Allocated 49152 bytes for 24 pacas at c00000000fff4000 Using CoreNet Generic machine description MMU: Supported page sizes 4 KB as direct 4096 KB as direct 16384 KB as direct 65536 KB as direct 262144 KB as direct 1048576 KB as direct MMU: Book3E HW tablewalk not supported Found initrd at 0xc00000002fc62000:0xc00000002ffffb62 Found legacy serial port 0 for /soc@ffe000000/serial@11c500 mem=ffe11c500, taddr=ffe11c500, irq=0, clk=400000000, speed=0 Found legacy serial port 1 for /soc@ffe000000/serial@11c600 mem=ffe11c600, taddr=ffe11c600, irq=0, clk=400000000, speed=0 Found legacy serial port 2 for /soc@ffe000000/serial@11d500 mem=ffe11d500, taddr=ffe11d500, irq=0, clk=400000000, speed=0 Found legacy serial port 3 for /soc@ffe000000/serial@11d600 mem=ffe11d600, taddr=ffe11d600, irq=0, clk=400000000, speed=0 bootconsole [udbg0] enabled CPU maps initialized for 1 thread per core (thread shift is 0) Freed 40960 bytes for unused pacas Starting Linux PPC64 #3 SMP Sat Jan 31 13:37:58 MSK 2015 ----------------------------------------------------- ppc64_pft_size = 0x0 phys_mem_size = 0x200000000 dcache_line_size = 0x40 icache_line_size = 0x40 cpu_features = 0x00180400581802c0 possible = 0x08380480581802c8 always = 0x0000000010100240 cpu_user_features = 0xcc008000 0x08000000 mmu_features = 0x000a0010 firmware_features = 0x0000000000000000 ----------------------------------------------------- <- setup_system() Linux version 3.18.5 (dima@ubunta) (gcc version 4.7.3 (GCC) ) #3 SMP Sat Jan 31 13:37:58 MSK 2015 CF000012 Setup Arch [boot]0012 Setup Arch CoreNet Generic board Top of RAM: 0x200000000, Total RAM: 0x200000000 Memory hole size: 0MB Zone ranges: DMA [mem 0x00000000-0x7fffffff] DMA32 empty Normal [mem 0x80000000-0x1ffffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x00000000-0x1ffffffff] Initmem setup node 0 [mem 0x00000000-0x1ffffffff] On node 0 totalpages: 2097152 free_area_init_node: node 0, pgdat c000000000a9f840, node_mem_map c000000003ff3000 DMA zone: 7168 pages used for memmap DMA zone: 0 pages reserved DMA zone: 524288 pages, LIFO batch:31 Normal zone: 21504 pages used for memmap Normal zone: 1572864 pages, LIFO batch:31 MMU: Allocated 2112 bytes of context maps for 255 contexts CF000015 Setup Done [boot]0015 Setup Done PERCPU: Embedded 12 pages/cpu @c00000000b100000 s11072 r0 d38080 u262144 pcpu-alloc: s11072 r0 d38080 u262144 alloc=1*1048576 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2068480 Kernel command line: console=ttyS0,115200 root=/dev/ram rw loglevel=8 log_buf_len individual max cpu contribution: 4096 bytes log_buf_len total cpu_extra contributions: 12288 bytes log_buf_len min size: 16384 bytes log_buf_len: 32768 bytes early log buf free: 12512(76%) PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Sorting __ex_table... Memory: 8178752K/8388608K available (7464K kernel code, 1260K rwdata, 2780K rodata, 292K init, 222K bss, 20) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=24 to nr_cpu_ids=4. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 NR_IRQS:512 nr_irqs:512 16 mpic: Setting up MPIC " OpenPIC " version 1.2 at ffe040000, max 4 CPUs mpic: ISU size: 512, shift: 9, mask: 1ff mpic: Initializing for 512 sources time_init: decrementer frequency = 50.000000 MHz time_init: processor frequency = 2200.000000 MHz clocksource: timebase mult[14000000] shift[24] registered clockevent: decrementer mult[ccccccd] shift[32] cpu[0] Console: colour dummy device 80x25 pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) Brought up 4 CPUs devtmpfs: initialized NET: Registered protocol family 16 Found FSL PCI host bridge at 0x0000000ffe200000. Firmware