*** End of the configuration. *** Execute 'make' to start the build or try 'make help'. * >> Compiling 3.12.21-gentoo-r1 bzImage... * >> Not installing firmware as it's included in the kernel already (CONFIG_FIRMWARE_IN_KERNEL=y)... * >> Compiling 3.12.21-gentoo-r1 modules... * >> Generating module dependency data... * Copying config for successful build to /etc/kernels/kernel-config-x86_64-3.12.21-gentoo-r1 * busybox: >> Using cache * initramfs: >> Initializing... * >> Appending base_layout cpio data... * >> Appending udev cpio data... cp: cannot stat ■/etc/modprobe.d/blacklist.conf■: No such file or directory * cannot copy /etc/modprobe.d/blacklist.conf from udev cp: cannot stat ■/lib/systemd/network/99-default.link■: No such file or directory * cannot copy /lib/systemd/network/99-default.link from udev * >> Appending auxilary cpio data... * >> Copying keymaps * >> Appending busybox cpio data... * >> Appending modules cpio data... * >> Appending blkid cpio data... * >> Appending ld_so_conf cpio data... * ldconfig: adding /sbin/ldconfig... * ld.so.conf: adding /etc/ld.so.conf{.d/*,}... cpio: lib64 not created: newer or same age version exists cpio: lib64 not created: newer or same age version exists cpio: lib64/libuuid.so.1 not created: newer or same age version exists cpio: lib64/ld-linux-x86-64.so.2 not created: newer or same age version exists cpio: lib64/libc.so.6 not created: newer or same age version exists cpio: lib64/libblkid.so.1 not created: newer or same age version exists * >> Finalizing cpio... * >> Compressing cpio data (.xz)... * * Kernel compiled successfully! * * Required Kernel Parameters: * root=/dev/$ROOT * * Where $ROOT is the device node for your root partition as the * one specified in /etc/fstab * * If you require Genkernel's hardware detection features; you MUST * tell your bootloader to use the provided INITRAMFS file. * WARNING... WARNING... WARNING... * Additional kernel cmdline arguments that *may* be required to boot properly... * With support for several ext* filesystems available, it may be needed to * add "rootfstype=ext3" or "rootfstype=ext4" to the list of boot parameters. * Do NOT report kernel bugs as genkernel bugs unless your bug * is about the default genkernel configuration... * * Make sure you have the latest ~arch genkernel before reporting bugs. r8169 0000:08:00.0 enp8s0: link up IPv6: ADDRCONF(NETDEV_CHANGE): enp8s0: link becomes ready Generating grub.cfg ... Found linux image: /boot/kernel-genkernel-x86_64-3.12.21-gentoo-r1 Found initrd image: /boot/initramfs-genkernel-x86_64-3.12.21-gentoo-r1 No volume groups found EXT3-fs (sda3): error: unable to read superblock EXT2-fs (sda3): error: unable to read superblock EXT4-fs (sda3): unable to read superblock FAT-fs (sda3): bogus number of reserved sectors FAT-fs (sda3): Can't find a valid FAT filesystem FAT-fs (sda3): bogus number of reserved sectors FAT-fs (sda3): Can't find a valid FAT filesystem isofs_fill_super: bread failed, dev=sda3, iso_blknum=16, block=32 UDF-fs: error (device sda3): udf_read_tagged: read failed, block=256, location=256 UDF-fs: error (device sda3): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0 UDF-fs: error (device sda3): udf_read_tagged: read failed, block=512, location=512 UDF-fs: error (device sda3): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0 UDF-fs: error (device sda3): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0 UDF-fs: warning (device sda3): udf_load_vrs: No anchor found UDF-fs: Rescanning with blocksize 2048 UDF-fs: error (device sda3): udf_read_tagged: read failed, block=256, location=256 UDF-fs: error (device sda3): udf_read_tagged: read failed, block=512, location=512 UDF-fs: