[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.16.0-rc2_kcloud_619f97_20140701+ (root@x-kcloud3) (gcc version 4.8.2 20131212 (Red Hat 4.8.2-7) (GCC) ) #2 SMP Tue Jul 1 10:25:29 EDT 2014 [ 0.000000] Command line: BOOT_IMAGE=kernels//kcloud/619f97296260053507a98bd7506ca0a249c294b5/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//kcloud/619f97296260053507a98bd7506ca0a249c294b5/modules_x86_64/lib/modules/3.16.0-rc2_kcloud_619f97_20140701+ acpi_rsdp=0xab7e1014 kexec_jump_back_entry=0x8ac57d78 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000100-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a84a1fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a84a2000-0x00000000a84c0fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000a84c1000-0x00000000ab1fafff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ab1fb000-0x00000000ab762fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ab763000-0x00000000ab7b5fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ab7b6000-0x00000000ab7e1fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000ab7e2000-0x00000000ab7fefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014f7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI not present or invalid. [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x14f800 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable [ 0.000000] 1 base 00B0000000 mask 7FF0000000 uncachable [ 0.000000] 2 base 00AE000000 mask 7FFE000000 uncachable [ 0.000000] 3 base 00AD000000 mask 7FFF000000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xab7ff max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x03350000, 0x03350fff] PGTABLE [ 0.000000] BRK [0x03351000, 0x03351fff] PGTABLE [ 0.000000] BRK [0x03352000, 0x03352fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x14f600000-0x14f7fffff] [ 0.000000] [mem 0x14f600000-0x14f7fffff] page 2M [ 0.000000] BRK [0x03353000, 0x03353fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x14c000000-0x14f5fffff] [ 0.000000] [mem 0x14c000000-0x14f5fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x14bffffff] [ 0.000000] [mem 0x100000000-0x13fffffff] page 1G [ 0.000000] [mem 0x140000000-0x14bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xa84a1fff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G [ 0.000000] [mem 0x80000000-0xa83fffff] page 2M [ 0.000000] [mem 0xa8400000-0xa84a1fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xa84c1000-0xab1fafff] [ 0.000000] [mem 0xa84c1000-0xa85fffff] page 4k [ 0.000000] [mem 0xa8600000-0xaaffffff] page 2M [ 0.000000] [mem 0xab000000-0xab1fafff] page 4k [ 0.000000] BRK [0x03354000, 0x03354fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xab7e2000-0xab7fefff] [ 0.000000] [mem 0xab7e2000-0xab7fefff] page 4k [ 0.000000] BRK [0x03355000, 0x03355fff] PGTABLE [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000AB7E1014 000024 (v02 INTEL ) [ 0.000000] ACPI: XSDT 0x00000000AB7C8188 000114 (v01 INTEL BDW-ULT 00000000 01000013) [ 0.000000] ACPI: FACP 0x00000000AB7D7000 0000F4 (v05 INTEL BDW-ULT 00000000 MSFT 0000005F) [ 0.000000] ACPI: DSDT 0x00000000A84A2000 01E50D (v02 INTEL BDW 00000000 INTL 20130927) [ 0.000000] ACPI: FACS 0x00000000AB79D000 000040 [ 0.000000] ACPI: TCPA 0x00000000AB7DF000 000032 (v02 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: UEFI 0x00000000AB7A0000 000042 (v01 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: SSDT 0x00000000AB7DE000 0004B5 (v01 Intel_ Tpm2Tabl 00001000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AB7DD000 00004E (v01 MeSsdt MeSsdt 00003000 INTL 20130927) [ 0.000000] ACPI: TPM2 0x00000000AB7DC000 000034 (v03 00000000 00000000) [ 0.000000] ACPI: SSDT 0x00000000AB7DB000 0005B1 (v01 Intel PerfTune 00001000 INTL 20130927) [ 0.000000] ACPI: DBGP 0x00000000AB7DA000 000034 (v01 INTEL 00000000 MSFT 0000005F) [ 0.000000] ACPI: DBG2 0x00000000AB7D9000 000054 (v00 INTEL 00000000 MSFT 0000005F) [ 0.000000] ACPI: LPIT 0x00000000AB7D8000 000094 (v01 INTEL BDW-ULT 00000000 MSFT 0000005F) [ 0.000000] ACPI: HPET 0x00000000AB7D6000 000038 (v01 INTEL BDW-ULT 00000001 MSFT 0000005F) [ 0.000000] ACPI: APIC 0x00000000AB7D5000 0000BC (v01 INTEL BDW-ULT 00000001 MSFT 0000005F) [ 0.000000] ACPI: MCFG 0x00000000AB7D4000 00003C (v01 INTEL BDW-ULT 00000001 MSFT 0000005F) [ 0.000000] ACPI: WDAT 0x00000000AB7D3000 000104 (v01 INTEL BDW-ULT 00000000 MSFT 0000005F) [ 0.000000] ACPI: SSDT 0x00000000AB7D2000 000250 (v01 INTEL sensrhub 00000000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AB7CE000 00340B (v01 INTEL PtidDevc 00001000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AB7CD000 000C7D (v01 INTEL Ther_Rvp 00001000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AB7CC000 00017F (v01 INTEL zpodd 00001000 INTL 20130927) [ 0.000000] ACPI: BOOT 0x00000000AB7CB000 000028 (v01 INTEL TIANO 00000002 MSFT 01000013) [ 0.000000] ACPI: SSDT 0x00000000AB7CA000 00053B (v01 PmRef Cpu0Ist 00003000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AB7C9000 000B74 (v01 CpuRef CpuSsdt 00003000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AB7C1000 006F06 (v01 SaSsdt SaSsdt 00003000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AB7E0000 0006A7 (v01 CppcTa CppcTabl 00001000 INTL 20130927) [ 0.000000] ACPI: PCCT 0x00000000AB7C0000 00006E (v05 PcctTa PcctTabl 00001000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AB7BF000 000AC4 (v01 Cpc_Ta Cpc_Tabl 00001000 INTL 20130927) [ 0.000000] ACPI: CSRT 0x00000000AB7BE000 0000C4 (v01 INTL BDW-ULT 00000001 INTL 20100528) [ 0.000000] ACPI: DMAR 0x00000000AB7BD000 0000F0 (v01 INTEL BDW 00000001 INTL 00000001) [ 0.000000] ACPI: FPDT 0x00000000AB7BC000 000044 (v01 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: ASF! 0x00000000AB7BB000 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: BGRT 0x00000000AB7BA000 000038 (v01 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000014f7fffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x14f7fffff] [ 0.000000] NODE_DATA [mem 0x14f7fa000-0x14f7fdfff] [ 0.000000] [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014ae00000-ffff88014edfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x14f7fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x00057fff] [ 0.000000] node 0: [mem 0x00059000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0xa84a1fff] [ 0.000000] node 0: [mem 0xa84c1000-0xab1fafff] [ 0.000000] node 0: [mem 0xab7e2000-0xab7fefff] [ 0.000000] node 0: [mem 0x100000000-0x14f7fffff] [ 0.000000] On node 0 totalpages: 1026453 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10888 pages used for memmap [ 0.000000] DMA32 zone: 696825 pages, LIFO batch:31 [ 0.000000] Normal zone: 5088 pages used for memmap [ 0.000000] Normal zone: 325632 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0xad800000-0xaf7fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 56 [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xa84a2000-0xa84c0fff] [ 0.000000] PM: Registered nosave memory: [mem 0xab1fb000-0xab762fff] [ 0.000000] PM: Registered nosave memory: [mem 0xab763000-0xab7b5fff] [ 0.000000] PM: Registered nosave memory: [mem 0xab7b6000-0xab7e1fff] [ 0.000000] PM: Registered nosave memory: [mem 0xab7ff000-0xad7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xad800000-0xaf7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xaf800000-0xe00f7fff] [ 0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff] [ 0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xff9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff] [ 0.000000] e820: [mem 0xaf800000-0xe00f7fff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88014f400000 s78336 r8192 d24064 u262144 [ 0.000000] pcpu-alloc: s78336 r8192 d24064 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1010392 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=kernels//kcloud/619f97296260053507a98bd7506ca0a249c294b5/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//kcloud/619f97296260053507a98bd7506ca0a249c294b5/modules_x86_64/lib/modules/3.16.0-rc2_kcloud_619f97_20140701+ acpi_rsdp=0xab7e1014 kexec_jump_back_entry=0x8ac57d78 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3936960K/4105812K available (7605K kernel code, 887K rwdata, 3928K rodata, 23068K init, 620K bss, 168852K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS:4352 nr_irqs:1016 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1795.853 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.70 BogoMIPS (lpj=1795853) [ 0.000008] pid_max: default: 32768 minimum: 301 [ 0.000016] ACPI: Core revision 20140424 [ 0.030795] ACPI: All ACPI Tables successfully acquired [ 0.030827] Security Framework initialized [ 0.031123] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.032126] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.032577] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.032586] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.032846] CPU: Physical Processor ID: 0 [ 0.032849] CPU: Processor Core ID: 0 [ 0.034061] mce: CPU supports 7 MCE banks [ 0.034074] CPU0: Thermal LVT vector (0xfa) already installed [ 0.034084] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.034084] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.034084] tlb_flushall_shift: 6 [ 0.034564] Freeing SMP alternatives memory: 32K (ffffffff832ac000 - ffffffff832b4000) [ 0.035243] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.045244] smpboot: CPU0: Intel(R) Core(TM) i5-5###U CPU @ 1.80GHz (fam: 06, model: 3d, stepping: 04) [ 0.045255] TSC deadline timer enabled [ 0.045283] Performance Events: PEBS fmt2+, generic architected