[ 73.936] This is a pre-release version of the X server from The X.Org Foundation. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the "xorg" product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the X.Org Foundation git repository. See http://wiki.x.org/wiki/GitPage for git access instructions. [ 73.936] X.Org X Server 1.16.99.901 (1.17.0 RC 1) Release Date: 2014-10-28 [ 73.936] X Protocol Version 11, Revision 0 [ 73.936] Build Operating System: Linux 3.8.13.28-3-ARCH armv7l [ 73.937] Current Operating System: Linux u3 3.8.13.28-3-ARCH #6 SMP PREEMPT Fri Dec 26 04:12:25 EST 2014 armv7l [ 73.937] Kernel command line: console=tty1 console=ttySAC1,115200 mem=2047M console=ttySAC1,115200 drm_kms_helper.edid_firmware=edid/1920x1080.bin drm.debug=1 root=/dev/mmcblk0p1 rw rootwait video= [ 73.937] Build Date: 26 December 2014 10:44:33PM [ 73.937] [ 73.937] Current version of pixman: 0.32.6 [ 73.937] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 73.937] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 73.938] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 27 00:17:54 2014 [ 73.941] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 73.941] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 73.946] (==) No Layout section. Using the first Screen section. [ 73.946] (**) |-->Screen "Mali-Screen" (0) [ 73.946] (**) | |-->Monitor "" [ 73.952] (**) | |-->Device "Mali-Fbdev" [ 73.952] (==) No monitor specified for screen "Mali-Screen". Using a default monitor configuration. [ 73.952] (==) Automatically adding devices [ 73.952] (==) Automatically enabling devices [ 73.952] (==) Automatically adding GPU devices [ 73.963] (WW) The directory "/usr/share/fonts/Type1/" does not exist. [ 73.963] Entry deleted from font path. [ 73.965] (==) FontPath set to: /usr/share/fonts/misc/, /usr/share/fonts/TTF/, /usr/share/fonts/OTF/, /usr/share/fonts/100dpi/, /usr/share/fonts/75dpi/ [ 73.965] (==) ModulePath set to "/usr/lib/xorg/modules" [ 73.965] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 73.966] (II) Loader magic: 0x1cfeb8 [ 73.966] (II) Module ABI versions: [ 73.966] X.Org ANSI C Emulation: 0.4 [ 73.966] X.Org Video Driver: 19.0 [ 73.966] X.Org XInput driver : 21.0 [ 73.966] X.Org Server Extension : 9.0 [ 73.971] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1 [ 73.971] (II) xfree86: Adding drm device (/dev/dri/card0) [ 73.973] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0 [ 73.973] (II) no primary bus or device found [ 73.973] falling back to /sys/devices/platform/exynos-drm/drm/card0 [ 73.975] (II) LoadModule: "glx" [ 74.001] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 74.068] (II) Module glx: vendor="X.Org Foundation" [ 74.068] compiled for 1.16.99.901, module version = 1.0.0 [ 74.068] ABI class: X.Org Server Extension, version 9.0 [ 74.068] (==) AIGLX enabled [ 74.068] (II) LoadModule: "armsoc" [ 74.068] (II) Loading /usr/lib/xorg/modules/drivers/armsoc_drv.so [ 74.073] (II) Module armsoc: vendor="X.Org Foundation" [ 74.073] compiled for 1.16.99.901, module version = 1.0.0 [ 74.073] Module class: X.Org Video Driver [ 74.073] ABI class: X.Org Video Driver, version 19.0 [ 74.073] (II) ARMSOC: Driver for ARM Mali compatible chipsets [ 74.073] (++) using VT number 2 [ 74.073] (--) controlling tty is VT number 2, auto-enabling KeepTty [ 74.073] (II) systemd-logind: releasing fd for 226:0 [ 74.074] (WW) Falling back to old