[ 1058.077192] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00400000
[ 1058.077197] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 0
[ 1058.077249] [drm:i915_hotplug_work_func] running encoder hotplug functions
[ 1058.077253] [drm:i915_hotplug_work_func] Connector DP-1 (pin 5) received hotplug event.
[ 1058.077254] [drm:i915_hotplug_work_func] Connector HDMI-A-2 (pin 5) received hotplug event.
[ 1058.077294] usb 2-1: USB disconnect, device number 2
[ 1058.080434] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7015000c
[ 1058.089432] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7015000c
[ 1058.097495] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7015000c
[ 1058.102961] [drm:intel_dp_detect] [CONNECTOR:25:DP-1]
[ 1058.102968] [drm:intel_hpd_irq_event] [CONNECTOR:25:DP-1] status updated from connected to disconnected
[ 1058.105453] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7015000c
[ 1058.113485] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7015000c
[ 1058.121510] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7015000c
[ 1058.126991] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
[ 1058.127243] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 1058.127247] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[ 1058.127858] [drm:drm_mode_getconnector] [CONNECTOR:14:?]
[ 1058.127863] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:eDP-1]
[ 1058.127867] [drm:intel_dp_detect] [CONNECTOR:14:eDP-1]
[ 1058.127871] [drm:_edp_panel_vdd_on] Turning eDP VDD on
[ 1058.127877] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
[ 1058.128082] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
[ 1058.128248] [drm:intel_dp_probe_oui] Branch OUI: 000000
[ 1058.128264] [drm:drm_edid_to_eld] ELD: no CEA Extension found
[ 1058.128269] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:eDP-1] probed modes :
[ 1058.128272] [drm:drm_mode_debug_printmodeline] Modeline 15:"1920x1080" 60 141000 1920 1936 1952 2104 1080 1083 1097 1116 0x48 0x9
[ 1058.128279] [drm:drm_mode_getconnector] [CONNECTOR:14:?]
[ 1058.128426] [drm:drm_mode_getconnector] [CONNECTOR:23:?]
[ 1058.128429] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:HDMI-A-1]
[ 1058.128432] [drm:intel_hdmi_detect] [CONNECTOR:23:HDMI-A-1]
[ 1058.128597] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
[ 1058.128600] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[ 1058.128603] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:HDMI-A-1] disconnected
[ 1058.128618] [drm:drm_mode_getconnector] [CONNECTOR:25:?]
[ 1058.128620] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:25:DP-1]
[ 1058.128624] [drm:intel_dp_detect] [CONNECTOR:25:DP-1]
[ 1058.128627] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:25:DP-1] disconnected
[ 1058.128640] [drm:intel_dp_detect] [CONNECTOR:25:DP-1]
[ 1058.128692] [drm:intel_hdmi_detect] [CONNECTOR:23:HDMI-A-1]
[ 1058.128857] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
[ 1058.128860] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[ 1058.128870] [drm:drm_mode_getconnector] [CONNECTOR:26:?]
[ 1058.128873] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:26:HDMI-A-2]
[ 1058.128874] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
[ 1058.129039] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 1058.129041] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[ 1058.129042] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:26:HDMI-A-2] disconnected
[ 1058.129050] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
[ 1058.129208] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 1058.129211] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[ 1058.129244] [drm:intel_dp_detect] [CONNECTOR:14:eDP-1]
[ 1058.129428] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
[ 1058.129613] [drm:intel_dp_probe_oui] Branch OUI: 000000
[ 1058.191241] [drm:drm_mode_setcrtc] [CRTC:5]
[ 1058.191246] [drm:intel_crtc_set_config] [CRTC:5] [NOFB]
[ 1058.191249] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=0
[ 1058.191251] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [NOCRTC]
[ 1058.191252] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
[ 1058.191253] [drm:intel_modeset_stage_output_state] [CONNECTOR:25:DP-1] to [CRTC:8]
[ 1058.191254] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
[ 1058.191256] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch
[ 1058.191258] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 1
[ 1058.203055] usb 2-6: USB disconnect, device number 4
[ 1058.203057] usb 2-6.1: USB disconnect, device number 5
[ 1058.227100] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
[ 1058.227106] [drm:intel_edp_backlight_off] 
[ 1058.243288] [drm:intel_edp_panel_off] Turn eDP power off
[ 1058.276389] usb 2-6.2: USB disconnect, device number 6
[ 1058.291275] [drm:asle_set_backlight] bclp = 0x80000029
[ 1058.431150] [drm:wait_panel_off] Wait for panel power off time
[ 1058.431155] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
[ 1058.483215] [drm:wait_panel_status] Wait complete
[ 1058.483239] [drm:intel_update_fbc] disabled per chip default
[ 1058.483251] [drm:intel_connector_check_state] [CONNECTOR:25:DP-1]
[ 1058.483254] [drm:check_encoder_state] [ENCODER:13:TMDS-13]
[ 1058.483256] [drm:check_encoder_state] [ENCODER:22:TMDS-22]
[ 1058.483257] [drm:check_encoder_state] [ENCODER:24:TMDS-24]
[ 1058.483270] [drm:check_crtc_state] [CRTC:5]
[ 1058.483272] [drm:check_crtc_state] [CRTC:8]
[ 1058.483278] [drm:check_crtc_state] [CRTC:11]
[ 1058.483293] [drm:asle_set_backlight] updating opregion backlight 41/255
[ 1058.495758] [drm:drm_mode_setcrtc] [CRTC:8]
[ 1058.495762] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
[ 1058.495765] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=1, fb_changed=0
[ 1058.495766] [drm:intel_modeset_stage_output_state] [CONNECTOR:25:DP-1] to [NOCRTC]
[ 1058.495767] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
[ 1058.495768] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
[ 1058.495769] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch
[ 1058.495771] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 2
[ 1058.537869] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7015000c
[ 1058.537877] [drm:intel_dp_sink_dpms] failed to write sink power state
[ 1058.537898] [drm:intel_update_fbc] no output, disabling
[ 1058.537905] [drm:intel_display_power_put] disabling always-on
[ 1058.537911] [drm:check_encoder_state] [ENCODER:13:TMDS-13]
[ 1058.537913] [drm:check_encoder_state] [ENCODER:22:TMDS-22]
[ 1058.537915] [drm:check_encoder_state] [ENCODER:24:TMDS-24]
[ 1058.537917] [drm:check_crtc_state] [CRTC:5]
[ 1058.537919] [drm:check_crtc_state] [CRTC:8]
[ 1058.537921] [drm:check_crtc_state] [CRTC:11]
[ 1058.547363] [drm:drm_mode_addfb] [FB:16]
[ 1058.547391] [drm:drm_mode_setcrtc] [CRTC:5]
[ 1058.547395] [drm:drm_mode_setcrtc] [CONNECTOR:14:eDP-1]
[ 1058.547396] [drm:intel_crtc_set_config] [CRTC:5] [FB:16] #connectors=1 (x y) (0 0)
[ 1058.547399] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set
[ 1058.547400] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=1
[ 1058.547401] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
[ 1058.547403] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
[ 1058.547404] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
[ 1058.547405] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch
[ 1058.547407] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[ 1058.547421] [drm:connected_sink_compute_bpp] [CONNECTOR:14:eDP-1] checking for sink bpp constrains
[ 1058.547422] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18
[ 1058.547425] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 141000KHz
[ 1058.547426] [drm:intel_dp_compute_config] using min 2 lanes per VBT
[ 1058.547427] [drm:intel_dp_compute_config] using min 0a link bw per VBT
[ 1058.547428] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 18
[ 1058.547429] [drm:intel_dp_compute_config] DP link bw required 253800 available 432000
[ 1058.547431] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1
[ 1058.547433] [drm:intel_dump_pipe_config] [CRTC:5][modeset] config for pipe A
[ 1058.547434] [drm:intel_dump_pipe_config] cpu_transcoder: D
[ 1058.547435] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
[ 1058.547436] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1058.547437] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4928307, gmch_n: 8388608, link_m: 273794, link_n: 524288, tu: 64
[ 1058.547438] [drm:intel_dump_pipe_config] requested mode:
[ 1058.547440] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 141000 1920 1936 1952 2104 1080 1083 1097 1116 0x0 0x9
[ 1058.547441] [drm:intel_dump_pipe_config] adjusted mode:
[ 1058.547443] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 141000 1920 1936 1952 2104 1080 1083 1097 1116 0x48 0x9
[ 1058.547445] [drm:intel_dump_crtc_timings] crtc timings: 141000 1920 1936 1952 2104 1080 1083 1097 1116, type: 0x48 flags: 0x9
[ 1058.547446] [drm:intel_dump_pipe_config] port clock: 270000
[ 1058.547446] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
[ 1058.547448] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 1058.547460] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1058.547461] [drm:intel_dump_pipe_config] ips: 1
[ 1058.547462] [drm:intel_dump_pipe_config] double wide: 0
[ 1058.547465] [drm:intel_display_power_get] enabling always-on
[ 1058.553713] [drm:ironlake_update_primary_plane] Writing base 0F4F2000 00000000 0 0 7680
[ 1058.553718] [drm:intel_edp_psr_match_conditions] PSR disable by flag
[ 1058.553721] [drm:intel_crtc_mode_set] [ENCODER:13:TMDS-13] set [MODE:0:]
[ 1058.553722] [drm:intel_ddi_mode_set] Preparing DDI mode on port A, pipe A
[ 1058.553724] [drm:intel_edp_panel_on] Turn eDP power on
[ 1058.553727] [drm:wait_panel_power_cycle] Wait for panel power cycle
[ 1058.739939] pci_bus 0000:01: Allocating resources
[ 1058.739961] pcieport 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[ 1058.739963] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 1058.739965] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[ 1058.739969] pci_bus 0000:02: Allocating resources
[ 1058.739980] pcieport 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[ 1058.739981] pcieport 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 1058.739986] pci_bus 0000:03: Allocating resources
[ 1058.740006] pcieport 0000:00:1c.4: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[ 1058.740008] pcieport 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 1058.740011] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1058.740015] pcieport 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 1058.740017] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 1058.740018] pcieport 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 1058.740019] pcieport 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 1058.740021] pcieport 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[ 1058.740022] pcieport 0000:00:1c.3: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[ 1058.740023] pcieport 0000:00:1c.4: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[ 1058.740040] pcieport 0000:00:1c.0: BAR 14: assigned [mem 0xdf200000-0xdf3fffff]
[ 1058.740045] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xdf400000-0xdf5fffff 64bit pref]
[ 1058.740050] pcieport 0000:00:1c.3: BAR 15: assigned [mem 0xdf600000-0xdf7fffff 64bit pref]
[ 1058.740054] pcieport 0000:00:1c.4: BAR 15: assigned [mem 0xdf800000-0xdf9fffff 64bit pref]
[ 1058.740058] pcieport 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[ 1058.740060] pcieport 0000:00:1c.3: BAR 13: assigned [io  0x3000-0x3fff]
[ 1058.740061] pcieport 0000:00:1c.4: BAR 13: assigned [io  0x4000-0x4fff]
[ 1058.740068] pci 0000:00:00.0: no hotplug settings from platform
[ 1058.740081] pci 0000:00:00.0: using default PCI settings
[ 1058.740085] i915 0000:00:02.0: no hotplug settings from platform
[ 1058.740086] i915 0000:00:02.0: using default PCI settings
[ 1058.740090] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[ 1058.740093] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[ 1058.740094] xhci_hcd 0000:00:14.0: using default PCI settings
[ 1058.740100] mei_me 0000:00:16.0: no hotplug settings from platform
[ 1058.740101] mei_me 0000:00:16.0: using default PCI settings
[ 1058.740107] serial 0000:00:16.3: no hotplug settings from platform
[ 1058.740108] serial 0000:00:16.3: using default PCI settings
[ 1058.740126] e1000e 0000:00:19.0: no hotplug settings from platform
[ 1058.740127] e1000e 0000:00:19.0: using default PCI settings
[ 1058.740132] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[ 1058.740134] pcieport 0000:00:1c.0: no hotplug settings from platform
[ 1058.740137] pcieport 0000:00:1c.3: no hotplug settings from platform
[ 1058.740143] iwlwifi 0000:02:00.0: no hotplug settings from platform
[ 1058.740146] pcieport 0000:00:1c.4: no hotplug settings from platform
[ 1058.740163] sdhci-pci 0000:03:00.0: no hotplug settings from platform
[ 1058.740165] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[ 1058.740166] ehci-pci 0000:00:1d.0: using default PCI settings
[ 1058.740173] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[ 1058.740174] lpc_ich 0000:00:1f.0: using default PCI settings
[ 1058.740182] ahci 0000:00:1f.2: no hotplug settings from platform
[ 1058.740183] ahci 0000:00:1f.2: using default PCI settings
[ 1058.740188] pci 0000:00:1f.3: no hotplug settings from platform
[ 1058.740189] pci 0000:00:1f.3: using default PCI settings
[ 1058.740581] ACPI: Error installing CMOS-RTC region handler
[ 1058.767626] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1058.767652] pci 0000:00:00.0: no hotplug settings from platform
[ 1058.767653] pci 0000:00:00.0: using default PCI settings
[ 1058.767658] i915 0000:00:02.0: no hotplug settings from platform
[ 1058.767659] i915 0000:00:02.0: using default PCI settings
[ 1058.767663] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[ 1058.767666] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[ 1058.767667] xhci_hcd 0000:00:14.0: using default PCI settings
[ 1058.767685] mei_me 0000:00:16.0: no hotplug settings from platform
[ 1058.767686] mei_me 0000:00:16.0: using default PCI settings
[ 1058.767692] serial 0000:00:16.3: no hotplug settings from platform
[ 1058.767693] serial 0000:00:16.3: using default PCI settings
[ 1058.767699] e1000e 0000:00:19.0: no hotplug settings from platform
[ 1058.767700] e1000e 0000:00:19.0: using default PCI settings
[ 1058.767705] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[ 1058.767708] pcieport 0000:00:1c.0: no hotplug settings from platform
[ 1058.767710] pcieport 0000:00:1c.3: no hotplug settings from platform
[ 1058.767730] iwlwifi 0000:02:00.0: no hotplug settings from platform
[ 1058.767733] pcieport 0000:00:1c.4: no hotplug settings from platform
