[ 0.000000] Linux version 3.18.0-rc4+ (sylvain@localhost.localdomain) (gcc version 4.9.2 20141101 (Red Hat 4.9.2-1) (GCC) ) #11 SMP PREEMPT Thu Dec 4 19:55:06 CET 2014 [ 0.000000] Command line: BOOT_IMAGE=/experimental root=/dev/sdb3 [ 0.000000] tseg: 00cf800000 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cd844fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cd845000-0x00000000cdb26fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cdb27000-0x00000000cde78fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cde79000-0x00000000cea3dfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cea3e000-0x00000000cea3efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cea3f000-0x00000000cec44fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cec45000-0x00000000cf06dfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cf06e000-0x00000000cf7eefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cf7ef000-0x00000000cf7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000022fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: MSI MS-7640/990FXA-GD80 (MS-7640), BIOS V13.5 09/17/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x230000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF write-through [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EBFFF uncachable [ 0.000000] EC000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 base 0000CF800000 mask FFFFFF800000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000230000000 aka 8960M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xcf800000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xcf800 max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x0168b000, 0x0168bfff] PGTABLE [ 0.000000] BRK [0x0168c000, 0x0168cfff] PGTABLE [ 0.000000] BRK [0x0168d000, 0x0168dfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x22fe00000-0x22fffffff] [ 0.000000] [mem 0x22fe00000-0x22fffffff] page 2M [ 0.000000] BRK [0x0168e000, 0x0168efff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x22c000000-0x22fdfffff] [ 0.000000] [mem 0x22c000000-0x22fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x200000000-0x22bffffff] [ 0.000000] [mem 0x200000000-0x22bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xcd844fff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G [ 0.000000] [mem 0xc0000000-0xcd7fffff] page 2M [ 0.000000] [mem 0xcd800000-0xcd844fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xcea3e000-0xcea3efff] [ 0.000000] [mem 0xcea3e000-0xcea3efff] page 4k [ 0.000000] BRK [0x0168f000, 0x0168ffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xcec45000-0xcf06dfff] [ 0.000000] [mem 0xcec45000-0xcedfffff] page 4k [ 0.000000] [mem 0xcee00000-0xceffffff] page 2M [ 0.000000] [mem 0xcf000000-0xcf06dfff] page 4k [ 0.000000] BRK [0x01690000, 0x01690fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xcf7ef000-0xcf7fffff] [ 0.000000] [mem 0xcf7ef000-0xcf7fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100001000-0x1ffffffff] [ 0.000000] [mem 0x100001000-0x1001fffff] page 4k [ 0.000000] [mem 0x100200000-0x13fffffff] page 2M [ 0.000000] [mem 0x140000000-0x1ffffffff] page 1G [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000CDE67070 00005C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000CDE6E308 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20140926/tbfadt-649) [ 0.000000] ACPI: DSDT 0x00000000CDE67160 0071A4 (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 0x00000000CDE72080 000040 [ 0.000000] ACPI: APIC 0x00000000CDE6E418 00009E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000CDE6E4B8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000CDE6E500 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.000000] ACPI: HPET 0x00000000CDE6E540 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.000000] ACPI: SSDT 0x00000000CDE6E578 001A5C (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: IVRS 0x00000000CDE6FFD8 0000D0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x22ffe6000-0x22fff9fff] [ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227600000-ffff88022f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x22fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0xcd844fff] [ 0.000000] node 0: [mem 0xcea3e000-0xcea3efff] [ 0.000000] node 0: [mem 0xcec45000-0xcf06dfff] [ 0.000000] node 0: [mem 0xcf7ef000-0xcf7fffff] [ 0.000000] node 0: [mem 0x100001000-0x22fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x22fffffff] [ 0.000000] On node 0 totalpages: 2087964 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13106 pages used for memmap [ 0.000000] DMA32 zone: 838784 pages, LIFO batch:31 [ 0.000000] Normal zone: 19456 pages used for memmap [ 0.000000] Normal zone: 1245183 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xfec20000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] e820: [mem 0xcf800000-0xfebfffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88022fc00000 s74368 r8192 d32128 u262144 [ 0.000000] pcpu-alloc: s74368 r8192 d32128 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2055317 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/experimental root=/dev/sdb3 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form [ 0.000000] Memory: 8146768K/8351856K available (3986K kernel code, 407K rwdata, 820K rodata, 740K init, 712K bss, 205088K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP. [ 0.000000] NR_IRQS:4352 nr_irqs:1032 0 [ 0.000000] NO_HZ: Clearing 0 from nohz_full range for timekeeping [ 0.000000] NO_HZ: Full dynticks CPUs: 1-7. [ 0.000000] Offload RCU callbacks from CPUs: 1-7. [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 4700.215 MHz processor [ 0.000014] Calibrating delay loop (skipped), value calculated using timer frequency.. 