBFFB000 000038 (v01 HPQOEM 198F 00000001 HP 00000001) [ 0.000000] ACPI: APIC 0x00000000BBFFA000 0000BC (v01 HPQOEM 198F 00000001 HP 00000001) [ 0.000000] ACPI: MCFG 0x00000000BBFF9000 00003C (v01 HPQOEM 198F 00000001 HP 00000001) [ 0.000000] ACPI: TCPA 0x00000000BBFF7000 000032 (v02 HPQOEM 198F 00000000 HP 00000001) [ 0.000000] ACPI: SSDT 0x00000000BBFCE000 000313 (v01 HPQOEM SataAhci 00001000 INTL 20110112) [ 0.000000] ACPI: SSDT 0x00000000BBFCD000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112) [ 0.000000] ACPI: FPDT 0x00000000BBFCB000 000044 (v01 HPQOEM 198F 00000001 HP 00000001) [ 0.000000] ACPI: BGRT 0x00000000BBFCA000 000038 (v00 HPQOEM 198F 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 0x00000000BBFC6000 000544 (v01 PmRef Cpu0Ist 00003000 INTL 20110112) [ 0.000000] ACPI: SSDT 0x00000000BBFC5000 000AF3 (v01 PmRef CpuPm 00003000 INTL 20110112) [ 0.000000] ACPI: SSDT 0x00000000BBFC4000 0001D5 (v01 PmRef LakeTiny 00003000 INTL 20110112) [ 0.000000] ACPI: SSDT 0x00000000BBFC3000 000706 (v01 SaSsdt SaSsdt 00003000 INTL 20110112) [ 0.000000] ACPI: ASF! 0x00000000BBFF8000 0000A5 (v32 HPQOEM 198F 00000001 HP 00000001) [ 0.000000] ACPI: DMAR 0x00000000BBFC2000 0000B0 (v01 INTEL HSW 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042e400000-ffff88043e3fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x43edfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0xbab7efff] [ 0.000000] node 0: [mem 0xbbfff000-0xbbffffff] [ 0.000000] node 0: [mem 0x100000000-0x43edfffff] [ 0.000000] On node 0 totalpages: 4167964 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11886 pages used for memmap [ 0.000000] DMA32 zone: 760704 pages, LIFO batch:31 [ 0.000000] Normal zone: 53176 pages used for memmap [ 0.000000] Normal zone: 3403264 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0xbd200000-0xbf1fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 56 [ 0.000000] e820: [mem 0xbf200000-0xdfffffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88043ea00000 s75328 r8192 d22976 u262144 [ 0.000000] pcpu-alloc: s75328 r8192 d22976 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4102817 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.15.1 root=/dev/sda2 ro init=/usr/lib/systemd/systemd drm.debug=0xe [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Memory: 16306292K/16671856K available (7304K kernel code, 564K rwdata, 2280K rodata, 812K init, 680K bss, 365564K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS:4352 nr_irqs:1016 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2693.764 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5387.52 BogoMIPS (lpj=2693764) [ 0.000162] pid_max: default: 32768 minimum: 301 [ 0.000244] ACPI: Core revision 20140214 [ 0.012931] ACPI: All ACPI Tables successfully acquired [ 0.028169] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.028254] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.028564] Initializing cgroup subsys freezer [ 0.028660] CPU: Physical Processor ID: 0 [ 0.028737] CPU: Processor Core ID: 0 [ 0.028816] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.030002] mce: CPU supports 7 MCE banks [ 0.030090] CPU0: Thermal monitoring enabled (TM1) [ 0.030178] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 tlb_flushall_shift: 6 [ 0.030463] Freeing SMP alternatives memory: 24K (ffffffff81ab9000 - ffffffff81abf000) [ 0.030687] dmar: Host address width 39 [ 0.030794] dmar: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.030909] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a [ 0.031087] dmar: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.031201] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da [ 0.031378] dmar: RMRR base: 0x000000bbd18000 end: 0x000000bbd37fff [ 0.031498] dmar: RMRR base: 0x000000bd000000 end: 0x000000bf1fffff [ 0.031732] IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1 [ 0.031843] HPET id 0 under DRHD base 0xfed91000 [ 0.032118] Enabled IRQ remapping in xapic mode [ 0.032850] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.042960] smpboot: CPU0: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz (fam: 06, model: 45, stepping: 01) [ 0.043256] TSC deadline timer enabled [ 0.043262] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver. [ 0.043635] ... version: 3 [ 0.043743] ... bit width: 48 [ 0.043850] ... generic registers: 4 [ 0.043957] ... value mask: 0000ffffffffffff [ 0.044067] ... max period: 0000ffffffffffff [ 0.044177] ... fixed-purpose events: 3 [ 0.044287] ... event mask: 000000070000000f [ 0.044575] x86: Booting SMP configuration: [ 0.044683] .... node #0, CPUs: #1 #2 #3 [ 0.087965] x86: Booted up 1 node, 4 CPUs [ 0.088174] smpboot: Total of 4 processors activated (21550.11 BogoMIPS) [ 0.092584] devtmpfs: initialized [ 0.092852] PM: Registering ACPI NVS region [mem 0xbbe7f000-0xbbf7efff] (1048576 bytes) [ 0.093095] pinctrl core: initialized pinctrl subsystem [ 0.093241] NET: Registered protocol family 16 [ 0.093409] cpuidle: using governor ladder [ 0.093520] cpuidle: using governor menu [ 0.093646] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.093823] ACPI: bus type PCI registered [ 0.093971] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.094152] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.119008] PCI: Using configuration type 1 for base access [ 0.120671] ACPI: Added _OSI(Module Device) [ 0.120779] ACPI: Added _OSI(Processor Device) [ 0.120888] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.122874] ACPI: Added _OSI(Processor Aggregator Device) [ 0.135927] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.152039] ACPI: SSDT 0x00000000BBDE2918 0003F3 (v01 PmRef Cpu0Cst 00003001 INTL 20110112) [ 0.152769] ACPI: Dynamic OEM Table Load: [ 0.152955] ACPI: SSDT 0x0000000000000000 0003F3 (v01 PmRef Cpu0Cst 00003001 INTL 20110112) [ 0.156177] ACPI: SSDT 0x00000000BBDE3698 0005DB (v01 PmRef ApIst 00003000 INTL 20110112) [ 0.157074] ACPI: Dynamic OEM Table Load: [ 0.157257] ACPI: SSDT 0x0000000000000000 0005DB (v01 PmRef ApIst 00003000 INTL 20110112) [ 0.160055] ACPI: SSDT 0x00000000BBDE1D98 000119 (v01 PmRef ApCst 00003000 INTL 20110112) [ 0.160786] ACPI: Dynamic OEM Table Load: [ 0.160969] ACPI: SSDT 0x0000000000000000 000119 (v01 PmRef ApCst 00003000 INTL 20110112) [ 1.658363] ACPI: Interpreter enabled [ 1.658478] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580) [ 1.658737] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580) [ 1.659001] ACPI: (supports S0 S3 S5) [ 1.659110] ACPI: Using IOAPIC for interrupt routing [ 1.659241] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.660475] ACPI: Power Resource [APPR] (off) [ 1.665593] ACPI: Power Resource [COMP] (on) [ 1.665849] ACPI: Power Resource [LPP] (on) [ 1.666879] ACPI: Power Resource [PXP6] (on) [ 1.779125] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.779241] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 1.780786] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 1.781438] PCI host bridge to bus 0000:00 [ 1.781547] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.781659] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 1.781772] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 1.781885] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 1.781999] pci_bus 0000:00: root bus resource [mem 0xbf200000-0xdfffffff] [ 1.782113] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed3ffff] [ 1.782227] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xfedfffff] [ 1.782341] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff] [ 1.782462] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000 [ 1.782562] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000 [ 1.782574] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit] [ 1.782581] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 1.782586] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 1.782677] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300 [ 1.782685] pci 0000:00:03.0: reg 0x10: [mem 0xd0730000-0xd0733fff 64bit] [ 1.782800] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330 [ 1.782815] pci 0000:00:14.0: reg 0x10: [mem 0xd0720000-0xd072ffff 64bit] [ 1.782862] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 1.782914] pci 0000:00:14.0: System wakeup disabled by ACPI [ 1.783057] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000 [ 1.783077] pci 0000:00:16.0: reg 0x10: [mem 0xd0739000-0xd073901f 64bit] [ 1.783143] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 1.783224] pci 0000:00:16.3: [8086:9c3d] type 00 class 0x070002 [ 1.783240] pci 0000:00:16.3: reg 0x10: [io 0x30b0-0x30b7] [ 1.783248] pci 0000:00:16.3: reg 0x14: [mem 0xd073f000-0xd073ffff] [ 1.783389] pci 0000:00:19.0: [8086:155a] type 00 class 0x020000 [ 1.783404] pci 0000:00:19.0: reg 0x10: [mem 0xd0700000-0xd071ffff] [ 1.783411] pci 0000:00:19.0: reg 0x14: [mem 0xd073e000-0xd073efff] [ 1.783419] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f] [ 1.783475] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 1.783527] pci 0000:00:19.0: System wakeup disabled by ACPI [ 1.783670] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300 [ 1.783682] pci 0000:00:1b.0: reg 0x10: [mem 0xd0734000-0xd0737fff 64bit] [ 1.783745] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.783822] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400 [ 1.783883] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.783963] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400 [ 1.784025] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 1.784077] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 1.784217] pci 0000:00:1c.5: [8086:9c1a] type 01 class 0x060400 [ 1.784286] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 1.784374] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320 [ 1.784393] pci 0000:00:1d.0: reg 0x10: [mem 0xd073d000-0xd073d3ff] [ 1.784481] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 1.784535] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 1.784680] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100 [ 1.784859] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601 [ 1.784874] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af] [ 1.784880] pci 0000:00:1f.2: reg 0x14: [io 0x30bc-0x30bf] [ 1.784887] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7] [ 1.784893] pci 0000:00:1f.2: reg 0x1c: [io 0x30b8-0x30bb] [ 1.784900] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 1.784906] pci 0000:00:1f.2: reg 0x24: [mem 0xd073c000-0xd073c7ff] [ 1.784940] pci 0000:00:1f.2: PME# supported from D3hot [ 1.785013] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500 [ 1.785026] pci 0000:00:1f.3: reg 0x10: [mem 0xd0738000-0xd07380ff 64bit] [ 1.785044] pci 0000:00:1f.3: reg 0x20: [io 0xef80-0xef9f] [ 1.785165] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 1.785279] pci 0000:00:1c.0: bridge window [mem 0xd0600000-0xd06fffff] [ 1.785348] pci 0000:02:00.0: [8086:08b1] type 00 class 0x028000 [ 1.785381] pci 0000:02:00.0: reg 0x10: [mem 0xd0500000-0xd0501fff 64bit] [ 1.785567] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 1.785597] pci 0000:02:00.0: System wakeup disabled by ACPI [ 1.787478] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 1.787591] pci 0000:00:1c.3: bridge window [mem 0xd0500000-0xd05fffff] [ 1.787638] pci 0000:00:1c.5: PCI bridge to [bus 03] [ 1.787751] pci 0000:00:1c.5: bridge window [mem 0xd0400000-0xd04fffff] [ 1.787771] pci_bus 0000:00: on NUMA node 0 [ 1.787772] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported) [ 1.788504] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15) [ 1.789068] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 1.789630] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15) [ 1.790190] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 1.790751] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15) [ 1.791310] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.792009] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15) [ 1.792569] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.793427] ACPI: Enabled 5 GPEs in block 00 to 7F [ 1.793654] ACPI : EC: GPE = 0x6, I/O: command/status = 0x66, data = 0x62 [ 1.793813] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 1.793993] vgaarb: loaded [ 1.794098] vgaarb: bridge control possible 0000:00:02.0 [ 1.794260] SCSI subsystem initialized [ 1.794373] libata version 3.00 loaded. [ 1.794377] ACPI: bus type USB registered [ 1.794499] usbcore: registered new interface driver usbfs [ 1.794619] usbcore: registered new interface driver hub [ 1.794768] usbcore: registered new device driver usb [ 1.794899] Linux video capture interface: v2.00 [ 1.795013] pps_core: LinuxPPS API ver. 1 registered [ 1.795122] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.795303] PTP clock support registered [ 1.795647] wmi: Mapper loaded [ 1.795762] Advanced Linux Sound Architecture Driver Initialized. [ 1.795874] PCI: Using ACPI for IRQ routing [ 1.801343] PCI: pci_cache_line_size set to 64 bytes [ 1.801380] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff] [ 1.801381] e820: reserve RAM buffer [mem 0xbab7f000-0xbbffffff] [ 1.801383] e820: reserve RAM buffer [mem 0x43ee00000-0x43fffffff] [ 1.801527] cfg80211: Calling CRDA to update world regulatory domain [ 1.801696] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 1.802149] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 1.804279] Switched to clocksource hpet [ 1.804433] pnp: PnP ACPI init [ 1.804544] ACPI: bus type PNP registered [ 1.804816] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.804934] system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved [ 1.805048] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 1.805162] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 1.805283] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 1.805397] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.805511] system 00:00: [mem 0xfed90000-0xfed93fff] could not be reserved [ 1.805625] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved [ 1.805739] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.805853] system 00:00: [mem 0xbf210000-0xbf21ffff] has been reserved [ 1.805968] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.806046] pnp 00:01: [dma 4] [ 1.806063] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 1.806082] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 1.806168] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 1.806204] system 00:04: [io 0x0200-0x027f] has been reserved [ 1.806322] system 00:04: [io 0xffff] has been reserved [ 1.806433] system 00:04: [io 0xffff] has been reserved [ 1.806544] system 00:04: [io 0xffff] has been reserved [ 1.806655] system 00:04: [io 0x1800-0x18fe] could not be reserved [ 1.806768] system 00:04: [io 0xef80-0xef9f] has been reserved [ 1.806881] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.806925] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.807076] pnp 