[ 1058.767739] sdhci-pci 0000:03:00.0: no hotplug settings from platform
[ 1058.767742] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[ 1058.767743] ehci-pci 0000:00:1d.0: using default PCI settings
[ 1058.767749] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[ 1058.767750] lpc_ich 0000:00:1f.0: using default PCI settings
[ 1058.767769] ahci 0000:00:1f.2: no hotplug settings from platform
[ 1058.767771] ahci 0000:00:1f.2: using default PCI settings
[ 1058.767775] pci 0000:00:1f.3: no hotplug settings from platform
[ 1058.767777] pci 0000:00:1f.3: using default PCI settings
[ 1058.767815] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1058.767820] pci 0000:00:00.0: no hotplug settings from platform
[ 1058.767821] pci 0000:00:00.0: using default PCI settings
[ 1058.767824] i915 0000:00:02.0: no hotplug settings from platform
[ 1058.767825] i915 0000:00:02.0: using default PCI settings
[ 1058.767829] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[ 1058.767831] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[ 1058.767832] xhci_hcd 0000:00:14.0: using default PCI settings
[ 1058.767850] mei_me 0000:00:16.0: no hotplug settings from platform
[ 1058.767851] mei_me 0000:00:16.0: using default PCI settings
[ 1058.767857] serial 0000:00:16.3: no hotplug settings from platform
[ 1058.767858] serial 0000:00:16.3: using default PCI settings
[ 1058.767864] e1000e 0000:00:19.0: no hotplug settings from platform
[ 1058.767865] e1000e 0000:00:19.0: using default PCI settings
[ 1058.767870] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[ 1058.767872] pcieport 0000:00:1c.0: no hotplug settings from platform
[ 1058.767874] pcieport 0000:00:1c.3: no hotplug settings from platform
[ 1058.767892] iwlwifi 0000:02:00.0: no hotplug settings from platform
[ 1058.767894] pcieport 0000:00:1c.4: no hotplug settings from platform
[ 1058.767899] sdhci-pci 0000:03:00.0: no hotplug settings from platform
[ 1058.767902] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[ 1058.767903] ehci-pci 0000:00:1d.0: using default PCI settings
[ 1058.767909] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[ 1058.767910] lpc_ich 0000:00:1f.0: using default PCI settings
[ 1058.767917] ahci 0000:00:1f.2: no hotplug settings from platform
[ 1058.767930] ahci 0000:00:1f.2: using default PCI settings
[ 1058.767935] pci 0000:00:1f.3: no hotplug settings from platform
[ 1058.767936] pci 0000:00:1f.3: using default PCI settings
[ 1058.767991] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1058.767994] pci 0000:00:00.0: no hotplug settings from platform
[ 1058.767995] pci 0000:00:00.0: using default PCI settings
[ 1058.767999] i915 0000:00:02.0: no hotplug settings from platform
[ 1058.768000] i915 0000:00:02.0: using default PCI settings
[ 1058.768015] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[ 1058.768018] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[ 1058.768019] xhci_hcd 0000:00:14.0: using default PCI settings
[ 1058.768025] mei_me 0000:00:16.0: no hotplug settings from platform
[ 1058.768026] mei_me 0000:00:16.0: using default PCI settings
[ 1058.768031] serial 0000:00:16.3: no hotplug settings from platform
[ 1058.768032] serial 0000:00:16.3: using default PCI settings
[ 1058.768038] e1000e 0000:00:19.0: no hotplug settings from platform
[ 1058.768039] e1000e 0000:00:19.0: using default PCI settings
[ 1058.768055] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[ 1058.768058] pcieport 0000:00:1c.0: no hotplug settings from platform
[ 1058.768060] pcieport 0000:00:1c.3: no hotplug settings from platform
[ 1058.768066] iwlwifi 0000:02:00.0: no hotplug settings from platform
[ 1058.768068] pcieport 0000:00:1c.4: no hotplug settings from platform
[ 1058.768073] sdhci-pci 0000:03:00.0: no hotplug settings from platform
[ 1058.768076] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[ 1058.768077] ehci-pci 0000:00:1d.0: using default PCI settings
[ 1058.768095] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[ 1058.768096] lpc_ich 0000:00:1f.0: using default PCI settings
[ 1058.768103] ahci 0000:00:1f.2: no hotplug settings from platform
[ 1058.768104] ahci 0000:00:1f.2: using default PCI settings
[ 1058.768109] pci 0000:00:1f.3: no hotplug settings from platform
[ 1058.768110] pci 0000:00:1f.3: using default PCI settings
[ 1058.768389] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1058.768393] pci 0000:00:00.0: no hotplug settings from platform
[ 1058.768394] pci 0000:00:00.0: using default PCI settings
[ 1058.768398] i915 0000:00:02.0: no hotplug settings from platform
[ 1058.768399] i915 0000:00:02.0: using default PCI settings
[ 1058.768403] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[ 1058.768405] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[ 1058.768406] xhci_hcd 0000:00:14.0: using default PCI settings
[ 1058.768412] mei_me 0000:00:16.0: no hotplug settings from platform
[ 1058.768413] mei_me 0000:00:16.0: using default PCI settings
[ 1058.768430] serial 0000:00:16.3: no hotplug settings from platform
[ 1058.768431] serial 0000:00:16.3: using default PCI settings
[ 1058.768437] e1000e 0000:00:19.0: no hotplug settings from platform
[ 1058.768438] e1000e 0000:00:19.0: using default PCI settings
[ 1058.768443] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[ 1058.768445] pcieport 0000:00:1c.0: no hotplug settings from platform
[ 1058.768448] pcieport 0000:00:1c.3: no hotplug settings from platform
[ 1058.768454] iwlwifi 0000:02:00.0: no hotplug settings from platform
[ 1058.768468] pcieport 0000:00:1c.4: no hotplug settings from platform
[ 1058.768473] sdhci-pci 0000:03:00.0: no hotplug settings from platform
[ 1058.768475] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[ 1058.768476] ehci-pci 0000:00:1d.0: using default PCI settings
[ 1058.768482] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[ 1058.768483] lpc_ich 0000:00:1f.0: using default PCI settings
[ 1058.768491] ahci 0000:00:1f.2: no hotplug settings from platform
[ 1058.768492] ahci 0000:00:1f.2: using default PCI settings
[ 1058.768508] pci 0000:00:1f.3: no hotplug settings from platform
[ 1058.768509] pci 0000:00:1f.3: using default PCI settings
[ 1058.768522] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1058.768525] pci 0000:00:00.0: no hotplug settings from platform
[ 1058.768526] pci 0000:00:00.0: using default PCI settings
[ 1058.768530] i915 0000:00:02.0: no hotplug settings from platform
[ 1058.768531] i915 0000:00:02.0: using default PCI settings
[ 1058.768535] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[ 1058.768549] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[ 1058.768550] xhci_hcd 0000:00:14.0: using default PCI settings
[ 1058.768556] mei_me 0000:00:16.0: no hotplug settings from platform
[ 1058.768557] mei_me 0000:00:16.0: using default PCI settings
[ 1058.768562] serial 0000:00:16.3: no hotplug settings from platform
[ 1058.768563] serial 0000:00:16.3: using default PCI settings
[ 1058.768569] e1000e 0000:00:19.0: no hotplug settings from platform
[ 1058.768570] e1000e 0000:00:19.0: using default PCI settings
[ 1058.768575] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[ 1058.768577] pcieport 0000:00:1c.0: no hotplug settings from platform
[ 1058.768591] pcieport 0000:00:1c.3: no hotplug settings from platform
[ 1058.768597] iwlwifi 0000:02:00.0: no hotplug settings from platform
[ 1058.768599] pcieport 0000:00:1c.4: no hotplug settings from platform
[ 1058.768605] sdhci-pci 0000:03:00.0: no hotplug settings from platform