perfmon, full-width counters, Intel PMU driver. [ 0.045291] ... version: 3 [ 0.045293] ... bit width: 48 [ 0.045296] ... generic registers: 4 [ 0.045298] ... value mask: 0000ffffffffffff [ 0.045300] ... max period: 0000ffffffffffff [ 0.045303] ... fixed-purpose events: 3 [ 0.045305] ... event mask: 000000070000000f [ 0.045635] x86: Booting SMP configuration: [ 0.045639] .... node #0, CPUs: #1 [ 0.058005] CPU1: Thermal LVT vector (0xfa) already installed [ 0.060134] #2<7>[ 0.072677] CPU2: Thermal LVT vector (0xfa) already installed [ 0.087166] #3 [ 0.087166] CPU3: Thermal LVT vector (0xfa) already installed [ 0.089240] x86: Booted up 1 node, 4 CPUs [ 0.089246] smpboot: Total of 4 processors activated (14366.82 BogoMIPS) [ 0.094434] devtmpfs: initialized [ 0.094851] PM: Registering ACPI NVS region [mem 0xab763000-0xab7b5fff] (339968 bytes) [ 0.095088] xor: automatically using best checksumming function: [ 0.104186] avx : 17208.000 MB/sec [ 0.104220] RTC time: 19:45:02, date: 06/29/14 [ 0.104284] NET: Registered protocol family 16 [ 0.104547] cpuidle: using governor ladder [ 0.104551] cpuidle: using governor menu [ 0.104696] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.104700] ACPI: bus type PCI registered [ 0.104747] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.104752] PCI: not using MMCONFIG [ 0.104754] PCI: Using configuration type 1 for base access [ 0.125227] raid6: sse2x1 5359 MB/s [ 0.142247] raid6: sse2x2 6613 MB/s [ 0.159271] raid6: sse2x4 7929 MB/s [ 0.176301] raid6: avx2x1 10468 MB/s [ 0.193323] raid6: avx2x2 12308 MB/s [ 0.210349] raid6: avx2x4 14394 MB/s [ 0.210352] raid6: using algorithm avx2x4 (14394 MB/s) [ 0.210354] raid6: using avx2x2 recovery algorithm [ 0.210402] ACPI: Added _OSI(Module Device) [ 0.210405] ACPI: Added _OSI(Processor Device) [ 0.210408] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.210410] ACPI: Added _OSI(Processor Aggregator Device) [ 0.223555] ACPI: Executed 18 blocks of module-level executable AML code [ 0.251511] ACPI: Dynamic OEM Table Load: [ 0.251531] ACPI: SSDT 0xFFFF880149C43800 0004AE (v01 PmRef Cpu0Cst 00003001 INTL 20130927) [ 0.256675] ACPI: Dynamic OEM Table Load: [ 0.256693] ACPI: SSDT 0xFFFF880149C44000 000792 (v01 PmRef ApIst 00003000 INTL 20130927) [ 0.262524] ACPI: Dynamic OEM Table Load: [ 0.262540] ACPI: SSDT 0xFFFF880149BA6000 000119 (v01 PmRef ApCst 00003000 INTL 20130927) [ 0.272870] ACPI: Interpreter enabled [ 0.272880] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580) [ 0.272890] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) [ 0.272917] ACPI: (supports S0 S3 S4 S5) [ 0.272920] ACPI: Using IOAPIC for interrupt routing [ 0.272946] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.275393] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.275658] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.276189] ACPI: Power Resource [PG00] (on) [ 0.281802] ACPI: Power Resource [PG01] (on) [ 0.285826] ACPI: Power Resource [PG02] (on) [ 0.315439] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1) [ 0.316890] ACPI: Power Resource [FN00] (off) [ 0.316977] ACPI: Power Resource [FN01] (off) [ 0.317060] ACPI: Power Resource [FN02] (off) [ 0.317143] ACPI: Power Resource [FN03] (off) [ 0.317224] ACPI: Power Resource [FN04] (off) [ 0.318231] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.318240] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.319182] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.319517] PCI host bridge to bus 0000:00 [ 0.319522] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.319525] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.319529] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.319532] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.319536] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff] [ 0.319539] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff] [ 0.319542] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff] [ 0.319545] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff] [ 0.319549] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 0.319552] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.319555] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.319558] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.319562] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 0.319565] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 0.319568] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff] [ 0.319572] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff] [ 0.319575] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff] [ 0.319578] pci_bus 0000:00: root bus resource [mem 0xaf800000-0xfeafffff] [ 0.319590] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000 [ 0.319855] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000 [ 0.319870] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit] [ 0.319879] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.319886] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.320137] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300 [ 0.320147] pci 0000:00:03.0: reg 0x10: [mem 0xc1030000-0xc1033fff 64bit] [ 0.320418] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330 [ 0.320438] pci 0000:00:14.0: reg 0x10: [mem 0xc1020000-0xc102ffff 64bit] [ 0.320501] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.320707] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.320759] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000 [ 0.320779] pci 0000:00:16.0: reg 0x10: [mem 0xc1035000-0xc103501f 64bit] [ 0.320844] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.321091] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000 [ 0.321109] pci 0000:00:19.0: reg 0x10: [mem 0xc1000000-0xc101ffff] [ 0.321118] pci 0000:00:19.0: reg 0x14: [mem 0xc1038000-0xc1038fff] [ 0.321127] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f] [ 0.321189] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.321390] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.321446] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100 [ 0.321794] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601 [ 0.321810] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af] [ 0.321818] pci 0000:00:1f.2: reg 0x14: [io 0x30b4-0x30b7] [ 0.321825] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7] [ 0.321834] pci 0000:00:1f.2: reg 0x1c: [io 0x30b0-0x30b3] [ 0.321841] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.321849] pci 0000:00:1f.2: reg 0x24: [mem 0xc1037000-0xc10377ff] [ 0.321889] pci 0000:00:1f.2: PME# supported from D3hot [ 0.322119] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500 [ 0.322135] pci 0000:00:1f.3: reg 0x10: [mem 0xc1034000-0xc10340ff 64bit] [ 0.322156] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.322405] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000 [ 0.322434] pci 0000:00:1f.6: reg 0x10: [mem 0xc1036000-0xc1036fff 64bit] [ 0.322747] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported) [ 0.325154] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.325214] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.325271] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.325325] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.325380] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.325435] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.325490] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.325548] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.326121] ACPI: Enabled 4 GPEs in block 00 to 7F [ 0.326355] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62 [ 0.326467] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.326472] vgaarb: loaded [ 0.326475] vgaarb: bridge control possible 0000:00:02.0 [ 0.326569] SCSI subsystem initialized [ 0.326632] libata version 3.00 loaded. [ 0.326681] ACPI: bus type USB registered [ 0.326716] usbcore: registered new interface driver usbfs [ 0.326733] usbcore: registered new interface driver hub [ 0.326764] usbcore: registered new device driver usb [ 0.326810] pps_core: LinuxPPS API ver. 1 registered [ 0.326814] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.326825] PTP clock support registered [ 0.326910] PCI: Using ACPI for IRQ routing [ 0.332981] PCI: pci_cache_line_size set to 64 bytes [ 0.333013] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.333015] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.333017] e820: reserve RAM buffer [mem 0xa84a2000-0xabffffff] [ 0.333019] e820: reserve RAM buffer [mem 0xab1fb000-0xabffffff] [ 0.333021] e820: reserve RAM buffer [mem 0xab7ff000-0xabffffff] [ 0.333023] e820: reserve RAM buffer [mem 0x14f800000-0x14fffffff] [ 0.333168] NetLabel: Initializing [ 0.333171] NetLabel: domain hash size = 128 [ 0.333173] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.333189] NetLabel: unlabeled traffic allowed by default [ 0.333341] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.333350] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.335383] Switched to clocksource hpet [ 0.339300] pnp: PnP ACPI init [ 0.339314] ACPI: bus type PNP registered [ 0.339637] system 00:00: [io 0x06a4] has been reserved [ 0.339642] system 00:00: [io 0x06a0] has been reserved [ 0.339647] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.339859] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.339863] system 00:01: [io 0xffff] has been reserved [ 0.339866] system 00:01: [io 0xffff] has been reserved [ 0.339870] system 00:01: [io 0xffff] has been reserved [ 0.339873] system 00:01: [io 0x1800-0x18fe] could not be reserved [ 