[37561.520453] 6,868,768144279,-;work: around
[37561.572518] [drm:i915_gem_open] 
[37561.573778] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7fbf0
[37561.679129] [drm:valleyview_set_rps] GPU freq request from 854 MHz (224) to 167 MHz (191)
[37561.738230] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7f9f0
[37561.738242] [drm:i915_gem_context_create_ioctl] HW context 1 created
[37561.738778] [drm:valleyview_set_rps] GPU freq request from 167 MHz (191) to 854 MHz (224)
[37561.747710] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7e9f0
[37561.747723] [drm:i915_gem_context_create_ioctl] HW context 2 created
[37561.750202] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed
[37561.753216] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7e7f0
[37561.753228] [drm:i915_gem_context_create_ioctl] HW context 1 created
[37561.754977] [drm:i915_gem_context_destroy_ioctl] HW context 2 destroyed
[37561.757368] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed
[37561.804419] [drm:i915_gem_open] 
[37561.805661] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7edf0
[37561.910330] [drm:valleyview_set_rps] GPU freq request from 854 MHz (224) to 167 MHz (191)
[37561.971195] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7e9f0
[37561.971208] [drm:i915_gem_context_create_ioctl] HW context 1 created
[37561.971852] [drm:valleyview_set_rps] GPU freq request from 167 MHz (191) to 854 MHz (224)
[37562.369648] [drm:valleyview_set_rps] GPU freq request from 854 MHz (224) to 167 MHz (191)
[37564.144788] [drm:add_framebuffer_internal] [FB:36]
[37564.144806] [drm:g4x_check_srwm] SR watermark: display plane 56, cursor 6
[37564.144810] [drm:g4x_check_srwm] SR watermark: display plane 109, cursor 10
[37564.144815] [drm:valleyview_update_wm] Setting FIFO watermarks - A: plane=109, cursor=6, B: plane=2, cursor=2, SR: plane=56, cursor=10
[37564.144820] [drm:intel_set_memory_cxsr] memory self-refresh is enabled
[37564.146773] [drm:intel_crtc_cursor_set_obj] cursor off
[37564.146790] [drm:g4x_check_srwm] SR watermark: display plane 56, cursor 2
[37564.146794] [drm:g4x_check_srwm] SR watermark: display plane 109, cursor 2
[37564.146799] [drm:valleyview_update_wm] Setting FIFO watermarks - A: plane=109, cursor=2, B: plane=2, cursor=2, SR: plane=56, cursor=2
[37564.146804] [drm:intel_set_memory_cxsr] memory self-refresh is enabled
[37564.198222] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
[37564.198231] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=1, fb_changed=0
[37564.198235] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [NOCRTC]
[37564.198238] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
[37564.198242] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
[37564.198247] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch
[37564.198252] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 1
[37564.200127] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
[37564.253151] [drm:edp_panel_vdd_on] Turning eDP VDD on
[37564.253161] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
[37564.277167] [drm:intel_edp_backlight_off] 
[37564.526378] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
[37564.574546] [drm:intel_edp_panel_off] Turn eDP power off
[37564.598562] [drm:wait_panel_off] Wait for panel power off time
[37564.598570] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
[37564.642589] [drm:wait_panel_status] Wait complete
[37564.658822] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000, dig 0x00000000
[37564.658828] [drm:intel_hpd_irq_handler] digital hpd port C - short
[37564.658899] [drm:intel_dp_hpd_pulse] got hpd irq on port C - short
[37564.706703] [drm:intel_dp_link_down] 
[37564.757879] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
[37564.757888] [drm:valleyview_update_wm] Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0
[37564.777711] [drm:vlv_update_cdclk] Current CD clock rate: 200000 kHz
[37564.809744] [drm:check_encoder_state] [ENCODER:17:DAC-17]
[37564.809750] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
[37564.809755] [drm:check_encoder_state] [ENCODER:23:TMDS-23]
[37564.809759] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
[37564.809763] [drm:check_encoder_state] [ENCODER:27:TMDS-27]
[37564.809767] [drm:check_crtc_state] [CRTC:8]
[37564.809772] [drm:check_crtc_state] [CRTC:13]
[37564.809846] [drm:intel_display_power_put] disabling dpio-common
[37564.811304] [drm:intel_crtc_set_config] [CRTC:8] [FB:35] #connectors=1 (x y) (0 0)
[37564.811312] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set
[37564.811317] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=1, fb_changed=0
[37564.811321] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
[37564.811325] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8]
[37564.811329] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
[37564.811333] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch
[37564.811338] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[37564.811343] [drm:connected_sink_compute_bpp] [CONNECTOR:28:eDP-1] checking for sink bpp constrains
[37564.811347] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18
[37564.811354] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 0a pixel clock 71000KHz
[37564.811359] [drm:intel_dp_compute_config] DP link bw 0a lane count 1 clock 270000 bpp 18
[37564.811363] [drm:intel_dp_compute_config] DP link bw required 127800 available 216000
[37564.811368] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1
[37564.811372] [drm:intel_dump_pipe_config] [CRTC:8][modeset] config for pipe A
[37564.811375] [drm:intel_dump_pipe_config] cpu_transcoder: A
[37564.811379] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
[37564.811383] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[37564.811388] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 2481629, gmch_n: 4194304, link_m: 137868, link_n: 524288, tu: 64
[37564.811392] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[37564.811396] [drm:intel_dump_pipe_config] requested mode:
[37564.811402] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 71000 1366 1404 1426 1482 768 771 777 798 0x48 0xa
[37564.811405] [drm:intel_dump_pipe_config] adjusted mode:
[37564.811411] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 71000 1366 1404 1426 1482 768 771 777 798 0x48 0xa
[37564.811416] [drm:intel_dump_crtc_timings] crtc timings: 71000 1366 1404 1426 1482 768 771 777 798, type: 0x48 flags: 0xa
[37564.811420] [drm:intel_dump_pipe_config] port clock: 270000
[37564.811423] [drm:intel_dump_pipe_config] pipe src size: 1366x768
[37564.811427] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[37564.811431] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[37564.811434] [drm:intel_dump_pipe_config] ips: 0
[37564.811437] [drm:intel_dump_pipe_config] double wide: 0
[37564.821616] [drm:intel_display_power_put] disabling dpio-tx-c-23
[37564.833759] [drm:intel_display_power_put] disabling dpio-tx-c-01
[37564.845634] [drm:intel_display_power_put] disabling dpio-tx-b-23
[37564.857644] [drm:intel_display_power_put] disabling dpio-tx-b-01
[37564.869654] [drm:intel_display_power_put] disabling display
[37564.903817] [drm:vlv_update_cdclk] Current CD clock rate: 266667 kHz
[37564.903824] [drm:intel_display_power_get] enabling display
[37564.911895] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
[37564.923829] [drm:intel_display_power_get] enabling dpio-tx-b-01
[37564.935838] [drm:intel_display_power_get] enabling dpio-tx-b-23
[37564.947713] [drm:intel_display_power_get] enabling dpio-tx-c-01
[37564.959723] [drm:intel_display_power_get] enabling dpio-tx-c-23
[37564.971732] [drm:intel_display_power_get] enabling dpio-common
[37565.047930] [drm:vlv_init_panel_power_sequencer] initializing pipe A power sequencer for port C
[37565.047939] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 0 t8 0 t9 0 t10 0 t11_t12 4000
[37565.047944] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
[37565.047949] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 500
[37565.047952] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200
[37565.047959] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f05
[37565.119988] [drm:edp_panel_vdd_on] Turning eDP VDD on
[37565.119994] [drm:wait_panel_power_cycle] Wait for panel power cycle
[37565.120000] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000
[37565.406478] [drm:wait_panel_status] Wait complete
[37565.406513] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
[37565.406517] [drm:edp_panel_vdd_on] eDP was not running
[37565.500027] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000, dig 0x00000000
[37565.500051] [drm:intel_hpd_irq_handler] digital hpd port C - short
[37565.500137] [drm:intel_dp_hpd_pulse] got hpd irq on port C - short
[37565.613394] [drm:intel_edp_panel_on] Turn eDP power on
[37565.637412] [drm:wait_panel_power_cycle] Wait for panel power cycle
[37565.637420] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008
[37565.637424] [drm:wait_panel_status] Wait complete
[37565.637428] [drm:wait_panel_on] Wait for panel power on
[37565.637433] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b
[37565.791789] [drm:wait_panel_status] Wait complete
[37565.839577] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off
[37565.839585] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
[37565.935654] [drm:edp_panel_vdd_on] Turning eDP VDD on
[37565.935663] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
[37566.069764] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
[37566.165840] [drm:intel_dp_start_link_train] clock recovery OK
[37566.261917] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
[37566.309994] [drm:g4x_check_srwm] SR watermark: display plane 56, cursor 2
[37566.310000] [drm:g4x_check_srwm] SR watermark: display plane 109, cursor 2
[37566.310005] [drm:valleyview_update_wm] Setting FIFO watermarks - A: plane=109, cursor=2, B: plane=2, cursor=2, SR: plane=56, cursor=2
[37566.310010] [drm:intel_set_memory_cxsr] memory self-refresh is enabled
[37566.310018] [drm:intel_edp_backlight_on] 
[37566.310022] [drm:intel_panel_enable_backlight] pipe A
[37566.310026] [drm:intel_panel_actually_set_backlight] set backlight PWM = 3906
[37566.358003] [drm:i9xx_update_primary_plane] Writing base 00475000 00000000 0 0 5504
[37566.358016] [drm:intel_connector_check_state] [CONNECTOR:28:eDP-1]
[37566.358025] [drm:check_encoder_state] [ENCODER:17:DAC-17]
[37566.358029] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
[37566.358033] [drm:check_encoder_state] [ENCODER:23:TMDS-23]
[37566.358037] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
[37566.358042] [drm:check_encoder_state] [ENCODER:27:TMDS-27]
[37566.358046] [drm:check_crtc_state] [CRTC:8]
[37566.359870] [drm:check_crtc_state] [CRTC:13]
[37566.359879] [drm:intel_crtc_set_config] [CRTC:13] [NOFB]
[37566.359884] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0
[37566.359889] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8]
[37566.456076] [drm:intel_dp_get_dpcd] DPCD: 11 0a 81 41 00 00 01 80 02 00 00 00 0f 07 00
[37568.466717] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off
[37568.466726] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
[37570.012428] [drm:i915_gem_open] 
[37570.013621] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7fbf0
[37570.013959] [drm:intel_crtc_set_config] [CRTC:8] [FB:35] #connectors=1 (x y) (0 0)
[37570.013969] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
[37570.013974] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8]
[37570.013980] [drm:intel_crtc_set_config] [CRTC:13] [NOFB]
[37570.013984] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0
[37570.013988] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8]
[37570.024192] [drm:intel_crtc_set_config] [CRTC:8] [FB:35] #connectors=1 (x y) (0 0)
[37570.024197] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
[37570.024199] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8]
[37570.033029] [drm:i915_gem_open] 
[37570.034286] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7edf0
[37570.034331] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[5] ENCODERS[5]
[37570.035051] [drm:i915_gem_open] 
[37570.036310] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7e7f0
[37570.036350] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[5] ENCODERS[5]
[37570.036361] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[5] ENCODERS[5]
[37570.037433] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[5] ENCODERS[5]
[37570.037461] [drm:drm_mode_addfb] [FB:33]
[37570.037771] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[5] ENCODERS[5]
[37570.037780] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[5] ENCODERS[5]
[37570.037915] [drm:drm_mode_getconnector] [CONNECTOR:28:?]
[37570.037940] [drm:drm_mode_getconnector] [CONNECTOR:28:?]
[37570.038355] [drm:drm_mode_getconnector] [CONNECTOR:16:?]
[37570.038369] [drm:drm_mode_getconnector] [CONNECTOR:16:?]
[37570.038444] [drm:drm_mode_getconnector] [CONNECTOR:19:?]
