[ 6.750400] sp5100_tco: PCI Revision ID: 0x42 [ 6.750432] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address [ 6.750442] sp5100_tco: Last reboot was not triggered by watchdog. [ 6.750482] sp5100_tco: initialized (0xffffc90000c7eb00). heartbeat=60 sec (nowayout=0) [ 6.809526] [drm] radeon kernel modesetting enabled. [ 6.809598] checking generic (c0000000 300000) vs hw (c0000000 10000000) [ 6.809599] fb: conflicting fb hw usage radeondrmfb vs EFI VGA - removing generic driver [ 6.809635] Console: switching to colour dummy device 80x25 [ 6.809922] [drm] initializing kernel modesetting (VERDE 0x1002:0x683D 0x1043:0x043B). [ 6.809955] [drm] register mmio base: 0xFEA00000 [ 6.809956] [drm] register mmio size: 262144 [ 6.810027] ATOM BIOS: 683D.15.32.0.0.AS12 [ 6.810163] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used) [ 6.810166] radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF [ 6.810168] [drm] Detected VRAM RAM=2048M, BAR=256M [ 6.810169] [drm] RAM width 128bits DDR [ 6.810911] [TTM] Zone kernel: Available graphics memory: 4035720 kiB [ 6.810913] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 6.810914] [TTM] Initializing pool allocator [ 6.810918] [TTM] Initializing DMA pool allocator [ 6.810932] [drm] radeon: 2048M of VRAM memory ready [ 6.810934] [drm] radeon: 1024M of GTT memory ready. [ 6.810943] [drm] Loading VERDE Microcode [ 6.940986] hda-intel 0000:00:14.2: Using LPIB position fix [ 6.944448] hda-intel 0000:00:14.2: Enable sync_write for stable communication [ 6.976521] SKU: Nid=0x1d sku_cfg=0x4005e601 [ 6.976522] SKU: port_connectivity=0x1 [ 6.976524] SKU: enable_pcbeep=0x0 [ 6.976525] SKU: check_sum=0x00000005 [ 6.976525] SKU: customization=0x000000e6 [ 6.976526] SKU: external_amp=0x0 [ 6.976527] SKU: platform_type=0x0 [ 6.976528] SKU: swap=0x0 [ 6.976529] SKU: override=0x1 [ 6.976960] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 6.976962] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 6.976963] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 6.976964] mono: mono_out=0x0 [ 6.976965] dig-out=0x11/0x1e [ 6.976965] inputs: [ 6.976967] Front Mic=0x19 [ 6.976968] Rear Mic=0x18 [ 6.976969] Line=0x1a [ 6.976970] realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d [ 6.976971] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0887 [ 6.990567] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input12 [ 6.990640] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 [ 6.990705] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 [ 6.990767] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 6.990839] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 6.990907] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 6.990970] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 [ 6.991031] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5 [ 7.139159] asus_wmi: ASUS WMI generic driver loaded [ 7.140890] asus_wmi: Initialization: 0x0 [ 7.140916] asus_wmi: BIOS WMI version: 0.9 [ 7.140968] asus_wmi: SFUN value: 0x0 [ 7.141340] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input13 [ 7.142404] asus_wmi: Disabling ACPI video driver [ 7.167707] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 7.168731] [drm] probing gen 2 caps for device 1002:5a16 = 33ed02/0 [ 7.168735] [drm] PCIE gen 2 link speeds already enabled [ 7.176328] [drm] PCIE GART of 1024M enabled (table at 0x0000000000276000). [ 7.176425] radeon 0000:01:00.0: WB enabled [ 7.176428] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff880232725c00 [ 7.176430] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff880232725c04 [ 7.176431] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff880232725c08 [ 7.176433] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff880232725c0c [ 7.176435] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff880232725c10 [ 7.176924] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90011835a18 [ 7.176926] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 7.176927] [drm] Driver supports precise vblank timestamp query. [ 7.176946] radeon 0000:01:00.0: irq 87 for MSI/MSI-X [ 7.176956] radeon 0000:01:00.0: radeon: using MSI. [ 7.176982] [drm] radeon: irq initialized. [ 7.178840] hidraw: raw HID events driver (C) Jiri Kosina [ 7.189716] cfg80211: Calling CRDA to update world regulatory domain [ 7.208909] usbcore: registered new interface driver usbhid [ 7.208911] usbhid: USB HID core driver [ 7.264782] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.0/input/input14 [ 7.266829] hid-generic 0003:04F3:0103.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-0000:00:12.0-3/input0 [ 7.268460] input: ROCCAT ROCCAT Lua as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.0/input/input15 [ 7.268723] lua 0003:1E7D:2C2E.0003: input,hiddev0,hidraw1: USB HID v1.11 Mouse [ROCCAT ROCCAT Lua] on usb-0000:00:12.0-4/input0 [ 7.269024] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.1/input/input16 [ 7.270580] hid-generic 0003:04F3:0103.0002: input,hidraw2: USB HID v1.10 Device [HID 04f3:0103] on usb-0000:00:12.0-3/input1 [ 7.311565] input: Generic X-Box pad as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input17 [ 7.311657] usbcore: registered new interface driver xpad [ 7.330414] kvm: Nested Virtualization enabled [ 7.330419] kvm: Nested Paging enabled [ 7.334027] rtl8192cu: Chip version 0x11 [ 7.414296] rtl8192cu: MAC address: 00:0d:81:ac:6f:fd [ 7.414299] rtl8192cu: Board Type 0 [ 7.414486] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1 [ 7.414515] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin [ 7.414604] usbcore: registered new interface driver rtl8192cu [ 7.478452] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 7.478810] rtlwifi: wireless switch is on [ 7.604604] type=1400 audit(1403851227.552:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=447 comm="apparmor_parser" [ 7.604611] type=1400 audit(1403851227.552:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=447 comm="apparmor_parser" [ 7.604615] type=1400 audit(1403851227.552:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=447 comm="apparmor_parser" [ 7.604626] type=1400 audit(1403851227.552:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=436 comm="apparmor_parser" [ 7.604632] type=1400 audit(1403851227.552:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=436 comm="apparmor_parser" [ 7.604636] type=1400 audit(1403851227.552:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=436 comm="apparmor_parser" [ 7.604644] type=1400 audit(1403851227.552:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=587 comm="apparmor_parser" [ 7.604649] type=1400 audit(1403851227.552:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=587 comm="apparmor_parser" [ 7.604654] type=1400 audit(1403851227.552:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=587 comm="apparmor_parser" [ 7.604931] type=1400 audit(1403851227.552:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=436 comm="apparmor_parser" [ 7.664250] cfg80211: World regulatory domain updated: [ 7.664252] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 7.664254] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7.664255] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7.664257] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 7.664258] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7.664259] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7.698145] [drm] ring test on 0 succeeded in 1 usecs [ 7.698150] [drm] ring test on 1 succeeded in 1 usecs [ 7.698154] [drm] ring test on 2 succeeded in 1 usecs [ 7.698220] [drm] ring test on 3 succeeded in 4 usecs [ 7.698228] [drm] ring test on 4 succeeded in 1 usecs [ 7.884090] [drm] ring test on 5 succeeded in 2 usecs [ 7.884096] [drm] UVD initialized successfully. [ 7.885325] [drm] Enabling audio 0 support [ 7.885327] [drm] Enabling audio 1 support [ 7.885328] [drm] Enabling audio 2 support [ 7.885329] [drm] Enabling audio 3 support [ 7.885330] [drm] Enabling audio 4 support [ 7.885331] [drm] Enabling audio 5 support [ 7.885438] [drm] ib test on ring 0 succeeded in 0 usecs [ 7.885484] [drm] ib test on ring 1 succeeded in 0 usecs [ 7.885528] [drm] ib test on ring 2 succeeded in 0 usecs [ 7.885571] [drm] ib test on ring 3 succeeded in 0 usecs [ 7.885614] [drm] ib test on ring 4 succeeded in 1 usecs [ 8.036458] [drm] ib test on ring 5 succeeded [ 8.037168] [drm] Radeon Display Connectors [ 8.037169] [drm] Connector 0: [ 8.037170] [drm] DP-1 [ 8.037171] [drm] HPD4 [ 8.037173] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c [ 8.037174] [drm] Encoders: [ 8.037175] [drm] DFP1: INTERNAL_UNIPHY2 [ 8.037175] [drm] Connector 1: [ 8.037176] [drm] HDMI-A-1 [ 8.037177] [drm] HPD3 [ 8.037178] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c [ 8.037179] [drm] Encoders: [ 8.037180] [drm] DFP2: INTERNAL_UNIPHY2 [ 8.037180] [drm] Connector 2: [ 8.037181] [drm] DVI-D-1 [ 8.037182] [drm] HPD2 [ 8.037183] [drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c [ 8.037184] [drm] Encoders: [ 8.037185] [drm] DFP3: INTERNAL_UNIPHY1 [ 8.037186] [drm] Connector 3: [ 8.037186] [drm] DVI-I-1 [ 8.037187] [drm] HPD1 [ 8.037188] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c [ 8.037189] [drm] Encoders: [ 8.037190] [drm] DFP4: INTERNAL_UNIPHY [ 8.037191] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 8.037239] [drm] Internal thermal controller with fan control [ 8.037282] [drm] probing gen 2 caps for device 1002:5a16 = 33ed02/0 [ 8.707140] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro [ 9.406304] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null) [ 9.413867] [drm] radeon: dpm initialized [ 9.458508] [drm] fb mappable at 0xC1488000 [ 9.458510] [drm] vram apper at 0xC0000000 [ 9.458511] [drm] size 5324800 [ 9.458512] [drm] fb depth is 24 [ 9.458513] [drm] pitch is 5888 [ 9.458654] fbcon: radeondrmfb (fb0) is primary device [ 9.627855] init: failsafe main process (759) killed by TERM signal [ 10.150972] Console: switching to colour frame buffer device 180x56 [ 10.153233] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 10.153234] radeon 0000:01:00.0: registered panic notifier [ 10.153238] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0 [ 10.153282] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002) [ 10.153361] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client [ 10.153362] hda-intel 0000:01:00.1: Using LPIB position fix [ 10.153363] hda-intel 0000:01:00.1: Force to non-snoop mode [ 10.153398] snd_hda_intel 0000:01:00.1: irq 88 for MSI/MSI-X [ 10.157441] hda-intel 0000:01:00.1: Enable sync_write for stable communication [ 10.200158] HDMI ATI/AMD: no speaker allocation for ELD [ 10.200202] HDMI ATI/AMD: no speaker allocation for ELD [ 10.200248] HDMI ATI/AMD: no speaker allocation for ELD [ 10.200294] HDMI ATI/AMD: no speaker allocation for ELD [ 10.200342] HDMI ATI/AMD: no speaker allocation for ELD [ 10.200393] HDMI ATI/AMD: no speaker allocation for ELD [ 10.200515] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input23 [ 10.200628] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input22 [ 10.200699] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input21 [ 10.200763] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input20 [ 10.200825] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input19 [ 10.200886] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input18 [ 11.133297] init: avahi-cups-reload main process (871) terminated with status 1 [ 12.248035] Bluetooth: Core ver 2.17 [ 12.248056] NET: Registered protocol family 31 [ 12.248058] Bluetooth: HCI device and connection manager initialized [ 12.248064] Bluetooth: HCI socket layer initialized [ 12.248067] Bluetooth: L2CAP socket layer initialized [ 12.248071] Bluetooth: SCO socket layer initialized [ 12.383086] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.383088] Bluetooth: BNEP filters: protocol multicast [ 12.383093] Bluetooth: BNEP socket layer initialized [ 12.404715] Bluetooth: RFCOMM TTY layer initialized [ 12.404721] Bluetooth: RFCOMM socket layer initialized [ 12.404727] Bluetooth: RFCOMM ver 1.11 [ 15.043200] r8169 0000:02:00.0 eth0: link down [ 15.043265] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.043543] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.046943] rtl8192cu: MAC auto ON okay! [ 15.080115] rtl8192cu: Tx queue select: 0x05 [ 15.274786] init: samba-ad-dc main process (965) terminated with status 1 [ 15.326854] audit_printk_skb: 33 callbacks suppressed [ 15.326857] type=1400 audit(1403851235.264:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1039 comm="apparmor_parser" [ 15.326863] type=1400 audit(1403851235.264:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1039 comm="apparmor_parser" [ 15.326867] type=1400 audit(1403851235.264:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1039 comm="apparmor_parser" [ 15.327221] type=1400 audit(1403851235.264:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1039 comm="apparmor_parser" [ 15.327226] type=1400 audit(1403851235.264:27): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1039 comm="apparmor_parser" [ 15.327423] type=1400 audit(1403851235.264:28): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1039 comm="apparmor_parser" [ 15.333695] type=1400 audit(1403851235.272:29): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1045 comm="apparmor_parser" [ 15.333702] type=1400 audit(1403851235.272:30): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1045 comm="apparmor_parser" [ 15.334047] type=1400 audit(1403851235.272:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1045 comm="apparmor_parser" [ 15.337594] type=1400 audit(1403851235.276:32): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1037 comm="apparmor_parser" [ 15.459657] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 15.459935] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 16.251125] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 16.254753] vboxdrv: Found 6 processor cores. [ 16.255040] vboxdrv: fAsync=0 offMin=0x3f1 offMax=0x1ea24 [ 16.255123] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 16.255124] vboxdrv: Successfully loaded version 4.3.10_Ubuntu (interface 0x001a0007). [ 16.290298] wlan0: authenticate with 84:9c:a6:b0:88:e5 [ 16.306243] wlan0: direct probe to 84:9c:a6:b0:88:e5 (try 1/3) [ 16.399727] vboxpci: IOMMU not found (not registered) [ 16.510091] wlan0: send auth to 84:9c:a6:b0:88:e5 (try 2/3) [ 16.512934] wlan0: authenticated [ 16.514100] wlan0: associate with 84:9c:a6:b0:88:e5 (try 1/3) [ 16.532154] wlan0: RX AssocResp from 84:9c:a6:b0:88:e5 (capab=0x411 