0.339877] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.339881] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.339938] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.339983] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.339988] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.340121] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.340256] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.340911] system 00:06: [mem 0xfe102000-0xfe102fff] has been reserved [ 0.340916] system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved [ 0.340919] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved [ 0.340923] system 00:06: [mem 0xfe10e000-0xfe10efff] has been reserved [ 0.340927] system 00:06: [mem 0xfe112000-0xfe112fff] has been reserved [ 0.340931] system 00:06: [mem 0xfe111000-0xfe111007] has been reserved [ 0.340934] system 00:06: [mem 0xfe111014-0xfe111fff] has been reserved [ 0.340938] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.342229] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.342233] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.342237] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.342241] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.342247] system 00:07: [mem 0xe0000000-0xefffffff] could not be reserved [ 0.342250] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.342254] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.342258] system 00:07: [mem 0xfed45000-0xfed8ffff] could not be reserved [ 0.342261] system 00:07: [mem 0xff000000-0xffffffff] could not be reserved [ 0.342265] system 00:07: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.342269] system 00:07: [mem 0xaf810000-0xaf81ffff] has been reserved [ 0.342272] system 00:07: [mem 0xaf800000-0xaf80ffff] has been reserved [ 0.342276] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.342588] system 00:08: [mem 0x00000000-0x0009cfff] could not be reserved [ 0.342592] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.342738] pnp: PnP ACPI: found 9 devices [ 0.342741] ACPI: bus type PNP unregistered [ 0.349666] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.349672] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.349674] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.349677] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff] [ 0.349680] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff] [ 0.349683] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff] [ 0.349685] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff] [ 0.349687] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff] [ 0.349689] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff] [ 0.349691] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff] [ 0.349693] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff] [ 0.349695] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff] [ 0.349697] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff] [ 0.349699] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff] [ 0.349700] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff] [ 0.349702] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff] [ 0.349704] pci_bus 0000:00: resource 20 [mem 0xaf800000-0xfeafffff] [ 0.349736] NET: Registered protocol family 2 [ 0.349929] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.350018] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.350096] TCP: Hash tables configured (established 32768 bind 32768) [ 0.350121] TCP: reno registered [ 0.350132] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.350151] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.350212] NET: Registered protocol family 1 [ 0.350287] RPC: Registered named UNIX socket transport module. [ 0.350290] RPC: Registered udp transport module. [ 0.350292] RPC: Registered tcp transport module. [ 0.350294] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.350306] pci 0000:00:02.0: Boot video device [ 0.350410] pci 0000:00:14.0: can't derive routing for PCI INT A [ 0.350414] pci 0000:00:14.0: PCI INT A: no GSI [ 0.350504] pci 0000:00:14.0: can't derive routing for PCI INT A [ 0.350522] PCI: CLS 0 bytes, default 64 [ 0.872714] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.872722] software IO TLB [mem 0xa44a2000-0xa84a2000] (64MB) mapped at [ffff8800a44a2000-ffff8800a84a1fff] [ 0.872885] Simple Boot Flag at 0x47 set to 0x1 [ 0.873833] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.873888] audit: initializing netlink subsys (disabled) [ 0.873900] audit: type=2000 audit(1404071102.827:1): initialized [ 0.874164] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.876670] VFS: Disk quotas dquot_6.5.2 [ 0.876717] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.877657] NFS: Registering the id_resolver key type [ 0.877671] Key type id_resolver registered [ 0.877674] Key type id_legacy registered [ 0.877682] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.877876] fuse init (API version 7.23) [ 0.878001] msgmni has been set to 7689 [ 0.878263] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.878271] io scheduler noop registered [ 0.878276] io scheduler deadline registered [ 0.878318] io scheduler cfq registered (default) [ 0.878425] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.878500] efifb: probing for efifb [ 0.878525] efifb: framebuffer at 0xb0000000, mapped to 0xffffc90010880000, using 8100k, total 8100k [ 0.878530] efifb: mode is 1920x1080x32, linelength=7680, pages=2032 [ 0.878533] efifb: scrolling: redraw [ 0.878536] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.885260] Console: switching to colour frame buffer device 240x67 [ 0.891525] fb0: EFI VGA frame buffer device [ 0.891661] ACPI: Fan [FAN0] (off) [ 0.891721] ACPI: Fan [FAN1] (off) [ 0.891780] ACPI: Fan [FAN2] (off) [ 0.891837] ACPI: Fan [FAN3] (off) [ 0.891896] ACPI: Fan [FAN4] (off) [ 0.892318] Monitor-Mwait will be used to enter C-1 state [ 0.894140] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.894174] ACPI: Thermal Zone [TZ00] (45 C) [ 0.894930] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.894961] ACPI: Thermal Zone [TZ01] (45 C) [ 0.895040] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.915713] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.916268] Non-volatile memory driver v1.3 [ 0.916297] Linux agpgart interface v0.103 [ 0.917838] brd: module loaded [ 0.917991] Loading iSCSI transport class v2.0-870. [ 0.918216] iscsi: registered transport (tcp) [ 0.918353] Adaptec aacraid driver 1.2-0[30300]-ms [ 0.918420] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 0.918572] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.08-k. [ 0.918678] iscsi: registered transport (qla4xxx) [ 0.918724] QLogic iSCSI HBA Driver [ 0.918790] DC390: clustering now enabled by default. If you get problems load [ 0.918838] with "disable_clustering=1" and report to maintainers [ 0.918909] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 0.919001] RocketRAID 3xxx/4xxx Controller driver v1.8 [ 0.919054] stex: Promise SuperTrak EX Driver version: 4.6.0000.4 [ 0.919138] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 0.919215] osst :I: Tape driver with OnStream support version 0.99.4 [ 0.919215] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 0.919368] SCSI Media Changer driver v0.25 [ 0.919438] ahci 0000:00:1f.2: version 3.0 [ 0.919566] ahci 0000:00:1f.2: irq 56 for MSI/MSI-X [ 0.930212] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x2 impl SATA mode [ 0.930258] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 0.930616] scsi0 : ahci [ 0.930733] scsi1 : ahci [ 0.930798] ata1: DUMMY [ 0.930815] ata2: SATA max UDMA/133 abar m2048@0xc1037000 port 0xc1037180 irq 56 [ 0.933211] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.20 (March 14, 2014) [ 0.934639] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.19-0 (2014/02/10) [ 0.936151] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 0.937591] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.939032] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 0.940469] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.941927] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 0.943360] e1000e: Copyright(c) 1999 - 2014 Intel Corporation. [ 0.944941] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.946430] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X [ 1.110586] e1000e 0000:00:19.0 eth0: registered PHC clock [ 1.112055] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:13:20:fc:d6:b4 [ 1.113538] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.115030] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 1.116508] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k [ 1.117975] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.119487] usbcore: registered new interface driver catc [ 1.120989] usbcore: registered new interface driver kaweth [ 1.122467] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.123965] usbcore: registered new interface driver pegasus [ 1.125465] usbcore: registered new interface driver rtl8150 [ 1.126937] usbcore: registered new interface driver asix [ 1.128386] usbcore: registered new interface driver ax88179_178a [ 1.129823] usbcore: registered new interface driver cdc_ether [ 1.131251] usbcore: registered new interface driver dm9601 [ 1.132656] usbcore: registered new interface driver gl620a [ 1.134041] usbcore: registered new interface driver net1080 [ 1.135423] usbcore: registered new interface driver plusb [ 1.136803] usbcore: registered new interface driver rndis_host [ 1.138191] usbcore: registered new interface