[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.17.0-rc4_drm-intel-nightly_43df30_20140916+ (buildtopcommit@x-kernel) (gcc version 4.7.0 20120507 (Red Hat 4.7.0-5) (GCC) ) #2512 SMP Tue Sep 16 11:26:52 CST 2014 [ 0.000000] Command line: BOOT_IMAGE=kernels//nightly_parents/2014_09_16/drm-intel-nightly/43df30da20447e2856b2761215ff274886a9f931/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//nightly_parents/2014_09_16/drm-intel-nightly/43df30da20447e2856b2761215ff274886a9f931/modules_x86_64/lib/modules/3.17.0-rc4_drm-intel-nightly_43df30_20140916+ acpi_rsdp=0xac7e1014 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000100-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ac1dbfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ac1dc000-0x00000000ac743fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ac744000-0x00000000ac796fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ac797000-0x00000000ac7e1fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000ac7e2000-0x00000000ac7fefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI not present or invalid. [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x14f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable [ 0.000000] 1 base 00B0000000 mask 7FF0000000 uncachable [ 0.000000] 2 base 00AE000000 mask 7FFE000000 uncachable [ 0.000000] 3 base 00AD800000 mask 7FFF800000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xac7ff max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x033b9000, 0x033b9fff] PGTABLE [ 0.000000] BRK [0x033ba000, 0x033bafff] PGTABLE [ 0.000000] BRK [0x033bb000, 0x033bbfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x14ee00000-0x14effffff] [ 0.000000] [mem 0x14ee00000-0x14effffff] page 2M [ 0.000000] BRK [0x033bc000, 0x033bcfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x14c000000-0x14edfffff] [ 0.000000] [mem 0x14c000000-0x14edfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x14bffffff] [ 0.000000] [mem 0x100000000-0x13fffffff] page 1G [ 0.000000] [mem 0x140000000-0x14bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xac1dbfff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G [ 0.000000] [mem 0x80000000-0xabffffff] page 2M [ 0.000000] [mem 0xac000000-0xac1dbfff] page 4k [ 0.000000] init_memory_mapping: [mem 0xac7e2000-0xac7fefff] [ 0.000000] [mem 0xac7e2000-0xac7fefff] page 4k [ 0.000000] BRK [0x033bd000, 0x033bdfff] PGTABLE [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000AC7E1014 000024 (v02 INTEL ) [ 0.000000] ACPI: XSDT 0x00000000AC7A9188 000114 (v01 INTEL BDW-ULT 00000000 01000013) [ 0.000000] ACPI: FACP 0x00000000AC7D7000 0000F4 (v05 INTEL BDW-ULT 00000000 MSFT 0000005F) [ 0.000000] ACPI: DSDT 0x00000000AC7B4000 01ED20 (v02 INTEL BDW 00000000 INTL 20130927) [ 0.000000] ACPI: FACS 0x00000000AC77E000 000040 [ 0.000000] ACPI: TCPA 0x00000000AC7DF000 000032 (v02 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: UEFI 0x00000000AC781000 000042 (v01 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: SSDT 0x00000000AC7DE000 0004B5 (v01 Intel_ Tpm2Tabl 00001000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AC7DD000 00004E (v01 MeSsdt MeSsdt 00003000 INTL 20130927) [ 0.000000] ACPI: TPM2 0x00000000AC7DC000 000034 (v03 00000000 00000000) [ 0.000000] ACPI: SSDT 0x00000000AC7DB000 0005B1 (v01 Intel PerfTune 00001000 INTL 20130927) [ 0.000000] ACPI: DBGP 0x00000000AC7DA000 000034 (v01 INTEL 00000000 MSFT 0000005F) [ 0.000000] ACPI: DBG2 0x00000000AC7D9000 000054 (v00 INTEL 00000000 MSFT 0000005F) [ 0.000000] ACPI: LPIT 0x00000000AC7D8000 000094 (v01 INTEL BDW-ULT 00000000 MSFT 0000005F) [ 0.000000] ACPI: HPET 0x00000000AC7D6000 000038 (v01 INTEL BDW-ULT 00000001 MSFT 0000005F) [ 0.000000] ACPI: APIC 0x00000000AC7D5000 0000BC (v01 INTEL BDW-ULT 00000001 MSFT 0000005F) [ 0.000000] ACPI: MCFG 0x00000000AC7D4000 00003C (v01 INTEL BDW-ULT 00000001 MSFT 0000005F) [ 0.000000] ACPI: WDAT 0x00000000AC7D3000 000104 (v01 INTEL BDW-ULT 00000000 MSFT 0000005F) [ 0.000000] ACPI: SSDT 0x00000000AC7B3000 000250 (v01 INTEL sensrhub 00000000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AC7AF000 00340B (v01 INTEL PtidDevc 00001000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AC7AE000 000C7D (v01 INTEL Ther_Rvp 00001000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AC7AD000 00017F (v01 INTEL zpodd 00001000 INTL 20130927) [ 0.000000] ACPI: BOOT 0x00000000AC7AC000 000028 (v01 INTEL TIANO 00000002 MSFT 01000013) [ 0.000000] ACPI: SSDT 0x00000000AC7AB000 00057D (v01 PmRef Cpu0Ist 00003000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AC7AA000 000B74 (v01 CpuRef CpuSsdt 00003000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AC7A2000 006F08 (v01 SaSsdt SaSsdt 00003000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AC7E0000 0006A7 (v01 CppcTa CppcTabl 00001000 INTL 20130927) [ 0.000000] ACPI: PCCT 0x00000000AC7A1000 00006E (v05 PcctTa PcctTabl 00001000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AC7A0000 000AC4 (v01 Cpc_Ta Cpc_Tabl 00001000 INTL 20130927) [ 0.000000] ACPI: CSRT 0x00000000AC79F000 0000C4 (v01 INTL BDW-ULT 00000001 INTL 20100528) [ 0.000000] ACPI: DMAR 0x00000000AC79E000 0000F0 (v01 INTEL BDW 00000001 INTL 00000001) [ 0.000000] ACPI: FPDT 0x00000000AC79D000 000044 (v01 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: ASF! 0x00000000AC79C000 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: BGRT 0x00000000AC79B000 000038 (v01 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000014effffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x14effffff] [ 0.000000] NODE_DATA [mem 0x14effa000-0x14effdfff] [ 0.000000] [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014a600000-ffff88014e5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x14effffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x00057fff] [ 0.000000] node 0: [mem 0x00059000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xac1dbfff] [ 0.000000] node 0: [mem 0xac7e2000-0xac7fefff] [ 0.000000] node 0: [mem 0x100000000-0x14effffff] [ 0.000000] On node 0 totalpages: 1028502 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 26 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10952 pages used for memmap [ 0.000000] DMA32 zone: 700921 pages, LIFO batch:31 [ 0.000000] Normal zone: 5056 pages used for memmap [ 0.000000] Normal zone: 323584 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0xae000000-0xafffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xac1dc000-0xac743fff] [ 0.000000] PM: Registered nosave memory: [mem 0xac744000-0xac796fff] [ 0.000000] PM: Registered nosave memory: [mem 0xac797000-0xac7e1fff] [ 0.000000] PM: Registered nosave memory: [mem 0xac7ff000-0xadffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xae000000-0xafffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb0000000-0xe00f7fff] [ 0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff] [ 0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xff9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff] [ 0.000000] e820: [mem 0xb0000000-0xe00f7fff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88014ec00000 s78528 r8192 d23872 u262144 [ 0.000000] pcpu-alloc: s78528 r8192 d23872 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1012404 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=kernels//nightly_parents/2014_09_16/drm-intel-nightly/43df30da20447e2856b2761215ff274886a9f931/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//nightly_parents/2014_09_16/drm-intel-nightly/43df30da20447e2856b2761215ff274886a9f931/modules_x86_64/lib/modules/3.17.0-rc4_drm-intel-nightly_43df30_20140916+ acpi_rsdp=0xac7e1014 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3944716K/4114008K available (7730K kernel code, 900K rwdata, 3944K rodata, 23332K init, 624K bss, 169292K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS:4352 nr_irqs:760 0 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2095.163 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4190.32 