[ 1058.768607] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[ 1058.768608] ehci-pci 0000:00:1d.0: using default PCI settings
[ 1058.768614] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[ 1058.768615] lpc_ich 0000:00:1f.0: using default PCI settings
[ 1058.768634] ahci 0000:00:1f.2: no hotplug settings from platform
[ 1058.768635] ahci 0000:00:1f.2: using default PCI settings
[ 1058.768640] pci 0000:00:1f.3: no hotplug settings from platform
[ 1058.768641] pci 0000:00:1f.3: using default PCI settings
[ 1058.768697] acpi MSFT1111:00: Cannot transition to power state D3cold for parent in (unknown)
[ 1058.768699] acpi INT33C2:00: Cannot transition to non-D0 state from D3
[ 1058.768700] acpi MSFT0002:00: Cannot transition to power state D3cold for parent in (unknown)
[ 1058.768713] acpi ELAN1010:00: Cannot transition to power state D3cold for parent in (unknown)
[ 1058.768715] acpi INT33C3:00: Cannot transition to non-D0 state from D3
[ 1058.768717] acpi INT33C0:00: Cannot transition to non-D0 state from D3
[ 1058.768718] acpi INT33C1:00: Cannot transition to non-D0 state from D3
[ 1058.768719] acpi INT33C4:00: Cannot transition to non-D0 state from D3
[ 1058.768720] acpi INT33C5:00: Cannot transition to non-D0 state from D3
[ 1058.768728] acpi device:40: Cannot transition to power state D3cold for parent in (unknown)
[ 1058.768729] acpi INT33C6:00: Cannot transition to non-D0 state from D3
[ 1058.768865] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1058.768882] i915 0000:00:02.0: no hotplug settings from platform
[ 1058.768883] i915 0000:00:02.0: using default PCI settings
[ 1058.768886] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[ 1058.768889] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[ 1058.768890] xhci_hcd 0000:00:14.0: using default PCI settings
[ 1058.768896] mei_me 0000:00:16.0: no hotplug settings from platform
[ 1058.768897] mei_me 0000:00:16.0: using default PCI settings
[ 1058.768902] serial 0000:00:16.3: no hotplug settings from platform
[ 1058.768903] serial 0000:00:16.3: using default PCI settings
[ 1058.768921] e1000e 0000:00:19.0: no hotplug settings from platform
[ 1058.768922] e1000e 0000:00:19.0: using default PCI settings
[ 1058.768927] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[ 1058.768929] pcieport 0000:00:1c.0: no hotplug settings from platform
[ 1058.768931] pcieport 0000:00:1c.3: no hotplug settings from platform
[ 1058.768938] iwlwifi 0000:02:00.0: no hotplug settings from platform
[ 1058.768940] pcieport 0000:00:1c.4: no hotplug settings from platform
[ 1058.768945] sdhci-pci 0000:03:00.0: no hotplug settings from platform
[ 1058.768947] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[ 1058.768960] ehci-pci 0000:00:1d.0: using default PCI settings
[ 1058.768966] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[ 1058.768967] lpc_ich 0000:00:1f.0: using default PCI settings
[ 1058.768975] ahci 0000:00:1f.2: no hotplug settings from platform
[ 1058.768976] ahci 0000:00:1f.2: using default PCI settings
[ 1058.768980] pci 0000:00:1f.3: no hotplug settings from platform
[ 1058.768981] pci 0000:00:1f.3: using default PCI settings
[ 1058.769102] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1058.769106] i915 0000:00:02.0: no hotplug settings from platform
[ 1058.769107] i915 0000:00:02.0: using default PCI settings
[ 1058.769111] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[ 1058.769124] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[ 1058.769126] xhci_hcd 0000:00:14.0: using default PCI settings
[ 1058.769132] mei_me 0000:00:16.0: no hotplug settings from platform
[ 1058.769133] mei_me 0000:00:16.0: using default PCI settings
[ 1058.769138] serial 0000:00:16.3: no hotplug settings from platform
[ 1058.769139] serial 0000:00:16.3: using default PCI settings
[ 1058.769145] e1000e 0000:00:19.0: no hotplug settings from platform
[ 1058.769146] e1000e 0000:00:19.0: using default PCI settings
[ 1058.769151] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[ 1058.769154] pcieport 0000:00:1c.0: no hotplug settings from platform
[ 1058.769167] pcieport 0000:00:1c.3: no hotplug settings from platform
[ 1058.769173] iwlwifi 0000:02:00.0: no hotplug settings from platform
[ 1058.769175] pcieport 0000:00:1c.4: no hotplug settings from platform
[ 1058.769181] sdhci-pci 0000:03:00.0: no hotplug settings from platform
[ 1058.769183] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[ 1058.769184] ehci-pci 0000:00:1d.0: using default PCI settings
[ 1058.769190] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[ 1058.769191] lpc_ich 0000:00:1f.0: using default PCI settings
[ 1058.769210] ahci 0000:00:1f.2: no hotplug settings from platform
[ 1058.769211] ahci 0000:00:1f.2: using default PCI settings
[ 1058.769216] pci 0000:00:1f.3: no hotplug settings from platform
[ 1058.769217] pci 0000:00:1f.3: using default PCI settings
[ 1059.035571] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000
[ 1059.035586] [drm:wait_panel_status] Wait complete
[ 1059.035590] [drm:wait_panel_on] Wait for panel power on
[ 1059.035593] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003
[ 1059.243714] [drm:wait_panel_status] Wait complete
[ 1059.243721] [drm:_edp_panel_vdd_on] Turning eDP VDD on
[ 1059.243727] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
[ 1059.244865] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
[ 1059.245329] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
[ 1059.245781] [drm:intel_dp_start_link_train] clock recovery OK
[ 1059.246523] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
[ 1059.246843] [drm:intel_edp_backlight_on] 
[ 1059.251636] [drm:intel_panel_enable_backlight] pipe A
[ 1059.251652] [drm:intel_panel_actually_set_backlight] set backlight PWM = 150
[ 1059.251657] [drm:intel_edp_psr_match_conditions] PSR disable by flag
[ 1059.283743] [drm:intel_update_fbc] disabled per chip default
[ 1059.283753] [drm:intel_connector_check_state] [CONNECTOR:14:eDP-1]
[ 1059.283756] [drm:check_encoder_state] [ENCODER:13:TMDS-13]
[ 1059.283758] [drm:check_encoder_state] [ENCODER:22:TMDS-22]
[ 1059.283759] [drm:check_encoder_state] [ENCODER:24:TMDS-24]
[ 1059.283761] [drm:check_crtc_state] [CRTC:5]
[ 1059.283779] [drm:check_crtc_state] [CRTC:8]
[ 1059.283781] [drm:check_crtc_state] [CRTC:11]
[ 1059.315955] [drm:intel_crtc_cursor_set] cursor off
[ 1059.372359] [drm:intel_display_power_put] disabling display
[ 1059.372365] [drm:hsw_set_power_well] Requesting to disable the power well
[ 1059.460309] [drm:asle_set_backlight] bclp = 0x80000029
[ 1059.460314] [drm:asle_set_backlight] updating opregion backlight 41/255
[ 1059.460318] [drm:intel_panel_actually_set_backlight] set backlight PWM = 150
[ 1061.138495] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off
[ 1061.138503] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
[ 1061.192871] usb 2-6: new high-speed USB device number 7 using xhci_hcd
[ 1061.193141] atkbd_interrupt: 123 callbacks suppressed
[ 1061.193144] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 1061.290737] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00400000
[ 1061.290750] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 0
[ 1061.290777] [drm:i915_hotplug_work_func] running encoder hotplug functions
[ 1061.290782] [drm:i915_hotplug_work_func] Connector DP-1 (pin 5) received hotplug event.
[ 1061.290791] [drm:i915_hotplug_work_func] Connector HDMI-A-2 (pin 5) received hotplug event.
