[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3907484K/4074708K available (7301K kernel code, 744K rwdata, 3604K rodata, 22660K init, 604K bss, 167224K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS:4352 nr_irqs:1024 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Maximum core-clock to bus-clock ratio: 0x16 [ 0.000000] Resolved frequency ID: 0, frequency: 83200 KHz [ 0.000000] TSC runs at 1830400 KHz [ 0.000000] lapic_timer_frequency = 83200 [ 0.000000] tsc: Detected 1830.400 MHz processor [ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3660.80 BogoMIPS (lpj=1830400) [ 0.000014] pid_max: default: 32768 minimum: 301 [ 0.000029] ACPI: Core revision 20140424 [ 0.021001] ACPI: All ACPI Tables successfully acquired [ 0.021061] Security Framework initialized [ 0.021510] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.023512] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.024429] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.024450] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.024873] CPU: Physical Processor ID: 0 [ 0.024883] CPU: Processor Core ID: 0 [ 0.029673] mce: CPU supports 6 MCE banks [ 0.029685] CPU0: Thermal monitoring handled by SMI [ 0.029696] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 [ 0.029696] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0 [ 0.029696] tlb_flushall_shift: 6 [ 0.029863] Freeing SMP alternatives memory: 32K (ffffffff83186000 - ffffffff8318e000) [ 0.030916] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.040917] smpboot: CPU0: Intel(R) Celeron(R) CPU N2930 @ 1.83GHz (fam: 06, model: 37, stepping: 08) [ 0.040948] TSC deadline timer enabled [ 0.040970] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver. [ 0.040993] ... version: 3 [ 0.040998] ... bit width: 40 [ 0.041002] ... generic registers: 2 [ 0.041007] ... value mask: 000000ffffffffff [ 0.041012] ... max period: 000000ffffffffff [ 0.041017] ... fixed-purpose events: 3 [ 0.041022] ... event mask: 0000000700000003 [ 0.041526] x86: Booting SMP configuration: [ 0.041534] .... node #0, CPUs: #1 [ 0.057360] CPU1: Thermal monitoring handled by SMI [ 0.059634] #2<7>[ 0.075465] CPU2: Thermal monitoring handled by SMI [ 0.093487] #3 [ 0.093487] CPU3: Thermal monitoring handled by SMI [ 0.095637] x86: Booted up 1 node, 4 CPUs [ 0.095649] smpboot: Total of 4 processors activated (14643.20 BogoMIPS) [ 0.096410] devtmpfs: initialized [ 0.097009] PM: Registering ACPI NVS region [mem 0x0006f000-0x0006ffff] (4096 bytes) [ 0.097018] PM: Registering ACPI NVS region [mem 0x78b4d000-0x78c4cfff] (1048576 bytes) [ 0.097054] PM: Registering ACPI NVS region [mem 0x796f2000-0x79ff1fff] (9437184 bytes) [ 0.097516] xor: measuring software checksum speed [ 0.106633] prefetch64-sse: 6372.000 MB/sec [ 0.116645] generic_sse: 5668.000 MB/sec [ 0.116651] xor: using function: prefetch64-sse (6372.000 MB/sec) [ 0.116685] RTC time: 23:35:34, date: 08/06/14 [ 0.116786] NET: Registered protocol family 16 [ 0.117208] cpuidle: using governor ladder [ 0.117217] cpuidle: using governor menu [ 0.117401] ACPI: bus type PCI registered [ 0.117477] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.117487] PCI: not using MMCONFIG [ 0.117492] PCI: Using configuration type 1 for base access [ 0.141763] raid6: sse2x1 550 MB/s [ 0.158745] raid6: sse2x2 699 MB/s [ 0.175791] raid6: sse2x4 1187 MB/s [ 0.175797] raid6: using algorithm sse2x4 (1187 MB/s) [ 0.175803] raid6: using ssse3x2 recovery algorithm [ 0.175905] ACPI: Added _OSI(Module Device) [ 0.175913] ACPI: Added _OSI(Processor Device) [ 0.175918] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.175924] ACPI: Added _OSI(Processor Aggregator Device) [ 0.183452] ACPI: Executed 1 blocks of module-level executable AML code [ 0.197325] ACPI: Dynamic OEM Table Load: [ 0.197346] ACPI: SSDT 0xFFFF88017A189400 0003D7 (v01 PmRef Cpu0Ist 00003000 INTL 20121220) [ 0.198514] ACPI: Dynamic OEM Table Load: [ 0.198531] ACPI: SSDT 0xFFFF88017A189800 0003E5 (v01 PmRef Cpu0Cst 00003001 INTL 20121220) [ 0.207098] ACPI: Dynamic OEM Table Load: [ 0.207114] ACPI: SSDT 0xFFFF88017A18CA00 00015F (v01 PmRef ApIst 00003000 INTL 20121220) [ 0.210796] ACPI: Dynamic OEM Table Load: [ 0.210812] ACPI: SSDT 0xFFFF88017ABAE900 00008D (v01 PmRef ApCst 00003000 INTL 20121220) [ 0.221108] ACPI: Interpreter enabled [ 0.221123] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580) [ 0.221139] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) [ 0.221175] ACPI: (supports S0 S3 S4 S5) [ 0.221182] ACPI: Using IOAPIC for interrupt routing [ 0.221229] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.222321] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources [ 0.222494] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.229026] ACPI: Power Resource [USBC] (on) [ 0.234556] ACPI: Power Resource [PLPE] (on) [ 0.234866] ACPI: Power Resource [PLPE] (on) [ 0.241333] ACPI: Power Resource [CLK0] (on) [ 0.241429] ACPI: Power Resource [CLK1] (on) [ 0.310121] ACPI: Power Resource [NVP3] (on) [ 0.310201] ACPI: Power Resource [NVP2] (on) [ 0.310739] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.310755] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.310919] \_SB_.PCI0:_OSC invalid UUID [ 0.310923] _OSC request data:1 1f 0 [ 0.310932] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.311417] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.311490] PCI host bridge to bus 0000:00 [ 0.311500] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.311508] pci_bus 0000:00: root bus resource [io 0x0000-0x006f] [ 0.311515] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7] [ 0.311523] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.311530] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.311538] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.311546] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff] [ 0.311553] pci_bus 0000:00: root bus resource [mem 0x80000000-0xa38ffffe] [ 0.311570] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000 [ 0.311742] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000 [ 0.311760] pci 0000:00:02.0: reg 0x10: [mem 0xa3000000-0xa33fffff] [ 0.311775] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref] [ 0.311788] pci 0000:00:02.0: reg 0x20: [io 0x3050-0x3057] [ 0.311969] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601 [ 0.311993] pci 0000:00:13.0: reg 0x10: [io 0x3048-0x304f] [ 0.312005] pci 0000:00:13.0: reg 0x14: [io 0x305c-0x305f] [ 0.312023] pci 0000:00:13.0: reg 0x18: [io 0x3040-0x3047] [ 0.312036] pci 0000:00:13.0: reg 0x1c: [io 0x3058-0x305b] [ 0.312047] pci 0000:00:13.0: reg 0x20: [io 0x3020-0x303f] [ 0.312060] pci 0000:00:13.0: reg 0x24: [mem 0xa3814000-0xa38147ff] [ 0.312111] pci 0000:00:13.0: PME# supported from D3hot [ 0.312261] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330 [ 0.312284] pci 0000:00:14.0: reg 0x10: [mem 0xa3800000-0xa380ffff 64bit] [ 0.312347] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.312418] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.312517] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000 [ 0.312546] pci 0000:00:1a.0: reg 0x10: [mem 0xa3700000-0xa37fffff] [ 0.312562] pci 0000:00:1a.0: reg 0x14: [mem 0xa3600000-0xa36fffff] [ 0.312670] pci 0000:00:1a.0: PME# supported from D0 D3hot [ 0.312823] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300 [ 0.312850] pci 0000:00:1b.0: reg 0x10: [mem 0xa3810000-0xa3813fff 64bit] [ 0.312926] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.313076] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400 [ 0.313145] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.313245] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.313337] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400 [ 0.313405] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.313478] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.313565] pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400 [ 0.313633] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.313704] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.313798] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100 [ 0.314008] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500 [ 0.314054] pci 0000:00:1f.3: reg 0x10: [mem 0xa3815000-0xa381501f] [ 0.314129] pci 0000:00:1f.3: reg 0x20: [io 0x3000-0x301f] [ 0.314429] pci 0000:01:00.0: [10de:1140] type 00 class 0x030200 [ 0.314452] pci 0000:01:00.0: reg 0x10: [mem 0xa2000000-0xa2ffffff] [ 0.314472] pci 0000:01:00.0: reg 0x14: [mem 0x90000000-0x9fffffff 64bit pref] [ 0.314491] pci 0000:01:00.0: reg 0x1c: [mem 0xa0000000-0xa1ffffff 64bit pref] [ 0.314505] pci 0000:01:00.0: reg 0x24: [io 0x2000-0x207f] [ 0.314520] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref] [ 0.314625] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.316049] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.316060] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.316066] pci 0000:00:1c.0: bridge window [mem 0xa2000000-0xa2ffffff] [ 0.316074] pci 0000:00:1c.0: bridge window [mem 0x90000000-0xa1ffffff 64bit pref] [ 0.316186] pci 0000:02:00.0: [168c:0036] type 00 class 0x028000 [ 0.316232] pci 0000:02:00.0: reg 0x10: [mem 0xa3500000-0xa357ffff 64bit] [ 0.316319] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref] [ 0.316435] pci 0000:02:00.0: supports D1 D2 [ 0.316440] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.316493] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.318060] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.318072] pci 0000:00:1c.2: bridge window [mem 0xa3500000-0xa35fffff] [ 0.318176] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.318199] pci 0000:03:00.0: reg 0x10: [io 0x1000-0x10ff] [ 0.318230] pci 0000:03:00.0: reg 0x18: [mem 0xa3404000-0xa3404fff 64bit] [ 0.318250] pci 0000:03:00.0: reg 0x20: [mem 0xa3400000-0xa3403fff 64bit] [ 0.318345] pci 0000:03:00.0: supports D1 D2 [ 0.318350] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.318394] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.320059] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.320069] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff] [ 0.320075] pci 0000:00:1c.3: bridge window [mem 0xa3400000-0xa34fffff] [ 0.321971] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.322111] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.322238] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.322365] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.322492] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.322624] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.322752] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.322878] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.325207] ACPI: Enabled 11 GPEs in block 00 to 3F [ 0.325301] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 [ 0.325552] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.325572] vgaarb: loaded [ 0.325576] vgaarb: bridge control possible 0000:00:02.0 [ 0.325767] SCSI subsystem initialized [ 0.325880] libata version 3.00 loaded. [ 0.325980] ACPI: bus type USB registered [ 0.326046] usbcore: registered new interface driver usbfs [ 0.326081] usbcore: registered new interface driver hub [ 0.326146] usbcore: registered new device driver usb [ 0.326232] pps_core: LinuxPPS API ver. 1 registered [ 0.326239] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.326260] PTP clock support registered [ 0.326401] PCI: Using ACPI for IRQ routing [ 0.327846] PCI: pci_cache_line_size set to 64 bytes [ 0.327905] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff] [ 0.327909] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff] [ 0.327913] e820: reserve RAM buffer [mem 0x7823e000-0x7bffffff] [ 0.327916] e820: reserve RAM buffer [mem 0x796f2000-0x7bffffff] [ 0.327920] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff] [ 0.328157] NetLabel: Initializing [ 0.328163] NetLabel: domain hash size = 128 [ 0.328168] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.328191] NetLabel: unlabeled traffic allowed by default [ 0.328399] Switched to clocksource refined-jiffies [ 0.328546] pnp: PnP ACPI init [ 0.328569] ACPI: bus type PNP registered [ 0.328664] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.329803] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.329816] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.329824] system 00:01: [io 0x0500-0x05fe] has been reserved [ 0.329832] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.329841] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.329852] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.329979] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.330062] pnp 00:03: Plug and Play ACPI device, IDs ETD0623 PNP0f13 ETD0000 (active) [ 0.330593] system 00:04: [mem 0xe0000000-0xefffffff] could not be reserved [ 0.330604] system 00:04: [mem 0xfed01000-0xfed01fff] has been reserved [ 0.330612] system 00:04: [mem 0xfed03000-0xfed03fff] has been reserved [ 0.330621] system 00:04: [mem 0xfed04000-0xfed04fff] has been reserved [ 0.330629] system 00:04: [mem 0xfed0c000-0xfed0ffff] has been reserved [ 0.330637] system 00:04: [mem 0xfed08000-0xfed08fff] has been reserved [ 0.330645] system 00:04: [mem 0xfed1c000-0xfed1cfff] has been reserved [ 0.330653] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.330662] system 00:04: [mem 0xfef00000-0xfeffffff] has been reserved [ 0.330671] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.332681] pnp: PnP ACPI: found 5 devices [ 0.332688] ACPI: bus type PNP unregistered [ 0.341751] Switched to clocksource acpi_pm [ 0.341847] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window [ 0.341859] pci 0000:02:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window [ 0.341918] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x80000) [ 0.341927] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.341937] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.341947] pci 0000:00:1c.0: bridge window [mem 0xa2000000-0xa2ffffff] [ 0.341957] pci 0000:00:1c.0: bridge window [mem 0x90000000-0xa1ffffff 64bit pref] [ 0.341972] pci 0000:02:00.0: BAR 6: assigned [mem 0xa3580000-0xa358ffff pref] [ 0.341981] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.341991] pci 0000:00:1c.2: bridge window [mem 0xa3500000-0xa35fffff] [ 0.342003] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.342011] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff] [ 0.342020] pci 0000:00:1c.3: bridge window [mem 0xa3400000-0xa34fffff] [ 0.342034] pci_bus 0000:00: resource 4 [io 0x0000-0x006f] [ 0.342039] pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7] [ 0.342043] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff] [ 0.342048] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff] [ 0.342052] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff] [ 0.342057] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff] [ 0.342062] pci_bus 0000:00: resource 10 [mem 0x80000000-0xa38ffffe] [ 0.342067] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.342071] pci_bus 0000:01: resource 1 [mem 0xa2000000-0xa2ffffff] [ 0.342076] pci_bus 0000:01: resource 2 [mem 0x90000000-0xa1ffffff 64bit pref] [ 0.342081] pci_bus 0000:02: resource 1 [mem 0xa3500000-0xa35fffff] [ 0.342086] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] [ 0.342090] pci_bus 0000:03: resource 1 [mem 0xa3400000-0xa34fffff] [ 0.342174] NET: Registered protocol family 2 [ 0.342573] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.342739] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.342958] TCP: Hash tables configured (established 32768 bind 32768) [ 0.343020] TCP: reno registered [ 0.343039] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.343087] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.343225] NET: Registered protocol family 1 [ 0.343390] RPC: Registered named UNIX socket transport module. [ 0.343398] RPC: Registered udp transport module. [ 0.343403] RPC: Registered tcp transport module. [ 0.343408] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.343433] pci 0000:00:02.0: Boot video device [ 0.343815] PCI: CLS 64 bytes, default 64 [ 1.086822] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.086837] software IO TLB [mem 0x7423e000-0x7823e000] (64MB) mapped at [ffff88007423e000-ffff88007823dfff] [ 1.088643] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 1.088703] audit: initializing netlink subsys (disabled) [ 1.088724] audit: type=2000 audit(1407368134.051:1): initialized [ 1.089110] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.093102] VFS: Disk quotas dquot_6.5.2 [ 1.093188] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.094775] NFS: Registering the id_resolver key type [ 1.094798] Key type id_resolver registered [ 1.094803] Key type id_legacy registered [ 1.094815] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.095140] fuse init (API version 7.23) [ 1.095350] msgmni has been set to 7631 [ 1.095947] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.095959] io scheduler noop registered [ 1.095967] io scheduler deadline registered [ 1.096040] io scheduler cfq registered (default) [ 1.096745] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.096872] efifb: probing for efifb [ 1.096905] efifb: framebuffer at 0x80000000, mapped to 0xffffc90004800000, using 4128k, total 4128k [ 1.096913] efifb: mode is 1366x768x32, linelength=5504, pages=1040 [ 1.096919] efifb: scrolling: redraw [ 1.096925] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.106075] Console: switching to colour frame buffer device 170x48 [ 1.114427] fb0: EFI VGA frame buffer device [ 1.116941] Monitor-Mwait will be used to enter C-1 state [ 1.116952] Monitor-Mwait will be used to enter C-2 state [ 1.116978] ACPI: acpi_idle registered with cpuidle [ 1.120553] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.120635] ACPI: Thermal Zone [TZ01] (40 C) [ 1.120824] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.385002] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.386696] hpet: number irqs doesn't agree with number of timers [ 1.386910] Non-volatile memory driver v1.3 [ 1.386976] Linux agpgart interface v0.103 [ 1.390112] brd: module loaded [ 1.390421] Loading iSCSI transport class v2.0-870. [ 1.390904] iscsi: registered transport (tcp) [ 1.391185] Adaptec aacraid driver 1.2-0[30300]-ms [ 1.391296] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 1.391561] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.08-k. [ 1.391789] iscsi: registered transport (qla4xxx) [ 1.391884] QLogic iSCSI HBA Driver [ 1.392022] DC390: clustering now enabled by default. If you get problems load [ 1.392117] with "disable_clustering=1" and report to maintainers [ 1.394792] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 1.397475] RocketRAID 3xxx/4xxx Controller driver v1.8 [ 1.400098] stex: Promise SuperTrak EX Driver version: 4.6.0000.4 [ 1.402780] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 1.405401] osst :I: Tape driver with OnStream support version 0.99.4 [ 1.405401] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 1.410752] SCSI Media Changer driver v0.25 [ 1.413373] ahci 0000:00:13.0: version 3.0 [ 1.413552] ahci 0000:00:13.0: controller can't do DEVSLP, turning off [ 1.416260] ahci 0000:00:13.0: irq 103 for MSI/MSI-X [ 1.426724] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.429326] ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso [ 1.432595] scsi0 : ahci [ 1.435439] scsi1 : ahci [ 1.438087] ata1: SATA max UDMA/133 abar m2048@0xa3814000 port 0xa3814100 irq 103 [ 1.440737] ata2: SATA max UDMA/133 abar m2048@0xa3814000 port 0xa3814180 irq 103 [ 1.445263] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.20 (March 14, 2014) [ 1.448092] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.19-0 (2014/02/10) [ 1.451104] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.453885] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.456723] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 1.459496] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.462324] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 1.465082] e1000e: Copyright(c) 1999 - 2014 Intel Corporation. [ 1.467869] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k [ 1.470625] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.473453] usbcore: registered new interface driver catc [ 1.476252] usbcore: registered new interface driver kaweth [ 1.478983] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.481774] usbcore: registered new interface driver pegasus [ 1.484524] usbcore: registered new interface driver rtl8150 [ 1.487244] usbcore: registered new interface driver asix [ 1.489894] usbcore: registered new interface driver ax88179_178a [ 1.492495] usbcore: registered new interface driver cdc_ether [ 1.495097] usbcore: registered new interface driver dm9601 [ 1.497651] usbcore: registered new interface driver gl620a [ 1.500189] usbcore: registered new interface driver net1080 [ 1.502665] usbcore: registered new interface driver plusb [ 1.505124] usbcore: registered new interface driver rndis_host [ 1.507538] usbcore: registered new interface driver cdc_subset [ 1.509900] usbcore: registered new interface driver zaurus [ 1.512161] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 1.514470] usbcore: registered new interface driver cdc_ncm [ 1.516925] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.519128] ehci-pci: EHCI PCI platform driver [ 1.521317] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.523490] ohci-pci: OHCI PCI platform driver [ 1.525664] uhci_hcd: USB Universal Host Controller Interface driver [ 1.528064] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.530301] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.532867] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.532897] xhci_hcd 0000:00:14.0: irq 104 for MSI/MSI-X [ 1.532998] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.535165] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.537318] usb usb1: Product: xHCI Host Controller [ 1.539439] usb usb1: Manufacturer: Linux 3.16.0_kcloud_4b1c28_20140806+ xhci_hcd [ 1.541593] usb usb1: SerialNumber: 0000:00:14.0 [ 1.544009] hub 1-0:1.0: USB hub found [ 1.546172] hub 1-0:1.0: 6 ports detected [ 1.548707] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.550972] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.553169] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.555273] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.557308] usb usb2: Product: xHCI Host Controller [ 1.559332] usb usb2: Manufacturer: Linux 3.16.0_kcloud_4b1c28_20140806+ xhci_hcd [ 1.561384] usb usb2: SerialNumber: 0000:00:14.0 [ 1.563619] hub 2-0:1.0: USB hub found [ 1.565638] hub 2-0:1.0: 1 port detected [ 1.567903] usbcore: registered new interface driver usb-storage [ 1.569951] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.590072] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.592122] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.594383] mousedev: PS/2 mouse device common for all mice [ 1.596639] rtc_cmos 00:00: RTC can wake from S4 [ 1.598978] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 1.601082] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram [ 1.603114] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.605340] i2c /dev entries driver [ 1.607581] hidraw: raw HID events driver (C) Jiri Kosina [ 1.610247] usbcore: registered new interface driver usbhid [ 1.612587] usbhid: USB HID core driver [ 1.615021] TCP: cubic registered [ 1.617352] Initializing XFRM netlink socket [ 1.619699] NET: Registered protocol family 17 [ 1.622140] Key type dns_resolver registered [ 1.625501] registered taskstats version 1 [ 1.628910] Btrfs loaded [ 1.632000] Magic number: 10:931:604 [ 1.634542] PM: Hibernation image not present or could not be loaded. [ 1.634591] Warning: unable to open an initial console. [ 1.748957] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.751360] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.756173] ata2.00: ATAPI: PLDS DVD-RW DA8A5SH, RL61, max UDMA/100 [ 1.763436] ata2.00: configured for UDMA/100 [ 1.780223] ata1.00: ATA-8: ST500LT012-1DG142, 0002LVM1, max UDMA/133 [ 1.782565] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.824143] ata1.00: configured for UDMA/133 [ 1.826880] scsi 0:0:0:0: Direct-Access ATA ST500LT012-1DG14 LVM1 PQ: 0 ANSI: 5 [ 1.830438] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.830551] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.830554] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.830690] sd 0:0:0:0: [sda] Write Protect is off [ 1.830694] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.830754] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.846352] scsi 1:0:0:0: CD-ROM PLDS DVD-RW DA8A5SH RL61 PQ: 0 ANSI: 5 [ 1.880549] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.881613] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 [ 1.883306] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.887924] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.890625] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.890793] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.901167] usb 1-2: new high-speed USB device number 2 using xhci_hcd [ 1.904864] Freeing unused kernel memory: 22660K (ffffffff81b65000 - ffffffff83186000) [ 1.991677] dracut: dracut-018-35.git20120510.fc17 [ 2.073263] udevd[1243]: starting version 182 [ 2.085565] usb 1-2: New USB device found, idVendor=0b95, idProduct=772b [ 2.088103] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.090672] usb 1-2: Product: AX88772B [ 2.093242] usb 1-2: Manufacturer: