[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.17.0-rc2_drm-intel-nightly_4144c9_20140904+ (buildtopcommit@x-kernel) (gcc version 4.7.0 20120507 (Red Hat 4.7.0-5) (GCC) ) #2116 SMP Thu Sep 4 11:24:40 CST 2014 [ 0.000000] Command line: BOOT_IMAGE=kernels//nightly_parents/2014_09_04/drm-intel-nightly/4144c90b76dfe6eaa2205ac947090786b5091cff/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//nightly_parents/2014_09_04/drm-intel-nightly/4144c90b76dfe6eaa2205ac947090786b5091cff/modules_x86_64/lib/modules/3.17.0-rc2_drm-intel-nightly_4144c9_20140904+ acpi_rsdp=0xac7e1014 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000100-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ac1dbfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ac1dc000-0x00000000ac743fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ac744000-0x00000000ac796fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ac797000-0x00000000ac7e1fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000ac7e2000-0x00000000ac7fefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI not present or invalid. [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x14f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable [ 0.000000] 1 base 00B0000000 mask 7FF0000000 uncachable [ 0.000000] 2 base 00AE000000 mask 7FFE000000 uncachable [ 0.000000] 3 base 00AD800000 mask 7FFF800000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xac7ff max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x033c6000, 0x033c6fff] PGTABLE [ 0.000000] BRK [0x033c7000, 0x033c7fff] PGTABLE [ 0.000000] BRK [0x033c8000, 0x033c8fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x14ee00000-0x14effffff] [ 0.000000] [mem 0x14ee00000-0x14effffff] page 2M [ 0.000000] BRK [0x033c9000, 0x033c9fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x14c000000-0x14edfffff] [ 0.000000] [mem 0x14c000000-0x14edfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x14bffffff] [ 0.000000] [mem 0x100000000-0x13fffffff] page 1G [ 0.000000] [mem 0x140000000-0x14bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xac1dbfff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G [ 0.000000] [mem 0x80000000-0xabffffff] page 2M [ 0.000000] [mem 0xac000000-0xac1dbfff] page 4k [ 0.000000] init_memory_mapping: [mem 0xac7e2000-0xac7fefff] [ 0.000000] [mem 0xac7e2000-0xac7fefff] page 4k [ 0.000000] BRK [0x033ca000, 0x033cafff] PGTABLE [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000AC7E1014 000024 (v02 INTEL ) [ 0.000000] ACPI: XSDT 0x00000000AC7A9188 000114 (v01 INTEL BDW-ULT 00000000 01000013) [ 0.000000] ACPI: FACP 0x00000000AC7D7000 0000F4 (v05 INTEL BDW-ULT 00000000 MSFT 0000005F) [ 0.000000] ACPI: DSDT 0x00000000AC7B4000 01ED20 (v02 INTEL BDW 00000000 INTL 20130927) [ 0.000000] ACPI: FACS 0x00000000AC77E000 000040 [ 0.000000] ACPI: TCPA 0x00000000AC7DF000 000032 (v02 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: UEFI 0x00000000AC781000 000042 (v01 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: SSDT 0x00000000AC7DE000 0004B5 (v01 Intel_ Tpm2Tabl 00001000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AC7DD000 00004E (v01 MeSsdt MeSsdt 00003000 INTL 20130927) [ 0.000000] ACPI: TPM2 0x00000000AC7DC000 000034 (v03 00000000 00000000) [ 0.000000] ACPI: SSDT 0x00000000AC7DB000 0005B1 (v01 Intel PerfTune 00001000 INTL 20130927) [ 0.000000] ACPI: DBGP 0x00000000AC7DA000 000034 (v01 INTEL 00000000 MSFT 0000005F) [ 0.000000] ACPI: DBG2 0x00000000AC7D9000 000054 (v00 INTEL 00000000 MSFT 0000005F) [ 0.000000] ACPI: LPIT 0x00000000AC7D8000 000094 (v01 INTEL BDW-ULT 00000000 MSFT 0000005F) [ 0.000000] ACPI: HPET 0x00000000AC7D6000 000038 (v01 INTEL BDW-ULT 00000001 MSFT 0000005F) [ 0.000000] ACPI: APIC 0x00000000AC7D5000 0000BC (v01 INTEL BDW-ULT 00000001 MSFT 0000005F) [ 0.000000] ACPI: MCFG 0x00000000AC7D4000 00003C (v01 INTEL BDW-ULT 00000001 MSFT 0000005F) [ 0.000000] ACPI: WDAT 0x00000000AC7D3000 000104 (v01 INTEL BDW-ULT 00000000 MSFT 0000005F) [ 0.000000] ACPI: SSDT 0x00000000AC7B3000 000250 (v01 INTEL sensrhub 00000000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AC7AF000 00340B (v01 INTEL PtidDevc 00001000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AC7AE000 000C7D (v01 INTEL Ther_Rvp 00001000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AC7AD000 00017F (v01 INTEL zpodd 00001000 INTL 20130927) [ 0.000000] ACPI: BOOT 0x00000000AC7AC000 000028 (v01 INTEL TIANO 00000002 MSFT 01000013) [ 0.000000] ACPI: SSDT 0x00000000AC7AB000 00057D (v01 PmRef Cpu0Ist 00003000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AC7AA000 000B74 (v01 CpuRef CpuSsdt 00003000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AC7A2000 006F08 (v01 SaSsdt SaSsdt 00003000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AC7E0000 0006A7 (v01 CppcTa CppcTabl 00001000 INTL 20130927) [ 0.000000] ACPI: PCCT 0x00000000AC7A1000 00006E (v05 PcctTa PcctTabl 00001000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AC7A0000 000AC4 (v01 Cpc_Ta Cpc_Tabl 00001000 INTL 20130927) [ 0.000000] ACPI: CSRT 0x00000000AC79F000 0000C4 (v01 INTL BDW-ULT 00000001 INTL 20100528) [ 0.000000] ACPI: DMAR 0x00000000AC79E000 0000F0 (v01 INTEL BDW 00000001 INTL 00000001) [ 0.000000] ACPI: FPDT 0x00000000AC79D000 000044 (v01 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: ASF! 0x00000000AC79C000 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: BGRT 0x00000000AC79B000 000038 (v01 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000014effffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x14effffff] [ 0.000000] NODE_DATA [mem 0x14effa000-0x14effdfff] [ 0.000000] [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014a600000-ffff88014e5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x14effffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x00057fff] [ 0.000000] node 0: [mem 0x00059000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xac1dbfff] [ 0.000000] node 0: [mem 0xac7e2000-0xac7fefff] [ 0.000000] node 0: [mem 0x100000000-0x14effffff] [ 0.000000] On node 0 totalpages: 1028502 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 26 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10952 pages used for memmap [ 0.000000] DMA32 zone: 700921 pages, LIFO batch:31 [ 0.000000] Normal zone: 5056 pages used for memmap [ 0.000000] Normal zone: 323584 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0xae000000-0xafffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xac1dc000-0xac743fff] [ 0.000000] PM: Registered nosave memory: [mem 0xac744000-0xac796fff] [ 0.000000] PM: Registered nosave memory: [mem 0xac797000-0xac7e1fff] [ 0.000000] PM: Registered nosave memory: [mem 0xac7ff000-0xadffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xae000000-0xafffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb0000000-0xe00f7fff] [ 0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff] [ 0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xff9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff] [ 0.000000] e820: [mem 0xb0000000-0xe00f7fff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88014ec00000 s78528 r8192 d23872 u262144 [ 0.000000] pcpu-alloc: s78528 r8192 d23872 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1012404 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=kernels//nightly_parents/2014_09_04/drm-intel-nightly/4144c90b76dfe6eaa2205ac947090786b5091cff/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//nightly_parents/2014_09_04/drm-intel-nightly/4144c90b76dfe6eaa2205ac947090786b5091cff/modules_x86_64/lib/modules/3.17.0-rc2_drm-intel-nightly_4144c9_20140904+ acpi_rsdp=0xac7e1014 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3944664K/4114008K available (7777K kernel code, 901K rwdata, 3976K rodata, 23300K init, 624K bss, 169344K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS:4352 nr_irqs:760 0 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2095.116 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4190.23 BogoMIPS (lpj=2095116) [ 0.000007] pid_max: default: 32768 minimum: 301 [ 0.000013] ACPI: Core revision 20140724 [ 0.026909] ACPI: All ACPI Tables successfully acquired [ 0.026938] Security Framework initialized [ 0.027195] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.027968] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.028317] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.028324] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.028534] CPU: Physical Processor ID: 0 [ 0.028537] CPU: Processor Core ID: 0 [ 0.029633] mce: CPU supports 7 MCE banks [ 0.029644] CPU0: Thermal LVT vector (0xfa) already installed [ 0.029652] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.029652] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.030073] Freeing SMP alternatives memory: 32K (ffffffff83321000 - ffffffff83329000) [ 0.030722] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.040731] smpboot: