[ 0.870710] calling amd_ibs_init+0x0/0x1bb @ 1 [ 0.870714] initcall amd_ibs_init+0x0/0x1bb returned -19 after 0 usecs [ 0.870720] calling msr_init+0x0/0x11e @ 1 [ 0.870931] initcall msr_init+0x0/0x11e returned 0 after 198 usecs [ 0.870941] calling cpuid_init+0x0/0x11e @ 1 [ 0.871086] initcall cpuid_init+0x0/0x11e returned 0 after 136 usecs [ 0.871093] calling ioapic_init_ops+0x0/0x13 @ 1 [ 0.871097] initcall ioapic_init_ops+0x0/0x13 returned 0 after 0 usecs [ 0.871102] calling add_pcspkr+0x0/0x3f @ 1 [ 0.871125] initcall add_pcspkr+0x0/0x3f returned 0 after 18 usecs [ 0.871131] calling sysfb_init+0x0/0x6f @ 1 [ 0.871157] initcall sysfb_init+0x0/0x6f returned 0 after 21 usecs [ 0.871163] calling audit_classes_init+0x0/0xac @ 1 [ 0.871170] initcall audit_classes_init+0x0/0xac returned 0 after 2 usecs [ 0.871177] calling ia32_binfmt_init+0x0/0x11 @ 1 [ 0.871185] initcall ia32_binfmt_init+0x0/0x11 returned 0 after 4 usecs [ 0.871191] calling proc_execdomains_init+0x0/0x1f @ 1 [ 0.871198] initcall proc_execdomains_init+0x0/0x1f returned 0 after 3 usecs [ 0.871204] calling ioresources_init+0x0/0x39 @ 1 [ 0.871209] initcall ioresources_init+0x0/0x39 returned 0 after 2 usecs [ 0.871216] calling init_posix_timers+0x0/0x236 @ 1 [ 0.871228] initcall init_posix_timers+0x0/0x236 returned 0 after 7 usecs [ 0.871235] calling init_posix_cpu_timers+0x0/0xc1 @ 1 [ 0.871239] initcall init_posix_cpu_timers+0x0/0xc1 returned 0 after 0 usecs [ 0.871247] calling snapshot_device_init+0x0/0xc @ 1 [ 0.871281] initcall snapshot_device_init+0x0/0xc returned 0 after 28 usecs [ 0.871286] calling irq_pm_init_ops+0x0/0x11 @ 1 [ 0.871290] initcall irq_pm_init_ops+0x0/0x11 returned 0 after 0 usecs [ 0.871294] calling timekeeping_init_ops+0x0/0x11 @ 1 [ 0.871298] initcall timekeeping_init_ops+0x0/0x11 returned 0 after 0 usecs [ 0.871302] calling init_clocksource_sysfs+0x0/0x67 @ 1 [ 0.871348] initcall init_clocksource_sysfs+0x0/0x67 returned 0 after 40 usecs [ 0.871353] calling init_timer_list_procfs+0x0/0x2b @ 1 [ 0.871358] initcall init_timer_list_procfs+0x0/0x2b returned 0 after 1 usecs [ 0.871373] calling alarmtimer_init+0x0/0x193 @ 1 [ 0.871422] initcall alarmtimer_init+0x0/0x193 returned 0 after 44 usecs [ 0.871427] calling clockevents_init_sysfs+0x0/0xc5 @ 1 [ 0.871620] initcall clockevents_init_sysfs+0x0/0xc5 returned 0 after 185 usecs [ 0.871626] calling futex_init+0x0/0xda @ 1 [ 0.871649] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.871792] initcall futex_init+0x0/0xda returned 0 after 158 usecs [ 0.871796] calling proc_dma_init+0x0/0x1f @ 1 [ 0.871801] initcall proc_dma_init+0x0/0x1f returned 0 after 2 usecs [ 0.871805] calling proc_modules_init+0x0/0x1f @ 1 [ 0.871809] initcall proc_modules_init+0x0/0x1f returned 0 after 1 usecs [ 0.871813] calling kallsyms_init+0x0/0x22 @ 1 [ 0.871817] initcall kallsyms_init+0x0/0x22 returned 0 after 1 usecs [ 0.871821] calling pid_namespaces_init+0x0/0x2a @ 1 [ 0.871829] initcall pid_namespaces_init+0x0/0x2a returned 0 after 4 usecs [ 0.871833] calling ikconfig_init+0x0/0x3b @ 1 [ 0.871837] initcall ikconfig_init+0x0/0x3b returned 0 after 1 usecs [ 0.871841] calling audit_init+0x0/0xfd @ 1 [ 0.871843] audit: initializing netlink subsys (disabled) [ 0.871976] audit: type=2000 audit(1407959349.837:1): initialized [ 0.872099] initcall audit_init+0x0/0xfd returned 0 after 248 usecs [ 0.872103] calling audit_watch_init+0x0/0x37 @ 1 [ 0.872106] initcall audit_watch_init+0x0/0x37 returned 0 after 0 usecs [ 0.872110] calling audit_tree_init+0x0/0x54 @ 1 [ 0.872114] initcall audit_tree_init+0x0/0x54 returned 0 after 0 usecs [ 0.872118] calling init_kprobes+0x0/0x1b7 @ 1 [ 0.872158] initcall init_kprobes+0x0/0x1b7 returned 0 after 35 usecs [ 0.872162] calling utsname_sysctl_init+0x0/0x11 @ 1 [ 0.872173] initcall utsname_sysctl_init+0x0/0x11 returned 0 after 7 usecs [ 0.872177] calling init_tracepoints+0x0/0x25 @ 1 [ 0.872181] initcall init_tracepoints+0x0/0x25 returned 0 after 0 usecs [ 0.872186] calling irq_work_init_cpu_notifier+0x0/0x26 @ 1 [ 0.872191] initcall irq_work_init_cpu_notifier+0x0/0x26 returned 0 after 1 usecs [ 0.872196] calling perf_event_sysfs_init+0x0/0x8e @ 1 [ 0.872355] initcall perf_event_sysfs_init+0x0/0x8e returned 0 after 150 usecs [ 0.872373] calling init_uprobes+0x0/0x5d @ 1 [ 0.872379] initcall init_uprobes+0x0/0x5d returned 0 after 2 usecs [ 0.872387] calling init_per_zone_wmark_min+0x0/0x9b @ 1 [ 0.872419] initcall init_per_zone_wmark_min+0x0/0x9b returned 0 after 27 usecs [ 0.872425] calling kswapd_init+0x0/0x69 @ 1 [ 0.872457] initcall kswapd_init+0x0/0x69 returned 0 after 26 usecs [ 0.872464] calling setup_vmstat+0x0/0xdf @ 1 [ 0.872474] initcall setup_vmstat+0x0/0xdf returned 0 after 6 usecs [ 0.872480] calling mm_compute_batch_init+0x0/0x4d @ 1 [ 0.872484] initcall mm_compute_batch_init+0x0/0x4d returned 0 after 0 usecs [ 0.872490] calling slab_proc_init+0x0/0x22 @ 1 [ 0.872495] initcall slab_proc_init+0x0/0x22 returned 0 after 1 usecs [ 0.872501] calling workingset_init+0x0/0x44 @ 1 [ 0.872506] initcall workingset_init+0x0/0x44 returned 0 after 0 usecs [ 0.872512] calling proc_vmalloc_init+0x0/0x22 @ 1 [ 0.872517] initcall proc_vmalloc_init+0x0/0x22 returned 0 after 1 usecs [ 0.872524] calling procswaps_init+0x0/0x21 @ 1 [ 0.872529] initcall procswaps_init+0x0/0x21 returned 0 after 1 usecs [ 0.872536] calling hugetlb_init+0x0/0x49c @ 1 [ 0.872539] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.872679] initcall hugetlb_init+0x0/0x49c returned 0 after 135 usecs [ 0.872682] calling slab_sysfs_init+0x0/0xef @ 1 [ 0.875042] initcall slab_sysfs_init+0x0/0xef returned 0 after 2299 usecs [ 0.875046] calling fcntl_init+0x0/0x27 @ 1 [ 0.875052] initcall fcntl_init+0x0/0x27 returned 0 after 3 usecs [ 0.875057] calling proc_filesystems_init+0x0/0x1f @ 1 [ 0.875062] initcall proc_filesystems_init+0x0/0x1f returned 0 after 2 usecs [ 0.875066] calling dio_init+0x0/0x2a @ 1 [ 0.875071] initcall dio_init+0x0/0x2a returned 0 after 2 usecs [ 0.875075] calling fsnotify_mark_init+0x0/0x3d @ 1 [ 0.875098] initcall fsnotify_mark_init+0x0/0x3d returned 0 after 18 usecs [ 0.875104] calling dnotify_init+0x0/0x78 @ 1 [ 0.875112] initcall dnotify_init+0x0/0x78 returned 0 after 5 usecs [ 0.875116] calling inotify_user_setup+0x0/0x48 @ 1 [ 0.875121] initcall inotify_user_setup+0x0/0x48 returned 0 after 2 usecs [ 0.875125] calling aio_setup+0x0/0x7a @ 1 [ 0.875147] initcall aio_setup+0x0/0x7a returned 0 after 19 usecs [ 0.875152] calling proc_locks_init+0x0/0x1f @ 1 [ 0.875156] initcall proc_locks_init+0x0/0x1f returned 0 after 1 usecs [ 0.875161] calling init_sys32_ioctl+0x0/0x25 @ 1 [ 0.875257] initcall init_sys32_ioctl+0x0/0x25 returned 0 after 90 usecs [ 0.875261] calling init_mbcache+0x0/0x11 @ 1 [ 0.875264] initcall init_mbcache+0x0/0x11 returned 0 after 0 usecs [ 0.875269] calling dquot_init+0x0/0x10f @ 1 [ 0.875270] VFS: Disk quotas dquot_6.5.2 [ 0.875445] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.875571] initcall dquot_init+0x0/0x10f returned 0 after 291 usecs [ 0.875576] calling init_v2_quota_format+0x0/0x23 @ 1 [ 0.875579] initcall init_v2_quota_format+0x0/0x23 returned 0 after 0 usecs [ 0.875583] calling quota_init+0x0/0x2e @ 1 [ 0.875594] initcall quota_init+0x0/0x2e returned 0 after 7 usecs [ 0.875599] calling init_devpts_fs+0x0/0x5e @ 1 [ 0.875617] initcall init_devpts_fs+0x0/0x5e returned 0 after 14 usecs [ 0.875622] calling init_reiserfs_fs+0x0/0x68 @ 1 [ 0.875661] initcall init_reiserfs_fs+0x0/0x68 returned 0 after 34 usecs [ 0.875668] calling init_ext3_fs+0x0/0x7e @ 1 [ 0.875709] initcall init_ext3_fs+0x0/0x7e returned 0 after 36 usecs [ 0.875716] calling init_ext2_fs+0x0/0x7e @ 1 [ 0.875753] initcall init_ext2_fs+0x0/0x7e returned 0 after 32 usecs [ 0.875760] calling ext4_init_fs+0x0/0x213 @ 1 [ 0.875956] initcall ext4_init_fs+0x0/0x213 returned 0 after 186 usecs [ 0.875965] calling journal_init+0x0/0xa3 @ 1 [ 0.876116] initcall journal_init+0x0/0xa3 returned 0 after 142 usecs [ 0.876124] calling journal_init+0x0/0x109 @ 1 [ 0.876175] initcall journal_init+0x0/0x109 returned 0 after 44 usecs [ 0.876183] calling init_hugetlbfs_fs+0x0/0x160 @ 1 [ 0.876242] initcall init_hugetlbfs_fs+0x0/0x160 returned 0 after 52 usecs [ 0.876249] calling init_fat_fs+0x0/0x45 @ 1 [ 0.876319] initcall init_fat_fs+0x0/0x45 returned 0 after 63 usecs [ 0.876327] calling init_vfat_fs+0x0/0xc @ 1 [ 0.876334] initcall init_vfat_fs+0x0/0xc returned 0 after 1 usecs [ 0.876342] calling init_iso9660_fs+0x0/0x80 @ 1 [ 0.876397] initcall init_iso9660_fs+0x0/0x80 returned 0 after 49 usecs [ 0.876406] calling init_nfs_fs+0x0/0x136 @ 1 [ 0.876611] initcall init_nfs_fs+0x0/0x136 returned 0 after 195 usecs [ 0.876616] calling init_nfs_v2+0x0/0x11 @ 1 [ 0.876620] initcall init_nfs_v2+0x0/0x11 returned 0 after 0 usecs [ 0.876623] calling init_nfs_v3+0x0/0x11 @ 1 [ 0.876626] initcall init_nfs_v3+0x0/0x11 returned 0 after 0 usecs [ 0.876629] calling init_nfs_v4+0x0/0x3a @ 1 [ 0.876631] NFS: Registering the id_resolver key type [ 0.876756] Key type id_resolver registered [ 0.876871] Key type id_legacy registered [ 0.876990] initcall init_nfs_v4+0x0/0x3a returned 0 after 349 usecs [ 0.876994] calling init_nfsd+0x0/0x101 @ 1 [ 0.876996] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.877257] initcall init_nfsd+0x0/0x101 returned 0 after 253 usecs [ 0.877261] calling init_nlm+0x0/0x40 @ 1 [ 0.877271] initcall init_nlm+0x0/0x40 returned 0 after 6 usecs [ 0.877275] calling init_nls_cp437+0x0/0xe @ 1 [ 0.877278] initcall init_nls_cp437+0x0/0xe returned 0 after 0 usecs [ 0.877282] calling init_nls_ascii+0x0/0xe @ 1 [ 0.877285] initcall init_nls_ascii+0x0/0xe returned 0 after 0 usecs [ 0.877288] calling init_autofs4_fs+0x0/0x2b @ 1 [ 0.877326] initcall init_autofs4_fs+0x0/0x2b returned 0 after 32 usecs [ 0.877331] calling fuse_init+0x0/0x140 @ 1 [ 0.877334] fuse init (API version 7.23) [ 0.877578] initcall fuse_init+0x0/0x140 returned 0 after 236 usecs [ 0.877584] calling ipc_init+0x0/0x20 @ 1 [ 0.877589] msgmni has been set to 7314 [ 0.877712] initcall ipc_init+0x0/0x20 returned 0 after 122 usecs [ 0.877717] calling ipc_sysctl_init+0x0/0x11 @ 1 [ 0.877728] initcall ipc_sysctl_init+0x0/0x11 returned 0 after 8 usecs [ 0.877733] calling init_mqueue_fs+0x0/0x99 @ 1 [ 0.877795] initcall init_mqueue_fs+0x0/0x99 returned 0 after 57 usecs [ 0.877800] calling key_proc_init+0x0/0x56 @ 1 [ 0.877806] initcall key_proc_init+0x0/0x56 returned 0 after 3 usecs [ 0.877811] calling crypto_algapi_init+0x0/0xa @ 1 [ 0.877815] initcall crypto_algapi_init+0x0/0xa returned 0 after 1 usecs [ 0.877820] calling chainiv_module_init+0x0/0xc @ 1 [ 0.877824] initcall chainiv_module_init+0x0/0xc returned 0 after 0 usecs [ 0.877829] calling eseqiv_module_init+0x0/0xc @ 1 [ 0.877832] initcall eseqiv_module_init+0x0/0xc returned 0 after 0 usecs [ 0.877837] calling hmac_module_init+0x0/0xc @ 1 [ 0.877841] initcall hmac_module_init+0x0/0xc returned 0 after 0 usecs [ 0.877845] calling md5_mod_init+0x0/0xc @ 1 [ 0.877877] initcall md5_mod_init+0x0/0xc returned 0 after 27 usecs [ 0.877884] calling sha1_generic_mod_init+0x0/0xc @ 1 [ 0.877910] initcall sha1_generic_mod_init+0x0/0xc returned 0 after 21 usecs [ 0.877915] calling aes_init+0x0/0xc @ 1 [ 0.877941] initcall aes_init+0x0/0xc returned 0 after 21 usecs [ 0.877947] calling crc32c_mod_init+0x0/0xc @ 1 [ 0.877972] initcall crc32c_mod_init+0x0/0xc returned 0 after 21 usecs [ 0.877978] calling krng_mod_init+0x0/0xc @ 1 [ 0.878003] initcall krng_mod_init+0x0/0xc returned 0 after 20 usecs [ 0.878009] calling proc_genhd_init+0x0/0x39 @ 1 [ 0.878015] initcall proc_genhd_init+0x0/0x39 returned 0 after 2 usecs [ 0.878020] calling bsg_init+0x0/0x16c @ 1 [ 0.878068] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.880159] initcall bsg_init+0x0/0x16c returned 0 after 2083 usecs [ 0.880165] calling noop_init+0x0/0xc @ 1 [ 0.880167] io scheduler noop registered [ 0.880282] initcall noop_init+0x0/0xc returned 0 after 111 usecs [ 0.880288] calling deadline_init+0x0/0xc @ 1 [ 0.880290] io scheduler deadline registered [ 0.880416] initcall deadline_init+0x0/0xc returned 0 after 121 usecs [ 0.880421] calling cfq_init+0x0/0x7f @ 1 [ 0.880461] io scheduler cfq registered (default) [ 0.880582] initcall cfq_init+0x0/0x7f returned 0 after 153 usecs [ 0.880588] calling libcrc32c_mod_init+0x0/0x27 @ 1 [ 0.880593] initcall libcrc32c_mod_init+0x0/0x27 returned 0 after 1 usecs [ 0.880599] calling percpu_counter_startup+0x0/0x16 @ 1 [ 0.880603] initcall percpu_counter_startup+0x0/0x16 returned 0 after 1 usecs [ 0.880609] calling phy_core_init+0x0/0x4a @ 1 [ 0.880619] initcall phy_core_init+0x0/0x4a returned 0 after 5 usecs [ 0.880626] calling pci_proc_init+0x0/0x60 @ 1 [ 0.880653] initcall pci_proc_init+0x0/0x60 returned 0 after 22 usecs [ 0.880660] calling pcie_portdrv_init+0x0/0x6c @ 1 [ 0.880824] pcieport 0000:00:1c.0: irq 56 for MSI/MSI-X [ 0.881010] pcieport 0000:00:1c.2: irq 57 for MSI/MSI-X [ 0.881167] pcieport 0000:00:1c.3: irq 58 for MSI/MSI-X [ 0.881263] initcall pcie_portdrv_init+0x0/0x6c returned 0 after 584 usecs [ 0.881272] calling aer_service_init+0x0/0x1e @ 1 [ 0.881285] initcall aer_service_init+0x0/0x1e returned 0 after 9 usecs [ 0.881294] calling pcie_pme_service_init+0x0/0xc @ 1 [ 0.881320] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.881457] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 0.881475] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt [ 0.881597] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 0.881721] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded [ 0.881737] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt [ 0.881861] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded [ 0.881873] initcall pcie_pme_service_init+0x0/0xc returned 0 after 560 usecs [ 0.881881] calling pci_hotplug_init+0x0/0x1a @ 1 [ 0.881883] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.882005] initcall pci_hotplug_init+0x0/0x1a returned 0 after 117 usecs [ 0.882011] calling fb_console_init+0x0/0x10b @ 1 [ 0.882038] initcall fb_console_init+0x0/0x10b returned 