$ grep . /sys/class/drm/card0/device/hwmon/hwmon*/pwm* /sys/class/drm/card0/device/hwmon/hwmon0/pwm1:35 /sys/class/drm/card0/device/hwmon/hwmon0/pwm1_enable:2 /sys/class/drm/card0/device/hwmon/hwmon0/pwm1_max:100 /sys/class/drm/card0/device/hwmon/hwmon0/pwm1_min:35 --------------------------------------------------------------------------------------------------------------------------------------------------------- $ dmesg [ 0.000000] CPU0 microcode updated early to revision 0xa0b, date = 2010-09-28 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.18.1-1-desktop (geeko@buildhost) (gcc version 4.8.3 20141208 [gcc-4_8-branch revision 218481] (SUSE Linux) ) #1 SMP PREEMPT Wed Dec 17 18:20:30 UTC 2014 (5f2f35e) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.18.1-1-desktop root=UUID=ac7c724e-3542-4e40-a173-d5aaef2ea0c7 resume=/dev/disk/by-id/ata-WDC_WD30EZRX-00D8PB0_WD-WCC4N1HT9UK0-part3 splash=silent quiet showopts [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000977ff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000097800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffaffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bffb0000-0x00000000bffbffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bffc0000-0x00000000bffeffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bfff0000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./P43DE, BIOS P1.40 03/30/2009 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask E00000000 write-back [ 0.000000] 1 base 200000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbffb0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000091000] 91000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x02212000, 0x02212fff] PGTABLE [ 0.000000] BRK [0x02213000, 0x02213fff] PGTABLE [ 0.000000] BRK [0x02214000, 0x02214fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x23fe00000-0x23fffffff] [ 0.000000] [mem 0x23fe00000-0x23fffffff] page 2M [ 0.000000] BRK [0x02215000, 0x02215fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x23c000000-0x23fdfffff] [ 0.000000] [mem 0x23c000000-0x23fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff] [ 0.000000] [mem 0x200000000-0x23bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbffaffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xbfdfffff] page 2M [ 0.000000] [mem 0xbfe00000-0xbffaffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M [ 0.000000] BRK [0x02216000, 0x02216fff] PGTABLE [ 0.000000] BRK [0x02217000, 0x02217fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x36fe0000-0x377e7fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F9C50 000014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 0x00000000BFFB0000 00003C (v01 033009 RSDT2034 20090330 MSFT 00000097) [ 0.000000] ACPI: FACP 0x00000000BFFB0200 000084 (v01 A M I OEMFACP 12000601 MSFT 00000097) [ 0.000000] ACPI: DSDT 0x00000000BFFB0440 00562C (v01 AS170 AS170131 00000131 INTL 20051117) [ 0.000000] ACPI: FACS 0x00000000BFFC0000 000040 [ 0.000000] ACPI: APIC 0x00000000BFFB0390 00006C (v01 033009 APIC2034 20090330 MSFT 00000097) [ 0.000000] ACPI: MCFG 0x00000000BFFB0400 00003C (v01 033009 OEMMCFG 20090330 MSFT 00000097) [ 0.000000] ACPI: OEMB 0x00000000BFFC0040 000073 (v01 033009 OEMB2034 20090330 MSFT 00000097) [ 0.000000] ACPI: AAFT 0x00000000BFFB8440 000027 (v01 033009 OEMAAFT 20090330 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000BFFB8470 000038 (v01 033009 OEMHPET 20090330 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x23ffe7000-0x23fffafff] [ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880237600000-ffff88023e5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x23fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x00096fff] [ 0.000000] node 0: [mem 0x00100000-0xbffaffff] [ 0.000000] node 0: [mem 0x100000000-0x23fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x23fffffff] [ 0.000000] On node 0 totalpages: 2096966 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3990 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10695 pages used for memmap [ 0.000000] DMA32 zone: 782256 pages, LIFO batch:31 [ 0.000000] Normal zone: 17920 pages used for memmap [ 0.000000] Normal zone: 1310720 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00097000-0x00097fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00098000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbffb0000-0xbffbffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbffc0000-0xbffeffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfff0000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88023fc00000 s79872 r8192 d30720 u524288 [ 0.000000] pcpu-alloc: s79872 r8192 d30720 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2068274 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.18.1-1-desktop root=UUID=ac7c724e-3542-4e40-a173-d5aaef2ea0c7 resume=/dev/disk/by-id/ata-WDC_WD30EZRX-00D8PB0_WD-WCC4N1HT9UK0-part3 splash=silent quiet showopts [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240 using standard form [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Memory: 8179476K/8387864K available (6545K kernel code, 1047K rwdata, 4896K rodata, 1540K init, 1544K bss, 208388K reserved) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS:33024 nr_irqs:456 0 [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-3. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 33554432 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2671.092 MHz processor [ 0.001012] Calibrating delay loop (skipped), value calculated using timer frequency.. 