[ 1061.290799] [drm:intel_dp_detect] [CONNECTOR:25:DP-1]
[ 1061.291100] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 01 00 15 01 83 02 00 00 00 00 00 04
[ 1061.291102] [drm:intel_dp_get_dpcd] Displayport TPS3 supported
[ 1061.291791] [drm:intel_dp_probe_oui] Sink OUI: 000000
[ 1061.291982] [drm:intel_dp_probe_oui] Branch OUI: 90cc24
[ 1061.314271] [drm:intel_hpd_irq_event] [CONNECTOR:25:DP-1] status updated from disconnected to connected
[ 1061.314275] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
[ 1061.314433] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 1061.314435] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[ 1061.315108] [drm:drm_mode_getconnector] [CONNECTOR:14:?]
[ 1061.315112] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:eDP-1]
[ 1061.315114] [drm:intel_dp_detect] [CONNECTOR:14:eDP-1]
[ 1061.315117] [drm:_edp_panel_vdd_on] Turning eDP VDD on
[ 1061.315123] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
[ 1061.315309] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
[ 1061.315479] [drm:intel_dp_probe_oui] Branch OUI: 000000
[ 1061.315494] [drm:drm_edid_to_eld] ELD: no CEA Extension found
[ 1061.315504] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:14:eDP-1] probed modes :
[ 1061.315508] [drm:drm_mode_debug_printmodeline] Modeline 15:"1920x1080" 60 141000 1920 1936 1952 2104 1080 1083 1097 1116 0x48 0x9
[ 1061.315515] [drm:drm_mode_getconnector] [CONNECTOR:14:?]
[ 1061.315517] [drm:intel_dp_detect] [CONNECTOR:25:DP-1]
[ 1061.315809] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 01 00 15 01 83 02 00 00 00 00 00 04
[ 1061.315812] [drm:intel_dp_get_dpcd] Displayport TPS3 supported
[ 1061.316686] [drm:intel_dp_probe_oui] Sink OUI: 000000
[ 1061.316878] [drm:intel_dp_probe_oui] Branch OUI: 90cc24
[ 1061.321012] usb 2-6: New USB device found, idVendor=413c, idProduct=2513
[ 1061.321015] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1061.321356] hub 2-6:1.0: USB hub found
[ 1061.321389] hub 2-6:1.0: 3 ports detected
[ 1061.344247] [drm:intel_hdmi_detect] [CONNECTOR:23:HDMI-A-1]
[ 1061.344329] [drm:drm_mode_getconnector] [CONNECTOR:23:?]
[ 1061.344403] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
[ 1061.344405] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[ 1061.344411] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:HDMI-A-1]
[ 1061.344413] [drm:intel_hdmi_detect] [CONNECTOR:23:HDMI-A-1]
[ 1061.344564] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
[ 1061.344565] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[ 1061.344567] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:23:HDMI-A-1] disconnected
[ 1061.344572] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
[ 1061.344573] [drm:drm_mode_getconnector] [CONNECTOR:25:?]
[ 1061.344729] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 1061.344731] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[ 1061.344735] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:25:DP-1]
[ 1061.344738] [drm:intel_dp_detect] [CONNECTOR:25:DP-1]
[ 1061.345029] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 01 00 15 01 83 02 00 00 00 00 00 04
[ 1061.345031] [drm:intel_dp_get_dpcd] Displayport TPS3 supported
[ 1061.345699] [drm:intel_dp_probe_oui] Sink OUI: 000000
[ 1061.345882] [drm:intel_dp_probe_oui] Branch OUI: 90cc24
[ 1061.389044] [drm:drm_edid_to_eld] ELD: no CEA Extension found
[ 1061.389058] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:25:DP-1] probed modes :
[ 1061.389061] [drm:drm_mode_debug_printmodeline] Modeline 29:"1920x1200" 60 151200 1920 1928 1992 2056 1200 1202 1206 1234 0x48 0x5
[ 1061.389064] [drm:drm_mode_debug_printmodeline] Modeline 30:"1920x1080" 60 137700 1920 1928 1992 2056 1080 1082 1086 1112 0x40 0x5
[ 1061.389067] [drm:drm_mode_debug_printmodeline] Modeline 32:"1600x1200" 60 132300 1600 1608 1672 1776 1200 1205 1215 1239 0x40 0x5
[ 1061.389070] [drm:drm_mode_debug_printmodeline] Modeline 33:"1280x1024" 76 141813 1280 1376 1512 1744 1024 1025 1028 1070 0x0 0x6
[ 1061.389072] [drm:drm_mode_debug_printmodeline] Modeline 43:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 1061.389075] [drm:drm_mode_debug_printmodeline] Modeline 31:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0xa
[ 1061.389078] [drm:drm_mode_debug_printmodeline] Modeline 34:"1152x921" 66 97009 1152 1224 1344 1536 921 922 925 957 0x0 0x6
[ 1061.389080] [drm:drm_mode_debug_printmodeline] Modeline 54:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 1061.389083] [drm:drm_mode_debug_printmodeline] Modeline 44:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 1061.389086] [drm:drm_mode_debug_printmodeline] Modeline 35:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 1061.389088] [drm:drm_mode_debug_printmodeline] Modeline 45:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[ 1061.389091] [drm:drm_mode_debug_printmodeline] Modeline 46:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 1061.389093] [drm:drm_mode_debug_printmodeline] Modeline 47:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[ 1061.389096] [drm:drm_mode_debug_printmodeline] Modeline 48:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 1061.389099] [drm:drm_mode_debug_printmodeline] Modeline 49:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[ 1061.389101] [drm:drm_mode_debug_printmodeline] Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 1061.389104] [drm:drm_mode_debug_printmodeline] Modeline 37:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 1061.389106] [drm:drm_mode_debug_printmodeline] Modeline 38:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 1061.389109] [drm:drm_mode_debug_printmodeline] Modeline 39:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[ 1061.389111] [drm:drm_mode_debug_printmodeline] Modeline 40:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[ 1061.389114] [drm:drm_mode_debug_printmodeline] Modeline 41:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 1061.389116] [drm:drm_mode_debug_printmodeline] Modeline 42:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 1061.389124] [drm:drm_mode_getconnector] [CONNECTOR:25:?]
[ 1061.389125] [drm:intel_dp_detect] [CONNECTOR:14:eDP-1]
[ 1061.389287] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
[ 1061.389446] [drm:intel_dp_probe_oui] Branch OUI: 000000
[ 1061.389491] [drm:drm_mode_getconnector] [CONNECTOR:26:?]