0 after 21 usecs [ 0.882046] calling genericbl_driver_init+0x0/0xe @ 1 [ 0.882062] initcall genericbl_driver_init+0x0/0xe returned 0 after 11 usecs [ 0.882071] calling vesafb_driver_init+0x0/0xe @ 1 [ 0.882085] initcall vesafb_driver_init+0x0/0xe returned 0 after 9 usecs [ 0.882094] calling acpi_reserve_resources+0x0/0xea @ 1 [ 0.882100] initcall acpi_reserve_resources+0x0/0xea returned 0 after 2 usecs [ 0.882105] calling acpi_fan_driver_init+0x0/0xc @ 1 [ 0.882135] initcall acpi_fan_driver_init+0x0/0xc returned 0 after 25 usecs [ 0.882140] calling acpi_processor_driver_init+0x0/0x42 @ 1 [ 0.882587] Monitor-Mwait will be used to enter C-1 state [ 0.882594] Monitor-Mwait will be used to enter C-2 state [ 0.882599] ACPI: acpi_idle registered with cpuidle [ 0.883542] initcall acpi_processor_driver_init+0x0/0x42 returned 0 after 1361 usecs [ 0.883549] calling acpi_thermal_init+0x0/0x7e @ 1 [ 0.889207] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.889331] ACPI: Thermal Zone [TZ00] (45 C) [ 0.889478] initcall acpi_thermal_init+0x0/0x7e returned 0 after 5781 usecs [ 0.889485] calling pty_init+0x0/0x20a @ 1 [ 0.889555] initcall pty_init+0x0/0x20a returned 0 after 64 usecs [ 0.889560] calling serial8250_init+0x0/0x13c @ 1 [ 0.889562] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.890017] initcall serial8250_init+0x0/0x13c returned 0 after 442 usecs [ 0.890023] calling serial_pci_driver_init+0x0/0x15 @ 1 [ 0.890057] initcall serial_pci_driver_init+0x0/0x15 returned 0 after 29 usecs [ 0.890061] calling hpet_init+0x0/0x62 @ 1 [ 0.890223] initcall hpet_init+0x0/0x62 returned 0 after 153 usecs [ 0.890228] calling nvram_init+0x0/0x78 @ 1 [ 0.890263] Non-volatile memory driver v1.3 [ 0.890394] initcall nvram_init+0x0/0x78 returned 0 after 157 usecs [ 0.890398] calling mod_init+0x0/0x49 @ 1 [ 0.890402] initcall mod_init+0x0/0x49 returned -19 after 0 usecs [ 0.890406] calling agp_init+0x0/0x26 @ 1 [ 0.890408] Linux agpgart interface v0.103 [ 0.890524] initcall agp_init+0x0/0x26 returned 0 after 112 usecs [ 0.890529] calling agp_amd64_mod_init+0x0/0x1b @ 1 [ 0.890565] initcall agp_amd64_mod_init+0x0/0x1b returned -19 after 31 usecs [ 0.890570] calling agp_intel_init+0x0/0x24 @ 1 [ 0.890586] initcall agp_intel_init+0x0/0x24 returned 0 after 12 usecs [ 0.890591] calling agp_sis_init+0x0/0x24 @ 1 [ 0.890606] initcall agp_sis_init+0x0/0x24 returned 0 after 12 usecs [ 0.890611] calling agp_via_init+0x0/0x24 @ 1 [ 0.890627] initcall agp_via_init+0x0/0x24 returned 0 after 12 usecs [ 0.890632] calling cn_proc_init+0x0/0x33 @ 1 [ 0.890636] initcall cn_proc_init+0x0/0x33 returned 0 after 1 usecs [ 0.890642] calling topology_sysfs_init+0x0/0x6e @ 1 [ 0.890669] initcall topology_sysfs_init+0x0/0x6e returned 0 after 23 usecs [ 0.890674] calling brd_init+0x0/0x1bf @ 1 [ 0.892205] brd: module loaded [ 0.892322] initcall brd_init+0x0/0x1bf returned 0 after 1603 usecs [ 0.892328] calling mac_hid_init+0x0/0x1f @ 1 [ 0.892336] initcall mac_hid_init+0x0/0x1f returned 0 after 4 usecs [ 0.892341] calling scsi_tgt_init+0x0/0x83 @ 1 [ 0.892422] initcall scsi_tgt_init+0x0/0x83 returned 0 after 75 usecs [ 0.892430] calling raid_init+0x0/0xc @ 1 [ 0.892442] initcall raid_init+0x0/0xc returned 0 after 7 usecs [ 0.892449] calling spi_transport_init+0x0/0x74 @ 1 [ 0.892469] initcall spi_transport_init+0x0/0x74 returned 0 after 14 usecs [ 0.892476] calling fc_transport_init+0x0/0x8f @ 1 [ 0.892504] initcall fc_transport_init+0x0/0x8f returned 0 after 22 usecs [ 0.892510] calling iscsi_transport_init+0x0/0x1af @ 1 [ 0.892512] Loading iSCSI transport class v2.0-870. [ 0.892740] initcall iscsi_transport_init+0x0/0x1af returned 0 after 218 usecs [ 0.892748] calling sas_transport_init+0x0/0xd5 @ 1 [ 0.892795] initcall sas_transport_init+0x0/0xd5 returned 0 after 41 usecs [ 0.892801] calling sas_class_init+0x0/0x31 @ 1 [ 0.892812] initcall sas_class_init+0x0/0x31 returned 0 after 6 usecs [ 0.892818] calling srp_transport_init+0x0/0x3d @ 1 [ 0.892838] initcall srp_transport_init+0x0/0x3d returned 0 after 15 usecs [ 0.892843] calling iscsi_sw_tcp_init+0x0/0x3f @ 1 [ 0.892869] iscsi: registered transport (tcp) [ 0.893010] initcall iscsi_sw_tcp_init+0x0/0x3f returned 0 after 157 usecs [ 0.893016] calling blogic_init+0x0/0xfd5 @ 1 [ 0.893041] initcall blogic_init+0x0/0xfd5 returned 0 after 20 usecs [ 0.893049] calling arcmsr_module_init+0x0/0x15 @ 1 [ 0.893070] initcall arcmsr_module_init+0x0/0x15 returned 0 after 16 usecs [ 0.893078] calling ahc_linux_init+0x0/0x62 @ 1 [ 0.893102] initcall ahc_linux_init+0x0/0x62 returned 0 after 19 usecs [ 0.893109] calling ahd_linux_init+0x0/0x7c @ 1 [ 0.893136] initcall ahd_linux_init+0x0/0x7c returned 0 after 21 usecs [ 0.893143] calling aac_init+0x0/0x72 @ 1 [ 0.893146] Adaptec aacraid driver 1.2-0[30300]-ms [ 0.893284] initcall aac_init+0x0/0x72 returned 0 after 132 usecs [ 0.893291] calling aic94xx_init+0x0/0x139 @ 1 [ 0.893294] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 0.893462] initcall aic94xx_init+0x0/0x139 returned 0 after 162 usecs [ 0.893470] calling ips_module_init+0x0/0x18b @ 1 [ 0.893506] initcall ips_module_init+0x0/0x18b returned -19 after 29 usecs [ 0.893513] calling qla1280_init+0x0/0x15 @ 1 [ 0.893536] initcall qla1280_init+0x0/0x15 returned 0 after 17 usecs [ 0.893543] calling qla2x00_module_init+0x0/0x202 @ 1 [ 0.893559] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.08-k. [ 0.893767] initcall qla2x00_module_init+0x0/0x202 returned 0 after 213 usecs [ 0.893775] calling qla4xxx_module_init+0x0/0xda @ 1 [ 0.893799] iscsi: registered transport (qla4xxx) [ 0.893935] QLogic iSCSI HBA Driver [ 0.894055] initcall qla4xxx_module_init+0x0/0xda returned 0 after 269 usecs [ 0.894061] calling sym2_init+0x0/0xfe @ 1 [ 0.894079] initcall sym2_init+0x0/0xfe returned 0 after 14 usecs [ 0.894087] calling dc395x_module_init+0x0/0x15 @ 1 [ 0.894107] initcall dc395x_module_init+0x0/0x15 returned 0 after 15 usecs [ 0.894114] calling dc390_module_init+0x0/0x95 @ 1 [ 0.894117] DC390: clustering now enabled by default. If you get problems load [ 0.894307] with "disable_clustering=1" and report to maintainers [ 0.894460] initcall dc390_module_init+0x0/0x95 returned 0 after 332 usecs [ 0.894468] calling atp870u_init+0x0/0x15 @ 1 [ 0.894487] initcall atp870u_init+0x0/0x15 returned 0 after 14 usecs [ 0.894494] calling gdth_init+0x0/0xe6 @ 1 [ 0.894496] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 0.894636] initcall gdth_init+0x0/0xe6 returned 0 after 133 usecs [ 0.894644] calling initio_init_driver+0x0/0x15 @ 1 [ 0.894662] initcall initio_init_driver+0x0/0x15 returned 0 after 13 usecs [ 0.894669] calling inia100_init+0x0/0x15 @ 1 [ 0.894691] initcall inia100_init+0x0/0x15 returned 0 after 16 usecs [ 0.894698] calling hptiop_module_init+0x0/0x33 @ 1 [ 0.894702] RocketRAID 3xxx/4xxx Controller driver v1.8 [ 0.894836] initcall hptiop_module_init+0x0/0x33 returned 0 after 129 usecs [ 0.894842] calling stex_init+0x0/0x2c @ 1 [ 0.894845] stex: Promise SuperTrak EX Driver version: 4.6.0000.4 [ 0.894984] initcall stex_init+0x0/0x2c returned 0 after 132 usecs [ 0.894991] calling mvs_init+0x0/0xa2 @ 1 [ 0.895020] initcall mvs_init+0x0/0xa2 returned 0 after 23 usecs [ 0.895027] calling init_st+0x0/0x169 @ 1 [ 0.895030] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 0.895175] initcall init_st+0x0/0x169 returned 0 after 140 usecs [ 0.895182] calling init_osst+0x0/0x140 @ 1 [ 0.895185] osst :I: Tape driver with OnStream support version 0.99.4 osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 0.895423] initcall init_osst+0x0/0x140 returned 0 after 230 usecs [ 0.895429] calling init_sd+0x0/0x157 @ 1 [ 0.895459] initcall init_sd+0x0/0x157 returned 0 after 25 usecs [ 0.895466] calling init_sr+0x0/0x47 @ 1 [ 0.895479] initcall init_sr+0x0/0x47 returned 0 after 8 usecs [ 0.895486] calling init_sg+0x0/0x121 @ 1 [ 0.895508] initcall init_sg+0x0/0x121 returned 0 after 17 usecs [ 0.895515] calling init_ch_module+0x0/0xad @ 1 [ 0.895517] SCSI Media Changer driver v0.25 [ 0.895656] initcall init_ch_module+0x0/0xad returned 0 after 133 usecs [ 0.895663] calling ahci_pci_driver_init+0x0/0x15 @ 1 [ 0.895685] ahci 0000:00:1f.2: version 3.0 [ 0.895819] ahci 0000:00:1f.2: irq 59 for MSI/MSI-X [ 0.906427] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x3 impl SATA mode [ 0.906621] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 0.907290] scsi0 : ahci [ 0.907526] scsi1 : ahci [ 0.907737] scsi2 : ahci [ 0.907901] ata1: SATA max UDMA/133 abar m2048@0xb251b000 port 0xb251b100 irq 59 [ 0.908092] ata2: SATA max UDMA/133 abar m2048@0xb251b000 port 0xb251b180 irq 59 [ 0.908280] ata3: DUMMY [ 0.908412] calling 1_async_port_probe+0x0/0x48 @ 6 [ 0.908419] initcall ahci_pci_driver_init+0x0/0x15 returned 0 after 12446 usecs [ 0.908426] calling inic_pci_driver_init+0x0/0x15 @ 1 [ 0.908432] calling 2_async_port_probe+0x0/0x48 @ 24 [ 0.908455] initcall inic_pci_driver_init+0x0/0x15 returned 0 after 18 usecs [ 0.908460] calling 3_async_port_probe+0x0/0x48 @ 1015 [ 0.908468] calling sil24_pci_driver_init+0x0/0x15 @ 1 [ 0.908475] async_waiting @ 1015 [ 0.908493] initcall sil24_pci_driver_init+0x0/0x15 returned 0 after 19 usecs [ 0.908502] calling qs_ata_pci_driver_init+0x0/0x15 @ 1 [ 0.908530] initcall qs_ata_pci_driver_init+0x0/0x15 returned 0 after 22 usecs [ 0.908539] calling pdc_sata_pci_driver_init+0x0/0x15 @ 1 [ 0.908564] initcall pdc_sata_pci_driver_init+0x0/0x15 returned 0 after 20 usecs [ 0.908572] calling piix_init+0x0/0x26 @ 1 [ 0.908600] initcall piix_init+0x0/0x26 returned 0 after 23 usecs [ 0.908606] calling mv_init+0x0/0x48 @ 1 [ 0.908645] initcall mv_init+0x0/0x48 returned 0 after 32 usecs [ 0.908653] calling nv_pci_driver_init+0x0/0x15 @ 1 [ 0.908679] initcall nv_pci_driver_init+0x0/0x15 returned 0 after 21 usecs [ 0.908686] calling pdc_ata_pci_driver_init+0x0/0x15 @ 1 [ 0.908710] initcall pdc_ata_pci_driver_init+0x0/0x15 returned 0 after 19 usecs [ 0.908717] calling sil_pci_driver_init+0x0/0x15 @ 1 [ 0.908741] initcall sil_pci_driver_init+0x0/0x15 returned 0 after 19 usecs [ 0.908748] calling sis_pci_driver_init+0x0/0x15 @ 1 [ 0.908772] initcall sis_pci_driver_init+0x0/0x15 returned 0 after 20 usecs [ 0.908779] calling k2_sata_pci_driver_init+0x0/0x15 @ 1 [ 0.908803] initcall k2_sata_pci_driver_init+0x0/0x15 returned 0 after 19 usecs [ 0.908810] calling uli_pci_driver_init+0x0/0x15 @ 1 [ 0.908833] initcall uli_pci_driver_init+0x0/0x15 returned 0 after 19 usecs [ 0.908840] calling svia_pci_driver_init+0x0/0x15 @ 1 [ 0.908864] initcall svia_pci_driver_init+0x0/0x15 returned 0 after 19 usecs [ 0.908871] calling vsc_sata_pci_driver_init+0x0/0x15 @ 1 [ 0.908896] initcall vsc_sata_pci_driver_init+0x0/0x15 returned 0 after 19 usecs [ 0.908903] calling ali_init+0x0/0x4e @ 1 [ 0.908928] initcall ali_init+0x0/0x4e returned 0 after 20 usecs [ 0.908935] calling amd_pci_driver_init+0x0/0x15 @ 1 [ 0.908959] initcall amd_pci_driver_init+0x0/0x15 returned 0 after 19 usecs [ 0.908966] calling artop_pci_driver_init+0x0/0x15 @ 1 [ 0.908990] initcall artop_pci_driver_init+0x0/0x15 returned 0 after 19 usecs [ 0.908997] calling atiixp_pci_driver_init+0x0/0x15 @ 1 [ 0.909023] initcall atiixp_pci_driver_init+0x0/0x15 returned 0 after 20 usecs [ 0.909030] calling atp867x_driver_init+0x0/0x15 @ 1 [ 0.909054] initcall atp867x_driver_init+0x0/0x15 returned 0 after 19 usecs [ 0.909060] calling cmd64x_pci_driver_init+0x0/0x15 @ 1 [ 0.909085] initcall cmd64x_pci_driver_init+0x0/0x15 returned 0 after 19 usecs [ 0.909092] calling cy82c693_pci_driver_init+0x0/0x15 @ 1 [ 0.909117] initcall cy82c693_pci_driver_init+0x0/0x15 returned 0 after 20 usecs [ 0.909124] calling efar_pci_driver_init+0x0/0x15 @ 1 [ 0.909148] initcall efar_pci_driver_init+0x0/0x15 returned 0 after 19 usecs [ 0.909155] calling hpt36x_pci_driver_init+0x0/0x15 @ 1 [ 0.909179] initcall hpt36x_pci_driver_init+0x0/0x15 returned 0 after 19 usecs [ 0.909186] calling hpt37x_pci_driver_init+0x0/0x15 @ 1 [ 0.909209] initcall hpt37x_pci_driver_init+0x0/0x15 returned 0 after 19 usecs [ 0.909216] calling hpt3x2n_pci_driver_init+0x0/0x15 @ 1 [ 0.909242] initcall hpt3x2n_pci_driver_init+0x0/0x15 returned 0 after 20 usecs [ 0.909249] calling hpt3x3_pci_driver_init+0x0/0x15 @ 1 [ 0.909273] initcall hpt3x3_pci_driver_init+0x0/0x15 returned 0 after 19 usecs [ 0.909280] calling it8213_pci_driver_init+0x0/0x15 @ 1 [ 0.909304] initcall it8213_pci_driver_init+0x0/0x15 returned 0 after 18 usecs [ 0.909311] calling it821x_pci_driver_init+0x0/0x15 @ 1 [ 0.909335] initcall it821x_pci_driver_init+0x0/0x15 returned 0 after 19 usecs [ 0.909342] calling jmicron_pci_driver_init+0x0/0x15 @ 1 [ 0.909367] initcall jmicron_pci_driver_init+0x0/0x15 returned 0 after 20 usecs [ 0.909374] calling marvell_pci_driver_init+0x0/0x15 @ 1 [ 0.909408] initcall marvell_pci_driver_init+0x0/0x15 returned 0 after 21 usecs [ 0.909415] calling netcell_pci_driver_init+0x0/0x15 @ 1 [ 0.909440] initcall netcell_pci_driver_init+0x0/0x15 returned 0 after 19 usecs [ 0.909447] calling ninja32_pci_driver_init+0x0/0x15 @ 1 [ 0.909471] initcall ninja32_pci_driver_init+0x0/0x15 returned 0 after 19 usecs [ 0.909478] calling ns87415_pci_driver_init+0x0/0x15 @ 1 [ 0.909504] initcall ns87415_pci_driver_init+0x0/0x15 returned 0 after 20 usecs [ 0.909511] calling oldpiix_pci_driver_init+0x0/0x15 @ 1 [ 0.909535] initcall oldpiix_pci_driver_init+0x0/0x15 returned 0 after 19 usecs [ 0.909543] calling optidma_pci_driver_init+0x0/0x15 @ 1 [ 0.909567] initcall optidma_pci_driver_init+0x0/0x15 returned 0 after 19 usecs [ 0.909574] calling pdc2027x_pci_driver_init+0x0/0x15 @ 1 [ 0.909599] initcall pdc2027x_pci_driver_init+0x0/0x15 returned 0 after 19 usecs [ 0.909606] calling pdc202xx_pci_driver_init+0x0/0x15 @ 1 [ 0.909635] initcall pdc202xx_pci_driver_init+0x0/0x15 returned 0 after 23 usecs [ 0.909643] calling serverworks_pci_driver_init+0x0/0x15 @ 1 [ 0.909667] initcall serverworks_pci_driver_init+0x0/0x15 returned 0 after 19 usecs [ 0.909674] calling sil680_pci_driver_init+0x0/0x15 @ 1 [ 0.909698] initcall sil680_pci_driver_init+0x0/0x15 returned 