Allocated 24576 bytes for 24 pacas at c00000000fffa000 Using P5040 DS machine description MMU: Supported page sizes 4 KB as direct 1024 KB as direct 2048 KB as direct 4096 KB as direct 16384 KB as direct 65536 KB as direct 262144 KB as direct 1048576 KB as direct MMU: Book3E HW tablewalk not supported Found initrd at 0xc00000002fc62000:0xc00000002ffffb62 No /soc@ffe000000/qman@318000 property 'fsl,qman-fqd', using memblock_alloc(0000000000400000) No /soc@ffe000000/qman@318000 property 'fsl,qman-pfdr', using memblock_alloc(0000000002000000) Qman ver:0a01,01,02 No /soc@ffe000000/bman@31a000 property 'fsl,bman-fbpr', using memblock_alloc(0000000001000000) Bman ver:0a02,01,00 No USDPAA memory, no 'usdpaa_mem' bootarg Found legacy serial port 0 for /soc@ffe000000/serial@11c500 mem=ffe11c500, taddr=ffe11c500, irq=0, clk=400000000, speed=0 Found legacy serial port 1 for /soc@ffe000000/serial@11c600 mem=ffe11c600, taddr=ffe11c600, irq=0, clk=400000000, speed=0 Found legacy serial port 2 for /soc@ffe000000/serial@11d500 mem=ffe11d500, taddr=ffe11d500, irq=0, clk=400000000, speed=0 Found legacy serial port 3 for /soc@ffe000000/serial@11d600 mem=ffe11d600, taddr=ffe11d600, irq=0, clk=400000000, speed=0 bootconsole [udbg0] enabled CPU maps initialized for 1 thread per core (thread shift is 0) Freed 20480 bytes for unused pacas Starting Linux PPC64 #94 SMP Sat Jan 31 11:37:05 MSK 2015 ----------------------------------------------------- ppc64_pft_size = 0x0 physicalMemorySize = 0x200000000 ppc64_caches.dcache_line_size = 0x40 ppc64_caches.icache_line_size = 0x40 ----------------------------------------------------- Linux version 3.8.13-rt9-QorIQ-SDK-V1.5 (dima@ubunta) (gcc version 4.7.3 (GCC) ) #94 SMP Sat Jan 31 11:37:05 CF000012 Setup Arch [boot]0012 Setup Arch P5040 DS board from Freescale Semiconductor Top of RAM: 0x200000000, Total RAM: 0x200000000 Memory hole size: 0MB Zone ranges: DMA [mem 0x00000000-0x7fffffff] Normal [mem 0x80000000-0x1ffffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x00000000-0x1ffffffff] On node 0 totalpages: 2097152 free_area_init_node: node 0, pgdat c00000000097ab00, node_mem_map c000000003ff3000 DMA zone: 7168 pages used for memmap DMA zone: 0 pages reserved DMA zone: 517120 pages, LIFO batch:31 Normal zone: 21504 pages used for memmap Normal zone: 1551360 pages, LIFO batch:31 MMU: Allocated 2112 bytes of context maps for 255 contexts CF000015 Setup Done [boot]0015 Setup Done PERCPU: Embedded 10 pages/cpu @c00000000b100000 s11328 r0 d29632 u262144 pcpu-alloc: s11328 r0 d29632 u262144 alloc=1*1048576 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2068480 Kernel command line: console=ttyS0,115200 root=/dev/ram rw loglevel=8 PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Memory: 8127128k/8388608k available (9480k kernel code, 261480k reserved, 960k data, 171k bss, 264k init) Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=24 to nr_cpu_ids=4. NR_IRQS:512 nr_irqs:512 16 mpic: Setting up MPIC " OpenPIC " version 1.2 at ffe040000, max 4 CPUs mpic: ISU size: 512, shift: 9, mask: 1ff mpic: Initializing for 512 sources time_init: decrementer frequency = 50.000000 MHz time_init: processor frequency = 2200.000000 MHz clocksource: timebase mult[14000000] shift[24] registered clockevent: decrementer mult[ccccccd] shift[32] cpu[0] Console: colour dummy device 80x25 pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 256 mpic: requesting IPIs... e500 family performance monitor hardware support registered Brought up 4 CPUs devtmpfs: initialized xor: measuring software checksum speed 8regs : 3380.000 MB/sec 8regs_prefetch: 2945.000 MB/sec 32regs : 3376.000 MB/sec 32regs_prefetch: 2838.000 MB/sec xor: using function: 8regs (3380.000 MB/sec) NET: Registered protocol family 16 Found FSL PCI host bridge at 0x0000000ffe200000. Firmware bus number: 0->1 PCI host bridge /pcie@ffe200000 (primary) ranges: MEM 0x0000000c00000000..0x0000000c1fffffff -> 0x00000000e0000000 IO 0x0000000ff8000000..0x0000000ff800ffff -> 0x0000000000000000 /pcie@ffe200000: PCICSRBAR @ 0xdf000000 /pcie@ffe200000: Setup 64-bit PCI DMA window /pcie@ffe200000: DMA window size is 0xdf000000 Found FSL PCI host bridge at 0x0000000ffe201000. Firmware bus number: 0->0 PCI host bridge /pcie@ffe201000 ranges: MEM 0x0000000c20000000..0x0000000c3fffffff -> 0x00000000e0000000 IO 0x0000000ff8010000..0x0000000ff801ffff -> 0x0000000000000000 /pcie@ffe201000: PCICSRBAR @ 0xdf000000 /pcie@ffe201000: Setup 64-bit PCI DMA window /pcie@ffe201000: DMA window size is 0xdf000000 software IO TLB [mem 0x0bdca000-0x0fdca000] (64MB) mapped at [c00000000bdca000-c00000000fdc9fff] PCI: Probing PCI hardware fsl-pci ffe200000.pcie: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x10000-0x1ffff] (bus address [0x0000-0xffff]) pci_bus 0000:00: root bus resource [mem 0xc00000000-0xc1fffffff] (bus address [0xe0000000-0xffffffff]) pci_bus 0000:00: root bus resource [bus 00-01] pci_bus 0000:00: busn_res: [bus 00-01] end is updated to ff pci 0000:00:00.0: [1957:0450] type 01 class 0x0b2000 pci 0000:00:00.0: reg 10: [mem 0xdf000000-0xdfffffff] pci 0000:00:00.0: supports D1 D2 pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:01:00.0: [10de:104a] type 00 class 0x030000 pci 0000:01:00.0: reg 10: [mem 0xc00000000-0xc00ffffff] pci 0000:01:00.0: reg 14: [mem 0xc08000000-0xc0fffffff 64bit pref] pci 0000:01:00.0: reg 1c: [mem 0xc10000000-0xc11ffffff 64bit pref] pci 0000:01:00.0: reg 24: [io 0x11000-0x1107f] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref] pci 0000:01:00.1: [10de:0e08] type 00 class 0x040300 pci 0000:01:00.1: reg 10: [mem 0xc12000000-0xc12003fff] pci 0000:00:00.0: PCI bridge to [bus 01-ff] pci 0000:00:00.0: bridge window [io 0x11000-0x11fff] pci 0000:00:00.0: bridge window [mem 0xc00000000-0xc120fffff] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01 fsl-pci ffe201000.pcie: PCI host bridge to bus 0001:00 pci_bus 0001:00: root bus resource [io 0x21000-0x30fff] (bus address [0x0000-0xffff]) pci_bus 0001:00: root bus resource [mem 0xc20000000-0xc3fffffff] (bus address [0xe0000000-0xffffffff]) pci_bus 0001:00: root bus resource [bus 00] pci_bus 0001:00: busn_res: [bus 00] end is updated to ff pci 0001:00:00.0: [1957:0450] type 01 class 0x0b2000 pci 0001:00:00.0: reg 10: [mem 0xdf000000-0xdfffffff] pci 0001:00:00.0: supports D1 D2 pci 