[ 1.650647] calling software_resume+0x0/0x294 @ 1 [ 1.650653] PM: Hibernation image not present or could not be loaded. [ 1.650660] initcall software_resume+0x0/0x294 returned -2 after 5 usecs [ 1.650717] Warning: unable to open an initial console. [ 1.865196] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [ 1.936401] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.936996] ata2.00: ATA-8: INTEL SSDSC2BP240G4, L2010420, max UDMA/133 [ 1.937013] ata2.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 1.937991] ata2.00: configured for UDMA/133 [ 1.938736] scsi 1:0:0:0: Direct-Access ATA INTEL SSDSC2BP24 0420 PQ: 0 ANSI: 5 [ 1.939429] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 1.939478] sd 1:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB) [ 1.939888] sd 1:0:0:0: [sda] Write Protect is off [ 1.939901] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.940027] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.942439] sda: sda1 sda2 sda3 [ 1.943420] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.956903] Freeing unused kernel memory: 23208K (ffffffff81c45000 - ffffffff832ef000) [ 1.992259] usb 1-2: new low-speed USB device number 2 using xhci_hcd [ 2.070487] dracut: dracut-018-35.git20120510.fc17 [ 2.120230] atkbd serio0: Failed to enable keyboard on isa0060/serio0 [ 2.120409] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 2.159777] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a [ 2.159795] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.159805] usb 1-2: Product: USB Optical Mouse [ 2.159813] usb 1-2: Manufacturer: Logitech [ 2.160047] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.162320] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:046D:C05A.0001/input/input2 [ 2.162623] hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-2/input0 [ 2.179209] udevd[1254]: starting version 182 [ 2.230424] calling drm_core_init+0x0/0x102 [drm] @ 1262 [ 2.230478] [drm] Initialized drm 1.1.0 20060810 [ 2.230520] initcall drm_core_init+0x0/0x102 [drm] returned 0 after 58 usecs [ 2.232095] calling acpi_video_init+0x0/0x87 [video] @ 1262 [ 2.232126] initcall acpi_video_init+0x0/0x87 [video] returned 0 after 15 usecs [ 2.232488] calling acpi_button_driver_init+0x0/0xc [button] @ 1262 [ 2.232742] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3 [ 2.233373] ACPI: Lid Switch [LID0] [ 2.233570] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4 [ 2.234048] ACPI: Power Button [PWRB] [ 2.234238] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5 [ 2.234395] ACPI: Sleep Button [SLPB] [ 2.234554] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 2.235068] ACPI: Power Button [PWRF] [ 2.235146] initcall acpi_button_driver_init+0x0/0xc [button] returned 0 after 2579 usecs [ 2.243030] calling i915_init+0x0/0x88 [i915] @ 1262 [ 2.247757] [drm:i915_dump_device_info] i915 device info: gen=8, pciid=0x22b0 rev=0x15 flags=need_gfx_hws,is_valleyview,is_preliminary,has_hotplug, [ 2.247802] [drm:intel_detect_pch] No PCH found. [ 2.248016] [drm] Memory usable by graphics device = 2048M [ 2.248030] [drm:i915_gem_gtt_init] GMADR size = 256M [ 2.248034] [drm:i915_gem_gtt_init] GTT stolen size = 32M [ 2.248038] [drm:i915_gem_gtt_init] ppgtt mode: 1 [ 2.248043] [drm] Replacing VGA console driver [ 2.250684] [drm:intel_opregion_setup] graphic opregion physical addr: 0x7b65d018 [ 2.250713] [drm:intel_opregion_setup] Public ACPI methods supported [ 2.250717] [drm:intel_opregion_setup] ASLE supported [ 2.250911] i915 0000:00:02.0: irq 117 for MSI/MSI-X [ 2.250934] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.250946] [drm] Driver supports precise vblank timestamp query. [ 2.250956] [drm:init_vbt_defaults] Set default to SSC at 100000 kHz [ 2.250962] [drm:validate_vbt] Using VBT from OpRegion: $VBT CHERRYVIEW d [ 2.250969] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 2.250973] [drm:parse_general_definitions] crt_ddc_bus_pin: 2 [ 2.250978] [drm:parse_lfp_panel_data] DRRS supported mode is seamless [ 2.250984] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [ 2.250992] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 2.250997] [drm:parse_lfp_panel_data] VBT initial LVDS value 0 [ 2.251002] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255 [ 2.251007] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT [ 2.251012] [drm:parse_driver_features] DRRS State Enabled:1 [ 2.251033] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 2.251123] [drm:i915_gem_init_stolen [i915]] *ERROR* conflict detected with stolen region: [0x7ce00000 - 0x7ee00000] [ 2.251138] [drm:intel_display_power_get] enabling always-on [ 2.251142] [drm:intel_display_power_get] enabling pipe-a [ 2.256238] [drm:intel_display_power_get] enabling dpio-common-bc [ 2.262232] [drm:intel_display_power_get] enabling dpio-common-d [ 2.284300] [drm:intel_modeset_init] 3 display pipes available. [ 2.284340] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.284840] [drm:intel_dp_init_connector] Adding DP connector on port B [ 2.284955] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1 [ 2.285347] [drm:intel_dp_init_connector] Adding eDP connector on port C [ 2.297249] [drm:vlv_initial_power_sequencer_setup] initial power sequencer for port C: pipe B [ 2.297262] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 [ 2.297267] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 2.297273] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600 [ 2.297277] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200 [ 2.297286] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06 [ 2.309208] [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-eDP-1 [ 2.315285] usb 1-3: new high-speed USB device number 3 using xhci_hcd [ 2.357208] [drm:edp_panel_vdd_on] Turning eDP port C VDD on [ 2.357220] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000d [ 2.391263] [drm:intel_dp_get_dpcd] DPCD: 12 0a 82 41 00 00 01 80 02 00 00 00 0f 0b 00 [ 2.431269] [drm:intel_dp_get_dpcd] Detected EDP PSR Panel. [ 2.443270] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06 [ 2.491450] usb 1-3: New USB device found, idVendor=12d1, idProduct=1573 [ 2.491468] usb 1-3: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [ 2.491478] usb 1-3: Product: HUAWEI Mobile [ 2.491486] usb 1-3: Manufacturer: HUAWEI Technology [ 2.491494] usb 1-3: SerialNumber: 0123456789ABCDEF [ 2.555824] calling usb_serial_init+0x0/0x19d [usbserial] @ 1266 [ 2.555967] usbcore: registered new interface driver usbserial [ 2.556022] usbcore: registered new interface driver usbserial_generic [ 2.556072] usbserial: USB Serial support registered for generic [ 2.556096] initcall usb_serial_init+0x0/0x19d [usbserial] returned 0 after 248 usecs [ 2.558179] calling usb_serial_module_init+0x0/0x1a [option] @ 1278 [ 2.558267] usbcore: registered new interface driver option [ 2.558324] usbserial: USB Serial support registered for GSM modem (1-port) [ 2.558449] option 1-3:1.0: GSM modem (1-port) converter detected [ 2.558680] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB0 [ 2.558722] option 1-3:1.1: GSM modem (1-port) converter detected [ 2.558901] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB1 [ 2.558939] option 1-3:1.2: GSM modem (1-port) converter detected [ 2.559123] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB2 [ 2.559268] option 1-3:1.5: GSM modem (1-port) converter detected [ 2.559435] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB3 [ 2.559478] initcall usb_serial_module_init+0x0/0x1a [option] returned 0 after 1238 usecs [ 2.566259] tsc: Refined TSC clocksource calibration: 1359.955 MHz [ 2.705273] usb 1-5: new full-speed USB device number 4 using xhci_hcd [ 2.870370] usb 1-5: No LPM exit latency info found, disabling LPM. [ 2.871548] usb 1-5: New USB device found, idVendor=8087, idProduct=0a2a [ 2.871561] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.025333] usb 1-6: new high-speed USB device number 5 using xhci_hcd [ 3.190322] usb 1-6: New USB device found, idVendor=0424, idProduct=4604 [ 3.190340] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.191138] hub 1-6:1.0: USB hub found [ 3.191249] hub 1-6:1.0: 5 ports detected [ 3.466544] usb 1-6.1: new low-speed USB device number 6 using xhci_hcd [ 3.556892] usb 1-6.1: New USB device found, idVendor=413c, idProduct=2107 [ 3.556910] usb 1-6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.556921] usb 1-6.1: Product: Dell USB Entry Keyboard [ 3.556930] usb 1-6.1: Manufacturer: DELL [ 3.557206] usb 1-6.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 3.561161] input: DELL Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.1/1-6.1:1.0/0003:413C:2107.0002/input/input8 [ 3.561474] hid-generic 0003:413C:2107.0002: input,hidraw1: USB HID v1.11 Keyboard [DELL Dell USB Entry Keyboard] on usb-0000:00:14.0-6.1/input0 [ 3.566416] Switched to clocksource tsc [ 3.634297] usb 1-6.2: new high-speed USB device number 7 using xhci_hcd [ 3.741106] usb 1-6.2: New USB device found, idVendor=0b95, idProduct=7720 [ 3.741124] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.741135] usb 1-6.2: Product: AX88772 [ 3.741143] usb 1-6.2: SerialNumber: 0009D9 [ 4.509138] asix 1-6.2:1.0 eth0: register 'asix' at usb-0000:00:14.0-6.2, ASIX AX88772 USB 2.0 Ethernet, 00:10:60:2c:0a:70 [ 4.582339] usb 1-6.5: new high-speed USB device number 8 using xhci_hcd [ 4.667165] usb 1-6.5: New USB device found, idVendor=0424, idProduct=2530 [ 4.667179] usb 1-6.5: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 4.667190] usb 1-6.5: Product: Bridge device [ 5.624417] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 5.624426] [drm:intel_dp_drrs_init] DRRS not supported [ 5.624433] [drm:intel_edp_init_connector] using pipe B for initial backlight setup [ 5.624446] [drm:intel_panel_setup_backlight] Connector eDP-1 backlight initialized, enabled, brightness 7812/7812 [ 5.624632] [drm:intel_dp_init_connector] Adding DP connector on port D [ 5.624727] [drm:intel_dp_aux_init] registering DPDDC-D bus for card0-DP-2 [ 5.625076] [drm:intel_dsi_init] [ 5.625092] [drm:intel_modeset_readout_hw_state] [CRTC:8] hw state readout: disabled [ 5.632356] [drm:intel_modeset_readout_hw_state] [CRTC:13] hw state readout: enabled [ 5.632365] [drm:intel_modeset_readout_hw_state] [CRTC:18] hw state readout: disabled [ 5.632373] [drm:intel_modeset_readout_hw_state] [ENCODER:21:TMDS-21] hw state readout: disabled, pipe A [ 5.632380] [drm:intel_modeset_readout_hw_state] [ENCODER:26:TMDS-26] hw state readout: disabled, pipe A [ 5.632392] [drm:intel_dp_get_config] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp [ 5.632397] [drm:intel_modeset_readout_hw_state] [ENCODER:28:TMDS-28] hw state readout: enabled, pipe B [ 5.632403] [drm:intel_modeset_readout_hw_state] [ENCODER:34:TMDS-34] hw state readout: disabled, pipe A [ 5.632409] [drm:intel_modeset_readout_hw_state] [ENCODER:36:TMDS-36] hw state readout: disabled, pipe A [ 5.632416] [drm:intel_modeset_readout_hw_state] [CONNECTOR:29:eDP-1] hw state readout: enabled [ 5.632422] [drm:intel_modeset_readout_hw_state] [CONNECTOR:22:HDMI-A-1] hw state readout: disabled [ 5.632428] [drm:intel_modeset_readout_hw_state] [CONNECTOR:27:DP-1] hw state readout: disabled [ 5.632434] [drm:intel_modeset_readout_hw_state] [CONNECTOR:35:HDMI-A-2] hw state readout: disabled [ 5.632440] [drm:intel_modeset_readout_hw_state] [CONNECTOR:37:DP-2] hw state readout: disabled [ 5.632448] [drm:i915_get_vblank_timestamp] crtc 0 is disabled [ 5.632456] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe A [ 5.632460] [drm:i915_get_vblank_timestamp] crtc 0 is disabled [ 5.632464] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe A [ 5.632471] [drm:intel_dump_pipe_config] [CRTC:8][setup_hw_state] config for pipe A [ 5.632474] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 5.632478] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 5.632484] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5.632489] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5.632494] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 5.632498] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 5.632502] [drm:intel_dump_pipe_config] requested mode: [ 5.632509] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 5.632512] [drm:intel_dump_pipe_config] adjusted mode: [ 5.632518] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 5.632524] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 5.632528] [drm:intel_dump_pipe_config] port clock: 0 [ 5.632532] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 5.632537] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 5.632541] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 5.632545] [drm:intel_dump_pipe_config] ips: 0 [ 5.632548] [drm:intel_dump_pipe_config] double wide: 0 [ 5.632557] [drm:intel_dump_pipe_config] [CRTC:13][setup_hw_state] config for pipe B [ 5.632561] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 5.632565] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 5.632571] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5.632576] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 5.632581] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 