driver cdc_subset [ 1.139579] usbcore: registered new interface driver zaurus [ 1.140969] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 1.142375] usbcore: registered new interface driver cdc_ncm [ 1.143853] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.145240] ehci-pci: EHCI PCI platform driver [ 1.146640] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.148024] ohci-pci: OHCI PCI platform driver [ 1.149398] uhci_hcd: USB Universal Host Controller Interface driver [ 1.150871] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A [ 1.152249] xhci_hcd 0000:00:14.0: PCI INT A: no GSI [ 1.153625] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.155021] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.156484] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.156503] xhci_hcd 0000:00:14.0: irq 58 for MSI/MSI-X [ 1.156567] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.157943] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.159317] usb usb1: Product: xHCI Host Controller [ 1.160666] usb usb1: Manufacturer: Linux 3.16.0-rc2_kcloud_619f97_20140701+ xhci_hcd [ 1.162023] usb usb1: SerialNumber: 0000:00:14.0 [ 1.163497] hub 1-0:1.0: USB hub found [ 1.164851] hub 1-0:1.0: 11 ports detected [ 1.169785] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.171142] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.172502] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.173832] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.175160] usb usb2: Product: xHCI Host Controller [ 1.176475] usb usb2: Manufacturer: Linux 3.16.0-rc2_kcloud_619f97_20140701+ xhci_hcd [ 1.177811] usb usb2: SerialNumber: 0000:00:14.0 [ 1.179238] hub 2-0:1.0: USB hub found [ 1.180552] hub 2-0:1.0: 4 ports detected [ 1.182771] usb: failed to peer usb2-port3 and usb1-port5 by location (usb2-port3:none) (usb1-port5:usb2-port2) [ 1.184097] usb usb2-port3: failed to peer to usb1-port5 (-16) [ 1.185438] usb: port power management may be unreliable [ 1.187331] usbcore: registered new interface driver usb-storage [ 1.188732] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.190090] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.191910] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.193335] mousedev: PS/2 mouse device common for all mice [ 1.194797] rtc_cmos 00:02: RTC can wake from S4 [ 1.196290] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.197657] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.199012] i2c /dev entries driver [ 1.200419] hidraw: raw HID events driver (C) Jiri Kosina [ 1.202000] usbcore: registered new interface driver usbhid [ 1.203325] usbhid: USB HID core driver [ 1.204710] TCP: cubic registered [ 1.206027] Initializing XFRM netlink socket [ 1.207337] NET: Registered protocol family 17 [ 1.208653] Key type dns_resolver registered [ 1.210377] registered taskstats version 1 [ 1.212119] Btrfs loaded [ 1.213679] Magic number: 2:432:800 [ 1.215005] acpi PNP0C09:01: hash matches [ 1.216339] PM: Hibernation image not present or could not be loaded. [ 1.216356] Warning: unable to open an initial console. [ 1.232842] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.238096] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.239702] ata2.00: ATA-9: INTEL SSDSC2BB240G4, D2010370, max UDMA/133 [ 1.241064] ata2.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 1.242733] ata2.00: configured for UDMA/133 [ 1.244219] scsi 1:0:0:0: Direct-Access ATA INTEL SSDSC2BB24 0370 PQ: 0 ANSI: 5 [ 1.245843] sd 1:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB) [ 1.245846] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 1.248762] sd 1:0:0:0: [sda] 4096-byte physical blocks [ 1.250261] sd 1:0:0:0: [sda] Write Protect is off [ 1.251724] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.251736] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.254640] sda: sda1 sda2 sda3 [ 1.256401] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.262661] Freeing unused kernel memory: 23068K (ffffffff81c25000 - ffffffff832ac000) [ 1.300578] dracut: dracut-018-35.git20120510.fc17 [ 1.331037] udevd[1411]: starting version 182 [ 1.348562] [drm] Initialized drm 1.1.0 20060810 [ 1.351790] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 1.355233] ACPI: Lid Switch [LID0] [ 1.358092] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 1.360517] ACPI: Power Button [PWRB] [ 1.362372] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3 [ 1.364211] ACPI: Sleep Button [SLPB] [ 1.364297] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 1.364462] ACPI: Power Button [PWRF] [ 1.367790] [drm:i915_dump_device_info] i915 device info: gen=8, pciid=0x1616 rev=0x07 flags=is_mobile,need_gfx_hws,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg, [ 1.367790] [drm:intel_detect_pch] This is Broadwell, assuming LynxPoint LP PCH [ 1.367860] [drm] Memory usable by graphics device = 4096M [ 1.367861] [drm:i915_gem_gtt_init] GMADR size = 256M [ 1.367862] [drm:i915_gem_gtt_init] GTT stolen size = 32M [ 1.367862] [drm:i915_gem_gtt_init] ppgtt mode: 1 [ 1.367863] [drm] Replacing VGA console driver [ 1.379754] Console: switching to colour dummy device 80x25 [ 1.379761] checking generic (b0000000 7e9000) vs hw (b0000000 10000000) [ 1.379764] fb: switching to inteldrmfb from EFI VGA [ 1.380683] [drm:intel_opregion_setup] graphic opregion physical addr: 0xab795018 [ 1.380698] [drm:intel_opregion_setup] Public ACPI methods supported [ 1.380700] [drm:intel_opregion_setup] SWSCI supported [ 1.386038] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00700483 [ 1.386040] [drm:intel_opregion_setup] ASLE supported [ 1.386170] i915 0000:00:02.0: irq 59 for MSI/MSI-X [ 1.386180] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.386184] [drm] Driver supports precise vblank timestamp query. [ 1.386188] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz [ 1.386190] [drm:validate_vbt] Using VBT from OpRegion: $VBT HASWELL d [ 1.386193] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 1.386195] [drm:parse_general_definitions] crt_ddc_bus_pin: 2 [ 1.386197] [drm:parse_lfp_panel_data] DRRS supported mode is seamless [ 1.386199] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [ 1.386203] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 1.386205] [drm:parse_lfp_panel_data] VBT initial LVDS value 300 [ 1.386208] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255 [ 1.386210] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables: [ 1.386213] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 1.386215] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT [ 1.386217] [drm:parse_driver_features] DRRS State Enabled:1 [ 1.386219] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 [ 1.386221] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0 [ 1.386223] [drm:parse_ddi_port] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.386225] [drm:parse_ddi_port] VBT HDMI level shift for port B: 3 [ 1.386227] [drm:parse_ddi_port] Port C VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.386229] [drm:parse_ddi_port] VBT HDMI level shift for port C: 3 [ 1.386231] [drm:parse_ddi_port] Port D VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.386232] [drm:parse_ddi_port] VBT HDMI level shift for port D: 3 [ 1.386299] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 1.386305] [drm:i915_gem_init_stolen] found 33554432 bytes of stolen memory at ad800000 [ 1.386307] [drm:intel_display_power_get] enabling always-on [ 1.386309] [drm:intel_display_power_get] enabling display [ 1.386314] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.386419] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec) [ 1.386421] [drm:intel_print_wm_latency] Primary WM1 latency 50 (25.0 usec) [ 1.386423] [drm:intel_print_wm_latency] Primary WM2 latency 90 (45.0 usec) [ 1.386425] [drm:intel_print_wm_latency] Primary WM3 latency 130 (65.0 usec) [ 1.386426] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec) [ 1.386428] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec) [ 1.386430] [drm:intel_print_wm_latency] Sprite WM1 latency 50 (25.0 usec) [ 1.386431] [drm:intel_print_wm_latency] Sprite WM2 latency 90 (45.0 usec) [ 1.386433] [drm:intel_print_wm_latency] Sprite WM3 latency 130 (65.0 usec) [ 1.386435] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec) [ 1.386437] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec) [ 1.386438] [drm:intel_print_wm_latency] Cursor WM1 latency 50 (25.0 usec) [ 1.386440] [drm:intel_print_wm_latency] Cursor WM2 latency 90 (45.0 usec) [ 1.386441] [drm:intel_print_wm_latency] Cursor WM3 latency 130 (65.0 usec) [ 1.386443] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec) [ 1.386446] [drm:intel_modeset_init] 3 display pipes available. [ 1.386460] [drm:intel_ddi_pll_init] CDCLK running at 675000KHz [ 1.386768] [drm:intel_dp_init_connector] Adding eDP connector on port A [ 1.386824] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000 [ 1.386827] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 1.386829] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600 [ 1.386831] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200 [ 1.386834] [drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1 [ 1.386924] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 1.386935] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 1.387216] [drm:intel_dp_get_dpcd] DPCD: 11 0a 02 00 00 00 00 00 00 00 00 00 00 00 00 [ 1.387393] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 [ 1.397231] random: nonblocking pool is initialized [ 1.410815] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.410817] [drm] seamless