CPU0: Intel(R) Core(TM) i3-5010U CPU @ 2.10GHz (fam: 06, model: 3d, stepping: 04) [ 0.040741] TSC deadline timer enabled [ 0.040763] Performance Events: PEBS fmt2+, generic architected perfmon, full-width counters, Intel PMU driver. [ 0.040771] ... version: 3 [ 0.040773] ... bit width: 48 [ 0.040775] ... generic registers: 4 [ 0.040777] ... value mask: 0000ffffffffffff [ 0.040779] ... max period: 0000ffffffffffff [ 0.040781] ... fixed-purpose events: 3 [ 0.040783] ... event mask: 000000070000000f [ 0.041070] x86: Booting SMP configuration: [ 0.041073] .... node #0, CPUs: #1 [ 0.053323] CPU1: Thermal LVT vector (0xfa) already installed [ 0.055471] #2<7>[ 0.067766] CPU2: Thermal LVT vector (0xfa) already installed [ 0.082163] #3 [ 0.082163] CPU3: Thermal LVT vector (0xfa) already installed [ 0.084257] x86: Booted up 1 node, 4 CPUs [ 0.084264] smpboot: Total of 4 processors activated (16760.92 BogoMIPS) [ 0.087918] devtmpfs: initialized [ 0.088241] PM: Registering ACPI NVS region [mem 0xac744000-0xac796fff] (339968 bytes) [ 0.088442] xor: automatically using best checksumming function: [ 0.097717] avx : 20140.000 MB/sec [ 0.097757] RTC time: 20:07:25, date: 09/04/14 [ 0.097857] NET: Registered protocol family 16 [ 0.098082] cpuidle: using governor ladder [ 0.098087] cpuidle: using governor menu [ 0.098196] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.098199] ACPI: bus type PCI registered [ 0.098240] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.098244] PCI: not using MMCONFIG [ 0.098246] PCI: Using configuration type 1 for base access [ 0.117760] raid6: sse2x1 6480 MB/s [ 0.134788] raid6: sse2x2 7816 MB/s [ 0.151820] raid6: sse2x4 9363 MB/s [ 0.168846] raid6: avx2x1 12738 MB/s [ 0.185878] raid6: avx2x2 14546 MB/s [ 0.202907] raid6: avx2x4 16957 MB/s [ 0.202909] raid6: using algorithm avx2x4 (16957 MB/s) [ 0.202912] raid6: using avx2x2 recovery algorithm [ 0.202951] ACPI: Added _OSI(Module Device) [ 0.202954] ACPI: Added _OSI(Processor Device) [ 0.202956] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.202958] ACPI: Added _OSI(Processor Aggregator Device) [ 0.214633] ACPI: Executed 18 blocks of module-level executable AML code [ 0.248144] ACPI: Dynamic OEM Table Load: [ 0.248162] ACPI: SSDT 0xFFFF8801497CE800 0004AE (v01 PmRef Cpu0Cst 00003001 INTL 20130927) [ 0.254293] ACPI: Dynamic OEM Table Load: [ 0.254309] ACPI: SSDT 0xFFFF8801497CE000 000792 (v01 PmRef ApIst 00003000 INTL 20130927) [ 0.259164] ACPI: Dynamic OEM Table Load: [ 0.259177] ACPI: SSDT 0xFFFF880148C31400 000119 (v01 PmRef ApCst 00003000 INTL 20130927) [ 0.267182] ACPI: Interpreter enabled [ 0.267191] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580) [ 0.267200] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580) [ 0.267223] ACPI: (supports S0 S3 S4 S5) [ 0.267225] ACPI: Using IOAPIC for interrupt routing [ 0.267248] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.269367] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.269611] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.270073] ACPI: Power Resource [PG00] (on) [ 0.274409] ACPI: Power Resource [PG01] (on) [ 0.278403] ACPI: Power Resource [PG02] (on) [ 0.306259] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1) [ 0.307536] ACPI: Power Resource [FN00] (off) [ 0.307616] ACPI: Power Resource [FN01] (off) [ 0.307690] ACPI: Power Resource [FN02] (off) [ 0.307763] ACPI: Power Resource [FN03] (off) [ 0.307836] ACPI: Power Resource [FN04] (off) [ 0.308846] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.308854] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.309676] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.310202] PCI host bridge to bus 0000:00 [ 0.310206] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.310210] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.310213] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.310216] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.310219] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfeafffff] [ 0.310229] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000 [ 0.310462] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000 [ 0.310475] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd0ffffff 64bit] [ 0.310483] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.310488] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.310706] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300 [ 0.310714] pci 0000:00:03.0: reg 0x10: [mem 0xd1030000-0xd1033fff 64bit] [ 0.310951] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330 [ 0.310970] pci 0000:00:14.0: reg 0x10: [mem 0xd1020000-0xd102ffff 64bit] [ 0.311027] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.311205] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.311252] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000 [ 0.311270] pci 0000:00:16.0: reg 0x10: [mem 0xd1035000-0xd103501f 64bit] [ 0.311330] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.311545] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000 [ 0.311561] pci 0000:00:19.0: reg 0x10: [mem 0xd1000000-0xd101ffff] [ 0.311569] pci 0000:00:19.0: reg 0x14: [mem 0xd1038000-0xd1038fff] [ 0.311577] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f] [ 0.311633] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.311809] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.311856] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100 [ 0.312165] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601 [ 0.312179] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af] [ 0.312186] pci 0000:00:1f.2: reg 0x14: [io 0x30b4-0x30b7] [ 0.312193] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7] [ 0.312200] pci 0000:00:1f.2: reg 0x1c: [io 0x30b0-0x30b3] [ 0.312207] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.312215] pci 0000:00:1f.2: reg 0x24: [mem 0xd1037000-0xd10377ff] [ 0.312253] pci 0000:00:1f.2: PME# supported from D3hot [ 0.312454] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500 [ 0.312468] pci 0000:00:1f.3: reg 0x10: [mem 0xd1034000-0xd10340ff 64bit] [ 0.312487] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.312707] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000 [ 0.312735] pci 0000:00:1f.6: reg 0x10: [mem 0xd1036000-0xd1036fff 64bit] [ 0.313010] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported) [ 0.315182] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15), disabled. [ 0.315236] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.315290] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15), disabled. [ 0.315340] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15), disabled. [ 0.315389] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15), disabled. [ 0.315438] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.315487] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.315537] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.316056] ACPI: Enabled 4 GPEs in block 00 to 7F [ 0.316264] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62 [ 0.316371] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.316375] vgaarb: loaded [ 0.316377] vgaarb: bridge control possible 0000:00:02.0 [ 0.316461] SCSI subsystem initialized [ 0.316511] libata version 3.00 loaded. [ 0.316556] ACPI: bus type USB registered [ 0.316586] usbcore: registered new interface driver usbfs [ 0.316603] usbcore: registered new interface driver hub [ 0.316631] usbcore: registered new device driver usb [ 0.316668] pps_core: LinuxPPS API ver. 1 registered [ 0.316671] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.316680] PTP clock support registered [ 0.316766] PCI: Using ACPI for IRQ routing [ 0.322583] PCI: pci_cache_line_size set to 64 bytes [ 0.322609] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.322611] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.322613] e820: reserve RAM buffer [mem 0xac1dc000-0xafffffff] [ 0.322614] e820: reserve RAM buffer [mem 0xac7ff000-0xafffffff] [ 0.322616] e820: reserve RAM buffer [mem 0x14f000000-0x14fffffff] [ 0.322734] NetLabel: Initializing [ 0.322736] NetLabel: domain hash size = 128 [ 0.322738] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.322751] NetLabel: unlabeled traffic allowed by default [ 0.322868] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.322876] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.324907] Switched to clocksource hpet [ 0.328368] pnp: PnP ACPI init [ 0.328670] system 00:00: [io 0x06a4] has been reserved [ 0.328674] system 00:00: [io 0x06a0] has been reserved [ 0.328678] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.328858] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.328861] system 00:01: [io 0xffff] has been reserved [ 0.328864] system 00:01: [io 0xffff] has been reserved [ 0.328867] system 00:01: [io 0xffff] has been reserved [ 