[ 43.363813] calling init_netconsole+0x0/0x250 [netconsole] @ 4180 [ 43.363833] netpoll: netconsole: local port 6665 [ 43.363846] netpoll: netconsole: local IPv4 address 0.0.0.0 [ 43.363862] netpoll: netconsole: interface 'eno1' [ 43.363875] netpoll: netconsole: remote port 6666 [ 43.363889] netpoll: netconsole: remote IPv4 address 10.239.47.62 [ 43.363905] netpoll: netconsole: remote ethernet address 34:17:eb:af:82:9f [ 43.363925] netpoll: netconsole: local IP 10.239.47.50 [ 43.363960] console [netcon0] enabled [ 43.363971] netconsole: network logging started [ 43.363986] initcall init_netconsole+0x0/0x250 [netconsole] returned 0 after 149 usecs [ 43.367012] console [netcon0] disabled [ 43.371711] calling init_netconsole+0x0/0x250 [netconsole] @ 4190 [ 43.371734] netpoll: netconsole: local port 6665 [ 43.371748] netpoll: netconsole: local IPv4 address 0.0.0.0 [ 43.371763] netpoll: netconsole: interface 'eno1' [ 43.371777] netpoll: netconsole: remote port 6666 [ 43.371790] netpoll: netconsole: remote IPv4 address 10.239.47.62 [ 43.371806] netpoll: netconsole: remote ethernet address 34:17:eb:af:82:9f [ 43.371825] netpoll: netconsole: local IP 10.239.47.50 [ 43.371853] console [netcon0] enabled [ 43.371864] netconsole: network logging started [ 43.371879] initcall init_netconsole+0x0/0x250 [netconsole] returned 0 after 141 usecs [ 62.647051] usb 3-3.4: USB disconnect, device number 5 [ 64.113534] usb 3-3.4: new low-speed USB device number 6 using xhci_hcd [ 64.209682] usb 3-3.4: New USB device found, idVendor=046d, idProduct=c05a [ 64.209705] usb 3-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 64.209726] usb 3-3.4: Product: USB Optical Mouse [ 64.209740] usb 3-3.4: Manufacturer: Logitech [ 64.209876] usb 3-3.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 64.212107] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4:1.0/0003:046D:C05A.0004/input/input10 [ 64.212215] hid-generic 0003:046D:C05A.0004: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-3.4/input0 [ 75.247621] PM: Syncing filesystems ... done. [ 75.248093] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 75.249312] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff] [ 75.249332] PM: Marking nosave pages: [mem 0x75d66000-0x75d6cfff] [ 75.249349] PM: Marking nosave pages: [mem 0x761b8000-0x76606fff] [ 75.249376] PM: Marking nosave pages: [mem 0x8c659000-0x8dffefff] [ 75.249453] PM: Marking nosave pages: [mem 0x8e000000-0xffffffff] [ 75.250139] PM: Basic memory bitmaps created [ 75.250292] PM: Preallocating image memory... done (allocated 119238 pages) [ 75.353341] PM: Allocated 476952 kbytes in 0.10 seconds (4769.52 MB/s) [ 75.353360] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 75.354491] Suspending console(s) (use no_console_suspend to debug) [ 75.641779] calling ata7+ @ 4227, parent: 0000:03:00.0 [ 75.641780] calling ata4+ @ 4231, parent: 0000:00:1f.2 [ 75.641782] call ata4+ returned 0 after 1 usecs [ 75.641782] call ata7+ returned 0 after 2 usecs [ 75.641783] calling ata8+ @ 4227, parent: 0000:03:00.0 [ 75.641784] calling host3+ @ 1157, parent: ata4 [ 75.641784] call host3+ returned 0 after 0 usecs [ 75.641785] call ata8+ returned 0 after 1 usecs [ 75.641786] calling host6+ @ 1157, parent: ata7 [ 75.641786] call host6+ returned 0 after 0 usecs [ 75.641790] calling host7+ @ 1157, parent: ata8 [ 75.641790] call host7+ returned 0 after 0 usecs [ 75.641793] calling LNXTHERM:01+ @ 4219, parent: LNXSYBUS:01 [ 75.641794] call LNXTHERM:01+ returned 0 after 0 usecs [ 75.641813] calling INT0800:00+ @ 4219, parent: 0000:00:1f.0 [ 75.641814] call INT0800:00+ returned 0 after 0 usecs [ 75.641814] calling PNP0103:00+ @ 4219, parent: 0000:00:1f.0 [ 75.641815] call PNP0103:00+ returned 0 after 0 usecs [ 75.641815] calling PNP0C04:00+ @ 4219, parent: 0000:00:1f.0 [ 75.641815] call PNP0C04:00+ returned 0 after 0 usecs [ 75.641816] calling PNP0C09:00+ @ 4219, parent: 0000:00:1f.0 [ 75.641816] call PNP0C09:00+ returned 0 after 0 usecs [ 75.641817] calling PNP0C14:00+ @ 4219, parent: pci0000:00 [ 75.641817] call PNP0C14:00+ returned 0 after 0 usecs [ 75.641818] calling PNP0C0C:00+ @ 4219, parent: platform [ 75.641818] call PNP0C0C:00+ returned 0 after 0 usecs [ 75.641818] calling PNP0C0B:00+ @ 4219, parent: platform [ 75.641819] call PNP0C0B:00+ returned 0 after 0 usecs [ 75.641819] calling PNP0C0B:01+ @ 4219, parent: platform [ 75.641820] call PNP0C0B:01+ returned 0 after 0 usecs [ 75.641820] calling PNP0C0B:02+ @ 4219, parent: platform [ 75.641820] call PNP0C0B:02+ returned 0 after 0 usecs [ 75.641821] calling PNP0C0B:03+ @ 4219, parent: platform [ 75.641821] call PNP0C0B:03+ returned 0 after 0 usecs [ 75.641821] calling PNP0C0B:04+ @ 4219, parent: platform [ 75.641822] call PNP0C0B:04+ returned 0 after 0 usecs [ 75.641822] calling PNP0A0A:00+ @ 4219, parent: platform [ 75.641822] call PNP0A0A:00+ returned 0 after 0 usecs [ 75.641823] calling PNP0C14:01+ @ 4219, parent: platform [ 75.641823] call PNP0C14:01+ returned 0 after 0 usecs [ 75.641824] calling LNXPWRBN:00+ @ 4219, parent: LNXSYSTM:00 [ 75.641824] call LNXPWRBN:00+ returned 0 after 0 usecs [ 75.641825] calling 00:00+ @ 4219, parent: pnp0 [ 75.641826] call 00:00+ returned 0 after 0 usecs [ 75.641826] calling 00:01+ @ 4219, parent: pnp0 [ 75.641827] call 00:01+ returned 0 after 0 usecs [ 75.641827] calling 00:02+ @ 4219, parent: pnp0 [ 75.641833] rtc_cmos 00:02: System wakeup disabled by ACPI [ 75.641858] call 00:02+ returned 0 after 30 usecs [ 75.641859] calling 00:03+ @ 4219, parent: pnp0 [ 75.641859] call 00:03+ returned 0 after 0 usecs [ 75.641860] calling 00:04+ @ 4219, parent: pnp0 [ 75.641860] call 00:04+ returned 0 after 0 usecs [ 75.641861] calling 00:05+ @ 4219, parent: pnp0 [ 75.641861] call 00:05+ returned 0 after 0 usecs [ 75.641861] calling 00:06+ @ 4219, parent: pnp0 [ 75.641862] call 00:06+ returned 0 after 0 usecs [ 75.641870] calling pcspkr+ @ 4219, parent: platform [ 75.641871] call pcspkr+ returned 0 after 0 usecs [ 75.641872] calling platform-framebuffer.0+ @ 4219, parent: platform [ 75.641872] call platform-framebuffer.0+ returned 0 after 0 usecs [ 75.641873] calling alarmtimer+ @ 4219, parent: platform [ 75.641874] call alarmtimer+ returned 0 after 0 usecs [ 75.641878] calling serial8250+ @ 4219, parent: platform [ 75.641879] call serial8250+ returned 0 after 0 usecs [ 75.642177] calling usb3+ @ 4235, parent: 0000:00:14.0 [ 75.642332] calling usb4+ @ 4253, parent: 0000:00:14.0 [ 75.642424] calling target1:0:0+ @ 4263, parent: host1 [ 75.642424] call target1:0:0+ returned 0 after 0 usecs [ 75.642426] calling 1:0:0:0+ @ 4263, parent: target1:0:0 [ 75.642427] call 1:0:0:0+ returned 0 after 0 usecs [ 75.642507] calling target7:0:0+ @ 4273, parent: host7 [ 75.642507] call target7:0:0+ returned 0 after 0 usecs [ 75.642508] calling 7:0:0:0+ @ 4273, parent: target7:0:0 [ 75.642509] call 7:0:0:0+ returned 0 after 0 usecs [ 75.642897] sd 7:0:0:0: [sda] Starting disk [ 75.642905] [drm:intel_opregion_setup] graphic opregion physical addr: 0x8cab1018 [ 75.642912] [drm:intel_opregion_setup] Public ACPI methods supported [ 75.642912] [drm:intel_opregion_setup] SWSCI supported [ 75.644092] call 0000:00:03.0+ returned 0 after 2503 usecs [ 75.645443] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 75.645444] call 0000:00:1a.0+ returned 0 after 3799 usecs [ 75.645447] calling usb1+ @ 1157, parent: 0000:00:1a.0 [ 75.645474] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 75.645475] call 0000:00:1d.0+ returned 0 after 3815 usecs [ 75.645477] calling usb2+ @ 40, parent: 0000:00:1d.0 [ 75.648131] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 [ 75.648132] [drm:intel_opregion_setup] ASLE supported [ 75.720216] [drm:intel_crt_reset] pch crt adpa set to 0xf40018 [ 75.720221] [drm:init_status_page] render ring hws offset: 0x7fff0000 [ 75.722262] [drm:init_status_page] bsd ring hws offset: 0x00226000 [ 75.722280] [drm:init_status_page] blitter ring hws offset: 0x00247000 [ 75.722295] [drm:init_status_page] video enhancement ring hws offset: 0x00268000 [ 75.722384] [drm:intel_modeset_readout_hw_state] [CRTC:8] hw state readout: disabled [ 