[ 1061.389494] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:26:HDMI-A-2]
[ 1061.389495] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
[ 1061.389684] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 1061.389685] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[ 1061.389686] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:26:HDMI-A-2] disconnected
[ 1061.395417] [drm:intel_crtc_cursor_set] cursor off
[ 1061.396164] [drm:drm_mode_setcrtc] [CRTC:5]
[ 1061.396168] [drm:drm_mode_setcrtc] [CONNECTOR:14:eDP-1]
[ 1061.396170] [drm:intel_crtc_set_config] [CRTC:5] [FB:53] #connectors=1 (x y) (0 0)
[ 1061.396173] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=1
[ 1061.396174] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
[ 1061.400743] [drm:ironlake_update_primary_plane] Writing base 03DD7000 00000000 0 0 15360
[ 1061.420992] [drm:intel_edp_psr_match_conditions] PSR disable by flag
[ 1061.425615] [drm:drm_mode_setcrtc] [CRTC:8]
[ 1061.425627] [drm:drm_mode_setcrtc] [CONNECTOR:25:DP-1]
[ 1061.425630] [drm:intel_crtc_set_config] [CRTC:8] [FB:53] #connectors=1 (x y) (0 0)
[ 1061.425635] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set
[ 1061.425637] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=1, fb_changed=0
[ 1061.425640] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
[ 1061.425642] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
[ 1061.425644] [drm:intel_modeset_stage_output_state] [CONNECTOR:25:DP-1] to [CRTC:8]
[ 1061.425645] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
[ 1061.425647] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch
[ 1061.425651] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0
[ 1061.425654] [drm:connected_sink_compute_bpp] [CONNECTOR:25:DP-1] checking for sink bpp constrains
[ 1061.425658] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 14 pixel clock 151200KHz
[ 1061.425666] [drm:intel_dp_compute_config] DP link bw 06 lane count 4 clock 162000 bpp 24
[ 1061.425668] [drm:intel_dp_compute_config] DP link bw required 362880 available 518400
[ 1061.425671] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
[ 1061.425673] [drm:intel_dump_pipe_config] [CRTC:8][modeset] config for pipe B
[ 1061.425674] [drm:intel_dump_pipe_config] cpu_transcoder: B
[ 1061.425676] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[ 1061.425677] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1061.425679] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 5872025, gmch_n: 8388608, link_m: 244667, link_n: 262144, tu: 64
[ 1061.425680] [drm:intel_dump_pipe_config] requested mode:
[ 1061.425683] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 151200 1920 1928 1992 2056 1200 1202 1206 1234 0x0 0x5
[ 1061.425685] [drm:intel_dump_pipe_config] adjusted mode:
[ 1061.425687] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 151200 1920 1928 1992 2056 1200 1202 1206 1234 0x0 0x5
[ 1061.425690] [drm:intel_dump_crtc_timings] crtc timings: 151200 1920 1928 1992 2056 1200 1202 1206 1234, type: 0x0 flags: 0x5
[ 1061.425691] [drm:intel_dump_pipe_config] port clock: 162000
[ 1061.425693] [drm:intel_dump_pipe_config] pipe src size: 1920x1200
[ 1061.425695] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 1061.425696] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1061.425698] [drm:intel_dump_pipe_config] ips: 0
[ 1061.425699] [drm:intel_dump_pipe_config] double wide: 0
[ 1061.425705] [drm:intel_display_power_get] enabling display
[ 1061.425708] [drm:hsw_set_power_well] Enabling power well
[ 1061.428480] [drm:ironlake_update_primary_plane] Writing base 03DD7000 00000000 0 0 15360
[ 1061.428487] [drm:intel_edp_psr_match_conditions] PSR disable by flag
[ 1061.428492] [drm:intel_crtc_mode_set] [ENCODER:24:TMDS-24] set [MODE:0:]
[ 1061.428494] [drm:intel_ddi_mode_set] Preparing DDI mode on port C, pipe B
[ 1061.429939] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
[ 1061.446482] [drm:intel_dp_start_link_train] clock recovery OK
[ 1061.463002] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
[ 1061.479491] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
[ 1061.495988] [drm:intel_dp_set_signal_levels] Using signal levels 04000000
[ 1061.512471] [drm:intel_dp_set_signal_levels] Using signal levels 04000000
[ 1061.528954] [drm:intel_dp_set_signal_levels] Using signal levels 04000000
[ 1061.545459] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
[ 1061.561087] usb 2-1: new high-speed USB device number 8 using xhci_hcd
[ 1061.563166] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
[ 1061.579698] [drm:intel_dp_start_link_train] clock recovery OK
[ 1061.596215] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
[ 1061.617092] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
[ 1061.665128] [drm:intel_update_fbc] more than one pipe active, disabling compression
[ 1061.665137] [drm:intel_connector_check_state] [CONNECTOR:14:eDP-1]
[ 1061.665142] [drm:intel_connector_check_state] [CONNECTOR:25:DP-1]
[ 1061.665145] [drm:check_encoder_state] [ENCODER:13:TMDS-13]
[ 1061.665147] [drm:check_encoder_state] [ENCODER:22:TMDS-22]
[ 1061.665148] [drm:check_encoder_state] [ENCODER:24:TMDS-24]
[ 1061.665150] [drm:check_crtc_state] [CRTC:5]
[ 1061.665158] [drm:check_crtc_state] [CRTC:8]
[ 1061.665163] [drm:check_crtc_state] [CRTC:11]
[ 1061.665236] [drm:intel_crtc_cursor_set] cursor off
[ 1061.666675] [drm:drm_mode_setcrtc] [CRTC:5]
[ 1061.666679] [drm:drm_mode_setcrtc] [CONNECTOR:14:eDP-1]
[ 1061.666681] [drm:intel_crtc_set_config] [CRTC:5] [FB:53] #connectors=1 (x y) (1920 0)
[ 1061.666684] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=1
[ 1061.666685] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]
[ 1061.666687] [drm:intel_modeset_stage_output_state] [CONNECTOR:25:DP-1] to [CRTC:8]
[ 1061.666691] [drm:ironlake_update_primary_plane] Writing base 03DD7000 FFFFFFFFFFFF2E00 0 0 15360
[ 1061.666694] [drm:intel_edp_psr_match_conditions] PSR disable by flag
[ 1061.693247] usb 2-1: New USB device found, idVendor=413c, idProduct=2513
[ 1061.693252] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1061.693622] hub 2-1:1.0: USB hub found
[ 1061.693683] hub 2-1:1.0: 3 ports detected
[ 1061.729397] [drm:asle_set_backlight] bclp = 0x80000029
[ 1061.729402] [drm:asle_set_backlight] updating opregion backlight 41/255
[ 1061.729405] [drm:intel_panel_actually_set_backlight] set backlight PWM = 150
[ 1061.785230] usb 2-6.1: new low-speed USB device number 9 using xhci_hcd
[ 1061.896048] usb 2-6.1: New USB device found, idVendor=046d, idProduct=c313
[ 1061.896052] usb 2-6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1061.896054] usb 2-6.1: Product: USB Multimedia Keyboard
[ 1061.896055] usb 2-6.1: Manufacturer: LITEON Technology
[ 1061.896181] usb 2-6.1: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes
[ 1061.896185] usb 2-6.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1061.899251] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6.1/2-6.1:1.0/0003:046D:C313.0004/input/input20
[ 1061.899358] hid-generic 0003:046D:C313.0004: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:14.0-6.1/input0
[ 1061.901578] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6.1/2-6.1:1.1/0003:046D:C313.0005/input/input21
[ 1061.901691] hid-generic 0003:046D:C313.0005: input,hidraw1: USB HID v1.10 Device [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:14.0-6.1/input1
[ 1061.973387] usb 2-6.2: new low-speed USB device number 10 using xhci_hcd
[ 1062.083609] usb 2-6.2: New USB device found, idVendor=046d, idProduct=c050
[ 1062.083611] usb 2-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1062.083613] usb 2-6.2: Product: USB-PS/2 Optical Mouse
[ 1062.083615] usb 2-6.2: Manufacturer: Logitech