0.328870] system 00:01: [io 0x1800-0x18fe] could not be reserved [ 0.328873] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.328877] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.328929] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.328966] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.328970] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.329079] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.329154] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.329744] system 00:06: [mem 0xfe102000-0xfe102fff] has been reserved [ 0.329748] system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved [ 0.329751] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved [ 0.329754] system 00:06: [mem 0xfe10e000-0xfe10efff] has been reserved [ 0.329757] system 00:06: [mem 0xfe112000-0xfe112fff] has been reserved [ 0.329761] system 00:06: [mem 0xfe111000-0xfe111007] has been reserved [ 0.329764] system 00:06: [mem 0xfe111014-0xfe111fff] has been reserved [ 0.329767] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.330882] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.330886] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.330889] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.330892] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.330896] system 00:07: [mem 0xe0000000-0xefffffff] could not be reserved [ 0.330899] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.330902] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.330905] system 00:07: [mem 0xfed45000-0xfed8ffff] could not be reserved [ 0.330918] system 00:07: [mem 0xff000000-0xffffffff] could not be reserved [ 0.330922] system 00:07: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.330925] system 00:07: [mem 0xb0010000-0xb001ffff] has been reserved [ 0.330928] system 00:07: [mem 0xb0000000-0xb000ffff] has been reserved [ 0.330932] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.331173] system 00:08: [mem 0x00000000-0x0009cfff] could not be reserved [ 0.331177] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.331311] pnp: PnP ACPI: found 9 devices [ 0.337966] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.337970] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.337972] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.337974] pci_bus 0000:00: resource 7 [mem 0xb0000000-0xfeafffff] [ 0.338004] NET: Registered protocol family 2 [ 0.338207] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.338276] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.338340] TCP: Hash tables configured (established 32768 bind 32768) [ 0.338361] TCP: reno registered [ 0.338372] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.338388] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.338442] NET: Registered protocol family 1 [ 0.338522] RPC: Registered named UNIX socket transport module. [ 0.338528] RPC: Registered udp transport module. [ 0.338530] RPC: Registered tcp transport module. [ 0.338532] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.338552] pci 0000:00:02.0: Boot video device [ 0.338644] pci 0000:00:14.0: can't derive routing for PCI INT A [ 0.338647] pci 0000:00:14.0: PCI INT A: no GSI [ 0.338730] pci 0000:00:14.0: can't derive routing for PCI INT A [ 0.338747] PCI: CLS 0 bytes, default 64 [ 0.789897] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.789905] software IO TLB [mem 0xa81dc000-0xac1dc000] (64MB) mapped at [ffff8800a81dc000-ffff8800ac1dbfff] [ 0.790030] Simple Boot Flag at 0x47 set to 0x80 [ 0.790801] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.790838] audit: initializing netlink subsys (disabled) [ 0.790854] audit: type=2000 audit(1409861244.750:1): initialized [ 0.791055] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.792673] VFS: Disk quotas dquot_6.5.2 [ 0.792710] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.793325] NFS: Registering the id_resolver key type [ 0.793336] Key type id_resolver registered [ 0.793338] Key type id_legacy registered [ 0.793344] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.793500] fuse init (API version 7.23) [ 0.793590] msgmni has been set to 7704 [ 0.793850] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.793857] io scheduler noop registered [ 0.793862] io scheduler deadline registered [ 0.793894] io scheduler cfq registered (default) [ 0.793980] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.794096] ACPI: Fan [FAN0] (off) [ 0.794122] ACPI: Fan [FAN1] (off) [ 0.794157] ACPI: Fan [FAN2] (off) [ 0.794182] ACPI: Fan [FAN3] (off) [ 0.794207] ACPI: Fan [FAN4] (off) [ 0.794557] Monitor-Mwait will be used to enter C-1 state [ 0.796150] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.796165] ACPI: Thermal Zone [TZ00] (46 C) [ 0.796867] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.796870] ACPI: Thermal Zone [TZ01] (46 C) [ 0.796921] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.817606] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.818049] Non-volatile memory driver v1.3 [ 0.818056] Linux agpgart interface v0.103 [ 0.819370] brd: module loaded [ 0.819432] Loading iSCSI transport class v2.0-870. [ 0.819583] iscsi: registered transport (tcp) [ 0.819678] Adaptec aacraid driver 1.2-0[30300]-ms [ 0.819701] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 0.819796] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.08-k. [ 0.819840] iscsi: registered transport (qla4xxx) [ 0.819862] QLogic iSCSI HBA Driver [ 0.819903] DC390: clustering now enabled by default. If you get problems load [ 0.819906] with "disable_clustering=1" and report to maintainers [ 0.819949] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 0.820004] RocketRAID 3xxx/4xxx Controller driver v1.8 [ 0.820024] stex: Promise SuperTrak EX Driver version: 4.6.0000.4 [ 0.820071] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 0.820097] osst :I: Tape driver with OnStream support version 0.99.4 [ 0.820097] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 0.820187] SCSI Media Changer driver v0.25 [ 0.820223] ahci 0000:00:1f.2: version 3.0 [ 0.820360] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X [ 0.831212] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x2 impl SATA mode [ 0.831217] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 0.831686] scsi host0: ahci [ 0.831782] scsi host1: ahci [ 0.831856] scsi host2: ahci [ 0.831930] scsi host3: ahci [ 0.831970] ata1: DUMMY [ 0.831974] ata2: SATA max UDMA/133 abar m2048@0xd1037000 port 0xd1037180 irq 40 [ 0.831977] ata3: DUMMY [ 0.831978] ata4: DUMMY [ 0.832978] cnic: QLogic NetXtreme II CNIC Driver cnic v2.5.20 (March 14, 2014) [ 0.833006] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.19-0 (2014/02/10) [ 0.833093] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 0.833097] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.833120] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 0.833123] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.833145] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 0.833147] e1000e: Copyright(c) 1999 - 2014 Intel Corporation. [ 0.833296] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.833314] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X [ 0.997705] e1000e 0000:00:19.0 eth0: registered PHC clock [ 0.997711] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:13:20:fc:d6:b4 [ 0.997714] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 0.997743] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 0.997762] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.13-k [ 0.997764] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.997794] usbcore: registered new interface driver catc [ 0.997807] usbcore: registered new interface driver kaweth [ 0.997811] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 0.997822] usbcore: registered new interface driver pegasus [ 0.997835] usbcore: registered new interface driver rtl8150 [ 0.997849] usbcore: registered new interface driver asix [ 0.997861] usbcore: registered new interface driver ax88179_178a [ 0.997874] usbcore: registered new interface driver cdc_ether [ 0.997886] usbcore: registered new interface driver dm9601 [ 0.997898] usbcore: registered new interface driver gl620a [ 0.997910] usbcore: registered new interface driver net1080 [ 0.997922] usbcore: registered new interface driver plusb [ 0.997934] usbcore: registered new interface driver rndis_host [ 0.997946] usbcore: registered new interface driver cdc_subset [ 0.997958] usbcore: registered new interface driver zaurus [ 0.997970] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 0.997989] usbcore: registered new interface driver cdc_ncm [ 0.998074] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.998079] ehci-pci: EHCI PCI platform driver [ 0.998109] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.998115] ohci-pci: OHCI PCI platform driver [ 