bus number: 0->1 PCI host bridge /pcie@ffe200000 ranges: MEM 0x0000000c00000000..0x0000000c1fffffff -> 0x00000000e0000000 IO 0x0000000ff8000000..0x0000000ff800ffff -> 0x0000000000000000 /pcie@ffe200000: PCICSRBAR @ 0xdf000000 /pcie@ffe200000: Setup 64-bit PCI DMA window /pcie@ffe200000: DMA window size is 0xdf000000 Found FSL PCI host bridge at 0x0000000ffe201000. Firmware bus number: 0->0 PCI host bridge /pcie@ffe201000 ranges: MEM 0x0000000c20000000..0x0000000c3fffffff -> 0x00000000e0000000 IO 0x0000000ff8010000..0x0000000ff801ffff -> 0x0000000000000000 /pcie@ffe201000: PCICSRBAR @ 0xdf000000 /pcie@ffe201000: Setup 64-bit PCI DMA window /pcie@ffe201000: DMA window size is 0xdf000000 software IO TLB [mem 0x0bdcc000-0x0fdcc000] (64MB) mapped at [c00000000bdcc000-c00000000fdcbfff] PCI: Probing PCI hardware fsl-pci ffe200000.pcie: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x10000-0x1ffff] (bus address [0x0000-0xffff]) pci_bus 0000:00: root bus resource [mem 0xc00000000-0xc1fffffff] (bus address [0xe0000000-0xffffffff]) pci_bus 0000:00: root bus resource [bus 00-01] pci_bus 0000:00: busn_res: [bus 00-01] end is updated to ff pci 0000:00:00.0: [1957:0450] type 01 class 0x0b2000 pci 0000:00:00.0: reg 0x10: [mem 0xdf000000-0xdfffffff] pci 0000:00:00.0: supports D1 D2 pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:01:00.0: [10de:1040] type 00 class 0x030000 pci 0000:01:00.0: reg 0x10: [mem 0xc00000000-0xc00ffffff] pci 0000:01:00.0: reg 0x14: [mem 0xc08000000-0xc0fffffff 64bit pref] pci 0000:01:00.0: reg 0x1c: [mem 0xc10000000-0xc11ffffff 64bit pref] pci 0000:01:00.0: reg 0x24: [io 0x11000-0x1107f] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] pci 0000:01:00.1: [10de:0e08] type 00 class 0x040300 pci 0000:01:00.1: reg 0x10: [mem 0xc12000000-0xc12003fff] pci 0000:00:00.0: PCI bridge to [bus 01-ff] pci 0000:00:00.0: bridge window [io 0x11000-0x11fff] pci 0000:00:00.0: bridge window [mem 0xc00000000-0xc120fffff] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01 fsl-pci ffe201000.pcie: PCI host bridge to bus 0001:00 pci_bus 0001:00: root bus resource [io 0x21000-0x30fff] (bus address [0x0000-0xffff]) pci_bus 0001:00: root bus resource [mem 0xc20000000-0xc3fffffff] (bus address [0xe0000000-0xffffffff]) pci_bus 0001:00: root bus resource [bus 00] pci_bus 0001:00: busn_res: [bus 00] end is updated to ff pci 0001:00:00.0: [1957:0450] type 01 class 0x0b2000 pci 0001:00:00.0: reg 0x10: [mem 0xdf000000-0xdfffffff] pci 0001:00:00.0: supports D1 D2 pci 0001:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring pci 0001:00:00.0: PCI bridge to [bus 01-ff] pci 0001:00:00.0: bridge window [io 0x21000-0x21fff] pci 0001:00:00.0: bridge window [mem 0x00000000-0x000fffff] pci 0001:00:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01 pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 01 PCI: Cannot allocate resource region 0 of device 0000:00:00.0, will remap PCI: Cannot allocate resource region 0 of device 0001:00:00.0, will remap PCI 0000:00 Cannot reserve Legacy IO [io 0x10000-0x10fff] PCI 0001:00 Cannot reserve Legacy IO [io 0x21000-0x21fff] pci 0000:00:00.0: BAR 0: no space for [mem size 0x01000000] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x01000000] pci 0000:01:00.0: BAR 6: assigned [mem 0xc01000000-0xc0107ffff pref] pci 0000:00:00.0: PCI bridge to [bus 01] pci 0000:00:00.0: bridge window [io 0x10000-0x1ffff] pci 0000:00:00.0: bridge window [mem 0xc00000000-0xc1fffffff] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc pci_bus 0000:00: resource 4 [io 0x10000-0x1ffff] pci_bus 0000:00: resource 5 [mem 0xc00000000-0xc1fffffff] pci_bus 