0 after 19 usecs [ 0.909706] calling sis_pci_driver_init+0x0/0x15 @ 1 [ 0.909732] initcall sis_pci_driver_init+0x0/0x15 returned 0 after 21 usecs [ 0.909739] calling triflex_pci_driver_init+0x0/0x15 @ 1 [ 0.909764] initcall triflex_pci_driver_init+0x0/0x15 returned 0 after 19 usecs [ 0.909771] calling via_pci_driver_init+0x0/0x15 @ 1 [ 0.909796] initcall via_pci_driver_init+0x0/0x15 returned 0 after 19 usecs [ 0.909803] calling sl82c105_pci_driver_init+0x0/0x15 @ 1 [ 0.909827] initcall sl82c105_pci_driver_init+0x0/0x15 returned 0 after 19 usecs [ 0.909835] calling cmd640_pci_driver_init+0x0/0x15 @ 1 [ 0.909861] initcall cmd640_pci_driver_init+0x0/0x15 returned 0 after 21 usecs [ 0.909868] calling mpiix_pci_driver_init+0x0/0x15 @ 1 [ 0.909892] initcall mpiix_pci_driver_init+0x0/0x15 returned 0 after 19 usecs [ 0.909900] calling ns87410_pci_driver_init+0x0/0x15 @ 1 [ 0.909924] initcall ns87410_pci_driver_init+0x0/0x15 returned 0 after 19 usecs [ 0.909931] calling opti_pci_driver_init+0x0/0x15 @ 1 [ 0.909955] initcall opti_pci_driver_init+0x0/0x15 returned 0 after 19 usecs [ 0.909963] calling pcmcia_driver_init+0x0/0xc @ 1 [ 0.909994] initcall pcmcia_driver_init+0x0/0xc returned 0 after 26 usecs [ 0.910002] calling pacpi_pci_driver_init+0x0/0x15 @ 1 [ 0.910026] initcall pacpi_pci_driver_init+0x0/0x15 returned 0 after 19 usecs [ 0.910035] calling ata_generic_pci_driver_init+0x0/0x15 @ 1 [ 0.910059] initcall ata_generic_pci_driver_init+0x0/0x15 returned 0 after 19 usecs [ 0.910066] calling net_olddevs_init+0x0/0x53 @ 1 [ 0.910076] initcall net_olddevs_init+0x0/0x53 returned 0 after 4 usecs [ 0.910084] calling b44_init+0x0/0x49 @ 1 [ 0.910111] initcall b44_init+0x0/0x49 returned 0 after 22 usecs [ 0.910120] calling bnx2_pci_driver_init+0x0/0x15 @ 1 [ 0.910150] initcall bnx2_pci_driver_init+0x0/0x15 returned 0 after 24 usecs [ 0.910157] calling cnic_init+0x0/0x79 @ 1 [ 0.910159] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.20 (March 14, 2014) [ 0.910394] initcall cnic_init+0x0/0x79 returned 0 after 225 usecs [ 0.910402] calling bnx2x_init+0x0/0xe8 @ 1 [ 0.910404] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.19-0 (2014/02/10) [ 0.910666] initcall bnx2x_init+0x0/0xe8 returned 0 after 253 usecs [ 0.910674] calling tg3_driver_init+0x0/0x15 @ 1 [ 0.910702] initcall tg3_driver_init+0x0/0x15 returned 0 after 22 usecs [ 0.910709] calling e100_init_module+0x0/0x5b @ 1 [ 0.910712] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 0.910834] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.910973] initcall e100_init_module+0x0/0x5b returned 0 after 252 usecs [ 0.910980] calling e1000_init_module+0x0/0x7d @ 1 [ 0.910983] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 0.911108] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.911250] initcall e1000_init_module+0x0/0x7d returned 0 after 258 usecs [ 0.911257] calling e1000_init_module+0x0/0x3a @ 1 [ 0.911259] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 0.911390] e1000e: Copyright(c) 1999 - 2014 Intel Corporation. [ 0.911531] initcall e1000_init_module+0x0/0x3a returned 0 after 263 usecs [ 0.911535] calling igb_init_module+0x0/0x48 @ 1 [ 0.911537] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k [ 0.911662] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.911798] initcall igb_init_module+0x0/0x48 returned 0 after 254 usecs [ 0.911802] calling catc_driver_init+0x0/0x15 @ 1 [ 0.911818] usbcore: registered new interface driver catc [ 0.911944] initcall catc_driver_init+0x0/0x15 returned 0 after 136 usecs [ 0.911947] calling kaweth_driver_init+0x0/0x15 @ 1 [ 0.911962] usbcore: registered new interface driver kaweth [ 0.912086] initcall kaweth_driver_init+0x0/0x15 returned 0 after 132 usecs [ 0.912089] calling pegasus_init+0x0/0x16a @ 1 [ 0.912091] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 0.912290] usbcore: registered new interface driver pegasus [ 0.912425] initcall pegasus_init+0x0/0x16a returned 0 after 325 usecs [ 0.912429] calling rtl8150_driver_init+0x0/0x15 @ 1 [ 0.912440] usbcore: registered new interface driver rtl8150 [ 0.912563] initcall rtl8150_driver_init+0x0/0x15 returned 0 after 128 usecs [ 0.912566] calling asix_driver_init+0x0/0x15 @ 1 [ 0.912580] usbcore: registered new interface driver asix [ 0.912702] initcall asix_driver_init+0x0/0x15 returned 0 after 130 usecs [ 0.912705] calling ax88179_178a_driver_init+0x0/0x15 @ 1 [ 0.912717] usbcore: registered new interface driver ax88179_178a [ 0.912841] initcall ax88179_178a_driver_init+0x0/0x15 returned 0 after 129 usecs [ 0.912844] calling cdc_driver_init+0x0/0x15 @ 1 [ 0.912857] usbcore: registered new interface driver cdc_ether [ 0.912980] initcall cdc_driver_init+0x0/0x15 returned 0 after 130 usecs [ 0.912983] calling dm9601_driver_init+0x0/0x15 @ 1 [ 0.912994] usbcore: registered new interface driver dm9601 [ 0.913116] initcall dm9601_driver_init+0x0/0x15 returned 0 after 127 usecs [ 0.913120] calling gl620a_driver_init+0x0/0x15 @ 1 [ 0.913130] usbcore: registered new interface driver gl620a [ 0.913253] initcall gl620a_driver_init+0x0/0x15 returned 0 after 127 usecs [ 0.913256] calling net1080_driver_init+0x0/0x15 @ 1 [ 0.913270] usbcore: registered new interface driver net1080 [ 0.913403] initcall net1080_driver_init+0x0/0x15 returned 0 after 140 usecs [ 0.913406] calling plusb_driver_init+0x0/0x15 @ 1 [ 0.913417] usbcore: registered new interface driver plusb [ 0.913540] initcall plusb_driver_init+0x0/0x15 returned 0 after 128 usecs [ 0.913543] calling rndis_driver_init+0x0/0x15 @ 1 [ 0.913554] usbcore: registered new interface driver rndis_host [ 0.913678] initcall rndis_driver_init+0x0/0x15 returned 0 after 128 usecs [ 0.913681] calling cdc_subset_driver_init+0x0/0x15 @ 1 [ 0.913694] usbcore: registered new interface driver cdc_subset [ 0.913818] initcall cdc_subset_driver_init+0x0/0x15 returned 0 after 130 usecs [ 0.913821] calling zaurus_driver_init+0x0/0x15 @ 1 [ 0.913832] usbcore: registered new interface driver zaurus [ 0.913955] initcall zaurus_driver_init+0x0/0x15 returned 0 after 127 usecs [ 0.913958] calling mcs7830_driver_init+0x0/0x15 @ 1 [ 0.913970] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 0.914163] initcall mcs7830_driver_init+0x0/0x15 returned 0 after 197 usecs [ 0.914166] calling usbnet_init+0x0/0x28 @ 1 [ 0.914172] initcall usbnet_init+0x0/0x28 returned 0 after 3 usecs [ 0.914175] calling cdc_ncm_driver_init+0x0/0x15 @ 1 [ 0.914189] usbcore: registered new interface driver cdc_ncm [ 0.914312] initcall cdc_ncm_driver_init+0x0/0x15 returned 0 after 131 usecs [ 0.914315] calling uio_init+0x0/0xe8 @ 1 [ 0.914325] initcall uio_init+0x0/0xe8 returned 0 after 6 usecs [ 0.914328] calling cdrom_init+0x0/0x18 @ 1 [ 0.914336] initcall cdrom_init+0x0/0x18 returned 0 after 5 usecs [ 0.914340] calling nonstatic_sysfs_init+0x0/0xc @ 1 [ 0.914343] initcall nonstatic_sysfs_init+0x0/0xc returned 0 after 0 usecs [ 0.914347] calling yenta_cardbus_driver_init+0x0/0x15 @ 1 [ 0.914369] initcall yenta_cardbus_driver_init+0x0/0x15 returned 0 after 19 usecs [ 0.914373] calling mon_init+0x0/0xf4 @ 1 [ 0.914436] initcall mon_init+0x0/0xf4 returned 0 after 58 usecs [ 0.914439] calling ehci_hcd_init+0x0/0x56 @ 1 [ 0.914442] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.914566] initcall ehci_hcd_init+0x0/0x56 returned 0 after 120 usecs [ 0.914569] calling ehci_pci_init+0x0/0x63 @ 1 [ 0.914571] ehci-pci: EHCI PCI platform driver [ 0.914814] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.914973] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 0.915176] ehci-pci 0000:00:1d.0: debug port 2 [ 0.919180] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.919198] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb251c000 [ 0.924425] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.924582] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.924704] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.924894] usb usb1: Product: EHCI Host Controller [ 0.925011] usb usb1: Manufacturer: Linux 3.16.0_drm-intel-fixes_be71ea_20140813+ ehci_hcd [ 0.925202] usb usb1: SerialNumber: 0000:00:1d.0 [ 0.925472] hub 1-0:1.0: USB hub found [ 0.925603] hub 1-0:1.0: 2 ports detected [ 0.925854] initcall ehci_pci_init+0x0/0x63 returned 0 after 11011 usecs [ 0.925859] calling isp116x_driver_init+0x0/0xe @ 1 [ 0.925872] initcall isp116x_driver_init+0x0/0xe returned 0 after 9 usecs [ 0.925876] calling ohci_hcd_mod_init+0x0/0x5c @ 1 [ 0.925878] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.926009] initcall ohci_hcd_mod_init+0x0/0x5c returned 0 after 127 usecs [ 0.926013] calling ohci_pci_init+0x0/0x65 @ 1 [ 0.926015] ohci-pci: OHCI PCI platform driver [ 0.926145] initcall ohci_pci_init+0x0/0x65 returned 0 after 126 usecs [ 0.926149] calling uhci_hcd_init+0x0/0xa4 @ 1 [ 0.926151] uhci_hcd: USB Universal Host Controller Interface driver [ 0.926295] initcall uhci_hcd_init+0x0/0xa4 returned 0 after 140 usecs [ 0.926299] calling xhci_hcd_init+0x0/0x12 @ 1 [ 0.926415] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.926582] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.926850] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.926868] xhci_hcd 0000:00:14.0: irq 60 for MSI/MSI-X [ 0.926923] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.927046] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.927235] usb usb2: Product: xHCI Host Controller [ 0.927352] usb usb2: Manufacturer: Linux 3.16.0_drm-intel-fixes_be71ea_20140813+ xhci_hcd [ 0.927555] usb usb2: SerialNumber: 0000:00:14.0 [ 0.927786] hub 2-0:1.0: USB hub found [ 0.927911] hub 2-0:1.0: 9 ports detected [ 0.929420] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.929601] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.929827] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.929950] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.930140] usb usb3: Product: xHCI Host Controller [ 0.930258] usb usb3: Manufacturer: Linux 3.16.0_drm-intel-fixes_be71ea_20140813+ xhci_hcd [ 0.930460] usb usb3: SerialNumber: 0000:00:14.0 [ 0.930712] hub 3-0:1.0: USB hub found [ 0.930837] hub 3-0:1.0: 4 ports detected [ 0.931586] initcall xhci_hcd_init+0x0/0x12 returned 0 after 5156 usecs [ 0.931592] calling usb_storage_driver_init+0x0/0x15 @ 1 [ 0.931617] usbcore: registered new interface driver usb-storage [ 0.931744] initcall usb_storage_driver_init+0x0/0x15 returned 0 after 145 usecs [ 0.931749] calling i8042_init+0x0/0x3df @ 1 [ 0.931792] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2D] at 0x60,0x64 irq 1,12 [ 0.959315] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.959447] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.959627] initcall i8042_init+0x0/0x3df returned 0 after 27210 usecs [ 0.959632] calling serport_init+0x0/0x2a @ 1 [ 0.959635] initcall serport_init+0x0/0x2a returned 0 after 0 usecs [ 0.959639] calling mousedev_init+0x0/0x57 @ 1 [ 0.959701] mousedev: PS/2 mouse device common for all mice [ 0.959829] initcall mousedev_init+0x0/0x57 returned 0 after 181 usecs [ 0.959833] calling evdev_init+0x0/0xc @ 1 [ 0.959836] initcall evdev_init+0x0/0xc returned 0 after 0 usecs [ 0.959840] calling atkbd_init+0x0/0x23 @ 1 [ 0.959863] initcall atkbd_init+0x0/0x23 returned 0 after 18 usecs [ 0.959883] calling psmouse_init+0x0/0x83 @ 1 [ 0.959937] initcall psmouse_init+0x0/0x83 returned 0 after 49 usecs [ 0.959943] calling cmos_init+0x0/0x6d @ 1 [ 0.959962] rtc_cmos 00:01: RTC can wake from S4 [ 0.960228] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 0.960379] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.960592] initcall cmos_init+0x0/0x6d returned 0 after 629 usecs [ 0.960598] calling i2c_dev_init+0x0/0xc8 @ 1 [ 0.960601] i2c /dev entries driver [ 0.960728] initcall i2c_dev_init+0x0/0xc8 returned 0 after 122 usecs [ 0.960736] calling efivars_sysfs_init+0x0/0x1fc @ 1 [ 0.960741] initcall efivars_sysfs_init+0x0/0x1fc returned -19 after 0 usecs [ 0.960747] calling hid_init+0x0/0x5c @ 1 [ 0.960773] hidraw: raw HID events driver (C) Jiri Kosina [ 0.960905] initcall hid_init+0x0/0x5c returned 0 after 150 usecs [ 0.960911] calling hid_generic_init+0x0/0x15 @ 1 [ 0.960927] initcall hid_generic_init+0x0/0x15 returned 0 after 11 usecs [ 0.960934] calling a4_driver_init+0x0/0x15 @ 1 [ 0.960950] initcall a4_driver_init+0x0/0x15 returned 0 after 11 usecs [ 0.960957] calling apple_driver_init+0x0/0x15 @ 1 [ 0.960979] initcall apple_driver_init+0x0/0x15 returned 0 after 17 usecs [ 0.960986] calling belkin_driver_init+0x0/0x15 @ 1 [ 0.961003] initcall belkin_driver_init+0x0/0x15 returned 0 after 11 usecs [ 0.961009] calling ch_driver_init+0x0/0x15 @ 1 [ 0.961026] initcall ch_driver_init+0x0/0x15 returned 0 after 11 usecs [ 0.961032] calling ch_driver_init+0x0/0x15 @ 1 [ 0.961050] initcall ch_driver_init+0x0/0x15 returned 0 after 13 usecs [ 0.961056] calling cp_driver_init+0x0/0x15 @ 1 [ 0.961073] initcall cp_driver_init+0x0/0x15 returned 0 after 11 usecs [ 0.961079] calling ez_driver_init+0x0/0x15 @ 1 [ 0.961096] initcall ez_driver_init+0x0/0x15 returned 0 after 11 usecs [ 0.961103] calling gyration_driver_init+0x0/0x15 @ 1 [ 0.961119] initcall gyration_driver_init+0x0/0x15 returned 0 after 11 usecs [ 0.961126] calling ks_driver_init+0x0/0x15 @ 1 [ 0.961142] initcall ks_driver_init+0x0/0x15 returned 0 after 11 usecs [ 0.961148] calling lg_driver_init+0x0/0x15 @ 1 [ 0.961165] initcall lg_driver_init+0x0/0x15 returned 0 after 11 usecs [ 0.961171] calling ms_driver_init+0x0/0x15 @ 1 [ 0.961189] initcall ms_driver_init+0x0/0x15 returned 0 after 12 usecs [ 0.961195] calling mr_driver_init+0x0/0x15 @ 1 [ 0.961213] initcall mr_driver_init+0x0/0x15 returned 0 after 13 usecs [ 0.961219] calling ntrig_driver_init+0x0/0x15 @ 1 [ 0.961241] initcall ntrig_driver_init+0x0/0x15 returned 0 after 16 usecs [ 0.961247] calling pl_driver_init+0x0/0x15 @ 1 [ 0.961263] initcall pl_driver_init+0x0/0x15 returned 0 after 11 usecs [ 0.961270] calling pl_driver_init+0x0/0x15 @ 1 [ 0.961287] initcall pl_driver_init+0x0/0x15 returned 0 after 11 usecs [ 0.961293] calling samsung_driver_init+0x0/0x15 @ 1 [ 0.961309] initcall samsung_driver_init+0x0/0x15 returned 0 after 11 usecs [ 0.961316] calling sony_init+0x0/0x3c @ 1 [ 0.961333] initcall sony_init+0x0/0x3c returned 0 after 11 usecs [ 0.961339] calling sp_driver_init+0x0/0x15 @ 1 [ 0.961357] initcall sp_driver_init+0x0/0x15 returned 0 after 13 usecs [ 0.961364] calling ts_driver_init+0x0/0x15 @ 1 [ 0.961381] initcall ts_driver_init+0x0/0x15 returned 0 after 11 usecs [ 0.961387] calling hid_init+0x0/0x47 @ 1 [ 0.961420] usbcore: registered new interface driver usbhid [ 0.961544] usbhid: USB HID core driver [ 0.961661] initcall hid_init+0x0/0x47 returned 0 after 263 usecs [ 0.961667] calling sock_diag_init+0x0/0xc @ 1 [ 0.961675] initcall sock_diag_init+0x0/0xc returned 0 after 4 usecs [ 0.961682] calling blackhole_module_init+0x0/0xc @ 1 [ 0.961687] initcall blackhole_module_init+0x0/0xc returned 0 after 1 usecs [ 0.961692] calling gre_offload_init+0x0/0x11 @ 1 [ 0.961695] initcall gre_offload_init+0x0/0x11 returned 0 after 0 usecs [ 0.961699] calling sysctl_ipv4_init+0x0/0x46 @ 1 [ 0.961763] initcall sysctl_ipv4_init+0x0/0x46 returned 0 after 60 usecs [ 0.961767] calling ipv4_netfilter_init+0x0/0xc @ 1 [ 0.961771] initcall ipv4_netfilter_init+0x0/0xc returned 0 after 0 usecs [ 0.961775] calling cubictcp_register+0x0/0x53 @ 1 [ 0.961776] TCP: cubic registered [ 0.961891] initcall cubictcp_register+0x0/0x53 returned 0 after 110 usecs [ 0.961895] calling xfrm_user_init+0x0/0x4b @ 1 [ 0.961897] Initializing XFRM netlink socket [ 0.962015] initcall xfrm_user_init+0x0/0x4b returned 0 after 114 usecs [ 0.962019] calling packet_init+0x0/0x3d @ 1 [ 0.962021] NET: Registered protocol family 17 [ 0.962144] initcall packet_init+0x0/0x3d returned 0 after 118 usecs [ 0.962148] calling init_rpcsec_gss+0x0/0x5a @ 1 [ 0.962160] initcall init_rpcsec_gss+0x0/0x5a returned 0 after 8 usecs [ 0.962165] calling init_dns_resolver+0x0/0xde @ 1 [ 0.962179] Key type dns_resolver registered [ 0.962296] initcall init_dns_resolver+0x0/0xde returned 0 after 124 usecs [ 0.962302] calling mcheck_init_device+0x0/0x15c @ 1 [ 0.962513] initcall mcheck_init_device+0x0/0x15c returned 0 after 201 usecs [ 0.962640] calling mcheck_debugfs_init+0x0/0x38 @ 1 [ 0.962648] initcall mcheck_debugfs_init+0x0/0x38 returned 0 after 4 usecs [ 0.962653] calling severities_debugfs_init+0x0/0x3a @ 1 [ 0.962658] initcall severities_debugfs_init+0x0/0x3a returned 0 after 1 usecs [ 0.962663] calling threshold_init_device+0x0/0x40 @ 1 [ 0.962667] initcall threshold_init_device+0x0/0x40 returned 0 after 1 usecs [ 0.962674] calling hpet_insert_resource+0x0/0x1e @ 1 [ 0.962678] initcall hpet_insert_resource+0x0/0x1e returned 0 after 1 usecs [ 0.962685] calling update_mp_table+0x0/0x436 @ 1 [ 0.962690] initcall update_mp_table+0x0/0x436 returned 0 after 0 usecs [ 0.962697] calling lapic_insert_resource+0x0/0x3e @ 1 [ 0.962701] initcall lapic_insert_resource+0x0/0x3e returned 0 after 0 usecs [ 0.962705] calling io_apic_bug_finalize+0x0/0x16 @ 1 [ 0.962708] initcall io_apic_bug_finalize+0x0/0x16 returned 0 after 0 usecs [ 0.962711] calling print_ICs+0x0/0x423 @ 1 [ 0.962714] initcall print_ICs+0x0/0x423 returned 0 after 0 usecs [ 0.962719] calling pat_memtype_list_init+0x0/0x34 @ 1 [ 0.962724] initcall pat_memtype_list_init+0x0/0x34 returned 0 after 1 usecs [ 0.962730] calling init_oops_id+0x0/0x31 @ 1 [ 0.962736] initcall init_oops_id+0x0/0x31 returned 0 after 2 usecs [ 0.962744] calling pm_qos_power_init+0x0/0x5a @ 1 [ 0.962846] initcall pm_qos_power_init+0x0/0x5a returned 0 after 95 usecs [ 0.962853] calling pm_debugfs_init+0x0/0x21 @ 1 [ 0.962859] initcall pm_debugfs_init+0x0/0x21 returned 0 after 1 usecs [ 0.962863] calling printk_late_init+0x0/0x3a @ 1 [ 0.962867] initcall printk_late_init+0x0/0x3a returned 0 after 1 usecs [ 0.962871] calling tk_debug_sleep_time_init+0x0/0x39 @ 1 [ 0.962875] initcall tk_debug_sleep_time_init+0x0/0x39 returned 0 after 1 usecs [ 0.962880] calling debugfs_kprobe_init+0x0/0xa5 @ 1 [ 0.962887] initcall debugfs_kprobe_init+0x0/0xa5 returned 0 after 4 usecs [ 0.962892] calling taskstats_init+0x0/0x69 @ 1 [ 0.962901] registered taskstats version 1 [ 0.963018] initcall taskstats_init+0x0/0x69 returned 0 after 120 usecs [ 0.963022] calling clear_boot_tracer+0x0/0x2d @ 1 [ 0.963025] initcall clear_boot_tracer+0x0/0x2d returned 0 after 0 usecs [ 0.963032] calling fault_around_debugfs+0x0/0x32 @ 1 [ 0.963038] initcall fault_around_debugfs+0x0/0x32 returned 0 after 1 usecs [ 0.963045] calling max_swapfiles_check+0x0/0x3 @ 1 [ 0.963049] initcall max_swapfiles_check+0x0/0x3 returned 0 after 0 usecs [ 0.963053] calling check_early_ioremap_leak+0x0/0x3f @ 1 [ 0.963056] initcall check_early_ioremap_leak+0x0/0x3f returned 0 after 0 usecs [ 0.963061] calling init_btrfs_fs+0x0/0xff @ 1 [ 0.963557] Btrfs loaded [ 0.963681] initcall init_btrfs_fs+0x0/0xff returned 0 after 601 usecs [ 0.963686] calling init_root_keyring+0x0/0x5 @ 1 [ 0.963700] initcall init_root_keyring+0x0/0x5 returned 0 after 10 usecs [ 0.963706] calling prandom_reseed+0x0/0x44 @ 1 [ 0.963738] initcall prandom_reseed+0x0/0x44 returned 0 after 27 usecs [ 0.963745] calling pci_resource_alignment_sysfs_init+0x0/0x17 @ 1 [ 0.963751] initcall pci_resource_alignment_sysfs_init+0x0/0x17 returned 0 after 1 usecs [ 0.963756] calling pci_sysfs_init+0x0/0x4e @ 1 [ 0.964055] initcall pci_sysfs_init+0x0/0x4e returned 0 after 287 usecs [ 0.964063] calling deferred_probe_initcall+0x0/0x65 @ 1 [ 0.964104] initcall deferred_probe_initcall+0x0/0x65 returned 0 after 36 usecs [ 0.964109] calling late_resume_init+0x0/0xde @ 1 [ 0.964112] Magic number: 10:791:849 [ 0.964239] graphics fbcon: hash matches [ 0.964396] initcall late_resume_init+0x0/0xde returned 0 after 276 usecs [ 0.964415] calling firmware_memmap_init+0x0/0x2a @ 1 [ 0.964485] initcall firmware_memmap_init+0x0/0x2a returned 0 after 64 usecs [ 0.964491] calling pci_mmcfg_late_insert_resources+0x0/0x46 @ 1 [ 0.964496] initcall pci_mmcfg_late_insert_resources+0x0/0x46 returned 0 after 1 usecs [ 0.964500] calling tcp_congestion_default+0x0/0xc @ 1 [ 0.964503] initcall tcp_congestion_default+0x0/0xc returned 0 after 0 usecs [ 0.964511] calling software_resume+0x0/0x292 @ 1 [ 0.964513] PM: Hibernation image not present or could not be loaded. [ 0.964517] initcall software_resume+0x0/0x292 returned -2 after 1 usecs [ 0.964536] Warning: unable to open an initial console. [ 0.964657] async_waiting @ 1 [ 0.980115] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.213558] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.213704] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.214347] ata2.00: ATA-9: WDC WD5000LPCX-24C6HT0, 01.01A01, max UDMA/133 [ 1.214478] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.215436] ata2.00: configured for UDMA/133 [ 1.215623] async_waiting @ 24 [ 1.216529] ata1.00: ATA-8: LITEONIT LSS-16L6G, DS46201, max UDMA/133 [ 1.216655] ata1.00: 31277232 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.217234] ata1.00: configured for UDMA/133 [ 1.217365] async_waiting @ 6 [ 1.217369] async_continuing @ 6 after 0 usec [ 1.217505] scsi 0:0:0:0: Direct-Access ATA LITEONIT LSS-16L 201 PQ: 0 ANSI: 5 [ 1.217916] calling 4_sd_probe_async+0x0/0x1a0 @ 1178 [ 1.217975] sd 0:0:0:0: [sda] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 1.217985] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.218043] initcall 1_async_port_probe+0x0/0x48 returned 0 after 302232 usecs [ 1.218053] async_continuing @ 24 after 2368 usec [ 1.218138] scsi 1:0:0:0: Direct-Access ATA WDC WD5000LPCX-2 1A01 PQ: 0 ANSI: 5 [ 1.218317] calling 5_sd_probe_async+0x0/0x1a0 @ 6 [ 1.218361] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.218363] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 1.218409] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.218425] sd 1:0:0:0: [sdb] Write Protect is off [ 1.218428] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.218451] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.218468] initcall 2_async_port_probe+0x0/0x48 returned 0 after 302636 usecs [ 1.218476] async_continuing @ 1015 after 302604 usec [ 1.218483] initcall 3_async_port_probe+0x0/0x48 returned 0 after 302624 usecs [ 1.219345] sd 0:0:0:0: [sda] Write Protect is off [ 1.219462] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.219473] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.219929] sda: sda1 sda2 [ 1.220269] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.220390] initcall 4_sd_probe_async+0x0/0x1a0 returned 0 after 2408 usecs [ 1.227546] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.342125] usb 1-1: New USB device found, idVendor=8087, idProduct=8000 [ 1.342251] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.342716] hub 1-1:1.0: USB hub found [ 1.342912] hub 1-1:1.0: 8 ports detected [ 1.497780] usb 2-3: new high-speed USB device number 2 using xhci_hcd [ 1.684063] usb 2-3: New USB device found, idVendor=0b95, idProduct=7720 [ 1.684195] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.686273] usb 2-3: Product: AX88772 [ 1.686393] usb 2-3: SerialNumber: 00D13B [ 1.872831] tsc: Refined TSC clocksource calibration: 1696.073 MHz [ 1.990675] asix 2-3:1.0 eth0: register 'asix' at usb-0000:00:14.0-3, ASIX AX88772 USB 2.0 Ethernet, 00:10:60:31:61:c8 [ 2.143969] usb 2-5: new high-speed USB device number 3 using xhci_hcd [ 2.229470] input: PS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input2 [ 2.339318] usb 2-5: New USB device found, idVendor=13d3, idProduct=5173 [ 2.339444] usb 2-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.339568] usb 2-5: Product: Lenovo EasyCamera [ 2.339684] usb 2-5: Manufacturer: Azurewave [ 2.339799] usb 2-5: SerialNumber: NULL [ 2.495116] usb 2-6: new full-speed USB device number 4 using xhci_hcd [ 2.660465] usb 2-6: New USB device found, idVendor=8087, idProduct=07dc [ 2.660592] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.873376] Switched to clocksource tsc [ 2.930271] sdb: sdb1 [ 2.930948] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.931073] initcall 5_sd_probe_async+0x0/0x1a0 returned 0 after 1671906 usecs [ 2.931117] async_continuing @ 1 after 1919564 usec [ 2.935540] Freeing unused kernel memory: 23280K (ffffffff81c41000 - ffffffff832fd000) [ 2.976069] dracut: dracut-018-35.git20120510.fc17 [ 3.009042] udevd[1274]: starting version 182 [ 3.025705] calling drm_core_init+0x0/0x107 [drm] @ 1282 [ 3.025727] [drm] Initialized drm 1.1.0 20060810 [ 3.025865] initcall drm_core_init+0x0/0x107 [drm] returned 0 after 135 usecs [ 3.026827] calling acpi_video_init+0x0/0x8b [video] @ 1282 [ 3.026852] initcall acpi_video_init+0x0/0x8b [video] returned 0 after 16 usecs [ 3.027134] calling acpi_button_driver_init+0x0/0xc [button] @ 1282 [ 3.027321] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3 [ 3.046435] ACPI: Lid Switch [LID0] [ 3.046637] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4 [ 3.046884] ACPI: Power Button [PWRB] [ 3.047050] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 3.047340] ACPI: Power Button [PWRF] [ 3.047487] initcall acpi_button_driver_init+0x0/0xc [button] returned 0 after 19859 usecs [ 3.050125] calling i915_init+0x0/0x8b [i915] @ 1282 [ 3.050656] [drm:i915_dump_device_info] i915 device info: gen=7, pciid=0x0a16 rev=0x09 flags=is_mobile,need_gfx_hws,is_haswell,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg, [ 3.050673] [drm:intel_detect_pch] Found LynxPoint LP PCH [ 3.050725] [drm] Memory usable by graphics device = 2048M [ 3.050846] [drm:i915_gem_gtt_init] GMADR size = 256M [ 3.050847] [drm:i915_gem_gtt_init] GTT stolen size = 64M [ 3.050849] [drm:i915_gem_gtt_init] ppgtt mode: 1 [ 3.050851] [drm] Replacing VGA console driver [ 3.052246] Console: switching to colour dummy device 80x25 [ 3.052998] [drm:intel_opregion_setup] graphic opregion physical addr: 0x90fb1018 [ 3.053009] [drm:intel_opregion_setup] Public ACPI methods supported [ 3.053011] [drm:intel_opregion_setup] SWSCI supported [ 3.058359] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 [ 3.058366] [drm:intel_opregion_setup] ASLE supported [ 3.058487] i915 0000:00:02.0: irq 61 for MSI/MSI-X [ 3.058498] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.058503] [drm] Driver supports precise vblank timestamp query. [ 3.058508] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz [ 3.058511] [drm:validate_vbt] Using VBT from OpRegion: $VBT HASWELL d [ 3.058514] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 3.058516] [drm:parse_general_definitions] crt_ddc_bus_pin: 0 [ 3.058519] [drm:parse_lfp_panel_data] DRRS supported mode is static [ 3.058522] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [ 3.058526] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 0 75600 1366 1404 1426 1592 768 771 777 790 0x8 0xa [ 3.058528] [drm:parse_lfp_panel_data] VBT initial LVDS value 300300 [ 3.058531] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 220 Hz, active high, min brightness 0, level 255 [ 3.058533] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables: [ 3.058536] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 3.058538] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT [ 3.058541] [drm:parse_driver_features] DRRS State Enabled:1 [ 3.058544] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 [ 3.058546] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0 [ 3.058548] [drm:parse_ddi_port] Port C VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0 [ 3.058550] [drm:parse_ddi_port] VBT HDMI level shift for port C: 6 [ 3.058561] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 3.058567] [drm:i915_gem_init_stolen] found 67108864 bytes of stolen memory at 9ba00000 [ 3.058570] [drm:intel_display_power_get] enabling always-on [ 3.058572] [drm:intel_display_power_get] enabling display [ 3.058576] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 3.058626] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec) [ 3.058628] [drm:intel_print_wm_latency] Primary WM1 latency 4 (2.0 usec) [ 3.058630] [drm:intel_print_wm_latency] Primary WM2 latency 36 (18.0 