0.998129] uhci_hcd: USB Universal Host Controller Interface driver [ 0.998224] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A [ 0.998227] xhci_hcd 0000:00:14.0: PCI INT A: no GSI [ 0.998248] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.998302] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.998391] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.998407] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X [ 0.998463] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.998467] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.998470] usb usb1: Product: xHCI Host Controller [ 0.998473] usb usb1: Manufacturer: Linux 3.17.0-rc2_drm-intel-nightly_4144c9_20140904+ xhci_hcd [ 0.998476] usb usb1: SerialNumber: 0000:00:14.0 [ 0.998582] hub 1-0:1.0: USB hub found [ 0.998596] hub 1-0:1.0: 11 ports detected [ 1.001883] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.001923] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.001954] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.001957] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.001961] usb usb2: Product: xHCI Host Controller [ 1.001963] usb usb2: Manufacturer: Linux 3.17.0-rc2_drm-intel-nightly_4144c9_20140904+ xhci_hcd [ 1.001967] usb usb2: SerialNumber: 0000:00:14.0 [ 1.002064] hub 2-0:1.0: USB hub found [ 1.002073] hub 2-0:1.0: 4 ports detected [ 1.002878] usb: failed to peer usb2-port3 and usb1-port3 by location (usb2-port3:none) (usb1-port3:usb2-port2) [ 1.002883] usb usb2-port3: failed to peer to usb1-port3 (-16) [ 1.002885] usb: port power management may be unreliable [ 1.003355] usbcore: registered new interface driver usb-storage [ 1.003396] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.003398] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.003802] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.003876] mousedev: PS/2 mouse device common for all mice [ 1.003969] rtc_cmos 00:02: RTC can wake from S4 [ 1.004104] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.004134] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.004148] i2c /dev entries driver [ 1.004177] hidraw: raw HID events driver (C) Jiri Kosina [ 1.004416] usbcore: registered new interface driver usbhid [ 1.004419] usbhid: USB HID core driver [ 1.004486] TCP: cubic registered [ 1.004490] Initializing XFRM netlink socket [ 1.004497] NET: Registered protocol family 17 [ 1.004522] Key type dns_resolver registered [ 1.004883] registered taskstats version 1 [ 1.005304] Btrfs loaded [ 1.005569] Magic number: 14:504:143 [ 1.005582] block ram8: hash matches [ 1.005634] acpi device:14: hash matches [ 1.005691] PM: Hibernation image not present or could not be loaded. [ 1.005704] Warning: unable to open an initial console. [ 1.136362] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.136613] ata2.00: ATA-9: INTEL SSDSC2BB240G4, D2010370, max UDMA/133 [ 1.136619] ata2.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 1.136906] ata2.00: configured for UDMA/133 [ 1.137003] scsi 1:0:0:0: Direct-Access ATA INTEL SSDSC2BB24 0370 PQ: 0 ANSI: 5 [ 1.137183] sd 1:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB) [ 1.137185] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 1.137193] sd 1:0:0:0: [sda] 4096-byte physical blocks [ 1.137266] sd 1:0:0:0: [sda] Write Protect is off [ 1.137270] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.137295] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.138753] sda: sda1 sda2 sda3 [ 1.139016] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.143185] Freeing unused kernel memory: 23300K (ffffffff81c60000 - ffffffff83321000) [ 1.174687] dracut: dracut-018-35.git20120510.fc17 [ 1.199197] udevd[1432]: starting version 182 [ 1.214892] [drm] Initialized drm 1.1.0 20060810 [ 1.215920] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 1.219919] ACPI: Lid Switch [LID0] [ 1.220008] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 1.220064] ACPI: Power Button [PWRB] [ 1.220121] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3 [ 1.220171] ACPI: Sleep Button [SLPB] [ 1.220247] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 1.220382] ACPI: Power Button [PWRF] [ 1.224511] [drm:i915_dump_device_info] i915 device info: gen=8, pciid=0x1616 rev=0x08 flags=is_mobile,need_gfx_hws,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg, [ 1.224532] [drm:intel_detect_pch] This is Broadwell, assuming LynxPoint LP PCH [ 1.224610] [drm] Memory usable by graphics device = 4096M [ 1.224617] [drm:i915_gem_gtt_init] GMADR size = 256M [ 1.224619] [drm:i915_gem_gtt_init] GTT stolen size = 32M [ 1.224621] [drm:i915_gem_gtt_init] ppgtt mode: 1 [ 1.224623] [drm] Replacing VGA console driver [ 1.225675] [drm:intel_opregion_setup] graphic opregion physical addr: 0xac776018 [ 1.225686] [drm:intel_opregion_setup] Public ACPI methods supported [ 1.225689] [drm:intel_opregion_setup] SWSCI supported [ 1.231410] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00700483 [ 1.231413] [drm:intel_opregion_setup] ASLE supported [ 1.231510] i915 0000:00:02.0: irq 43 for MSI/MSI-X [ 1.231521] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.231526] [drm] Driver supports precise vblank timestamp query. [ 1.231529] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz [ 1.231531] [drm:validate_vbt] Using VBT from OpRegion: $VBT HASWELL d [ 1.231534] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 1.231535] [drm:parse_general_definitions] crt_ddc_bus_pin: 2 [ 1.231537] [drm:parse_lfp_panel_data] DRRS supported mode is static [ 1.231539] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [ 1.231542] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 0 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x8 0xa [ 1.231544] [drm:parse_lfp_panel_data] VBT initial LVDS value 30033c [ 1.231546] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255 [ 1.231548] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables: [ 1.231551] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 1.231552] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT [ 1.231554] [drm:parse_driver_features] DRRS State Enabled:1 [ 1.231556] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 [ 1.231558] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0 [ 1.231560] [drm:parse_ddi_port] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.231561] [drm:parse_ddi_port] VBT HDMI level shift for port B: 3 [ 1.231564] [drm:parse_ddi_port] Port C VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.231565] [drm:parse_ddi_port] VBT HDMI level shift for port C: 3 [ 1.231617] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 1.231624] [drm:i915_gem_init_stolen] found 33554432 bytes of stolen memory at ae000000 [ 1.231626] [drm:intel_display_power_get] enabling always-on [ 1.231628] [drm:intel_display_power_get] enabling display [ 1.231631] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.231700] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec) [ 1.231702] [drm:intel_print_wm_latency] Primary WM1 latency 50 (25.0 usec) [ 1.231704] [drm:intel_print_wm_latency] Primary WM2 latency 90 (45.0 usec) [ 1.231705] [drm:intel_print_wm_latency] Primary WM3 latency 130 (65.0 usec) [ 1.231707] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec) [ 1.231708] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec) [ 1.231710] [drm:intel_print_wm_latency] Sprite WM1 latency 50 (25.0 usec) [ 1.231711] [drm:intel_print_wm_latency] Sprite WM2 latency 90 (45.0 usec) [ 1.231713] [drm:intel_print_wm_latency] Sprite WM3 latency 130 (65.0 usec) [ 1.231714] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec) [ 1.231716] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec) [ 1.231717] [drm:intel_print_wm_latency] Cursor WM1 latency 50 (25.0 usec) [ 1.231719] [drm:intel_print_wm_latency] Cursor WM2 latency 90 (45.0 usec) [ 1.231720] [drm:intel_print_wm_latency] Cursor WM3 latency 130 (65.0 usec) [ 1.231721] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec) [ 1.231724] [drm:intel_modeset_init] 3 display pipes available. [ 1.231736] [drm:intel_ddi_pll_init] CDCLK running at 675000KHz [ 1.232046] [drm:intel_dp_init_connector] Adding eDP connector on port A [ 1.232106] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000 [ 1.232109] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 1.232112] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600 [ 1.232114] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200 [ 1.232116] [drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1 [ 1.232216] [drm:edp_panel_vdd_on] Turning eDP VDD on [ 1.232224] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 1.232491] [drm:intel_dp_get_dpcd] DPCD: 11 0a 02 00 00 00 00 00 00 00 00 00 00 00 00 [ 1.232656] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 [ 1.255061] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.255063] [drm:intel_dp_drrs_init] VBT