5.632585] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 5.632589] [drm:intel_dump_pipe_config] requested mode: [ 5.632595] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 1920 0 0 0 1080 0 0 0 0x0 0x0 [ 5.632599] [drm:intel_dump_pipe_config] adjusted mode: [ 5.632605] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa [ 5.632612] [drm:intel_dump_crtc_timings] crtc timings: 138779 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x0 flags: 0xa [ 5.632615] [drm:intel_dump_pipe_config] port clock: 270000 [ 5.632619] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 5.632624] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 5.632629] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 5.632632] [drm:intel_dump_pipe_config] ips: 0 [ 5.632636] [drm:intel_dump_pipe_config] double wide: 0 [ 5.632641] [drm:i915_get_vblank_timestamp] crtc 2 is disabled [ 5.632647] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C [ 5.632651] [drm:i915_get_vblank_timestamp] crtc 2 is disabled [ 5.632655] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C [ 5.632660] [drm:intel_dump_pipe_config] [CRTC:18][setup_hw_state] config for pipe C [ 5.632663] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 5.632667] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 5.632673] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5.632678] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5.632683] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 5.632687] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 5.632690] [drm:intel_dump_pipe_config] requested mode: [ 5.632697] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 5.632700] [drm:intel_dump_pipe_config] adjusted mode: [ 5.632706] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 5.632712] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 5.632716] [drm:intel_dump_pipe_config] port clock: 0 [ 5.632720] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 5.632724] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 5.632729] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 5.632733] [drm:intel_dump_pipe_config] ips: 0 [ 5.632736] [drm:intel_dump_pipe_config] double wide: 0 [ 5.632743] [drm:intel_connector_check_state] [CONNECTOR:29:eDP-1] [ 5.632753] [drm:check_encoder_state] [ENCODER:21:TMDS-21] [ 5.632759] [drm:check_encoder_state] [ENCODER:26:TMDS-26] [ 5.632764] [drm:check_encoder_state] [ENCODER:28:TMDS-28] [ 5.632769] [drm:check_encoder_state] [ENCODER:34:TMDS-34] [ 5.632775] [drm:check_encoder_state] [ENCODER:36:TMDS-36] [ 5.632780] [drm:check_crtc_state] [CRTC:8] [ 5.632786] [drm:check_crtc_state] [CRTC:13] [ 5.640358] [drm:check_crtc_state] [CRTC:18] [ 5.640376] [drm:i9xx_get_plane_config] pipe/plane 1/1 with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000 [ 5.640387] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [0, 7ffff000] [ 5.646141] [drm:gen8_ppgtt_init] Allocated 2 pages for page directories (0 wasted) [ 5.646147] [drm:gen8_ppgtt_init] Allocated 1024 pages for page tables (0 wasted) [ 5.646234] [drm:i915_gem_context_init] HW context support initialized [ 5.646260] [drm:init_status_page] render ring hws offset: 0x00013000 [ 5.646440] [drm:intel_init_pipe_control] render ring pipe control offset: 0x00036000 [ 5.646461] [drm:init_status_page] bsd ring hws offset: 0x00037000 [ 5.646613] [drm:init_status_page] blitter ring hws offset: 0x0005a000 [ 5.646760] [drm:init_status_page] video enhancement ring hws offset: 0x0007d000 [ 5.646983] [drm:intel_ring_workarounds_emit] Number of Workarounds emitted: 2 [ 5.647037] [drm:cherryview_setup_pctx] PCBR: 0x7edf8001 [ 5.648361] [drm:cherryview_init_gt_powersave] DDR speed: 1600 MHz [ 5.650395] [drm:cherryview_init_gt_powersave] max GPU freq: 600 MHz (60) [ 5.652398] [drm:cherryview_init_gt_powersave] RPe GPU freq: 400 MHz (40) [ 5.654405] [drm:cherryview_init_gt_powersave] RP1(Guar) GPU freq: 400 MHz (40) [ 5.656357] [drm:cherryview_init_gt_powersave] min GPU freq: 200 MHz (20) [ 5.656364] [drm:vlv_update_cdclk] Current CD clock rate: 400000 kHz [ 5.656477] [drm:intel_backlight_device_register] Connector eDP-1 backlight sysfs interface registered [ 5.656541] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:eDP-1] [ 5.656550] [drm:intel_dp_detect] [CONNECTOR:29:eDP-1] [ 5.662537] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 5.662750] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9 [ 5.662961] [drm] Initialized i915 1.6.0 20141121 for 0000:00:02.0 on minor 0 [ 5.663854] initcall i915_init+0x0/0x88 [i915] returned 0 after 3340422 usecs [ 5.716356] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 5.764363] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 5.776376] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 5.776386] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:eDP-1] probed modes : [ 5.776396] [drm:drm_mode_debug_printmodeline] Modeline 30:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 5.776402] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-1] [ 5.776407] [drm:intel_hdmi_detect] [CONNECTOR:22:HDMI-A-1] [ 5.788588] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 5.788594] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 5.800359] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-1] disconnected [ 5.800365] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1] [ 5.800370] [drm:intel_dp_detect] [CONNECTOR:27:DP-1] [ 5.824360] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1] disconnected [ 5.824367] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] [ 5.824371] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-2] [ 5.836594] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 r(1) [ 5.836600] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel [ 5.848361] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] disconnected [ 5.848367] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:DP-2] [ 5.848372] [drm:intel_dp_detect] [CONNECTOR:37:DP-2] [ 5.872362] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:DP-2] disconnected [ 5.872368] [drm:drm_setup_crtcs] [ 5.872376] [drm:drm_enable_connectors] connector 29 enabled? yes [ 5.872380] [drm:drm_enable_connectors] connector 22 enabled? no [ 5.872384] [drm:drm_enable_connectors] connector 27 enabled? no [ 5.872388] [drm:drm_enable_connectors] connector 35 enabled? no [ 5.872392] [drm:drm_enable_connectors] connector 37 enabled? no [ 5.872397] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 5.872402] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 [ 5.872408] [drm:intel_fb_initial_config] connector eDP-1 on pipe B [CRTC:13]: 1920x1080 [ 5.872412] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 5.872416] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 5.872420] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 5.872424] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping [ 5.872429] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 13 [ 5.872436] [drm:intelfb_create] no BIOS fb, allocating a new one [ 5.879192] [drm:intelfb_create] allocated 1920x1080 fb: 0x000a0000, bo ffff88017572e000 [ 5.879432] fbcon: inteldrmfb (fb0) is primary device [ 5.879612] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 5.879618] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 5.879622] [drm:intel_modeset_stage_output_state] [CONNECTOR:29:eDP-1] to [CRTC:13] [ 5.879627] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 5.879632] [drm:intel_crtc_set_config] [CRTC:13] [FB:39] #connectors=1 (x y) (0 0) [ 5.879635] [drm:intel_set_config_compute_mode_changes] crtc has no fb, will flip [ 5.879637] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set [ 5.879641] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 5.879647] [drm:drm_mode_debug_printmodeline] Modeline 38:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 5.879649] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=1, fb_changed=1 [ 5.879652] [drm:intel_modeset_stage_output_state] [CONNECTOR:29:eDP-1] to [CRTC:13] [ 5.879655] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 5.879660] [drm:connected_sink_compute_bpp] [CONNECTOR:29:eDP-1] checking for sink bpp constrains [ 5.879666] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 5.879679] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 5.879681] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 5.879685] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 5.879688] [drm:intel_dump_pipe_config] [CRTC:13][modeset] config for pipe B [ 5.879690] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 5.879692] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 5.879695] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5.879699] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 5.879702] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 5.879704] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 5.879705] [drm:intel_dump_pipe_config] requested mode: [ 5.879710] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 5.879711] [drm:intel_dump_pipe_config] adjusted mode: [ 5.879716] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 5.879720] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 5.879722] [drm:intel_dump_pipe_config] port clock: 270000 [ 5.879724] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 5.879727] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 5.879729] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 5.879731] [drm:intel_dump_pipe_config] ips: 0 [ 5.879732] [drm:intel_dump_pipe_config] double wide: 0 [ 5.879739] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 5.905361] [drm:intel_edp_backlight_off] [ 6.130422] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 6.166376] [drm:edp_panel_off] Turn eDP port C panel power off [ 6.166381] [drm:wait_panel_off] Wait for panel power off time [ 6.166388] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 6.207701] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000, dig 0x00000000 [ 6.207705] [drm:intel_hpd_irq_handler] digital hpd port C - long [ 6.207708] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 0 [ 6.207749] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port C [ 6.210570] [drm:wait_panel_status] Wait complete [ 6.248377] [drm:intel_dp_link_down] [ 6.323436] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 6.323442] [drm:cherryview_update_wm] Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, C: plane=2, cursor=2, SR: plane=0, cursor=0 [ 6.355384] [drm:intel_display_power_put] disabling always-on [ 6.457385] [drm:edp_panel_vdd_on] Turning eDP port C VDD on [ 6.457388] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 6.740467] [drm:cherryview_enable_rps] GT fifo had a previous error 1080000 [ 6.742406] [drm:cherryview_enable_rps] GPLL enabled? yes [ 6.742410] [drm:cherryview_enable_rps] GPU status: 0x00282810 [ 6.742413] [drm:cherryview_enable_rps] current GPU freq: 400 MHz (40) [ 6.742416] [drm:cherryview_enable_rps] setting GPU freq to 400 MHz (40) [ 6.767595] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000 [ 6.767598] [drm:wait_panel_status] Wait complete [ 6.767608] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 6.767613] [drm:edp_panel_vdd_on] eDP port C panel power wasn't enabled [ 6.801933] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000, dig 0x00000000 [ 6.801937] [drm:intel_hpd_irq_handler] digital hpd port C - long [ 6.801940] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 1 [ 6.801986] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port C [ 6.968726] [drm:edp_panel_on] Turn eDP port C panel power on [ 6.968732] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 6.968740] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008 [ 6.968742] [drm:wait_panel_status] Wait complete [ 6.968749] [drm:wait_panel_on] Wait for panel power on [ 6.968754] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b [ 7.122606] [drm:wait_panel_status] Wait complete [ 7.122613] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off [ 7.122624] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003 [ 7.170469] [drm:edp_panel_vdd_on] Turning eDP port C VDD on [ 7.170476] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 7.306500] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 7.378478] [drm:intel_dp_start_link_train] clock recovery OK [ 7.450482] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful [ 7.474599] [drm:g4x_check_srwm] SR watermark: display plane 107, cursor 2 [ 7.474602] [drm:g4x_check_srwm] SR watermark: display plane 211, cursor 2 [ 7.474607] [drm:cherryview_update_wm] Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=61, cursor=2, C: plane=2, cursor=2, SR: plane=107, cursor=2 [ 7.474612] [drm:intel_set_memory_cxsr] memory self-refresh is enabled [ 7.474621] [drm:intel_edp_backlight_on] [ 7.474623] [drm:intel_panel_enable_backlight] pipe B [ 7.474628] [drm:intel_panel_actually_set_backlight] set backlight PWM = 7812 [ 7.498480] [drm:intel_psr_match_conditions] PSR disable by flag [ 7.498497] [drm:i9xx_update_primary_plane] Writing base 000A0000 00000000 0 0 7680 [ 7.498516] [drm:intel_connector_check_state] [CONNECTOR:29:eDP-1] [ 7.498529] [drm:check_encoder_state] [ENCODER:21:TMDS-21] [ 