status=0 aid=1) [ 16.532221] wlan0: associated [ 16.532399] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 18.285539] init: plymouth-upstart-bridge main process ended, respawning ryan@ryan-desktop:~$ [drm] DVI-I-1 [ 8.037187] [drm] HPD1 [ 8.037188] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c [ 8.037189] [drm] Encoders: [ 8.037190] [drm] DFP4: INTERNAL_UNIPHY [ 8.037191] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 8.037239] [drm] Internal thermal controller with fan control [ 8.037282] [drm] probing gen 2 caps for device 1002:5a16 = 33ed02/0 [ 8.707140] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro [ 9.406304] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null) [ 9.413867] [drm] radeon: dpm initialized [ 9.458508] [drm] fb mappable at 0xC1488000 [ 9.458510] [drm] vram apper at 0xC0000000 [ 9.458511] [drm] size 5324800 [ 9.458512] [drm] fb depth is 24 [ 9.458513] [drm] pitch is 5888 [ 9.458654] fbcon: radeondrmfb (fb0) is primary device [ 9.627855] init: failsafe main process (759) killed by TERM signal [ 10.150972] Console: switching to colour frame buffer device 180x56 [ 10.153233] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 10.153234] radeon 0000:01:00.0: registered panic notifier [ 10.153238] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0 [ 10.153282] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002) [ 10.153361] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client [ 10.153362] hda-intel 0000:01:00.1: Using LPIB position fix [ 10.153363] hda-intel 0000:01:00.1: Force to non-snoop mode [ 10.153398] snd_hda_intel 0000:01:00.1: irq 88 for MSI/MSI-X [ 10.157441] hda-intel 0000:01:00.1: Enable sync_write for stable communication [ 10.200158] HDMI ATI/AMD: no speaker allocation for ELD [ 10.200202] HDMI ATI/AMD: no speaker allocation for ELD [ 10.200248] HDMI ATI/AMD: no speaker allocation for ELD [ 10.200294] HDMI ATI/AMD: no speaker allocation for ELD [ 10.200342] HDMI ATI/AMD: no speaker allocation for ELD [ 10.200393] HDMI ATI/AMD: no speaker allocation for ELD [ 10.200515] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input23 [ 10.200628] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input22 [ 10.200699] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input21 [ 10.200763] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input20 [ 10.200825] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input19 [ 10.200886] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input18 [ 11.133297] init: avahi-cups-reload main process (871) terminated with status 1 [ 12.248035] Bluetooth: Core ver 2.17 [ 12.248056] NET: Registered protocol family 31 [ 12.248058] Bluetooth: HCI device and connection manager initialized [ 12.248064] Bluetooth: HCI socket layer initialized [ 12.248067] Bluetooth: L2CAP socket layer initialized [ 12.248071] Bluetooth: SCO socket layer initialized [ 12.383086] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.383088] Bluetooth: BNEP filters: protocol multicast [ 12.383093] Bluetooth: BNEP socket layer initialized [ 12.404715] Bluetooth: RFCOMM TTY layer initialized [ 12.404721] Bluetooth: RFCOMM socket layer initialized [ 12.404727] Bluetooth: RFCOMM ver 1.11 [ 15.043200] r8169 0000:02:00.0 eth0: link down [ 15.043265] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.043543] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.046943] rtl8192cu: MAC auto ON okay! [ 15.080115] rtl8192cu: Tx queue select: 0x05 [ 15.274786] init: samba-ad-dc main process (965) terminated with status 1 [ 15.326854] audit_printk_skb: 33 callbacks suppressed [ 15.326857] type=1400 audit(1403851235.264:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1039 comm="apparmor_parser" [ 15.326863] type=1400 audit(1403851235.264:24): apparmor="STATUS" operation="profile_[drm]: command not found ryan@ryan-desktop:~$ [ 8.037187] [drm] HPD1 " name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1039 comm="apparmor_parser" -bash: [: missing `]' ryan@ryan-desktop:~$ name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1039 comm="apparmor_parser" [ 15.326867] type=1400 audit(1403851235.264:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1039 comm="apparmor_parser" ryan@ryan-desktop:~$ [ 15.326867] type=1400 audit(1403851235.264:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1039 comm="apparmor_parser" -bash: syntax error near unexpected token `(' [ 15.327221] type=1400 audit(1403851235.264:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1039 comm="apparmor_parser" ryan@ryan-desktop:~$ [ 15.327221] type=1400 audit(1403851235.264:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1039 comm="apparmor_parser" [ 15.327226] type=1400 audit(1403851235.264:27): apparmor=-bash: syntax error near unexpected token `(' "STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1039 comm="apparmor_parser" ryan@ryan-desktop:~$ [ 15.327226] type=1400 audit(1403851235.264:27): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1039 comm="apparmor_parser" [ 15.327423] type=1400 audit(1403851235.264:28): apparm-bash: syntax error near unexpected token `(' or="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1039 comm="apparmor_parser" ryan@ryan-desktop:~$ [ 15.327423] type=1400 audit(1403851235.264:28): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1039 comm="apparmor_parser" [ 15.333695] type=1-bash: syntax error near unexpected token `(' 400 audit(1403851235.272:29): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1045 comm="apparmor_parser" ryan@ryan-desktop:~$ [ 15.333695] type=1400 audit(1403851235.272:29): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1045 comm="apparmor_parser" [ 15.333702] type=1400 audit(1403851235.272:30): apparmor="STATUS" operation="profile_replace" pro-bash: syntax error near unexpected token `(' file="unconfined" name="/usr/sbin/cupsd" pid=1045 comm="apparmor_parser" ryan@ryan-desktop:~$ [ 15.333702] type=1400 audit(1403851235.272:30): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1045 comm="apparmor_parser" [ 15.334047] type=1400 audit(14-bash: syntax error near unexpected token `(' 03851235.272:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1045 comm="apparmor_parser" ryan@ryan-desktop:~$ [ 15.334047] type=1400 audit(1403851235.272:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1045 comm="apparmor_parser" [ 15.337594] type=1400 audit(1403851235.276:32): apparmor="STATUS"-bash: syntax error near unexpected token `(' operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1037 comm="apparmor_parser" ryan@ryan-desktop:~$ [ 15.337594] type=1400 audit(1403851235.276:32): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1037 comm="apparmor_parser" [ 15.459657] IP-bash: syntax error near unexpected token `(' v6: ADDRCONF(NETDEV_UP): wlan0: link is not ready ryan@ryan-desktop:~$ [ 15.459657] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 15.459935] IPv-bash: syntax error near unexpected token `(' 6: ADDRCONF(NETDEV_UP): wlan0: link is not ready ryan@ryan-desktop:~$ [ 15.459935] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ MI ATI/AMD: no speaker allocation for ELD [ 16.251125] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel MI: command not found ryan@ryan-desktop:~$ n failed: signature and/or required key missing - tainting kernel [ 16.254753] vboxdrv: Found 6 processor cores. n: command not found ryan@ryan-desktop:~$ [ 16.254753] vboxdrv: Found 6 processor cores. [ 16.255040] vboxdrv: fAsync=0 offMin=0x3f1 o-bash: [: missing `]' ffMax=0x1ea24 ryan@ryan-desktop:~$ [ 16.255040] vboxdrv: fAsync=0 offMin=0x3f1 offMax=0x1ea24 [ 16.255123-bash: [: missing `]' ] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. ryan@ryan-desktop:~$ [ 16.255123] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 16.255124] vboxdrv: Successfully loaded ve-bash: [: missing `]' rsion 4.3.10_Ubuntu (interface 0x001a0007). ryan@ryan-desktop:~$ [ 16.255124] vboxdrv: Successfully loaded version 4.3.10_Ubuntu (interface 0x001a0007). [ 16.2-bash: syntax error near unexpected token `(' 90298] wlan0: authenticate with 84:9c:a6:b0:88:e5 ryan@ryan-desktop:~$ [ 16.290298] wlan0: authenticate with 84:9c:a6:b0:88:e5 [ 16.30624-bash: [: missing `]' 3] wlan0: direct probe to 84:9c:a6:b0:88:e5 (try 1/3) ryan@ryan-desktop:~$ [ 16.306243] wlan0: direct probe to 84:9c:a6:b0:88:e5 (try 1/3) [ 16.399727] vboxpci: IOMMU not found (not registered-bash: syntax error near unexpected token `(' ) ryan@ryan-desktop:~$ [ 16.399727] vboxpci: IOMMU not found (not registered) [ 16.510091] wlan0: send auth to 84:9c:a6:b-bash: syntax error near unexpected token `(' 0:88:e5 (try 2/3) ryan@ryan-desktop:~$ [ 16.510091] wlan0: send auth to 84:9c:a6:b0:88:e5 (try 2/3) [ 16.512934] wlan0: authenticated -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 16.512934] wlan0: authenticated [ 16.514100] wlan0: associate with 84:9c:a6:b0:88:e5 (try 1/3) -bash: [: missing `]' ryan@ryan-desktop:~$ [ 16.514100] wlan0: associate with 84:9c:a6:b0:88:e5 (try 1/3) [ 16.532154] wlan0: RX AssocResp from 84:9c:a6:b0:88:e5 (capab=0x411 status=-bash: syntax error near unexpected token `(' 0 aid=1) ryan@ryan-desktop:~$ [ 16.532154] wlan0: RX AssocResp from 84:9c:a6:b0:88:e5 (capab=0x411 status=0 aid=1) -bash: syntax error near unexpected token `('[ 16.532221] wlan0: associated ryan@ryan-desktop:~$ [ 16.532221] wlan0: associated -bash: [: missing `]' [ 16.532399] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready ryan@ryan-desktop:~$ [ 16.532399] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready -bash: syntax error near unexpected token `(' [ 18.285539] init: plymouth-upstart-bridge main process ended, respawning ryan@ryan-desktop:~$ [ 18.285539] init: plymouth-upstart-bridge main process ended, respawning -bash: [: missing `]' ryan@ryan-desktop:~$ tatus 1 No command 'tatus' found, did you mean: Command 'status' from package 'upstart' (main) tatus: command not found ryan@ryan-desktop:~$ [ 12.248035] Bluetooth: Core ver 2.17 -bash: [: missing `]' ryan@ryan-desktop:~$ [ 12.248056] NET: Registered protocol family 31 -bash: [: missing `]' ryan@ryan-desktop:~$ [ 12.248058] Bluetooth: HCI device and connection manager initialized -bash: [: missing `]' ryan@ryan-desktop:~$ [ 12.248064] Bluetooth: HCI socket layer initialized -bash: [: missing `]' ryan@ryan-desktop:~$ [ 12.248067] Bluetooth: L2CAP socket layer initialized -bash: [: missing `]' ryan@ryan-desktop:~$ [ 12.248071] Bluetooth: SCO socket layer initialized -bash: [: missing `]' ryan@ryan-desktop:~$ [ 12.383086] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 12.383088] Bluetooth: BNEP filters: protocol multicast -bash: [: missing `]' ryan@ryan-desktop:~$ [ 12.383093] Bluetooth: BNEP socket layer initialized -bash: [: missing `]' ryan@ryan-desktop:~$ [ 12.404715] Bluetooth: RFCOMM TTY layer initialized -bash: [: missing `]' ryan@ryan-desktop:~$ [ 12.404721] Bluetooth: RFCOMM socket layer initialized -bash: [: missing `]' ryan@ryan-desktop:~$ [ 12.404727] Bluetooth: RFCOMM ver 1.11 -bash: [: missing `]' ryan@ryan-desktop:~$ [ 15.043200] r8169 0000:02:00.0 eth0: link down -bash: [: missing `]' ryan@ryan-desktop:~$ [ 15.043265] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 15.043543] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 15.046943] rtl8192cu: MAC auto ON okay! -bash: [: missing `]' ryan@ryan-desktop:~$ [ 15.080115] rtl8192cu: Tx queue select: 0x05 -bash: [: missing `]' ryan@ryan-desktop:~$ [ 15.274786] init: samba-ad-dc main process (965) terminated with status 1 -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 15.326854] audit_printk_skb: 33 callbacks suppressed -bash: [: missing `]' ryan@ryan-desktop:~$ [ 15.326857] type=1400 audit(1403851235.264:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1039 comm="apparmor_parser" -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 15.326863] type=1400 audit(1403851235.264:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1039 comm="apparmor_parser" -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 15.326867] type=1400 audit(1403851235.264:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1039 comm="apparmor_parser" -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 15.327221] type=1400 audit(1403851235.264:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1039 comm="apparmor_parser" -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 15.327226] type=1400 audit(1403851235.264:27): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1039 comm="apparmor_parser" -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 15.327423] type=1400 audit(1403851235.264:28): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1039 comm="apparmor_parser" -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 15.333695] type=1400 audit(1403851235.272:29): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1045 comm="apparmor_parser" -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 15.333702] type=1400 audit(1403851235.272:30): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1045 comm="apparmor_parser" -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 15.334047] type=1400 audit(1403851235.272:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1045 comm="apparmor_parser" -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 15.337594] type=1400 audit(1403851235.276:32): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1037 comm="apparmor_parser" -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 15.459657] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 15.459935] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 16.251125] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel -bash: [: missing `]' ryan@ryan-desktop:~$ [ 16.254753] vboxdrv: Found 6 processor cores. -bash: [: missing `]' ryan@ryan-desktop:~$ [ 16.255040] vboxdrv: fAsync=0 offMin=0x3f1 offMax=0x1ea24 -bash: [: missing `]' ryan@ryan-desktop:~$ [ 16.255123] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. -bash: [: missing `]' ryan@ryan-desktop:~$ [ 16.255124] vboxdrv: Successfully loaded version 4.3.10_Ubuntu (interface 0x001a0007). -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 16.290298] wlan0: authenticate with 84:9c:a6:b0:88:e5 -bash: [: missing `]' ryan@ryan-desktop:~$ [ 16.306243] wlan0: direct probe to 84:9c:a6:b0:88:e5 (try 1/3) -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 16.399727] vboxpci: IOMMU not found (not registered) -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 16.510091] wlan0: send auth to 84:9c:a6:b0:88:e5 (try 2/3) -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 