5342.18 BogoMIPS (lpj=2671092) [ 0.001015] pid_max: default: 32768 minimum: 301 [ 0.001025] ACPI: Core revision 20140926 [ 0.006760] ACPI: All ACPI Tables successfully acquired [ 0.007041] Security Framework initialized [ 0.007058] AppArmor: AppArmor initialized [ 0.007659] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.011029] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.012443] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.012457] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.012789] Initializing cgroup subsys memory [ 0.012797] Initializing cgroup subsys devices [ 0.012802] Initializing cgroup subsys freezer [ 0.012805] Initializing cgroup subsys net_cls [ 0.012809] Initializing cgroup subsys blkio [ 0.012812] Initializing cgroup subsys perf_event [ 0.012815] Initializing cgroup subsys net_prio [ 0.012818] Initializing cgroup subsys hugetlb [ 0.012842] CPU: Physical Processor ID: 0 [ 0.012843] CPU: Processor Core ID: 0 [ 0.012845] mce: CPU supports 6 MCE banks [ 0.012852] CPU0: Thermal monitoring enabled (TM1) [ 0.012859] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.012941] Freeing SMP alternatives memory: 24K (ffffffff82088000 - ffffffff8208e000) [ 0.013969] ftrace: allocating 24968 entries in 98 pages [ 0.019447] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.029753] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz (fam: 06, model: 17, stepping: 0a) [ 0.030000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. [ 0.030000] ... version: 2 [ 0.030000] ... bit width: 40 [ 0.030000] ... generic registers: 2 [ 0.030000] ... value mask: 000000ffffffffff [ 0.030000] ... max period: 000000007fffffff [ 0.030000] ... fixed-purpose events: 3 [ 0.030000] ... event mask: 0000000700000003 [ 0.040130] x86: Booting SMP configuration: [ 0.040133] .... node #0, CPUs: #1 [ 0.002000] CPU1 microcode updated early to revision 0xa0b, date = 2010-09-28 [ 0.054090] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.056128] #2 [ 0.002000] CPU2 microcode updated early to revision 0xa0b, date = 2010-09-28 [ 0.075115] #3 [ 0.002000] CPU3 microcode updated early to revision 0xa0b, date = 2010-09-28 [ 0.092013] x86: Booted up 1 node, 4 CPUs [ 0.092017] smpboot: Total of 4 processors activated (21368.73 BogoMIPS) [ 0.093163] devtmpfs: initialized [ 0.099489] PM: Registering ACPI NVS region [mem 0xbffc0000-0xbffeffff] (196608 bytes) [ 0.100571] pinctrl core: initialized pinctrl subsystem [ 0.100571] RTC time: 16:13:01, date: 12/30/14 [ 0.100571] NET: Registered protocol family 16 [ 0.103004] cpuidle: using governor ladder [ 0.106003] cpuidle: using governor menu [ 0.106051] ACPI: bus type PCI registered [ 0.106053] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.106130] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.106132] PCI: not using MMCONFIG [ 0.106134] PCI: Using configuration type 1 for base access [ 0.110080] ACPI: Added _OSI(Module Device) [ 0.110080] ACPI: Added _OSI(Processor Device) [ 0.110080] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.110080] ACPI: Added _OSI(Processor Aggregator Device) [ 0.112322] ACPI: Executed 1 blocks of module-level executable AML code [ 0.115112] ACPI: Interpreter enabled [ 0.115122] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580) [ 0.115126] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140926/hwxface-580) [ 0.115136] ACPI: (supports S0 S1 S4 S5) [ 0.115138] ACPI: Using IOAPIC for interrupt routing [ 0.115164] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.116787] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.117160] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.124755] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.124761] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.125010] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug] [ 0.125240] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability] [ 0.125649] PCI host bridge to bus 0000:00 [ 0.125652] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.125654] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.125656] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.125658] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.125660] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] [ 0.125662] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff] [ 0.125664] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff] [ 0.125672] pci 0000:00:00.0: [8086:2e20] type 00 class 0x060000 [ 0.125691] DMAR: Forcing write-buffer flush capability [ 0.125692] DMAR: Disabling IOMMU for graphics on this chipset [ 0.125777] pci 0000:00:01.0: [8086:2e21] type 01 class 0x060400 [ 0.125811] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.125860] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.125924] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300 [ 0.125959] pci 0000:00:1a.0: reg 0x20: [io 0x9400-0x941f] [ 0.126059] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.126108] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300 [ 0.126144] pci 0000:00:1a.1: reg 0x20: [io 0x9480-0x949f] [ 0.126236] pci 0000:00:1a.1: System wakeup disabled by ACPI [ 0.126283] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300 [ 0.126318] pci 0000:00:1a.2: reg 0x20: [io 0x9800-0x981f] [ 0.126411] pci 0000:00:1a.2: System wakeup disabled by ACPI [ 0.126465] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320 [ 0.126483] pci 0000:00:1a.7: reg 0x10: [mem 0xf9dff400-0xf9dff7ff] [ 0.126561] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.126613] pci 0000:00:1a.7: System wakeup disabled by ACPI [ 0.126661] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300 [ 0.126676] pci 0000:00:1b.0: reg 0x10: [mem 0xf9df8000-0xf9dfbfff 64bit] [ 0.126738] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.126824] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400 [ 0.126889] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.126939] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.126985] pci 0000:00:1c.1: [8086:3a42] type 01 class 0x060400 [ 0.127053] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.127103] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.127151] pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400 [ 0.127214] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.127265] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 0.127312] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300 [ 0.127347] pci 0000:00:1d.0: reg 0x20: [io 0x9880-0x989f] [ 0.127440] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.127487] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300 [ 0.127522] pci 0000:00:1d.1: reg 0x20: [io 0x9c00-0x9c1f] [ 