usec) [ 3.058632] [drm:intel_print_wm_latency] Primary WM3 latency 90 (45.0 usec) [ 3.058634] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec) [ 3.058635] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec) [ 3.058637] [drm:intel_print_wm_latency] Sprite WM1 latency 4 (2.0 usec) [ 3.058639] [drm:intel_print_wm_latency] Sprite WM2 latency 36 (18.0 usec) [ 3.058641] [drm:intel_print_wm_latency] Sprite WM3 latency 90 (45.0 usec) [ 3.058643] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec) [ 3.058644] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec) [ 3.058646] [drm:intel_print_wm_latency] Cursor WM1 latency 4 (2.0 usec) [ 3.058648] [drm:intel_print_wm_latency] Cursor WM2 latency 36 (18.0 usec) [ 3.058650] [drm:intel_print_wm_latency] Cursor WM3 latency 90 (45.0 usec) [ 3.058652] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec) [ 3.058654] [drm:intel_modeset_init] 3 display pipes available. [ 3.058670] [drm:intel_ddi_pll_init] CDCLK running at 450000KHz [ 3.058978] [drm:intel_dp_init_connector] Adding eDP connector on port A [ 3.059039] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 [ 3.059042] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 3.059044] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600 [ 3.059046] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200 [ 3.059048] [drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1 [ 3.059159] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 3.059163] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 3.659636] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0002 [ 3.659641] [drm:wait_panel_status] Wait complete [ 3.659647] [drm:_edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd000a [ 3.659650] [drm:_edp_panel_vdd_on] eDP was not running [ 3.861005] [drm:intel_dp_get_dpcd] DPCD: 11 0a 81 41 00 00 01 80 02 00 00 00 0f 07 00 [ 3.861176] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 [ 3.893043] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 3.893047] [drm] VBT doesn't support DRRS [ 3.893108] [drm:intel_panel_setup_backlight] backlight initialized, disabled, brightness 851/851, sysfs interface registered [ 3.898670] [drm:intel_modeset_readout_hw_state] [CRTC:7] hw state readout: enabled [ 3.898673] [drm:intel_modeset_readout_hw_state] [CRTC:11] hw state readout: disabled [ 3.898676] [drm:intel_modeset_readout_hw_state] [CRTC:15] hw state readout: disabled [ 3.898678] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: refcount 1, on 1 [ 3.898681] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: refcount 0, on 0 [ 3.898685] [drm:intel_modeset_readout_hw_state] [ENCODER:17:TMDS-17] hw state readout: disabled, pipe A [ 3.898688] [drm:intel_modeset_readout_hw_state] [ENCODER:25:TMDS-25] hw state readout: enabled, pipe A [ 3.898691] [drm:intel_modeset_readout_hw_state] [CONNECTOR:18:eDP-1] hw state readout: disabled [ 3.898694] [drm:intel_modeset_readout_hw_state] [CONNECTOR:26:HDMI-A-1] hw state readout: enabled [ 3.898698] [drm:intel_dump_pipe_config] [CRTC:7][setup_hw_state] config for pipe A [ 3.898700] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 3.898701] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 3.898704] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.898706] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.898708] [drm:intel_dump_pipe_config] requested mode: [ 3.898712] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 720 0 0 0 400 0 0 0 0x0 0x0 [ 3.898713] [drm:intel_dump_pipe_config] adjusted mode: [ 3.898716] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x5 [ 3.898719] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x0 flags: 0x5 [ 3.898721] [drm:intel_dump_pipe_config] port clock: 148500 [ 3.898722] [drm:intel_dump_pipe_config] pipe src size: 720x400 [ 3.898725] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3.898727] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x07800438, enabled [ 3.898729] [drm:intel_dump_pipe_config] ips: 0 [ 3.898730] [drm:intel_dump_pipe_config] double wide: 0 [ 3.898734] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B [ 3.898736] [drm:i915_get_vblank_timestamp] crtc 1 is disabled [ 3.898738] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B [ 3.898740] [drm:intel_dump_pipe_config] [CRTC:11][setup_hw_state] config for pipe B [ 3.898741] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 3.898743] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 3.898746] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.898748] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.898750] [drm:intel_dump_pipe_config] requested mode: [ 3.898753] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3.898754] [drm:intel_dump_pipe_config] adjusted mode: [ 3.898757] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3.898759] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 3.898761] [drm:intel_dump_pipe_config] port clock: 0 [ 3.898762] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 3.898765] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3.898767] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 3.898768] [drm:intel_dump_pipe_config] ips: 0 [ 3.898770] [drm:intel_dump_pipe_config] double wide: 0 [ 3.898772] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C [ 3.898774] [drm:i915_get_vblank_timestamp] crtc 2 is disabled [ 3.898776] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C [ 3.898778] [drm:intel_dump_pipe_config] [CRTC:15][setup_hw_state] config for pipe C [ 3.898779] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 3.898781] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 3.898783] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.898785] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.898787] [drm:intel_dump_pipe_config] requested mode: [ 3.898789] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3.898791] [drm:intel_dump_pipe_config] adjusted mode: [ 3.898793] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3.898796] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 3.898797] [drm:intel_dump_pipe_config] port clock: 0 [ 3.898799] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 3.898801] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3.898803] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 3.898804] [drm:intel_dump_pipe_config] ips: 0 [ 3.898806] [drm:intel_dump_pipe_config] double wide: 0 [ 3.898812] [drm:intel_connector_check_state] [CONNECTOR:26:HDMI-A-1] [ 3.898815] [drm:check_encoder_state] [ENCODER:17:TMDS-17] [ 3.898817] [drm:check_encoder_state] [ENCODER:25:TMDS-25] [ 3.898819] [drm:check_crtc_state] [CRTC:7] [ 3.898827] [drm:check_crtc_state] [CRTC:11] [ 3.898829] [drm:check_crtc_state] [CRTC:15] [ 3.898831] [drm:check_shared_dpll_state] WRPLL 1 [ 3.898833] [drm:check_shared_dpll_state] WRPLL 2 [ 3.898839] [drm:ironlake_get_plane_config] pipe/plane 0/0 with fb: size=720x400@32, offset=0, pitch 3200, size 0x139000 [ 3.898841] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=139000 [ 3.898848] [drm:i915_pages_create_for_stolen] offset=0x0, size=1282048 [ 3.898852] [drm:intel_alloc_plane_obj] plane fb obj ffff88008c794000 [ 3.898855] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 139000 [ 3.898857] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [139000, 7ffff000] [ 3.901435] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7fdf0 [ 3.901440] [drm:i915_gem_context_init] HW context support initialized [ 3.901449] [drm:init_status_page] render ring hws offset: 0x7fff0000 [ 3.902701] [drm:init_pipe_control] render ring pipe control offset: 0x0016a000 [ 3.902712] [drm:init_status_page] bsd ring hws offset: 0x0016b000 [ 3.902781] [drm:init_status_page] blitter ring hws offset: 0x0018c000 [ 3.902841] [drm:init_status_page] video enhancement ring hws offset: 0x001ad000 [ 3.903010] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:18:eDP-1] [ 3.903013] [drm:intel_dp_detect] [CONNECTOR:18:eDP-1] [ 3.903201] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 3.903364] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 3.903375] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 3.903380] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:18:eDP-1] probed modes : [ 3.903386] [drm:drm_mode_debug_printmodeline] Modeline 19:"1366x768" 60 75600 1366 1404 1426 1592 768 771 777 790 0x48 0xa [ 3.903389] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-1] [ 3.903392] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-1] [ 3.928322] [drm:drm_detect_monitor_audio] Monitor has basic audio support [ 3.953362] [drm:drm_edid_to_eld] ELD monitor ASUS PB238 [ 3.953367] [drm:parse_hdmi_vsdb] HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0 [ 3.953369] [drm:drm_edid_to_eld] ELD size 9, SAD count 1 [ 3.953420] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-1] probed modes : [ 3.953425] [drm:drm_mode_debug_printmodeline] Modeline 30:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 3.953430] [drm:drm_mode_debug_printmodeline] Modeline 68:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 3.953435] [drm:drm_mode_debug_printmodeline] Modeline 61:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 3.953439] [drm:drm_mode_debug_printmodeline] Modeline 76:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 3.953444] [drm:drm_mode_debug_printmodeline] Modeline 66:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 3.953449] [drm:drm_mode_debug_printmodeline] Modeline 60:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 3.953453] [drm:drm_mode_debug_printmodeline] Modeline 35:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 [ 3.953458] [drm:drm_mode_debug_printmodeline] Modeline 46:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 3.953463] [drm:drm_mode_debug_printmodeline] Modeline 37:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 3.953467] [drm:drm_mode_debug_printmodeline] Modeline 36:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 [ 3.953472] [drm:drm_mode_debug_printmodeline] Modeline 38:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 3.953477] [drm:drm_mode_debug_printmodeline] Modeline 39:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 3.953481] [drm:drm_mode_debug_printmodeline] Modeline 32:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 3.953486] [drm:drm_mode_debug_printmodeline] Modeline 70:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 3.953490] [drm:drm_mode_debug_printmodeline] Modeline 33:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 3.953495] [drm:drm_mode_debug_printmodeline] Modeline 64:"1440x576" 50 54000 1440 1464 1592 1728 576 581 586 625 0x40 0xa [ 3.953499] [drm:drm_mode_debug_printmodeline] Modeline 47:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 3.953504] [drm:drm_mode_debug_printmodeline] Modeline 48:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 3.953508] [drm:drm_mode_debug_printmodeline] Modeline 49:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 3.953513] [drm:drm_mode_debug_printmodeline] Modeline 77:"1440x480" 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa [ 3.953517] [drm:drm_mode_debug_printmodeline] Modeline 62:"1440x480" 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa [ 3.953522] [drm:drm_mode_debug_printmodeline] Modeline 50:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 3.953526] [drm:drm_mode_debug_printmodeline] Modeline 51:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 3.953531] [drm:drm_mode_debug_printmodeline] Modeline 52:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 3.953535] [drm:drm_mode_debug_printmodeline] Modeline 40:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 3.953540] [drm:drm_mode_debug_printmodeline] Modeline 41:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 3.953544] [drm:drm_mode_debug_printmodeline] Modeline 34:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 3.953548] [drm:drm_mode_debug_printmodeline] Modeline 69:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 3.953553] [drm:drm_mode_debug_printmodeline] Modeline 31:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 3.953557] [drm:drm_mode_debug_printmodeline] Modeline 42:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 3.953562] [drm:drm_mode_debug_printmodeline] Modeline 43:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 3.953566] [drm:drm_mode_debug_printmodeline] Modeline 44:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 3.953570] [drm:drm_mode_debug_printmodeline] Modeline 53:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 3.953575] [drm:drm_mode_debug_printmodeline] Modeline 45:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 3.953577] [drm:drm_setup_crtcs] [ 3.953580] [drm:drm_enable_connectors] connector 18 enabled? yes [ 3.953583] [drm:drm_enable_connectors] connector 26 enabled? yes [ 3.953586] [drm:intel_fb_initial_config] connector eDP-1 has no encoder or crtc, skipping [ 3.953589] [drm:intel_fb_initial_config] looking for cmdline mode on connector HDMI-A-1 [ 3.953591] [drm:intel_fb_initial_config] looking for preferred mode on connector HDMI-A-1 [ 3.953595] [drm:intel_fb_initial_config] connector HDMI-A-1 on pipe A [CRTC:7]: 1920x1080 [ 3.953597] [drm:intel_fb_initial_config] fallback: Not all outputs enabled [ 3.953600] [drm:intel_fb_initial_config] Enabled: 1, detected: 2 [ 3.953602] [drm:intel_fb_initial_config] Not using firmware configuration [ 3.953605] [drm:drm_target_preferred] looking for cmdline mode on connector 18 [ 3.953607] [drm:drm_target_preferred] looking for preferred mode on connector 18 [ 3.953609] [drm:drm_target_preferred] found mode 1366x768 [ 3.953612] [drm:drm_target_preferred] looking for cmdline mode on connector 26 [ 3.953614] [drm:drm_target_preferred] looking for preferred mode on connector 26 [ 3.953616] [drm:drm_target_preferred] found mode 1920x1080 [ 3.953619] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config [ 3.953624] [drm:drm_setup_crtcs] desired mode 1366x768 set on crtc 7 [ 3.953627] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 11 [ 