16.512934] wlan0: authenticated -bash: [: missing `]' ryan@ryan-desktop:~$ [ 16.514100] wlan0: associate with 84:9c:a6:b0:88:e5 (try 1/3) -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 16.532154] wlan0: RX AssocResp from 84:9c:a6:b0:88:e5 (capab=0x411 status=0 aid=1) -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 16.532221] wlan0: associated -bash: [: missing `]' ryan@ryan-desktop:~$ [ 16.532399] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 18.285539] init: plymouth-upstart-bridge main process ended, respawning -bash: [: missing `]' ryan@ryan-desktop:~$ [drm] DVI-I-1 [ 8.037187] [drm] HPD1 [ 8.037188] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c [ 8.037189] [drm] Encoders: [ 8.037190] [drm] DFP4: INTERNAL_UNIPHY [ 8.037191] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 8.037239] [drm] Internal thermal controller with fan control [ 8.037282] [drm] probing gen 2 caps for device 1002:5a16 = 33ed02/0 [ 8.707140] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro [ 9.406304] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null) [ 9.413867] [drm] radeon: dpm initialized [ 9.458508] [drm] fb mappable at 0xC1488000 [ 9.458510] [drm] vram apper at 0xC0000000 [ 9.458511] [drm] size 5324800 [ 9.458512] [drm] fb depth is 24 [ 9.458513] [drm] pitch is 5888 [ 9.458654] fbcon: radeondrmfb (fb0) is primary device [drm]: command not found ryan@ryan-desktop:~$ [ 8.037187] [drm] HPD1 -bash: [: missing `]' ryan@ryan-desktop:~$ [ 8.037188] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c -bash: [: missing `]' ryan@ryan-desktop:~$ [ 8.037189] [drm] Encoders: [ 9.627855] init: failsafe main process (759) killed by TERM signal -bash: [: missing `]' ryan@ryan-desktop:~$ [ 8.037190] [drm] DFP4: INTERNAL_UNIPHY [ 10.150972] Console: switching to colour frame buffer device 180x56 -bash: [: missing `]' ryan@ryan-desktop:~$ [ 8.037191] [drm] CRT1: INTERNAL_KLDSCP_DAC1 -bash: [: missing `]' ryan@ryan-desktop:~$ [ 8.037239] [drm] Internal thermal controller with fan control -bash: [: missing `]' ryan@ryan-desktop:~$ [ 8.037282] [drm] probing gen 2 caps for device 1002:5a16 = 33ed02/0 -bash: [: missing `]' ryan@ryan-desktop:~$ [ 8.707140] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 9.406304] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null) -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 9.413867] [drm] radeon: dpm initialized -bash: [: missing `]' ryan@ryan-desktop:~$ [ 9.458508] [drm] fb mappable at 0xC1488000 -bash: [: missing `]' ryan@ryan-desktop:~$ [ 9.458510] [drm] vram apper at 0xC0000000 -bash: [: missing `]' ryan@ryan-desktop:~$ [ 9.458511] [drm] size 5324800 -bash: [: missing `]' ryan@ryan-desktop:~$ [ 9.458512] [drm] fb depth is 24 -bash: [: missing `]' ryan@ryan-desktop:~$ [ 9.458513] [drm] pitch is 5888 -bash: [: missing `]' ryan@ryan-desktop:~$ [ 9.458654] fbcon: radeondrmfb (fb0) is primary device -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 9.627855] init: failsafe main process (759) killed by TERM signal -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 10.150972] Console: switching to colour frame buffer device 180x56 -bash: [: missing `]' ryan@ryan-desktop:~$ [ 10.153233] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device -bash: [: missing `]' ryan@ryan-desktop:~$ [ 10.153234] radeon 0000:01:00.0: registered panic notifier -bash: [: missing `]' ryan@ryan-desktop:~$ [ 10.153238] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0 -bash: [: missing `]' [ 10.153361] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client ryan@ryan-desktop:~$ [ 10.153282] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002) -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 10.153361] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client -bash: [: missing `]' ryan@ryan-desktop:~$ [ 10.153362] hda-intel 0000:01:00.1: Using LPIB position fix -bash: [: missing `]' ryan@ryan-desktop:~$ [ 10.153363] hda-intel 0000:01:00.1: Force to non-snoop mode -bash: [: missing `]' ryan@ryan-desktop:~$ [ 10.153398] snd_hda_intel 0000:01:00.1: irq 88 for MSI/MSI-X -bash: [: missing `]' ryan@ryan-desktop:~$ [ 10.157441] hda-intel 0000:01:00.1: Enable sync_write for stable communication -bash: [: missing `]' ryan@ryan-desktop:~$ [ 10.200158] HDMI ATI/AMD: no speaker allocation for ELD -bash: [: missing `]' ryan@ryan-desktop:~$ [ 10.200202] HDMI ATI/AMD: no speaker allocation for ELD -bash: [: missing `]' ryan@ryan-desktop:~$ [ 10.200248] HDMI ATI/AMD: no speaker allocation for ELD -bash: [: missing `]' ryan@ryan-desktop:~$ [ 10.200294] HDMI ATI/AMD: no speaker allocation for ELD -bash: [: missing `]' ryan@ryan-desktop:~$ [ 10.200342] HDMI ATI/AMD: no speaker allocation for ELD -bash: [: missing `]' ryan@ryan-desktop:~$ [ 10.200393] HDMI ATI/AMD: no speaker allocation for ELD -bash: [: missing `]' ryan@ryan-desktop:~$ [ 10.200515] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input23 -bash: [: missing `]' ryan@ryan-desktop:~$ [ 10.200628] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input22 -bash: [: missing `]' ryan@ryan-desktop:~$ [ 10.200699] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input21 -bash: [: missing `]' ryan@ryan-desktop:~$ [ 10.200763] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input20 -bash: [: missing `]' ryan@ryan-desktop:~$ [ 10.200825] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input19 -bash: [: missing `]' ryan@ryan-desktop:~$ [ 10.200886] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input18 -bash: [: missing `]' ryan@ryan-desktop:~$ [ 11.133297] init: avahi-cups-reload main process (871) terminated with status 1 -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 12.248035] Bluetooth: Core ver 2.17 -bash: [: missing `]' ryan@ryan-desktop:~$ [ 12.248056] NET: Registered protocol family 31 -bash: [: missing `]' [ 12.248058] Bluetooth: HCI device and connection manager initialized ryan@ryan-desktop:~$ [ 12.248058] Bluetooth: HCI device and connection manager initialized -bash: [: missing `]' ryan@ryan-desktop:~$ [ 12.248064] Bluetooth: HCI socket layer initialized -bash: [: missing `]' ryan@ryan-desktop:~$ [ 12.248067] Bluetooth: L2CAP socket layer initialized -bash: [: missing `]' ryan@ryan-desktop:~$ [ 12.248071] Bluetooth: SCO socket layer initialized -bash: [: missing `]' ryan@ryan-desktop:~$ [ 12.383086] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 12.383088] Bluetooth: BNEP filters: protocol multicast -bash: [: missing `]' ryan@ryan-desktop:~$ [ 12.383093] Bluetooth: BNEP socket layer initialized -bash: [: missing `]' ryan@ryan-desktop:~$ [ 12.404715] Bluetooth: RFCOMM TTY layer initialized -bash: [: missing `]' ryan@ryan-desktop:~$ [ 12.404721] Bluetooth: RFCOMM socket layer initialized -bash: [: missing `]' ryan@ryan-desktop:~$ [ 12.404727] Bluetooth: RFCOMM ver 1.11 -bash: [: missing `]' ryan@ryan-desktop:~$ [ 15.043200] r8169 0000:02:00.0 eth0: link down -bash: [: missing `]' ryan@ryan-desktop:~$ [ 15.043265] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 15.043543] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 15.046943] rtl8192cu: MAC auto ON okay! -bash: [: missing `]' ryan@ryan-desktop:~$ [ 15.080115] rtl8192cu: Tx queue select: 0x05 -bash: [: missing `]' ryan@ryan-desktop:~$ [ 15.274786] init: samba-ad-dc main process (965) terminated with status 1 -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 15.326854] audit_printk_skb: 33 callbacks suppressed -bash: [: missing `]' ryan@ryan-desktop:~$ [ 15.326857] type=1400 audit(1403851235.264:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1039 comm="apparmor_parser" -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 15.326863] type=1400 audit(1403851235.264:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1039 comm="apparmor_parser" -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 15.326867] type=1400 audit(1403851235.264:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1039 comm="apparmor_parser" -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 15.327221] type=1400 audit(1403851235.264:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1039 comm="apparmor_parser" -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 15.327226] type=1400 audit(1403851235.264:27): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1039 comm="apparmor_parser" -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 15.327423] type=1400 audit(1403851235.264:28): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1039 comm="apparmor_parser" -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 15.333695] type=1400 audit(1403851235.272:29): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1045 comm="apparmor_parser" -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 15.333702] type=1400 audit(1403851235.272:30): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1045 comm="apparmor_parser" -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 15.334047] type=1400 audit(1403851235.272:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1045 comm="apparmor_parser" -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 15.337594] type=1400 audit(1403851235.276:32): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1037 comm="apparmor_parser" -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 15.459657] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 15.459935] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 16.251125] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel -bash: [: missing `]' ryan@ryan-desktop:~$ [ 16.254753] vboxdrv: Found 6 processor cores. -bash: [: missing `]' ryan@ryan-desktop:~$ [ 16.255040] vboxdrv: fAsync=0 offMin=0x3f1 offMax=0x1ea24 -bash: [: missing `]' ryan@ryan-desktop:~$ [ 16.255123] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. -bash: [: missing `]' ryan@ryan-desktop:~$ [ 16.255124] vboxdrv: Successfully loaded version 4.3.10_Ubuntu (interface 0x001a0007). -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 16.290298] wlan0: authenticate with 84:9c:a6:b0:88:e5 -bash: [: missing `]' ryan@ryan-desktop:~$ [ 16.306243] wlan0: direct probe to 84:9c:a6:b0:88:e5 (try 1/3) -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 16.399727] vboxpci: IOMMU not found (not registered) -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 16.510091] wlan0: send auth to 84:9c:a6:b0:88:e5 (try 2/3) -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 16.512934] wlan0: authenticated -bash: [: missing `]' ryan@ryan-desktop:~$ [ 16.514100] wlan0: associate with 84:9c:a6:b0:88:e5 (try 1/3) -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 16.532154] wlan0: RX AssocResp from 84:9c:a6:b0:88:e5 (capab=0x411 status=0 aid=1) -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 16.532221] wlan0: associated -bash: [: missing `]' ryan@ryan-desktop:~$ [ 16.532399] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready -bash: syntax error near unexpected token `(' ryan@ryan-desktop:~$ [ 18.285539] init: plymouth-upstart-bridge main process ended, respawning -bash: [: missing `]' ryan@ryan-desktop:~$ clear ryan@ryan-desktop:~$ dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-30-generic (buildd@allspice) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #54-Ubuntu SMP Mon Jun 9 22:45:01 UTC 2014 (Ubuntu 3.13.0-30.54-generic 3.13.11.2) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-30-generic.efi.signed root=UUID=ca3ab141-9b59-484e-85d6-0d2813f68039 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ba4adfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ba4ae000-0x00000000ba789fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ba78a000-0x00000000ba799fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000ba79a000-0x00000000bb87ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bb880000-0x00000000bca35fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bca36000-0x00000000bca36fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bca37000-0x00000000bcc3cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bcc3d000-0x00000000bd082fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bd083000-0x00000000bd7f3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bd7f4000-0x00000000bd7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000023effffff] usable [ 0.000000] e820: update [mem 0x7db26018-0x7db36057] usable ==> usable [ 0.000000] e820: update [mem 0x7db19018-0x7db25857] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000007db19017] usable [ 0.000000] reserve setup_data: [mem 0x000000007db19018-0x000000007db25857] usable [ 0.000000] reserve setup_data: [mem 0x000000007db25858-0x000000007db26017] usable [ 0.000000] reserve setup_data: [mem 0x000000007db26018-0x000000007db36057] usable [ 0.000000] reserve setup_data: [mem 0x000000007db36058-0x00000000ba4adfff] usable [ 0.000000] reserve setup_data: [mem 0x00000000ba4ae000-0x00000000ba789fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ba78a000-0x00000000ba799fff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000ba79a000-0x00000000bb87ffff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000bb880000-0x00000000bca35fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000bca36000-0x00000000bca36fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000bca37000-0x00000000bcc3cfff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000bcc3d000-0x00000000bd082fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000bd083000-0x00000000bd7f3fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000bd7f4000-0x00000000bd7fffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed61000-0x00000000fed70fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fef00000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100001000-0x000000023effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.10 by American Megatrends [ 0.000000] efi: ACPI=0xba791000 ACPI 2.0=0xba791000 SMBIOS=0xf04c0 [ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB) [ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000008000-0x0000000000009000) (0MB) [ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000009000-0x000000000005f000) (0MB) [ 0.000000] efi: mem03: type=4, attr=0xf, range=[0x000000000005f000-0x0000000000060000) (0MB) [ 0.000000] efi: mem04: type=3, attr=0xf, range=[0x0000000000060000-0x00000000000a0000) (0MB) [ 0.000000] efi: mem05: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB) [ 0.000000] efi: mem06: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001100000) (1MB) [ 0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000001100000-0x0000000002000000) (15MB) [ 0.000000] efi: mem08: type=2, attr=0xf, range=[0x0000000002000000-0x0000000003400000) (20MB) [ 0.000000] efi: mem09: type=7, attr=0xf, range=[0x0000000003400000-0x000000003d9b9000) (933MB) [ 0.000000] efi: mem10: type=2, attr=0xf, range=[0x000000003d9b9000-0x0000000040000000) (38MB) [ 0.000000] efi: mem11: type=7, attr=0xf, range=[0x0000000040000000-0x000000007db19000) (987MB) [ 0.000000] efi: mem12: type=2, attr=0xf, range=[0x000000007db19000-0x00000000a90be000) (693MB) [ 0.000000] efi: mem13: type=7, attr=0xf, range=[0x00000000a90be000-0x00000000a90c4000) (0MB) [ 0.000000] efi: mem14: type=2, attr=0xf, range=[0x00000000a90c4000-0x00000000a91af000) (0MB) [ 0.000000] efi: mem15: type=7, attr=0xf, range=[0x00000000a91af000-0x00000000a91b0000) (0MB) [ 0.000000] efi: mem16: type=2, attr=0xf, range=[0x00000000a91b0000-0x00000000a91b4000) (0MB) [ 0.000000] efi: mem17: type=7, attr=0xf, range=[0x00000000a91b4000-0x00000000a91b5000) (0MB) [ 0.000000] efi: mem18: type=2, attr=0xf, range=[0x00000000a91b5000-0x00000000a91b6000) (0MB) [ 0.000000] efi: mem19: type=7, attr=0xf, range=[0x00000000a91b6000-0x00000000a91bb000) (0MB) [ 0.000000] efi: mem20: type=2, attr=0xf, range=[0x00000000a91bb000-0x00000000a91c1000) (0MB) [ 0.000000] efi: mem21: type=7, attr=0xf, range=[0x00000000a91c1000-0x00000000a91c3000) (0MB) [ 0.000000] efi: mem22: type=2, attr=0xf, range=[0x00000000a91c3000-0x00000000a91c4000) (0MB) [ 0.000000] efi: mem23: type=7, attr=0xf, range=[0x00000000a91c4000-0x00000000a91c5000) (0MB) [ 0.000000] efi: mem24: type=2, attr=0xf, range=[0x00000000a91c5000-0x00000000a92b2000) (0MB) [ 0.000000] efi: mem25: type=1, attr=0xf, range=[0x00000000a92b2000-0x00000000a93e6000) (1MB) [ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x00000000a93e6000-0x00000000ad077000) (60MB) [ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x00000000ad077000-0x00000000ad09a000) (0MB) [ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x00000000ad09a000-0x00000000ad0a2000) (0MB) [ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x00000000ad0a2000-0x00000000ad0c5000) (0MB) [ 0.000000] efi: mem30: type=7, attr=0xf, range=[0x00000000ad0c5000-0x00000000ad0ce000) (0MB) [ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x00000000ad0ce000-0x00000000ad0f3000) (0MB) [ 0.000000] efi: mem32: type=7, attr=0xf, range=[0x00000000ad0f3000-0x00000000ad0ff000) (0MB) [ 0.000000] efi: mem33: type=4, attr=0xf, range=[0x00000000ad0ff000-0x00000000ad137000) (0MB) [ 0.000000] efi: mem34: type=7, attr=0xf, range=[0x00000000ad137000-0x00000000ad14b000) (0MB) [ 0.000000] efi: mem35: type=4, attr=0xf, range=[0x00000000ad14b000-0x00000000ad16d000) (0MB) [ 0.000000] efi: mem36: type=7, attr=0xf, range=[0x00000000ad16d000-0x00000000ad17d000) (0MB) [ 0.000000] efi: mem37: type=4, attr=0xf, range=[0x00000000ad17d000-0x00000000ad1a6000) (0MB) [ 0.000000] efi: mem38: type=7, attr=0xf, range=[0x00000000ad1a6000-0x00000000ad1ba000) (0MB) [ 0.000000] efi: mem39: type=4, attr=0xf, range=[0x00000000ad1ba000-0x00000000ad1ef000) (0MB) [ 0.000000] efi: mem40: type=7, attr=0xf, range=[0x00000000ad1ef000-0x00000000ad204000) (0MB) [ 0.000000] efi: mem41: type=4, attr=0xf, range=[0x00000000ad204000-0x00000000ad25d000) (0MB) [ 0.000000] efi: mem42: type=7, attr=0xf, range=[0x00000000ad25d000-0x00000000ad27c000) (0MB) [ 0.000000] efi: mem43: type=4, attr=0xf, range=[0x00000000ad27c000-0x00000000ad29f000) (0MB) [ 0.000000] efi: mem44: type=7, attr=0xf, range=[0x00000000ad29f000-0x00000000ad2a7000) (0MB) [ 0.000000] efi: mem45: type=4, attr=0xf, range=[0x00000000ad2a7000-0x00000000ad2c8000) (0MB) [ 0.000000] efi: mem46: type=7, attr=0xf, range=[0x00000000ad2c8000-0x00000000ad2d1000) (0MB) [ 0.000000] efi: mem47: type=4, attr=0xf, range=[0x00000000ad2d1000-0x00000000ad2f7000) (0MB) [ 0.000000] efi: mem48: type=7, attr=0xf, range=[0x00000000ad2f7000-0x00000000ad303000) (0MB) [ 0.000000] efi: mem49: type=4, attr=0xf, range=[0x00000000ad303000-0x00000000ad33b000) (0MB) [ 0.000000] efi: mem50: type=7, attr=0xf, range=[0x00000000ad33b000-0x00000000ad34f000) (0MB) [ 0.000000] efi: mem51: type=4, attr=0xf, range=[0x00000000ad34f000-0x00000000ad371000) (0MB) [ 0.000000] efi: mem52: type=7, attr=0xf, range=[0x00000000ad371000-0x00000000ad381000) (0MB) [ 0.000000] efi: mem53: type=4, attr=0xf, range=[0x00000000ad381000-0x00000000ad3ab000) (0MB) [ 0.000000] efi: mem54: type=7, attr=0xf, range=[0x00000000ad3ab000-0x00000000ad3bf000) (0MB) [ 0.000000] efi: mem55: type=4, attr=0xf, range=[0x00000000ad3bf000-0x00000000ad3f2000) (0MB) [ 0.000000] efi: mem56: type=7, attr=0xf, range=[0x00000000ad3f2000-0x00000000ad407000) (0MB) [ 0.000000] efi: mem57: type=4, attr=0xf, range=[0x00000000ad407000-0x00000000ad45e000) (0MB) [ 0.000000] efi: mem58: type=7, attr=0xf, range=[0x00000000ad45e000-0x00000000ad47d000) (0MB) [ 0.000000] efi: mem59: type=4, attr=0xf, range=[0x00000000ad47d000-0x00000000ad4a3000) (0MB) [ 0.000000] efi: mem60: type=7, attr=0xf, range=[0x00000000ad4a3000-0x00000000ad4ab000) (0MB) [ 0.000000] efi: mem61: type=4, attr=0xf, range=[0x00000000ad4ab000-0x00000000ad4ce000) (0MB) [ 0.000000] efi: mem62: type=7, attr=0xf, range=[0x00000000ad4ce000-0x00000000ad4d7000) (0MB) [ 0.000000] efi: mem63: type=4, attr=0xf, range=[0x00000000ad4d7000-0x00000000ad4fb000) (0MB) [ 0.000000] efi: mem64: type=7, attr=0xf, range=[0x00000000ad4fb000-0x00000000ad507000) (0MB) [ 0.000000] efi: mem65: type=4, attr=0xf, range=[0x00000000ad507000-0x00000000ad540000) (0MB) [ 0.000000] efi: mem66: type=7, attr=0xf, range=[0x00000000ad540000-0x00000000ad554000) (0MB) [ 0.000000] efi: mem67: type=4, attr=0xf, range=[0x00000000ad554000-0x00000000ad576000) (0MB) [ 0.000000] efi: mem68: type=7, attr=0xf, range=[0x00000000ad576000-0x00000000ad586000) (0MB) [ 0.000000] efi: mem69: type=4, attr=0xf, range=[0x00000000ad586000-0x00000000ad5af000) (0MB) [ 0.000000] efi: mem70: type=7, attr=0xf, range=[0x00000000ad5af000-0x00000000ad5c3000) (0MB) [ 0.000000] efi: mem71: type=4, attr=0xf, range=[0x00000000ad5c3000-0x00000000ad5ea000) (0MB) [ 0.000000] efi: mem72: type=7, attr=0xf, range=[0x00000000ad5ea000-0x00000000ad5ff000) (0MB) [ 0.000000] efi: mem73: type=4, attr=0xf, range=[0x00000000ad5ff000-0x00000000ad600000) (0MB) [ 0.000000] efi: mem74: type=7, attr=0xf, range=[0x00000000ad600000-0x00000000ad685000) (0MB) [ 0.000000] efi: mem75: type=4, attr=0xf, range=[0x00000000ad685000-0x00000000ad6a9000) (0MB) [ 0.000000] efi: mem76: type=7, attr=0xf, range=[0x00000000ad6a9000-0x00000000ad6b1000) (0MB) [ 0.000000] efi: mem77: type=4, attr=0xf, range=[0x00000000ad6b1000-0x00000000ad6d4000) (0MB) [ 0.000000] efi: mem78: type=7, attr=0xf, range=[0x00000000ad6d4000-0x00000000ad6dd000) (0MB) [ 0.000000] efi: mem79: type=4, attr=0xf, range=[0x00000000ad6dd000-0x00000000ad702000) (0MB) [ 0.000000] efi: mem80: type=7, attr=0xf, range=[0x00000000ad702000-0x00000000ad70e000) (0MB) [ 0.000000] efi: mem81: type=4, attr=0xf, range=[0x00000000ad70e000-0x00000000ad748000) (0MB) [ 0.000000] efi: mem82: type=7, attr=0xf, range=[0x00000000ad748000-0x00000000ad75c000) (0MB) [ 0.000000] efi: mem83: type=4, attr=0xf, range=[0x00000000ad75c000-0x00000000ad77e000) (0MB) [ 0.000000] efi: mem84: type=7, attr=0xf, range=[0x00000000ad77e000-0x00000000ad78e000) (0MB) [ 0.000000] efi: mem85: type=4, attr=0xf, range=[0x00000000ad78e000-0x00000000ad7b6000) (0MB) [ 0.000000] efi: mem86: type=7, attr=0xf, range=[0x00000000ad7b6000-0x00000000ad7ca000) (0MB) [ 0.000000] efi: mem87: type=4, attr=0xf, range=[0x00000000ad7ca000-0x00000000ad7fd000) (0MB) [ 0.000000] efi: mem88: type=7, attr=0xf, range=[0x00000000ad7fd000-0x00000000ad812000) (0MB) [ 0.000000] efi: mem89: type=4, attr=0xf, range=[0x00000000ad812000-0x00000000ad8b0000) (0MB) [ 0.000000] efi: mem90: type=7, attr=0xf, range=[0x00000000ad8b0000-0x00000000ad8b8000) (0MB) [ 0.000000] efi: mem91: type=4, attr=0xf, range=[0x00000000ad8b8000-0x00000000ad8dd000) (0MB) [ 0.000000] efi: mem92: type=7, attr=0xf, range=[0x00000000ad8dd000-0x00000000ad8e6000) (0MB) [ 0.000000] efi: mem93: type=4, attr=0xf, range=[0x00000000ad8e6000-0x00000000ad90c000) (0MB) [ 0.000000] efi: mem94: type=7, attr=0xf, range=[0x00000000ad90c000-0x00000000ad918000) (0MB) [ 0.000000] efi: mem95: type=4, attr=0xf, range=[0x00000000ad918000-0x00000000ad94e000) (0MB) [ 0.000000] efi: mem96: type=7, attr=0xf, range=[0x00000000ad94e000-0x00000000ad962000) (0MB) [ 0.000000] efi: mem97: type=4, attr=0xf, range=[0x00000000ad962000-0x00000000ad985000) (0MB) [ 0.000000] efi: mem98: type=7, attr=0xf, range=[0x00000000ad985000-0x00000000ad995000) (0MB) [ 0.000000] efi: mem99: type=4, attr=0xf, range=[0x00000000ad995000-0x00000000ad9be000) (0MB) [ 0.000000] efi: mem100: type=7, attr=0xf, range=[0x00000000ad9be000-0x00000000ad9d2000) (0MB) [ 0.000000] efi: mem101: type=4, attr=0xf, range=[0x00000000ad9d2000-0x00000000adc36000) (2MB) [ 0.000000] efi: mem102: type=7, attr=0xf, range=[0x00000000adc36000-0x00000000adc37000) (0MB) [ 0.000000] efi: mem103: type=4, attr=0xf, range=[0x00000000adc37000-0x00000000adc4c000) (0MB) [ 0.000000] efi: mem104: type=7, attr=0xf, range=[0x00000000adc4c000-0x00000000ade59000) (2MB) [ 0.000000] efi: mem105: type=4, attr=0xf, range=[0x00000000ade59000-0x00000000ae244000) (3MB) [ 0.000000] efi: mem106: type=7, attr=0xf, range=[0x00000000ae244000-0x00000000ae24e000) (0MB) [ 0.000000] efi: mem107: type=4, attr=0xf, range=[0x00000000ae24e000-0x00000000ae28e000) (0MB) [ 0.000000] efi: mem108: type=7, attr=0xf, range=[0x00000000ae28e000-0x00000000ae297000) (0MB) [ 0.000000] efi: mem109: type=4, attr=0xf, range=[0x00000000ae297000-0x00000000ae2d1000) (0MB) [ 0.000000] efi: mem110: type=7, attr=0xf, range=[0x00000000ae2d1000-0x00000000ae2da000) (0MB) [ 0.000000] efi: mem111: type=4, attr=0xf, range=[0x00000000ae2da000-0x00000000ae302000) (0MB) [ 0.000000] efi: mem112: type=7, attr=0xf, range=[0x00000000ae302000-0x00000000ae30f000) (0MB) [ 0.000000] efi: mem113: type=4, attr=0xf, range=[0x00000000ae30f000-0x00000000ae340000) (0MB) [ 0.000000] efi: mem114: type=7, attr=0xf, range=[0x00000000ae340000-0x00000000ae354000) (0MB) [ 0.000000] efi: mem115: type=4, attr=0xf, range=[0x00000000ae354000-0x00000000ae377000) (0MB) [ 0.000000] efi: mem116: type=7, attr=0xf, range=[0x00000000ae377000-0x00000000ae387000) (0MB) [ 0.000000] efi: mem117: type=4, attr=0xf, range=[0x00000000ae387000-0x00000000ae3b2000) (0MB) [ 0.000000] efi: mem118: type=7, attr=0xf, range=[0x00000000ae3b2000-0x00000000ae3bb000) (0MB) [ 0.000000] efi: mem119: type=4, attr=0xf, range=[0x00000000ae3bb000-0x00000000ae3dd000) (0MB) [ 0.000000] efi: mem120: type=7, attr=0xf, range=[0x00000000ae3dd000-0x00000000ae3df000) (0MB) [ 0.000000] efi: mem121: type=4, attr=0xf, range=[0x00000000ae3df000-0x00000000ae41f000) (0MB) [ 0.000000] efi: mem122: type=7, attr=0xf, range=[0x00000000ae41f000-0x00000000ae427000) (0MB) [ 0.000000] efi: mem123: type=4, attr=0xf, range=[0x00000000ae427000-0x00000000ae44a000) (0MB) [ 0.000000] efi: mem124: type=7, attr=0xf, range=[0x00000000ae44a000-0x00000000ae44b000) (0MB) [ 0.000000] efi: mem125: type=4, attr=0xf, range=[0x00000000ae44b000-0x00000000ae478000) (0MB) [ 0.000000] efi: mem126: type=7, attr=0xf, range=[0x00000000ae478000-0x00000000ae47b000) (0MB) [ 0.000000] efi: mem127: type=4, attr=0xf, range=[0x00000000ae47b000-0x00000000ae52b000) (0MB) [ 0.000000] efi: mem128: type=7, attr=0xf, range=[0x00000000ae52b000-0x00000000ae52c000) (0MB) [ 0.000000] efi: mem129: type=4, attr=0xf, range=[0x00000000ae52c000-0x00000000ae52f000) (0MB) [ 0.000000] efi: mem130: type=7, attr=0xf, range=[0x00000000ae52f000-0x00000000ae533000) (0MB) [ 0.000000] efi: mem131: type=4, attr=0xf, range=[0x00000000ae533000-0x00000000ae572000) (0MB) [ 0.000000] efi: mem132: type=7, attr=0xf, range=[0x00000000ae572000-0x00000000ae577000) (0MB) [ 0.000000] efi: mem133: type=4, attr=0xf, range=[0x00000000ae577000-0x00000000ae61f000) (0MB) [ 0.000000] efi: mem134: type=7, attr=0xf, range=[0x00000000ae61f000-0x00000000ae620000) (0MB) [ 0.000000] efi: mem135: type=4, attr=0xf, range=[0x00000000ae620000-0x00000000ae64a000) (0MB) [ 0.000000] efi: mem136: type=7, attr=0xf, range=[0x00000000ae64a000-0x00000000ae64d000) (0MB) [ 0.000000] efi: mem137: type=4, attr=0xf, range=[0x00000000ae64d000-0x00000000ae884000) (2MB) [ 0.000000] efi: mem138: type=7, attr=0xf, range=[0x00000000ae884000-0x00000000ae886000) (0MB) [ 0.000000] efi: mem139: type=4, attr=0xf, range=[0x00000000ae886000-0x00000000ae914000) (0MB) [ 0.000000] efi: mem140: type=7, attr=0xf, range=[0x00000000ae914000-0x00000000ae915000) (0MB) [ 0.000000] efi: mem141: type=4, attr=0xf, range=[0x00000000ae915000-0x00000000b9878000) (175MB) [ 0.000000] efi: mem142: type=7, attr=0xf, range=[0x00000000b9878000-0x00000000b9df6000) (5MB) [ 0.000000] efi: mem143: type=3, attr=0xf, range=[0x00000000b9df6000-0x00000000ba4ae000) (6MB) [ 0.000000] efi: mem144: type=0, attr=0xf, range=[0x00000000ba4ae000-0x00000000ba540000) (0MB) [ 0.000000] efi: mem145: type=0, attr=0xf, range=[0x00000000ba540000-0x00000000ba78a000) (2MB) [ 0.000000] efi: mem146: type=9, attr=0xf, range=[0x00000000ba78a000-0x00000000ba791000) (0MB) [ 0.000000] efi: mem147: type=9, attr=0xf, range=[0x00000000ba791000-0x00000000ba79a000) (0MB) [ 0.000000] efi: mem148: type=10, attr=0xf, range=[0x00000000ba79a000-0x00000000bad01000) (5MB) [ 0.000000] efi: mem149: type=10, attr=0xf, range=[0x00000000bad01000-0x00000000bb880000) (11MB) [ 0.000000] efi: mem150: type=6, attr=0x800000000000000f, range=[0x00000000bb880000-0x00000000bc3d5000) (11MB) [ 0.000000] efi: mem151: type=6, attr=0x800000000000000f, range=[0x00000000bc3d5000-0x00000000bc9e0000) (6MB) [ 0.000000] efi: mem152: type=5, attr=0x800000000000000f, range=[0x00000000bc9e0000-0x00000000bc9f1000) (0MB) [ 0.000000] efi: mem153: type=5, attr=0x800000000000000f, range=[0x00000000bc9f1000-0x00000000bca36000) (0MB) [ 0.000000] efi: mem154: type=4, attr=0xf, range=[0x00000000bca36000-0x00000000bca37000) (0MB) [ 0.000000] efi: mem155: type=10, attr=0xf, range=[0x00000000bca37000-0x00000000bcc3d000) (2MB) [ 0.000000] efi: mem156: type=4, attr=0xf, range=[0x00000000bcc3d000-0x00000000bcd8d000) (1MB) [ 0.000000] efi: mem157: type=3, attr=0xf, range=[0x00000000bcd8d000-0x00000000bd02d000) (2MB) [ 0.000000] efi: mem158: type=4, attr=0xf, range=[0x00000000bd02d000-0x00000000bd02f000) (0MB) [ 0.000000] efi: mem159: type=3, attr=0xf, range=[0x00000000bd02f000-0x00000000bd033000) (0MB) [ 0.000000] efi: mem160: type=4, attr=0xf, range=[0x00000000bd033000-0x00000000bd037000) (0MB) [ 0.000000] efi: mem161: type=3, attr=0xf, range=[0x00000000bd037000-0x00000000bd039000) (0MB) [ 0.000000] efi: mem162: type=4, attr=0xf, range=[0x00000000bd039000-0x00000000bd03d000) (0MB) [ 0.000000] efi: mem163: type=3, attr=0xf, range=[0x00000000bd03d000-0x00000000bd03f000) (0MB) [ 0.000000] efi: mem164: type=4, attr=0xf, range=[0x00000000bd03f000-0x00000000bd066000) (0MB) [ 0.000000] efi: mem165: type=3, attr=0xf, range=[0x00000000bd066000-0x00000000bd083000) (0MB) [ 0.000000] efi: mem166: type=6, attr=0x800000000000000f, range=[0x00000000bd083000-0x00000000bd7f4000) (7MB) [ 0.000000] efi: mem167: type=4, attr=0xf, range=[0x00000000bd7f4000-0x00000000bd800000) (0MB) [ 0.000000] efi: mem168: type=7, attr=0xf, range=[0x0000000100001000-0x000000023f000000) (5103MB) [ 0.000000] efi: mem169: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB) [ 0.000000] efi: mem170: type=11, attr=0x8000000000000001, range=[0x00000000fec10000-0x00000000fec11000) (0MB) [ 0.000000] efi: mem171: type=11, attr=0x8000000000000001, range=[0x00000000fec20000-0x00000000fec21000) (0MB) [ 0.000000] efi: mem172: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed01000) (0MB) [ 0.000000] efi: mem173: type=11, attr=0x8000000000000001, range=[0x00000000fed61000-0x00000000fed71000) (0MB) [ 0.000000] efi: mem174: type=11, attr=0x8000000000000001, range=[0x00000000fed80000-0x00000000fed90000) (0MB) [ 0.000000] efi: mem175: type=11, attr=0x8000000000000001, range=[0x00000000fef00000-0x0000000100000000) (17MB) [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: To be filled by O.E.M. To be filled by O.E.M./M5A97 R2.0, BIOS 2301 01/06/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF write-through [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000BD800000 mask FFFFFF800000 uncachable [ 0.000000] 3 base 0000BE000000 mask FFFFFE000000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 000000023f000000 aka 9200M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3032MB, range: 8MB, type UC [ 0.000000] reg 3, base: 3040MB, range: 32MB, type UC [ 0.000000] total RAM covered: 3032M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 4 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3032MB, range: 8MB, type UC [ 0.000000] reg 3, base: 3040MB, range: 32MB, type UC [ 0.000000] e820: update [mem 0xbd800000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbd800 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x02fde000, 0x02fdefff] PGTABLE [ 0.000000] BRK [0x02fdf000, 0x02fdffff] PGTABLE [ 0.000000] BRK [0x02fe0000, 0x02fe0fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x23ee00000-0x23effffff] [ 0.000000] [mem 0x23ee00000-0x23effffff] page 2M [ 0.000000] BRK [0x02fe1000, 0x02fe1fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x23c000000-0x23edfffff] [ 0.000000] [mem 0x23c000000-0x23edfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff] [ 0.000000] [mem 0x200000000-0x23bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xba4adfff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G [ 0.000000] [mem 0x80000000-0xba3fffff] page 2M [ 0.000000] [mem 0xba400000-0xba4adfff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbca36000-0xbca36fff] [ 0.000000] [mem 0xbca36000-0xbca36fff] page 4k [ 0.000000] BRK [0x02fe2000, 0x02fe2fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xbcc3d000-0xbd082fff] [ 0.000000] [mem 0xbcc3d000-0xbcdfffff] page 4k [ 0.000000] [mem 0xbce00000-0xbcffffff] page 2M [ 0.000000] [mem 0xbd000000-0xbd082fff] page 4k [ 0.000000] BRK [0x02fe3000, 0x02fe3fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xbd7f4000-0xbd7fffff] [ 0.000000] [mem 0xbd7f4000-0xbd7fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100001000-0x1ffffffff] [ 0.000000] [mem 0x100001000-0x1001fffff] page 4k [ 0.000000] [mem 0x100200000-0x13fffffff] page 2M [ 0.000000] [mem 0x140000000-0x1ffffffff] page 1G [ 0.000000] RAMDISK: [mem 0x3d9b9000-0x3ebfafff] [ 0.000000] ACPI: RSDP 00000000ba791000 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 00000000ba791070 00005C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 00000000ba798200 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20131115/tbfadt-603) [ 0.000000] ACPI: DSDT 00000000ba791168 007095 (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 00000000bb87af80 000040 [ 0.000000] ACPI: APIC 00000000ba798310 00008E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 00000000ba7983a0 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 00000000ba7983e8 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.000000] ACPI: HPET 00000000ba798428 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.000000] ACPI: SSDT 00000000ba7984f0 0013CE (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: BGRT 00000000ba7984b8 000038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023effffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23effffff] [ 0.000000] NODE_DATA [mem 0x23eff5000-0x23eff9fff] [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236600000-ffff88023e5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x23effffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009ffff] [ 0.000000] node 0: [mem 0x00100000-0xba4adfff] [ 0.000000] node 0: [mem 0xbca36000-0xbca36fff] [ 0.000000] node 0: [mem 0xbcc3d000-0xbd082fff] [ 0.000000] node 0: [mem 0xbd7f4000-0xbd7fffff] [ 0.000000] node 0: [mem 0x100001000-0x23effffff] [ 0.000000] On node 0 totalpages: 2070687 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 24 pages reserved [ 0.000000] DMA zone: 3999 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11877 pages used for memmap [ 0.000000] DMA32 zone: 760065 pages, LIFO batch:31 [ 0.000000] Normal zone: 20416 pages used for memmap [ 0.000000] Normal zone: 1306623 pages, LIFO batch:31 [ 0.000000] tboot: non-0 tboot_addr but it is not of type E820_RESERVED [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 7, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec20000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 8, version 33, address 0xfec20000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000 [ 0.000000] smpboot: Allowing 6 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 72 [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7db19000-0x7db19fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7db25000-0x7db25fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7db26000-0x7db26fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7db36000-0x7db36fff] [ 0.000000] PM: Registered nosave memory: [mem 0xba4ae000-0xba789fff] [ 0.000000] PM: Registered nosave memory: [mem 0xba78a000-0xba799fff] [ 0.000000] PM: Registered nosave memory: [mem 0xba79a000-0xbb87ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbb880000-0xbca35fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbca37000-0xbcc3cfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbd083000-0xbd7f3fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbd800000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff] [ 0.000000] e820: [mem 0xbd800000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88023ec00000 s86336 r8192 d24256 u262144 [ 0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2038306 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-30-generic.efi.signed root=UUID=ca3ab141-9b59-484e-85d6-0d2813f68039 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 0 size 32 MB [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ a0000000 [ 0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xa3ffffff] [ 0.000000] Memory: 7773176K/8282748K available (7356K kernel code, 1142K rwdata, 3396K rodata, 1332K init, 1440K bss, 509572K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-5. [ 0.000000] NR_IRQS:16640 nr_irqs:1272 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 33554432 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 3913.178 MHz processor [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 7826.35 BogoMIPS (lpj=15652712) [ 0.000005] pid_max: default: 32768 minimum: 301 [ 0.002094] Security Framework initialized [ 0.002114] AppArmor: AppArmor initialized [ 0.002115] Yama: becoming mindful. [ 0.002680] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.004695] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.005590] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.005600] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.005805] Initializing cgroup subsys memory [ 0.005810] Initializing cgroup subsys devices [ 0.005812] Initializing cgroup subsys freezer [ 0.005813] Initializing cgroup subsys blkio [ 0.005815] Initializing cgroup subsys perf_event [ 0.005816] Initializing cgroup subsys hugetlb [ 0.005836] tseg: 00bd800000 [ 0.005838] CPU: Physical Processor ID: 0 [ 0.005839] CPU: Processor Core ID: 0 [ 0.005840] mce: CPU supports 7 MCE banks [ 0.005846] LVT offset 1 assigned for vector 0xf9 [ 0.005851] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.005851] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512 [ 0.005851] tlb_flushall_shift: 5 [ 0.005932] Freeing SMP alternatives memory: 32K (ffffffff81e6c000 - ffffffff81e74000) [ 0.006675] ACPI: Core revision 20131115 [ 0.008819] ACPI: All ACPI Tables successfully acquired [ 0.211810] ftrace: allocating 28465 entries in 112 pages [ 0.220321] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.260056] smpboot: CPU0: AMD FX(tm)-6350 Six-Core Processor (fam: 15, model: 02, stepping: 00) [ 0.367821] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.367826] ... version: 0 [ 0.367827] ... bit width: 48 [ 0.367828] ... generic registers: 6 [ 0.367829] ... value mask: 0000ffffffffffff [ 0.367830] ... max period: 00007fffffffffff [ 0.367831] ... fixed-purpose events: 0 [ 0.367832] ... event mask: 000000000000003f [ 0.369271] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.369344] x86: Booting SMP configuration: [ 0.369346] .... node #0, CPUs: #1 #2 #3 #4 #5 [ 0.435327] x86: Booted up 1 node, 6 CPUs [ 0.435330] smpboot: Total of 6 processors activated (46958.13 BogoMIPS) [ 0.442514] devtmpfs: initialized [ 0.445616] EVM: security.selinux [ 0.445618] EVM: security.SMACK64 [ 0.445619] EVM: security.ima [ 0.445619] EVM: security.capability [ 0.445679] PM: Registering ACPI NVS region [mem 0xba79a000-0xbb87ffff] (17719296 bytes) [ 0.445944] PM: Registering ACPI NVS region [mem 0xbca37000-0xbcc3cfff] (2121728 bytes) [ 0.446711] pinctrl core: initialized pinctrl subsystem [ 0.446762] regulator-dummy: no parameters [ 0.446786] RTC time: 6:40:20, date: 06/27/14 [ 0.446816] NET: Registered protocol family 16 [ 0.446918] cpuidle: using governor ladder [ 0.446920] cpuidle: using governor menu [ 0.446982] ACPI: bus type PCI registered [ 0.446984] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.447035] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.447037] PCI: not using MMCONFIG [ 0.447038] PCI: Using configuration type 1 for base access [ 0.447039] PCI: Using configuration type 1 for extended access [ 0.448068] bio: create slab at 0 [ 0.448233] ACPI: Added _OSI(Module Device) [ 0.448235] ACPI: Added _OSI(Processor Device) [ 0.448236] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.448237] ACPI: Added _OSI(Processor Aggregator Device) [ 0.450337] ACPI: Executed 2 blocks of module-level executable AML code [ 0.455013] ACPI: Interpreter enabled [ 0.455019] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 0.455023] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.455037] ACPI: (supports S0 S3 S4 S5) [ 0.455038] ACPI: Using IOAPIC for interrupt routing [ 0.455176] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.455213] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.474074] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.474198] ACPI: No dock devices found. [ 0.482127] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.482132] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.482137] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.482650] PCI host bridge to bus 0000:00 [ 0.482652] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.482654] pci_bus 0000:00: root bus resource [io 0x0000-0x03af] [ 0.482656] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7] [ 0.482657] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df] [ 0.482659] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.482660] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.482662] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.482663] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff] [ 0.482677] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000 [ 0.482833] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.482881] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.482951] pci 0000:00:02.0: System wakeup disabled by ACPI [ 0.482979] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400 [ 0.483025] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.483089] pci 0000:00:04.0: System wakeup disabled by ACPI [ 0.483115] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400 [ 0.483162] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.483225] pci 0000:00:05.0: System wakeup disabled by ACPI [ 0.483252] pci 0000:00:07.0: [1002:5a1b] type 01 class 0x060400 [ 0.483299] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.483363] pci 0000:00:07.0: System wakeup disabled by ACPI [ 0.483407] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 0.483425] pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047] [ 0.483434] pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033] [ 0.483442] pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027] [ 0.483451] pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013] [ 0.483460] pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f] [ 0.483469] pci 0000:00:11.0: reg 0x24: [mem 0xfeb0b000-0xfeb0b3ff] [ 0.483589] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.483601] pci 0000:00:12.0: reg 0x10: [mem 0xfeb0a000-0xfeb0afff] [ 0.483709] pci 0000:00:12.0: System wakeup disabled by ACPI [ 0.483769] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.483786] pci 0000:00:12.2: reg 0x10: [mem 0xfeb09000-0xfeb090ff] [ 0.483864] pci 0000:00:12.2: supports D1 D2 [ 0.483866] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.483929] pci 0000:00:12.2: System wakeup disabled by ACPI [ 0.483958] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.483971] pci 0000:00:13.0: reg 0x10: [mem 0xfeb08000-0xfeb08fff] [ 0.484078] pci 0000:00:13.0: System wakeup disabled by ACPI [ 0.484109] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.484127] pci 0000:00:13.2: reg 0x10: [mem 0xfeb07000-0xfeb070ff] [ 0.484203] pci 0000:00:13.2: supports D1 D2 [ 0.484205] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.484268] pci 0000:00:13.2: System wakeup disabled by ACPI [ 0.484297] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.484437] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.484456] pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit] [ 0.484518] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.484582] pci 0000:00:14.2: System wakeup disabled by ACPI [ 0.484606] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.484743] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.484831] pci 0000:00:14.4: System wakeup disabled by ACPI [ 0.484855] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.484867] pci 0000:00:14.5: reg 0x10: [mem 0xfeb06000-0xfeb06fff] [ 0.484975] pci 0000:00:14.5: System wakeup disabled by ACPI [ 0.485002] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 0.485014] pci 0000:00:16.0: reg 0x10: [mem 0xfeb05000-0xfeb05fff] [ 0.485122] pci 0000:00:16.0: System wakeup disabled by ACPI [ 0.485152] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 0.485169] pci 0000:00:16.2: reg 0x10: [mem 0xfeb04000-0xfeb040ff] [ 0.485246] pci 0000:00:16.2: supports D1 D2 [ 0.485248] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.485311] pci 0000:00:16.2: System wakeup disabled by ACPI [ 0.485341] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 [ 0.485434] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 [ 0.485520] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 [ 0.485607] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 [ 0.485701] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 [ 0.485787] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 [ 0.486075] pci 0000:01:00.0: [1002:683d] type 00 class 0x030000 [ 0.486089] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.486100] pci 0000:01:00.0: reg 0x18: [mem 0xfea00000-0xfea3ffff 64bit] [ 0.486107] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 0.486120] pci 0000:01:00.