doesn't support DRRS [ 1.255094] [drm:intel_panel_setup_backlight] backlight initialized, enabled, brightness 937/937, sysfs interface registered [ 1.255105] [drm:intel_dp_init_connector] Adding DP connector on port B [ 1.255150] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1 [ 1.260429] [drm:intel_modeset_readout_hw_state] [CRTC:8] hw state readout: enabled [ 1.260431] [drm:intel_modeset_readout_hw_state] [CRTC:12] hw state readout: disabled [ 1.260433] [drm:intel_modeset_readout_hw_state] [CRTC:16] hw state readout: disabled [ 1.260435] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: refcount 0, on 0 [ 1.260437] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: refcount 0, on 0 [ 1.260441] [drm:intel_modeset_readout_hw_state] [ENCODER:18:TMDS-18] hw state readout: enabled, pipe A [ 1.260443] [drm:intel_modeset_readout_hw_state] [ENCODER:27:TMDS-27] hw state readout: disabled, pipe A [ 1.260445] [drm:intel_modeset_readout_hw_state] [ENCODER:29:DP MST-29] hw state readout: disabled, pipe A [ 1.260446] [drm:intel_modeset_readout_hw_state] [ENCODER:30:DP MST-30] hw state readout: disabled, pipe B [ 1.260448] [drm:intel_modeset_readout_hw_state] [ENCODER:31:DP MST-31] hw state readout: disabled, pipe C [ 1.260450] [drm:intel_modeset_readout_hw_state] [ENCODER:34:TMDS-34] hw state readout: disabled, pipe A [ 1.260452] [drm:intel_modeset_readout_hw_state] [CONNECTOR:19:eDP-1] hw state readout: enabled [ 1.260454] [drm:intel_modeset_readout_hw_state] [CONNECTOR:28:DP-1] hw state readout: disabled [ 1.260456] [drm:intel_modeset_readout_hw_state] [CONNECTOR:32:HDMI-A-1] hw state readout: disabled [ 1.260458] [drm:intel_modeset_readout_hw_state] [CONNECTOR:35:HDMI-A-2] hw state readout: disabled [ 1.260461] [drm:intel_dump_pipe_config] [CRTC:8][setup_hw_state] config for pipe A [ 1.260463] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 1.260464] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.260466] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.260468] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 1.260470] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.260472] [drm:intel_dump_pipe_config] requested mode: [ 1.260474] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 1920 0 0 0 1080 0 0 0 0x0 0x0 [ 1.260475] [drm:intel_dump_pipe_config] adjusted mode: [ 1.260478] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa [ 1.260480] [drm:intel_dump_crtc_timings] crtc timings: 138779 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x0 flags: 0xa [ 1.260481] [drm:intel_dump_pipe_config] port clock: 270000 [ 1.260483] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 1.260485] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.260486] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x07800438, enabled [ 1.260488] [drm:intel_dump_pipe_config] ips: 0 [ 1.260489] [drm:intel_dump_pipe_config] double wide: 0 [ 1.260491] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B [ 1.260493] [drm:i915_get_vblank_timestamp] crtc 1 is disabled [ 1.260497] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B [ 1.260499] [drm:intel_dump_pipe_config] [CRTC:12][setup_hw_state] config for pipe B [ 1.260500] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 1.260501] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 1.260503] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.260505] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.260507] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.260508] [drm:intel_dump_pipe_config] requested mode: [ 1.260510] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.260511] [drm:intel_dump_pipe_config] adjusted mode: [ 1.260513] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.260515] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.260517] [drm:intel_dump_pipe_config] port clock: 0 [ 1.260518] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 1.260520] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.260521] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.260522] [drm:intel_dump_pipe_config] ips: 0 [ 1.260524] [drm:intel_dump_pipe_config] double wide: 0 [ 1.260525] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C [ 1.260527] [drm:i915_get_vblank_timestamp] crtc 2 is disabled [ 1.260530] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C [ 1.260532] [drm:intel_dump_pipe_config] [CRTC:16][setup_hw_state] config for pipe C [ 1.260533] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 1.260534] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 1.260536] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.260538] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.260539] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.260540] [drm:intel_dump_pipe_config] requested mode: [ 1.260543] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.260544] [drm:intel_dump_pipe_config] adjusted mode: [ 1.260546] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.260548] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.260549] [drm:intel_dump_pipe_config] port clock: 0 [ 1.260550] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 1.260552] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.260553] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.260555] [drm:intel_dump_pipe_config] ips: 0 [ 1.260556] [drm:intel_dump_pipe_config] double wide: 0 [ 1.260561] [drm:intel_connector_check_state] [CONNECTOR:19:eDP-1] [ 1.260564] [drm:check_encoder_state] [ENCODER:18:TMDS-18] [ 1.260566] [drm:check_encoder_state] [ENCODER:27:TMDS-27] [ 1.260567] [drm:check_encoder_state] [ENCODER:29:DP MST-29] [ 1.260569] [drm:check_encoder_state] [ENCODER:30:DP MST-30] [ 1.260570] [drm:check_encoder_state] [ENCODER:31:DP MST-31] [ 1.260571] [drm:check_encoder_state] [ENCODER:34:TMDS-34] [ 1.260573] [drm:check_crtc_state] [CRTC:8] [ 1.260579] [drm:check_crtc_state] [CRTC:12] [ 1.260581] [drm:check_crtc_state] [CRTC:16] [ 1.260583] [drm:check_shared_dpll_state] WRPLL 1 [ 1.260585] [drm:check_shared_dpll_state] WRPLL 2 [ 1.260589] [drm:ironlake_get_plane_config] pipe/plane 0/0 with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000 [ 1.260591] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000 [ 1.260595] [drm:i915_pages_create_for_stolen] offset=0x0, size=8294400 [ 1.260599] [drm:intel_alloc_plane_obj] plane fb obj ffff880144440000 [ 1.260601] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 7e9000 [ 1.260603] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [7e9000, fffff000] [ 1.263510] [drm:gen8_ppgtt_init] Allocated 4 pages for page directories (0 wasted) [ 1.263512] [drm:gen8_ppgtt_init] Allocated 2048 pages for page tables (0 wasted) [ 1.263551] [drm:i915_gem_context_init] HW context support initialized [ 1.263558] [drm:init_status_page] render ring hws offset: 0x007fb000 [ 1.263633] [drm:intel_init_pipe_control] render ring pipe control offset: 0x0081c000 [ 1.263639] [drm:init_status_page] bsd ring hws offset: 0x0081d000 [ 1.263693] [drm:init_status_page] blitter ring hws offset: 0x0083e000 [ 1.263741] [drm:init_status_page] video enhancement ring hws offset: 0x0085f000 [ 1.263792] [drm:bdw_init_workarounds] Number of Workarounds applied: 8 [ 1.263947] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:eDP-1] [ 1.263951] [drm:intel_dp_detect] [CONNECTOR:19:eDP-1] [ 1.263964] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.263968] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:eDP-1] probed modes : [ 1.263971] [drm:drm_mode_debug_printmodeline] Modeline 20:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.263974] [drm:drm_mode_debug_printmodeline] Modeline 21:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa [ 1.263976] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] [ 1.263977] [drm:intel_dp_detect] [CONNECTOR:28:DP-1] [ 1.263982] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] disconnected [ 1.263984] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] [ 1.263986] [drm:intel_hdmi_detect] [CONNECTOR:32:HDMI-A-1] [ 1.264141] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 1.264143] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 1.264144] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] disconnected [ 1.264146] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] [ 1.264147] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-2] [ 1.264306] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 1.264307] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 1.264309] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] disconnected [ 1.264310] [drm:drm_setup_crtcs] [ 1.264312] [drm:drm_enable_connectors] connector 19 enabled? yes [ 1.264313] [drm:drm_enable_connectors] connector 28 enabled? no [ 1.264315] [drm:drm_enable_connectors] connector 32 enabled? no [ 1.264316] [drm:drm_enable_connectors] connector 35 enabled? no [ 