9400.43 BogoMIPS (lpj=4700215) [ 0.000133] pid_max: default: 32768 minimum: 301 [ 0.000195] ACPI: Core revision 20140926 [ 0.002318] ACPI: All ACPI Tables successfully acquired [ 0.020703] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.022524] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.023331] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.023397] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.023649] CPU: Physical Processor ID: 0 [ 0.023709] CPU: Processor Core ID: 0 [ 0.023768] mce: CPU supports 7 MCE banks [ 0.023831] LVT offset 1 assigned for vector 0xf9 [ 0.023894] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.024043] Freeing SMP alternatives memory: 16K (ffffffff815d4000 - ffffffff815d8000) [ 0.097163] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.107232] smpboot: CPU0: AMD FX(tm)-9590 Eight-Core Processor (fam: 15, model: 02, stepping: 00) [ 0.209119] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.209262] ... version: 0 [ 0.209347] ... bit width: 48 [ 0.209406] ... generic registers: 6 [ 0.209465] ... value mask: 0000ffffffffffff [ 0.209525] ... max period: 00007fffffffffff [ 0.209584] ... fixed-purpose events: 0 [ 0.209643] ... event mask: 000000000000003f [ 0.215172] x86: Booting SMP configuration: [ 0.215233] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.318374] x86: Booted up 1 node, 8 CPUs [ 0.318492] smpboot: Total of 8 processors activated (75203.44 BogoMIPS) [ 0.326902] devtmpfs: initialized [ 0.327153] NET: Registered protocol family 16 [ 0.332181] cpuidle: using governor ladder [ 0.338184] cpuidle: using governor menu [ 0.338290] ACPI: bus type PCI registered [ 0.338374] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.338467] PCI: not using MMCONFIG [ 0.338526] PCI: Using configuration type 1 for base access [ 0.338585] PCI: Using configuration type 1 for extended access [ 0.339368] ACPI: Added _OSI(Module Device) [ 0.339428] ACPI: Added _OSI(Processor Device) [ 0.339488] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.339547] ACPI: Added _OSI(Processor Aggregator Device) [ 0.340658] ACPI: Executed 2 blocks of module-level executable AML code [ 0.348419] ACPI: Interpreter enabled [ 0.348482] ACPI: (supports S0 S5) [ 0.348542] ACPI: Using IOAPIC for interrupt routing [ 0.348712] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.348826] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.349099] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.407756] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.407819] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI] [ 0.407881] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.408072] PCI host bridge to bus 0000:00 [ 0.408132] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.408192] pci_bus 0000:00: root bus resource [io 0x0000-0x03af] [ 0.408256] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7] [ 0.408317] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df] [ 0.408377] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.408437] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.408498] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.408585] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff] [ 0.408653] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000 [ 0.408729] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 [ 0.408798] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.408827] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.408869] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400 [ 0.408898] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.408940] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400 [ 0.408968] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.409009] pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400 [ 0.409037] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.409078] pci 0000:00:07.0: [1002:5a1b] type 01 class 0x060400 [ 0.409106] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.409157] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 0.409170] pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047] [ 0.409177] pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033] [ 0.409184] pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027] [ 0.409190] pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013] [ 0.409197] pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f] [ 0.409203] pci 0000:00:11.0: reg 0x24: [mem 0xfeb07000-0xfeb073ff] [ 0.409277] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.409286] pci 0000:00:12.0: reg 0x10: [mem 0xfeb06000-0xfeb06fff] [ 0.409367] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.409380] pci 0000:00:12.2: reg 0x10: [mem 0xfeb05000-0xfeb050ff] [ 0.409437] pci 0000:00:12.2: supports D1 D2 [ 0.409438] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.409486] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.409495] pci 0000:00:13.0: reg 0x10: [mem 0xfeb04000-0xfeb04fff] [ 0.409574] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.409587] pci 0000:00:13.2: reg 0x10: [mem 0xfeb03000-0xfeb030ff] [ 0.409645] pci 0000:00:13.2: supports D1 D2 [ 0.409646] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.409692] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.409775] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.409859] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.409919] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.409929] pci 0000:00:14.5: reg 0x10: [mem 0xfeb02000-0xfeb02fff] [ 0.410007] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 0.410017] pci 0000:00:16.0: reg 0x10: [mem 0xfeb01000-0xfeb01fff] [ 0.410097] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 0.410110] pci 0000:00:16.2: reg 0x10: [mem 0xfeb00000-0xfeb000ff] [ 0.410168] pci 0000:00:16.2: supports D1 D2 [ 0.410169] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.410218] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 [ 0.410262] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 [ 0.410303] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 [ 0.410345] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 [ 0.410388] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 [ 0.410431] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 [ 0.410505] pci 0000:01:00.0: [1002:6798] type 00 class 0x030000 [ 0.410515] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.410522] pci 0000:01:00.0: reg 0x18: [mem 0xfea00000-0xfea3ffff 64bit] [ 0.410527] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 0.410536] pci 0000:01:00.