75.722385] [drm:intel_modeset_readout_hw_state] [CRTC:12] hw state readout: disabled [ 75.722386] [drm:intel_modeset_readout_hw_state] [CRTC:16] hw state readout: disabled [ 75.722387] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: refcount 0, on 0 [ 75.722388] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: refcount 0, on 0 [ 75.722389] [drm:intel_modeset_readout_hw_state] [ENCODER:19:DAC-19] hw state readout: disabled, pipe A [ 75.722390] [drm:intel_modeset_readout_hw_state] [ENCODER:20:TMDS-20] hw state readout: disabled, pipe A [ 75.722391] [drm:intel_modeset_readout_hw_state] [ENCODER:25:TMDS-25] hw state readout: disabled, pipe A [ 75.722392] [drm:intel_modeset_readout_hw_state] [ENCODER:27:TMDS-27] hw state readout: disabled, pipe A [ 75.722393] [drm:intel_modeset_readout_hw_state] [ENCODER:29:DP MST-29] hw state readout: disabled, pipe A [ 75.722393] [drm:intel_modeset_readout_hw_state] [ENCODER:30:DP MST-30] hw state readout: disabled, pipe B [ 75.722394] [drm:intel_modeset_readout_hw_state] [ENCODER:31:DP MST-31] hw state readout: disabled, pipe C [ 75.722395] [drm:intel_modeset_readout_hw_state] [CONNECTOR:18:VGA-1] hw state readout: disabled [ 75.722396] [drm:intel_modeset_readout_hw_state] [CONNECTOR:21:HDMI-A-1] hw state readout: disabled [ 75.722397] [drm:intel_modeset_readout_hw_state] [CONNECTOR:26:HDMI-A-2] hw state readout: disabled [ 75.722398] [drm:intel_modeset_readout_hw_state] [CONNECTOR:28:DP-1] hw state readout: disabled [ 75.722398] [drm:intel_modeset_readout_hw_state] [CONNECTOR:32:HDMI-A-3] hw state readout: disabled [ 75.722400] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe A [ 75.722401] [drm:i915_get_vblank_timestamp] crtc 0 is disabled [ 75.722401] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe A [ 75.722403] [drm:intel_dump_pipe_config] [CRTC:8][setup_hw_state] config for pipe A [ 75.722403] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 75.722404] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 75.722404] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 75.722405] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 75.722406] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 75.722406] [drm:intel_dump_pipe_config] requested mode: [ 75.722408] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 75.722408] [drm:intel_dump_pipe_config] adjusted mode: [ 75.722409] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 75.722410] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 75.722410] [drm:intel_dump_pipe_config] port clock: 0 [ 75.722411] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 75.722412] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 75.722412] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 75.722413] [drm:intel_dump_pipe_config] ips: 0 [ 75.722413] [drm:intel_dump_pipe_config] double wide: 0 [ 75.722414] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B [ 75.722414] [drm:i915_get_vblank_timestamp] crtc 1 is disabled [ 75.722415] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B [ 75.722415] [drm:intel_dump_pipe_config] [CRTC:12][setup_hw_state] config for pipe B [ 75.722416] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 75.722416] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 75.722417] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 75.722418] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 75.722418] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 75.722419] [drm:intel_dump_pipe_config] requested mode: [ 75.722420] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 75.722420] [drm:intel_dump_pipe_config] adjusted mode: [ 75.722421] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 75.722422] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 75.722422] [drm:intel_dump_pipe_config] port clock: 0 [ 75.722422] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 75.722423] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 75.722423] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 75.722424] [drm:intel_dump_pipe_config] ips: 0 [ 75.722424] [drm:intel_dump_pipe_config] double wide: 0 [ 75.722425] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C [ 75.722425] [drm:i915_get_vblank_timestamp] crtc 2 is disabled [ 75.722426] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C [ 75.722426] [drm:intel_dump_pipe_config] [CRTC:16][setup_hw_state] config for pipe C [ 75.722427] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 75.722427] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 75.722428] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 75.722429] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 75.722429] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 75.722430] [drm:intel_dump_pipe_config] requested mode: [ 75.722431] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 75.722431] [drm:intel_dump_pipe_config] adjusted mode: [ 75.722432] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 75.722432] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 75.722433] [drm:intel_dump_pipe_config] port clock: 0 [ 75.722433] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 75.722434] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 75.722434] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 75.722434] [drm:intel_dump_pipe_config] ips: 0 [ 75.722435] [drm:intel_dump_pipe_config] double wide: 0 [ 75.722438] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 75.722440] [drm:connected_sink_compute_bpp] [CONNECTOR:18:VGA-1] checking for sink bpp constrains [ 75.722441] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 2 [ 75.722442] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 75.722442] [drm:intel_dump_pipe_config] [CRTC:8][modeset] config for pipe A [ 75.722442] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 75.722443] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 75.722444] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64 [ 75.722444] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 75.722445] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 75.722445] [drm:intel_dump_pipe_config] requested mode: [ 75.722446] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 75.722447] [drm:intel_dump_pipe_config] adjusted mode: [ 75.722448] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 75.722449] [drm:intel_dump_crtc_timings] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 [ 75.722449] [drm:intel_dump_pipe_config] port clock: 270000 [ 75.722449] [drm:intel_dump_pipe_config] pipe src size: 1280x1024 [ 75.722450] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 75.722450] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 75.722451] [drm:intel_dump_pipe_config] ips: 0 [ 75.722451] [drm:intel_dump_pipe_config] double wide: 0 [ 75.723349] [drm:hsw_fdi_link_train] FDI link training done on step 0 [ 75.725246] [drm:lpt_program_iclkip] iCLKIP clock: found settings for 108000KHz refresh rate: auxdiv=0, divsel=17, phasedir=0, phaseinc=0 [ 75.729245] [drm:ironlake_update_primary_plane] Writing base 0028A000 00000000 0 0 5120 [ 75.729248] [drm:intel_update_fbc] disabled per chip default [ 75.729250] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 75.729253] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 75.729256] [drm:intel_connector_check_state] [CONNECTOR:18:VGA-1] [ 75.729258] [drm:check_encoder_state] [ENCODER:19:DAC-19] [ 75.729259] [drm:check_encoder_state] [ENCODER:20:TMDS-20] [ 75.729260] [drm:check_encoder_state] [ENCODER:25:TMDS-25] [ 75.729261] [drm:check_encoder_state] [ENCODER:27:TMDS-27] [ 75.729261] [drm:check_encoder_state] [ENCODER:29:DP MST-29] [ 75.729262] [drm:check_encoder_state] [ENCODER:30:DP MST-30] [ 75.729263] [drm:check_encoder_state] [ENCODER:31:DP MST-31] [ 75.729263] [drm:check_crtc_state] [CRTC:8] [ 75.729270] [drm:check_crtc_state] [CRTC:12] [ 75.729271] [drm:check_crtc_state] [CRTC:16] [ 75.729272] [drm:check_shared_dpll_state] WRPLL 1 [ 75.729273] [drm:check_shared_dpll_state] WRPLL 2 [ 75.729278] [drm:intel_crt_detect] [CONNECTOR:18:VGA-1] force=0 [ 75.729280] [drm:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x83f40018 [ 75.734948] e1000e 0000:00:19.0: irq 35 for MSI/MSI-X [ 75.739259] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x83f40018, result 1 [ 75.739259] [drm:intel_crt_detect] CRT detected via hotplug [ 75.739261] [drm:drm_helper_hpd_irq_event] [CONNECTOR:18:VGA-1] status updated from unknown to connected [ 75.739274] [drm:drm_fb_helper_hotplug_event] [ 75.739275] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:18:VGA-1] [ 75.739276] [drm:intel_crt_detect] [CONNECTOR:18:VGA-1] force=1 [ 75.739278] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x83f40018, result 1 [ 75.739278] [drm:intel_crt_detect] CRT detected via hotplug [ 75.752063] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 75.752067] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:18:VGA-1] probed modes : [ 75.752069] [drm:drm_mode_debug_printmodeline] Modeline 35:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 75.752070] [drm:drm_mode_debug_printmodeline] Modeline 41:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 75.752071] [drm:drm_mode_debug_printmodeline] Modeline 36:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 75.752072] [drm:drm_mode_debug_printmodeline] Modeline 42:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 75.752073] [drm:drm_mode_debug_printmodeline] Modeline 43:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 75.752074] [drm:drm_mode_debug_printmodeline] Modeline 44:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 75.752075] [drm:drm_mode_debug_printmodeline] Modeline 37:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 75.752076] [drm:drm_mode_debug_printmodeline] Modeline 38:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 75.752077] [drm:drm_mode_debug_printmodeline] Modeline 39:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 75.752078] [drm:drm_mode_debug_printmodeline] Modeline 40:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 75.752079] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-1] [ 75.752080] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-1] [ 75.752235] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 75.752236] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 75.752236] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-1] disconnected [ 75.752237] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-2] [ 75.752237] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2] [ 75.752385] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 75.752386] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 75.752387] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-2] disconnected [ 75.752387] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] [ 75.752388] [drm:intel_dp_detect] [CONNECTOR:28:DP-1] [ 75.752389] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] disconnected [ 75.752390] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-3] [ 75.752390] [drm:intel_hdmi_detect] [CONNECTOR:32:HDMI-A-3] [ 75.752537] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [ 75.752538] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd [ 75.752539] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-3] disconnected [ 75.752540] [drm:drm_setup_crtcs] [ 75.752540] [drm:drm_enable_connectors] connector 18 enabled? yes [ 75.752541] [drm:drm_enable_connectors] connector 21 enabled? no [ 75.752541] [drm:drm_enable_connectors] connector 26 enabled? no [ 75.752541] [drm:drm_enable_connectors] connector 28 enabled? no [ 75.752542] [drm:drm_enable_connectors] connector 32 enabled? no [ 75.752543] [drm:intel_fb_initial_config] looking for cmdline mode on connector VGA-1 [ 75.752543] [drm:intel_fb_initial_config] looking for preferred mode on connector VGA-1 [ 75.752544] [drm:intel_fb_initial_config] connector VGA-1 on pipe A [CRTC:8]: 1280x1024 [ 75.752545] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 75.752545] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 75.752545] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 75.752546] [drm:intel_fb_initial_config] connector HDMI-A-3 not enabled, skipping [ 75.752546] [drm:drm_setup_crtcs] desired mode 1280x1024 set on crtc 8 [ 75.752549] [drm:intel_crtc_set_config] [CRTC:8] [FB:46] #connectors=1 (x y) (0 0) [ 75.752550] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 75.752551] [drm:intel_modeset_stage_output_state] [CONNECTOR:18:VGA-1] to [CRTC:8] [ 75.752552] [drm:intel_crtc_set_config] [CRTC:12] [NOFB] [ 75.752553] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0 [ 75.752554] [drm:intel_modeset_stage_output_state] [CONNECTOR:18:VGA-1] to [CRTC:8] [ 75.752554] [drm:intel_crtc_set_config] [CRTC:16] [NOFB] [ 75.752555] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=0, fb_changed=0 [ 75.752555] [drm:intel_modeset_stage_output_state] [CONNECTOR:18:VGA-1] to [CRTC:8] [ 75.753060] [drm:intel_crtc_set_config] [CRTC:8] [FB:46] #connectors=1 (x y) (0 0) [ 75.753061] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 75.753062] [drm:intel_modeset_stage_output_state] [CONNECTOR:18:VGA-1] to [CRTC:8] [ 75.756247] call 0000:00:02.0+ returned 0 after 111943 usecs [ 75.756366] call 0000:00:19.0+ returned 0 after 112025 usecs [ 75.756372] calling i8042+ @ 4219, parent: platform [ 75.756754] call i8042+ returned 0 after 372 usecs [ 75.756754] calling serio0+ @ 4219, parent: i8042 [ 75.756756] call serio0+ returned 0 after 1 usecs [ 75.756821] calling serio1+ @ 4219, parent: i8042 [ 75.756822] call serio1+ returned 0 after 0 usecs [ 75.756824] calling rtc0+ @ 4219, parent: 00:02 [ 75.756824] call rtc0+ returned 0 after 0 usecs [ 75.756828] calling input3+ @ 4219, parent: PNP0C0C:00 [ 75.756829] call input3+ returned 0 after 0 usecs [ 75.756830] calling input4+ @ 4219, parent: LNXPWRBN:00 [ 75.756830] call input4+ returned 0 after 0 usecs [ 75.756832] calling i2c-0+ @ 4219, parent: 0000:00:02.0 [ 75.756832] call i2c-0+ returned 0 after 0 usecs [ 75.756833] calling i2c-1+ @ 4219, parent: 0000:00:02.0 [ 75.756833] call i2c-1+ returned 0 after 0 usecs [ 75.756834] calling i2c-2+ @ 4219, parent: 0000:00:02.0 [ 75.756834] call i2c-2+ returned 0 after 0 usecs [ 75.756835] calling i2c-3+ @ 4219, parent: 0000:00:02.0 [ 75.756835] call i2c-3+ returned 0 after 0 usecs [ 75.756836] calling i2c-4+ @ 4219, parent: 0000:00:02.0 [ 75.756836] call i2c-4+ returned 0 after 0 usecs [ 75.756837] calling i2c-5+ @ 4219, parent: 0000:00:02.0 [ 75.756837] call i2c-5+ returned 0 after 0 usecs [ 75.756838] calling i2c-6+ @ 4219, parent: 0000:00:02.0 [ 75.756838] call i2c-6+ returned 0 after 0 usecs [ 75.756839] calling acpi_video0+ @ 4219, parent: 0000:00:02.0 [ 75.756840] call acpi_video0+ returned 0 after 0 usecs [ 75.756840] calling input5+ @ 4219, parent: LNXVIDEO:00 [ 75.756841] call input5+ returned 0 after 0 usecs [ 75.756843] calling iTCO_wdt+ @ 4219, parent: 0000:00:1f.0 [ 75.756843] call iTCO_wdt+ returned 0 after 0 usecs [ 75.756844] calling input6+ @ 4219, parent: pcspkr [ 75.756852] call input6+ returned 0 after 7 usecs [ 75.799381] call 0000:00:1b.0+ returned 0 after 153990 usecs [ 75.844371] call usb4+ returned 0 after 197127 usecs [ 75.844392] calling 4-3+ @ 4302, parent: usb4 [ 75.847340] call usb1+ returned 0 after 196986 usecs [ 75.847344] calling 1-1+ @ 4263, parent: usb1 [ 75.847350] call usb2+ returned 0 after 196964 usecs [ 75.847357] calling 2-1+ @ 4273, parent: usb2 [ 75.855360] call usb3+ returned 0 after 208001 usecs [ 75.855384] calling 3-3+ @ 4285, parent: usb3 [ 75.855386] calling 3-4+ @ 4293, parent: usb3 [ 75.946454] ata7: SATA link down (SStatus 0 SControl 300) [ 75.946456] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 75.946570] usb 4-3: reset SuperSpeed USB device number 2 using xhci_hcd [ 75.949452] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 75.949457] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 75.950305] ata2.00: configured for UDMA/100 [ 75.958535] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880255c656c0 [ 76.008559] usb 3-3: reset high-speed USB device number 2 using xhci_hcd [ 76.080011] call 4-3+ returned 0 after 229891 usecs [ 76.102577] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 76.103015] ata8.00: configured for UDMA/133 [ 76.166358] call 1-1+ returned 0 after 311261 usecs [ 76.166586] call 2-1+ returned 0 after 311470 usecs [ 76.173691] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802566a71e0 [ 76.325794] usb 3-4: reset full-speed USB device number 3 using xhci_hcd [ 76.376810] call 3-3+ returned 0 after 508753 usecs [ 76.376814] calling 3-3.4+ @ 4316, parent: 3-3 [ 76.376815] calling 3-3.3+ @ 4310, parent: 3-3 [ 76.490411] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800028b9400 [ 76.490412] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800028b9490 [ 76.490413] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800028b9448 [ 76.490414] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880250d02d08 [ 76.490414] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880250d02cc0 [ 76.490881] call 3-4+ returned 0 after 620051 usecs [ 76.761247] usb 3-3.4: reset low-speed USB device number 6 using xhci_hcd [ 76.785193] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 76.789171] [drm:gen6_enable_rps] Overclocking supported. Max: 1250MHz, Overclock max: 1250MHz [ 77.045110] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880002c5dc60 [ 77.045114] usb 3-3.