Attachment 106755 Details for Bug 84255 – Dmesg output

Dmesg output

dmesg.log (text/plain), 50.69 KB, created by Richard Van Den Boom on 2014-09-23 17:55:01 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Richard Van Den Boom

Created: 2014-09-23 17:55:01 UTC

Size: 50.69 KB

patch

obsolete

>Initializing cgroup subsys cpu
>Linux version 3.16.3-vdb (root@coyote) (gcc version 4.8.3 (GCC) ) #1 SMP PREEMPT Thu Sep 18 07:52:07 CEST 2014
>Command line: BOOT_IMAGE=/boot/3.16.3-vdb root=/dev/sda1 ro resume=/dev/sda2 radeon.dpm=1
>e820: BIOS-provided physical RAM map:
>BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
>BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
>BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
>BIOS-e820: [mem 0x0000000000100000-0x000000007ced9fff] usable
>BIOS-e820: [mem 0x000000007ceda000-0x000000007cf09fff] reserved
>BIOS-e820: [mem 0x000000007cf0a000-0x000000007d1c5fff] usable
>BIOS-e820: [mem 0x000000007d1c6000-0x000000007d282fff] ACPI NVS
>BIOS-e820: [mem 0x000000007d283000-0x000000007e23dfff] reserved
>BIOS-e820: [mem 0x000000007e23e000-0x000000007e23efff] usable
>BIOS-e820: [mem 0x000000007e23f000-0x000000007e444fff] ACPI NVS
>BIOS-e820: [mem 0x000000007e445000-0x000000007e881fff] usable
>BIOS-e820: [mem 0x000000007e882000-0x000000007eff2fff] reserved
>BIOS-e820: [mem 0x000000007eff3000-0x000000007effffff] usable
>BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
>BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
>BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
>BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
>BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
>BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
>BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
>NX (Execute Disable) protection: active
>SMBIOS 2.8 present.
>DMI: MSI MS-7721/A88XM-E35 (MS-7721), BIOS V30.0 10/25/2013
>e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>e820: remove [mem 0x000a0000-0x000fffff] usable
>AGP: No AGP bridge found
>e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF write-through
>  C0000-CFFFF write-protect
>  D0000-E7FFF uncachable
>  E8000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000000 mask FFFF80000000 write-back
>  1 disabled
>  2 disabled
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>TOM2: 0000000240000000 aka 9216M
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>e820: update [mem 0x80000000-0xffffffff] usable ==> reserved
>e820: last_pfn = 0x7f000 max_arch_pfn = 0x400000000
>found SMP MP-table at [mem 0x000fd830-0x000fd83f] mapped at [ffff8800000fd830]
>Scanning 1 areas for low memory corruption
>Base memory trampoline at [ffff880000098000] 98000 size 24576
>Using GB pages for direct mapping
>init_memory_mapping: [mem 0x00000000-0x000fffff]
> [mem 0x00000000-0x000fffff] page 4k
>BRK [0x02610000, 0x02610fff] PGTABLE
>BRK [0x02611000, 0x02611fff] PGTABLE
>BRK [0x02612000, 0x02612fff] PGTABLE
>init_memory_mapping: [mem 0x23fe00000-0x23fffffff]
> [mem 0x23fe00000-0x23fffffff] page 1G
>init_memory_mapping: [mem 0x23c000000-0x23fdfffff]
> [mem 0x23c000000-0x23fdfffff] page 1G
>init_memory_mapping: [mem 0x200000000-0x23bffffff]
> [mem 0x200000000-0x23bffffff] page 1G
>init_memory_mapping: [mem 0x00100000-0x7ced9fff]
> [mem 0x00100000-0x001fffff] page 4k
> [mem 0x00200000-0x7cdfffff] page 2M
> [mem 0x7ce00000-0x7ced9fff] page 4k
>init_memory_mapping: [mem 0x7cf0a000-0x7d1c5fff]
> [mem 0x7cf0a000-0x7d1c5fff] page 4k
>BRK [0x02613000, 0x02613fff] PGTABLE
>init_memory_mapping: [mem 0x7e23e000-0x7e23efff]
> [mem 0x7e23e000-0x7e23efff] page 4k
>BRK [0x02614000, 0x02614fff] PGTABLE
>init_memory_mapping: [mem 0x7e445000-0x7e881fff]
> [mem 0x7e445000-0x7e5fffff] page 4k
> [mem 0x7e600000-0x7e7fffff] page 2M
> [mem 0x7e800000-0x7e881fff] page 4k
>BRK [0x02615000, 0x02615fff] PGTABLE
>init_memory_mapping: [mem 0x7eff3000-0x7effffff]
> [mem 0x7eff3000-0x7effffff] page 4k
>init_memory_mapping: [mem 0x100000000-0x1ffffffff]
> [mem 0x100000000-0x1ffffffff] page 1G
>ACPI: Early table checksum verification disabled
>ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
>ACPI: XSDT 0x000000007D24A080 00007C (v01 ALASKA A M I    01072009 AMI  00010013)
>ACPI: FACP 0x000000007D250578 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
>ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20140424/tbfadt-649)
>ACPI: DSDT 0x000000007D24A190 0063E1 (v02 ALASKA A M I    00000000 INTL 20051117)
>ACPI: FACS 0x000000007D279D80 000040
>ACPI: APIC 0x000000007D250688 00007E (v03 ALASKA A M I    01072009 AMI  00010013)
>ACPI: FPDT 0x000000007D250708 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
>ACPI: MCFG 0x000000007D250750 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
>ACPI: HPET 0x000000007D250790 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
>ACPI: IVRS 0x000000007D2507C8 000078 (v02 AMD    BANTRY   00000001 AMD  00000000)
>ACPI: SSDT 0x000000007D250840 000A60 (v01 AMD    BANTRY   00000001 AMD  00000001)
>ACPI: SSDT 0x000000007D2512A0 00033B (v02 AMD    BANTRY   00000002 MSFT 04000000)
>ACPI: CRAT 0x000000007D2515E0 000550 (v01 AMD    BANTRY   00000001 AMD  00000001)
>ACPI: SSDT 0x000000007D251B30 00144B (v01 AMD    CPMDFIGP 00000001 INTL 20051117)
>ACPI: SSDT 0x000000007D252F80 001208 (v01 AMD    CPMCMN   00000001 INTL 20051117)
>ACPI: Local APIC address 0xfee00000