1.264318] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 1.264320] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 [ 1.264322] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:8]: 1920x1080 [ 1.264323] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 1.264325] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 1.264326] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 1.264328] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 8 [ 1.264330] [drm:intelfb_create] no BIOS fb, allocating a new one [ 1.264332] [drm:i915_gem_object_create_stolen] creating stolen object: size=7e9000 [ 1.264337] [drm:i915_pages_create_for_stolen] offset=0x7e9000, size=8294400 [ 1.265159] [drm:intelfb_create] allocated 1920x1080 fb: 0x00881000, bo ffff880002bc8000 [ 1.265237] fbcon: inteldrmfb (fb0) is primary device [ 1.265322] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0) [ 1.265324] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set [ 1.265326] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.265328] [drm:drm_mode_debug_printmodeline] Modeline 37:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.265329] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=1, fb_changed=1 [ 1.265330] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 1.265333] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 1.265334] [drm:connected_sink_compute_bpp] [CONNECTOR:19:eDP-1] checking for sink bpp constrains [ 1.265337] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 1.265338] [drm:intel_dp_compute_config] forcing lane count to max (2) on BDW [ 1.265338] [drm:intel_dp_compute_config] using min 06 link bw per VBT [ 1.265343] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 1.265344] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 1.265346] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 1.265348] [drm:intel_dump_pipe_config] [CRTC:8][modeset] config for pipe A [ 1.265348] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 1.265349] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.265351] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.265353] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 1.265355] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.265356] [drm:intel_dump_pipe_config] requested mode: [ 1.265359] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.265359] [drm:intel_dump_pipe_config] adjusted mode: [ 1.265362] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.265365] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 1.265366] [drm:intel_dump_pipe_config] port clock: 270000 [ 1.265367] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 1.265368] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.265370] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.265371] [drm:intel_dump_pipe_config] ips: 1 [ 1.265371] [drm:intel_dump_pipe_config] double wide: 0 [ 1.265386] [drm:intel_edp_backlight_off] [ 1.270720] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.270803] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 1.270924] [drm] Initialized i915 1.6.0 20140822 for 0000:00:02.0 on minor 0 [ 1.354484] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 1.466525] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 1.480698] [drm:intel_edp_panel_off] Turn eDP power off [ 1.480701] [drm:wait_panel_off] Wait for panel power off time [ 1.480705] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 1.522773] usb 1-1: New USB device found, idVendor=07a6, idProduct=8515 [ 1.522774] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.522776] usb 1-1: Product: USB To LAN Converter [ 1.522777] usb 1-1: Manufacturer: ADMtek [ 1.522778] usb 1-1: SerialNumber: 0001 [ 1.523601] pegasus 1-1:1.0: setup Pegasus II specific registers [ 1.535541] [drm:wait_panel_status] Wait complete [ 1.535545] [drm:intel_update_fbc] no output, disabling [ 1.535550] [drm:intel_display_power_put] disabling display [ 1.535551] [drm:hsw_set_power_well] Requesting to disable the power well [ 1.535565] [drm:intel_edp_panel_on] Turn eDP power on [ 1.535568] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 1.624955] pegasus 1-1:1.0: eth1, ADMtek ADM8515 "Pegasus II" USB-2.0 Ethernet, 00:00:e8:00:05:c8 [ 1.790700] tsc: Refined TSC clocksource calibration: 2095.149 MHz [ 2.081842] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000 [ 2.103853] [drm:wait_panel_status] Wait complete [ 2.103857] [drm:wait_panel_on] Wait for panel power on [ 2.103859] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003 [ 2.252273] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6 [ 2.312962] [drm:wait_panel_status] Wait complete [ 2.312966] [drm:edp_panel_vdd_on] Turning eDP VDD on [ 2.312972] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 2.314056] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 2.314513] [drm:intel_dp_start_link_train] clock recovery OK [ 2.315272] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful [ 2.315512] [drm:intel_edp_backlight_on] [ 2.315514] [drm:intel_panel_enable_backlight] pipe A [ 2.315519] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 2.315523] [drm:intel_edp_psr_enable] PSR not supported by this panel [ 2.315529] [drm:ironlake_update_primary_plane] Writing base 00881000 00000000 0 0 7680 [ 2.350981] [drm:intel_update_fbc] disabled per chip default [ 2.350985] [drm:intel_connector_check_state] [CONNECTOR:19:eDP-1] [ 2.350988] [drm:check_encoder_state] [ENCODER:18:TMDS-18] [ 2.350989] [drm:check_encoder_state] [ENCODER:27:TMDS-27] [ 2.350990] [drm:check_encoder_state] [ENCODER:29:DP MST-29] [ 2.350991] [drm:check_encoder_state] [ENCODER:30:DP MST-30] [ 2.350991] [drm:check_encoder_state] [ENCODER:31:DP MST-31] [ 2.350992] [drm:check_encoder_state] [ENCODER:34:TMDS-34] [ 2.350993] [drm:check_crtc_state] [CRTC:8] [ 2.350999] [drm:check_crtc_state] [CRTC:12] [ 2.351000] [drm:check_crtc_state] [CRTC:16] [ 2.351001] [drm:check_shared_dpll_state] WRPLL 1 [ 2.351002] [drm:check_shared_dpll_state] WRPLL 2 [ 2.351015] [drm:intel_crtc_set_config] [CRTC:12] [NOFB] [ 2.351017] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0 [ 2.351018] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 2.351020] [drm:intel_crtc_set_config] [CRTC:16] [NOFB] [ 2.351021] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=0, fb_changed=0 [ 2.351022] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 2.351028] Console: switching to colour frame buffer device 240x67 [ 2.351035] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0) [ 2.351037] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 2.351038] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 2.359478] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.359516] i915 0000:00:02.0: registered panic notifier [ 2.363035] dracut: Starting plymouth daemon [ 2.369724] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0) [ 2.369728] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 2.369729] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 2.383684] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0) [ 2.383688] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 2.383689] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 2.450927] EXT4-fs (sda2): INFO: recovery required on readonly filesystem [ 2.450975] EXT4-fs (sda2): write access will be enabled during recovery [ 2.484599] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 2.484776] ACPI: AC Adapter [ADP1] (on-line) [ 2.498736] EXT4-fs (sda2): recovery complete [ 2.499048] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 2.519256] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 2.519361] ACPI: Battery Slot [BAT0] (battery present) [ 2.519469] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 2.519567] ACPI: Battery Slot [BAT1] (battery absent) [ 2.519730] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 2.519826] ACPI: Battery Slot [BAT2] (battery absent) [ 2.524092] dracut: Checking ext4: /dev/sda2 [ 2.524362] dracut: issuing e2fsck -a /dev/sda2 [ 2.530510] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 2.530705] [drm:intel_display_power_get] enabling display [ 2.530709] [drm:hsw_set_power_well] Enabling power well [ 2.530737] snd_hda_intel 0000:00:03.0: irq 44 for MSI/MSI-X [ 2.534346] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003) [ 2.534543] ACPI Warning: SystemIO range 0x000000000000efa0-0x000000000000efbf conflicts with OpRegion 0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI) (20140724/utaddress-258) [ 2.534707] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.536729] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 2.545378] dracut: /dev/sda2: clean, 950512/13598720 files, 26764003/54372608 blocks [ 2.546372] dracut: Remounting /dev/sda2 with -o errors=remount-ro,ro [ 2.552009] iTCO_vendor_support: vendor-support=0 [ 2.552257] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 