[ 10.016404] initcall azx_driver_init+0x0/0x20 [snd_hda_intel] returned 0 after 23664 usecs [ 10.043481] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB2 [ 10.052169] option 1-3:1.5: GSM modem (1-port) converter detected [ 10.059705] calling patch_realtek_init+0x0/0x12 [snd_hda_codec_realtek] @ 2463 [ 10.059729] initcall patch_realtek_init+0x0/0x12 [snd_hda_codec_realtek] returned 0 after 5 usecs [ 10.062669] sound hdaudioC0D0: autoconfig: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line [ 10.070131] sound hdaudioC0D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 10.077631] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 10.085046] sound hdaudioC0D0: mono: mono_out=0x0 [ 10.092414] sound hdaudioC0D0: dig-out=0x1e/0x0 [ 10.093013] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 10.107016] sound hdaudioC0D0: inputs: [ 10.114296] sound hdaudioC0D0: Internal Mic=0x12 [ 10.121570] sound hdaudioC0D0: Rear Mic=0x19 [ 10.123505] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB3 [ 10.123782] initcall usb_serial_module_init+0x0/0x20 [option] returned 0 after 179086 usecs [ 10.136533] sound hdaudioC0D0: Front Mic=0x18 [ 10.143812] sound hdaudioC0D0: Line=0x1a [ 10.161108] dracut: Mounted root filesystem /dev/sda3 [ 10.266220] [drm:intel_crtc_set_config] [CRTC:13] [FB:39] #connectors=1 (x y) (0 0) [ 10.266343] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0 [ 10.266349] [drm:intel_modeset_stage_output_state] [CONNECTOR:29:eDP-1] to [CRTC:13] [ 10.266355] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 10.266384] [drm:connected_sink_compute_bpp] [CONNECTOR:29:eDP-1] checking for sink bpp constrains [ 10.266391] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 10.266407] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 10.266410] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 10.266415] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 10.266419] [drm:intel_dump_pipe_config] [CRTC:13][modeset] config for pipe B [ 10.266421] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 10.266424] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 10.266428] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 10.266433] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 10.266436] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 10.266439] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 10.266441] [drm:intel_dump_pipe_config] requested mode: [ 10.266448] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 10.266450] [drm:intel_dump_pipe_config] adjusted mode: [ 10.266455] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 10.266460] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 10.266672] [drm:intel_dump_pipe_config] port clock: 270000 [ 10.266675] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 10.266679] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 10.266682] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 10.266684] [drm:intel_dump_pipe_config] ips: 0 [ 10.266687] [drm:intel_dump_pipe_config] double wide: 0 [ 10.305120] calling iTCO_vendor_init_module+0x0/0x1c [iTCO_vendor_support] @ 2205 [ 10.305132] iTCO_vendor_support: vendor-support=0 [ 10.312295] initcall iTCO_vendor_init_module+0x0/0x1c [iTCO_vendor_support] returned 0 after 6985 usecs [ 10.315802] calling iTCO_wdt_init_module+0x0/0x2e [iTCO_wdt] @ 2205 [ 10.315811] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 10.324241] iTCO_wdt: Found a Braswell SoC TCO device (Version=3, TCOBASE=0x0460) [ 10.328537] calling dm_init+0x0/0x46 [dm_mod] @ 2482 [ 10.330845] device-mapper: uevent: version 1.0.3 [ 10.340053] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com [ 10.345249] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 10.345808] initcall iTCO_wdt_init_module+0x0/0x2e [iTCO_wdt] returned 0 after 29282 usecs [ 10.353706] initcall dm_init+0x0/0x46 [dm_mod] returned 0 after 24554 usecs [ 10.615271] dracut: Switching root [ 10.848873] random: init urandom read with 44 bits of entropy available [ 11.025955] init: plymouth-upstart-bridge main process (2506) terminated with status 1 [ 11.033138] init: plymouth-upstart-bridge main process ended, respawning [ 11.089564] init: ureadahead main process (2509) terminated with status 5 [ 11.097549] init: plymouth-upstart-bridge main process (2516) terminated with status 1 [ 11.104652] init: plymouth-upstart-bridge main process ended, respawning [ 11.201431] sound hdaudioC0D2: autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line [ 11.208476] sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 11.215542] sound hdaudioC0D2: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 11.222536] sound hdaudioC0D2: mono: mono_out=0x0 [ 11.229470] sound hdaudioC0D2: dig-out=0x5/0x7 [ 11.236363] sound hdaudioC0D2: inputs: [ 12.183225] systemd-udevd[2638]: starting version 204 [ 13.260833] [drm:intel_crtc_set_config] [CRTC:13] [FB:39] #connectors=1 (x y) (0 0) [ 13.260940] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0 [ 13.260944] [drm:intel_modeset_stage_output_state] [CONNECTOR:29:eDP-1] to [CRTC:13] [ 13.260950] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 13.260980] [drm:connected_sink_compute_bpp] [CONNECTOR:29:eDP-1] checking for sink bpp constrains [ 13.260987] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 13.261003] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 13.261006] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 13.261012] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 13.261015] [drm:intel_dump_pipe_config] [CRTC:13][modeset] config for pipe B [ 13.261018] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 13.261020] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 13.261024] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 13.261029] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 13.261032] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 13.261035] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 13.261037] [drm:intel_dump_pipe_config] requested mode: [ 13.261044] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 13.261046] [drm:intel_dump_pipe_config] adjusted mode: [ 13.261051] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 13.261056] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 13.261059] [drm:intel_dump_pipe_config] port clock: 270000 [ 13.261061] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 13.261065] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 13.261068] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 13.261070] [drm:intel_dump_pipe_config] ips: 0 [ 13.261072] [drm:intel_dump_pipe_config] double wide: 0 [ 13.552543] [drm:i915_gem_open] [ 13.553020] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 13.553125] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 13.553134] [drm:intel_modeset_stage_output_state] [CONNECTOR:29:eDP-1] to [CRTC:13] [ 13.553143] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 13.553178] [drm:intel_crtc_set_config] [CRTC:13] [FB:39] #connectors=1 (x y) (0 0) [ 13.553255] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0 [ 13.553262] [drm:intel_modeset_stage_output_state] [CONNECTOR:29:eDP-1] to [CRTC:13] [ 13.553269] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 13.553298] [drm:connected_sink_compute_bpp] [CONNECTOR:29:eDP-1] checking for sink bpp constrains [ 13.553308] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 13.553326] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 13.553332] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 13.553340] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 13.553346] [drm:intel_dump_pipe_config] [CRTC:13][modeset] config for pipe B [ 13.553351] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 13.553357] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 13.553364] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 13.553371] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 13.553377] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 13.553383] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 13.553387] [drm:intel_dump_pipe_config] requested mode: [ 13.553396] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 13.553401] [drm:intel_dump_pipe_config] adjusted mode: [ 13.553410] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 13.553418] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 13.553423] [drm:intel_dump_pipe_config] port clock: 270000 [ 13.553429] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 13.553435] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 13.553441] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 13.553446] [drm:intel_dump_pipe_config] ips: 0 [ 13.553451] [drm:intel_dump_pipe_config] double wide: 0 [ 13.553496] [drm:intel_crtc_set_config] [CRTC:18] [NOFB] [ 13.553579] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:18], mode_changed=0, fb_changed=0 [ 13.553586] [drm:intel_modeset_stage_output_state] [CONNECTOR:29:eDP-1] to [CRTC:13] [ 13.553593] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 13.553867] [drm:i915_gem_open] [ 13.554270] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 13.554365] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 13.554373] [drm:intel_modeset_stage_output_state] [CONNECTOR:29:eDP-1] to [CRTC:13] [ 13.554381] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 13.554443] [drm:intel_crtc_set_config] [CRTC:13] [FB:39] #connectors=1 (x y) (0 0) [ 13.554519] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0 [ 13.554527] [drm:intel_modeset_stage_output_state] [CONNECTOR:29:eDP-1] to [CRTC:13] [ 13.554534] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 13.554564] [drm:connected_sink_compute_bpp] [CONNECTOR:29:eDP-1] checking for sink bpp constrains [ 13.554574] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 13.554591] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 13.554597] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 13.554604] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 13.554701] [drm:intel_dump_pipe_config] [CRTC:13][modeset] config for pipe B [ 13.554708] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 13.554713] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 13.554720] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 13.554727] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 13.554733] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 13.554739] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 13.554744] [drm:intel_dump_pipe_config] requested mode: [ 13.554753] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 13.554758] [drm:intel_dump_pipe_config] adjusted mode: [ 13.554766] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 13.554774] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 13.554780] [drm:intel_dump_pipe_config] port clock: 270000 [ 13.554785] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 13.554791] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 13.554797] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 13.554803] [drm:intel_dump_pipe_config] ips: 0 [ 13.554808] [drm:intel_dump_pipe_config] double wide: 0 [ 13.554851] [drm:intel_crtc_set_config] [CRTC:18] [NOFB] [ 13.554928] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:18], mode_changed=0, fb_changed=0 [ 13.554935] [drm:intel_modeset_stage_output_state] [CONNECTOR:29:eDP-1] to [CRTC:13] [ 13.554943] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 13.555171] [drm:i915_gem_open] [ 13.556099] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[5] [ 13.556178] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[5] [ 13.556215] [drm:drm_mode_getconnector] [CONNECTOR:29:?] [ 13.556242] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:eDP-1] [ 13.556250] [drm:intel_dp_detect] [CONNECTOR:29:eDP-1] [ 13.560034] [drm:edp_panel_vdd_on] Turning eDP port C VDD on [ 13.560056] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 13.560905] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 13.563390] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 13.568846] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 13.568874] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:eDP-1] probed modes : [ 13.568886] [drm:drm_mode_debug_printmodeline] Modeline 30:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 13.568969] [drm:drm_mode_getconnector] [CONNECTOR:29:?] [ 13.620026] [drm:drm_mode_getconnector] [CONNECTOR:22:?] [ 13.620045] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-1] [ 13.620053] [drm:intel_hdmi_detect] [CONNECTOR:22:HDMI-A-1] [ 13.635390] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 13.635404] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 13.639837] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-1] disconnected [ 13.640047] [drm:drm_mode_getconnector] [CONNECTOR:22:?] [ 13.640060] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-1] [ 13.640067] [drm:intel_hdmi_detect] [CONNECTOR:22:HDMI-A-1] [ 13.647663] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 13.647675] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 13.657369] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-1] disconnected [ 13.657413] [drm:drm_mode_getconnector] [CONNECTOR:27:?] [ 13.657427] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1] [ 13.657433] [drm:intel_dp_detect] [CONNECTOR:27:DP-1] [ 13.664705] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1] disconnected [ 13.664737] [drm:drm_mode_getconnector] [CONNECTOR:27:?] [ 13.664749] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1] [ 