3.953630] [drm:intelfb_create] no BIOS fb, allocating a new one [ 3.953633] [drm:i915_gem_object_create_stolen] creating stolen object: size=7e9000 [ 3.953637] [drm:i915_pages_create_for_stolen] offset=0x139000, size=8294400 [ 3.954656] [drm:intelfb_create] allocated 1920x1080 fb: 0x001cf000, bo ffff88008c795500 [ 3.954746] fbcon: inteldrmfb (fb0) is primary device [ 3.954797] [drm:intel_crtc_set_config] [CRTC:7] [FB:56] #connectors=1 (x y) (0 0) [ 3.954799] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set [ 3.954803] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3.954807] [drm:drm_mode_debug_printmodeline] Modeline 54:"1366x768" 60 75600 1366 1404 1426 1592 768 771 777 790 0x48 0xa [ 3.954809] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=1, fb_changed=1 [ 3.954810] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch [ 3.954812] [drm:intel_modeset_stage_output_state] [CONNECTOR:26:HDMI-A-1] to [NOCRTC] [ 3.954813] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch [ 3.954815] [drm:intel_modeset_stage_output_state] [CONNECTOR:18:eDP-1] to [CRTC:7] [ 3.954816] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch [ 3.954818] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch [ 3.954821] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 3.954826] [drm:connected_sink_compute_bpp] [CONNECTOR:18:eDP-1] checking for sink bpp constrains [ 3.954828] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18 [ 3.954832] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 0a pixel clock 75600KHz [ 3.954834] [drm:intel_dp_compute_config] using min 1 lanes per VBT [ 3.954835] [drm:intel_dp_compute_config] using min 06 link bw per VBT [ 3.954837] [drm:intel_dp_compute_config] DP link bw 0a lane count 1 clock 270000 bpp 18 [ 3.954839] [drm:intel_dp_compute_config] DP link bw required 136080 available 216000 [ 3.954842] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1 [ 3.954843] [drm:intel_dump_pipe_config] [CRTC:7][modeset] config for pipe A [ 3.954844] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 3.954845] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 3.954847] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.954849] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 2642411, gmch_n: 4194304, link_m: 146800, link_n: 524288, tu: 64 [ 3.954850] [drm:intel_dump_pipe_config] requested mode: [ 3.954852] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 75600 1366 1404 1426 1592 768 771 777 790 0x48 0xa [ 3.954853] [drm:intel_dump_pipe_config] adjusted mode: [ 3.954855] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 75600 1366 1404 1426 1592 768 771 777 790 0x48 0xa [ 3.954857] [drm:intel_dump_crtc_timings] crtc timings: 75600 1366 1404 1426 1592 768 771 777 790, type: 0x48 flags: 0xa [ 3.954858] [drm:intel_dump_pipe_config] port clock: 270000 [ 3.954859] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 3.954861] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3.954862] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 3.954863] [drm:intel_dump_pipe_config] ips: 1 [ 3.954864] [drm:intel_dump_pipe_config] double wide: 0 [ 3.958747] [drm:intel_update_fbc] no output, disabling [ 3.958751] [drm:intel_disable_shared_dpll] disable WRPLL 1 (active 1, on? 1) for crtc 7 [ 3.958753] [drm:intel_disable_shared_dpll] disabling WRPLL 1 [ 3.958760] [drm:intel_display_power_put] disabling display [ 3.958762] [drm:hsw_set_power_well] Requesting to disable the power well [ 3.958781] [drm:ironlake_update_primary_plane] Writing base 001CF000 00000000 0 0 7680 [ 3.958785] [drm:intel_edp_panel_on] Turn eDP power on [ 3.958787] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 3.958791] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd000a [ 3.958792] [drm:wait_panel_status] Wait complete [ 3.958795] [drm:wait_panel_on] Wait for panel power on [ 3.958798] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b [ 4.167821] [drm:wait_panel_status] Wait complete [ 4.168915] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 4.169354] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 4.169784] [drm:intel_dp_start_link_train] clock recovery OK [ 4.170523] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful [ 4.170785] [drm:intel_edp_backlight_on] [ 4.170787] [drm:intel_panel_enable_backlight] pipe A [ 4.170791] [drm:intel_panel_actually_set_backlight] set backlight PWM = 851 [ 4.170798] [drm:intel_edp_psr_enable] PSR not supported by this panel [ 4.204761] [drm:intel_update_fbc] disabled per chip default [ 4.204768] [drm:intel_connector_check_state] [CONNECTOR:18:eDP-1] [ 4.204771] [drm:check_encoder_state] [ENCODER:17:TMDS-17] [ 4.204773] [drm:check_encoder_state] [ENCODER:25:TMDS-25] [ 4.204775] [drm:check_crtc_state] [CRTC:7] [ 4.204784] [drm:check_crtc_state] [CRTC:11] [ 4.204785] [drm:check_crtc_state] [CRTC:15] [ 4.204786] [drm:check_shared_dpll_state] WRPLL 1 [ 4.204788] [drm:check_shared_dpll_state] WRPLL 2 [ 4.204793] [drm:intel_crtc_set_config] [CRTC:11] [FB:56] #connectors=1 (x y) (0 0) [ 4.204796] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set [ 4.204797] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set [ 4.204801] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 4.204805] [drm:drm_mode_debug_printmodeline] Modeline 55:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 4.204807] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=1, fb_changed=0 [ 4.204809] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch [ 4.204811] [drm:intel_modeset_stage_output_state] [CONNECTOR:18:eDP-1] to [CRTC:7] [ 4.204813] [drm:intel_modeset_stage_output_state] [CONNECTOR:26:HDMI-A-1] to [CRTC:11] [ 4.204815] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch [ 4.204816] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch [ 4.204819] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 4.204821] [drm:connected_sink_compute_bpp] [CONNECTOR:26:HDMI-A-1] checking for sink bpp constrains [ 4.204826] [drm:intel_hdmi_compute_config] picking bpc to 8 for HDMI output [ 4.204827] [drm:intel_hdmi_compute_config] forcing pipe bpc to 24 for HDMI [ 4.204829] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 4.204831] [drm:intel_dump_pipe_config] [CRTC:11][modeset] config for pipe B [ 4.204832] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 4.204833] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 4.204836] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 4.204838] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 4.204839] [drm:intel_dump_pipe_config] requested mode: [ 4.204843] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 4.204844] [drm:intel_dump_pipe_config] adjusted mode: [ 4.204847] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 4.204850] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x48 flags: 0x5 [ 4.204851] [drm:intel_dump_pipe_config] port clock: 148500 [ 4.204853] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 4.204855] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 4.204857] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 4.204858] [drm:intel_dump_pipe_config] ips: 0 [ 4.204860] [drm:intel_dump_pipe_config] double wide: 0 [ 4.204865] [drm:intel_display_power_get] enabling display [ 4.204867] [drm:hsw_set_power_well] Enabling power well [ 4.209605] [drm:intel_get_shared_dpll] CRTC:11 allocated WRPLL 1 [ 4.209607] [drm:intel_get_shared_dpll] using WRPLL 1 for pipe B [ 4.209610] [drm:intel_enable_shared_dpll] enable WRPLL 1 (active 0, on? 0)for crtc 11 [ 4.209611] [drm:intel_enable_shared_dpll] enabling WRPLL 1 [ 4.209646] [drm:ironlake_update_primary_plane] Writing base 001CF000 00000000 0 0 7680 [ 4.209649] [drm:intel_ddi_pre_enable] Audio on pipe B on DDI [ 4.209650] [drm:intel_ddi_pre_enable] DDI audio: write eld information [ 4.209653] [drm:intel_write_eld] ELD on [CONNECTOR:26:HDMI-A-1], [ENCODER:25:TMDS-25] [ 4.209654] [drm:haswell_write_eld] HDMI audio: enable codec [ 4.209657] [drm:haswell_write_eld] HDMI audio: pin eld vld status=0x00000040 [ 4.209659] [drm:haswell_write_eld] HDMI audio: eld vld status=0x00000050 [ 4.209660] [drm:haswell_write_eld] HDMI audio: audio conf: 0x0070fa60 [ 4.209662] [drm:haswell_write_eld] ELD on pipe B [ 4.209664] [drm:audio_config_hdmi_pixel_clock] Configuring HDMI audio for pixel clock 148500 (0x00090000) [ 4.209668] [drm:haswell_write_eld] port num:0 [ 4.209669] [drm:haswell_write_eld] ELD size 9 [ 4.237778] [drm:intel_update_fbc] more than one pipe active, disabling compression [ 4.237781] [drm:intel_connector_check_state] [CONNECTOR:18:eDP-1] [ 4.237784] [drm:intel_connector_check_state] [CONNECTOR:26:HDMI-A-1] [ 4.237786] [drm:check_encoder_state] [ENCODER:17:TMDS-17] [ 4.237788] [drm:check_encoder_state] [ENCODER:25:TMDS-25] [ 4.237790] [drm:check_crtc_state] [CRTC:7] [ 4.237798] [drm:check_crtc_state] [CRTC:11] [ 4.237805] [drm:check_crtc_state] [CRTC:15] [ 4.237806] [drm:check_shared_dpll_state] WRPLL 1 [ 4.237808] [drm:check_shared_dpll_state] WRPLL 2 [ 4.237810] [drm:intel_crtc_set_config] [CRTC:15] [NOFB] [ 4.237813] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:15], mode_changed=0, fb_changed=0 [ 4.237814] [drm:intel_modeset_stage_output_state] [CONNECTOR:18:eDP-1] to [CRTC:7] [ 4.237816] [drm:intel_modeset_stage_output_state] [CONNECTOR:26:HDMI-A-1] to [CRTC:11] [ 4.237825] Console: switching to colour frame buffer device 170x48 [ 4.237837] [drm:intel_crtc_set_config] [CRTC:7] [FB:56] #connectors=1 (x y) (0 0) [ 4.237839] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0 [ 4.237841] [drm:intel_modeset_stage_output_state] [CONNECTOR:18:eDP-1] to [CRTC:7] [ 4.237843] [drm:intel_modeset_stage_output_state] [CONNECTOR:26:HDMI-A-1] to [CRTC:11] [ 4.237845] [drm:intel_crtc_set_config] [CRTC:11] [FB:56] #connectors=1 (x y) (0 0) [ 4.237847] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 4.237848] [drm:intel_modeset_stage_output_state] [CONNECTOR:18:eDP-1] to [CRTC:7] [ 4.237850] [drm:intel_modeset_stage_output_state] [CONNECTOR:26:HDMI-A-1] to [CRTC:11] [ 4.246292] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 4.246354] i915 0000:00:02.0: registered panic notifier [ 4.253550] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 4.253754] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 4.253937] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0 [ 4.254082] initcall i915_init+0x0/0x8b [i915] returned 0 after 1175207 usecs [ 4.258069] dracut: Starting plymouth daemon [ 4.266592] [drm:intel_crtc_set_config] [CRTC:7] [FB:56] #connectors=1 (x y) (0 0) [ 4.266595] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0 [ 4.266597] [drm:intel_modeset_stage_output_state] [CONNECTOR:18:eDP-1] to [CRTC:7] [ 4.266598] [drm:intel_modeset_stage_output_state] [CONNECTOR:26:HDMI-A-1] to [CRTC:11] [ 4.266601] [drm:intel_crtc_set_config] [CRTC:11] [FB:56] #connectors=1 (x y) (0 0) [ 4.266603] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 4.266604] [drm:intel_modeset_stage_output_state] [CONNECTOR:18:eDP-1] to [CRTC:7] [ 4.266605] [drm:intel_modeset_stage_output_state] [CONNECTOR:26:HDMI-A-1] to [CRTC:11] [ 4.278543] [drm:intel_crtc_set_config] [CRTC:7] [FB:56] #connectors=1 (x y) (0 0) [ 4.278546] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0 [ 4.278548] [drm:intel_modeset_stage_output_state] [CONNECTOR:18:eDP-1] to [CRTC:7] [ 4.278550] [drm:intel_modeset_stage_output_state] [CONNECTOR:26:HDMI-A-1] to [CRTC:11] [ 4.278552] [drm:intel_crtc_set_config] [CRTC:11] [FB:56] #connectors=1 (x y) (0 0) [ 4.278554] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 4.278556] [drm:intel_modeset_stage_output_state] [CONNECTOR:18:eDP-1] to [CRTC:7] [ 4.278557] [drm:intel_modeset_stage_output_state] [CONNECTOR:26:HDMI-A-1] to [CRTC:11] [ 4.340625] calling acpi_cpufreq_init+0x0/0x1c6 [acpi_cpufreq] @ 1563 [ 4.341742] initcall acpi_cpufreq_init+0x0/0x1c6 [acpi_cpufreq] returned 0 after 1078 usecs [ 4.342556] calling acpi_ac_init+0x0/0x4d [ac] @ 1560 [ 4.345854] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 4.346539] ACPI: AC Adapter [ACAD] (on-line) [ 4.346621] initcall acpi_ac_init+0x0/0x4d [ac] returned 0 after 3958 usecs [ 4.358616] calling acpi_battery_init+0x0/0x13 [battery] @ 1576 [ 4.358627] initcall acpi_battery_init+0x0/0x13 [battery] returned 0 after 2 usecs [ 4.362839] calling acpi_wmi_init+0x0/0x6a [wmi] @ 1568 [ 4.367393] calling init_soundcore+0x0/0x9b [soundcore] @ 1564 [ 4.367417] initcall init_soundcore+0x0/0x9b [soundcore] returned 0 after 14 usecs [ 4.368097] calling alsa_sound_init+0x0/0x84 [snd] @ 1564 [ 4.368127] initcall alsa_sound_init+0x0/0x84 [snd] returned 0 after 18 usecs [ 4.368475] calling alsa_timer_init+0x0/0x163 [snd_timer] @ 1564 [ 4.368775] initcall alsa_timer_init+0x0/0x163 [snd_timer] returned 0 after 283 usecs [ 4.369625] calling alsa_pcm_init+0x0/0x67 [snd_pcm] @ 1564 [ 4.369641] initcall alsa_pcm_init+0x0/0x67 [snd_pcm] returned 0 after 3 usecs [ 4.369914] calling lpc_ich_driver_init+0x0/0x1a [lpc_ich] @ 1565 [ 4.370041] initcall lpc_ich_driver_init+0x0/0x1a [lpc_ich] returned 0 after 116 usecs [ 4.370064] calling alsa_hwdep_init+0x0/0x5f [snd_hwdep] @ 1564 [ 4.370073] initcall alsa_hwdep_init+0x0/0x5f [snd_hwdep] returned 0 after 2 usecs [ 4.371975] calling i2c_i801_init+0x0/0xa4 [i2c_i801] @ 1938 [ 4.372149] ACPI Warning: SystemIO range 0x0000000000004040-0x000000000000405f conflicts with OpRegion 0x0000000000004040-0x000000000000404f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258) [ 4.372311] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.372402] initcall i2c_i801_init+0x0/0xa4 [i2c_i801] returned 0 after 409 usecs [ 4.372715] calling azx_driver_init+0x0/0x1a [snd_hda_intel] @ 1560 [ 4.372989] initcall azx_driver_init+0x0/0x1a [snd_hda_intel] returned 0 after 260 usecs [ 4.373170] snd_hda_intel 0000:00:03.0: irq 62 for MSI/MSI-X [ 4.373271] snd_hda_intel 0000:00:1b.0: irq 63 for MSI/MSI-X [ 4.374529] calling videodev_init+0x0/0x7f [videodev] @ 1560 [ 4.374533] Linux video capture interface: v2.00 [ 4.374608] initcall videodev_init+0x0/0x7f [videodev] returned 