>No NUMA configuration found
>Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
>Initmem setup node 0 [mem 0x00000000-0x23fffffff]
>  NODE_DATA [mem 0x23fff8000-0x23fffbfff]
> [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880238600000-ffff88023f5fffff] on node 0
>Zone ranges:
>  DMA      [mem 0x00001000-0x00ffffff]
>  DMA32    [mem 0x01000000-0xffffffff]
>  Normal   [mem 0x100000000-0x23fffffff]
>Movable zone start for each node
>Early memory node ranges
>  node   0: [mem 0x00001000-0x0009dfff]
>  node   0: [mem 0x00100000-0x7ced9fff]
>  node   0: [mem 0x7cf0a000-0x7d1c5fff]
>  node   0: [mem 0x7e23e000-0x7e23efff]
>  node   0: [mem 0x7e445000-0x7e881fff]
>  node   0: [mem 0x7eff3000-0x7effffff]
>  node   0: [mem 0x100000000-0x23fffffff]
>On node 0 totalpages: 1824126
>  DMA zone: 64 pages used for memmap
>  DMA zone: 21 pages reserved
>  DMA zone: 3997 pages, LIFO batch:0
>  DMA32 zone: 7960 pages used for memmap
>  DMA32 zone: 509409 pages, LIFO batch:31
>  Normal zone: 20480 pages used for memmap
>  Normal zone: 1310720 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
>ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
>ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x01] address[0xfec01000] gsi_base[24])
>IOAPIC[1]: apic_id 1, version 33, address 0xfec01000, GSI 24-55
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x10228210 base: 0xfed00000
>smpboot: Allowing 4 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 72
>PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
>PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
>PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
>PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
>PM: Registered nosave memory: [mem 0x7ceda000-0x7cf09fff]
>PM: Registered nosave memory: [mem 0x7d1c6000-0x7d282fff]
>PM: Registered nosave memory: [mem 0x7d283000-0x7e23dfff]
>PM: Registered nosave memory: [mem 0x7e23f000-0x7e444fff]
>PM: Registered nosave memory: [mem 0x7e882000-0x7eff2fff]
>PM: Registered nosave memory: [mem 0x7f000000-0xfebfffff]
>PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
>PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
>PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
>PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
>PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
>PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
>PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
>PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
>PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
>PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
>PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
>e820: [mem 0x7f000000-0xfebfffff] available for PCI devices
>setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
>PERCPU: Embedded 27 pages/cpu @ffff88023fc00000 s80640 r8192 d21760 u524288
>pcpu-alloc: s80640 r8192 d21760 u524288 alloc=1*2097152
>pcpu-alloc: [0] 0 1 2 3 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1795601
>Policy zone: Normal
>Kernel command line: BOOT_IMAGE=/boot/3.16.3-vdb root=/dev/sda1 ro resume=/dev/sda2 radeon.dpm=1
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>xsave: enabled xstate_bv 0x7, cntxt size 0x340
>AGP: Checking aperture...
>AGP: No AGP bridge found
>AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
>AGP: Your BIOS doesn't leave a aperture memory hole
>AGP: Please enable the IOMMU option in the BIOS setup
>AGP: This costs you 64MB of RAM
>AGP: Mapping aperture over RAM [mem 0x74000000-0x77ffffff] (65536KB)
>PM: Registered nosave memory: [mem 0x74000000-0x77ffffff]
>Memory: 7026908K/7296504K available (12418K kernel code, 1326K rwdata, 6876K rodata, 1112K init, 800K bss, 269596K reserved)
>SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>Preemptible hierarchical RCU implementation.
>	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
>RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
>NR_IRQS:4352 nr_irqs:1024 16
>spurious 8259A interrupt: IRQ7.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>hpet clockevent registered
>tsc: Fast TSC calibration using PIT
>tsc: Detected 3393.685 MHz processor
>Calibrating delay loop (skipped), value calculated using timer frequency.. 6787.37 BogoMIPS (lpj=3393685)
>pid_max: default: 32768 minimum: 301
>ACPI: Core revision 20140424
>ACPI: All ACPI Tables successfully acquired
>Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
>Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
>Initializing cgroup subsys blkio
>tseg: 007f000000
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 7 MCE banks
>LVT offset 1 assigned for vector 0xf9
>Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
>Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
>tlb_flushall_shift: 6
>Freeing SMP alternatives memory: 32K (ffffffff8253e000 - ffffffff82546000)
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>smpboot: CPU0: AMD A10-7700K APU with Radeon(TM) R7 Graphics (fam: 15, model: 30, stepping: 01)
>Performance Events: Fam15h core perfctr, AMD PMU driver.
>... version:                0
>... bit width:              48
>... generic registers:      6
>... value mask:             0000ffffffffffff
>... max period:             00007fffffffffff
>... fixed-purpose events:   0
>... event mask:             000000000000003f
>MCE: In-kernel MCE decoding enabled.