0.127614] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.127660] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300 [ 0.127695] pci 0000:00:1d.2: reg 0x20: [io 0xa000-0xa01f] [ 0.127788] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.127842] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320 [ 0.127860] pci 0000:00:1d.7: reg 0x10: [mem 0xf9dff800-0xf9dffbff] [ 0.127939] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.127988] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.128037] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.128116] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.128164] pci 0000:00:1f.0: [8086:3a18] type 00 class 0x060100 [ 0.128331] pci 0000:00:1f.2: [8086:3a20] type 00 class 0x01018f [ 0.128344] pci 0000:00:1f.2: reg 0x10: [io 0xac00-0xac07] [ 0.128350] pci 0000:00:1f.2: reg 0x14: [io 0xa880-0xa883] [ 0.128357] pci 0000:00:1f.2: reg 0x18: [io 0xa800-0xa807] [ 0.128363] pci 0000:00:1f.2: reg 0x1c: [io 0xa480-0xa483] [ 0.128370] pci 0000:00:1f.2: reg 0x20: [io 0xa400-0xa40f] [ 0.128377] pci 0000:00:1f.2: reg 0x24: [io 0xa080-0xa08f] [ 0.128484] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500 [ 0.128496] pci 0000:00:1f.3: reg 0x10: [mem 0xf9dffc00-0xf9dffcff 64bit] [ 0.128513] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] [ 0.128605] pci 0000:00:1f.5: [8086:3a26] type 00 class 0x010185 [ 0.128618] pci 0000:00:1f.5: reg 0x10: [io 0xbc00-0xbc07] [ 0.128625] pci 0000:00:1f.5: reg 0x14: [io 0xb880-0xb883] [ 0.128631] pci 0000:00:1f.5: reg 0x18: [io 0xb800-0xb807] [ 0.128638] pci 0000:00:1f.5: reg 0x1c: [io 0xb480-0xb483] [ 0.128644] pci 0000:00:1f.5: reg 0x20: [io 0xb400-0xb40f] [ 0.128651] pci 0000:00:1f.5: reg 0x24: [io 0xb080-0xb08f] [ 0.128796] pci 0000:05:00.0: [10de:0622] type 00 class 0x030000 [ 0.128806] pci 0000:05:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff] [ 0.128815] pci 0000:05:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.128824] pci 0000:05:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff 64bit] [ 0.128831] pci 0000:05:00.0: reg 0x24: [io 0xec00-0xec7f] [ 0.128837] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 0.128926] pci 0000:00:01.0: PCI bridge to [bus 05] [ 0.128929] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.128932] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfebfffff] [ 0.128935] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.128986] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.128994] pci 0000:00:1c.0: bridge window [mem 0xcff00000-0xcfffffff 64bit pref] [ 0.129075] pci 0000:03:00.0: [1106:0415] type 00 class 0x010185 [ 0.129092] pci 0000:03:00.0: reg 0x10: [io 0xdc00-0xdc07] [ 0.129103] pci 0000:03:00.0: reg 0x14: [io 0xd880-0xd883] [ 0.129114] pci 0000:03:00.0: reg 0x18: [io 0xd800-0xd807] [ 0.129125] pci 0000:03:00.0: reg 0x1c: [io 0xd480-0xd483] [ 0.129136] pci 0000:03:00.0: reg 0x20: [io 0xd400-0xd40f] [ 0.129156] pci 0000:03:00.0: reg 0x30: [mem 0xf9ff0000-0xf9ffffff pref] [ 0.129216] pci 0000:03:00.0: supports D1 D2 [ 0.129218] pci 0000:03:00.0: PME# supported from D1 D2 D3hot [ 0.131013] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.131017] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.131020] pci 0000:00:1c.1: bridge window [mem 0xf9f00000-0xf9ffffff] [ 0.131089] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.131106] pci 0000:02:00.0: reg 0x10: [io 0xc800-0xc8ff] [ 0.131131] pci 0000:02:00.0: reg 0x18: [mem 0xcfeff000-0xcfefffff 64bit pref] [ 0.131147] pci 0000:02:00.0: reg 0x20: [mem 0xcfef8000-0xcfefbfff 64bit pref] [ 0.131158] pci 0000:02:00.0: reg 0x30: [mem 0xf9ee0000-0xf9efffff pref] [ 0.131232] pci 0000:02:00.0: supports D1 D2 [ 0.131234] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.133012] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.133016] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff] [ 0.133019] pci 0000:00:1c.5: bridge window [mem 0xf9e00000-0xf9efffff] [ 0.133024] pci 0000:00:1c.5: bridge window [mem 0xcfe00000-0xcfefffff 64bit pref] [ 0.133091] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode) [ 0.133099] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.133101] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.133103] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.133105] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.133107] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode) [ 0.133109] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode) [ 0.134237] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) [ 0.134315] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) [ 0.134389] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15) [ 0.134465] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15) [ 0.134541] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. [ 0.134618] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15) [ 0.134693] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15) [ 0.134770] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15) [ 0.134829] ACPI: Enabled 1 GPEs in block 00 to 3F [ 0.134898] vgaarb: setting as boot device: PCI:0000:05:00.0 [ 0.134898] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.134898] vgaarb: loaded [ 0.134898] vgaarb: bridge control possible 0000:05:00.0 [ 0.135043] SCSI subsystem initialized [ 0.135062] libata version 3.00 loaded. [ 0.135062] ACPI: bus type USB registered [ 0.135062] usbcore: registered new interface driver usbfs [ 0.135062] usbcore: registered new interface driver hub [ 0.135076] usbcore: registered new device driver usb [ 0.135132] PCI: Using ACPI for IRQ routing [ 0.140133] PCI: pci_cache_line_size set to 64 bytes [ 0.140180] e820: reserve RAM buffer [mem 0x00097800-0x0009ffff] [ 0.140182] e820: reserve RAM buffer [mem 0xbffb0000-0xbfffffff] [ 0.140309] NetLabel: Initializing [ 0.140310] NetLabel: domain hash size = 128 [ 0.140311] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.140327] NetLabel: unlabeled traffic allowed by default [ 0.140360] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.140364] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.140368] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.142030] Switched