ASIX Elec. Corp. [ 2.095782] usb 1-2: SerialNumber: 00001B [ 2.098325] tsc: Refined TSC clocksource calibration: 1833.333 MHz [ 2.112910] [drm] Initialized drm 1.1.0 20060810 [ 2.117176] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3 [ 2.120484] ACPI: Lid Switch [LID0] [ 2.123148] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4 [ 2.125856] ACPI: Power Button [PWRB] [ 2.128602] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 2.131379] ACPI: Power Button [PWRF] [ 2.139603] [drm:i915_dump_device_info] i915 device info: gen=7, pciid=0x0f31 rev=0x0e flags=is_mobile,need_gfx_hws,is_valleyview,has_hotplug, [ 2.139603] [drm:intel_detect_pch] No PCH found. [ 2.139713] [drm] Memory usable by graphics device = 2048M [ 2.139716] [drm:i915_gem_gtt_init] GMADR size = 256M [ 2.139717] [drm:i915_gem_gtt_init] GTT stolen size = 64M [ 2.139719] [drm:i915_gem_gtt_init] ppgtt mode: 1 [ 2.139720] [drm] Replacing VGA console driver [ 2.152695] checking generic (80000000 408000) vs hw (80000000 10000000) [ 2.152700] fb: switching to inteldrmfb from EFI VGA [ 2.155702] Console: switching to colour dummy device 80x25 [ 2.157798] [drm:intel_opregion_setup] graphic opregion physical addr: 0x78bfd018 [ 2.157819] [drm:intel_opregion_setup] Public ACPI methods supported [ 2.157825] [drm:intel_opregion_setup] ASLE supported [ 2.157982] i915 0000:00:02.0: irq 105 for MSI/MSI-X [ 2.158003] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.158014] [drm] Driver supports precise vblank timestamp query. [ 2.158021] [drm:init_vbt_defaults] Set default to SSC at 100000 kHz [ 2.158026] [drm:validate_vbt] Using VBT from OpRegion: $VBT VALLEYVIEW [ 2.158031] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 2.158035] [drm:parse_general_definitions] crt_ddc_bus_pin: 2 [ 2.158038] [drm:parse_lfp_panel_data] DRRS supported mode is static [ 2.158043] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [ 2.158049] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 2.158053] [drm:parse_lfp_panel_data] VBT initial LVDS value 0 [ 2.158058] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255 [ 2.158062] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT [ 2.158066] [drm:parse_driver_features] DRRS State Enabled:1 [ 2.158140] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 2.158152] [drm:i915_gem_init_stolen] found 67108864 bytes of stolen memory at 7b000000 [ 2.163317] [drm:intel_display_power_get] enabling always-on [ 2.163322] [drm:intel_display_power_get] enabling display [ 2.169302] [drm:intel_display_power_get] enabling dpio-tx-b-01 [ 2.175273] [drm:intel_display_power_get] enabling dpio-tx-b-23 [ 2.181277] [drm:intel_display_power_get] enabling dpio-tx-c-01 [ 2.187283] [drm:intel_display_power_get] enabling dpio-tx-c-23 [ 2.193286] [drm:intel_display_power_get] enabling dpio-common [ 2.235368] [drm:intel_modeset_init] 2 display pipes available. [ 2.235397] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.235815] [drm:intel_crt_reset] pch crt adpa set to 0xf40000 [ 2.235944] [drm:intel_dp_init_connector] Adding DP connector on port B [ 2.236053] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1 [ 2.236447] [drm:intel_dp_init_connector] Adding eDP connector on port C [ 2.236558] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 [ 2.236563] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 2.236567] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600 [ 2.236571] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200 [ 2.236574] [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-eDP-1 [ 2.254513] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 2.254523] [drm:_edp_panel_vdd_on] PP_STATUS: 0xc0000008 PP_CONTROL: 0xabcd000d [ 2.254904] [drm:intel_dp_get_dpcd] DPCD: 11 0a 81 41 00 00 01 80 02 00 00 00 0f 07 00 [ 2.255126] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06 [ 2.294743] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 2.294748] [drm:intel_dp_drrs_init] VBT doesn't support DRRS [ 2.294827] [drm:intel_panel_setup_backlight] backlight initialized, enabled, brightness 3906/3906, sysfs interface registered [ 2.294837] [drm:intel_dsi_init] [ 2.296367] [drm:intel_modeset_readout_hw_state] [CRTC:8] hw state readout: enabled [ 2.296372] [drm:intel_modeset_readout_hw_state] [CRTC:13] hw state readout: disabled [ 2.296378] [drm:intel_modeset_readout_hw_state] [ENCODER:17:DAC-17] hw state readout: disabled, pipe A [ 2.296382] [drm:intel_modeset_readout_hw_state] [ENCODER:18:TMDS-18] hw state readout: disabled, pipe A [ 2.296387] [drm:intel_modeset_readout_hw_state] [ENCODER:23:TMDS-23] hw state readout: disabled, pipe A [ 2.296392] [drm:intel_modeset_readout_hw_state] [ENCODER:25:TMDS-25] hw state readout: disabled, pipe A [ 2.296399] [drm:intel_modeset_readout_hw_state] [ENCODER:27:TMDS-27] hw state readout: enabled, pipe A [ 2.296403] [drm:intel_modeset_readout_hw_state] [CONNECTOR:28:eDP-1] hw state readout: enabled [ 2.296408] [drm:intel_modeset_readout_hw_state] [CONNECTOR:16:VGA-1] hw state readout: disabled [ 2.296412] [drm:intel_modeset_readout_hw_state] [CONNECTOR:19:HDMI-A-1] hw state readout: disabled [ 2.296417] [drm:intel_modeset_readout_hw_state] [CONNECTOR:24:DP-1] hw state readout: disabled [ 2.296421] [drm:intel_modeset_readout_hw_state] [CONNECTOR:26:HDMI-A-2] hw state readout: disabled [ 2.296427] [drm:intel_dump_pipe_config] [CRTC:8][setup_hw_state] config for pipe A [ 2.296430] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 2.296434] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 0 [ 2.296438] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 2.296443] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4963259, gmch_n: 8388608, link_m: 137868, link_n: 524288, tu: 64 [ 2.296446] [drm:intel_dump_pipe_config] requested mode: [ 2.296452] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 1366 0 0 0 768 0 0 0 0x0 0x0 [ 2.296454] [drm:intel_dump_pipe_config] adjusted mode: [ 2.296459] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa [ 2.296465] [drm:intel_dump_crtc_timings] crtc timings: 70999 1366 1404 1426 1482 768 771 777 798, type: 0x0 flags: 0xa [ 2.296468] [drm:intel_dump_pipe_config] port clock: 270000 [ 2.296471] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 2.296475] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 2.296479] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 2.296482] [drm:intel_dump_pipe_config] ips: 0 [ 2.296485] [drm:intel_dump_pipe_config] double wide: 0 [ 2.296490] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B [ 2.296494] [drm:i915_get_vblank_timestamp] crtc 1 is disabled [ 2.296500] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B [ 2.296505] [drm:intel_dump_pipe_config] [CRTC:13][setup_hw_state] config for pipe B [ 2.296508] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 2.296511] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 2.296515] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 2.296519] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 2.296522] [drm:intel_dump_pipe_config] requested mode: [ 2.296527] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.296530] [drm:intel_dump_pipe_config] adjusted mode: [ 2.296535] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.296540] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 2.296543] [drm:intel_dump_pipe_config] port clock: 0 [ 2.296546] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 2.296550] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 2.296553] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 2.296556] [drm:intel_dump_pipe_config] ips: 0 [ 2.296559] [drm:intel_dump_pipe_config] double wide: 0 [ 2.296564] [drm:intel_connector_check_state] [CONNECTOR:28:eDP-1] [ 2.296570] [drm:check_encoder_state] [ENCODER:17:DAC-17] [ 2.296574] [drm:check_encoder_state] [ENCODER:18:TMDS-18] [ 2.296578] [drm:check_encoder_state] [ENCODER:23:TMDS-23] [ 2.296582] [drm:check_encoder_state] [ENCODER:25:TMDS-25] [ 2.296586] [drm:check_encoder_state] [ENCODER:27:TMDS-27] [ 2.296590] [drm:check_crtc_state] [CRTC:8] [ 2.298387] [drm:check_crtc_state] [CRTC:13] [ 2.298400] [drm:i9xx_get_plane_config] pipe/plane 0/0 with fb: size=1366x768@32, offset=0, pitch 5504, size 0x408000 [ 2.298405] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=408000 [ 2.298415] [drm:i915_pages_create_for_stolen] offset=0x0, size=4227072 [ 2.298423] [drm:intel_alloc_plane_obj] plane fb obj ffff880175ed6000 [ 2.298429] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 408000 [ 2.298433] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [408000, 7ffff000] [ 2.302786] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7fdf0 [ 2.302797] [drm:i915_gem_context_init] HW context support initialized [ 2.302839] [drm:init_status_page] render ring hws offset: 0x0040b000 [ 2.302843] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000 [ 2.302849] [drm:i915_pages_create_for_stolen] offset=0x408000, size=131072 [ 2.304420] [drm:init_pipe_control] render ring pipe control offset: 0x0042e000 [ 2.304437] [drm:init_status_page] bsd ring hws offset: 0x0042f000 [ 2.304441] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000 [ 2.304445] [drm:i915_pages_create_for_stolen] offset=0x428000, size=131072 [ 2.304491] [drm:init_status_page] blitter ring hws offset: 0x00452000 [ 2.304495] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000 [ 2.304499] [drm:i915_pages_create_for_stolen] offset=0x448000, size=131072 [ 2.304573] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=3efa000, gtt_offset=ffffffff, size=6000 [ 2.304579] [drm:i915_pages_create_for_stolen] offset=0x3efa000, size=24576 [ 2.306552] [drm:valleyview_init_gt_powersave] max GPU freq: -1 MHz (224) [ 2.308560] [drm:valleyview_init_gt_powersave] RPe GPU freq: -1 MHz (214) [ 2.308573] [drm:valleyview_init_gt_powersave] RP1(Guar Freq) GPU freq: -1 MHz (198) [ 2.308581] [drm:valleyview_init_gt_powersave] min GPU freq: -1 MHz (191) [ 2.312568] [drm:vlv_update_cdclk] Current CD clock rate: 333333 kHz [ 2.314549] [drm:valleyview_init_clock_gating] DDR speed: 1333 MHz<7>[ 2.314577] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:eDP-1] [ 2.338568] [drm:intel_dp_detect] [CONNECTOR:28:eDP-1] [ 2.338927] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 2.339143] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 2.384172] input: PS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input2 [ 2.386511] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 2.404532] asix 1-2:1.0 eth0: register 'asix' at usb-0000:00:14.0-2, ASIX AX88772B USB 2.0 Ethernet, 00:24:8c:02:86:27 [ 2.406499] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:eDP-1] probed modes : [ 2.406507] [drm:drm_mode_debug_printmodeline] Modeline 29:"1366x768" 60 71000 1366 1404 1426 1482 768 771 777 798 0x48 0xa [ 2.406512] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:16:VGA-1] [ 2.406516] [drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1 [ 2.412499] [drm:valleyview_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40000 [ 2.418525] [drm:valleyview_crt_detect_hotplug] valleyview hotplug adpa=0xf40000, result 0 [ 2.418529] [drm:intel_crt_detect] CRT not detected via hotplug [ 2.418774] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 2.418779] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 2.418783] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 2.418786] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 2.419066] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 2.419070] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 2.419073] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 2.423519] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:16:VGA-1] disconnected [ 2.423524] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-1] [ 2.423528] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-1] [ 2.447738] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 2.447742] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 2.471518] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-1] disconnected [ 2.471523] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:DP-1] [ 2.495537] [drm:intel_dp_detect] [CONNECTOR:24:DP-1] [ 2.519557] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:DP-1] disconnected [ 2.519562] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-2] [ 2.519565] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2] [ 2.557975] usb 1-4: new high-speed USB device number 3 using xhci_hcd [ 2.594605] [drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 [ 2.594889] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 2.618636] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-2] disconnected [ 2.618640] [drm:drm_setup_crtcs] [ 2.618645] [drm:drm_enable_connectors] connector 28 enabled? yes [ 2.618648] [drm:drm_enable_connectors] connector 