warning (device sda3): udf_load_vrs: No anchor found UDF-fs: warning (device sda3): udf_fill_super: No partition found (1) Found Windows 7 (loader) on /dev/sda2 done sudo blkid /dev/sda6: UUID="21a112bb-fc7d-4940-ab6f-a58c4f412f59" TYPE="ext4" PARTUUID="00013d45-06" /dev/sda1: UUID="ca10acb0-44f7-4a7f-bd18-efcf5eb86b89" TYPE="ext4" PARTUUID="00013d45-01" /dev/sda2: UUID="ECAA946FAA943852" TYPE="ntfs" PARTUUID="00013d45-02" /dev/sda5: UUID="585c1195-df9a-4506-8879-0f594ae3d1ec" TYPE="swap" PARTUUID="00013d45-05" /dev/sda7: UUID="899416ff-1ef4-49fd-b9ff-e0cb3b42b123" TYPE="ext4" PARTUUID="00013d45-07" /dev/sda8: UUID="a263fb3d-cf36-4f0a-bc01-bf9453311da9" TYPE="ext4" PARTUUID="00013d45-08" /dev/sda9: UUID="f44943c5-3391-41ee-956b-89fb2d4102f7" TYPE="ext4" PARTUUID="00013d45-09" /dev/sdc1: UUID="4341-FA8F" TYPE="vfat" PARTUUID="3b6906fe-b843-49ce-9e65-8dc12e3919ef" armoken@armoken-laptop ~ $ fdisk -l /dev/sda -bash: fdisk: command not found armoken@armoken-laptop ~ $ sudo fdisk -l /dev/sda Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disklabel type: dos Disk identifier: 0x00013d45 Partition 1 does not start on physical sector boundary. Device Boot Start End Blocks Id System /dev/sda1 * 63 1992059 995998+ 7 HPFS/NTFS/exFAT /dev/sda2 1992704 101996543 50001920 7 HPFS/NTFS/exFAT /dev/sda3 101996544 1953523711 925763584 5 Extended /dev/sda5 101998592 110387199 4194304 83 Linux /dev/sda6 110389248 183789567 36700160 83 Linux /dev/sda7 183791616 257191935 36700160 83 Linux /dev/sda8 257193984 1305769983 524288000 83 Linux /dev/sda9 1305772032 1953523711 323875840 83 Linux armoken@armoken-laptop ~ $ grep -v "#\|^$" /etc/fstab /dev/sda1 /boot ext4 defaults,noatime 0 2 /dev/sda6 / ext4 noatime 0 1 /dev/sda5 none swap sw 0 0 /dev/sda7 /home ext4 defaults 0 0 /dev/sda8 /mnt/all ext4 defaults 0 0 /dev/sda9 /mnt/films ext4 defaults 0 0 /dev/sda2 /windows ntfs defaults 0 0 GRUB_DISTRIBUTOR="Gentoo" GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 # Append parameters to the linux kernel command line GRUB_CMDLINE_LINUX="init=/usr/lib/systemd/systemd" # Append parameters to the linux kernel command line for non-recovery entries GRUB_CMDLINE_LINUX_DEFAULT="video=uvesafb:mtrr:3,ywrap,1366x768-32@75" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal. # Note that you can use only modes which your graphic card supports via VBE. # You can see them in real GRUB with the command `vbeinfo'. #GRUB_GFXMODE=640x480 # Path to theme spec txt file. # The starfield is by default provided with use truetype. # NOTE: when enabling custom theme, ensure you have required font/etc. #GRUB_THEME="/boot/grub/themes/starfield/theme.txt" # Background image used on graphical terminal. # Can be in various bitmap formats. #GRUB_BACKGROUND="/boot/grub/mybackground.png" # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to kernel #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY=true This is armoken-laptop. Now 22:04:57 Mon Aug 4 2014 armoken-laptop login: r8169 0000:08:00.0 enp8s0: link down r8169 0000:08:00.0 enp8s0: link down IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready r8169 0000:08:00.0 enp8s0: link up IPv6: ADDRCONF(NETDEV_CHANGE): enp8s0: link becomes ready usb 1-2: new high-speed USB device number 5 using xhci_hcd usb 1-2: New USB device found, idVendor=0951, idProduct=1624 usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-2: Product: DataTraveler G2 usb 1-2: Manufacturer: Kingston usb 1-2: SerialNumber: 001CC0EC34D1F9C126A00CB4 usb 1-2: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes usb 1-2: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes usb-storage 1-2:1.0: USB Mass Storage device detected scsi5 : usb-storage 