7.498532] [drm:check_encoder_state] [ENCODER:26:TMDS-26] [ 7.498536] [drm:check_encoder_state] [ENCODER:28:TMDS-28] [ 7.498540] [drm:check_encoder_state] [ENCODER:34:TMDS-34] [ 7.498543] [drm:check_encoder_state] [ENCODER:36:TMDS-36] [ 7.498549] [drm:check_crtc_state] [CRTC:8] [ 7.498553] [drm:check_crtc_state] [CRTC:13] [ 7.506548] [drm:check_crtc_state] [CRTC:18] [ 7.506558] [drm:intel_crtc_set_config] [CRTC:18] [NOFB] [ 7.506564] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:18], mode_changed=0, fb_changed=0 [ 7.506568] [drm:intel_modeset_stage_output_state] [CONNECTOR:29:eDP-1] to [CRTC:13] [ 7.506573] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 7.506591] Console: switching to colour frame buffer device 240x67 [ 7.506612] [drm:intel_crtc_set_config] [CRTC:13] [FB:39] #connectors=1 (x y) (0 0) [ 7.506617] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0 [ 7.506620] [drm:intel_modeset_stage_output_state] [CONNECTOR:29:eDP-1] to [CRTC:13] [ 7.506625] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 7.506629] [drm:connected_sink_compute_bpp] [CONNECTOR:29:eDP-1] checking for sink bpp constrains [ 7.506635] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 7.506648] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 7.506650] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 7.506655] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 7.506658] [drm:intel_dump_pipe_config] [CRTC:13][modeset] config for pipe B [ 7.506660] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 7.506662] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 7.506666] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 7.506670] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 7.506673] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 7.506676] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 7.506677] [drm:intel_dump_pipe_config] requested mode: [ 7.506685] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 7.506687] [drm:intel_dump_pipe_config] adjusted mode: [ 7.506691] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 7.506696] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 7.506697] [drm:intel_dump_pipe_config] port clock: 270000 [ 7.506699] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 7.506702] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 7.506704] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 7.506706] [drm:intel_dump_pipe_config] ips: 0 [ 7.506707] [drm:intel_dump_pipe_config] double wide: 0 [ 7.529791] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 7.529901] i915 0000:00:02.0: registered panic notifier [ 7.541586] dracut: Starting plymouth daemon [ 7.564003] [drm:intel_crtc_set_config] [CRTC:13] [FB:39] #connectors=1 (x y) (0 0) [ 7.564010] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0 [ 7.564016] [drm:intel_modeset_stage_output_state] [CONNECTOR:29:eDP-1] to [CRTC:13] [ 7.564021] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 7.564024] [drm:connected_sink_compute_bpp] [CONNECTOR:29:eDP-1] checking for sink bpp constrains [ 7.564031] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 7.564045] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 7.564048] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 7.564053] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 7.564056] [drm:intel_dump_pipe_config] [CRTC:13][modeset] config for pipe B [ 7.564058] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 7.564060] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 7.564064] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 7.564067] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 7.564070] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 7.564072] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 7.564073] [drm:intel_dump_pipe_config] requested mode: [ 7.564079] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 7.564080] [drm:intel_dump_pipe_config] adjusted mode: [ 7.564085] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 7.564089] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 7.564091] [drm:intel_dump_pipe_config] port clock: 270000 [ 7.564093] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 7.564095] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 7.564098] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 7.564099] [drm:intel_dump_pipe_config] ips: 0 [ 7.564101] [drm:intel_dump_pipe_config] double wide: 0 [ 7.606934] [drm:intel_crtc_set_config] [CRTC:13] [FB:39] #connectors=1 (x y) (0 0) [ 7.606942] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0 [ 7.606947] [drm:intel_modeset_stage_output_state] [CONNECTOR:29:eDP-1] to [CRTC:13] [ 7.606952] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 7.606956] [drm:connected_sink_compute_bpp] [CONNECTOR:29:eDP-1] checking for sink bpp constrains [ 7.606962] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 7.606976] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 7.606978] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 7.606984] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 7.606988] [drm:intel_dump_pipe_config] [CRTC:13][modeset] config for pipe B [ 7.606990] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 7.606992] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 7.606996] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 7.607000] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 7.607004] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 7.607006] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 7.607007] [drm:intel_dump_pipe_config] requested mode: [ 7.607014] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 7.607015] [drm:intel_dump_pipe_config] adjusted mode: [ 7.607020] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 7.607024] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 7.607026] [drm:intel_dump_pipe_config] port clock: 270000 [ 7.607028] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 7.607030] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 7.607035] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 7.607037] [drm:intel_dump_pipe_config] ips: 0 [ 7.607038] [drm:intel_dump_pipe_config] double wide: 0 [ 7.831235] EXT4-fs (sda2): INFO: recovery required on readonly filesystem [ 7.831371] EXT4-fs (sda2): write access will be enabled during recovery [ 7.839287] EXT4-fs (sda2): recovery complete [ 7.839671] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 7.844408] calling acpi_cpufreq_init+0x0/0x1c9 [acpi_cpufreq] @ 2308 [ 7.845789] initcall acpi_cpufreq_init+0x0/0x1c9 [acpi_cpufreq] returned 0 after 1329 usecs [ 7.846014] calling acpi_ac_init+0x0/0x4a [ac] @ 2314 [ 7.846156] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 7.847936] ACPI: AC Adapter [ADP1] (on-line) [ 7.848086] initcall acpi_ac_init+0x0/0x4a [ac] returned 0 after 2006 usecs [ 7.912927] calling acpi_battery_init+0x0/0x13 [battery] @ 2311 [ 7.912942] initcall acpi_battery_init+0x0/0x13 [battery] returned 0 after 2 usecs [ 7.913584] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 7.913783] ACPI: Battery Slot [BAT0] (battery present) [ 7.913977] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 7.914166] ACPI: Battery Slot [BAT1] (battery absent) [ 7.917071] dracut: Checking ext4: /dev/sda2 [ 7.917709] dracut: issuing e2fsck -a /dev/sda2 [ 7.928530] calling init_soundcore+0x0/0x97 [soundcore] @ 2331 [ 7.928572] initcall init_soundcore+0x0/0x97 [soundcore] returned 0 after 28 usecs [ 7.929751] calling alsa_sound_init+0x0/0x86 [snd] @ 2331 [ 7.929798] initcall alsa_sound_init+0x0/0x86 [snd] returned 0 after 28 usecs [ 7.930306] calling alsa_timer_init+0x0/0x163 [snd_timer] @ 2331 [ 7.930570] initcall alsa_timer_init+0x0/0x163 [snd_timer] returned 0 after 243 usecs [ 7.932168] calling alsa_pcm_init+0x0/0x67 [snd_pcm] @ 2331 [ 7.932194] initcall alsa_pcm_init+0x0/0x67 [snd_pcm] returned 0 after 7 usecs [ 7.932696] calling alsa_hwdep_init+0x0/0x5f [snd_hwdep] @ 2331 [ 7.932711] initcall alsa_hwdep_init+0x0/0x5f [snd_hwdep] returned 0 after 5 usecs [ 7.937353] calling azx_driver_init+0x0/0x1a [snd_hda_intel] @ 2331 [ 7.937726] snd_hda_intel 0000:00:1b.0: irq 118 for MSI/MSI-X [ 7.937921] initcall azx_driver_init+0x0/0x1a [snd_hda_intel] returned 0 after 537 usecs [ 7.944937] dracut: /dev/sda2: clean, 708259/13598720 files, 29121512/54366208 blocks [ 7.945587] calling lpc_ich_driver_init+0x0/0x1a [lpc_ich] @ 2310 [ 7.945849] initcall lpc_ich_driver_init+0x0/0x1a [lpc_ich] returned 0 after 241 usecs [ 7.946388] dracut: Remounting /dev/sda2 with -o errors=remount-ro,ro [ 7.948974] calling i2c_i801_init+0x0/0xa4 [i2c_i801] @ 2311 [ 7.949256] ACPI Warning: SystemIO range 0x0000000000001040-0x000000000000105f conflicts with OpRegion 0x0000000000001040-0x000000000000104f (\_SB_.PCI0.SBUS.SMBI) (20140926/utaddress-258) [ 7.949599] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.949848] initcall i2c_i801_init+0x0/0xa4 [i2c_i801] returned 0 after 839 usecs [ 7.952085] calling pcspkr_platform_driver_init+0x0/0x13 [pcspkr] @ 2309 [ 7.952288] calling serio_raw_drv_init+0x0/0x1a [serio_raw] @ 2313 [ 7.952308] input: PC Speaker as /devices/platform/pcspkr/input/input10 [ 7.952348] initcall serio_raw_drv_init+0x0/0x1a [serio_raw] returned 0 after 47 usecs [ 7.953050] initcall pcspkr_platform_driver_init+0x0/0x13 [pcspkr] returned 0 after 929 usecs [ 7.980499] calling patch_realtek_init+0x0/0xc [snd_hda_codec_realtek] @ 2412 [ 7.980516] initcall patch_realtek_init+0x0/0xc [snd_hda_codec_realtek] returned 0 after 0 usecs [ 7.981559] sound hdaudioC0D0: autoconfig: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line [ 7.981714] sound hdaudioC0D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 7.981833] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 7.981942] sound hdaudioC0D0: mono: mono_out=0x0 [ 7.982032] sound hdaudioC0D0: dig-out=0x1e/0x0 [ 7.982118] sound hdaudioC0D0: inputs: [ 7.982194] sound hdaudioC0D0: Internal Mic=0x12 [ 7.982286] sound hdaudioC0D0: Rear Mic=0x19 [ 7.982372] sound hdaudioC0D0: Front Mic=0x18 [ 7.982471] sound hdaudioC0D0: Line=0x1a [ 7.989957] calling patch_hdmi_init+0x0/0xc [snd_hda_codec_hdmi] @ 2426 [ 7.990353] initcall patch_hdmi_init+0x0/0xc [snd_hda_codec_hdmi] returned 0 after 363 usecs [ 7.997183] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 7.998177] calling iTCO_vendor_init_module+0x0/0x19 [iTCO_vendor_support] @ 2309 [ 7.998185] iTCO_vendor_support: vendor-support=0 [ 7.998289] initcall iTCO_vendor_init_module+0x0/0x19 [iTCO_vendor_support] returned 0 after 97 usecs [ 7.998693] calling iTCO_wdt_init_module+0x0/0x2a [iTCO_wdt] @ 2309 [ 7.998698] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 7.998880] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 8.005589] initcall iTCO_wdt_init_module+0x0/0x2a [iTCO_wdt] returned 0 after 6717 usecs [ 8.009014] dracut: Mounted root filesystem /dev/sda2 [ 8.016431] [drm:intel_crtc_set_config] [CRTC:13] [FB:39] #connectors=1 (x y) (0 0) [ 8.016439] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0 [ 8.016456] [drm:intel_modeset_stage_output_state] [CONNECTOR:29:eDP-1] to [CRTC:13] [ 8.016461] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 8.016466] [drm:connected_sink_compute_bpp] [CONNECTOR:29:eDP-1] checking for sink bpp constrains [ 8.016472] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 8.016485] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 8.016487] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 8.016491] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 8.016494] [drm:intel_dump_pipe_config] [CRTC:13][modeset] config for pipe B [ 8.016496] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 8.016498] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 8.016522] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 8.016527] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 8.016530] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 8.016531] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 8.016533] [drm:intel_dump_pipe_config] requested mode: [ 8.016540] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 8.016541] [drm:intel_dump_pipe_config] adjusted mode: [ 8.016546] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 8.016550] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 8.016552] [drm:intel_dump_pipe_config] port clock: 270000 [ 8.016553] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 8.016558] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 8.016560] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 8.016562] [drm:intel_dump_pipe_config] ips: 0 [ 8.016563] [drm:intel_dump_pipe_config] double wide: 0 [ 8.044090] calling dm_init+0x0/0x41 [dm_mod] @ 2455 [ 8.044233] device-mapper: uevent: version 1.0.3 [ 8.044577] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com [ 8.044748] initcall dm_init+0x0/0x41 [dm_mod] returned 0 after 615 usecs [ 8.134903] dracut: Switching root [ 8.207622] random: init urandom read with 55 bits of entropy available [ 8.259124] init: plymouth-upstart-bridge main process (2475) terminated with status 1 [ 8.259391] init: plymouth-upstart-bridge main process ended, respawning [ 8.280943] init: plymouth-upstart-bridge main process (2485) terminated with status 1 [ 8.287258] init: plymouth-upstart-bridge main process ended, respawning [ 8.310685] init: ureadahead main process (2478) terminated with status 5 [ 8.707444] systemd-udevd[2600]: starting version 204 [ 8.936752] [drm:intel_crtc_set_config] [CRTC:13] [FB:39] #connectors=1 (x y) (0 0) [ 8.936760] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0 [ 8.936765] [drm:intel_modeset_stage_output_state] [CONNECTOR:29:eDP-1] to [CRTC:13] [ 8.936770] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 8.936774] [drm:connected_sink_compute_bpp] [CONNECTOR:29:eDP-1] checking for sink bpp constrains [ 8.936780] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 8.936794] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 8.936796] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 8.936800] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 8.936803] [drm:intel_dump_pipe_config] [CRTC:13][modeset] config for pipe B [ 8.936805] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 8.936807] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 8.936811] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 8.936814] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 8.936817] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 8.936819] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 8.936820] [drm:intel_dump_pipe_config] requested mode: [ 8.936826] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 8.936827] [drm:intel_dump_pipe_config] adjusted mode: [ 8.936832] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 8.936836] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 8.936838] [drm:intel_dump_pipe_config] port clock: 270000 [ 8.936840] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 8.936843] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 8.936845] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 8.936846] [drm:intel_dump_pipe_config] ips: 0 [ 8.936848] [drm:intel_dump_pipe_config] double wide: 0 [ 9.090352] [drm:intel_crtc_set_config] [CRTC:13] [FB:39] #connectors=1 (x y) (0 0) [ 9.090360] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0 [ 9.090364] [drm:intel_modeset_stage_output_state] [CONNECTOR:29:eDP-1] to [CRTC:13] [ 9.090369] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 9.090373] [drm:connected_sink_compute_bpp] [CONNECTOR:29:eDP-1] checking for sink bpp constrains [ 9.090380] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 9.090393] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 9.090395] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 9.090400] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 9.090402] [drm:intel_dump_pipe_config] [CRTC:13][modeset] config for pipe B [ 9.090404] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 9.090406] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 9.090410] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 9.090413] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 9.090416] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 9.090418] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 9.090419] [drm:intel_dump_pipe_config] requested mode: [ 9.090425] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 9.090426] [drm:intel_dump_pipe_config] adjusted mode: [ 9.090431] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 9.090435] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 9.090437] [drm:intel_dump_pipe_config] port clock: 270000 [ 9.090439] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 9.090442] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 9.090444] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 9.090445] [drm:intel_dump_pipe_config] ips: 0 [ 9.090447] [drm:intel_dump_pipe_config] double wide: 0 [ 9.159734] asix 1-6.2:1.0 eth12: renamed from eth0 [ 9.170381] systemd-udevd[2842]: renamed network interface eth0 to eth12 [ 9.258460] Adding 16440316k swap on /dev/sda3. Priority:-1 extents:1 across:16440316k SS [ 9.312890] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 10.059893] init: idmapd-mounting (/lib/modules/3.18.0-rc6_zzp_5a54f0_20141201+) main process (3250) killed by TERM signal [ 10.110247] init: bluetooth main process (3463) terminated with status 1 [ 10.110286] init: bluetooth main process ended, respawning [ 10.283811] init: bluetooth main process (3506) terminated with status 1 [ 10.283847] init: bluetooth main process ended, respawning [ 10.365952] init: failsafe main process (3362) killed by TERM signal [ 10.390782] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE [ 10.480599] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off [ 10.480614] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 10.727741] init: bluetooth main process (3655) terminated with status 1 [ 10.727777] init: bluetooth main process ended, respawning [ 10.828306] init: statd-mounting (/lib/modules/3.18.0-rc6_zzp_5a54f0_20141201+) main process (3255) killed by TERM signal [ 10.889768] asix 1-6.2:1.0 eth12: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 10.916224] random: nonblocking pool is initialized [ 11.056620] asix 1-6.2:1.0 eth12: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 11.187165] init: bluetooth main process (3762) terminated with status 1 [ 11.187200] init: bluetooth main process ended, respawning [ 11.748174] init: gdm main process (3862) killed by TERM signal [ 11.752807] init: bluetooth main process (3972) terminated with status 1 [ 11.752848] init: bluetooth main process ended, respawning [ 11.856402] init: bluetooth main process (4023) terminated with status 1 [ 11.856439] init: bluetooth main process ended, respawning [ 11.957901] init: bluetooth main process (4066) terminated with status 1 [ 11.957935] init: bluetooth main process ended, respawning [ 12.057806] init: bluetooth main process (4097) terminated with status 1 [ 12.057845] init: bluetooth main process ended, respawning [ 12.152844] init: bluetooth main process (4127) terminated with status 1 [ 12.152880] init: bluetooth main process ended, respawning [ 12.221106] init: bluetooth main process (4169) terminated with status 1 [ 12.221143] init: bluetooth main process ended, respawning [ 12.282505] init: bluetooth main process (4213) terminated with status 1 [ 12.282547] init: bluetooth respawning too fast, stopped [ 61.332169] [drm:intel_crtc_set_config] [CRTC:13] [FB:39] #connectors=1 (x y) (0 0) [ 61.332176] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0 [ 61.332180] [drm:intel_modeset_stage_output_state] [CONNECTOR:29:eDP-1] to [CRTC:13] [ 61.332185] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 61.332190] [drm:connected_sink_compute_bpp] [CONNECTOR:29:eDP-1] checking for sink bpp constrains [ 61.332196] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 61.332211] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 61.332213] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 61.332218] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 61.332223] [drm:intel_dump_pipe_config] [CRTC:13][modeset] config for pipe B [ 61.332224] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 61.332226] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 61.332230] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 61.332233] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 61.332236] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 61.332238] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 61.332239] [drm:intel_dump_pipe_config] requested mode: [ 61.332246] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 61.332248] [drm:intel_dump_pipe_config] adjusted mode: [ 61.332252] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 61.332257] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 61.332258] [drm:intel_dump_pipe_config] port clock: 270000 [ 61.332260] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 61.332263] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 61.332265] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 61.332267] [drm:intel_dump_pipe_config] ips: 0 [ 61.332268] [drm:intel_dump_pipe_config] double wide: 0 [ 71.253799] usb 1-2: USB disconnect, device number 2 [ 72.773598] usb 1-2: new low-speed USB device number 9 using xhci_hcd [ 72.942292] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a [ 72.942304] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 72.942312] usb 1-2: Product: USB Optical Mouse [ 72.942317] usb 1-2: Manufacturer: Logitech [ 72.942847] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 72.946536] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:046D:C05A.0003/input/input11 [ 72.946868] hid-generic 0003:046D:C05A.0003: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-2/input0 [ 132.970620] usb 1-2: USB disconnect, device number 9 [ 134.490383] usb 1-2: new low-speed USB device number 10 using xhci_hcd [ 134.659366] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a [ 134.659378] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 134.659384] usb 1-2: Product: USB Optical Mouse [ 134.659389] usb 1-2: Manufacturer: Logitech [ 134.659682] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 134.662316] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:046D:C05A.0004/input/input12 [ 134.662705] hid-generic 0003:046D:C05A.0004: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-2/input0 [ 194.695447] usb 1-2: USB disconnect, device number 10 [ 196.215161] usb 1-2: new low-speed USB device number 11 using xhci_hcd [ 196.383670] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a [ 196.383681] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 196.383689] usb 1-2: Product: USB Optical Mouse [ 196.383694] usb 1-2: Manufacturer: Logitech [ 196.384026] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 196.386464] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:046D:C05A.0005/input/input13 [ 196.386870] hid-generic 0003:046D:C05A.0005: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-2/input0 [ 227.673663] PM: Syncing filesystems ... done. [ 227.676717] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 227.678645] PM: Marking nosave pages: [mem 0x00000000-0x00000fff] [ 227.678652] PM: Marking nosave pages: [mem 0x0008f000-0x0008ffff] [ 227.678657] PM: Marking nosave pages: [mem 0x000a0000-0x000fffff] [ 227.678663] PM: Marking nosave pages: [mem 0x20000000-0x201fffff] [ 227.678683] PM: Marking nosave pages: [mem 0x7abd2000-0x7b711fff] [ 227.678778] PM: Marking nosave pages: [mem 0x7b713000-0x7b713fff] [ 227.678782] PM: Marking nosave pages: [mem 0x7b717000-0x7b717fff] [ 227.678785] PM: Marking nosave pages: [mem 0x7c000000-0xffffffff] [ 227.683385] PM: Basic memory bitmaps created [ 227.683551] PM: Preallocating image memory... done (allocated 93633 pages) [ 227.959743] PM: Allocated 374532 kbytes in 0.27 seconds (1387.15 MB/s) [ 227.959749] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 227.961338] Suspending console(s) (use no_console_suspend to debug) [ 227.961391] calling input13+ @ 4530, parent: 0003:046D:C05A.0005 [ 227.961408] call input13+ returned 0 after 13 usecs [ 227.961439] calling input10+ @ 4530, parent: pcspkr [ 227.961441] call input10+ returned 0 after 0 usecs [ 227.961444] calling iTCO_wdt+ @ 4530, parent: 0000:00:1f.0 [ 227.961446] call iTCO_wdt+ returned 0 after 0 usecs [ 227.961456] calling 1-2+ @ 1018, parent: usb1 [ 227.961459] calling input9+ @ 4530, parent: LNXVIDEO:00 [ 227.961467] call 1-2+ returned 0 after 7 usecs [ 227.961483] call input9+ returned 0 after 20 usecs [ 227.961503] calling intel_backlight+ @ 4530, parent: card0-eDP-1 [ 227.961506] call intel_backlight+ returned 0 after 0 usecs [ 227.961512] calling i2c-8+ @ 4530, parent: 0000:00:02.0 [ 227.961514] call i2c-8+ returned 0 after 0 usecs [ 227.961519] calling card0-DP-2+ @ 4530, parent: card0 [ 227.961521] call card0-DP-2+ returned 0 after 0 usecs [ 227.961526] calling card0-HDMI-A-2+ @ 4530, parent: card0 [ 227.961528] call card0-HDMI-A-2+ returned 0 after 0 usecs [ 227.961544] calling input8+ @ 4530, parent: 0003:413C:2107.0002 [ 227.961563] call input8+ returned 0 after 16 usecs [ 227.961592] calling 1-6.5+ @ 6, parent: 1-6 [ 227.961596] call 1-6.5+ returned 0 after 1 usecs [ 227.961612] calling 1-6.2+ @ 6, parent: 1-6 [ 227.961631] calling i2c-7+ @ 4530, parent: 0000:00:02.0 [ 227.961819] calling 1-6.1+ @ 1018, parent: 1-6 [ 227.961874] call i2c-7+ returned 0 after 0 usecs [ 227.961879] calling card0-eDP-1+ @ 4530, parent: card0 [ 227.961881] call card0-eDP-1+ returned 0 after 0 usecs [ 227.961884] calling i2c-6+ @ 4530, parent: 0000:00:02.0 [ 227.961886] call i2c-6+ returned 0 after 0 usecs [ 227.961889] calling card0-DP-1+ @ 4530, parent: card0 [ 227.961891] call card0-DP-1+ returned 0 after 0 usecs [ 227.961893] calling card0-HDMI-A-1+ @ 4530, parent: card0 [ 227.961895] call card0-HDMI-A-1+ returned 0 after 0 usecs [ 227.961899] calling i2c-5+ @ 4530, parent: 0000:00:02.0 [ 227.961901] call i2c-5+ returned 0 after 0 usecs [ 227.961904] calling i2c-4+ @ 4530, parent: 0000:00:02.0 [ 227.961906] call i2c-4+ returned 0 after 0 usecs [ 227.961910] calling i2c-3+ @ 4530, parent: 0000:00:02.0 [ 227.961911] call i2c-3+ returned 