0000:01: resource 0 [io 0x10000-0x1ffff] pci_bus 0000:01: resource 1 [mem 0xc00000000-0xc1fffffff] pci 0001:00:00.0: BAR 0: no space for [mem size 0x01000000] pci 0001:00:00.0: BAR 0: failed to assign [mem size 0x01000000] pci 0001:00:00.0: PCI bridge to [bus 01] pci 0001:00:00.0: bridge window [io 0x21000-0x30fff] pci 0001:00:00.0: bridge window [mem 0xc20000000-0xc3fffffff] pci_bus 0001:00: Some PCI device resources are unassigned, try booting with pci=realloc pci_bus 0001:00: resource 4 [io 0x21000-0x30fff] pci_bus 0001:00: resource 5 [mem 0xc20000000-0xc3fffffff] pci_bus 0001:01: resource 0 [io 0x21000-0x30fff] pci_bus 0001:01: resource 1 [mem 0xc20000000-0xc3fffffff] PCI: Probing PCI hardware done Setting up Freescale MSI support Setting up Freescale MSI support Setting up Freescale MSI support Freescale Elo series DMA driver fsl-elo-dma ffe100300.dma: #0 (fsl,eloplus-dma-channel), irq 28 fsl-elo-dma ffe100300.dma: #1 (fsl,eloplus-dma-channel), irq 29 fsl-elo-dma ffe100300.dma: #2 (fsl,eloplus-dma-channel), irq 30 fsl-elo-dma ffe100300.dma: #3 (fsl,eloplus-dma-channel), irq 31 fsl-elo-dma ffe101300.dma: #0 (fsl,eloplus-dma-channel), irq 32 fsl-elo-dma ffe101300.dma: #1 (fsl,eloplus-dma-channel), irq 33 fsl-elo-dma ffe101300.dma: #2 (fsl,eloplus-dma-channel), irq 34 fsl-elo-dma ffe101300.dma: #3 (fsl,eloplus-dma-channel), irq 35 vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:01:00.0 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered EDAC MC: Ver: 3.0.0 Switched to clocksource timebase NET: Registered protocol family 2 TCP established hash table entries: 65536 (order: 7, 524288 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 65536 bind 65536) TCP: reno registered UDP hash table entries: 4096 (order: 5, 131072 bytes) UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 32 bytes, default 64 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 3700K (c00000002fc62000 - c00000002ffff000) futex hash table entries: 1024 (order: 4, 65536 bytes) HugeTLB registered 4 MB page size, pre-allocated 0 pages HugeTLB registered 16 MB page size, pre-allocated 0 pages HugeTLB registered 64 MB page size, pre-allocated 0 pages HugeTLB registered 256 MB page size, pre-allocated 0 pages HugeTLB registered 1 GB page size, pre-allocated 0 pages NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered ntfs: driver 2.1.31 [Flags: R/O]. jffs2: version 2.2. (NAND) �© 2001-2006 Red Hat, Inc. msgmni has been set to 15981 io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) aer 0000:00:00.0:pcie02: service driver aer loaded aer 0001:00:00.0:pcie02: service driver aer loaded Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled console [ttyS0] disabled serial8250.0: ttyS0 at MMIO 0xffe11c500 (irq = 36, base_baud = 25000000) is a 16550A console [ttyS0] enabled console [ttyS0] enabled bootconsole [udbg0] disabled bootconsole [udbg0] disabled serial8250.0: ttyS1 at MMIO 0xffe11c600 (irq = 36, base_baud = 25000000) is a 16550A serial8250.0: ttyS2 at MMIO 0xffe11d500 (irq = 37, base_baud = 25000000) is a 16550A serial8250.0: ttyS3 at MMIO 0xffe11d600 (irq = 37, base_baud = 25000000) is a 16550A ePAPR hypervisor byte channel driver [drm] Initialized drm 1.1.0 20060810 nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0d9000a1 nouveau [ DEVICE][0000:01:00.0] Chipset: GF119 (NVD9) nouveau [ DEVICE][0000:01:00.0] Family : NVC0 nouveau [ VBIOS][0000:01:00.0] checking OpenFirmware for image... nouveau [ VBIOS][0000:01:00.0] Unable to get the OF node nouveau [ VBIOS][0000:01:00.0] ... signature not found nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image... nouveau [ VBIOS][0000:01:00.0] ... signature not found nouveau [ VBIOS][0000:01:00.0] checking PROM for image... nouveau [ VBIOS][0000:01:00.0] ... appears to be valid nouveau [ VBIOS][0000:01:00.0] using image from PROM nouveau [ VBIOS][0000:01:00.0] BIT signature found nouveau [ VBIOS][0000:01:00.0] version 75.19.1b.00.01 nouveau [ DEVINIT][0000:01:00.0] adaptor not initialised nouveau [ VBIOS][0000:01:00.0] running init tables nouveau [ PMC][0000:01:00.0] MSI interrupts enabled nouveau W[ PFB][0000:01:00.0][0x00000000][c0000001fe455800] reclocking of this ram type unsupported nouveau [ PFB][0000:01:00.0] RAM type: DDR3 nouveau [ PFB][0000:01:00.0] RAM size: 1024 MiB nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags nouveau [ VOLT][0000:01:00.0] GPU voltage: 900000uv nouveau [ PTHERM][0000:01:00.0] FAN control: PWM nouveau [ PTHERM][0000:01:00.0] fan management: automatic nouveau [ PTHERM][0000:01:00.0] internal sensor: yes nouveau [ CLK][0000:01:00.0] 07: core 270 MHz memory 405 MHz nouveau [ CLK][0000:01:00.0] 0f: core 810 MHz memory 500 MHz nouveau [ CLK][0000:01:00.0] --: core 270 MHz memory 405 MHz [TTM] Zone kernel: Available graphics memory: 4091226 kiB [TTM] Zone dma32: Available graphics memory: 2097152 kiB [TTM] Initializing pool allocator [TTM] Initializing DMA pool allocator nouveau [ DRM] VRAM: 1024 MiB nouveau [ DRM] GART: 1048576 MiB nouveau [ DRM] TMDS table version 2.0 nouveau [ DRM] DCB version 4.0 nouveau [ DRM] DCB outp 00: 02000300 00000000 nouveau [ DRM] DCB outp 01: 01000302 00020030 nouveau [ DRM] DCB outp 02: 02011362 00020010 nouveau [ DRM] DCB outp 03: 04022310 00000000 nouveau [ DRM] DCB conn 00: 00001030 nouveau [ DRM] DCB conn 01: 00002161 nouveau [ DRM] DCB conn 02: 00000200 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. nouveau [ DRM] MM: using COPY0 for buffer copies nouveau 0000:01:00.0: No connectors reported connected with modes [drm] Cannot find any crtc or sizes - going 1024x768 nouveau [ DRM] allocated 1024x768 fb: 0x60000, bo c00000007e046c00 nouveau E[ PFIFO][0000:01:00.0] PBDMA0: (unknown bits 0x00004000) nouveau E[ PFIFO][0000:01:00.0] PBDMA0: ch 1 [DRM] subc 0 mthd 0x0000 data 0x00000000 nouveau E[ PFIFO][0000:01:00.0] PBDMA0: (unknown bits 0x00004000) nouveau E[ PFIFO][0000:01:00.0] PBDMA0: ch 1 [DRM] subc 0 mthd 0x0000 data 0x00000000 nouveau E[ PFIFO][0000:01:00.0] PBDMA0: (unknown bits 0x00004000) nouveau E[ PFIFO][0000:01:00.0] PBDMA0: ch 1 [DRM] subc 0 mthd 0x0000 data 0x00000000 nouveau E[ PFIFO][0000:01:00.0] PBDMA0: (unknown bits 0x00004000) nouveau E[ PFIFO][0000:01:00.0] PBDMA0: ch 1 [DRM] subc 0 mthd 0x0000 data 0x00000000 nouveau E[ PFIFO][0000:01:00.0] read fault at 0x0000700000 [PAGE_NOT_PRESENT] from PFIFO/PFIFO on channel] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device nouveau 0000:01:00.0: registered panic notifier [drm] Initialized nouveau 1.2.1 20120801 for 0000:01:00.0 on minor 0 brd: module loaded loop: module loaded fsl-sata ffe220000.sata: Sata FSL Platform/CSB Driver init scsi host0: sata_fsl ata1: SATA max UDMA/133 irq 68 fsl-sata ffe221000.sata: Sata FSL Platform/CSB Driver init scsi host1: sata_fsl ata2: SATA max UDMA/133 irq 69 fe8000000.flash: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x002801 Amd/Fujitsu Extended Query Table at 0x0040 Amd/Fujitsu Extended Query version 1.3. number of CFI chips: 1 ftl_cs: FTL header not found. nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xdc nand: Micron MT29F4G08ABADAWP nand: 512MiB, SLC, page size: 2048, OOB size: 64 nand: WARNING: fffa00000.flash: the ECC used on your system is too weak compared to the one required by thep Bad block table found at page 262080, version 0x01 Bad block table found at page 262016, version 0x01 6 ofpart partitions found on MTD device fffa00000.flash Creating 6 MTD partitions on "fffa00000.flash": 0x000000000000-0x000002000000 : "NAND U-Boot Image" ftl_cs: FTL header not found. 