16 enabled? no [ 2.618651] [drm:drm_enable_connectors] connector 19 enabled? no [ 2.618655] [drm:drm_enable_connectors] connector 24 enabled? no [ 2.618658] [drm:drm_enable_connectors] connector 26 enabled? no [ 2.618662] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 2.618666] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 [ 2.618670] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:8]: 1366x768 [ 2.618673] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping [ 2.618677] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 2.618680] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 2.618683] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 2.618686] [drm:drm_setup_crtcs] desired mode 1366x768 set on crtc 8 [ 2.618692] [drm:intelfb_create] no BIOS fb, allocating a new one [ 2.618696] [drm:i915_gem_object_create_stolen] creating stolen object: size=408000 [ 2.618707] [drm:i915_pages_create_for_stolen] offset=0x468000, size=4227072 [ 2.620404] [drm:intelfb_create] allocated 1366x768 fb: 0x00475000, bo ffff880175f92000 [ 2.621051] fbcon: inteldrmfb (fb0) is primary device [ 2.621091] [drm:intel_crtc_set_config] [CRTC:8] [FB:35] #connectors=1 (x y) (0 0) [ 2.621095] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set [ 2.621099] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.621104] [drm:drm_mode_debug_printmodeline] Modeline 34:"1366x768" 60 71000 1366 1404 1426 1482 768 771 777 798 0x48 0xa [ 2.621105] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=1, fb_changed=1 [ 2.621108] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8] [ 2.621113] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 2.621116] [drm:connected_sink_compute_bpp] [CONNECTOR:28:eDP-1] checking for sink bpp constrains [ 2.621118] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18 [ 2.621123] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 0a pixel clock 71000KHz [ 2.621125] [drm:intel_dp_compute_config] using min 1 lanes per VBT [ 2.621126] [drm:intel_dp_compute_config] using min 06 link bw per VBT [ 2.621129] [drm:intel_dp_compute_config] DP link bw 06 lane count 1 clock 162000 bpp 18 [ 2.621130] [drm:intel_dp_compute_config] DP link bw required 127800 available 129600 [ 2.621134] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1 [ 2.621136] [drm:intel_dump_pipe_config] [CRTC:8][modeset] config for pipe A [ 2.621137] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 2.621139] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 2.621141] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 2.621144] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 2068024, gmch_n: 2097152, link_m: 114890, link_n: 262144, tu: 64 [ 2.621145] [drm:intel_dump_pipe_config] requested mode: [ 2.621149] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 71000 1366 1404 1426 1482 768 771 777 798 0x48 0xa [ 2.621150] [drm:intel_dump_pipe_config] adjusted mode: [ 2.621154] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 71000 1366 1404 1426 1482 768 771 777 798 0x48 0xa [ 2.621157] [drm:intel_dump_crtc_timings] crtc timings: 71000 1366 1404 1426 1482 768 771 777 798, type: 0x48 flags: 0xa [ 2.621159] [drm:intel_dump_pipe_config] port clock: 162000 [ 2.621160] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 2.621162] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 2.621164] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 2.621165] [drm:intel_dump_pipe_config] ips: 0 [ 2.621167] [drm:intel_dump_pipe_config] double wide: 0 [ 2.622798] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 2.622817] [drm:intel_edp_backlight_off] [ 2.728197] usb 1-4: New USB device found, idVendor=05e3, idProduct=0608 [ 2.728200] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.728203] usb 1-4: Product: USB2.0 Hub [ 2.729424] hub 1-4:1.0: USB hub found [ 2.729889] hub 1-4:1.0: 4 ports detected [ 2.730402] usb: failed to peer 1-4-port3 and usb2-port1 by location (1-4-port3:none) (usb2-port1:usb1-port1) [ 2.730405] usb 1-4-port3: failed to peer to usb2-port1 (-16) [ 2.730406] usb: port power management may be unreliable [ 2.730459] usb: failed to peer 1-4-port4 and usb2-port1 by location (1-4-port4:none) (usb2-port1:usb1-port1) [ 2.730462] usb 1-4-port4: failed to peer to usb2-port1 (-16) [ 2.823943] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 2.824627] [drm:intel_edp_panel_off] Turn eDP power off [ 2.824631] [drm:wait_panel_off] Wait for panel power off time [ 2.824635] [drm:wait_panel_status] mask b0000000 value 00000000 status c0000008 control abcd0000 [ 2.856955] [drm:wait_panel_status] Wait complete [ 2.913026] [drm:intel_dp_link_down] [ 2.964005] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 2.964008] [drm:valleyview_update_wm] Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0 [ 3.001193] [drm:vlv_update_cdclk] Current CD clock rate: 266667 kHz [ 3.001194] usb 1-4.1: new high-speed USB device number 4 using xhci_hcd [ 3.040118] [drm:intel_display_power_put] disabling always-on [ 3.062141] [drm:i9xx_update_primary_plane] Writing base 00475000 00000000 0 0 5504 [ 3.078025] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 [ 3.078028] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 3.078030] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600 [ 3.078032] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200 [ 3.078037] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06 [ 3.101946] Switched to clocksource tsc [ 3.102007] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 3.102009] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 3.104174] usb 1-4.1: New USB device found, idVendor=0bda, idProduct=579a [ 3.104177] usb 1-4.1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 3.104180] usb 1-4.1: Product: Lenovo EasyCamera [ 3.104182] usb 1-4.1: Manufacturer: J58E4O6G7 [ 3.104185] usb 1-4.1: SerialNumber: 200901010001 [ 3.107772] Linux video capture interface: v2.00 [ 3.109417] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (0bda:579a) [ 3.110677] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1:1.0/input/input6 [ 3.110814] usbcore: registered new interface driver uvcvideo [ 3.110815] USB Video Class driver (1.1.1) [ 3.169280] usb 1-4.2: new high-speed USB device number 5 using xhci_hcd [ 3.243025] usb 1-4.2: New USB device found, idVendor=0bda, idProduct=0129 [ 3.243028] usb 1-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.243031] usb 1-4.2: Product: USB2.0-CRW [ 3.243033] usb 1-4.2: Manufacturer: Generic [ 3.243035] usb 1-4.2: SerialNumber: 20100201396000000 [ 3.306531] usb 1-4.3: new full-speed USB device number 6 using xhci_hcd [ 3.386200] usb 1-4.3: New USB device found, idVendor=0cf3, idProduct=3004 [ 3.386203] usb 1-4.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.425277] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000 [ 3.491748] [drm:wait_panel_status] Wait complete [ 3.491754] [drm:_edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 3.491756] [drm:_edp_panel_vdd_on] eDP was not running [ 3.707626] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 3.708075] [drm:intel_dp_start_link_train] clock recovery OK [ 3.708076] [drm:intel_edp_panel_on] Turn eDP power on [ 3.708078] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 3.708082] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008 [ 3.708084] [drm:wait_panel_status] Wait complete [ 3.708086] [drm:wait_panel_on] Wait for panel power on [ 3.708089] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b [ 3.741555] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 3.743529] [drm:valleyview_enable_rps] GPLL enabled? yes [ 3.743531] [drm:valleyview_enable_rps] GPU status: 0x0000c6d0 [ 3.743533] [drm:valleyview_enable_rps] current GPU freq: 312 MHz (198) [ 3.743535] [drm:valleyview_enable_rps] setting GPU freq to 646 MHz (214) [ 3.743537] [drm:valleyview_set_rps] GPU freq request from 312 MHz (198) to 646 MHz (214) [ 3.841878] [drm:valleyview_set_rps] GPU freq request from 646 MHz (214) to 167 MHz (191) [ 3.862005] [drm:wait_panel_status] Wait complete [ 3.862018] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 3.862032] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003 [ 3.909830] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 3.909835] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 3.911070] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful [ 3.911267] [drm:g4x_check_srwm] SR watermark: display plane 56, cursor 2 [ 3.911269] [drm:g4x_check_srwm] SR watermark: display plane 109, cursor 2 [ 3.911272] [drm:valleyview_update_wm] Setting FIFO watermarks - A: plane=109, cursor=2, B: plane=2, cursor=2, SR: plane=56, cursor=2 [ 3.911275] [drm:intel_set_memory_cxsr] memory self-refresh is enabled [ 3.911280] [drm:intel_edp_backlight_on] [ 3.911282] [drm:intel_panel_enable_backlight] pipe A [ 3.911285] [drm:intel_panel_actually_set_backlight] set backlight PWM = 3906 [ 3.911300] [drm:intel_connector_check_state] [CONNECTOR:28:eDP-1] [ 3.911306] [drm:check_encoder_state] [ENCODER:17:DAC-17] [ 3.911309] [drm:check_encoder_state] [ENCODER:18:TMDS-18] [ 3.911311] [drm:check_encoder_state] [ENCODER:23:TMDS-23] [ 3.911313] [drm:check_encoder_state] [ENCODER:25:TMDS-25] [ 3.911315] [drm:check_encoder_state] [ENCODER:27:TMDS-27] [ 3.911317] [drm:check_crtc_state] [CRTC:8] [ 3.912668] [drm:check_crtc_state] [CRTC:13] [ 3.912674] [drm:intel_crtc_set_config] [CRTC:13] [NOFB] [ 3.912678] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0 [ 3.912681] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8] [ 3.912693] Console: switching to colour frame buffer device 170x48 [ 3.912707] [drm:intel_crtc_set_config] [CRTC:8] [FB:35] #connectors=1 (x y) (0 0) [ 3.912711] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 3.912713] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8] [ 3.954945] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.958067] i915 0000:00:02.0: registered panic notifier [ 3.961709] [Firmware Bug]: ACPI(PXSX) defines _DOD but not _DOS [ 3.964845] ACPI: Video Device [PXSX] (multi-head: yes rom: yes post: no) [ 3.968095] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:19/LNXVIDEO:00/input/input7 [ 3.972671] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3.976074] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8 [ 3.979467] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0 [ 3.990587] dracut: Starting plymouth daemon [ 4.009417] [drm:intel_crtc_set_config] [CRTC:8] [FB:35] #connectors=1 (x y) (0 0) [ 4.009423] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 4.009426] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8] [ 4.032205] [drm:intel_crtc_set_config] [CRTC:8] [FB:35] #connectors=1 (x y) (0 0) [ 4.032211] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 4.032214] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8] [ 4.186949] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 4.194261] ACPI: AC Adapter [ADP0] (on-line) [ 4.195276] wmi: Mapper loaded [ 4.212100] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 4.215438] ACPI: Battery Slot [BAT0] (battery present) [ 4.222796] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 4.223296] ACPI Warning: SystemIO range 0x0000000000003000-0x000000000000301f conflicts with OpRegion 0x0000000000003000-0x000000000000300f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258) [ 4.223297] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.225663] snd_hda_intel 0000:00:1b.0: irq 106 for MSI/MSI-X [ 4.226380] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 4.240220] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 4.246374] r8169 0000:03:00.0: irq 107 for MSI/MSI-X [ 4.246706] r8169 0000:03:00.0 eth1: RTL8168g/8111g at 0xffffc9000064a000, 28:d2:44:8a:0c:39, XID 10900880 IRQ 107 [ 4.247815] sound hdaudioC0D0: CX20751/2: BIOS auto-probing. [ 4.248543] sound hdaudioC0D0: autoconfig: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker [ 4.248546] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.248549] sound hdaudioC0D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0) [ 4.248551] sound hdaudioC0D0: mono: mono_out=0x0 [ 4.248553] sound hdaudioC0D0: inputs: [ 4.248556] sound hdaudioC0D0: Internal Mic=0x1a [ 4.248558] sound hdaudioC0D0: Mic=0x19 [ 4.251365] sound hdaudioC0D0: Enable sync_write for stable communication [ 4.274833] iTCO_vendor_support: vendor-support=0 [ 4.275105] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 4.275162] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460) [ 4.276750] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 4.296181] r8169 0000:03:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 4.303380] [drm:intel_crtc_set_config] [CRTC:8] [FB:35] #connectors=1 (x y) (0 0) [ 4.303387] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 