1-2:1.0 scsi 5:0:0:0: Direct-Access Kingston DataTraveler G2 1.00 PQ: 0 ANSI: 2 sd 5:0:0:0: Attached scsi generic sg2 type 0 sd 5:0:0:0: [sdb] 31252024 512-byte logical blocks: (16.0 GB/14.9 GiB) sd 5:0:0:0: [sdb] Write Protect is off sd 5:0:0:0: [sdb] Incomplete mode parameter data sd 5:0:0:0: [sdb] Assuming drive cache: write through sd 5:0:0:0: [sdb] Incomplete mode parameter data sd 5:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 sd 5:0:0:0: [sdb] Incomplete mode parameter data sd 5:0:0:0: [sdb] Assuming drive cache: write through sd 5:0:0:0: [sdb] Attached SCSI removable disk armoken Password: Last login: Mon Aug 4 21:41:25 FET 2014 on tty1 # This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. # # See journald.conf(5) for details [Journal] Storage=auto Compress=no Seal=yes #SplitMode=uid #SyncIntervalSec=5m #RateLimitInterval=30s #RateLimitBurst=1000 SystemMaxUse=100M #SystemKeepFree= #SystemMaxFileSize= #RuntimeMaxUse= #RuntimeKeepFree= #RuntimeMaxFileSize= #MaxRetentionSec= #MaxFileSec=1month ForwardToSyslog=no ForwardToKMsg=no ForwardToConsole=yes ForwardToWall=no TTYPath=/dev/tty12 #MaxLevelStore=debug #MaxLevelSyslog=debug #MaxLevelKMsg=notice MaxLevelConsole=notice #MaxLevelWall=emerg [ 6.721583] input: PC Speaker as /devices/platform/pcspkr/input/input12 [ 6.732756] ACPI Warning: SystemIO range 0x0000000000006040-0x000000000000605f conflicts with OpRegion 0x0000000000006040-0x000000000000604f (\_SB_.PCI0.SBUS.SMBI) (20131218/utaddress-258) [ 6.732845] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.758698] r8169 0000:08:00.0 eth0: link down [ 6.758710] r8169 0000:08:00.0 eth0: link down [ 6.758721] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.862348] iwlwifi 0000:09:00.0: loaded firmware version 22.1.7.0 op_mode iwlmvm [ 6.862357] iwlwifi 0000:09:00.0: Detected Intel(R) Wireless N 7260, REV=0x144 [ 6.862404] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S [ 6.862632] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S [ 6.994724] nvidia: module license 'NVIDIA' taints kernel. [ 6.994749] Disabling lock debugging due to kernel taint [ 7.004155] nvidia 0000:07:00.0: enabling device (0006 -> 0007) [ 7.004479] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:07:00.0 on minor 1 [ 7.004484] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.24 Wed Jul 2 14:24:20 PDT 2014 [ 7.056811] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 7.066385] nvidia 0000:07:00.0: irq 51 for MSI/MSI-X [ 7.068907] ACPI Warning: \_SB_.PCI0.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95) [ 7.068994] ACPI Warning: \_SB_.PCI0.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95) [ 7.069060] ACPI Warning: \_SB_.PCI0.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95) [ 7.069134] ACPI Warning: \_SB_.PCI0.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95) [ 7.069199] ACPI Warning: \_SB_.PCI0.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95) [ 7.069262] ACPI Warning: \_SB_.PCI0.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95) [ 7.069343] ACPI Warning: \_SB_.PCI0.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95) [ 7.069408] ACPI Warning: \_SB_.PCI0.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95) [ 7.108104] systemd-udevd[2142]: renamed network interface wlan0 to wlp9s0 [ 7.134276] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S [ 7.134509] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S [ 7.146050] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [ 8.467737] r8169 0000:08:00.0 eth0: link up [ 8.467744] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 11.218236] ACPI Warning: \_SB_.PCI0.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)