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref] [ 0.410573] pci 0000:01:00.0: supports D1 D2 [ 0.410574] pci 0000:01:00.0: PME# supported from D1 D2 D3hot [ 0.410613] pci 0000:01:00.1: [1002:aaa0] type 00 class 0x040300 [ 0.410623] pci 0000:01:00.1: reg 0x10: [mem 0xfea60000-0xfea63fff 64bit] [ 0.410672] pci 0000:01:00.1: supports D1 D2 [ 0.410697] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.410758] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.410760] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.410762] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.410797] pci 0000:02:00.0: [197b:2362] type 00 class 0x010601 [ 0.410819] pci 0000:02:00.0: reg 0x10: [io 0xd040-0xd047] [ 0.410828] pci 0000:02:00.0: reg 0x14: [io 0xd030-0xd033] [ 0.410838] pci 0000:02:00.0: reg 0x18: [io 0xd020-0xd027] [ 0.410847] pci 0000:02:00.0: reg 0x1c: [io 0xd010-0xd013] [ 0.410856] pci 0000:02:00.0: reg 0x20: [io 0xd000-0xd00f] [ 0.410865] pci 0000:02:00.0: reg 0x24: [mem 0xfe900000-0xfe9001ff] [ 0.410875] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.410916] pci 0000:02:00.0: PME# supported from D3hot [ 0.410947] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.411036] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] [ 0.411037] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.411072] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.411084] pci 0000:03:00.0: reg 0x10: [io 0xc000-0xc0ff] [ 0.411102] pci 0000:03:00.0: reg 0x18: [mem 0xfe804000-0xfe804fff 64bit pref] [ 0.411114] pci 0000:03:00.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref] [ 0.411174] pci 0000:03:00.0: supports D1 D2 [ 0.411175] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.411209] pci 0000:00:05.0: PCI bridge to [bus 03] [ 0.411271] pci 0000:00:05.0: bridge window [io 0xc000-0xcfff] [ 0.411273] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.411308] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.411322] pci 0000:04:00.0: reg 0x10: [mem 0xfe700000-0xfe701fff 64bit] [ 0.411394] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.411429] pci 0000:00:06.0: PCI bridge to [bus 04] [ 0.411491] pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.411526] pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.411540] pci 0000:05:00.0: reg 0x10: [mem 0xfe600000-0xfe601fff 64bit] [ 0.411612] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 0.411643] pci 0000:00:07.0: PCI bridge to [bus 05] [ 0.411705] pci 0000:00:07.0: bridge window [mem 0xfe600000-0xfe6fffff] [ 0.411755] pci 0000:00:14.4: PCI bridge to [bus 06] (subtractive decode) [ 0.411820] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode) [ 0.411821] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode) [ 0.411822] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode) [ 0.411824] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.411825] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.411826] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.411827] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode) [ 0.411850] pci_bus 0000:00: on NUMA node 0 [ 0.412078] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0 [ 0.412448] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0 [ 0.412790] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0 [ 0.413135] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 10 11 14 15) *0 [ 0.414429] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0 [ 0.414782] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 10 11 14 15) *0 [ 0.415082] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0 [ 0.415411] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0 [ 0.415818] SCSI subsystem initialized [ 0.415912] libata version 3.00 loaded. [ 0.415913] ACPI: bus type USB registered [ 0.415983] usbcore: registered new interface driver usbfs [ 0.416048] usbcore: registered new interface driver hub [ 0.416138] usbcore: registered new device driver usb [ 0.416208] PCI: Using ACPI for IRQ routing [ 0.422186] PCI: pci_cache_line_size set to 64 bytes [ 0.422228] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff] [ 0.422230] e820: reserve RAM buffer [mem 0xcd845000-0xcfffffff] [ 0.422231] e820: reserve RAM buffer [mem 0xcea3f000-0xcfffffff] [ 0.422232] e820: reserve RAM buffer [mem 0xcf06e000-0xcfffffff] [ 0.422232] e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff] [ 0.422294] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.422462] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.424558] Switched to clocksource hpet [ 0.424642] pnp: PnP ACPI init [ 0.424742] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.424803] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.424964] system 00:01: [io 0x040b] has been reserved [ 0.425024] system 00:01: [io 0x04d6] has been reserved [ 0.425084] system 00:01: [io 0x0c00-0x0c01] has been reserved [ 0.425145] system 00:01: [io 0x0c14] has been reserved [ 0.425205] system 00:01: [io 0x0c50-0x0c51] has been reserved [ 0.425270] system 00:01: [io 0x0c52] has been reserved [ 0.425330] system 00:01: [io 0x0c6c] has been reserved [ 0.425390] system 00:01: [io 0x0c6f] has been reserved [ 0.425470] system 00:01: [io 0x0cd0-0x0cd1] has been reserved [ 0.425531] system 00:01: [io 0x0cd2-0x0cd3] has been reserved [ 0.425594] system 00:01: [io 0x0cd4-0x0cd5] has been reserved [ 0.425681] system 00:01: [io 0x0cd6-0x0cd7] has been reserved [ 0.425741] system 00:01: [io 0x0cd8-0x0cdf] has been reserved [ 0.425801] system 00:01: [io 0x0800-0x089f] could not be reserved [ 0.425861] system 00:01: [io 0x0b20-0x0b3f] has been reserved [ 0.425922] system 00:01: [io 0x0900-0x090f] has been reserved [ 0.425982] system 00:01: [io 0x0910-0x091f] has been reserved [ 0.426042] system 00:01: [io 0xfe00-0xfefe] has been reserved [ 0.426102] system 00:01: [io 0x0485-0x0486] has been reserved [ 0.426163] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.426223] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.426284] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.426344] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.426405] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.426466] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved [ 0.426526] system 00:01: [mem 0xff800000-0xffffffff] has been reserved [ 0.426591] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.426666] system 00:02: [io 0x0480-0x0481] has been reserved [ 0.426727] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.426804] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.426835] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.426923] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.426944] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.427029] system 00:06: [mem 0xfeb20000-0xfeb23fff] could not be reserved [ 0.427090] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.427159] system 00:07: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.427220] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.427281] pnp: PnP ACPI: found 8 devices [ 