BogoMIPS (lpj=2095163) [ 0.000007] pid_max: default: 32768 minimum: 301 [ 0.000014] ACPI: Core revision 20140724 [ 0.026963] ACPI: All ACPI Tables successfully acquired [ 0.026992] Security Framework initialized [ 0.027250] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.028032] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.028368] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.028375] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.028589] CPU: Physical Processor ID: 0 [ 0.028592] CPU: Processor Core ID: 0 [ 0.029688] mce: CPU supports 7 MCE banks [ 0.029699] CPU0: Thermal LVT vector (0xfa) already installed [ 0.029707] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.029707] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.030127] Freeing SMP alternatives memory: 32K (ffffffff83314000 - ffffffff8331c000) [ 0.030784] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.040794] smpboot: CPU0: Intel(R) Core(TM) i3-5010U CPU @ 2.10GHz (fam: 06, model: 3d, stepping: 04) [ 0.040804] TSC deadline timer enabled [ 0.040828] Performance Events: PEBS fmt2+, generic architected perfmon, full-width counters, Intel PMU driver. [ 0.040836] ... version: 3 [ 0.040838] ... bit width: 48 [ 0.040840] ... generic registers: 4 [ 0.040842] ... value mask: 0000ffffffffffff [ 0.040844] ... max period: 0000ffffffffffff [ 0.040846] ... fixed-purpose events: 3 [ 0.040848] ... event mask: 000000070000000f [ 0.041131] x86: Booting SMP configuration: [ 0.041134] .... node #0, CPUs: #1 [ 0.053384] CPU1: Thermal LVT vector (0xfa) already installed [ 0.055533] #2<7>[ 0.067790] CPU2: Thermal LVT vector (0xfa) already installed [ 0.082193] #3 [ 0.082193] CPU3: Thermal LVT vector (0xfa) already installed [ 0.084287] x86: Booted up 1 node, 4 CPUs [ 0.084295] smpboot: Total of 4 processors activated (16761.30 BogoMIPS) [ 0.087941] devtmpfs: initialized [ 0.088258] PM: Registering ACPI NVS region [mem 0xac744000-0xac796fff] (339968 bytes) [ 0.088459] xor: automatically using best checksumming function: [ 0.097740] avx : 20556.000 MB/sec [ 0.097779] RTC time: 18:32:41, date: 09/16/14 [ 0.097879] NET: Registered protocol family 16 [ 0.098102] cpuidle: using governor ladder [ 0.098105] cpuidle: using governor menu [ 0.098215] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.098218] ACPI: bus type PCI registered [ 0.098259] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.098263] PCI: not using MMCONFIG [ 0.098265] PCI: Using configuration type 1 for base access [ 0.117788] raid6: sse2x1 6484 MB/s [ 0.134817] raid6: sse2x2 7804 MB/s [ 0.151841] raid6: sse2x4 9371 MB/s [ 0.168874] raid6: avx2x1 12726 MB/s [ 0.185905] raid6: avx2x2 14585 MB/s [ 0.202934] raid6: avx2x4 16964 MB/s [ 0.202936] raid6: using algorithm avx2x4 (16964 MB/s) [ 0.202939] raid6: using avx2x2 recovery algorithm [ 0.202980] ACPI: Added _OSI(Module Device) [ 0.202983] ACPI: Added _OSI(Processor Device) [ 0.202985] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.202987] ACPI: Added _OSI(Processor Aggregator Device) [ 0.213664] ACPI: Executed 18 blocks of module-level executable AML code [ 0.247165] ACPI: Dynamic OEM Table Load: [ 0.247183] ACPI: SSDT 0xFFFF8801493E1800 0004AE (v01 PmRef Cpu0Cst 00003001 INTL 20130927) [ 0.252313] ACPI: Dynamic OEM Table Load: [ 0.252329] ACPI: SSDT 0xFFFF8801493E2000 000792 (v01 PmRef ApIst 00003000 INTL 20130927) [ 0.258186] ACPI: Dynamic OEM Table Load: [ 0.258199] ACPI: SSDT 0xFFFF880148C1D600 000119 (v01 PmRef ApCst 00003000 INTL 20130927) [ 0.266183] ACPI: Interpreter enabled [ 0.266192] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580) [ 0.266202] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580) [ 0.266223] ACPI: (supports S0 S3 S4 S5) [ 0.266226] ACPI: Using IOAPIC for interrupt routing [ 0.266249] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.268317] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.268542] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.269003] ACPI: Power Resource [PG00] (on) [ 0.273413] ACPI: Power Resource [PG01] (on) [ 0.278425] ACPI: Power Resource [PG02] (on) [ 0.308033] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1) [ 0.309293] ACPI: Power Resource [FN00] (off) [ 0.309370] ACPI: Power Resource [FN01] (off) [ 0.309442] ACPI: Power Resource [FN02] (off) [ 0.309512] ACPI: Power Resource [FN03] (off) [ 0.309584] ACPI: Power Resource [FN04] (off) [ 0.310587] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.310595] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.311398] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.311934] PCI host bridge to bus 0000:00 [ 0.311938] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.311941] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.311944] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.311947] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.311951] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfeafffff] [ 0.311961] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000 [ 0.312188] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000 [ 0.312201] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd0ffffff 64bit] [ 0.312208] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.312215] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.312437] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300 [ 0.312445] pci 0000:00:03.0: reg 0x10: [mem 0xd1030000-0xd1033fff 64bit] [ 0.312680] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330 [ 0.312698] pci 0000:00:14.0: reg 0x10: [mem 0xd1020000-0xd102ffff 64bit] [ 0.312755] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.312929] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.312975] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000 [ 0.312993] pci 0000:00:16.0: reg 0x10: [mem 0xd1035000-0xd103501f 64bit] [ 0.313053] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.313265] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000 [ 0.313281] pci 0000:00:19.0: reg 0x10: [mem 0xd1000000-0xd101ffff] [ 0.313292] pci 0000:00:19.0: reg 0x14: [mem 0xd1038000-0xd1038fff] [ 0.313300] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f] [ 0.313357] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.313546] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.313595] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100 [ 0.313900] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601 [ 0.313915] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af] [ 0.313922] pci 0000:00:1f.2: reg 0x14: [io 0x30b4-0x30b7] [ 0.313929] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7] [ 0.313936] pci 0000:00:1f.2: reg 0x1c: [io 0x30b0-0x30b3] [ 0.313944] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.313951] pci 0000:00:1f.2: reg 0x24: [mem 0xd1037000-0xd10377ff] [ 0.313986] pci 0000:00:1f.2: PME# supported from D3hot [ 0.314185] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500 [ 0.314199] pci 0000:00:1f.3: reg 0x10: [mem 0xd1034000-0xd10340ff 64bit] [ 0.314218] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.314438] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000 [ 0.314465] pci 0000:00:1f.6: reg 0x10: [mem 0xd1036000-0xd1036fff 64bit] [ 0.314738] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported) [ 0.316845] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15), disabled. [ 0.316899] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.316949] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15), disabled. [ 0.316998] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15), disabled. [ 0.317046] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15), disabled. [ 0.317094] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.317142] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.317190] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.317706] ACPI: Enabled 4 GPEs in block 00 to 7F [ 0.317907] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62 [ 