>x86: Booting SMP configuration:
>.... node  #0, CPUs:      #1 #2 #3
>x86: Booted up 1 node, 4 CPUs
>smpboot: Total of 4 processors activated (27149.48 BogoMIPS)
>devtmpfs: initialized
>PM: Registering ACPI NVS region [mem 0x7d1c6000-0x7d282fff] (774144 bytes)
>PM: Registering ACPI NVS region [mem 0x7e23f000-0x7e444fff] (2121728 bytes)
>xor: automatically using best checksumming function:
>   avx       : 11052.000 MB/sec
>regulator-dummy: no parameters
>RTC time: 21:06:08, date: 09/21/14
>NET: Registered protocol family 16
>cpuidle: using governor ladder
>cpuidle: using governor menu
>ACPI: bus type PCI registered
>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: not using MMCONFIG
>PCI: Using configuration type 1 for base access
>PCI: Using configuration type 1 for extended access
>mtrr: your CPUs had inconsistent variable MTRR settings
>mtrr: probably your BIOS does not setup all CPUs.
>mtrr: corrected configuration.
>raid6: sse2x1    6992 MB/s
>raid6: sse2x2   10710 MB/s
>raid6: sse2x4   12113 MB/s
>raid6: using algorithm sse2x4 (12113 MB/s)
>raid6: using ssse3x2 recovery algorithm
>ACPI: Added _OSI(Module Device)
>ACPI: Added _OSI(Processor Device)
>ACPI: Added _OSI(3.0 _SCP Extensions)
>ACPI: Added _OSI(Processor Aggregator Device)
>ACPI: Executed 1 blocks of module-level executable AML code
>ACPI: Interpreter enabled
>ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
>ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
>[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>acpi PNP0A03:00: _OSC: platform does not support [PCIeCapability]
>acpi PNP0A03:00: _OSC: not requesting control; platform does not support [PCIeCapability]
>acpi PNP0A03:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
>acpi PNP0A03:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
>acpi PNP0A03:00: _OSC failed (AE_SUPPORT); disabling ASPM
>PCI host bridge to bus 0000:00
>pci_bus 0000:00: root bus resource [bus 00-ff]
>pci_bus 0000:00: root bus resource [io  0x0000-0x03af]
>pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7]
>pci_bus 0000:00: root bus resource [io  0x03b0-0x03df]
>pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
>pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
>pci 0000:00:00.0: [1022:1422] type 00 class 0x060000
>pci 0000:00:00.2: [1022:1423] type 00 class 0x080600
>pci 0000:00:01.0: [1002:1313] type 00 class 0x030000
>pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
>pci 0000:00:01.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref]
>pci 0000:00:01.0: reg 0x20: [io  0xf000-0xf0ff]
>pci 0000:00:01.0: reg 0x24: [mem 0xfeb00000-0xfeb3ffff]
>pci 0000:00:01.0: reg 0x30: [mem 0xfeb40000-0xfeb5ffff pref]
>pci 0000:00:01.0: supports D1 D2
>pci 0000:00:01.0: PME# supported from D1 D2 D3hot
>pci 0000:00:01.1: [1002:1308] type 00 class 0x040300
>pci 0000:00:01.1: reg 0x10: [mem 0xfeb64000-0xfeb67fff 64bit]
>pci 0000:00:01.1: supports D1 D2
>pci 0000:00:02.0: [1022:1424] type 00 class 0x060000
>pci 0000:00:03.0: [1022:1424] type 00 class 0x060000
>pci 0000:00:03.1: [1022:1426] type 01 class 0x060400
>pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:03.1: System wakeup disabled by ACPI
>pci 0000:00:04.0: [1022:1424] type 00 class 0x060000
>pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
>pci 0000:00:10.0: reg 0x10: [mem 0xfeb6a000-0xfeb6bfff 64bit]
>pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:10.0: System wakeup disabled by ACPI
>pci 0000:00:10.1: [1022:7814] type 00 class 0x0c0330
>pci 0000:00:10.1: reg 0x10: [mem 0xfeb68000-0xfeb69fff 64bit]
>pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:10.1: System wakeup disabled by ACPI
>pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
>pci 0000:00:11.0: reg 0x10: [io  0xf140-0xf147]
>pci 0000:00:11.0: reg 0x14: [io  0xf130-0xf133]
>pci 0000:00:11.0: reg 0x18: [io  0xf120-0xf127]
>pci 0000:00:11.0: reg 0x1c: [io  0xf110-0xf113]
>pci 0000:00:11.0: reg 0x20: [io  0xf100-0xf10f]
>pci 0000:00:11.0: reg 0x24: [mem 0xfeb71000-0xfeb717ff]
>pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
>pci 0000:00:12.0: reg 0x10: [mem 0xfeb70000-0xfeb70fff]
>pci 0000:00:12.0: System wakeup disabled by ACPI
>pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
>pci 0000:00:12.2: reg 0x10: [mem 0xfeb6f000-0xfeb6f0ff]
>pci 0000:00:12.2: supports D1 D2
>pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:12.2: System wakeup disabled by ACPI
>pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
>pci 0000:00:13.0: reg 0x10: [mem 0xfeb6e000-0xfeb6efff]
>pci 0000:00:13.0: System wakeup disabled by ACPI
>pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
>pci 0000:00:13.2: reg 0x10: [mem 0xfeb6d000-0xfeb6d0ff]
>pci 0000:00:13.2: supports D1 D2
>pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:13.2: System wakeup disabled by ACPI
>pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
>pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
>pci 0000:00:14.2: reg 0x10: [mem 0xfeb60000-0xfeb63fff 64bit]
>pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:14.2: System wakeup disabled by ACPI
>pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
>pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
>pci 0000:00:14.4: System wakeup disabled by ACPI
>pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
>pci 0000:00:14.5: reg 0x10: [mem 0xfeb6c000-0xfeb6cfff]
>pci 0000:00:14.5: System wakeup disabled by ACPI
>pci 0000:00:18.0: [1022:141a] type 00 class 0x060000
>pci 0000:00:18.1: [1022:141b] type 00 class 0x060000
>pci 0000:00:18.2: [1022:141c] type 00 class 0x060000
>pci 0000:00:18.3: [1022:141d] type 00 class 0x060000
>pci 0000:00:18.4: [1022:141e] type 00 class 0x060000
>pci 0000:00:18.5: [1022:141f] type 00 class 0x060000
>pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
>pci 0000:01:00.0: reg 0x10: [io  0xe000-0xe0ff]
>pci 0000:01:00.0: reg 0x18: [mem 0xfea00000-0xfea00fff 64bit]
>pci 0000:01:00.0: reg 0x20: [mem 0xd0800000-0xd0803fff 64bit pref]
>pci 0000:01:00.0: supports D1 D2
>pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:03.1: PCI bridge to [bus 01]
>pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
>pci 0000:00:03.1:   bridge window [mem 0xfea00000-0xfeafffff]
>pci 0000:00:03.1:   bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
>pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
>pci 0000:00:14.4:   bridge window [io  0x0000-0x03af] (subtractive decode)
>pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7] (subtractive decode)
>pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df] (subtractive decode)
>pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
>pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
>ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *4 5 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 4 *5 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
>ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
>ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
>ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
>vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>vgaarb: bridge control possible 0000:00:01.0
>SCSI subsystem initialized
>libata version 3.00 loaded.