13.664755] [drm:intel_dp_detect] [CONNECTOR:27:DP-1] [ 13.672718] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1] disconnected [ 13.672762] [drm:drm_mode_getconnector] [CONNECTOR:35:?] [ 13.672775] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] [ 13.672781] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-2] [ 13.676988] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 r(1) [ 13.677001] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel [ 13.680859] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] disconnected [ 13.680888] [drm:drm_mode_getconnector] [CONNECTOR:35:?] [ 13.680902] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] [ 13.680908] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-2] [ 13.689370] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 r(1) [ 13.689384] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel [ 13.692723] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] disconnected [ 13.692768] [drm:drm_mode_getconnector] [CONNECTOR:37:?] [ 13.692780] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:DP-2] [ 13.692786] [drm:intel_dp_detect] [CONNECTOR:37:DP-2] [ 13.704697] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:DP-2] disconnected [ 13.704727] [drm:drm_mode_getconnector] [CONNECTOR:37:?] [ 13.704740] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:DP-2] [ 13.704746] [drm:intel_dp_detect] [CONNECTOR:37:DP-2] [ 13.716864] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:DP-2] disconnected [ 13.717609] [drm:add_framebuffer_internal] [FB:40] [ 13.916931] systemd-udevd[2822]: could not open moddep file '/lib/modules/3.18.0-rc5_drm-intel-testing_167896_20141122_+/modules.dep.bin' [ 14.072765] Adding 1952764k swap on /dev/sda2. Priority:-1 extents:1 across:1952764k SS [ 14.150923] asix 1-6.2.4:1.0 eth1: renamed from eth0 [ 14.170191] systemd-udevd[2726]: renamed network interface eth0 to eth1 [ 14.420245] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro [ 15.455071] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE [ 15.661877] init: statd-mounting (/lib/modules/3.18.0-rc5_drm-intel-testing_167896_20141122_+) main process (3317) killed by TERM signal [ 16.416503] init: idmapd-mounting (/lib/modules/3.18.0-rc5_drm-intel-testing_167896_20141122_+) main process (3312) killed by TERM signal [ 16.422325] init: failsafe main process (3514) killed by TERM signal [ 16.569932] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off [ 16.569955] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 17.245062] init: bluetooth main process (3583) terminated with status 1 [ 17.245170] init: bluetooth main process ended, respawning [ 17.799787] asix 1-6.2.4:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 18.028537] asix 1-6.2.4:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 18.431612] init: bluetooth main process (3740) terminated with status 1 [ 18.431723] init: bluetooth main process ended, respawning [ 18.478756] init: alsa-restore main process (3758) terminated with status 99 [ 19.669976] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 19.670086] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 19.670095] [drm:intel_modeset_stage_output_state] [CONNECTOR:29:eDP-1] to [CRTC:13] [ 19.670104] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 19.670146] [drm:intel_crtc_set_config] [CRTC:13] [FB:39] #connectors=1 (x y) (0 0) [ 19.670226] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0 [ 19.670234] [drm:intel_modeset_stage_output_state] [CONNECTOR:29:eDP-1] to [CRTC:13] [ 19.670241] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 19.670277] [drm:connected_sink_compute_bpp] [CONNECTOR:29:eDP-1] checking for sink bpp constrains [ 19.670287] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 19.670305] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 19.670311] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 19.670319] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 19.670326] [drm:intel_dump_pipe_config] [CRTC:13][modeset] config for pipe B [ 19.670331] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 19.670337] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 19.670343] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 19.670351] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 19.670357] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 19.670363] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 19.670367] [drm:intel_dump_pipe_config] requested mode: [ 19.670377] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 19.670382] [drm:intel_dump_pipe_config] adjusted mode: [ 19.670391] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 19.670400] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 19.670405] [drm:intel_dump_pipe_config] port clock: 270000 [ 19.670410] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 19.670417] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 19.670422] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 19.670428] [drm:intel_dump_pipe_config] ips: 0 [ 19.670433] [drm:intel_dump_pipe_config] double wide: 0 [ 19.670480] [drm:intel_crtc_set_config] [CRTC:18] [NOFB] [ 19.670561] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:18], mode_changed=0, fb_changed=0 [ 19.670568] [drm:intel_modeset_stage_output_state] [CONNECTOR:29:eDP-1] to [CRTC:13] [ 19.670576] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 19.670838] [drm:intel_crtc_set_config] [CRTC:13] [FB:39] #connectors=1 (x y) (0 0) [ 19.671025] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0 [ 19.671029] [drm:intel_modeset_stage_output_state] [CONNECTOR:29:eDP-1] to [CRTC:13] [ 19.671034] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 19.671061] [drm:connected_sink_compute_bpp] [CONNECTOR:29:eDP-1] checking for sink bpp constrains [ 19.671068] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 19.671081] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 19.671084] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 19.671090] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 19.671094] [drm:intel_dump_pipe_config] [CRTC:13][modeset] config for pipe B [ 19.671097] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 19.671099] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 19.671103] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 19.671108] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 19.671111] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 19.671119] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 19.671125] [drm:intel_dump_pipe_config] requested mode: [ 19.671136] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 19.671142] [drm:intel_dump_pipe_config] adjusted mode: [ 19.671150] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 19.671160] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 19.671167] [drm:intel_dump_pipe_config] port clock: 270000 [ 19.671172] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 19.671178] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 19.671184] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 19.671188] [drm:intel_dump_pipe_config] ips: 0 [ 19.671193] [drm:intel_dump_pipe_config] double wide: 0 [ 19.775620] init: plymouth-upstart-bridge main process ended, respawning [ 20.007598] init: bluetooth main process (3937) terminated with status 1 [ 20.007702] init: bluetooth main process ended, respawning [ 20.663572] random: nonblocking pool is initialized [ 20.762697] calling rfkill_init+0x0/0x78 [rfkill] @ 4097 [ 20.769796] initcall rfkill_init+0x0/0x78 [rfkill] returned 0 after 6905 usecs [ 20.870212] calling bt_init+0x0/0xaa [bluetooth] @ 4114 [ 20.870224] Bluetooth: Core ver 2.19 [ 20.870549] NET: Registered protocol family 31 [ 20.870556] Bluetooth: HCI device and connection manager initialized [ 20.870820] Bluetooth: HCI socket layer initialized [ 20.870866] Bluetooth: L2CAP socket layer initialized [ 20.871650] Bluetooth: SCO socket layer initialized [ 20.871733] initcall bt_init+0x0/0xaa [bluetooth] returned 0 after 1451 usecs [ 20.918083] calling rfcomm_init+0x0/0xee [rfcomm] @ 4127 [ 20.918624] Bluetooth: RFCOMM TTY layer initialized [ 20.918687] Bluetooth: RFCOMM socket layer initialized [ 20.918760] Bluetooth: RFCOMM ver 1.11 [ 20.918824] initcall rfcomm_init+0x0/0xee [rfcomm] returned 0 after 703 usecs [ 112.088748] calling inet6_init+0x0/0x2fd [ipv6] @ 4151 [ 112.096732] NET: Registered protocol family 10 [ 112.108886] initcall inet6_init+0x0/0x2fd [ipv6] returned 0 after 19615 usecs [ 196.458199] PM: Syncing filesystems ... done. [ 196.665238] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 196.667932] PM: Marking nosave pages: [mem 0x00000000-0x00000fff] [ 196.667942] PM: Marking nosave pages: [mem 0x0008f000-0x0008ffff] [ 196.667948] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff] [ 196.667958] PM: Marking nosave pages: [mem 0x20000000-0x201fffff] [ 196.667981] PM: Marking nosave pages: [mem 0x7accd000-0x7b80cfff] [ 196.668086] PM: Marking nosave pages: [mem 0x7b80e000-0x7b80efff] [ 196.668091] PM: Marking nosave pages: [mem 0x7b812000-0x7b812fff] [ 196.668095] PM: Marking nosave pages: [mem 0x7c000000-0xffffffff] [ 196.673004] PM: Basic memory bitmaps created [ 196.674175] PM: Preallocating image memory... done (allocated 94565 pages) [ 197.305143] PM: Allocated 378260 kbytes in 0.63 seconds (600.41 MB/s) [ 197.305150] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done. [ 197.311583] Suspending console(s) (use no_console_suspend to debug) [ 197.312794] calling input12+ @ 4224, parent: pcspkr [ 197.312815] call input12+ returned 0 after 10 usecs [ 197.312834] calling iTCO_wdt+ @ 4224, parent: 0000:00:1f.0 [ 197.312846] call iTCO_wdt+ returned 0 after 4 usecs [ 197.313219] calling 1-6.2.4+ @ 28, parent: 1-6.2 [ 197.313438] calling input11+ @ 4224, parent: 0003:0461:0010.0002 [ 197.314371] call input11+ returned 0 after 903 usecs [ 197.314436] calling 1-6.5+ @ 1042, parent: 1-6 [ 197.314450] call 1-6.5+ returned 0 after 8 usecs [ 197.314529] calling input10+ @ 4224, parent: 0003:0461:0010.0001 [ 197.314567] call input10+ returned 0 after 30 usecs [ 197.314677] calling input9+ @ 4224, parent: LNXVIDEO:00 [ 197.314744] call input9+ returned 0 after 60 usecs [ 197.314747] calling 1-6.1+ @ 1454, parent: 1-6 [ 197.314808] calling intel_backlight+ @ 4224, parent: card0-eDP-1 [ 197.314938] call intel_backlight+ returned 0 after 121 usecs [ 197.314968] calling i2c-8+ @ 4224, parent: 0000:00:02.0 [ 197.314974] call i2c-8+ returned 0 after 1 usecs [ 197.314989] calling card0-DP-2+ @ 4224, parent: card0 [ 197.314996] call card0-DP-2+ returned 0 after 2 usecs [ 197.315008] calling card0-HDMI-A-2+ @ 4224, parent: card0 [ 197.315013] call card0-HDMI-A-2+ returned 0 after 1 usecs [ 197.315038] calling i2c-7+ @ 4224, parent: 0000:00:02.0 [ 197.315043] call i2c-7+ returned 0 after 1 usecs [ 197.315056] calling card0-eDP-1+ @ 4224, parent: card0 [ 197.315061] call card0-eDP-1+ returned 0 after 1 usecs [ 197.315084] calling i2c-6+ @ 4224, parent: 0000:00:02.0 [ 197.315089] call i2c-6+ returned 0 after 1 usecs [ 197.315102] calling card0-DP-1+ @ 4224, parent: card0 [ 197.315107] call card0-DP-1+ returned 0 after 1 usecs [ 197.315120] calling card0-HDMI-A-1+ @ 4224, parent: card0 [ 197.315125] call card0-HDMI-A-1+ returned 0 after 1 usecs [ 197.315615] call 1-6.2.4+ returned 0 after 2324 usecs [ 197.315716] calling 1-6.2+ @ 1042, parent: 1-6 [ 197.315814] calling i2c-5+ @ 4224, parent: 0000:00:02.0 [ 197.315820] call i2c-5+ returned 0 after 1 usecs [ 197.315934] calling i2c-4+ @ 4224, parent: 0000:00:02.0 [ 197.315940] call i2c-4+ returned 0 after 1 usecs [ 197.315964] calling i2c-3+ @ 4224, parent: 0000:00:02.0 [ 197.315969] call i2c-3+ returned 0 after 1 usecs [ 197.315997] calling i2c-2+ @ 4224, parent: 0000:00:02.0 [ 197.316003] call i2c-2+ returned 0 after 1 usecs [ 197.316027] calling i2c-1+ @ 4224, parent: 0000:00:02.0 [ 197.316032] call i2c-1+ returned 0 after 1 usecs [ 197.316058] calling i2c-0+ @ 4224, parent: 0000:00:02.0 [ 197.316063] call i2c-0+ returned 0 after 1 usecs [ 197.316081] calling card0+ @ 4224, parent: 0000:00:02.0 [ 197.316088] call card0+ returned 0 after 2 usecs [ 197.316103] calling renderD128+ @ 4224, parent: 0000:00:02.0 [ 197.316109] call renderD128+ returned 0 after 2 usecs [ 197.316124] calling controlD64+ @ 4224, parent: 0000:00:02.0 [ 197.316129] call controlD64+ returned 0 after 1 usecs [ 197.316159] calling input7+ @ 4224, parent: LNXPWRBN:00 [ 197.316206] call input7+ returned 0 after 40 usecs [ 197.316280] calling input6+ @ 4224, parent: PNP0C0E:00 [ 197.316325] call input6+ returned 0 after 38 usecs [ 197.316385] calling input5+ @ 4224, parent: PNP0C0C:00 [ 197.316425] call input5+ returned 0 after 33 usecs [ 197.316494] calling input3+ @ 4224, parent: PNP0C0D:00 [ 197.316501] call input3+ returned 0 after 2 usecs [ 197.316519] calling input2+ @ 4224, parent: serio0 [ 197.316556] call input2+ returned 0 after 30 usecs [ 197.316818] calling 1-5+ @ 28, parent: usb1 [ 197.316834] call 1-5+ returned 0 after 9 usecs [ 197.317528] call 1-6.2+ returned 0 after 1761 usecs [ 197.317542] calling rtc0+ @ 4224, parent: 00:07 [ 197.317549] call rtc0+ returned 0 after 1 usecs [ 197.317597] calling i8042+ @ 4224, parent: platform [ 197.317602] call i8042+ returned 0 after 1 usecs [ 197.317614] calling 1:0:0:0+ @ 1042, parent: target1:0:0 [ 197.317639] call 1:0:0:0+ returned 0 after 20 usecs [ 197.317698] calling 1-3+ @ 6, parent: usb1 [ 197.317777] call 1-3+ returned 0 after 71 usecs [ 197.317873] calling