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 77.047537] call 3-3.4+ returned 0 after 654422 usecs [ 77.314792] usb 3-3.3: reset low-speed USB device number 4 using xhci_hcd [ 77.599555] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802558ad180 [ 77.599556] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802558ad5a0 [ 77.599559] usb 3-3.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 77.599561] usb 3-3.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 77.606959] call 3-3.3+ returned 0 after 1200249 usecs [ 77.606993] calling input7+ @ 4219, parent: 0003:0461:0010.0001 [ 77.607011] call input7+ returned 0 after 16 usecs [ 77.607016] calling input8+ @ 4219, parent: 0003:0461:0010.0002 [ 77.607017] call input8+ returned 0 after 0 usecs [ 77.607019] calling input10+ @ 4219, parent: 0003:046D:C05A.0004 [ 77.607020] call input10+ returned 0 after 0 usecs [ 77.607026] PM: restore of devices complete after 1963.802 msecs [ 78.101838] PM: Image restored successfully. [ 78.102529] PM: Basic memory bitmaps freed [ 78.103200] Restarting tasks ... done. [ 78.104561] video LNXVIDEO:00: Restoring backlight state [ 79.884476] e1000e: eno1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 79.885167] e1000e 0000:00:19.0 eno1: 10/100 speed: disabling TSO [ 88.120448] PM: Syncing filesystems ... done. [ 88.137716] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 88.139598] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff] [ 88.140302] PM: Marking nosave pages: [mem 0x75d66000-0x75d6cfff] [ 88.140998] PM: Marking nosave pages: [mem 0x761b8000-0x76606fff] [ 88.141698] PM: Marking nosave pages: [mem 0x8c659000-0x8dffefff] [ 88.142441] PM: Marking nosave pages: [mem 0x8e000000-0xffffffff] [ 88.143796] PM: Basic memory bitmaps created [ 88.144618] PM: Preallocating image memory... done (allocated 118903 pages) [ 88.247571] PM: Allocated 475612 kbytes in 0.10 seconds (4756.12 MB/s) [ 88.248263] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 88.250163] Suspending console(s) (use no_console_suspend to debug) [ 88.274776] calling 0000:03:00.0+ @ 4319, parent: 0000:00:1c.1 [ 88.274777] call 0000:03:00.0+ returned 0 after 0 usecs [ 88.274778] calling 0000:00:1f.3+ @ 4319, parent: pci0000:00 [ 88.274780] calling 0000:00:1f.2+ @ 4313, parent: pci0000:00 [ 88.274781] call 0000:00:1f.2+ returned 0 after 0 usecs [ 88.274783] calling 0000:00:1d.0+ @ 4313, parent: pci0000:00 [ 88.274784] calling 0000:00:1f.0+ @ 4312, parent: pci0000:00 [ 88.274916] call 0000:00:1f.3+ returned 0 after 133 usecs [ 88.274918] calling 0000:00:1c.4+ @ 4319, parent: pci0000:00 [ 88.274951] call 0000:00:1f.0+ returned 0 after 161 usecs [ 88.274979] call 0000:00:1d.0+ returned 0 after 190 usecs [ 88.274981] calling 0000:00:1c.1+ @ 4313, parent: pci0000:00 [ 88.275067] call 0000:08:00.0+ returned 0 after 294 usecs [ 88.275069] calling 0000:00:1c.0+ @ 4314, parent: pci0000:00 [ 88.275072] calling 0000:05:03.0+ @ 4295, parent: 0000:04:00.0 [ 88.275127] call 0000:05:02.0+ returned 0 after 350 usecs [ 88.275129] calling 0000:00:1b.0+ @ 1138, parent: pci0000:00 [ 88.275130] call 0000:00:1b.0+ returned 0 after 0 usecs [ 88.275131] call 0000:05:01.0+ returned 0 after 352 usecs [ 88.275131] calling 0000:00:1a.0+ @ 1138, parent: pci0000:00 [ 88.275133] calling 0000:00:19.0+ @ 4317, parent: pci0000:00 [ 88.275150] call 0000:00:1c.4+ returned 0 after 225 usecs [ 88.275151] calling 0000:00:16.0+ @ 4319, parent: pci0000:00 [ 88.275195] call 0000:00:1c.1+ returned 0 after 209 usecs [ 88.275197] calling 0000:00:14.0+ @ 4313, parent: pci0000:00 [ 88.275264] call 0000:00:1a.0+ returned 0 after 128 usecs [ 88.275266] calling 0000:00:03.0+ @ 1138, parent: pci0000:00 [ 88.275266] call 0000:00:03.0+ returned 0 after 0 usecs [ 88.275268] call 0000:00:1c.0+ returned 0 after 193 usecs [ 88.275269] calling 0000:00:02.0+ @ 1138, parent: pci0000:00 [ 88.275269] call 0000:00:19.0+ returned 0 after 131 usecs [ 88.275270] calling 0000:00:01.0+ @ 4314, parent: pci0000:00 [ 88.275270] call 0000:00:02.0+ returned 0 after 0 usecs [ 88.275271] calling 0000:00:00.0+ @ 4317, parent: pci0000:00 [ 88.275273] call 0000:00:16.0+ returned 0 after 117 usecs [ 88.275296] call 0000:00:14.0+ returned 0 after 95 usecs [ 88.275315] call 0000:05:03.0+ returned 0 after 236 usecs [ 88.275317] call 0000:00:00.0+ returned 0 after 45 usecs [ 88.275318] calling 0000:04:00.0+ @ 4315, parent: 0000:00:1c.3 [ 88.275357] call 0000:00:01.0+ returned 0 after 84 usecs [ 88.275398] call 0000:04:00.0+ returned 0 after 77 usecs [ 88.275400] calling 0000:00:1c.3+ @ 4312, parent: pci0000:00 [ 88.275424] call 0000:00:1c.3+ returned 0 after 22 usecs [ 88.275427] PM: noirq freeze of devices complete after 0.835 msecs [ 88.275689] ACPI: Preparing to enter system sleep state S4 [ 88.275975] PM: Saving platform NVS memory [ 88.277972] Disabling non-boot CPUs ... [ 88.279142] smpboot: CPU 1 is now offline [ 88.280546] smpboot: CPU 2 is now offline [ 88.281948] smpboot: CPU 3 is now offline [ 88.283359] smpboot: CPU 4 is now offline [ 88.283875] Broke affinity for irq 16 [ 88.283883] Broke affinity for irq 29 [ 88.284893] smpboot: CPU 5 is now offline [ 88.286104] smpboot: CPU 6 is now offline [ 88.286328] Broke affinity for irq 30 [ 88.287347] smpboot: CPU 7 is now offline [ 88.287489] PM: Calling mce_syscore_suspend+0x0/0x2 [ 88.287493] PM: Calling acpi_processor_suspend+0x0/0x14 [ 88.287497] PM: Calling timekeeping_suspend+0x0/0x155 [ 88.287520] PM: Calling save_ioapic_entries+0x0/0x5a [ 88.287584] PM: Calling i8259A_suspend+0x0/0x1e [ 88.287590] PM: Calling fw_suspend+0x0/0xd [ 88.287592] PM: Calling lapic_suspend+0x0/0x168 [ 88.287596] PM: Creating hibernation image: [ 88.374059] PM: Need to copy 116702 pages [ 88.374060] PM: Normal pages needed: 116702 + 1024, available pages: 1898256 [ 88.288284] PM: Restoring platform NVS memory [ 88.288793] PM: Calling lapic_resume+0x0/0x209 [ 88.288816] PM: Calling irqrouter_resume+0x0/0x35 [ 88.288818] PM: Calling i8259A_resume+0x0/0x24 [ 88.288952] PM: Calling i8237A_resume+0x0/0x80 [ 88.289012] PM: Calling ioapic_resume+0x0/0x6f [ 88.289034] PM: Calling irq_pm_syscore_resume+0x0/0xa [ 88.289040] PM: Calling timekeeping_resume+0x0/0x16b [ 88.289070] PM: Calling acpi_processor_resume+0x0/0x30 [ 88.289072] PM: Calling mce_syscore_resume+0x0/0x1a [ 88.289080] CPU0: Thermal LVT vector (0xfa) already installed [ 88.289087] Enabling non-boot CPUs ... [ 88.289109] x86: Booting SMP configuration: [ 88.289110] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 88.300879] CPU1: Thermal LVT vector (0xfa) already installed [ 88.303186] CPU1 is up [ 88.303196] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 88.315078] CPU2: Thermal LVT vector (0xfa) already installed [ 88.317382] CPU2 is up [ 88.317391] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 88.329284] CPU3: Thermal LVT vector (0xfa) already installed [ 88.331567] CPU3 is up [ 88.331577] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 88.343452] CPU4: Thermal LVT vector (0xfa) already installed [ 88.345781] CPU4 is up [ 88.345791] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 88.357664] CPU5: Thermal LVT vector (0xfa) already installed [ 88.359988] CPU5 is up [ 88.359997] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 88.371877] CPU6: Thermal LVT vector (0xfa) already installed [ 88.374174] CPU6 is up [ 88.374183] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 88.386072] CPU7: Thermal LVT vector (0xfa) already installed [ 88.388375] CPU7 is up [ 88.394427] ACPI: Waking up from system sleep state S4 [ 88.445368] calling 0000:00:00.0+ @ 4312, parent: pci0000:00 [ 88.445377] call 0000:00:00.0+ returned 0 after 7 usecs [ 88.445377] calling 0000:00:01.0+ @ 4312, parent: pci0000:00 [ 88.445382] calling 0000:00:02.0+ @ 4315, parent: pci0000:00 [ 88.445386] calling 0000:00:03.0+ @ 4314, parent: pci0000:00 [ 88.445388] calling 0000:00:14.0+ @ 4317, parent: pci0000:00 [ 88.445392] calling 0000:00:16.0+ @ 4295, parent: pci0000:00 [ 88.445394] calling 0000:00:19.0+ @ 4313, parent: pci0000:00 [ 88.445465] call 0000:00:02.0+ returned 0 after 79 usecs [ 88.445466] calling 0000:00:1a.0+ @ 4315, parent: pci0000:00 [ 88.445470] call 0000:00:16.0+ returned 0 after 75 usecs [ 88.445472] calling 0000:00:1b.0+ @ 4295, parent: pci0000:00 [ 88.445481] call 0000:00:19.0+ returned 0 after 83 usecs [ 88.445482] calling 0000:00:1c.0+ @ 4313, parent: pci0000:00 [ 88.445491] call 0000:00:01.0+ returned 0 after 109 usecs [ 88.445492] calling 0000:00:1c.1+ @ 4312, parent: pci0000:00 [ 88.445493] call 0000:00:14.0+ returned 0 after 101 usecs [ 88.445494] calling 0000:00:1c.3+ @ 4317, parent: pci0000:00 [ 88.445554] call 0000:00:1a.0+ returned 0 after 85 usecs [ 88.445555] calling 0000:00:1c.4+ @ 4315, parent: pci0000:00 [ 88.445598] call 0000:00:1c.0+ returned 0 after 112 usecs [ 88.445599] calling 0000:00:1d.0+ @ 4313, parent: pci0000:00 [ 88.445611] call 0000:00:1c.1+ returned 0 after 115 usecs [ 88.445612] calling 0000:00:1f.0+ @ 4312, parent: pci0000:00 [ 88.445614] call 0000:00:1c.3+ returned 0 after 116 usecs [ 88.445617] calling 0000:00:1f.2+ @ 4317, parent: pci0000:00 [ 88.445685] call 0000:00:1f.0+ returned 0 after 70 usecs [ 88.445685] call 0000:00:1c.4+ returned 0 after 126 usecs [ 88.445686] calling 0000:00:1f.3+ @ 4312, parent: pci0000:00 [ 88.445687] calling 0000:03:00.0+ @ 4315, parent: 0000:00:1c.1 [ 88.445697] call 0000:00:1d.0+ returned 0 after 95 usecs [ 88.445698] calling 0000:04:00.0+ @ 4313, parent: 0000:00:1c.3 [ 88.445754] call 0000:00:1f.3+ returned 0 after 66 usecs [ 88.445761] call 0000:00:1f.2+ returned 0 after 140 usecs [ 88.445853] call 0000:03:00.0+ returned 0 after 162 usecs [ 88.445881] call 0000:04:00.0+ returned 0 after 178 usecs [ 88.445905] calling 0000:05:02.0+ @ 4317, parent: 0000:04:00.0 [ 88.445906] calling 0000:05:01.0+ @ 4312, parent: 0000:04:00.0 [ 88.445908] calling 0000:05:03.0+ @ 4315, parent: 0000:04:00.0 [ 88.446215] call 0000:00:03.0+ returned 0 after 806 usecs [ 88.446256] call 0000:05:02.0+ returned 0 after 342 usecs [ 88.446259] call 0000:05:01.0+ returned 0 after 343 usecs [ 88.446260] call 0000:05:03.0+ returned 0 after 343 usecs [ 88.446263] call 0000:00:1b.0+ returned 0 after 770 usecs [ 88.446264] calling 0000:08:00.0+ @ 4313, parent: 0000:05:03.0 [ 88.446366] call 0000:08:00.0+ returned 0 after 98 usecs [ 88.446383] PM: noirq restore of devices complete after 1.028 msecs [ 88.446461] calling 0000:00:02.0+ @ 4313, parent: pci0000:00 [ 88.446465] [drm:hsw_disable_pc8] Disabling package C8+ [ 88.518169] [drm:intel_display_power_get] enabling always-on [ 88.518170] [drm:intel_display_power_get] enabling display [ 88.518171] [drm:hsw_set_power_well] Enabling power well [ 88.520086] call 0000:00:02.0+ returned 0 after 71834 usecs [ 88.520157] PM: early restore of devices complete after 73.652 msecs [ 88.539392] calling 0000:00:00.0+ @ 4313, parent: pci0000:00 [ 88.539394] call 0000:00:00.0+ returned 0 after 0 usecs [ 88.539395] calling 0000:00:01.0+ @ 4313, parent: pci0000:00 [ 88.539396] call 0000:00:01.0+ returned 0 after 0 usecs [ 88.539397] calling 0000:00:02.0+ @ 4313, parent: pci0000:00 [ 88.539407] calling 0000:00:03.0+ @ 4311, parent: pci0000:00 [ 88.539411] calling 0000:00:14.0+ @ 4316, parent: pci0000:00 [ 88.539415] calling 0000:00:16.0+ @ 4315, parent: pci0000:00 [ 88.539416] call 0000:00:16.0+ returned 0 after 0 usecs [ 88.539419] calling 0000:00:19.0+ @ 4297, parent: pci0000:00 [ 88.539420] calling 0000:00:1a.0+ @ 4315, parent: pci0000:00 [ 88.539430] calling PNP0C0C:00+ @ 4332, parent: LNXSYBUS:00 [ 88.539431] call PNP0C0C:00+ returned 0 after 0 usecs [ 88.539434] usb usb3: root hub lost power or was reset [ 88.539434] calling PNP0C0B:00+ @ 4332, parent: LNXSYBUS:01 [ 88.539435] usb usb4: root hub lost power or was reset [ 88.539436] calling 0000:00:1b.0+ @ 4295, parent: pci0000:00 [ 88.539439] usb usb1: root hub lost power or was reset [ 88.539480] snd_hda_intel 0000:00:03.0: irq 31 for MSI/MSI-X [ 88.539504] calling 0000:00:1c.0+ @ 4310, parent: pci0000:00 [ 88.539505] call 0000:00:1c.0+ returned 0 after 0 usecs [ 88.539506] calling 0000:00:1c.1+ @ 4310, parent: pci0000:00 [ 88.539507] call 0000:00:1c.1+ returned 0 after 0 usecs [ 88.539508] calling 0000:00:1c.3+ @ 4310, parent: pci0000:00 [ 88.539509] call 0000:00:1c.3+ returned 0 after 0 usecs [ 88.539509] calling 0000:00:1c.4+ @ 4310, parent: pci0000:00 [ 88.539510] call 0000:00:1c.4+ returned 0 after 0 usecs [ 88.539511] calling 0000:00:1d.0+ @ 4310, parent: pci0000:00 [ 88.539519] call PNP0C0B:00+ returned 0 after 80 usecs [ 88.539520] calling PNP0C0B:01+ @ 4332, parent: LNXSYBUS:01 [ 88.539523] usb usb2: root hub lost power or was reset [ 88.539528] call PNP0C0B:01+ returned 0 after 8 usecs [ 88.539529] calling PNP0C0B:02+ @ 4332, parent: LNXSYBUS:01 [ 88.539537] call PNP0C0B:02+ returned 0 after 5 usecs [ 88.539538] calling PNP0C0B:03+ @ 4332, parent: LNXSYBUS:01 [ 88.539543] call PNP0C0B:03+ returned 0 after 4 usecs [ 88.539544] calling PNP0C0B:04+ @ 4332, parent: LNXSYBUS:01 [ 88.539550] call PNP0C0B:04+ returned 0 after 5 usecs [ 88.539551] snd_hda_intel 0000:00:1b.0: irq 32 for MSI/MSI-X [ 88.539551] calling LNXTHERM:00+ @ 4332, parent: LNXSYBUS:01 [ 88.539573] call LNXTHERM:00+ returned 0 after 20 usecs [ 88.539578] xhci_hcd 0000:00:14.0: irq 34 for MSI/MSI-X [ 88.539621] calling LNXTHERM:01+ @ 4332, parent: LNXSYBUS:01 [ 88.539622] call LNXTHERM:01+ returned 0 after 0 usecs [ 88.539643] call 0000:00:14.0+ returned 0 after 225 usecs [ 88.539644] calling 0000:00:1f.0+ @ 4316, parent: pci0000:00 [ 88.539645] call 0000:00:1f.0+ returned 0 after 0 usecs [ 88.539646] calling 0000:00:1f.2+ @ 4316, parent: pci0000:00 [ 88.539654] call 0000:00:1f.2+ returned 0 after 6 usecs [ 88.539654] calling 0000:00:1f.3+ @ 4316, parent: pci0000:00 [ 88.539692] call 0000:00:1f.3+ returned 0 after 36 usecs [ 88.539693] calling 0000:03:00.0+ @ 4316, parent: 0000:00:1c.1 [ 88.539700] call 0000:03:00.0+ returned 0 after 6 usecs [ 88.539701] calling 0000:04:00.0+ @ 4316, parent: 0000:00:1c.3 [ 88.539702] call 0000:04:00.0+ returned 0 after 0 usecs [ 88.539704] calling 0000:05:01.0+ @ 4316, parent: 0000:04:00.0 [ 88.539704] call 0000:05:01.0+ returned 0 after 0 usecs [ 88.539705] calling 0000:05:02.0+ @ 4316, parent: 0000:04:00.0 [ 88.539706] call 0000:05:02.0+ returned 0 after 0 usecs [ 88.539708] calling 0000:05:03.0+ @ 4316, parent: 0000:04:00.0 [ 88.539709] call 0000:05:03.0+ returned 0 after 0 usecs [ 88.539711] calling 0000:08:00.0+ @ 4316, parent: 0000:05:03.0 [ 88.539712] call 0000:08:00.0+ returned 0 after 0 usecs [ 88.539712] calling INT0800:00+ @ 4332, parent: 0000:00:1f.0 [ 88.539713] call INT0800:00+ returned 0 after 0 usecs [ 88.539714] calling PNP0103:00+ @ 4332, parent: 0000:00:1f.0 [ 88.539714] call PNP0103:00+ returned 0 after 0 usecs [ 88.539715] calling PNP0C04:00+ @ 4332, parent: 0000:00:1f.0 [ 88.539716] calling ata1+ @ 4316, parent: 0000:00:1f.2 [ 88.539716] call PNP0C04:00+ returned 0 after 0 usecs [ 88.539717] calling PNP0C09:00+ @ 4332, parent: 0000:00:1f.0 [ 88.539717] call PNP0C09:00+ returned 0 after 0 usecs [ 88.539718] calling PNP0C14:00+ @ 4332, parent: pci0000:00 [ 88.539718] call PNP0C14:00+ returned 0 after 0 usecs [ 88.539719] calling PNP0C0C:00+ @ 4332, parent: platform [ 88.539720] call ata1+ returned 0 after 3 usecs [ 88.539720] call PNP0C0C:00+ returned 0 after 0 usecs [ 88.539721] calling ata2+ @ 4316, parent: 0000:00:1f.2 [ 88.539721] calling PNP0C0B:00+ @ 4332, parent: platform [ 88.539721] call PNP0C0B:00+ returned 0 after 0 usecs [ 88.539722] calling PNP0C0B:01+ @ 4332, parent: platform [ 88.539723] call PNP0C0B:01+ returned 0 after 0 usecs [ 88.539723] call ata2+ returned 0 after 2 usecs [ 88.539724] calling PNP0C0B:02+ @ 4332, parent: platform [ 88.539724] call PNP0C0B:02+ returned 0 after 0 usecs [ 88.539725] calling PNP0C0B:03+ @ 4332, parent: platform [ 88.539725] call PNP0C0B:03+ returned 0 after 0 usecs [ 88.539726] calling PNP0C0B:04+ @ 4332, parent: platform [ 88.539726] call PNP0C0B:04+ returned 0 after 0 usecs [ 88.539727] calling PNP0A0A:00+ @ 4332, parent: platform [ 88.539727] call PNP0A0A:00+ returned 0 after 0 usecs [ 88.539728] calling PNP0C14:01+ @ 4332, parent: platform [ 88.539728] call PNP0C14:01+ returned 0 after 0 usecs [ 88.539729] calling LNXPWRBN:00+ @ 4332, parent: LNXSYSTM:00 [ 88.539729] call LNXPWRBN:00+ returned 0 after 0 usecs [ 88.539731] calling 00:00+ @ 4332, parent: pnp0 [ 88.539731] call 00:00+ returned 0 after 0 usecs [ 88.539732] calling 00:01+ @ 4332, parent: pnp0 [ 88.539733] call 00:01+ returned 0 after 0 usecs [ 88.539733] calling 00:02+ @ 4332, parent: pnp0 [ 88.539735] rtc_cmos 00:02: System wakeup disabled by ACPI [ 88.539749] calling ata3+ @ 4316, parent: 0000:00:1f.2 [ 88.539751] call ata3+ returned 0 after 1 usecs [ 88.539756] calling ata4+ @ 4316, parent: 0000:00:1f.2 [ 88.539758] call ata4+ returned 0 after 1 usecs [ 88.539759] calling ata5+ @ 4316, parent: 0000:00:1f.2 [ 88.539762] call ata5+ returned 0 after 2 usecs [ 88.539767] calling ata6+ @ 4316, parent: 0000:00:1f.2 [ 88.539769] call ata6+ returned 0 after 1 usecs [ 88.539770] calling host0+ @ 4316, parent: ata1 [ 88.539771] call host0+ returned 0 after 0 usecs [ 88.539772] calling host1+ @ 4316, parent: ata2 [ 88.539772] call host1+ returned 0 after 0 usecs [ 88.539773] calling host2+ @ 4316, parent: ata3 [ 88.539773] call host2+ returned 0 after 0 usecs [ 88.539774] calling host3+ @ 4316, parent: ata4 [ 88.539775] call host3+ returned 0 after 0 usecs [ 88.539776] calling host4+ @ 4316, parent: ata5 [ 88.539776] call host4+ returned 0 after 0 usecs [ 88.539777] calling host5+ @ 4316, parent: ata6 [ 88.539777] call host5+ returned 0 after 0 usecs [ 88.539778] calling ata7+ @ 4316, parent: 0000:03:00.0 [ 88.539783] call ata7+ returned 0 after 3 usecs [ 88.539783] calling ata8+ @ 4316, parent: 0000:03:00.0 [ 88.539785] call ata8+ returned 0 after 1 usecs [ 88.539799] call 00:02+ returned 0 after 63 usecs [ 88.539799] calling 00:03+ @ 4332, parent: pnp0 [ 88.539800] call 00:03+ returned 0 after 0 usecs [ 88.539801] calling 00:04+ @ 4332, parent: pnp0 [ 88.539801] call 00:04+ returned 0 after 0 usecs [ 88.539802] calling 00:05+ @ 4332, parent: pnp0 [ 88.539802] call 00:05+ returned 0 after 0 usecs [ 88.539802] calling 00:06+ @ 4332, parent: pnp0 [ 88.539803] call 00:06+ returned 0 after 0 usecs [ 88.539812] calling pcspkr+ @ 4332, parent: platform [ 88.539813] call pcspkr+ returned 0 after 0 usecs [ 88.539814] calling platform-framebuffer.0+ @ 4332, parent: platform [ 88.539814] call platform-framebuffer.0+ returned 0 after 0 usecs [ 88.539815] calling alarmtimer+ @ 4332, parent: platform [ 88.539816] call alarmtimer+ returned 0 after 0 usecs [ 88.539819] calling host6+ @ 4316, parent: ata7 [ 88.539820] call host6+ returned 0 after 0 usecs [ 88.539821] calling host7+ @ 4316, parent: ata8 [ 88.539822] calling serial8250+ @ 4332, parent: platform [ 88.539822] call host7+ returned 0 after 0 usecs [ 88.539823] call serial8250+ returned 0 after 0 usecs [ 88.540730] calling usb3+ @ 4293, parent: 0000:00:14.0 [ 88.540766] calling usb4+ @ 4274, parent: 0000:00:14.0 [ 88.540784] [drm:intel_opregion_setup] graphic opregion physical addr: 0x8cab1018 [ 88.540788] calling target1:0:0+ @ 4267, parent: host1 [ 88.540789] call target1:0:0+ returned 0 after 0 usecs [ 88.540792] [drm:intel_opregion_setup] Public ACPI methods supported [ 88.540792] [drm:intel_opregion_setup] SWSCI supported [ 88.540795] calling 1:0:0:0+ @ 4264, parent: target1:0:0 [ 88.540796] call 1:0:0:0+ returned 0 after 0 usecs [ 88.540812] calling target7:0:0+ @ 4309, parent: host7 [ 88.540813] call target7:0:0+ returned 0 after 0 usecs [ 88.540815] calling 7:0:0:0+ @ 4302, parent: target7:0:0 [ 88.540816] call 7:0:0:0+ returned 0 after 0 usecs [ 88.540909] sd 7:0:0:0: [sda] Starting disk [ 88.541539] call 0000:00:03.0+ returned 0 after 2079 usecs [ 88.543319] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 88.543320] call 0000:00:1a.0+ returned 0 after 3804 usecs [ 88.543323] calling usb1+ @ 4316, parent: 0000:00:1a.0 [ 88.543409] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 88.543409] call 0000:00:1d.0+ returned 0 after 3803 usecs [ 88.543412] calling usb2+ @ 4301, parent: 0000:00:1d.0 [ 88.546076] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 [ 88.546076] [drm:intel_opregion_setup] ASLE supported [ 88.618160] [drm:intel_crt_reset] pch crt adpa set to 0xf40018 [ 88.618165] [drm:init_status_page] render ring hws offset: 0x7fff0000 [ 88.620207] [drm:init_status_page] bsd ring hws offset: 0x00226000 [ 88.620225] [drm:init_status_page] blitter ring hws offset: 0x00247000 [ 88.620239] [drm:init_status_page] video enhancement ring hws offset: 0x00268000 [ 88.620331] [drm:intel_modeset_readout_hw_state] [CRTC:8] hw state readout: disabled [ 88.620332] [drm:intel_modeset_readout_hw_state] [CRTC:12] hw state readout: disabled [ 88.620333] [drm:intel_modeset_readout_hw_state] [CRTC:16] hw state readout: disabled [ 88.620334] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: refcount 0, on 0 [ 88.620335] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: refcount 0, on 0 [ 88.620336] [drm:intel_modeset_readout_hw_state] [ENCODER:19:DAC-19] hw state readout: disabled, pipe A [ 88.620337] [drm:intel_modeset_readout_hw_state] [ENCODER:20:TMDS-20] hw state readout: disabled, pipe A [ 88.620338] [drm:intel_modeset_readout_hw_state] [ENCODER:25:TMDS-25] hw state readout: disabled, pipe A [ 88.620338] [drm:intel_modeset_readout_hw_state] [ENCODER:27:TMDS-27] hw state readout: disabled, pipe A [ 88.620339] [drm:intel_modeset_readout_hw_state] [ENCODER:29:DP MST-29] hw state readout: disabled, pipe A [ 88.620340] [drm:intel_modeset_readout_hw_state] [ENCODER:30:DP MST-30] hw state readout: disabled, pipe B [ 88.620340] [drm:intel_modeset_readout_hw_state] [ENCODER:31:DP MST-31] hw state readout: disabled, pipe C [ 88.620341] [drm:intel_modeset_readout_hw_state] [CONNECTOR:18:VGA-1] hw state readout: disabled [ 88.620342] [drm:intel_modeset_readout_hw_state] [CONNECTOR:21:HDMI-A-1] hw state readout: disabled [ 88.620343] [drm:intel_modeset_readout_hw_state] [CONNECTOR:26:HDMI-A-2] hw state readout: disabled [ 88.620344] [drm:intel_modeset_readout_hw_state] [CONNECTOR:28:DP-1] hw state readout: disabled [ 88.620344] [drm:intel_modeset_readout_hw_state] [CONNECTOR:32:HDMI-A-3] hw state readout: disabled [ 88.620346] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe A [ 88.620347] [drm:i915_get_vblank_timestamp] crtc 0 is disabled [ 88.620348] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe A [ 88.620349] [drm:intel_dump_pipe_config] [CRTC:8][setup_hw_state] config for pipe A [ 88.620349] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 88.620350] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 88.620351] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 88.620352] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 88.620352] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 88.620353] [drm:intel_dump_pipe_config] requested mode: [ 88.620354] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 88.620354] [drm:intel_dump_pipe_config] adjusted mode: [ 88.620355] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 