>ACPI: bus type USB registered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>media: Linux media interface: v0.10
>Linux video capture interface: v2.00
>pps_core: LinuxPPS API ver. 1 registered
>pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>PTP clock support registered
>Advanced Linux Sound Architecture Driver Initialized.
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
>e820: reserve RAM buffer [mem 0x7ceda000-0x7fffffff]
>e820: reserve RAM buffer [mem 0x7d1c6000-0x7fffffff]
>e820: reserve RAM buffer [mem 0x7e23f000-0x7fffffff]
>e820: reserve RAM buffer [mem 0x7e882000-0x7fffffff]
>e820: reserve RAM buffer [mem 0x7f000000-0x7fffffff]
>cfg80211: Calling CRDA to update world regulatory domain
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 32-bit 14.318180 MHz counter
>Switched to clocksource hpet
>FS-Cache: Loaded
>pnp: PnP ACPI init
>ACPI: bus type PNP registered
>system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
>system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
>system 00:01: [mem 0x80000000-0xbfffffff] has been reserved
>system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>system 00:02: [mem 0xfeb80000-0xfebfffff] has been reserved
>system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
>system 00:03: [io  0x0295-0x0296] has been reserved
>system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
>system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
>system 00:06: [io  0x04d0-0x04d1] has been reserved
>system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
>system 00:07: [io  0x04d0-0x04d1] has been reserved
>system 00:07: [io  0x040b] has been reserved
>system 00:07: [io  0x04d6] has been reserved
>system 00:07: [io  0x0c00-0x0c01] has been reserved
>system 00:07: [io  0x0c14] has been reserved
>system 00:07: [io  0x0c50-0x0c51] has been reserved
>system 00:07: [io  0x0c52] has been reserved
>system 00:07: [io  0x0c6c] has been reserved
>system 00:07: [io  0x0c6f] has been reserved
>system 00:07: [io  0x0cd0-0x0cd1] has been reserved
>system 00:07: [io  0x0cd2-0x0cd3] has been reserved
>system 00:07: [io  0x0cd4-0x0cd5] has been reserved
>system 00:07: [io  0x0cd6-0x0cd7] has been reserved
>system 00:07: [io  0x0cd8-0x0cdf] has been reserved
>system 00:07: [io  0x0800-0x089f] could not be reserved
>system 00:07: [io  0x0b20-0x0b3f] has been reserved
>system 00:07: [io  0x0900-0x090f] has been reserved
>system 00:07: [io  0x0910-0x091f] has been reserved
>system 00:07: [io  0xfe00-0xfefe] has been reserved
>system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
>system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
>system 00:07: [mem 0xfed80000-0xfed8ffff] has been reserved
>system 00:07: [mem 0xfed61000-0xfed70fff] has been reserved
>system 00:07: [mem 0xfec10000-0xfec10fff] has been reserved
>system 00:07: [mem 0xfed00000-0xfed00fff] could not be reserved
>system 00:07: [mem 0xff000000-0xffffffff] has been reserved
>system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp: PnP ACPI: found 8 devices
>ACPI: bus type PNP unregistered
>pci 0000:00:03.1: PCI bridge to [bus 01]
>pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
>pci 0000:00:03.1:   bridge window [mem 0xfea00000-0xfeafffff]
>pci 0000:00:03.1:   bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
>pci 0000:00:14.4: PCI bridge to [bus 02]
>pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
>pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
>pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
>pci_bus 0000:00: resource 7 [io  0x0d00-0xffff]
>pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
>pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
>pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
>pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
>pci_bus 0000:01: resource 2 [mem 0xd0800000-0xd08fffff 64bit pref]
>pci_bus 0000:02: resource 4 [io  0x0000-0x03af]
>pci_bus 0000:02: resource 5 [io  0x03e0-0x0cf7]
>pci_bus 0000:02: resource 6 [io  0x03b0-0x03df]
>pci_bus 0000:02: resource 7 [io  0x0d00-0xffff]
>pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff]
>pci_bus 0000:02: resource 10 [mem 0xc0000000-0xffffffff]
>NET: Registered protocol family 2
>TCP established hash table entries: 65536 (order: 7, 524288 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 65536 bind 65536)
>TCP: reno registered
>UDP hash table entries: 4096 (order: 5, 131072 bytes)
>UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
>NET: Registered protocol family 1
>RPC: Registered named UNIX socket transport module.
