[ 5.810] X.Org X Server 1.16.0 Release Date: 2014-07-16 [ 5.810] X Protocol Version 11, Revision 0 [ 5.810] Build Operating System: Linux 3.15.5-2-ARCH i686 [ 5.810] Current Operating System: Linux ss9 3.14.15-1-lts #1 SMP Thu Jul 31 22:56:37 UTC 2014 i686 [ 5.810] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=0ab3850b-dc71-4556-ace1-b6a50248a8b9 rw quiet rw i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 [ 5.810] Build Date: 31 July 2014 11:55:52AM [ 5.810] [ 5.810] Current version of pixman: 0.32.6 [ 5.810] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 5.810] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 5.810] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 5 09:23:43 2014 [ 5.828] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 5.828] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 5.835] (==) No Layout section. Using the first Screen section. [ 5.835] (==) No screen section available. Using defaults. [ 5.835] (**) |-->Screen "Default Screen Section" (0) [ 5.835] (**) | |-->Monitor "" [ 5.836] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 5.836] (==) Automatically adding devices [ 5.836] (==) Automatically enabling devices [ 5.836] (==) Automatically adding GPU devices [ 5.842] (WW) The directory "/usr/share/fonts/OTF/" does not exist. [ 5.842] Entry deleted from font path. [ 5.843] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/". [ 5.843] Entry deleted from font path. [ 5.843] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/"). [ 5.844] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/". [ 5.844] Entry deleted from font path. [ 5.844] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/"). [ 5.844] (==) FontPath set to: /usr/share/fonts/misc/, /usr/share/fonts/TTF/, /usr/share/fonts/Type1/ [ 5.844] (==) ModulePath set to "/usr/lib/xorg/modules" [ 5.844] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 5.844] (II) Loader magic: 0x82a0700 [ 5.844] (II) Module ABI versions: [ 5.844] X.Org ANSI C Emulation: 0.4 [ 5.844] X.Org Video Driver: 18.0 [ 5.844] X.Org XInput driver : 21.0 [ 5.844] X.Org Server Extension : 8.0 [ 5.845] (EE) systemd-logind: failed to get session: PID 280 does not belong to any known session [ 5.845] (II) xfree86: Adding drm device (/dev/dri/card0) [ 5.847] (--) PCI:*(0:0:2:0) 8086:0166:144d:c0d3 rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00003000/64 [ 5.847] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) [ 5.847] (II) LoadModule: "glx" [ 5.854] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 5.867] (II) Module glx: vendor="X.Org Foundation" [ 5.867] compiled for 1.16.0, module version = 1.0.0 [ 5.867] ABI class: X.Org Server Extension, version 8.0 [ 5.867] (==) AIGLX enabled [ 5.867] (==) Matched intel as autoconfigured driver 0 [ 5.867] (==) Matched intel as autoconfigured driver 1 [ 5.867] (==) Matched modesetting as autoconfigured driver 2 [ 5.867] (==) Matched fbdev as autoconfigured driver 3 [ 5.867] (==) Matched vesa as autoconfigured driver 4 [ 5.867] (==) Assigned the driver to the xf86ConfigLayout [ 5.867] (II) LoadModule: "intel" [ 5.867] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 5.871] (II) Module intel: vendor="X.Org Foundation" [ 5.871] compiled for 1.16.0, module version = 2.99.914 [ 5.871] Module class: X.Org Video Driver [ 5.871] ABI class: X.Org Video Driver, version 18.0 [ 5.871] (II) LoadModule: "modesetting" [ 5.872] (WW) Warning, couldn't open module modesetting [ 5.872] (II) UnloadModule: "modesetting" [ 5.872] (II) Unloading modesetting [ 5.872] (EE) Failed to load module "modesetting" (module does not exist, 0) [ 5.872] (II) LoadModule: "fbdev" [ 5.872] (WW) Warning, couldn't open module fbdev [ 5.872] (II) UnloadModule: "fbdev" [ 5.872] (II) Unloading fbdev [ 5.872] (EE) Failed to load module "fbdev" (module does not exist, 0) [ 5.872] (II) LoadModule: "vesa" [ 5.872] (WW) Warning, couldn't open module vesa [ 5.872] (II) UnloadModule: "vesa" [ 5.872] (II) Unloading vesa [ 5.872] (EE) Failed to load module "vesa" (module does not exist, 0) [ 5.872] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ 5.873] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000 [ 5.873] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100 [ 5.873] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300 [ 5.873] (++) using VT number 7 [ 5.891] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20080730 [ 5.897] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000 [ 5.897] (--) intel(0): CPU: x86, sse2, sse3, ssse3, sse4.1, sse4.2, avx [ 5.897] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 5.897] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 5.897] (==) intel(0): RGB weight 888 [ 5.897] (==) intel(0): Default visual is TrueColor [ 5.897] (II) intel(0): Output eDP1 has no monitor section [ 5.897] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output eDP1 [ 5.897] (II) intel(0): Output VGA1 has no monitor section [ 5.897] (II) intel(0): Output HDMI1 using monitor section HDMI1 [ 5.897] (**) intel(0): Option "PreferredMode" "1920x1200" [ 5.897] (**) intel(0): Option "RightOf" "eDP1" [ 5.897] (**) intel(0): Option "Primary" "true" [ 5.897] (II) intel(0): Output DP1 has no monitor section [ 5.897] (--) intel(0): Using a maximum size of 64x64 for hardware cursors [ 5.897] (II) intel(0): Output VIRTUAL1 has no monitor section [ 5.898] (II) intel(0): EDID for output eDP1 [ 5.898] (II) intel(0): Manufacturer: SEC Model: 3546 Serial#: 0 [ 5.898] (II) intel(0): Year: 2011 Week: 0 [ 5.898] (II) intel(0): EDID Version: 1.4 [ 5.898] (II) intel(0): Digital Display Input [ 5.898] (II) intel(0): 8 bits per channel [ 5.898] (II) intel(0): Digital interface is DisplayPort [ 5.898] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16 [ 5.898] (II) intel(0): Gamma: 2.20 [ 5.898] (II) intel(0): No DPMS capabilities specified [ 5.898] (II) intel(0): Supported color encodings: RGB 4:4:4 [ 5.898] (II) intel(0): First detailed timing is preferred mode [ 5.898] (II) intel(0): Preferred mode is native pixel format and refresh rate [ 5.898] (II) intel(0): redX: 0.590 redY: 0.340 greenX: 0.330 greenY: 0.540 [ 5.898] (II) intel(0): blueX: 0.155 blueY: 0.135 whiteX: 0.313 whiteY: 0.329 [ 5.898] (II) intel(0): Manufacturer's mask: 0 [ 5.898] (II) intel(0): Supported detailed timing: [ 5.898] (II) intel(0): clock: 100.4 MHz Image Size: 293 x 165 mm [ 5.898] (II) intel(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1792 h_border: 0 [ 5.898] (II) intel(0): v_active: 900 v_sync: 902 v_sync_end 907 v_blanking: 932 v_border: 0 [ 5.898] (II) intel(0): Unknown vendor-specific block f [ 5.898] (II) intel(0): SAMSUNG [ 5.898] (II) intel(0): LSN133KL018 [ 5.898] (II) intel(0): EDID (in hex): [ 5.898] (II) intel(0): 00ffffffffffff004ca3463500000000 [ 5.898] (II) intel(0): 00150104a51d10780209e59757548a27 [ 5.898] (II) intel(0): 22505400000001010101010101010101 [ 5.898] (II) intel(0): 010101010101382740c0608420303020 [ 5.898] (II) intel(0): 250025a5100000190000000f00000000 [ 5.898] (II) intel(0): 000000000028800a1e00000000fe0053 [ 5.898] (II) intel(0): 414d53554e470a2020202020000000fe [ 5.898] (II) intel(0): 004c534e3133334b4c3031380a200003 [ 5.898] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 5.898] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 5.898] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 5.898] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 5.898] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 5.898] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 5.898] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 5.898] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 5.898] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 5.898] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 5.898] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 5.898] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 5.898] (II) intel(0): Printing probed modes for output eDP1 [ 5.898] (II) intel(0): Modeline "1600x900"x60.1 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP) [ 5.898] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) [ 5.898] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) [ 5.898] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) [ 5.898] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 5.899] (II) intel(0): EDID for output VGA1 [ 5.950] (II) intel(0): EDID for output HDMI1 [ 5.950] (II) intel(0): Manufacturer: HWP Model: 2956 Serial#: 16843009 [ 5.950] (II) intel(0): Year: 2013 Week: 42 [ 5.950] (II) intel(0): EDID Version: 1.3 [ 5.950] (II) intel(0): Digital Display Input [ 5.950] (II) intel(0): Max Image Size [cm]: horiz.: 52 vert.: 32 [ 5.950] (II) intel(0): Gamma: 2.20 [ 5.950] (II) intel(0): DPMS capabilities: Off [ 5.950] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 5.950] (II) intel(0): First detailed timing is preferred mode [ 5.950] (II) intel(0): redX: 0.653 