usb2+ @ 6, parent: 0000:00:14.0 [ 197.317879] call usb2+ returned 0 after 1 usecs [ 197.317945] calling target1:0:0+ @ 28, parent: host1 [ 197.317951] call target1:0:0+ returned 0 after 1 usecs [ 197.318252] calling host1+ @ 4239, parent: ata2 [ 197.318258] call host1+ returned 0 after 1 usecs [ 197.318288] calling host0+ @ 4239, parent: ata1 [ 197.318293] call host0+ returned 0 after 1 usecs [ 197.318383] calling ata2+ @ 4239, parent: 0000:00:13.0 [ 197.318458] calling ata1+ @ 28, parent: 0000:00:13.0 [ 197.319181] call 1-6.1+ returned 0 after 4320 usecs [ 197.319223] calling 1-6+ @ 1043, parent: usb1 [ 197.319344] call ata1+ returned 0 after 859 usecs [ 197.319391] call 1-6+ returned 0 after 157 usecs [ 197.319427] calling usb1+ @ 4240, parent: 0000:00:14.0 [ 197.319630] calling serial8250+ @ 4224, parent: platform [ 197.319639] call serial8250+ returned 0 after 3 usecs [ 197.319853] calling alarmtimer+ @ 4224, parent: platform [ 197.319858] call alarmtimer+ returned 0 after 1 usecs [ 197.319929] calling efi-framebuffer.0+ @ 4224, parent: platform [ 197.319935] call efi-framebuffer.0+ returned 0 after 1 usecs [ 197.319949] calling pcspkr+ @ 4224, parent: platform [ 197.319956] call pcspkr+ returned 0 after 1 usecs [ 197.320812] calling 00:07+ @ 4224, parent: pnp0 [ 197.320844] call 00:07+ returned 0 after 25 usecs [ 197.320859] calling 00:06+ @ 4224, parent: pnp0 [ 197.320867] call usb1+ returned 0 after 1398 usecs [ 197.320870] call 00:06+ returned 0 after 1 usecs [ 197.320882] calling 00:05+ @ 4224, parent: pnp0 [ 197.320888] call 00:05+ returned 0 after 1 usecs [ 197.320941] calling 00:04+ @ 4224, parent: pnp0 [ 197.320947] call 00:04+ returned 0 after 1 usecs [ 197.320960] calling 00:03+ @ 4224, parent: pnp0 [ 197.320966] call 00:03+ returned 0 after 1 usecs [ 197.320979] calling 00:02+ @ 4224, parent: pnp0 [ 197.320987] call 00:02+ returned 0 after 1 usecs [ 197.321003] calling 00:01+ @ 4224, parent: pnp0 [ 197.321825] serial 00:01: disabled [ 197.321830] call 00:01+ returned 0 after 803 usecs [ 197.321850] calling 00:00+ @ 4224, parent: pnp0 [ 197.321855] call 00:00+ returned 0 after 1 usecs [ 197.321936] calling LNXPWRBN:00+ @ 4224, parent: LNXSYSTM:00 [ 197.321942] call LNXPWRBN:00+ returned 0 after 1 usecs [ 197.321957] calling PNP0C0B:00+ @ 4224, parent: platform [ 197.322966] call ata2+ returned 0 after 4466 usecs [ 197.325379] call PNP0C0B:00+ returned 0 after 3332 usecs [ 197.325403] calling MSFT0101:00+ @ 4224, parent: platform [ 197.325409] call MSFT0101:00+ returned 0 after 2 usecs [ 197.325426] calling ACPI000C:00+ @ 4224, parent: platform [ 197.325431] call ACPI000C:00+ returned 0 after 1 usecs [ 197.325446] calling INT33BD:00+ @ 4224, parent: platform [ 197.325451] call INT33BD:00+ returned 0 after 1 usecs [ 197.325465] calling INT33FF:03+ @ 4224, parent: platform [ 197.325470] call INT33FF:03+ returned 0 after 1 usecs [ 197.325484] calling INT33FF:02+ @ 4224, parent: platform [ 197.325489] call INT33FF:02+ returned 0 after 1 usecs [ 197.325504] calling INT33FF:01+ @ 4224, parent: platform [ 197.325509] call INT33FF:01+ returned 0 after 1 usecs [ 197.325524] calling INT33FF:00+ @ 4224, parent: platform [ 197.325529] call INT33FF:00+ returned 0 after 1 usecs [ 197.325545] calling PNP0C0E:00+ @ 4224, parent: platform [ 197.325550] call PNP0C0E:00+ returned 0 after 1 usecs [ 197.325565] calling PNP0C0C:00+ @ 4224, parent: platform [ 197.325570] call PNP0C0C:00+ returned 0 after 1 usecs [ 197.325586] calling PNP0103:00+ @ 4224, parent: platform [ 197.325591] call PNP0103:00+ returned 0 after 1 usecs [ 197.325606] calling PNP0C0D:00+ @ 4224, parent: platform [ 197.325611] call PNP0C0D:00+ returned 0 after 1 usecs [ 197.325626] calling ACPI0003:00+ @ 4224, parent: platform [ 197.325631] call ACPI0003:00+ returned 0 after 1 usecs [ 197.325647] calling INT33BB:01+ @ 4224, parent: pci0000:00 [ 197.325652] call INT33BB:01+ returned 0 after 1 usecs [ 197.325669] calling INT0800:00+ @ 4224, parent: 0000:00:1f.0 [ 197.325674] call INT0800:00+ returned 0 after 1 usecs [ 197.325689] calling INT33D2:00+ @ 4224, parent: PNP0C09:00 [ 197.325694] call INT33D2:00+ returned 0 after 1 usecs [ 197.325710] calling PNP0C0A:01+ @ 4224, parent: PNP0C09:00 [ 197.325715] call PNP0C0A:01+ returned 0 after 1 usecs [ 197.325731] calling PNP0C0A:00+ @ 4224, parent: PNP0C09:00 [ 197.325736] call PNP0C0A:00+ returned 0 after 1 usecs [ 197.325754] calling PNP0C09:00+ @ 4224, parent: 0000:00:1f.0 [ 197.325759] call PNP0C09:00+ returned 0 after 1 usecs [ 197.325954] calling 0000:02:00.0+ @ 4239, parent: 0000:00:1c.1 [ 197.325963] call 0000:02:00.0+ returned 0 after 2 usecs [ 197.326005] calling 0000:00:1f.3+ @ 4239, parent: pci0000:00 [ 197.326047] call 0000:00:1f.3+ returned 0 after 36 usecs [ 197.326081] calling 0000:00:1f.0+ @ 4239, parent: pci0000:00 [ 197.326087] call 0000:00:1f.0+ returned 0 after 2 usecs [ 197.326119] calling 0000:00:1c.1+ @ 4239, parent: pci0000:00 [ 197.326131] calling LNXTHERM:00+ @ 4224, parent: LNXSYBUS:01 [ 197.326137] call 0000:00:1c.1+ returned 0 after 11 usecs [ 197.326161] calling 0000:00:1c.0+ @ 4239, parent: pci0000:00 [ 197.326169] call 0000:00:1c.0+ returned 0 after 3 usecs [ 197.326191] calling 0000:00:1b.0+ @ 4239, parent: pci0000:00 [ 197.326521] call LNXTHERM:00+ returned 0 after 373 usecs [ 197.326678] calling PNP0C0E:00+ @ 4224, parent: LNXSYBUS:00 [ 197.326684] call PNP0C0E:00+ returned 0 after 1 usecs [ 197.326700] calling PNP0C0C:00+ @ 4224, parent: LNXSYBUS:00 [ 197.326705] call PNP0C0C:00+ returned 0 after 1 usecs [ 197.326748] calling PNP0C0D:00+ @ 4224, parent: LNXSYBUS:00 [ 197.326754] call PNP0C0D:00+ returned 0 after 1 usecs [ 197.326769] calling 0000:00:1a.0+ @ 4240, parent: pci0000:00 [ 197.326776] call 0000:00:1a.0+ returned 0 after 1 usecs [ 197.326794] calling 0000:00:14.0+ @ 1043, parent: pci0000:00 [ 197.326802] call 0000:00:14.0+ returned 0 after 3 usecs [ 197.326824] calling 0000:00:0b.0+ @ 4240, parent: pci0000:00 [ 197.326829] calling 0000:00:13.0+ @ 28, parent: pci0000:00 [ 197.326832] call 0000:00:0b.0+ returned 0 after 1 usecs [ 197.326844] calling 0000:00:03.0+ @ 1454, parent: pci0000:00 [ 197.326851] call 0000:00:03.0+ returned 0 after 1 usecs [ 197.326868] calling 0000:00:02.0+ @ 1043, parent: pci0000:00 [ 197.326871] calling 0000:00:00.0+ @ 4240, parent: pci0000:00 [ 197.326876] call 0000:00:00.0+ returned 0 after 1 usecs [ 197.326973] call 0000:00:13.0+ returned 0 after 134 usecs [ 197.327149] [drm:intel_display_power_get] enabling always-on [ 197.440966] call 0000:00:1b.0+ returned 0 after 112071 usecs [ 197.493383] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 197.507953] [drm:edp_panel_vdd_on] Turning eDP port C VDD on [ 197.507978] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 197.508074] [drm:intel_edp_backlight_off] [ 197.709229] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 197.723130] [drm:edp_panel_off] Turn eDP port C panel power off [ 197.723142] [drm:wait_panel_off] Wait for panel power off time [ 197.723156] [drm:wait_panel_status] mask b0000000 value 00000000 status e0000003 control abcd0000 [ 197.767191] [drm:wait_panel_status] Wait complete [ 197.787066] [drm:intel_dp_link_down] [ 197.862024] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 197.862033] [drm:cherryview_update_wm] Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, C: plane=2, cursor=2, SR: plane=0, cursor=0 [ 197.878238] [drm:i915_check_and_clear_faults] Unexpected fault [ 197.878238] Addr: 0x00000000 [ 197.878238] Address space: PPGTT [ 197.878238] Source ID: 24 [ 197.878238] Type: 0 [ 197.881100] [drm:intel_display_power_put] disabling dpio-common-d [ 197.883036] [drm:intel_display_power_put] disabling dpio-common-bc [ 197.884995] [drm:intel_display_power_put] disabling pipe-a [ 197.886999] [drm:intel_display_power_put] disabling always-on [ 197.887009] call 0000:00:02.0+ returned 0 after 546982 usecs [ 197.887329] PM: freeze of devices complete after 575.564 msecs [ 197.893483] calling 0000:00:02.0+ @ 4239, parent: pci0000:00 [ 197.910991] call 0000:00:02.0+ returned 0 after 17089 usecs [ 197.911100] PM: late freeze of devices complete after 23.758 msecs [ 197.917212] calling 0000:02:00.0+ @ 4239, parent: 0000:00:1c.1 [ 197.917250] calling 0000:00:1f.3+ @ 1043, parent: pci0000:00 [ 197.917293] calling 0000:00:1f.0+ @ 1454, parent: pci0000:00 [ 197.921022] calling 0000:00:1c.0+ @ 4238, parent: pci0000:00 [ 197.925315] call 0000:00:1f.0+ returned 0 after 7826 usecs [ 197.925359] calling 0000:00:1b.0+ @ 1454, parent: pci0000:00 [ 197.925367] call 0000:00:1b.0+ returned 0 after 3 usecs [ 197.925390] calling 0000:00:1a.0+ @ 1454, parent: pci0000:00 [ 197.926040] call 0000:00:1f.3+ returned 0 after 8575 usecs [ 197.926080] calling 0000:00:14.0+ @ 1043, parent: pci0000:00 [ 197.930810] call 0000:02:00.0+ returned 0 after 13268 usecs [ 197.930860] calling 0000:00:13.0+ @ 4239, parent: pci0000:00 [ 197.930869] call 0000:00:13.0+ returned 0 after 4 usecs [ 197.930892] calling 0000:00:0b.0+ @ 4239, parent: pci0000:00 [ 197.930940] call 0000:00:1a.0+ returned 0 after 5412 usecs [ 197.930981] calling 0000:00:03.0+ @ 28, parent: pci0000:00 [ 197.931140] call 0000:00:1c.0+ returned 0 after 9872 usecs [ 197.931174] call 0000:00:14.0+ returned 0 after 4967 usecs [ 197.931210] calling 0000:00:02.0+ @ 6, parent: pci0000:00 [ 197.931216] call 0000:00:02.0+ returned 0 after 1 usecs [ 197.931238] calling 0000:00:00.0+ @ 6, parent: pci0000:00 [ 197.931253] call 0000:00:03.0+ returned 0 after 259 usecs [ 197.931258] call 0000:00:0b.0+ returned 0 after 352 usecs [ 197.931295] call 0000:00:00.0+ returned 0 after 50 usecs [ 197.931326] calling 0000:00:1c.1+ @ 4240, parent: pci0000:00 [ 197.932206] call 0000:00:1c.1+ returned 0 after 854 usecs [ 197.932258] PM: noirq freeze of devices complete after 21.148 msecs [ 197.932323] ACPI: Preparing to enter system sleep state S4 [ 197.938212] PM: Saving platform NVS memory [ 197.953638] Disabling non-boot CPUs ... [ 197.963010] smpboot: CPU 1 is now offline [ 197.978182] smpboot: CPU 2 is now offline [ 197.984782] Broke affinity for irq 115 [ 197.985921] smpboot: CPU 3 is now offline [ 197.989343] PM: Calling mce_syscore_suspend+0x0/0x10 [ 197.989354] PM: Calling acpi_processor_suspend+0x0/0x1e [ 197.989368] PM: Calling timekeeping_suspend+0x0/0x190 [ 197.989489] PM: Calling save_ioapic_entries+0x0/0x6c [ 197.990082] PM: Calling i8259A_suspend+0x0/0x28 [ 197.990093] PM: Calling fw_suspend+0x0/0x17 [ 197.990099] PM: Calling lapic_suspend+0x0/0x18e [ 197.990108] PM: Creating hibernation image: [ 198.257040] PM: Need to copy 93455 pages [ 198.257044] PM: Normal pages needed: 93455 + 1024, available pages: 935128 [ 197.990470] PM: Restoring platform NVS memory [ 197.991040] PM: Calling lapic_resume+0x0/0x22f [ 197.991107] PM: Calling irqrouter_resume+0x0/0x41 [ 197.991114] PM: Calling i8259A_resume+0x0/0x2d [ 197.991273] PM: Calling i8237A_resume+0x0/0x8c [ 197.991647] PM: Calling ioapic_resume+0x0/0x79 [ 197.991865] PM: Calling irq_pm_syscore_resume+0x0/0x15 [ 197.991912] PM: Calling timekeeping_resume+0x0/0x1b7 [ 197.992780] PM: Calling acpi_processor_resume+0x0/0x39 [ 197.992794] PM: Calling mce_syscore_resume+0x0/0x25 [ 197.992809] CPU0: Thermal LVT vector (0xfa) already installed [ 197.993228] Enabling non-boot CPUs ... [ 197.994225] x86: Booting SMP configuration: [ 197.994231] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 198.010782] CPU1: Thermal LVT vector (0xfa) already installed [ 198.039507] CPU1 is up [ 198.040024] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 198.056686] CPU2: Thermal LVT vector (0xfa) already installed [ 198.081380] CPU2 is up [ 198.081946] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 198.098486] CPU3: Thermal LVT vector (0xfa) already installed [ 198.124214] CPU3 is up [ 198.131676] ACPI: Waking up from system sleep state S4 [ 198.369945] acpi LNXPOWER:05: Turning OFF [ 198.371794] acpi LNXPOWER:04: Turning OFF [ 198.374223] calling 0000:00:00.0+ @ 28, parent: pci0000:00 [ 198.374284] call 0000:00:00.0+ returned 0 after 52 usecs [ 198.374312] calling 0000:00:02.0+ @ 28, parent: pci0000:00 [ 198.374355] calling 0000:00:03.0+ @ 4240, parent: pci0000:00 [ 198.374436] call 0000:00:03.0+ returned 0 after 74 usecs [ 198.374495] calling 0000:00:0b.0+ @ 4240, parent: pci0000:00 [ 198.374564] call 0000:00:0b.0+ returned 0 after 62 usecs [ 198.374582] calling 0000:00:13.0+ @ 4240, parent: pci0000:00 [ 198.374701] call 0000:00:13.0+ returned 0 after 112 usecs [ 198.374726] calling 0000:00:14.0+ @ 4240, parent: pci0000:00 [ 198.374849] call 0000:00:14.0+ returned 0 after 114 usecs [ 198.374878] calling 0000:00:1a.0+ @ 4240, parent: pci0000:00 [ 198.374958] call 0000:00:1a.0+ returned 0 after 73 usecs [ 198.374984] calling 0000:00:1b.0+ @ 4240, parent: pci0000:00 [ 198.375022] calling 0000:00:1c.0+ @ 4241, parent: pci0000:00 [ 198.375972] call 0000:00:1c.0+ returned 0 after 922 usecs [ 198.375999] calling 0000:00:1c.1+ @ 4241, parent: pci0000:00 [ 198.376566] calling 0000:00:1f.0+ @ 1042, parent: pci0000:00 [ 198.376582] calling 0000:00:1f.3+ @ 4238, parent: pci0000:00 [ 198.377053] call 0000:00:1c.1+ returned 0 after 1022 usecs [ 198.377075] calling 0000:02:00.0+ @ 4241, parent: 0000:00:1c.1 [ 198.378755] call 0000:00:1f.0+ returned 0 after 2127 usecs [ 198.380780] call 0000:00:1f.3+ returned 0 after 4092 usecs [ 198.383832] call 0000:02:00.0+ returned 0 after 6591 usecs [ 198.384670] call 0000:00:02.0+ returned 0 after 10107 usecs [ 198.385662] call 0000:00:1b.0+ returned 0 after 