0.433051] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.433112] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.433173] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.433234] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.433327] pci 0000:02:00.0: BAR 6: assigned [mem 0xfe910000-0xfe91ffff pref] [ 0.433417] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.433476] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] [ 0.433537] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.433602] pci 0000:00:05.0: PCI bridge to [bus 03] [ 0.433661] pci 0000:00:05.0: bridge window [io 0xc000-0xcfff] [ 0.433721] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.433783] pci 0000:00:06.0: PCI bridge to [bus 04] [ 0.433843] pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.433905] pci 0000:00:07.0: PCI bridge to [bus 05] [ 0.433965] pci 0000:00:07.0: bridge window [mem 0xfe600000-0xfe6fffff] [ 0.434027] pci 0000:00:14.4: PCI bridge to [bus 06] [ 0.434093] pci_bus 0000:00: resource 4 [io 0x0000-0x03af] [ 0.434095] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7] [ 0.434096] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df] [ 0.434097] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff] [ 0.434098] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff] [ 0.434099] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff] [ 0.434100] pci_bus 0000:00: resource 10 [mem 0xd0000000-0xffffffff] [ 0.434101] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.434103] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.434104] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.434105] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.434106] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.434107] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] [ 0.434108] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff] [ 0.434109] pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff] [ 0.434110] pci_bus 0000:05: resource 1 [mem 0xfe600000-0xfe6fffff] [ 0.434111] pci_bus 0000:06: resource 4 [io 0x0000-0x03af] [ 0.434112] pci_bus 0000:06: resource 5 [io 0x03e0-0x0cf7] [ 0.434113] pci_bus 0000:06: resource 6 [io 0x03b0-0x03df] [ 0.434114] pci_bus 0000:06: resource 7 [io 0x0d00-0xffff] [ 0.434115] pci_bus 0000:06: resource 8 [mem 0x000a0000-0x000bffff] [ 0.434116] pci_bus 0000:06: resource 9 [mem 0x000c0000-0x000dffff] [ 0.434118] pci_bus 0000:06: resource 10 [mem 0xd0000000-0xffffffff] [ 0.434128] NET: Registered protocol family 2 [ 0.434291] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.434515] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.434726] TCP: Hash tables configured (established 65536 bind 65536) [ 0.434804] TCP: reno registered [ 0.434871] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.434956] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.435059] NET: Registered protocol family 1 [ 0.726879] pci 0000:01:00.0: Video device with shadowed ROM [ 0.727025] PCI: CLS 64 bytes, default 64 [ 0.727462] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40 [ 0.727522] AMD-Vi: Interrupt remapping enabled [ 0.727615] pci 0000:00:00.2: irq 26 for MSI/MSI-X [ 0.732602] AMD-Vi: Lazy IO/TLB flushing enabled [ 0.805594] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.805655] software IO TLB [mem 0xc9845000-0xcd845000] (64MB) mapped at [ffff8800c9845000-ffff8800cd844fff] [ 0.806008] perf: AMD NB counters detected [ 0.806104] microcode: CPU0: patch_level=0x06000822 [ 0.806167] microcode: CPU1: patch_level=0x06000822 [ 0.806233] microcode: CPU2: patch_level=0x06000822 [ 0.806298] microcode: CPU3: patch_level=0x06000822 [ 0.806364] microcode: CPU4: patch_level=0x06000822 [ 0.806430] microcode: CPU5: patch_level=0x06000822 [ 0.806495] microcode: CPU6: patch_level=0x06000822 [ 0.806561] microcode: CPU7: patch_level=0x06000822 [ 0.806663] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.806757] LVT offset 0 assigned for vector 0x400 [ 0.806840] perf: AMD IBS detected (0x000000ff) [ 0.807329] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.808482] msgmni has been set to 15911 [ 0.808690] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.808781] io scheduler noop registered (default) [ 0.808911] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.809003] ACPI: Power Button [PWRB] [ 0.809086] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.809177] ACPI: Power Button [PWRF] [ 0.809288] ACPI: acpi_idle registered with cpuidle [ 0.809899] ahci 0000:00:11.0: version 3.0 [ 0.810012] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.810105] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 0.810637] scsi host0: ahci [ 0.810825] scsi host1: ahci [ 0.810961] scsi host2: ahci [ 0.811093] scsi host3: ahci [ 0.811226] scsi host4: ahci [ 0.811359] scsi host5: ahci [ 0.811442] ata1: SATA max UDMA/133 abar m1024@0xfeb07000 port 0xfeb07100 irq 19 [ 0.811534] ata2: SATA max UDMA/133 abar m1024@0xfeb07000 port 0xfeb07180 irq 19 [ 0.811626] ata3: SATA max UDMA/133 abar m1024@0xfeb07000 port 0xfeb07200 irq 19 [ 0.811717] ata4: SATA max UDMA/133 abar m1024@0xfeb07000 port 0xfeb07280 irq 19 [ 0.811819] ata5: SATA max UDMA/133 abar m1024@0xfeb07000 port 0xfeb07300 irq 19 [ 0.811941] ata6: SATA max UDMA/133 abar m1024@0xfeb07000 port 0xfeb07380 irq 19 [ 0.812168] ahci 0000:02:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 0.812310] ahci 0000:02:00.0: flags: 64bit ncq led clo pmp pio [ 0.812569] scsi host6: ahci [ 0.812704] scsi host7: ahci [ 0.812787] ata7: SATA max UDMA/133 abar m512@0xfe900000 port 0xfe900100 irq 28 [ 0.812887] ata8: SATA max UDMA/133 abar m512@0xfe900000 port 0xfe900180 irq 28 [ 0.812995] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.813393] r8169 0000:03:00.0: irq 30 for MSI/MSI-X [ 0.813492] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc90010e86000, 44:8a:5b:60:b6:b6, XID 0c900800 IRQ 30 [ 0.813585] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 0.813729] QUIRK: Enable AMD PLL fix [ 0.813734] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 0.813798] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 1 [ 0.814044] xhci_hcd 0000:04:00.0: irq 32 for MSI/MSI-X [ 0.814049] xhci_hcd 0000:04:00.0: irq 33 for MSI/MSI-X [ 0.814054] xhci_hcd 0000:04:00.0: irq 34 for MSI/MSI-X [ 0.814058] xhci_hcd 0000:04:00.0: irq 35 for MSI/MSI-X [ 0.814062] xhci_hcd 0000:04:00.0: irq 36 for MSI/MSI-X [ 0.814066] xhci_hcd 0000:04:00.0: irq 37 for MSI/MSI-X [ 0.814070] xhci_hcd 0000:04:00.0: irq 38 for MSI/MSI-X [ 0.814074] xhci_hcd 0000:04:00.0: irq 39 for MSI/MSI-X [ 0.814178] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.814239] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.814358] usb usb1: Product: xHCI Host Controller [ 0.814417] usb usb1: Manufacturer: Linux 3.18.0-rc4+ xhci-hcd [ 0.814477] usb usb1: SerialNumber: 0000:04:00.0 [ 0.814600] hub 1-0:1.0: USB hub found [ 0.814665] hub 1-0:1.0: 2 ports detected [ 0.814761] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 0.814842] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2 [ 0.817507] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.817571] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.817661] usb usb2: Product: xHCI Host Controller [ 0.817720] usb usb2: Manufacturer: Linux 3.18.0-rc4+ xhci-hcd [ 0.817780] usb usb2: SerialNumber: 0000:04:00.0 [ 0.817912] hub 2-0:1.0: USB hub found [ 0.817977] hub 2-0:1.0: 2 ports detected [ 0.818123] xhci_hcd 0000:05:00.0: xHCI Host Controller [ 0.818185] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3 [ 0.818390] xhci_hcd 0000:05:00.0: irq 41 for MSI/MSI-X [ 0.818394] xhci_hcd 0000:05:00.0: irq 42 for MSI/MSI-X [ 0.818398] xhci_hcd 0000:05:00.0: irq 43 for MSI/MSI-X [ 0.818401] xhci_hcd 0000:05:00.0: irq 44 for MSI/MSI-X [ 0.818405] xhci_hcd 0000:05:00.0: irq 45 for MSI/MSI-X [ 0.818409] xhci_hcd 0000:05:00.0: irq 46 for MSI/MSI-X [ 0.818414] xhci_hcd 0000:05:00.0: irq 47 for MSI/MSI-X [ 0.818417] xhci_hcd 0000:05:00.0: irq 48 for MSI/MSI-X [ 0.818516] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.818576] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.818667] usb usb3: Product: xHCI Host Controller [ 0.818726] usb usb3: Manufacturer: Linux 3.18.0-rc4+ xhci-hcd [ 0.818785] usb usb3: SerialNumber: 0000:05:00.0 [ 0.818912] hub 3-0:1.0: USB hub found [ 0.818976] hub 3-0:1.0: 2 ports detected [ 0.819069] xhci_hcd 0000:05:00.0: xHCI Host Controller [ 0.819129] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4 [ 0.821855] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.821920] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.822011] usb usb4: Product: xHCI Host Controller [ 0.822070] usb usb4: Manufacturer: Linux 3.18.0-rc4+ xhci-hcd [ 0.823111] usb usb4: SerialNumber: 0000:05:00.0 [ 0.823229] hub 4-0:1.0: USB hub found [ 0.823293] hub 4-0:1.0: 2 ports detected [ 0.823389] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.823449] ehci-pci: EHCI PCI platform driver [ 0.823556] ehci-pci 0000:00:12.2: EHCI Host Controller [ 0.823617] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 5 [ 0.823709] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 0.823807] ehci-pci 0000:00:12.2: debug port 1 [ 0.823900] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb05000 [ 0.829837] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 0.829924] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.829984] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.830075] usb usb5: Product: EHCI Host Controller [ 0.830134] usb usb5: Manufacturer: Linux 3.18.0-rc4+ ehci_hcd [ 0.830194] usb usb5: SerialNumber: 0000:00:12.2 [ 0.830338] hub 5-0:1.0: USB hub found [ 0.830401] hub 5-0:1.0: 5 ports detected [ 0.830556] ehci-pci 0000:00:13.2: EHCI Host Controller [ 0.830619] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 6 [ 0.830711] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 0.830808] ehci-pci 0000:00:13.2: debug port 1 [ 0.830893] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb03000 [ 0.836840] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 0.836922] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.836982] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.837074] usb usb6: Product: EHCI Host Controller [ 0.837133] usb usb6: Manufacturer: Linux 3.18.0-rc4+ ehci_hcd [ 0.837193] usb usb6: SerialNumber: 0000:00:13.2 [ 0.837314] hub 6-0:1.0: USB hub found [ 0.837377] hub 6-0:1.0: 5 ports detected [ 0.837532] ehci-pci 0000:00:16.2: EHCI Host Controller [ 0.837621] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 7 [ 0.837713] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 0.837811] ehci-pci 0000:00:16.2: debug port 1 [ 0.837895] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb00000 [ 0.843844] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 0.843930] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.843990] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.844081] usb usb7: Product: EHCI Host Controller [ 0.844141] usb usb7: Manufacturer: Linux 3.18.0-rc4+ ehci_hcd [ 0.844201] usb usb7: SerialNumber: 0000:00:16.2 [ 0.844331] hub 7-0:1.0: USB hub found [ 0.844393] hub 7-0:1.0: 4 ports detected [ 0.844499] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.844559] ohci-pci: OHCI PCI platform driver [ 0.844669] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 0.844731] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 8 [ 0.844846] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb06000 [ 0.899946] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.900006] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.900098] usb usb8: Product: OHCI PCI host controller [ 0.900157] usb usb8: Manufacturer: Linux 3.18.0-rc4+ ohci_hcd [ 0.900217] usb usb8: SerialNumber: 0000:00:12.0 [ 0.900352] hub 8-0:1.0: USB hub found [ 0.900416] hub 8-0:1.0: 5 ports detected [ 0.900569] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 0.900632] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9 [ 0.900731] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb04000 [ 0.954965] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.955026] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.955117] usb usb9: Product: OHCI PCI host controller [ 0.955177] usb usb9: Manufacturer: Linux 3.18.0-rc4+ ohci_hcd [ 0.955236] usb usb9: SerialNumber: 0000:00:13.0 [ 0.955361] hub 9-0:1.0: USB hub found [ 0.955426] hub 9-0:1.0: 5 ports detected [ 0.955580] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 0.955643] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10 [ 0.955741] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb02000 [ 1.009995] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.010056] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.010146] usb usb10: Product: OHCI PCI host controller [ 1.010206] usb usb10: Manufacturer: Linux 3.18.0-rc4+ ohci_hcd [ 1.010266] usb usb10: SerialNumber: 0000:00:14.5 [ 1.010392] hub 10-0:1.0: USB hub found [ 1.010456] hub 10-0:1.0: 2 ports detected [ 