to clocksource hpet [ 0.149753] AppArmor: AppArmor Filesystem Enabled [ 0.149797] pnp: PnP ACPI init [ 0.149910] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved [ 0.149913] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.149917] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.150016] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.150474] pnp 00:02: [dma 2] [ 0.150519] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.150834] system 00:03: [io 0x0280-0x028f] has been reserved [ 0.150837] system 00:03: [io 0x0290-0x029f] has been reserved [ 0.150840] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.151065] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.151068] system 00:04: [io 0x0800-0x087f] could not be reserved [ 0.151070] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.151073] system 00:04: [io 0x0900-0x090f] has been reserved [ 0.151076] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.151078] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.151080] system 00:04: [mem 0xfed40000-0xfed8ffff] has been reserved [ 0.151083] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.151212] system 00:05: [mem 0xffc00000-0xffefffff] has been reserved [ 0.151215] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.151366] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.151369] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.151371] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.151639] pnp 00:07: [dma 0 disabled] [ 0.151695] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.151782] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.151785] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.152080] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.152083] system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.152085] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.152087] system 00:09: [mem 0x00100000-0xbfffffff] could not be reserved [ 0.152090] system 00:09: [mem 0xfed90000-0xffffffff] could not be reserved [ 0.152092] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.152261] pnp: PnP ACPI: found 10 devices [ 0.159341] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 0.159344] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 400000 [ 0.159352] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 [ 0.159366] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000 [ 0.159368] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.159370] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.159376] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc03fffff] [ 0.159380] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref] [ 0.159383] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.159386] pci 0000:05:00.0: BAR 6: assigned [mem 0xfc000000-0xfc07ffff pref] [ 0.159388] pci 0000:00:01.0: PCI bridge to [bus 05] [ 0.159391] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.159394] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfebfffff] [ 0.159396] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.159399] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.159402] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.159406] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff] [ 0.159409] pci 0000:00:1c.0: bridge window [mem 0xcff00000-0xcfffffff 64bit pref] [ 0.159414] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.159416] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.159420] pci 0000:00:1c.1: bridge window [mem 0xf9f00000-0xf9ffffff] [ 0.159423] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc05fffff 64bit pref] [ 0.159428] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.159430] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff] [ 0.159434] pci 0000:00:1c.5: bridge window [mem 0xf9e00000-0xf9efffff] [ 0.159437] pci 0000:00:1c.5: bridge window [mem 0xcfe00000-0xcfefffff 64bit pref] [ 0.159442] pci 0000:00:1e.0: PCI bridge to [bus 01] [ 0.159451] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.159453] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.159455] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.159457] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.159458] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff] [ 0.159460] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff] [ 0.159462] pci_bus 0000:05: resource 0 [io 0xe000-0xefff] [ 0.159464] pci_bus 0000:05: resource 1 [mem 0xfa000000-0xfebfffff] [ 0.159466] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.159468] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff] [ 0.159469] pci_bus 0000:04: resource 1 [mem 0xc0000000-0xc03fffff] [ 0.159471] pci_bus 0000:04: resource 2 [mem 0xcff00000-0xcfffffff 64bit pref] [ 0.159473] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.159475] pci_bus 0000:03: resource 1 [mem 0xf9f00000-0xf9ffffff] [ 0.159477] pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref] [ 0.159479] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] [ 0.159480] pci_bus 0000:02: resource 1 [mem 0xf9e00000-0xf9efffff] [ 0.159482] pci_bus 0000:02: resource 2 [mem 0xcfe00000-0xcfefffff 64bit pref] [ 0.159484] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 0.159486] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] [ 0.159488] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 0.159490] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff] [ 0.159491] pci_bus 0000:01: resource 8 [mem 0xc0000000-0xdfffffff] [ 0.159493] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfed8ffff] [ 0.159546] NET: Registered protocol family 2 [ 0.159759] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.159966] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.160219] TCP: Hash tables configured (established 65536 bind 65536) [ 0.160255] TCP: reno registered [ 0.160268] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.160313] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.160437] NET: Registered protocol family 1 [ 0.161537] pci 0000:05:00.0: Video device with shadowed ROM [ 0.161545] PCI: CLS 32 bytes, default 64 [ 0.161633] Unpacking initramfs... [ 1.024697] Freeing initrd memory: 8224K (ffff880036fe0000 - ffff8800377e8000) [ 1.024712] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.024714] software IO TLB [mem 0xbbfb0000-0xbffb0000] (64MB) mapped at [ffff8800bbfb0000-ffff8800bffaffff] [ 1.024993] microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa0b [ 1.024997] microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa0b [ 1.025027] microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa0b [ 1.025038] microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa0b [ 1.025106] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 1.025147] Scanning for low memory corruption every 60 seconds [ 1.025468] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 1.025487] Initialise system trusted keyring [ 1.025512] audit: initializing netlink subsys (disabled) [ 1.025532] audit: type=2000 audit(1419955982.024:1): initialized [ 1.025810] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.025841] zpool: loaded [ 1.025843] zbud: loaded [ 1.025978] VFS: Disk quotas dquot_6.5.2 [ 1.025997] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.026188] msgmni has been set to 15991 [ 1.026226] Key type big_key registered [ 1.026570] Key type asymmetric registered [ 1.026573] Asymmetric key parser 'x509' registered [ 1.026593] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.026638] io scheduler noop registered [ 1.026641] io scheduler deadline registered [ 1.026656] io scheduler cfq registered (default) [ 1.026835] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 1.026897] pcieport 0000:00:1c.0: enabling device (0106 -> 0107) [ 1.026970] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X [ 1.027124] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X [ 1.027265] pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X [ 1.027366] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 1.027368] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt [ 1.027371] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 1.027388] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 1.027392] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 1.027409] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt [ 1.027411] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 1.027415] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded [ 1.027431] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt [ 1.027433] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 1.027436] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded [ 1.027453] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.027472] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.027519] vesafb: mode is 1280x1024x32, linelength=5120, pages=0 [ 1.027520] vesafb: scrolling: redraw [ 1.027522] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.027538] vesafb: framebuffer at 0xfb000000, mapped to 0xffffc90010e80000, using 5120k, total 5120k [ 1.059424] Console: switching to colour frame buffer device 160x64 [ 1.091179] fb0: VESA VGA frame buffer device [ 1.091197] intel_idle: does not run on family 6 model 23 [ 1.091237] GHES: HEST is not enabled! [ 1.091283] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled [ 1.111776] serial 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.113525] Non-volatile memory driver v1.3 [ 1.113528] Linux agpgart interface v0.103 [ 1.113727] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.113735] ehci-pci: EHCI PCI platform driver [ 1.113833] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 1.113841] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.113854] ehci-pci 0000:00:1a.7: debug port 1 [ 1.117755] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported [ 1.117769] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9dff400 [ 1.123013] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.123054] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.123056] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.123058] usb usb1: Product: EHCI Host Controller [ 1.123060] usb usb1: Manufacturer: Linux 3.18.1-1-desktop ehci_hcd [ 1.123062] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.123179] hub 1-0:1.0: USB hub found [ 1.123186] hub 1-0:1.0: 6 ports detected [ 1.123427] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.123434] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.123445] ehci-pci 0000:00:1d.7: debug port 1 [ 1.127339] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [ 1.127351] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9dff800 [ 1.133012] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.133048] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.133051] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.133052] usb usb2: Product: EHCI Host Controller [ 1.133054] usb usb2: Manufacturer: Linux 3.18.1-1-desktop ehci_hcd [ 1.133056] usb usb2: SerialNumber: 0000:00:1d.7 [ 1.133164] hub 2-0:1.0: USB hub found [ 1.133171] hub 2-0:1.0: 6 ports detected [ 1.133332] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.133337] uhci_hcd: USB Universal Host Controller Interface driver [ 1.133412] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.133418] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.133424] uhci_hcd 0000:00:1a.0: detected 2 ports [ 1.133449] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009400 [ 1.133493] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.133495] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.133497] usb usb3: Product: UHCI Host Controller [ 1.133499] usb usb3: Manufacturer: Linux 3.18.1-1-desktop uhci_hcd [ 1.133501] usb usb3: SerialNumber: 0000:00:1a.0 [ 1.133605] hub 3-0:1.0: USB hub found [ 1.133612] hub 3-0:1.0: 2 ports detected [ 1.133771] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.133776] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.133783] uhci_hcd 0000:00:1a.1: detected 2 ports [ 1.133807] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009480 [ 1.133851] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.133853] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.133855] usb