DRRS supported for eDP panel. [ 1.410856] [drm:intel_panel_setup_backlight] backlight initialized, enabled, brightness 937/937, sysfs interface registered [ 1.410872] [drm:intel_dp_init_connector] Adding DP connector on port B [ 1.410923] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1 [ 1.415035] [drm:intel_modeset_readout_hw_state] [CRTC:6] hw state readout: enabled [ 1.415038] [drm:intel_modeset_readout_hw_state] [CRTC:10] hw state readout: disabled [ 1.415042] [drm:intel_modeset_readout_hw_state] [CRTC:14] hw state readout: disabled [ 1.415045] [drm:intel_ddi_get_crtc_pll] Pipe A connected to port A using clock 0x20000000 [ 1.415052] [drm:intel_ddi_get_config] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp [ 1.415054] [drm:intel_modeset_readout_hw_state] [ENCODER:16:TMDS-16] hw state readout: enabled, pipe A [ 1.415057] [drm:intel_modeset_readout_hw_state] [ENCODER:26:TMDS-26] hw state readout: disabled, pipe A [ 1.415059] [drm:intel_modeset_readout_hw_state] [ENCODER:29:TMDS-29] hw state readout: disabled, pipe A [ 1.415063] [drm:intel_modeset_readout_hw_state] [CONNECTOR:17:eDP-1] hw state readout: enabled [ 1.415065] [drm:intel_modeset_readout_hw_state] [CONNECTOR:27:DP-1] hw state readout: disabled [ 1.415068] [drm:intel_modeset_readout_hw_state] [CONNECTOR:28:HDMI-A-1] hw state readout: disabled [ 1.415070] [drm:intel_modeset_readout_hw_state] [CONNECTOR:30:HDMI-A-2] hw state readout: disabled [ 1.415074] [drm:intel_dump_pipe_config] [CRTC:6][setup_hw_state] config for pipe A [ 1.415075] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 1.415077] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.415079] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.415082] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 1.415083] [drm:intel_dump_pipe_config] requested mode: [ 1.415086] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 1920 0 0 0 1080 0 0 0 0x0 0x0 [ 1.415088] [drm:intel_dump_pipe_config] adjusted mode: [ 1.415090] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa [ 1.415093] [drm:intel_dump_crtc_timings] crtc timings: 138779 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x0 flags: 0xa [ 1.415094] [drm:intel_dump_pipe_config] port clock: 270000 [ 1.415096] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 1.415098] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.415100] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.415101] [drm:intel_dump_pipe_config] ips: 0 [ 1.415103] [drm:intel_dump_pipe_config] double wide: 0 [ 1.415106] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B [ 1.415108] [drm:i915_get_vblank_timestamp] crtc 1 is disabled [ 1.415111] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B [ 1.415114] [drm:intel_dump_pipe_config] [CRTC:10][setup_hw_state] config for pipe B [ 1.415115] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 1.415116] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 1.415119] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.415121] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.415122] [drm:intel_dump_pipe_config] requested mode: [ 1.415124] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.415126] [drm:intel_dump_pipe_config] adjusted mode: [ 1.415128] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.415130] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.415132] [drm:intel_dump_pipe_config] port clock: 0 [ 1.415133] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 1.415135] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.415137] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.415138] [drm:intel_dump_pipe_config] ips: 0 [ 1.415140] [drm:intel_dump_pipe_config] double wide: 0 [ 1.415143] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C [ 1.415144] [drm:i915_get_vblank_timestamp] crtc 2 is disabled [ 1.415148] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C [ 1.415150] [drm:intel_dump_pipe_config] [CRTC:14][setup_hw_state] config for pipe C [ 1.415151] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 1.415152] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 1.415155] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.415156] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.415158] [drm:intel_dump_pipe_config] requested mode: [ 1.415160] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.415161] [drm:intel_dump_pipe_config] adjusted mode: [ 1.415164] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.415166] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.415167] [drm:intel_dump_pipe_config] port clock: 0 [ 1.415169] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 1.415171] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.415172] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.415174] [drm:intel_dump_pipe_config] ips: 0 [ 1.415175] [drm:intel_dump_pipe_config] double wide: 0 [ 1.415185] [drm:intel_connector_check_state] [CONNECTOR:17:eDP-1] [ 1.415190] [drm:check_encoder_state] [ENCODER:16:TMDS-16] [ 1.415193] [drm:check_encoder_state] [ENCODER:26:TMDS-26] [ 1.415195] [drm:check_encoder_state] [ENCODER:29:TMDS-29] [ 1.415197] [drm:check_crtc_state] [CRTC:6] [ 1.415210] [drm:check_crtc_state] [CRTC:10] [ 1.415212] [drm:check_crtc_state] [CRTC:14] [ 1.415219] [drm:ironlake_get_plane_config] pipe/plane 0/0 with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000 [ 1.415222] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000 [ 1.415227] [drm:i915_pages_create_for_stolen] offset=0x0, size=8294400 [ 1.415231] [drm:intel_alloc_plane_obj] plane fb obj ffff880002c24000 [ 1.415234] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 7e9000 [ 1.415236] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [7e9000, fffff000] [ 1.418452] [drm:gen8_ppgtt_init] Allocated 4 pages for page directories (0 wasted) [ 1.418455] [drm:gen8_ppgtt_init] Allocated 2048 pages for page tables (0 wasted) [ 1.418458] [drm:i915_gem_context_init] HW context support initialized [ 1.418479] [drm:init_status_page] render ring hws offset: 0x007fb000 [ 1.418561] [drm:init_pipe_control] render ring pipe control offset: 0x0081c000 [ 1.418568] [drm:init_status_page] bsd ring hws offset: 0x0081d000 [ 1.418634] [drm:init_status_page] blitter ring hws offset: 0x0083e000 [ 1.418692] [drm:init_status_page] video enhancement ring hws offset: 0x0085f000 [ 1.418957] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:eDP-1] [ 1.418960] [drm:intel_dp_detect] [CONNECTOR:17:eDP-1] [ 1.418970] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.418975] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:eDP-1] probed modes : [ 1.418979] [drm:drm_mode_debug_printmodeline] Modeline 18:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.418982] [drm:drm_mode_debug_printmodeline] Modeline 19:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa [ 1.418983] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1] [ 1.418985] [drm:intel_dp_detect] [CONNECTOR:27:DP-1] [ 1.418997] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1] disconnected [ 1.418999] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:HDMI-A-1] [ 1.419001] [drm:intel_hdmi_detect] [CONNECTOR:28:HDMI-A-1] [ 1.419162] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 1.419164] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 1.419166] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:HDMI-A-1] disconnected [ 1.419168] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-2] [ 1.419170] [drm:intel_hdmi_detect] [CONNECTOR:30:HDMI-A-2] [ 1.419325] [drm:gen8_irq_handler] *ERROR* The master control interrupt lied (SDE)! [ 1.419341] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 1.419343] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 1.419345] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-2] disconnected [ 1.419346] [drm:drm_setup_crtcs] [ 1.419348] [drm:drm_enable_connectors] connector 17 enabled? yes [ 1.419350] [drm:drm_enable_connectors] connector 27 enabled? no [ 1.419351] [drm:drm_enable_connectors] connector 28 enabled? no [ 1.419353] [drm:drm_enable_connectors] connector 30 enabled? no [ 1.419355] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 1.419357] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 [ 1.419359] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:6]: 1920x1080 [ 1.419361] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 1.419362] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 1.419364] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 1.419366] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 6 [ 1.419368] [drm:intelfb_create] no BIOS fb, allocating a new one [ 1.419370] [drm:i915_gem_object_create_stolen] creating stolen object: size=7e9000 [ 1.419373] [drm:i915_pages_create_for_stolen] offset=0x7e9000, size=8294400 [ 1.420304] [drm:intelfb_create] allocated 1920x1080 fb: 0x00881000, bo ffff880002c25500 [ 1.420389] fbcon: inteldrmfb (fb0) is primary device [ 1.420441] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0) [ 1.420443] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set [ 1.420447] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.420450] [drm:drm_mode_debug_printmodeline] Modeline 32:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.420451] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=1, fb_changed=1 [ 1.420453] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6] [ 1.420455] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 1.420457] [drm:connected_sink_compute_bpp] [CONNECTOR:17:eDP-1] checking for sink bpp constrains [ 