[37570.038456] [drm:drm_mode_getconnector] [CONNECTOR:19:?]
[37570.038532] [drm:drm_mode_getconnector] [CONNECTOR:24:?]
[37570.038544] [drm:drm_mode_getconnector] [CONNECTOR:24:?]
[37570.038618] [drm:drm_mode_getconnector] [CONNECTOR:26:?]
[37570.038629] [drm:drm_mode_getconnector] [CONNECTOR:26:?]
[37570.222964] [drm:drm_mode_addfb] [FB:33]
[37570.223385] [drm:drm_mode_setcrtc] [CRTC:8]
[37570.223393] [drm:drm_mode_setcrtc] [CONNECTOR:28:eDP-1]
[37570.223399] [drm:intel_crtc_set_config] [CRTC:8] [FB:33] #connectors=1 (x y) (0 0)
[37570.223405] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=1
[37570.223409] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8]
[37570.227148] [drm:i9xx_update_primary_plane] Writing base 0087D000 00000000 0 0 5632
[37570.227612] [drm:drm_mode_setcrtc] [CRTC:13]
[37570.227617] [drm:intel_crtc_set_config] [CRTC:13] [NOFB]
[37570.227622] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0
[37570.227626] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8]
[37572.113813] [drm:i915_gem_open] 
[37572.115051] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7fbf0
[37572.281156] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7f9f0
[37572.281170] [drm:i915_gem_context_create_ioctl] HW context 1 created
[37572.281755] [drm:valleyview_set_rps] GPU freq request from 167 MHz (191) to 854 MHz (224)
[37572.980360] [drm:valleyview_set_rps] GPU freq request from 854 MHz (224) to 833 MHz (223)
[37575.613942] [drm:valleyview_set_rps] GPU freq request from 833 MHz (223) to 812 MHz (222)
[37578.218644] [drm:valleyview_set_rps] GPU freq request from 812 MHz (222) to 791 MHz (221)
[37580.801942] [drm:valleyview_set_rps] GPU freq request from 791 MHz (221) to 771 MHz (220)
[37581.397465] [drm:valleyview_set_rps] GPU freq request from 771 MHz (220) to 167 MHz (191)
[38170.906877] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=0/3906
[38170.906885] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
[38170.954532] [drm:intel_edp_backlight_power] panel power control backlight disable
[38171.203724] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
[38171.261784] [drm:edp_panel_vdd_on] Turning eDP VDD on
[38171.261795] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
[38171.285818] [drm:intel_edp_backlight_off] 
[38171.534878] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
[38171.583093] [drm:intel_edp_panel_off] Turn eDP power off
[38171.607123] [drm:wait_panel_off] Wait for panel power off time
[38171.607131] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
[38171.651150] [drm:wait_panel_status] Wait complete
[38171.666613] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000, dig 0x00000000
[38171.666620] [drm:intel_hpd_irq_handler] digital hpd port C - short
[38171.666692] [drm:intel_dp_hpd_pulse] got hpd irq on port C - short
[38171.715239] [drm:intel_dp_link_down] 
[38171.766378] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
[38171.766387] [drm:valleyview_update_wm] Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0
[38171.798237] [drm:check_encoder_state] [ENCODER:17:DAC-17]
[38171.798243] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
[38171.798248] [drm:check_encoder_state] [ENCODER:23:TMDS-23]
[38171.798252] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
[38171.798256] [drm:check_encoder_state] [ENCODER:27:TMDS-27]
[38171.798261] [drm:check_crtc_state] [CRTC:8]
[38171.798266] [drm:check_crtc_state] [CRTC:13]
[38171.798287] [drm:drm_mode_setcrtc] [CRTC:8]
[38171.798292] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
[38171.798297] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=1, fb_changed=0
[38171.798301] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [NOCRTC]
[38171.798304] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
[38171.798308] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
[38171.798312] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch
[38171.798317] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 1
[38171.820229] [drm:vlv_update_cdclk] Current CD clock rate: 200000 kHz
[38171.820240] [drm:check_encoder_state] [ENCODER:17:DAC-17]
[38171.820245] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
[38171.820249] [drm:check_encoder_state] [ENCODER:23:TMDS-23]
[38171.820253] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
[38171.820257] [drm:check_encoder_state] [ENCODER:27:TMDS-27]
[38171.820261] [drm:check_crtc_state] [CRTC:8]
[38171.820266] [drm:check_crtc_state] [CRTC:13]
[38171.820336] [drm:intel_display_power_put] disabling dpio-common
[38171.832111] [drm:intel_display_power_put] disabling dpio-tx-c-23
[38171.844120] [drm:intel_display_power_put] disabling dpio-tx-c-01
[38171.856130] [drm:intel_display_power_put] disabling dpio-tx-b-23
[38171.868140] [drm:intel_display_power_put] disabling dpio-tx-b-01
[38171.880149] [drm:intel_display_power_put] disabling display
[44093.043793] gem_userptr_blits: executing
[44093.043972] [drm:i915_gem_open] 
[44093.045295] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7f7f0
[44093.046133] [drm:i915_gem_open] 
[44093.047410] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7f5f0
[44093.048733] gem_userptr_blits: starting subtest create-destroy-sync
[44094.588350] [drm:drm_mode_setcrtc] [CRTC:8]
[44094.588361] [drm:drm_mode_setcrtc] [CONNECTOR:28:eDP-1]
[44094.588367] [drm:intel_crtc_set_config] [CRTC:8] [FB:33] #connectors=1 (x y) (0 0)
[44094.588373] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set
[44094.588377] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=1, fb_changed=0
[44094.588381] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
[44094.588385] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8]
[44094.588389] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
[44094.588392] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch
[44094.588398] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[44094.588403] [drm:connected_sink_compute_bpp] [CONNECTOR:28:eDP-1] checking for sink bpp constrains
[44094.588407] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18
[44094.588413] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 0a pixel clock 71000KHz
[44094.588418] [drm:intel_dp_compute_config] DP link bw 0a lane count 1 clock 270000 bpp 18
[44094.588422] [drm:intel_dp_compute_config] DP link bw required 127800 available 216000
[44094.588427] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1
[44094.588431] [drm:intel_dump_pipe_config] [CRTC:8][modeset] config for pipe A
[44094.588434] [drm:intel_dump_pipe_config] cpu_transcoder: A
[44094.588438] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
[44094.588442] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[44094.588447] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 2481629, gmch_n: 4194304, link_m: 137868, link_n: 524288, tu: 64
[44094.588451] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[44094.588454] [drm:intel_dump_pipe_config] requested mode:
[44094.588461] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 0 71000 1366 1404 1426 1482 768 771 777 798 0x0 0xa
[44094.588464] [drm:intel_dump_pipe_config] adjusted mode:
[44094.588469] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 71000 1366 1404 1426 1482 768 771 777 798 0x48 0xa
[44094.588475] [drm:intel_dump_crtc_timings] crtc timings: 71000 1366 1404 1426 1482 768 771 777 798, type: 0x48 flags: 0xa
[44094.588478] [drm:intel_dump_pipe_config] port clock: 270000
[44094.588482] [drm:intel_dump_pipe_config] pipe src size: 1366x768
[44094.588486] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[44094.588490] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[44094.588493] [drm:intel_dump_pipe_config] ips: 0
[44094.588496] [drm:intel_dump_pipe_config] double wide: 0
[44094.610488] [drm:vlv_update_cdclk] Current CD clock rate: 266667 kHz
[44094.610497] [drm:intel_display_power_get] enabling display
[44094.618488] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
[44094.630501] [drm:intel_display_power_get] enabling dpio-tx-b-01
[44094.642485] [drm:intel_display_power_get] enabling dpio-tx-b-23
[44094.654510] [drm:intel_display_power_get] enabling dpio-tx-c-01
[44094.666519] [drm:intel_display_power_get] enabling dpio-tx-c-23
[44094.678533] [drm:intel_display_power_get] enabling dpio-common
[44094.754639] [drm:vlv_init_panel_power_sequencer] initializing pipe A power sequencer for port C
[44094.754649] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 0 t8 0 t9 0 t10 0 t11_t12 4000
[44094.754654] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
[44094.754658] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 500
[44094.754662] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200
[44094.754669] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f05
[44094.826658] [drm:edp_panel_vdd_on] Turning eDP VDD on
[44094.826665] [drm:wait_panel_power_cycle] Wait for panel power cycle
[44094.826671] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000
[44095.112881] [drm:wait_panel_status] Wait complete
[44095.112890] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
[44095.112894] [drm:edp_panel_vdd_on] eDP was not running
[44095.206132] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000, dig 0x00000000
[44095.206139] [drm:intel_hpd_irq_handler] digital hpd port C - short
[44095.206160] [drm:intel_dp_hpd_pulse] got hpd irq on port C - short
[44095.338058] [drm:intel_edp_panel_on] Turn eDP power on
[44095.361955] [drm:wait_panel_power_cycle] Wait for panel power cycle
[44095.361963] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008
[44095.361967] [drm:wait_panel_status] Wait complete
[44095.361971] [drm:wait_panel_on] Wait for panel power on
[44095.361976] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b
[44095.516074] [drm:wait_panel_status] Wait complete
[44095.564119] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off
[44095.564126] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
[44095.660195] [drm:edp_panel_vdd_on] Turning eDP VDD on
[44095.660203] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
[44095.794304] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
[44095.890384] [drm:intel_dp_start_link_train] clock recovery OK
[44095.986460] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
[44096.034546] [drm:g4x_check_srwm] SR watermark: display plane 56, cursor 2
[44096.034551] [drm:g4x_check_srwm] SR watermark: display plane 109, cursor 2
[44096.034556] [drm:valleyview_update_wm] Setting FIFO watermarks - A: plane=109, cursor=2, B: plane=2, cursor=2, SR: plane=56, cursor=2
[44096.034561] [drm:intel_set_memory_cxsr] memory self-refresh is enabled
[44096.034568] [drm:intel_edp_backlight_on] 
[44096.034572] [drm:intel_panel_enable_backlight] pipe A
[44096.034577] [drm:intel_panel_actually_set_backlight] set backlight PWM = 3906
[44096.082544] [drm:i9xx_update_primary_plane] Writing base 0087D000 00000000 0 0 5632
[44096.082560] [drm:intel_connector_check_state] [CONNECTOR:28:eDP-1]
[44096.082569] [drm:check_encoder_state] [ENCODER:17:DAC-17]
[44096.082574] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
[44096.082578] [drm:check_encoder_state] [ENCODER:23:TMDS-23]
[44096.082582] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
[44096.082586] [drm:check_encoder_state] [ENCODER:27:TMDS-27]
[44096.082591] [drm:check_crtc_state] [CRTC:8]
[44096.084545] [drm:check_crtc_state] [CRTC:13]
[44096.180617] [drm:intel_dp_get_dpcd] DPCD: 11 0a 81 41 00 00 01 80 02 00 00 00 0f 07 00
[44096.324807] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=3906/3906
[44096.324813] [drm:intel_panel_actually_set_backlight] set backlight PWM = 3906
[44098.191391] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off
[44098.191401] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
[44100.802068] [drm:intel_crtc_set_config] [CRTC:8] [FB:35] #connectors=1 (x y) (0 0)
[44100.802073] [drm:intel_set_config_compute_mode_changes] crtc has no fb, will flip
[44100.802075] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=1
[44100.802078] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8]
[44100.802093] [drm:i9xx_update_primary_plane] Writing base 00475000 00000000 0 0 5504
[44100.802097] [drm:intel_crtc_set_config] [CRTC:13] [NOFB]
[44100.802100] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0
[44100.802102] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8]
[44100.802109] [drm:intel_crtc_set_config] [CRTC:8] [FB:35] #connectors=1 (x y) (0 0)
[44100.802112] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
[44100.802114] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8]
[44100.802131] [drm:intel_crtc_set_config] [CRTC:8] [FB:35] #connectors=1 (x y) (0 0)
[44100.802134] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
[44100.802136] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8]
[44100.810835] [drm:intel_crtc_set_config] [CRTC:8] [FB:35] #connectors=1 (x y) (0 0)
[44100.810839] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
[44100.810841] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8]
[44100.823948] [drm:intel_crtc_set_config] [CRTC:8] [FB:35] #connectors=1 (x y) (0 0)
[44100.823958] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
[44100.823963] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8]
[44100.823969] [drm:intel_crtc_set_config] [CRTC:13] [NOFB]
[44100.823974] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0
[44100.823978] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8]
[44108.822412] gem_userptr_blits: executing
[44108.822595] [drm:i915_gem_open] 