2.552347] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860) [ 2.552542] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 2.555035] ppdev: user-space parallel port driver [ 2.557853] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0) [ 2.557858] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 2.557860] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 2.565658] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 2.567617] random: nonblocking pool is initialized [ 2.569218] dracut: Mounted root filesystem /dev/sda2 [ 2.578891] device-mapper: uevent: version 1.0.3 [ 2.581339] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 2.639249] dracut: Switching root [ 2.701368] init: ureadahead main process (2767) terminated with status 5 [ 2.747227] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 2.791247] Switched to clocksource tsc [ 3.819746] systemd-udevd[2885]: starting version 204 [ 3.910190] e1000e 0000:00:19.0 eth3: renamed from eth0 [ 3.925375] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0) [ 3.925379] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 3.925381] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 3.957610] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory [ 3.963226] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory [ 3.996028] pegasus 1-1:1.0 eth6: renamed from eth1 [ 3.997417] [drm:i915_gem_open] [ 3.997455] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0) [ 3.997461] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 3.997465] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 3.997468] [drm:intel_crtc_set_config] [CRTC:12] [NOFB] [ 3.997471] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0 [ 3.997474] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 3.997477] [drm:intel_crtc_set_config] [CRTC:16] [NOFB] [ 3.997479] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=0, fb_changed=0 [ 3.997482] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 3.997496] [drm:i915_gem_open] [ 3.997546] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 3.997551] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 3.997561] [drm:drm_mode_getconnector] [CONNECTOR:19:?] [ 3.997564] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:eDP-1] [ 3.997567] [drm:intel_dp_detect] [CONNECTOR:19:eDP-1] [ 3.997581] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 3.997587] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:eDP-1] probed modes : [ 3.997591] [drm:drm_mode_debug_printmodeline] Modeline 20:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 3.997596] [drm:drm_mode_debug_printmodeline] Modeline 21:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa [ 3.997600] [drm:drm_mode_getconnector] [CONNECTOR:19:?] [ 4.004255] [drm:drm_mode_getconnector] [CONNECTOR:28:?] [ 4.004261] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] [ 4.004264] [drm:intel_dp_detect] [CONNECTOR:28:DP-1] [ 4.004271] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] disconnected [ 4.004275] [drm:drm_mode_getconnector] [CONNECTOR:28:?] [ 4.004276] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] [ 4.004277] [drm:intel_dp_detect] [CONNECTOR:28:DP-1] [ 4.004281] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] disconnected [ 4.004285] [drm:drm_mode_getconnector] [CONNECTOR:32:?] [ 4.004287] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] [ 4.004289] [drm:intel_hdmi_detect] [CONNECTOR:32:HDMI-A-1] [ 4.004455] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 4.004459] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 4.004462] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] disconnected [ 4.004467] [drm:drm_mode_getconnector] [CONNECTOR:32:?] [ 4.004469] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] [ 4.004471] [drm:intel_hdmi_detect] [CONNECTOR:32:HDMI-A-1] [ 4.004627] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 4.004629] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 4.004631] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] disconnected [ 4.004636] [drm:drm_mode_getconnector] [CONNECTOR:35:?] [ 4.004638] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] [ 4.004639] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-2] [ 4.004810] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 4.004813] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 4.004815] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] disconnected [ 4.004819] [drm:drm_mode_getconnector] [CONNECTOR:35:?] [ 4.004820] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] [ 4.004821] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-2] [ 4.004988] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 4.004991] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 4.004994] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] disconnected [ 4.005013] [drm:drm_mode_addfb] [FB:36] [ 4.065475] Adding 16440316k swap on /dev/sda3. Priority:-1 extents:1 across:16440316k SS [ 4.084959] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 4.091678] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory [ 4.096526] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory [ 4.106564] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory [ 4.108487] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory [ 4.165543] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory [ 4.168555] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory [ 4.228856] init: Failed to spawn bluetooth main process: unable to execute: No such file or directory [ 4.239936] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 4.239946] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 4.259862] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory [ 4.266474] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory [ 4.274604] init: failsafe main process (3770) killed by TERM signal [ 4.558029] init: avahi-cups-reload main process (3965) terminated with status 1 [ 4.582283] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X [ 4.683202] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X [ 5.086882] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0) [ 5.086887] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 5.086890] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 5.086893] [drm:intel_crtc_set_config] [CRTC:12] [NOFB] [ 5.086895] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0 [ 5.086896] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 5.086898] [drm:intel_crtc_set_config] [CRTC:16] [NOFB] [ 5.086904] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=0, fb_changed=0 [ 5.086905] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 5.086937] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0) [ 5.086938] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 5.086939] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 601.415625] [drm:intel_edp_backlight_off] [ 601.616722] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 601.632736] [drm:edp_panel_vdd_on] Turning eDP VDD on [ 601.632742] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 601.632894] [drm:intel_edp_panel_off] Turn eDP power off [ 601.632897] [drm:wait_panel_off] Wait for panel power off time [ 601.632900] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 601.687758] [drm:wait_panel_status] Wait complete [ 601.687765] [drm:intel_update_fbc] no output, disabling [ 601.687767] [drm:intel_display_power_put] disabling always-on [ 601.687770] [drm:check_encoder_state] [ENCODER:18:TMDS-18] [ 601.687771] [drm:check_encoder_state] [ENCODER:27:TMDS-27] [ 601.687772] [drm:check_encoder_state] [ENCODER:29:DP MST-29] [ 601.687773] [drm:check_encoder_state] [ENCODER:30:DP MST-30] [ 601.687774] [drm:check_encoder_state] [ENCODER:31:DP MST-31] [ 601.687774] [drm:check_encoder_state] [ENCODER:34:TMDS-34] [ 601.687775] [drm:check_crtc_state] [CRTC:8] [ 601.687777] [drm:check_crtc_state] [CRTC:12] [ 601.687778] [drm:check_crtc_state] [CRTC:16] [ 601.687780] [drm:check_shared_dpll_state] WRPLL 1 [ 601.687781] [drm:check_shared_dpll_state] WRPLL 2 [ 850.718440] Console: switching to colour dummy device 80x25 [ 850.723985] [drm:intel_display_power_put] disabling display [ 850.723992] [drm:hsw_set_power_well] Requesting to disable the power well [ 850.726957] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0) [ 850.726962] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=1, fb_changed=0 [ 850.726965] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 850.726968] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 850.726971] [drm:connected_sink_compute_bpp] [CONNECTOR:19:eDP-1] checking for sink bpp constrains [ 850.726974] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 850.726976] [drm:intel_dp_compute_config] forcing lane count to max (2) on BDW [ 850.726977] [drm:intel_dp_compute_config] using min 06 