1.420460] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 1.420462] [drm:intel_dp_compute_config] forcing lane count to max (2) on BDW [ 1.420463] [drm:intel_dp_compute_config] using min 06 link bw per VBT [ 1.420470] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 1.420471] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 1.420473] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 1.420474] [drm:intel_dump_pipe_config] [CRTC:6][modeset] config for pipe A [ 1.420475] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 1.420476] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.420478] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.420479] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 1.420480] [drm:intel_dump_pipe_config] requested mode: [ 1.420482] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.420483] [drm:intel_dump_pipe_config] adjusted mode: [ 1.420484] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.420486] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 1.420487] [drm:intel_dump_pipe_config] port clock: 270000 [ 1.420488] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 1.420489] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.420490] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.420491] [drm:intel_dump_pipe_config] ips: 1 [ 1.420492] [drm:intel_dump_pipe_config] double wide: 0 [ 1.420508] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 1.420515] [drm:intel_edp_backlight_off] [ 1.434195] [drm:intel_edp_panel_off] Turn eDP power off [ 1.531994] usb 1-1: new low-speed USB device number 2 using xhci_hcd [ 1.620947] [drm:wait_panel_off] Wait for panel power off time [ 1.620951] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 1.675928] [drm:wait_panel_status] Wait complete [ 1.675932] [drm:intel_update_fbc] no output, disabling [ 1.675936] [drm:intel_display_power_put] disabling display [ 1.675938] [drm:hsw_set_power_well] Requesting to disable the power well [ 1.675960] [drm:ironlake_update_primary_plane] Writing base 00881000 00000000 0 0 7680 [ 1.675968] [drm:intel_edp_panel_on] Turn eDP power on [ 1.675971] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 1.701262] usb 1-1: New USB device found, idVendor=413c, idProduct=2107 [ 1.701264] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.701265] usb 1-1: Product: Dell USB Entry Keyboard [ 1.701266] usb 1-1: Manufacturer: DELL [ 1.701356] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1.704314] input: DELL Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:413C:2107.0001/input/input5 [ 1.704427] hid-generic 0003:413C:2107.0001: input,hidraw0: USB HID v1.11 Keyboard [DELL Dell USB Entry Keyboard] on usb-0000:00:14.0-1/input0 [ 1.856882] usb 1-5: new low-speed USB device number 3 using xhci_hcd [ 1.872859] tsc: Refined TSC clocksource calibration: 1795.845 MHz [ 2.024145] usb 1-5: New USB device found, idVendor=046d, idProduct=c05a [ 2.024147] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.024148] usb 1-5: Product: USB Optical Mouse [ 2.024149] usb 1-5: Manufacturer: Logitech [ 2.024236] usb 1-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.026092] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:046D:C05A.0002/input/input6 [ 2.026228] hid-generic 0003:046D:C05A.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-5/input0 [ 2.178762] usb 1-6: new low-speed USB device number 4 using xhci_hcd [ 2.221735] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000 [ 2.232728] [drm:wait_panel_status] Wait complete [ 2.232732] [drm:wait_panel_on] Wait for panel power on [ 2.232735] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003 [ 2.346209] usb 1-6: New USB device found, idVendor=046d, idProduct=c077 [ 2.346210] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.346212] usb 1-6: Product: USB Optical Mouse [ 2.346213] usb 1-6: Manufacturer: Logitech [ 2.346299] usb 1-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.347973] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:046D:C077.0003/input/input7 [ 2.348118] hid-generic 0003:046D:C077.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6/input0 [ 2.441652] [drm:wait_panel_status] Wait complete [ 2.441657] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 2.441665] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 2.442769] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 2.443246] [drm:intel_dp_start_link_train] clock recovery OK [ 2.444022] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful [ 2.444316] [drm:intel_edp_backlight_on] [ 2.444320] [drm:intel_panel_enable_backlight] pipe A [ 2.444326] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 2.444329] [drm:intel_edp_psr_enable] PSR not supported by this panel [ 2.479637] [drm:intel_update_fbc] disabled per chip default [ 2.479642] [drm:intel_connector_check_state] [CONNECTOR:17:eDP-1] [ 2.479646] [drm:check_encoder_state] [ENCODER:16:TMDS-16] [ 2.479648] [drm:check_encoder_state] [ENCODER:26:TMDS-26] [ 2.479650] [drm:check_encoder_state] [ENCODER:29:TMDS-29] [ 2.479651] [drm:check_crtc_state] [CRTC:6] [ 2.479663] [drm:check_crtc_state] [CRTC:10] [ 2.479664] [drm:check_crtc_state] [CRTC:14] [ 2.479667] [drm:intel_crtc_set_config] [CRTC:10] [NOFB] [ 2.479669] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0 [ 2.479670] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6] [ 2.479672] [drm:intel_crtc_set_config] [CRTC:14] [NOFB] [ 2.479673] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0 [ 2.479674] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6] [ 2.479680] Console: switching to colour frame buffer device 240x67 [ 2.479687] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0) [ 2.479689] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 2.479690] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6] [ 2.487621] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.487655] i915 0000:00:02.0: registered panic notifier [ 2.494121] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.494249] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8 [ 2.494444] [drm] Initialized i915 1.6.0 20140606 for 0000:00:02.0 on minor 0 [ 2.498578] dracut: Starting plymouth daemon [ 2.506236] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0) [ 2.506239] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 2.506241] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6] [ 2.516290] [drm:i915_gem_open] [ 2.516320] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0) [ 2.516324] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 2.516327] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6] [ 2.516329] [drm:intel_crtc_set_config] [CRTC:10] [NOFB] [ 2.516332] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0 [ 2.516334] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6] [ 2.516335] [drm:intel_crtc_set_config] [CRTC:14] [NOFB] [ 2.516337] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0 [ 2.516339] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6] [ 2.516349] [drm:i915_gem_open] [ 2.516360] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0) [ 2.516363] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 2.516364] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6] [ 2.516366] [drm:intel_crtc_set_config] [CRTC:10] [NOFB] [ 2.516368] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0 [ 2.516370] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6] [ 2.516371] [drm:intel_crtc_set_config] [CRTC:14] [NOFB] [ 2.516373] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0 [ 2.516375] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6] [ 2.516381] [drm:i915_gem_open] [ 2.516649] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0) [ 2.516653] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 2.516656] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6] [ 2.516659] [drm:intel_crtc_set_config] [CRTC:10] [NOFB] [ 2.516662] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0 [ 2.516665] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6] [ 2.516667] [drm:intel_crtc_set_config] [CRTC:14] [NOFB] [ 2.516670] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0 [ 2.516673] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6] [ 2.516840] dracut: error: unexpectedly disconnected from boot status daemon [ 2.522501] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0) [ 2.522504] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 2.522506] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6] [ 2.585887] ACPI: AC Adapter [ADP1] (on-line) [ 2.616021] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 2.616132] ACPI: Battery Slot [BAT0] (battery present) [ 2.616262] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 2.616363] ACPI: Battery Slot [BAT1] (battery absent) [ 2.616537] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 2.616641] ACPI: Battery Slot [BAT2] (battery absent) [ 2.628030] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 2.631829] [drm:intel_display_power_get] enabling display [ 2.631834] [drm:hsw_set_power_well] Enabling power well [ 2.631874] snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X [ 2.631952] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003) [ 2.635881] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 2.644304] ACPI Warning: SystemIO range 0x000000000000efa0-0x000000000000efbf conflicts with OpRegion 0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258) [ 2.649349] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.668235] EXT4-fs (sda2): INFO: recovery required on readonly filesystem [ 2.672266] EXT4-fs (sda2): write access will be enabled during recovery [ 2.683905] iTCO_vendor_support: vendor-support=0 [ 2.686611] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0) [ 2.686615] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 2.686617] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6] [ 2.686729] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 2.686767] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860) [ 2.686907] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 2.694544] ppdev: user-space parallel port driver [ 2.711945] EXT4-fs (sda2): recovery complete [ 2.714380] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 2.736833] dracut: Checking ext4: /dev/sda2 [ 2.739219] dracut: issuing e2fsck -a /dev/sda2 [ 2.750427] dracut: /dev/sda2: clean, 822866/13598720 files, 25425368/54372608 blocks [ 2.752554] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 2.755309] dracut: Remounting /dev/sda2 with -o errors=remount-ro,ro [ 2.768409] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 2.774254] dracut: Mounted root filesystem /dev/sda2 [ 2.787175] device-mapper: uevent: version 1.0.3 [ 2.789585] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 2.820242] dracut: Switching root [ 2.872520] Switched to clocksource tsc [ 2.882798] init: ureadahead main process (2782) terminated with status 5 [ 2.982209] systemd-udevd[2893]: starting version 204 [ 3.141678] systemd-udevd[3549]: could not open moddep file '/lib/modules/3.16.0-rc2_kcloud_619f97_20140701+/modules.dep.bin' [ 3.162104] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0) [ 3.162108] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 3.162111] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6] [ 3.181950] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0) [ 3.181954] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 3.181957] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6] [ 3.194815] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0) [ 3.194819] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 3.194822] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6] [ 3.260524] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0) [ 3.260528] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 3.260530] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6] [ 3.269862] Adding 16440316k swap on /dev/sda3. Priority:-1 extents:1 across:16440316k SS [ 3.284162] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 3.307105] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory [ 3.309246] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory [ 3.346134] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory [ 3.349205] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory [ 3.368206] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory [ 3.371830] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory [ 3.463499] init: Failed to spawn bluetooth main process: unable to execute: No such file or directory [ 3.552642] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory [ 3.557481] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory [ 3.567942] init: failsafe main process (3775) killed by TERM signal [ 3.647890] init: avahi-cups-reload main process (3923) terminated with status 1 [ 3.740957] init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory [ 3.831316] e1000e 0000:00:19.0: irq 61 for MSI/MSI-X [ 3.925574] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0) [ 3.925579] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 3.925581] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6] [ 3.935314] e1000e 0000:00:19.0: irq 62 for MSI/MSI-X [ 3.959009] init: lightdm main process (4062) terminated with status 1 [ 3.965471] init: plymouth-ready (started) main process (3639) terminated with status 1 [ 4.395945] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 4.395957] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 6.664777] e1000e: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 8.863962] init: failsafe-x main process (4160) terminated with status 127 [ 35.566039] [drm:i915_gem_open] [ 35.566071] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0) [ 35.566075] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 35.566077] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6] [ 35.566080] [drm:intel_crtc_set_config] [CRTC:10] [NOFB] [ 35.566083] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0 [ 35.566085] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6] [ 35.566086] [drm:intel_crtc_set_config] [CRTC:14] [NOFB] [ 35.566088] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0 [ 35.566090] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6] [ 35.566100] [drm:i915_gem_open] [ 35.566413] [drm:i915_gem_open] [ 35.566432] [drm:i915_gem_open] [ 35.566477] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[3] [ 35.566488] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[3] [ 35.566497] [drm:drm_mode_getconnector] [CONNECTOR:17:?] [ 35.566500] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:eDP-1] [ 35.566503] [drm:intel_dp_detect] [CONNECTOR:17:eDP-1] [ 35.566513] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 35.566518] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:eDP-1] probed modes : [ 35.566521] [drm:drm_mode_debug_printmodeline] Modeline 18:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 35.566524] [drm:drm_mode_debug_printmodeline] Modeline 19:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa [ 35.566527] [drm:drm_mode_getconnector] [CONNECTOR:17:?] [ 35.566562] [drm:drm_mode_getconnector] [CONNECTOR:27:?] [ 35.566564] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1] [ 35.566566] [drm:intel_dp_detect] [CONNECTOR:27:DP-1] [ 35.566571] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1] disconnected [ 35.566574] [drm:drm_mode_getconnector] [CONNECTOR:27:?] [ 35.566575] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1] [ 35.566577] [drm:intel_dp_detect] [CONNECTOR:27:DP-1] [ 35.566581] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1] disconnected [ 35.566600] [drm:drm_mode_getconnector] [CONNECTOR:28:?] [ 35.566602] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:HDMI-A-1] [ 35.566604] [drm:intel_hdmi_detect] [CONNECTOR:28:HDMI-A-1] [ 35.566765] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 35.566768] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 35.566771] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:HDMI-A-1] disconnected [ 35.566775] [drm:drm_mode_getconnector] [CONNECTOR:28:?] [ 35.566777] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:HDMI-A-1] [ 35.566779] [drm:intel_hdmi_detect] [CONNECTOR:28:HDMI-A-1] [ 35.566945] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 35.566949] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 35.566953] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:HDMI-A-1] disconnected [ 35.566985] [drm:drm_mode_getconnector] [CONNECTOR:30:?] [ 35.566988] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-2] [ 35.566990] [drm:intel_hdmi_detect] [CONNECTOR:30:HDMI-A-2] [ 35.567158] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 35.567161] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 35.567164] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-2] disconnected [ 35.567168] [drm:drm_mode_getconnector] [CONNECTOR:30:?] [ 35.567171] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-2] [ 35.567173] [drm:intel_hdmi_detect] [CONNECTOR:30:HDMI-A-2] [ 35.567334] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 35.567337] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 35.567340] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-2] disconnected [ 35.569557] [drm:drm_mode_setcrtc] [CRTC:6] [ 35.569561] [drm:intel_crtc_set_config] [CRTC:6] [NOFB] [ 35.569564] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=1, fb_changed=0 [ 35.569566] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [NOCRTC] [ 35.569568] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch [ 35.569569] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch [ 35.569571] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch [ 35.569574] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 1 [ 35.582724] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 35.582733] [drm:intel_edp_backlight_off] [ 35.598716] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 35.598725] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 35.598890] [drm:intel_edp_panel_off] Turn eDP power off [ 35.783647] [drm:wait_panel_off] Wait for panel power off time [ 35.783652] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 35.838623] [drm:wait_panel_status] Wait complete [ 35.838634] [drm:intel_update_fbc] no output, disabling [ 35.838641] [drm:intel_display_power_put] disabling always-on [ 35.838647] [drm:check_encoder_state] [ENCODER:16:TMDS-16] [ 35.838650] [drm:check_encoder_state] [ENCODER:26:TMDS-26] [ 35.838652] [drm:check_encoder_state] [ENCODER:29:TMDS-29] [ 35.838654] [drm:check_crtc_state] [CRTC:6] [ 35.838657] [drm:check_crtc_state] [CRTC:10] [ 35.838660] [drm:check_crtc_state] [CRTC:14] [ 35.838667] [drm:drm_mode_setcrtc] [CRTC:10] [ 35.838669] [drm:intel_crtc_set_config] [CRTC:10] [NOFB] [ 35.838672] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0 [ 35.838675] [drm:drm_mode_setcrtc] [CRTC:14] [ 35.838676] [drm:intel_crtc_set_config] [CRTC:14] [NOFB] [ 35.838678] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0 [ 36.579397] [drm:intel_display_power_put] disabling display [ 36.579401] [drm:hsw_set_power_well] Requesting to disable the power well [ 36.579425] [drm:intel_runtime_suspend] Suspending device [ 36.579465] [drm:hsw_enable_pc8] Enabling package C8+ [ 36.587353] [drm:intel_runtime_suspend] Device suspended [ 62.004657] usb 1-5: USB disconnect, device number 3 [ 63.527668] usb 1-5: new low-speed USB device number 5 using xhci_hcd [ 63.695061] usb 1-5: New USB device found, idVendor=046d, idProduct=c05a [ 63.695065] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 63.695067] usb 1-5: Product: USB Optical Mouse [ 63.695069] usb 1-5: Manufacturer: Logitech [ 63.695161] usb 1-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 63.697071] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:046D:C05A.0004/input/input10 [ 63.697214] hid-generic 0003:046D:C05A.