88.620356] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 88.620357] [drm:intel_dump_pipe_config] port clock: 0 [ 88.620357] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 88.620358] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 88.620359] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 88.620359] [drm:intel_dump_pipe_config] ips: 0 [ 88.620359] [drm:intel_dump_pipe_config] double wide: 0 [ 88.620360] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B [ 88.620361] [drm:i915_get_vblank_timestamp] crtc 1 is disabled [ 88.620361] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B [ 88.620362] [drm:intel_dump_pipe_config] [CRTC:12][setup_hw_state] config for pipe B [ 88.620362] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 88.620363] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 88.620363] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 88.620364] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 88.620365] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 88.620365] [drm:intel_dump_pipe_config] requested mode: [ 88.620366] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 88.620366] [drm:intel_dump_pipe_config] adjusted mode: [ 88.620367] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 88.620368] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 88.620368] [drm:intel_dump_pipe_config] port clock: 0 [ 88.620369] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 88.620369] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 88.620370] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 88.620370] [drm:intel_dump_pipe_config] ips: 0 [ 88.620370] [drm:intel_dump_pipe_config] double wide: 0 [ 88.620371] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C [ 88.620372] [drm:i915_get_vblank_timestamp] crtc 2 is disabled [ 88.620372] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C [ 88.620373] [drm:intel_dump_pipe_config] [CRTC:16][setup_hw_state] config for pipe C [ 88.620373] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 88.620373] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 88.620374] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 88.620375] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 88.620375] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 88.620376] [drm:intel_dump_pipe_config] requested mode: [ 88.620377] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 88.620377] [drm:intel_dump_pipe_config] adjusted mode: [ 88.620378] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 88.620378] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 88.620379] [drm:intel_dump_pipe_config] port clock: 0 [ 88.620379] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 88.620380] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 88.620380] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 88.620380] [drm:intel_dump_pipe_config] ips: 0 [ 88.620381] [drm:intel_dump_pipe_config] double wide: 0 [ 88.620384] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 88.620385] [drm:connected_sink_compute_bpp] [CONNECTOR:18:VGA-1] checking for sink bpp constrains [ 88.620387] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 2 [ 88.620387] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 88.620388] [drm:intel_dump_pipe_config] [CRTC:8][modeset] config for pipe A [ 88.620388] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 88.620389] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 88.620389] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64 [ 88.620390] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 88.620391] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 88.620391] [drm:intel_dump_pipe_config] requested mode: [ 88.620392] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 88.620393] [drm:intel_dump_pipe_config] adjusted mode: [ 88.620394] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 88.620395] [drm:intel_dump_crtc_timings] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 [ 88.620395] [drm:intel_dump_pipe_config] port clock: 270000 [ 88.620396] [drm:intel_dump_pipe_config] pipe src size: 1280x1024 [ 88.620396] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 88.620397] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 88.620397] [drm:intel_dump_pipe_config] ips: 0 [ 88.620397] [drm:intel_dump_pipe_config] double wide: 0 [ 88.621295] [drm:hsw_fdi_link_train] FDI link training done on step 0 [ 88.623191] [drm:lpt_program_iclkip] iCLKIP clock: found settings for 108000KHz refresh rate: auxdiv=0, divsel=17, phasedir=0, phaseinc=0 [ 88.629187] [drm:ironlake_update_primary_plane] Writing base 0028A000 00000000 0 0 5120 [ 88.629190] [drm:intel_update_fbc] disabled per chip default [ 88.629192] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 88.629195] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 88.629198] [drm:intel_connector_check_state] [CONNECTOR:18:VGA-1] [ 88.629200] [drm:check_encoder_state] [ENCODER:19:DAC-19] [ 88.629201] [drm:check_encoder_state] [ENCODER:20:TMDS-20] [ 88.629202] [drm:check_encoder_state] [ENCODER:25:TMDS-25] [ 88.629202] [drm:check_encoder_state] [ENCODER:27:TMDS-27] [ 88.629203] [drm:check_encoder_state] [ENCODER:29:DP MST-29] [ 88.629204] [drm:check_encoder_state] [ENCODER:30:DP MST-30] [ 88.629204] [drm:check_encoder_state] [ENCODER:31:DP MST-31] [ 88.629205] [drm:check_crtc_state] [CRTC:8] [ 88.629212] [drm:check_crtc_state] [CRTC:12] [ 88.629213] [drm:check_crtc_state] [CRTC:16] [ 88.629214] [drm:check_shared_dpll_state] WRPLL 1 [ 88.629215] [drm:check_shared_dpll_state] WRPLL 2 [ 88.629220] [drm:intel_crt_detect] [CONNECTOR:18:VGA-1] force=0 [ 88.629221] [drm:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x83f40018 [ 88.632898] e1000e 0000:00:19.0: irq 35 for MSI/MSI-X [ 88.639201] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x83f40018, result 1 [ 88.639202] [drm:intel_crt_detect] CRT detected via hotplug [ 88.639204] [drm:drm_helper_hpd_irq_event] [CONNECTOR:18:VGA-1] status updated from unknown to connected [ 88.639216] [drm:drm_fb_helper_hotplug_event] [ 88.639217] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:18:VGA-1] [ 88.639219] [drm:intel_crt_detect] [CONNECTOR:18:VGA-1] force=1 [ 88.639220] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x83f40018, result 1 [ 88.639221] [drm:intel_crt_detect] CRT detected via hotplug [ 88.651929] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 88.651934] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:18:VGA-1] probed modes : [ 88.651935] [drm:drm_mode_debug_printmodeline] Modeline 35:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 88.651936] [drm:drm_mode_debug_printmodeline] Modeline 41:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 88.651937] [drm:drm_mode_debug_printmodeline] Modeline 36:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 88.651939] [drm:drm_mode_debug_printmodeline] Modeline 42:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 88.651940] [drm:drm_mode_debug_printmodeline] Modeline 43:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 88.651941] [drm:drm_mode_debug_printmodeline] Modeline 44:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 88.651942] [drm:drm_mode_debug_printmodeline] Modeline 37:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 88.651943] [drm:drm_mode_debug_printmodeline] Modeline 38:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 88.651944] [drm:drm_mode_debug_printmodeline] Modeline 39:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 88.651944] [drm:drm_mode_debug_printmodeline] Modeline 40:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 88.651945] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-1] [ 88.651946] [drm:intel_hdmi_detect] [CONNECTOR:21:HDMI-A-1] [ 88.652101] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 88.652101] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 88.652102] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:HDMI-A-1] disconnected [ 88.652102] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-2] [ 88.652103] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2] [ 88.652269] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 