link bw per VBT [ 850.726983] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 850.726984] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 850.726987] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 850.726989] [drm:intel_dump_pipe_config] [CRTC:8][modeset] config for pipe A [ 850.726990] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 850.726992] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 850.726994] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 850.726996] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 850.726998] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 850.726999] [drm:intel_dump_pipe_config] requested mode: [ 850.727002] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 850.727004] [drm:intel_dump_pipe_config] adjusted mode: [ 850.727006] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 850.727008] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 850.727010] [drm:intel_dump_pipe_config] port clock: 270000 [ 850.727011] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 850.727013] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 850.727015] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 850.727016] [drm:intel_dump_pipe_config] ips: 1 [ 850.727017] [drm:intel_dump_pipe_config] double wide: 0 [ 850.727021] [drm:intel_display_power_get] enabling always-on [ 850.727039] [drm:intel_edp_panel_on] Turn eDP power on [ 850.727042] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 850.727046] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000 [ 850.727049] [drm:wait_panel_status] Wait complete [ 850.727053] [drm:wait_panel_on] Wait for panel power on [ 850.727057] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003 [ 850.935182] [drm:wait_panel_status] Wait complete [ 850.935186] [drm:edp_panel_vdd_on] Turning eDP VDD on [ 850.935193] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 850.936261] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 850.936711] [drm:intel_dp_start_link_train] clock recovery OK [ 850.937457] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful [ 850.937693] [drm:intel_edp_backlight_on] [ 850.937695] [drm:intel_panel_enable_backlight] pipe A [ 850.937702] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 850.937707] [drm:intel_edp_psr_enable] PSR not supported by this panel [ 850.937713] [drm:ironlake_update_primary_plane] Writing base 00881000 00000000 0 0 7680 [ 850.973200] [drm:intel_update_fbc] disabled per chip default [ 850.973204] [drm:intel_connector_check_state] [CONNECTOR:19:eDP-1] [ 850.973208] [drm:check_encoder_state] [ENCODER:18:TMDS-18] [ 850.973210] [drm:check_encoder_state] [ENCODER:27:TMDS-27] [ 850.973211] [drm:check_encoder_state] [ENCODER:29:DP MST-29] [ 850.973213] [drm:check_encoder_state] [ENCODER:30:DP MST-30] [ 850.973214] [drm:check_encoder_state] [ENCODER:31:DP MST-31] [ 850.973215] [drm:check_encoder_state] [ENCODER:34:TMDS-34] [ 850.973217] [drm:check_crtc_state] [CRTC:8] [ 850.973225] [drm:check_crtc_state] [CRTC:12] [ 850.973227] [drm:check_crtc_state] [CRTC:16] [ 850.973228] [drm:check_shared_dpll_state] WRPLL 1 [ 850.973230] [drm:check_shared_dpll_state] WRPLL 2 [ 850.973233] [drm:intel_crtc_set_config] [CRTC:12] [NOFB] [ 850.973235] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0 [ 850.973237] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 850.973240] [drm:intel_crtc_set_config] [CRTC:16] [NOFB] [ 850.973241] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=0, fb_changed=0 [ 850.973243] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 850.975269] [drm:intel_display_power_get] enabling display [ 850.975271] [drm:hsw_set_power_well] Enabling power well [ 850.989377] drm_kms_helper: drm: unregistered panic notifier [ 850.995228] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 850.995233] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=1, fb_changed=0 [ 850.995235] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [NOCRTC] [ 850.995237] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch [ 850.995238] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch [ 850.995240] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch [ 850.995243] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 1 [ 851.005224] [drm:intel_edp_backlight_off] [ 851.206326] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 851.222485] [drm:intel_edp_panel_off] Turn eDP power off [ 851.222490] [drm:wait_panel_off] Wait for panel power off time [ 851.222494] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 851.277358] [drm:wait_panel_status] Wait complete [ 851.277366] [drm:intel_update_fbc] no output, disabling [ 851.277372] [drm:intel_display_power_put] disabling display [ 851.277374] [drm:hsw_set_power_well] Requesting to disable the power well [ 851.277375] [drm:intel_display_power_put] disabling always-on [ 851.277379] [drm:check_encoder_state] [ENCODER:18:TMDS-18] [ 851.277381] [drm:check_encoder_state] [ENCODER:27:TMDS-27] [ 851.277383] [drm:check_encoder_state] [ENCODER:29:DP MST-29] [ 851.277384] [drm:check_encoder_state] [ENCODER:30:DP MST-30] [ 851.277385] [drm:check_encoder_state] [ENCODER:31:DP MST-31] [ 851.277387] [drm:check_encoder_state] [ENCODER:34:TMDS-34] [ 851.277389] [drm:check_crtc_state] [CRTC:8] [ 851.277390] [drm:check_crtc_state] [CRTC:12] [ 851.277392] [drm:check_crtc_state] [CRTC:16] [ 851.277394] [drm:check_shared_dpll_state] WRPLL 1 [ 851.277395] [drm:check_shared_dpll_state] WRPLL 2 [ 851.277409] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe A [ 851.277411] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B [ 851.277412] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C [ 851.280384] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe A [ 851.280388] [drm:i915_get_vblank_timestamp] crtc 0 is disabled [ 851.280390] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe A [ 851.280392] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B [ 851.280393] [drm:i915_get_vblank_timestamp] crtc 1 is disabled [ 851.280395] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B [ 851.280396] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C [ 851.280398] [drm:i915_get_vblank_timestamp] crtc 2 is disabled [ 851.280399] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C [ 851.282404] [drm] Module unloaded [ 851.291557] Console: switching to mono frame buffer device 80x25 [ 851.291564] BUG: unable to handle kernel NULL pointer dereference at 00000000000003a0 [ 851.291569] IP: [] fbcon_cursor+0x32/0x14a [ 851.291571] PGD 27fc067 PUD 21d8067 PMD 0 [ 851.291572] Oops: 0000 [#1] SMP [ 851.291581] Modules linked in: dm_mod iTCO_wdt iTCO_vendor_support ppdev pcspkr snd_hda_codec_hdmi i2c_i801 snd_hda_controller snd_hda_codec snd_hwdep snd_pcm snd_timer lpc_ich mfd_core snd soundcore battery parport_pc parport ac acpi_cpufreq button video cfbfillrect cfbimgblt cfbcopyarea [last unloaded: drm] [ 851.291583] CPU: 0 PID: 4645 Comm: drv_module_relo Not tainted 3.17.0-rc2_drm-intel-nightly_4144c9_20140904+ #2116 [ 851.291585] task: ffff8800a3955000 ti: ffff8800a7480000 task.ti: ffff8800a7480000 [ 851.291587] RIP: 0010:[] [] fbcon_cursor+0x32/0x14a [ 851.291588] RSP: 0018:ffff8800a7483d98 EFLAGS: 00010292 [ 851.291589] RAX: ffff8800000861fe RBX: ffff88014a010000 RCX: 00000000000000d0 [ 851.291590] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff88014a010000 [ 851.291590] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffff83379b84 [ 851.291591] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000002 [ 851.291592] R13: 0000000000000000 R14: 00000000000000f0 R15: 000000000000003e [ 851.291593] FS: 00007fc40e262740(0000) GS:ffff88014ec00000(0000) knlGS:0000000000000000 [ 851.291594] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 851.291594] CR2: 00000000000003a0 CR3: 0000000002254000 CR4: 00000000003407f0 [ 851.291595] Stack: [ 851.291596] 000000000000003f ffffffff818297b0 0000000000000000 ffff88014a010000 [ 851.291598] 000000000000003f 0000000000000000 0000000000000000 00000000000000f0 [ 851.291599] 000000000000003e ffffffff813c04b0 ffff88014a010000 ffffffff813c125c [ 851.291599] Call Trace: [ 851.291603] [] ? hide_cursor+0x24/0x73 [ 851.291605] [] ? redraw_screen+0xdd/0x1dc [ 851.291606] [] ? do_bind_con_driver+0x264/0x2ca [ 851.291608] [] ? store_bind+0x116/0x207 [ 851.291611] [] ? kernfs_fop_write+0xca/0x110 [ 851.291613] [] ? vfs_write+0xb0/0x183 [ 851.291615] [] ? SyS_write+0x41/0x84 [ 851.291617] [] ? system_call_fastpath+0x16/0x1b [ 851.291631] Code: 54 41 89 f4 55 53 48 89 fb 48 83 ec 18 0f b7 87 78 01 00 00 48 0f be 80 80 4e 3a 83 48 8b 2c c5 a0 a3 c5 81 48 8b 87 e8 01 00 00 <83> bd a0 03 00 00 00 66 8b 00 4c 8b ad a8 03 00 00 66 89 44 24 [ 851.291634] RIP [] fbcon_cursor+0x32/0x14a [ 851.291634] RSP [ 851.291634] CR2: 00000000000003a0 [ 851.291636] ---[ end trace 7372781083a6c910 ]---