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>pci 0000:00:01.0: Boot video device
>PCI: CLS 64 bytes, default 64
>AMD-Vi: IOMMU performance counters supported
>ERROR: Unable to locate IOAPIC for GSI 56
>No IOAPIC for GSI 56
>AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
>AMD-Vi:  Extended features:  PPR GT IA PC
>pci 0000:00:00.2: irq 72 for MSI/MSI-X
>AMD-Vi: Using passthrough domain for device 0000:00:01.0
>AMD-Vi: Lazy IO/TLB flushing enabled
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>software IO TLB [mem 0x78eda000-0x7ceda000] (64MB) mapped at [ffff880078eda000-ffff88007ced9fff]
>kvm: Nested Virtualization enabled
>kvm: Nested Paging enabled
>perf: AMD NB counters detected
>perf: amd_iommu: Detected. (2 banks, 4 counters/bank)
>microcode: CPU0: patch_level=0x06003103
>microcode: CPU1: patch_level=0x06003103
>microcode: CPU2: patch_level=0x06003103
>microcode: CPU3: patch_level=0x06003103
>microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>LVT offset 0 assigned for vector 0x400
>perf: AMD IBS detected (0x000001ff)
>Scanning for low memory corruption every 60 seconds
>sha1_ssse3: Using AVX optimized SHA-1 implementation
>futex hash table entries: 1024 (order: 4, 65536 bytes)
>audit: initializing netlink subsys (disabled)
>audit: type=2000 audit(1411333568.559:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>DLM installed
>NFS: Registering the id_resolver key type
>Key type id_resolver registered
>Key type id_legacy registered
>fuse init (API version 7.23)
>SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
>msgmni has been set to 13724
>bounce: pool size: 64 pages
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>ACPI: Power Button [PWRF]
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
>acpi device:02: registered as cooling_device0
>input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input2
>GHES: HEST is not enabled!
>ERST DBG: ERST support is disabled.
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>[drm] Initialized drm 1.1.0 20060810
>[drm] radeon kernel modesetting enabled.
>[drm] initializing kernel modesetting (KAVERI 0x1002:0x1313 0x1462:0x7721).
>[drm] register mmio base: 0xFEB00000
>[drm] register mmio size: 262144
>[drm] doorbell mmio base: 0xD0000000
>[drm] doorbell mmio size: 8388608
>ATOM BIOS: 113
>radeon 0000:00:01.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
>radeon 0000:00:01.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
>[drm] Detected VRAM RAM=1024M, BAR=256M
>[drm] RAM width 128bits DDR
>[TTM] Zone  kernel: Available graphics memory: 3513470 kiB
>[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
>[TTM] Initializing pool allocator
>[TTM] Initializing DMA pool allocator
>[drm] radeon: 1024M of VRAM memory ready
>[drm] radeon: 1024M of GTT memory ready.
>[drm] Loading KAVERI Microcode
>[drm] Internal thermal controller without fan control
>== power state 0 ==
>	ui class: battery
>	internal class: none
>	caps: 
>	uvd    vclk: 0 dclk: 0
>		power level 0    sclk: 35122 vddc: 3800
>		power level 1    sclk: 45000 vddc: 4200
>	status: 
>== power state 1 ==
>	ui class: performance
>	internal class: none
>	caps: 
>	uvd    vclk: 0 dclk: 0
>		power level 0    sclk: 35122 vddc: 3800
>		power level 1    sclk: 45000 vddc: 4200
>		power level 2    sclk: 55385 vddc: 4500
>		power level 3    sclk: 65455 vddc: 4750
>		power level 4    sclk: 72000 vddc: 4900
>	status: 
>== power state 2 ==
>	ui class: none
>	internal class: boot 
>	caps: 
>	uvd    vclk: 0 dclk: 0
>		power level 0    sclk: 20000 vddc: 6100
>	status: c r b 
>[drm] radeon: dpm initialized
>[drm] Found VCE firmware/feedback version 40.2.2 / 15!
>[drm] GART: num cpu pages 262144, num gpu pages 262144
>[drm] PCIE GART of 1024M enabled (table at 0x000000000078B000).
>radeon 0000:00:01.0: WB enabled
>radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880235dddc00
>radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff880235dddc04
>radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff880235dddc08
>radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880235dddc0c
>radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff880235dddc10
>radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc900110b6c98
>radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000040000c18 and cpu addr 0xffff880235dddc18
>radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c and cpu addr 0xffff880235dddc1c
>[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[drm] Driver supports precise vblank timestamp query.
>radeon 0000:00:01.0: irq 73 for MSI/MSI-X
>radeon 0000:00:01.0: radeon: using MSI.
>[drm] radeon: irq initialized.
>[drm] ring test on 0 succeeded in 3 usecs
>[drm] ring test on 1 succeeded in 2 usecs
>[drm] ring test on 2 succeeded in 2 usecs
>[drm] ring test on 3 succeeded in 2 usecs
>[drm] ring test on 4 succeeded in 2 usecs
>[drm] ring test on 5 succeeded in 1 usecs
>[drm] UVD initialized successfully.
>[drm] ring test on 6 succeeded in 15 usecs
>[drm] ring test on 7 succeeded in 3 usecs
>[drm] VCE initialized successfully.