4.303390] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8] [ 4.380309] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null) [ 4.541332] dracut: Checking ext4: /dev/sda8 [ 4.545234] dracut: issuing e2fsck -a /dev/sda8 [ 4.682101] random: nonblocking pool is initialized [ 5.263007] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 5.263039] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 5.314485] dracut: /dev/sda8: clean, 689123/22691840 files, 10764364/90749696 blocks [ 5.318918] dracut: Remounting /dev/sda8 with -o errors=remount-ro,ro [ 5.392762] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 5.495550] dracut: Mounted root filesystem /dev/sda8 [ 5.611706] device-mapper: uevent: version 1.0.3 [ 5.615521] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 5.790692] dracut: Switching root [ 6.711047] init: plymouth-upstart-bridge main process (2432) terminated with status 1 [ 6.714803] init: plymouth-upstart-bridge main process ended, respawning [ 6.724434] init: plymouth-upstart-bridge main process (2441) terminated with status 1 [ 6.728168] init: plymouth-upstart-bridge main process ended, respawning [ 6.735631] init: plymouth-upstart-bridge main process (2443) terminated with status 1 [ 6.739273] init: plymouth-upstart-bridge main process ended, respawning [ 6.748318] init: plymouth-upstart-bridge main process (2444) terminated with status 1 [ 6.751821] init: plymouth-upstart-bridge main process ended, respawning [ 6.760667] init: plymouth-upstart-bridge main process (2445) terminated with status 1 [ 6.764071] init: plymouth-upstart-bridge main process ended, respawning [ 6.773226] init: plymouth-upstart-bridge main process (2447) terminated with status 1 [ 6.776522] init: plymouth-upstart-bridge main process ended, respawning [ 6.785535] init: plymouth-upstart-bridge main process (2449) terminated with status 1 [ 6.788770] init: plymouth-upstart-bridge main process ended, respawning [ 6.797554] init: plymouth-upstart-bridge main process (2451) terminated with status 1 [ 6.800712] init: plymouth-upstart-bridge main process ended, respawning [ 6.810077] init: plymouth-upstart-bridge main process (2453) terminated with status 1 [ 6.813038] init: plymouth-upstart-bridge main process ended, respawning [ 6.822497] init: plymouth-upstart-bridge main process (2455) terminated with status 1 [ 6.825307] init: plymouth-upstart-bridge main process ended, respawning [ 6.833600] init: plymouth-upstart-bridge main process (2457) terminated with status 1 [ 6.836239] init: plymouth-upstart-bridge respawning too fast, stopped [ 7.124604] init: ureadahead main process (2434) terminated with status 5 [ 8.748899] systemd-udevd[2556]: starting version 204 [ 9.395021] systemd-udevd[3090]: could not open moddep file '/lib/modules/3.16.0_kcloud_4b1c28_20140806+/modules.dep.bin' [ 9.825811] [drm:intel_crtc_set_config] [CRTC:8] [FB:35] #connectors=1 (x y) (0 0) [ 9.825818] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 9.825821] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8] [ 9.834785] [drm:intel_crtc_set_config] [CRTC:8] [FB:35] #connectors=1 (x y) (0 0) [ 9.834792] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 9.834795] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8] [ 10.841010] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE [ 12.632839] systemd-udevd[3078]: renamed network interface eth0 to eth2 [ 13.233140] Adding 3999740k swap on /dev/sda6. Priority:-1 extents:1 across:3999740k [ 13.590509] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro [ 14.641015] init: plymouth-log main process (3363) terminated with status 1 [ 15.009932] init: failsafe main process (3364) killed by TERM signal [ 15.042716] init: idmapd-mounting (/lib/modules/3.16.0-rc6_drm-intel-nightly_af1aab_20140724_debug+) main process (3281) killed by TERM signal [ 18.033238] init: bluetooth main process (3517) terminated with status 1 [ 18.033268] init: bluetooth main process ended, respawning [ 18.597527] init: bluetooth main process (3668) terminated with status 1 [ 18.597553] init: bluetooth main process ended, respawning [ 18.664324] init: bluetooth main process (3699) terminated with status 1 [ 18.664349] init: bluetooth main process ended, respawning [ 18.705928] init: bluetooth main process (3723) terminated with status 1 [ 18.705954] init: bluetooth main process ended, respawning [ 18.716824] init: cups main process (3648) killed by HUP signal [ 18.716850] init: cups main process ended, respawning [ 18.848618] init: bluetooth main process (3758) terminated with status 1 [ 18.848645] init: bluetooth main process ended, respawning [ 18.882217] init: bluetooth main process (3782) terminated with status 1 [ 18.882243] init: bluetooth main process ended, respawning [ 18.914980] init: bluetooth main process (3806) terminated with status 1 [ 18.915005] init: bluetooth main process ended, respawning [ 18.947206] init: bluetooth main process (3830) terminated with status 1 [ 18.947232] init: bluetooth main process ended, respawning [ 18.981089] init: bluetooth main process (3855) terminated with status 1 [ 18.981116] init: bluetooth main process ended, respawning [ 19.015065] init: bluetooth main process (3879) terminated with status 1 [ 19.015091] init: bluetooth main process ended, respawning [ 19.048428] init: bluetooth main process (3903) terminated with status 1 [ 19.048455] init: bluetooth respawning too fast, stopped [ 19.268951] init: cups-browsed main process (3667) terminated with status 127 [ 19.268980] init: cups-browsed main process ended, respawning [ 19.285742] init: cups-browsed main process (3933) terminated with status 127 [ 19.285769] init: cups-browsed main process ended, respawning [ 19.304457] init: cups-browsed main process (3940) terminated with status 127 [ 19.304484] init: cups-browsed main process ended, respawning [ 19.324206] init: cups-browsed main process (3947) terminated with status 127 [ 19.324232] init: cups-browsed respawning too fast, stopped [ 19.406859] init: whoopsie main process (3612) terminated with status 127 [ 19.406884] init: whoopsie main process ended, respawning [ 19.696985] init: plymouth-stop pre-start process (3967) terminated with status 1 [ 20.897181] asix 1-2:1.0 eth2: link down [ 20.981610] r8169 0000:03:00.0 p3p1: link down [ 22.691370] asix 1-2:1.0 eth2: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 48.645859] init: cups main process (4361) terminated with status 127 [ 48.645887] init: cups main process ended, respawning [ 77.057232] PM: Syncing filesystems ... done. [ 77.164868] PM: Preparing system for mem sleep [ 77.165602] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 77.166874] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 77.167942] PM: Entering mem sleep [ 77.168883] Suspending console(s) (use no_console_suspend to debug) [ 77.169637] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 77.186836] [drm:intel_display_power_get] enabling always-on [ 77.210624] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 77.234399] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 77.234404] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 77.234406] [drm:intel_edp_backlight_off] [ 77.238564] sd 0:0:0:0: [sda] Stopping disk [ 77.435445] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 77.436124] [drm:intel_edp_panel_off] Turn eDP power off [ 77.436128] [drm:wait_panel_off] Wait for panel power off time [ 77.436133] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 77.479583] [drm:wait_panel_status] Wait complete [ 77.529637] [drm:intel_dp_link_down] [ 77.580628] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 77.580632] [drm:valleyview_update_wm] Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0 [ 77.612758] [drm:valleyview_set_rps] GPU freq request from 167 MHz (191) to 167 MHz (191) [ 77.615937] [drm:intel_display_power_put] disabling dpio-common [ 77.627715] [drm:intel_display_power_put] disabling dpio-tx-c-23 [ 77.639726] [drm:intel_display_power_put] disabling dpio-tx-c-01 [ 77.651735] [drm:intel_display_power_put] disabling dpio-tx-b-23 [ 77.663763] [drm:intel_display_power_put] disabling dpio-tx-b-01 [ 77.675772] [drm:intel_display_power_put] disabling display [ 77.687784] [drm:intel_display_power_put] disabling always-on [ 77.708262] PM: suspend of devices complete after 538.718 msecs [ 77.720215] PM: late suspend of devices complete after 11.935 msecs [ 77.721225] r8169 0000:03:00.0: System wakeup enabled by ACPI [ 77.721615] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 77.731758] PM: noirq suspend of devices complete after 11.529 msecs [ 77.731803] ACPI: Preparing to enter system sleep state S3 [ 77.732264] PM: Saving platform NVS memory [ 77.750996] Disabling non-boot CPUs ... [ 77.752297] smpboot: CPU 1 is now offline [ 77.753950] smpboot: CPU 2 is now offline [ 77.754512] Broke affinity for irq 103 [ 77.755569] smpboot: CPU 3 is now offline [ 77.756402] ACPI: Low-level resume complete [ 77.756470] PM: Restoring platform NVS memory [ 77.761926] CPU0: Thermal monitoring handled by SMI [ 77.761943] Enabling non-boot CPUs ... [ 77.761998] x86: Booting SMP configuration: [ 77.762000] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 77.773021] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 77.773021] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 77.777826] CPU1: Thermal monitoring handled by SMI [ 77.780352] CPU1 is up [ 77.780385] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 77.796210] CPU2: Thermal monitoring handled by SMI [ 77.798638] CPU2 is up [ 77.798666] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 77.814489] CPU3: Thermal monitoring handled by SMI [ 77.816914] CPU3 is up [ 77.821332] ACPI: Waking up from system sleep state S3 [ 77.827989] acpi LNXPOWER:06: Turning OFF [ 77.828016] acpi LNXPOWER:05: Turning OFF [ 77.884738] acpi LNXPOWER:02: Turning OFF [ 77.884791] acpi LNXPOWER:01: Turning OFF [ 77.884834] acpi LNXPOWER:00: Turning OFF [ 77.885167] pci 0000:01:00.0: Refused to change power state, currently in D3 [ 77.895767] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 77.945912] PM: noirq resume of devices complete after 61.015 msecs [ 77.945984] [drm:valleyview_set_rps] GPU freq request from 167 MHz (191) to 167 MHz (191) [ 77.953699] [drm:vlv_cmnlane_wa] toggling display PHY side reset [ 77.963709] [drm:intel_display_power_get] enabling always-on [ 77.963711] [drm:intel_display_power_get] enabling display [ 77.969711] [drm:intel_display_power_get] enabling dpio-tx-b-01 [ 77.975718] [drm:intel_display_power_get] enabling dpio-tx-b-23 [ 77.981721] [drm:intel_display_power_get] enabling dpio-tx-c-01 [ 77.987727] [drm:intel_display_power_get] enabling dpio-tx-c-23 [ 77.993730] [drm:intel_display_power_get] enabling dpio-common [ 78.041816] PM: early resume of devices complete after 95.795 msecs [ 78.041984] r8169 0000:03:00.0: System wakeup disabled by ACPI [ 78.042062] snd_hda_intel 0000:00:1b.0: irq 106 for MSI/MSI-X [ 78.044889] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it [ 78.045204] [drm:intel_opregion_setup] graphic opregion physical addr: 0x78bfd018 [ 78.045222] [drm:intel_opregion_setup] Public ACPI methods supported [ 78.045224] [drm:intel_opregion_setup] ASLE supported [ 78.045231] [drm:intel_crt_reset] pch crt adpa set to 0xf40000 [ 78.045237] [drm:init_status_page] render ring hws offset: 0x0040b000 [ 78.046985] [drm:init_status_page] bsd ring hws offset: 0x0042f000 [ 78.047004] [drm:init_status_page] blitter ring hws offset: 0x00452000 [ 78.050193] r8169 0000:03:00.0 p3p1: link down [ 78.052849] [drm:vlv_update_cdclk] Current CD clock rate: 333333 kHz [ 78.052849] sd 0:0:0:0: [sda] Starting disk [ 78.052999] [drm:valleyview_init_clock_gating] DDR speed: 1333 MHz [ 78.052999] [drm:intel_modeset_readout_hw_state] [CRTC:8] hw state readout: disabled [ 78.053002] [drm:intel_modeset_readout_hw_state] [CRTC:13] hw state readout: disabled [ 78.053005] [drm:intel_modeset_readout_hw_state] [ENCODER:17:DAC-17] hw state readout: disabled, pipe A [ 78.053009] [drm:intel_modeset_readout_hw_state] [ENCODER:18:TMDS-18] hw state readout: disabled, pipe A [ 78.053011] [drm:intel_modeset_readout_hw_state] [ENCODER:23:TMDS-23] hw state readout: disabled, pipe A [ 78.053015] [drm:intel_modeset_readout_hw_state] [ENCODER:25:TMDS-25] hw state readout: disabled, pipe A [ 78.053017] [drm:intel_modeset_readout_hw_state] [ENCODER:27:TMDS-27] hw state readout: disabled, pipe A [ 78.053020] [drm:intel_modeset_readout_hw_state] [CONNECTOR:28:eDP-1] hw state readout: disabled [ 78.053022] [drm:intel_modeset_readout_hw_state] [CONNECTOR:16:VGA-1] hw state readout: disabled [ 78.053025] [drm:intel_modeset_readout_hw_state] [CONNECTOR:19:HDMI-A-1] hw state readout: disabled [ 78.053027] [drm:intel_modeset_readout_hw_state] [CONNECTOR:24:DP-1] hw