redY: 0.332 greenX: 0.304 greenY: 0.633 [ 5.950] (II) intel(0): blueX: 0.150 blueY: 0.064 whiteX: 0.313 whiteY: 0.329 [ 5.950] (II) intel(0): Supported established timings: [ 5.950] (II) intel(0): 640x480@60Hz [ 5.950] (II) intel(0): 800x600@60Hz [ 5.950] (II) intel(0): 1024x768@60Hz [ 5.950] (II) intel(0): Manufacturer's mask: 0 [ 5.950] (II) intel(0): Supported standard timings: [ 5.950] (II) intel(0): #0: hsize: 1920 vsize 1080 refresh: 60 vid: 49361 [ 5.950] (II) intel(0): #1: hsize: 1280 vsize 720 refresh: 60 vid: 49281 [ 5.950] (II) intel(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513 [ 5.950] (II) intel(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 5.950] (II) intel(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149 [ 5.950] (II) intel(0): #5: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 [ 5.950] (II) intel(0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179 [ 5.950] (II) intel(0): Supported detailed timing: [ 5.950] (II) intel(0): clock: 154.0 MHz Image Size: 518 x 324 mm [ 5.950] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0 [ 5.951] (II) intel(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0 [ 5.951] (II) intel(0): Ranges: V min: 24 V max: 60 Hz, H min: 24 H max: 80 kHz, PixClock max 175 MHz [ 5.951] (II) intel(0): Monitor name: HP ZR2440w [ 5.951] (II) intel(0): Serial No: CN434206CS [ 5.951] (II) intel(0): Supported detailed timing: [ 5.951] (II) intel(0): clock: 148.5 MHz Image Size: 518 x 324 mm [ 5.951] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 [ 5.951] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 [ 5.951] (II) intel(0): Supported detailed timing: [ 5.951] (II) intel(0): clock: 148.5 MHz Image Size: 518 x 324 mm [ 5.951] (II) intel(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0 [ 5.951] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 [ 5.951] (II) intel(0): Supported detailed timing: [ 5.951] (II) intel(0): clock: 74.2 MHz Image Size: 518 x 324 mm [ 5.951] (II) intel(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0 [ 5.951] (II) intel(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0 [ 5.951] (II) intel(0): Supported detailed timing: [ 5.951] (II) intel(0): clock: 74.2 MHz Image Size: 518 x 324 mm [ 5.951] (II) intel(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0 [ 5.951] (II) intel(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0 [ 5.951] (II) intel(0): Supported detailed timing: [ 5.951] (II) intel(0): clock: 27.0 MHz Image Size: 518 x 324 mm [ 5.951] (II) intel(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0 [ 5.951] (II) intel(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0 [ 5.951] (II) intel(0): Number of EDID sections to follow: 1 [ 5.951] (II) intel(0): EDID (in hex): [ 5.951] (II) intel(0): 00ffffffffffff0022f0562901010101 [ 5.951] (II) intel(0): 2a170103803420782a4ca5a7554da226 [ 5.951] (II) intel(0): 105054210800d1c081c0814081809500 [ 5.951] (II) intel(0): a940b3000101283c80a070b023403020 [ 5.951] (II) intel(0): 360006442100001a000000fd00183c18 [ 5.951] (II) intel(0): 5011000a202020202020000000fc0048 [ 5.951] (II) intel(0): 50205a5232343430770a2020000000ff [ 5.951] (II) intel(0): 00434e34333432303643530a202001db [ 5.951] (II) intel(0): 02031ff14c901f051404130302070612 [ 5.951] (II) intel(0): 0165030c001000230907078301000002 [ 5.951] (II) intel(0): 3a801871382d40582c45000644210000 [ 5.951] (II) intel(0): 1e023a80d072382d40102c4580064421 [ 5.951] (II) intel(0): 00001e011d007251d01e206e28550006 [ 5.951] (II) intel(0): 442100001e011d00bc52d01e20b82855 [ 5.951] (II) intel(0): 4006442100001e8c0ad08a20e02d1010 [ 5.951] (II) intel(0): 3e9600064421000018000000000000c1 [ 5.951] (II) intel(0): Printing probed modes for output HDMI1 [ 5.951] (II) intel(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz UeP) [ 5.951] (II) intel(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e) [ 5.951] (II) intel(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e) [ 5.951] (II) intel(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e) [ 5.951] (II) intel(0): Modeline "1920x1080i"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e) [ 5.951] (II) intel(0): Modeline "1920x1080i"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e) [ 5.951] (II) intel(0): Modeline "1920x1080i"x59.9 74.18 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e) [ 5.951] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 5.951] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e) [ 