1.010595] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 1.010657] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11 [ 1.010757] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb01000 [ 1.065034] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.065094] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.065185] usb usb11: Product: OHCI PCI host controller [ 1.065245] usb usb11: Manufacturer: Linux 3.18.0-rc4+ ohci_hcd [ 1.065305] usb usb11: SerialNumber: 0000:00:16.0 [ 1.065426] hub 11-0:1.0: USB hub found [ 1.065490] hub 11-0:1.0: 4 ports detected [ 1.065666] rtc_cmos 00:03: RTC can wake from S4 [ 1.065799] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.065877] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.065980] i2c /dev entries driver [ 1.066403] usbcore: registered new interface driver usbhid [ 1.066462] usbhid: USB HID core driver [ 1.066521] AMD IOMMUv2 driver by Joerg Roedel [ 1.066580] AMD IOMMUv2 functionality not available on this system [ 1.066667] TCP: cubic registered [ 1.066778] NET: Registered protocol family 10 [ 1.067000] NET: Registered protocol family 17 [ 1.067899] acpi-cpufreq: overriding BIOS provided _PSD data [ 1.117049] ata2: SATA link down (SStatus 0 SControl 300) [ 1.117189] ata4: SATA link down (SStatus 0 SControl 300) [ 1.119057] ata7: SATA link down (SStatus 0 SControl 300) [ 1.119144] ata8: SATA link down (SStatus 0 SControl 300) [ 1.272132] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.272208] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.272283] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.272361] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.272519] ata3.00: ATA-8: OCZ AGILITY-EX, 1.6, max UDMA/133 [ 1.272590] ata3.00: 125045424 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.273212] ata5.00: ATA-8: SanDisk SDSSDHP064G, X2306RL, max UDMA/133 [ 1.273282] ata5.00: 125045424 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.273352] ata6.00: ATA-8: SanDisk SDSSDHP128G, X2306RL, max UDMA/133 [ 1.273420] ata6.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.273562] ata3.00: configured for UDMA/133 [ 1.274393] ata5.00: configured for UDMA/133 [ 1.274514] ata6.00: configured for UDMA/133 [ 1.275246] ata1.00: ATA-7: WDC WD740ADFD-00NLR5, 21.07QR5, max UDMA/133 [ 1.275308] ata1.00: 145226112 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.278902] ata1.00: configured for UDMA/133 [ 1.279019] scsi 0:0:0:0: Direct-Access ATA WDC WD740ADFD-00 7QR5 PQ: 0 ANSI: 5 [ 1.279253] sd 0:0:0:0: [sda] 145226112 512-byte logical blocks: (74.3 GB/69.2 GiB) [ 1.279259] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.279367] scsi 2:0:0:0: Direct-Access ATA OCZ AGILITY-EX 1.6 PQ: 0 ANSI: 5 [ 1.279467] sd 2:0:0:0: [sdb] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB) [ 1.279496] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.279573] sd 2:0:0:0: [sdb] Write Protect is off [ 1.279574] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.279603] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.279621] scsi 4:0:0:0: Direct-Access ATA SanDisk SDSSDHP0 6RL PQ: 0 ANSI: 5 [ 1.279726] sd 4:0:0:0: [sdc] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB) [ 1.279735] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 1.279805] sd 4:0:0:0: [sdc] Write Protect is off [ 1.279806] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.279825] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.279834] scsi 5:0:0:0: Direct-Access ATA SanDisk SDSSDHP1 6RL PQ: 0 ANSI: 5 [ 1.279964] sd 5:0:0:0: [sdd] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 1.279998] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 1.280078] sd 5:0:0:0: [sdd] Write Protect is off [ 1.280080] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 1.280112] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.280158] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 > [ 1.280370] sdd: unknown partition table [ 1.280383] sdc: sdc1 sdc2 < sdc5 > [ 1.280554] sd 2:0:0:0: [sdb] Attached SCSI disk [ 1.280582] sd 5:0:0:0: [sdd] Attached SCSI disk [ 1.280694] sd 4:0:0:0: [sdc] Attached SCSI disk [ 1.281520] sd 0:0:0:0: [sda] Write Protect is off [ 1.281582] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.281600] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.289227] sda: sda1 [ 1.289434] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.289617] EXT4-fs (sdb3): couldn't mount as ext3 due to feature incompatibilities [ 1.289776] EXT4-fs (sdb3): couldn't mount as ext2 due to feature incompatibilities [ 1.292060] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null) [ 1.292159] VFS: Mounted root (ext4 filesystem) readonly on device 8:19. [ 1.294715] devtmpfs: mounted [ 1.294949] Freeing unused kernel memory: 740K (ffffffff8151b000 - ffffffff815d4000) [ 1.308168] usb 8-5: new full-speed USB device number 2 using ohci-pci [ 1.369103] random: systemd urandom read with 28 bits of entropy available [ 1.369573] systemd[1]: systemd 217 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN ) [ 1.369857] systemd[1]: Detected architecture 'x86-64'. [ 1.370539] systemd[1]: Set hostname to . [ 1.388195] usb 11-1: new low-speed USB device number 2 using ohci-pci [ 1.467275] usb 8-5: New USB device found, idVendor=05a7, idProduct=1020 [ 1.467340] usb 8-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.467410] usb 8-5: Product: Bose USB Audio [ 1.467471] usb 8-5: Manufacturer: Bose Corporation [ 1.467959] systemd[1]: Configuration file /usr/lib/systemd/system/auditd.