state readout: disabled [ 78.053032] [drm:intel_modeset_readout_hw_state] [CONNECTOR:26:HDMI-A-2] hw state readout: disabled [ 78.053036] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe A [ 78.053038] [drm:i915_get_vblank_timestamp] crtc 0 is disabled [ 78.053040] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe A [ 78.053044] [drm:intel_dump_pipe_config] [CRTC:8][setup_hw_state] config for pipe A [ 78.053046] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 78.053047] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 78.053050] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 78.053052] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 78.053054] [drm:intel_dump_pipe_config] requested mode: [ 78.053058] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 78.053059] [drm:intel_dump_pipe_config] adjusted mode: [ 78.053062] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 78.053065] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 78.053066] [drm:intel_dump_pipe_config] port clock: 0 [ 78.053068] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 78.053070] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 78.053072] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 78.053073] [drm:intel_dump_pipe_config] ips: 0 [ 78.053075] [drm:intel_dump_pipe_config] double wide: 0 [ 78.053077] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B [ 78.053079] [drm:i915_get_vblank_timestamp] crtc 1 is disabled [ 78.053080] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B [ 78.053083] [drm:intel_dump_pipe_config] [CRTC:13][setup_hw_state] config for pipe B [ 78.053084] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 78.053086] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 78.053088] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 78.053091] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 78.053092] [drm:intel_dump_pipe_config] requested mode: [ 78.053095] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 78.053096] [drm:intel_dump_pipe_config] adjusted mode: [ 78.053100] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 78.053103] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 78.053104] [drm:intel_dump_pipe_config] port clock: 0 [ 78.053105] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 78.053108] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 78.053109] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 78.053111] [drm:intel_dump_pipe_config] ips: 0 [ 78.053112] [drm:intel_dump_pipe_config] double wide: 0 [ 78.053116] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 78.053119] [drm:connected_sink_compute_bpp] [CONNECTOR:28:eDP-1] checking for sink bpp constrains [ 78.053121] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18 [ 78.053126] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 0a pixel clock 71000KHz [ 78.053127] [drm:intel_dp_compute_config] using min 1 lanes per VBT [ 78.053129] [drm:intel_dp_compute_config] using min 06 link bw per VBT [ 78.053131] [drm:intel_dp_compute_config] DP link bw 06 lane count 1 clock 162000 bpp 18 [ 78.053133] [drm:intel_dp_compute_config] DP link bw required 127800 available 129600 [ 78.053136] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1 [ 78.053138] [drm:intel_dump_pipe_config] [CRTC:8][modeset] config for pipe A [ 78.053139] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 78.053141] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 78.053143] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 78.053146] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 2068024, gmch_n: 2097152, link_m: 114890, link_n: 262144, tu: 64 [ 78.053147] [drm:intel_dump_pipe_config] requested mode: [ 78.053151] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 71000 1366 1404 1426 1482 768 771 777 798 0x48 0xa [ 78.053152] [drm:intel_dump_pipe_config] adjusted mode: [ 78.053156] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 71000 1366 1404 1426 1482 768 771 777 798 0x48 0xa [ 78.053160] [drm:intel_dump_crtc_timings] crtc timings: 71000 1366 1404 1426 1482 768 771 777 798, type: 0x48 flags: 0xa [ 78.053161] [drm:intel_dump_pipe_config] port clock: 162000 [ 78.053163] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 78.053165] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 78.053167] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 78.053168] [drm:intel_dump_pipe_config] ips: 0 [ 78.053170] [drm:intel_dump_pipe_config] double wide: 0 [ 78.131023] [drm:vlv_update_cdclk] Current CD clock rate: 266667 kHz [ 78.131023] [drm:intel_display_power_put] disabling always-on [ 78.153008] [drm:i9xx_update_primary_plane] Writing base 00475000 00000000 0 0 5504 [ 78.171016] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 0 t8 0 t9 0 t10 0 t11_t12 4000 [ 78.171019] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 78.171021] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 500 [ 78.171023] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200 [ 78.171028] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f05 [ 78.195034] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 78.195037] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 78.195040] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000 [ 78.195042] [drm:wait_panel_status] Wait complete [ 78.195045] [drm:_edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 78.195047] [drm:_edp_panel_vdd_on] eDP was not running [ 78.360238] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 78.362937] ata2.00: configured for UDMA/100 [ 78.391831] usb 1-4: reset high-speed USB device number 3 using xhci_hcd [ 78.391863] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. [ 78.391866] usb 1-4: hub failed to enable device, error -22 [ 78.411280] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 78.425289] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 78.425727] [drm:intel_dp_start_link_train] clock recovery OK [ 78.425728] [drm:intel_edp_panel_on] Turn eDP power on [ 78.425730] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 78.425734] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008 [ 78.425736] [drm:wait_panel_status] Wait complete [ 78.425738] [drm:wait_panel_on] Wait for panel power on [ 78.425741] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b [ 78.544639] usb 1-4: reset high-speed USB device number 3 using xhci_hcd [ 78.544661] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. [ 78.544664] usb 1-4: hub failed to enable device, error -22 [ 78.579617] [drm:wait_panel_status] Wait complete [ 78.579623] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 78.579628] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003 [ 78.627447] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 78.627452] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 78.628374] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful [ 78.628568] [drm:g4x_check_srwm] SR watermark: display plane 56, cursor 2 [ 78.628570] [drm:g4x_check_srwm] SR watermark: display plane 109, cursor 2 [ 78.628573] [drm:valleyview_update_wm] Setting FIFO watermarks - A: plane=109, cursor=2, B: plane=2, cursor=2, SR: plane=56, cursor=2 [ 78.628576] [drm:intel_set_memory_cxsr] memory self-refresh is enabled [ 78.628582] [drm:intel_edp_backlight_on] [ 78.628584] [drm:intel_panel_enable_backlight] pipe A [ 78.628587] [drm:intel_panel_actually_set_backlight] set backlight PWM = 3906 [ 78.628603] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 78.694498] [drm:intel_connector_check_state] [CONNECTOR:28:eDP-1] [ 78.694503] [drm:check_encoder_state] [ENCODER:17:DAC-17] [ 78.694506] [drm:check_encoder_state] [ENCODER:18:TMDS-18] [ 78.694508] [drm:check_encoder_state] [ENCODER:23:TMDS-23] [ 78.694510] [drm:check_encoder_state] [ENCODER:25:TMDS-25] [ 78.694512] [drm:check_encoder_state] [ENCODER:27:TMDS-27] [ 78.694515] [drm:check_crtc_state] [CRTC:8] [ 78.696503] [drm:check_crtc_state] [CRTC:13] [ 78.697467] usb 1-4: reset high-speed USB device number 3 using xhci_hcd [ 78.709433] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880079062d20 [ 78.720516] [drm:intel_dp_detect] [CONNECTOR:28:eDP-1] [ 78.720856] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 78.721019] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 78.744534] [drm:drm_helper_hpd_irq_event] [CONNECTOR:28:eDP-1] status updated from unknown to connected [ 78.744562] [drm:drm_fb_helper_hotplug_event] [ 78.744565] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:eDP-1] [ 78.768596] [drm:intel_dp_detect] [CONNECTOR:28:eDP-1] [ 78.768766] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 78.768928] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 78.816541] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 78.840618] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:eDP-1] probed modes : [ 78.840623] [drm:drm_mode_debug_printmodeline] Modeline 29:"1366x768" 60 71000 1366 1404 1426 1482 768 771 777 798 0x48 0xa [ 78.840625] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:16:VGA-1] [ 78.840628] [drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1 [ 78.848627] [drm:valleyview_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40000 [ 78.854630] [drm:valleyview_crt_detect_hotplug] valleyview hotplug adpa=0xf40000, result 0 [ 78.854632] [drm:intel_crt_detect] CRT not detected via hotplug [ 78.854862] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 78.854865] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 78.854867] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 78.854869] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 78.855147] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 78.855149] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 78.855150] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 78.862627] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:16:VGA-1] disconnected [ 78.862630] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-1] [ 78.862632] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-1] [ 78.886879] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 78.886882] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 78.910665] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-1] disconnected [ 78.910668] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:DP-1] [ 78.934680] [drm:intel_dp_detect] [CONNECTOR:24:DP-1] [ 78.958699] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:DP-1] disconnected [ 78.958702] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-2] [ 78.958704] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2] [ 78.978219] usb 1-4.1: reset high-speed USB device number 4 using xhci_hcd [ 78.978240] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3. [ 78.978243] usb 1-4.1: hub failed to enable device, error -22 [ 78.983000] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 79.006736] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-2] disconnected [ 79.006740] [drm:drm_setup_crtcs] [ 79.006742] [drm:drm_enable_connectors] connector 28 enabled? yes [ 79.006744] [drm:drm_enable_connectors] connector 16 enabled? no [ 79.006745] [drm:drm_enable_connectors] connector 19 enabled? no [ 79.006747] [drm:drm_enable_connectors] connector 24 enabled? no [ 79.006749] [drm:drm_enable_connectors] connector 26 enabled? no [ 79.006751] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 79.006753] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 [ 79.006756] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:8]: 1366x768 [ 79.006758] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping [ 79.006759] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 79.006761] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 79.006762] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 79.006764] [drm:drm_setup_crtcs] desired mode 1366x768 set on crtc 8 [ 79.006772] [drm:intel_crtc_set_config] [CRTC:8] [FB:35] #connectors=1 (x y) (0 0) [ 79.006776] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 79.006778] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8] [ 79.006782] [drm:intel_crtc_set_config] [CRTC:13] [NOFB] [ 79.006784] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0 [ 79.006786] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8] [ 79.008848] [drm:intel_crtc_set_config] [CRTC:8] [FB:35] #connectors=1 (x y) (0 0) [ 79.008851] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 79.008853] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8] [ 79.041097] usb 1-4.1: reset high-speed USB device number 4 using xhci_hcd [ 79.041118] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3. [ 79.041121] usb 1-4.1: hub failed to enable device, error -22 [ 79.104144] usb 1-4.1: reset high-speed USB device number 4 using xhci_hcd [ 79.138976] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880175c07060 [ 79.178990] usb 1-4.2: reset high-speed USB device number 5 using xhci_hcd [ 79.179020] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4. [ 79.179024] usb 1-4.2: hub failed to enable device, error -22 [ 79.243733] usb 1-4.2: reset high-speed USB device number 5 using xhci_hcd [ 79.243774] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4. [ 79.243777] usb 1-4.2: hub failed to enable device, error -22 [ 79.318796] usb 1-4.2: reset high-speed USB device number 5 using xhci_hcd [ 79.330512] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801763fca00 [ 79.330515] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801763fca48 [ 79.330518] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801763fca90 [ 79.394146] usb 1-4.3: reset full-speed USB device number 6 using xhci_hcd [ 79.394180] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 79.394183] usb 1-4.3: hub failed to enable device, error -22 [ 79.458969] usb 1-4.3: reset full-speed USB device number 6 using xhci_hcd [ 79.459001] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5. [ 79.459004] usb 1-4.3: hub failed to enable device, error -22 [ 79.534985] usb 1-4.3: reset full-speed USB device number 6 using xhci_hcd [ 79.548595] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801763fcd00 [ 79.548599] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801763fcd90 [ 79.548602] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801763fcd48 [ 79.548605] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007901f4c8 [ 79.548608] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007901f480 [ 79.550689] PM: resume of devices complete after 1507.638 msecs [ 79.552852] PM: Finishing wakeup. [ 79.552856] Restarting tasks ... done. [ 79.801404] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 79.803203] [drm:valleyview_enable_rps] GPLL enabled? yes [ 79.803208] [drm:valleyview_enable_rps] GPU status: 0x0000c6d0 [ 79.803212] [drm:valleyview_enable_rps] current GPU freq: 312 MHz (198) [ 79.803215] [drm:valleyview_enable_rps] setting GPU freq to 646 MHz (214) [ 79.803220] [drm:valleyview_set_rps] GPU freq request from 312 MHz (198) to 646 MHz (214) [ 80.452748] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 80.518278] ata1.00: configured for UDMA/133 [ 81.077541] init: cups main process (4560) terminated with status 127 [ 81.077570] init: cups main process ended, respawning [ 81.130296] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 81.130305] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 91.972671] usb 1-2: USB disconnect, device number 2 [ 91.972825] asix 1-2:1.0 eth2: unregister 'asix' usb-0000:00:14.0-2, ASIX AX88772B USB 2.0 Ethernet [ 100.003142] usb 1-2: new high-speed USB device number 7 using xhci_hcd [ 100.185297] usb 1-2: New USB device found, idVendor=0b95, idProduct=772b [ 100.185305] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 100.185310] usb 1-2: Product: AX88772B [ 100.185314] usb 1-2: Manufacturer: ASIX Elec. Corp. [ 100.185318] usb 1-2: SerialNumber: 00001B [ 100.491031] asix 1-2:1.0 eth0: register 'asix' at usb-0000:00:14.0-2, ASIX AX88772B USB 2.0 Ethernet, 00:24:8c:02:86:27 [ 100.508153] systemd-udevd[4639]: renamed network interface eth0 to eth2 [ 104.432885] asix 1-2:1.0 eth2: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 111.210215] init: cups main process (4785) terminated with status 127 [ 111.210241] init: cups main process ended, respawning [ 129.886217] PM: Syncing filesystems ... done. [ 130.001036] Freezing user space processes ... (elapsed 0.000 seconds) done. [ 130.002173] PM: Marking nosave pages: [mem 0x0006f000-0x0006ffff] [ 130.002177] PM: Marking nosave pages: [mem 0x00086000-0x000fffff] [ 130.002183] PM: Marking nosave pages: [mem 0x20000000-0x200fffff] [ 130.002192] PM: Marking nosave pages: [mem 0x7823e000-0x78c8cfff] [ 130.002249] PM: Marking nosave pages: [mem 0x796f2000-0x79ff1fff] [ 130.002299] PM: Marking nosave pages: [mem 0x7a000000-0xffffffff] [ 130.005827] PM: Basic memory bitmaps created [ 130.006757] PM: Preallocating image memory... done (allocated 74246 pages) [ 130.172555] PM: Allocated 296984 kbytes in 0.16 seconds (1856.15 MB/s) [ 130.172559] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 130.173957] Suspending console(s) (use no_console_suspend to debug) [ 130.175067] [drm:intel_display_power_get] enabling always-on [ 130.198562] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 130.222331] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 130.222337] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 130.222339] [drm:intel_edp_backlight_off] [ 130.423501] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 130.424144] [drm:intel_edp_panel_off] Turn eDP power off [ 130.424146] [drm:wait_panel_off] Wait for panel power off time [ 130.424150] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 130.467533] [drm:wait_panel_status] Wait complete [ 130.525578] [drm:intel_dp_link_down] [ 130.576626] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 130.576630] [drm:valleyview_update_wm] Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0 [ 130.608664] [drm:valleyview_set_rps] GPU freq request from 646 MHz (214) to 167 MHz (191) [ 130.613687] [drm:intel_display_power_put] disabling dpio-common [ 130.625660] [drm:intel_display_power_put] disabling dpio-tx-c-23 [ 130.637670] [drm:intel_display_power_put] disabling dpio-tx-c-01 [ 130.649681] [drm:intel_display_power_put] disabling dpio-tx-b-23 [ 130.661688] [drm:intel_display_power_put] disabling dpio-tx-b-01 [ 130.673700] [drm:intel_display_power_put] disabling display [ 130.685708] [drm:intel_display_power_put] disabling always-on [ 130.685734] PM: freeze of devices complete after 511.352 msecs [ 130.686197] PM: late freeze of devices complete after 0.458 msecs [ 130.687867] PM: noirq freeze of devices complete after 1.661 msecs [ 130.687900] ACPI: Preparing to enter system sleep state S4 [ 130.688131] PM: Saving platform NVS memory [ 130.707123] Disabling non-boot CPUs ... [ 130.708394] smpboot: CPU 1 is now offline [ 130.710041] smpboot: CPU 2 is now offline [ 130.711675] smpboot: CPU 3 is now offline [ 130.712250] PM: Creating hibernation image: [ 130.840988] PM: Need to copy 73443 pages [ 130.840991] PM: Normal pages needed: 73443 + 1024, available pages: 945127 [ 130.712446] PM: Restoring platform NVS memory [ 130.717798] CPU0: Thermal monitoring handled by SMI [ 130.717815] Enabling non-boot CPUs ... [ 130.717869] x86: Booting SMP configuration: [ 130.717871] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 130.733695] CPU1: Thermal monitoring handled by SMI [ 130.736227] CPU1 is up [ 130.736258] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 130.752381] CPU2: Thermal monitoring handled by SMI [ 130.754828] CPU2 is up [ 130.754859] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 130.770683] CPU3: Thermal monitoring handled by SMI [ 130.773111] CPU3 is up [ 130.777577] ACPI: Waking up from system sleep state S4 [ 130.988059] acpi LNXPOWER:06: Turning OFF [ 130.989916] acpi LNXPOWER:02: Turning OFF [ 130.990052] acpi LNXPOWER:01: Turning OFF [ 130.990095] acpi LNXPOWER:00: Turning OFF [ 135.046573] PM: noirq restore of devices complete after 4053.165 msecs [ 135.046744] [drm:valleyview_set_rps] GPU freq request from 167 MHz (191) to 167 MHz (191) [ 135.049994] [drm:intel_display_power_get] enabling always-on [ 135.049996] [drm:intel_display_power_get] enabling display [ 135.062000] [drm:intel_display_power_get] enabling dpio-tx-b-01 [ 135.074009] [drm:intel_display_power_get] enabling dpio-tx-b-23 [ 135.086019] [drm:intel_display_power_get] enabling dpio-tx-c-01 [ 135.098028] [drm:intel_display_power_get] enabling dpio-tx-c-23 [ 135.110039] [drm:intel_display_power_get] enabling dpio-common [ 135.158200] PM: early restore of devices complete after 111.504 msecs [ 135.206561] usb usb1: root hub lost power or was reset [ 135.206564] usb usb2: root hub lost power or was reset [ 135.207108] xhci_hcd 0000:00:14.0: irq 104 for MSI/MSI-X [ 135.207340] snd_hda_intel 0000:00:1b.0: irq 106 for MSI/MSI-X [ 135.208777] sd 0:0:0:0: [sda] Starting disk [ 135.209601] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it [ 135.209916] [drm:intel_opregion_setup] graphic opregion physical addr: 0x78bfd018 [ 135.209936] [drm:intel_opregion_setup] Public ACPI methods supported [ 135.209937] [drm:intel_opregion_setup] ASLE supported [ 135.209945] [drm:intel_crt_reset] pch crt adpa set to 0xf40000 [ 135.209951] [drm:init_status_page] render ring hws offset: 0x0040b000 [ 135.212142] [drm:init_status_page] bsd ring hws offset: 0x0042f000 [ 135.212165] [drm:init_status_page] blitter ring hws offset: 0x00452000 [ 135.215916] r8169 0000:03:00.0 p3p1: link down [ 135.218223] [drm:vlv_update_cdclk] Current CD clock rate: 266667 kHz [ 135.218244] [drm:valleyview_init_clock_gating] DDR speed: 1333 MHz [ 135.218244] [drm:intel_modeset_readout_hw_state] [CRTC:8] hw state readout: disabled [ 135.218247] [drm:intel_modeset_readout_hw_state] [CRTC:13] hw state readout: disabled [ 135.218250] [drm:intel_modeset_readout_hw_state] [ENCODER:17:DAC-17] hw state readout: disabled, pipe A [ 135.218253] [drm:intel_modeset_readout_hw_state] [ENCODER:18:TMDS-18] hw state readout: disabled, pipe A [ 135.218256] [drm:intel_modeset_readout_hw_state] [ENCODER:23:TMDS-23] hw state readout: disabled, pipe A [ 135.218259] [drm:intel_modeset_readout_hw_state] [ENCODER:25:TMDS-25] hw state readout: disabled, pipe A [ 135.218261] [drm:intel_modeset_readout_hw_state] [ENCODER:27:TMDS-27] hw state readout: disabled, pipe A [ 135.218264] [drm:intel_modeset_readout_hw_state] [CONNECTOR:28:eDP-1] hw state readout: disabled [ 135.218267] [drm:intel_modeset_readout_hw_state] [CONNECTOR:16:VGA-1] hw state readout: disabled [ 135.218269] [drm:intel_modeset_readout_hw_state] [CONNECTOR:19:HDMI-A-1] hw state readout: disabled [ 135.218272] [drm:intel_modeset_readout_hw_state] [CONNECTOR:24:DP-1] hw state readout: disabled [ 135.218275] [drm:intel_modeset_readout_hw_state] [CONNECTOR:26:HDMI-A-2] hw state readout: disabled [ 135.218279] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe A [ 135.218281] [drm:i915_get_vblank_timestamp] crtc 0 is disabled [ 135.218283] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe A [ 135.218287] [drm:intel_dump_pipe_config] [CRTC:8][setup_hw_state] config for pipe A [ 135.218288] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 135.218290] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 135.218293] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 135.218295] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 135.218296] [drm:intel_dump_pipe_config] requested mode: [ 135.218300] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 135.218302] [drm:intel_dump_pipe_config] adjusted mode: [ 135.218305] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 135.218308] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 135.218309] [drm:intel_dump_pipe_config] port clock: 0 [ 135.218311] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 135.218313] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 135.218315] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 135.218316] [drm:intel_dump_pipe_config] ips: 0 [ 135.218317] [drm:intel_dump_pipe_config] double wide: 0 [ 135.218320] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B [ 135.218322] [drm:i915_get_vblank_timestamp] crtc 1 is disabled [ 135.218323] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B [ 135.218326] [drm:intel_dump_pipe_config] [CRTC:13][setup_hw_state] config for pipe B [ 135.218327] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 135.218328] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 135.218331] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 135.218333] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 135.218334] [drm:intel_dump_pipe_config] requested mode: [ 135.218338] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 135.218339] [drm:intel_dump_pipe_config] adjusted mode: [ 135.218342] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 135.218345] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 135.218347] [drm:intel_dump_pipe_config] port clock: 0 [ 135.218348] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 135.218350] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 135.218352] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 135.218353] [drm:intel_dump_pipe_config] ips: 0 [ 135.218355] [drm:intel_dump_pipe_config] double wide: 0 [ 135.218358] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 135.218362] [drm:connected_sink_compute_bpp] [CONNECTOR:28:eDP-1] checking for sink bpp constrains [ 135.218364] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18 [ 