5.951] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 5.951] (II) intel(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e) [ 5.951] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 5.951] (II) intel(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 5.951] (II) intel(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e) [ 5.951] (II) intel(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 5.951] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 5.951] (II) intel(0): Modeline "1440x480i"x60.0 27.03 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.8 kHz e) [ 5.951] (II) intel(0): Modeline "1440x480i"x59.9 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e) [ 5.951] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 5.951] (II) intel(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 5.951] (II) intel(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 5.951] (II) intel(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 5.951] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 5.951] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 6.010] (II) intel(0): EDID for output DP1 [ 6.010] (II) intel(0): EDID for output VIRTUAL1 [ 6.010] (II) intel(0): Output eDP1 connected [ 6.010] (II) intel(0): Output VGA1 disconnected [ 6.010] (II) intel(0): Output HDMI1 connected [ 6.010] (II) intel(0): Output DP1 disconnected [ 6.010] (II) intel(0): Output VIRTUAL1 disconnected [ 6.010] (II) intel(0): Using user preference for initial modes [ 6.010] (II) intel(0): Output eDP1 using initial mode 1600x900 [ 6.010] (II) intel(0): Output HDMI1 using initial mode 1920x1200 [ 6.010] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 6.010] (==) intel(0): TearFree disabled [ 6.010] (==) intel(0): DPI set to (96, 96) [ 6.010] (II) Loading sub module "dri2" [ 6.010] (II) LoadModule: "dri2" [ 6.010] (II) Module "dri2" already built-in [ 6.010] (II) Loading sub module "present" [ 6.010] (II) LoadModule: "present" [ 6.010] (II) Module "present" already built-in [ 6.010] (==) Depth 24 pixmap format is 32 bpp [ 6.014] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend [ 6.014] (==) intel(0): Backing store enabled [ 6.014] (==) intel(0): Silken mouse enabled [ 6.015] (II) intel(0): HW Cursor enabled [ 6.015] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 6.016] (==) intel(0): DPMS enabled [ 6.016] (II) intel(0): [DRI2] Setup complete [ 6.016] (II) intel(0): [DRI2] DRI driver: i965 [ 6.016] (II) intel(0): [DRI2] VDPAU driver: i965 [ 6.016] (II) intel(0): direct rendering: DRI2 enabled [ 6.016] (II) intel(0): hardware support for Present enabled [ 6.016] (==) intel(0): display hotplug detection enabled [ 6.016] (--) RandR disabled [ 6.062] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 6.062] (II) AIGLX: enabled GLX_ARB_create_context [ 6.062] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 6.062] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 6.062] (II) AIGLX: enabled GLX_INTEL_swap_event [ 6.062] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 6.062] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 6.062] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 6.062] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 6.062] (II) AIGLX: enabled GLX_ARB_create_context_robustness [ 6.062] (II) AIGLX: Loaded and initialized i965 [ 6.062] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 6.070] (II) intel(0): switch to mode 1600x900@60.1 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none [ 6.090] (II) intel(0): switch to mode 1920x1200@60.0 on HDMI1 using pipe 1, position (1600, 0), rotation normal, reflection none [ 6.110] (II) intel(0): Setting screen physical size to 931 x 317 [ 6.184] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 6.184] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 6.184] (II) LoadModule: "evdev" [ 6.184] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 6.186] (II) Module evdev: vendor="X.Org Foundation" [ 6.186] compiled for 1.16.0, module version = 2.9.0 [ 6.186] Module class: X.Org XInput Driver [ 6.186] ABI class: X.Org XInput driver, version 21.0 [ 6.186] (II) Using input driver 'evdev' for 'Power Button' [ 6.186] (**) Power Button: always reports core events [ 6.186] (**) evdev: Power Button: Device: "/dev/input/event2" [ 6.186] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 6.186] (--) evdev: Power Button: Found keys [ 6.186] (II) evdev: Power Button: Configuring