10420 usecs [ 198.385806] PM: noirq restore of devices complete after 12.440 msecs [ 198.386047] calling 0000:00:02.0+ @ 28, parent: pci0000:00 [ 198.390340] calling PNP0C0B:00+ @ 4224, parent: platform [ 198.390352] call PNP0C0B:00+ returned 0 after 5 usecs [ 198.393643] [drm:intel_display_power_get] enabling always-on [ 198.393648] [drm:intel_display_power_get] enabling pipe-a [ 198.397553] [drm:intel_display_power_get] enabling dpio-common-bc [ 198.399555] [drm:intel_display_power_get] enabling dpio-common-d [ 198.401744] call 0000:00:02.0+ returned 0 after 15320 usecs [ 198.402190] calling iTCO_wdt+ @ 4224, parent: 0000:00:1f.0 [ 198.402201] call iTCO_wdt+ returned 0 after 4 usecs [ 198.402448] PM: early restore of devices complete after 16.520 msecs [ 198.604438] calling 0000:00:00.0+ @ 28, parent: pci0000:00 [ 198.604447] calling 0000:00:02.0+ @ 4241, parent: pci0000:00 [ 198.604450] call 0000:00:00.0+ returned 0 after 4 usecs [ 198.604497] calling 0000:00:03.0+ @ 28, parent: pci0000:00 [ 198.604504] call 0000:00:03.0+ returned 0 after 2 usecs [ 198.604524] calling 0000:00:0b.0+ @ 28, parent: pci0000:00 [ 198.604530] call 0000:00:0b.0+ returned 0 after 1 usecs [ 198.604548] calling 0000:00:13.0+ @ 28, parent: pci0000:00 [ 198.604581] call 0000:00:13.0+ returned 0 after 28 usecs [ 198.604599] calling 0000:00:14.0+ @ 4240, parent: pci0000:00 [ 198.604607] calling 0000:00:1a.0+ @ 28, parent: pci0000:00 [ 198.604613] call 0000:00:1a.0+ returned 0 after 1 usecs [ 198.604632] calling 0000:00:1b.0+ @ 28, parent: pci0000:00 [ 198.604660] usb usb1: root hub lost power or was reset [ 198.604665] usb usb2: root hub lost power or was reset [ 198.606663] calling PNP0C0A:00+ @ 4224, parent: PNP0C09:00 [ 198.606832] calling 0000:00:1c.0+ @ 4238, parent: pci0000:00 [ 198.606846] call 0000:00:1c.0+ returned 0 after 7 usecs [ 198.606872] calling 0000:00:1c.1+ @ 4238, parent: pci0000:00 [ 198.606881] call 0000:00:1c.1+ returned 0 after 4 usecs [ 198.606901] calling 0000:00:1f.0+ @ 4238, parent: pci0000:00 [ 198.606907] call 0000:00:1f.0+ returned 0 after 1 usecs [ 198.606927] calling 0000:00:1f.3+ @ 4238, parent: pci0000:00 [ 198.607077] calling ata1+ @ 1043, parent: 0000:00:13.0 [ 198.607104] call ata1+ returned 0 after 21 usecs [ 198.607127] calling ata2+ @ 1043, parent: 0000:00:13.0 [ 198.607147] call ata2+ returned 0 after 15 usecs [ 198.607168] calling host0+ @ 1043, parent: ata1 [ 198.607178] call host0+ returned 0 after 5 usecs [ 198.607212] calling host1+ @ 1043, parent: ata2 [ 198.607220] call host1+ returned 0 after 3 usecs [ 198.607633] calling 0000:02:00.0+ @ 1042, parent: 0000:00:1c.1 [ 198.607640] call 0000:02:00.0+ returned 0 after 2 usecs [ 198.607882] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it [ 198.608011] xhci_hcd 0000:00:14.0: irq 116 for MSI/MSI-X [ 198.608309] [drm:intel_opregion_setup] graphic opregion physical addr: 0x7b758018 [ 198.608419] [drm:intel_opregion_setup] Public ACPI methods supported [ 198.608422] [drm:intel_opregion_setup] ASLE supported [ 198.609169] [drm:vlv_initial_power_sequencer_setup] no initial power sequencer for port C [ 198.609768] call 0000:00:14.0+ returned 0 after 5040 usecs [ 198.609799] calling usb1+ @ 1043, parent: 0000:00:14.0 [ 198.610401] calling usb2+ @ 4247, parent: 0000:00:14.0 [ 198.611490] snd_hda_intel 0000:00:1b.0: irq 118 for MSI/MSI-X [ 198.612580] [drm:init_status_page] render ring hws offset: 0x00013000 [ 198.613612] call PNP0C0A:00+ returned 0 after 6776 usecs [ 198.613626] calling PNP0C0A:01+ @ 4224, parent: PNP0C09:00 [ 198.614198] calling target1:0:0+ @ 4257, parent: host1 [ 198.614209] call target1:0:0+ returned 0 after 6 usecs [ 198.614234] calling 1:0:0:0+ @ 4257, parent: target1:0:0 [ 198.614264] call 1:0:0:0+ returned 0 after 25 usecs [ 198.614425] call 0000:00:1f.3+ returned 0 after 7315 usecs [ 198.614558] [drm:init_status_page] bsd ring hws offset: 0x00037000 [ 198.614597] call PNP0C0A:01+ returned 0 after 940 usecs [ 198.614612] [drm:init_status_page] blitter ring hws offset: 0x0005a000 [ 198.614661] [drm:init_status_page] video enhancement ring hws offset: 0x0007d000 [ 198.614936] [drm:vlv_update_cdclk] Current CD clock rate: 400000 kHz [ 198.615040] [drm:intel_modeset_readout_hw_state] [CRTC:8] hw state readout: disabled [ 198.615050] [drm:intel_modeset_readout_hw_state] [CRTC:13] hw state readout: disabled [ 198.615058] [drm:intel_modeset_readout_hw_state] [CRTC:18] hw state readout: disabled [ 198.615068] [drm:intel_modeset_readout_hw_state] [ENCODER:21:TMDS-21] hw state readout: disabled, pipe A [ 198.615076] [drm:intel_modeset_readout_hw_state] [ENCODER:26:TMDS-26] hw state readout: disabled, pipe A [ 198.615084] [drm:intel_modeset_readout_hw_state] [ENCODER:28:TMDS-28] hw state readout: disabled, pipe A [ 198.615093] [drm:intel_modeset_readout_hw_state] [ENCODER:34:TMDS-34] hw state readout: disabled, pipe A [ 198.615101] [drm:intel_modeset_readout_hw_state] [ENCODER:36:TMDS-36] hw state readout: disabled, pipe A [ 198.615110] [drm:intel_modeset_readout_hw_state] [CONNECTOR:29:eDP-1] hw state readout: disabled [ 198.615119] [drm:intel_modeset_readout_hw_state] [CONNECTOR:22:HDMI-A-1] hw state readout: disabled [ 198.615127] [drm:intel_modeset_readout_hw_state] [CONNECTOR:27:DP-1] hw state readout: disabled [ 198.615135] [drm:intel_modeset_readout_hw_state] [CONNECTOR:35:HDMI-A-2] hw state readout: disabled [ 198.615143] [drm:intel_modeset_readout_hw_state] [CONNECTOR:37:DP-2] hw state readout: disabled [ 198.615156] [drm:i915_get_vblank_timestamp] crtc 0 is disabled [ 198.615251] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe A [ 198.615254] [drm:i915_get_vblank_timestamp] crtc 0 is disabled [ 198.615258] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe A [ 198.615266] [drm:intel_dump_pipe_config] [CRTC:8][setup_hw_state] config for pipe A [ 198.615268] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 198.615271] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 198.615276] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 198.615280] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 198.615284] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 198.615287] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 198.615289] [drm:intel_dump_pipe_config] requested mode: [ 198.615296] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 198.615299] calling ACPI0003:00+ @ 4224, parent: LNXSYBUS:00 [ 198.615301] [drm:intel_dump_pipe_config] adjusted mode: [ 198.615306] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 198.615311] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 198.615314] [drm:intel_dump_pipe_config] port clock: 0 [ 198.615317] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 198.615320] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 198.615324] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 198.615326] [drm:intel_dump_pipe_config] ips: 0 [ 198.615329] [drm:intel_dump_pipe_config] double wide: 0 [ 198.615338] [drm:i915_get_vblank_timestamp] crtc 1 is disabled [ 198.615345] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B [ 198.615347] [drm:i915_get_vblank_timestamp] crtc 1 is disabled [ 198.615350] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B [ 198.615356] [drm:intel_dump_pipe_config] [CRTC:13][setup_hw_state] config for pipe B [ 198.615358] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 198.615361] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 198.615365] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 198.615369] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 198.615373] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 198.615376] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 198.615378] [drm:intel_dump_pipe_config] requested mode: [ 198.615384] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 198.615386] [drm:intel_dump_pipe_config] adjusted mode: [ 198.615391] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 198.615396] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 198.615399] [drm:intel_dump_pipe_config] port clock: 0 [ 198.615402] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 198.615405] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 198.615408] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 198.615411] [drm:intel_dump_pipe_config] ips: 0 [ 198.615414] [drm:intel_dump_pipe_config] double wide: 0 [ 198.615421] [drm:i915_get_vblank_timestamp] crtc 2 is disabled [ 198.615428] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C [ 198.615431] [drm:i915_get_vblank_timestamp] crtc 2 is disabled [ 198.615434] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C [ 198.615439] [drm:intel_dump_pipe_config] [CRTC:18][setup_hw_state] config for pipe C [ 198.615441] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 198.615444] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 198.615448] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 198.615452] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 198.615457] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 198.615460] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 198.615462] [drm:intel_dump_pipe_config] requested mode: [ 198.615492] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 198.615494] [drm:intel_dump_pipe_config] adjusted mode: [ 198.615500] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 198.615505] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 198.615507] [drm:intel_dump_pipe_config] port clock: 0 [ 198.615510] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 198.615514] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 198.615517] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 198.615520] [drm:intel_dump_pipe_config] ips: 0 [ 198.615522] [drm:intel_dump_pipe_config] double wide: 0 [ 198.615534] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 198.615588] ------------[ cut here ]------------ [ 198.615651] WARNING: CPU: 0 PID: 4241 at drivers/gpu/drm/i915/intel_display.c:10336 __intel_set_mode+0x95a/0x99a [i915]() [ 198.615656] WARN_ON(intel_crtc->new_config && intel_crtc->new_config != &intel_crtc->config) [ 198.615724] Modules linked in: ipv6 rfcomm bluetooth rfkill dm_mod iTCO_wdt iTCO_vendor_support snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_controller serio_raw pcspkr snd_hda_codec option usb_wwan snd_hwdep snd_pcm snd_timer snd lpc_ich mfd_core i2c_i801 usbserial soundcore battery ac acpi_cpufreq i915 button video drm_kms_helper drm cfbfillrect cfbimgblt cfbcopyarea [ 198.615731] CPU: 0 PID: 4241 Comm: kworker/u8:8 Not tainted 3.18.0-rc5_drm-intel-testing_167896_20141122_+ #117 [ 198.615742] Workqueue: events_unbound async_run_entry_fn [ 198.615752] 0000000000000009 ffff8800757639b8 ffffffff8183b528 ffffffff81070ea5 [ 198.615761] ffff880075763a08 ffff8800757639f8 ffffffff8103bba8 0000000000000000 [ 198.615769] ffffffffa00ea69f ffff880173b10000 ffff880173b106f0 ffff88017a466000 [ 198.615771] Call Trace: [ 198.615782] [] dump_stack+0x46/0x58 [ 198.615788] [] ? up+0x39/0x40 [ 198.615797] [] warn_slowpath_common+0x81/0x9b [ 198.615850] [] ? __intel_set_mode+0x95a/0x99a [i915] [ 198.615854] call ACPI0003:00+ returned 0 after 487 usecs [ 198.615861] [] warn_slowpath_fmt+0x46/0x48 [ 198.615868] calling PNP0C0D:00+ @ 4224, parent: LNXSYBUS:00 [ 198.615918] [] __intel_set_mode+0x95a/0x99a [i915] [ 198.615972] [] intel_set_mode+0xa4/0xc5 [i915] [ 198.616024] [] intel_modeset_setup_hw_state+0x991/0xa68 [i915] [ 198.616073] [] ? chv_write64+0x26a/0x26a [i915] [ 198.616106] [] i915_drm_resume+0x108/0x176 [i915] [ 198.616140] [] i915_pm_resume+0x20/0x22 [i915] [ 198.616148] [] pci_pm_restore+0x8a/0x9e [ 198.616154] [] ? pci_pm_default_resume+0x36/0x36 [ 198.616159] [] ? pci_pm_default_resume+0x36/0x36 [ 198.616166] [] dpm_run_callback+0x6c/0xf3 [ 198.616172] [] device_resume+0x189/0x1cb [ 198.616178] [] async_resume+0x1e/0x45 [ 198.616185] [] async_run_entry_fn+0x39/0xc6 [ 198.616193] [] process_one_work+0x22b/0x409 [ 198.616199] [] ? process_one_work+0x193/0x409 [ 198.616206] [] ? __delay+0xf/0x11 [ 198.616213] [] worker_thread+0x264/0x363 [ 198.616219] [] ? process_scheduled_works+0x2f/0x2f [ 198.616226] [] kthread+0xed/0xf5 [ 198.616234] [] ? __init_kthread_worker+0x5a/0x5a [ 198.616242] [] ret_from_fork+0x7c/0xb0 [ 198.616248] [] ? __init_kthread_worker+0x5a/0x5a [ 198.616251] ---[ end trace 4e88df66f8204926 ]--- [ 198.616756] call PNP0C0D:00+ returned 0 after 859 usecs [ 198.616788] calling PNP0C0C:00+ @ 4224, parent: LNXSYBUS:00 [ 198.616795] call PNP0C0C:00+ returned 0 after 1 usecs [ 198.616804] calling PNP0C0E:00+ @ 4224, parent: LNXSYBUS:00 [ 198.616809] call PNP0C0E:00+ returned 0 after 1 usecs [ 198.616895] calling LNXTHERM:00+ @ 4224, parent: LNXSYBUS:01 [ 198.619086] call LNXTHERM:00+ returned 0 after 2130 usecs [ 198.622860] calling PNP0C09:00+ @ 4224, parent: 0000:00:1f.0 [ 198.622867] call PNP0C09:00+ returned 0 after 1 usecs [ 198.622876] calling PNP0C0A:00+ @ 4224, parent: PNP0C09:00 [ 198.622881] call PNP0C0A:00+ returned 0 after 1 usecs [ 198.622890] calling PNP0C0A:01+ @ 4224, parent: PNP0C09:00 [ 198.622895] call PNP0C0A:01+ returned 0 after 1 usecs [ 198.622904] calling INT33D2:00+ @ 4224, parent: PNP0C09:00 [ 198.622909] call INT33D2:00+ returned 0 after 1 usecs [ 198.622918] calling INT0800:00+ @ 4224, parent: 0000:00:1f.0 [ 198.622925] call INT0800:00+ returned 0 after 1 usecs [ 198.622935] calling INT33BB:01+ @ 4224, parent: pci0000:00 [ 198.622941] call INT33BB:01+ returned 0 after 1 usecs [ 198.622951] calling ACPI0003:00+ @ 