[44108.823828] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7f3f0
[44108.824627] [drm:i915_gem_open] 
[44108.825876] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7f1f0
[44108.827272] gem_userptr_blits: starting subtest create-destroy-sync
[44113.848631] [drm:intel_crtc_set_config] [CRTC:8] [FB:35] #connectors=1 (x y) (0 0)
[44113.848642] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
[44113.848647] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8]
[44113.848653] [drm:intel_crtc_set_config] [CRTC:13] [NOFB]
[44113.848658] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0
[44113.848662] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8]
[44702.202614] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
[44702.249487] [drm:edp_panel_vdd_on] Turning eDP VDD on
[44702.249494] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
[44702.273504] [drm:intel_edp_backlight_off] 
[44702.522680] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
[44702.570748] [drm:intel_edp_panel_off] Turn eDP power off
[44702.594768] [drm:wait_panel_off] Wait for panel power off time
[44702.594772] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
[44702.638791] [drm:wait_panel_status] Wait complete
[44702.654240] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000, dig 0x00000000
[44702.654243] [drm:intel_hpd_irq_handler] digital hpd port C - short
[44702.654259] [drm:intel_dp_hpd_pulse] got hpd irq on port C - short
[44702.688890] [drm:intel_dp_link_down] 
[44702.739821] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
[44702.739824] [drm:valleyview_update_wm] Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0
[44702.771907] [drm:check_encoder_state] [ENCODER:17:DAC-17]
[44702.771910] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
[44702.771913] [drm:check_encoder_state] [ENCODER:23:TMDS-23]
[44702.771915] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
[44702.771917] [drm:check_encoder_state] [ENCODER:27:TMDS-27]
[44702.771920] [drm:check_crtc_state] [CRTC:8]
[44702.771923] [drm:check_crtc_state] [CRTC:13]
[44702.771930] [drm:check_encoder_state] [ENCODER:17:DAC-17]
[44702.771932] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
[44702.771934] [drm:check_encoder_state] [ENCODER:23:TMDS-23]
[44702.771936] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
[44702.771939] [drm:check_encoder_state] [ENCODER:27:TMDS-27]
[44702.771941] [drm:check_crtc_state] [CRTC:8]
[44702.771943] [drm:check_crtc_state] [CRTC:13]
[44702.771948] [drm:check_encoder_state] [ENCODER:17:DAC-17]
[44702.771951] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
[44702.771953] [drm:check_encoder_state] [ENCODER:23:TMDS-23]
[44702.771955] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
[44702.771957] [drm:check_encoder_state] [ENCODER:27:TMDS-27]
[44702.771959] [drm:check_crtc_state] [CRTC:8]
[44702.771961] [drm:check_crtc_state] [CRTC:13]
[44702.771966] [drm:check_encoder_state] [ENCODER:17:DAC-17]
[44702.771968] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
[44702.771970] [drm:check_encoder_state] [ENCODER:23:TMDS-23]
[44702.771973] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
[44702.771975] [drm:check_encoder_state] [ENCODER:27:TMDS-27]
[44702.771977] [drm:check_crtc_state] [CRTC:8]
[44702.771979] [drm:check_crtc_state] [CRTC:13]
[44702.771988] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=3906/3906
[44702.772047] [drm:intel_display_power_put] disabling dpio-common
[44702.783922] [drm:intel_display_power_put] disabling dpio-tx-c-23
[44702.795918] [drm:intel_display_power_put] disabling dpio-tx-c-01
[44702.807804] [drm:intel_display_power_put] disabling dpio-tx-b-23
[44702.819813] [drm:intel_display_power_put] disabling dpio-tx-b-01
[44702.831823] [drm:intel_display_power_put] disabling display
[45564.010772] [drm:intel_display_power_get] enabling display
[45564.014132] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
[45564.026108] [drm:intel_display_power_get] enabling dpio-tx-b-01
[45564.038127] [drm:intel_display_power_get] enabling dpio-tx-b-23
[45564.050137] [drm:intel_display_power_get] enabling dpio-tx-c-01
[45564.062144] [drm:intel_display_power_get] enabling dpio-tx-c-23
[45564.074015] [drm:intel_display_power_get] enabling dpio-common
[45564.150217] [drm:vlv_init_panel_power_sequencer] initializing pipe A power sequencer for port C
[45564.150223] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 0 t8 0 t9 0 t10 0 t11_t12 4000
[45564.150226] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
[45564.150229] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 500
[45564.150230] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200
[45564.150235] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f05
[45564.222268] [drm:edp_panel_vdd_on] Turning eDP VDD on
[45564.222271] [drm:wait_panel_power_cycle] Wait for panel power cycle
[45564.222275] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000
[45564.508764] [drm:wait_panel_status] Wait complete
[45564.508781] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
[45564.508787] [drm:edp_panel_vdd_on] eDP was not running
[45564.602413] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000, dig 0x00000000
[45564.602421] [drm:intel_hpd_irq_handler] digital hpd port C - short
[45564.602494] [drm:intel_dp_hpd_pulse] got hpd irq on port C - short
[45564.733756] [drm:intel_edp_panel_on] Turn eDP power on
[45564.757753] [drm:wait_panel_power_cycle] Wait for panel power cycle
[45564.757758] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008
[45564.757760] [drm:wait_panel_status] Wait complete
[45564.757762] [drm:wait_panel_on] Wait for panel power on
[45564.757765] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b
[45564.911863] [drm:wait_panel_status] Wait complete
[45564.959903] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off
[45564.959908] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
[45565.055989] [drm:edp_panel_vdd_on] Turning eDP VDD on
[45565.055994] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
[45565.190075] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
[45565.286145] [drm:intel_dp_start_link_train] clock recovery OK
[45565.382217] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
[45565.430297] [drm:g4x_check_srwm] SR watermark: display plane 56, cursor 2
[45565.430300] [drm:g4x_check_srwm] SR watermark: display plane 109, cursor 2
[45565.430303] [drm:valleyview_update_wm] Setting FIFO watermarks - A: plane=109, cursor=2, B: plane=2, cursor=2, SR: plane=56, cursor=2
[45565.430306] [drm:intel_set_memory_cxsr] memory self-refresh is enabled
[45565.430311] [drm:intel_edp_backlight_on] 
[45565.430313] [drm:intel_panel_enable_backlight] pipe A
[45565.430316] [drm:intel_panel_actually_set_backlight] set backlight PWM = 3906
[45565.478297] [drm:i9xx_update_primary_plane] Writing base 00475000 00000000 0 0 5504
[45565.478306] [drm:intel_connector_check_state] [CONNECTOR:28:eDP-1]
[45565.478313] [drm:check_encoder_state] [ENCODER:17:DAC-17]
[45565.478315] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
[45565.478317] [drm:check_encoder_state] [ENCODER:23:TMDS-23]
[45565.478319] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
[45565.478322] [drm:check_encoder_state] [ENCODER:27:TMDS-27]
[45565.478324] [drm:check_crtc_state] [CRTC:8]
[45565.480299] [drm:check_crtc_state] [CRTC:13]
[45565.480305] [drm:intel_connector_check_state] [CONNECTOR:28:eDP-1]
[45565.480310] [drm:check_encoder_state] [ENCODER:17:DAC-17]
[45565.480312] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
[45565.480314] [drm:check_encoder_state] [ENCODER:23:TMDS-23]
[45565.480316] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
[45565.480318] [drm:check_encoder_state] [ENCODER:27:TMDS-27]
[45565.480321] [drm:check_crtc_state] [CRTC:8]
[45565.482296] [drm:check_crtc_state] [CRTC:13]
[45565.482301] [drm:intel_connector_check_state] [CONNECTOR:28:eDP-1]
[45565.482306] [drm:check_encoder_state] [ENCODER:17:DAC-17]
[45565.482308] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
[45565.482311] [drm:check_encoder_state] [ENCODER:23:TMDS-23]
[45565.482313] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
[45565.482315] [drm:check_encoder_state] [ENCODER:27:TMDS-27]
[45565.482317] [drm:check_crtc_state] [CRTC:8]
[45565.484301] [drm:check_crtc_state] [CRTC:13]
[45565.484305] [drm:intel_connector_check_state] [CONNECTOR:28:eDP-1]
[45565.484310] [drm:check_encoder_state] [ENCODER:17:DAC-17]
[45565.484313] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
[45565.484315] [drm:check_encoder_state] [ENCODER:23:TMDS-23]
[45565.484317] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
[45565.484319] [drm:check_encoder_state] [ENCODER:27:TMDS-27]
[45565.484321] [drm:check_crtc_state] [CRTC:8]
[45565.486311] [drm:check_crtc_state] [CRTC:13]
[45565.486323] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=3906/3906
[45565.486325] [drm:intel_panel_actually_set_backlight] set backlight PWM = 3906
[45565.534358] [drm:intel_crtc_set_config] [CRTC:8] [FB:35] #connectors=1 (x y) (0 0)
[45565.534363] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
[45565.534365] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8]
[45565.628412] [drm:intel_dp_get_dpcd] DPCD: 11 0a 81 41 00 00 01 80 02 00 00 00 0f 07 00
[45567.574042] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off
[45567.574052] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
[46167.714216] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
[46167.760948] [drm:edp_panel_vdd_on] Turning eDP VDD on
[46167.760954] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
[46167.784967] [drm:intel_edp_backlight_off] 
[46168.034270] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
[46168.082210] [drm:intel_edp_panel_off] Turn eDP power off
[46168.106230] [drm:wait_panel_off] Wait for panel power off time
[46168.106234] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
[46168.150263] [drm:wait_panel_status] Wait complete
[46168.165706] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000, dig 0x00000000
[46168.165708] [drm:intel_hpd_irq_handler] digital hpd port C - short
[46168.165725] [drm:intel_dp_hpd_pulse] got hpd irq on port C - short
[46168.200354] [drm:intel_dp_link_down] 
[46168.251265] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
[46168.251269] [drm:valleyview_update_wm] Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0
[46168.283370] [drm:check_encoder_state] [ENCODER:17:DAC-17]
[46168.283373] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
[46168.283375] [drm:check_encoder_state] [ENCODER:23:TMDS-23]
[46168.283377] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
[46168.283379] [drm:check_encoder_state] [ENCODER:27:TMDS-27]
[46168.283382] [drm:check_crtc_state] [CRTC:8]
[46168.283385] [drm:check_crtc_state] [CRTC:13]
[46168.283392] [drm:check_encoder_state] [ENCODER:17:DAC-17]
[46168.283394] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
[46168.283396] [drm:check_encoder_state] [ENCODER:23:TMDS-23]
[46168.283398] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
[46168.283401] [drm:check_encoder_state] [ENCODER:27:TMDS-27]
[46168.283403] [drm:check_crtc_state] [CRTC:8]
[46168.283405] [drm:check_crtc_state] [CRTC:13]
[46168.283410] [drm:check_encoder_state] [ENCODER:17:DAC-17]
[46168.283412] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
[46168.283415] [drm:check_encoder_state] [ENCODER:23:TMDS-23]
[46168.283417] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
[46168.283419] [drm:check_encoder_state] [ENCODER:27:TMDS-27]
[46168.283421] [drm:check_crtc_state] [CRTC:8]
[46168.283423] [drm:check_crtc_state] [CRTC:13]
[46168.283428] [drm:check_encoder_state] [ENCODER:17:DAC-17]
[46168.283430] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
[46168.283432] [drm:check_encoder_state] [ENCODER:23:TMDS-23]
[46168.283435] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
[46168.283437] [drm:check_encoder_state] [ENCODER:27:TMDS-27]
[46168.283439] [drm:check_crtc_state] [CRTC:8]
[46168.283441] [drm:check_crtc_state] [CRTC:13]
[46168.283452] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=3906/3906
[46168.283509] [drm:intel_display_power_put] disabling dpio-common
[46168.295389] [drm:intel_display_power_put] disabling dpio-tx-c-23
[46168.307260] [drm:intel_display_power_put] disabling dpio-tx-c-01
[46168.319269] [drm:intel_display_power_put] disabling dpio-tx-b-23
[46168.331279] [drm:intel_display_power_put] disabling dpio-tx-b-01
[46168.343288] [drm:intel_display_power_put] disabling display
[53180.020506] gem_persistent_relocs: executing
[53180.032905] [drm:i915_gem_open] 
[53180.034207] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7e9f0
[53180.034716] [drm:i915_gem_open] 
[53180.035989] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7fbf0
[53180.038451] gem_persistent_relocs: starting subtest forked-interruptible-faulting-reloc-thrashing
[53180.040791] [drm:valleyview_set_rps] GPU freq request from 167 MHz (191) to 854 MHz (224)
[53180.559241] [drm:valleyview_set_rps] GPU freq request from 854 MHz (224) to 833 MHz (223)
[53180.756395] [drm:valleyview_set_rps] GPU freq request from 833 MHz (223) to 854 MHz (224)
[53255.027866] [drm] no progress on blitter ring
[53255.034101] [drm] GPU HANG: ecode -1:0x00000000, reason: Ring hung, action: reset
[53255.034106] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
[53255.034108] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
[53255.034111] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
[53255.034113] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it.