0 after 65 usecs [ 4.376087] calling uvc_init+0x0/0x4b [uvcvideo] @ 1560 [ 4.376143] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (13d3:5173) [ 4.379324] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input7 [ 4.379386] calling pcspkr_platform_driver_init+0x0/0x13 [pcspkr] @ 1565 [ 4.379459] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 4.379495] usbcore: registered new interface driver uvcvideo [ 4.379496] USB Video Class driver (1.1.1) [ 4.379505] initcall uvc_init+0x0/0x4b [uvcvideo] returned 0 after 3324 usecs [ 4.379664] initcall pcspkr_platform_driver_init+0x0/0x13 [pcspkr] returned 0 after 265 usecs [ 4.396046] calling patch_hdmi_init+0x0/0xc [snd_hda_codec_hdmi] @ 2342 [ 4.396056] initcall patch_hdmi_init+0x0/0xc [snd_hda_codec_hdmi] returned 0 after 0 usecs [ 4.398978] ALSA sound/pci/hda/hda_eld.c:260 HDMI: Unknown ELD version 0 [ 4.400814] ALSA sound/pci/hda/hda_eld.c:260 HDMI: Unknown ELD version 0 [ 4.401322] calling patch_realtek_init+0x0/0xc [snd_hda_codec_realtek] @ 2341 [ 4.401329] initcall patch_realtek_init+0x0/0xc [snd_hda_codec_realtek] returned 0 after 0 usecs [ 4.401757] sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 4.401836] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.401907] sound hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 4.402691] ALSA sound/pci/hda/hda_eld.c:260 HDMI: Unknown ELD version 0 [ 4.405421] sound hdaudioC1D0: mono: mono_out=0x0 [ 4.407424] sound hdaudioC1D0: inputs: [ 4.409073] sound hdaudioC1D0: Mic=0x19 [ 4.409075] sound hdaudioC1D0: Internal Mic=0x12 [ 4.409227] [drm:intel_crtc_set_config] [CRTC:7] [FB:56] #connectors=1 (x y) (0 0) [ 4.409231] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0 [ 4.409232] [drm:intel_modeset_stage_output_state] [CONNECTOR:18:eDP-1] to [CRTC:7] [ 4.409234] [drm:intel_modeset_stage_output_state] [CONNECTOR:26:HDMI-A-1] to [CRTC:11] [ 4.409237] [drm:intel_crtc_set_config] [CRTC:11] [FB:56] #connectors=1 (x y) (0 0) [ 4.409239] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 4.409240] [drm:intel_modeset_stage_output_state] [CONNECTOR:18:eDP-1] to [CRTC:7] [ 4.409242] [drm:intel_modeset_stage_output_state] [CONNECTOR:26:HDMI-A-1] to [CRTC:11] [ 4.411221] calling iTCO_vendor_init_module+0x0/0x19 [iTCO_vendor_support] @ 1563 [ 4.411222] iTCO_vendor_support: vendor-support=0 [ 4.411226] initcall iTCO_vendor_init_module+0x0/0x19 [iTCO_vendor_support] returned 0 after 1 usecs [ 4.411432] calling iTCO_wdt_init_module+0x0/0x2b [iTCO_wdt] @ 1563 [ 4.411433] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 4.411470] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860) [ 4.411603] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 4.411628] initcall iTCO_wdt_init_module+0x0/0x2b [iTCO_wdt] returned 0 after 186 usecs [ 4.439395] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 4.440917] ACPI: Battery Slot [BAT1] (battery present) [ 4.442637] wmi: Mapper loaded [ 4.444514] initcall acpi_wmi_init+0x0/0x6a [wmi] returned 0 after 79716 usecs [ 4.504879] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 4.681245] random: nonblocking pool is initialized [ 4.701773] ALSA sound/pci/hda/hda_eld.c:260 HDMI: Unknown ELD version 0 [ 4.789952] dracut: Checking ext4: /dev/sdb1 [ 4.791626] dracut: issuing e2fsck -a /dev/sdb1 [ 5.005922] ALSA sound/pci/hda/hda_eld.c:260 HDMI: Unknown ELD version 0 [ 5.010590] dracut: /dev/sdb1: clean, 2125827/30081024 files, 52948125/120320000 blocks [ 5.012614] dracut: Remounting /dev/sdb1 with -o ro [ 5.047215] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 5.159190] dracut: Mounted root filesystem /dev/sdb1 [ 5.224341] calling dm_init+0x0/0x43 [dm_mod] @ 2408 [ 5.224402] device-mapper: uevent: version 1.0.3 [ 5.226084] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 5.227620] initcall dm_init+0x0/0x43 [dm_mod] returned 0 after 3189 usecs [ 5.310007] ALSA sound/pci/hda/hda_eld.c:260 HDMI: Unknown ELD version 0 [ 5.343884] dracut: Switching root [ 5.614114] ALSA sound/pci/hda/hda_eld.c:260 HDMI: Unknown ELD version 0 [ 5.742560] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 5.918325] ALSA sound/pci/hda/hda_eld.c:260 HDMI: Unknown ELD version 0 [ 6.155262] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) [ 6.222450] ALSA sound/pci/hda/hda_eld.c:260 HDMI: Unknown ELD version 0 [ 6.295128] systemd[1]: Failed to insert module 'ipv6' [ 6.314792] systemd[1]: Set hostname to . [ 6.527581] ALSA sound/pci/hda/hda_eld.c:260 HDMI: Unknown ELD version 0 [ 6.775517] LVM: Logical Volume autoactivation enabled. [ 6.776887] LVM: Activation generator successfully completed. [ 6.831686] ALSA sound/pci/hda/hda_eld.c:260 HDMI: Unknown ELD version 0 [ 6.866970] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 6.866981] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 7.595522] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 7.596949] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.598337] systemd[1]: Starting Syslog Socket. [ 7.601096] systemd[1]: Listening on Syslog Socket. [ 7.602488] systemd[1]: Starting Remote File Systems. [ 7.605197] systemd[1]: Reached target Remote File Systems. [ 7.606599] systemd[1]: Starting Replay Read-Ahead Data... [ 7.609733] systemd[1]: Starting Collect Read-Ahead Data... [ 7.612846] systemd[1]: Starting Delayed Shutdown Socket. [ 7.615686] systemd[1]: Listening on Delayed Shutdown Socket. [ 7.617137] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 7.620024] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 7.620662] systemd-readahead[2435]: Failed to create fanotify object: Function not implemented [ 7.620724] systemd-readahead[2434]: Bumped block_nr parameter of 8:16 to 20480. This is a temporary hack and should be removed one day. [ 7.624312] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 7.627325] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 7.628834] systemd[1]: Starting Journal Socket. [ 7.631803] systemd[1]: Listening on Journal Socket. [ 7.633367] systemd[1]: Starting Create static device nodes in /dev... [ 7.636681] systemd[1]: Mounting Huge Pages File System... [ 7.639902] systemd[1]: Starting Journal Service... [ 7.645027] systemd[1]: Started Journal Service. [ 7.646610] systemd[1]: Mounting Debug File System... [ 7.649789] systemd[1]: Starting Encrypted Volumes. [ 7.652545] systemd[1]: Reached target Encrypted Volumes. [ 7.653964] systemd[1]: Starting udev Kernel Socket. [ 7.656676] systemd[1]: Listening on udev Kernel Socket. [ 7.658065] systemd[1]: Starting udev Control Socket. [ 7.660797] systemd[1]: Listening on udev Control Socket. [ 7.662192] systemd[1]: Starting udev Coldplug all Devices... [ 7.665240] systemd[1]: Mounting POSIX Message Queue File System... [ 7.668236] systemd[1]: Starting LVM2 metadata daemon socket. [ 7.671007] systemd[1]: Listening on LVM2 metadata daemon socket. [ 7.672379] systemd[1]: Starting Device-mapper event daemon FIFOs. [ 7.675115] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 7.676496] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 7.679697] systemd[1]: Expecting device dev-disk-by\x2duuid-6a28c748\x2d80f9\x2d48ad\x2d8ff8\x2dba93ce869566.device... [ 7.682649] systemd[1]: Mounting Temporary Directory... [ 8.025632] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [ 8.027546] systemd[1]: Expecting device dev-disk-by\x2duuid-93D4\x2d471C.device... [ 8.030895] systemd[1]: systemd-readahead-collect.service: main process exited, code=exited, status=1/FAILURE [ 8.034126] systemd[1]: Started Collect Read-Ahead Data. [ 8.517954] systemd-journald[2439]: Vacuuming done, freed 0 bytes [ 8.969942] EXT4-fs (sdb1): re-mounted. Opts: (null) [ 8.980250] systemd-udevd[3311]: starting version 204 [ 9.489425] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 9.672419] Adding 2047996k swap on /dev/sda2. Priority:-1 extents:1 across:2047996k SS [ 9.704478] [drm:intel_crtc_set_config] [CRTC:7] [FB:56] #connectors=1 (x y) (0 0) [ 9.704482] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0 [ 9.704484] [drm:intel_modeset_stage_output_state] [CONNECTOR:18:eDP-1] to [CRTC:7] [ 9.704486] [drm:intel_modeset_stage_output_state] [CONNECTOR:26:HDMI-A-1] to [CRTC:11] [ 9.704490] [drm:intel_crtc_set_config] [CRTC:11] [FB:56] #connectors=1 (x y) (0 0) [ 9.704492] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 9.704494] [drm:intel_modeset_stage_output_state] [CONNECTOR:18:eDP-1] to [CRTC:7] [ 9.704497] [drm:intel_modeset_stage_output_state] [CONNECTOR:26:HDMI-A-1] to [CRTC:11] [ 10.011530] systemd-journald[2439]: Received request to flush runtime journal from PID 1 [ 10.792588] systemd-udevd[3317]: renamed network interface eth0 to enp0s20u3 [ 10.913352] audit: type=1305 audit(1407959359.874:2): audit_pid=3356 old=0 auid=4294967295 ses=4294967295 res=1 [ 11.727949] traps: alsactl[3381] general protection ip:3cda048c39 sp:7fff3beea2e0 error:0 in libc-2.17.so[3cda000000+1b5000] [ 13.368233] systemd-logind[3423]: Watching system buttons on /dev/input/event4 (Power Button) [ 13.369341] systemd-logind[3423]: Watching system buttons on /dev/input/event5 (Video Bus) [ 13.370401] systemd-logind[3423]: Watching system buttons on /dev/input/event3 (Power Button) [ 13.371448] systemd-logind[3423]: Watching system buttons on /dev/input/event2 (Lid Switch) [ 18.341312] [drm:intel_crtc_set_config] [CRTC:7] [FB:56] #connectors=1 (x y) (0 0) [ 18.341316] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0 [ 18.341318] [drm:intel_modeset_stage_output_state] [CONNECTOR:18:eDP-1] to [CRTC:7] [ 18.341319] [drm:intel_modeset_stage_output_state] [CONNECTOR:26:HDMI-A-1] to [CRTC:11] [ 18.341322] [drm:intel_crtc_set_config] [CRTC:11] [FB:56] #connectors=1 (x y) (0 0) [ 18.341324] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 18.341325] [drm:intel_modeset_stage_output_state] [CONNECTOR:18:eDP-1] to [CRTC:7] [ 18.341326] [drm:intel_modeset_stage_output_state] [CONNECTOR:26:HDMI-A-1] to [CRTC:11] [ 20.394551] asix 2-3:1.0 enp0s20u3: link down [ 22.059493] asix 2-3:1.0 enp0s20u3: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 36.773308] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00400000, dig 0x10101210 [ 36.773314] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 0 [ 36.773351] [drm:i915_hotplug_work_func] running encoder hotplug functions [ 36.773357] [drm:i915_hotplug_work_func] Connector HDMI-A-1 (pin 5) received hotplug event. [ 36.773410] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-1] [ 36.786126] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 176 [ 36.786180] Raw EDID: [ 36.786198] 00 ff ff ff ff ff ff 00 04 69 a2 23 6b 9f 00 00 [ 36.786233] 31 17 01 03 80 33 1d 78 2a e2 95 a2 55 4f 9f 26 [ 36.786267] 11 50 54 b7 ef 00 d1 c0 b3 00 95 00 81 80 81 40 [ 36.786301] 81 c0 71 4f 01 01 02 3a 80 18 71 38 2d 40 58 3f [ 36.786334] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 36.786368] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 36.786418] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 36.786469] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 36.786692] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(128) [ 36.786697] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 36.786703] [drm:intel_hpd_irq_event] [CONNECTOR:26:HDMI-A-1] status updated from connected to disconnected [ 36.786741] [drm:drm_fb_helper_hotplug_event] [ 36.786746] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:18:eDP-1] [ 36.786750] [drm:intel_dp_detect] [CONNECTOR:18:eDP-1] [ 36.786755] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 36.786763] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 36.786934] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 36.787101] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 36.787117] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 36.787122] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:18:eDP-1] probed modes : [ 36.787130] [drm:drm_mode_debug_printmodeline] Modeline 19:"1366x768" 60 75600 1366 1404 1426 1592 768 771 777 790 0x48 0xa [ 36.787134] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-1] [ 36.787140] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-1] [ 36.787307] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 36.787313] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 36.787317] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-1] disconnected [ 36.787327] [drm:drm_setup_crtcs] [ 36.787331] [drm:drm_enable_connectors] connector 18 enabled? yes [ 36.787334] [drm:drm_enable_connectors] connector 26 enabled? no [ 36.787337] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 36.787340] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 [ 36.787344] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:7]: 1366x768 [ 36.787347] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 36.787350] [drm:drm_setup_crtcs] desired mode 1366x768 set on crtc 7 [ 36.787359] [drm:intel_crtc_set_config] [CRTC:7] [FB:56] #connectors=1 (x y) (0 0) [ 36.787364] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0 [ 36.787367] [drm:intel_modeset_stage_output_state] [CONNECTOR:18:eDP-1] to [CRTC:7] [ 36.787385] [drm:intel_modeset_stage_output_state] [CONNECTOR:26:HDMI-A-1] to [CRTC:11] [ 36.787397] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 36.787407] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=1, fb_changed=0 [ 36.787415] [drm:intel_modeset_stage_output_state] [CONNECTOR:26:HDMI-A-1] to [NOCRTC] [ 36.787423] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch [ 36.787431] [drm:intel_modeset_stage_output_state] [CONNECTOR:18:eDP-1] to [CRTC:7] [ 36.787439] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch [ 36.787446] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch [ 36.787454] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 2 [ 36.801425] [drm:intel_update_fbc] disabled per chip default [ 36.801432] [drm:intel_disable_shared_dpll] disable WRPLL 1 (active 1, on? 1) for crtc 11 [ 36.801435] [drm:intel_disable_shared_dpll] disabling WRPLL 1 [ 36.801448] [drm:intel_connector_check_state] [CONNECTOR:18:eDP-1] [ 