usb4: Product: UHCI Host Controller [ 1.133857] usb usb4: Manufacturer: Linux 3.18.1-1-desktop uhci_hcd [ 1.133859] usb usb4: SerialNumber: 0000:00:1a.1 [ 1.133964] hub 4-0:1.0: USB hub found [ 1.133972] hub 4-0:1.0: 2 ports detected [ 1.134138] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.134143] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 1.134150] uhci_hcd 0000:00:1a.2: detected 2 ports [ 1.134174] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009800 [ 1.134215] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.134218] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.134219] usb usb5: Product: UHCI Host Controller [ 1.134221] usb usb5: Manufacturer: Linux 3.18.1-1-desktop uhci_hcd [ 1.134223] usb usb5: SerialNumber: 0000:00:1a.2 [ 1.134328] hub 5-0:1.0: USB hub found [ 1.134334] hub 5-0:1.0: 2 ports detected [ 1.134492] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.134497] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 1.134503] uhci_hcd 0000:00:1d.0: detected 2 ports [ 1.134520] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009880 [ 1.134561] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.134563] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.134565] usb usb6: Product: UHCI Host Controller [ 1.134567] usb usb6: Manufacturer: Linux 3.18.1-1-desktop uhci_hcd [ 1.134569] usb usb6: SerialNumber: 0000:00:1d.0 [ 1.134674] hub 6-0:1.0: USB hub found [ 1.134680] hub 6-0:1.0: 2 ports detected [ 1.134834] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.134839] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 1.134845] uhci_hcd 0000:00:1d.1: detected 2 ports [ 1.134862] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009c00 [ 1.134903] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.134905] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.134907] usb usb7: Product: UHCI Host Controller [ 1.134909] usb usb7: Manufacturer: Linux 3.18.1-1-desktop uhci_hcd [ 1.134911] usb usb7: SerialNumber: 0000:00:1d.1 [ 1.135020] hub 7-0:1.0: USB hub found [ 1.135027] hub 7-0:1.0: 2 ports detected [ 1.135180] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.135186] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 1.135192] uhci_hcd 0000:00:1d.2: detected 2 ports [ 1.135208] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a000 [ 1.135250] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.135252] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.135254] usb usb8: Product: UHCI Host Controller [ 1.135256] usb usb8: Manufacturer: Linux 3.18.1-1-desktop uhci_hcd [ 1.135257] usb usb8: SerialNumber: 0000:00:1d.2 [ 1.135360] hub 8-0:1.0: USB hub found [ 1.135367] hub 8-0:1.0: 2 ports detected [ 1.135503] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.138062] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.138094] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.138198] mousedev: PS/2 mouse device common for all mice [ 1.138320] rtc_cmos 00:01: RTC can wake from S4 [ 1.138436] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.138458] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.138474] ledtrig-cpu: registered to indicate activity on CPUs [ 1.138494] hidraw: raw HID events driver (C) Jiri Kosina [ 1.138606] usbcore: registered new interface driver usbhid [ 1.138607] usbhid: USB HID core driver [ 1.138665] TCP: cubic registered [ 1.138702] NET: Registered protocol family 10 [ 1.139243] Loading compiled-in X.509 certificates [ 1.139259] registered taskstats version 1 [ 1.139293] AppArmor: AppArmor sha1 policy hashing enabled [ 1.139666] Magic number: 10:158:238 [ 1.139804] rtc_cmos 00:01: setting system clock to 2014-12-30 16:13:02 UTC (1419955982) [ 1.139888] PM: Checking hibernation image partition /dev/disk/by-id/ata-WDC_WD30EZRX-00D8PB0_WD-WCC4N1HT9UK0-part3 [ 1.192243] PM: Hibernation image not present or could not be loaded. [ 1.193447] Freeing unused kernel memory: 1540K (ffffffff81f07000 - ffffffff82088000) [ 1.193449] Write protecting the kernel read-only data: 14336k [ 1.197262] Freeing unused kernel memory: 1636K (ffff880001667000 - ffff880001800000) [ 1.199951] Freeing unused kernel memory: 1248K (ffff880001cc8000 - ffff880001e00000) [ 1.201846] random: systemd urandom read with 7 bits of entropy available [ 1.365825] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 1.365884] ACPI: Power Button [PWRB] [ 1.365963] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 1.366015] ACPI: Power Button [PWRF] [ 1.382046] Floppy drive(s): fd0 is 1.44M [ 1.396672] FDC 0 is a post-1991 82077 [ 1.404323] [drm] Initialized drm 1.1.0 20060810 [ 1.405972] wmi: Mapper loaded [ 1.410167] pata_via 0000:03:00.0: version 0.3.4 [ 1.410992] scsi host0: pata_via [ 1.411315] scsi host1: pata_via [ 1.411377] ata1: PATA max UDMA/133 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17 [ 1.411379] ata2: PATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17 [ 1.412927] checking generic (fb000000 500000) vs hw (d0000000 10000000) [ 1.412929] checking generic (fb000000 500000) vs hw (fa000000 2000000) [ 1.412931] fb: switching to nouveaufb from VESA VGA [ 1.412970] Console: switching to colour dummy device 80x25 [ 1.415541] nouveau [ DEVICE][0000:05:00.0] BOOT0 : 0x094100a1 [ 1.415545] nouveau [ DEVICE][0000:05:00.0] Chipset: G94 (NV94) [ 1.415546] nouveau [ DEVICE][0000:05:00.0] Family : NV50 [ 1.415570] nouveau [ VBIOS][0000:05:00.0] checking PRAMIN for image... [ 1.433385] ata_piix 0000:00:1f.2: version 2.13 [ 1.433507] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 1.434951] scsi host2: ata_piix [ 1.435088] scsi host3: ata_piix [ 1.435148] ata3: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 19 [ 1.435153] ata4: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 19 [ 1.435227] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 1.436279] scsi host4: ata_piix [ 1.436390] scsi host5: ata_piix [ 1.436445] ata5: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 19 [ 1.436449] ata6: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 19 [ 1.468806] nouveau [ VBIOS][0000:05:00.0] ... appears to be valid [ 1.468809] nouveau [ VBIOS][0000:05:00.0] using image from PRAMIN [ 1.468917] nouveau [ VBIOS][0000:05:00.0] BIT signature found [ 1.468920] nouveau [ VBIOS][0000:05:00.0] version 62.94.73.00.00 [ 1.489250] nouveau 0000:05:00.0: irq 28 for MSI/MSI-X [ 1.489258] nouveau [ PMC][0000:05:00.0] MSI interrupts enabled [ 1.489287] nouveau [ PFB][0000:05:00.0] RAM type: DDR2 [ 1.489289] nouveau [ PFB][0000:05:00.0] RAM size: 1024 MiB [ 1.489291] nouveau [ PFB][0000:05:00.0] ZCOMP: 2048 tags [ 1.490155] nouveau [ VOLT][0000:05:00.0] GPU voltage: 1000000uv [ 1.517918] nouveau [ PTHERM][0000:05:00.0] FAN control: PWM [ 1.517930] nouveau [ PTHERM][0000:05:00.0] fan management: automatic [ 1.517962] nouveau [ PTHERM][0000:05:00.0] internal sensor: yes [ 1.537977] nouveau [ CLK][0000:05:00.0] 0f: core 600 MHz shader 1500 MHz memory 400 MHz [ 1.538020] nouveau [ CLK][0000:05:00.0] --: core 500 MHz shader 1250 MHz memory 399 MHz [ 1.538181] [TTM] Zone kernel: Available graphics memory: 4096074 kiB [ 1.538183] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 1.538184] [TTM] Initializing pool allocator [ 1.538189] [TTM] Initializing DMA pool allocator [ 1.538199] nouveau [ DRM] VRAM: 1024 MiB [ 1.538201] nouveau [ DRM] GART: 1048576 MiB [ 1.538204] nouveau [ DRM] TMDS table version 2.0 [ 1.538206] nouveau [ DRM] DCB version 4.0 [ 1.538208] nouveau [ DRM] DCB outp 00: 02000300 00000028 [ 1.538210] nouveau [ DRM] DCB outp 01: 01000302 00020030 [ 1.538212] nouveau [ DRM] DCB outp 02: 04011310 00000028 [ 1.538213] nouveau [ DRM] DCB outp 03: 02011312 00020030 [ 1.538215] nouveau [ DRM] DCB outp 04: 04022332 00c20090 [ 1.538216] nouveau [ DRM] DCB conn 00: 00001030 [ 1.538218] nouveau [ DRM] DCB conn 01: 00002130 [ 1.538220] nouveau [ DRM] DCB conn 02: 00010261 [ 1.546104] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.546106] [drm] Driver supports precise vblank timestamp query. [ 1.554110] nouveau [ DRM] MM: using CRYPT for buffer copies [ 1.567559] ata1.00: ATAPI: HL-DT-STDVD-ROM GDR8164B, 0F08, max UDMA/33 [ 1.573552] ata1.00: configured for UDMA/33 [ 1.577492] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8164B 0F08 PQ: 0 ANSI: 5 [ 1.589715] scsi 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.618274] nouveau [ DRM] allocated 1680x1050 fb: 0x70000, bo ffff88023282a000 [ 1.618358] fbcon: nouveaufb (fb0) is primary device [ 1.685493] Console: switching to colour frame buffer device 210x65 [ 1.686703] nouveau 0000:05:00.0: fb0: nouveaufb frame buffer device [ 1.686705] nouveau 0000:05:00.0: registered panic notifier [ 1.692024] [drm] Initialized nouveau 1.2.1 20120801 for 0000:05:00.0 on minor 0 [ 1.753616] ata5: SATA link down (SStatus 0 SControl 300) [ 1.759019] usb 6-1: new low-speed USB device number 2 using uhci_hcd [ 1.764224] ata6: SATA link down (SStatus 0 SControl 300) [ 2.026011] tsc: Refined TSC clocksource calibration: 2670.864 MHz [ 2.124039] usb 6-1: New USB device found, idVendor=046d, idProduct=c03e [ 2.124042] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.124044] usb 6-1: Product: USB-PS/2 Optical Mouse [ 2.124046] usb 6-1: Manufacturer: Logitech [ 2.140403] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/0003:046D:C03E.0001/input/input5 [ 2.140546] hid-generic 0003:046D:C03E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1/input0 [ 2.197055] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.197067] ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.199060] ata4.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.199071] ata4.01: SATA link down (SStatus 0 SControl 300) [ 2.199080] ata4.01: link offline, clearing class 3 to NONE [ 2.202118] ata4.00: ATAPI: Optiarc DVD RW AD-7240S, 1.02, max UDMA/100 [ 2.203236] ata3.00: ATA-9: WDC WD30EZRX-00D8PB0, 80.00A80, max UDMA/133 [ 2.203239] ata3.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.203368] ata3.01: ATA-9: WDC WD30EZRX-00D8PB0, 80.00A80, max UDMA/133 [ 2.203370] ata3.01: 5860533168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.206229] ata3.00: configured for UDMA/133 [ 2.208117] ata4.00: configured for UDMA/100 [ 2.209223] ata3.01: configured for UDMA/133 [ 2.209296] scsi 2:0:0:0: Direct-Access ATA WDC WD30EZRX-00D 0A80 PQ: 0 ANSI: 5 [ 2.209451] sd 2:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 2.209453] sd 2:0:0:0: [sda] 4096-byte physical blocks [ 2.209471] sd 2:0:0:0: [sda] Write Protect is off [ 2.209474] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.209482] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.209541] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 2.209703] scsi 2:0:1:0: Direct-Access ATA WDC WD30EZRX-00D 0A80 PQ: 0 ANSI: 5 [ 2.209865] sd 2:0:1:0: Attached scsi generic sg2 type 0 [ 2.211189] scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7240S 1.02 PQ: 0 ANSI: 5 [ 2.221811] scsi 3:0:0:0: Attached scsi generic sg3 type 5 [ 2.230562] sd 2:0:1:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 2.230565] sd 2:0:1:0: [sdb] 4096-byte physical blocks [ 2.241825] sd 2:0:1:0: [sdb] Write Protect is off [ 2.241828] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.274164] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.547016] usb 6-2: new low-speed USB device number 3 using uhci_hcd [ 2.964044] usb 6-2: New USB device found, idVendor=04f2, idProduct=0200 [ 2.964047] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.964049] usb 6-2: Product: USB Wireless HID Receiver [ 2.964051] usb 6-2: Manufacturer: Chicony [ 2.998427] input: Chicony USB Wireless HID Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/0003:04F2:0200.0002/input/input6 [ 2.998525] hid-generic 0003:04F2:0200.0002: input,hidraw1: USB HID v1.10 Keyboard [Chicony USB Wireless HID Receiver] on usb-0000:00:1d.0-2/input0 [ 3.026078] Switched to clocksource tsc [ 3.030226] sda: sda1 sda2 sda3 sda4 [ 3.030629] sd 2:0:0:0: [sda] Attached SCSI disk [ 3.113097] input: Chicony USB Wireless HID Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/0003:04F2:0200.0003/input/input7 [ 3.113211] hid-generic 0003:04F2:0200.