>[drm] ib test on ring 0 succeeded in 0 usecs
>[drm] ib test on ring 1 succeeded in 0 usecs
>tsc: Refined TSC clocksource calibration: 3393.657 MHz
>[drm] ib test on ring 2 succeeded in 0 usecs
>[drm] ib test on ring 3 succeeded in 0 usecs
>[drm] ib test on ring 4 succeeded in 0 usecs
>[drm] ib test on ring 5 succeeded
>[drm] ib test on ring 6 succeeded
>[drm] ib test on ring 7 succeeded
>[drm] Radeon Display Connectors
>[drm] Connector 0:
>[drm]   DVI-D-1
>[drm]   HPD3
>[drm]   DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
>[drm]   Encoders:
>[drm]     DFP2: INTERNAL_UNIPHY2
>[drm] Connector 1:
>[drm]   HDMI-A-1
>[drm]   HPD1
>[drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
>[drm]   Encoders:
>[drm]     DFP1: INTERNAL_UNIPHY
>[drm] Connector 2:
>[drm]   VGA-1
>[drm]   HPD2
>[drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
>[drm]   Encoders:
>[drm]     CRT1: INTERNAL_UNIPHY3
>[drm]     CRT1: NUTMEG
>switching from power state:
>	ui class: none
>	internal class: boot 
>	caps: 
>	uvd    vclk: 0 dclk: 0
>		power level 0    sclk: 20000 vddc: 6100
>	status: c b 
>switching to power state:
>	ui class: performance
>	internal class: none
>	caps: 
>	uvd    vclk: 0 dclk: 0
>		power level 0    sclk: 35122 vddc: 3800
>		power level 1    sclk: 45000 vddc: 4200
>		power level 2    sclk: 55385 vddc: 4500
>		power level 3    sclk: 65455 vddc: 4750
>		power level 4    sclk: 72000 vddc: 4900
>	status: r 
>[drm] fb mappable at 0xC098F000
>[drm] vram apper at 0xC0000000
>[drm] size 8294400
>[drm] fb depth is 24
>[drm]    pitch is 7680
>fbcon: radeondrmfb (fb0) is primary device
>Console: switching to colour frame buffer device 240x67
>radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
>radeon 0000:00:01.0: registered panic notifier
>ACPI Error: [\_SB_.ALIB] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
>ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.ATC0] (Node ffff88023804cc30), AE_NOT_FOUND (20140424/psparse-536)
>ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.ATCS] (Node ffff88023804cc08), AE_NOT_FOUND (20140424/psparse-536)
>[drm] Initialized radeon 2.39.0 20080528 for 0000:00:01.0 on minor 0
>usbcore: registered new interface driver udl
>brd: module loaded
>loop: module loaded
>ahci 0000:00:11.0: version 3.0
>ahci 0000:00:11.0: irq 74 for MSI/MSI-X
>ahci 0000:00:11.0: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x33 impl SATA mode
>ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71100 irq 74
>ata2: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71180 irq 74
>ata3: DUMMY
>ata4: DUMMY
>ata5: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71300 irq 74
>ata6: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71380 irq 74
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
>e1000: Copyright (c) 1999-2006 Intel Corporation.
>sky2: driver version 1.30
>r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
>r8169 0000:01:00.0: irq 75 for MSI/MSI-X
>r8169 0000:01:00.0 eth0: RTL8168g/8111g at 0xffffc90010f72000, 44:8a:5b:24:59:89, XID 0c000800 IRQ 75
>r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci-pci: EHCI PCI platform driver
>QUIRK: Enable AMD PLL fix
>ehci-pci 0000:00:12.2: EHCI Host Controller
>ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
>ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
>ehci-pci 0000:00:12.2: debug port 1
>ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb6f000
>ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 3.16.3-vdb ehci_hcd
>usb usb1: SerialNumber: 0000:00:12.2
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 5 ports detected
>ehci-pci 0000:00:13.2: EHCI Host Controller
>ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
>ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
>ehci-pci 0000:00:13.2: debug port 1
>ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb6d000
>ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 3.16.3-vdb ehci_hcd
>usb usb2: SerialNumber: 0000:00:13.2
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 5 ports detected
>ehci-platform: EHCI generic platform driver
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci-pci: OHCI PCI platform driver
>ohci-pci 0000:00:12.0: OHCI PCI host controller
>ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
>ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb70000
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: OHCI PCI host controller
>usb usb3: Manufacturer: Linux 3.16.3-vdb ohci_hcd
>usb usb3: SerialNumber: 0000:00:12.0
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 5 ports detected
>ohci-pci 0000:00:13.0: OHCI PCI host controller
>ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
>ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb6e000
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: OHCI PCI host controller
>usb usb4: Manufacturer: Linux 3.16.3-vdb ohci_hcd
>usb usb4: SerialNumber: 0000:00:13.0
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 5 ports detected
>ohci-pci 0000:00:14.5: OHCI PCI host controller
>ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
>ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb6c000
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: OHCI PCI host controller
>usb usb5: Manufacturer: Linux 3.16.3-vdb ohci_hcd
>usb usb5: SerialNumber: 0000:00:14.5
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ohci-platform: OHCI generic platform driver
>uhci_hcd: USB Universal Host Controller Interface driver
>xhci_hcd 0000:00:10.0: xHCI Host Controller
>xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
>xhci_hcd 0000:00:10.0: irq 76 for MSI/MSI-X
>xhci_hcd 0000:00:10.0: irq 77 for MSI/MSI-X
>xhci_hcd 0000:00:10.0: irq 78 for MSI/MSI-X
>xhci_hcd 0000:00:10.0: irq 79 for MSI/MSI-X
>xhci_hcd 0000:00:10.0: irq 80 for MSI/MSI-X
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: xHCI Host Controller
>usb usb6: Manufacturer: Linux 3.16.3-vdb xhci_hcd