4224, parent: platform [ 198.622956] call ACPI0003:00+ returned 0 after 1 usecs [ 198.622965] calling PNP0C0D:00+ @ 4224, parent: platform [ 198.622970] call PNP0C0D:00+ returned 0 after 1 usecs [ 198.622980] calling PNP0103:00+ @ 4224, parent: platform [ 198.622985] call PNP0103:00+ returned 0 after 1 usecs [ 198.622996] calling PNP0C0C:00+ @ 4224, parent: platform [ 198.623001] call PNP0C0C:00+ returned 0 after 1 usecs [ 198.623010] calling PNP0C0E:00+ @ 4224, parent: platform [ 198.623015] call PNP0C0E:00+ returned 0 after 1 usecs [ 198.623024] calling INT33FF:00+ @ 4224, parent: platform [ 198.623028] call INT33FF:00+ returned 0 after 1 usecs [ 198.623038] calling INT33FF:01+ @ 4224, parent: platform [ 198.623043] call INT33FF:01+ returned 0 after 1 usecs [ 198.623052] calling INT33FF:02+ @ 4224, parent: platform [ 198.623057] call INT33FF:02+ returned 0 after 1 usecs [ 198.623066] calling INT33FF:03+ @ 4224, parent: platform [ 198.623071] call INT33FF:03+ returned 0 after 1 usecs [ 198.623080] calling INT33BD:00+ @ 4224, parent: platform [ 198.623085] call INT33BD:00+ returned 0 after 1 usecs [ 198.623095] calling ACPI000C:00+ @ 4224, parent: platform [ 198.623100] call ACPI000C:00+ returned 0 after 1 usecs [ 198.623110] calling MSFT0101:00+ @ 4224, parent: platform [ 198.623115] call MSFT0101:00+ returned 0 after 1 usecs [ 198.623125] calling PNP0C0B:00+ @ 4224, parent: platform [ 198.624633] call PNP0C0B:00+ returned 0 after 1465 usecs [ 198.624646] calling LNXPWRBN:00+ @ 4224, parent: LNXSYSTM:00 [ 198.624653] call LNXPWRBN:00+ returned 0 after 2 usecs [ 198.624682] calling 00:00+ @ 4224, parent: pnp0 [ 198.624689] call 00:00+ returned 0 after 3 usecs [ 198.624699] calling 00:01+ @ 4224, parent: pnp0 [ 198.624713] call 00:01+ returned 0 after 10 usecs [ 198.624723] calling 00:02+ @ 4224, parent: pnp0 [ 198.624728] call 00:02+ returned 0 after 1 usecs [ 198.624738] calling 00:03+ @ 4224, parent: pnp0 [ 198.624744] call 00:03+ returned 0 after 1 usecs [ 198.624752] calling 00:04+ @ 4224, parent: pnp0 [ 198.624758] call 00:04+ returned 0 after 2 usecs [ 198.624767] calling 00:05+ @ 4224, parent: pnp0 [ 198.624773] call 00:05+ returned 0 after 2 usecs [ 198.624782] calling 00:06+ @ 4224, parent: pnp0 [ 198.624787] call 00:06+ returned 0 after 1 usecs [ 198.624795] calling 00:07+ @ 4224, parent: pnp0 [ 198.624817] rtc_cmos 00:07: System wakeup disabled by ACPI [ 198.624827] call 00:07+ returned 0 after 25 usecs [ 198.625355] calling pcspkr+ @ 4224, parent: platform [ 198.625362] call pcspkr+ returned 0 after 2 usecs [ 198.625372] calling efi-framebuffer.0+ @ 4224, parent: platform [ 198.625377] call efi-framebuffer.0+ returned 0 after 1 usecs [ 198.625408] calling alarmtimer+ @ 4224, parent: platform [ 198.625414] call alarmtimer+ returned 0 after 1 usecs [ 198.625581] calling serial8250+ @ 4224, parent: platform [ 198.625589] call serial8250+ returned 0 after 3 usecs [ 198.625691] [drm:intel_display_power_put] disabling always-on [ 198.625802] [drm:check_encoder_state] [ENCODER:21:TMDS-21] [ 198.625810] [drm:check_encoder_state] [ENCODER:26:TMDS-26] [ 198.625818] [drm:check_encoder_state] [ENCODER:28:TMDS-28] [ 198.625825] [drm:check_encoder_state] [ENCODER:34:TMDS-34] [ 198.625832] [drm:check_encoder_state] [ENCODER:36:TMDS-36] [ 198.625840] [drm:check_crtc_state] [CRTC:8] [ 198.625849] [drm:check_crtc_state] [CRTC:13] [ 198.625861] [drm:check_crtc_state] [CRTC:18] [ 198.625871] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 198.625912] [drm:connected_sink_compute_bpp] [CONNECTOR:29:eDP-1] checking for sink bpp constrains [ 198.625920] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 198.625934] calling i8042+ @ 4224, parent: platform [ 198.625938] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 198.625942] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 198.625947] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 198.625951] [drm:intel_dump_pipe_config] [CRTC:13][modeset] config for pipe B [ 198.625953] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 198.625956] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 198.625961] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 198.625965] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 198.625969] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 198.625972] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 198.625975] [drm:intel_dump_pipe_config] requested mode: [ 198.625984] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 198.625986] [drm:intel_dump_pipe_config] adjusted mode: [ 198.625992] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 198.625998] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 198.626001] [drm:intel_dump_pipe_config] port clock: 270000 [ 198.626004] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 198.626008] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 198.626011] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 198.626014] [drm:intel_dump_pipe_config] ips: 0 [ 198.626016] [drm:intel_dump_pipe_config] double wide: 0 [ 198.626284] call i8042+ returned 0 after 336 usecs [ 198.626295] calling serio0+ @ 4224, parent: i8042 [ 198.626931] call serio0+ returned 0 after 612 usecs [ 198.627284] calling serio1+ @ 4224, parent: i8042 [ 198.627326] call serio1+ returned 0 after 34 usecs [ 198.627350] calling rtc0+ @ 4224, parent: 00:07 [ 198.627356] call rtc0+ returned 0 after 1 usecs [ 198.627515] calling input2+ @ 4224, parent: serio0 [ 198.628011] call input2+ returned 0 after 477 usecs [ 198.628193] calling input3+ @ 4224, parent: PNP0C0D:00 [ 198.628202] call input3+ returned 0 after 3 usecs [ 198.628223] calling input5+ @ 4224, parent: PNP0C0C:00 [ 198.628230] call input5+ returned 0 after 3 usecs [ 198.628245] calling input6+ @ 4224, parent: PNP0C0E:00 [ 198.628252] call input6+ returned 0 after 2 usecs [ 198.628267] calling input7+ @ 4224, parent: LNXPWRBN:00 [ 198.628274] call input7+ returned 0 after 3 usecs [ 198.634568] sd 1:0:0:0: [sda] Starting disk [ 198.641113] call 0000:00:1b.0+ returned 0 after 35615 usecs [ 198.705621] [drm:vlv_init_panel_power_sequencer] initializing pipe B power sequencer for port C [ 198.705640] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06 [ 198.711540] [drm:edp_panel_vdd_on] Turning eDP port C VDD on [ 198.711550] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 198.711561] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control 00000000 [ 198.711566] [drm:wait_panel_status] Wait complete [ 198.711581] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 198.711587] [drm:edp_panel_vdd_on] eDP port C panel power wasn't enabled [ 198.713589] call usb2+ returned 0 after 100756 usecs [ 198.824577] call usb1+ returned 0 after 209725 usecs [ 198.824627] calling 1-3+ @ 4257, parent: usb1 [ 198.824645] calling 1-5+ @ 4281, parent: usb1 [ 198.824785] calling 1-6+ @ 4290, parent: usb1 [ 198.851775] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [ 198.912535] [drm:edp_panel_on] Turn eDP port C panel power on [ 198.912547] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 198.912562] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008 [ 198.912567] [drm:wait_panel_status] Wait complete [ 198.912579] [drm:wait_panel_on] Wait for panel power on [ 198.912588] [drm:wait_panel_status] mask b000000f value 80000008 status 9000000a control abcd000b [ 198.913545] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 198.954577] ata2.00: configured for UDMA/133 [ 198.981932] usb 1-3: reset high-speed USB device number 2 using xhci_hcd [ 199.066764] [drm:wait_panel_status] Wait complete [ 199.066775] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off [ 199.066796] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003 [ 199.082708] [drm:edp_panel_vdd_on] Turning eDP port C VDD on [ 199.082731] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 199.111547] atkbd serio0: Failed to enable keyboard on isa0060/serio0 [ 199.154917] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880076ba9890 [ 199.154924] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880076ba9848 [ 199.154928] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880179450dc8 [ 199.154933] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880076ba9800 [ 199.154938] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880076ba9990 [ 199.154943] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880179450d80 [ 199.154947] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880076ba9a90 [ 199.154952] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880076ba9948 [ 199.154956] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880076ba9b90 [ 199.154961] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880076ba9900 [ 199.154966] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880076ba9c90 [ 199.154971] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880076ba9a00 [ 199.154975] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880076ba9a48 [ 199.154980] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880076ba9b48 [ 199.154984] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880076ba9b00 [ 199.154988] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880076ba9c48 [ 199.154993] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880076ba9c00 [ 199.190540] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 199.214085] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 199.214400] option 1-3:1.0: device disconnected [ 199.215803] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 199.215990] option 1-3:1.1: device disconnected [ 199.217021] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 [ 199.217216] option 1-3:1.2: device disconnected [ 199.218267] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3 [ 199.218608] option 1-3:1.5: device disconnected [ 199.218636] call 1-3+ returned 0 after 384751 usecs [ 199.230559] [drm:intel_dp_start_link_train] clock recovery OK [ 199.278550] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful [ 199.292881] [drm:g4x_check_srwm] SR watermark: display plane 107, cursor 2 [ 199.292885] [drm:g4x_check_srwm] SR watermark: display plane 211, cursor 2 [ 199.292892] [drm:cherryview_update_wm] Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=61, cursor=2, C: plane=2, cursor=2, SR: plane=107, cursor=2 [ 199.292908] [drm:intel_set_memory_cxsr] memory self-refresh is enabled [ 199.292935] [drm:intel_edp_backlight_on] [ 199.292939] [drm:intel_panel_enable_backlight] pipe B [ 199.292950] [drm:intel_panel_actually_set_backlight] set backlight PWM = 7812 [ 199.296754] [drm:i9xx_update_primary_plane] Writing base 000A0000 00000000 0 0 7680 [ 199.296820] [drm:intel_connector_check_state] [CONNECTOR:29:eDP-1] [ 199.296855] [drm:check_encoder_state] [ENCODER:21:TMDS-21] [ 199.296864] [drm:check_encoder_state] [ENCODER:26:TMDS-26] [ 199.296871] [drm:check_encoder_state] [ENCODER:28:TMDS-28] [ 199.296879] [drm:check_encoder_state] [ENCODER:34:TMDS-34] [ 199.296886] [drm:check_encoder_state] [ENCODER:36:TMDS-36] [ 199.296895] [drm:check_crtc_state] [CRTC:8] [ 199.296904] [drm:check_crtc_state] [CRTC:13] [ 199.301460] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 199.304572] [drm:check_crtc_state] [CRTC:18] [ 199.304586] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 199.322700] [drm:intel_connector_check_state] [CONNECTOR:29:eDP-1] [ 199.322731] [drm:check_encoder_state] [ENCODER:21:TMDS-21] [ 199.322739] [drm:check_encoder_state] [ENCODER:26:TMDS-26] [ 199.322746] [drm:check_encoder_state] [ENCODER:28:TMDS-28] [ 199.322754] [drm:check_encoder_state] [ENCODER:34:TMDS-34] [ 199.322761] [drm:check_encoder_state] [ENCODER:36:TMDS-36] [ 199.322769] [drm:check_crtc_state] [CRTC:8] [ 199.322779] [drm:check_crtc_state] [CRTC:13] [ 199.330585] [drm:check_crtc_state] [CRTC:18] [ 199.330600] [drm:intel_connector_check_state] [CONNECTOR:29:eDP-1] [ 199.330624] [drm:check_encoder_state] [ENCODER:21:TMDS-21] [ 199.330631] [drm:check_encoder_state] [ENCODER:26:TMDS-26] [ 199.330638] [drm:check_encoder_state] [ENCODER:28:TMDS-28] [ 199.330646] [drm:check_encoder_state] [ENCODER:34:TMDS-34] [ 199.330653] [drm:check_encoder_state] [ENCODER:36:TMDS-36] [ 199.330660] [drm:check_crtc_state] [CRTC:8] [ 199.330667] [drm:check_crtc_state] [CRTC:13] [ 199.338631] [drm:check_crtc_state] [CRTC:18] [ 199.338696] [drm:intel_dp_detect] [CONNECTOR:29:eDP-1] [ 199.340058] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 199.342655] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 199.342778] [drm:drm_helper_hpd_irq_event] [CONNECTOR:29:eDP-1] status updated from unknown to connected [ 199.343341] [drm:drm_fb_helper_hotplug_event] [ 199.343348] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:eDP-1] [ 199.343352] [drm:intel_dp_detect] [CONNECTOR:29:eDP-1] [ 199.346282] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 199.349014] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 199.349244] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 199.349264] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:eDP-1] probed modes : [ 199.349274] [drm:drm_mode_debug_printmodeline] Modeline 30:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 199.349279] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-1] [ 199.349283] [drm:intel_hdmi_detect] [CONNECTOR:22:HDMI-A-1] [ 199.349691] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 199.349697] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 199.349786] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-1] disconnected [ 