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-5/input0 [ 63.790002] usb 1-6: USB disconnect, device number 4 [ 65.311026] usb 1-6: new low-speed USB device number 6 using xhci_hcd [ 65.478417] usb 1-6: New USB device found, idVendor=046d, idProduct=c077 [ 65.478421] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 65.478423] usb 1-6: Product: USB Optical Mouse [ 65.478425] usb 1-6: Manufacturer: Logitech [ 65.478516] usb 1-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 65.480202] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:046D:C077.0005/input/input11 [ 65.480353] hid-generic 0003:046D:C077.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6/input0 [ 123.688384] usb 1-5: USB disconnect, device number 5 [ 125.204474] usb 1-5: new low-speed USB device number 7 using xhci_hcd [ 125.371907] usb 1-5: New USB device found, idVendor=046d, idProduct=c05a [ 125.371910] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 125.371912] usb 1-5: Product: USB Optical Mouse [ 125.371914] usb 1-5: Manufacturer: Logitech [ 125.372004] usb 1-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 125.373807] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:046D:C05A.0006/input/input12 [ 125.373951] hid-generic 0003:046D:C05A.0006: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-5/input0 [ 125.463737] usb 1-6: USB disconnect, device number 6 [ 126.984830] usb 1-6: new low-speed USB device number 8 using xhci_hcd [ 127.152264] usb 1-6: New USB device found, idVendor=046d, idProduct=c077 [ 127.152266] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 127.152269] usb 1-6: Product: USB Optical Mouse [ 127.152271] usb 1-6: Manufacturer: Logitech [ 127.152358] usb 1-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 127.154054] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:046D:C077.0007/input/input13 [ 127.154196] hid-generic 0003:046D:C077.0007: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6/input0 [ 155.882253] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0) [ 155.882255] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set [ 155.882257] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=1, fb_changed=0 [ 155.882258] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch [ 155.882259] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6] [ 155.882260] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch [ 155.882261] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch [ 155.882263] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 155.882265] [drm:connected_sink_compute_bpp] [CONNECTOR:17:eDP-1] checking for sink bpp constrains [ 155.882268] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 155.882270] [drm:intel_dp_compute_config] forcing lane count to max (2) on BDW [ 155.882270] [drm:intel_dp_compute_config] using min 06 link bw per VBT [ 155.882276] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 155.882277] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 155.882279] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 155.882280] [drm:intel_dump_pipe_config] [CRTC:6][modeset] config for pipe A [ 155.882281] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 155.882282] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 155.882284] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 155.882285] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 155.882286] [drm:intel_dump_pipe_config] requested mode: [ 155.882289] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 155.882289] [drm:intel_dump_pipe_config] adjusted mode: [ 155.882291] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 155.882293] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 155.882294] [drm:intel_dump_pipe_config] port clock: 270000 [ 155.882295] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 155.882296] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 155.882297] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 155.882298] [drm:intel_dump_pipe_config] ips: 1 [ 155.882299] [drm:intel_dump_pipe_config] double wide: 0 [ 155.892445] [drm:intel_runtime_resume] Resuming device [ 155.894415] [drm:hsw_disable_pc8] Disabling package C8+ [ 155.906470] [drm:intel_runtime_resume] Device resumed [ 155.906472] [drm:intel_display_power_get] enabling always-on [ 155.906496] [drm:ironlake_update_primary_plane] Writing base 00881000 00000000 0 0 7680 [ 155.906506] [drm:intel_edp_panel_on] Turn eDP power on [ 155.906509] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 155.906513] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000 [ 155.906515] [drm:wait_panel_status] Wait complete [ 155.906519] [drm:wait_panel_on] Wait for panel power on [ 155.906522] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003 [ 156.115336] [drm:wait_panel_status] Wait complete [ 156.115340] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 156.115347] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 156.116422] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 156.116880] [drm:intel_dp_start_link_train] clock recovery OK [ 156.117639] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful [ 156.117925] [drm:intel_edp_backlight_on] [ 156.117930] [drm:intel_panel_enable_backlight] pipe A [ 156.117936] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 156.117940] [drm:intel_edp_psr_enable] PSR not supported by this panel [ 156.151325] [drm:intel_update_fbc] disabled per chip default [ 156.151330] [drm:intel_connector_check_state] [CONNECTOR:17:eDP-1] [ 156.151334] [drm:check_encoder_state] [ENCODER:16:TMDS-16] [ 156.151336] [drm:check_encoder_state] [ENCODER:26:TMDS-26] [ 156.151337] [drm:check_encoder_state] [ENCODER:29:TMDS-29] [ 156.151339] [drm:check_crtc_state] [CRTC:6] [ 156.151351] [drm:check_crtc_state] [CRTC:10] [ 156.151352] [drm:check_crtc_state] [CRTC:14] [ 156.151354] [drm:intel_crtc_set_config] [CRTC:10] [NOFB] [ 156.151356] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0 [ 156.151357] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6] [ 156.151358] [drm:intel_crtc_set_config] [CRTC:14] [NOFB] [ 156.151359] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0 [ 156.151360] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6] [ 156.151365] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0) [ 156.151366] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 156.151367] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6] [ 156.151376] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0) [ 156.151377] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 156.151378] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6] [ 156.158767] [drm:intel_crtc_set_config] [CRTC:6] [FB:33] #connectors=1 (x y) (0 0) [ 156.158770] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:6], mode_changed=0, fb_changed=0 [ 156.158772] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6] [ 156.158774] [drm:intel_crtc_set_config] [CRTC:10] [NOFB] [ 156.158776] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:10], mode_changed=0, fb_changed=0 [ 156.158778] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6] [ 156.158779] [drm:intel_crtc_set_config] [CRTC:14] [NOFB] [ 156.158781] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:14], mode_changed=0, fb_changed=0 [ 156.158783] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:eDP-1] to [CRTC:6] [ 157.696934] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 159.124256] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 159.124264] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 185.354123] usb 1-5: USB disconnect, device number 7 [ 186.870279] usb 1-5: new low-speed USB device number 9 using xhci_hcd [ 187.037647] usb 1-5: New USB device found, idVendor=046d, idProduct=c05a [ 187.037651] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 187.037654] usb 1-5: Product: USB Optical Mouse [ 187.037655] usb 1-5: Manufacturer: Logitech [ 187.037747] usb 1-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 187.039546] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:046D:C05A.0008/input/input14 [ 187.039691] hid-generic 0003:046D:C05A.0008: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-5/input0 [ 187.145471] usb 1-6: USB disconnect, device number 8 [ 188.666632] usb 1-6: new low-speed USB device number 10 using xhci_hcd [ 188.833997] usb 1-6: New USB device found, idVendor=046d, idProduct=c077 [ 188.834000] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 188.834003] usb 1-6: Product: USB Optical Mouse [ 188.834004] usb 1-6: Manufacturer: Logitech [ 188.834090] usb 1-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 188.835777] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:046D:C077.0009/input/input15 [ 188.835937] hid-generic 0003:046D:C077.0009: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6/input0