>usb usb6: SerialNumber: 0000:00:10.0
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>xhci_hcd 0000:00:10.0: xHCI Host Controller
>xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 7
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: xHCI Host Controller
>usb usb7: Manufacturer: Linux 3.16.3-vdb xhci_hcd
>usb usb7: SerialNumber: 0000:00:10.0
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>xhci_hcd 0000:00:10.1: xHCI Host Controller
>xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 8
>xhci_hcd 0000:00:10.1: irq 81 for MSI/MSI-X
>xhci_hcd 0000:00:10.1: irq 82 for MSI/MSI-X
>xhci_hcd 0000:00:10.1: irq 83 for MSI/MSI-X
>xhci_hcd 0000:00:10.1: irq 84 for MSI/MSI-X
>xhci_hcd 0000:00:10.1: irq 85 for MSI/MSI-X
>usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb8: Product: xHCI Host Controller
>usb usb8: Manufacturer: Linux 3.16.3-vdb xhci_hcd
>usb usb8: SerialNumber: 0000:00:10.1
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 2 ports detected
>xhci_hcd 0000:00:10.1: xHCI Host Controller
>xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 9
>usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
>usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb9: Product: xHCI Host Controller
>usb usb9: Manufacturer: Linux 3.16.3-vdb xhci_hcd
>usb usb9: SerialNumber: 0000:00:10.1
>hub 9-0:1.0: USB hub found
>hub 9-0:1.0: 2 ports detected
>fusbh200_hcd: FUSBH200 Host Controller (EHCI) Driver
>Warning! fusbh200_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
>fotg210_hcd: FOTG210 Host Controller (EHCI) Driver
>4Warning! fotg210_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
>usbcore: registered new interface driver usblp
>usbcore: registered new interface driver uas
>usbcore: registered new interface driver usb-storage
>i8042: PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mousedev: PS/2 mouse device common for all mice
>usbcore: registered new interface driver wacom
>rtc_cmos 00:05: RTC can wake from S4
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>i2c /dev entries driver
>b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
>usbcore: registered new interface driver ttusb-dec
>usbcore: registered new interface driver ttusb
>usbcore: registered new interface driver smsusb
>usbcore: registered new interface driver b2c2_flexcop_usb
>usbcore: registered new interface driver zr364xx
>usbcore: registered new interface driver stkwebcam
>usbcore: registered new interface driver s2255
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (1.1.1)
>gspca_main: v2.14.0 registered
>usbcore: registered new interface driver benq
>usbcore: registered new interface driver conex
>usbcore: registered new interface driver cpia1
>usbcore: registered new interface driver etoms
>usbcore: registered new interface driver finepix
>usbcore: registered new interface driver jeilinj
>usbcore: registered new interface driver jl2005bcd
>usbcore: registered new interface driver kinect
>usbcore: registered new interface driver konica
>usbcore: registered new interface driver mars
>usbcore: registered new interface driver mr97310a
>usbcore: registered new interface driver nw80x
>usbcore: registered new interface driver ov519
>usbcore: registered new interface driver ov534
>usbcore: registered new interface driver ov534_9
>usbcore: registered new interface driver pac207
>usbcore: registered new interface driver gspca_pac7302
>usbcore: registered new interface driver pac7311
>usbcore: registered new interface driver se401
>usbcore: registered new interface driver sn9c2028
>usbcore: registered new interface driver gspca_sn9c20x
>usbcore: registered new interface driver sonixb
>usbcore: registered new interface driver sonixj
>usbcore: registered new interface driver spca500
>usbcore: registered new interface driver spca501
>usbcore: registered new interface driver spca505
>usbcore: registered new interface driver spca506
>usbcore: registered new interface driver spca508
>usbcore: registered new interface driver spca561
>usbcore: registered new interface driver spca1528
>usbcore: registered new interface driver sq905
>usbcore: registered new interface driver sq905c
>usbcore: registered new interface driver sq930x
>usbcore: registered new interface driver sunplus
>usbcore: registered new interface driver stk014
>usbcore: registered new interface driver stv0680
>usbcore: registered new interface driver t613
>usbcore: registered new interface driver gspca_topro
>usbcore: registered new interface driver tv8532
>usbcore: registered new interface driver vc032x
>usbcore: registered new interface driver vicam
>usbcore: registered new interface driver xirlink-cit
>usbcore: registered new interface driver gspca_zc3xx
>usbcore: registered new interface driver ALi m5602
>usbcore: registered new interface driver STV06xx
>usbcore: registered new interface driver gspca_gl860
>usbcore: registered new interface driver Philips webcam
>cpia2: V4L-Driver for Vision CPiA2 based cameras v3.0.1
>usbcore: registered new interface driver cpia2
>au0828 driver loaded
>usbcore: registered new interface driver au0828
>usbcore: registered new interface driver hdpvr
>usbcore: registered new interface driver pvrusb2
>pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner
>pvrusb2: Debug mask is 31 (0x1f)
>usbcore: registered new interface driver usbvision
>USBVision USB Video Device Driver for Linux : 0.9.11
>usbcore: registered new interface driver em28xx
>em28xx: Registered (Em28xx Audio Extension) extension
>em28xx: Registered (Em28xx dvb Extension) extension
>sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
>hidraw: raw HID events driver (C) Jiri Kosina
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>snd_hda_intel 0000:00:01.1: irq 86 for MSI/MSI-X
>usbcore: registered new interface driver snd-usb-audio
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ctnetlink v0.93: registering with nfnetlink.