199.349791] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1] [ 199.349794] [drm:intel_dp_detect] [CONNECTOR:27:DP-1] [ 199.349979] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1] disconnected [ 199.349983] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] [ 199.349986] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-2] [ 199.350355] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 r(1) [ 199.350360] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel [ 199.350445] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] disconnected [ 199.350449] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:DP-2] [ 199.350452] [drm:intel_dp_detect] [CONNECTOR:37:DP-2] [ 199.350652] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:DP-2] disconnected [ 199.350710] [drm:drm_setup_crtcs] [ 199.350778] [drm:drm_enable_connectors] connector 29 enabled? yes [ 199.350781] [drm:drm_enable_connectors] connector 22 enabled? no [ 199.350784] [drm:drm_enable_connectors] connector 27 enabled? no [ 199.350787] [drm:drm_enable_connectors] connector 35 enabled? no [ 199.350790] [drm:drm_enable_connectors] connector 37 enabled? no [ 199.350822] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 199.350826] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 [ 199.350832] [drm:intel_fb_initial_config] connector eDP-1 on pipe B [CRTC:13]: 1920x1080 [ 199.350835] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 199.350838] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 199.350841] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 199.350843] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping [ 199.350857] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 13 [ 199.351013] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 199.351131] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 199.351137] [drm:intel_modeset_stage_output_state] [CONNECTOR:29:eDP-1] to [CRTC:13] [ 199.351145] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 199.351181] [drm:intel_crtc_set_config] [CRTC:13] [FB:39] #connectors=1 (x y) (0 0) [ 199.351283] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0 [ 199.351287] [drm:intel_modeset_stage_output_state] [CONNECTOR:29:eDP-1] to [CRTC:13] [ 199.351291] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 199.351327] [drm:connected_sink_compute_bpp] [CONNECTOR:29:eDP-1] checking for sink bpp constrains [ 199.351334] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 199.351350] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 199.351353] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 199.351359] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 199.351365] [drm:intel_dump_pipe_config] [CRTC:13][modeset] config for pipe B [ 199.351367] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 199.351370] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 199.351375] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 199.351379] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 199.351383] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 199.351386] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 199.351388] [drm:intel_dump_pipe_config] requested mode: [ 199.351396] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 199.351398] [drm:intel_dump_pipe_config] adjusted mode: [ 199.351404] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 199.351410] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 199.351413] [drm:intel_dump_pipe_config] port clock: 270000 [ 199.351416] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 199.351419] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 199.351423] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 199.351425] [drm:intel_dump_pipe_config] ips: 0 [ 199.351428] [drm:intel_dump_pipe_config] double wide: 0 [ 199.351467] [drm:intel_crtc_set_config] [CRTC:18] [NOFB] [ 199.351595] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:18], mode_changed=0, fb_changed=0 [ 199.351599] [drm:intel_modeset_stage_output_state] [CONNECTOR:29:eDP-1] to [CRTC:13] [ 199.351604] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 199.360156] [drm:intel_crtc_set_config] [CRTC:13] [FB:39] #connectors=1 (x y) (0 0) [ 199.360301] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0 [ 199.360306] [drm:intel_modeset_stage_output_state] [CONNECTOR:29:eDP-1] to [CRTC:13] [ 199.360312] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 199.360344] [drm:connected_sink_compute_bpp] [CONNECTOR:29:eDP-1] checking for sink bpp constrains [ 199.360353] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 199.360367] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 199.360372] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 199.360377] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 199.360380] [drm:intel_dump_pipe_config] [CRTC:13][modeset] config for pipe B [ 199.360383] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 199.360386] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 199.360391] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 199.360395] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 199.360399] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 199.360402] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 199.360404] [drm:intel_dump_pipe_config] requested mode: [ 199.360412] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 199.360414] [drm:intel_dump_pipe_config] adjusted mode: [ 199.360420] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 199.360425] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 199.360428] [drm:intel_dump_pipe_config] port clock: 270000 [ 199.360431] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 199.360434] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 199.360437] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 199.360440] [drm:intel_dump_pipe_config] ips: 0 [ 199.360442] [drm:intel_dump_pipe_config] double wide: 0 [ 199.360574] call 0000:00:02.0+ returned 0 after 738362 usecs [ 199.360674] calling i2c-0+ @ 4224, parent: 0000:00:02.0 [ 199.360686] call i2c-0+ returned 0 after 2 usecs [ 199.360705] calling i2c-1+ @ 4224, parent: 0000:00:02.0 [ 199.360710] call i2c-1+ returned 0 after 1 usecs [ 199.360729] calling i2c-2+ @ 4224, parent: 0000:00:02.0 [ 199.360733] call i2c-2+ returned 0 after 1 usecs [ 199.360753] calling i2c-3+ @ 4224, parent: 0000:00:02.0 [ 199.360757] call i2c-3+ returned 0 after 1 usecs [ 199.360776] calling i2c-4+ @ 4224, parent: 0000:00:02.0 [ 199.360781] call i2c-4+ returned 0 after 1 usecs [ 199.360802] calling i2c-5+ @ 4224, parent: 0000:00:02.0 [ 199.360806] call i2c-5+ returned 0 after 1 usecs [ 199.360839] calling i2c-6+ @ 4224, parent: 0000:00:02.0 [ 199.360844] call i2c-6+ returned 0 after 1 usecs [ 199.360866] calling i2c-7+ @ 4224, parent: 0000:00:02.0 [ 199.360871] call i2c-7+ returned 0 after 1 usecs [ 199.360900] calling i2c-8+ @ 4224, parent: 0000:00:02.0 [ 199.360905] call i2c-8+ returned 0 after 1 usecs [ 199.360922] calling intel_backlight+ @ 4224, parent: card0-eDP-1 [ 199.360931] call intel_backlight+ returned 0 after 5 usecs [ 199.360957] calling input9+ @ 4224, parent: LNXVIDEO:00 [ 199.360965] call input9+ returned 0 after 4 usecs [ 199.467157] usb 1-5: No LPM exit latency info found, disabling LPM. [ 199.467690] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880076077700 [ 199.467696] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880076077748 [ 199.467702] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880076077790 [ 199.467708] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801794503c0 [ 199.467712] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880179450408 [ 199.469576] call 1-5+ returned 0 after 629780 usecs [ 199.620295] usb 1-6: reset high-speed USB device number 4 using xhci_hcd [ 199.786091] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007682aba0 [ 199.992863] call 1-6+ returned 0 after 1140642 usecs [ 199.992966] calling 1-6.2+ @ 4305, parent: 1-6 [ 199.992976] calling 1-6.1+ @ 4299, parent: 1-6 [ 199.993154] calling 1-6.5+ @ 4313, parent: 1-6 [ 200.066245] usb 1-6.2: reset high-speed USB device number 6 using xhci_hcd [ 200.151283] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007639d120 [ 200.318674] [drm:cherryview_enable_rps] GT fifo had a previous error 1080000 [ 200.318737] [drm:cherryview_enable_rps] GPLL enabled? yes [ 200.318742] [drm:cherryview_enable_rps] GPU status: 0x00281410 [ 200.318746] [drm:cherryview_enable_rps] current GPU freq: 200 MHz (20) [ 200.318750] [drm:cherryview_enable_rps] setting GPU freq to 400 MHz (40) [ 200.356656] call 1-6.2+ returned 0 after 355141 usecs [ 200.356748] calling 1-6.2.4+ @ 4316, parent: 1-6.2 [ 200.403254] usb 1-6.1: reset low-speed USB device number 5 using xhci_hcd [ 200.672255] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007682acc0 [ 200.672263] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007682ad20 [ 200.672367] usb 1-6.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 200.672430] usb 1-6.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 200.681763] call 1-6.1+ returned 0 after 672605 usecs [ 200.681932] calling input10+ @ 4224, parent: 0003:0461:0010.0001 [ 200.682124] call input10+ returned 0 after 178 usecs [ 200.682160] calling input11+ @ 4224, parent: 0003:0461:0010.0002 [ 200.682168] call input11+ returned 0 after 3 usecs [ 200.743131] usb 1-6.5: reset high-speed USB device number 7 using xhci_hcd [ 200.829109] call 1-6.5+ returned 0 after 816314 usecs [ 200.902915] usb 1-6.2.4: reset high-speed USB device number 8 using xhci_hcd [ 200.998264] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800036fac00 [ 200.998271] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800036fac48 [ 200.998275] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800036fac90 [ 200.998280] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800036facd8 [ 200.998284] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800036fad20 [ 201.000357] asix 1-6.2.4:1.0 eth1: unregister 'asix' usb-0000:00:14.0-6.2.4, ASIX AX88772 USB 2.0 Ethernet [ 201.021740] call 1-6.2.4+ returned 0 after 649366 usecs [ 201.022224] calling input12+ @ 4224, parent: pcspkr [ 201.022357] call input12+ returned 0 after 121 usecs [ 201.022556] PM: restore of devices complete after 2418.128 msecs [ 201.805307] asix 1-6.2.4:1.0 eth0: register 'asix' at usb-0000:00:14.0-6.2.4, ASIX AX88772 USB 2.0 Ethernet, 8c:ae:4c:fd:b1:57 [ 201.807997] option 1-3:1.0: GSM modem (1-port) converter detected [ 201.814127] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB0 [ 201.814963] option 1-3:1.1: GSM modem (1-port) converter detected [ 201.818690] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB1 [ 201.819014] option 1-3:1.2: GSM modem (1-port) converter detected [ 201.822827] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB2 [ 201.823168] option 1-3:1.5: GSM modem (1-port) converter detected [ 201.826917] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB3 [ 201.831155] PM: Image restored successfully. [ 201.831410] PM: Basic memory bitmaps freed [ 201.831419] Restarting tasks ... done. [ 201.985870] asix 1-6.2.4:1.0 eth1: renamed from eth0 [ 201.998656] systemd-udevd[4342]: renamed network interface eth0 to eth1 [ 202.090780] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off [ 202.090803] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 202.583415] asix 1-6.2.4:1.0 eth1: link down [ 202.586763] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 205.098997] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 205.102514] asix 1-6.2.4:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 223.625709] PM: Syncing filesystems ... done. [ 223.825313] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 223.827808] PM: Marking nosave pages: [mem 0x00000000-0x00000fff] [ 223.827818] PM: Marking nosave pages: [mem 0x0008f000-0x0008ffff] [ 223.827824] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff] [ 223.827834] PM: Marking nosave pages: [mem 0x20000000-0x201fffff] [ 223.827858] PM: Marking nosave pages: [mem 0x7accd000-0x7b80cfff] [ 223.827963] PM: Marking nosave pages: [mem 0x7b80e000-0x7b80efff] [ 223.827968] PM: Marking nosave pages: [mem 0x7b812000-0x7b812fff] [ 223.827973] PM: Marking nosave pages: [mem 0x7c000000-0xffffffff] [ 223.832965] PM: Basic memory bitmaps created [ 223.834012] PM: Preallocating image memory... done (allocated 96418 pages) [ 224.471109] PM: Allocated 385672 kbytes in 0.63 seconds (612.17 MB/s) [ 224.471115] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done. [ 224.477553] Suspending console(s) (use no_console_suspend to debug) [ 224.478229] calling input12+ @ 4224, parent: pcspkr [ 224.478242] call input12+ returned 0 after 4 usecs [ 224.478260] calling iTCO_wdt+ @ 4224, parent: 0000:00:1f.0 [ 224.478268] call iTCO_wdt+ returned 0 after 4 usecs [ 224.478528] calling 1-6.2.4+ @ 4321, parent: 1-6.2 [ 224.478763] calling input11+ @ 4224, parent: 0003:0461:0010.0002 [ 224.478811] calling 1-6.5+ @ 4322, parent: 1-6 [ 224.478824] call 1-6.5+ returned 0 after 6 usecs [ 224.479690] call 1-6.2.4+ returned 0 after 1125 usecs [ 224.479726] calling 1-6.2+ @ 4320, parent: 1-6 [ 224.479884] call 1-6.2+ returned 0 after 148 usecs [ 224.480471] call input11+ returned 0 after 1658 usecs [ 224.480669] calling input10+ @ 4224, parent: 0003:0461:0010.0001 [ 224.480716] call input10+ returned 0 after 40 usecs [ 224.480842] calling input9+ @ 4224, parent: LNXVIDEO:00 [ 224.480849] calling 1-6.1+ @ 4321, parent: 1-6 [ 224.480885] call input9+ returned 0 after 