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref] [ 0.486162] pci 0000:01:00.0: supports D1 D2 [ 0.486163] pci 0000:01:00.0: PME# supported from D1 D2 D3hot [ 0.486247] pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300 [ 0.486259] pci 0000:01:00.1: reg 0x10: [mem 0xfea60000-0xfea63fff 64bit] [ 0.486319] pci 0000:01:00.1: supports D1 D2 [ 0.490561] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.490566] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.490568] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.490572] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.490773] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.490787] pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.490810] pci 0000:02:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref] [ 0.490825] pci 0000:02:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref] [ 0.490886] pci 0000:02:00.0: supports D1 D2 [ 0.490887] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.498571] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.498576] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] [ 0.498581] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref] [ 0.498642] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330 [ 0.498662] pci 0000:03:00.0: reg 0x10: [mem 0xfe900000-0xfe907fff 64bit] [ 0.498763] pci 0000:03:00.0: PME# supported from D3cold [ 0.506579] pci 0000:00:05.0: PCI bridge to [bus 03] [ 0.506585] pci 0000:00:05.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.506647] pci 0000:04:00.0: [1b21:1042] type 00 class 0x0c0330 [ 0.506666] pci 0000:04:00.0: reg 0x10: [mem 0xfe800000-0xfe807fff 64bit] [ 0.506767] pci 0000:04:00.0: PME# supported from D3cold [ 0.514588] pci 0000:00:07.0: PCI bridge to [bus 04] [ 0.514594] pci 0000:00:07.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.514665] pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode) [ 0.514673] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode) [ 0.514675] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode) [ 0.514676] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode) [ 0.514678] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.514679] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.514681] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.514682] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode) [ 0.515088] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0 [ 0.515158] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0 [ 0.515231] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0 [ 0.515302] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 10 11 14 15) *0 [ 0.515360] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0 [ 0.515408] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0 [ 0.515469] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0 [ 0.515515] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0 [ 0.515655] ACPI: Enabled 1 GPEs in block 00 to 1F [ 0.515660] ACPI: \_SB_.PCI0: notify handler is installed [ 0.515700] Found 1 acpi root devices [ 0.515718] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62 [ 0.515804] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.515806] vgaarb: loaded [ 0.515807] vgaarb: bridge control possible 0000:01:00.0 [ 0.515958] SCSI subsystem initialized [ 0.516010] libata version 3.00 loaded. [ 0.516028] ACPI: bus type USB registered [ 0.516041] usbcore: registered new interface driver usbfs [ 0.516048] usbcore: registered new interface driver hub [ 0.516071] usbcore: registered new device driver usb [ 0.516179] PCI: Using ACPI for IRQ routing [ 0.524241] PCI: pci_cache_line_size set to 64 bytes [ 0.524301] e820: reserve RAM buffer [mem 0x7db19018-0x7fffffff] [ 0.524303] e820: reserve RAM buffer [mem 0x7db26018-0x7fffffff] [ 0.524304] e820: reserve RAM buffer [mem 0xba4ae000-0xbbffffff] [ 0.524305] e820: reserve RAM buffer [mem 0xbca37000-0xbfffffff] [ 0.524306] e820: reserve RAM buffer [mem 0xbd083000-0xbfffffff] [ 0.524308] e820: reserve RAM buffer [mem 0xbd800000-0xbfffffff] [ 0.524309] e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff] [ 0.524374] NetLabel: Initializing [ 0.524375] NetLabel: domain hash size = 128 [ 0.524376] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.524387] NetLabel: unlabeled traffic allowed by default [ 0.524435] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.524438] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.526497] Switched to clocksource hpet [ 0.532098] AppArmor: AppArmor Filesystem Enabled [ 0.532113] pnp: PnP ACPI init [ 0.532121] ACPI: bus type PNP registered [ 0.532204] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.532206] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.532721] system 00:01: [io 0x040b] has been reserved [ 0.532723] system 00:01: [io 0x04d6] has been reserved [ 0.532726] system 00:01: [io 0x0c00-0x0c01] has been reserved [ 0.532727] system 00:01: [io 0x0c14] has been reserved [ 0.532729] system 00:01: [io 0x0c50-0x0c51] has been reserved [ 0.532731] system 00:01: [io 0x0c52] has been reserved [ 0.532733] system 00:01: [io 0x0c6c] has been reserved [ 0.532734] system 00:01: [io 0x0c6f] has been reserved [ 0.532736] system 00:01: [io 0x0cd0-0x0cd1] has been reserved [ 0.532738] system 00:01: [io 0x0cd2-0x0cd3] has been reserved [ 0.532740] system 00:01: [io 0x0cd4-0x0cd5] has been reserved [ 0.532741] system 00:01: [io 0x0cd6-0x0cd7] has been reserved [ 0.532743] system 00:01: [io 0x0cd8-0x0cdf] has been reserved [ 0.532745] system 00:01: [io 0x0800-0x089f] could not be reserved [ 0.532747] system 00:01: [io 0x0b20-0x0b3f] has been reserved [ 0.532748] system 00:01: [io 0x0900-0x090f] has been reserved [ 0.532750] system 00:01: [io 0x0910-0x091f] has been reserved [ 0.532752] system 00:01: [io 0xfe00-0xfefe] has been reserved [ 0.532754] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.532756] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.532758] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.532760] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.532762] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.532764] system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved [ 0.532766] system 00:01: [mem 0xff800000-0xffffffff] has been reserved [ 0.532768] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.532902] system 00:02: [io 0x0290-0x02af] has been reserved [ 0.532904] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.532916] pnp 00:03: [dma 4] [ 0.532931] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.532958] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.532976] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.533027] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.533029] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.533052] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.533083] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.533261] pnp 00:09: [dma 0 disabled] [ 0.533299] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.533424] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.533532] system 00:0b: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.533535] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.533709] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.533714] pnp: PnP ACPI: found 13 devices [ 0.533715] ACPI: bus type PNP unregistered [ 0.539945] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.539948] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.539952] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.539955] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.539959] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.539961] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] [ 0.539965] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref] [ 0.539969] pci 0000:00:05.0: PCI bridge to [bus 03] [ 0.539972] pci 0000:00:05.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.539977] pci 0000:00:07.0: PCI bridge to [bus 04] [ 0.539980] pci 0000:00:07.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.539985] pci 0000:00:14.4: PCI bridge to [bus 05] [ 0.539996] pci_bus 0000:00: resource 4 [io 0x0000-0x03af] [ 0.539997] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7] [ 0.539999] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df] [ 0.540000] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff] [ 0.540002] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff] [ 0.540003] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff] [ 0.540005] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff] [ 0.540007] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.540008] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.540009] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.540011] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.540013] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref] [ 0.540014] pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.540016] pci_bus 0000:04: resource 1 [mem 0xfe800000-0xfe8fffff] [ 0.540017] pci_bus 0000:05: resource 4 [io 0x0000-0x03af] [ 0.540019] pci_bus 0000:05: resource 5 [io 0x03e0-0x0cf7] [ 0.540020] pci_bus 0000:05: resource 6 [io 0x03b0-0x03df] [ 0.540022] pci_bus 0000:05: resource 7 [io 0x0d00-0xffff] [ 0.540023] pci_bus 0000:05: resource 8 [mem 0x000a0000-0x000bffff] [ 0.540025] pci_bus 0000:05: resource 9 [mem 0x000c0000-0x000dffff] [ 0.540026] pci_bus 0000:05: resource 10 [mem 0xc0000000-0xffffffff] [ 0.540047] NET: Registered protocol family 2 [ 0.540202] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.540380] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.540579] TCP: Hash tables configured (established 65536 bind 65536) [ 0.540611] TCP: reno registered [ 0.540623] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.540660] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.540731] NET: Registered protocol family 1 [ 0.831102] pci 0000:01:00.0: Boot video device [ 0.831343] PCI: CLS 64 bytes, default 64 [ 0.831399] Trying to unpack rootfs image as initramfs... [ 1.073749] Freeing initrd memory: 18696K (ffff88003d9b9000 - ffff88003ebfb000) [ 1.074055] PCI-DMA: Disabling AGP. [ 1.074122] PCI-DMA: aperture base @ a0000000 size 65536 KB [ 1.074123] PCI-DMA: using GART IOMMU. [ 1.074126] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.078263] perf: AMD NB counters detected [ 1.078286] LVT offset 0 assigned for vector 0x400 [ 1.078307] perf: AMD IBS detected (0x000000ff) [ 1.078342] microcode: CPU0: patch_level=0x06000822 [ 1.078348] microcode: CPU1: patch_level=0x06000822 [ 1.078356] microcode: CPU2: patch_level=0x06000822 [ 1.078364] microcode: CPU3: patch_level=0x06000822 [ 1.078372] microcode: CPU4: patch_level=0x06000822 [ 1.078379] microcode: CPU5: patch_level=0x06000822 [ 1.078428] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 1.078429] Scanning for low memory corruption every 60 seconds [ 1.078674] Initialise system trusted keyring [ 1.078709] audit: initializing netlink socket (disabled) [ 1.078717] type=2000 audit(1403851220.776:1): initialized [ 1.099725] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.100970] zbud: loaded [ 1.101076] VFS: Disk quotas dquot_6.5.2 [ 1.101110] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.101511] fuse init (API version 7.22) [ 1.101573] msgmni has been set to 15758 [ 1.101616] Key type big_key registered [ 1.102081] Key type asymmetric registered [ 1.102083] Asymmetric key parser 'x509' registered [ 1.102107] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.102145] io scheduler noop registered [ 1.102146] io scheduler deadline registered (default) [ 1.102166] io scheduler cfq registered [ 1.102508] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.102521] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.102559] efifb: probing for efifb [ 1.102793] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90010f00000, using 3072k, total 3072k [ 1.102795] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 1.102795] efifb: scrolling: redraw [ 1.102797] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.104306] Console: switching to colour frame buffer device 128x48 [ 1.105741] fb0: EFI VGA frame buffer device [ 1.105753] ipmi message handler version 39.2 [ 1.105798] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.105802] ACPI: Power Button [PWRB] [ 1.105829] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.105831] ACPI: Power Button [PWRF] [ 1.105875] ACPI: acpi_idle registered with cpuidle [ 1.106285] GHES: HEST is not enabled! [ 1.106368] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.126766] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.128084] Linux agpgart interface v0.103 [ 1.129255] brd: module loaded [ 1.129891] loop: module loaded [ 