[ 1062.083748] usb 2-6.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1062.087807] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6.2/2-6.2:1.0/0003:046D:C050.0006/input/input22
[ 1062.087962] hid-generic 0003:046D:C050.0006: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:14.0-6.2/input0
[ 1062.181848] pci_bus 0000:01: Allocating resources
[ 1062.181862] pci_bus 0000:02: Allocating resources
[ 1062.181876] pci_bus 0000:03: Allocating resources
[ 1062.181890] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1062.181901] i915 0000:00:02.0: no hotplug settings from platform
[ 1062.181904] i915 0000:00:02.0: using default PCI settings
[ 1062.181910] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[ 1062.181914] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[ 1062.181916] xhci_hcd 0000:00:14.0: using default PCI settings
[ 1062.181923] mei_me 0000:00:16.0: no hotplug settings from platform
[ 1062.181925] mei_me 0000:00:16.0: using default PCI settings
[ 1062.181933] serial 0000:00:16.3: no hotplug settings from platform
[ 1062.181934] serial 0000:00:16.3: using default PCI settings
[ 1062.181942] e1000e 0000:00:19.0: no hotplug settings from platform
[ 1062.181944] e1000e 0000:00:19.0: using default PCI settings
[ 1062.181951] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[ 1062.181955] pcieport 0000:00:1c.0: no hotplug settings from platform
[ 1062.181959] pcieport 0000:00:1c.3: no hotplug settings from platform
[ 1062.181969] iwlwifi 0000:02:00.0: no hotplug settings from platform
[ 1062.181972] pcieport 0000:00:1c.4: no hotplug settings from platform
[ 1062.181980] sdhci-pci 0000:03:00.0: no hotplug settings from platform
[ 1062.181984] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[ 1062.181985] ehci-pci 0000:00:1d.0: using default PCI settings
[ 1062.181994] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[ 1062.181996] lpc_ich 0000:00:1f.0: using default PCI settings
[ 1062.182006] ahci 0000:00:1f.2: no hotplug settings from platform
[ 1062.182008] ahci 0000:00:1f.2: using default PCI settings
[ 1062.182015] pci 0000:00:1f.3: no hotplug settings from platform
[ 1062.182016] pci 0000:00:1f.3: using default PCI settings
[ 1062.182412] ACPI: Error installing CMOS-RTC region handler
[ 1062.277670] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1062.277684] i915 0000:00:02.0: no hotplug settings from platform
[ 1062.277686] i915 0000:00:02.0: using default PCI settings
[ 1062.277691] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[ 1062.277694] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[ 1062.277695] xhci_hcd 0000:00:14.0: using default PCI settings
[ 1062.277700] mei_me 0000:00:16.0: no hotplug settings from platform
[ 1062.277701] mei_me 0000:00:16.0: using default PCI settings
[ 1062.277707] serial 0000:00:16.3: no hotplug settings from platform
[ 1062.277708] serial 0000:00:16.3: using default PCI settings
[ 1062.277714] e1000e 0000:00:19.0: no hotplug settings from platform
[ 1062.277715] e1000e 0000:00:19.0: using default PCI settings
[ 1062.277720] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[ 1062.277723] pcieport 0000:00:1c.0: no hotplug settings from platform
[ 1062.277726] pcieport 0000:00:1c.3: no hotplug settings from platform
[ 1062.277734] iwlwifi 0000:02:00.0: no hotplug settings from platform
[ 1062.277737] pcieport 0000:00:1c.4: no hotplug settings from platform
[ 1062.277743] sdhci-pci 0000:03:00.0: no hotplug settings from platform
[ 1062.277745] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[ 1062.277746] ehci-pci 0000:00:1d.0: using default PCI settings
[ 1062.277753] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[ 1062.277755] lpc_ich 0000:00:1f.0: using default PCI settings
[ 1062.277762] ahci 0000:00:1f.2: no hotplug settings from platform
[ 1062.277763] ahci 0000:00:1f.2: using default PCI settings
[ 1062.277768] pci 0000:00:1f.3: no hotplug settings from platform
[ 1062.277769] pci 0000:00:1f.3: using default PCI settings
[ 1062.277794] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1062.277799] i915 0000:00:02.0: no hotplug settings from platform
[ 1062.277800] i915 0000:00:02.0: using default PCI settings
[ 1062.277803] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[ 1062.277805] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[ 1062.277806] xhci_hcd 0000:00:14.0: using default PCI settings
[ 1062.277811] mei_me 0000:00:16.0: no hotplug settings from platform
[ 1062.277812] mei_me 0000:00:16.0: using default PCI settings
[ 1062.277818] serial 0000:00:16.3: no hotplug settings from platform
[ 1062.277819] serial 0000:00:16.3: using default PCI settings
[ 1062.277825] e1000e 0000:00:19.0: no hotplug settings from platform
[ 1062.277826] e1000e 0000:00:19.0: using default PCI settings
[ 1062.277831] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[ 1062.277833] pcieport 0000:00:1c.0: no hotplug settings from platform
[ 1062.277836] pcieport 0000:00:1c.3: no hotplug settings from platform
[ 1062.277841] iwlwifi 0000:02:00.0: no hotplug settings from platform
[ 1062.277843] pcieport 0000:00:1c.4: no hotplug settings from platform
[ 1062.277849] sdhci-pci 0000:03:00.0: no hotplug settings from platform
[ 1062.277851] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[ 1062.277852] ehci-pci 0000:00:1d.0: using default PCI settings
[ 1062.277858] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[ 1062.277859] lpc_ich 0000:00:1f.0: using default PCI settings
[ 1062.277866] ahci 0000:00:1f.2: no hotplug settings from platform
[ 1062.277867] ahci 0000:00:1f.2: using default PCI settings
[ 1062.277872] pci 0000:00:1f.3: no hotplug settings from platform
[ 1062.277873] pci 0000:00:1f.3: using default PCI settings
[ 1062.277916] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1062.277922] i915 0000:00:02.0: no hotplug settings from platform
[ 1062.277924] i915 0000:00:02.0: using default PCI settings
[ 1062.277929] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[ 1062.277932] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[ 1062.277933] xhci_hcd 0000:00:14.0: using default PCI settings
[ 1062.277939] mei_me 0000:00:16.0: no hotplug settings from platform
[ 1062.277941] mei_me 0000:00:16.0: using default PCI settings
[ 1062.277948] serial 0000:00:16.3: no hotplug settings from platform
[ 1062.277950] serial 0000:00:16.3: using default PCI settings
[ 1062.277956] e1000e 0000:00:19.0: no hotplug settings from platform
[ 1062.277958] e1000e 0000:00:19.0: using default PCI settings
[ 1062.277964] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[ 1062.277967] pcieport 0000:00:1c.0: no hotplug settings from platform
[ 1062.277970] pcieport 0000:00:1c.3: no hotplug settings from platform
[ 1062.277977] iwlwifi 0000:02:00.0: no hotplug settings from platform
[ 1062.277980] pcieport 0000:00:1c.4: no hotplug settings from platform
[ 1062.277986] sdhci-pci 0000:03:00.0: no hotplug settings from platform
[ 1062.277989] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[ 1062.277990] ehci-pci 0000:00:1d.0: using default PCI settings
[ 1062.277997] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[ 1062.277999] lpc_ich 0000:00:1f.0: using default PCI settings
[ 1062.278007] ahci 0000:00:1f.2: no hotplug settings from platform
[ 1062.278009] ahci 0000:00:1f.2: using default PCI settings
[ 1062.278015] pci 0000:00:1f.3: no hotplug settings from platform
[ 1062.278016] pci 0000:00:1f.3: using default PCI settings
[ 1062.278263] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1062.278268] i915 0000:00:02.0: no hotplug settings from platform
[ 1062.278269] i915 0000:00:02.0: using default PCI settings
[ 1062.278273] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[ 1062.278275] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[ 1062.278276] xhci_hcd 0000:00:14.0: using default PCI settings