as keyboard [ 6.186] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 6.186] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 6.186] (**) Option "xkb_rules" "evdev" [ 6.186] (**) Option "xkb_model" "pc104" [ 6.186] (**) Option "xkb_layout" "us" [ 6.218] (II) config/udev: Adding input device Video Bus (/dev/input/event3) [ 6.218] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 6.218] (II) Using input driver 'evdev' for 'Video Bus' [ 6.218] (**) Video Bus: always reports core events [ 6.218] (**) evdev: Video Bus: Device: "/dev/input/event3" [ 6.218] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 6.218] (--) evdev: Video Bus: Found keys [ 6.218] (II) evdev: Video Bus: Configuring as keyboard [ 6.218] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3" [ 6.218] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 6.218] (**) Option "xkb_rules" "evdev" [ 6.218] (**) Option "xkb_model" "pc104" [ 6.218] (**) Option "xkb_layout" "us" [ 6.219] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 6.219] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 6.219] (II) Using input driver 'evdev' for 'Power Button' [ 6.219] (**) Power Button: always reports core events [ 6.219] (**) evdev: Power Button: Device: "/dev/input/event1" [ 6.219] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 6.219] (--) evdev: Power Button: Found keys [ 6.219] (II) evdev: Power Button: Configuring as keyboard [ 6.219] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1" [ 6.219] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 6.219] (**) Option "xkb_rules" "evdev" [ 6.219] (**) Option "xkb_model" "pc104" [ 6.219] (**) Option "xkb_layout" "us" [ 6.219] (II) config/udev: Adding input device Lid Switch (/dev/input/event0) [ 6.219] (II) No input driver specified, ignoring this device. [ 6.219] (II) This device may have been added with another device file. [ 6.220] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event6) [ 6.220] (II) No input driver specified, ignoring this device. [ 6.220] (II) This device may have been added with another device file. [ 6.220] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event8) [ 6.220] (II) No input driver specified, ignoring this device. [ 6.220] (II) This device may have been added with another device file. [ 6.220] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7) [ 6.220] (II) No input driver specified, ignoring this device. [ 6.220] (II) This device may have been added with another device file. [ 6.221] (II) config/udev: Adding input device CM Storm Side print (/dev/input/event10) [ 6.221] (**) CM Storm Side print: Applying InputClass "evdev keyboard catchall" [ 6.221] (II) Using input driver 'evdev' for 'CM Storm Side print' [ 6.221] (**) CM Storm Side print: always reports core events [ 6.221] (**) evdev: CM Storm Side print: Device: "/dev/input/event10" [ 6.221] (--) evdev: CM Storm Side print: Vendor 0x2516 Product 0x17 [ 6.221] (--) evdev: CM Storm Side print: Found keys [ 6.221] (II) evdev: CM Storm Side print: Configuring as keyboard [ 6.221] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.4/0000:03:00.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:2516:0017.0001/input/input12/event10" [ 6.221] (II) XINPUT: Adding extended input device "CM Storm Side print" (type: KEYBOARD, id 9) [ 6.221] (**) Option "xkb_rules" "evdev" [ 6.221] (**) Option "xkb_model" "pc104" [ 6.221] (**) Option "xkb_layout" "us" [ 6.222] (II) config/udev: Adding input device CM Storm Side print (/dev/input/event11) [ 6.222] (**) CM Storm Side print: Applying InputClass "evdev keyboard catchall" [ 6.222] (II) Using input driver 'evdev' for 'CM Storm Side print' [ 6.222] (**) CM Storm Side print: always reports core events [ 6.222] (**) evdev: CM Storm Side print: Device: "/dev/input/event11" [ 6.222] (--) evdev: CM Storm Side print: Vendor 0x2516 Product 0x17 [ 6.222] (--) evdev: CM Storm Side print: Found keys [ 6.222] (II) evdev: CM Storm Side print: Configuring as keyboard [ 6.222] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.4/0000:03:00.