0.318014] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.318018] vgaarb: loaded [ 0.318020] vgaarb: bridge control possible 0000:00:02.0 [ 0.318100] SCSI subsystem initialized [ 0.318148] libata version 3.00 loaded. [ 0.318279] ACPI: bus type USB registered [ 0.318315] usbcore: registered new interface driver usbfs [ 0.318331] usbcore: registered new interface driver hub [ 0.318359] usbcore: registered new device driver usb [ 0.318401] pps_core: LinuxPPS API ver. 1 registered [ 0.318403] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.318412] PTP clock support registered [ 0.318486] PCI: Using ACPI for IRQ routing [ 0.324220] PCI: pci_cache_line_size set to 64 bytes [ 0.324247] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.324249] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.324251] e820: reserve RAM buffer [mem 0xac1dc000-0xafffffff] [ 0.324252] e820: reserve RAM buffer [mem 0xac7ff000-0xafffffff] [ 0.324254] e820: reserve RAM buffer [mem 0x14f000000-0x14fffffff] [ 0.324382] NetLabel: Initializing [ 0.324384] NetLabel: domain hash size = 128 [ 0.324386] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.324400] NetLabel: unlabeled traffic allowed by default [ 0.324517] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.324524] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.326558] Switched to clocksource hpet [ 0.330023] pnp: PnP ACPI init [ 0.330323] system 00:00: [io 0x06a4] has been reserved [ 0.330328] system 00:00: [io 0x06a0] has been reserved [ 0.330332] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.330511] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.330515] system 00:01: [io 0xffff] has been reserved [ 0.330517] system 00:01: [io 0xffff] has been reserved [ 0.330520] system 00:01: [io 0xffff] has been reserved [ 0.330524] system 00:01: [io 0x1800-0x18fe] could not be reserved [ 0.330527] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.330530] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.330583] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.330620] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.330624] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.330735] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.330814] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.331401] system 00:06: [mem 0xfe102000-0xfe102fff] has been reserved [ 0.331406] system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved [ 0.331409] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved [ 0.331412] system 00:06: [mem 0xfe10e000-0xfe10efff] has been reserved [ 0.331415] system 00:06: [mem 0xfe112000-0xfe112fff] has been reserved [ 0.331418] system 00:06: [mem 0xfe111000-0xfe111007] has been reserved [ 0.331422] system 00:06: [mem 0xfe111014-0xfe111fff] has been reserved [ 0.331425] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.332506] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.332510] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.332513] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.332517] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.332520] system 00:07: [mem 0xe0000000-0xefffffff] could not be reserved [ 0.332523] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.332527] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.332531] system 00:07: [mem 0xfed45000-0xfed8ffff] could not be reserved [ 0.332534] system 00:07: [mem 0xff000000-0xffffffff] could not be reserved [ 0.332538] system 00:07: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.332541] system 00:07: [mem 0xb0010000-0xb001ffff] has been reserved [ 0.332544] system 00:07: [mem 0xb0000000-0xb000ffff] has been reserved [ 0.332548] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.332790] system 00:08: [mem 0x00000000-0x0009cfff] could not be reserved [ 0.332794] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.332923] pnp: PnP ACPI: found 9 devices [ 0.339562] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.339573] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.339575] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.339578] pci_bus 0000:00: resource 7 [mem 0xb0000000-0xfeafffff] [ 0.339609] NET: Registered protocol family 2 [ 0.339808] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.339876] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.339941] TCP: Hash tables configured (established 32768 bind 32768) [ 0.339963] TCP: reno registered [ 0.339973] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.339988] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.340041] NET: Registered protocol family 1 [ 0.340102] RPC: Registered named UNIX socket transport module. [ 0.340105] RPC: Registered udp transport module. [ 0.340107] RPC: Registered tcp transport module. [ 0.340109] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.340119] pci 0000:00:02.0: Boot video device [ 0.340205] pci 0000:00:14.0: can't derive routing for PCI INT A [ 0.340208] pci 0000:00:14.0: PCI INT A: no GSI [ 0.340287] pci 0000:00:14.0: can't derive routing for PCI INT A [ 0.340304] PCI: CLS 0 bytes, default 64 [ 0.794852] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.794860] software IO TLB [mem 0xa81dc000-0xac1dc000] (64MB) mapped at [ffff8800a81dc000-ffff8800ac1dbfff] [ 0.794991] Simple Boot Flag at 0x47 set to 0x80 [ 0.795766] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.795824] audit: initializing netlink subsys (disabled) [ 0.795841] audit: type=2000 audit(1410892361.756:1): initialized [ 0.796044] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.797755] VFS: Disk quotas dquot_6.5.2 [ 0.797793] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.798442] NFS: Registering the id_resolver key type [ 0.798450] Key type id_resolver registered [ 0.798452] Key type id_legacy registered [ 0.798459] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.798633] fuse init (API version 7.23) [ 0.798739] msgmni has been set to 7704 [ 0.798978] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.798986] io scheduler noop registered [ 0.798990] io scheduler deadline registered [ 0.799028] io scheduler cfq registered (default) [ 0.799126] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.799266] ACPI: Fan [FAN0] (off) [ 0.799302] ACPI: Fan [FAN1] (off) [ 0.799335] ACPI: Fan [FAN2] (off) [ 0.799367] ACPI: Fan [FAN3] (off) [ 0.799399] ACPI: Fan [FAN4] (off) [ 0.799743] Monitor-Mwait will be used to enter C-1 state [ 0.801387] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.801391] ACPI: Thermal Zone [TZ00] (47 C) [ 0.802094] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.802098] ACPI: Thermal Zone [TZ01] (47 C) [ 0.802150] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.822831] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.823282] Non-volatile memory driver v1.3 [ 0.823289] Linux agpgart interface v0.103 [ 0.824515] brd: module loaded [ 0.824568] Loading iSCSI transport class v2.0-870. [ 0.824710] iscsi: registered transport (tcp) [ 0.824798] Adaptec aacraid driver 1.2-0[30300]-ms [ 0.824828] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 0.824914] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.08-k. [ 0.824960] iscsi: registered transport (qla4xxx) [ 0.824978] QLogic iSCSI HBA Driver [ 0.825023] DC390: clustering now enabled by default. If you get problems load [ 0.825026] with "disable_clustering=1" and report to maintainers [ 0.825066] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 0.825116] RocketRAID 3xxx/4xxx Controller driver v1.8 [ 0.825133] stex: Promise SuperTrak EX Driver version: 4.6.0000.4 [ 0.825177] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 0.825200] osst :I: Tape driver with OnStream support version 0.99.4 [ 0.825200] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 0.825273] SCSI Media Changer driver v0.25 [ 0.825308] ahci 0000:00:1f.2: version 3.0 [ 0.825443] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X [ 0.825485] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x2 impl