0x000002000000-0x000012000000 : "NAND Root File System" ftl_cs: FTL header not found. 0x000012000000-0x00001a000000 : "NAND Compressed RFS Image" ftl_cs: FTL header not found. 0x00001a000000-0x00001e000000 : "NAND Linux Kernel Image" ftl_cs: FTL header not found. 0x00001e000000-0x00001f000000 : "NAND DTB Image" ftl_cs: FTL header not found. 0x00001f000000-0x000020000000 : "NAND Writable User area" ftl_cs: FTL header not found. eLBC NAND device at 0xfffa00000, bank 2 fsl_espi ffe110000.spi: cs=0, init_csmode=0x100008 fsl_espi ffe110000.spi: master is unqueued, this is deprecated fsl_espi ffe110000.spi: at 0x80000800801d4000 (irq = 53) e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k e1000e: Copyright(c) 1999 - 2014 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver /soc@ffe000000/usb@210000: Invalid 'dr_mode' property, fallback to host mode fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1 fsl-ehci fsl-ehci.0: irq 44, io mem 0xffe210000 fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2 fsl-ehci fsl-ehci.1: irq 45, io mem 0xffe211000 fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected usbcore: registered new interface driver usb-storage i2c /dev entries driver mpc-i2c ffe118100.i2c: timeout 1000000 us mpc-i2c ffe119100.i2c: timeout 1000000 us rtc-ds3232 13-0068: rtc core: registered ds3232 as rtc0 mpc-i2c ffe118000.i2c: timeout 1000000 us mpc-i2c ffe119000.i2c: timeout 1000000 us sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman caam ffe300000.crypto: Entropy delay = 3200 caam ffe300000.crypto: Instantiated RNG4 SH0 caam ffe300000.crypto: Instantiated RNG4 SH1 caam ffe300000.crypto: device ID = 0x0a13010000000000 (Era 5) caam ffe300000.crypto: job rings = 4, qi = 1 caam algorithms registered in /proc/crypto caam_jr ffe301000.jr: registering rng-caam Freescale hypervisor management driver fsl-hv: no hypervisor found ipip: IPv4 over IPv4 tunneling driver TCP: cubic registered Initializing XFRM netlink socket NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 Key type dns_resolver registered rtc-ds3232 13-0068: setting system clock to 2015-01-30 14:37:29 UTC (1422628649) ata1: No Device OR PHYRDY change,Hstatus = 0xa0000000 ata1: SATA link down (SStatus 0 SControl 300) ata2: No Device OR PHYRDY change,Hstatus = 0xa0000000 ata2: SATA link down (SStatus 0 SControl 300) RAMDISK: gzip image found at block 0 VFS: Mounted root (ext2 filesystem) on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 292K (c000000000a09000 - c000000000a52000) procd: Console is alive procd: - preinit - random: mktemp urandom read with 5 bits of entropy available Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level mount_root: mounting /dev/root procd: - early - procd: - ubus - procd: - init - Please press Enter to activate this console. procd: - init complete - BusyBox v1.19.4 (2014-03-13 15:57:26 MSK) built-in shell (ash) Enter 'help' for a list of built-in commands. _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- BARRIER BREAKER (Bleeding Edge, r39583) ----------------------------------------------------- * 1/2 oz Galliano Pour all ingredients into * 4 oz cold Coffee an irish coffee mug filled * 1 1/2 oz Dark Rum with crushed ice. Stir. * 2 tsp. Creme de Cacao ----------------------------------------------------- root@OpenWrt:/# ls -l /dev/f fb0 full