1.130202] libphy: Fixed MDIO Bus: probed [ 1.130278] tun: Universal TUN/TAP device driver, 1.6 [ 1.130279] tun: (C) 1999-2004 Max Krasnyansky [ 1.130321] PPP generic driver version 2.4.2 [ 1.130363] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.130366] ehci-pci: EHCI PCI platform driver [ 1.130461] QUIRK: Enable AMD PLL fix [ 1.130477] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.130482] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.130486] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.130494] ehci-pci 0000:00:12.2: debug port 1 [ 1.130528] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000 [ 1.139353] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.139416] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.139418] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.139420] usb usb1: Product: EHCI Host Controller [ 1.139421] usb usb1: Manufacturer: Linux 3.13.0-30-generic ehci_hcd [ 1.139423] usb usb1: SerialNumber: 0000:00:12.2 [ 1.139511] hub 1-0:1.0: USB hub found [ 1.139517] hub 1-0:1.0: 5 ports detected [ 1.139696] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.139700] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.139703] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.139712] ehci-pci 0000:00:13.2: debug port 1 [ 1.139742] ehci-pci 0000:00:13.2: irq 21, io mem 0xfeb07000 [ 1.151354] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.151404] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.151406] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.151408] usb usb2: Product: EHCI Host Controller [ 1.151409] usb usb2: Manufacturer: Linux 3.13.0-30-generic ehci_hcd [ 1.151411] usb usb2: SerialNumber: 0000:00:13.2 [ 1.151537] hub 2-0:1.0: USB hub found [ 1.151543] hub 2-0:1.0: 5 ports detected [ 1.151722] ehci-pci 0000:00:16.2: EHCI Host Controller [ 1.151726] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 1.151728] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.151737] ehci-pci 0000:00:16.2: debug port 1 [ 1.151765] ehci-pci 0000:00:16.2: irq 23, io mem 0xfeb04000 [ 1.163372] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 1.163408] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.163410] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.163411] usb usb3: Product: EHCI Host Controller [ 1.163413] usb usb3: Manufacturer: Linux 3.13.0-30-generic ehci_hcd [ 1.163414] usb usb3: SerialNumber: 0000:00:16.2 [ 1.163533] hub 3-0:1.0: USB hub found [ 1.163542] hub 3-0:1.0: 4 ports detected [ 1.163627] ehci-platform: EHCI generic platform driver [ 1.163633] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.163635] ohci-pci: OHCI PCI platform driver [ 1.163716] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.163720] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 1.163737] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000 [ 1.223451] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.223454] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.223456] usb usb4: Product: OHCI PCI host controller [ 1.223457] usb usb4: Manufacturer: Linux 3.13.0-30-generic ohci_hcd [ 1.223458] usb usb4: SerialNumber: 0000:00:12.0 [ 1.223579] hub 4-0:1.0: USB hub found [ 1.223591] hub 4-0:1.0: 5 ports detected [ 1.223755] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.223760] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.223777] ohci-pci 0000:00:13.0: irq 20, io mem 0xfeb08000 [ 1.283522] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.283525] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.283527] usb usb5: Product: OHCI PCI host controller [ 1.283528] usb usb5: Manufacturer: Linux 3.13.0-30-generic ohci_hcd [ 1.283529] usb usb5: SerialNumber: 0000:00:13.0 [ 1.283638] hub 5-0:1.0: USB hub found [ 1.283651] hub 5-0:1.0: 5 ports detected [ 1.283817] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.283820] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 1.283834] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000 [ 1.343623] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.343625] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.343627] usb usb6: Product: OHCI PCI host controller [ 1.343628] usb usb6: Manufacturer: Linux 3.13.0-30-generic ohci_hcd [ 1.343630] usb usb6: SerialNumber: 0000:00:14.5 [ 1.343796] hub 6-0:1.0: USB hub found [ 1.343804] hub 6-0:1.0: 2 ports detected [ 1.343950] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 1.343953] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 1.343972] ohci-pci 0000:00:16.0: irq 22, io mem 0xfeb05000 [ 1.403625] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.403627] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.403628] usb usb7: Product: OHCI PCI host controller [ 1.403629] usb usb7: Manufacturer: Linux 3.13.0-30-generic ohci_hcd [ 1.403631] usb usb7: SerialNumber: 0000:00:16.0 [ 1.403865] hub 7-0:1.0: USB hub found [ 1.403873] hub 7-0:1.0: 4 ports detected [ 1.403960] ohci-platform: OHCI generic platform driver [ 1.403966] uhci_hcd: USB Universal Host Controller Interface driver [ 1.404031] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 1.404035] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8 [ 1.458188] xhci_hcd 0000:03:00.0: irq 72 for MSI/MSI-X [ 1.458193] xhci_hcd 0000:03:00.0: irq 73 for MSI/MSI-X [ 1.458198] xhci_hcd 0000:03:00.0: irq 74 for MSI/MSI-X [ 1.458203] xhci_hcd 0000:03:00.0: irq 75 for MSI/MSI-X [ 1.458207] xhci_hcd 0000:03:00.0: irq 76 for MSI/MSI-X [ 1.458212] xhci_hcd 0000:03:00.0: irq 77 for MSI/MSI-X [ 1.458216] xhci_hcd 0000:03:00.0: irq 78 for MSI/MSI-X [ 1.458311] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.458312] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.458314] usb usb8: Product: xHCI Host Controller [ 1.458315] usb usb8: Manufacturer: Linux 3.13.0-30-generic xhci_hcd [ 1.458316] usb usb8: SerialNumber: 0000:03:00.0 [ 1.458489] hub 8-0:1.0: USB hub found [ 1.458497] hub 8-0:1.0: 2 ports detected [ 1.458556] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 1.458559] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 9 [ 1.458602] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.458603] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.458605] usb usb9: Product: xHCI Host Controller [ 1.458606] usb usb9: Manufacturer: Linux 3.13.0-30-generic xhci_hcd [ 1.458607] usb usb9: SerialNumber: 0000:03:00.0 [ 1.458680] hub 9-0:1.0: USB hub found [ 1.458687] hub 9-0:1.0: 2 ports detected [ 1.463868] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.463873] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 10 [ 1.518003] xhci_hcd 0000:04:00.0: irq 79 for MSI/MSI-X [ 1.518009] xhci_hcd 0000:04:00.0: irq 80 for MSI/MSI-X [ 1.518013] xhci_hcd 0000:04:00.0: irq 81 for MSI/MSI-X [ 1.518017] xhci_hcd 0000:04:00.0: irq 82 for MSI/MSI-X [ 1.518024] xhci_hcd 0000:04:00.0: irq 83 for MSI/MSI-X [ 1.518028] xhci_hcd 0000:04:00.0: irq 84 for MSI/MSI-X [ 1.518032] xhci_hcd 0000:04:00.0: irq 85 for MSI/MSI-X [ 1.518128] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.518129] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.518131] usb usb10: Product: xHCI Host Controller [ 1.518132] usb usb10: Manufacturer: Linux 3.13.0-30-generic xhci_hcd [ 1.518133] usb usb10: SerialNumber: 0000:04:00.0 [ 1.518263] hub 10-0:1.0: USB hub found [ 1.518270] hub 10-0:1.0: 2 ports detected [ 1.518327] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.518329] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 11 [ 1.518369] usb usb11: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.518370] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.518371] usb usb11: Product: xHCI Host Controller [ 1.518373] usb usb11: Manufacturer: Linux 3.13.0-30-generic xhci_hcd [ 1.518374] usb usb11: SerialNumber: 0000:04:00.0 [ 1.518439] hub 11-0:1.0: USB hub found [ 1.518446] hub 11-0:1.0: 2 ports detected [ 1.528007] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.528441] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.528447] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.528564] mousedev: PS/2 mouse device common for all mice [ 1.528718] rtc_cmos 00:04: RTC can wake from S4 [ 1.528813] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.528833] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.528882] device-mapper: uevent: version 1.0.3 [ 1.528937] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 1.528942] ledtrig-cpu: registered to indicate activity on CPUs [ 1.528943] EFI Variables Facility v0.08 2004-May-17 [ 1.534754] TCP: cubic registered [ 1.534820] NET: Registered protocol family 10 [ 1.534945] NET: Registered protocol family 17 [ 1.534951] Key type dns_resolver registered [ 1.535488] Loading compiled-in X.509 certificates [ 1.536263] Loaded X.509 cert 'Magrathea: Glacier signing key: ac244bd3595520e48dacc7db4a170331cc248d65' [ 1.536272] registered taskstats version 1 [ 1.538854] Key type trusted registered [ 1.540779] Key type encrypted registered [ 1.542744] AppArmor: AppArmor sha1 policy hashing enabled [ 1.542747] IMA: No TPM chip found, activating TPM-bypass! [ 1.543013] regulator-dummy: disabling [ 1.543077] Magic number: 2:795:671 [ 1.543148] rtc_cmos 00:04: setting system clock to 2014-06-27 06:40:21 UTC (1403851221) [ 1.543263] acpi-cpufreq: overriding BIOS provided _PSD data [ 1.543518] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.543519] EDD information not available. [ 1.543558] PM: Hibernation image not present or could not be loaded. [ 1.544691] Freeing unused kernel memory: 1332K (ffffffff81d1f000 - ffffffff81e6c000) [ 1.544692] Write protecting the kernel read-only data: 12288k [ 1.547482] Freeing unused kernel memory: 824K (ffff880002732000 - ffff880002800000) [ 1.549734] Freeing unused kernel memory: 700K (ffff880002b51000 - ffff880002c00000) [ 1.562952] systemd-udevd[130]: starting version 204 [ 1.582856] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.582865] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.583079] r8169 0000:02:00.0: irq 86 for MSI/MSI-X [ 1.583229] r8169 0000:02:00.0 eth0: RTL8168f/8111f at 0xffffc90000c5a000, e0:3f:49:a0:8e:76, XID 08000800 IRQ 86 [ 1.583235] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.583295] ahci 0000:00:11.0: version 3.0 [ 1.583449] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x5 impl SATA mode [ 1.583452] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 1.583770] scsi0 : ahci [ 1.583886] scsi1 : ahci [ 1.583966] scsi2 : ahci [ 1.584025] ata1: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19 [ 1.584027] ata2: DUMMY [ 1.584029] ata3: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19 [ 2.076504] tsc: Refined TSC clocksource calibration: 3913.190 MHz [ 2.076514] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.076540] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.077613] ata3.00: ATA-9: ST1000DM003-1CH162, CC47, max UDMA/133 [ 2.077616] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.078254] ata1.00: ATA-8: WDC WD3200AVVS-63L2B0, 01.03A01, max UDMA/133 [ 2.078256] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.078498] ata3.00: configured for UDMA/133 [ 2.079062] ata1.00: configured for UDMA/133 [ 2.079212] scsi 0:0:0:0: Direct-Access ATA WDC WD3200AVVS-6 01.0 PQ: 0 ANSI: 5 [ 2.079343] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2.079376] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.079450] sd 0:0:0:0: [sda] Write Protect is off [ 2.079453] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.079494] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.079527] scsi 2:0:0:0: Direct-Access ATA ST1000DM003-1CH1 CC47 PQ: 0 ANSI: 5 [ 2.079677] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.079680] sd 2:0:0:0: [sdb] 4096-byte physical blocks [ 2.079701] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 2.079772] sd 2:0:0:0: [sdb] Write Protect is off [ 2.079774] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.079811] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.094449] sda: sda1 [ 2.094857] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.129649] sdb: sdb1 sdb2 sdb3 sdb4 [ 2.130128] sd 2:0:0:0: [sdb] Attached SCSI disk [ 2.284831] usb 2-5: new high-speed USB device number 3 using ehci-pci [ 2.418781] usb 2-5: New USB device found, idVendor=0bda, idProduct=8178 [ 2.418784] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.418785] usb 2-5: Product: 802.11n WLAN Adapter [ 2.418787] usb 2-5: Manufacturer: Realtek [ 2.418788] usb 2-5: SerialNumber: 00e04c000001 [ 2.681261] usb 5-1: new full-speed USB device number 2 using ohci-pci [ 2.856554] usb 5-1: New USB device found, idVendor=046d, idProduct=c21d [ 2.856561] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.856566] usb 5-1: Product: Gamepad F310 [ 2.856570] usb 5-1: Manufacturer: Logitech [ 2.856573] usb 5-1: SerialNumber: A457D234 [ 2.924485] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) [ 2.993637] usb 4-3: new low-speed USB device number 2 using ohci-pci [ 3.077822] Switched to clocksource tsc [ 3.124112] random: nonblocking pool is initialized [ 3.157923] usb 4-3: New USB device found, idVendor=04f3, idProduct=0103 [ 3.157930] usb 4-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.422152] usb 4-4: new full-speed USB device number 3 using ohci-pci [ 3.595401] usb 4-4: New USB device found, idVendor=1e7d, idProduct=2c2e [ 3.595404] usb 4-4: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 3.595407] usb 4-4: Product: ROCCAT Lua [ 3.595409] usb 4-4: Manufacturer: ROCCAT [ 4.850536] Adding 3906556k swap on /dev/sdb4. Priority:-1 extents:1 across:3906556k FS [ 4.947917] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.117436] systemd-udevd[322]: starting version 204 [ 5.684194] lp: driver loaded but no devices found [ 5.722555] ppdev: user-space parallel port driver [ 6.308136] MCE: In-kernel MCE decoding enabled. [ 6.325147] wmi: Mapper loaded [ 6.328947] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 6.328994] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 6.426892] [drm] Initialized drm 1.1.0 20060810 [ 6.428990] EDAC MC: Ver: 3.0.0 [ 6.551773] AMD64 EDAC driver v3.4.0 [ 6.551799] EDAC amd64: DRAM ECC disabled. [ 6.551808] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 6.551808] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 6.551808] (Note that use of the override may cause unknown side effects.) [ 6.750345] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 [ 6.750400] sp5100_tco: PCI Revision ID: 0x42 [ 6.750432] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address [ 6.750442] sp5100_tco: Last reboot was not triggered by watchdog. [ 