SATA mode [ 0.825494] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 0.825978] scsi host0: ahci [ 0.826070] scsi host1: ahci [ 0.826148] scsi host2: ahci [ 0.826226] scsi host3: ahci [ 0.826267] ata1: DUMMY [ 0.826270] ata2: SATA max UDMA/133 abar m2048@0xd1037000 port 0xd1037180 irq 40 [ 0.826273] ata3: DUMMY [ 0.826275] ata4: DUMMY [ 0.827140] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.19-0 (2014/02/10) [ 0.827227] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 0.827231] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.827253] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 0.827256] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.827273] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 0.827275] e1000e: Copyright(c) 1999 - 2014 Intel Corporation. [ 0.827402] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.827419] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X [ 0.991337] e1000e 0000:00:19.0 eth0: registered PHC clock [ 0.991341] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:13:20:fc:d6:b4 [ 0.991345] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 0.991372] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 0.991391] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.13-k [ 0.991394] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.991424] usbcore: registered new interface driver catc [ 0.991436] usbcore: registered new interface driver kaweth [ 0.991441] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 0.991453] usbcore: registered new interface driver pegasus [ 0.991465] usbcore: registered new interface driver rtl8150 [ 0.991480] usbcore: registered new interface driver asix [ 0.991493] usbcore: registered new interface driver ax88179_178a [ 0.991506] usbcore: registered new interface driver cdc_ether [ 0.991518] usbcore: registered new interface driver dm9601 [ 0.991531] usbcore: registered new interface driver gl620a [ 0.991544] usbcore: registered new interface driver net1080 [ 0.991558] usbcore: registered new interface driver plusb [ 0.991571] usbcore: registered new interface driver rndis_host [ 0.991584] usbcore: registered new interface driver cdc_subset [ 0.991597] usbcore: registered new interface driver zaurus [ 0.991611] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 0.991632] usbcore: registered new interface driver cdc_ncm [ 0.991723] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.991733] ehci-pci: EHCI PCI platform driver [ 0.991776] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.991794] ohci-pci: OHCI PCI platform driver [ 0.991813] uhci_hcd: USB Universal Host Controller Interface driver [ 0.991942] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A [ 0.991945] xhci_hcd 0000:00:14.0: PCI INT A: no GSI [ 0.991968] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.992011] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.992103] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.992120] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X [ 0.992176] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.992179] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.992183] usb usb1: Product: xHCI Host Controller [ 0.992186] usb usb1: Manufacturer: Linux 3.17.0-rc4_drm-intel-nightly_43df30_20140916+ xhci_hcd [ 0.992189] usb usb1: SerialNumber: 0000:00:14.0 [ 0.992301] hub 1-0:1.0: USB hub found [ 0.992320] hub 1-0:1.0: 11 ports detected [ 0.995613] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.995653] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.995690] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.995694] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.995697] usb usb2: Product: xHCI Host Controller [ 0.995700] usb usb2: Manufacturer: Linux 3.17.0-rc4_drm-intel-nightly_43df30_20140916+ xhci_hcd [ 0.995703] usb usb2: SerialNumber: 0000:00:14.0 [ 0.995808] hub 2-0:1.0: USB hub found [ 0.995819] hub 2-0:1.0: 4 ports detected [ 0.996629] usb: failed to peer usb2-port3 and usb1-port3 by location (usb2-port3:none) (usb1-port3:usb2-port2) [ 0.996634] usb usb2-port3: failed to peer to usb1-port3 (-16) [ 0.996636] usb: port power management may be unreliable [ 0.997132] usbcore: registered new interface driver usb-storage [ 0.997181] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.997185] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.997599] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.997680] mousedev: PS/2 mouse device common for all mice [ 0.997772] rtc_cmos 00:02: RTC can wake from S4 [ 0.997914] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.997944] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.997960] i2c /dev entries driver [ 0.997988] hidraw: raw HID events driver (C) Jiri Kosina [ 0.998209] usbcore: registered new interface driver usbhid [ 0.998212] usbhid: USB HID core driver [ 0.998286] TCP: cubic registered [ 0.998290] Initializing XFRM netlink socket [ 0.998297] NET: Registered protocol family 17 [ 0.998320] Key type dns_resolver registered [ 0.998689] registered taskstats version 1 [ 0.999115] Btrfs loaded [ 0.999368] Magic number: 14:607:544 [ 0.999488] PM: Hibernation image not present or could not be loaded. [ 0.999501] Warning: unable to open an initial console. [ 1.033159] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.131009] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.131260] ata2.00: ATA-9: INTEL SSDSC2BB240G4, D2010370, max UDMA/133 [ 1.131264] ata2.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 1.131558] ata2.00: configured for UDMA/133 [ 1.131656] scsi 1:0:0:0: Direct-Access ATA INTEL SSDSC2BB24 0370 PQ: 0 ANSI: 5 [ 1.131847] sd 1:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB) [ 1.131852] sd 1:0:0:0: [sda] 4096-byte physical blocks [ 1.131866] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 1.131935] sd 1:0:0:0: [sda] Write Protect is off [ 1.131941] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.131965] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.133350] sda: sda1 sda2 sda3 [ 1.133622] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.137828] Freeing unused kernel memory: 23332K (ffffffff81c4b000 - ffffffff83314000) [ 1.169021] dracut: dracut-018-35.git20120510.fc17 [ 1.193400] udevd[1432]: starting version 182 [ 1.208857] [drm] Initialized drm 1.1.0 20060810 [ 1.209795] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 1.213301] ACPI: Lid Switch [LID0] [ 1.213391] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 1.213526] ACPI: Power Button [PWRB] [ 1.213578] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3 [ 1.213622] ACPI: Sleep Button [SLPB] [ 1.213692] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 1.213882] ACPI: Power Button [PWRF] [ 1.217437] [drm:i915_dump_device_info] i915 device info: gen=8, pciid=0x1616 rev=0x08 flags=is_mobile,need_gfx_hws,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg, [ 1.217457] [drm:intel_detect_pch] This is Broadwell, assuming LynxPoint LP PCH [ 1.217528] [drm] Memory usable by graphics device = 4096M [ 1.217535] [drm:i915_gem_gtt_init] GMADR size = 256M [ 1.217537] [drm:i915_gem_gtt_init] GTT stolen size = 32M [ 1.217539] [drm:i915_gem_gtt_init] ppgtt mode: 1 [ 1.217541] [drm] Replacing VGA console driver [ 1.218329] [drm:intel_opregion_setup] graphic opregion physical addr: 0xac776018 [ 1.218338] [drm:intel_opregion_setup] Public ACPI methods supported [ 1.218339] [drm:intel_opregion_setup] SWSCI supported [ 1.224055] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00700483 [ 1.224058] [drm:intel_opregion_setup] ASLE supported [ 1.224147] i915 0000:00:02.0: irq 43 for MSI/MSI-X [ 1.224157] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.224162] [drm] Driver supports precise vblank timestamp query. [ 1.224167] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz [ 1.224170] [drm:validate_vbt] Using VBT from OpRegion: $VBT HASWELL d [ 1.224173] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 