88.652270] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 88.652271] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-2] disconnected [ 88.652272] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] [ 88.652273] [drm:intel_dp_detect] [CONNECTOR:28:DP-1] [ 88.652275] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] disconnected [ 88.652275] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-3] [ 88.652276] [drm:intel_hdmi_detect] [CONNECTOR:32:HDMI-A-3] [ 88.652427] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [ 88.652428] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd [ 88.652429] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-3] disconnected [ 88.652430] [drm:drm_setup_crtcs] [ 88.652431] [drm:drm_enable_connectors] connector 18 enabled? yes [ 88.652432] [drm:drm_enable_connectors] connector 21 enabled? no [ 88.652432] [drm:drm_enable_connectors] connector 26 enabled? no [ 88.652432] [drm:drm_enable_connectors] connector 28 enabled? no [ 88.652433] [drm:drm_enable_connectors] connector 32 enabled? no [ 88.652434] [drm:intel_fb_initial_config] looking for cmdline mode on connector VGA-1 [ 88.652434] [drm:intel_fb_initial_config] looking for preferred mode on connector VGA-1 [ 88.652435] [drm:intel_fb_initial_config] connector VGA-1 on pipe A [CRTC:8]: 1280x1024 [ 88.652436] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 88.652436] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 88.652437] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 88.652437] [drm:intel_fb_initial_config] connector HDMI-A-3 not enabled, skipping [ 88.652438] [drm:drm_setup_crtcs] desired mode 1280x1024 set on crtc 8 [ 88.652440] [drm:intel_crtc_set_config] [CRTC:8] [FB:46] #connectors=1 (x y) (0 0) [ 88.652442] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 88.652442] [drm:intel_modeset_stage_output_state] [CONNECTOR:18:VGA-1] to [CRTC:8] [ 88.652444] [drm:intel_crtc_set_config] [CRTC:12] [NOFB] [ 88.652445] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0 [ 88.652445] [drm:intel_modeset_stage_output_state] [CONNECTOR:18:VGA-1] to [CRTC:8] [ 88.652446] [drm:intel_crtc_set_config] [CRTC:16] [NOFB] [ 88.652447] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=0, fb_changed=0 [ 88.652447] [drm:intel_modeset_stage_output_state] [CONNECTOR:18:VGA-1] to [CRTC:8] [ 88.652951] [drm:intel_crtc_set_config] [CRTC:8] [FB:46] #connectors=1 (x y) (0 0) [ 88.652951] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 88.652952] [drm:intel_modeset_stage_output_state] [CONNECTOR:18:VGA-1] to [CRTC:8] [ 88.654314] call 0000:00:19.0+ returned 0 after 112101 usecs [ 88.654320] calling i8042+ @ 4332, parent: platform [ 88.654703] call i8042+ returned 0 after 372 usecs [ 88.654703] calling serio0+ @ 4332, parent: i8042 [ 88.654705] call serio0+ returned 0 after 1 usecs [ 88.654768] calling serio1+ @ 4332, parent: i8042 [ 88.654770] call serio1+ returned 0 after 0 usecs [ 88.654771] calling rtc0+ @ 4332, parent: 00:02 [ 88.654772] call rtc0+ returned 0 after 0 usecs [ 88.654776] calling input3+ @ 4332, parent: PNP0C0C:00 [ 88.654777] call input3+ returned 0 after 0 usecs [ 88.654777] calling input4+ @ 4332, parent: LNXPWRBN:00 [ 88.654778] call input4+ returned 0 after 0 usecs [ 88.656219] call 0000:00:02.0+ returned 0 after 113981 usecs [ 88.656222] calling i2c-0+ @ 4332, parent: 0000:00:02.0 [ 88.656223] call i2c-0+ returned 0 after 0 usecs [ 88.656223] calling i2c-1+ @ 4332, parent: 0000:00:02.0 [ 88.656224] call i2c-1+ returned 0 after 0 usecs [ 88.656224] calling i2c-2+ @ 4332, parent: 0000:00:02.0 [ 88.656225] call i2c-2+ returned 0 after 0 usecs [ 88.656225] calling i2c-3+ @ 4332, parent: 0000:00:02.0 [ 88.656226] call i2c-3+ returned 0 after 0 usecs [ 88.656227] calling i2c-4+ @ 4332, parent: 0000:00:02.0 [ 88.656227] call i2c-4+ returned 0 after 0 usecs [ 88.656227] calling i2c-5+ @ 4332, parent: 0000:00:02.0 [ 88.656228] call i2c-5+ returned 0 after 0 usecs [ 88.656229] calling i2c-6+ @ 4332, parent: 0000:00:02.0 [ 88.656229] call i2c-6+ returned 0 after 0 usecs [ 88.656230] calling acpi_video0+ @ 4332, parent: 0000:00:02.0 [ 88.656231] call acpi_video0+ returned 0 after 0 usecs [ 88.656231] calling input5+ @ 4332, parent: LNXVIDEO:00 [ 88.656232] call input5+ returned 0 after 0 usecs [ 88.656234] calling iTCO_wdt+ @ 4332, parent: 0000:00:1f.0 [ 88.656234] call iTCO_wdt+ returned 0 after 0 usecs [ 88.656235] calling input6+ @ 4332, parent: pcspkr [ 88.656243] call input6+ returned 0 after 7 usecs [ 88.697278] call 0000:00:1b.0+ returned 0 after 154005 usecs [ 88.742303] call usb4+ returned 0 after 196638 usecs [ 88.742308] calling 4-3+ @ 40, parent: usb4 [ 88.745286] call usb2+ returned 0 after 196968 usecs [ 88.745290] calling 2-1+ @ 4309, parent: usb2 [ 88.745294] call usb1+ returned 0 after 197060 usecs [ 88.745299] calling 1-1+ @ 4267, parent: usb1 [ 88.753278] call usb3+ returned 0 after 207381 usecs [ 88.753283] calling 3-3+ @ 4239, parent: usb3 [ 88.753309] calling 3-4+ @ 4230, parent: usb3 [ 88.844400] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 88.844416] ata7: SATA link down (SStatus 0 SControl 300) [ 88.844652] usb 4-3: reset SuperSpeed USB device number 2 using xhci_hcd [ 88.847390] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 88.847410] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 88.848272] ata2.00: configured for UDMA/100 [ 88.856662] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880255c656c0 [ 88.906547] usb 3-3: reset high-speed USB device number 2 using xhci_hcd [ 88.978972] call 4-3+ returned 0 after 230911 usecs [ 88.999518] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 89.000082] ata8.00: configured for UDMA/133 [ 89.064326] call 1-1+ returned 0 after 311273 usecs [ 89.064602] call 2-1+ returned 0 after 311551 usecs [ 89.071804] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802566a71e0 [ 89.223828] usb 3-4: reset full-speed USB device number 3 using xhci_hcd [ 89.274761] call 3-3+ returned 0 after 508804 usecs [ 89.274766] calling 3-3.4+ @ 4225, parent: 3-3 [ 89.274767] calling 3-3.3+ @ 4256, parent: 3-3 [ 89.388328] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800028b9400 [ 89.388329] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800028b9490 [ 89.388330] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800028b9448 [ 89.388331] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880250d02d08 [ 89.388332] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880250d02cc0 [ 89.388796] call 3-4+ returned 0 after 620042 usecs [ 89.659223] usb 3-3.4: reset low-speed USB device number 6 using xhci_hcd [ 89.790231] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 89.794210] [drm:gen6_enable_rps] Overclocking supported. Max: 1250MHz, Overclock max: 1250MHz [ 89.942899] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880002c5dc60 [ 89.942902] usb 3-3.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 89.945381] call 3-3.4+ returned 0 after 654317 usecs [ 90.212736] usb 3-3.3: reset low-speed USB device number 4 using xhci_hcd [ 90.497460] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802558ad180 [ 90.497461] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802558ad5a0 [ 90.497464] usb 3-3.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 90.497466] usb 3-3.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 90.504960] call 3-3.3+ returned 0 after 1200297 usecs [ 90.505030] calling input7+ @ 4332, parent: 0003:0461:0010.0001 [ 90.505049] call input7+ returned 0 after 17 usecs [ 90.505066] calling input8+ @ 4332, parent: 0003:0461:0010.0002 [ 90.505066] call input8+ returned 0 after 0 usecs [ 90.505069] calling input10+ @ 4332, parent: 0003:046D:C05A.0004 [ 90.505069] call input10+ returned 0 after 0 usecs [ 90.505071] PM: restore of devices complete after 1963.963 msecs [ 91.009046] PM: Image restored successfully. [ 91.009765] PM: Basic memory bitmaps freed [ 91.010460] Restarting tasks ... done. [ 91.011877] video LNXVIDEO:00: Restoring backlight state [ 92.790400] e1000e: eno1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 92.791100] e1000e 0000:00:19.0 eno1: 10/100 speed: disabling TSO