0 after 0 usecs [ 227.961915] calling i2c-2+ @ 4530, parent: 0000:00:02.0 [ 227.961918] call 1-6.2+ returned 0 after 294 usecs [ 227.961919] call i2c-2+ returned 0 after 0 usecs [ 227.961925] calling i2c-1+ @ 4530, parent: 0000:00:02.0 [ 227.961927] call i2c-1+ returned 0 after 0 usecs [ 227.961931] calling i2c-0+ @ 4530, parent: 0000:00:02.0 [ 227.961932] call i2c-0+ returned 0 after 0 usecs [ 227.961936] calling card0+ @ 4530, parent: 0000:00:02.0 [ 227.961939] calling 1-5+ @ 6, parent: usb1 [ 227.961940] call card0+ returned 0 after 0 usecs [ 227.961943] call 1-5+ returned 0 after 1 usecs [ 227.961945] calling renderD128+ @ 4530, parent: 0000:00:02.0 [ 227.961947] call renderD128+ returned 0 after 0 usecs [ 227.961950] calling controlD64+ @ 4530, parent: 0000:00:02.0 [ 227.961952] call controlD64+ returned 0 after 0 usecs [ 227.961956] calling input6+ @ 4530, parent: LNXPWRBN:00 [ 227.961974] call input6+ returned 0 after 15 usecs [ 227.961988] calling 1-3+ @ 6, parent: usb1 [ 227.961991] calling input5+ @ 4530, parent: PNP0C0E:00 [ 227.962007] call input5+ returned 0 after 12 usecs [ 227.962010] call 1-3+ returned 0 after 18 usecs [ 227.962020] calling input4+ @ 4530, parent: PNP0C0C:00 [ 227.962036] call input4+ returned 0 after 12 usecs [ 227.962048] calling input3+ @ 4530, parent: PNP0C0D:00 [ 227.962050] call input3+ returned 0 after 0 usecs [ 227.962055] calling input0+ @ 4530, parent: serio0 [ 227.962071] call input0+ returned 0 after 13 usecs [ 227.962103] calling rtc0+ @ 4530, parent: 00:07 [ 227.962105] call rtc0+ returned 0 after 0 usecs [ 227.962112] calling i8042+ @ 4530, parent: platform [ 227.962114] call i8042+ returned 0 after 0 usecs [ 227.962153] calling 1:0:0:0+ @ 24, parent: target1:0:0 [ 227.962162] call 1:0:0:0+ returned 0 after 5 usecs [ 227.962168] calling target1:0:0+ @ 24, parent: host1 [ 227.962170] call target1:0:0+ returned 0 after 0 usecs [ 227.962189] calling usb2+ @ 24, parent: 0000:00:14.0 [ 227.962191] call usb2+ returned 0 after 0 usecs [ 227.962193] calling serial8250+ @ 4530, parent: platform [ 227.962198] call serial8250+ returned 0 after 2 usecs [ 227.962218] calling host1+ @ 6, parent: ata2 [ 227.962221] call host1+ returned 0 after 0 usecs [ 227.962224] calling alarmtimer+ @ 4530, parent: platform [ 227.962227] calling host0+ @ 6, parent: ata1 [ 227.962230] call alarmtimer+ returned 0 after 0 usecs [ 227.962231] call host0+ returned 0 after 0 usecs [ 227.962236] calling efi-framebuffer.0+ @ 4530, parent: platform [ 227.962238] calling ata2+ @ 6, parent: 0000:00:13.0 [ 227.962239] call efi-framebuffer.0+ returned 0 after 0 usecs [ 227.962243] calling pcspkr+ @ 4530, parent: platform [ 227.962245] call pcspkr+ returned 0 after 0 usecs [ 227.962321] calling 00:07+ @ 4530, parent: pnp0 [ 227.962330] call 00:07+ returned 0 after 7 usecs [ 227.962333] calling 00:06+ @ 4530, parent: pnp0 [ 227.962335] call 00:06+ returned 0 after 0 usecs [ 227.962340] calling 00:05+ @ 4530, parent: pnp0 [ 227.962342] call 00:05+ returned 0 after 0 usecs [ 227.962344] calling 00:04+ @ 4530, parent: pnp0 [ 227.962347] call 00:04+ returned 0 after 1 usecs [ 227.962366] calling 00:03+ @ 4530, parent: pnp0 [ 227.962369] call 00:03+ returned 0 after 1 usecs [ 227.962373] calling 00:02+ @ 4530, parent: pnp0 [ 227.962375] call 00:02+ returned 0 after 0 usecs [ 227.962380] calling 00:01+ @ 4530, parent: pnp0 [ 227.962468] serial 00:01: disabled [ 227.962471] call 00:01+ returned 0 after 87 usecs [ 227.962475] calling 00:00+ @ 4530, parent: pnp0 [ 227.962478] call 00:00+ returned 0 after 0 usecs [ 227.962487] calling LNXPWRBN:00+ @ 4530, parent: LNXSYSTM:00 [ 227.962489] call LNXPWRBN:00+ returned 0 after 0 usecs [ 227.962492] calling PNP0C0B:00+ @ 4530, parent: platform [ 227.962496] calling ata1+ @ 4621, parent: 0000:00:13.0 [ 227.962520] call ata1+ returned 0 after 20 usecs [ 227.963411] call ata2+ returned 0 after 1141 usecs [ 227.963898] call 1-6.1+ returned 0 after 2025 usecs [ 227.963987] calling 1-6+ @ 1176, parent: usb1 [ 227.964043] call 1-6+ returned 0 after 50 usecs [ 227.964112] calling usb1+ @ 24, parent: 0000:00:14.0 [ 227.964421] call PNP0C0B:00+ returned 0 after 1875 usecs [ 227.964431] calling MSFT0101:00+ @ 4530, parent: platform [ 227.964433] call MSFT0101:00+ returned 0 after 0 usecs [ 227.964437] calling ACPI000C:00+ @ 4530, parent: platform [ 227.964438] call ACPI000C:00+ returned 0 after 0 usecs [ 227.964443] calling INT33BD:00+ @ 4530, parent: platform [ 227.964444] call INT33BD:00+ returned 0 after 0 usecs [ 227.964448] calling INT33FF:03+ @ 4530, parent: platform [ 227.964450] call INT33FF:03+ returned 0 after 0 usecs [ 227.964454] calling INT33FF:02+ @ 4530, parent: platform [ 227.964456] call INT33FF:02+ returned 0 after 0 usecs [ 227.964458] calling INT33FF:01+ @ 4530, parent: platform [ 227.964461] call INT33FF:01+ returned 0 after 0 usecs [ 227.964465] calling INT33FF:00+ @ 4530, parent: platform [ 227.964467] call INT33FF:00+ returned 0 after 0 usecs [ 227.964472] calling PNP0C0E:00+ @ 4530, parent: platform [ 227.964474] call PNP0C0E:00+ returned 0 after 0 usecs [ 227.964477] calling PNP0C0C:00+ @ 4530, parent: platform [ 227.964478] call PNP0C0C:00+ returned 0 after 0 usecs [ 227.964482] calling PNP0103:00+ @ 4530, parent: platform [ 227.964484] call PNP0103:00+ returned 0 after 0 usecs [ 227.964487] calling PNP0C0D:00+ @ 4530, parent: platform [ 227.964488] call PNP0C0D:00+ returned 0 after 0 usecs [ 227.964491] calling ACPI0003:00+ @ 4530, parent: platform [ 227.964493] call ACPI0003:00+ returned 0 after 0 usecs [ 227.964497] calling INT33BB:01+ @ 4530, parent: pci0000:00 [ 227.964498] call INT33BB:01+ returned 0 after 0 usecs [ 227.964501] calling INT33BB:00+ @ 4530, parent: pci0000:00 [ 227.964503] call INT33BB:00+ returned 0 after 0 usecs [ 227.964508] calling INT0800:00+ @ 4530, parent: 0000:00:1f.0 [ 227.964510] call INT0800:00+ returned 0 after 0 usecs [ 227.964513] calling INT33D2:00+ @ 4530, parent: PNP0C09:00 [ 227.964515] call INT33D2:00+ returned 0 after 0 usecs [ 227.964519] calling PNP0C0A:01+ @ 4530, parent: PNP0C09:00 [ 227.964521] call PNP0C0A:01+ returned 0 after 0 usecs [ 227.964525] calling PNP0C0A:00+ @ 4530, parent: PNP0C09:00 [ 227.964528] call PNP0C0A:00+ returned 0 after 0 usecs [ 227.964531] calling PNP0C09:00+ @ 4530, parent: 0000:00:1f.0 [ 227.964532] call PNP0C09:00+ returned 0 after 0 usecs [ 227.964559] calling LNXTHERM:00+ @ 4530, parent: LNXSYBUS:01 [ 227.964564] call LNXTHERM:00+ returned 0 after 3 usecs [ 227.964589] calling PNP0C0E:00+ @ 4530, parent: LNXSYBUS:00 [ 227.964591] call PNP0C0E:00+ returned 0 after 0 usecs [ 227.964596] calling PNP0C0C:00+ @ 4530, parent: LNXSYBUS:00 [ 227.964597] call PNP0C0C:00+ returned 0 after 0 usecs [ 227.964606] calling PNP0C0D:00+ @ 4530, parent: LNXSYBUS:00 [ 227.964610] calling 0000:02:00.0+ @ 1176, parent: 0000:00:1c.1 [ 227.964612] call PNP0C0D:00+ returned 0 after 0 usecs [ 227.964615] call 0000:02:00.0+ returned 0 after 1 usecs [ 227.964622] calling 0000:00:1f.3+ @ 1176, parent: pci0000:00 [ 227.964630] call 0000:00:1f.3+ returned 0 after 5 usecs [ 227.964637] calling 0000:00:1f.0+ @ 1176, parent: pci0000:00 [ 227.964639] call 0000:00:1f.0+ returned 0 after 0 usecs [ 227.964644] calling 0000:00:1c.1+ @ 1176, parent: pci0000:00 [ 227.964647] call 0000:00:1c.1+ returned 0 after 1 usecs [ 227.964652] calling 0000:00:1c.0+ @ 1176, parent: pci0000:00 [ 227.964654] call 0000:00:1c.0+ returned 0 after 0 usecs [ 227.964660] calling 0000:00:1b.0+ @ 1176, parent: pci0000:00 [ 227.964669] calling 0000:00:1a.0+ @ 1018, parent: pci0000:00 [ 227.964672] call 0000:00:1a.0+ returned 0 after 0 usecs [ 227.964685] calling 0000:00:13.0+ @ 1018, parent: pci0000:00 [ 227.964733] call usb1+ returned 0 after 534 usecs [ 227.964745] calling 0000:00:0b.0+ @ 24, parent: pci0000:00 [ 227.964747] call 0000:00:13.0+ returned 0 after 57 usecs [ 227.964749] call 0000:00:0b.0+ returned 0 after 0 usecs [ 227.964754] calling 0000:00:03.0+ @ 1018, parent: pci0000:00 [ 227.964756] call 0000:00:03.0+ returned 0 after 0 usecs [ 227.964762] calling 0000:00:02.0+ @ 24, parent: pci0000:00 [ 227.964764] calling 0000:00:00.0+ @ 1018, parent: pci0000:00 [ 227.964766] call 0000:00:00.0+ returned 0 after 0 usecs [ 227.964769] [drm:intel_display_power_get] enabling always-on [ 227.964786] calling 0000:00:14.0+ @ 6, parent: pci0000:00 [ 227.964789] call 0000:00:14.0+ returned 0 after 1 usecs [ 227.988429] call 0000:00:1b.0+ returned 0 after 23206 usecs [ 228.078913] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 228.111423] [drm:edp_panel_vdd_on] Turning eDP port C VDD on [ 228.111433] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 228.123522] [drm:intel_edp_backlight_off] [ 228.348448] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 228.384455] [drm:edp_panel_off] Turn eDP port C panel power off [ 228.384462] [drm:wait_panel_off] Wait for panel power off time [ 228.384470] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 228.426060] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000, dig 0x00000000 [ 228.426064] [drm:intel_hpd_irq_handler] digital hpd port C - long [ 228.426068] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 0 [ 228.426111] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port C [ 228.428706] [drm:wait_panel_status] Wait complete [ 228.456440] [drm:intel_dp_link_down] [ 228.531451] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 228.531457] [drm:cherryview_update_wm] Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, C: plane=2, cursor=2, SR: plane=0, cursor=0 [ 228.578398] [drm:intel_display_power_put] disabling dpio-common-d [ 228.590530] [drm:intel_display_power_put] disabling dpio-common-bc [ 228.602442] [drm:intel_display_power_put] disabling pipe-a [ 228.614443] [drm:intel_display_power_put] disabling always-on [ 228.614450] call 0000:00:02.0+ returned 0 after 634429 usecs [ 228.614669] PM: freeze of devices complete after 653.290 msecs [ 228.615340] calling 0000:00:02.0+ @ 1176, parent: pci0000:00 [ 228.627591] call 0000:00:02.0+ returned 0 after 11954 usecs [ 228.627843] PM: late freeze of devices complete after 13.163 msecs [ 228.628719] calling 0000:02:00.0+ @ 6, parent: 0000:00:1c.1 [ 228.631242] call 0000:02:00.0+ returned 0 after 2459 usecs [ 228.631256] calling 0000:00:1f.3+ @ 6, parent: pci0000:00 [ 228.631284] calling 0000:00:1f.0+ @ 1176, parent: pci0000:00 [ 228.631368] call 0000:00:1f.3+ returned 0 after 106 usecs [ 228.631377] calling 0000:00:1c.1+ @ 6, parent: pci0000:00 [ 228.631393] call 0000:00:1f.0+ returned 0 after 102 usecs [ 228.631401] calling 0000:00:1c.0+ @ 1176, parent: pci0000:00 [ 228.632425] calling 0000:00:1b.0+ @ 24, parent: pci0000:00 [ 228.632429] call 0000:00:1b.0+ returned 0 after 1 usecs [ 228.632435] calling 0000:00:1a.0+ @ 4622, parent: pci0000:00 [ 228.632441] calling 0000:00:14.0+ @ 24, parent: pci0000:00 [ 228.632954] call 0000:00:1c.0+ returned 0 after 1512 usecs [ 228.632961] calling 0000:00:13.0+ @ 1176, parent: pci0000:00 [ 228.632966] call 0000:00:13.0+ returned 0 after 2 usecs [ 228.632969] calling 0000:00:0b.0+ @ 1176, parent: pci0000:00 [ 228.633033] call 0000:00:1c.1+ returned 0 after 1613 usecs [ 228.633040] calling 0000:00:03.0+ @ 6, parent: pci0000:00 [ 228.633104] call 0000:00:14.0+ returned 0 after 645 usecs [ 228.633106] call 0000:00:1a.0+ returned 0 after 650 usecs [ 228.633113] calling 0000:00:00.0+ @ 4622, parent: pci0000:00 [ 228.633118] calling 0000:00:02.0+ @ 24, parent: pci0000:00 [ 228.633121] call 0000:00:02.0+ returned 0 after 0 usecs [ 228.633150] call 0000:00:0b.0+ returned 0 after 174 usecs [ 228.633160] call 0000:00:03.0+ returned 0 after 114 usecs [ 228.633169] call 0000:00:00.0+ returned 0 after 51 usecs [ 228.633195] PM: noirq freeze of devices complete after 5.345 msecs [ 228.633237] ACPI: Preparing to enter system sleep state S4 [ 228.633672] PM: Saving platform NVS memory [ 228.636246] Disabling non-boot CPUs ... [ 228.637684] smpboot: CPU 1 is now offline [ 228.639548] smpboot: CPU 2 is now offline [ 228.641474] smpboot: CPU 3 is now offline [ 228.641945] PM: Calling mce_syscore_suspend+0x0/0x2 [ 228.641954] PM: Calling acpi_processor_suspend+0x0/0x16 [ 228.641969] PM: Calling timekeeping_suspend+0x0/0x155 [ 228.642020] PM: Calling save_ioapic_entries+0x0/0x5c [ 228.642648] PM: Calling i8259A_suspend+0x0/0x1e [ 228.642659] PM: Calling fw_suspend+0x0/0xd [ 228.642663] PM: Calling lapic_suspend+0x0/0x168 [ 228.642670] PM: Creating hibernation image: [ 228.853800] PM: Need to copy 92587 pages [ 228.853803] PM: Normal pages needed: 92587 + 1024, available pages: 936000 [ 228.642921] PM: Restoring platform NVS memory [ 228.643519] PM: Calling lapic_resume+0x0/0x20b [ 228.643560] PM: Calling irqrouter_resume+0x0/0x35 [ 228.643565] PM: Calling i8259A_resume+0x0/0x25 [ 228.643721] PM: Calling i8237A_resume+0x0/0x80 [ 228.643882] PM: Calling ioapic_resume+0x0/0x71 [ 228.644096] PM: Calling irq_pm_syscore_resume+0x0/0xa [ 228.644130] PM: Calling timekeeping_resume+0x0/0x167 [ 228.644212] PM: Calling acpi_processor_resume+0x0/0x36 [ 228.644224] PM: Calling mce_syscore_resume+0x0/0x1c [ 228.644237] CPU0: Thermal LVT vector (0xfa) already