1.224175] [drm:parse_general_definitions] crt_ddc_bus_pin: 2 [ 1.224178] [drm:parse_lfp_panel_data] DRRS supported mode is static [ 1.224181] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [ 1.224185] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 0 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x8 0xa [ 1.224187] [drm:parse_lfp_panel_data] VBT initial LVDS value 30033c [ 1.224190] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255 [ 1.224193] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables: [ 1.224197] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 1.224200] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT [ 1.224202] [drm:parse_driver_features] DRRS State Enabled:1 [ 1.224206] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 [ 1.224209] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0 [ 1.224211] [drm:parse_ddi_port] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.224213] [drm:parse_ddi_port] VBT HDMI level shift for port B: 3 [ 1.224216] [drm:parse_ddi_port] Port C VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.224218] [drm:parse_ddi_port] VBT HDMI level shift for port C: 3 [ 1.224284] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 1.224290] [drm:i915_gem_init_stolen] found 33554432 bytes of stolen memory at ae000000 [ 1.224293] [drm:intel_display_power_get] enabling always-on [ 1.224295] [drm:intel_display_power_get] enabling display [ 1.224299] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.224367] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec) [ 1.224369] [drm:intel_print_wm_latency] Primary WM1 latency 50 (25.0 usec) [ 1.224371] [drm:intel_print_wm_latency] Primary WM2 latency 90 (45.0 usec) [ 1.224372] [drm:intel_print_wm_latency] Primary WM3 latency 130 (65.0 usec) [ 1.224374] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec) [ 1.224375] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec) [ 1.224377] [drm:intel_print_wm_latency] Sprite WM1 latency 50 (25.0 usec) [ 1.224378] [drm:intel_print_wm_latency] Sprite WM2 latency 90 (45.0 usec) [ 1.224380] [drm:intel_print_wm_latency] Sprite WM3 latency 130 (65.0 usec) [ 1.224381] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec) [ 1.224383] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec) [ 1.224384] [drm:intel_print_wm_latency] Cursor WM1 latency 50 (25.0 usec) [ 1.224386] [drm:intel_print_wm_latency] Cursor WM2 latency 90 (45.0 usec) [ 1.224387] [drm:intel_print_wm_latency] Cursor WM3 latency 130 (65.0 usec) [ 1.224389] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec) [ 1.224391] [drm:intel_modeset_init] 3 display pipes available. [ 1.224403] [drm:intel_ddi_pll_init] CDCLK running at 675000KHz [ 1.224710] [drm:intel_dp_init_connector] Adding eDP connector on port A [ 1.224762] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000 [ 1.224763] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 1.224765] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600 [ 1.224767] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200 [ 1.224769] [drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1 [ 1.224869] [drm:edp_panel_vdd_on] Turning eDP VDD on [ 1.224878] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 1.225154] [drm:intel_dp_get_dpcd] DPCD: 11 0a 02 00 00 00 00 00 00 00 00 00 00 00 00 [ 1.225325] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 [ 1.247700] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.247702] [drm:intel_dp_drrs_init] VBT doesn't support DRRS [ 1.247737] [drm:intel_panel_setup_backlight] backlight initialized, enabled, brightness 937/937, sysfs interface registered [ 1.247749] [drm:intel_dp_init_connector] Adding DP connector on port B [ 1.247801] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1 [ 1.253073] [drm:intel_modeset_readout_hw_state] [CRTC:8] hw state readout: enabled [ 1.253076] [drm:intel_modeset_readout_hw_state] [CRTC:12] hw state readout: disabled [ 1.253078] [drm:intel_modeset_readout_hw_state] [CRTC:16] hw state readout: disabled [ 1.253080] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: refcount 0, on 0 [ 1.253082] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: refcount 0, on 0 [ 1.253086] [drm:intel_modeset_readout_hw_state] [ENCODER:18:TMDS-18] hw state readout: enabled, pipe A [ 1.253088] [drm:intel_modeset_readout_hw_state] [ENCODER:27:TMDS-27] hw state readout: disabled, pipe A [ 1.253090] [drm:intel_modeset_readout_hw_state] [ENCODER:29:DP MST-29] hw state readout: disabled, pipe A [ 1.253091] [drm:intel_modeset_readout_hw_state] [ENCODER:30:DP MST-30] hw state readout: disabled, pipe B [ 1.253093] [drm:intel_modeset_readout_hw_state] [ENCODER:31:DP MST-31] hw state readout: disabled, pipe C [ 1.253095] [drm:intel_modeset_readout_hw_state] [ENCODER:34:TMDS-34] hw state readout: disabled, pipe A [ 1.253097] [drm:intel_modeset_readout_hw_state] [CONNECTOR:19:eDP-1] hw state readout: enabled [ 1.253099] [drm:intel_modeset_readout_hw_state] [CONNECTOR:28:DP-1] hw state readout: disabled [ 1.253101] [drm:intel_modeset_readout_hw_state] [CONNECTOR:32:HDMI-A-1] hw state readout: disabled [ 1.253103] [drm:intel_modeset_readout_hw_state] [CONNECTOR:35:HDMI-A-2] hw state readout: disabled [ 1.253107] [drm:intel_dump_pipe_config] [CRTC:8][setup_hw_state] config for pipe A [ 1.253108] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 1.253109] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.253111] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.253114] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 1.253115] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.253117] [drm:intel_dump_pipe_config] requested mode: [ 1.253119] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 1920 0 0 0 1080 0 0 0 0x0 0x0 [ 1.253121] [drm:intel_dump_pipe_config] adjusted mode: [ 1.253123] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa [ 1.253125] [drm:intel_dump_crtc_timings] crtc timings: 138779 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x0 flags: 0xa [ 1.253127] [drm:intel_dump_pipe_config] port clock: 270000 [ 1.253128] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 1.253130] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.253132] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x07800438, enabled [ 1.253133] [drm:intel_dump_pipe_config] ips: 0 [ 1.253134] [drm:intel_dump_pipe_config] double wide: 0 [ 1.253138] [drm:i915_get_vblank_timestamp] crtc 1 is disabled [ 1.253141] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B [ 1.253143] [drm:i915_get_vblank_timestamp] crtc 1 is disabled [ 1.253145] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B [ 1.253146] [drm:intel_dump_pipe_config] [CRTC:12][setup_hw_state] config for pipe B [ 1.253148] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 1.253149] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 1.253151] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.253153] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.253154] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.253155] [drm:intel_dump_pipe_config] requested mode: [ 1.253158] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.253159] [drm:intel_dump_pipe_config] adjusted mode: [ 1.253161] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.253163] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.253164] [drm:intel_dump_pipe_config] port clock: 0 [ 1.253166] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 1.253167] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.253169] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.253170] [drm:intel_dump_pipe_config] ips: 0 [ 1.253171] [drm:intel_dump_pipe_config] double wide: 0 [ 1.253173] [drm:i915_get_vblank_timestamp] crtc 2 is disabled [ 1.253176] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C [ 1.253177] [drm:i915_get_vblank_timestamp] crtc 2 is disabled [ 1.253179] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C [ 1.253181] [drm:intel_dump_pipe_config] [CRTC:16][setup_hw_state] config