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:2516:0017.0002/input/input13/event11" [ 6.222] (II) XINPUT: Adding extended input device "CM Storm Side print" (type: KEYBOARD, id 10) [ 6.222] (**) Option "xkb_rules" "evdev" [ 6.222] (**) Option "xkb_model" "pc104" [ 6.222] (**) Option "xkb_layout" "us" [ 6.222] (II) config/udev: Adding input device Webcam SC-13HDL11624N (/dev/input/event9) [ 6.222] (**) Webcam SC-13HDL11624N: Applying InputClass "evdev keyboard catchall" [ 6.222] (II) Using input driver 'evdev' for 'Webcam SC-13HDL11624N' [ 6.222] (**) Webcam SC-13HDL11624N: always reports core events [ 6.222] (**) evdev: Webcam SC-13HDL11624N: Device: "/dev/input/event9" [ 6.223] (--) evdev: Webcam SC-13HDL11624N: Vendor 0x2232 Product 0x1024 [ 6.223] (--) evdev: Webcam SC-13HDL11624N: Found keys [ 6.223] (II) evdev: Webcam SC-13HDL11624N: Configuring as keyboard [ 6.223] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input11/event9" [ 6.223] (II) XINPUT: Adding extended input device "Webcam SC-13HDL11624N" (type: KEYBOARD, id 11) [ 6.223] (**) Option "xkb_rules" "evdev" [ 6.223] (**) Option "xkb_model" "pc104" [ 6.223] (**) Option "xkb_layout" "us" [ 6.223] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4) [ 6.223] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 6.223] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 6.223] (**) AT Translated Set 2 keyboard: always reports core events [ 6.223] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4" [ 6.223] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 6.223] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 6.223] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 6.223] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4" [ 6.223] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12) [ 6.223] (**) Option "xkb_rules" "evdev" [ 6.223] (**) Option "xkb_model" "pc104" [ 6.223] (**) Option "xkb_layout" "us" [ 6.224] (II) config/udev: Adding input device PC Speaker (/dev/input/event5) [ 6.224] (II) No input driver specified, ignoring this device. [ 6.224] (II) This device may have been added with another device file. [ 6.227] (II) config/udev: removing device Webcam SC-13HDL11624N [ 6.330] (II) evdev: Webcam SC-13HDL11624N: Close [ 6.330] (II) UnloadModule: "evdev" [ 6.330] (II) config/udev: Adding input device Webcam SC-13HDL11624N (/dev/input/event9) [ 6.330] (**) Webcam SC-13HDL11624N: Applying InputClass "evdev keyboard catchall" [ 6.330] (II) Using input driver 'evdev' for 'Webcam SC-13HDL11624N' [ 6.330] (**) Webcam SC-13HDL11624N: always reports core events [ 6.330] (**) evdev: Webcam SC-13HDL11624N: Device: "/dev/input/event9" [ 6.330] (--) evdev: Webcam SC-13HDL11624N: Vendor 0x2232 Product 0x1024 [ 6.330] (--) evdev: Webcam SC-13HDL11624N: Found keys [ 6.330] (II) evdev: Webcam SC-13HDL11624N: Configuring as keyboard [ 6.330] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input11/event9" [ 6.330] (II) XINPUT: Adding extended input device "Webcam SC-13HDL11624N" (type: KEYBOARD, id 11) [ 6.330] (**) Option "xkb_rules" "evdev" [ 6.330] (**) Option "xkb_model" "pc104" [ 6.330] (**) Option "xkb_layout" "us" [ 6.331] (II) config/udev: removing device CM Storm Side print [ 6.440] (II) evdev: CM Storm Side print: Close [ 6.440] (II) UnloadModule: "evdev" [ 6.440] (II) config/udev: Adding input device CM Storm Side print (/dev/input/event11) [ 6.440] (**) CM Storm Side print: Applying InputClass "evdev keyboard catchall" [ 6.440] (II) Using input driver 'evdev' for 'CM Storm Side print' [ 6.440] (**) CM Storm Side print: always reports core events [ 6.440] (**) evdev: CM Storm Side print: Device: "/dev/input/event11" [ 6.440] (--) evdev: CM Storm Side print: Vendor 0x2516 Product 0x17 [ 6.440] (--) evdev: CM Storm Side print: Found keys [ 6.440] (II) evdev: CM Storm Side print: Configuring as keyboard [ 6.440] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.4/0000:03:00.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:2516:0017.0002/input/input13/event11" [ 6.440] (II) XINPUT: Adding extended input device "CM Storm Side print" (type: KEYBOARD, id 10) [ 6.440] (**) Option "xkb_rules" "evdev" [ 6.440] (**) Option "xkb_model" "pc104" [ 6.440] (**) Option "xkb_layout" "us" [ 6.440] (II) config/udev: removing device CM Storm Side print [ 6.537] (II) evdev: CM Storm Side print: Close [ 6.537] (II) UnloadModule: "evdev" [ 6.537] (II) config/udev: Adding input device CM Storm Side print (/dev/input/event10) [ 6.537] (**) CM Storm Side print: Applying InputClass "evdev keyboard catchall" [ 6.537] (II) Using input driver 'evdev' for 'CM Storm Side print' [ 6.537] (**) CM Storm Side print: always reports core events [ 6.537] (**) evdev: CM Storm Side print: Device: "/dev/input/event10" [ 6.537] (--) evdev: CM Storm Side print: Vendor 0x2516 Product 0x17 [ 6.537] (--) evdev: CM Storm Side print: Found keys [ 6.537] (II) evdev: CM Storm Side print: Configuring as keyboard [ 6.537] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.4/0000:03:00.