installed [ 228.644260] Enabling non-boot CPUs ... [ 228.644331] x86: Booting SMP configuration: [ 228.644335] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 228.660868] CPU1: Thermal LVT vector (0xfa) already installed [ 228.664007] CPU1 is up [ 228.664132] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 228.680664] CPU2: Thermal LVT vector (0xfa) already installed [ 228.683847] CPU2 is up [ 228.683904] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 228.700436] CPU3: Thermal LVT vector (0xfa) already installed [ 228.703807] CPU3 is up [ 228.705115] ACPI: Waking up from system sleep state S4 [ 228.917560] acpi LNXPOWER:02: Turning OFF [ 228.917965] acpi LNXPOWER:01: Turning OFF [ 228.918043] calling 0000:00:00.0+ @ 24, parent: pci0000:00 [ 228.918070] call 0000:00:00.0+ returned 0 after 23 usecs [ 228.918075] calling 0000:00:02.0+ @ 24, parent: pci0000:00 [ 228.918097] calling 0000:00:03.0+ @ 4621, parent: pci0000:00 [ 228.918132] call 0000:00:03.0+ returned 0 after 31 usecs [ 228.918138] calling 0000:00:0b.0+ @ 4621, parent: pci0000:00 [ 228.918161] call 0000:00:0b.0+ returned 0 after 21 usecs [ 228.918165] calling 0000:00:13.0+ @ 4621, parent: pci0000:00 [ 228.918184] calling 0000:00:14.0+ @ 4622, parent: pci0000:00 [ 228.918200] calling 0000:00:1a.0+ @ 6, parent: pci0000:00 [ 228.918208] calling 0000:00:1b.0+ @ 1176, parent: pci0000:00 [ 228.918328] call 0000:00:13.0+ returned 0 after 156 usecs [ 228.918332] calling 0000:00:1c.0+ @ 4621, parent: pci0000:00 [ 228.918371] call 0000:00:1a.0+ returned 0 after 162 usecs [ 228.918377] calling 0000:00:1c.1+ @ 6, parent: pci0000:00 [ 228.918609] calling 0000:00:1f.0+ @ 1018, parent: pci0000:00 [ 228.918627] call 0000:00:14.0+ returned 0 after 428 usecs [ 228.918634] calling 0000:00:1f.3+ @ 4622, parent: pci0000:00 [ 228.919584] call 0000:00:1f.0+ returned 0 after 948 usecs [ 228.919786] call 0000:00:1f.3+ returned 0 after 1121 usecs [ 228.920148] call 0000:00:1c.0+ returned 0 after 1770 usecs [ 228.920253] call 0000:00:1c.1+ returned 0 after 1828 usecs [ 228.920341] calling 0000:02:00.0+ @ 1018, parent: 0000:00:1c.1 [ 228.923224] call 0000:02:00.0+ returned 0 after 2810 usecs [ 228.928696] call 0000:00:02.0+ returned 0 after 10367 usecs [ 228.928762] call 0000:00:1b.0+ returned 0 after 10300 usecs [ 228.928799] PM: noirq restore of devices complete after 10.800 msecs [ 228.928960] calling 0000:00:02.0+ @ 24, parent: pci0000:00 [ 228.929076] calling PNP0C0B:00+ @ 4530, parent: platform [ 228.929082] call PNP0C0B:00+ returned 0 after 3 usecs [ 228.931484] [drm:intel_display_power_get] enabling always-on [ 228.931486] [drm:intel_display_power_get] enabling pipe-a [ 228.942631] [drm:intel_display_power_get] enabling dpio-common-bc [ 228.954632] [drm:intel_display_power_get] enabling dpio-common-d [ 228.984585] call 0000:00:02.0+ returned 0 after 54313 usecs [ 228.984804] PM: early restore of devices complete after 55.947 msecs [ 229.052735] calling 0000:00:00.0+ @ 24, parent: pci0000:00 [ 229.052739] call 0000:00:00.0+ returned 0 after 2 usecs [ 229.052744] calling 0000:00:02.0+ @ 24, parent: pci0000:00 [ 229.052758] calling 0000:00:03.0+ @ 4624, parent: pci0000:00 [ 229.052764] call 0000:00:03.0+ returned 0 after 2 usecs [ 229.052771] calling 0000:00:0b.0+ @ 4624, parent: pci0000:00 [ 229.052774] call 0000:00:0b.0+ returned 0 after 0 usecs [ 229.052779] calling 0000:00:13.0+ @ 4624, parent: pci0000:00 [ 229.052798] call 0000:00:13.0+ returned 0 after 16 usecs [ 229.052803] calling 0000:00:14.0+ @ 4624, parent: pci0000:00 [ 229.052828] calling 0000:00:1a.0+ @ 1018, parent: pci0000:00 [ 229.052834] usb usb1: root hub lost power or was reset [ 229.052836] call 0000:00:1a.0+ returned 0 after 1 usecs [ 229.052839] usb usb2: root hub lost power or was reset [ 229.052844] calling 0000:00:1b.0+ @ 1018, parent: pci0000:00 [ 229.052905] calling PNP0C0A:00+ @ 4530, parent: PNP0C09:00 [ 229.052960] calling 0000:00:1c.0+ @ 6, parent: pci0000:00 [ 229.052966] call 0000:00:1c.0+ returned 0 after 3 usecs [ 229.052972] calling 0000:00:1c.1+ @ 1176, parent: pci0000:00 [ 229.052974] calling 0000:00:1f.0+ @ 6, parent: pci0000:00 [ 229.052978] call 0000:00:1c.1+ returned 0 after 3 usecs [ 229.052980] call 0000:00:1f.0+ returned 0 after 1 usecs [ 229.052986] calling 0000:00:1f.3+ @ 1176, parent: pci0000:00 [ 229.052988] calling 0000:02:00.0+ @ 6, parent: 0000:00:1c.1 [ 229.052991] call 0000:02:00.0+ returned 0 after 0 usecs [ 229.052996] calling ata1+ @ 6, parent: 0000:00:13.0 [ 229.053010] call ata1+ returned 0 after 11 usecs [ 229.053014] calling ata2+ @ 6, parent: 0000:00:13.0 [ 229.053023] call ata2+ returned 0 after 6 usecs [ 229.053026] calling host0+ @ 6, parent: ata1 [ 229.053029] call host0+ returned 0 after 1 usecs [ 229.053032] calling host1+ @ 6, parent: ata2 [ 229.053040] call host1+ returned 0 after 0 usecs [ 229.053143] snd_hda_intel 0000:00:1b.0: irq 116 for MSI/MSI-X [ 229.053245] xhci_hcd 0000:00:14.0: irq 118 for MSI/MSI-X [ 229.053265] call PNP0C0A:00+ returned 0 after 347 usecs [ 229.053269] calling PNP0C0A:01+ @ 4530, parent: PNP0C09:00 [ 229.053297] call 0000:00:1f.3+ returned 0 after 299 usecs [ 229.053321] call PNP0C0A:01+ returned 0 after 46 usecs [ 229.053334] call 0000:00:14.0+ returned 0 after 515 usecs [ 229.053349] calling usb1+ @ 6, parent: 0000:00:14.0 [ 229.053445] calling ACPI0003:00+ @ 4530, parent: LNXSYBUS:00 [ 229.053477] call ACPI0003:00+ returned 0 after 27 usecs [ 229.053480] calling PNP0C0D:00+ @ 4530, parent: LNXSYBUS:00 [ 229.053713] call PNP0C0D:00+ returned 0 after 223 usecs [ 229.053720] calling PNP0C0C:00+ @ 4530, parent: LNXSYBUS:00 [ 229.053722] call PNP0C0C:00+ returned 0 after 0 usecs [ 229.053724] calling PNP0C0E:00+ @ 4530, parent: LNXSYBUS:00 [ 229.053726] call PNP0C0E:00+ returned 0 after 0 usecs [ 229.053739] calling LNXTHERM:00+ @ 4530, parent: LNXSYBUS:01 [ 229.053817] call LNXTHERM:00+ returned 0 after 73 usecs [ 229.053990] calling PNP0C09:00+ @ 4530, parent: 0000:00:1f.0 [ 229.053992] call PNP0C09:00+ returned 0 after 0 usecs [ 229.053995] calling PNP0C0A:00+ @ 4530, parent: PNP0C09:00 [ 229.053996] call PNP0C0A:00+ returned 0 after 0 usecs [ 229.053999] calling PNP0C0A:01+ @ 4530, parent: PNP0C09:00 [ 229.054000] call PNP0C0A:01+ returned 0 after 0 usecs [ 229.054002] calling INT33D2:00+ @ 4530, parent: PNP0C09:00 [ 229.054004] call INT33D2:00+ returned 0 after 0 usecs [ 229.054006] calling INT0800:00+ @ 4530, parent: 0000:00:1f.0 [ 229.054008] call INT0800:00+ returned 0 after 0 usecs [ 229.054011] calling INT33BB:00+ @ 4530, parent: pci0000:00 [ 229.054013] call INT33BB:00+ returned 0 after 0 usecs [ 229.054015] calling INT33BB:01+ @ 4530, parent: pci0000:00 [ 229.054017] call INT33BB:01+ returned 0 after 0 usecs [ 229.054020] calling ACPI0003:00+ @ 4530, parent: platform [ 229.054021] call ACPI0003:00+ returned 0 after 0 usecs [ 229.054023] calling PNP0C0D:00+ @ 4530, parent: platform [ 229.054025] call PNP0C0D:00+ returned 0 after 0 usecs [ 229.054027] calling PNP0103:00+ @ 4530, parent: platform [ 229.054029] call PNP0103:00+ returned 0 after 0 usecs [ 229.054031] calling PNP0C0C:00+ @ 4530, parent: platform [ 229.054033] call PNP0C0C:00+ returned 0 after 0 usecs [ 229.054035] calling PNP0C0E:00+ @ 4530, parent: platform [ 229.054036] call PNP0C0E:00+ returned 0 after 0 usecs [ 229.054038] calling INT33FF:00+ @ 4530, parent: platform [ 229.054040] call INT33FF:00+ returned 0 after 0 usecs [ 229.054042] calling INT33FF:01+ @ 4530, parent: platform [ 229.054044] call INT33FF:01+ returned 0 after 0 usecs [ 229.054046] calling INT33FF:02+ @ 4530, parent: platform [ 229.054048] call INT33FF:02+ returned 0 after 0 usecs [ 229.054050] calling INT33FF:03+ @ 4530, parent: platform [ 229.054052] call INT33FF:03+ returned 0 after 0 usecs [ 229.054054] calling INT33BD:00+ @ 4530, parent: platform [ 229.054055] call INT33BD:00+ returned 0 after 0 usecs [ 229.054058] calling ACPI000C:00+ @ 4530, parent: platform [ 229.054059] call ACPI000C:00+ returned 0 after 0 usecs [ 229.054061] calling MSFT0101:00+ @ 4530, parent: platform [ 229.054063] call MSFT0101:00+ returned 0 after 0 usecs [ 229.054066] calling PNP0C0B:00+ @ 4530, parent: platform [ 229.054128] call PNP0C0B:00+ returned 0 after 57 usecs [ 229.054132] calling LNXPWRBN:00+ @ 4530, parent: LNXSYSTM:00 [ 229.054134] call LNXPWRBN:00+ returned 0 after 0 usecs [ 229.054139] calling 00:00+ @ 4530, parent: pnp0 [ 229.054141] call 00:00+ returned 0 after 0 usecs [ 229.054143] calling 00:01+ @ 4530, parent: pnp0 [ 229.054149] call 00:01+ returned 0 after 4 usecs [ 229.054152] calling 00:02+ @ 4530, parent: pnp0 [ 229.054154] call 00:02+ returned 0 after 0 usecs [ 229.054156] calling 00:03+ @ 4530, parent: pnp0 [ 229.054157] call 00:03+ returned 0 after 0 usecs [ 229.054159] calling 00:04+ @ 4530, parent: pnp0 [ 229.054161] call 00:04+ returned 0 after 0 usecs [ 229.054163] calling 00:05+ @ 4530, parent: pnp0 [ 229.054165] call 00:05+ returned 0 after 0 usecs [ 229.054167] calling 00:06+ @ 4530, parent: pnp0 [ 229.054169] call 00:06+ returned 0 after 0 usecs [ 229.054171] calling 00:07+ @ 4530, parent: pnp0 [ 229.054195] rtc_cmos 00:07: System wakeup disabled by ACPI [ 229.054197] call 00:07+ returned 0 after 23 usecs [ 229.054237] calling pcspkr+ @ 4530, parent: platform [ 229.054240] call pcspkr+ returned 0 after 0 usecs [ 229.054242] calling efi-framebuffer.0+ @ 4530, parent: platform [ 229.054244] call efi-framebuffer.0+ returned 0 after 0 usecs [ 229.054248] calling alarmtimer+ @ 4530, parent: platform [ 229.054250] call alarmtimer+ returned 0 after 0 usecs [ 229.054264] calling serial8250+ @ 4530, parent: platform [ 229.054267] call serial8250+ returned 0 after 1 usecs [ 229.054304] calling i8042+ @ 4530, parent: platform [ 229.054675] call i8042+ returned 0 after 360 usecs [ 229.054679] calling serio0+ @ 4530, parent: i8042 [ 229.054687] call serio0+ returned 0 after 5 usecs [ 229.054713] calling serio1+ @ 4530, parent: i8042 [ 229.054720] call serio1+ returned 0 after 4 usecs [ 229.054728] calling rtc0+ @ 4530, parent: 00:07 [ 229.054731] call rtc0+ returned 0 after 0 usecs [ 229.054838] calling usb2+ @ 4630, parent: 0000:00:14.0 [ 229.056348] calling target1:0:0+ @ 4640, parent: host1 [ 229.056353] call target1:0:0+ returned 0 after 2 usecs [ 229.056359] calling 1:0:0:0+ @ 4640, parent: target1:0:0 [ 229.056364] call 1:0:0:0+ returned 0 after 3 usecs [ 229.056383] calling input0+ @ 4530, parent: serio0 [ 229.056392] call input0+ returned 0 after 6 usecs [ 229.056396] calling input3+ @ 4530, parent: PNP0C0D:00 [ 229.056398] call input3+ returned 0 after 0 usecs [ 229.056401] calling input4+ @ 4530, parent: PNP0C0C:00 [ 229.056403] call input4+ returned 0 after 0 usecs [ 229.056407] calling input5+ @ 4530, parent: PNP0C0E:00 [ 229.056409] call input5+ returned 0 after 0 usecs [ 229.056412] calling input6+ @ 4530, parent: LNXPWRBN:00 [ 229.056414] call input6+ returned 0 after 0 usecs [ 229.056564] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it [ 229.056918] [drm:intel_opregion_setup] graphic opregion physical addr: 0x7b65d018 [ 229.056944] [drm:intel_opregion_setup] Public ACPI methods supported [ 229.056945] [drm:intel_opregion_setup] ASLE supported [ 229.060732] [drm:vlv_initial_power_sequencer_setup] no initial power sequencer for port C [ 229.062438] sd 1:0:0:0: [sda] Starting disk [ 229.068940] [drm:vlv_update_cdclk] Current CD clock rate: 400000 kHz [ 229.069030] [drm:intel_modeset_readout_hw_state] [CRTC:8] hw state readout: disabled [ 229.069035] [drm:intel_modeset_readout_hw_state] [CRTC:13] hw state readout: disabled [ 229.069040] [drm:intel_modeset_readout_hw_state] [CRTC:18] hw state readout: disabled [ 229.069046] [drm:intel_modeset_readout_hw_state] [ENCODER:21:TMDS-21] hw state readout: disabled, pipe A [ 229.069054] [drm:intel_modeset_readout_hw_state] [ENCODER:26:TMDS-26] hw state readout: disabled, pipe A [ 229.069063] [drm:intel_modeset_readout_hw_state] [ENCODER:28:TMDS-28] hw state readout: disabled, pipe A [ 229.069069] [drm:intel_modeset_readout_hw_state] [ENCODER:34:TMDS-34] hw state readout: disabled, pipe A [ 229.069073] [drm:intel_modeset_readout_hw_state] [ENCODER:36:TMDS-36] hw state readout: disabled, pipe A [ 229.069078] [drm:intel_modeset_readout_hw_state] [CONNECTOR:29:eDP-1] hw state readout: disabled [ 229.069084] [drm:intel_modeset_readout_hw_state] [CONNECTOR:22:HDMI-A-1] hw state readout: disabled [ 229.069088] [drm:intel_modeset_readout_hw_state] [CONNECTOR:27:DP-1] hw state readout: disabled [ 229.069094] [drm:intel_modeset_readout_hw_state] [CONNECTOR:35:HDMI-A-2] hw state readout: disabled [ 229.069099] [drm:intel_modeset_readout_hw_state] [CONNECTOR:37:DP-2] hw state readout: disabled [ 229.069107] [drm:i915_get_vblank_timestamp] crtc 0 is disabled [ 229.069111] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe A [ 229.069113] [drm:i915_get_vblank_timestamp] crtc 0 is disabled [ 229.069115] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe A [ 229.069120] [drm:intel_dump_pipe_config] [CRTC:8][setup_hw_state] config for pipe A [ 229.069123] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 229.069125] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 