00:06: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active) [ 1.807101] pnp 00:07: Plug and Play ACPI device, IDs SYN3003 SYN0100 SYN0002 PNP0f13 (active) [ 1.807292] pnp 00:08: Plug and Play ACPI device, IDs HPQ6007 (active) [ 1.807361] system 00:09: [mem 0x20000000-0x201fffff] could not be reserved [ 1.807476] system 00:09: [mem 0x40004000-0x40004fff] could not be reserved [ 1.807591] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.807804] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 1.807816] pnp: PnP ACPI: found 11 devices [ 1.807924] ACPI: bus type PNP unregistered [ 1.813976] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 1.813979] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 [ 1.813983] pci 0000:00:1c.5: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 1.813985] pci 0000:00:1c.5: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 1.813991] pci 0000:00:1c.5: BAR 9: assigned [mem 0xbf300000-0xbf4fffff 64bit pref] [ 1.814170] pci 0000:00:1c.5: BAR 7: assigned [io 0x2000-0x2fff] [ 1.814286] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 1.814399] pci 0000:00:1c.0: bridge window [mem 0xd0600000-0xd06fffff] [ 1.814518] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 1.814631] pci 0000:00:1c.3: bridge window [mem 0xd0500000-0xd05fffff] [ 1.814750] pci 0000:00:1c.5: PCI bridge to [bus 03] [ 1.814860] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] [ 1.814976] pci 0000:00:1c.5: bridge window [mem 0xd0400000-0xd04fffff] [ 1.815092] pci 0000:00:1c.5: bridge window [mem 0xbf300000-0xbf4fffff 64bit pref] [ 1.815276] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.815278] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 1.815280] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 1.815281] pci_bus 0000:00: resource 7 [mem 0xbf200000-0xdfffffff] [ 1.815282] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfed3ffff] [ 1.815284] pci_bus 0000:00: resource 9 [mem 0xfed45000-0xfedfffff] [ 1.815285] pci_bus 0000:00: resource 10 [mem 0xfee01000-0xffffffff] [ 1.815287] pci_bus 0000:01: resource 1 [mem 0xd0600000-0xd06fffff] [ 1.815289] pci_bus 0000:02: resource 1 [mem 0xd0500000-0xd05fffff] [ 1.815290] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] [ 1.815291] pci_bus 0000:03: resource 1 [mem 0xd0400000-0xd04fffff] [ 1.815293] pci_bus 0000:03: resource 2 [mem 0xbf300000-0xbf4fffff 64bit pref] [ 1.815312] NET: Registered protocol family 2 [ 1.815509] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.815847] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.816080] TCP: Hash tables configured (established 131072 bind 65536) [ 1.816207] TCP: reno registered [ 1.816320] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 1.816467] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 1.816646] NET: Registered protocol family 1 [ 1.816763] pci 0000:00:02.0: Boot video device [ 1.816770] pci 0000:00:14.0: enabling device (0000 -> 0002) [ 1.817231] PCI: CLS 64 bytes, default 64 [ 1.817248] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.817367] software IO TLB [mem 0xb6b7f000-0xbab7f000] (64MB) mapped at [ffff8800b6b7f000-ffff8800bab7efff] [ 1.817689] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer [ 1.817901] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x17 [ 1.818018] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x17 [ 1.818134] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x17 [ 1.818251] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x17 [ 1.818400] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 1.819111] AVX2 version of gcm_enc/dec engaged. [ 1.819599] sha1_ssse3: Using AVX2 optimized SHA-1 implementation [ 1.819755] sha256_ssse3: Using AVX2 optimized SHA-256 implementation [ 1.819911] sha512_ssse3: Using AVX2 optimized SHA-512 implementation [ 1.821301] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 1.821437] audit: initializing netlink subsys (disabled) [ 1.821555] audit: type=2000 audit(1403100552.793:1): initialized [ 1.821777] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.823508] fuse init (API version 7.23) [ 1.823675] msgmni has been set to 31848 [ 1.824180] NET: Registered protocol family 38 [ 1.824324] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.824500] io scheduler noop registered [ 1.824607] io scheduler deadline registered (default) [ 1.824861] pcieport 0000:00:1c.0: irq 58 for MSI/MSI-X [ 1.824999] pcieport 0000:00:1c.3: irq 59 for MSI/MSI-X [ 1.825136] pcieport 0000:00:1c.5: irq 60 for MSI/MSI-X [ 1.825215] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 1.825341] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 1.825352] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt [ 1.825466] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 1.825581] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded [ 1.825592] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt [ 1.825708] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded [ 1.825712] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.825839] intel_idle: MWAIT substates: 0x11142120 [ 1.825840] intel_idle: v0.4 model 0x45 [ 1.825841] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.826188] ACPI: AC Adapter [AC] (on-line) [ 1.826473] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 1.826654] ACPI: Sleep Button [SLPB] [ 1.826791] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 1.826985] ACPI: Lid Switch [LID] [ 1.827120] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.827307] ACPI: Power Button [PWRF] [ 1.851531] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.851647] ACPI: Thermal Zone [CPUZ] (51 C) [ 1.875787] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.875902] ACPI: Thermal Zone [GFXZ] (0 C) [ 1.890919] thermal LNXTHERM:02: registered as thermal_zone2 [ 1.891035] ACPI: Thermal Zone [EXTZ] (40 C) [ 1.906083] thermal LNXTHERM:03: registered as thermal_zone3 [ 1.906199] ACPI: Thermal Zone [LOCZ] (42 C) [ 1.923313] thermal LNXTHERM:04: registered as thermal_zone4 [ 1.923429] ACPI: Thermal Zone [BATZ] (37 C) [ 1.923811] thermal LNXTHERM:05: registered as thermal_zone5 [ 1.923923] ACPI: Thermal Zone [PCHZ] (114 C) [ 1.924092] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.943672] ACPI: Battery Slot [BAT0] (battery present) [ 1.943858] ACPI: Battery Slot [BAT1] (battery absent) [ 1.945239] 0000:00:16.3: ttyS0 at I/O 0x30b0 (irq = 19, base_baud = 115200) is a 16550A [ 1.945666] Non-volatile memory driver v1.3 [ 1.945797] Linux agpgart interface v0.103 [ 1.945934] [drm] Initialized drm 1.1.0 20060810 [ 1.946213] [drm:i915_dump_device_info] i915 device info: gen=7, pciid=0x0a16 flags=is_mobile,need_gfx_hws,is_haswell,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg, [ 1.946399] [drm:intel_detect_pch] Found LynxPoint LP PCH [ 1.946638] [drm] Memory usable by graphics device = 2048M [ 1.946749] [drm:i915_gem_gtt_init] GMADR size = 256M [ 1.946750] [drm:i915_gem_gtt_init] GTT stolen size = 32M [ 1.946751] [drm:i915_gem_gtt_init] ppgtt mode: 1 [ 1.969084] [drm:intel_opregion_setup] graphic opregion physical addr: 0xbbf74018 [ 1.969090] [drm:intel_opregion_setup] Public ACPI methods supported [ 1.969091] [drm:intel_opregion_setup] SWSCI supported [ 1.974271] [drm:swsci_setup] SWSCI BIOS requested (00200081) SBCB callbacks that are not supported (00200101) [ 1.974275] [drm:swsci_setup] SWSCI GBDA callbacks 000000b3, SBCB callbacks 00200081 [ 1.974276] [drm:intel_opregion_setup] ASLE supported [ 1.974368] i915 0000:00:02.0: irq 61 for MSI/MSI-X [ 1.974375] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.974491] [drm] Driver supports precise vblank timestamp query. [ 1.974604] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz [ 1.974606] [drm:intel_parse_bios] Using VBT from OpRegion: $VBT HASWELL d [ 1.974608] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 1.974609] [drm:parse_general_definitions] crt_ddc_bus_pin: 0 [ 1.974613] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [ 1.974615] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 0 141000 1920 1936 1952 2104 1080 1083 1097 1116 0x8 0xa [ 1.974617] [drm:parse_lfp_panel_data] VBT initial LVDS value 30033c [ 1.974619] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255 [ 1.974621] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables: [ 1.974623] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 1.974624] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT [ 1.974627] [drm:parse_mipi] No MIPI BDB found [ 1.974629] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 [ 1.974630] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0 [ 1.974631] [drm:parse_ddi_port] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.974633] [drm:parse_ddi_port] VBT HDMI level shift for port B: 0 [ 1.974634] [drm:parse_ddi_port] Port C VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.974635] [drm:parse_ddi_port] VBT HDMI level shift for port C: 0 [ 1.974672] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 1.974678] [drm:i915_gem_init_stolen] found 33554432 bytes of stolen memory at bd200000 [ 1.974680] [drm:intel_display_power_get] enabling always-on [ 1.974682] [drm:intel_display_power_get] enabling display [ 1.974685] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.974899] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec) [ 1.974900] [drm:intel_print_wm_latency] Primary WM1 latency 4 (2.0 usec) [ 1.974901] [drm:intel_print_wm_latency] Primary WM2 latency 36 (18.0 usec) [ 1.974903] [drm:intel_print_wm_latency] Primary WM3 latency 90 (45.0 usec) [ 1.974904] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec) [ 1.974905] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec) [ 1.974907] [drm:intel_print_wm_latency] Sprite WM1 latency 4 (2.0 usec) [ 1.974908] [drm:intel_print_wm_latency] Sprite WM2 latency 36 (18.0 usec) [ 1.974909] [drm:intel_print_wm_latency] Sprite WM3 latency 90 (45.0 usec) [ 1.974910] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec) [ 1.974911] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec) [ 1.974912] [drm:intel_print_wm_latency] Cursor WM1 latency 4 (2.0 usec) [ 1.974914] [drm:intel_print_wm_latency] Cursor WM2 latency 36 (18.0 usec) [ 1.974915] [drm:intel_print_wm_latency] Cursor WM3 latency 90 (45.0 usec) [ 1.974916] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec) [ 1.974918] [drm:intel_modeset_init] 3 display pipes available. [ 1.974932] [drm:intel_ddi_pll_init] CDCLK running at 450000KHz [ 1.975237] [drm:intel_dp_init_connector] Adding eDP connector on port A [ 1.975269] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000 [ 1.975271] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 1.975272] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600 [ 1.975274] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200 [ 1.975275] [drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1 [ 1.975308] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 1.975314] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 1.975598] [drm:intel_dp_get_dpcd] DPCD: 11 0a 82 41 00 00 01 80 02 00 00 00 0f 0b 00 [ 1.975756] [drm:intel_dp_get_dpcd] Detected EDP PSR Panel. [ 1.975765] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 [ 1.995827] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.995855] [drm:intel_panel_setup_backlight] backlight initialized, enabled, brightness 937/937, sysfs interface registered [ 1.995863] [drm:intel_dp_init_connector] Adding DP connector on port B [ 1.995889] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1 [ 1.995943] [drm:intel_dp_init_connector] Adding DP connector on port C [ 1.995962] [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-2 [ 2.001220] [drm:intel_modeset_readout_hw_state] [CRTC:5] hw state readout: enabled [ 2.001224] [drm:intel_modeset_readout_hw_state] [CRTC:8] hw state readout: disabled [ 2.001226] [drm:intel_modeset_readout_hw_state] [CRTC:11] hw state readout: disabled [ 2.001229] [drm:intel_ddi_get_crtc_pll] Pipe A connected to port A using clock 0x20000000 [ 2.001234] [drm:intel_modeset_readout_hw_state] [ENCODER:13:TMDS-13] hw state readout: enabled, pipe A [ 2.001237] [drm:intel_modeset_readout_hw_state] [ENCODER:22:TMDS-22] hw state readout: disabled, pipe A [ 2.001239] [drm:intel_modeset_readout_hw_state] [ENCODER:25:TMDS-25] hw state readout: disabled, pipe A [ 2.001242] [drm:intel_modeset_readout_hw_state] [CONNECTOR:14:eDP-1] hw state readout: enabled [ 2.001245] [drm:intel_modeset_readout_hw_state] [CONNECTOR:23:DP-1] hw state readout: disabled [ 2.001247] [drm:intel_modeset_readout_hw_state] [CONNECTOR:24:HDMI-A-1] hw state readout: disabled [ 2.001250] [drm:intel_modeset_readout_hw_state] [CONNECTOR:26:DP-2] hw state readout: disabled [ 2.001252] [drm:intel_modeset_readout_hw_state] [CONNECTOR:27:HDMI-A-2] hw state readout: disabled [ 2.001256] [drm:intel_dump_pipe_config] [CRTC:5][setup_hw_state] config for pipe A [ 2.001257] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 2.001259] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 0 [ 2.001262] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 2.001264] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4928307, gmch_n: 8388608, link_m: 273794, link_n: 524288, tu: 64 [ 2.001266] [drm:intel_dump_pipe_config] requested mode: [ 2.001269] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 720 0 0 0 400 0 0 0 0x0 0x0 [ 2.001271] [drm:intel_dump_pipe_config] adjusted mode: [ 2.001274] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x5 [ 2.001277] [drm:intel_dump_crtc_timings] crtc timings: 140999 1920 1936 1952 2104 1080 1083 1097 1116, type: 0x0 flags: 0x5 [ 2.001279] [drm:intel_dump_pipe_config] port clock: 270000 [ 2.001280] [drm:intel_dump_pipe_config] pipe src size: 720x400 [ 2.001282] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 2.001284] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x07800438, enabled [ 2.001286] [drm:intel_dump_pipe_config] ips: 0 [ 2.001288] [drm:intel_dump_pipe_config] double wide: 0 [ 2.001290] [drm:intel_dump_pipe_config] [CRTC:8][setup_hw_state] config for pipe B [ 2.001292] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 2.001293] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 2.001296] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 2.001298] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 2.001299] [drm:intel_dump_pipe_config] requested mode: [ 2.001302] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.001304] [drm:intel_dump_pipe_config] adjusted mode: [ 2.001307] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.001309] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 2.001311] [drm:intel_dump_pipe_config] port clock: 0 [ 2.001313] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 2.001314] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 2.001316] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 2.001318] [drm:intel_dump_pipe_config] ips: 0 [ 2.001319] [drm:intel_dump_pipe_config] double wide: 0 [ 2.001322] [drm:intel_dump_pipe_config] [CRTC:11][setup_hw_state] config