135.218368] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 0a pixel clock 71000KHz [ 135.218370] [drm:intel_dp_compute_config] using min 1 lanes per VBT [ 135.218372] [drm:intel_dp_compute_config] using min 06 link bw per VBT [ 135.218374] [drm:intel_dp_compute_config] DP link bw 06 lane count 1 clock 162000 bpp 18 [ 135.218376] [drm:intel_dp_compute_config] DP link bw required 127800 available 129600 [ 135.218379] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1 [ 135.218381] [drm:intel_dump_pipe_config] [CRTC:8][modeset] config for pipe A [ 135.218382] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 135.218384] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 135.218386] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 135.218389] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 2068024, gmch_n: 2097152, link_m: 114890, link_n: 262144, tu: 64 [ 135.218390] [drm:intel_dump_pipe_config] requested mode: [ 135.218394] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 71000 1366 1404 1426 1482 768 771 777 798 0x48 0xa [ 135.218396] [drm:intel_dump_pipe_config] adjusted mode: [ 135.218400] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 71000 1366 1404 1426 1482 768 771 777 798 0x48 0xa [ 135.218403] [drm:intel_dump_crtc_timings] crtc timings: 71000 1366 1404 1426 1482 768 771 777 798, type: 0x48 flags: 0xa [ 135.218404] [drm:intel_dump_pipe_config] port clock: 162000 [ 135.218406] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 135.218408] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 135.218410] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 135.218411] [drm:intel_dump_pipe_config] ips: 0 [ 135.218413] [drm:intel_dump_pipe_config] double wide: 0 [ 135.278180] [drm:intel_display_power_put] disabling always-on [ 135.300201] [drm:i9xx_update_primary_plane] Writing base 00475000 00000000 0 0 5504 [ 135.318086] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 0 t8 0 t9 0 t10 0 t11_t12 4000 [ 135.318089] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 135.318091] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 500 [ 135.318093] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200 [ 135.318098] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f05 [ 135.342103] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 135.342105] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 135.342109] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000 [ 135.342110] [drm:wait_panel_status] Wait complete [ 135.342114] [drm:_edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 135.342115] [drm:_edp_panel_vdd_on] eDP was not running [ 135.515424] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 135.515504] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 135.520960] ata2.00: configured for UDMA/100 [ 135.557276] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 135.571289] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 135.571726] [drm:intel_dp_start_link_train] clock recovery OK [ 135.571728] [drm:intel_edp_panel_on] Turn eDP power on [ 135.571730] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 135.571734] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008 [ 135.571735] [drm:wait_panel_status] Wait complete [ 135.571738] [drm:wait_panel_on] Wait for panel power on [ 135.571741] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b [ 135.574374] usb 1-2: reset high-speed USB device number 7 using xhci_hcd [ 135.584348] ata1.00: configured for UDMA/133 [ 135.725547] [drm:wait_panel_status] Wait complete [ 135.725550] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 135.725554] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003 [ 135.749489] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880175540400 [ 135.749501] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880175540448 [ 135.749514] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880175540490 [ 135.749517] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801755404d8 [ 135.749520] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880175540520 [ 135.749962] asix 1-2:1.0 eth2: unregister 'asix' usb-0000:00:14.0-2, ASIX AX88772B USB 2.0 Ethernet [ 135.773452] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 135.773457] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 135.774701] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful [ 135.774895] [drm:g4x_check_srwm] SR watermark: display plane 56, cursor 2 [ 135.774897] [drm:g4x_check_srwm] SR watermark: display plane 109, cursor 2 [ 135.774900] [drm:valleyview_update_wm] Setting FIFO watermarks - A: plane=109, cursor=2, B: plane=2, cursor=2, SR: plane=56, cursor=2 [ 135.774903] [drm:intel_set_memory_cxsr] memory self-refresh is enabled [ 135.774909] [drm:intel_edp_backlight_on] [ 135.774911] [drm:intel_panel_enable_backlight] pipe A [ 135.774914] [drm:intel_panel_actually_set_backlight] set backlight PWM = 3906 [ 135.774927] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 135.842638] [drm:intel_connector_check_state] [CONNECTOR:28:eDP-1] [ 135.842644] [drm:check_encoder_state] [ENCODER:17:DAC-17] [ 135.842646] [drm:check_encoder_state] [ENCODER:18:TMDS-18] [ 135.842648] [drm:check_encoder_state] [ENCODER:23:TMDS-23] [ 135.842650] [drm:check_encoder_state] [ENCODER:25:TMDS-25] [ 135.842653] [drm:check_encoder_state] [ENCODER:27:TMDS-27] [ 135.842655] [drm:check_crtc_state] [CRTC:8] [ 135.844663] [drm:check_crtc_state] [CRTC:13] [ 135.868669] [drm:intel_dp_detect] [CONNECTOR:28:eDP-1] [ 135.869318] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 135.869482] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 135.892691] [drm:drm_helper_hpd_irq_event] [CONNECTOR:28:eDP-1] status updated from unknown to connected [ 135.892719] [drm:drm_fb_helper_hotplug_event] [ 135.892722] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:eDP-1] [ 135.895016] usb 1-4: reset high-speed USB device number 3 using xhci_hcd [ 135.916700] [drm:intel_dp_detect] [CONNECTOR:28:eDP-1] [ 135.917323] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 135.917486] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 135.964749] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 135.988825] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:eDP-1] probed modes : [ 135.988830] [drm:drm_mode_debug_printmodeline] Modeline 29:"1366x768" 60 71000 1366 1404 1426 1482 768 771 777 798 0x48 0xa [ 135.988833] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:16:VGA-1] [ 135.988835] [drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1 [ 135.996766] [drm:valleyview_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40000 [ 136.002775] [drm:valleyview_crt_detect_hotplug] valleyview hotplug adpa=0xf40000, result 0 [ 136.002777] [drm:intel_crt_detect] CRT not detected via hotplug [ 136.003063] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 136.003065] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 136.003067] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 136.003069] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 136.003346] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 136.003348] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 136.003350] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 136.010784] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:16:VGA-1] disconnected [ 136.010787] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-1] [ 136.010789] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-1] [ 136.035127] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 136.035130] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 136.058823] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-1] disconnected [ 136.058825] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:DP-1] [ 136.062912] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880079062d20 [ 136.082833] [drm:intel_dp_detect] [CONNECTOR:24:DP-1] [ 136.106850] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:DP-1] disconnected [ 136.106853] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-2] [ 136.106855] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2] [ 136.131145] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 136.154890] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-2] disconnected [ 136.154893] [drm:drm_setup_crtcs] [ 136.154896] [drm:drm_enable_connectors] connector 28 enabled? yes [ 136.154898] [drm:drm_enable_connectors] connector 16 enabled? no [ 136.154899] [drm:drm_enable_connectors] connector 19 enabled? no [ 136.154901] [drm:drm_enable_connectors] connector 24 enabled? no [ 136.154902] [drm:drm_enable_connectors] connector 26 enabled? no [ 136.154905] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 136.154907] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 [ 136.154910] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:8]: 1366x768 [ 136.154911] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping [ 136.154913] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 136.154914] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 136.154916] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 136.154918] [drm:drm_setup_crtcs] desired mode 1366x768 set on crtc 8 [ 136.154925] [drm:intel_crtc_set_config] [CRTC:8] [FB:35] #connectors=1 (x y) (0 0) [ 136.154929] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 136.154931] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8] [ 136.154935] [drm:intel_crtc_set_config] [CRTC:13] [NOFB] [ 136.154938] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0 [ 136.154940] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8] [ 136.156994] [drm:intel_crtc_set_config] [CRTC:8] [FB:35] #connectors=1 (x y) (0 0) [ 136.156998] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 136.157000] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8] [ 136.347349] usb 1-4.1: reset high-speed USB device number 4 using xhci_hcd [ 136.454302] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880175c07060 [ 136.504412] usb 1-4.2: reset high-speed USB device number 5 using xhci_hcd [ 136.588412] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801763fca00 [ 136.588415] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801763fca48 [ 136.588418] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801763fca90 [ 136.661874] usb 1-4.3: reset full-speed USB device number 6 using xhci_hcd [ 136.736495] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801763fcd00 [ 136.736499] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801763fcd90 [ 136.736502] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801763fcd48 [ 136.736504] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007901f4c8 [ 136.736507] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007901f480 [ 136.737741] PM: restore of devices complete after 1530.099 msecs [ 136.861500] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 136.863478] [drm:valleyview_enable_rps] GPLL enabled? yes [ 136.863483] [drm:valleyview_enable_rps] GPU status: 0x0000c0d0 [ 136.863488] [drm:valleyview_enable_rps] current GPU freq: 187 MHz (192) [ 136.863491] [drm:valleyview_enable_rps] setting GPU freq to 646 MHz (214) [ 136.863496] [drm:valleyview_set_rps] GPU freq request from 187 MHz (192) to 646 MHz (214) [ 137.043152] asix 1-2:1.0 eth0: register 'asix' at usb-0000:00:14.0-2, ASIX AX88772B USB 2.0 Ethernet, 00:24:8c:02:86:27 [ 137.043515] PM: Image restored successfully. [ 137.043546] PM: Basic memory bitmaps freed [ 137.043551] Restarting tasks ... done. [ 137.057651] systemd-udevd[4832]: renamed network interface eth0 to eth2 [ 138.278506] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 138.278516] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 141.869834] asix 1-2:1.0 eth2: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 142.544698] usb 1-2: USB disconnect, device number 7 [ 142.544997] asix 1-2:1.0 eth2: unregister 'asix' usb-0000:00:14.0-2, ASIX AX88772B USB 2.0 Ethernet [ 145.147611] usb 1-2: new high-speed USB device number 8 using xhci_hcd [ 145.330326] usb 1-2: New USB device found, idVendor=0b95, idProduct=772b [ 145.330349] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 145.330354] usb 1-2: Product: AX88772B [ 145.330359] usb 1-2: Manufacturer: ASIX Elec. Corp. [ 145.330363] usb 1-2: SerialNumber: 00001B [ 145.636478] asix 1-2:1.0 eth0: register 'asix' at usb-0000:00:14.0-2, ASIX AX88772B USB 2.0 Ethernet, 00:24:8c:02:86:27 [ 145.654584] systemd-udevd[4888]: renamed network interface eth0 to eth2 [ 148.099212] init: cups main process (4938) terminated with status 127 [ 148.099239] init: cups main process ended, respawning [ 150.068652] asix 1-2:1.0 eth2: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 178.243029] init: cups main process (5109) terminated with status 127 [ 178.243057] init: cups main process ended, respawning