[53255.034116] [drm] GPU crash dump saved to /sys/class/drm/card0/error
[53255.034816] [drm:i915_error_work_func] resetting chip
[53255.036776] drm/i915: Resetting chip after gpu hang
[53255.036785] [drm:init_status_page] render ring hws offset: 0x0040b000
[53255.037017] [drm:intel_dp_detect] [CONNECTOR:24:DP-1]
[53255.037027] [drm:intel_display_power_get] enabling display
[53255.038788] [drm:init_status_page] bsd ring hws offset: 0x0042f000
[53255.038925] [drm:init_status_page] blitter ring hws offset: 0x00452000
[53255.046799] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
[53255.050804] [drm:intel_display_power_get] enabling dpio-tx-b-01
[53255.060801] [drm:intel_display_power_get] enabling dpio-tx-b-23
[53255.072810] [drm:intel_display_power_get] enabling dpio-tx-c-01
[53255.084822] [drm:intel_display_power_get] enabling dpio-tx-c-23
[53255.096830] [drm:intel_display_power_get] enabling dpio-common
[53255.108843] [drm:intel_display_power_put] disabling dpio-common
[53255.120851] [drm:intel_display_power_put] disabling dpio-tx-c-23
[53255.132861] [drm:intel_display_power_put] disabling dpio-tx-c-01
[53255.144870] [drm:intel_display_power_put] disabling dpio-tx-b-23
[53255.156879] [drm:intel_display_power_put] disabling dpio-tx-b-01
[53255.168889] [drm:intel_display_power_put] disabling display
[53255.180987] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-1]
[53255.180996] [drm:intel_display_power_get] enabling display
[53255.188921] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
[53255.192909] [drm:intel_display_power_get] enabling dpio-tx-b-01
[53255.204919] [drm:intel_display_power_get] enabling dpio-tx-b-23
[53255.216929] [drm:intel_display_power_get] enabling dpio-tx-c-01
[53255.229944] [drm:intel_display_power_get] enabling dpio-tx-c-23
[53255.245951] [drm:intel_display_power_get] enabling dpio-common
[53255.260138] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
[53255.260144] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[53255.260148] [drm:intel_display_power_put] disabling dpio-common
[53255.271968] [drm:intel_display_power_put] disabling dpio-tx-c-23
[53255.283978] [drm:intel_display_power_put] disabling dpio-tx-c-01
[53255.295988] [drm:intel_display_power_put] disabling dpio-tx-b-23
[53255.307998] [drm:intel_display_power_put] disabling dpio-tx-b-01
[53255.320009] [drm:intel_display_power_put] disabling display
[53255.332103] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
[53255.332112] [drm:intel_display_power_get] enabling display
[53255.340039] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
[53255.346035] [drm:intel_display_power_get] enabling dpio-tx-b-01
[53255.358042] [drm:intel_display_power_get] enabling dpio-tx-b-23
[53255.370055] [drm:intel_display_power_get] enabling dpio-tx-c-01
[53255.382065] [drm:intel_display_power_get] enabling dpio-tx-c-23
[53255.394076] [drm:intel_display_power_get] enabling dpio-common
[53255.406364] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[53255.406372] [drm:intel_display_power_put] disabling dpio-common
[53255.418095] [drm:intel_display_power_put] disabling dpio-tx-c-23
[53255.432099] [drm:intel_display_power_put] disabling dpio-tx-c-01
[53255.444109] [drm:intel_display_power_put] disabling dpio-tx-b-23
[53255.456120] [drm:intel_display_power_put] disabling dpio-tx-b-01
[53255.468130] [drm:intel_display_power_put] disabling display
[53255.480217] [drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
[53255.480224] [drm:intel_display_power_get] enabling display
[53255.488155] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
[53255.492149] [drm:intel_display_power_get] enabling dpio-common
[53255.504162] [drm:valleyview_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x40000
[53255.508161] [drm:valleyview_crt_detect_hotplug] valleyview hotplug adpa=0x40000, result 0
[53255.508166] [drm:intel_crt_detect] CRT not detected via hotplug
[53255.508351] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[53255.508356] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[53255.508360] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[53255.508364] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[53255.508645] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[53255.508649] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[53255.508652] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[53255.508656] [drm:intel_display_power_put] disabling dpio-common
[53255.520176] [drm:intel_display_power_put] disabling display
[53255.532239] [drm:intel_dp_detect] [CONNECTOR:28:eDP-1]
[53255.532246] [drm:intel_display_power_get] enabling display
[53255.540192] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
[53255.544193] [drm:intel_display_power_get] enabling dpio-tx-b-01
[53255.556201] [drm:intel_display_power_get] enabling dpio-tx-b-23
[53255.568212] [drm:intel_display_power_get] enabling dpio-tx-c-01
[53255.580220] [drm:intel_display_power_get] enabling dpio-tx-c-23
[53255.592231] [drm:intel_display_power_get] enabling dpio-common
[53255.628261] [drm:vlv_power_sequencer_pipe] picked pipe A power sequencer for port C
[53255.628270] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 0 t8 0 t9 0 t10 0 t11_t12 4000
[53255.628275] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
[53255.628279] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 500
[53255.628283] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200
[53255.628290] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f05
[53255.652283] [drm:edp_panel_vdd_on] Turning eDP VDD on
[53255.652290] [drm:wait_panel_power_cycle] Wait for panel power cycle
[53255.652296] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000
[53255.949524] [drm:wait_panel_status] Wait complete
[53255.949534] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
[53255.949538] [drm:edp_panel_vdd_on] eDP was not running
[53256.042728] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000, dig 0x00000000
[53256.042736] [drm:intel_hpd_irq_handler] digital hpd port C - short
[53256.042761] [drm:intel_dp_hpd_pulse] got hpd irq on port C - short
[53256.224746] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
[53256.272788] [drm:intel_dp_probe_oui] Branch OUI: 000000
[53256.347464] [drm:intel_dp_detect] [CONNECTOR:24:DP-1]
[53256.396947] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-1]
[53256.421084] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
[53256.421090] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[53256.444996] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
[53256.471225] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[53256.495025] [drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
[53256.502970] [drm:valleyview_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x40000
[53256.506974] [drm:valleyview_crt_detect_hotplug] valleyview hotplug adpa=0x40000, result 0
[53256.506979] [drm:intel_crt_detect] CRT not detected via hotplug
[53256.507170] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[53256.507175] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[53256.507179] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[53256.507183] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[53256.507463] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[53256.507467] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[53256.507471] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[53256.515030] [drm:intel_dp_detect] [CONNECTOR:28:eDP-1]
[53256.639082] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
[53256.687123] [drm:intel_dp_probe_oui] Branch OUI: 000000
[53256.761822] [drm:intel_dp_detect] [CONNECTOR:24:DP-1]
[53256.809309] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-1]
[53256.835435] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
[53256.835442] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[53256.859348] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
[53256.885562] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[53256.909358] [drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
[53256.917326] [drm:valleyview_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x40000
[53256.921322] [drm:valleyview_crt_detect_hotplug] valleyview hotplug adpa=0x40000, result 0
[53256.921329] [drm:intel_crt_detect] CRT not detected via hotplug
[53256.921515] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[53256.921520] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[53256.921524] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[53256.921528] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[53256.921817] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[53256.921824] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[53256.921827] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[53256.929413] [drm:intel_dp_detect] [CONNECTOR:28:eDP-1]
[53257.029520] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
[53257.031400] [drm:valleyview_enable_rps] GPLL enabled? yes
[53257.031405] [drm:valleyview_enable_rps] GPU status: 0x0000e0d0
[53257.031409] [drm:valleyview_enable_rps] current GPU freq: 854 MHz (224)
[53257.031413] [drm:valleyview_enable_rps] setting GPU freq to 646 MHz (214)
[53257.031417] [drm:valleyview_set_rps] GPU freq request from 854 MHz (224) to 646 MHz (214)
[53257.057425] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
[53257.105463] [drm:intel_dp_probe_oui] Branch OUI: 000000
[53257.190539] [drm:valleyview_set_rps] GPU freq request from 646 MHz (214) to 667 MHz (215)
[53257.274609] [drm:valleyview_set_rps] GPU freq request from 667 MHz (215) to 708 MHz (217)
[53257.359676] [drm:valleyview_set_rps] GPU freq request from 708 MHz (217) to 791 MHz (221)
[53257.444744] [drm:valleyview_set_rps] GPU freq request from 791 MHz (221) to 854 MHz (224)
[53258.830878] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off
[53258.830888] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0000
[53258.854884] [drm:intel_display_power_put] disabling dpio-common
[53258.866890] [drm:intel_display_power_put] disabling dpio-tx-c-23
[53258.878903] [drm:intel_display_power_put] disabling dpio-tx-c-01
[53258.890916] [drm:intel_display_power_put] disabling dpio-tx-b-23
[53258.904921] [drm:intel_display_power_put] disabling dpio-tx-b-01
[53258.916931] [drm:intel_display_power_put] disabling display
[53296.991585] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=3906/3906
[53329.096266] [drm] no progress on blitter ring
[53329.102504] [drm] GPU HANG: ecode -1:0x00000000, reason: Ring hung, action: reset
[53329.102704] [drm:i915_error_work_func] resetting chip
[53329.104014] drm/i915: Resetting chip after gpu hang
[53329.104026] [drm:init_status_page] render ring hws offset: 0x0040b000
[53329.106011] [drm:init_status_page] bsd ring hws offset: 0x0042f000
[53329.106132] [drm:init_status_page] blitter ring hws offset: 0x00452000
[53329.127363] [drm:intel_dp_detect] [CONNECTOR:24:DP-1]
[53329.127375] [drm:intel_display_power_get] enabling display
[53329.135055] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
[53329.139027] [drm:intel_display_power_get] enabling dpio-tx-b-01
[53329.151036] [drm:intel_display_power_get] enabling dpio-tx-b-23
[53329.163047] [drm:intel_display_power_get] enabling dpio-tx-c-01
[53329.177058] [drm:intel_display_power_get] enabling dpio-tx-c-23
[53329.189066] [drm:intel_display_power_get] enabling dpio-common
[53329.201074] [drm:intel_display_power_put] disabling dpio-common
[53329.213084] [drm:intel_display_power_put] disabling dpio-tx-c-23
[53329.225093] [drm:intel_display_power_put] disabling dpio-tx-c-01
[53329.237105] [drm:intel_display_power_put] disabling dpio-tx-b-23
[53329.249120] [drm:intel_display_power_put] disabling dpio-tx-b-01
[53329.263124] [drm:intel_display_power_put] disabling display
[53329.275247] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-1]
[53329.275255] [drm:intel_display_power_get] enabling display
[53329.283150] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
[53329.287144] [drm:intel_display_power_get] enabling dpio-tx-b-01
[53329.300155] [drm:intel_display_power_get] enabling dpio-tx-b-23
[53329.312168] [drm:intel_display_power_get] enabling dpio-tx-c-01
[53329.324186] [drm:intel_display_power_get] enabling dpio-tx-c-23
[53329.336191] [drm:intel_display_power_get] enabling dpio-common
[53329.349395] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
[53329.349404] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[53329.349408] [drm:intel_display_power_put] disabling dpio-common
[53329.361221] [drm:intel_display_power_put] disabling dpio-tx-c-23
[53329.373213] [drm:intel_display_power_put] disabling dpio-tx-c-01
[53329.385223] [drm:intel_display_power_put] disabling dpio-tx-b-23
[53329.397239] [drm:intel_display_power_put] disabling dpio-tx-b-01
[53329.409243] [drm:intel_display_power_put] disabling display
[53329.421337] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
[53329.421344] [drm:intel_display_power_get] enabling display
[53329.429274] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
[53329.433268] [drm:intel_display_power_get] enabling dpio-tx-b-01
[53329.446697] [drm:intel_display_power_get] enabling dpio-tx-b-23
[53329.460293] [drm:intel_display_power_get] enabling dpio-tx-c-01