for pipe C [ 2.001323] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 2.001325] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 2.001327] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 2.001329] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 2.001331] [drm:intel_dump_pipe_config] requested mode: [ 2.001334] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.001335] [drm:intel_dump_pipe_config] adjusted mode: [ 2.001338] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.001341] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 2.001342] [drm:intel_dump_pipe_config] port clock: 0 [ 2.001344] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 2.001346] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 2.001347] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 2.001349] [drm:intel_dump_pipe_config] ips: 0 [ 2.001350] [drm:intel_dump_pipe_config] double wide: 0 [ 2.001356] [drm:intel_connector_check_state] [CONNECTOR:14:eDP-1] [ 2.001360] [drm:check_encoder_state] [ENCODER:13:TMDS-13] [ 2.001363] [drm:check_encoder_state] [ENCODER:22:TMDS-22] [ 2.001365] [drm:check_encoder_state] [ENCODER:25:TMDS-25] [ 2.001367] [drm:check_crtc_state] [CRTC:5] [ 2.001374] [drm:check_crtc_state] [CRTC:8] [ 2.001376] [drm:check_crtc_state] [CRTC:11] [ 2.001382] [drm:ironlake_get_plane_config] pipe/plane 0/0 with fb: size=720x400@32, offset=0, pitch 2560, size 0xfa000 [ 2.001385] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=fa000 [ 2.001389] [drm:i915_pages_create_for_stolen] offset=0x0, size=1024000 [ 2.001393] [drm:intel_alloc_plane_obj] plane fb obj ffff88042bff0000 [ 2.001395] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + fa000 [ 2.001397] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [fa000, 7ffff000] [ 2.004536] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 110 [ 2.004539] [drm:i915_gem_context_init] HW context support initialized [ 2.004551] [drm:init_status_page] render ring hws offset: 0x00310000 [ 2.006225] [drm:init_pipe_control] render ring pipe control offset: 0x00331000 [ 2.006232] [drm:init_status_page] bsd ring hws offset: 0x00332000 [ 2.006302] [drm:init_status_page] blitter ring hws offset: 0x00353000 [ 2.006368] [drm:init_status_page] video enhancement ring hws offset: 0x00374000 [ 2.006549] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:eDP-1] [ 2.006552] [drm:intel_dp_detect] [CONNECTOR:14:eDP-1] [ 2.006719] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 2.006882] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 2.006889] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 2.006894] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:eDP-1] probed modes : [ 2.006897] [drm:drm_mode_debug_printmodeline] Modeline 15:"1920x1080" 60 141000 1920 1936 1952 2104 1080 1083 1097 1116 0x48 0xa [ 2.006901] [drm:drm_mode_debug_printmodeline] Modeline 16:"1920x1080" 40 94000 1920 1936 1952 2104 1080 1083 1097 1116 0x40 0xa [ 2.006903] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:DP-1] [ 2.006905] [drm:intel_dp_detect] [CONNECTOR:23:DP-1] [ 2.007198] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 01 00 15 01 83 02 00 00 00 00 00 04 [ 2.007200] [drm:intel_dp_get_dpcd] Displayport TPS3 supported [ 2.007891] [drm:intel_dp_probe_oui] Sink OUI: 000000 [ 2.008082] [drm:intel_dp_probe_oui] Branch OUI: 90cc24 [ 2.052260] [drm:drm_detect_monitor_audio] Monitor has basic audio support [ 2.096489] [drm:drm_edid_to_eld] ELD monitor DELL U2414H [ 2.096492] [drm:drm_edid_to_eld] ELD size 9, SAD count 1 [ 2.096502] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:DP-1] probed modes : [ 2.096506] [drm:drm_mode_debug_printmodeline] Modeline 30:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 2.096509] [drm:drm_mode_debug_printmodeline] Modeline 31:"3840x1080" 60 278100 3840 3884 3972 4120 1080 1084 1089 1125 0x40 0x5 [ 2.096512] [drm:drm_mode_debug_printmodeline] Modeline 32:"2560x1024" 60 189830 2560 2608 2720 2968 1024 1025 1028 1066 0x40 0x5 [ 2.096515] [drm:drm_mode_debug_printmodeline] Modeline 45:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 2.096519] [drm:drm_mode_debug_printmodeline] Modeline 36:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 2.096522] [drm:drm_mode_debug_printmodeline] Modeline 35:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x0 0x6 [ 2.096525] [drm:drm_mode_debug_printmodeline] Modeline 41:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 2.096529] [drm:drm_mode_debug_printmodeline] Modeline 34:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 2.096532] [drm:drm_mode_debug_printmodeline] Modeline 33:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 2.096535] [drm:drm_mode_debug_printmodeline] Modeline 42:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 2.096539] [drm:drm_mode_debug_printmodeline] Modeline 43:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 2.096542] [drm:drm_mode_debug_printmodeline] Modeline 44:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 2.096545] [drm:drm_mode_debug_printmodeline] Modeline 37:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 2.096548] [drm:drm_mode_debug_printmodeline] Modeline 38:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 2.096551] [drm:drm_mode_debug_printmodeline] Modeline 39:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 2.096555] [drm:drm_mode_debug_printmodeline] Modeline 46:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 2.096558] [drm:drm_mode_debug_printmodeline] Modeline 40:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 2.096560] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:24:HDMI-A-1] [ 2.096562] [drm:intel_hdmi_detect] [CONNECTOR:24:HDMI-A-1] [ 2.096722] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 2.096724] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 2.096726] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:24:HDMI-A-1] disconnected [ 2.096729] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:26:DP-2] [ 2.096731] [drm:intel_dp_detect] [CONNECTOR:26:DP-2] [ 2.096734] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:26:DP-2] disconnected [ 2.096736] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:27:HDMI-A-2] [ 2.096738] [drm:intel_hdmi_detect] [CONNECTOR:27:HDMI-A-2] [ 2.096891] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 2.096893] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 2.096895] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:27:HDMI-A-2] disconnected [ 2.096897] [drm:drm_setup_crtcs] [ 2.096899] [drm:drm_enable_connectors] connector 14 enabled? yes [ 2.096901] [drm:drm_enable_connectors] connector 23 enabled? yes [ 2.096903] [drm:drm_enable_connectors] connector 24 enabled? no [ 2.096904] [drm:drm_enable_connectors] connector 26 enabled? no [ 2.096906] [drm:drm_enable_connectors] connector 27 enabled? no [ 2.096908] [drm:intel_fb_initial_config] looking for cmdline mode on connector 14 [ 2.096911] [drm:intel_fb_initial_config] looking for preferred mode on connector 14 [ 2.096913] [drm:intel_fb_initial_config] connector eDP-1 on crtc 5: 1920x1080 [ 2.096915] [drm:intel_fb_initial_config] connector 23 has no encoder or crtc, skipping [ 2.096916] [drm:intel_fb_initial_config] connector 24 not enabled, skipping [ 2.096918] [drm:intel_fb_initial_config] connector 26 not enabled, skipping [ 2.096920] [drm:intel_fb_initial_config] connector 27 not enabled, skipping [ 2.096921] [drm:intel_fb_initial_config] fallback: Not all outputs enabled [ 2.096923] [drm:intel_fb_initial_config] Enabled: 1, detected: 2 [ 2.096924] [drm:intel_fb_initial_config] Not using firmware configuration [ 2.096926] [drm:drm_target_preferred] looking for cmdline mode on connector 14 [ 2.096928] [drm:drm_target_preferred] looking for preferred mode on connector 14 [ 2.096930] [drm:drm_target_preferred] found mode 1920x1080 [ 2.096932] [drm:drm_target_preferred] looking for cmdline mode on connector 23 [ 2.096933] [drm:drm_target_preferred] looking for preferred mode on connector 23 [ 2.096935] [drm:drm_target_preferred] found mode 1920x1080 [ 2.096937] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config [ 2.096941] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 5 [ 2.096943] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 8 [ 2.096945] [drm:intelfb_create] no BIOS fb, allocating a new one [ 2.096947] [drm:i915_gem_object_create_stolen] creating stolen object: size=7e9000 [ 2.096950] [drm:i915_pages_create_for_stolen] offset=0xfa000, size=8294400 [ 2.098581] [drm:intelfb_create] allocated 1920x1080 fb: 0x00395000, bo ffff88042bff1080 [ 2.098638] fbcon: inteldrmfb (fb0) is primary device [ 2.099837] [drm:intel_crtc_cursor_set] cursor off [ 2.099840] [drm:intel_crtc_set_config] [CRTC:5] [FB:49] #connectors=1 (x y) (0 0) [ 2.099842] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set [ 2.099844] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.099847] [drm:drm_mode_debug_printmodeline] Modeline 47:"1920x1080" 60 141000 1920 1936 1952 2104 1080 1083 1097 1116 0x48 0xa [ 2.099848] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=1 [ 2.099850] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.099852] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 2.099854] [drm:connected_sink_compute_bpp] [CONNECTOR:14:eDP-1] checking for sink bpp constrains [ 2.099855] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18 [ 2.099858] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 141000KHz [ 2.099859] [drm:intel_dp_compute_config] using min 1 lanes per VBT [ 2.099860] [drm:intel_dp_compute_config] using min 0a link bw per VBT [ 2.099861] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 18 [ 2.099862] [drm:intel_dp_compute_config] DP link bw required 253800 available 432000 [ 2.099864] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1 [ 2.099865] [drm:intel_dump_pipe_config] [CRTC:5][modeset] config for pipe A [ 2.099866] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 2.099867] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 2.099868] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 2.099870] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4928307, gmch_n: 8388608, link_m: 273794, link_n: 524288, tu: 64 [ 2.099871] [drm:intel_dump_pipe_config] requested mode: [ 2.099873] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 141000 1920 1936 1952 2104 1080 1083 1097 1116 0x48 0xa [ 2.099874] [drm:intel_dump_pipe_config] adjusted mode: [ 2.099876] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 141000 1920 1936 1952 2104 1080 1083 1097 1116 0x48 0xa [ 2.099879] [drm:intel_dump_crtc_timings] crtc timings: 141000 1920 1936 1952 2104 1080 1083 1097 1116, type: 0x48 flags: 0xa [ 2.099880] [drm:intel_dump_pipe_config] port clock: 270000 [ 2.099881] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 2.099882] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 2.099883] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 2.099884] [drm:intel_dump_pipe_config] ips: 1 [ 2.099884] [drm:intel_dump_pipe_config] double wide: 0 [ 2.099890] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 2.099894] [drm:intel_edp_backlight_off] [ 2.103333] [drm:intel_edp_panel_off] Turn eDP power off [ 2.300108] [drm:wait_panel_off] Wait for panel power off time [ 2.300111] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 2.355086] [drm:wait_panel_status] Wait complete [ 2.355090] [drm:intel_update_fbc] no output, disabling [ 2.355093] [drm:intel_display_power_put] disabling display [ 2.355095] [drm:hsw_set_power_well] Requesting to disable the power well [ 2.355113] [drm:ironlake_update_primary_plane] Writing base 00395000 00000000 0 0 7680 [ 2.355116] [drm:intel_edp_psr_match_conditions] PSR disable by flag [ 2.355118] [drm:intel_crtc_mode_set] [ENCODER:13:TMDS-13] set [MODE:0:1920x1080] [ 2.355120] [drm:intel_ddi_mode_set] Preparing DDI mode on port A, pipe A [ 2.355122] [drm:intel_edp_panel_on] Turn eDP power on [ 2.355124] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 2.817936] tsc: Refined TSC clocksource calibration: 2693.764 MHz [ 2.900891] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000 [ 2.900893] [drm:wait_panel_status] Wait complete [ 2.900896] [drm:wait_panel_on] Wait for panel power on [ 2.900899] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003 [ 3.109814] [drm:wait_panel_status] Wait complete [ 3.109816] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 3.109822] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 3.110887] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 3.111339] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 3.111781] [drm:intel_dp_start_link_train] clock recovery OK [ 3.112534] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful [ 3.112813] [drm:intel_edp_backlight_on] [ 3.112816] [drm:intel_panel_enable_backlight] pipe A [ 3.112819] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 3.112824] [drm:intel_edp_psr_match_conditions] PSR disable by flag [ 3.146800] [drm:intel_update_fbc] framebuffer not tiled or fenced, disabling compression [ 3.146803] [drm:intel_connector_check_state] [CONNECTOR:14:eDP-1] [ 3.146806] [drm:check_encoder_state] [ENCODER:13:TMDS-13] [ 3.146808] [drm:check_encoder_state] [ENCODER:22:TMDS-22] [ 3.146809] [drm:check_encoder_state] [ENCODER:25:TMDS-25] [ 3.146810] [drm:check_crtc_state] [CRTC:5] [ 3.146816] [drm:check_crtc_state] [CRTC:8] [ 3.146817] [drm:check_crtc_state] [CRTC:11] [ 3.146819] [drm:intel_crtc_cursor_set] cursor off [ 3.146820] [drm:intel_crtc_set_config] [CRTC:8] [FB:49] #connectors=1 (x y) (0 0) [ 3.146822] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set [ 3.146822] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set [ 3.146825] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3.146827] [drm:drm_mode_debug_printmodeline] Modeline 48:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 3.146828] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=1, fb_changed=0 [ 3.146829] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch [ 3.146831] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 3.146832] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:DP-1] to [CRTC:8] [ 3.146833] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch [ 3.146834] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch [ 3.146836] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 3.146837] [drm:connected_sink_compute_bpp] [CONNECTOR:23:DP-1] checking for sink bpp constrains [ 3.146839] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 14 pixel clock 148500KHz [ 3.146841] [drm:intel_dp_compute_config] DP link bw 14 lane count 1 clock 540000 bpp 24 [ 3.146842] [drm:intel_dp_compute_config] DP link bw required 356400 available 432000 [ 3.146844] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 3.146845] [drm:intel_dump_pipe_config] [CRTC:8][modeset] config for pipe B [ 3.146845] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 