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [Chicony USB Wireless HID Receiver] on usb-0000:00:1d.0-2/input1 [ 3.138376] input: Chicony USB Wireless HID Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.2/0003:04F2:0200.0004/input/input8 [ 3.138475] hid-generic 0003:04F2:0200.0004: input,hidraw3: USB HID v1.10 Mouse [Chicony USB Wireless HID Receiver] on usb-0000:00:1d.0-2/input2 [ 3.405653] sdb: sdb1 sdb2 [ 3.405887] sd 2:0:1:0: [sdb] Attached SCSI disk [ 3.422102] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 3.422106] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.422371] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 3.433626] sr 3:0:0:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.433821] sr 3:0:0:0: Attached scsi CD-ROM sr1 [ 5.246014] raid6: sse2x1 4750 MB/s [ 5.263007] raid6: sse2x2 5058 MB/s [ 5.280002] raid6: sse2x4 7816 MB/s [ 5.280004] raid6: using algorithm sse2x4 (7816 MB/s) [ 5.280005] raid6: using ssse3x2 recovery algorithm [ 5.280186] xor: measuring software checksum speed [ 5.290002] prefetch64-sse: 11196.000 MB/sec [ 5.300001] generic_sse: 9880.000 MB/sec [ 5.300003] xor: using function: prefetch64-sse (11196.000 MB/sec) [ 5.305520] Btrfs loaded, assert=on [ 5.305971] BTRFS: device fsid ac7c724e-3542-4e40-a173-d5aaef2ea0c7 devid 1 transid 10308 /dev/sda3 [ 5.306220] BTRFS: device fsid 2342beae-2749-4aa2-bf59-bdef9ee95df8 devid 1 transid 464 /dev/sdb1 [ 5.332893] BTRFS info (device sda3): disk space caching is enabled [ 8.792370] BTRFS info (device sda3): disk space caching is enabled [ 9.907382] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000052f (\GPR2) (20140926/utaddress-258) [ 9.907389] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.940192] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 9.949018] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 10.042632] gpio_ich: GPIO from 451 to 511 on gpio_ich [ 10.102329] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt [ 10.157561] iTCO_vendor_support: vendor-support=0 [ 10.157749] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 10.157791] iTCO_wdt: Found a ICH10 TCO device (Version=2, TCOBASE=0x0860) [ 10.157901] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 10.214544] ppdev: user-space parallel port driver [ 10.438084] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 10.438317] r8169 0000:02:00.0: irq 29 for MSI/MSI-X [ 10.438497] r8169 0000:02:00.0 eth0: RTL8168d/8111d at 0xffffc90010e5a000, 00:19:66:e9:13:29, XID 081000c0 IRQ 29 [ 10.438499] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 10.440415] r8169 0000:02:00.0 enp2s0: renamed from eth0 [ 10.553832] device-mapper: uevent: version 1.0.3 [ 10.553951] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com [ 10.672249] snd_hda_intel 0000:00:1b.0: irq 30 for MSI/MSI-X [ 10.684452] sound hdaudioC0D0: autoconfig: line_outs=4 (0x1c/0x19/0x22/0x23/0x0) type:line [ 10.684456] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 10.684458] sound hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 10.684460] sound hdaudioC0D0: mono: mono_out=0x0 [ 10.684461] sound hdaudioC0D0: dig-out=0x20/0x0 [ 10.684463] sound hdaudioC0D0: inputs: [ 10.684465] sound hdaudioC0D0: Mic=0x1a [ 10.684467] sound hdaudioC0D0: Line=0x1b [ 10.684468] sound hdaudioC0D0: CD=0x1f [ 10.690722] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 10.690802] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 10.690874] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 10.690948] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 10.691047] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 10.691120] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 11.118207] random: nonblocking pool is initialized [ 16.793308] NET: Registered protocol family 38 [ 18.333893] BTRFS: device fsid 6ed7620f-94fe-41dc-84ae-3aecbe09cb80 devid 1 transid 10505 /dev/mapper/cr_home1 [ 18.375619] BTRFS: device fsid 6ed7620f-94fe-41dc-84ae-3aecbe09cb80 devid 2 transid 10505 /dev/mapper/cr_home2 [ 18.405909] BTRFS info (device dm-0): disk space caching is enabled [ 32.550239] audit: type=1305 audit(1419956013.909:2): audit_pid=679 old=0 auid=4294967295 ses=4294967295 res=1 [ 33.372854] NET: Registered protocol family 17 [ 33.437670] No iBFT detected. [ 33.916315] r8169 0000:02:00.0 enp2s0: link down [ 33.916321] r8169 0000:02:00.0 enp2s0: link down [ 33.916362] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 36.739170] r8169 0000:02:00.0 enp2s0: link up [ 36.739178] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready [ 73.891233] cfg80211: Calling CRDA to update world regulatory domain [ 73.906266] cfg80211: World regulatory domain updated: [ 73.906271] cfg80211: DFS Master region: unset [ 73.906273] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 73.906275] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 73.906277] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 73.906279] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 73.906281] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A) [ 73.906283] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 73.906285] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 73.906286] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 73.906288] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 75.136311] vboxdrv: Found 4 processor cores. [ 75.136848] vboxdrv: fAsync=0 offMin=0x220 offMax=0x1c88 [ 75.136955] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 75.136957] vboxdrv: Successfully loaded version 4.3.20_OSE (interface 0x001a0008). [ 75.344484] vboxpci: IOMMU not found (not registered) [ 94.758776] fuse init (API version 7.23) [ 95.274944] Bluetooth: Core ver 2.19 [ 95.274966] NET: Registered protocol family 31 [ 95.274968] Bluetooth: HCI device and connection manager initialized [ 95.274975] Bluetooth: HCI socket layer initialized [ 95.274977] Bluetooth: L2CAP socket layer initialized [ 95.274985] Bluetooth: SCO socket layer initialized [ 95.321549] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 95.321553] Bluetooth: BNEP filters: protocol multicast [ 95.321562] Bluetooth: BNEP socket layer initialized