[53329.472303] [drm:intel_display_power_get] enabling dpio-tx-c-23
[53329.484307] [drm:intel_display_power_get] enabling dpio-common
[53329.496609] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[53329.496617] [drm:intel_display_power_put] disabling dpio-common
[53329.508332] [drm:intel_display_power_put] disabling dpio-tx-c-23
[53329.520336] [drm:intel_display_power_put] disabling dpio-tx-c-01
[53329.532344] [drm:intel_display_power_put] disabling dpio-tx-b-23
[53329.544353] [drm:intel_display_power_put] disabling dpio-tx-b-01
[53329.556365] [drm:intel_display_power_put] disabling display
[53329.570488] [drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
[53329.570497] [drm:intel_display_power_get] enabling display
[53329.578394] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
[53329.582386] [drm:intel_display_power_get] enabling dpio-common
[53329.594397] [drm:valleyview_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x40000
[53329.598399] [drm:valleyview_crt_detect_hotplug] valleyview hotplug adpa=0x40000, result 0
[53329.598404] [drm:intel_crt_detect] CRT not detected via hotplug
[53329.598644] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[53329.598649] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[53329.598653] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[53329.598657] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[53329.598939] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[53329.598943] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[53329.598946] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[53329.598950] [drm:intel_display_power_put] disabling dpio-common
[53329.610408] [drm:intel_display_power_put] disabling display
[53329.622491] [drm:intel_dp_detect] [CONNECTOR:28:eDP-1]
[53329.622499] [drm:intel_display_power_get] enabling display
[53329.630441] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
[53329.636431] [drm:intel_display_power_get] enabling dpio-tx-b-01
[53329.648437] [drm:intel_display_power_get] enabling dpio-tx-b-23
[53329.663614] [drm:intel_display_power_get] enabling dpio-tx-c-01
[53329.675469] [drm:intel_display_power_get] enabling dpio-tx-c-23
[53329.687467] [drm:intel_display_power_get] enabling dpio-common
[53329.723508] [drm:vlv_power_sequencer_pipe] picked pipe A power sequencer for port C
[53329.723520] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 0 t8 0 t9 0 t10 0 t11_t12 4000
[53329.723526] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
[53329.723530] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 500
[53329.723534] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200
[53329.723540] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f05
[53329.747522] [drm:edp_panel_vdd_on] Turning eDP VDD on
[53329.747528] [drm:wait_panel_power_cycle] Wait for panel power cycle
[53329.747533] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000
[53330.044769] [drm:wait_panel_status] Wait complete
[53330.044782] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
[53330.044786] [drm:edp_panel_vdd_on] eDP was not running
[53330.137946] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000, dig 0x00000000
[53330.137953] [drm:intel_hpd_irq_handler] digital hpd port C - short
[53330.137977] [drm:intel_dp_hpd_pulse] got hpd irq on port C - short
[53330.317991] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
[53330.370038] [drm:intel_dp_probe_oui] Branch OUI: 000000
[53330.442807] [drm:intel_dp_detect] [CONNECTOR:24:DP-1]
[53330.492223] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-1]
[53330.518330] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
[53330.518337] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[53330.542220] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
[53330.566469] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[53330.592252] [drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
[53330.600224] [drm:valleyview_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x40000
[53330.604219] [drm:valleyview_crt_detect_hotplug] valleyview hotplug adpa=0x40000, result 0
[53330.604224] [drm:intel_crt_detect] CRT not detected via hotplug
[53330.604415] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[53330.604420] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[53330.604423] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[53330.604427] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[53330.604708] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[53330.604712] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[53330.604715] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[53330.612267] [drm:intel_dp_detect] [CONNECTOR:28:eDP-1]
[53330.735332] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
[53330.785370] [drm:intel_dp_probe_oui] Branch OUI: 000000
[53330.858075] [drm:intel_dp_detect] [CONNECTOR:24:DP-1]
[53330.907598] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-1]
[53330.930664] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
[53330.930669] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[53330.954553] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
[53330.980802] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[53331.004596] [drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
[53331.010544] [drm:valleyview_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x40000
[53331.014545] [drm:valleyview_crt_detect_hotplug] valleyview hotplug adpa=0x40000, result 0
[53331.014550] [drm:intel_crt_detect] CRT not detected via hotplug
[53331.014747] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[53331.014752] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[53331.014755] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[53331.014759] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[53331.015046] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[53331.015051] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[53331.015054] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[53331.022602] [drm:intel_dp_detect] [CONNECTOR:28:eDP-1]
[53331.120657] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
[53331.122635] [drm:valleyview_enable_rps] GPLL enabled? yes
[53331.122640] [drm:valleyview_enable_rps] GPU status: 0x0000e0d0
[53331.122644] [drm:valleyview_enable_rps] current GPU freq: 854 MHz (224)
[53331.122648] [drm:valleyview_enable_rps] setting GPU freq to 646 MHz (214)
[53331.122654] [drm:valleyview_set_rps] GPU freq request from 854 MHz (224) to 646 MHz (214)
[53331.126664] [drm:valleyview_set_rps] GPU freq request from 646 MHz (214) to 667 MHz (215)
[53331.152665] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
[53331.205719] [drm:intel_dp_probe_oui] Branch OUI: 000000
[53331.378852] [drm:valleyview_set_rps] GPU freq request from 667 MHz (215) to 687 MHz (216)
[53331.463918] [drm:valleyview_set_rps] GPU freq request from 687 MHz (216) to 729 MHz (218)
[53331.547987] [drm:valleyview_set_rps] GPU freq request from 729 MHz (218) to 812 MHz (222)
[53331.633054] [drm:valleyview_set_rps] GPU freq request from 812 MHz (222) to 854 MHz (224)
[53332.923108] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off
[53332.923119] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0000
[53332.949122] [drm:intel_display_power_put] disabling dpio-common
[53332.961143] [drm:intel_display_power_put] disabling dpio-tx-c-23
[53332.973143] [drm:intel_display_power_put] disabling dpio-tx-c-01
[53332.985152] [drm:intel_display_power_put] disabling dpio-tx-b-23
[53332.999160] [drm:intel_display_power_put] disabling dpio-tx-b-01
[53333.011170] [drm:intel_display_power_put] disabling display
[53407.151646] [drm] no progress on blitter ring
[53407.157878] [drm] GPU HANG: ecode -1:0x00000000, reason: Ring hung, action: reset
[53407.158141] [drm:i915_error_work_func] resetting chip
[53407.159471] drm/i915: Resetting chip after gpu hang
[53407.159483] [drm:init_status_page] render ring hws offset: 0x0040b000
[53407.161479] [drm:init_status_page] bsd ring hws offset: 0x0042f000
[53407.161616] [drm:init_status_page] blitter ring hws offset: 0x00452000
[53407.182001] [drm:intel_dp_detect] [CONNECTOR:24:DP-1]
[53407.182010] [drm:intel_display_power_get] enabling display
[53407.189491] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
[53407.193479] [drm:intel_display_power_get] enabling dpio-tx-b-01
[53407.205488] [drm:intel_display_power_get] enabling dpio-tx-b-23
[53407.217498] [drm:intel_display_power_get] enabling dpio-tx-c-01
[53407.229510] [drm:intel_display_power_get] enabling dpio-tx-c-23
[53407.241525] [drm:intel_display_power_get] enabling dpio-common
[53407.253536] [drm:intel_display_power_put] disabling dpio-common
[53407.265545] [drm:intel_display_power_put] disabling dpio-tx-c-23
[53407.277553] [drm:intel_display_power_put] disabling dpio-tx-c-01
[53407.289558] [drm:intel_display_power_put] disabling dpio-tx-b-23
[53407.301573] [drm:intel_display_power_put] disabling dpio-tx-b-01
[53407.313578] [drm:intel_display_power_put] disabling display
[53407.325664] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-1]
[53407.325672] [drm:intel_display_power_get] enabling display
[53407.333604] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
[53407.337598] [drm:intel_display_power_get] enabling dpio-tx-b-01
[53407.349607] [drm:intel_display_power_get] enabling dpio-tx-b-23
[53407.361616] [drm:intel_display_power_get] enabling dpio-tx-c-01
[53407.373626] [drm:intel_display_power_get] enabling dpio-tx-c-23
[53407.385641] [drm:intel_display_power_get] enabling dpio-common
[53407.397830] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
[53407.397836] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[53407.397840] [drm:intel_display_power_put] disabling dpio-common
[53407.413656] [drm:intel_display_power_put] disabling dpio-tx-c-23
[53407.425666] [drm:intel_display_power_put] disabling dpio-tx-c-01
[53407.437676] [drm:intel_display_power_put] disabling dpio-tx-b-23
[53407.449689] [drm:intel_display_power_put] disabling dpio-tx-b-01
[53407.461702] [drm:intel_display_power_put] disabling display
[53407.473761] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
[53407.473767] [drm:intel_display_power_get] enabling display
[53407.481720] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
[53407.485717] [drm:intel_display_power_get] enabling dpio-tx-b-01
[53407.497729] [drm:intel_display_power_get] enabling dpio-tx-b-23
[53407.511741] [drm:intel_display_power_get] enabling dpio-tx-c-01
[53407.523751] [drm:intel_display_power_get] enabling dpio-tx-c-23
[53407.535763] [drm:intel_display_power_get] enabling dpio-common
[53407.548054] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[53407.548059] [drm:intel_display_power_put] disabling dpio-common
[53407.559780] [drm:intel_display_power_put] disabling dpio-tx-c-23
[53407.573792] [drm:intel_display_power_put] disabling dpio-tx-c-01
[53407.585803] [drm:intel_display_power_put] disabling dpio-tx-b-23
[53407.597811] [drm:intel_display_power_put] disabling dpio-tx-b-01
[53407.609823] [drm:intel_display_power_put] disabling display
[53407.621883] [drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
[53407.621889] [drm:intel_display_power_get] enabling display
[53407.629841] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
[53407.633842] [drm:intel_display_power_get] enabling dpio-common
[53407.645851] [drm:valleyview_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x40000
[53407.649855] [drm:valleyview_crt_detect_hotplug] valleyview hotplug adpa=0x40000, result 0
[53407.649859] [drm:intel_crt_detect] CRT not detected via hotplug
[53407.650042] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[53407.650047] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[53407.650050] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[53407.650054] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[53407.650335] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[53407.650339] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[53407.650342] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[53407.650346] [drm:intel_display_power_put] disabling dpio-common
[53407.661862] [drm:intel_display_power_put] disabling display
[53407.673916] [drm:intel_dp_detect] [CONNECTOR:28:eDP-1]
[53407.673923] [drm:intel_display_power_get] enabling display
[53407.681880] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
[53407.685880] [drm:intel_display_power_get] enabling dpio-tx-b-01
[53407.697888] [drm:intel_display_power_get] enabling dpio-tx-b-23
[53407.709900] [drm:intel_display_power_get] enabling dpio-tx-c-01
[53407.721912] [drm:intel_display_power_get] enabling dpio-tx-c-23
[53407.735920] [drm:intel_display_power_get] enabling dpio-common
[53407.771949] [drm:vlv_power_sequencer_pipe] picked pipe A power sequencer for port C
[53407.771957] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 0 t8 0 t9 0 t10 0 t11_t12 4000
[53407.771962] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
[53407.771966] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 500
[53407.771970] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200
[53407.771976] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f05
[53407.795972] [drm:edp_panel_vdd_on] Turning eDP VDD on
[53407.795978] [drm:wait_panel_power_cycle] Wait for panel power cycle