for pipe C [ 1.253182] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 1.253183] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 1.253185] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.253187] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.253189] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.253190] [drm:intel_dump_pipe_config] requested mode: [ 1.253192] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.253193] [drm:intel_dump_pipe_config] adjusted mode: [ 1.253195] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.253197] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.253198] [drm:intel_dump_pipe_config] port clock: 0 [ 1.253199] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 1.253201] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.253203] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.253204] [drm:intel_dump_pipe_config] ips: 0 [ 1.253205] [drm:intel_dump_pipe_config] double wide: 0 [ 1.253210] [drm:intel_connector_check_state] [CONNECTOR:19:eDP-1] [ 1.253213] [drm:check_encoder_state] [ENCODER:18:TMDS-18] [ 1.253215] [drm:check_encoder_state] [ENCODER:27:TMDS-27] [ 1.253217] [drm:check_encoder_state] [ENCODER:29:DP MST-29] [ 1.253218] [drm:check_encoder_state] [ENCODER:30:DP MST-30] [ 1.253219] [drm:check_encoder_state] [ENCODER:31:DP MST-31] [ 1.253220] [drm:check_encoder_state] [ENCODER:34:TMDS-34] [ 1.253222] [drm:check_crtc_state] [CRTC:8] [ 1.253229] [drm:check_crtc_state] [CRTC:12] [ 1.253231] [drm:check_crtc_state] [CRTC:16] [ 1.253232] [drm:check_shared_dpll_state] WRPLL 1 [ 1.253234] [drm:check_shared_dpll_state] WRPLL 2 [ 1.253239] [drm:ironlake_get_plane_config] pipe/plane 0/0 with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000 [ 1.253241] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000 [ 1.253245] [drm:i915_pages_create_for_stolen] offset=0x0, size=8294400 [ 1.253248] [drm:intel_alloc_plane_obj] plane fb obj ffff880002c04000 [ 1.253251] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 7e9000 [ 1.253253] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [7e9000, fffff000] [ 1.256126] [drm:gen8_ppgtt_init] Allocated 4 pages for page directories (0 wasted) [ 1.256129] [drm:gen8_ppgtt_init] Allocated 2048 pages for page tables (0 wasted) [ 1.256165] [drm:i915_gem_context_init] HW context support initialized [ 1.256173] [drm:init_status_page] render ring hws offset: 0x007fb000 [ 1.256252] [drm:intel_init_pipe_control] render ring pipe control offset: 0x0081c000 [ 1.256258] [drm:init_status_page] bsd ring hws offset: 0x0081d000 [ 1.256320] [drm:init_status_page] blitter ring hws offset: 0x0083e000 [ 1.256376] [drm:init_status_page] video enhancement ring hws offset: 0x0085f000 [ 1.256437] [drm:bdw_init_workarounds] Number of Workarounds applied: 8 [ 1.256602] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:eDP-1] [ 1.256604] [drm:intel_dp_detect] [CONNECTOR:19:eDP-1] [ 1.256615] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.256619] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:eDP-1] probed modes : [ 1.256622] [drm:drm_mode_debug_printmodeline] Modeline 20:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.256625] [drm:drm_mode_debug_printmodeline] Modeline 21:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa [ 1.256626] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] [ 1.256628] [drm:intel_dp_detect] [CONNECTOR:28:DP-1] [ 1.256632] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] disconnected [ 1.256634] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] [ 1.256635] [drm:intel_hdmi_detect] [CONNECTOR:32:HDMI-A-1] [ 1.256792] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 1.256794] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 1.256796] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] disconnected [ 1.256797] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] [ 1.256798] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-2] [ 1.256957] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 1.256958] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 1.256960] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] disconnected [ 1.256961] [drm:drm_setup_crtcs] [ 1.256963] [drm:drm_enable_connectors] connector 19 enabled? yes [ 1.256964] [drm:drm_enable_connectors] connector 28 enabled? no [ 1.256966] [drm:drm_enable_connectors] connector 32 enabled? no [ 1.256967] [drm:drm_enable_connectors] connector 35 enabled? no [ 1.256969] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 1.256970] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 [ 1.256972] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:8]: 1920x1080 [ 1.256974] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 1.256975] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 1.256976] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 1.256978] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 8 [ 1.256980] [drm:intelfb_create] no BIOS fb, allocating a new one [ 1.256982] [drm:i915_gem_object_create_stolen] creating stolen object: size=7e9000 [ 1.256988] [drm:i915_pages_create_for_stolen] offset=0x7e9000, size=8294400 [ 1.257808] [drm:intelfb_create] allocated 1920x1080 fb: 0x00881000, bo ffff880002aec000 [ 1.257873] fbcon: inteldrmfb (fb0) is primary device [ 1.257948] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0) [ 1.257949] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set [ 1.257951] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.257953] [drm:drm_mode_debug_printmodeline] Modeline 37:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.257954] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=1, fb_changed=1 [ 1.257956] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 1.257958] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 1.257960] [drm:connected_sink_compute_bpp] [CONNECTOR:19:eDP-1] checking for sink bpp constrains [ 1.257962] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 1.257967] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 1.257968] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 1.257970] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 1.257971] [drm:intel_dump_pipe_config] [CRTC:8][modeset] config for pipe A [ 1.257972] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 1.257972] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.257974] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.257975] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 1.257977] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.257977] [drm:intel_dump_pipe_config] requested mode: [ 1.257979] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.257980] [drm:intel_dump_pipe_config] adjusted mode: [ 1.257982] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.257985] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 1.257986] [drm:intel_dump_pipe_config] port clock: 270000 [ 1.257987] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 1.257988] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.257990] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.257990] [drm:intel_dump_pipe_config] ips: 1 [ 1.257992] [drm:intel_dump_pipe_config] double wide: 0 [ 1.258005] [drm:intel_edp_backlight_off] [ 1.265371] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.265457] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 1.265579] [drm] Initialized i915 1.6.0 20140905 for 0000:00:02.0 on minor 0 [ 1.348130] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 1.458169] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 1.464338] [drm:intel_edp_panel_off] Turn eDP power off [ 1.464341] [drm:wait_panel_off] Wait for panel power off time [ 1.464345] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 1.516413] usb 1-1: New USB device found, idVendor=07a6, idProduct=8515 [ 1.516415] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.516416] usb 1-1: Product: USB To LAN Converter [ 1.516417] usb 1-1: Manufacturer: ADMtek [ 1.516418] usb 1-1: SerialNumber: 0001 [ 1.517236] pegasus 1-1:1.0: setup Pegasus II specific registers [ 1.520183] [drm:wait_panel_status] Wait complete [ 1.520188] [drm:intel_update_fbc] no output, disabling [ 1.520192] [drm:intel_display_power_put] disabling display [ 1.520193] [drm:hsw_set_power_well] Requesting to disable the power well [ 1.520207] [drm:intel_edp_panel_on] Turn eDP power on [ 1.520210] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 1.618339] pegasus 1-1:1.0: eth1, ADMtek ADM8515 "Pegasus II" USB-2.0 Ethernet, 00:00:e8:00:05:c8 [ 1.798347] tsc: Refined TSC clocksource calibration: 2095.152 MHz [ 2.065488] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000 [ 2.065489] [drm:wait_panel_status] Wait complete [ 2.065492] [drm:wait_panel_on] Wait for panel power on [ 2.065495] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003 [ 2.274591] [drm:wait_panel_status] Wait complete [ 2.274598] [drm:edp_panel_vdd_on] Turning eDP VDD on [ 2.274604] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 2.275683] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 2.276140] [drm:intel_dp_start_link_train] clock recovery OK [ 2.276898] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful [ 2.277138] [drm:intel_edp_backlight_on] [ 2.277140] [drm:intel_panel_enable_backlight] pipe A [ 2.277144] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 2.277149] [drm:intel_edp_psr_enable] PSR not supported by this panel [ 2.277155] [drm:ironlake_update_primary_plane] Writing base 00881000 00000000 0 0 7680 [ 2.312610] [drm:intel_update_fbc] disabled per chip default [ 2.312614] [drm:intel_connector_check_state] [CONNECTOR:19:eDP-1] [ 2.312617] [drm:check_encoder_state] [ENCODER:18:TMDS-18] [ 2.312618] [drm:check_encoder_state] [ENCODER:27:TMDS-27] [ 2.312619] [drm:check_encoder_state] [ENCODER:29:DP MST-29] [ 2.312620] [drm:check_encoder_state] [ENCODER:30:DP MST-30] [ 2.312621] [drm:check_encoder_state] [ENCODER:31:DP MST-31] [ 2.312621] [drm:check_encoder_state] [ENCODER:34:TMDS-34] [ 2.312623] [drm:check_crtc_state] [CRTC:8] [ 2.312628] [drm:check_crtc_state] [CRTC:12] [ 2.312629] [drm:check_crtc_state] [CRTC:16] [ 2.312630] [drm:check_shared_dpll_state] WRPLL 1 [ 2.312631] [drm:check_shared_dpll_state] WRPLL 2 [ 2.312644] [drm:intel_crtc_set_config] [CRTC:12] [NOFB] [ 2.312646] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0 [ 2.312647] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 2.312649] [drm:intel_crtc_set_config] [CRTC:16] [NOFB] [ 2.312650] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=0, fb_changed=0 [ 2.312651] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 2.312657] Console: switching to colour frame buffer device 240x67 [ 2.312664] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0) [ 2.312666] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 2.312667] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 2.321056] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.321095] i915 0000:00:02.0: registered panic notifier [ 2.324738] dracut: Starting plymouth daemon [ 2.331381] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0) [ 2.331384] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 2.331385] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 2.345370] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0) [ 2.345374] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 2.345375] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 2.411965] EXT4-fs (sda2): INFO: recovery required on readonly filesystem [ 2.412013] EXT4-fs (sda2): write access will be enabled during recovery [ 2.440548] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 2.440731] ACPI: AC Adapter [ADP1] (on-line) [ 2.457196] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 2.457298] ACPI: Battery Slot [BAT0] (battery present) [ 2.457410] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 2.457508] ACPI: Battery Slot [BAT1] (battery absent) [ 2.457684] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 2.457781] ACPI: Battery Slot [BAT2] (battery absent) [ 2.468831] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 2.469024] [drm:intel_display_power_get] enabling display [ 2.469030] [drm:hsw_set_power_well] Enabling power well [ 2.469068] snd_hda_intel 0000:00:03.0: irq 44 for MSI/MSI-X [ 2.471422] EXT4-fs (sda2): recovery complete [ 2.471730] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 2.471734] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003) [ 2.471859] ACPI Warning: SystemIO range 0x000000000000efa0-0x000000000000efbf conflicts with OpRegion 0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI) (20140724/utaddress-258) [ 2.472017] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.474232] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 2.483902] random: nonblocking pool is initialized [ 2.493345] iTCO_vendor_support: vendor-support=0 [ 2.493564] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 2.493653] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860) [ 2.493876] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 2.494322] ppdev: user-space parallel port driver [ 2.498612] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0) [ 2.498616] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 2.498618] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 2.513279] dracut: Checking ext4: /dev/sda2 [ 2.513440] dracut: issuing e2fsck -a /dev/sda2 [ 2.525135] dracut: /dev/sda2: clean, 1005134/13598720 files, 28546922/54372608 blocks [ 2.527787] dracut: Remounting /dev/sda2 with -o errors=remount-ro,ro [ 2.540271] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 2.545828] dracut: Mounted root filesystem /dev/sda2 [ 2.557340] device-mapper: uevent: version 1.0.3 [ 2.559724] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 2.604900] dracut: Switching root [ 2.665986] init: ureadahead main process (2721) terminated with status 5 [ 2.746863] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 2.798902] Switched to clocksource tsc [ 3.809658] systemd-udevd[2838]: starting version 204 [ 3.901497] e1000e 0000:00:19.0 eth3: renamed from eth0 [ 3.912248] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0) [ 3.912253] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 3.912255] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 3.927730] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory [ 3.930496] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory [ 3.961696] [drm:i915_gem_open] [ 3.961730] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0) [ 3.961735] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 3.961739] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 3.961743] [drm:intel_crtc_set_config] [CRTC:12] [NOFB] [ 3.961746] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0 [ 3.961748] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 3.961751] [drm:intel_crtc_set_config] [CRTC:16] [NOFB] [ 3.961753] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=0, fb_changed=0 [ 3.961756] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 3.961781] [drm:i915_gem_open] [ 3.961831] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 3.961836] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 3.961846] [drm:drm_mode_getconnector] [CONNECTOR:19:?] [ 3.961850] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:eDP-1] [ 3.961852] [drm:intel_dp_detect] [CONNECTOR:19:eDP-1] [ 3.961866] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 3.961871] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:eDP-1] probed modes : [ 3.961876] [drm:drm_mode_debug_printmodeline] Modeline 20:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 3.961880] [drm:drm_mode_debug_printmodeline] Modeline 21:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa [ 3.961884] [drm:drm_mode_getconnector] [CONNECTOR:19:?] [ 3.971772] [drm:drm_mode_getconnector] [CONNECTOR:28:?] [ 3.971779] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] [ 