36.801452] [drm:check_encoder_state] [ENCODER:17:TMDS-17] [ 36.801454] [drm:check_encoder_state] [ENCODER:25:TMDS-25] [ 36.801456] [drm:check_crtc_state] [CRTC:7] [ 36.801465] [drm:check_crtc_state] [CRTC:11] [ 36.801467] [drm:check_crtc_state] [CRTC:15] [ 36.801470] [drm:check_shared_dpll_state] WRPLL 1 [ 36.801472] [drm:check_shared_dpll_state] WRPLL 2 [ 36.801477] [drm:intel_crtc_set_config] [CRTC:15] [NOFB] [ 36.801481] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:15], mode_changed=0, fb_changed=0 [ 36.801484] [drm:intel_modeset_stage_output_state] [CONNECTOR:18:eDP-1] to [CRTC:7] [ 39.085150] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00400000, dig 0x10101210 [ 39.085156] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 0 [ 39.085194] [drm:i915_hotplug_work_func] running encoder hotplug functions [ 39.085202] [drm:i915_hotplug_work_func] Connector HDMI-A-1 (pin 5) received hotplug event. [ 39.085208] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-1] [ 39.085359] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 39.085364] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 39.086481] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00400000, dig 0x10101110 [ 39.086487] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 1 [ 39.086507] [drm:i915_hotplug_work_func] running encoder hotplug functions [ 39.086514] [drm:i915_hotplug_work_func] Connector HDMI-A-1 (pin 5) received hotplug event. [ 39.086520] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-1] [ 39.086704] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 39.086709] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 39.089915] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00400000, dig 0x10101210 [ 39.089921] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 2 [ 39.089954] [drm:i915_hotplug_work_func] running encoder hotplug functions [ 39.089962] [drm:i915_hotplug_work_func] Connector HDMI-A-1 (pin 5) received hotplug event. [ 39.089968] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-1] [ 39.090134] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 39.090137] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 39.242760] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00400000, dig 0x10101210 [ 39.242766] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 3 [ 39.242796] [drm:i915_hotplug_work_func] running encoder hotplug functions [ 39.242799] [drm:i915_hotplug_work_func] Connector HDMI-A-1 (pin 5) received hotplug event. [ 39.242803] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-1] [ 39.255637] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 209 [ 39.255694] Raw EDID: [ 39.255712] 00 ff ff ff ff ff ff 00 04 69 a2 23 6b 9f 00 00 [ 39.255746] 31 17 01 03 80 33 1d 78 2a e2 95 a2 55 4f 9f 77 [ 39.255780] 91 50 54 b7 ef 00 d1 c0 b3 00 95 00 81 80 81 40 [ 39.255814] 81 c0 71 4f 01 01 02 3a 80 18 71 38 2d 40 58 2c [ 39.255848] 45 00 fd 1e 11 00 00 1e 00 00 00 ff 00 44 43 4c [ 39.255882] 4d 54 46 30 34 30 38 31 31 0a 00 00 00 fd 00 32 [ 39.255916] 4b 18 53 11 00 0a 20 20 20 20 20 20 00 00 00 fc [ 39.255951] 00 41 53 55 53 20 50 42 32 33 38 0a 20 20 01 11 [ 39.280536] [drm:drm_detect_monitor_audio] Monitor has basic audio support [ 39.280544] [drm:intel_hpd_irq_event] [CONNECTOR:26:HDMI-A-1] status updated from disconnected to connected [ 39.280575] [drm:drm_fb_helper_hotplug_event] [ 39.280579] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:18:eDP-1] [ 39.280583] [drm:intel_dp_detect] [CONNECTOR:18:eDP-1] [ 39.281215] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 39.281380] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 39.281393] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 39.281398] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:18:eDP-1] probed modes : [ 39.281404] [drm:drm_mode_debug_printmodeline] Modeline 19:"1366x768" 60 75600 1366 1404 1426 1592 768 771 777 790 0x48 0xa [ 39.281407] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-1] [ 39.281410] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-1] [ 39.306464] [drm:drm_detect_monitor_audio] Monitor has basic audio support [ 39.331700] [drm:drm_edid_to_eld] ELD monitor ASUS PB238 [ 39.331706] [drm:parse_hdmi_vsdb] HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0 [ 39.331709] [drm:drm_edid_to_eld] ELD size 9, SAD count 1 [ 39.331752] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-1] probed modes : [ 39.331757] [drm:drm_mode_debug_printmodeline] Modeline 31:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 39.331760] [drm:drm_mode_debug_printmodeline] Modeline 70:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 39.331764] [drm:drm_mode_debug_printmodeline] Modeline 63:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 39.331767] [drm:drm_mode_debug_printmodeline] Modeline 78:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 39.331770] [drm:drm_mode_debug_printmodeline] Modeline 68:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 39.331773] [drm:drm_mode_debug_printmodeline] Modeline 62:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 39.331776] [drm:drm_mode_debug_printmodeline] Modeline 36:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 [ 39.331779] [drm:drm_mode_debug_printmodeline] Modeline 47:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 39.331782] [drm:drm_mode_debug_printmodeline] Modeline 38:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 39.331785] [drm:drm_mode_debug_printmodeline] Modeline 37:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 [ 39.331788] [drm:drm_mode_debug_printmodeline] Modeline 39:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 39.331791] [drm:drm_mode_debug_printmodeline] Modeline 40:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 39.331793] [drm:drm_mode_debug_printmodeline] Modeline 33:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 39.331796] [drm:drm_mode_debug_printmodeline] Modeline 72:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 39.331799] [drm:drm_mode_debug_printmodeline] Modeline 34:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 39.331802] [drm:drm_mode_debug_printmodeline] Modeline 66:"1440x576" 50 54000 1440 1464 1592 1728 576 581 586 625 0x40 0xa [ 39.331805] [drm:drm_mode_debug_printmodeline] Modeline 48:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 39.331808] [drm:drm_mode_debug_printmodeline] Modeline 49:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 39.331811] [drm:drm_mode_debug_printmodeline] Modeline 50:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 39.331814] [drm:drm_mode_debug_printmodeline] Modeline 79:"1440x480" 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa [ 39.331817] [drm:drm_mode_debug_printmodeline] Modeline 64:"1440x480" 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa [ 39.331820] [drm:drm_mode_debug_printmodeline] Modeline 51:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 39.331823] [drm:drm_mode_debug_printmodeline] Modeline 52:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 39.331825] [drm:drm_mode_debug_printmodeline] Modeline 53:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 39.331828] [drm:drm_mode_debug_printmodeline] Modeline 41:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 39.331831] [drm:drm_mode_debug_printmodeline] Modeline 42:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 39.331834] [drm:drm_mode_debug_printmodeline] Modeline 35:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 39.331837] [drm:drm_mode_debug_printmodeline] Modeline 71:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 39.331840] [drm:drm_mode_debug_printmodeline] Modeline 32:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 39.331843] [drm:drm_mode_debug_printmodeline] Modeline 43:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 39.331846] [drm:drm_mode_debug_printmodeline] Modeline 44:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 39.331849] [drm:drm_mode_debug_printmodeline] Modeline 45:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 39.331852] [drm:drm_mode_debug_printmodeline] Modeline 54:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 39.331855] [drm:drm_mode_debug_printmodeline] Modeline 46:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 39.331858] [drm:drm_setup_crtcs] [ 39.331861] [drm:drm_enable_connectors] connector 18 enabled? yes [ 39.331863] [drm:drm_enable_connectors] connector 26 enabled? yes [ 39.331866] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 39.331868] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 [ 39.331871] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:7]: 1366x768 [ 39.331873] [drm:intel_fb_initial_config] connector HDMI-A-1 has no encoder or crtc, skipping [ 39.331875] [drm:intel_fb_initial_config] fallback: Not all outputs enabled [ 39.331876] [drm:intel_fb_initial_config] Enabled: 1, detected: 2 [ 39.331878] [drm:intel_fb_initial_config] Not using firmware configuration [ 39.331880] [drm:drm_target_preferred] looking for cmdline mode on connector 18 [ 39.331882] [drm:drm_target_preferred] looking for preferred mode on connector 18 [ 39.331884] [drm:drm_target_preferred] found mode 1366x768 [ 39.331885] [drm:drm_target_preferred] looking for cmdline mode on connector 26 [ 39.331887] [drm:drm_target_preferred] looking for preferred mode on connector 26 [ 39.331889] [drm:drm_target_preferred] found mode 1920x1080 [ 39.331891] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config [ 39.331895] [drm:drm_setup_crtcs] desired mode 1366x768 set on crtc 7 [ 39.331898] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 11 [ 39.331903] [drm:intel_crtc_set_config] [CRTC:7] [FB:56] #connectors=1 (x y) (0 0) [ 39.331907] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0 [ 39.331909] [drm:intel_modeset_stage_output_state] [CONNECTOR:18:eDP-1] to [CRTC:7] [ 39.331912] [drm:intel_crtc_set_config] [CRTC:11] [FB:56] #connectors=1 (x y) (0 0) [ 39.331914] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set [ 39.331917] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=1, fb_changed=0 [ 39.331919] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch [ 39.331921] [drm:intel_modeset_stage_output_state] [CONNECTOR:18:eDP-1] to [CRTC:7] [ 39.331923] [drm:intel_modeset_stage_output_state] [CONNECTOR:26:HDMI-A-1] to [CRTC:11] [ 39.331925] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch [ 39.331926] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch [ 39.331929] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 39.331932] [drm:connected_sink_compute_bpp] [CONNECTOR:26:HDMI-A-1] checking for sink bpp constrains [ 39.331936] [drm:intel_hdmi_compute_config] picking bpc to 8 for HDMI output [ 39.331938] [drm:intel_hdmi_compute_config] forcing pipe bpc to 24 for HDMI [ 39.331940] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 39.331943] [drm:intel_dump_pipe_config] [CRTC:11][modeset] config for pipe B [ 39.331944] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 39.331946] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 39.331949] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 39.331952] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 39.331953] [drm:intel_dump_pipe_config] requested mode: [ 39.331956] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 39.331958] [drm:intel_dump_pipe_config] adjusted mode: [ 39.331961] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 39.331964] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x48 flags: 0x5 [ 39.331966] [drm:intel_dump_pipe_config] port clock: 148500 [ 39.331968] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 39.331971] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 39.331973] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 39.331975] [drm:intel_dump_pipe_config] ips: 0 [ 39.331976] [drm:intel_dump_pipe_config] double wide: 0 [ 39.333888] [drm:intel_get_shared_dpll] CRTC:11 allocated WRPLL 1 [ 39.333890] [drm:intel_get_shared_dpll] using WRPLL 1 for pipe B [ 39.333894] [drm:intel_enable_shared_dpll] enable WRPLL 1 (active 0, on? 0)for crtc 11 [ 39.333895] [drm:intel_enable_shared_dpll] enabling WRPLL 1 [ 39.333930] [drm:ironlake_update_primary_plane] Writing base 001CF000 00000000 0 0 7680 [ 39.333934] [drm:intel_ddi_pre_enable] Audio on pipe B on DDI [ 39.333935] [drm:intel_ddi_pre_enable] DDI audio: write eld information [ 39.333938] [drm:intel_write_eld] ELD on [CONNECTOR:26:HDMI-A-1], [ENCODER:25:TMDS-25] [ 39.333940] [drm:haswell_write_eld] HDMI audio: enable codec [ 39.333943] [drm:haswell_write_eld] HDMI audio: pin eld vld status=0x00000040 [ 39.333945] [drm:haswell_write_eld] HDMI audio: eld vld status=0x00000050 [ 39.333947] [drm:haswell_write_eld] HDMI audio: audio conf: 0x0079fa60 [ 39.333950] [drm:haswell_write_eld] ELD on pipe B [ 39.333953] [drm:audio_config_hdmi_pixel_clock] Configuring HDMI audio for pixel clock 148500 (0x00090000) [ 39.333957] [drm:haswell_write_eld] port num:0 [ 39.333958] [drm:haswell_write_eld] ELD size 9 [ 39.355536] [drm:intel_update_fbc] more than one pipe active, disabling compression [ 39.355548] [drm:intel_connector_check_state] [CONNECTOR:18:eDP-1] [ 39.355552] [drm:intel_connector_check_state] [CONNECTOR:26:HDMI-A-1] [ 39.355555] [drm:check_encoder_state] [ENCODER:17:TMDS-17] [ 39.355558] [drm:check_encoder_state] [ENCODER:25:TMDS-25] [ 39.355561] [drm:check_crtc_state] [CRTC:7] [ 39.355570] [drm:check_crtc_state] [CRTC:11] [ 39.355578] [drm:check_crtc_state] [CRTC:15] [ 39.355581] [drm:check_shared_dpll_state] WRPLL 1 [ 39.355584] [drm:check_shared_dpll_state] WRPLL 2 [ 39.355590] [drm:intel_crtc_set_config] [CRTC:15] [NOFB] [ 39.355594] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:15], mode_changed=0, fb_changed=0 [ 39.355597] [drm:intel_modeset_stage_output_state] [CONNECTOR:18:eDP-1] to [CRTC:7] [ 39.355599] [drm:intel_modeset_stage_output_state] [CONNECTOR:26:HDMI-A-1] to [CRTC:11] [ 39.792736] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 39.792746] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007