6.750482] sp5100_tco: initialized (0xffffc90000c7eb00). heartbeat=60 sec (nowayout=0) [ 6.809526] [drm] radeon kernel modesetting enabled. [ 6.809598] checking generic (c0000000 300000) vs hw (c0000000 10000000) [ 6.809599] fb: conflicting fb hw usage radeondrmfb vs EFI VGA - removing generic driver [ 6.809635] Console: switching to colour dummy device 80x25 [ 6.809922] [drm] initializing kernel modesetting (VERDE 0x1002:0x683D 0x1043:0x043B). [ 6.809955] [drm] register mmio base: 0xFEA00000 [ 6.809956] [drm] register mmio size: 262144 [ 6.810027] ATOM BIOS: 683D.15.32.0.0.AS12 [ 6.810163] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used) [ 6.810166] radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF [ 6.810168] [drm] Detected VRAM RAM=2048M, BAR=256M [ 6.810169] [drm] RAM width 128bits DDR [ 6.810911] [TTM] Zone kernel: Available graphics memory: 4035720 kiB [ 6.810913] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 6.810914] [TTM] Initializing pool allocator [ 6.810918] [TTM] Initializing DMA pool allocator [ 6.810932] [drm] radeon: 2048M of VRAM memory ready [ 6.810934] [drm] radeon: 1024M of GTT memory ready. [ 6.810943] [drm] Loading VERDE Microcode [ 6.940986] hda-intel 0000:00:14.2: Using LPIB position fix [ 6.944448] hda-intel 0000:00:14.2: Enable sync_write for stable communication [ 6.976521] SKU: Nid=0x1d sku_cfg=0x4005e601 [ 6.976522] SKU: port_connectivity=0x1 [ 6.976524] SKU: enable_pcbeep=0x0 [ 6.976525] SKU: check_sum=0x00000005 [ 6.976525] SKU: customization=0x000000e6 [ 6.976526] SKU: external_amp=0x0 [ 6.976527] SKU: platform_type=0x0 [ 6.976528] SKU: swap=0x0 [ 6.976529] SKU: override=0x1 [ 6.976960] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 6.976962] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 6.976963] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 6.976964] mono: mono_out=0x0 [ 6.976965] dig-out=0x11/0x1e [ 6.976965] inputs: [ 6.976967] Front Mic=0x19 [ 6.976968] Rear Mic=0x18 [ 6.976969] Line=0x1a [ 6.976970] realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d [ 6.976971] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0887 [ 6.990567] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input12 [ 6.990640] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 [ 6.990705] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 [ 6.990767] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 6.990839] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 6.990907] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 6.990970] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 [ 6.991031] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5 [ 7.139159] asus_wmi: ASUS WMI generic driver loaded [ 7.140890] asus_wmi: Initialization: 0x0 [ 7.140916] asus_wmi: BIOS WMI version: 0.9 [ 7.140968] asus_wmi: SFUN value: 0x0 [ 7.141340] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input13 [ 7.142404] asus_wmi: Disabling ACPI video driver [ 7.167707] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 7.168731] [drm] probing gen 2 caps for device 1002:5a16 = 33ed02/0 [ 7.168735] [drm] PCIE gen 2 link speeds already enabled [ 7.176328] [drm] PCIE GART of 1024M enabled (table at 0x0000000000276000). [ 7.176425] radeon 0000:01:00.0: WB enabled [ 7.176428] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff880232725c00 [ 7.176430] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff880232725c04 [ 7.176431] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff880232725c08 [ 7.176433] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff880232725c0c [ 7.176435] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff880232725c10 [ 7.176924] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90011835a18 [ 7.176926] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 7.176927] [drm] Driver supports precise vblank timestamp query. [ 7.176946] radeon 0000:01:00.0: irq 87 for MSI/MSI-X [ 7.176956] radeon 0000:01:00.0: radeon: using MSI. [ 7.176982] [drm] radeon: irq initialized. [ 7.178840] hidraw: raw HID events driver (C) Jiri Kosina [ 7.189716] cfg80211: Calling CRDA to update world regulatory domain [ 7.208909] usbcore: registered new interface driver usbhid [ 7.208911] usbhid: USB HID core driver [ 7.264782] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.0/input/input14 [ 7.266829] hid-generic 0003:04F3:0103.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-0000:00:12.0-3/input0 [ 7.268460] input: ROCCAT ROCCAT Lua as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.0/input/input15 [ 7.268723] lua 0003:1E7D:2C2E.0003: input,hiddev0,hidraw1: USB HID v1.11 Mouse [ROCCAT ROCCAT Lua] on usb-0000:00:12.0-4/input0 [ 7.269024] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.1/input/input16 [ 7.270580] hid-generic 0003:04F3:0103.0002: input,hidraw2: USB HID v1.10 Device [HID 04f3:0103] on usb-0000:00:12.0-3/input1 [ 7.311565] input: Generic X-Box pad as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input17 [ 7.311657] usbcore: registered new interface driver xpad [ 7.330414] kvm: Nested Virtualization enabled [ 7.330419] kvm: Nested Paging enabled [ 7.334027] rtl8192cu: Chip version 0x11 [ 7.414296] rtl8192cu: MAC address: 00:0d:81:ac:6f:fd [ 7.414299] rtl8192cu: Board Type 0 [ 7.414486] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1 [ 7.414515] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin [ 7.414604] usbcore: registered new interface driver rtl8192cu [ 7.478452] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 7.478810] rtlwifi: wireless switch is on [ 7.604604] type=1400 audit(1403851227.552:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=447 comm="apparmor_parser" [ 7.604611] type=1400 audit(1403851227.552:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=447 comm="apparmor_parser" [ 7.604615] type=1400 audit(1403851227.552:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=447 comm="apparmor_parser" [ 7.604626] type=1400 audit(1403851227.552:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=436 comm="apparmor_parser" [ 7.604632] type=1400 audit(1403851227.552:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=436 comm="apparmor_parser" [ 7.604636] type=1400 audit(1403851227.552:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=436 comm="apparmor_parser" [ 7.604644] type=1400 audit(1403851227.552:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=587 comm="apparmor_parser" [ 7.604649] type=1400 audit(1403851227.552:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=587 comm="apparmor_parser" [ 7.604654] type=1400 audit(1403851227.552:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=587 comm="apparmor_parser" [ 7.604931] type=1400 audit(1403851227.552:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=436 comm="apparmor_parser" [ 7.664250] cfg80211: World regulatory domain updated: [ 7.664252] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 7.664254] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7.664255] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7.664257] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 7.664258] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7.664259] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7.698145] [drm] ring test on 0 succeeded in 1 usecs [ 7.698150] [drm] ring test on 1 succeeded in 1 usecs [ 7.698154] [drm] ring test on 2 succeeded in 1 usecs [ 7.698220] [drm] ring test on 3 succeeded in 4 usecs [ 7.698228] [drm] ring test on 4 succeeded in 1 usecs [ 7.884090] [drm] ring test on 5 succeeded in 2 usecs [ 7.884096] [drm] UVD initialized successfully. [ 7.885325] [drm] Enabling audio 0 support [ 7.885327] [drm] Enabling audio 1 support [ 7.885328] [drm] Enabling audio 2 support [ 7.885329] [drm] Enabling audio 3 support [ 7.885330] [drm] Enabling audio 4 support [ 7.885331] [drm] Enabling audio 5 support [ 7.885438] [drm] ib test on ring 0 succeeded in 0 usecs [ 7.885484] [drm] ib test on ring 1 succeeded in 0 usecs [ 7.885528] [drm] ib test on ring 2 succeeded in 0 usecs [ 7.885571] [drm] ib test on ring 3 succeeded in 0 usecs [ 7.885614] [drm] ib test on ring 4 succeeded in 1 usecs [ 8.036458] [drm] ib test on ring 5 succeeded [ 8.037168] [drm] Radeon Display Connectors [ 8.037169] [drm] Connector 0: [ 8.037170] [drm] DP-1 [ 8.037171] [drm] HPD4 [ 8.037173] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c [ 8.037174] [drm] Encoders: [ 8.037175] [drm] DFP1: INTERNAL_UNIPHY2 [ 8.037175] [drm] Connector 1: [ 8.037176] [drm] HDMI-A-1 [ 8.037177] [drm] HPD3 [ 8.037178] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c [ 8.037179] [drm] Encoders: [ 8.037180] [drm] DFP2: INTERNAL_UNIPHY2 [ 8.037180] [drm] Connector 2: [ 8.037181] [drm] DVI-D-1 [ 8.037182] [drm] HPD2 [ 8.037183] [drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c [ 8.037184] [drm] Encoders: [ 8.037185] [drm] DFP3: INTERNAL_UNIPHY1 [ 8.037186] [drm] Connector 3: [ 8.037186] [drm] DVI-I-1 [ 8.037187] [drm] HPD1 [ 8.037188] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c [ 8.037189] [drm] Encoders: [ 8.037190] [drm] DFP4: INTERNAL_UNIPHY [ 8.037191] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 8.037239] [drm] Internal thermal controller with fan control [ 8.037282] [drm] probing gen 2 caps for device 1002:5a16 = 33ed02/0 [ 8.707140] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro [ 9.406304] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null) [ 9.413867] [drm] radeon: dpm initialized [ 9.458508] [drm] fb mappable at 0xC1488000 [ 9.458510] [drm] vram apper at 0xC0000000 [ 9.458511] [drm] size 5324800 [ 9.458512] [drm] fb depth is 24 [ 9.458513] [drm] pitch is 5888 [ 9.458654] fbcon: radeondrmfb (fb0) is primary device [ 9.627855] init: failsafe main process (759) killed by TERM signal [ 10.150972] Console: switching to colour frame buffer device 180x56 [ 10.153233] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 10.153234] radeon 0000:01:00.0: registered panic notifier [ 10.153238] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0 [ 10.153282] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002) [ 10.153361] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client [ 10.153362] hda-intel 0000:01:00.1: Using LPIB position fix [ 10.153363] hda-intel 0000:01:00.1: Force to non-snoop mode [ 10.153398] snd_hda_intel 0000:01:00.1: irq 88 for MSI/MSI-X [ 10.157441] hda-intel 0000:01:00.1: Enable sync_write for stable communication [ 10.200158] HDMI ATI/AMD: no speaker allocation for ELD [ 10.200202] HDMI ATI/AMD: no speaker allocation for ELD [ 10.200248] HDMI ATI/AMD: no speaker allocation for ELD [ 10.200294] HDMI ATI/AMD: no speaker allocation for ELD [ 10.200342] HDMI ATI/AMD: no speaker allocation for ELD [ 10.200393] HDMI ATI/AMD: no speaker allocation for ELD [ 10.200515] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input23 [ 10.200628] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input22 [ 10.200699] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input21 [ 10.200763] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input20 [ 10.200825] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input19 [ 10.200886] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input18 [ 11.133297] init: avahi-cups-reload main process (871) terminated with status 1 [ 12.248035] Bluetooth: Core ver 2.17 [ 12.248056] NET: Registered protocol family 31 [ 12.248058] Bluetooth: HCI device and connection manager initialized [ 12.248064] Bluetooth: HCI socket layer initialized [ 12.248067] Bluetooth: L2CAP socket layer initialized [ 12.248071] Bluetooth: SCO socket layer initialized [ 12.383086] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.383088] Bluetooth: BNEP filters: protocol multicast [ 12.383093] Bluetooth: BNEP socket layer initialized [ 12.404715] Bluetooth: RFCOMM TTY layer initialized [ 12.404721] Bluetooth: RFCOMM socket layer initialized [ 12.404727] Bluetooth: RFCOMM ver 1.11 [ 15.043200] r8169 0000:02:00.0 eth0: link down [ 15.043265] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.043543] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.046943] rtl8192cu: MAC auto ON okay! [ 15.080115] rtl8192cu: Tx queue select: 0x05 [ 15.274786] init: samba-ad-dc main process (965) terminated with status 1 [ 15.326854] audit_printk_skb: 33 callbacks suppressed [ 15.326857] type=1400 audit(1403851235.264:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1039 comm="apparmor_parser" [ 15.326863] type=1400 audit(1403851235.264:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1039 comm="apparmor_parser" [ 15.326867] type=1400 audit(1403851235.264:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1039 comm="apparmor_parser" [ 15.327221] type=1400 audit(1403851235.264:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1039 comm="apparmor_parser" [ 15.327226] type=1400 audit(1403851235.264:27): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1039 comm="apparmor_parser" [ 15.327423] type=1400 audit(1403851235.264:28): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1039 comm="apparmor_parser" [ 15.333695] type=1400 audit(1403851235.272:29): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1045 comm="apparmor_parser" [ 15.333702] type=1400 audit(1403851235.272:30): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1045 comm="apparmor_parser" [ 15.334047] type=1400 audit(1403851235.272:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1045 comm="apparmor_parser" [ 15.337594] type=1400 audit(1403851235.276:32): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1037 comm="apparmor_parser" [ 15.459657] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 15.459935] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 16.251125] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 16.254753] vboxdrv: Found 6 processor cores. [ 16.255040] vboxdrv: fAsync=0 offMin=0x3f1 offMax=0x1ea24 [ 16.255123] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 16.255124] vboxdrv: Successfully loaded version 4.3.10_Ubuntu (interface 0x001a0007). [ 16.290298] wlan0: authenticate with 84:9c:a6:b0:88:e5 [ 16.306243] wlan0: direct probe to 84:9c:a6:b0:88:e5 (try 1/3) [ 16.399727] vboxpci: IOMMU not found (not registered) [ 16.510091] wlan0: send auth to 84:9c:a6:b0:88:e5 (try 2/3) [ 16.512934] wlan0: authenticated [ 16.514100] wlan0: associate with 84:9c:a6:b0:88:e5 (try 1/3) [ 16.532154] wlan0: RX AssocResp from 84:9c:a6:b0:88:e5 (capab=0x411 status=0 aid=1) [ 16.532221] wlan0: associated [ 16.532399] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 18.285539] init: plymouth-upstart-bridge main process ended, respawning