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway. [ 1.479290] hid-generic 0003:05A7:1020.0001: device has no listeners, quitting [ 1.500867] systemd[1]: Cannot add dependency job for unit systemd-readahead-collect.service, ignoring: Unit systemd-readahead-collect.service failed to load: No such file or directory. [ 1.500996] systemd[1]: Cannot add dependency job for unit systemd-readahead-replay.service, ignoring: Unit systemd-readahead-replay.service failed to load: No such file or directory. [ 1.501507] systemd[1]: Starting User and Group Name Lookups. [ 1.501842] systemd[1]: Reached target User and Group Name Lookups. [ 1.501909] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 1.502025] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 1.502121] systemd[1]: Starting Login Prompts. [ 1.502416] systemd[1]: Reached target Login Prompts. [ 1.502517] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 1.502615] systemd[1]: Expecting device dev-disk-by\x2duuid-8e7eb13d\x2ddc57\x2d4f32\x2db926\x2d3ff9dd598914.device... [ 1.502871] systemd[1]: Expecting device dev-disk-by\x2duuid-d3276d74\x2d794f\x2d4277\x2da8de\x2d7a74214d7b2e.device... [ 1.503126] systemd[1]: Expecting device dev-disk-by\x2duuid-92139dcb\x2d2ae2\x2d468e\x2d9e63\x2dcc51bbade8de.device... [ 1.503394] systemd[1]: Starting Root Slice. [ 1.503683] systemd[1]: Created slice Root Slice. [ 1.503776] systemd[1]: Starting User and Session Slice. [ 1.504076] systemd[1]: Created slice User and Session Slice. [ 1.504142] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 1.504453] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 1.504519] systemd[1]: Starting Delayed Shutdown Socket. [ 1.504811] systemd[1]: Listening on Delayed Shutdown Socket. [ 1.504877] systemd[1]: Starting Journal Socket (/dev/log). [ 1.505198] systemd[1]: Listening on Journal Socket (/dev/log). [ 1.505274] systemd[1]: Starting Device-mapper event daemon FIFOs. [ 1.505571] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 1.505637] systemd[1]: Starting LVM2 metadata daemon socket. [ 1.505929] systemd[1]: Listening on LVM2 metadata daemon socket. [ 1.505997] systemd[1]: Starting udev Control Socket. [ 1.506328] systemd[1]: Listening on udev Control Socket. [ 1.506395] systemd[1]: Starting udev Kernel Socket. [ 1.506684] systemd[1]: Listening on udev Kernel Socket. [ 1.506750] systemd[1]: Starting Journal Socket. [ 1.507047] systemd[1]: Listening on Journal Socket. [ 1.507117] systemd[1]: Starting System Slice. [ 1.507458] systemd[1]: Created slice System Slice. [ 1.507525] systemd[1]: Starting system-getty.slice. [ 1.507825] systemd[1]: Created slice system-getty.slice. [ 1.507893] systemd[1]: Starting File System Check on Root Device... [ 1.508343] systemd[1]: Starting system-systemd\x2dfsck.slice. [ 1.508698] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 1.511278] systemd[1]: Mounting Temporary Directory... [ 1.512202] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [ 1.512585] systemd[1]: Started Device-Mapper Multipath Device Controller. [ 1.512663] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 1.513157] systemd[1]: Starting Setup Virtual Console... [ 1.513646] systemd[1]: Mounted Huge Pages File System. [ 1.513735] systemd[1]: Starting udev Coldplug all Devices... [ 1.514233] systemd[1]: Mounted POSIX Message Queue File System. [ 1.514359] systemd[1]: Mounted Debug File System. [ 1.519277] systemd[1]: Started Load Kernel Modules. [ 1.519359] systemd[1]: Starting Apply Kernel Variables... [ 1.519876] systemd[1]: Mounted Configuration File System. [ 1.527186] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 1.527696] systemd[1]: Mounted FUSE Control File System. [ 1.531550] systemd[1]: Started Load legacy module configuration. [ 1.535389] systemd[1]: Started Set Up Additional Binary Formats. [ 1.535507] systemd[1]: Starting Journal Service... [ 1.536003] systemd[1]: Starting Slices. [ 1.536306] systemd[1]: Reached target Slices. [ 1.536749] systemd[1]: Mounted Temporary Directory. [ 1.537547] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 1.551305] systemd[1]: Started udev Coldplug all Devices. [ 1.551806] systemd[1]: Started Apply Kernel Variables. [ 1.556092] systemd[1]: Starting LVM2 metadata daemon... [ 1.556919] systemd[1]: Started LVM2 metadata daemon. [ 1.556954] systemd[1]: Starting udev Wait for Complete Device Initialization... [ 1.557331] usb 11-1: New USB device found, idVendor=1e54, idProduct=2030 [ 1.557333] usb 11-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.557333] usb 11-1: Product: USB Keyboard [ 1.557334] usb 11-1: Manufacturer: TypeMatrix.com [ 1.579107] systemd[1]: Started Journal Service. [ 1.581470] input: TypeMatrix.com USB Keyboard as /devices/pci0000:00/0000:00:16.0/usb11/11-1/11-1:1.0/0003:1E54:2030.0002/input/input2 [ 1.581601] hid-generic 0003:1E54:2030.0002: input: USB HID v1.10 Keyboard [TypeMatrix.com USB Keyboard] on usb-0000:00:16.0-1/input0 [ 1.601437] input: TypeMatrix.com USB Keyboard as /devices/pci0000:00/0000:00:16.0/usb11/11-1/11-1:1.1/0003:1E54:2030.0003/input/input3 [ 1.601589] hid-generic 0003:1E54:2030.0003: input: USB HID v1.10 Device [TypeMatrix.com USB Keyboard] on usb-0000:00:16.0-1/input1 [ 1.667700] EXT4-fs (sdb3): re-mounted. Opts: (null) [ 1.677388] systemd-journald[150]: Received request to flush runtime journal from PID 1 [ 1.724399] usb 11-3: new full-speed USB device number 3 using ohci-pci [ 1.808450] tsc: Refined TSC clocksource calibration: 4700.221 MHz [ 1.869597] [drm] Initialized drm 1.1.0 20060810 [ 1.885543] usb 11-3: New USB device found, idVendor=046d, idProduct=c048 [ 1.885608] usb 11-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.885700] usb 11-3: Product: G9 Laser Mouse [ 1.885761] usb 11-3: Manufacturer: Logitech [ 1.885841] usb 11-3: SerialNumber: 096705CA050029 [ 1.895730] input: Logitech G9 Laser Mouse as /devices/pci0000:00/0000:00:16.0/usb11/11-3/11-3:1.0/0003:046D:C048.0004/input/input4 [ 1.895861] hid-generic 0003:046D:C048.0004: input: USB HID v1.11 Mouse [Logitech G9 Laser Mouse] on usb-0000:00:16.0-3/input0 [ 1.898600] r8169 0000:03:00.0 p5p1: renamed from eth0 [ 1.904357] [drm] radeon kernel modesetting enabled. [ 1.905395] [drm] initializing kernel modesetting (TAHITI 0x1002:0x6798 0x174B:0x3001). [ 1.906513] [drm] register mmio base: 0xFEA00000 [ 1.906584] [drm] register mmio size: 262144 [ 1.906684] ATOM BIOS: Tahiti [ 1.906799] [drm] Changing default dispclk from 500Mhz to 600Mhz [ 1.906877] radeon 0000:01:00.0: VRAM: 3072M 0x0000000000000000 - 0x00000000BFFFFFFF (3072M used) [ 1.906999] radeon 0000:01:00.0: GTT: 1024M 0x00000000C0000000 - 0x00000000FFFFFFFF [ 1.907122] [drm] Detected VRAM RAM=3072M, BAR=256M [ 1.907189] [drm] RAM width 384bits DDR [ 1.907308] [TTM] Zone kernel: Available graphics memory: 4073762 kiB [ 1.907375] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 1.907444] [TTM] Initializing pool allocator [ 1.907566] [TTM] Initializing DMA pool allocator [ 1.907656] [drm] radeon: 3072M of VRAM memory ready [ 1.907722] [drm] radeon: 1024M of GTT memory ready. [ 1.907789] [drm] Loading tahiti Microcode [ 1.909383] input: Logitech G9 Laser Mouse as /devices/pci0000:00/0000:00:16.0/usb11/11-3/11-3:1.1/0003:046D:C048.0005/input/input5 [ 1.909602] hid-generic 0003:046D:C048.0005: input: USB HID v1.11 Keyboard [Logitech G9 Laser Mouse] on usb-0000:00:16.0-3/input1 [ 1.913405] [drm] Internal