probe method for armsoc [ 74.074] (II) Opening driver [exynos], bus_id [NULL] [ 74.074] (II) Opened DRM [ 74.075] (II) DeviceName is [/dev/dri/card0] [ 74.075] (II) bus_id is [] [ 74.075] (II) DriverName is [exynos] [ 74.075] (II) version is [1.0.0] [ 74.075] (II) Screen:0, CRTC:-1 [ 74.075] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support [ 74.075] (II) ARMSOC(0): Creating default Display subsection in Screen section "Mali-Screen" for depth/fbbpp 24/32 [ 74.075] (**) ARMSOC(0): Depth 24, (--) framebuffer bpp 32 [ 74.075] (==) ARMSOC(0): RGB weight 888 [ 74.075] (==) ARMSOC(0): Using gamma correction (1.0, 1.0, 1.0) [ 74.075] (==) ARMSOC(0): Default visual is TrueColor [ 74.075] (II) Opening driver [exynos], bus_id [NULL] [ 74.075] (II) Opened DRM [ 74.075] (II) DeviceName is [/dev/dri/card0] [ 74.075] (II) bus_id is [] [ 74.076] (II) DriverName is [exynos] [ 74.076] (II) version is [1.0.0] [ 74.076] (II) ARMSOC(0): Chipset: Mali [ 74.076] (**) ARMSOC(0): Option "DriverName" "exynos" [ 74.076] (II) ARMSOC(0): Buffer Flipping is Enabled [ 74.076] (II) ARMSOC(0): Setting the video modes ... [ 74.076] (II) ARMSOC(0): Adding all CRTCs [ 74.076] (II) ARMSOC(0): Got CRTC: 0 (id: 4) [ 74.076] (II) ARMSOC(0): Got CRTC: 1 (id: 10) [ 74.076] (II) ARMSOC(0): Got CRTC: 2 (id: 12) [ 74.081] (II) ARMSOC(0): Output HDMI-1 has no monitor section [ 74.091] (II) ARMSOC(0): EDID for output HDMI-1 [ 74.092] (II) ARMSOC(0): Manufacturer: LNX Model: 0 Serial#: 0 [ 74.092] (II) ARMSOC(0): Year: 2012 Week: 5 [ 74.092] (II) ARMSOC(0): EDID Version: 1.3 [ 74.092] (II) ARMSOC(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V [ 74.092] (II) ARMSOC(0): Sync: Separate CompositeSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen [ 74.092] (II) ARMSOC(0): Max Image Size [cm]: horiz.: 50 vert.: 28 [ 74.092] (II) ARMSOC(0): Gamma: 2.20 [ 74.092] (II) ARMSOC(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display [ 74.092] (II) ARMSOC(0): First detailed timing is preferred mode [ 74.092] (II) ARMSOC(0): redX: 0.642 redY: 0.349 greenX: 0.292 greenY: 0.596 [ 74.092] (II) ARMSOC(0): blueX: 0.147 blueY: 0.125 whiteX: 0.312 whiteY: 0.328 [ 74.092] (II) ARMSOC(0): Manufacturer's mask: 0 [ 74.092] (II) ARMSOC(0): Supported standard timings: [ 74.092] (II) ARMSOC(0): #0: hsize: 1920 vsize 1080 refresh: 60 vid: 49361 [ 74.092] (II) ARMSOC(0): Supported detailed timing: [ 74.092] (II) ARMSOC(0): clock: 148.5 MHz Image Size: 500 x 281 mm [ 74.092] (II) ARMSOC(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 [ 74.092] (II) ARMSOC(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 [ 74.092] (II) ARMSOC(0): Serial No: Linux #0 [ 74.092] (II) ARMSOC(0): Ranges: V min: 59 V max: 61 Hz, H min: 66 H max: 68 kHz, PixClock max 155 MHz [ 74.092] (II) ARMSOC(0): Monitor name: Linux FHD [ 74.092] (II) ARMSOC(0): EDID (in hex): [ 74.092] (II) ARMSOC(0): 00ffffffffffff0031d8000000000000 [ 74.092] (II) ARMSOC(0): 051601036d321c78ea5ec0a4594a9825 [ 74.092] (II) ARMSOC(0): 205054000000d1c00101010101010101 [ 74.092] (II) ARMSOC(0): 010101010101023a801871382d40582c [ 74.092] (II) ARMSOC(0): 4500f4191100001e000000ff004c696e [ 74.092] (II) ARMSOC(0): 75782023300a20202020000000fd003b [ 74.092] (II) ARMSOC(0): 3d42440f000a202020202020000000fc [ 74.092] (II) ARMSOC(0): 004c696e7578204648440a2020200005 [ 74.092] (II) ARMSOC(0): EDID vendor "LNX", prod id 0 [ 74.097] (II) ARMSOC(0): Using EDID