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:2516:0017.0001/input/input12/event10" [ 6.537] (II) XINPUT: Adding extended input device "CM Storm Side print" (type: KEYBOARD, id 9) [ 6.537] (**) Option "xkb_rules" "evdev" [ 6.537] (**) Option "xkb_model" "pc104" [ 6.537] (**) Option "xkb_layout" "us" [ 6.538] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0) [ 6.538] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates" [ 6.538] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event12) [ 6.538] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall" [ 6.538] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall" [ 6.538] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons" [ 6.538] (II) LoadModule: "synaptics" [ 6.538] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 6.539] (II) Module synaptics: vendor="X.Org Foundation" [ 6.539] compiled for 1.16.0, module version = 1.8.0 [ 6.539] Module class: X.Org XInput Driver [ 6.539] ABI class: X.Org XInput driver, version 21.0 [ 6.539] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad' [ 6.539] (**) ETPS/2 Elantech Touchpad: always reports core events [ 6.539] (**) Option "Device" "/dev/input/event12" [ 6.730] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property [ 6.730] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2964 (res 33) [ 6.730] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1872 (res 32) [ 6.730] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255 [ 6.730] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15 [ 6.730] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple [ 6.730] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe [ 6.730] (**) Option "HorizTwoFingerScroll" "on" [ 6.730] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0" [ 6.730] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found [ 6.730] (**) ETPS/2 Elantech Touchpad: always reports core events [ 6.830] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event12" [ 6.830] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 13) [ 6.830] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5 [ 6.830] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75 [ 6.830] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.057 [ 6.830] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1 [ 6.830] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1 [ 6.830] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000 [ 6.830] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4 [ 6.830] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found [ 71.088] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event13) [ 71.088] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall" [ 71.088] (II) Using input driver 'evdev' for 'USB OPTICAL MOUSE' [ 71.088] (**) USB OPTICAL MOUSE: always reports core events [ 71.088] (**) evdev: USB OPTICAL MOUSE: Device: "/dev/input/event13" [ 71.088] (--) evdev: USB OPTICAL MOUSE: Vendor 0x93a Product 0x2521 [ 71.088] (--) evdev: USB OPTICAL MOUSE: Found 9 mouse buttons [ 71.088] (--) evdev: USB OPTICAL MOUSE: Found scroll wheel(s) [ 71.088] (--) evdev: USB OPTICAL MOUSE: Found relative axes [ 71.088] (--) evdev: USB OPTICAL MOUSE: Found x and y relative axes [ 71.088] (II) evdev: USB OPTICAL MOUSE: Configuring as mouse [ 71.088] (II) evdev: USB OPTICAL MOUSE: Adding scrollwheel support [ 71.088] (**) evdev: USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5 [ 71.088] (**) evdev: USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 71.088] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.4/0000:03:00.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:093A:2521.0003/input/input14/event13" [ 71.088] (II) XINPUT: Adding extended input device "USB OPTICAL MOUSE" (type: MOUSE, id 14) [ 71.089] (II) evdev: USB OPTICAL MOUSE: initialized for relative axes. [ 71.089] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1 [ 71.089] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0 [ 71.089] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000 [ 71.089] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4 [ 71.090] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse1) [ 71.090] (II) No input driver specified, ignoring this device. [ 71.090] (II) This device may have been added with another device file.