[53407.795984] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000
[53408.093214] [drm:wait_panel_status] Wait complete
[53408.093222] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
[53408.093226] [drm:edp_panel_vdd_on] eDP was not running
[53408.186368] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000, dig 0x00000000
[53408.186374] [drm:intel_hpd_irq_handler] digital hpd port C - short
[53408.186391] [drm:intel_dp_hpd_pulse] got hpd irq on port C - short
[53408.368442] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
[53408.416484] [drm:intel_dp_probe_oui] Branch OUI: 000000
[53408.491145] [drm:intel_dp_detect] [CONNECTOR:24:DP-1]
[53408.540671] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-1]
[53408.564781] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
[53408.564787] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[53408.590666] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
[53408.614915] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[53408.638698] [drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
[53408.646664] [drm:valleyview_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x40000
[53408.650666] [drm:valleyview_crt_detect_hotplug] valleyview hotplug adpa=0x40000, result 0
[53408.650670] [drm:intel_crt_detect] CRT not detected via hotplug
[53408.650854] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[53408.650859] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[53408.650862] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[53408.650866] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[53408.651149] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[53408.651154] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[53408.651157] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[53408.658726] [drm:intel_dp_detect] [CONNECTOR:28:eDP-1]
[53408.782773] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
[53408.832817] [drm:intel_dp_probe_oui] Branch OUI: 000000
[53408.905491] [drm:intel_dp_detect] [CONNECTOR:24:DP-1]
[53408.954959] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-1]
[53408.979117] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
[53408.979123] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[53409.004998] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
[53409.029254] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[53409.053035] [drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
[53409.061010] [drm:valleyview_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x40000
[53409.065009] [drm:valleyview_crt_detect_hotplug] valleyview hotplug adpa=0x40000, result 0
[53409.065014] [drm:intel_crt_detect] CRT not detected via hotplug
[53409.065197] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[53409.065202] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[53409.065206] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[53409.065210] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[53409.065494] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[53409.065498] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[53409.065501] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[53409.073050] [drm:intel_dp_detect] [CONNECTOR:28:eDP-1]
[53409.171271] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
[53409.173090] [drm:valleyview_enable_rps] GPLL enabled? yes
[53409.173094] [drm:valleyview_enable_rps] GPU status: 0x0000e0d0
[53409.173098] [drm:valleyview_enable_rps] current GPU freq: 854 MHz (224)
[53409.173102] [drm:valleyview_enable_rps] setting GPU freq to 646 MHz (214)
[53409.173107] [drm:valleyview_set_rps] GPU freq request from 854 MHz (224) to 646 MHz (214)
[53409.201117] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
[53409.249165] [drm:intel_dp_probe_oui] Branch OUI: 000000
[53409.251156] [drm:valleyview_set_rps] GPU freq request from 646 MHz (214) to 667 MHz (215)
[53409.335229] [drm:valleyview_set_rps] GPU freq request from 667 MHz (215) to 708 MHz (217)
[53409.419298] [drm:valleyview_set_rps] GPU freq request from 708 MHz (217) to 791 MHz (221)
[53409.504367] [drm:valleyview_set_rps] GPU freq request from 791 MHz (221) to 854 MHz (224)
[53410.970555] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off
[53410.970564] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0000
[53410.994575] [drm:intel_display_power_put] disabling dpio-common
[53411.006586] [drm:intel_display_power_put] disabling dpio-tx-c-23
[53411.018593] [drm:intel_display_power_put] disabling dpio-tx-c-01
[53411.030606] [drm:intel_display_power_put] disabling dpio-tx-b-23
[53411.044611] [drm:intel_display_power_put] disabling dpio-tx-b-01
[53411.056621] [drm:intel_display_power_put] disabling display
[53481.223762] [drm] no progress on blitter ring
[53481.230040] [drm] GPU HANG: ecode -1:0x00000000, reason: Ring hung, action: reset
[53481.230179] [drm:i915_error_work_func] resetting chip
[53481.232537] [drm:intel_dp_detect] [CONNECTOR:24:DP-1]
[53481.232547] [drm:intel_display_power_get] enabling display
[53481.239691] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
[53481.243682] [drm:intel_display_power_get] enabling dpio-tx-b-01
[53481.247686] drm/i915: Resetting chip after gpu hang
[53481.247696] [drm:init_status_page] render ring hws offset: 0x0040b000
[53481.249700] [drm:init_status_page] bsd ring hws offset: 0x0042f000
[53481.249814] [drm:init_status_page] blitter ring hws offset: 0x00452000
[53481.253697] [drm:intel_display_power_get] enabling dpio-tx-b-23
[53481.265704] [drm:intel_display_power_get] enabling dpio-tx-c-01
[53481.277716] [drm:intel_display_power_get] enabling dpio-tx-c-23
[53481.289725] [drm:intel_display_power_get] enabling dpio-common
[53481.301737] [drm:intel_display_power_put] disabling dpio-common
[53481.315746] [drm:intel_display_power_put] disabling dpio-tx-c-23
[53481.327755] [drm:intel_display_power_put] disabling dpio-tx-c-01
[53481.339764] [drm:intel_display_power_put] disabling dpio-tx-b-23
[53481.351774] [drm:intel_display_power_put] disabling dpio-tx-b-01
[53481.363784] [drm:intel_display_power_put] disabling display
[53481.375869] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-1]
[53481.375876] [drm:intel_display_power_get] enabling display
[53481.385807] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
[53481.389802] [drm:intel_display_power_get] enabling dpio-tx-b-01
[53481.401812] [drm:intel_display_power_get] enabling dpio-tx-b-23
[53481.413822] [drm:intel_display_power_get] enabling dpio-tx-c-01
[53481.425832] [drm:intel_display_power_get] enabling dpio-tx-c-23
[53481.437841] [drm:intel_display_power_get] enabling dpio-common
[53481.450035] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
[53481.450042] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[53481.450046] [drm:intel_display_power_put] disabling dpio-common
[53481.461866] [drm:intel_display_power_put] disabling dpio-tx-c-23
[53481.475871] [drm:intel_display_power_put] disabling dpio-tx-c-01
[53481.487882] [drm:intel_display_power_put] disabling dpio-tx-b-23
[53481.499892] [drm:intel_display_power_put] disabling dpio-tx-b-01
[53481.511906] [drm:intel_display_power_put] disabling display
[53481.523967] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
[53481.523974] [drm:intel_display_power_get] enabling display
[53481.531927] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
[53481.535925] [drm:intel_display_power_get] enabling dpio-tx-b-01
[53481.547935] [drm:intel_display_power_get] enabling dpio-tx-b-23
[53481.561944] [drm:intel_display_power_get] enabling dpio-tx-c-01
[53481.573955] [drm:intel_display_power_get] enabling dpio-tx-c-23
[53481.585963] [drm:intel_display_power_get] enabling dpio-common
[53481.598252] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[53481.598257] [drm:intel_display_power_put] disabling dpio-common
[53481.609982] [drm:intel_display_power_put] disabling dpio-tx-c-23
[53481.621992] [drm:intel_display_power_put] disabling dpio-tx-c-01
[53481.634008] [drm:intel_display_power_put] disabling dpio-tx-b-23
[53481.648012] [drm:intel_display_power_put] disabling dpio-tx-b-01
[53481.660023] [drm:intel_display_power_put] disabling display
[53481.672110] [drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
[53481.672116] [drm:intel_display_power_get] enabling display
[53481.680046] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
[53481.684043] [drm:intel_display_power_get] enabling dpio-common
[53481.696053] [drm:valleyview_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x40000
[53481.700060] [drm:valleyview_crt_detect_hotplug] valleyview hotplug adpa=0x40000, result 0
[53481.700065] [drm:intel_crt_detect] CRT not detected via hotplug
[53481.700250] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[53481.700254] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[53481.700258] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[53481.700262] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[53481.700542] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[53481.700546] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[53481.700550] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[53481.700553] [drm:intel_display_power_put] disabling dpio-common
[53481.712067] [drm:intel_display_power_put] disabling display
[53481.726118] [drm:intel_dp_detect] [CONNECTOR:28:eDP-1]
[53481.726125] [drm:intel_display_power_get] enabling display
[53481.734089] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
[53481.738086] [drm:intel_display_power_get] enabling dpio-tx-b-01
[53481.750096] [drm:intel_display_power_get] enabling dpio-tx-b-23
[53481.762106] [drm:intel_display_power_get] enabling dpio-tx-c-01
[53481.775116] [drm:intel_display_power_get] enabling dpio-tx-c-23
[53481.787127] [drm:intel_display_power_get] enabling dpio-common
[53481.823159] [drm:vlv_power_sequencer_pipe] picked pipe A power sequencer for port C
[53481.823167] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 0 t8 0 t9 0 t10 0 t11_t12 4000
[53481.823172] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
[53481.823176] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 500
[53481.823180] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200
[53481.823187] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f05
[53481.849176] [drm:edp_panel_vdd_on] Turning eDP VDD on
[53481.849181] [drm:wait_panel_power_cycle] Wait for panel power cycle
[53481.849187] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000
[53482.147422] [drm:wait_panel_status] Wait complete
[53482.147429] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
[53482.147433] [drm:edp_panel_vdd_on] eDP was not running
[53482.240608] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000, dig 0x00000000
[53482.240614] [drm:intel_hpd_irq_handler] digital hpd port C - short
[53482.240636] [drm:intel_dp_hpd_pulse] got hpd irq on port C - short
[53482.422646] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
[53482.470690] [drm:intel_dp_probe_oui] Branch OUI: 000000
[53482.545338] [drm:intel_dp_detect] [CONNECTOR:24:DP-1]
[53482.592830] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-1]
[53482.618984] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
[53482.618990] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[53482.642871] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
[53482.669123] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[53482.692925] [drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
[53482.700870] [drm:valleyview_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x40000
[53482.704872] [drm:valleyview_crt_detect_hotplug] valleyview hotplug adpa=0x40000, result 0
[53482.704877] [drm:intel_crt_detect] CRT not detected via hotplug
[53482.705060] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[53482.705065] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[53482.705068] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[53482.705072] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[53482.705352] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[53482.705356] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[53482.705359] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[53482.712916] [drm:intel_dp_detect] [CONNECTOR:28:eDP-1]
[53482.834980] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
[53482.883020] [drm:intel_dp_probe_oui] Branch OUI: 000000
[53482.955648] [drm:intel_dp_detect] [CONNECTOR:24:DP-1]
[53483.005164] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-1]
[53483.031317] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
[53483.031323] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[53483.055202] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
[53483.081456] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[53483.105242] [drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
[53483.113205] [drm:valleyview_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x40000
[53483.117207] [drm:valleyview_crt_detect_hotplug] valleyview hotplug adpa=0x40000, result 0
[53483.117212] [drm:intel_crt_detect] CRT not detected via hotplug