3.971781] [drm:intel_dp_detect] [CONNECTOR:28:DP-1] [ 3.971790] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] disconnected [ 3.971796] [drm:drm_mode_getconnector] [CONNECTOR:28:?] [ 3.971798] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] [ 3.971800] [drm:intel_dp_detect] [CONNECTOR:28:DP-1] [ 3.971805] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:DP-1] disconnected [ 3.971811] [drm:drm_mode_getconnector] [CONNECTOR:32:?] [ 3.971814] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] [ 3.971816] [drm:intel_hdmi_detect] [CONNECTOR:32:HDMI-A-1] [ 3.972495] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 3.972500] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 3.972505] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] disconnected [ 3.972513] [drm:drm_mode_getconnector] [CONNECTOR:32:?] [ 3.972516] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] [ 3.972518] [drm:intel_hdmi_detect] [CONNECTOR:32:HDMI-A-1] [ 3.972680] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 3.972683] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 3.972687] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] disconnected [ 3.972696] [drm:drm_mode_getconnector] [CONNECTOR:35:?] [ 3.972699] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] [ 3.972701] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-2] [ 3.973287] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 3.973291] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 3.973295] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] disconnected [ 3.973301] [drm:drm_mode_getconnector] [CONNECTOR:35:?] [ 3.973304] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] [ 3.973306] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-2] [ 3.973456] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 3.973459] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 3.973462] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] disconnected [ 3.973486] [drm:drm_mode_addfb] [FB:36] [ 3.975364] pegasus 1-1:1.0 eth6: renamed from eth1 [ 4.045861] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory [ 4.048735] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory [ 4.065343] Adding 16440316k swap on /dev/sda3. Priority:-1 extents:1 across:16440316k SS [ 4.069900] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory [ 4.072289] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory [ 4.090960] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 4.169871] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory [ 4.172844] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory [ 4.229178] init: failsafe main process (3761) killed by TERM signal [ 4.231593] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 4.231603] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 4.242889] init: Failed to spawn bluetooth main process: unable to execute: No such file or directory [ 4.254399] init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory [ 4.260765] init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory [ 4.395203] init: avahi-cups-reload main process (3918) terminated with status 1 [ 4.580899] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X [ 4.681850] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X [ 5.113842] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0) [ 5.113848] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 5.113850] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 5.113853] [drm:intel_crtc_set_config] [CRTC:12] [NOFB] [ 5.113855] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0 [ 5.113857] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 5.113858] [drm:intel_crtc_set_config] [CRTC:16] [NOFB] [ 5.113860] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=0, fb_changed=0 [ 5.113862] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 5.113888] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0) [ 5.113889] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 5.113890] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 61.635894] pm_rps: executing [ 61.635974] [drm:i915_gem_open] [ 61.636001] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0) [ 61.636009] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 61.636011] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 61.636014] [drm:intel_crtc_set_config] [CRTC:12] [NOFB] [ 61.636016] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0 [ 61.636018] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 61.636019] [drm:intel_crtc_set_config] [CRTC:16] [NOFB] [ 61.636021] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=0, fb_changed=0 [ 61.636023] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 61.636032] [drm:i915_gem_open] [ 61.636251] [drm:i915_gem_open] [ 61.636457] pm_rps: starting subtest reset [ 81.653385] [drm:i915_ring_stop_set] Stopping rings 0x400000ff [ 88.779302] [drm] stuck on render ring [ 88.780487] [drm] GPU HANG: ecode 0:0xeed7efe7, in pm_rps [4529], reason: Ring hung, action: reset [ 88.780489] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace. [ 88.780490] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel [ 88.780491] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue. [ 88.780492] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it. [ 88.780493] [drm] GPU crash dump saved to /sys/class/drm/card0/error [ 88.780567] [drm:i915_error_work_func] resetting chip [ 88.782262] [drm] Simulated gpu hang, resetting stop_rings [ 88.782269] [drm:init_status_page] render ring hws offset: 0x007fb000 [ 88.782293] [drm:init_status_page] bsd ring hws offset: 0x0081d000 [ 88.782303] [drm:init_status_page] blitter ring hws offset: 0x0083e000 [ 88.782311] [drm:init_status_page] video enhancement ring hws offset: 0x0085f000 [ 88.782331] [drm:ironlake_update_primary_plane] Writing base 00881000 00000000 0 0 7680 [ 88.861191] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 110.709263] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0) [ 110.709269] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 110.709271] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 110.709274] [drm:intel_crtc_set_config] [CRTC:12] [NOFB] [ 110.709276] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0 [ 110.709278] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 110.709279] [drm:intel_crtc_set_config] [CRTC:16] [NOFB] [ 110.709281] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=0, fb_changed=0 [ 110.709283] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 126.120354] pm_rps: executing [ 126.120415] [drm:i915_gem_open] [ 126.120443] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0) [ 126.120447] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 126.120449] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 126.120451] [drm:intel_crtc_set_config] [CRTC:12] [NOFB] [ 126.120453] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0 [ 126.120455] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 126.120456] [drm:intel_crtc_set_config] [CRTC:16] [NOFB] [ 126.120458] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=0, fb_changed=0 [ 126.120460] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 126.120469] [drm:i915_gem_open] [ 126.120654] [drm:i915_gem_open] [ 126.120790] pm_rps: starting subtest blocking [ 126.120802] [drm:i915_gem_open] [ 171.164579] [drm:intel_crtc_set_config] [CRTC:8] [FB:38] #connectors=1 (x y) (0 0) [ 171.164585] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 171.164587] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 171.164590] [drm:intel_crtc_set_config] [CRTC:12] [NOFB] [ 171.164592] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0 [ 171.164594] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8] [ 171.164596] [drm:intel_crtc_set_config] [CRTC:16] [NOFB] [ 171.164597] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=0, fb_changed=0 [ 171.164599] [drm:intel_modeset_stage_output_state] [CONNECTOR:19:eDP-1] to [CRTC:8]