range info for horizontal sync [ 74.097] (II) ARMSOC(0): Using EDID range info for vertical refresh [ 74.097] (II) ARMSOC(0): Printing DDC gathered Modelines: [ 74.097] (II) ARMSOC(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP) [ 74.097] (II) ARMSOC(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e) [ 74.098] (II) ARMSOC(0): Printing probed modes for output HDMI-1 [ 74.098] (II) ARMSOC(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP) [ 74.098] (II) ARMSOC(0): Output HDMI-1 connected [ 74.098] (II) ARMSOC(0): Using exact sizes for initial modes [ 74.098] (II) ARMSOC(0): Output HDMI-1 using initial mode 1920x1080 [ 74.098] (II) ARMSOC(0): Got KMS resources [ 74.098] (**) ARMSOC(0): Display dimensions: (500, 280) mm [ 74.098] (**) ARMSOC(0): DPI set to (97, 97) [ 74.098] (II) Loading sub module "dri2" [ 74.098] (II) LoadModule: "dri2" [ 74.098] (II) Module "dri2" already built-in [ 74.098] (II) Loading sub module "exa" [ 74.098] (II) LoadModule: "exa" [ 74.098] (II) Loading /usr/lib/xorg/modules/libexa.so [ 74.103] (II) Module exa: vendor="X.Org Foundation" [ 74.103] compiled for 1.16.99.901, module version = 2.6.0 [ 74.103] ABI class: X.Org Video Driver, version 19.0 [ 74.103] (II) Loading sub module "fb" [ 74.103] (II) LoadModule: "fb" [ 74.104] (II) Loading /usr/lib/xorg/modules/libfb.so [ 74.109] (II) Module fb: vendor="X.Org Foundation" [ 74.109] compiled for 1.16.99.901, module version = 1.0.0 [ 74.109] ABI class: X.Org ANSI C Emulation, version 0.4 [ 74.110] (--) Depth 24 pixmap format is 32 bpp [ 74.149] (II) ARMSOC(0): Initialized a 24 depth visual for 32bpp [ 74.164] (II) ARMSOC(0): Soft EXA mode [ 74.164] (II) EXA(0): Driver allocated offscreen pixmaps [ 74.164] (II) EXA(0): Driver registered support for the following operations: [ 74.164] (II) Solid [ 74.164] (II) Copy [ 74.164] (II) Composite (RENDER acceleration) [ 74.164] (II) ARMSOC(0): Setting swap chain size: 2 [ 74.164] (II) ARMSOC(0): [DRI2] Setup complete [ 74.164] (II) ARMSOC(0): [DRI2] DRI driver: armsoc [ 74.164] (==) ARMSOC(0): Backing store enabled [ 74.164] (==) ARMSOC(0): Silken mouse enabled [ 74.169] (II) ARMSOC(0): HW cursor init() [ 74.169] (II) ARMSOC(0): HW cursor initialized [ 74.169] (II) ARMSOC(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 74.173] (==) ARMSOC(0): DPMS enabled [ 74.174] (--) RandR disabled [ 74.197] (EE) AIGLX error: dlopen of /usr/lib/xorg/modules/dri/armsoc_dri.so failed (/usr/lib/xorg/modules/dri/armsoc_dri.so: cannot open shared object file: No such file or directory) [ 74.197] (EE) AIGLX: reverting to software rendering [ 74.203] (EE) AIGLX error: dlopen of /usr/lib/xorg/modules/dri/swrast_dri.so failed (libdrm_nouveau.so.2: cannot open shared object file: No such file or directory) [ 74.203] (EE) GLX: could not load software renderer [ 74.203] (II) GLX: no usable GL providers found for screen 0 [ 74.203] (II) ARMSOC(0): Setting screen physical size to 508 x 285 [ 74.710] (II) config/udev: Adding input device gpio-keys (/dev/input/event4) [ 74.710] (**) gpio-keys: Applying InputClass "evdev keyboard catchall" [ 74.710] (II) LoadModule: "evdev" [ 74.710] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 74.720] (II) Module evdev: vendor="X.Org Foundation" [ 74.721] compiled for 1.16.2, module version = 2.9.1 [ 74.721] Module class: X.Org XInput Driver [ 74.721] ABI class: X.Org XInput driver, version 21.0 [ 