0001:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring pci 0001:00:00.0: PCI bridge to [bus 01-ff] pci 0001:00:00.0: bridge window [io 0x21000-0x21fff] pci 0001:00:00.0: bridge window [mem 0x00000000-0x000fffff] pci 0001:00:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01 pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 01 PCI: Cannot allocate resource region 0 of device 0000:00:00.0, will remap PCI: Cannot allocate resource region 0 of device 0001:00:00.0, will remap PCI 0000:00 Cannot reserve Legacy IO [io 0x10000-0x10fff] PCI 0001:00 Cannot reserve Legacy IO [io 0x21000-0x21fff] pci 0000:00:00.0: bridge window [mem 0x00100000-0x001fffff pref] to [bus 01] add_size 200000 pci 0001:00:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 pci 0000:00:00.0: res[9]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000 pci 0000:00:00.0: BAR 0: can't assign mem (size 0x1000000) pci 0000:00:00.0: BAR 9: can't assign mem pref (size 0x300000) pci 0000:01:00.0: BAR 6: assigned [mem 0xc01000000-0xc0107ffff pref] pci 0000:00:00.0: PCI bridge to [bus 01] pci 0000:00:00.0: bridge window [io 0x10000-0x1ffff] pci 0000:00:00.0: bridge window [mem 0xc00000000-0xc1fffffff] pci 0001:00:00.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 pci 0001:00:00.0: BAR 0: can't assign mem (size 0x1000000) pci 0001:00:00.0: BAR 9: can't assign mem pref (size 0x200000) pci 0001:00:00.0: PCI bridge to [bus 01] pci 0001:00:00.0: bridge window [io 0x21000-0x30fff] pci 0001:00:00.0: bridge window [mem 0xc20000000-0xc3fffffff] pci_bus 0000:00: resource 4 [io 0x10000-0x1ffff] pci_bus 0000:00: resource 5 [mem 0xc00000000-0xc1fffffff] pci_bus 0000:01: resource 0 [io 0x10000-0x1ffff] pci_bus 0000:01: resource 1 [mem 0xc00000000-0xc1fffffff] pci_bus 0001:00: resource 4 [io 0x21000-0x30fff] pci_bus 0001:00: resource 5 [mem 0xc20000000-0xc3fffffff] pci_bus 0001:01: resource 0 [io 0x21000-0x30fff] pci_bus 0001:01: resource 1 [mem 0xc20000000-0xc3fffffff] PCI: Probing PCI hardware done Setting up Freescale MSI support Setting up Freescale MSI support Setting up Freescale MSI support bio: create slab at 0 raid6: int64x1 586 MB/s raid6: int64x2 944 MB/s raid6: int64x4 1314 MB/s raid6: int64x8 1166 MB/s raid6: using algorithm int64x4 (1314 MB/s) raid6: using intx1 recovery algorithm SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Bman err interrupt handler present Bman portal initialised, cpu 0 Bman portal initialised, cpu 1 Bman portal initialised, cpu 2 Bman portal initialised, cpu 3 Bman portals initialised Qman err interrupt handler present QMan: Allocated lookup table at 8000000000000000, entry count 65537 Qman portal initialised, cpu 0 Qman portal initialised, cpu 1 Qman portal initialised, cpu 2 Qman portal initialised, cpu 3 Qman portals initialised Bman: BPID allocator includes range 32:32 Qman: FQID allocator includes range 256:256 Qman: FQID allocator includes range 32768:32768 Qman: CGRID allocator includes range 0:256 Qman: pool channel allocator includes range 33:15 Switching to clocksource timebase PCI: CLS 32 bytes, default 64 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 3704k freed fsl-rcpm ffe0e2000.global-utilities: Freescale RCPM driver HugeTLB registered 1 MB page size, pre-allocated 0 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages HugeTLB registered 16 MB page size, pre-allocated 0 pages HugeTLB registered 64 MB page size, pre-allocated 0 pages HugeTLB registered 256 MB page size, pre-allocated 0 pages HugeTLB registered 1 GB page size, pre-allocated 0 pages NTFS driver 2.1.30 [Flags: R/O]. jffs2: version 2.2. (NAND) �© 2001-2006 Red Hat, Inc. msgmni has been set to 15880 async_tx: api initialized (async) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 fsl-raideng ffe320000.raideng: Freescale RAID Engine driver fsl-raideng ffe320000.raideng: Ver = 10100 fsl-raideng ffe320000.raideng: RE mode is 80000000 fsl-raideng ffe320000.raideng: Galois Field Polynomial is 1d000000 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250.0: ttyS0 at MMIO 0xffe11c500 (irq = 36) is a 16550A console [ttyS0] enabled, bootconsole disabled console [ttyS0] enabled, bootconsole disabled serial8250.0: ttyS1 at MMIO 0xffe11c600 (irq = 36) is a 16550A serial8250.0: ttyS2 at MMIO 0xffe11d500 (irq = 37) is a 16550A serial8250.0: ttyS3 at MMIO 0xffe11d600 (irq = 37) is a 16550A ePAPR hypervisor byte channel driver [drm] Initialized drm 1.1.0 20060810 ##boot0=d90a0a1 ##strap=406892 nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0d90a0a1 nouveau [ DEVICE][0000:01:00.0] Chipset: GF119 (NVD9) nouveau [ DEVICE][0000:01:00.0] Family : NVD0 nouveau [ VBIOS][0000:01:00.0] checking OpenFirmware for image... nouveau [ VBIOS][0000:01:00.0] Unable to get the OF node nouveau [ VBIOS][0000:01:00.0] ... signature not found nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image... ##nouveau_bios_shadow_pramin(107) bar0=0 ##val=1 irq 482: nobody cared (try booting with the "irqpoll" option) Call Trace: [c0000001fffd3870] [c000000000008f98] .show_stack+0x78/0x1e0 (unreliable) [c0000001fffd3940] [c0000000000a7d8c] .__report_bad_irq+0x4c/0x140 [c0000001fffd39e0] [c0000000000a84d4] .note_interrupt+0x284/0x2f0 [c0000001fffd3a90] [c0000000000a4ea0] .handle_irq_event_percpu+0x160/0x2c0 [c0000001fffd3b80] [c0000000000a5058] .handle_irq_event+0x58/0xc0 [c0000001fffd3c00] [c0000000000a8f4c] .handle_level_irq+0xbc/0x170 [c0000001fffd3c80] [c0000000000a440c] .generic_handle_irq+0x3c/0x70 [c0000001fffd3d00] [c00000000003058c] .fsl_error_int_handler+0xdc/0x120 [c0000001fffd3da0] [c0000000000a4e2c] .handle_irq_event_percpu+0xec/0x2c0 [c0000001fffd3e90] [c0000000000a5058] .handle_irq_event+0x58/0xc0 [c0000001fffd3f10] [c0000000000a97dc] .handle_fasteoi_irq+0xcc/0x1c0 [c0000001fffd3f90] [c000000000014e7c] .call_handle_irq+0x1c/0x2c [c000000000a23a30] [c0000000000050a4] .do_IRQ+0x174/0x1e0 [c000000000a23ae0] [c000000000000bfc] restore_check_irq_replay+0x2c/0x5c --- Exception: 501 at .book3e_idle+0x24/0x4c LR = .book3e_idle+0x24/0x4c [c000000000a23dd0] [c00000000000ade4] .cpu_idle+0x134/0x1d0 (unreliable) [c000000000a23e80] [c000000000001b88] .rest_init+0x88/0xa0 [c000000000a23ef0] [c000000000900a3c] .start_kernel+0x448/0x468 [c000000000a23f90] [c00000000000044c] .start_here_common+0x24/0x58 handlers: [] .fsl_pci_pme_handle Disabling IRQ #482