[53483.117393] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[53483.117398] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[53483.117402] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[53483.117406] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[53483.117686] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[53483.117690] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[53483.117693] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[53483.125253] [drm:intel_dp_detect] [CONNECTOR:28:eDP-1]
[53483.247320] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
[53483.247404] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
[53483.249318] [drm:valleyview_enable_rps] GPLL enabled? yes
[53483.249323] [drm:valleyview_enable_rps] GPU status: 0x0000e0d0
[53483.249327] [drm:valleyview_enable_rps] current GPU freq: 854 MHz (224)
[53483.249330] [drm:valleyview_enable_rps] setting GPU freq to 646 MHz (214)
[53483.249335] [drm:valleyview_set_rps] GPU freq request from 854 MHz (224) to 646 MHz (214)
[53483.253323] [drm:valleyview_set_rps] GPU freq request from 646 MHz (214) to 667 MHz (215)
[53483.303360] [drm:intel_dp_probe_oui] Branch OUI: 000000
[53483.345398] [drm:valleyview_set_rps] GPU freq request from 667 MHz (215) to 708 MHz (217)
[53483.401444] [drm:valleyview_set_rps] GPU freq request from 708 MHz (217) to 791 MHz (221)
[53483.486514] [drm:valleyview_set_rps] GPU freq request from 791 MHz (221) to 854 MHz (224)
[53485.030771] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off
[53485.030779] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0000
[53485.056785] [drm:intel_display_power_put] disabling dpio-common
[53485.068794] [drm:intel_display_power_put] disabling dpio-tx-c-23
[53485.080803] [drm:intel_display_power_put] disabling dpio-tx-c-01
[53485.092816] [drm:intel_display_power_put] disabling dpio-tx-b-23
[53485.106824] [drm:intel_display_power_put] disabling dpio-tx-b-01
[53485.118834] [drm:intel_display_power_put] disabling display
[53555.271972] [drm] no progress on blitter ring
[53555.278296] [drm] GPU HANG: ecode -1:0x00000000, reason: Ring hung, action: reset
[53555.278434] [drm:i915_error_work_func] resetting chip
[53555.279885] drm/i915: Resetting chip after gpu hang
[53555.279897] [drm:init_status_page] render ring hws offset: 0x0040b000
[53555.280997] [drm:intel_dp_detect] [CONNECTOR:24:DP-1]
[53555.281006] [drm:intel_display_power_get] enabling display
[53555.281889] [drm:init_status_page] bsd ring hws offset: 0x0042f000
[53555.282051] [drm:init_status_page] blitter ring hws offset: 0x00452000
[53555.288895] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
[53555.292889] [drm:intel_display_power_get] enabling dpio-tx-b-01
[53555.304895] [drm:intel_display_power_get] enabling dpio-tx-b-23
[53555.316906] [drm:intel_display_power_get] enabling dpio-tx-c-01
[53555.328919] [drm:intel_display_power_get] enabling dpio-tx-c-23
[53555.340931] [drm:intel_display_power_get] enabling dpio-common
[53555.352942] [drm:intel_display_power_put] disabling dpio-common
[53555.366946] [drm:intel_display_power_put] disabling dpio-tx-c-23
[53555.378956] [drm:intel_display_power_put] disabling dpio-tx-c-01
[53555.390966] [drm:intel_display_power_put] disabling dpio-tx-b-23
[53555.402975] [drm:intel_display_power_put] disabling dpio-tx-b-01
[53555.414986] [drm:intel_display_power_put] disabling display
[53555.427067] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-1]
[53555.427073] [drm:intel_display_power_get] enabling display
[53555.435007] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
[53555.439008] [drm:intel_display_power_get] enabling dpio-tx-b-01
[53555.451017] [drm:intel_display_power_get] enabling dpio-tx-b-23
[53555.463033] [drm:intel_display_power_get] enabling dpio-tx-c-01
[53555.475036] [drm:intel_display_power_get] enabling dpio-tx-c-23
[53555.487050] [drm:intel_display_power_get] enabling dpio-common
[53555.499289] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
[53555.499295] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[53555.499299] [drm:intel_display_power_put] disabling dpio-common
[53555.513070] [drm:intel_display_power_put] disabling dpio-tx-c-23
[53555.525080] [drm:intel_display_power_put] disabling dpio-tx-c-01
[53555.537216] [drm:intel_display_power_put] disabling dpio-tx-b-23
[53555.549223] [drm:intel_display_power_put] disabling dpio-tx-b-01
[53555.561231] [drm:intel_display_power_put] disabling display
[53555.573321] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
[53555.573328] [drm:intel_display_power_get] enabling display
[53555.583256] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
[53555.587253] [drm:intel_display_power_get] enabling dpio-tx-b-01
[53555.599264] [drm:intel_display_power_get] enabling dpio-tx-b-23
[53555.611334] [drm:intel_display_power_get] enabling dpio-tx-c-01
[53555.623331] [drm:intel_display_power_get] enabling dpio-tx-c-23
[53555.635296] [drm:intel_display_power_get] enabling dpio-common
[53555.647585] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[53555.647591] [drm:intel_display_power_put] disabling dpio-common
[53555.661442] [drm:intel_display_power_put] disabling dpio-tx-c-23
[53555.673320] [drm:intel_display_power_put] disabling dpio-tx-c-01
[53555.685392] [drm:intel_display_power_put] disabling dpio-tx-b-23
[53555.697341] [drm:intel_display_power_put] disabling dpio-tx-b-01
[53555.709354] [drm:intel_display_power_put] disabling display
[53555.721420] [drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
[53555.721426] [drm:intel_display_power_get] enabling display
[53555.729249] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
[53555.735245] [drm:intel_display_power_get] enabling dpio-common
[53555.747413] [drm:valleyview_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x40000
[53555.751385] [drm:valleyview_crt_detect_hotplug] valleyview hotplug adpa=0x40000, result 0
[53555.751390] [drm:intel_crt_detect] CRT not detected via hotplug
[53555.751626] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[53555.751631] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[53555.751635] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[53555.751639] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[53555.751919] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[53555.751923] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[53555.751926] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[53555.751930] [drm:intel_display_power_put] disabling dpio-common
[53555.763392] [drm:intel_display_power_put] disabling display
[53555.775505] [drm:intel_dp_detect] [CONNECTOR:28:eDP-1]
[53555.775511] [drm:intel_display_power_get] enabling display
[53555.785422] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
[53555.789417] [drm:intel_display_power_get] enabling dpio-tx-b-01
[53555.801428] [drm:intel_display_power_get] enabling dpio-tx-b-23
[53555.813457] [drm:intel_display_power_get] enabling dpio-tx-c-01
[53555.825447] [drm:intel_display_power_get] enabling dpio-tx-c-23
[53555.837458] [drm:intel_display_power_get] enabling dpio-common
[53555.873487] [drm:vlv_power_sequencer_pipe] picked pipe A power sequencer for port C
[53555.873496] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 0 t8 0 t9 0 t10 0 t11_t12 4000
[53555.873501] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
[53555.873506] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 500
[53555.873509] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200
[53555.873516] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f05
[53555.897508] [drm:edp_panel_vdd_on] Turning eDP VDD on
[53555.897515] [drm:wait_panel_power_cycle] Wait for panel power cycle
[53555.897521] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000
[53556.194724] [drm:wait_panel_status] Wait complete
[53556.194736] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
[53556.194740] [drm:edp_panel_vdd_on] eDP was not running
[53556.287947] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000, dig 0x00000000
[53556.287953] [drm:intel_hpd_irq_handler] digital hpd port C - short
[53556.287975] [drm:intel_dp_hpd_pulse] got hpd irq on port C - short
[53556.467977] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
[53556.518008] [drm:intel_dp_probe_oui] Branch OUI: 000000
[53556.592664] [drm:intel_dp_detect] [CONNECTOR:24:DP-1]
[53556.640157] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-1]
[53556.666331] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
[53556.666337] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[53556.690210] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
[53556.714328] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[53556.740104] [drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
[53556.748071] [drm:valleyview_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x40000
[53556.752072] [drm:valleyview_crt_detect_hotplug] valleyview hotplug adpa=0x40000, result 0
[53556.752077] [drm:intel_crt_detect] CRT not detected via hotplug
[53556.752258] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[53556.752263] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[53556.752267] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[53556.752271] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[53556.752551] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[53556.752555] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[53556.752558] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[53556.760116] [drm:intel_dp_detect] [CONNECTOR:28:eDP-1]
[53556.882181] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
[53556.932347] [drm:intel_dp_probe_oui] Branch OUI: 000000
[53557.004836] [drm:intel_dp_detect] [CONNECTOR:24:DP-1]
[53557.054494] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-1]
[53557.080647] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
[53557.080653] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[53557.104524] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
[53557.128665] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[53557.154442] [drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
[53557.162407] [drm:valleyview_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x40000
[53557.166409] [drm:valleyview_crt_detect_hotplug] valleyview hotplug adpa=0x40000, result 0
[53557.166413] [drm:intel_crt_detect] CRT not detected via hotplug
[53557.166595] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[53557.166599] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[53557.166603] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[53557.166607] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[53557.166888] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[53557.166891] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[53557.166895] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[53557.174453] [drm:intel_dp_detect] [CONNECTOR:28:eDP-1]
[53557.296646] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
[53557.296761] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
[53557.298520] [drm:valleyview_enable_rps] GPLL enabled? yes
[53557.298525] [drm:valleyview_enable_rps] GPU status: 0x0000e0d0
[53557.298529] [drm:valleyview_enable_rps] current GPU freq: 854 MHz (224)
[53557.298533] [drm:valleyview_enable_rps] setting GPU freq to 646 MHz (214)
[53557.298537] [drm:valleyview_set_rps] GPU freq request from 854 MHz (224) to 646 MHz (214)
[53557.326545] [drm:valleyview_set_rps] GPU freq request from 646 MHz (214) to 667 MHz (215)
[53557.352702] [drm:intel_dp_probe_oui] Branch OUI: 000000
[53557.426630] [drm:valleyview_set_rps] GPU freq request from 667 MHz (215) to 708 MHz (217)
[53557.468663] [drm:valleyview_set_rps] GPU freq request from 708 MHz (217) to 791 MHz (221)
[53557.637804] [drm:valleyview_set_rps] GPU freq request from 791 MHz (221) to 812 MHz (222)
[53557.723086] [drm:valleyview_set_rps] GPU freq request from 812 MHz (222) to 854 MHz (224)
[53559.075094] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off
[53559.075104] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0000
[53559.101110] [drm:intel_display_power_put] disabling dpio-common
[53559.112992] [drm:intel_display_power_put] disabling dpio-tx-c-23
[53559.125003] [drm:intel_display_power_put] disabling dpio-tx-c-01
[53559.137012] [drm:intel_display_power_put] disabling dpio-tx-b-23
[53559.149022] [drm:intel_display_power_put] disabling dpio-tx-b-01
[53559.161035] [drm:intel_display_power_put] disabling display
[53629.340179] [drm] no progress on blitter ring
[53629.346446] [drm] GPU HANG: ecode -1:0x00000000, reason: Ring hung, action: reset
[53629.347094] [drm:i915_error_work_func] resetting chip
[53629.348883] [drm:intel_dp_detect] [CONNECTOR:24:DP-1]
[53629.348893] [drm:intel_display_power_get] enabling display
[53629.349096] drm/i915: Resetting chip after gpu hang
[53629.349110] [drm:init_status_page] render ring hws offset: 0x0040b000
[53629.351107] [drm:init_status_page] bsd ring hws offset: 0x0042f000
[53629.351300] [drm:init_status_page] blitter ring hws offset: 0x00452000
[53629.361116] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
[53629.365105] [drm:intel_display_power_get] enabling dpio-tx-b-01
[53629.377119] [drm:intel_display_power_get] enabling dpio-tx-b-23
[53629.389129] [drm:intel_display_power_get] enabling dpio-tx-c-01
[53629.401147] [drm:intel_display_power_get] enabling dpio-tx-c-23
[53629.413149] [drm:intel_display_power_get] enabling dpio-common