74.722] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 11 paused 0 [ 74.722] (II) Using input driver 'evdev' for 'gpio-keys' [ 74.722] (**) gpio-keys: always reports core events [ 74.722] (**) evdev: gpio-keys: Device: "/dev/input/event4" [ 74.723] (--) evdev: gpio-keys: Vendor 0x1 Product 0x1 [ 74.723] (--) evdev: gpio-keys: Found keys [ 74.723] (II) evdev: gpio-keys: Configuring as keyboard [ 74.723] (**) Option "config_info" "udev:/sys/devices/platform/gpio-keys.0/input/input4/event4" [ 74.723] (II) XINPUT: Adding extended input device "gpio-keys" (type: KEYBOARD, id 6) [ 74.723] (**) Option "xkb_rules" "evdev" [ 74.723] (**) Option "xkb_model" "pc104" [ 74.723] (**) Option "xkb_layout" "us" [ 74.782] (II) config/udev: Adding input device C-Media Electronics Inc. USB PnP Sound Device (/dev/input/event0) [ 74.782] (**) C-Media Electronics Inc. USB PnP Sound Device: Applying InputClass "evdev keyboard catchall" [ 74.783] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 12 paused 0 [ 74.783] (II) Using input driver 'evdev' for 'C-Media Electronics Inc. USB PnP Sound Device' [ 74.783] (**) C-Media Electronics Inc. USB PnP Sound Device: always reports core events [ 74.783] (**) evdev: C-Media Electronics Inc. USB PnP Sound Device: Device: "/dev/input/event0" [ 74.783] (--) evdev: C-Media Electronics Inc. USB PnP Sound Device: Vendor 0xd8c Product 0x13c [ 74.783] (--) evdev: C-Media Electronics Inc. USB PnP Sound Device: Found 1 mouse buttons [ 74.783] (--) evdev: C-Media Electronics Inc. USB PnP Sound Device: Found keys [ 74.783] (II) evdev: C-Media Electronics Inc. USB PnP Sound Device: Forcing relative x/y axes to exist. [ 74.783] (II) evdev: C-Media Electronics Inc. USB PnP Sound Device: Configuring as mouse [ 74.783] (II) evdev: C-Media Electronics Inc. USB PnP Sound Device: Configuring as keyboard [ 74.784] (**) evdev: C-Media Electronics Inc. USB PnP Sound Device: YAxisMapping: buttons 4 and 5 [ 74.784] (**) evdev: C-Media Electronics Inc. USB PnP Sound Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 74.784] (**) Option "config_info" "udev:/sys/devices/platform/s5p-ehci/usb1/1-3/1-3.1/1-3.1.2/1-3.1.2:1.3/input/input0/event0" [ 74.784] (II) XINPUT: Adding extended input device "C-Media Electronics Inc. USB PnP Sound Device" (type: KEYBOARD, id 7) [ 74.784] (**) Option "xkb_rules" "evdev" [ 74.784] (**) Option "xkb_model" "pc104" [ 74.784] (**) Option "xkb_layout" "us" [ 74.786] (II) config/udev: Adding input device HID 05f3:0007 (/dev/input/event1) [ 74.786] (**) HID 05f3:0007: Applying InputClass "evdev keyboard catchall" [ 74.787] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 13 paused 0 [ 74.787] (II) Using input driver 'evdev' for 'HID 05f3:0007' [ 74.787] (**) HID 05f3:0007: always reports core events [ 74.787] (**) evdev: HID 05f3:0007: Device: "/dev/input/event1" [ 74.787] (--) evdev: HID 05f3:0007: Vendor 0x5f3 Product 0x7 [ 74.787] (--) evdev: HID 05f3:0007: Found keys [ 74.787] (II) evdev: HID 05f3:0007: Configuring as keyboard [ 74.787] (**) Option "config_info" "udev:/sys/devices/platform/s5p-ehci/usb1/1-3/1-3.1/1-3.1.4/1-3.1.4.2/1-3.1.4.2:1.0/input/input1/event1" [ 74.787] (II) XINPUT: Adding extended input device "HID 05f3:0007" (type: KEYBOARD, id 8) [ 74.788] (**) Option "xkb_rules" "evdev" [ 74.788] (**) Option "xkb_model" "pc104" [ 74.788] (**) Option "xkb_layout" "us" [ 74.789] (II) config/udev: Adding input device HID 05f3:0007 (/dev/input/event2) [ 74.789] (**) HID 05f3:0007: Applying InputClass "evdev keyboard catchall" [ 74.791] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 14 paused 0 [ 74.791] (II) Using input driver 'evdev' for 'HID 05f3:0007' [ 74.791] (**) HID 05f3:0007: always reports core events [ 74.791] (**) evdev: HID 05f3:0007: Device: "/dev/input/event2" [ 74.791] (--) evdev: HID 05f3:0007: Vendor 0x5f3 Product 0x7 [ 74.791] (--) evdev: HID 05f3:0007: Found keys [ 74.791] (II) evdev: HID 05f3:0007: Configuring as keyboard [ 74.791] (**) Option "config_info" "udev:/sys/devices/platform/s5p-ehci/usb1/1-3/1-3.1/1-3.1.4/1-3.1.4.2/1-3.1.4.2:1.1/input/input2/event2" [ 74.791] (II) XINPUT: Adding extended input device "HID 05f3:0007" (type: KEYBOARD, id 9) [ 74.791] (**) Option "xkb_rules" "evdev" [ 74.791] (**) Option "xkb_model" "pc104" [ 74.791] (**) Option "xkb_layout" "us" [ 74.793] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event3) [ 74.793] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 74.794] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 15 paused 0 [ 74.794] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse' [ 74.794] (**) Logitech USB Optical Mouse: always reports core events [ 74.794] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event3" [ 74.795] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc064 [ 74.795] (--) evdev: Logitech USB Optical Mouse: Found 12 mouse buttons [ 74.795] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s) [ 74.795] (--) evdev: Logitech USB Optical Mouse: Found relative axes [ 74.795] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes [ 74.795] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse [ 74.795] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support [ 74.795] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 74.795] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 74.795] (**) Option "config_info" "udev:/sys/devices/platform/s5p-ehci/usb1/1-3/1-3.1/1-3.1.4/1-3.1.4.3/1-3.1.4.3:1.0/input/input3/event3" [ 74.795] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 10) [ 74.795] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes. [ 74.795] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 74.796] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0 [ 74.796] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000 [ 74.796] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4 [ 74.797] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0) [ 74.797] (II) No input driver specified, ignoring this device. [ 74.797] (II) This device may have been added with another device file. [ 111.062] (II) evdev: Logitech USB Optical Mouse: Close [ 111.062] (II) UnloadModule: "evdev" [ 111.062] (II) systemd-logind: releasing fd for 13:67 [ 111.115] (II) evdev: HID 05f3:0007: Close [ 111.115] (II) UnloadModule: "evdev" [ 111.115] (II) systemd-logind: releasing fd for 13:66 [ 111.165] (II) evdev: HID 05f3:0007: Close [ 111.165] (II) UnloadModule: "evdev" [ 111.165] (II) systemd-logind: releasing fd for 13:65 [ 111.215] (II) evdev: C-Media Electronics Inc. USB PnP Sound Device: Close [ 111.215] (II) UnloadModule: "evdev" [ 111.215] (II) systemd-logind: releasing fd for 13:64 [ 111.265] (II) evdev: gpio-keys: Close [ 111.265] (II) UnloadModule: "evdev" [ 111.265] (II) systemd-logind: releasing fd for 13:68 [ 111.558] (II) Server terminated successfully (0). Closing log file.