3.146846] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 3.146848] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.146849] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6920601, gmch_n: 8388608, link_m: 288358, link_n: 1048576, tu: 64 [ 3.146850] [drm:intel_dump_pipe_config] requested mode: [ 3.146852] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 3.146853] [drm:intel_dump_pipe_config] adjusted mode: [ 3.146855] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 3.146858] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x48 flags: 0x5 [ 3.146858] [drm:intel_dump_pipe_config] port clock: 540000 [ 3.146859] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 3.146861] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3.146862] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 3.146862] [drm:intel_dump_pipe_config] ips: 0 [ 3.146863] [drm:intel_dump_pipe_config] double wide: 0 [ 3.146866] [drm:intel_display_power_get] enabling display [ 3.146867] [drm:hsw_set_power_well] Enabling power well [ 3.148819] [drm:ironlake_update_primary_plane] Writing base 00395000 00000000 0 0 7680 [ 3.148821] [drm:intel_edp_psr_match_conditions] PSR disable by flag [ 3.148823] [drm:intel_crtc_mode_set] [ENCODER:22:TMDS-22] set [MODE:0:1920x1080] [ 3.148824] [drm:intel_ddi_mode_set] Preparing DDI mode on port B, pipe B [ 3.148825] [drm:intel_ddi_mode_set] DP audio on pipe B on DDI [ 3.148825] [drm:intel_ddi_mode_set] DP audio: write eld information [ 3.148827] [drm:intel_write_eld] ELD on [CONNECTOR:23:DP-1], [ENCODER:22:TMDS-22] [ 3.148828] [drm:haswell_write_eld] HDMI: Haswell Audio initialize.... [ 3.148829] [drm:haswell_write_eld] HDMI audio: enable codec [ 3.200780] [drm:g4x_wait_for_vblank] vblank wait timed out [ 3.200781] [drm:haswell_write_eld] HDMI audio: pin eld vld status=0x00000040 [ 3.200783] [drm:haswell_write_eld] HDMI audio: eld vld status=0x00000050 [ 3.200784] [drm:haswell_write_eld] HDMI audio: audio conf: 0x0070fa60 [ 3.200785] [drm:haswell_write_eld] ELD on pipe B [ 3.200786] [drm:haswell_write_eld] ELD: DisplayPort detected [ 3.200789] [drm:haswell_write_eld] port num:0 [ 3.200790] [drm:haswell_write_eld] ELD size 9 [ 3.202189] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 3.218625] [drm:intel_dp_start_link_train] clock recovery OK [ 3.236767] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful [ 3.280751] [drm:intel_update_fbc] more than one pipe active, disabling compression [ 3.280754] [drm:intel_connector_check_state] [CONNECTOR:14:eDP-1] [ 3.280756] [drm:intel_connector_check_state] [CONNECTOR:23:DP-1] [ 3.280760] [drm:check_encoder_state] [ENCODER:13:TMDS-13] [ 3.280761] [drm:check_encoder_state] [ENCODER:22:TMDS-22] [ 3.280763] [drm:check_encoder_state] [ENCODER:25:TMDS-25] [ 3.280764] [drm:check_crtc_state] [CRTC:5] [ 3.280770] [drm:check_crtc_state] [CRTC:8] [ 3.280776] [drm:check_crtc_state] [CRTC:11] [ 3.280778] [drm:intel_crtc_cursor_set] cursor off [ 3.280779] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 3.280780] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 3.280782] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 3.280783] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:DP-1] to [CRTC:8] [ 3.280805] [drm:intel_crtc_set_config] [CRTC:5] [FB:49] #connectors=1 (x y) (0 0) [ 3.280807] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 3.280808] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 3.280810] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:DP-1] to [CRTC:8] [ 3.280811] [drm:intel_crtc_set_config] [CRTC:8] [FB:49] #connectors=1 (x y) (0 0) [ 3.280812] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 3.280814] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 3.280815] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:DP-1] to [CRTC:8] [ 3.293103] [drm:intel_crtc_set_config] [CRTC:5] [FB:49] #connectors=1 (x y) (0 0) [ 3.293104] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 3.293106] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 3.293107] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:DP-1] to [CRTC:8] [ 3.293108] [drm:intel_crtc_set_config] [CRTC:8] [FB:49] #connectors=1 (x y) (0 0) [ 3.293110] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 3.293111] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 3.293112] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:DP-1] to [CRTC:8] [ 3.303421] Console: switching to colour frame buffer device 240x67 [ 3.303433] [drm:intel_crtc_set_config] [CRTC:5] [FB:49] #connectors=1 (x y) (0 0) [ 3.303434] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 3.303436] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 3.303437] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:DP-1] to [CRTC:8] [ 3.303438] [drm:intel_crtc_set_config] [CRTC:8] [FB:49] #connectors=1 (x y) (0 0) [ 3.303439] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 3.303440] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 3.303441] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:DP-1] to [CRTC:8] [ 3.309479] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.309528] i915 0000:00:02.0: registered panic notifier [ 3.315955] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3.316119] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 [ 3.316223] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 3.316810] loop: module loaded [ 3.316958] mei_me 0000:00:16.0: irq 62 for MSI/MSI-X [ 3.319993] ahci 0000:00:1f.2: version 3.0 [ 3.320104] ahci 0000:00:1f.2: irq 63 for MSI/MSI-X [ 3.330804] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x1 impl SATA mode [ 3.330848] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 3.331181] scsi0 : ahci [ 3.331386] scsi1 : ahci [ 3.331445] ata1: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c100 irq 63 [ 3.331479] ata2: DUMMY [ 3.331512] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 3.331551] e1000e: Copyright(c) 1999 - 2014 Intel Corporation. [ 3.331763] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.331824] e1000e 0000:00:19.0: irq 64 for MSI/MSI-X [ 3.499031] e1000e 0000:00:19.0 eth0: registered PHC clock [ 3.499064] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 28:80:23:d4:05:c4 [ 3.499100] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 3.499165] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 3.499213] Intel(R) Wireless WiFi driver for Linux, in-tree: [ 3.499239] Copyright(c) 2003- 2014 Intel Corporation [ 3.499394] iwlwifi 0000:02:00.0: irq 65 for MSI/MSI-X [ 3.499555] iwlwifi 0000:02:00.0: Direct firmware load failed with error -2 [ 3.499590] iwlwifi 0000:02:00.0: Falling back to user helper [ 3.499661] usbcore: registered new interface driver cdc_ether [ 3.499704] usbcore: registered new interface driver cdc_eem [ 3.499737] usbcore: registered new interface driver rndis_host [ 3.499769] usbcore: registered new interface driver cdc_subset [ 3.499807] usbcore: registered new interface driver cdc_ncm [ 3.499959] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.499991] ehci-pci: EHCI PCI platform driver [ 3.500137] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 3.500242] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 3.500287] ehci-pci 0000:00:1d.0: debug port 2 [ 3.504209] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 3.504220] ehci-pci 0000:00:1d.0: irq 17, io mem 0xd073d000 [ 3.509736] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 3.509812] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.509845] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.509878] usb usb1: Product: EHCI Host Controller [ 3.509902] usb usb1: Manufacturer: Linux 3.15.1 ehci_hcd [ 3.509927] usb usb1: SerialNumber: 0000:00:1d.0 [ 3.511398] hub 1-0:1.0: USB hub found [ 3.512668] hub 1-0:1.0: 3 ports detected [ 3.514062] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.515324] ohci-pci: OHCI PCI platform driver [ 3.516584] uhci_hcd: USB Universal Host Controller Interface driver [ 3.517972] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.519339] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 3.520680] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 3.520703] xhci_hcd 0000:00:14.0: irq 66 for MSI/MSI-X [ 3.520750] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.522025] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.523292] usb usb2: Product: xHCI Host Controller [ 3.524545] usb usb2: Manufacturer: Linux 3.15.1 xhci_hcd [ 3.525805] usb usb2: SerialNumber: 0000:00:14.0 [ 3.527228] hub 2-0:1.0: USB hub found [ 3.528477] hub 2-0:1.0: 9 ports detected [ 3.530596] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.531930] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 3.533191] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 3.534420] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.535641] usb usb3: Product: xHCI Host Controller [ 3.536831] usb usb3: Manufacturer: Linux 3.15.1 xhci_hcd [ 3.538003] usb usb3: SerialNumber: 0000:00:14.0 [ 3.539339] hub 3-0:1.0: USB hub found [ 3.540502] hub 3-0:1.0: 4 ports detected [ 3.542132] usbcore: registered new interface driver usb-storage [ 3.543318] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 3.545661] i8042: Detected active multiplexing controller, rev 1.1 [ 3.547445] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.548579] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 3.549704] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 3.550850] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 3.551937] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 3.553065] mousedev: PS/2 mouse device common for all mice [ 3.554407] rtc_cmos 00:05: RTC can wake from S4 [ 3.555621] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 3.556709] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 3.557790] i2c /dev entries driver [ 3.559219] ACPI Warning: SystemIO range 0x000000000000ef80-0x000000000000ef9f conflicts with OpRegion 0x000000000000ef80-0x000000000000ef8f (\_SB_.PCI0.SBUS.SMBI) (20140214/utaddress-258) [ 3.560369] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.561537] uvcvideo: Unable to create debugfs directory [ 3.562700] usbcore: registered new interface driver uvcvideo [ 3.563857] USB Video Class driver (1.1.1) [ 3.565004] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 3.566175] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860) [ 3.567393] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 3.568609] device-mapper: uevent: version 1.0.3 [ 3.569836] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 3.571046] Intel P-state driver initializing. [ 3.572275] Intel pstate controlling: cpu 0 [ 3.573522] Intel pstate controlling: cpu 1 [ 3.574756] Intel pstate controlling: cpu 2 [ 3.575969] Intel pstate controlling: cpu 3 [ 3.577171] hidraw: raw HID events driver (C) Jiri Kosina [ 3.578411] usbcore: registered new interface driver usbhid [ 3.579004] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 3.580800] usbhid: USB HID core driver [ 3.581948] Initializing HPQ6001 module [ 3.582919] input: HP Wireless hotkeys as /devices/virtual/input/input6 [ 3.620793] input: HP WMI hotkeys as /devices/virtual/input/input8 [ 3.637673] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.677881] ata1.00: supports DRM functions and may not be fully accessible [ 3.678284] snd_hda_intel 0000:00:03.0: irq 67 for MSI/MSI-X [ 3.678482] snd_hda_intel 0000:00:1b.0: irq 68 for MSI/MSI-X [ 3.678531] Netfilter messages via NETLINK v0.30. [ 3.678538] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 3.678671] ctnetlink v0.93: registering with nfnetlink. [ 3.678770] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.678794] TCP: cubic registered [ 3.678794] Initializing XFRM netlink socket [ 3.678927] NET: Registered protocol family 10 [ 3.679117] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.679146] sit: IPv6 over IPv4 tunneling driver [ 3.679283] NET: Registered protocol family 17 [ 3.679493] registered taskstats version 1 [ 3.679788] ALSA device list: [ 3.679788] No soundcards found. [ 3.686037] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13 [ 3.686087] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14 [ 3.686135] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15 [ 3.690273] sound hdaudioC1D0: autoconfig: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line [ 3.690275] sound hdaudioC1D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0) [ 3.690276] sound hdaudioC1D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0) [ 3.690277] sound hdaudioC1D0: mono: mono_out=0x0 [ 3.690278] sound hdaudioC1D0: inputs: [ 3.690279] sound hdaudioC1D0: Mic=0xc [ 3.690280] sound hdaudioC1D0: Internal Mic=0x11 [ 3.690281] sound hdaudioC1D0: Line=0xf [ 3.704176] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 3.704178] ata1.00: ATA-9: Samsung SSD 840 EVO 1TB, EXT0BB6Q, max UDMA/133 [ 3.704939] ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 3.706045] ata1.00: supports DRM functions and may not be fully accessible [ 3.707404] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 3.707406] ata1.00: configured for UDMA/133 [ 3.708486] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 EXT0 PQ: 0 ANSI: 5 [ 3.709366] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.709382] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.711331] sd 0:0:0:0: [sda] Write Protect is off [ 3.711453] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16 [ 3.711484] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17 [ 3.711513] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18 [ 3.711542] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19 [ 3.715600] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.715608] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.716683] sda: sda1 sda2 sda3 [ 3.718036] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.733760] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 3.738606] [drm:gen6_enable_rps] Overclocking supported. Max: 1100MHz, Overclock max: 1100MHz [ 3.816635] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 3.817962] Switched to clocksource tsc [ 3.932099] usb 1-1: New USB device found, idVendor=8087, idProduct=8000 [ 3.933258] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.934439] hub 1-1:1.0: USB hub found [ 3.935302] hub 1-1:1.0: 8 ports detected [ 4.006496] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64 [ 4.090552] usb 2-1: new high-speed USB device number 2 using xhci_hcd [ 4.255842] usb 2-1: New USB device found, idVendor=0424, idProduct=2134 [ 4.256988] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.257988] usb 2-1: Product: USB2134B [ 4.258802] usb 2-1: Manufacturer: SMSC [ 4.259785] hub 2-1:1.0: USB hub found [ 4.260564] hub 2-1:1.0: 4 ports detected [ 4.414461] usb 2-3: new high-speed USB device number 3 using xhci_hcd [ 4.473053] input: PS/2 Generic Mouse as /devices/platform/i8042/serio2/input/input12 [ 4.581701] usb 2-3: New USB device found, idVendor=0424, idProduct=2134 [ 