229.069130] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 229.069133] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 229.069136] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 229.069138] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 229.069139] [drm:intel_dump_pipe_config] requested mode: [ 229.069145] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 229.069147] [drm:intel_dump_pipe_config] adjusted mode: [ 229.069151] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 229.069155] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 229.069157] [drm:intel_dump_pipe_config] port clock: 0 [ 229.069158] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 229.069161] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 229.069164] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 229.069165] [drm:intel_dump_pipe_config] ips: 0 [ 229.069167] [drm:intel_dump_pipe_config] double wide: 0 [ 229.069172] [drm:i915_get_vblank_timestamp] crtc 1 is disabled [ 229.069177] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B [ 229.069179] [drm:i915_get_vblank_timestamp] crtc 1 is disabled [ 229.069181] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B [ 229.069184] [drm:intel_dump_pipe_config] [CRTC:13][setup_hw_state] config for pipe B [ 229.069186] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 229.069188] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 229.069191] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 229.069194] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 229.069197] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 229.069199] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 229.069200] [drm:intel_dump_pipe_config] requested mode: [ 229.069205] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 229.069206] [drm:intel_dump_pipe_config] adjusted mode: [ 229.069210] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 229.069214] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 229.069216] [drm:intel_dump_pipe_config] port clock: 0 [ 229.069218] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 229.069220] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 229.069224] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 229.069226] [drm:intel_dump_pipe_config] ips: 0 [ 229.069227] [drm:intel_dump_pipe_config] double wide: 0 [ 229.069230] [drm:i915_get_vblank_timestamp] crtc 2 is disabled [ 229.069235] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C [ 229.069237] [drm:i915_get_vblank_timestamp] crtc 2 is disabled [ 229.069239] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C [ 229.069242] [drm:intel_dump_pipe_config] [CRTC:18][setup_hw_state] config for pipe C [ 229.069243] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 229.069245] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 229.069249] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 229.069252] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 229.069255] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 229.069257] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 229.069258] [drm:intel_dump_pipe_config] requested mode: [ 229.069262] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 229.069264] [drm:intel_dump_pipe_config] adjusted mode: [ 229.069268] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 229.069272] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 229.069274] [drm:intel_dump_pipe_config] port clock: 0 [ 229.069276] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 229.069278] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 229.069281] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 229.069282] [drm:intel_dump_pipe_config] ips: 0 [ 229.069284] [drm:intel_dump_pipe_config] double wide: 0 [ 229.069292] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 229.088611] [drm:intel_display_power_put] disabling always-on [ 229.088625] [drm:check_encoder_state] [ENCODER:21:TMDS-21] [ 229.088629] [drm:check_encoder_state] [ENCODER:26:TMDS-26] [ 229.088632] [drm:check_encoder_state] [ENCODER:28:TMDS-28] [ 229.088640] [drm:check_encoder_state] [ENCODER:34:TMDS-34] [ 229.088645] [drm:check_encoder_state] [ENCODER:36:TMDS-36] [ 229.088653] [drm:check_crtc_state] [CRTC:8] [ 229.088662] [drm:check_crtc_state] [CRTC:13] [ 229.088667] [drm:check_crtc_state] [CRTC:18] [ 229.088673] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 229.088679] [drm:connected_sink_compute_bpp] [CONNECTOR:29:eDP-1] checking for sink bpp constrains [ 229.088685] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 229.088699] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 229.088701] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 229.088706] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 229.088709] [drm:intel_dump_pipe_config] [CRTC:13][modeset] config for pipe B [ 229.088710] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 229.088712] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 229.088716] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 229.088721] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 229.088725] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 229.088727] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 229.088728] [drm:intel_dump_pipe_config] requested mode: [ 229.088734] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 229.088735] [drm:intel_dump_pipe_config] adjusted mode: [ 229.088741] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 229.088745] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 229.088747] [drm:intel_dump_pipe_config] port clock: 270000 [ 229.088749] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 229.088752] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 229.088754] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 229.088756] [drm:intel_dump_pipe_config] ips: 0 [ 229.088758] [drm:intel_dump_pipe_config] double wide: 0 [ 229.155814] call usb2+ returned 0 after 98599 usecs [ 229.170600] [drm:vlv_init_panel_power_sequencer] initializing pipe B power sequencer for port C [ 229.170614] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06 [ 229.180602] [drm:edp_panel_vdd_on] Turning eDP port C VDD on [ 229.180610] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 229.180623] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control 00000000 [ 229.265612] call usb1+ returned 0 after 207273 usecs [ 229.265641] calling 1-6+ @ 4678, parent: usb1 [ 229.265656] calling 1-3+ @ 4640, parent: usb1 [ 229.265659] calling 1-2+ @ 4700, parent: usb1 [ 229.265663] calling 1-5+ @ 4669, parent: usb1 [ 229.276603] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [ 229.359750] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 229.360558] ata2.00: configured for UDMA/133 [ 229.418883] usb 1-6: reset high-speed USB device number 5 using xhci_hcd [ 229.531721] atkbd serio0: Failed to enable keyboard on isa0060/serio0 [ 229.576780] [drm:wait_panel_status] Wait complete [ 229.576805] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 229.576809] [drm:edp_panel_vdd_on] eDP port C panel power wasn't enabled [ 229.583219] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007b9568a0 [ 229.612155] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00100000, dig 0x00000000 [ 229.612159] [drm:intel_hpd_irq_handler] digital hpd port C - long [ 229.612161] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 5 - cnt: 0 [ 229.612218] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port C [ 229.736180] usb 1-3: reset high-speed USB device number 3 using xhci_hcd [ 229.777790] [drm:edp_panel_on] Turn eDP port C panel power on [ 229.777794] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 229.777807] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008 [ 229.777810] [drm:wait_panel_status] Wait complete [ 229.777817] [drm:wait_panel_on] Wait for panel power on [ 229.777821] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b [ 229.787749] call 1-6+ returned 0 after 509844 usecs [ 229.787819] calling 1-6.5+ @ 4697, parent: 1-6 [ 229.787823] calling 1-6.2+ @ 4691, parent: 1-6 [ 229.787846] calling 1-6.1+ @ 4687, parent: 1-6 [ 229.907392] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017a4a5890 [ 229.907397] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017a4a5848 [ 229.907401] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880175af7d08 [ 229.907405] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017a4a5800 [ 229.907412] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017a4a5d90 [ 229.907415] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880175af7cc0 [ 229.907419] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017a4a5b90 [ 229.907423] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017a4a5d48 [ 229.907428] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017a4a5090 [ 229.907432] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017a4a5d00 [ 229.907436] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017a4a5790 [ 229.907441] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017a4a5b00 [ 229.907445] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017a4a5b48 [ 229.907450] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017a4a5048 [ 229.907454] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017a4a5000 [ 229.907459] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017a4a5748 [ 229.907463] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017a4a5700 [ 229.931815] [drm:wait_panel_status] Wait complete [ 229.931825] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off [ 229.931847] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003 [ 229.958875] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 229.958903] option 1-3:1.0: device disconnected [ 229.959071] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 229.959093] option 1-3:1.1: device disconnected [ 229.959215] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 [ 229.959236] option 1-3:1.2: device disconnected [ 229.959388] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3 [ 229.959409] option 1-3:1.5: device disconnected [ 229.959415] call 1-3+ returned 0 after 677465 usecs [ 229.965662] [drm:edp_panel_vdd_on] Turning eDP port C VDD on [ 229.965670] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 230.049636] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 230.070041] call 0000:00:1b.0+ returned 0 after 993304 usecs [ 230.081640] [drm:intel_dp_start_link_train] clock recovery OK [ 230.121636] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful [ 230.133709] [drm:g4x_check_srwm] SR watermark: display plane 107, cursor 2 [ 230.133712] [drm:g4x_check_srwm] SR watermark: display plane 211, cursor 2 [ 230.133717] [drm:cherryview_update_wm] Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=61, cursor=2, C: plane=2, cursor=2, SR: plane=107, cursor=2 [ 230.133728] [drm:intel_set_memory_cxsr] memory self-refresh is enabled [ 230.133736] [drm:intel_edp_backlight_on] [ 230.133739] [drm:intel_panel_enable_backlight] pipe B [ 230.133743] [drm:intel_panel_actually_set_backlight] set backlight PWM = 7812 [ 230.149659] [drm:intel_psr_match_conditions] PSR disable by flag [ 230.149676] [drm:i9xx_update_primary_plane] Writing base 000A0000 00000000 0 0 7680 [ 230.149694] [drm:intel_connector_check_state] [CONNECTOR:29:eDP-1] [ 230.149716] [drm:check_encoder_state] [ENCODER:21:TMDS-21] [ 230.149719] [drm:check_encoder_state] [ENCODER:26:TMDS-26] [ 230.149722] [drm:check_encoder_state] [ENCODER:28:TMDS-28] [ 230.149729] [drm:check_encoder_state] [ENCODER:34:TMDS-34] [ 230.149735] [drm:check_encoder_state] [ENCODER:36:TMDS-36] [ 230.149742] [drm:check_crtc_state] [CRTC:8] [ 230.149747] [drm:check_crtc_state] [CRTC:13] [ 230.153237] usb 1-2: reset low-speed USB device number 11 using xhci_hcd [ 230.157672] [drm:check_crtc_state] [CRTC:18] [ 230.157680] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 230.177702] [drm:intel_connector_check_state] [CONNECTOR:29:eDP-1] [ 230.177727] [drm:check_encoder_state] [ENCODER:21:TMDS-21] [ 230.177730] [drm:check_encoder_state] [ENCODER:26:TMDS-26] [ 230.177734] [drm:check_encoder_state] [ENCODER:28:TMDS-28] [ 230.177737] [drm:check_encoder_state] [ENCODER:34:TMDS-34] [ 230.177744] [drm:check_encoder_state] [ENCODER:36:TMDS-36] [ 230.177750] [drm:check_crtc_state] [CRTC:8] [ 230.177755] [drm:check_crtc_state] [CRTC:13] [ 230.183675] [drm:check_crtc_state] [CRTC:18] [ 230.183681] [drm:intel_connector_check_state] [CONNECTOR:29:eDP-1] [ 230.183708] [drm:check_encoder_state] [ENCODER:21:TMDS-21] [ 230.183713] [drm:check_encoder_state] [ENCODER:26:TMDS-26] [ 230.183716] [drm:check_encoder_state] [ENCODER:28:TMDS-28] [ 230.183719] [drm:check_encoder_state] [ENCODER:34:TMDS-34] [ 230.183722] [drm:check_encoder_state] [ENCODER:36:TMDS-36] [ 230.183728] [drm:check_crtc_state] [CRTC:8] [ 230.183735] [drm:check_crtc_state] [CRTC:13] [ 230.191655] [drm:check_crtc_state] [CRTC:18] [ 230.191667] [drm:intel_dp_detect] [CONNECTOR:29:eDP-1] [ 230.225649] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 230.253645] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 230.261657] [drm:drm_helper_hpd_irq_event] [CONNECTOR:29:eDP-1] status