32 usecs [ 224.480958] calling intel_backlight+ @ 4224, parent: card0-eDP-1 [ 224.480970] call intel_backlight+ returned 0 after 6 usecs [ 224.481003] calling i2c-8+ @ 4224, parent: 0000:00:02.0 [ 224.481010] call i2c-8+ returned 0 after 2 usecs [ 224.481025] calling card0-DP-2+ @ 4224, parent: card0 [ 224.481034] call card0-DP-2+ returned 0 after 3 usecs [ 224.481049] calling card0-HDMI-A-2+ @ 4224, parent: card0 [ 224.481056] call card0-HDMI-A-2+ returned 0 after 1 usecs [ 224.481082] calling i2c-7+ @ 4224, parent: 0000:00:02.0 [ 224.481087] call i2c-7+ returned 0 after 1 usecs [ 224.481104] calling card0-eDP-1+ @ 4224, parent: card0 [ 224.481109] call card0-eDP-1+ returned 0 after 1 usecs [ 224.481138] calling i2c-6+ @ 4224, parent: 0000:00:02.0 [ 224.481143] call i2c-6+ returned 0 after 1 usecs [ 224.481158] calling card0-DP-1+ @ 4224, parent: card0 [ 224.481163] call card0-DP-1+ returned 0 after 1 usecs [ 224.481178] calling card0-HDMI-A-1+ @ 4224, parent: card0 [ 224.481183] call card0-HDMI-A-1+ returned 0 after 1 usecs [ 224.481394] calling i2c-5+ @ 4224, parent: 0000:00:02.0 [ 224.481401] call i2c-5+ returned 0 after 1 usecs [ 224.481477] calling i2c-4+ @ 4224, parent: 0000:00:02.0 [ 224.481484] call i2c-4+ returned 0 after 1 usecs [ 224.481510] calling i2c-3+ @ 4224, parent: 0000:00:02.0 [ 224.481517] call i2c-3+ returned 0 after 1 usecs [ 224.481546] calling i2c-2+ @ 4224, parent: 0000:00:02.0 [ 224.481551] call i2c-2+ returned 0 after 1 usecs [ 224.481578] calling i2c-1+ @ 4224, parent: 0000:00:02.0 [ 224.481583] call i2c-1+ returned 0 after 1 usecs [ 224.481606] calling i2c-0+ @ 4224, parent: 0000:00:02.0 [ 224.481610] call i2c-0+ returned 0 after 1 usecs [ 224.481629] calling card0+ @ 4224, parent: 0000:00:02.0 [ 224.481661] call card0+ returned 0 after 2 usecs [ 224.481678] calling renderD128+ @ 4224, parent: 0000:00:02.0 [ 224.481683] call renderD128+ returned 0 after 1 usecs [ 224.481698] calling controlD64+ @ 4224, parent: 0000:00:02.0 [ 224.481703] call controlD64+ returned 0 after 1 usecs [ 224.481733] calling input7+ @ 4224, parent: LNXPWRBN:00 [ 224.481782] call input7+ returned 0 after 41 usecs [ 224.481847] calling input6+ @ 4224, parent: PNP0C0E:00 [ 224.481889] call input6+ returned 0 after 35 usecs [ 224.481943] calling input5+ @ 4224, parent: PNP0C0C:00 [ 224.481983] call input5+ returned 0 after 33 usecs [ 224.482053] calling input3+ @ 4224, parent: PNP0C0D:00 [ 224.482061] call input3+ returned 0 after 3 usecs [ 224.482080] calling input2+ @ 4224, parent: serio0 [ 224.482117] call input2+ returned 0 after 31 usecs [ 224.482401] calling 1-5+ @ 4322, parent: usb1 [ 224.482424] call 1-5+ returned 0 after 15 usecs [ 224.483000] calling 1-3+ @ 4318, parent: usb1 [ 224.483124] calling 1:0:0:0+ @ 4322, parent: target1:0:0 [ 224.483141] call 1:0:0:0+ returned 0 after 9 usecs [ 224.483174] calling target1:0:0+ @ 4319, parent: host1 [ 224.483180] call target1:0:0+ returned 0 after 1 usecs [ 224.483206] calling rtc0+ @ 4224, parent: 00:07 [ 224.483213] call rtc0+ returned 0 after 1 usecs [ 224.483263] calling i8042+ @ 4224, parent: platform [ 224.483269] call i8042+ returned 0 after 1 usecs [ 224.483527] calling usb2+ @ 4322, parent: 0000:00:14.0 [ 224.483533] call usb2+ returned 0 after 1 usecs [ 224.483910] calling host1+ @ 4317, parent: ata2 [ 224.483916] call host1+ returned 0 after 1 usecs [ 224.483946] calling host0+ @ 4317, parent: ata1 [ 224.483950] call host0+ returned 0 after 1 usecs [ 224.484039] calling ata2+ @ 4316, parent: 0000:00:13.0 [ 224.484111] calling ata1+ @ 4317, parent: 0000:00:13.0 [ 224.484175] call ata1+ returned 0 after 56 usecs [ 224.484508] calling serial8250+ @ 4224, parent: platform [ 224.484518] call serial8250+ returned 0 after 3 usecs [ 224.484789] calling alarmtimer+ @ 4224, parent: platform [ 224.484795] call alarmtimer+ returned 0 after 1 usecs [ 224.484844] calling efi-framebuffer.0+ @ 4224, parent: platform [ 224.484850] call efi-framebuffer.0+ returned 0 after 1 usecs [ 224.484865] calling pcspkr+ @ 4224, parent: platform [ 224.484870] call pcspkr+ returned 0 after 1 usecs [ 224.485101] call 1-6.1+ returned 0 after 4145 usecs [ 224.485135] calling 1-6+ @ 4320, parent: usb1 [ 224.485316] call 1-6+ returned 0 after 170 usecs [ 224.486190] calling 00:07+ @ 4224, parent: pnp0 [ 224.486207] call 00:07+ returned 0 after 11 usecs [ 224.486223] calling 00:06+ @ 4224, parent: pnp0 [ 224.486229] call 00:06+ returned 0 after 2 usecs [ 224.486242] calling 00:05+ @ 4224, parent: pnp0 [ 224.486248] call 00:05+ returned 0 after 2 usecs [ 224.486262] calling 00:04+ @ 4224, parent: pnp0 [ 224.486268] call 00:04+ returned 0 after 2 usecs [ 224.486281] calling 00:03+ @ 4224, parent: pnp0 [ 224.486286] call 00:03+ returned 0 after 1 usecs [ 224.486299] calling 00:02+ @ 4224, parent: pnp0 [ 224.486304] call 00:02+ returned 0 after 1 usecs [ 224.486318] calling 00:01+ @ 4224, parent: pnp0 [ 224.486500] call 1-3+ returned 0 after 3410 usecs [ 224.486537] calling usb1+ @ 4322, parent: 0000:00:14.0 [ 224.487135] serial 00:01: disabled [ 224.487142] call 00:01+ returned 0 after 799 usecs [ 224.487162] calling 00:00+ @ 4224, parent: pnp0 [ 224.487168] call 00:00+ returned 0 after 2 usecs [ 224.487219] calling LNXPWRBN:00+ @ 4224, parent: LNXSYSTM:00 [ 224.487225] call LNXPWRBN:00+ returned 0 after 2 usecs [ 224.487239] calling PNP0C0B:00+ @ 4224, parent: platform [ 224.487248] call PNP0C0B:00+ returned 0 after 4 usecs [ 224.487264] calling MSFT0101:00+ @ 4224, parent: platform [ 224.487270] call MSFT0101:00+ returned 0 after 2 usecs [ 224.487286] calling ACPI000C:00+ @ 4224, parent: platform [ 224.487291] call ACPI000C:00+ returned 0 after 1 usecs [ 224.487306] calling INT33BD:00+ @ 4224, parent: platform [ 224.487311] call INT33BD:00+ returned 0 after 1 usecs [ 224.487327] calling INT33FF:03+ @ 4224, parent: platform [ 224.487332] call INT33FF:03+ returned 0 after 1 usecs [ 224.487347] calling INT33FF:02+ @ 4224, parent: platform [ 224.487353] call INT33FF:02+ returned 0 after 1 usecs [ 224.487368] calling INT33FF:01+ @ 4224, parent: platform [ 224.487375] call INT33FF:01+ returned 0 after 2 usecs [ 224.487394] calling INT33FF:00+ @ 4224, parent: platform [ 224.487399] call INT33FF:00+ returned 0 after 1 usecs [ 224.487416] calling PNP0C0E:00+ @ 4224, parent: platform [ 224.487422] call PNP0C0E:00+ returned 0 after 2 usecs [ 224.487439] calling PNP0C0C:00+ @ 4224, parent: platform [ 224.487445] call PNP0C0C:00+ returned 0 after 1 usecs [ 224.487462] calling PNP0103:00+ @ 4224, parent: platform [ 224.487467] call PNP0103:00+ returned 0 after 1 usecs [ 224.487483] calling PNP0C0D:00+ @ 4224, parent: platform [ 224.487488] call PNP0C0D:00+ returned 0 after 1 usecs [ 224.487504] calling ACPI0003:00+ @ 4224, parent: platform [ 224.487508] call ACPI0003:00+ returned 0 after 1 usecs [ 224.487521] call usb1+ returned 0 after 953 usecs [ 224.487524] calling INT33BB:01+ @ 4224, parent: pci0000:00 [ 224.487529] call INT33BB:01+ returned 0 after 1 usecs [ 224.487546] calling INT0800:00+ @ 4224, parent: 0000:00:1f.0 [ 224.487552] call INT0800:00+ returned 0 after 1 usecs [ 224.487568] calling INT33D2:00+ @ 4224, parent: PNP0C09:00 [ 224.487574] call INT33D2:00+ returned 0 after 1 usecs [ 224.487590] calling PNP0C0A:01+ @ 4224, parent: PNP0C09:00 [ 224.487595] call PNP0C0A:01+ returned 0 after 1 usecs [ 224.487610] calling PNP0C0A:00+ @ 4224, parent: PNP0C09:00 [ 224.487615] call PNP0C0A:00+ returned 0 after 1 usecs [ 224.487655] calling PNP0C09:00+ @ 4224, parent: 0000:00:1f.0 [ 224.487660] call PNP0C09:00+ returned 0 after 1 usecs [ 224.487723] call ata2+ returned 0 after 3591 usecs [ 224.487728] calling 0000:02:00.0+ @ 4322, parent: 0000:00:1c.1 [ 224.487734] call 0000:02:00.0+ returned 0 after 2 usecs [ 224.487760] calling 0000:00:1f.3+ @ 4316, parent: pci0000:00 [ 224.487775] call 0000:00:1f.3+ returned 0 after 9 usecs [ 224.487797] calling 0000:00:1f.0+ @ 4318, parent: pci0000:00 [ 224.487803] call 0000:00:1f.0+ returned 0 after 1 usecs [ 224.487811] calling 0000:00:1c.1+ @ 4316, parent: pci0000:00 [ 224.487821] call 0000:00:1c.1+ returned 0 after 6 usecs [ 224.487839] calling 0000:00:1c.0+ @ 4318, parent: pci0000:00 [ 224.487849] call 0000:00:1c.0+ returned 0 after 5 usecs [ 224.487874] calling 0000:00:1b.0+ @ 4316, parent: pci0000:00 [ 224.487896] calling 0000:00:1a.0+ @ 4318, parent: pci0000:00 [ 224.487901] call 0000:00:1a.0+ returned 0 after 1 usecs [ 224.487930] calling 0000:00:14.0+ @ 4322, parent: pci0000:00 [ 224.487938] call 0000:00:14.0+ returned 0 after 3 usecs [ 224.487962] calling 0000:00:13.0+ @ 4318, parent: pci0000:00 [ 224.488012] calling 0000:00:0b.0+ @ 4320, parent: pci0000:00 [ 224.488018] call 0000:00:0b.0+ returned 0 after 1 usecs [ 224.488050] calling LNXTHERM:00+ @ 4224, parent: LNXSYBUS:01 [ 224.488069] call 0000:00:13.0+ returned 0 after 99 usecs [ 224.488073] call LNXTHERM:00+ returned 0 after 15 usecs [ 224.488094] calling 0000:00:03.0+ @ 4321, parent: pci0000:00 [ 224.488106] call 0000:00:03.0+ returned 0 after 1 usecs [ 224.488133] calling 0000:00:00.0+ @ 4321, parent: pci0000:00 [ 224.488138] call 0000:00:00.0+ returned 0 after 1 usecs [ 224.488143] calling 0000:00:02.0+ @ 4318, parent: pci0000:00 [ 224.488159] [drm:intel_display_power_get] enabling always-on [ 224.488245] calling PNP0C0E:00+ @ 4224, parent: LNXSYBUS:00 [ 224.488251] call PNP0C0E:00+ returned 0 after 1 usecs [ 224.488267] calling PNP0C0C:00+ @ 4224, parent: LNXSYBUS:00 [ 224.488272] call PNP0C0C:00+ returned 0 after 1 usecs [ 224.488322] calling PNP0C0D:00+ @ 4224, parent: LNXSYBUS:00 [ 224.488328] call PNP0C0D:00+ returned 0 after 1 usecs [ 224.600927] call 0000:00:1b.0+ returned 0 after 110387 usecs [ 230.316613] [drm] stuck on blitter ring [ 230.349609] [drm] GPU HANG: ecode 8:2:0xfffefeff, reason: Ring hung, action: reset [ 230.349911] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace. [ 230.349913] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel [ 230.349914] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue. [ 230.349917] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it. [ 230.349919] [drm] GPU crash dump saved to /sys/class/drm/card0/error [ 230.351781] [drm:i915_error_work_func] resetting chip [ 230.352593] i915 0000:00:02.0: GEM idle failed, resume might fail [ 230.352635] pci_pm_freeze(): i915_pm_suspend+0x0/0x46 [i915] returns -11 [ 230.352645] dpm_run_callback(): pci_pm_freeze+0x0/0xba returns -11 [ 230.352651] call 0000:00:02.0+ returned -11 after 5726795 usecs [ 230.352664] PM: Device 0000:00:02.0 failed to freeze async: error -11 [ 230.355041] drm/i915: Resetting chip after gpu hang [ 230.355056] [drm:init_status_page] render ring hws offset: 0x00013000 [ 230.355143] [drm:init_status_page] bsd ring hws offset: 0x00037000 [ 230.355226] [drm:init_status_page] blitter ring hws offset: 0x0005a000 [ 230.355325] [drm:init_status_page] video enhancement ring hws offset: 0x0007d000 [ 230.355775] [drm:i9xx_update_primary_plane] Writing base 000A0000 00000000 0 0 7680 [ 230.557343] calling 0000:00:00.0+ @ 4321, parent: pci0000:00 [ 230.557354] call 0000:00:00.0+ returned 0 after 4 usecs [ 230.557377] calling 0000:00:03.0+ @ 4321, parent: pci0000:00 [ 230.557382] call 0000:00:03.0+ returned 0 after 1 usecs [ 230.557396] calling 0000:00:0b.0+ @ 4318, parent: pci0000:00 [ 230.557403] call 0000:00:0b.0+ returned 0 after 2 usecs [ 230.557426] calling 0000:00:13.0+ @ 4318, parent: pci0000:00 [ 230.557459] calling 0000:00:14.0+ @ 4321, parent: pci0000:00 [ 230.557532] usb usb1: root hub lost power or was reset [ 230.557538] usb usb2: root hub lost power or was reset [ 230.557589] call 0000:00:13.0+ returned 0 after 152 usecs [ 230.557619] calling 0000:00:1a.0+ @ 4318, parent: pci0000:00 [ 230.557625] call 0000:00:1a.0+ returned 0 after 2 usecs [ 230.557649] calling 0000:00:1b.0+ @ 4318, parent: pci0000:00 [ 230.557694] calling 0000:00:1c.0+ @ 4316, parent: pci0000:00 [ 230.557704] call 0000:00:1c.0+ returned 0 after 6 usecs [ 230.557728] calling 0000:00:1c.1+ @ 4316, parent: pci0000:00 [ 230.557736] call 0000:00:1c.1+ returned 0 after 4 usecs [ 230.557762] calling 0000:00:1f.0+ @ 4316, parent: pci0000:00 [ 230.557767] call 0000:00:1f.0+ returned 0 after 1 usecs [ 230.557789] calling 0000:00:1f.3+ @ 4316, parent: pci0000:00 [ 230.559001] calling 0000:02:00.0+ @ 4320, parent: 0000:00:1c.1 [ 230.559013] call 0000:02:00.0+ returned 0 after 4 usecs [ 230.559043] calling ata1+ @ 4320, parent: 0000:00:13.0 [ 230.559072] call ata1+ returned 0 after 23 usecs [ 230.559097] calling ata2+ @ 4320, parent: 0000:00:13.0 [ 230.559117] call ata2+ returned 0 after 15 usecs [ 230.559139] calling host0+ @ 4320, parent: ata1 [ 230.559148] call host0+ returned 0 after 5 usecs [ 230.559189] calling host1+ @ 4320, parent: ata2 [ 230.559197] call host1+ returned 0 after 3 usecs [ 230.559533] calling PNP0C0A:00+ @ 4224, parent: PNP0C09:00 [ 230.559609] calling target1:0:0+ @ 4312, parent: host1 [ 230.559617] call target1:0:0+ returned 0 after 4 usecs [ 230.559641] calling 1:0:0:0+ @ 4312, parent: target1:0:0 [ 230.559673] call 1:0:0:0+ returned 0 after 27 usecs [ 230.560584] xhci_hcd 0000:00:14.0: irq 116 for MSI/MSI-X [ 230.561314] call 0000:00:14.0+ returned 0 after 3757 usecs [ 230.561360] calling usb2+ @ 4299, parent: 0000:00:14.0 [ 230.561411] sd 1:0:0:0: [sda] Starting disk [ 230.561561] calling usb1+ @ 4320, parent: 0000:00:14.0 [ 230.562040] call PNP0C0A:00+ returned 0 after 2439 usecs [ 230.562054] calling PNP0C0A:01+ @ 4224, parent: PNP0C09:00 [ 230.562081] call 0000:00:1f.3+ returned 0 after 4183 usecs [ 230.562872] call PNP0C0A:01+ returned 0 after 788 usecs [ 230.563672] calling ACPI0003:00+ @ 4224, parent: LNXSYBUS:00 [ 230.564137] call ACPI0003:00+ returned 0 after 445 usecs [ 230.564151] calling PNP0C0D:00+ @ 4224, parent: LNXSYBUS:00 [ 230.565020] call PNP0C0D:00+ returned 0 after 840 usecs [ 230.565056] calling PNP0C0C:00+ @ 4224, parent: LNXSYBUS:00 [ 230.565062] call PNP0C0C:00+ returned 0 after 2 usecs [ 230.565071] calling PNP0C0E:00+ @ 4224, parent: LNXSYBUS:00 [ 230.565076] call PNP0C0E:00+ returned 0 after 1 usecs [ 230.565172] calling LNXTHERM:00+ @ 4224, parent: LNXSYBUS:01 [ 230.566637] call LNXTHERM:00+ returned 0 after 1423 usecs [ 230.568312] calling PNP0C09:00+ @ 4224, parent: 0000:00:1f.0 [ 230.568320] call PNP0C09:00+ returned 0 after 2 usecs [ 230.568330] calling PNP0C0A:00+ @ 4224, parent: PNP0C09:00 [ 230.568335] call PNP0C0A:00+ returned 0 after 1 usecs [ 230.568345] calling PNP0C0A:01+ @ 4224, parent: PNP0C09:00 [ 230.568350] call PNP0C0A:01+ returned 0 after 1 usecs [ 230.568361] calling INT33D2:00+ @ 4224, parent: PNP0C09:00 [ 230.568365] call INT33D2:00+ returned 0 after 1 usecs [ 230.568375] calling INT0800:00+ @ 4224, parent: 0000:00:1f.0 [ 230.568380] call INT0800:00+ returned 0 after 1 usecs [ 230.568390] calling INT33BB:01+ @ 4224, parent: pci0000:00 [ 230.568395] call INT33BB:01+ returned 0 after 1 usecs [ 230.568406] calling ACPI0003:00+ @ 4224, parent: platform [ 230.568411] call ACPI0003:00+ returned 0 after 1 usecs [ 230.568422] calling PNP0C0D:00+ @ 4224, parent: platform [ 230.568427] call PNP0C0D:00+ returned 0 after 1 usecs [ 230.568436] calling PNP0103:00+ @ 4224, parent: platform [ 230.568441] call PNP0103:00+ returned 0 after 1 usecs [ 230.568451] calling PNP0C0C:00+ @ 4224, parent: platform [ 230.568456] call PNP0C0C:00+ returned 0 after 1 usecs [ 230.568467] calling PNP0C0E:00+ @ 4224, parent: platform [ 230.568472] call PNP0C0E:00+ returned 0 after 1 usecs [ 230.568482] calling INT33FF:00+ @ 4224, parent: platform [ 230.568487] call INT33FF:00+ returned 0 after 1 usecs [ 230.568497] calling INT33FF:01+ @ 4224, parent: platform [ 230.568502] call INT33FF:01+ returned 0 after 1 usecs [ 230.568513] calling INT33FF:02+ @ 4224, parent: platform [ 230.568518] call INT33FF:02+ returned 0 after 1 usecs [ 230.568527] calling INT33FF:03+ @ 4224, parent: platform [ 230.568532] call INT33FF:03+ returned 0 after 1 usecs [ 230.568541] calling INT33BD:00+ @ 4224, parent: platform [ 230.568546] call INT33BD:00+ returned 0 after 1 usecs [ 230.568556] calling ACPI000C:00+ @ 4224, parent: platform [ 230.568561] call ACPI000C:00+ returned 0 after 1 usecs [ 230.568570] calling MSFT0101:00+ @ 4224, parent: platform [ 230.568575] call MSFT0101:00+ returned 0 after 1 usecs [ 230.568587] calling PNP0C0B:00+ @ 4224, parent: platform [ 230.573515] snd_hda_intel 0000:00:1b.0: irq 118 for MSI/MSI-X [ 230.574308] call PNP0C0B:00+ returned 0 after 5579 usecs [ 230.574323] calling LNXPWRBN:00+ @ 4224, parent: LNXSYSTM:00 [ 230.574329] call LNXPWRBN:00+ returned 0 after 2 usecs [ 230.574358] calling 00:00+ @ 4224, parent: pnp0 [ 230.574365] call 00:00+ returned 0 after 3 usecs [ 230.574374] calling 00:01+ @ 4224, parent: pnp0 [ 230.574388] call 00:01+ returned 0 after 9 usecs [ 230.574397] calling 00:02+ @ 4224, parent: pnp0 [ 230.574402] call 00:02+ returned 0 after 1 usecs [ 230.574412] calling 00:03+ @ 4224, parent: pnp0 [ 230.574417] call 00:03+ returned 0 after 1 usecs [ 230.574425] calling 00:04+ @ 4224, parent: pnp0 [ 230.574431] call 00:04+ returned 0 after 2 usecs [ 230.574441] calling 00:05+ @ 4224, parent: pnp0 [ 230.574447] call 00:05+ returned 0 after 2 usecs [ 230.574456] calling 00:06+ @ 4224, parent: pnp0 [ 230.574462] call 00:06+ returned 0 after 2 usecs [ 230.574470] calling 00:07+ @ 4224, parent: pnp0 [ 230.574482] rtc_cmos 00:07: System wakeup disabled by ACPI [ 230.574489] call 00:07+ returned 0 after 14 usecs [ 230.575097] calling pcspkr+ @ 4224, parent: platform [ 230.575105] call pcspkr+ returned 0 after 2 usecs [ 230.575116] calling efi-framebuffer.0+ @ 4224, parent: platform [ 230.575121] call efi-framebuffer.0+ returned 0 after 1 usecs [ 230.575152] calling alarmtimer+ @ 4224, parent: platform [ 230.575159] call alarmtimer+ returned 0 after 2 usecs [ 230.575305] calling serial8250+ @ 4224, parent: platform [ 230.575315] call serial8250+ returned 0 after 3 usecs [ 230.575689] calling i8042+ @ 4224, parent: platform [ 230.576079] call i8042+ returned 0 after 373 usecs [ 230.576120] calling serio0+ @ 4224, parent: i8042 [ 230.576158] call serio0+ returned 0 after 32 usecs [ 230.576232] calling serio1+ @ 4224, parent: i8042 [ 230.576264] call serio1+ returned 0 after 25 usecs [ 230.576370] calling rtc0+ @ 4224, parent: 00:07 [ 230.576379] call rtc0+ returned 0 after 2 usecs [ 230.576501] calling input2+ @ 4224, parent: serio0 [ 230.576514] call input2+ returned 0 after 8 usecs [ 230.576591] calling input3+ @ 4224, parent: PNP0C0D:00 [ 230.576600] call input3+ returned 0 after 3 usecs [ 230.576623] calling input5+ @ 4224, parent: PNP0C0C:00 [ 230.576630] call input5+ returned 0 after 3 usecs [ 230.576647] calling input6+ @ 4224, parent: PNP0C0E:00 [ 230.576655] call input6+ returned 0 after 3 usecs [ 230.576671] calling input7+ @ 4224, parent: LNXPWRBN:00 [ 230.576679] call input7+ returned 0 after 3 usecs [ 230.576724] calling i2c-0+ @ 4224, parent: 0000:00:02.0 [ 230.576730] call i2c-0+ returned 0 after 2 usecs [ 230.576746] calling i2c-1+ @ 4224, parent: 0000:00:02.0 [ 230.576751] call i2c-1+ returned 0 after 1 usecs [ 230.576768] calling i2c-2+ @ 4224, parent: 0000:00:02.0 [ 230.576773] call i2c-2+ returned 0 after 1 usecs [ 230.576792] calling i2c-3+ @ 4224, parent: 0000:00:02.0 [ 230.576797] call i2c-3+ returned 0 after 1 usecs [ 230.576816] calling i2c-4+ @ 4224, parent: 0000:00:02.0 [ 230.576821] call i2c-4+ returned 0 after 1 usecs [ 230.576841] calling i2c-5+ @ 4224, parent: 0000:00:02.0 [ 230.576846] call i2c-5+ returned 0 after 1 usecs [ 230.576879] calling i2c-6+ @ 4224, parent: 0000:00:02.0 [ 230.576884] call i2c-6+ returned 0 after 1 usecs [ 230.576933] calling i2c-7+ @ 4224, parent: 0000:00:02.0 [ 230.576940] call i2c-7+ returned 0 after 1 usecs [ 230.576971] calling i2c-8+ @ 4224, parent: 0000:00:02.0 [ 230.576976] call i2c-8+ returned 0 after 1 usecs [ 230.576993] calling intel_backlight+ @ 4224, parent: card0-eDP-1 [ 230.577003] call intel_backlight+ returned 0 after 5 usecs [ 230.577029] calling input9+ @ 4224, parent: LNXVIDEO:00 [ 230.577036] call input9+ returned 0 after 3 usecs [ 230.583884] call 0000:00:1b.0+ returned 0 after 25610 usecs [ 230.662826] call usb2+ returned 0 after 99075 usecs [ 230.775999] call usb1+ returned 0 after 209396 usecs [ 230.776074] calling 1-6+ @ 4277, parent: usb1 [ 230.776122] calling 1-3+ @ 4312, parent: usb1 [ 230.776143] calling 1-5+ @ 4269, parent: usb1 [ 230.799973] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [ 230.866283] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 230.907324] ata2.00: configured for UDMA/133 [ 230.930000] usb 1-6: reset high-speed USB device number 4 using xhci_hcd [ 231.055987] atkbd serio0: Failed to enable keyboard on isa0060/serio0 [ 231.095475] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007682aba0 [ 231.249073] usb 1-3: reset high-speed USB device number 2 using xhci_hcd [ 231.301087] call 1-6+ returned 0 after 512673 usecs [ 231.301139] calling 1-6.2+ @ 4328, parent: 1-6 [ 231.301248] calling 1-6.1+ @ 4263, parent: 1-6 [ 231.301350] calling 1-6.5+ @ 1454, parent: 1-6 [ 231.423466] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880076ba9890 [ 231.423474] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880076ba9848 [ 231.423479] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880179450dc8 [ 231.423485] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880076ba9800 [ 231.423489] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880076ba9990 [ 231.423494] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880179450d80 [ 231.423498] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880076ba9a90 [ 231.423503] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880076ba9948 [ 231.423507] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880076ba9b90 [ 231.423513] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880076ba9900 [ 231.423517] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880076ba9c90 [ 231.423523] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880076ba9a00 [ 231.423527] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880076ba9a48 [ 231.423532] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880076ba9b48 [ 231.423536] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880076ba9b00 [ 231.423540] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880076ba9c48 [ 231.423545] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880076ba9c00 [ 231.479412] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 231.479611] option 1-3:1.0: device disconnected [ 231.485815] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 231.486027] option 1-3:1.1: device disconnected [ 231.487186] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 [ 231.487377] option 1-3:1.2: device disconnected [ 231.489163] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3 [ 231.489340] option 1-3:1.5: device disconnected [ 231.489374] call 1-3+ returned 0 after 696496 usecs [ 231.568947] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 231.735028] usb 1-5: No LPM exit latency info found, disabling LPM. [ 231.735595] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880076077700 [ 231.735601] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880076077748 [ 231.735607] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880076077790 [ 231.735612] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801794503c0 [ 231.735616] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880179450408 [ 231.737484] call 1-5+ returned 0 after 938761 usecs [ 231.808852] usb 1-6.2: reset high-speed USB device number 6 using xhci_hcd [ 231.893686] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007639d120 [ 232.099234] call 1-6.2+ returned 0 after 779345 usecs [ 232.099296] calling 1-6.2.4+ @ 1043, parent: 1-6.2 [ 232.146148] usb 1-6.1: reset low-speed USB device number 5 using xhci_hcd [ 232.316092] [drm:cherryview_enable_rps] GT fifo had a previous error 1080000 [ 232.316278] [drm:cherryview_enable_rps] GPLL enabled? yes [ 232.316282] [drm:cherryview_enable_rps] GPU status: 0x00281410 [ 232.316287] [drm:cherryview_enable_rps] current GPU freq: 200 MHz (20) [ 232.316290] [drm:cherryview_enable_rps] setting GPU freq to 400 MHz (40) [ 232.413390] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007682acc0 [ 232.413398] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007682ad20 [ 232.413502] usb 1-6.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 232.413563] usb 1-6.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 232.422725] call 1-6.1+ returned 0 after 1095137 usecs [ 232.422879] calling input10+ @ 4224, parent: 0003:0461:0010.0001 [ 232.422982] call input10+ returned 0 after 92 usecs [ 232.423142] calling input11+ @ 4224, parent: 0003:0461:0010.0002 [ 232.423151] call input11+ returned 0 after 2 usecs [ 232.423212] calling input12+ @ 4224, parent: pcspkr [ 232.423239] call input12+ returned 0 after 23 usecs [ 232.484584] usb 1-6.5: reset high-speed USB device number 7 using xhci_hcd [ 232.571290] call 1-6.5+ returned 0 after 1240108 usecs [ 232.645165] usb 1-6.2.4: reset high-speed USB device number 8 using xhci_hcd [ 232.740773] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800036fac00 [ 232.740781] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800036fac48 [ 232.740786] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800036fac90 [ 232.740790] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800036facd8 [ 232.740795] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800036fad20 [ 232.742896] asix 1-6.2.4:1.0 eth1: unregister 'asix' usb-0000:00:14.0-6.2.4, ASIX AX88772 USB 2.0 Ethernet [ 232.758252] call 1-6.2.4+ returned 0 after 643471 usecs [ 232.758497] PM: restore of devices complete after 2201.165 msecs [ 233.537266] asix 1-6.2.4:1.0 eth0: register 'asix' at usb-0000:00:14.0-6.2.4, ASIX AX88772 USB 2.0 Ethernet, 8c:ae:4c:fd:b1:57 [ 233.538538] option 1-3:1.0: GSM modem (1-port) converter detected [ 233.542300] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB0 [ 233.542695] option 1-3:1.1: GSM modem (1-port) converter detected [ 233.546364] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB2 [ 233.546684] option 1-3:1.2: GSM modem (1-port) converter detected [ 233.550253] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB4 [ 233.550550] option 1-3:1.5: GSM modem (1-port) converter detected [ 233.554248] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB5 [ 233.558269] PM: Basic memory bitmaps freed [ 233.558280] Restarting tasks ... done. [ 233.666693] asix 1-6.2.4:1.0 eth1: renamed from eth0 [ 233.677357] systemd-udevd[4533]: renamed network interface eth0 to eth1 [ 234.297113] asix 1-6.2.4:1.0 eth1: link down [ 234.300415] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 235.573494] init: modemmanager main process (3580) killed by ABRT signal [ 235.573593] init: modemmanager main process ended, respawning [ 236.793791] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 236.795726] asix 1-6.2.4:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1