4.584766] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.587170] usb 2-3: Product: USB2134B [ 4.589776] usb 2-3: Manufacturer: SMSC [ 4.592582] hub 2-3:1.0: USB hub found [ 4.594957] hub 2-3:1.0: 4 ports detected [ 4.750248] usb 2-5: new full-speed USB device number 4 using xhci_hcd [ 4.917537] usb 2-5: New USB device found, idVendor=138a, idProduct=003f [ 4.920501] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 4.923413] usb 2-5: SerialNumber: 00305cb9a793 [ 4.985223] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 4.985236] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 5.080215] usb 2-7: new high-speed USB device number 5 using xhci_hcd [ 5.283336] usb 2-7: New USB device found, idVendor=04f2, idProduct=b3ed [ 5.284449] usb 2-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 5.286044] usb 2-7: Product: HP HD Webcam [ 5.287618] usb 2-7: Manufacturer: Chicony Electronics Co.,Ltd. [ 5.289197] usb 2-7: SerialNumber: 200901010001 [ 5.292407] uvcvideo: Found UVC 1.00 device HP HD Webcam (04f2:b3ed) [ 5.295470] input: HP HD Webcam as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/input/input21 [ 5.317553] psmouse serio3: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26800, board id: 2768, fw id: 1478018 [ 5.355541] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input20 [ 5.360690] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities [ 5.362043] EXT4-fs (sda2): couldn't mount as ext2 due to feature incompatibilities [ 5.365259] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 5.366453] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [ 5.370746] devtmpfs: mounted [ 5.372266] Freeing unused kernel memory: 812K (ffffffff819ee000 - ffffffff81ab9000) [ 5.398047] usb 3-1: new SuperSpeed USB device number 2 using xhci_hcd [ 5.410362] usb 3-1: New USB device found, idVendor=0424, idProduct=5534 [ 5.411775] usb 3-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0 [ 5.412673] usb 3-1: Product: USB5534B [ 5.413531] usb 3-1: Manufacturer: SMSC [ 5.414808] hub 3-1:1.0: USB hub found [ 5.415721] hub 3-1:1.0: 4 ports detected [ 5.420474] random: systemd urandom read with 87 bits of entropy available [ 5.422453] systemd[1]: systemd 214 running in system mode. (+PAM -AUDIT -SELINUX +IMA -SYSVINIT +LIBCRYPTSETUP -GCRYPT +ACL -XZ +SECCOMP -APPARMOR) [ 5.423904] systemd[1]: Detected architecture 'x86-64'. [ 5.429444] systemd[1]: Set hostname to . [ 5.519037] usb 3-3: new SuperSpeed USB device number 3 using xhci_hcd [ 5.531293] usb 3-3: New USB device found, idVendor=0424, idProduct=5534 [ 5.533336] usb 3-3: New USB device strings: Mfr=2, Product=3, SerialNumber=0 [ 5.534485] usb 3-3: Product: USB5534B [ 5.535471] usb 3-3: Manufacturer: SMSC [ 5.536769] hub 3-3:1.0: USB hub found [ 5.537835] hub 3-3:1.0: 4 ports detected [ 5.543406] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 5.544539] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.545333] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 5.547036] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 5.547866] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. [ 5.548699] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 5.549544] systemd[1]: Starting Paths. [ 5.551233] systemd[1]: Reached target Paths. [ 5.552062] systemd[1]: Expecting device dev-disk-by\x2duuid-93c23e7b\x2d4395\x2d422f\x2d81fc\x2de880a28f1e8f.device... [ 5.554044] systemd[1]: Expecting device dev-mapper-backup.device... [ 5.555763] systemd[1]: Starting Swap. [ 5.557481] systemd[1]: Reached target Swap. [ 5.558329] systemd[1]: Expecting device dev-disk-by\x2duuid-4dd290af\x2de0cb\x2d443c\x2d9d25\x2d863e402ae45f.device... [ 5.560111] systemd[1]: Expecting device dev-mapper-home.device... [ 5.561985] systemd[1]: Starting Root Slice. [ 5.564533] systemd[1]: Created slice Root Slice. [ 5.565455] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 5.567314] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 5.568216] systemd[1]: Starting Delayed Shutdown Socket. [ 5.570101] systemd[1]: Listening on Delayed Shutdown Socket. [ 5.571005] systemd[1]: Starting Journal Socket (/dev/log). [ 5.572844] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.573737] systemd[1]: Starting udev Kernel Socket. [ 5.575481] systemd[1]: Listening on udev Kernel Socket. [ 5.576378] systemd[1]: Starting udev Control Socket. [ 5.578152] systemd[1]: Listening on udev Control Socket. [ 5.579008] systemd[1]: Starting User and Session Slice. [ 5.580784] systemd[1]: Created slice User and Session Slice. [ 5.581645] systemd[1]: Starting Journal Socket. [ 5.583371] systemd[1]: Listening on Journal Socket. [ 5.584257] systemd[1]: Starting System Slice. [ 5.586051] systemd[1]: Created slice System Slice. [ 5.586906] systemd[1]: Starting File System Check on Root Device... [ 5.588756] systemd[1]: Starting system-systemd\x2dfsck.slice. [ 5.589079] random: nonblocking pool is initialized [ 5.591841] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 5.592840] systemd[1]: Mounting Temporary Directory... [ 5.598974] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 5.601481] systemd[1]: Starting system-systemd\x2dcryptsetup.slice. [ 5.603561] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice. [ 5.604601] systemd[1]: Mounting POSIX Message Queue File System... [ 5.606720] systemd[1]: Mounted Debug File System. [ 5.611531] systemd[1]: Starting Load Kernel Modules... [ 5.612934] usb 2-1.2: new full-speed USB device number 6 using xhci_hcd [ 5.614945] systemd[1]: Starting Setup Virtual Console... [ 5.618330] systemd[1]: Starting Apply Kernel Variables... [ 5.620974] systemd[1]: Mounting Huge Pages File System... [ 5.625280] systemd[1]: Started Set Up Additional Binary Formats. [ 5.626783] systemd[1]: Starting udev Coldplug all Devices... [ 5.629122] systemd[1]: Starting system-php\x2dfpm.slice. [ 5.631064] systemd[1]: Created slice system-php\x2dfpm.slice. [ 5.632034] systemd[1]: Starting system-getty.slice. [ 5.633966] systemd[1]: Created slice system-getty.slice. [ 5.634849] systemd[1]: Starting Journal Service... [ 5.638126] vboxdrv: Found 4 processor cores. [ 5.638390] systemd[1]: Started Journal Service. [ 5.639926] vboxdrv: fAsync=0 offMin=0xe4 offMax=0x294129 [ 5.641002] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 5.641003] vboxdrv: Successfully loaded version 4.3.12 (interface 0x001a0007). [ 5.673381] EXT4-fs (sda2): re-mounted. Opts: discard [ 5.682816] systemd-udevd[219]: starting version 214 [ 5.699461] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c245 [ 5.700413] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.701824] usb 2-1.2: Product: Gaming Mouse G400 [ 5.703195] usb 2-1.2: Manufacturer: Logitech [ 5.706492] input: Logitech Gaming Mouse G400 as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:046D:C245.0001/input/input23 [ 5.707986] hid-generic 0003:046D:C245.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Gaming Mouse G400] on usb-0000:00:14.0-1.2/input0 [ 5.710188] hid-generic 0003:046D:C245.0002: hiddev0,hidraw1: USB HID v1.10 Device [Logitech Gaming Mouse G400] on usb-0000:00:14.0-1.2/input1 [ 5.750961] systemd-udevd[233]: renamed network interface eth0 to enp0s25 [ 5.752187] iwlwifi 0000:02:00.0: loaded firmware version 23.214.9.0 op_mode iwlmvm [ 5.752194] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 5.752505] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S [ 5.752721] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S [ 5.762701] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=937/937 [ 5.762705] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 5.783878] usb 2-1.4: new full-speed USB device number 7 using xhci_hcd [ 5.871062] usb 2-1.4: New USB device found, idVendor=03f0, idProduct=8204 [ 5.872361] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.873233] usb 2-1.4: Product: Deskjet 6500 [ 5.874096] usb 2-1.4: Manufacturer: HP [ 5.874950] usb 2-1.4: SerialNumber: MY47K2R2FK040N [ 5.887235] WARNING! power/level is deprecated; use power/control instead [ 5.948293] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 5.948816] usb 2-3.2: new full-speed USB device number 8 using xhci_hcd [ 5.956870] systemd-udevd[227]: renamed network interface wlan0 to wlo1 [ 6.035383] usb 2-3.2: New USB device found, idVendor=8087, idProduct=07dc [ 6.036739] usb 2-3.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 6.099945] usb 3-1.3: new SuperSpeed USB device number 4 using xhci_hcd [ 6.112327] usb 3-1.3: New USB device found, idVendor=1058, idProduct=0748 [ 6.113704] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 6.114969] usb 3-1.3: Product: My Passport 0748 [ 6.115936] usb 3-1.3: Manufacturer: Western Digital [ 6.116834] usb 3-1.3: SerialNumber: 57584C31453932465A455032 [ 6.118336] usb-storage 3-1.3:1.0: USB Mass Storage device detected [ 6.119508] scsi2 : usb-storage 3-1.3:1.0 [ 7.120879] scsi 2:0:0:0: Direct-Access WD My Passport 0748 1019 PQ: 0 ANSI: 6 [ 7.124580] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 7.124651] sd 2:0:0:0: [sdb] 3906963456 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 7.124927] sd 2:0:0:0: [sdb] Write Protect is off [ 7.124933] sd 2:0:0:0: [sdb] Mode Sense: 47 00 10 08 [ 7.125206] sd 2:0:0:0: [sdb] No Caching mode page found [ 7.125210] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 10.421199] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: discard [ 12.081473] sdb: unknown partition table [ 12.081602] scsi 2:0:0:1: Enclosure WD SES Device 1019 PQ: 0 ANSI: 6 [ 12.084774] scsi 2:0:0:1: Attached scsi generic sg2 type 13 [ 12.446099] sd 2:0:0:0: [sdb] Attached SCSI disk [ 12.859041] systemd-journald[202]: Received request to flush runtime journal from PID 1 [ 12.972629] [drm:i915_gem_open] [ 12.972666] [drm:intel_crtc_cursor_set] cursor off [ 12.972669] [drm:intel_crtc_set_config] [CRTC:5] [FB:49] #connectors=1 (x y) (0 0) [ 12.972672] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 12.972674] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 12.972676] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:DP-1] to [CRTC:8] [ 12.972678] [drm:intel_crtc_cursor_set] cursor off [ 12.972680] [drm:intel_crtc_set_config] [CRTC:8] [FB:49] #connectors=1 (x y) (0 0) [ 12.972682] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 12.972684] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 12.972685] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:DP-1] to [CRTC:8] [ 12.972687] [drm:intel_crtc_cursor_set] cursor off [ 12.972688] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 12.972690] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 12.972692] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 12.972694] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:DP-1] to [CRTC:8] [ 13.007476] [drm:intel_crtc_set_config] [CRTC:5] [FB:49] #connectors=1 (x y) (0 0) [ 13.007479] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 13.007481] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 13.007482] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:DP-1] to [CRTC:8] [ 13.007484] [drm:intel_crtc_set_config] [CRTC:8] [FB:49] #connectors=1 (x y) (0 0) [ 13.007485] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 13.007486] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 13.007487] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:DP-1] to [CRTC:8] [ 13.017300] [drm:i915_gem_open] [ 13.017314] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[3] [ 13.020099] [drm:drm_mode_addfb] [FB:50] [ 13.020209] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[3] [ 13.020212] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[3] [ 13.020237] [drm:intel_crtc_cursor_set] cursor off [ 13.020242] [drm:intel_crtc_cursor_set] cursor off [ 13.020247] [drm:intel_crtc_cursor_set] cursor off [ 13.020249] [drm:drm_mode_getconnector] [CONNECTOR:14:?] [ 13.020256] [drm:drm_mode_getconnector] [CONNECTOR:14:?] [ 13.020357] [drm:drm_mode_getconnector] [CONNECTOR:23:?] [ 13.020363] [drm:drm_mode_getconnector] [CONNECTOR:23:?] [ 13.020371] [drm:drm_mode_getconnector] [CONNECTOR:24:?] [ 13.020375] [drm:drm_mode_getconnector] [CONNECTOR:24:?] [ 13.020382] [drm:drm_mode_getconnector] [CONNECTOR:26:?] [ 13.020385] [drm:drm_mode_getconnector] [CONNECTOR:26:?] [ 13.020392] [drm:drm_mode_getconnector] [CONNECTOR:27:?] [ 13.020394] [drm:drm_mode_getconnector] [CONNECTOR:27:?] [ 13.061440] [drm:drm_mode_addfb] [FB:50] [ 13.063741] [drm:drm_mode_addfb] [FB:51] [ 13.063756] [drm:drm_mode_setcrtc] [CRTC:5] [ 13.063760] [drm:drm_mode_setcrtc] [CONNECTOR:14:eDP-1] [ 13.063762] [drm:intel_crtc_set_config] [CRTC:5] [FB:50] #connectors=1 (x y) (0 0) [ 13.063765] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=1 [ 13.063767] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 13.063769] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:DP-1] to [CRTC:8] [ 13.064817] [drm:ironlake_update_primary_plane] Writing base 00B7E000 00000000 0 0 7680 [ 13.068220] [drm:intel_edp_psr_match_conditions] PSR disable by flag [ 13.068366] [drm:drm_mode_setcrtc] [CRTC:8] [ 13.068371] [drm:drm_mode_setcrtc] [CONNECTOR:23:DP-1] [ 13.068373] [drm:intel_crtc_set_config] [CRTC:8] [FB:50] #connectors=1 (x y) (0 0) [ 13.068376] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=1 [ 13.068378] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 13.068380] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:DP-1] to [CRTC:8] [ 13.068384] [drm:ironlake_update_primary_plane] Writing base 00B7E000 00000000 0 0 7680 [ 13.076218] [drm:intel_edp_psr_match_conditions] PSR disable by flag [ 13.076231] [drm:drm_mode_setcrtc] [CRTC:11] [ 13.076232] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 13.076234] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 13.076236] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 13.076238] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:DP-1] to [CRTC:8] [ 13.164303] e1000e 0000:00:19.0: irq 64 for MSI/MSI-X [ 13.265185] e1000e 0000:00:19.0: irq 64 for MSI/MSI-X [ 13.265264] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 13.267170] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S [ 13.267387] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S [ 13.277867] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 13.449428] [drm:i915_gem_open] [ 13.465796] [drm:i915_gem_context_create_ioctl] HW context 1 created [ 13.466773] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed [ 13.574375] [drm:intel_dp_detect] [CONNECTOR:23:DP-1] [ 13.574684] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 01 00 15 01 83 02 00 00 00 00 00 04 [ 13.574686] [drm:intel_dp_get_dpcd] Displayport TPS3 supported [ 13.575350] [drm:intel_dp_probe_oui] Sink OUI: 000000 [ 13.575531] [drm:intel_dp_probe_oui] Branch OUI: 90cc24 [ 13.617444] [drm:drm_detect_monitor_audio] Monitor has basic audio support [ 13.617467] [drm:intel_dp_detect] [CONNECTOR:26:DP-2] [ 13.617479] [drm:intel_hdmi_detect] [CONNECTOR:24:HDMI-A-1] [ 