>sound hdaudioC0D0: autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
>sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>sound hdaudioC0D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ipip: IPv4 over IPv4 tunneling driver
>sound hdaudioC0D0:    mono: mono_out=0x0
>sound hdaudioC0D0:    dig-out=0x3/0x0
>sound hdaudioC0D0:    inputs:
>usb 1-5: new high-speed USB device number 2 using ehci-pci
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP: cubic registered
>Initializing XFRM netlink socket
>input: HD-Audio Generic HDMI as /devices/pci0000:00/0000:00:01.1/sound/card0/input5
>NET: Registered protocol family 10
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>sit: IPv6 over IPv4 tunneling driver
>NET: Registered protocol family 17
>sctp: Hash tables configured (established 65536 bind 65536)
>Key type dns_resolver registered
>registered taskstats version 1
>Btrfs loaded
>  Magic number: 14:888:146
>hub 1-0:1.0: hash matches
>ata_port ata3: hash matches
> ata3: hash matches
>sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
>sound hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>sound hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>sound hdaudioC1D0:    mono: mono_out=0x0
>sound hdaudioC1D0:    inputs:
>sound hdaudioC1D0:      Front Mic=0x19
>sound hdaudioC1D0:      Rear Mic=0x18
>sound hdaudioC1D0:      Line=0x1a
>acpi device:17: hash matches
>console [netcon0] enabled
>netconsole: network logging started
>rtc_cmos 00:05: setting system clock to 2014-09-21 21:06:11 UTC (1411333571)
>acpi-cpufreq: overriding BIOS provided _PSD data
>PM: Checking hibernation image partition /dev/sda2
>input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input6
>input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
>input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
>input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
>input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
>usb 1-5: New USB device found, idVendor=0ac8, idProduct=3420
>usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-5: Product: Vimicro USB 2.0 PC Camera (Venus)
>usb 1-5: Manufacturer: Vimicro
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata5.00: ATAPI: PIONEER DVD-RW  DVR-216D, 1.07, max UDMA/66
>ata6.00: ATAPI: PIONEER DVD-RW  DVR-216D, 1.07, max UDMA/66
>ata2.00: ATA-8: WDC WD20NPVT-00Z2TT0, 01.01A01, max UDMA/133
>ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>ata5.00: configured for UDMA/66 (SET_XFERMODE skipped)
>ata6.00: configured for UDMA/66 (SET_XFERMODE skipped)
>ata2.00: configured for UDMA/133
>ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>uvcvideo: Found UVC 1.00 device Vimicro USB 2.0 PC Camera (Venus) (0ac8:3420)
>input: Vimicro USB 2.0 PC Camera (Venu as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input12
>ata1.00: ATA-8: SanDisk SDSSDX120GG25, R112, max UDMA/133
>ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      SanDisk SDSSDX12 R112 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Direct-Access     ATA      WDC WD20NPVT-00Z 1A01 PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
>sd 1:0:0:0: [sdb] 4096-byte physical blocks
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>Switched to clocksource tsc
>scsi 4:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-216D 1.07 PQ: 0 ANSI: 5
> sdb: sdb1
>sd 1:0:0:0: [sdb] Attached SCSI disk
>sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
>cdrom: Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>sr 4:0:0:0: Attached scsi generic sg2 type 5
>scsi 5:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-216D 1.07 PQ: 0 ANSI: 5
>sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
>sr 5:0:0:0: Attached scsi CD-ROM sr1
>sr 5:0:0:0: Attached scsi generic sg3 type 5
>PM: Hibernation image partition 8:2 present
>PM: Looking for hibernation image.
>PM: Image not found (code -22)
>PM: Hibernation image not present or could not be loaded.
>ALSA device list:
>  #0: HD-Audio Generic at 0xfeb64000 irq 86
>  #1: HD-Audio Generic at 0xfeb60000 irq 16
>UDF-fs: warning (device sda1): udf_fill_super: No partition found (2)
>XFS (sda1): Mounting V4 Filesystem
>XFS (sda1): Ending clean mount
>VFS: Mounted root (xfs filesystem) readonly on device 8:1.
>devtmpfs: mounted
>Freeing unused kernel memory: 1112K (ffffffff82428000 - ffffffff8253e000)
>udevd[1716]: starting version 182
>random: nonblocking pool is initialized
>usb 4-2: new low-speed USB device number 2 using ohci-pci
>usb 4-2: New USB device found, idVendor=046d, idProduct=c30a
>usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 4-2: Product: Logitech USB Keyboard
>usb 4-2: Manufacturer: Logitech
>input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb4/4-2/4-2:1.0/0003:046D:C30A.0001/input/input13
>logitech 0003:046D:C30A.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:13.0-2/input0
>input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb4/4-2/4-2:1.1/0003:046D:C30A.0002/input/input14
>logitech 0003:046D:C30A.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech Logitech USB Keyboard] on usb-0000:00:13.0-2/input1
>usb 4-3: new low-speed USB device number 3 using ohci-pci
>usb 4-3: New USB device found, idVendor=046d, idProduct=c05a
>usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 4-3: Product: USB Optical Mouse
>usb 4-3: Manufacturer: Logitech
>input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb4/4-3/4-3:1.0/0003:046D:C05A.0003/input/input15
>hid-generic 0003:046D:C05A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.0-3/input0
>Adding 8043080k swap on /dev/sda2.  Priority:-1 extents:1 across:8043080k SS
>usb 6-2: new high-speed USB device number 2 using xhci_hcd
>usb 6-2: New USB device found, idVendor=0e8d, idProduct=1956
>usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 6-2: Product: MT1956 
>usb 6-2: Manufacturer: MediaTek Inc
>usb 6-2: SerialNumber: ã¥ä¬°å¤¶äãã°å¸â à¤
>usb-storage 6-2:1.0: USB Mass Storage device detected
>scsi6 : usb-storage 6-2:1.0
>scsi 6:0:0:0: CD-ROM            TSSTcorp BDDVDW SE-506BB  TS00 PQ: 0 ANSI: 0
>sr2: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>sr 6:0:0:0: Attached scsi CD-ROM sr2
>sr 6:0:0:0: Attached scsi generic sg4 type 5
>XFS (sdb1): Mounting V4 Filesystem
>XFS (sdb1): Ending clean mount
>r8169 0000:01:00.0 eth0: link down
>r8169 0000:01:00.0 eth0: link down
>IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>r8169 0000:01:00.0 eth0: link up
>IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>svc: failed to register lockdv1 RPC service (errno 97).
>nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
>konqueror[32436]: segfault at 0 ip           (null) sp 00007fff22d95ff8 error 14 in kdeinit4[400000+c000]

Actions: View

Attachments on bug 84255: 106755 | 106756 | 106757 | 106777 | 106778 | 106779

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.