[ 1062.278282] mei_me 0000:00:16.0: no hotplug settings from platform
[ 1062.278283] mei_me 0000:00:16.0: using default PCI settings
[ 1062.278288] serial 0000:00:16.3: no hotplug settings from platform
[ 1062.278289] serial 0000:00:16.3: using default PCI settings
[ 1062.278295] e1000e 0000:00:19.0: no hotplug settings from platform
[ 1062.278296] e1000e 0000:00:19.0: using default PCI settings
[ 1062.278301] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[ 1062.278303] pcieport 0000:00:1c.0: no hotplug settings from platform
[ 1062.278305] pcieport 0000:00:1c.3: no hotplug settings from platform
[ 1062.278311] iwlwifi 0000:02:00.0: no hotplug settings from platform
[ 1062.278313] pcieport 0000:00:1c.4: no hotplug settings from platform
[ 1062.278318] sdhci-pci 0000:03:00.0: no hotplug settings from platform
[ 1062.278321] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[ 1062.278322] ehci-pci 0000:00:1d.0: using default PCI settings
[ 1062.278328] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[ 1062.278329] lpc_ich 0000:00:1f.0: using default PCI settings
[ 1062.278336] ahci 0000:00:1f.2: no hotplug settings from platform
[ 1062.278337] ahci 0000:00:1f.2: using default PCI settings
[ 1062.278342] pci 0000:00:1f.3: no hotplug settings from platform
[ 1062.278343] pci 0000:00:1f.3: using default PCI settings
[ 1062.278356] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1062.278359] i915 0000:00:02.0: no hotplug settings from platform
[ 1062.278360] i915 0000:00:02.0: using default PCI settings
[ 1062.278364] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[ 1062.278366] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[ 1062.278367] xhci_hcd 0000:00:14.0: using default PCI settings
[ 1062.278372] mei_me 0000:00:16.0: no hotplug settings from platform
[ 1062.278373] mei_me 0000:00:16.0: using default PCI settings
[ 1062.278379] serial 0000:00:16.3: no hotplug settings from platform
[ 1062.278380] serial 0000:00:16.3: using default PCI settings
[ 1062.278385] e1000e 0000:00:19.0: no hotplug settings from platform
[ 1062.278386] e1000e 0000:00:19.0: using default PCI settings
[ 1062.278391] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[ 1062.278393] pcieport 0000:00:1c.0: no hotplug settings from platform
[ 1062.278396] pcieport 0000:00:1c.3: no hotplug settings from platform
[ 1062.278401] iwlwifi 0000:02:00.0: no hotplug settings from platform
[ 1062.278403] pcieport 0000:00:1c.4: no hotplug settings from platform
[ 1062.278409] sdhci-pci 0000:03:00.0: no hotplug settings from platform
[ 1062.278411] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[ 1062.278412] ehci-pci 0000:00:1d.0: using default PCI settings
[ 1062.278418] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[ 1062.278419] lpc_ich 0000:00:1f.0: using default PCI settings
[ 1062.278426] ahci 0000:00:1f.2: no hotplug settings from platform
[ 1062.278427] ahci 0000:00:1f.2: using default PCI settings
[ 1062.278432] pci 0000:00:1f.3: no hotplug settings from platform
[ 1062.278433] pci 0000:00:1f.3: using default PCI settings
[ 1062.278475] acpi MSFT1111:00: Cannot transition to power state D3cold for parent in (unknown)
[ 1062.278477] acpi INT33C2:00: Cannot transition to non-D0 state from D3
[ 1062.278478] acpi MSFT0002:00: Cannot transition to power state D3cold for parent in (unknown)
[ 1062.278479] acpi ELAN1010:00: Cannot transition to power state D3cold for parent in (unknown)
[ 1062.278481] acpi INT33C3:00: Cannot transition to non-D0 state from D3
[ 1062.278483] acpi INT33C0:00: Cannot transition to non-D0 state from D3
[ 1062.278484] acpi INT33C1:00: Cannot transition to non-D0 state from D3
[ 1062.278485] acpi INT33C4:00: Cannot transition to non-D0 state from D3
[ 1062.278487] acpi INT33C5:00: Cannot transition to non-D0 state from D3
[ 1062.278493] acpi device:40: Cannot transition to power state D3cold for parent in (unknown)
[ 1062.278494] acpi INT33C6:00: Cannot transition to non-D0 state from D3
[ 1062.278541] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1062.278545] i915 0000:00:02.0: no hotplug settings from platform
[ 1062.278546] i915 0000:00:02.0: using default PCI settings
[ 1062.278550] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[ 1062.278552] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[ 1062.278553] xhci_hcd 0000:00:14.0: using default PCI settings
[ 1062.278558] mei_me 0000:00:16.0: no hotplug settings from platform
[ 1062.278559] mei_me 0000:00:16.0: using default PCI settings
[ 1062.278565] serial 0000:00:16.3: no hotplug settings from platform
[ 1062.278566] serial 0000:00:16.3: using default PCI settings
[ 1062.278571] e1000e 0000:00:19.0: no hotplug settings from platform
[ 1062.278572] e1000e 0000:00:19.0: using default PCI settings
[ 1062.278577] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[ 1062.278579] pcieport 0000:00:1c.0: no hotplug settings from platform
[ 1062.278582] pcieport 0000:00:1c.3: no hotplug settings from platform
[ 1062.278587] iwlwifi 0000:02:00.0: no hotplug settings from platform
[ 1062.278589] pcieport 0000:00:1c.4: no hotplug settings from platform
[ 1062.278595] sdhci-pci 0000:03:00.0: no hotplug settings from platform
[ 1062.278597] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[ 1062.278598] ehci-pci 0000:00:1d.0: using default PCI settings
[ 1062.278604] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[ 1062.278605] lpc_ich 0000:00:1f.0: using default PCI settings
[ 1062.278612] ahci 0000:00:1f.2: no hotplug settings from platform
[ 1062.278613] ahci 0000:00:1f.2: using default PCI settings
[ 1062.278618] pci 0000:00:1f.3: no hotplug settings from platform
[ 1062.278619] pci 0000:00:1f.3: using default PCI settings
[ 1062.278700] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1062.278704] i915 0000:00:02.0: no hotplug settings from platform
[ 1062.278705] i915 0000:00:02.0: using default PCI settings
[ 1062.278708] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[ 1062.278710] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[ 1062.278711] xhci_hcd 0000:00:14.0: using default PCI settings
[ 1062.278716] mei_me 0000:00:16.0: no hotplug settings from platform
[ 1062.278717] mei_me 0000:00:16.0: using default PCI settings
[ 1062.278723] serial 0000:00:16.3: no hotplug settings from platform
[ 1062.278724] serial 0000:00:16.3: using default PCI settings
[ 1062.278729] e1000e 0000:00:19.0: no hotplug settings from platform
[ 1062.278730] e1000e 0000:00:19.0: using default PCI settings
[ 1062.278735] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[ 1062.278737] pcieport 0000:00:1c.0: no hotplug settings from platform
[ 1062.278740] pcieport 0000:00:1c.3: no hotplug settings from platform
[ 1062.278745] iwlwifi 0000:02:00.0: no hotplug settings from platform
[ 1062.278748] pcieport 0000:00:1c.4: no hotplug settings from platform
[ 1062.278753] sdhci-pci 0000:03:00.0: no hotplug settings from platform
[ 1062.278755] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[ 1062.278756] ehci-pci 0000:00:1d.0: using default PCI settings
[ 1062.278762] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[ 1062.278763] lpc_ich 0000:00:1f.0: using default PCI settings
[ 1062.278770] ahci 0000:00:1f.2: no hotplug settings from platform
[ 1062.278771] ahci 0000:00:1f.2: using default PCI settings
[ 1062.278776] pci 0000:00:1f.3: no hotplug settings from platform
[ 1062.278777] pci 0000:00:1f.3: using default PCI settings
[ 1064.318810] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off
[ 1064.318817] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
[ 1076.814572] [drm:intel_crtc_cursor_set] cursor off
[ 1079.472183] [drm:intel_crtc_cursor_set] cursor off
[ 1083.232022] [drm:intel_crtc_cursor_set] cursor off