13.617631] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 13.617632] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 13.617642] [drm:intel_hdmi_detect] [CONNECTOR:27:HDMI-A-2] [ 13.617798] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 13.617799] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 13.617809] [drm:intel_dp_detect] [CONNECTOR:14:eDP-1] [ 13.617812] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 13.617818] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 13.617976] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 13.618132] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 13.810997] [drm:drm_mode_getconnector] [CONNECTOR:14:?] [ 13.811001] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:eDP-1] [ 13.811004] [drm:intel_dp_detect] [CONNECTOR:14:eDP-1] [ 13.811168] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 13.811324] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 13.811333] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 13.811336] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:eDP-1] probed modes : [ 13.811339] [drm:drm_mode_debug_printmodeline] Modeline 15:"1920x1080" 60 141000 1920 1936 1952 2104 1080 1083 1097 1116 0x48 0xa [ 13.811342] [drm:drm_mode_debug_printmodeline] Modeline 16:"1920x1080" 40 94000 1920 1936 1952 2104 1080 1083 1097 1116 0x40 0xa [ 13.811345] [drm:drm_mode_getconnector] [CONNECTOR:14:?] [ 13.811435] [drm:drm_mode_getconnector] [CONNECTOR:23:?] [ 13.811437] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:DP-1] [ 13.811439] [drm:intel_dp_detect] [CONNECTOR:23:DP-1] [ 13.811726] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 01 00 15 01 83 02 00 00 00 00 00 04 [ 13.811727] [drm:intel_dp_get_dpcd] Displayport TPS3 supported [ 13.812404] [drm:intel_dp_probe_oui] Sink OUI: 000000 [ 13.812591] [drm:intel_dp_probe_oui] Branch OUI: 90cc24 [ 13.858528] [drm:drm_detect_monitor_audio] Monitor has basic audio support [ 13.900325] [drm:drm_edid_to_eld] ELD monitor DELL U2414H [ 13.900328] [drm:drm_edid_to_eld] ELD size 9, SAD count 1 [ 13.900340] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:DP-1] probed modes : [ 13.900343] [drm:drm_mode_debug_printmodeline] Modeline 30:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 13.900345] [drm:drm_mode_debug_printmodeline] Modeline 31:"3840x1080" 60 278100 3840 3884 3972 4120 1080 1084 1089 1125 0x40 0x5 [ 13.900348] [drm:drm_mode_debug_printmodeline] Modeline 32:"2560x1024" 60 189830 2560 2608 2720 2968 1024 1025 1028 1066 0x40 0x5 [ 13.900350] [drm:drm_mode_debug_printmodeline] Modeline 45:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 13.900352] [drm:drm_mode_debug_printmodeline] Modeline 36:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 13.900354] [drm:drm_mode_debug_printmodeline] Modeline 35:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x0 0x6 [ 13.900357] [drm:drm_mode_debug_printmodeline] Modeline 41:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 13.900359] [drm:drm_mode_debug_printmodeline] Modeline 34:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 13.900361] [drm:drm_mode_debug_printmodeline] Modeline 33:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 13.900363] [drm:drm_mode_debug_printmodeline] Modeline 42:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 13.900366] [drm:drm_mode_debug_printmodeline] Modeline 43:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 13.900368] [drm:drm_mode_debug_printmodeline] Modeline 44:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 13.900370] [drm:drm_mode_debug_printmodeline] Modeline 37:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 13.900372] [drm:drm_mode_debug_printmodeline] Modeline 38:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 13.900374] [drm:drm_mode_debug_printmodeline] Modeline 39:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 13.900377] [drm:drm_mode_debug_printmodeline] Modeline 46:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 13.900379] [drm:drm_mode_debug_printmodeline] Modeline 40:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 13.900393] [drm:drm_mode_getconnector] [CONNECTOR:23:?] [ 13.900566] [drm:drm_mode_getconnector] [CONNECTOR:24:?] [ 13.900569] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:24:HDMI-A-1] [ 13.900571] [drm:intel_hdmi_detect] [CONNECTOR:24:HDMI-A-1] [ 13.900730] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 13.900732] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 13.900734] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:24:HDMI-A-1] disconnected [ 13.900737] [drm:drm_mode_getconnector] [CONNECTOR:26:?] [ 13.900739] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:26:DP-2] [ 13.900741] [drm:intel_dp_detect] [CONNECTOR:26:DP-2] [ 13.900744] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:26:DP-2] disconnected [ 13.900746] [drm:drm_mode_getconnector] [CONNECTOR:27:?] [ 13.900747] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:27:HDMI-A-2] [ 13.900749] [drm:intel_hdmi_detect] [CONNECTOR:27:HDMI-A-2] [ 13.900899] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 13.900901] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 13.900902] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:27:HDMI-A-2] disconnected [ 13.901632] [drm:i915_gem_open] [ 13.914780] [drm:i915_gem_context_create_ioctl] HW context 1 created [ 13.915357] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed [ 13.916670] [drm:i915_gem_context_create_ioctl] HW context 1 created [ 13.989077] [drm:drm_mode_addfb] [FB:52] [ 13.991504] [drm:drm_mode_addfb] [FB:53] [ 13.991533] [drm:drm_mode_setcrtc] [CRTC:5] [ 13.991537] [drm:drm_mode_setcrtc] [CONNECTOR:14:eDP-1] [ 13.991539] [drm:intel_crtc_set_config] [CRTC:5] [FB:52] #connectors=1 (x y) (0 0) [ 13.991542] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=1 [ 13.991544] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 13.991546] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:DP-1] to [CRTC:8] [ 13.993632] [drm:ironlake_update_primary_plane] Writing base 01B8D000 00000000 0 0 15360 [ 14.000890] [drm:intel_edp_psr_match_conditions] PSR disable by flag [ 14.001052] [drm:drm_mode_setcrtc] [CRTC:8] [ 14.001055] [drm:drm_mode_setcrtc] [CONNECTOR:23:DP-1] [ 14.001057] [drm:intel_crtc_set_config] [CRTC:8] [FB:52] #connectors=1 (x y) (0 0) [ 14.001059] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=1 [ 14.001061] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 14.001063] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:DP-1] to [CRTC:8] [ 14.001066] [drm:ironlake_update_primary_plane] Writing base 01B8D000 00000000 0 0 15360 [ 14.008886] [drm:intel_edp_psr_match_conditions] PSR disable by flag [ 14.009200] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=0/937 [ 14.009202] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 14.009239] [drm:drm_mode_setcrtc] [CRTC:5] [ 14.009242] [drm:drm_mode_setcrtc] [CONNECTOR:23:DP-1] [ 14.009244] [drm:intel_crtc_set_config] [CRTC:5] [FB:52] #connectors=1 (x y) (1920 0) [ 14.009246] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set [ 14.009249] [drm:drm_mode_debug_printmodeline] Modeline 47:"1920x1080" 60 141000 1920 1936 1952 2104 1080 1083 1097 1116 0x48 0xa [ 14.009251] [drm:drm_mode_debug_printmodeline] Modeline 51:"" 0 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x0 0x5 [ 14.009253] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=1 [ 14.009255] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [NOCRTC] [ 14.009256] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch [ 14.009258] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:DP-1] to [CRTC:5] [ 14.009260] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch [ 14.009261] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch [ 14.009262] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch [ 14.009265] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 2 [ 14.009267] [drm:connected_sink_compute_bpp] [CONNECTOR:23:DP-1] checking for sink bpp constrains [ 14.009270] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 14 pixel clock 148500KHz [ 14.009273] [drm:intel_dp_compute_config] DP link bw 14 lane count 1 clock 540000 bpp 24 [ 14.009274] [drm:intel_dp_compute_config] DP link bw required 356400 available 432000 [ 14.009276] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 14.009278] [drm:intel_dump_pipe_config] [CRTC:5][modeset] config for pipe A [ 14.009279] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 14.009281] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 14.009283] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 14.009285] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6920601, gmch_n: 8388608, link_m: 288358, link_n: 1048576, tu: 64 [ 14.009286] [drm:intel_dump_pipe_config] requested mode: [ 14.009288] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x0 0x5 [ 14.009290] [drm:intel_dump_pipe_config] adjusted mode: [ 14.009292] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x0 0x5 [ 14.009294] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x0 flags: 0x5 [ 14.009296] [drm:intel_dump_pipe_config] port clock: 540000 [ 14.009297] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 14.009299] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 14.009300] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 14.009302] [drm:intel_dump_pipe_config] ips: 1 [ 14.009303] [drm:intel_dump_pipe_config] double wide: 0 [ 14.043143] [drm:i915_setup_compression] reserved 16588800 bytes of contiguous stolen space for FBC [ 14.066854] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 14.066859] [drm:intel_edp_backlight_off] [ 14.085091] [drm:intel_edp_panel_off] Turn eDP power off [ 14.092907] [drm:gen7_enable_fbc] enabled fbc on plane A [ 14.267856] [drm:wait_panel_off] Wait for panel power off time [ 14.267862] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 14.322833] [drm:wait_panel_status] Wait complete [ 14.322845] [drm:intel_update_fbc] no output, disabling [ 14.322847] [drm:intel_update_fbc] unsupported config, disabling FBC [ 14.322848] [drm:ironlake_disable_fbc] disabled FBC [ 14.322873] [drm:ironlake_update_primary_plane] Writing base 01B8D000 FFFFFFFFFFFF2E00 0 0 15360 [ 14.322876] [drm:intel_edp_psr_match_conditions] PSR disable by flag [ 14.322879] [drm:intel_crtc_mode_set] [ENCODER:22:TMDS-22] set [MODE:0:] [ 14.322880] [drm:intel_ddi_mode_set] Preparing DDI mode on port B, pipe A [ 14.322881] [drm:intel_ddi_mode_set] DP audio on pipe A on DDI [ 14.322882] [drm:intel_ddi_mode_set] DP audio: write eld information [ 14.322885] [drm:intel_write_eld] ELD on [CONNECTOR:23:DP-1], [ENCODER:22:TMDS-22] [ 14.322886] [drm:haswell_write_eld] HDMI: Haswell Audio initialize.... [ 14.322887] [drm:haswell_write_eld] HDMI audio: enable codec [ 14.374812] [drm:g4x_wait_for_vblank] vblank wait timed out [ 14.374817] [drm:haswell_write_eld] HDMI audio: pin eld vld status=0x00000004 [ 14.374819] [drm:haswell_write_eld] HDMI audio: eld vld status=0x00000005 [ 14.374821] [drm:haswell_write_eld] HDMI audio: audio conf: 0x0070fa60 [ 14.374822] [drm:haswell_write_eld] ELD on pipe A [ 14.374824] [drm:haswell_write_eld] ELD: DisplayPort detected [ 14.374828] [drm:haswell_write_eld] port num:0 [ 14.374828] [drm:haswell_write_eld] ELD size 9 [ 14.376254] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 14.392692] [drm:intel_dp_start_link_train] clock recovery OK [ 14.410730] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful [ 14.428724] [drm:i915_setup_compression] reserved 16588800 bytes of contiguous stolen space for FBC [ 14.428730] [drm:intel_connector_check_state] [CONNECTOR:23:DP-1] [ 14.428734] [drm:check_encoder_state] [ENCODER:13:TMDS-13] [ 14.428735] [drm:check_encoder_state] [ENCODER:22:TMDS-22] [ 14.428737] [drm:check_encoder_state] [ENCODER:25:TMDS-25] [ 14.428739] [drm:check_crtc_state] [CRTC:5] [ 14.428745] [drm:check_crtc_state] [CRTC:8] [ 14.428747] [drm:check_crtc_state] [CRTC:11] [ 14.429104] [drm:drm_mode_setcrtc] [CRTC:8] [ 14.429108] [drm:drm_mode_setcrtc] [CONNECTOR:14:eDP-1] [ 14.429110] [drm:intel_crtc_set_config] [CRTC:8] [FB:52] #connectors=1 (x y) (0 0) [ 14.429112] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set [ 14.429113] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set [ 14.429116] [drm:drm_mode_debug_printmodeline] Modeline 48:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 14.429119] [drm:drm_mode_debug_printmodeline] Modeline 51:"" 0 141000 1920 1936 1952 2104 1080 1083 1097 1116 0x0 0xa [ 14.429120] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=1, fb_changed=0 [ 14.429122] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch [ 14.429123] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:8] [ 14.429125] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:DP-1] to [CRTC:5] [ 14.429126] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch [ 14.429127] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch [ 14.429130] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 14.429132] [drm:connected_sink_compute_bpp] [CONNECTOR:14:eDP-1] checking for sink bpp constrains [ 14.429133] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18 [ 14.429136] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 141000KHz [ 14.429137] [drm:intel_dp_compute_config] using min 1 lanes per VBT [ 14.429138] [drm:intel_dp_compute_config] using min 0a link bw per VBT [ 14.429140] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 18 [ 14.429141] [drm:intel_dp_compute_config] DP link bw required 253800 available 432000 [ 14.429144] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1 [ 14.429145] [drm:intel_dump_pipe_config] [CRTC:8][modeset] config for pipe B [ 14.429147] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 14.429148] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 14.429149] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 14.429151] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4928307, gmch_n: 8388608, link_m: 273794, link_n: 524288, tu: 64 [ 14.429152] [drm:intel_dump_pipe_config] requested mode: [ 14.429154] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 141000 1920 1936 1952 2104 1080 1083 1097 1116 0x0 0xa [ 14.429156] [drm:intel_dump_pipe_config] adjusted mode: [ 14.429158] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 141000 1920 1936 1952 2104 1080 1083 1097 1116 0x48 0xa [ 14.429160] [drm:intel_dump_crtc_timings] crtc timings: 141000 1920 1936 1952 2104 1080 1083 1097 1116, type: 0x48 flags: 0xa [ 14.429161] [drm:intel_dump_pipe_config] port clock: 270000 [ 14.429162] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 14.429164] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 14.429165] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 14.429166] [drm:intel_dump_pipe_config] ips: 0 [ 14.429167] [drm:intel_dump_pipe_config] double wide: 0 [ 14.429187] [drm:ironlake_update_primary_plane] Writing base 01B8D000 00000000 0 0 15360 [ 14.429191] [drm:i915_setup_compression] reserved 