[53629.425162] [drm:intel_display_power_put] disabling dpio-common
[53629.437169] [drm:intel_display_power_put] disabling dpio-tx-c-23
[53629.449182] [drm:intel_display_power_put] disabling dpio-tx-c-01
[53629.461191] [drm:intel_display_power_put] disabling dpio-tx-b-23
[53629.482153] [drm:intel_display_power_put] disabling dpio-tx-b-01
[53629.493210] [drm:intel_display_power_put] disabling display
[53629.505320] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-1]
[53629.505329] [drm:intel_display_power_get] enabling display
[53629.514247] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
[53629.518234] [drm:intel_display_power_get] enabling dpio-tx-b-01
[53629.530245] [drm:intel_display_power_get] enabling dpio-tx-b-23
[53629.542251] [drm:intel_display_power_get] enabling dpio-tx-c-01
[53629.554270] [drm:intel_display_power_get] enabling dpio-tx-c-23
[53629.566276] [drm:intel_display_power_get] enabling dpio-common
[53629.580497] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
[53629.580506] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[53629.580511] [drm:intel_display_power_put] disabling dpio-common
[53629.592298] [drm:intel_display_power_put] disabling dpio-tx-c-23
[53629.604305] [drm:intel_display_power_put] disabling dpio-tx-c-01
[53629.616314] [drm:intel_display_power_put] disabling dpio-tx-b-23
[53629.628323] [drm:intel_display_power_put] disabling dpio-tx-b-01
[53629.640334] [drm:intel_display_power_put] disabling display
[53629.652457] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
[53629.652466] [drm:intel_display_power_get] enabling display
[53629.662358] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
[53629.666355] [drm:intel_display_power_get] enabling dpio-tx-b-01
[53629.678381] [drm:intel_display_power_get] enabling dpio-tx-b-23
[53629.690383] [drm:intel_display_power_get] enabling dpio-tx-c-01
[53629.702382] [drm:intel_display_power_get] enabling dpio-tx-c-23
[53629.714395] [drm:intel_display_power_get] enabling dpio-common
[53629.726687] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[53629.726693] [drm:intel_display_power_put] disabling dpio-common
[53629.738415] [drm:intel_display_power_put] disabling dpio-tx-c-23
[53629.750426] [drm:intel_display_power_put] disabling dpio-tx-c-01
[53629.764431] [drm:intel_display_power_put] disabling dpio-tx-b-23
[53629.776445] [drm:intel_display_power_put] disabling dpio-tx-b-01
[53629.788454] [drm:intel_display_power_put] disabling display
[53629.800571] [drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
[53629.800577] [drm:intel_display_power_get] enabling display
[53629.808480] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
[53629.812475] [drm:intel_display_power_get] enabling dpio-common
[53629.824484] [drm:valleyview_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x40000
[53629.828487] [drm:valleyview_crt_detect_hotplug] valleyview hotplug adpa=0x40000, result 0
[53629.828492] [drm:intel_crt_detect] CRT not detected via hotplug
[53629.828676] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[53629.828681] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[53629.828685] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[53629.828689] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[53629.828970] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[53629.828974] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[53629.828977] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[53629.828981] [drm:intel_display_power_put] disabling dpio-common
[53629.841494] [drm:intel_display_power_put] disabling display
[53629.853570] [drm:intel_dp_detect] [CONNECTOR:28:eDP-1]
[53629.853577] [drm:intel_display_power_get] enabling display
[53629.861519] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
[53629.865515] [drm:intel_display_power_get] enabling dpio-tx-b-01
[53629.877524] [drm:intel_display_power_get] enabling dpio-tx-b-23
[53629.889534] [drm:intel_display_power_get] enabling dpio-tx-c-01
[53629.901543] [drm:intel_display_power_get] enabling dpio-tx-c-23
[53629.913556] [drm:intel_display_power_get] enabling dpio-common
[53629.951586] [drm:vlv_power_sequencer_pipe] picked pipe A power sequencer for port C
[53629.951594] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 0 t8 0 t9 0 t10 0 t11_t12 4000
[53629.951599] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
[53629.951604] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 500
[53629.951607] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200
[53629.951614] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f05
[53629.975604] [drm:edp_panel_vdd_on] Turning eDP VDD on
[53629.975611] [drm:wait_panel_power_cycle] Wait for panel power cycle
[53629.975617] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000
[53630.272852] [drm:wait_panel_status] Wait complete
[53630.272865] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
[53630.272869] [drm:edp_panel_vdd_on] eDP was not running
[53630.366020] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000, dig 0x00000000
[53630.366027] [drm:intel_hpd_irq_handler] digital hpd port C - short
[53630.366049] [drm:intel_dp_hpd_pulse] got hpd irq on port C - short
[53630.548078] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
[53630.597115] [drm:intel_dp_probe_oui] Branch OUI: 000000
[53630.671838] [drm:intel_dp_detect] [CONNECTOR:24:DP-1]
[53630.722335] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-1]
[53630.746415] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
[53630.746422] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[53630.772319] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
[53630.796556] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[53630.820385] [drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
[53630.828303] [drm:valleyview_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x40000
[53630.832309] [drm:valleyview_crt_detect_hotplug] valleyview hotplug adpa=0x40000, result 0
[53630.832315] [drm:intel_crt_detect] CRT not detected via hotplug
[53630.832502] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[53630.832507] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[53630.832511] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[53630.832514] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[53630.832796] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[53630.832800] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[53630.832804] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[53630.840430] [drm:intel_dp_detect] [CONNECTOR:28:eDP-1]
[53630.962421] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
[53631.010456] [drm:intel_dp_probe_oui] Branch OUI: 000000
[53631.083241] [drm:intel_dp_detect] [CONNECTOR:24:DP-1]
[53631.132607] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-1]
[53631.158746] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
[53631.158752] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[53631.182640] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
[53631.206891] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[53631.232680] [drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
[53631.240641] [drm:valleyview_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x40000
[53631.244640] [drm:valleyview_crt_detect_hotplug] valleyview hotplug adpa=0x40000, result 0
[53631.244645] [drm:intel_crt_detect] CRT not detected via hotplug
[53631.244829] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[53631.244834] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[53631.244837] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[53631.244842] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[53631.245122] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[53631.245126] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[53631.245129] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[53631.250685] [drm:intel_dp_detect] [CONNECTOR:28:eDP-1]
[53631.348818] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
[53631.350727] [drm:valleyview_enable_rps] GPLL enabled? yes
[53631.350732] [drm:valleyview_enable_rps] GPU status: 0x0000e0d0
[53631.350737] [drm:valleyview_enable_rps] current GPU freq: 854 MHz (224)
[53631.350740] [drm:valleyview_enable_rps] setting GPU freq to 646 MHz (214)
[53631.350745] [drm:valleyview_set_rps] GPU freq request from 854 MHz (224) to 646 MHz (214)
[53631.376756] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
[53631.378751] [drm:valleyview_set_rps] GPU freq request from 646 MHz (214) to 667 MHz (215)
[53631.428787] [drm:intel_dp_probe_oui] Branch OUI: 000000
[53631.563910] [drm:valleyview_set_rps] GPU freq request from 667 MHz (215) to 687 MHz (216)
[53631.590969] [drm:intel_crtc_set_config] [CRTC:8] [FB:35] #connectors=1 (x y) (0 0)
[53631.590980] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=1, fb_changed=0
[53631.590985] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8]
[53631.590991] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[53631.590996] [drm:connected_sink_compute_bpp] [CONNECTOR:28:eDP-1] checking for sink bpp constrains
[53631.591000] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18
[53631.591007] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 0a pixel clock 71000KHz
[53631.591012] [drm:intel_dp_compute_config] DP link bw 0a lane count 1 clock 270000 bpp 18
[53631.591016] [drm:intel_dp_compute_config] DP link bw required 127800 available 216000
[53631.591021] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1
[53631.591025] [drm:intel_dump_pipe_config] [CRTC:8][modeset] config for pipe A
[53631.591029] [drm:intel_dump_pipe_config] cpu_transcoder: A
[53631.591032] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
[53631.591037] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[53631.591041] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 2481629, gmch_n: 4194304, link_m: 137868, link_n: 524288, tu: 64
[53631.591046] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[53631.591049] [drm:intel_dump_pipe_config] requested mode:
[53631.591055] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 71000 1366 1404 1426 1482 768 771 777 798 0x48 0xa
[53631.591059] [drm:intel_dump_pipe_config] adjusted mode:
[53631.591064] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 71000 1366 1404 1426 1482 768 771 777 798 0x48 0xa
[53631.591070] [drm:intel_dump_crtc_timings] crtc timings: 71000 1366 1404 1426 1482 768 771 777 798, type: 0x48 flags: 0xa
[53631.591073] [drm:intel_dump_pipe_config] port clock: 270000
[53631.591077] [drm:intel_dump_pipe_config] pipe src size: 1366x768
[53631.591081] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[53631.591085] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[53631.591088] [drm:intel_dump_pipe_config] ips: 0
[53631.591091] [drm:intel_dump_pipe_config] double wide: 0
[53631.763057] [drm:intel_edp_panel_on] Turn eDP power on
[53631.787077] [drm:wait_panel_power_cycle] Wait for panel power cycle
[53631.787084] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008
[53631.787088] [drm:wait_panel_status] Wait complete
[53631.787092] [drm:wait_panel_on] Wait for panel power on
[53631.787097] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b
[53631.787167] [drm:valleyview_set_rps] GPU freq request from 687 MHz (216) to 167 MHz (191)
[53631.941569] [drm:wait_panel_status] Wait complete
[53631.989381] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off
[53631.989389] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
[53632.085456] [drm:edp_panel_vdd_on] Turning eDP VDD on
[53632.085465] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
[53632.219561] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
[53632.315643] [drm:intel_dp_start_link_train] clock recovery OK
[53632.411722] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
[53632.459809] [drm:g4x_check_srwm] SR watermark: display plane 56, cursor 2
[53632.459814] [drm:g4x_check_srwm] SR watermark: display plane 109, cursor 2
[53632.459820] [drm:valleyview_update_wm] Setting FIFO watermarks - A: plane=109, cursor=2, B: plane=2, cursor=2, SR: plane=56, cursor=2
[53632.459825] [drm:intel_set_memory_cxsr] memory self-refresh is enabled
[53632.459832] [drm:intel_edp_backlight_on] 
[53632.459836] [drm:intel_panel_enable_backlight] pipe A
[53632.459841] [drm:intel_panel_actually_set_backlight] set backlight PWM = 3906
[53632.507809] [drm:i9xx_update_primary_plane] Writing base 00475000 00000000 0 0 5504
[53632.507823] [drm:intel_connector_check_state] [CONNECTOR:28:eDP-1]
[53632.507832] [drm:check_encoder_state] [ENCODER:17:DAC-17]
[53632.507836] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
[53632.507841] [drm:check_encoder_state] [ENCODER:23:TMDS-23]
[53632.507845] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
[53632.507849] [drm:check_encoder_state] [ENCODER:27:TMDS-27]
[53632.507854] [drm:check_crtc_state] [CRTC:8]
[53632.509669] [drm:check_crtc_state] [CRTC:13]
[53632.509678] [drm:intel_crtc_set_config] [CRTC:13] [NOFB]
[53632.509683] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0
[53632.509688] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8]
[53633.151325] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off
[53633.151334] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007