thermal controller with fan control [ 1.913554] [drm] probing gen 2 caps for device 1002:5a16 = 31cd02/0 [ 1.919335] [drm] radeon: dpm initialized [ 1.920620] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 1.921608] [drm] probing gen 2 caps for device 1002:5a16 = 31cd02/0 [ 1.921676] [drm] PCIE gen 2 link speeds already enabled [ 1.923696] Adding 6251516k swap on /dev/sdb2. Priority:-1 extents:1 across:6251516k SS [ 1.927579] usb 8-5: 1:1: cannot get freq at ep 0x1 [ 1.933854] [drm] PCIE GART of 1024M enabled (table at 0x0000000000277000). [ 1.934059] radeon 0000:01:00.0: WB enabled [ 1.934123] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000c0000c00 and cpu addr 0xffff880222b01c00 [ 1.934226] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x00000000c0000c04 and cpu addr 0xffff880222b01c04 [ 1.934329] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x00000000c0000c08 and cpu addr 0xffff880222b01c08 [ 1.934428] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x00000000c0000c0c and cpu addr 0xffff880222b01c0c [ 1.934536] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x00000000c0000c10 and cpu addr 0xffff880222b01c10 [ 1.935027] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90011535a18 [ 1.935126] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.935230] [drm] Driver supports precise vblank timestamp query. [ 1.935325] radeon 0000:01:00.0: irq 50 for MSI/MSI-X [ 1.935335] radeon 0000:01:00.0: radeon: using MSI. [ 1.935425] [drm] radeon: irq initialized. [ 1.942823] random: nonblocking pool is initialized [ 1.949283] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null) [ 1.950892] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 1.957693] usbcore: registered new interface driver snd-usb-audio [ 2.103963] [drm] ring test on 0 succeeded in 1 usecs [ 2.104034] [drm] ring test on 1 succeeded in 0 usecs [ 2.104102] [drm] ring test on 2 succeeded in 1 usecs [ 2.104171] [drm] ring test on 3 succeeded in 3 usecs [ 2.104238] [drm] ring test on 4 succeeded in 3 usecs [ 2.136658] usb 11-4: new full-speed USB device number 4 using ohci-pci [ 2.291531] [drm] ring test on 5 succeeded in 2 usecs [ 2.291599] [drm] UVD initialized successfully. [ 2.291948] [drm] ib test on ring 0 succeeded in 0 usecs [ 2.292028] [drm] ib test on ring 1 succeeded in 0 usecs [ 2.292129] [drm] ib test on ring 2 succeeded in 0 usecs [ 2.292204] [drm] ib test on ring 3 succeeded in 0 usecs [ 2.292279] [drm] ib test on ring 4 succeeded in 1 usecs [ 2.292915] usb 11-4: New USB device found, idVendor=046d, idProduct=c21d [ 2.292976] usb 11-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.293066] usb 11-4: Product: Gamepad F310 [ 2.293125] usb 11-4: Manufacturer: Logitech [ 2.293184] usb 11-4: SerialNumber: C15828DA [ 2.809179] Switched to clocksource tsc [ 3.304172] [drm:0xffffffffa0168358] *ERROR* Timeout setting UVD clocks! [ 3.304232] [drm:0xffffffffa0169a66] *ERROR* radeon: failed to raise UVD clocks (-110). [ 3.304322] [drm:0xffffffffa015fd38] *ERROR* radeon: failed testing IB on ring 5 (-110). [ 3.304955] [drm] Radeon Display Connectors [ 3.305016] [drm] Connector 0: [ 3.305074] [drm] DP-1 [ 3.305133] [drm] HPD5 [ 3.305192] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c [ 3.305281] [drm] Encoders: [ 3.305339] [drm] DFP1: INTERNAL_UNIPHY2 [ 3.305437] [drm] Connector 1: [ 3.305495] [drm] DP-2 [ 3.305554] [drm] HPD4 [ 3.305612] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c [ 3.305702] [drm] Encoders: [ 3.305760] [drm] DFP2: INTERNAL_UNIPHY2 [ 3.305818] [drm] Connector 2: [ 3.305876] [drm] HDMI-A-1 [ 3.305934] [drm] HPD1 [ 3.305992] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c [ 3.306082] [drm] Encoders: [ 3.306140] [drm] DFP3: INTERNAL_UNIPHY1 [ 3.306198] [drm] Connector 3: [ 3.306257] [drm] DVI-I-1 [ 3.306315] [drm] HPD3 [ 3.306373] [drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c [ 3.306467] [drm] Encoders: [ 3.306526] [drm] DFP4: INTERNAL_UNIPHY [ 3.306612] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 3.306672] [drm] Connector 4: [ 3.306731] [drm] DVI-D-1 [ 3.306790] [drm] HPD6 [ 3.306849] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c [ 3.306941] [drm] Encoders: [ 3.307002] [drm] DFP5: INTERNAL_UNIPHY1 [ 3.361400] [drm] fb mappable at 0xD0479000 [ 3.361471] [drm] vram apper at 0xD0000000 [ 3.361540] [drm] size 16384000 [ 3.361637] [drm] fb depth is 24 [ 3.361706] [drm] pitch is 10240 [ 3.361819] fbcon: radeondrmfb (fb0) is primary device [ 3.529923] [drm:0xffffffffa014c81e] *ERROR* si_restrict_performance_levels_before_switch failed [ 3.587391] Console: switching to colour frame buffer device 320x100 [ 3.593229] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 3.593246] radeon 0000:01:00.0: registered panic notifier [ 3.601898] [drm] Initialized radeon 2.40.0 20080528 for 0000:01:00.0 on minor 0 [ 4.449152] r8169 0000:03:00.0 p5p1: link down [ 4.449158] r8169 0000:03:00.0 p5p1: link down [ 5.624909] usb 8-5: 1:1: cannot get freq at ep 0x1 [ 5.629907] usb 8-5: 1:1: cannot get freq at ep 0x1 [ 5.648929] usb 8-5: 1:1: cannot get freq at ep 0x1 [ 5.653917] usb 8-5: 1:1: cannot get freq at ep 0x1 [ 5.663929] usb 8-5: 1:1: cannot get freq at ep 0x1 [ 5.668937] usb 8-5: 1:1: cannot get freq at ep 0x1 [ 5.678948] usb 8-5: 1:1: cannot get freq at ep 0x1 [ 5.683941] usb 8-5: 1:1: cannot get freq at ep 0x1 [ 5.696958] usb 8-5: 1:1: cannot get freq at ep 0x1 [ 5.701957] usb 8-5: 1:1: cannot get freq at ep 0x1 [ 6.794060] r8169 0000:03:00.0 p5p1: link up [ 11.835752] Adjusting tsc more than 11% (4093752 vs 3962092) [ 15.661950] systemd-journald[150]: Failed to read ACL on /var/log/journal/a6480be84a18404091168ea691ea4138/user-1000.journal, ignoring: Operation not supported [ 16.216614] usb 8-5: 1:1: cannot get freq at ep 0x1 [ 16.221621] usb 8-5: 1:1: cannot get freq at ep 0x1 [ 16.230620] usb 8-5: 1:1: cannot get freq at ep 0x1 [ 16.235629] usb 8-5: 1:1: cannot get freq at ep 0x1 [ 16.244636] usb 8-5: 1:1: cannot get freq at ep 0x1 [ 16.249638] usb 8-5: 1:1: cannot get freq at ep 0x1 [ 16.258639] usb 8-5: 1:1: cannot get freq at ep 0x1 [ 16.263644] usb 8-5: 1:1: cannot get freq at ep 0x1 [ 16.274655] usb 8-5: 1:1: cannot get freq at ep 0x1 [ 16.279652] usb 8-5: 1:1: cannot get freq at ep 0x1 [ 169.197490] usb 8-5: 1:1: cannot get freq at ep 0x1 [ 169.202489] usb 8-5: 1:1: cannot get freq at ep 0x1 [ 502.969869] usb 8-5: 1:1: cannot get freq at ep 0x1 [ 502.974868] usb 8-5: 1:1: cannot get freq at ep 0x1