16588800 bytes of contiguous stolen space for FBC [ 14.429192] [drm:intel_cancel_fbc_work] cancelling pending FBC enable [ 14.429194] [drm:intel_edp_psr_match_conditions] PSR disable by flag [ 14.429196] [drm:intel_crtc_mode_set] [ENCODER:13:TMDS-13] set [MODE:0:] [ 14.429198] [drm:intel_ddi_mode_set] Preparing DDI mode on port A, pipe B [ 14.429199] [drm:intel_edp_panel_on] Turn eDP power on [ 14.429201] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 14.478871] [drm:gen7_enable_fbc] enabled fbc on plane A [ 14.868640] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000 [ 14.901625] [drm:wait_panel_status] Wait complete [ 14.901631] [drm:wait_panel_on] Wait for panel power on [ 14.901635] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003 [ 15.110550] [drm:wait_panel_status] Wait complete [ 15.110556] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 15.110563] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 15.111656] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 15.112094] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 15.112523] [drm:intel_dp_start_link_train] clock recovery OK [ 15.113262] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful [ 15.113506] [drm:intel_edp_backlight_on] [ 15.113510] [drm:intel_panel_enable_backlight] pipe B [ 15.113513] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 15.113518] [drm:intel_edp_psr_match_conditions] PSR disable by flag [ 15.161514] [drm:intel_update_fbc] more than one pipe active, disabling compression [ 15.161519] [drm:intel_update_fbc] unsupported config, disabling FBC [ 15.161521] [drm:ironlake_disable_fbc] disabled FBC [ 15.161527] [drm:intel_connector_check_state] [CONNECTOR:14:eDP-1] [ 15.161530] [drm:intel_connector_check_state] [CONNECTOR:23:DP-1] [ 15.161535] [drm:check_encoder_state] [ENCODER:13:TMDS-13] [ 15.161536] [drm:check_encoder_state] [ENCODER:22:TMDS-22] [ 15.161538] [drm:check_encoder_state] [ENCODER:25:TMDS-25] [ 15.161539] [drm:check_crtc_state] [CRTC:5] [ 15.161546] [drm:check_crtc_state] [CRTC:8] [ 15.161552] [drm:check_crtc_state] [CRTC:11] [ 15.161581] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=937/937 [ 15.161583] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 15.953040] [drm:drm_mode_getconnector] [CONNECTOR:14:?] [ 15.953048] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:eDP-1] [ 15.953053] [drm:intel_dp_detect] [CONNECTOR:14:eDP-1] [ 15.953347] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 15.953505] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 15.953517] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 15.953521] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:eDP-1] probed modes : [ 15.953525] [drm:drm_mode_debug_printmodeline] Modeline 15:"1920x1080" 60 141000 1920 1936 1952 2104 1080 1083 1097 1116 0x48 0xa [ 15.953527] [drm:drm_mode_debug_printmodeline] Modeline 16:"1920x1080" 40 94000 1920 1936 1952 2104 1080 1083 1097 1116 0x40 0xa [ 15.953533] [drm:drm_mode_getconnector] [CONNECTOR:14:?] [ 15.953651] [drm:drm_mode_getconnector] [CONNECTOR:23:?] [ 15.953654] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:DP-1] [ 15.953657] [drm:intel_dp_detect] [CONNECTOR:23:DP-1] [ 15.954010] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 01 00 15 01 83 02 00 00 00 00 00 04 [ 15.954013] [drm:intel_dp_get_dpcd] Displayport TPS3 supported [ 15.954861] [drm:intel_dp_probe_oui] Sink OUI: 000000 [ 15.955045] [drm:intel_dp_probe_oui] Branch OUI: 90cc24 [ 15.997087] [drm:drm_detect_monitor_audio] Monitor has basic audio support [ 16.038960] [drm:drm_edid_to_eld] ELD monitor DELL U2414H [ 16.038964] [drm:drm_edid_to_eld] ELD size 9, SAD count 1 [ 16.038978] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:DP-1] probed modes : [ 16.038982] [drm:drm_mode_debug_printmodeline] Modeline 30:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 16.038984] [drm:drm_mode_debug_printmodeline] Modeline 31:"3840x1080" 60 278100 3840 3884 3972 4120 1080 1084 1089 1125 0x40 0x5 [ 16.038987] [drm:drm_mode_debug_printmodeline] Modeline 32:"2560x1024" 60 189830 2560 2608 2720 2968 1024 1025 1028 1066 0x40 0x5 [ 16.038990] [drm:drm_mode_debug_printmodeline] Modeline 45:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 16.038992] [drm:drm_mode_debug_printmodeline] Modeline 36:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 16.038995] [drm:drm_mode_debug_printmodeline] Modeline 35:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x0 0x6 [ 16.038997] [drm:drm_mode_debug_printmodeline] Modeline 41:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 16.039000] [drm:drm_mode_debug_printmodeline] Modeline 34:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 16.039002] [drm:drm_mode_debug_printmodeline] Modeline 33:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 16.039005] [drm:drm_mode_debug_printmodeline] Modeline 42:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 16.039007] [drm:drm_mode_debug_printmodeline] Modeline 43:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 16.039010] [drm:drm_mode_debug_printmodeline] Modeline 44:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 16.039013] [drm:drm_mode_debug_printmodeline] Modeline 37:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 16.039015] [drm:drm_mode_debug_printmodeline] Modeline 38:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 16.039018] [drm:drm_mode_debug_printmodeline] Modeline 39:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 16.039020] [drm:drm_mode_debug_printmodeline] Modeline 46:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 16.039023] [drm:drm_mode_debug_printmodeline] Modeline 40:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 16.039037] [drm:drm_mode_getconnector] [CONNECTOR:23:?] [ 16.039076] [drm:drm_mode_getconnector] [CONNECTOR:24:?] [ 16.039078] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:24:HDMI-A-1] [ 16.039080] [drm:intel_hdmi_detect] [CONNECTOR:24:HDMI-A-1] [ 16.039818] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 16.039820] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 16.039822] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:24:HDMI-A-1] disconnected [ 16.039827] [drm:drm_mode_getconnector] [CONNECTOR:26:?] [ 16.039829] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:26:DP-2] [ 16.039831] [drm:intel_dp_detect] [CONNECTOR:26:DP-2] [ 16.039834] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:26:DP-2] disconnected [ 16.039836] [drm:drm_mode_getconnector] [CONNECTOR:27:?] [ 16.039838] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:27:HDMI-A-2] [ 16.039839] [drm:intel_hdmi_detect] [CONNECTOR:27:HDMI-A-2] [ 16.039994] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 16.039995] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 16.039997] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:27:HDMI-A-2] disconnected [ 16.448565] [drm:drm_mode_addfb] [FB:51] [ 16.456983] [drm:drm_mode_addfb] [FB:54] [ 16.620998] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 16.621006] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 16.696552] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 16.696581] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 17.427941] [drm:drm_mode_addfb] [FB:55] [ 19.709340] [drm:intel_crtc_cursor_set] cursor off [ 19.709351] [drm:intel_crtc_cursor_set] cursor off [ 19.784703] [drm:drm_mode_getconnector] [CONNECTOR:14:?] [ 19.784708] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:eDP-1] [ 19.784712] [drm:intel_dp_detect] [CONNECTOR:14:eDP-1] [ 19.784715] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 19.784722] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 19.784885] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 19.785042] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 19.785053] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 19.785057] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:eDP-1] probed modes : [ 19.785060] [drm:drm_mode_debug_printmodeline] Modeline 15:"1920x1080" 60 141000 1920 1936 1952 2104 1080 1083 1097 1116 0x48 0xa [ 19.785062] [drm:drm_mode_debug_printmodeline] Modeline 16:"1920x1080" 40 94000 1920 1936 1952 2104 1080 1083 1097 1116 0x40 0xa [ 19.785066] [drm:drm_mode_getconnector] [CONNECTOR:14:?] [ 19.785162] [drm:drm_mode_getconnector] [CONNECTOR:23:?] [ 19.785164] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:DP-1] [ 19.785167] [drm:intel_dp_detect] [CONNECTOR:23:DP-1] [ 19.785455] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 01 00 15 01 83 02 00 00 00 00 00 04 [ 19.785456] [drm:intel_dp_get_dpcd] Displayport TPS3 supported [ 19.786135] [drm:intel_dp_probe_oui] Sink OUI: 000000 [ 19.786322] [drm:intel_dp_probe_oui] Branch OUI: 90cc24 [ 19.831143] [drm:drm_detect_monitor_audio] Monitor has basic audio support [ 19.873108] [drm:drm_edid_to_eld] ELD monitor DELL U2414H [ 19.873110] [drm:drm_edid_to_eld] ELD size 9, SAD count 1 [ 19.873121] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:DP-1] probed modes : [ 19.873124] [drm:drm_mode_debug_printmodeline] Modeline 30:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 19.873126] [drm:drm_mode_debug_printmodeline] Modeline 31:"3840x1080" 60 278100 3840 3884 3972 4120 1080 1084 1089 1125 0x40 0x5 [ 19.873129] [drm:drm_mode_debug_printmodeline] Modeline 32:"2560x1024" 60 189830 2560 2608 2720 2968 1024 1025 1028 1066 0x40 0x5 [ 19.873131] [drm:drm_mode_debug_printmodeline] Modeline 45:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 19.873133] [drm:drm_mode_debug_printmodeline] Modeline 36:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 19.873135] [drm:drm_mode_debug_printmodeline] Modeline 35:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x0 0x6 [ 19.873138] [drm:drm_mode_debug_printmodeline] Modeline 41:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 19.873140] [drm:drm_mode_debug_printmodeline] Modeline 34:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 19.873142] [drm:drm_mode_debug_printmodeline] Modeline 33:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 19.873144] [drm:drm_mode_debug_printmodeline] Modeline 42:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 19.873147] [drm:drm_mode_debug_printmodeline] Modeline 43:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 19.873149] [drm:drm_mode_debug_printmodeline] Modeline 44:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 19.873151] [drm:drm_mode_debug_printmodeline] Modeline 37:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 19.873153] [drm:drm_mode_debug_printmodeline] Modeline 38:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 19.873155] [drm:drm_mode_debug_printmodeline] Modeline 39:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 19.873158] [drm:drm_mode_debug_printmodeline] Modeline 46:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 19.873160] [drm:drm_mode_debug_printmodeline] Modeline 40:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 19.873171] [drm:drm_mode_getconnector] [CONNECTOR:23:?] [ 19.873205] [drm:drm_mode_getconnector] [CONNECTOR:24:?] [ 19.873207] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:24:HDMI-A-1] [ 19.873209] [drm:intel_hdmi_detect] [CONNECTOR:24:HDMI-A-1] [ 19.873366] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 19.873367] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 19.873369] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:24:HDMI-A-1] disconnected [ 19.873372] [drm:drm_mode_getconnector] [CONNECTOR:26:?] [ 19.873374] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:26:DP-2] [ 19.873376] [drm:intel_dp_detect] [CONNECTOR:26:DP-2] [ 19.873378] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:26:DP-2] disconnected [ 19.873380] [drm:drm_mode_getconnector] [CONNECTOR:27:?] [ 19.873381] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:27:HDMI-A-2] [ 19.873383] [drm:intel_hdmi_detect] [CONNECTOR:27:HDMI-A-2] [ 19.873537] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 19.873538] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 19.873540] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:27:HDMI-A-2] disconnected [ 19.874136] [drm:i915_gem_open] [ 19.889242] [drm:i915_gem_context_create_ioctl] HW context 1 created [ 19.892898] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed [ 19.895212] [drm:i915_gem_context_create_ioctl] HW context 1 created [ 19.927074] [drm:drm_mode_setcrtc] [CRTC:5] [ 19.927077] [drm:intel_crtc_set_config] [CRTC:5] [NOFB] [ 19.927079] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=0 [ 19.927081] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:DP-1] to [NOCRTC] [ 19.927081] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch [ 19.927083] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:8] [ 19.927084] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch [ 19.927085] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch [ 19.927086] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 1 [ 19.976998] [drm:intel_update_fbc] plane not A, disabling compression [ 19.977015] [drm:intel_connector_check_state] [CONNECTOR:14:eDP-1] [ 19.977019] [drm:check_encoder_state] [ENCODER:13:TMDS-13] [ 19.977022] [drm:check_encoder_state] [ENCODER:22:TMDS-22] [ 19.977024] [drm:check_encoder_state] [ENCODER:25:TMDS-25] [ 19.977026] [drm:check_crtc_state] [CRTC:5] [ 19.977029] [drm:check_crtc_state] [CRTC:8] [ 19.977036] [drm:check_crtc_state] [CRTC:11] [ 19.977562] [drm:drm_mode_addfb] [FB:52] [ 19.977566] [drm:drm_mode_setcrtc] [CRTC:8] [ 19.977569] [drm:drm_mode_setcrtc] [CONNECTOR:14:eDP-1] [ 19.977571] [drm:intel_crtc_set_config] [CRTC:8] [FB:50] #connectors=1 (x y) (0 0) [ 19.977573] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=1 [ 19.977575] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:8] [ 19.978866] [drm:ironlake_update_primary_plane] Writing base 00B7E000 00000000 0 0 7680 [ 19.988802] [drm:intel_edp_psr_match_conditions] PSR disable by flag [ 19.989438] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=0/937 [ 19.989440] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 19.989460] [drm:drm_mode_setcrtc] [CRTC:8] [ 19.989464] [drm:drm_mode_setcrtc] [CONNECTOR:23:DP-1] [ 19.989467] [drm:intel_crtc_set_config] [CRTC:8] [FB:50] #connectors=1 (x y) (0 0) [ 19.989470] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set [ 19.989473] [drm:drm_mode_debug_printmodeline] Modeline 51:"" 0 141000 1920 1936 1952 2104 1080 1083 1097 1116 0x0 0xa [ 19.989476] [drm:drm_mode_debug_printmodeline] Modeline 51:"" 0 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x0 0x5 [ 19.989479] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=1, fb_changed=0 [ 19.989481] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [NOCRTC] [ 19.989482] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch [ 19.989484] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch [ 19.989487] [drm:intel_modeset_stage_output_state] [CONNECTOR:23:DP-1] to [CRTC:8] [ 