updated from unknown to connected [ 230.261684] [drm:drm_fb_helper_hotplug_event] [ 230.261689] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:eDP-1] [ 230.261691] [drm:intel_dp_detect] [CONNECTOR:29:eDP-1] [ 230.297653] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 230.329653] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 230.339666] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 230.339672] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:eDP-1] probed modes : [ 230.339679] [drm:drm_mode_debug_printmodeline] Modeline 30:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 230.339683] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-1] [ 230.339685] [drm:intel_hdmi_detect] [CONNECTOR:22:HDMI-A-1] [ 230.349899] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 230.349903] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 230.355664] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-1] disconnected [ 230.355667] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1] [ 230.355669] [drm:intel_dp_detect] [CONNECTOR:27:DP-1] [ 230.375654] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:DP-1] disconnected [ 230.375658] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] [ 230.375660] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-2] [ 230.383886] [drm:gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 r(1) [ 230.383889] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel [ 230.391655] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:HDMI-A-2] disconnected [ 230.391658] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:DP-2] [ 230.391660] [drm:intel_dp_detect] [CONNECTOR:37:DP-2] [ 230.405655] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:DP-2] disconnected [ 230.405661] [drm:drm_setup_crtcs] [ 230.405664] [drm:drm_enable_connectors] connector 29 enabled? yes [ 230.405666] [drm:drm_enable_connectors] connector 22 enabled? no [ 230.405668] [drm:drm_enable_connectors] connector 27 enabled? no [ 230.405670] [drm:drm_enable_connectors] connector 35 enabled? no [ 230.405672] [drm:drm_enable_connectors] connector 37 enabled? no [ 230.405676] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 230.405678] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 [ 230.405681] [drm:intel_fb_initial_config] connector eDP-1 on pipe B [CRTC:13]: 1920x1080 [ 230.405683] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 230.405685] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 230.405687] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 230.405689] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping [ 230.405692] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 13 [ 230.405703] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 230.405708] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 230.405711] [drm:intel_modeset_stage_output_state] [CONNECTOR:29:eDP-1] to [CRTC:13] [ 230.405716] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 230.405722] [drm:intel_crtc_set_config] [CRTC:13] [FB:39] #connectors=1 (x y) (0 0) [ 230.405726] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0 [ 230.405729] [drm:intel_modeset_stage_output_state] [CONNECTOR:29:eDP-1] to [CRTC:13] [ 230.405732] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 230.405737] [drm:connected_sink_compute_bpp] [CONNECTOR:29:eDP-1] checking for sink bpp constrains [ 230.405741] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 230.405755] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 230.405757] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 230.405761] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 230.405765] [drm:intel_dump_pipe_config] [CRTC:13][modeset] config for pipe B [ 230.405767] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 230.405769] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 230.405774] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 230.405777] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 230.405781] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 230.405782] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 230.405784] [drm:intel_dump_pipe_config] requested mode: [ 230.405789] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 230.405790] [drm:intel_dump_pipe_config] adjusted mode: [ 230.405795] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 230.405800] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 230.405801] [drm:intel_dump_pipe_config] port clock: 270000 [ 230.405803] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 230.405806] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 230.405808] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 230.405810] [drm:intel_dump_pipe_config] ips: 0 [ 230.405812] [drm:intel_dump_pipe_config] double wide: 0 [ 230.405815] [drm:intel_crtc_set_config] [CRTC:18] [NOFB] [ 230.405818] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:18], mode_changed=0, fb_changed=0 [ 230.405821] [drm:intel_modeset_stage_output_state] [CONNECTOR:29:eDP-1] to [CRTC:13] [ 230.405825] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 230.406245] [drm:intel_crtc_set_config] [CRTC:13] [FB:39] #connectors=1 (x y) (0 0) [ 230.406250] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0 [ 230.406253] [drm:intel_modeset_stage_output_state] [CONNECTOR:29:eDP-1] to [CRTC:13] [ 230.406256] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 230.406259] [drm:connected_sink_compute_bpp] [CONNECTOR:29:eDP-1] checking for sink bpp constrains [ 230.406263] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 230.406275] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 230.406277] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 230.406280] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 230.406282] [drm:intel_dump_pipe_config] [CRTC:13][modeset] config for pipe B [ 230.406284] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 230.406286] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 230.406290] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 230.406294] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 230.406297] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 230.406299] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 230.406300] [drm:intel_dump_pipe_config] requested mode: [ 230.406305] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 230.406306] [drm:intel_dump_pipe_config] adjusted mode: [ 230.406311] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 230.406315] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 230.406317] [drm:intel_dump_pipe_config] port clock: 270000 [ 230.406319] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 230.406322] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 230.406324] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 230.406325] [drm:intel_dump_pipe_config] ips: 0 [ 230.406327] [drm:intel_dump_pipe_config] double wide: 0 [ 230.408711] call 0000:00:02.0+ returned 0 after 1324122 usecs [ 230.408940] calling i2c-0+ @ 4530, parent: 0000:00:02.0 [ 230.408944] call i2c-0+ returned 0 after 0 usecs [ 230.408948] calling i2c-1+ @ 4530, parent: 0000:00:02.0 [ 230.408949] call i2c-1+ returned 0 after 0 usecs [ 230.408952] calling i2c-2+ @ 4530, parent: 0000:00:02.0 [ 230.408954] call i2c-2+ returned 0 after 0 usecs [ 230.408956] calling i2c-3+ @ 4530, parent: 0000:00:02.0 [ 230.408958] call i2c-3+ returned 0 after 0 usecs [ 230.408961] calling i2c-4+ @ 4530, parent: 0000:00:02.0 [ 230.408962] call i2c-4+ returned 0 after 0 usecs [ 230.408965] calling i2c-5+ @ 4530, parent: 0000:00:02.0 [ 230.408967] call i2c-5+ returned 0 after 0 usecs [ 230.408971] calling i2c-6+ @ 4530, parent: 0000:00:02.0 [ 230.408973] call i2c-6+ returned 0 after 0 usecs [ 230.408978] calling i2c-7+ @ 4530, parent: 0000:00:02.0 [ 230.408979] call i2c-7+ returned 0 after 0 usecs [ 230.418869] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007b878de0 [ 230.418882] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 230.421889] call 1-2+ returned 0 after 1129065 usecs [ 230.571171] usb 1-5: reset full-speed USB device number 4 using xhci_hcd [ 230.736875] usb 1-5: No LPM exit latency info found, disabling LPM. [ 230.737593] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880175aa5900 [ 230.737599] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880175aa5948 [ 230.737602] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880175aa5990 [ 230.737607] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007b889c00 [ 230.737610] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007b889c48 [ 230.739063] call 1-5+ returned 0 after 1438794 usecs [ 230.760807] [drm:cherryview_enable_rps] GT fifo had a previous error 1080000 [ 230.760850] [drm:cherryview_enable_rps] GPLL enabled? yes [ 230.760853] [drm:cherryview_enable_rps] GPU status: 0x00281410 [ 230.760857] [drm:cherryview_enable_rps] current GPU freq: 200 MHz (20) [ 230.760860] [drm:cherryview_enable_rps] setting GPU freq to 400 MHz (40) [ 230.810207] usb 1-6.5: reset high-speed USB device number 8 using xhci_hcd [ 230.895736] call 1-6.5+ returned 0 after 1081893 usecs [ 230.968168] usb 1-6.2: reset high-speed USB device number 7 using xhci_hcd [ 231.061825] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880175aa5400 [ 231.061830] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880175aa5448 [ 231.061833] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880175aa5490 [ 231.063030] asix 1-6.2:1.0 eth12: unregister 'asix' usb-0000:00:14.0-6.2, ASIX AX88772 USB 2.0 Ethernet [ 231.070823] call 1-6.2+ returned 0 after 1252868 usecs [ 231.308234] usb 1-6.1: reset low-speed USB device number 6 using xhci_hcd [ 231.575633] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007b956780 [ 231.575656] usb 1-6.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 231.580690] call 1-6.1+ returned 0 after 1750703 usecs [ 231.580866] calling input8+ @ 4530, parent: 0003:413C:2107.0002 [ 231.580891] call input8+ returned 0 after 22 usecs [ 231.580904] calling i2c-8+ @ 4530, parent: 0000:00:02.0 [ 231.580906] call i2c-8+ returned 0 after 0 usecs [ 231.580910] calling intel_backlight+ @ 4530, parent: card0-eDP-1 [ 231.580913] call intel_backlight+ returned 0 after 0 usecs [ 231.580916] calling input9+ @ 4530, parent: LNXVIDEO:00 [ 231.580918] call input9+ returned 0 after 0 usecs [ 231.580927] calling iTCO_wdt+ @ 4530, parent: 0000:00:1f.0 [ 231.580929] call iTCO_wdt+ returned 0 after 0 usecs [ 231.580933] calling input10+ @ 4530, parent: pcspkr [ 231.580973] call input10+ returned 0 after 37 usecs [ 231.580995] calling input13+ @ 4530, parent: 0003:046D:C05A.0005 [ 231.580997] call input13+ returned 0 after 0 usecs [ 231.581006] PM: restore of devices complete after 2528.209 msecs [ 232.349518] asix 1-6.2:1.0 eth0: register 'asix' at usb-0000:00:14.0-6.2, ASIX AX88772 USB 2.0 Ethernet, 00:10:60:2c:0a:70 [ 232.349633] option 1-3:1.0: GSM modem (1-port) converter detected [ 232.350042] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB0 [ 232.350096] option 1-3:1.1: GSM modem (1-port) converter detected [ 232.350365] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB1 [ 232.350420] option 1-3:1.2: GSM modem (1-port) converter detected [ 232.350706] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB2 [ 232.350777] option 1-3:1.5: GSM modem (1-port) converter detected [ 232.351034] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB3 [ 232.351452] PM: Image restored successfully. [ 232.351493] PM: Basic memory bitmaps freed [ 232.351498] Restarting tasks ... done. [ 232.395818] asix 1-6.2:1.0 eth12: renamed from eth0 [ 232.404922] systemd-udevd[4720]: renamed network interface eth0 to eth12 [ 232.794629] asix 1-6.2:1.0 eth12: link down [ 233.334892] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off [ 233.334921] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 234.132871] asix 1-6.2:1.0 eth12: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 237.856613] irq 9: nobody cared (try booting with the "irqpoll" option) [ 237.856742] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.18.0-rc6_zzp_5a54f0_20141201+ #22 [ 237.856749] 0000000000000000 ffff88017b00768c ffffffff8177caa0 ffff88017b007600 [ 237.856759] ffffffff81071665 ffff88017b007600 0000000000000000 0000000000000000 [ 237.856765] ffffffff81071a26 00000000000004d0 0000000000000000 0000000000000009 [ 237.856773] Call Trace: [ 237.856778] [] ? dump_stack+0x41/0x51 [ 237.856798] [] ? __report_bad_irq+0x2c/0xb4 [ 237.856805] [] ? note_interrupt+0x18e/0x20c [ 237.856814] [] ? handle_irq_event_percpu+0xed/0x15b [ 237.856821] [] ? handle_irq_event+0x2e/0x4c [ 237.856829] [] ? sched_clock_tick+0x8/0x70 [ 237.856836] [] ? handle_fasteoi_irq+0x71/0xc5 [ 237.856844] [] ? handle_irq+0x15/0x20 [ 237.856851] [] ? do_IRQ+0x43/0xc4 [ 237.856858] [] ? common_interrupt+0x6a/0x6a [ 237.856861] [] ? cpuidle_enter_state+0x71/0x11e [ 237.856873] [] ? cpuidle_enter_state+0x55/0x11e [ 237.856882] [] ? cpu_startup_entry+0x1bb/0x2f0 [ 237.856890] [] ? start_kernel+0x40c/0x417 [ 237.856896] [] ? set_init_arg+0x4e/0x4e [ 237.856901] handlers: [ 237.856950] [] acpi_irq [ 237.857029] Disabling IRQ #9