19.989488] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch [ 19.989490] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch [ 19.989493] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 19.989495] [drm:connected_sink_compute_bpp] [CONNECTOR:23:DP-1] checking for sink bpp constrains [ 19.989499] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 14 pixel clock 148500KHz [ 19.989503] [drm:intel_dp_compute_config] DP link bw 14 lane count 1 clock 540000 bpp 24 [ 19.989505] [drm:intel_dp_compute_config] DP link bw required 356400 available 432000 [ 19.989507] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 19.989510] [drm:intel_dump_pipe_config] [CRTC:8][modeset] config for pipe B [ 19.989511] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 19.989513] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 19.989516] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 19.989518] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6920601, gmch_n: 8388608, link_m: 288358, link_n: 1048576, tu: 64 [ 19.989520] [drm:intel_dump_pipe_config] requested mode: [ 19.989523] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x0 0x5 [ 19.989525] [drm:intel_dump_pipe_config] adjusted mode: [ 19.989527] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x0 0x5 [ 19.989530] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x0 flags: 0x5 [ 19.989532] [drm:intel_dump_pipe_config] port clock: 540000 [ 19.989534] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 19.989535] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 19.989538] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 19.989539] [drm:intel_dump_pipe_config] ips: 0 [ 19.989541] [drm:intel_dump_pipe_config] double wide: 0 [ 20.006782] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 20.006788] [drm:intel_edp_backlight_off] [ 20.022944] [drm:intel_edp_panel_off] Turn eDP power off [ 20.207713] [drm:wait_panel_off] Wait for panel power off time [ 20.207719] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 20.262687] [drm:wait_panel_status] Wait complete [ 20.262699] [drm:intel_update_fbc] no output, disabling [ 20.262723] [drm:ironlake_update_primary_plane] Writing base 00B7E000 00000000 0 0 7680 [ 20.262727] [drm:intel_edp_psr_match_conditions] PSR disable by flag [ 20.262729] [drm:intel_crtc_mode_set] [ENCODER:22:TMDS-22] set [MODE:0:] [ 20.262731] [drm:intel_ddi_mode_set] Preparing DDI mode on port B, pipe B [ 20.262732] [drm:intel_ddi_mode_set] DP audio on pipe B on DDI [ 20.262733] [drm:intel_ddi_mode_set] DP audio: write eld information [ 20.262735] [drm:intel_write_eld] ELD on [CONNECTOR:23:DP-1], [ENCODER:22:TMDS-22] [ 20.262736] [drm:haswell_write_eld] HDMI: Haswell Audio initialize.... [ 20.262737] [drm:haswell_write_eld] HDMI audio: enable codec [ 20.314668] [drm:g4x_wait_for_vblank] vblank wait timed out [ 20.314672] [drm:haswell_write_eld] HDMI audio: pin eld vld status=0x00000040 [ 20.314674] [drm:haswell_write_eld] HDMI audio: eld vld status=0x00000050 [ 20.314676] [drm:haswell_write_eld] HDMI audio: audio conf: 0x20800000 [ 20.314677] [drm:haswell_write_eld] ELD on pipe B [ 20.314678] [drm:haswell_write_eld] ELD: DisplayPort detected [ 20.314682] [drm:haswell_write_eld] port num:0 [ 20.314683] [drm:haswell_write_eld] ELD size 9 [ 20.316100] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 20.332524] [drm:intel_dp_start_link_train] clock recovery OK [ 20.350584] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful [ 20.368581] [drm:intel_update_fbc] plane not A, disabling compression [ 20.368588] [drm:intel_connector_check_state] [CONNECTOR:23:DP-1] [ 20.368592] [drm:check_encoder_state] [ENCODER:13:TMDS-13] [ 20.368594] [drm:check_encoder_state] [ENCODER:22:TMDS-22] [ 20.368596] [drm:check_encoder_state] [ENCODER:25:TMDS-25] [ 20.368597] [drm:check_crtc_state] [CRTC:5] [ 20.368599] [drm:check_crtc_state] [CRTC:8] [ 20.368606] [drm:check_crtc_state] [CRTC:11] [ 20.540247] wlo1: authenticate with 54:e6:fc:ae:60:3e [ 20.542237] wlo1: send auth to 54:e6:fc:ae:60:3e (try 1/3) [ 20.543892] wlo1: authenticated [ 20.544517] wlo1: associate with 54:e6:fc:ae:60:3e (try 1/3) [ 20.548530] wlo1: RX AssocResp from 54:e6:fc:ae:60:3e (capab=0x431 status=0 aid=5) [ 20.550208] wlo1: associated [ 20.550235] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 20.581649] Abgelehnt (INPUT): IN=enp0s25 OUT= MAC=ff:ff:ff:ff:ff:ff:80:86:f2:54:48:68:08:00 SRC=0.0.0.0 DST=255.255.255.255 LEN=376 TOS=0x00 PREC=0x00 TTL=64 ID=32909 PROTO=UDP SPT=68 DPT=67 LEN=356 [ 21.042565] [drm:drm_mode_getconnector] [CONNECTOR:14:?] [ 21.042569] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:eDP-1] [ 21.042572] [drm:intel_dp_detect] [CONNECTOR:14:eDP-1] [ 21.042575] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 21.042577] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 21.042580] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000 [ 21.042581] [drm:wait_panel_status] Wait complete [ 21.042586] [drm:_edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 21.042587] [drm:_edp_panel_vdd_on] eDP was not running [ 21.243522] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 21.243688] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 21.243702] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 21.243708] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:eDP-1] probed modes : [ 21.243712] [drm:drm_mode_debug_printmodeline] Modeline 15:"1920x1080" 60 141000 1920 1936 1952 2104 1080 1083 1097 1116 0x48 0xa [ 21.243716] [drm:drm_mode_debug_printmodeline] Modeline 16:"1920x1080" 40 94000 1920 1936 1952 2104 1080 1083 1097 1116 0x40 0xa [ 21.243735] [drm:drm_mode_getconnector] [CONNECTOR:14:?] [ 21.243870] [drm:drm_mode_getconnector] [CONNECTOR:23:?] [ 21.243874] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:DP-1] [ 21.243877] [drm:intel_dp_detect] [CONNECTOR:23:DP-1] [ 21.244173] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 01 00 15 01 83 02 00 00 00 00 00 04 [ 21.244175] [drm:intel_dp_get_dpcd] Displayport TPS3 supported [ 21.244852] [drm:intel_dp_probe_oui] Sink OUI: 000000 [ 21.245036] [drm:intel_dp_probe_oui] Branch OUI: 90cc24 [ 21.286932] [drm:drm_detect_monitor_audio] Monitor has basic audio support [ 21.328864] [drm:drm_edid_to_eld] ELD monitor DELL U2414H [ 21.328866] [drm:drm_edid_to_eld] ELD size 9, SAD count 1 [ 21.328876] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:DP-1] probed modes : [ 21.328879] [drm:drm_mode_debug_printmodeline] Modeline 30:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 21.328881] [drm:drm_mode_debug_printmodeline] Modeline 31:"3840x1080" 60 278100 3840 3884 3972 4120 1080 1084 1089 1125 0x40 0x5 [ 21.328884] [drm:drm_mode_debug_printmodeline] Modeline 32:"2560x1024" 60 189830 2560 2608 2720 2968 1024 1025 1028 1066 0x40 0x5 [ 21.328886] [drm:drm_mode_debug_printmodeline] Modeline 45:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 21.328888] [drm:drm_mode_debug_printmodeline] Modeline 36:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 21.328890] [drm:drm_mode_debug_printmodeline] Modeline 35:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x0 0x6 [ 21.328893] [drm:drm_mode_debug_printmodeline] Modeline 41:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 21.328895] [drm:drm_mode_debug_printmodeline] Modeline 34:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 21.328897] [drm:drm_mode_debug_printmodeline] Modeline 33:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 21.328899] [drm:drm_mode_debug_printmodeline] Modeline 42:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 21.328902] [drm:drm_mode_debug_printmodeline] Modeline 43:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 21.328904] [drm:drm_mode_debug_printmodeline] Modeline 44:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 21.328906] [drm:drm_mode_debug_printmodeline] Modeline 37:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 21.328908] [drm:drm_mode_debug_printmodeline] Modeline 38:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 21.328910] [drm:drm_mode_debug_printmodeline] Modeline 39:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 21.328913] [drm:drm_mode_debug_printmodeline] Modeline 46:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 21.328915] [drm:drm_mode_debug_printmodeline] Modeline 40:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 21.328923] [drm:drm_mode_getconnector] [CONNECTOR:23:?] [ 21.328948] [drm:drm_mode_getconnector] [CONNECTOR:24:?] [ 21.328949] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:24:HDMI-A-1] [ 21.328951] [drm:intel_hdmi_detect] [CONNECTOR:24:HDMI-A-1] [ 21.329108] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 21.329109] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 21.329111] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:24:HDMI-A-1] disconnected [ 21.329114] [drm:drm_mode_getconnector] [CONNECTOR:26:?] [ 21.329116] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:26:DP-2] [ 21.329117] [drm:intel_dp_detect] [CONNECTOR:26:DP-2] [ 21.329120] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:26:DP-2] disconnected [ 21.329121] [drm:drm_mode_getconnector] [CONNECTOR:27:?] [ 21.329123] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:27:HDMI-A-2] [ 21.329124] [drm:intel_hdmi_detect] [CONNECTOR:27:HDMI-A-2] [ 21.329284] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 21.329287] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 21.329289] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:27:HDMI-A-2] disconnected [ 21.769219] [drm:drm_mode_addfb] [FB:51] [ 21.923289] [drm:drm_mode_addfb] [FB:53] [ 22.786787] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 22.786795] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0000 [ 26.237233] [drm:drm_mode_addfb] [FB:52] [ 29.530232] [drm:intel_crtc_cursor_set] cursor off [ 33.529449] [drm:drm_mode_getconnector] [CONNECTOR:14:?] [ 33.529460] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:eDP-1] [ 33.529467] [drm:intel_dp_detect] [CONNECTOR:14:eDP-1] [ 33.529474] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 33.529479] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 33.529487] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000 [ 33.529491] [drm:wait_panel_status] Wait complete [ 33.529499] [drm:_edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 33.529503] [drm:_edp_panel_vdd_on] eDP was not running [ 33.730112] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 33.730308] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 33.730339] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 33.730351] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:eDP-1] probed modes : [ 33.730361] [drm:drm_mode_debug_printmodeline] Modeline 15:"1920x1080" 60 141000 1920 1936 1952 2104 1080 1083 1097 1116 0x48 0xa [ 33.730370] [drm:drm_mode_debug_printmodeline] Modeline 16:"1920x1080" 40 94000 1920 1936 1952 2104 1080 1083 1097 1116 0x40 0xa [ 33.730442] [drm:drm_mode_getconnector] [CONNECTOR:14:?] [ 33.730728] [drm:drm_mode_getconnector] [CONNECTOR:23:?] [ 33.730736] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:DP-1] [ 33.730744] [drm:intel_dp_detect] [CONNECTOR:23:DP-1] [ 33.731133] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 01 00 15 01 83 02 00 00 00 00 00 04 [ 33.731138] [drm:intel_dp_get_dpcd] Displayport TPS3 supported [ 33.731869] [drm:intel_dp_probe_oui] Sink OUI: 000000 [ 33.732076] [drm:intel_dp_probe_oui] Branch OUI: 90cc24 [ 33.777268] [drm:drm_detect_monitor_audio] Monitor has basic audio support [ 33.820863] [drm:drm_edid_to_eld] ELD monitor DELL U2414H [ 33.820864] [drm:drm_edid_to_eld] ELD size 9, SAD count 1 [ 33.820874] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:DP-1] probed modes : [ 33.820877] [drm:drm_mode_debug_printmodeline] Modeline 30:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 33.820879] [drm:drm_mode_debug_printmodeline] Modeline 31:"3840x1080" 60 278100 3840 3884 3972 4120 1080 1084 1089 1125 0x40 0x5 [ 33.820882] [drm:drm_mode_debug_printmodeline] Modeline 32:"2560x1024" 60 189830 2560 2608 2720 2968 1024 1025 1028 1066 0x40 0x5 [ 33.820884] [drm:drm_mode_debug_printmodeline] Modeline 45:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 33.820886] [drm:drm_mode_debug_printmodeline] Modeline 36:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 33.820889] [drm:drm_mode_debug_printmodeline] Modeline 35:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x0 0x6 [ 33.820891] [drm:drm_mode_debug_printmodeline] Modeline 41:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 33.820893] [drm:drm_mode_debug_printmodeline] Modeline 34:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 33.820895] [drm:drm_mode_debug_printmodeline] Modeline 33:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 33.820898] [drm:drm_mode_debug_printmodeline] Modeline 42:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 33.820900] [drm:drm_mode_debug_printmodeline] Modeline 43:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 33.820902] [drm:drm_mode_debug_printmodeline] Modeline 44:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 33.820905] [drm:drm_mode_debug_printmodeline] Modeline 37:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 33.820907] [drm:drm_mode_debug_printmodeline] Modeline 38:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 33.820909] [drm:drm_mode_debug_printmodeline] Modeline 39:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 33.820911] [drm:drm_mode_debug_printmodeline] Modeline 46:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 33.820914] [drm:drm_mode_debug_printmodeline] Modeline 40:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 33.820920] [drm:drm_mode_getconnector] [CONNECTOR:23:?] [ 33.820946] [drm:drm_mode_getconnector] [CONNECTOR:24:?] [ 33.820947] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:24:HDMI-A-1] [ 33.820949] [drm:intel_hdmi_detect] [CONNECTOR:24:HDMI-A-1] [ 33.821107] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 33.821108] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 33.821110] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:24:HDMI-A-1] disconnected [ 33.821113] [drm:drm_mode_getconnector] [CONNECTOR:26:?] [ 33.821115] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:26:DP-2] [ 33.821116] [drm:intel_dp_detect] [CONNECTOR:26:DP-2] [ 33.821119] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:26:DP-2] disconnected [ 33.821121] [drm:drm_mode_getconnector] [CONNECTOR:27:?] [ 33.821122] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:27:HDMI-A-2] [ 33.821124] [drm:intel_hdmi_detect] [CONNECTOR:27:HDMI-A-2] [ 33.821287] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 33.821288] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 33.821289] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:27:HDMI-A-2] disconnected [ 36.733759] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 36.733770] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0000